Embed Size (px)
Citation preview
Member State : Malaysia
Date of Submission : 13 December 2011
Submitted by : Department of Standards Malaysia E-mail: [email protected]
No. National Standard
Number
Title of National Standard Year of
publication
* Green Mark Criteria Reference Standard
1 MS 1220:2010 PERFORMANCE AND CONSTRUCTION OF ELECTRIC
CIRCULATING FANS AND REGULATORS (2ND REVISION)
2010 ENERGY EFFICIENCY IEC 60879:1986
2 MS IEC 60929 :2008 AC SUPPLIED ELECTRONIC BALLASTS FOR TUBULAR
FLUORESCENT LAMPS-PERFORMANCE REQUIREMENTS
(FIRST REVISION) (IEC 60929:2006, IDT)
2008 ENERGY EFFICIENCY
IEC 60929:2006
3 11E008R0 RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY
AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION –
PART 9-1: MICROPOWER SYSTEMS
OTHER GREEN
FEATURESIEC/TS 62257-9-1:2008
4 11E009R0 RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY
AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION –
PART 9-2: MICROGRIDS
OTHER GREEN
FEATURESIEC/TS 62257-9-2:2006
5 11E010R0 RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY
AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION –
PART 9-3:INTEGRATED SYSTEM – USER INTERFACE
OTHER GREEN
FEATURESIEC/TS 62257-9-3:2006
6 11E011R0 RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY
AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION –
PART 9-4: INTEGRATED SYSTEM – USER INSTALLATION
OTHER GREEN
FEATURESIEC/TS 62257-9-4:2006
7 11E012R0 SAFETY OF POWER CONVERTERS FOR USE IN
PHOTOVOLTAIC POWER SYSTEMS – PART 1: GENERAL
REQUIREMENTS
OTHER GREEN
FEATURES IEC 62109-1:2010
8 11E063R0 BALANCE-OF-SYSTEM COMPONENTS FOR
PHOTOVOLTAIC SYSTEMS – DESIGN QUALIFICATION
NATURAL ENVIRONMENTS
OTHER GREEN
FEATURESIEC 62093:2005
9 11E064R0 TEST PROCEDURE OF ISLANDING PREVENTION
MEASURES FOR UTILITY-INTERCONNECTED
PHOTOVOLTAIC INVERTERS
OTHER GREEN
FEATURESIEC 62116:2008
10 11E065R0 BATTERY CHARGE CONTROLLERS FOR PHOTOVOLTAIC
SYSTEMS – PERFORMANCE AND FUNCTIONING
OTHER GREEN
FEATURES IEC 62509:2010
11 11E066R0 GRID CONNECTED PHOTOVOLTAIC SYSTEMS – MINIMUM
REQUIREMENTS FOR SYSTEM DOCUMENTATION,
COMMISSIONING TESTS AND INSPECTION
OTHER GREEN
FEATURESIEC 62446:2009
Information on Existing Standards Related to Green Building
*NB - To be classified as one of the following: 1. Energy Efficiency 2. Water Efficiency 3. Environmental Protection 4. Indoor Environmental Quality 5. Other Green Features
12 MS 1596 : 2003 DETERMINATION OF CONCENTRATION AND MASS FLOW
OF PARTICULATE MATTER IN FLUE GAS FOR STATIONARY
SOURCE EMISSIONS
2003 ENVIRONMENTAL
PROTECTION ISO 9096:1992
13 MS 1723 : 2003 PERFORMANCE EVALUATION OF AIR POLLUTION
CONTROL AND TREATMENT SYSTEMS : MECHANICAL
DUST COLLECTORS
2003 ENVIRONMENTAL
PROTECTIONNONE
14 MS ISO 14001 : 2004 ENVIRONMENTAL MANAGEMENT SYSTEMS –
REQUIREMENTS WITH GUIDANCE FOR USE (FIRST
REVISION) (ISO 14001:2004, IDT)
2004 ENVIRONMENTAL
PROTECTION ISO 14001:2004
15 MS ISO 14004 : 2004 ENVIRONMENTAL MANAGEMENT SYSTEMS – GENERAL
GUIDELINES ON PRINCIPLES, SYSTEMS AND
SUPPORTING TECHNIQUES (FIRST REVISION) (ISO
14004:2004, IDT)
2004 ENVIRONMENTAL
PROTECTIONISO 14004:2004
16 MS ISO 14015 : 2003 ENVIRONMENTAL MANAGEMENT – ENVIRONMENTAL
ASSESSMENT OF SITES AND ORGANISATIONS (EASO)
2003 ENVIRONMENTAL
PROTECTION NONE
17 MS ISO 14021 : 2000 ENVIRONMENTAL LABELS AND DECLARATIONS – SELF-
DECLARED ENVIRONMENTAL CLAIMS (TYPE II
ENVIRONMENTAL LABELLING)
2000 ENVIRONMENTAL
PROTECTION NONE
18 MS ISO 14024 : 2000 ENVIRONMENTAL LABELS AND DECLARATIONS – TYPE I
ENVIRONMENTAL LABELLING – PRINCIPLES AND
PROCEDURES (ISO 14024:1999, IDT)
2000 ENVIRONMENTAL
PROTECTION ISO 14024:1999
19 MS ISO 14031 : 2001 ENVIRONMENTAL MANAGEMENT – ENVIRONMENTAL
PERFORMANCE EVALUATION – GUIDELINES
2001 ENVIRONMENTAL
PROTECTION NONE
20 MS ISO 14050:2001 ENVIRONMENTAL MANAGEMENT - VOCABULARY 2001 ENVIRONMENTAL
PROTECTION NONE
21 MS ISO 14064: Part
1:2006
GREENHOUSE GASES - PART 1: SPECIFICATION WITH
GUIDANCE AT THE ORGANIZATION LEVEL FOR
QUANTIFICATION AND REPORTING OF GREENHOUSE GAS
EMISSIONS AND REMOVALS (ISO 14064-1:2006, IDT)
2006 ENVIRONMENTAL
PROTECTION
ISO 14064-1:2006
22 MS ISO 14064: Part
2:2006
GREENHOUSE GASES - PART 2: SPECIFICATION WITH
GUIDANCE AT THE PROJECT LEVEL FOR
QUANTIFICATION, MONITORING AND REPORTING OF
GREENHOUSE GAS EMISSION REDUCTIONS OR
REMOVAL ENHANCEMENTS (ISO 14064-1:2006, IDT)
2006 ENVIRONMENTAL
PROTECTION
ISO 14064-1:2006
23 MS ISO 14064: Part
