Industrial Mixers - · PDF file02 > seko > water & industry > industrial mixers Introduction Our experience in the liquids treatment (mixing, dispersion, emulsion, etc.) is directly

innovation > technology > future

IndustrialMixers

02 > seko > water & industry > industrial mixers

Introduction

Our experience in the liquids treatment (mixing,dispersion, emulsion, etc.) is directly connectedto more than 40 years of experience in the designand manufacture of metering pumps and dosingsystems for water treatment.

During this period of time Seko has focused itsattention on the needs expressed by customerswho operate in various areas and acquire themost advanced engineering and calculationsystems for finite elements or fluid dynamicsanalysis software and offered its customerssolutions that are in line with or above theirexpectations.

The combination between experience andtechnology that already characterizes Seko inother areas is the guarantee for the quality andthe reliability of its products.

innovation > technology > future > 03

CFD calculation Software

The development of our work is determined by the process engineering whoseevolution allows us to find new technological solutions for our line of mixers.

The quality is planned before being produced and, following this line ofinnovation, we have introduced in our system the CFD* (Computational FluidDynamics) calculation software which allows a detailed study of the mixer’sbehavior in the conditions required by our customers.

The CFD technique allows us to study all the elements of our mixers in anysituation and at the same time to verify the fluid’s behavior while the mixer is inoperation.

In this way, we can simulate the mixer’s behavior in its working conditions, providesolutions regarding the best way of installation, maximize the performance/power consumption relation and drastically reduce the Global Cost of Ownership.

This operation mode allows us to guarantee our customers that the solutionoffered is definitely appropriate to their process.

*CFD (Compuntational Fluid Dynamics) is a software that studies the movement of fluids and its effect on theboundary elements.

With direct motor drivenMaximum power: 7,5 kW

n Rotation speed:750, 1000 and 1500 rpm

With gear motor drivenMaximum power: 7,5 kW

n Rotation speed:from 30 to 400 rpm

Tank connection flange size n DIN2576 DN125 PN10

Tank side-mounted mixerswith a maximum mixingcapacity of 100.000 liters.


Side-mountedmixers forsuspension andagitation.

nWith electric motor and everypossible type of protection(IP-55, EEx dII B T4, etc.).

n Using an inverter, it is possibleto vary the speed of the mixer

n Stainless steel flanges withmechanical seal to ensure thetightness of the tank

n Support in fusion withbearings to support the axialand radial movement of themixer’s shaft

n Shafts and propellers instainless steel or carbon steel

n This series of mixers isavailable with differentmixing elements (marinepropeller, dispersing disk,axial turbine etc.)

With direct motor drivenMaximum power: 3 kW

n Rotation speed:750, 1000 and 1500 rpm

With gear motor drivenMaximum power: 1,5 kW

n Rotation speed:150, 200, 250, 300 and 400 rpm

Tank connection flange size nMod. 6-7: DIN2576 DN50 PN10nMod. 8-9: DIN2576 DN80 PN10

Tank side-mounted mixers

Tank side-mounted mixerswith a maximum mixingcapacity of 30.000 liters.

With direct motor drive nMaximum power: 18,5 kW

n Rotation speed: 750, 1000 and 1500 rpm

With gear motor drive nMaximum power: 11 kW

n Rotation speed: from 30 to 400 rpm

Tank connection flange size n DIN2576 DN125 PN10

Tank side-mounted mixers with a maximum mixingcapacity of 500.000 liters.


Tank side-mounted mixers with clamp locking system

With direct motor drivenMaximum power: 3 kW.

n Rotation speed: 750, 1000, 1500 and3000 rpm.

With gear motor drivenMaximum power: 1,5 kW.

n Rotation speed:from 20 to 500 rpm.

In both cases, using an inverter, it ispossible to vary the speed of the mixers.

Tank side-mountedmixers with clamplocking system with amaximum mixingcapacity of 5.000 liters.

nWith electric or pneumatic motor andevery possible type of protection (IP-55, EEx dII B T4, etc.).

n Support in fusion with bearings tosupport the axial and radialmovement of the mixer’s shaft

nMaximum shaft lenght: 1700 mm.

nWith fixed or removable shaft (withrigid or quick semiautomatic coulping)

n Shafts and propellers in stainless steelor carbon steel

n Also available with Polyester, PVC, PP,ebonite or other covering

n This series of mixers is available withdifferent mixing elements (marinepropeller, dispersing disk, etc)

n The structure of this series allows itsuse also during the tank draining andfilling stages

Maximum shaft length 1200 mm.

Maximum power 0,75 kW.

With direct motor driven Rotation speed: 750, 1000, 1500 and

3000 rpm

With gear motor driven Rotation speed:

from 20 to 500 rpm.


Tank top flange-mountedvertical mixers with amaximum mixing capacityof 2.500 liters.


With direct motor drivenMaximum power: 3 kW.

n Rotation speed: 750, 1000, 1500 and3000 rpm


n Rotation speed: from 20 to 500 rpm.


Tank top flange-mountedvertical mixers with amaximum mixing capacityof 5.000 liters.


