Upload
ngotruc
View
222
Download
0
Embed Size (px)
Citation preview
Terminal Servers Ethernet Fieldbus Gateways Media Converters
Industrial Grade Device Connectivity
Modular design for Ethernet, fiber, GSM/GPRS and modem expansion Turbo Ring/STP/RSTP Ethernet redundancy with network module Secure data transmission 64 KB of off-line buffering per port Supports non-standard baudrates IPv6 supported
Multiport Serial Boards
4-port cellular device server
Quad-band 900/1800, 850/1900 MHz GSM/GPRS Cellular status and signal LED indicators GPRS Class 10 CSD data connection Up to 14,400 bps in Circuit Switched Data mode Short message alerts Real COM mode supported
NPort 6450 with NM-GPRS/GSM ModulesR
Configuration is exceptionally easy Slave mode supports 16 TCP masters and up to 62 serial slaves at the same time Master mode supports 32 TCP slaves at the same time Emergency request tunnels ensure QoS control Serial redirector function provided Embedded Modbus protocol analyzer Redundant dual DC power inputs Built-in Ethernet cascading for easy wiring
PCI Express x1 compliant921.6 Kbps maximum baudrate for super fast data transmission128-byte FIFO and on-chip H/W, S/W flow controlLow profile form factor fits small-sized PCsDrivers provided for Windows (2000, XP/2003/2008/Vista x86/x64), Linux 2.4/2.615 KV ESD protection on the board
Features
Moxa's NPort 6000 secure terminal servers are the first products of their type to support the Turbo Ring protocol for cascade topologies. With Turbo Ring, if any segment of the ring is disconnected, the network will recover in less than 100 milliseconds. The NPort 6000 also supports the complete IPv6 standard. Compared with the original IPv4 standard, this change represents a huge increase in the number of available IP addresses.
The MB3170 and MB3270 are advanced Modbus gateways that provide maximum flexibility for integrating industrial Modbus networks of all types and sizes. They are designed to integrate Modbus TCP, ASCII, and RTU devices in almost any master and slave combination, including serial master to serial slave, or simultaneous serial and Ethernet masters. A special priority control feature allows urgent commands to obtain immediate response.
The ICF-1150 series of industrial serial-to-fiber converters convert the electrical signals used for RS-232, RS-422, and RS-485 transmission to fiber optic signals. To make wiring easier, the ICF-1150 series has a D-sub connector for RS-232 and removable terminal block for RS-422 and RS-485 connections. The ICF-1150's fiber optic port supports ST and SC connectors, which are the most popular connectors in use today.
The CP-102E/EL are smart, 2-port PCI Express boards designed for POS and ATM applications. The boards are a top choice of industrial automation engineers and system integrators, and support many different operating systems, including Windows, Linux, and even Unix. In addition, each of the boards' 2 RS-232 serial ports support a super fast 921.6 Kbps baudrate. The CP-102E/EL provide full modem control signals to ensure compatibility with a wide range of serial peripherals, and the PCI Express "x1" classification allows the boards to be installed in any PCI Express slot.
NPort 6000 Series Secure terminal servers support Turbo Ring for the fastest Ethernet redundancy available MGateTM MB3170/3270 1 and 2-port advanced Serial-to-Ethernet
Modbus Gateways ICF-1150 Series Industrial RS-232/422/485 to fiber optic media converters CP-102E/EL 2-port RS-232 smart
PCI Express boards
PCI Express x1 compliant921.6 Kbps maximum baudrate for super fast data transmission128-byte FIFO and on-chip H/W, S/W flow controlLow profile form factor fits small-sized PCsDrivers provided for Windows (2000, XP/2003/2008/Vista x86/x64), Linux 2.4/2.615 KV ESD protection on the board
Features
2-port RS-422/485 smart PCI Express boards with 2 KV isolation protection
CP-132EL/EL-I
PCI Express x1 compliant921.6 Kbps maximum baudrate for super fast data transmission128-byte FIFO and on-chip H/W, S/W flow controlLow profile form factor fits small-sized PCsDrivers provided for Windows (2000, XP/2003/2008/Vista x86/x64), Linux 2.4/2.615 KV ESD protection on the board
Features
4-port RS-232/422/485 smart PCI Express board with 2 KV isolation protection
