Industrial Cylinder Products - All · PDF fileaerospace climate control electromechanical ﬁltration ﬂuid & gas handling hydraulics pneumatics process control sealing & shielding

aerospaceclimate control electromechanicalfiltrationfluid & gas handlinghydraulicspneumaticsprocess controlsealing & shielding

Industrial Cylinder ProductsPneumatic & Hydraulic Cylinders

In line with our policy of continuing product improvement, specifications and information contained in this catalog are subject to change.

Copyright ©2010, 2011 by Parker Hannifin Corporation. All rights reserved.

PRINTED IN THE U.S.A.

WARNINGFAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.This document and other information from the Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having expertise. It is important that you analyze all aspects of your application, including consequences of any failure and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met.The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice.

Offer of SaleThe items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by provisions stated on a separate page of the document entitled ‘Offer of Sale’.

Catalog SB0106-7 Pneumatic & Hydraulic CylindersIntroduction

www.schraderbellows.com

Schrader BellowsDes Plaines, IL USA

I

Table of Contents

Section B: Hydraulic CylindersHydraulic Cylinder Index 1

PL-2 Series Medium Duty Hydraulic Cylinders (Series Codes PL, PM, PE & PG) 3 - 48

PH-2 Series Heavy Duty Hydraulic Cylinders (Series Codes PH, PJ, PF, PH, PX & PY) 49 - 78

PH-3 Series Heavy Duty Hydraulic Cylinders (Series Codes PH, PJ, PF, PK, PX & PY) 79 - 122

PHX Series Hydraulic and Electrohydraulic Actuators 123 - 126

SHM Series Metric Hydraulic Cylinders 127 - 144

Series CHE/CHD Compact Hydraulic Cylinders 145 - 194

Section C: Application EngineeringApplication Engineering Index 1

Custom Modifications and Innovations 2 - 27

Cylinder Parts Identification and Seal Kit Data 29 - 48

Application Engineering Data 49 - 102

Cylinder Safety Guide 106 - 107

Offer of Sale IBC

Section A: Pneumatic CylindersPneumatic Cylinder Index 1

PA-2 Series Heavy Duty Pneumatic Cylinders (Series Codes PA & PB) 3 - 47

PN Series Non-Lube Cylinders (Series Codes PN & PP) 48 - 50

NC9 Series Pneumatic Cylinders (Series Codes FA, FB, NA & NB) 51 - 88

Rod Lock Pneumatic Cylinders 89 -108

How To Order NC9 Series with Rod Lock (Series Codes FAJ, FBJ, NAJ & NBJ) 109

How To Order PA-2 Series with Rod Lock (Series Codes PAJ, PBJ, PNJ & PPJ) 110 89 - 110

A

B

C

Introduction

Table of Contents Page Section

Manufacturing Locations II

Pneumatic & Hydraulic CylindersIntroduction

Catalog SB0106-7



Manufacturing LocationsRegional Plants

California 221 Helicopter Circle Corona, CA 92880 Tel.: (951) 280-3800 Fax: (951) 280-3808 Fax: (800) 869-9886

Connecticut 80 Shaker Road Enfield, CT 06082 Tel.: (860) 749-2215 Fax: (800) 323-0105

Georgia 1300 Six Flags Road Lithia Springs, GA 30122 Tel.: (770) 819-3400 Fax: (800) 437-3498

Indiana Goodland Plant 715 South Iroquois Street Goodland, IN 47948 Tel.: (219) 297-3182 Fax: (800) 328-8120

Michigan 900 Plymouth Road Plymouth, MI 48170 Tel.: (734) 455-1700 Fax: (734) 455-1007

Oregon 29289 Airport Road Eugene, OR 97402-0079 Tel.: 541-689-9111 Fax: 541-688-6771 Fax: 800-624-7996

II

Manufacturing Locations

Catalog SB0106-7 Pneumatic Cylinders





PA-2

A

NC

9R

od L

ock

Section A – Pneumatic Cylinders

PA-2 Series .......................................................................................Page 3

• Series codes PA, PB, PN & PP

• Heavy duty service with industrial tie rod construction

• Nominal pressure up to 250 PSI

• Standard bore sizes 1" - 14"

• 14 standard mounting styles

NC9 Series Ford Motor Company .................................................Page 51

• Series codes FA, FB, NA & NB

• Medium duty service with industrial tie rod construction

• Nominal pressure up to 250 PSI

• Standard bore sizes 11/2" - 12"

