Innovations 2014

JUMO AQUIS touch series

Modular multichannel measuring devices for liquid analysiswith integrated controller and paperless recorder

Type

s 20

2580

, 202

581

JUMO AQUIS touch S Type 202581

In a surface-mounted case with a 5.5-inch touchscreen for connecting up to 19 sensors

JUMO AQUIS touch P Type 202580

With a 3.5-inch touchscreen for panel installation (96 x 96 mm): enables up to 17 sensors to be connected

Scan QR-codefor further information

Measurands Display Control function Recording function

pH-value / redox potential Electrolytic conductivity Highly-purified water resis-

tance Temperature Disinfectant measurands:

free chlorine, total chlorine, chlorine dioxide, ozone, hy-drogen peroxide, peracetic acid

Level / filling level Flow / flow rate

Vibrant TFT-color graphics screen with touch function

Up to 15 languages can be configured – including languages with Cyrillic or non-European characters

Up to 4 high-quality control loops can be defined

Proven JUMO algorithms for P, PI, PD, and PID control

Autotuning procedure for determining the controller parameters

Integrated paperless re-corder for up to 8 analog measurands and 6 binary signals

Tamperproof data storage for meeting official record keeping obligations

If necessary, data can be ex-tracted and processed using separate software

Additional features:

Up to 9 analog outputs Up to 17 switching outputs that can be configured as

controller, limit value, or alarm outputs User-configurable screen masks Individually adjustable process screen for plant visualization Comprehensive math and logic functions Integrated timers (inc. calibration and wash timers) Modern communication interfaces:

Ethernet / LAN, PROFIBUS-DP, RS422 / 485, Modbus, USB Approvals: cULus (in preparation), others upon request

Measuring, displaying, controlling, and registering: four tasks – one solution

USP <645>

ASTM

Ph. Eur.

EN 27 888

JUMO DICON touch Two-channel process and program controller with paperless recorder and touchscreen

Precise control of two processes Vibrant TFT color graphics screen with a touch function Easy-to-use program entry and program control Field connection via different interfaces Integrated process data recording Individually adjustable process screen for plant visualization Flexible through modular hardware Plant security ensured by a password protected

user management system Approvals (in preparation): cULus, DIN EN 14597, GL, GOST

Type

703

571

The JUMO DICON touch process controller adapts perfectly to the individual requirements of each control operation. With a PC configuration program the user can create a process image which allows the display of measured values and relay status indications as well as the integration of entry fields. A process screen generated in this manner gives the user a particularly clear and complete impression of the plant.

Scan QR-codefor further information

Type

404

393

JUMO PINOS L01 Calorimetric flow sensor with short reaction time

For water and watery media Measuring range: 10 to 150 cm/s (nominal pressure

up to 25 bar) Reaction time: 4  s Simple mounting that is not dependent on direction (360°) Available as flow sensor with analog output 0(4) to 20 mA

or as flow switch (switching point can be adjusted on site) Easy to set up using the setup program via USB interface Durable version in protection type IP65 / IP67 Various fixtures as accessories

JUMO MAERA S29 SW High-resistance level measurement probe made of titanium with ATEX and GL approval

For continual filling level measurement Measuring ranges from 100 mbar to 10 bar Piezo-resistive measuring principle Titanium version with high resistance to chemicals, specifically

for chloride-based measuring materials Also for highly viscose, stringy measuring materials Analog output 4 to 20 mA (two-wire) Approvals (in preparation): ATEX (intrinsically safe), GL, GOST Broad range of accessories for a complete measuring point

solution

Type

406

040

Type

706

585

Type

s 20

2569

, 202

613

JUMO ecoLine O-DO Optical sensor for dissolved oxygen with JUMO AQUIS 500 RS display unit / controller

Long-term stability and low maintenance Smart, digital sensor based on the luminescence method High measuring accuracy, even for low concentrations Calibration data and history saved in the sensor electronics No cross-sensitivity to hydrogen sulfide (H2S) No need to replace electrolytes Short response time Digital interface

Certified temperature measuring chain

up to SIL3 with JUMO safetyM Safety temperature limiter / safety temperature monitor with a temperature sensor for functional safety – also for use in the Ex-area

Safe monitoring and switch-off of temperature processes

Functional safety up to SIL3 Performance level up to PL e Simple to configure and individually adjustable

in line with the respective application Explosion-protected variant according to ATEX directive Broad spectrum of temperature sensors available

(thermocouples and RTD temperature probe)

Since the JUMO safetyM approval has been extended to flexibly incorporate temperature sensors, a wide variety of sensors is now available in the JUMO product range. Diverse measurement technology tasks can therefore be completed safely with the ap-propriate sensors without the need for further SIL calculations.

JUMO LOGOSCREEN fd New functions for the paperless recorder with FDA approved data recording

Horizontal recorder image: as an alternative to the standard, vertical alignment a horizontal recorder image can also be generated

Channel extension: support for a total of 54 channels (analog or digital); the external signals can be imported via a Modbus, PROFIBUS, or Ethernet interface

SNTP time synchronization by establishing contact to a time server via Ethernet

Type

s 70

1150

, 701

155

JUMO mTRON T New functions for the scalable measurement, control, and automation system

Additional program generator type with procedural steps: for applications where the procedural steps are stipulated by the system manufacturer

Extended user management system: up to 50 different users are assigned to one of up to 16 user groups, with individual rights allocation per user group

Process screens with up to 16 defined levels:the individual process screen objects are each allocated to a level; visibility and editability of a level can then be set indi-vidually by the soft PLC with the aid of the user management system

Type

604

170

JUMO frostTHERM-ATE Electronic frost protection thermostat

Setting range +1 to +10 °C Operating mode: manual or automatic reset Membrane heating for operation up to -15 °C Self-monitoring of the probe line Two analog outputs 0 to 10 V One switching output (relay: max. AC 230 V / 6 A) Can be set without opening the case lid Electrical connection via tension spring terminals Operating voltage (SELV) AC 24 V

Type

705

000

Type

202

569,

Typ

e 20

2670

JUMO ecoLine NTU Optical sensor for measuring turbidity with JUMO AQUIS 500 RS display unit / controller

Durable sensor based on an infrared measurement (880 nm) according to the 90° scattered light principle

Long-term stability and low maintenance Measuring range: 0 to 4000 NTU Calibration data and history saved in the sensor electronics Digital interface Measurement according to DIN EN ISO 7027

Type

902

928

JUMO Wtrans E01 Measuring probe for humidity, temperature, and CO2 with wireless data transmission

Designed for stationary and mobile measurement by means of modern wireless technology with 868.4 MHz

High measuring accuracy across the entire measuring range Easy-to-use configuration and parameterization by means of

setup program or USB interface The mounting rail receiver of the device is available with serial

interface and / or analog output with/without relay contact Additional transmitters for pressure and temperature are

available within the JUMO Wtrans series A maximum of 16 Wtrans transmitters can be operated per

receiver

www.jumo.net

PR 0

0048

EN

/ 201

4-03

-03 /

0008

9443

www.jumo.net