3:2006
GREENHOUSE GASES - PART 3: SPECIFICATION WITH
GUIDANCE FOR THE VALIDATION AND VERIFICATION OF
GREENHOUSE GAS ASSERTIONS (ISO 14064-3:2006, IDT)
2006 ENVIRONMENTAL
PROTECTION ISO 14064-3:2006
24 MS ISO 10498:2007 AMBIENT AIR - DETERMINATION OF SULFUR DIOXIDE -
ULTRAVIOLET FLUORESCENCE METHOD
(ISO 10498:2004, IDT)
2007 ENVIRONMENTAL
PROTECTION ISO 10498:2004
25 MS ISO 16362:2007 AMBIENT AIR - DETERMINATION OF PARTICLE-PHASE
POLYCYCLIC AROMATIC HYDROCARBONS BY HIGH
PERFORMANCE LIQUID
CHROMATOGRAPHY (ISO 16362:2005, IDT)
2007 ENVIRONMENTAL
PROTECTION ISO 16362:2005
26 MS ISO 16622:2007 METEOROLOGY - SONIC
ANEMOMETERS/THERMOMETERS -ACCEPTANCE TEST
METHODS FOR MEAN WIND MEASUREMENTS (ISO
16622:2002, IDT)
2007 ENVIRONMENTAL
PROTECTION
ISO 16622:2002
27 MS 1963:2007 AIR QUALITY - DETERMINATION OF ODOUR
CONCENTRATION BY DYNAMIC OLFACTOMETRY
2007 ENVIRONMENTAL
PROTECTION EN 13725:2003
28 MS ISO 14063:2007 ENVIRONMENTAL MANAGEMENT- ENVIRONMENTAL
COMMUNICATION - GUIDELINES AND EXAMPLES (ISO
14063:2006, IDT)
2007 ENVIRONMENTAL
PROTECTIONISO 14063:2006
29 MS ISO 14025:2007 ENVIRONMENTAL LABELS AND DECLARATIONS - TYPE
111 ENVIRONMENTAL DECLARATIONS - PRINCIPLES AND
PROCEDURES (ISO 14025:2006, IDT)
2007 ENVIRONMENTAL
PROTECTION ISO 14025:2006
30 MS ISO 14020 : 2007 ENVIRONMENTAL LABELS AND DECLARATIONS -GENERAL
PRINCIPLES LABELS AND DECLARATIONS-GENERAL
PRINCIPLES (FIRST REVISION) (ISO 14020:2000, IDT)
2007 ENVIRONMENTAL
PROTECTIONISO 14020:2000
31 MS ISO 14040 :2008 ENVIRONMENTAL MANAGEMENT - LIFE CYCLE
ASSESSMENT - PRINCIPLES AND FRAMEWORK (FIRST
REVISION) (ISO 14040:2006, IDT)
2008 ENVIRONMENTAL
PROTECTION ISO 14040:2006
32 MS ISO 16000-1:2008 INDOOR AIR - PART 1: GENERAL ASPECTS OF SAMPLING
STRATEGY (ISO 16000-1:2004, IDT)
2008 INDOOR
ENVIRONMENTAL
QUALITYISO 16000-1:2004
33 MS ISO 16000-2 :2008 INDOOR AIR PART 2: SAMPLING STRATEGY FOR
FORMALDEHYDE (ISO 16000-2:2004, IDT)
2008 INDOOR
ENVIRONMENTAL
QUALITYISO 16000-2:2004
34 MS ISO 16000-3 :2008 INDOOR AIR - PART 3: DETERMINATION OF
FORMALDEHYDE AND OTHER CARBONYL CAOMPOUNDS -
ACTIVE SAMPLING METHOD (ISO 16000-3: 2001, IDT)
2008 INDOOR
ENVIRONMENTAL
QUALITY ISO 16000-3: 2001
35 MS ISO 16000-4 :2008 INDOOR AIR - PART 4: DETEMINATION OF
FORMALDEHYDE - DIFFUSIVE SAMPLING METHOD (ISO
16000-4: 2004, IDT)
2008 INDOOR
ENVIRONMENTAL
QUALITYISO 16000-4: 2004
36 MS ISO 16000-5 :2008 INDOOR AIR - PART 5 : SAMPLING STRATEGY FOR
VOLATILE ORGANIC COMPOUNDS (VOCS) (ISO 16000-5:
2007, IDT)
2008 INDOOR
ENVIRONMENTAL
QUALITY16000-5: 2007
37 MS ISO 16017-1 :2008 INDOOR, AMBIENT AND WORKPLACE AIR - SAMPLING
AND ANALYSIS OF VOLATILE ORGANIC COMPOUNDS BY
SORBENT TUBE/THERMAL DESORPTION/ CAPILLAY GAS
CHROMATOGRAPHY - PART 1: PUMPED SAMPLING (ISO
16017-1: 2003, IDT)
2008 INDOOR
ENVIRONMENTAL
QUALITYISO 16017-1: 2003
38 MS ISO 16017-2 :2008 INDOOR, AMBIENT AND WORKPLACE AIR - SAMPLING
AND ANALYSIS OF VOLATILE ORGANIC COMPOUNDS BY
SORBENT TUBE/ THERMAL DESORPTION/ CAPILLARY GAS
CHROMATOGRAPHY - PART 2: DIFFUSIVE SAMPLING (ISO
16017-2: 2003, IDT)
2008 INDOOR
ENVIRONMENTAL
QUALITYISO 16017-2: 2003
39 MS ISO 14044:2008 ENVIRONMENTAL MANAGEMENT - LIFE CYCLE
ASSESSMENT - REQUIREMENTS AND GUIDELINES (ISO
14044:2006, IDT)
2008 ENVIRONMENTAL
PROTECTIONISO 14044:2006
40 MS 2074:2008 PRACTICE FOR SAMPLING USING A TRIER SAMPLER 2008 ENVIRONMENTAL
PROTECTIONASTM D 5451-93
(Reapproved 2004)
41 MS 2075:2008 PRACTICE FOR SAMPLING WITH A COMPOSITE LIQUID
WASTE SAMPLER (COLIWASA)
2008 ENVIRONMENTAL
PROTECTION ASTM D 5495-03
42 MS 2076:2008 PRACTICE FOR SAMPLING WITH A SCOOP 2008 ENVIRONMENTAL
PROTECTION ASTM D 5633-04
43 MS 2077:2008 PRACTICE FOR SAMPLING WITH A DIPPER OR POND
SAMPLER
2008 ENVIRONMENTAL
PROTECTIONASTM D 5358-93
(Reapproved 2003)
44 MS 2078:2008 PRACTICE FOR SAMPLING SINGLE OR MULTILAYERED
LIQUIDS, WITH OR WITHOUT SOLIDS, IN DRUMS OR
SIMILAR CONTAINERS
2008 ENVIRONMENTAL
PROTECTION ASTM D 5743-97
(Reapproved 2003)
45 MS ISO 4225:2008 AIR QUALITY - GENERAL ASPECTS - VOCABULARY (ISO
4225:1994, IDT)
2008 ENVIRONMENTAL
PROTECTION ISO 4225:1994
46 MS ISO 8756:2008 AIR QUALITY - HANDLING OF TEMPERATURE, PRESSURE
AND HUMIDITY DATA (ISO 8756:1994, IDT)
2008 ENVIRONMENTAL
PROTECTION ISO 8756:1994
47 MS ISO 4226:2008 AIR QUALITY - GENERAL ASPECTS - UNITS OF
MEASUREMENT (ISO 4226:1993, IDT)
2008 ENVIRONMENTAL
PROTECTION ISO 4226:1993
48 MS 2073:2008 ECO-LABELLING CRITERIA FOR ENVIRONMENTALLY