• 10 Ford approved mounting styles

• Additional mounting styles available

NC9 & PA-2 Series with Rod Lock .................................................Page 89

• Series codes PAJ, PBJ, PNJ & PPJ

• Holding forces to resist up to 100 psi input from cap end

• Standard bore sizes 11/2" - 8"

• Manual release is standard

• NEMA 4X rating protects internal components

Section A Overview

1

Pneumatic CylindersPA-2 and NC9 Series Industrial Cylinders are designed to meet your application requirements – with quality and reliability built-in.Bolt-on bronze rod gland cartridges in PA-2 and NC9 Series Cylinders are easily removed for service – without cylinder disassembly. The double-lip wiperseal cleans the rod surface and the rod seal provides positive non-leak sealing and minimum friction.

Floating Cushion Bearings are designed to provide smooth cushion action from start to stop without binding – an adjustable needle valve allows

uniform range of cushion control. Cushions are optional and can be supplied at either or both ends.

Piston Rod Lock option for NC9 & PA-2 Series addresses the need to prevent unwanted actuator movement during machine service. Several industries eliminated the use of stored energy to restrain actuators, which makes our piston Rod Lock an important machine design component.

PA-2 and NC9 Series cylinders are available in a wide selection of bore sizes and mounting styles and are NFPA dimensionally interchangeable with other comparable cylinders.

J.I.T. Delivery PA-2 and NC9 Series cylinders are available

from your local Schrader Bellows distributor and are shipped from our strategically located regional manufacturing plants to save you freight costs and ensure J.I.T. delivery when you want it!

To order PA-2 or NC9 Series Cylinders or for sizing and application assistance contact your local Schrader Bellows distributor. To find a distributor in your area visit the Schrader Bellows web site at www.SchraderBellows.com.

®Registered Trademark, Schrader Bellows

PA-2 Series

Rod Lock for NC9 and PA-2

2

NC9 Series

�www.schraderbellows.com


PA-2

A

NC

9R

od L

ock

ContentsFeatures ...............................................................................4Specifications / Mountings / Ordering Notes ........................5Design Features / Adjustable Floating Cushions.............. 6-7 Mounting Information ...................................................... 8-�7Cylinder Accessories .............................................. �8, 40-4�

Double Rod Models ............................................................�9“Style 6” Piston Rod End .............................................. 44-45How to Order ................................................................ 46-47PN Series Non-Lube..................................................... 48-50

PA-2 Series Heavy-Duty Industrial Tie Rod Pneumatic Cylinders

4 Schrader BellowsDes Plaines, IL USA


Schrader Bellows PA-2 Series Heavy Duty Air CylinderWhen the job calls for reliable, heavy-duty performance, specify PA-2 Series. A 100,000 psi yield strength chrome-plated, case-hardened piston rod. A 125,000 psi yield strength rod-end stud with rolled threads. 100,000 psi yield strength tie rods. With construction like this, the Schrader Bellows PA-2 Series is rated for air service to 250 psi. This is one heavy-duty air cylinder that’s really heavy duty.

They’re truly premium quality cylinders, factory prelubricated standard with a non-lube option for millions of maintenance-free cycles. And to make sure every cylinder is premium quality, we subject each and every one – not just batch samples – to tough inspection and performance tests. See inside for the inside story on all the features that make PA-2 Series the high performance, long lasting choice for all your heavy-duty air applications.

Note: Rod diameters over 21/2" will use a threaded nose gland.

Catalog SB0106-7 Heavy-Duty Pneumatic CylindersPA-2 Series

5www.schraderbellows.com


PA-2

A

NC

9R

od L

ock

Standard Specifications• Heavy Duty Service – ANSI/(NFPA) T�.6.7R2-1996 Specifications and Mounting Dimension Standards • Standard Construction – Square Head – Tie Rod Design• Nominal Pressure – Up to 250 PSI Air Service• Standard Fluid – Filtered Air• Standard Temperature – -10°F. to +165°F.*• Bore Sizes – 1" through 14"• Piston Rod Diameter – 1/2" through 51/2"

• Mounting Styles – 14 standard styles at various application ratings• Strokes – Available in any practical stroke length• Cushions – Optional at either end or both ends of stroke. “Float Check” at cap end. • Rod Ends – Three Standard Choices – Specials to Order

* See Section C, “Operating Fluids and Temperature Range” for higher temperature service.