CP-114EL/EL-I
Extend serial transmission distance up to: 40 km with single-mode (CP-102UF-S) 5 km with multi-mode (CP-102UF-M)Supports "Ring" and "Point-to-Point" transmission modes921.6 Kbps maximum baudrate for super fast data transmission128-byte FIFO and on-chip H/W, S/W flow controlCompatible with 3.3/5V PCI and PCI-XDrivers provided for Windows (2000, XP/2003/Vista/2008 x86/x64), DOS, Linux 2.4/2.6, QNX 6
Features
2-port Universal PCI serial-over-fiber cardsCP-102UF Series
10/100/1000BaseT(X) and 1000BaseSX/LX/LHX/ZX supportedLink Fault Pass-Through (LFP)Power failure, port break alarm by relay outputRedundant power input-40 to 75 C operating temperature range (T models)Designed for hazardous locations
Features
Industrial Gigabit Ethernet to fiber media converterIMC-101G
Redundant serial-to-Ethernet terminal server series
LCD panel for easy IP address configuration Dual-LAN cards with two independent MAC addresses and IP addresses Redundant COM function available when both LANs are active Dual-host redundancy can be used to add a backup PC to your system Dual AC power inputs Real COM/TTY drivers for Windows and Linux
CN2600 Series
Features
1, 2, and 4-port standard Modbus gateways
Convert between Modbus TCP and Modbus RTU/ASCII1 Ethernet port and 1, 2, or 4 RS-232/422/485 portsSupports 16 simultaneous TCP masters with up to 32 simultaneous requests per masterEasy hardware setup and configuration
MGateTM MB3180/3280/3480
Features
19-slot media converter chassis
19-inch chassis for rack mount use 2U height that leaves more space for fiber-optic wiring Supports hot-swap dual power input with redundancy
TRC-190
Features
Features Features Features Features3-way communicationExtend RS-232/422/485 transmission up to: 40 km with single-mode 5 km with multi-modeRotary switch for configuring the pull high/low resistor3-way galvanic isolation (ICF-1150I only)Wide temperature models available (-40 to 85 C)
R
R
R
CP-102EL
CP-132EL
CP-132EL-I
CP-114EL-I
CP-114EL
CP-102E
Note: The Turbo Ring recovery time for rings made up of NPort 6000 products only is less than 100 ms.
USB Connectivity
w w w. m o x a . c o m
Hi-Speed USB 2.0 for up to 480 Mbps USB transmissionCompatible with USB 1.1 devices15N solid USB upstream connectorAdditional I/O and IRQ not neededDIN-Rail and wall mountableComprehensive diagnostic LEDs
Compatible with USB 2.012 Mbps USB data rateSoftware selectable RS-232, RS-422, 4-wire RS-485, and 2-wire RS-485Drivers provided for Windows (including Vista), WinCE 5.0, and Linux
15 KV ESD protection for all serial ports2 KV optical isolation protection (UPortTM 1150I)Full modem status LEDs for UPortTM 1150I
Hi-Speed USB 2.0 for up to 480 Mbps USB transmission 921.6 Kbps maximum baudrate for super fast data transmission Additional I/O and IRQ not needed Built-in 15 KV ESD protection for all serial ports Drivers provided for Windows (including Vista) and Linux Easy monitoring with LEDs and management software
Hi-Speed USB 2.0 for up to 480 Mbps USB transmission921.6 Kbps maximum baudrate for super fast data transmissionAdditional I/O and IRQ not neededBuilt-in 15 KV ESD protection for all serial portsDrivers provided for Windows (including Vista) and LinuxEasy monitoring with LEDs and management software
Hi-Speed USB 2.0 for up to 480 Mbps USB transmission Compatible with USB 1.1 devices 15 KV ESD Level 4 protection for all USB ports Comprehensive diagnostic LEDs Full 500 mA power per port Locking power supply
Hi-Speed USB 2.0 for up to 480 Mbps USB transmission Compatible with USB 1.1 devices 15 KV ESD Level 4 protection for all USB ports Comprehensive diagnostic LEDs Full 500 mA power per port Locking power supply
The UPortTM 404 and UPortTM 407 are industrial-grade USB 2.0 hubs that expand 1 USB port to 4 and 7 USB ports, respectively. The hubs are designed to provide true USB 2.0 Hi-Speed 480 Mbps data transmission through each port, even for heavy-load applications. The UPortTM 404 and UPortTM 407 have passed USB-IF high-speed testing, which means that the products are fully compliant with the requirements for interoperability. The hubs provide ESD level 4 protection and have a rugged connector design to prevent USB cables from getting unplugged accidentally.