DEGRADABLE PLASTICS PACKAGING MATERIAL
2008 OTHER GREEN
FEATURES NONE
49 MS 2072:2008 GUIDELINES FOR DEVELOPING AND IMPLEMENTING
EARLY ACTION FOR SITE REMEDIATION
2008 ENVIRONMENTAL
PROTECTION NONE
50 MS 2070: Part 2:2008 SCHEDULED WASTE - SAMPLING TECHNICAL GUIDE -
PART 2: DESCRIPTION OF MEDIA AND DEVICE SELECTION
GUIDE
2008 ENVIRONMENTAL
PROTECTION NONE
51 MS ISO 16000-6:2008 INDOOR AIR - PART 6 : DETERMINATION OF VOLATILE
ORGANIC COMPOUNDS IN INDOOR AND TEST CHAMBER
AIR BY ACTIVE SAMPLING ON TENAX TA SORBENT,
THERMAL DESORPTION AND GAS CHROMATOGRAPHY
(ISO 16000-6: 2004, IDT)
2008 INDOOR
ENVIRONMENTAL
QUALITY ISO 16000-6: 2004
52 MS ISO 16000-8:2008 INDOOR AIR - PART 8: DETERMINATION OF LOCAL MEANS
OF AGES OF AIR IN BUILDINGS FOR CHARACTERIZING
VENTILATION CONDITIONS (ISO 16000 - 8: 2007, IDT)
2008 INDOOR
ENVIRONMENTAL
QUALITY ISO 16000 - 8: 2007
53 MS 2079:2008 PRACTICES FOR DECONTAMINATION OF FIELD
EQUIPMENT USED AT WASTE SITES
2008 ENVIRONMENTAL
PROTECTION ASTM D 5088-02
54 MS 2080:2008 ECOLABELING CRITERIA FOR RECYCLED PAPER 2008 OTHER GREEN
FEATURES NONE
55 MS 1785:2008 GUIDE FOR GENERAL PLANNING OF WASTE SAMPLING 2008 ENVIRONMENTAL
PROTECTIONASTM D4687-95
(Reapproved 2001)
56 MS ISO 9169:2008 AIR QUALITY - DEFINITION AND DETERMINATION OF
PERFORMANCE CHARACTERISTICS OF AN AUTOMATIC
MEASURING SYSTEM (ISO 9169:2006, IDT)
2008 ENVIRONMENTAL
PROTECTION ISO 9169:2006
57 MS ISO 16000-9:2008 INDOOR AIR - PART 9: DETERMINATION OF THE EMISSION
OF VOLATILE ORGANIC COMPOUNDS FROM BUILDING
PRODUCTS AND FURNISHING - EMISSION TEST CHAMBER
METHOD (ISO 16000-9:2006, IDT)
2008 INDOOR
ENVIRONMENTAL
QUALITY ISO 16000-9:2006
58 MS ISO 16000-10:2008 INDOOR AIR - PART 10: DETERMINATION OF THE
EMISSION OF VOLATILE ORGANIC COMPOUNDS FROM
BUILDING PRODUCTS AND FURNISHING - EMISSION TEST
CELL METHOD (ISO 16000-10:2006)
2008 INDOOR
ENVIRONMENTAL
QUALITY ISO 16000-10:2006
59 MS ISO 16000-11:2008 INDOOR AIR - PART 11: DETERMINATION OF THE
EMISSION OF VOLATILE ORGANIC COMPOUNDS FROM
BUILDING PRODUCTS AND FURNISHING - SAMPLING,
STORAGE OF SAMPLES AND PREPARATION OF TEST
SPECIMENS (ISO 16000-11:2006, IDT)
2008 INDOOR
ENVIRONMENTAL
QUALITYISO 16000-11:2006
60 MS 2225:2009 ECOLABELLING CRITERIA FOR BIODEGRADABLE
CLEANING AGENTS
2009 OTHER GREEN
FEATURES NONE
61 MS ISO 14065:2009 GREENHOUSE GASES - REQUIREMENTS FOR
GREENHOUSE GAS VALIDATION AND VERIFICATION
BODIES FOR USE IN ACCREDITATION OR OTHER FORMS
OF RECOGNITION (ISO 14065:2007, IDT)
2009 ENVIRONMENTAL
PROTECTION
ISO 14065:2007
62 MS 2220:2009 PRACTICE FOR SAMPLING CONSOLIDATED SOLIDS IN
DRUMS OR SIMILAR CONTAINERS
2009 ENVIRONMENTAL
PROTECTIONASTM D 5679-95a
(Reapproved 2006)
63 MS 2221:2009 PRACTICE FOR SAMPLING WASTES FROM PIPES AND
OTHER POINT DISCHARGES
2009 ENVIRONMENTAL
PROTECTIONASTM D 5013-89
(Reapproved 2003)
64 MS ISO 10780:2009 STATIONARY SOURCE EMISSIONS - MEASUREMENT OF
VELOCITY AND VOLUME FLOWRATE OF GAS STREAMS IN
DUCTS (ISO 10780:1994 (2005), IDT)
2009 ENVIRONMENTAL
PROTECTION
ISO 10780:1994 (2005)
65 MS ISO 12039:2009 STATIONARY SOURCE EMISSIONS -DETERMINATION OF
CARBON MONOXIDE, CARBON DIOXIDE AND OXYGEN -
PERFORMANCE CHARACTERISTICS AND CALIBRATION OF
AUTOMATED MEASURING SYSTEMS (ISO 12039:2001
(2006), IDT)
2009 ENVIRONMENTAL
PROTECTION
ISO 12039:2001 (2006)
66 MS ISO 11564:2009 STATIONARY SOURCE EMISSIONS - DETERMINATION OF
THE MASS CONCENTRATION OF NITROGEN OXIDES -
NAPHTHYLETHYLENEDIAMINE PHOTOMETRIC METHOD
(ISO 11564:1998 (2004), IDT)
2009 ENVIRONMENTAL
PROTECTION
ISO 11564:1998 (2004)
67 MS ISO 11632:2009 STATIONARY SOURCE EMISSIONS - DETERMINATION OF
MASS CONCENTRATION OF SULFUR DIOXIDE - ION
CHROMATOGRAPHY METHOD (ISO 11632:1998 (2004), IDT)
2009 ENVIRONMENTAL
PROTECTIONISO 11632:1998 (2004)
68 MS ISO 15713:2009 STATIONARY SOURCE EMISSIONS - SAMPLING AND
DETERMINATION OF GASEOUS FLUORIDE CONTENT (ISO
15713:2006, IDT)
2009 ENVIRONMENTAL
PROTECTIONISO 15713:2006
69 MS ISO 17713-1:2009 METEOROLOGY - WIND MEASUREMENTS - PART 1: WIND
TUNNEL TEST METHODS FOR ROTATING ANEMOMETER
PERFORMANCE (ISO 17713-1:2007, IDT)
2009 ENVIRONMENTAL
PROTECTIONISO 17713-1:2007
70 MS ISO 17714:2009 METEOROLOGY — AIR TEMPERATURE MEASUREMENTS
— TEST METHODS FOR COMPARING THE PERFORMANCE
OF THERMOMETER SHIELDS/SCREENS AND DEFINING
IMPORTANT CHARACTERISTICS (ISO 17714:2007, IDT)
2009 ENVIRONMENTAL
PROTECTION
ISO 17714:2007
71 MS 2237:2009 ECOLABELLING CRITERIA FOR ELECTRICAL AND