Rod Dia.1/2, 5/8

5/81

5/8 1

1�/8 5/8 1

1�/8 1�/41

1�/8 1�/4, 21, 1�/8 1�/4, 221/21 - 221/2

�, �1/21�/8 - 21/2

� - 41�/8, 1�/4, 21�/8 - 41/2

5, 51/21�/4 - 51/22 - 51/2

21/2 - 51/2

Bore1

11/2

2

21/2

�1/4

4

5

6

7*

8*

10*12*14*

In line with our policy of continuing product improvement, specifications in this catalog are subject to change.

Mounting Styles and Ordering Notes

Available in all bore and rod combinations in the following mounting styles: MDS2, MDS4, MDX1, MDX�, MDT1, MDT4, and MDF1 (1"-6"). MDF5 (1"-6") and MDE� (8"-14").

Double End Construction

Side Lug

MS2

Head Rectangular Flange

MF1

Cap Rectangular Flange

MF2

Head Square Flange

MF5

Cap Square Flange

MF6

Side Tap

MS4

Tie Rods Extended Both Ends

Trunnion Mounts Cap Fixed Clevis

MP1

Pivot Pin Included

Spherical Bearing

MPU�

Head MT1Cap MT2Intermediate Fixed MT4

Both Ends MX1Cap End MX2Head End MX�

Available in all bore and rod combinations.Available in all bore and rod combinations through 6" bore. 8"-14" bores

supplied as Head Square (ME3) and Cap Square (ME4) mounts.

MX1 MX3 MX2 MS4 MS2 MF6 MF2 MT2 MT1 MT4 MPU3 MP1

TRTRRTRRTTRRRRRRRRTRTRRRRRR

MF1MF5

TTTRTTRRTTRRTRRTRTTRT

N/AN/AN/AN/AN/AN/A

ME3ME4N/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/ARRRRRR

Rod BearingCartridges

R = Removable CartridgeT = Tie Rod Retained Cartridge

*MF5, MF6, MF1, MF2 not available in these bore sizes.

Specifications / Mounting Styles



Adjustable floating cushions Cushions are optional, and can be supplied at head end, cap end, or both ends without change in envelope or mounting dimensions. Cushions are adjustable.The PA-2 Series cylinder design incorporates the longest cushion sleeve and cushion spear that can be provided in the standard envelope without decreasing the rod bearing and piston bearing lengths.

(1) When a cushion is specified at the head end: a. A self-centering sleeve is furnished on the piston rod assembly. b. A needle valve is provided that is flush with the side of the head when wide open. It may be identified by the fact that it is socket-keyed. Needle valves are located on side number 2, in all mounting styles except MT1, MT2 and MT4. These styles have needle valves located on side number �. c. A springless check valve is provided that is also flush with the side of the head and is mounted

adjacent to the needle valve except on certain bores of mounting style MS2 where it is mounted opposite the needle valve. The needle valve may be identified by the fact that it is slotted. d. The check and needle valves are interchangeable in the head.

(2) When a cushion is specified at the cap end: a. A cushion spear is provided on the piston rod assembly. b. A “float check” self-centering bushing is provided which incorporates a large flow check valve for fast “out-stroke” action. c. A socket-keyed needle valve is provided that is flush with the side of the cap when wide open. It is located on side number 2 in all mounting styles except MT1, MT2 and MT4. These styles have needle valves located on side number �.

Piston Rod – Medium carbon steel, induction case-hardened, hard chrome-plated and polished to 10 RMS finish. Piston rods are made from 90,000 to 100,000 psi minimum yield material in 5/8" through 4" diameters. The piston thread equals the catalog style #2 rod end thread for each rod diameter to assure proper piston-to-rod thread strength. Two wrench flats are provided for rod end attachment.

Piston Rod Stud – Furnished on 2" diameter rods and smaller when standard style #2 rod end threads are required. Piston rod studs are also available in 2 times the catalog “A” dimension length. Studs have rolled threads and are made from high strength steel. Anaerobic adhesive is used to permanently lock the stud to the piston rod.

End Seals – Pressure-actuated cylinder body-to- head and cap “O” rings.

Long Bearing Surface – is inboard of the seals, assuring positive lubrication from within the cylinder. An “O” ring is used as a seal between cartridge and head.

Secondary Seal –A Double-Service Wiperseal™ acts as a secondary pressure seal on the extend stroke and cleans the rod on the return stroke.

Bolt-On Rod Cartridge – assures true concentricity and allows removal without tie rod disassembly.

Rod Seal – The piston rod seal offers maximum sealing performance and efficiency with minimum friction. The highly resilient lips are pressure actuated and wear compensating, giving complete reliability through millions of cycles.