Features
Features Features
UPortTM 404/407 4 and 7-port industrial-grade USB hubs
UPortTM 2044-port entry-level industrial USB hub
Features
Features
UPortTM 22102-port RS-232 USB-to-serial converter
UPortTM 1150/1150IUSB-to-serial converters with 3-in-1 interface and optical isolation
UPortTM 2077-port entry-level industrial USB hub
Features
UPortTM 24104-port RS-232 USB-to-serial converter
Serial Device Servers
8 serial ports supporting RS-232/422/485Compact desktop design10/100M auto-detecting Ethernet portsBuilt-in 15 KV ESD protection for all serial signalsEasy IP address configuration with LCD panelChoice of configuration methods: Web console, Telnet console, and Windows utilityVersatile socket operation modes, including TCP Server, TCP Client, UDP, and Real COM SNMP MIB-II for network managementBuilt-in recorder: Use your own voice as the alert when exceptions occur
NPort S8000 device servers combine serial-to-Ethernet connectivity with a managed Ethernet switch. The products have 5 Ethernet ports and 4 RS-232/422/485 serial ports with 2 KV serial isolation protection. In addition, the NPort S8000 device servers support Turbo Ring (recovery time < 20 ms) technology and RSTP/STP (IEEE 802.1w/D) to increase the reliability and availability of your industrial Ethernet network. The NPort S8000 device servers support a number of reliable and intelligent functions, and are suitable for any harsh industrial environment.
NE-7000 embedded serial device servers are designed for manufacturers who want to add sophisticated network connectivity to their serial devices. With their numerous customer-centric innovations, the NE-7000 embedded serial devices servers can be used to convert any device with a standard serial interface to an Ethernet-enabled device in no time. The NE-7000 embedded serial device servers support 10/100 Mbps Ethernet connections, and provide ready-to-use operation modes, including standard socket modes and Real COM mode.
4 serial ports, 3 RJ45 Ethernet ports, 2 multi-mode fiber ports Turbo Ring/STP/RSTP Ethernet redundancy QoS, IGMP snooping/GMRP, VLAN, LACP, SNMPv1/v2c/v3, RMON supported 2 KV isolation protection Adjustable terminator and pull high/low resistor User-friendly web-based configuration and management
Features
Uses the MiiNe, Moxa's 2nd generation SoCVersatile integration-thumb size fits almost anything!Auto-configuration tools ideal for mass producing your devicesIntegrated configuration interface for your device and the NE-7000Innovative customization functions for private labeling Low power consumption for efficient utilization of system powerLow heat generation for better system stability5-year warranty
Features
Features
NPort S8000 4-port RS-232/422/485 Device Server and Ethernet Switch Combination
R
NE-7000 SeriesEmbedded serial device servers
R
R
R
8-port RS-232/422/485 serial device serversNPort 5600 Desktop SeriesR
1 and 2-port IEEE 802.11a/b/g wireless device serversNPort W2150/2250 PlusR
©2008 Moxa Inc. All rights reserved.The Moxa logo is a registered trademark of Moxa Inc. All other logos appearing in this catalog are the intellectual property of the respective company, product, or organization associated with the logo.
w w w. m o x a . c o m
Moxa [email protected]
Moxa AmericasToll-free: 1-888-MOXA-USA (1-888-669-2872)Tel: +1-714-528-6777Fax: [email protected]
Moxa EuropeTel: +49-89-3 70 03 99-0Fax: +49-89-3 70 03 [email protected]
Moxa Asia-PacificTel: +886-2-8919-1230Fax: [email protected]
Moxa ChinaShanghai OfficeTel: +86-21-5258-9955Fax: [email protected]
Beijing OfficeTel: +86-10-6872-3959/60/61Fax: [email protected]
Shenzhen OfficeTel: +86-755-8368-4084/94Fax: [email protected]
Industrial Grade Device Connectivity
USBConnectivity
Serial Device ServersMultiport Serial Boards
Media Converters
1900010801020
EmbeddedDevice Servers
Moxa was the first company to release IEEE 802.11a/b/g wireless device serversLink any serial device to an IEEE 802.11a/b/g network921.6 Kbps baudrate for RS-232/422/485 transmissionsWeb-based configuration using built-in Ethernet or WLANEnhanced remote configuration with HTTPS, SSHSecure data access with WEP, WPA, WPA2Built-in WLAN site survey toolWireless roaming with user-defined signal strength thresholdOff-line port buffering and serial data logDual power inputs (1 power jack, 1 terminal block)
Features
20082009 Product Highlights
20082009 Product Highlights20082009 Product Highlights