ELECTRONIC EQUIPMENT AND COMPONENTS WITH
RESTRICTED HAZARDOUS SUBSTANCES
2009 OTHER GREEN
FEATURES i) Directive 2002/95/EC,
Restriction of the use of
certain hazardous
substances in
electrical and electronic
equipment (RoHS); and
ii) Directive 2002/96/EC,
Waste electrical and
electronic equipment (WEEE)
72 MS 2248:2009 GENERATION OF ENVIRONMENTAL DATA RELATED TO
WASTE MANAGEMENT ACTIVITIES - QUALITY ASSURANCE
AND QUALITY CONTROL PLANNING AND
IMPLEMENTATION
2009 ENVIRONMENTAL
PROTECTIONASTM D 5283 - 92
(Reapproved 2003)
73 MS ISO 16000-7:2009 INDOOR AIR - PART 7: SAMPLING STRATEGY FOR
DETERMINATION OF AIRBORNE ASBESTOS FIBRE
CONCENTRATIONS (ISO 16000-7:2007, IDT)
2009 INDOOR
ENVIRONMENTAL
QUALITYISO 16000-7:2007
74 MS ISO 16000-12:2009 INDOOR AIR - PART 12: SAMPLING STRATEGY FOR
POLYCHLORINATED BIPHENYLS (PCBS),
POLYCHLORINATED DIBENZO-P-DIOXINS (PCDDS),
POLYCHLORINATED DIBENZOFURANS (PCDFS) AND
POLYCYCLIC AROMATIC HYDROCARBONS (PAHS) (ISO
16000-12:2008, IDT)
2009 INDOOR
ENVIRONMENTAL
QUALITYISO 16000-12:2008
75 MS ISO 9359:2009 AIR QUALITY - STRATIFIED SAMPLING METHOD FOR
ASSESSMENT OF AMBIENT AIR QUALITY (ISO 9359:1989,
IDT)
2009 ENVIRONMENTAL
PROTECTION ISO 9359:1989
76 MS ISO 11222:2009 AIR QUALITY - DETERMINATION OF THE UNCERTAINTY OF
THE TIME AVERAGE OF AIR QUALITY MEASUREMENTS
(ISO 11222:2002, IDT)
2009 ENVIRONMENTAL
PROTECTIONISO 11222:2002
77 MS 2303:2010 WASTES AND WASTE MANAGEMENT - TERMINOLOGY 2010 ENVIRONMENTAL
PROTECTION NONE
78 MS 2305:2010 PRACTICE FOR SAMPLING UNCONSOLIDATED SOLIDS IN
DRUMS OR SIMILAR CONTAINERS
2010 ENVIRONMENTAL
PROTECTION ASTM D 5680-95a (2001)
79 MS ISO 14956:2010 AIR QUALITY - EVALUATION OF THE SUITABILITY OF A
MEASUREMENT PROCEDURE BY COMPARISON WITH A
REQUIRED MEASUREMENT UNCERTAINTY (ISO
14956:2002, IDT)
2010 ENVIRONMENTAL
PROTECTIONISO 14956:2002
80 MS ISO 7934:2010 STATIONARY SOURCE EMISSIONS - DETERMINATION OF
THE MASS CONCENTRATION OF SULFUR DIOXIDE -
HYDROGEN PEROXIDE/BARIUM PERCHLORATE/THORIN
METHOD (ISO 7934:1989, IDT)
2010 ENVIRONMENTAL
PROTECTIONISO 7934:1989
81 MS 2304:2010 PRACTICE FOR MANAGING SCHEDULED WASTE
CONTAINERS
2010 ENVIRONMENTAL
PROTECTION NONE
82 MS ISO 16000-13:2010 INDOOR AIR - PART 13: DETERMINATION OF TOTAL (GAS
AND PARTICLE-PHASE) POLYCHLORINATED DIOXIN-LIKE
BIPHENYLS (PCBS) AND POLYCHLORINATED DIBENZO-P-
DIOXINS/DIBENZOFURANS (PCDDS/PCDFS) - COLLECTION
ON SORBENT-BACKED FILTERS (ISO 16000-13:2008, IDT)
2010 INDOOR
ENVIRONMENTAL
QUALITY
ISO 16000-13:2008
83 MS ISO 16000-14:2010 INDOOR AIR - PART 14: DETERMINATION OF TOTAL (GAS
AND PARTICLE-PHASE) POLYCHLORINATED DIOXIN-LIKE
BIPHENYLS (PCBS) AND POLYCHLORINATED DIBENZO-P-
DIOXINS/DIBENZOFURANS (PCDDS/PCDFS) -
EXTRACTION, CLEAN-UP AND ANALYSIS BY HIGH-
RESOLUTION GAS CHROMATOGRAPHY AND MASS
SPECTROMETRY (ISO 16000-14:2009, IDT)
2010 INDOOR
ENVIRONMENTAL
QUALITY
ISO 16000-14:2009
84 MS ISO 7168-1:2010 AIR QUALITY - EXCHANGE OF DATA - PART 1: GENERAL
DATA FORMAT (ISO 7168-1:1999, IDT)
2010 ENVIRONMENTAL
PROTECTION ISO 7168-1:1999
85 MS ISO 7168-2:2010 AIR QUALITY - EXCHANGE OF DATA - PART 2:
CONDENSED DATA FORMAT (ISO 7168-2:1999, IDT)
2010 ENVIRONMENTAL
PROTECTION ISO 7168-2:1999
86 MS ISO 14050:2010 ENVIRONMENTAL MANAGEMENT – VOCABULARY (FIRST
REVISION)
(ISO 14050:2009, IDT)
2010 ENVIRONMENTAL
PROTECTIONISO 14050:2009
87 MS 2361:2010 RECOVERED WASTE OIL – SPECIFICATION 2010 ENVIRONMENTAL
PROTECTION NONE
88 MS ISO 16000-15:2011 INDOOR AIR - PART 15: SAMPLING STRATEGY FOR
NITROGEN DIOXIDE (NO2) (ISO 16000-15:2008, IDT)
2011 INDOOR
ENVIRONMENTAL
QUALITY
ISO 16000-15:2008
89 MS ISO 16000-16 :2011 INDOOR AIR - PART 16: DETECTION AND ENUMERATION
OF MOULDS - SAMPLING BY FILTRATION (ISO 16000-
16:2008, IDT)
2011 INDOOR
ENVIRONMENTAL
QUALITYISO 16000-16:2008
90 MS ISO 16000-17 :2011 INDOOR AIR - PART 17: DETECTION AND ENUMERATION
OF MOULDS - CULTURE-BASED METHOD (ISO 16000-
17:2008, IDT)
2011 INDOOR
ENVIRONMENTAL
QUALITY ISO 16000-17:2008
91 MS ISO 7935:2011 STATIONARY SOURCE EMISSIONS - DETERMINATION OF
THE MASS CONCENTRATION OF SULFUR DIOXIDE -
PERFORMANCE CHARACTERISTICS OF AUTOMATED
MEASURING METHODS (ISO 7935:1992, IDT)
2011 ENVIRONMENTAL
PROTECTION
ISO 7935:1992
92 MS ISO 10155:2011 STATIONARY SOURCE EMISSIONS - AUTOMATED
MONITORING OF MASS CONCENTRATIONS OF PARTICLES
- PERFORMANCE CHARACTERISTICS, TEST METHODS
AND SPECIFICATIONS (ISO 10155:1995, COR. 1:2002, IDT)
2011 ENVIRONMENTAL
PROTECTIONISO 10155:1995, COR.