Alloy Steel Tie Rod Nuts

Steel Head – Bored and grooved to provide concentricity for mating parts.

Ports – NPTF ports are standard.

Align-A-Groove – A �/16" wide surface machined at each end of the cylinder body. This makes precise mounting quick and easy.

The inside story on why PA-2 Series is your best choice in heavy duty air cylinders.



PA-2

A

NC

9R

od L

ock

CylinderBore

(Inches)

11/2

2

21/2

�1/4

4

5

RodDiameter*(Inches)

5/81

5/81�/85/81�/4121

21/21

�1/2

Cushion Length

CylinderBore

(Inches)

6

7

8

10

12

14

Cap1�/16

1�/16

1�/16

1�/16

1�/16

1�/16

111111

Head*7/87/87/87/87/87/811/81�/16

11/81�/16

11/81�/16

Cushion Length (Inches)

Cushion Length (Inches)

Cap11/411/411/411/411/411/41�/41�/41�/41�/422

Head*1�/811/16

11/16

11/16

11/16

15/16

15/16

1�/16

15/16

1�/16

1�/4111/16

RodDiameter*(Inches)

1�/84

1�/82

1�/851/21�/451/22

51/221/251/2

*Head end cushions for rod diameters not listed have cushion lengths with the limits shown.

For cushion selection and sizing, see Section C of this catalog for additional information.

Prelubricated Wearing SurfacesSchrader Bellows PA-2 Series Air Cylinders are factory prelubricated. Lube-A-Cyl applied to seals, piston, cylinder bore, piston rod and gland surfaces provides lubrication for normal operation.

Lube-A-Cyl has been field and laboratory tested, and is recommended by Schrader Bellows for air cylinders where lubricant should remain in the cylinder and not be expelled into the atmosphere.

Note: Threaded rod glands are supplied on cylinders with rod diameters over 21/2".

Piston with Wear Band Standard 8"-14" Bore

Nut Retained Piston Optional at extra charge

Ports – NPTF ports are standard.

One-Piece Nodular Iron Piston – The wide piston surface contacting cylinder bore reduces bearing loads. Anaerobic adhesive is used to permanently lock and seal the piston to the rod.

High Strength Tie Rods – Made from 100,000 psi minimum yield steel with rolled threads for added strength.

The Cylinder Body – Hard chrome-plated bore, steel tubing finished to a 15 micro inch finish.

Wear bands are furnished standard on cylinder bores 8" and larger to ensure long service life.

Steel Cap – Bored and grooved to provide concentricity for mating parts.

Piston Lipseal – Fully dynamic and self-compensating for variations in pressure, mechanical deflections and wear.

Adjustable Floating Cushions – Cushions are optional and can be supplied at head end, cap end, or both ends without change in envelope or mounting dimensions.

Heavy-Duty Pneumatic CylindersPA-2 Series

Catalog SB0106-7



Side Lug MountStyle MS21" - 1 1/2" - 2" - 2 1/2" - 5" and 6" BoreWith Maximum Oversize Rods

Before determining dimensions: See chart on page 5 for cylinder rod combinations that have removable cartridges.

Side Lug MountStyle MS21 1/2" - 6" Bore

Removable Cartridge

Tie Rod Retained Cartridge

Mounting Information – 1" to 6" Bore

Rod End Dimensions — see table 2Thread Style 4Intermediate Male

Thread Style 3Short Female

Thread Style 2Small Male

A high strength rod end stud is supplied on thread style 2 through 2" diameter rods. Larger sizes or special rod ends are cut threads. Style 2 rod ends are recommended where the workpiece is secured against the rod shoulder. When the workpiece is not shouldered,

style 2 rod ends are recommended through 2" piston rod diameters and style 4 rod ends are recommended on larger diameters. Use style � for applications where female rod end threads are required. If rod end is not specified, style 2 will be supplied.

“Special” Thread Style 0Special thread, extension, rod eye, blank, etc., are also available. To order, specify “Style 0” and give desired dimensions for KK, A, W or WF. If otherwise special, furnish dimensioned sketch.




