ASYS The Perfect Match for Any Application

INSIGNUM_Laser_201215_PM_CC_E

INSIGNUM Laser – Power & Precision in Marking

Scaling from low-cost to high-end models the INSIGNUM Series covers all requirements of laser marking. The machines of the series could be used as offl ine and inline system. Thereby a matching CO2-laser or fi ber-laser is integrable for each application. Metals, synthetics or ceramics – the INSIGNUM Series offers an optimal marking solution for all kind of solid material.

The entry level model INSIGNUM 1000 Laser is equipped with a drawer system as standard. Furthermore the machine could be optionally extended with a transport system.

The INSIGNUM 2000 Laser reaches a lowest cycle time of 0.5 seconds per code (including handling and verifi cation) to mark 2D codes. Additionally, the high speed model reaches a high fl exibility as for the double-sided marking a fl ip-station is integrable as an option.

A complete marking unit including loading and unloading of PCBs offers the “midrange” model INSIGNUM 3000 Laser. The laser unit, which is mounted on the servo driven axis, enables marking areas up to 508 x 508 mm.

The high-end system of the INSIGNUM Series, the INSIGNUM 4000 Laser, convinces with highest precision and a top cycle time of less than 4.9 seconds for a complete marking process including handling. Thanks to an integrated fl ip-station the machine becomes even more effi cient. The complete fl ip handling takes 1.5 seconds. 

The fl exible INSIGNUM 6000 Laser platform implements customerspecifi c require-ments in the laser marking feld. This includes model variants for double track solutions, the processing of large-size PCBs and the marking of e.g. ceramics, plastics and DBC substrates. Module sizes smaller than 3mil can also be realized. Transport system and laser types are individually adapted to the process requirements.

Our service support speaks for itself

› ￦High quality service team› ￦24 hour service hotline› ￦Short reaction times› ￦Worldwide maintenance service, operator and process trainings› ￦Support via remote service› ￦Global service network with contact points in more than 40 countries

Visit our website.www.asys-group.com

worldwidemore than

installed systems

2000

INSIGNUM 1000Laser

INSIGNUM 2000Laser

INSIGNUM 3000Laser

INSIGNUM 4000Laser

INSIGNUM 6000Laser

Marking Area up to [mm]

350 × 350 (max. PCB size 460 × 460)

508 × 508

610 × 610

1000 × 610

Marking Criteria

Code size 3 mil

Code size 5 mil

Code size 7,5 mil

Verification

Scan after Print

Camera coupling using a galvo-mirror

2D Quality Check

Scan on the Fly at the inlet

Scan from below

OPTIMAP

RGB Lighting

Try & Check (Testmarking)

Good/Bad sorting

Software Solutions

INSIGNUM Product-Pool

INSIGNUM Offline-Programming-Tool

INSIGNUM Standard Interface

MES database connection

Transport

Dual lane

Dual lane felxible

Automatic width adjustment

Bidirectional Transport

External flip station

Integrated flip station

PCB thickness < 0,8 mm (1)

Side clamps

PCB support

Fast PCB Exchange

Right to left

Marking Unit

Fiber laser 20/40 watt

CO2 -laser 10 watt

Customized laser sources (e.g.Greenlight laser)

Adjustable focus (focus shifter)

Stationary laser from bottom

Position and Fiducial Recognition

Camera fiducial recognition

Camera bad-mark recognition

Camera type orientation check

Other

Exhaust

Remote access

RAID controller

Calibration Set

INSIGNUM Laser Model Overview and Options

Standard

Option

On Request

Upgrades

Line networking via IC-Net

Flexible dual lane version

Laser

CO2-Laser  10600  nm

Fiber Laser  1064  nm

Subject to change without notice. Some general descriptions and performance characteristics may not be applicable to all products. Technical specifications are subject to change without notice.Only features and technical data provided in purchasing contract are legally binding. Printed in Germany

PCB Size

(1)   Only with integrated flip station possible