1:2002
93 MS ISO 10396:2011 STATIONARY SOURCE EMISSIONS - SAMPLING FOR THE
AUTOMATED DETERMINATION OF GAS EMISSION
CONCENTRATIONS FOR PERMANENTLY-INSTALLED
MONITORING SYSTEMS (ISO 10396:2007, IDT)
2011 ENVIRONMENTAL
PROTECTION
ISO 10396:2007
94 MS ISO 10849:2011 STATIONARY SOURCE EMISSIONS - DETERMINATION OF
THE MASS CONCENTRATION OF NITROGEN OXIDES -
PERFORMANCE CHARACTERISTICS OF AUTOMATED
MEASURING SYSTEMS (ISO 10849:1996, IDT)
2011 ENVIRONMENTAL
PROTECTION
ISO 10849:1996
95 MS ISO 11338-1:2011 STATIONARY SOURCE EMISSIONS - DETERMINATION OF
GAS AND PARTICLE-PHASE POLYCYCLIC AROMATIC
HYDROCARBONS - PART 1: SAMPLING (ISO 11338-1:2003,
IDT)
2011 ENVIRONMENTAL
PROTECTIONISO 11338-1:2003
96 MS ISO 11338-2:2011 STATIONARY SOURCE EMISSIONS - DETERMINATION OF
GAS AND PARTICLE-PHASE POLYCYCLIC AROMATIC
HYDROCARBONS - PART 2: SAMPLE PREPARATION,
CLEAN-UP AND DETERMINATION (ISO 11338-2:2003, IDT)
2011 ENVIRONMENTAL
PROTECTION
ISO 11338-2:2003
97 MS ISO 1214:2011 STATIONARY SOURCE EMISSIONS - DETERMINATION OF
MASS CONCENTRATION OF PARTICULATE MATTER
(DUST) AT LOW CONCENTRATIONS - MANUAL
GRAVIMETRIC METHOD (ISO 12141:2002, IDT)
2011 ENVIRONMENTAL
PROTECTION
ISO 12141:2002
98 MS ISO 14164:2011 STATIONARY SOURCE EMISSIONS - DETERMINATION OF
THE VOLUME FLOWRATE OF GAS STREAMS IN DUCTS -
AUTOMATED METHOD (ISO 14164:1999, IDT)
2011 ENVIRONMENTAL
PROTECTIONISO 14164:1999
99 MS ISO 16000-1:2008 INDOOR AIR - PART 1: GENERAL ASPECTS OF SAMPLING
STRATEGY (ISO 16000-1:2004, IDT)
2008 INDOOR
ENVIRONMENTAL
QUALITY
ISO 16000-1:2004
100 MS ISO 16000-2 :2008 INDOOR AIR PART 2: SAMPLING STRATEGY FOR
FORMALDEHYDE (ISO 16000-2:2004, IDT)
2008 INDOOR
ENVIRONMENTAL
QUALITYISO 16000-2:2004
101 MS ISO 16000-3 :2008 INDOOR AIR - PART 3: DETERMINATION OF
FORMALDEHYDE AND OTHER CARBONYL CAOMPOUNDS -
ACTIVE SAMPLING METHOD (ISO 16000-3: 2001, IDT)
2008 INDOOR
ENVIRONMENTAL
QUALITYISO 16000-3: 2001
102 MS ISO 16000-4 :2008 INDOOR AIR - PART 4: DETEMINATION OF
FORMALDEHYDE - DIFFUSIVE SAMPLING METHOD (ISO
16000-4: 2004, IDT)
2008 INDOOR
ENVIRONMENTAL
QUALITY ISO 16000-4: 2004
103 MS ISO 16000-5 :2008 INDOOR AIR - PART 5 : SAMPLING STRATEGY FOR
VOLATILE ORGANIC COMPOUNDS (VOCS) (ISO 16000-5:
2007, IDT)
2008 INDOOR
ENVIRONMENTAL
QUALITY ISO 16000-5: 2007
104 MS ISO 16017-1 :2008 INDOOR, AMBIENT AND WORKPLACE AIR - SAMPLING
AND ANALYSIS OF VOLATILE ORGANIC COMPOUNDS BY
SORBENT TUBE/THERMAL DESORPTION/ CAPILLAY GAS
CHROMATOGRAPHY - PART 1: PUMPED SAMPLING (ISO
16017-1: 2003, IDT)
2008 INDOOR
ENVIRONMENTAL
QUALITY ISO 16017-1: 2003
105 MS ISO 16017-2 :2008 INDOOR, AMBIENT AND WORKPLACE AIR - SAMPLING
AND ANALYSIS OF VOLATILE ORGANIC COMPOUNDS BY
SORBENT TUBE/ THERMAL DESORPTION/ CAPILLARY GAS
CHROMATOGRAPHY - PART 2: DIFFUSIVE SAMPLING (ISO
16017-2: 2003, IDT)
2008 INDOOR
ENVIRONMENTAL
QUALITY ISO 16017-2: 2003
106 MS ISO 16000-6:2008 INDOOR AIR - PART 6 : DETERMINATION OF VOLATILE
ORGANIC COMPOUNDS IN INDOOR AND TEST CHAMBER
AIR BY ACTIVE SAMPLING ON TENAX TA SORBENT,
THERMAL DESORPTION AND GAS CHROMATOGRAPHY
(ISO 16000-6: 2004, IDT) (ISO 16000 - 6:2004, IDT)
2008 INDOOR
ENVIRONMENTAL
QUALITYISO 16000 - 6: 2004
107 MS ISO 16000-8:2008 INDOOR AIR - PART 8: DETERMINATION OF LOCAL MEANS
OF AGES OF AIR IN BUILDINGS FOR CHARACTERIZING
VENTILATION CONDITIONS (ISO 16000 - 8: 2007, IDT)
2008 INDOOR
ENVIRONMENTAL
QUALITYISO 16000 - 8: 2007
108 MS ISO 16000-9:2008 INDOOR AIR - PART 9: DETERMINATION OF THE EMISSION
OF VOLATILE ORGANIC COMPOUNDS FROM BUILDING
PRODUCTS AND FURNISHING - EMISSION TEST CHAMBER
METHOD (ISO 16000-9:2006, IDT)
2008 INDOOR
ENVIRONMENTAL
QUALITY ISO 16000-9:2006
109 MS ISO 16000-10:2008 INDOOR AIR - PART 10: DETERMINATION OF THE
EMISSION OF VOLATILE ORGANIC COMPOUNDS FROM
BUILDING PRODUCTS AND FURNISHING - EMISSION TEST
CELL METHOD (ISO 16000-10:2006)
2008 INDOOR
ENVIRONMENTAL
QUALITYISO 16000-10:2006
110 MS ISO 16000-11:2008 INDOOR AIR - PART 11: DETERMINATION OF THE
EMISSION OF VOLATILE ORGANIC COMPOUNDS FROM
BUILDING PRODUCTS AND FURNISHING - SAMPLING,
STORAGE OF SAMPLES AND PREPARATION OF TEST
SPECIMENS (ISO 16000-11:2006, IDT)
2008 INDOOR
ENVIRONMENTAL
QUALITYISO 16000-11:2006
111 MS ISO 16000-7:2009 INDOOR AIR - PART 7: SAMPLING STRATEGY FOR
DETERMINATION OF AIRBORNE ASBESTOS FIBRE
CONCENTRATIONS (ISO 16000-7:2007, IDT)
2009 INDOOR
ENVIRONMENTAL
QUALITYISO 16000-7:2007
112 MS ISO 16000-12:2009 INDOOR AIR - PART 12: SAMPLING STRATEGY FOR
POLYCHLORINATED BIPHENYLS (PCBS),
POLYCHLORINATED DIBENZO-P-DIOXINS (PCDDS),
POLYCHLORINATED DIBENZOFURANS (PCDFS) AND