PA-2

A

NC

9R

od L

ock

EE Bore E NPTF F G J K SB• ST SU SW TS US LB LG P SS

1*11/2

221/2

�1/4

456

11/2n

221/2

��/4

41/2

51/2

61/2

1/4�/8†

�/8†

�/8†

1/21/21/2�/4

�/8

�/8

�/8

�/8

––5/8�/4

11/2

11/2

11/2

11/2

1�/4

1�/4

1�/4

2

1111

11/4

11/4

11/4

11/2

�/16

1/45/16

5/16

�/8�/8

7/16

7/16

2�/4

�1/2

441/2

5�/4

61/2

81/4

91/4

�1/2

�5/8

�5/8

��/4

41/4

41/4

41/2

5

21/8

21/4

21/4

2�/825/825/827/8�1/8

9/�2

7/16

7/16

7/16

9/16

9/16

1�/16

1�/16

27/8

27/8

27/8

��1/4

�1/4

�1/8

�5/8

5/16

1/2

1/2

1/2

�/4�/4

11

�/415/16

15/16

15/16

11/4

11/4

19/16

19/16

5/16

�/8�/8

�/8

1/2

1/2

11/16

11/16

21/8

2�/4

�1/4

��/4

4�/4

51/2

67/8

77/8

Rod Style Style +.000 Dia. 4 2 & 3 -.002Bore MM CC KK A B C D NA V VA VB W WF XS Y ZB

.9991.1241.1241.4991.1241.9991.4991.1242.�741.4991.9991.4992.6241.9992.�741.499�.1241.9992.�742.6241.4994.2491.9992.�742.624�.124�.7491.9994.7492.�742.624�.124�.7494.249

5/8�/4�/411/8�/415/811/8�/42

11/815/811/821/415/82

11/8�

15/82

21/411/8�1/215/82

21/4�

�1/215/842

21/4�

�1/2�1/2

�/8�/8�/81/2�/85/81/2�/8�/4

1/25/81/27/85/8

�/41/21

5/8�/47/81/21

5/8�/47/811

5/8

1�/47/8111

�/81/21/27/81/2

11/87/8

1/211/27/811/87/8

111/16

11/811/27/8

21/16

11/811/2

111/16

7/8

�11/8

11/2111/16

21/16

25/811/8��/811/2

111/16

21/16

25/8

�

5/16-247/16-207/16-20�/4-16

7/16-201-14�/4-16

7/16-2011/4-12�/4-161-14�/4-16

11/2-121-14

11/4-12�/4-16

17/8-121-14

11/4-1211/2-12�/4-1621/2-121-14

11/4-1211/2-1217/8-1221/4-121-14�-12

11/4-1211/2-1217/8-1221/4-1221/2-12

7/16

9/16

9/16

15/16

9/16

15/16

15/16

9/16

111/16

15/16

15/16

15/16

115/16

15/16

111/16

15/16

2�/8

15/16

111/16

115/16

15/16

��/8

15/16

111/16

115/16

2�/827/815/16

�7/8111/16

115/16

2�/827/8��/8

7/16-201/2-201/2-207/8-141/2-2011/4-127/8-141/2-2011/2-127/8-1411/4-127/8-141�/4-1211/4-1211/2-127/8-1421/4-1211/4-1211/2-121�/4-127/8-14�1/4-1211/4-1211/2-121�/4-1221/4-122�/4-1211/4-12��/4-1211/2-121�/4-1221/4-122�/4-12�1/4-12

Thread Rod Extensions and Envelope Dimensions Affected By Rod Size

411/16

411/16

47/851/4

415/16

59/16

55/16

51/16

515/16

57/16

511/16

665/8

61/461/26

67/861/461/265/8

65/16

7�/16

69/16

61�/16

615/16

7�/16

7�/16

71/16

711/16

75/16

77/16

711/16

711/16

711/16

115/16

115/16

115/16

25/16

115/16

29/16

25/16

115/16

21�/16

25/16

29/16

27/16

�1/16

211/16

215/16

27/16

�5/16

211/16

215/16

�1/16

27/16

�5/16

211/16

215/16

�1/16

�5/16

�5/16

21�/16

�7/16

�1/16

��/16

�7/16

�7/16

�7/16

15/16

15/16

1�/81�/41�/82

1�/41�/821/41�/4

217/821/221/82�/8

17/82�/4

21/82�/8

21/221/16

215/16

25/16

29/16

211/16

215/16

215/16

25/16

215/16

29/16

211/16

215/16

215/16

215/16

1/25/85/8

15/8

1�/81

5/81�/41

1�/812

1�/81�/4

121/21�/81�/4

21

�1/21�/81�/4

221/2�

1�/84

1�/4

221/2�

�1/2

* Cushions not available on 1" bore. † On 11/2", 2" and 21/2" bore sizes, the head-end (only) pipe thread is not full depth on cylinders with maximum

oversize rods. Minimum of three full threads available. n 1" bore head is 1�/4" x 11/2". See page 12, Section A. • Upper surface spot-faced for socket head screws.