Tank top flange-mounted verticalmixers.

nWith electric or pneumaticmotor and every possible typeof protection ( IP-55, EEx dII BT4, etc.).

n Support in fusion withbearings to support the axialand radial movement of themixer’s shaft

nWith fixed or removable shaft

n Shafts and propellers instainless steel or carbon steel

n Also available with Polyester,PVC, PP, ebonite or othercovering

n This series of mixers isavailable with differentmixing elements (marinepropeller, dispersing disk, etc)

n The structure of this seriesallows its use also during thetank draining and fillingstages

Tank top flange-mounted vertical mixers


With direct motor drivenMaximum power: 9,2 kW.

n Rotation speed: 750, 1000, 1500 and 3000 rpm.


n Rotation speed: from 6 to 400 rpm.

In both cases, using an inverter, it is possible to vary the speed of themixers.

Tank connection flange size n DIN2576 DN125 PN10.

Tank top flange-mounted vertical mixers with amaximum mixing capacity of 15.000 liters.


Maximum power 55 kW.

With direct motor driven Rotation speed: 750, 1000 and 1500 rpm.

With gear motor driven Rotation speed: from 4 to 400 rpm.

In both cases, using an inverter, it is possible to vary the speed of themixers.

Tank connection flange size specified by client.

Tank top flange-mounted vertical mixers with amaximum mixing capacity of 100.000 liters.


A Worldwide Group at your serviceseko has been a significant manufacturer of metering pumps and dosing systems for over 40 years. This long activityallowed seko to acquire a vast experience in diversified applications and to confirm its international success in manyindustrial fields through the supply of reliable solutions for the dosing, injection and transfer of liquids

Today seko is an International Group, developing, manufacturing and delivering its products in more than 50 countries,through its 16 subsidiaries and an extended network of distributors, agents and authorized dealers

A Worldwide Group at your service

For more informationwww.seko.com

BRAZILn Seko do Brasil Commercio deSistemas de Dosagem Limitada03170-050 São Paulo (SP) Phone: +55 11 2606 9878Fax: +55 11 2606 [email protected]

CHINAn Seko China Ltd072750 HebeiPhone: +86 312 552 0904Fax: +86 312 552 [email protected]

DENMARKn Seko DenmarkDK-4930 MariboPhone: +45 5475 7545Fax: +45 5474 [email protected]

FRANCEn Seko Lefranc-Bosi S.A.77435 - Marne La Vallee Cedex 2Phone: +33 1 6005 9060Fax: +33 1 6480 [email protected]@seko.frwww.lefrancbosi.com

GERMANYn Seko Deutschland GmbH55252 Mainz - KastelPhone: +49 6134 2858 10Fax: +49 6134 2858 [email protected]

ITALYn Seko SpaVia Salaria Km. 92,20002010 S.Rufina - RietiPhone: +39 0746 605801Fax: +39 0746 [email protected]

ITALYn Seko Spa[Process & Sytems]Via Di Vittorio, 2520068 Peschiera Borromeo - MilanoPhone: +39 02 97372411Fax: +39 02 [email protected]@seko.com

ROMANIAn Seko Sieta S.r.l.400393 Cluj-NapocaPhone: +40 264 415 251Fax: +40 264 415 [email protected]

RUSSIAnOOO Seko129347 - MoscowPhone: +74 99 182 52 36Fax: +74 99 182 52 [email protected]

SINGAPOREn Seko Dosing SystemsAsia Pacific Pte Ltd608838 SingaporePhone: +65 6515 6996Fax: +65 6515 [email protected]

SOUTH AFRICAn Seko Southern Africa(PTY) LtdKyasand - Johannesburg - GautengPhone: +27 11 704 6589Fax: +27 11 704 [email protected]

SPAINn Seko Ibérica Sistemas deDosificación S.A.08960 Sant Just Desvern - BarcelonaPhone: +34 93 4802 570Fax: +34 93 4802 [email protected]

SWEDENn Seko Sweden26123 LandskronaPhone: +46 418 448 482Fax: +46 418 448 [email protected]

TURKEYn Seko Endüstriyel Pompalar veProses Sistemleri San. ve Tic. Ltd.Şti.Kartal Istanbul Phone: +90 216 353 2542Fax: +90 216 353 [email protected]

UNITED ARAB EMIRATESn Seko Middle East FZEP.O. Box 42090Hamriyah Free Zone Phase II, Sharjah Phone: +971 6 5138700Fax: +971 6 [email protected]@seko.ae

UNITED KINGDOMn Seko UKChemical Controls LtdHarlow, Essex - CM19 5JHPhone: +44 1279 423550Fax: +44 1279 [email protected]

USAn Seko Dosing SystemsCorporationTullytown - PA 19007Phone: +1 215 945 01 25Fax: +1 215 945 09 [email protected]

Subject to change without notice. > © Seko SpA > Printed in Italy > BRO.MIX.12A-UK

Documents

Industrial Mixers - · PDF file02 > seko > water & industry > industrial mixers Introduction Our experience in the liquids treatment (mixing, dispersion, emulsion, etc.) is directly