POLYCYCLIC AROMATIC HYDROCARBONS (PAHS) (ISO
16000-12:2008, IDT)
2009 INDOOR
ENVIRONMENTAL
QUALITYISO 16000-12:2008
113 MS ISO 16000-13:2010 INDOOR AIR - PART 13: DETERMINATION OF TOTAL (GAS
AND PARTICLE-PHASE) POLYCHLORINATED DIOXIN-LIKE
BIPHENYLS (PCBS) AND POLYCHLORINATED DIBENZO-P-
DIOXINS/DIBENZOFURANS (PCDDS/PCDFS) - COLLECTION
ON SORBENT-BACKED FILTERS (ISO 16000-13:2008, IDT)
2010 INDOOR
ENVIRONMENTAL
QUALITY
ISO 16000-13:2008
114 MS ISO 16000-14:2010 INDOOR AIR - PART 14: DETERMINATION OF TOTAL (GAS
AND PARTICLE-PHASE) POLYCHLORINATED DIOXIN-LIKE
BIPHENYLS (PCBS) AND POLYCHLORINATED DIBENZO-P-
DIOXINS/DIBENZOFURANS (PCDDS/PCDFS) -
EXTRACTION, CLEAN-UP AND ANALYSIS BY HIGH-
RESOLUTION GAS CHROMATOGRAPHY AND MASS
SPECTROMETRY (ISO 16000-14:2009, IDT)
2010 INDOOR
ENVIRONMENTAL
QUALITY
ISO 16000-14:2009
115 MS ISO 16000-15:2011 INDOOR AIR - PART 15: SAMPLING STRATEGY FOR
NITROGEN DIOXIDE (NO2) (ISO 16000-15:2008, IDT)
2011 INDOOR
ENVIRONMENTAL
QUALITY
ISO 16000-15:2008
116 MS ISO 16000-16 :2011 INDOOR AIR - PART 16: DETECTION AND ENUMERATION
OF MOULDS - SAMPLING BY FILTRATION (ISO 16000-
16:2008, IDT)
2011 INDOOR
ENVIRONMENTAL
QUALITYISO 16000-16:2008
117 MS ISO 16000-17 :2011 INDOOR AIR - PART 17: DETECTION AND ENUMERATION
OF MOULDS - CULTURE-BASED METHOD (ISO 16000-
17:2008, IDT)
2011 INDOOR
ENVIRONMENTAL
QUALITY ISO 16000-17:2008
118 MS IEC 60034-1:2005 ROTATING ELECTRIC MACHINES – PART 1: RATING AND
PERFORMANCE (IEC 60034-1:2004, IDT)
2005 ENERGY EFFICIENCY IEC 60034-1:2004
119 MS IEC 60034-2:2005 ROTATING ELECTRICAL MACHINES – PART 2: METHODS
FOR DETERMINING LOSSES AND EFFICIENCY OF
ROTATING ELECTRICAL MACHINERY FROM TESTS
(EXCLUDING MACHINES FOR TRACTION VEHICLES)(IEC 34-
2:1992, IEC 34-2A:1974, AMD.1:1995 AND AMD. 2:1996, IDT)
2005 ENERGY EFFICIENCY
IEC 34-2:1992, IEC 34-
2A:1974, Amd.1:1995 and
Amd. 2:1996
121 MS IEC 60969:2006 SELF-BALLASTED LAMPS FOR GENERAL LIGHTING
SERVICES – PERFORMANCE REQUIREMENTS (IEC
60969:2001,IDT)
2006 ENERGY EFFICIENCY
IEC 60969:2001
122 MS ISO 5151:2004 NON-DUCTED AIR CONDITIONERS AND HEAT PUMPS :
TESTING AND RATING FOR PERFORMANCE (ISO
5151:1994, IDT)
2004 ENERGY EFFICIENCY
ISO 5151:1994
123 MS IEC 62301:2007 HOUSEHOLD ELECTRICAL APPLIANCES - MEASUREMENT
OF STANDBY POWER INSULATION MATERIAL (IEC
62301:2005, IDT)
2007 ENERGY EFFICIENCY
IEC 62301:2005
126 MS 2024:2006 ELECTRIC RICE COOKER FOR HOUSEHOLD USE- METHOD
OF MEASURING THE PERFORMANCE
2006 ENERGY EFFICIENCY NONE
127 MS ISO 8187:2000 HOUSEHOLD REFRIGERATING APPLIANCES -
REFRIGERATOR-FREEZERS -CHARACTERISTICS AND
TEST METHODS (ISO 8187:1991, IDT)
2000 ENERGY EFFICIENCY
ISO 8187:1991
128 MS 1751:2004 METHODS OF MEASUREMENT OF PERFORMANCE OF
ELECTRIC IRONING MACHINES FOR HOUSEHOLD AND
SIMILAR PURPOSES
2004 ENERGY EFFICIENCY
IEC 60508:1975
129 MS 1752:2004 ELECTRIC TOASTERS FOR HOUSEHOLD AND SIMILAR
PURPOSES - METHODS FOR MEASURING THE
PERFORMANCE (IEC 60442:2003, MOD)
2004 ENERGY EFFICIENCY
IEC 60442:2003
130 MS 1753:2004 ELECTRIC IRONS FOR HOUSEHOLD OR SIMILAR USE -
METHODS FOR MEASURING PERFORMANCE (IEC
60311:2002, MOD)
2004 ENERGY EFFICIENCY
IEC 60311:2002
131 MS 1855:2005 CLOTHES WASHING MACHINES FOR HOUSEHOLD USE -
METHODS FOR MEASURING THE PERFORMANCE
(IEC 60456:2003, MOD)
2005 ENERGY EFFICIENCY
IEC 60456:2003
132 MS IEC 60312:2006 VACUUM CLEANERS FOR HOUSEHOLD USE - METHODS
OF MEASURING THE PERFORMANCE (IEC 60312:2004, IDT)
2006 ENERGY EFFICIENCY
IEC 60312:2004
133 MS IEC 61254:2007 ELECTRIC SHAVERS FOR HOUSEHOLD USE - METHODS
FOR MEASURING THE PERFORMANCE (IEC 61254:1993,
IDT)
2007 ENERGY EFFICIENCY
IEC 61254:1993
134 MS 61855:2008 HOUSEHOLD ELECTRICAL HAIR CARE APPLIANCES -
METHODS OF MEASURING THE PERFORMANCE (IEC
61855:2003, MOD)
2008 ENERGY EFFICIENCY
IEC 61855:2003
135 MS IEC 60379:2011 METHODS FOR MEASURING THE PERFORMANCE OF
ELECTRIC STORAGE WATER-HEATERS FOR HOUSEHOLD
PURPOSES (IEC 60379:1987, IDT)
2011 ENERGY EFFICIENCY
IEC 60379:1987
136 MS IEC 61121:2011 TUMBLE DRYERS FOR HOUSEHOLD USE - METHODS FOR
MEASURING THE PERFORMANCE (IEC 61121:2005,IDT)
2011 ENERGY EFFICIENCY
IEC 61121:2005
137 MS IEC 62552:2011 HOUSEHOLD REFRIGERATING APPLIANCES -
CHARACTERISTICS AND TEST METHODS (IEC 62552:2007,
IDT)
2011 ENERGY EFFICIENCY
IEC 62552:2007
138 MS 1525:2007 CODE OF PRACTICE ON ENERGY EFFICIENCY AND USE
OF RENEWABLE ENERGY FOR NON-RESIDENTIAL
BUILDINGS
2007 ENERGY EFFICIENCY
NONE
139 MS 2095:2008 RADIANT BARRIER BUILDING MATERIALS 2008 ENERGY EFFICIENCY
NONE
140 MS ISO 9346:2004 THERMAL INSULATION- MASS TRANSFER - PHYSICAL
QUANTITIES AND DEFINITIONS (ISO 9346:1987, IDT)
2004 ENERGY EFFICIENCY ISO 9346:1987
141 MS ISO 9288:2003 THERMAL INSULATION - HEAT TRANSFER BY RADIATION -
PHYSICAL QUANTITIES AND DEFINITIONS (ISO 9288:1989,
IDT)
2003 ENERGY EFFICIENCY
ISO 9288:1989
142 MS ISO 9251:2003 THERMAL INSULATION - HEAT TRANSFER CONDITIONS
AND PROPERTIES OF MATERIALS - VOCABULARY (ISO
9251:1987, IDT)
2003 ENERGY EFFICIENCY
ISO 9251:1987
143 MS 1758:2004 THERMAL INSULATION - MATERIALS, PRODUCTS AND
SYSTEMS - VOCABULARY (ISO 9229:1991, MOD)
2004 ENERGY EFFICIENCY
ISO 9229:1991
144 MS ISO 7345:2003 THERMAL INSULATION - PHYSICAL QUANTITIES AND
DEFINITIONS (ISO 7345:1987, IDT)
2003 ENERGY EFFICIENCY
ISO 7345:1987
145 MS ISO 8302:2003 THERMAL INSULATION - DETERMINATION OF STEADY-
STATE THERMAL RESISTANCE AND RELATED
PROPERTIES - GUARDED HOT PLATE APPARATUS (ISO
8302:1991, IDT)
2003 ENERGY EFFICIENCY
ISO 8302:1991
146 MS 1532:2002 THERMAL INSULATION - DETERMINATION OF STEADY-
STATE THERMAL TRANSMISSION PROPERTIES -
CALIBRATED AND GUARDED HOT BOX (ISO 8990:1994;
MOD)
2002 ENERGY EFFICIENCY
ISO 8990:1994
147 MS 1020:2010 THERMAL INSULATION PRODUCTS FOR BUILDINGS -
FACTORY MADE MINERAL WOOL (MW) PRODUCTS -
SPECIFICATION (FIRST REVISION)
2010 ENERGY EFFICIENCY
NONE
148 MS 2325:2010 THERMAL INSULATING PRODUCTS FOR BUILDING
APPLICATIONS - DETERMINATION OF LENGTH AND WIDTH
2010 ENERGY EFFICIENCY
EN 822:1994
149 MS 2339:2010 THERMAL INSULATING PRODUCTS FOR BUILDING
APPLICATIONS - DETERMINATION OF THICKNESS
2010 ENERGY EFFICIENCY EN 823:1994
150 MS 2340:2010 THERMAL INSULATING PRODUCTS FOR BUILDING
APPLICATIONS - DETERMINATION OF FLATNESS
2010 ENERGY EFFICIENCY EN 825:1994
151 MS 2341:2010 THERMAL INSULATING PRODUCTS FOR BUILDING
APPLICATIONS - DETERMINATION OF COMPRESSION
BEHAVIOUR
2010 ENERGY EFFICIENCY
EN 826:1996
152 MS 2342:2010 THERMAL INSULATING PRODUCTS FOR BUILDING
APPLICATIONS - DETERMINATION OF SQUARENESS
2010 ENERGY EFFICIENCY
EN 824:1994
153 MS 2343:2010 THERMAL INSULATING PRODUCTS FOR BUILDING
APPLICATIONS - DETERMINATION OF DIMENSIONAL
STABILITY UNDER SPECIFIED TEMPERATURE AND
HUMIDITY CONDITIONS
2010 ENERGY EFFICIENCY
EN 1604:1996
154 MS 2344:2010 THERMAL INSULATING PRODUCTS FOR BUILDING
APPLICATIONS - DETERMINATION OF TENSILE STRENGTH
PERPENDICULAR TO FACES
2010 ENERGY EFFICIENCY
EN 1607:1996
155 MS 2345:2010 THERMAL INSULATING PRODUCTS FOR BUILDING
APPLICATIONS - DETERMINATION OF TENSILE STRENGTH
PARALLEL TO FACES
2010 ENERGY EFFICIENCY
EN 1608:1996
156 MS 2346:2010 THERMAL INSULATING PRODUCTS FOR BUILDING
APPLICATIONS - DETERMINATION OF COMPRESSIVE
CREEP
2010 ENERGY EFFICIENCY
EN 1606:1996
157 MS 2347:2010 THERMAL INSULATING PRODUCTS FOR BUILDING
APPLICATIONS - DETERMINATION OF SHORT-TERM
WATER ABSORPTION BY PARTIAL IMMERSION
2010 ENERGY EFFICIENCY
EN 1609:1996
158 MS 2348:2010 THERMAL INSULATING PRODUCTS FOR BUILDING
APPLICATIONS - DETERMINATION OF WATER VAPOUR
TRANSMISSION PROPERTIES
2010 ENERGY EFFICIENCY
EN 12086:1997
159 MS 2349:2010 THERMAL INSULATING PRODUCTS FOR BUILDING
APPLICATIONS - DETERMINATION OF BENDING
BEHAVIOUR
2010 ENERGY EFFICIENCY
EN 12089:1997
160 MS 2350:2010 THERMAL INSULATING PRODUCTS FOR BUILDING
APPLICATIONS - DETERMINATION OF LONG TERM WATER
ABSORPTION BY IMMERSION
2010 ENERGY EFFICIENCY
EN 12087:1997
161 MS 2351:2010 THERMAL INSULATING PRODUCTS FOR BUILDING
APPLICATIONS - DETERMINATION OF SHEAR BEHAVIOUR
2010 ENERGY EFFICIENCY
EN 12090:1997
162 MS 2352:2010 THERMAL INSULATING PRODUCTS FOR BUILDING
APPLICATIONS - DETERMINATION OF BEHAVIOUR UNDER
POINT LOAD
2010 ENERGY EFFICIENCY
EN 12430:1998
163 MS 2353:2010 THERMAL INSULATING PRODUCTS - EVALUATION OF
CONFORMITY
2010 ENERGY EFFICIENCY EN 13172:2008
164 MS 2397:2011 SOLAR REFLECTIVE GLASS - SPECIFICATION 2011 ENERGY EFFICIENCY NONE
165 MS 62257-1:2009 RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY
AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION –
PART 1: GENERAL INTRODUCTION TO RURAL
ELECTRIFICATION
2009 OTHER GREEN
FEATURES
IEC/TS 62257-1:2003
166 MS 62257-2:2009 RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY
AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION –
PART 2: FROM REQUIREMENTS TO A RANGE OF
ELECTRIFICATION SYSTEMS
2009 OTHER GREEN
FEATURESIEC/TS 62257-2:2004
167 MS 62257-3:2009 RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY
AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION –
PART 3: PROJECT DEVELOPMENT AND MANAGEMENT
2009 OTHER GREEN
FEATURESIEC/TS 62257-3:2004
168 MS 62257-4:2009 RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY
AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION –
PART 4: SYSTEM SELECTION AND DESIGN
2009 OTHER GREEN
FEATURESIEC/TS 62257-4:2005
169 MS 62257-5:2009 RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY
AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION –
PART 5: PROTECTION AGAINST ELECTRICAL HAZARDS
2009 OTHER GREEN
FEATURESIEC/TS 62257-5:2005
170 MS 62257-6:2009 RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY
AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION –
PART 6: ACCEPTANCE, OPERATION, MAINTENANCE AND
REPLACEMENT
2009 OTHER GREEN
FEATURES
IEC/TS 62257-6:2005
171 MS IEC 62124:2009 PHOTOVOLTAIC (PV) STAND-ALONE SYSTEMS – DESIGN
VERIFICATION (IEC 62124:2004, IDT)
2009 OTHER GREEN
FEATURES IEC 62124:2004
172 MS IEC 61194:2009 CHARACTERISTIC PARAMETERS OF STAND-ALONE
PHOTOVOLTAIC (PV) SYSTEMS (IEC 61194:1992, IDT)
2009 OTHER GREEN
FEATURES IEC 61194:1992
173 MS IEC 60364-7-
712:2007
ELETRICAL INSTALLATIONS OF BUILDINGS- PART 7-712:
REQUIREMENTS FOR SPECIAL INSTALLATION OR
LOCATIONS – SOLAR PHOTOVOLTAIC (PV) POWER
SUPPLY SYSTEMS (IEC 60364-7-712:2002, IDT)
2001 OTHER GREEN
FEATURESIEC 60364-7-712:2002
174 MS IEC 61215:2006 CRYSTALLINE SILICON TERRESTRIAL PHOTOVOLTAIC
(PV) MODULES – DESIGN QUALIFICATION AND TYPE
APPROVAL (IEC 61215:2005, IDT)
2006 OTHER GREEN
FEATURES IEC 61215:2005
175 MS 62257-7:2010 RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY
AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION -
PART 7: GENERATORS
2010 OTHER GREEN
FEATURESIEC/TS 62257-7:2008
176 MS 62257-7-1:2010 RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY
AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION -
PART 7-1: GENERATORS - PHOTOVOLTAIC ARRAYS
2010 OTHER GREEN
FEATURESIEC/TS 62257-7-1:2006
177 MS 62257-7-3:2010 RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY
AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION -
PART 7-3: GENERATOR SET - SELECTION OF GENERATOR
SETS FOR RURAL ELECTRIFICATION SYSTEMS
2010 OTHER GREEN
FEATURES
IEC/TS 62257-7-3:2008
178 MS 62257-8-1:2010 RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY
AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION -
PART 8-1: SELECTION OF BATTERIES AND BATTERY
MANAGEMENT SYSTEMS FOR STAND-ALONE
ELECTRIFICATION SYSTEMS - SPECIFIC CASE OF
AUTOMOTIVE FLOODED LEAD-ACID BATTERIES
AVAILABLE IN DEVELOPING COUNTRIES
2010 OTHER GREEN
FEATURES
IEC/TS 62257-8-1:2007
179 MS 61836:2010 SOLAR PHOTOVOLTAIC ENERGY SYSTEMS - TERMS,
DEFINITIONS AND SYMBOLS
2010 OTHER GREEN
FEATURES IEC/TS 61836:2007
180 MS IEC 61724:2010 PHOTOVOLTAIC SYSTEM PERFORMANCE MONITORING -
GUIDELINES FOR MEASUREMENT, DATA EXCHANGE AND
ANALYSIS (IEC 61724:1998, IDT)
2010 OTHER GREEN
FEATURES
IEC 61724:1998
181 MS IEC 61646:2010 THIN-FILM TERRESTRIAL PHOTOVOLTAIC (PV) MODULES -
DESIGN QUALIFICATION AND TYPE APPROVAL (FIRST
REVISION) (IEC 61646:2008, IDT)
2010 OTHER GREEN
FEATURESIEC 61646:2008
182 MS IEC 61730-1:2010 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION -
PART 1: REQUIREMENTS FOR CONSTRUCTION (IEC 61730-
1:2004, IDT)
2010 OTHER GREEN
FEATURESIEC 61730-1:2004
183 MS IEC 61730-2:2010 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION -
PART 2: REQUIREMENTS FOR TESTING (IEC 61730-2:2004,
IDT)
2010 OTHER GREEN
FEATURES IEC 61730-2:2004
184 MS IEC 61727:2010 PHOTOVOLTAIC (PV) SYSTEMS - CHARACTERISTIC OF
THE UTILITY INTERFACE (IEC 61727:2004, IDT)
2010 OTHER GREEN
FEATURES IEC 61727:2004
185 MS 1837:2010 INSTALLATION OF GRID-CONNECTED PHOTOVOLTAIC
(PV) SYSTEM (FIRST REVISION)
2010 OTHER GREEN
FEATURES NONE
186 MS IEC 62109-1:2011 SAFETY OF POWER CONVERTERS FOR USE IN
PHOTOVOLTAIC POWER SYSTEM – PART 1: GENERAL
REQUIREMENTS (IEC 62109-1:2010, IDT)
2011 OTHER GREEN
FEATURES IEC 62109-1:2010
187 MS 1737:2004 PLASTICS PIPING SYSTEMS – GUIDANCE FOR THE
INSTALLATION INSIDE BUILDINGS OF PRESSURE PIPING
SYSTEMS FOR HOT AND COLD WATER INTENDED FOR
HUMAN CONSUMPTION
2004 WATER EFFICIENCY
NONE
188 MS 795-1:2011 WC FLUSHING CISTERNS - PART 1: SPECIFICATION
(SECOND REVISION)
2011 WATER EFFICIENCYNONE
189 MS 795-2:2011 WC FLUSHING CISTERNS - PART 1: INLET VALVES
(SECOND REVISION)
2011 WATER EFFICIENCYNONE
190 MS 795-3:2011 WC FLUSHING CISTERNS - PART 1: FLUSHING DEVICE
(SECOND REVISION)
2011 WATER EFFICIENCY
NONE
Remarks (if any)
UNDER DEVELOPMENT
UNDER DEVELOPMENT
UNDER DEVELOPMENT
UNDER DEVELOPMENT
UNDER DEVELOPMENT
UNDER DEVELOPMENT
UNDER DEVELOPMENT
UNDER DEVELOPMENT
UNDER DEVELOPMENT
Information on Existing Standards Related to Green Building