1/41/4–

1/2

–5/8

––

�/4–

5/8––––––––––

5/8––––

5/8–1/2–––

1/21/2

––

1/4–

1/4–

1/41/4–

1/4–

1/41/41/41/41/41/41/41/41/41/4–

1/41/41/41/4–

1/4–

1/41/41/4––

––

�/16

–�/16

–�/8

�/16

–�/8

–�/8

9/16

1/2

9/16

�/8

11/16

1/2

9/16

9/16

�/8

–1/2

9/16

9/16

11/16

–7/16

–9/16

9/16

11/16

––

5/85/8–1–

11/4––

11/2–

11/4––––––––––

15/8––––

15/8

–11/2–––

11/2

11/2

––1–1–

1�/81–

1�/8

–1�/8

215/8

17/8

1�/8

21/415/817/8

21�/8

–15/8

17/8

221/4–

15/8–

17/82

21/4––

1*

11/2

2

21/2

�1/4

4

5

6

�7/8

44

41/8

47/8

47/8

51/8

5�/4

Add Stroke

Add Stroke

Mounting Information – 1" to 6" Bore Sizes

Table 1—Envelope and Mounting Dimensions

Table 2—Rod Dimensions and Envelope Dimensions Affected by Rod Size


Catalog SB0106-7



Side Tap Mount Style MS41" - 1 1/2" - 2" - 2 1/2" - 5" and 6" BoreWith Maximum Oversize Rods


Side Tap MountStyle MS41 1/2" - 6" Bore

Removable Cartridge












PA-2

A

NC

9R

od L

ock

�7/8

44

41/8

47/8

47/8

51/8

5�/4

EE Bore E NPTF F G J K NT TN LB LG P SN

1*11/22

21/2

�1/4

456

n

221/2

��/4

41/2

51/2

61/2

1/4�/8†

�/8†

�/8†

1/21/21/2�/4

�/8�/8

�/8

�/8

5/85/85/8�/4

11/2

11/2

11/2

11/2

1�/4

1�/4

1�/4

2

1111

11/4

11/4

11/4

11/2

�/16

1/45/16

5/16

�/8�/8

7/16

7/16

* Cushions not available on 1" bore.† On 11/2", 2" and 21/2" bore sizes, the head-end (only) pipe thread is not full depth on cylinders

with maximum oversize rods. Minimum of three full threads available.n 1" bore head is 1�/4" x 11/2". See page 12, Section A.



Rod Style Style +.000 Dia. 4 2 & 3 -.002Bore MM CC KK A B C D NA V VA VB W WF XT Y ND ZB

.9991.1241.1241.4991.1241.9991.4991.1242.�741.4991.9991.4992.6241.9992.�741.499�.1241.9992.�742.6241.4994.2491.9992.�742.624�.124�.7491.9994.7492.�742.624�.124�.7494.249

5/8�/4

�/4

11/8�/4

15/811/8�/4

211/815/811/821/415/82

11/8�

15/82

21/411/8�1/215/82

21/4�

�1/215/842

21/4�

�1/2�1/2

�/8�/8

�/8

1/2�/85/8

1/2�/8�/4

1/25/81/27/85/8

�/41/21

5/8�/47/81/21

5/8�/47/811

5/8

1�/47/8111

�/81/21/27/81/2

11/87/8

1/211/27/811/87/8

111/16

11/811/27/8

21/16

11/811/2

111/16

7/8

�11/811/2

111/16

21/16

25/811/8��/811/2

111/16

21/16

25/8

�

5/16-247/16-207/16-20�/4-16

7/16-201-14�/4-16

7/16-2011/4-12�/4-161-14�/4-16

11/2-121-14

11/4-12�/4-16

17/8-121-14

11/4-1211/2-12�/4-16

21/2-121-14

11/4-1211/2-1217/8-1221/4-121-14�-12

11/4-1211/2-1217/8-1221/4-1221/2-12

7/16

9/16

9/16

15/16

9/16

15/16

15/16

9/16

111/16

15/16

15/16

15/16

115/16

15/16

111/16

15/16

2�/8

15/16

111/16

115/16

15/16

��/8

15/16

111/16

115/16

2�/827/815/16

�7/8111/16

115/16

2�/827/8��/8

7/16-201/2-201/2-207/8-141/2-2011/4-127/8-141/2-2011/2-127/8-1411/4-127/8-141�/4-1211/4-1211/2-127/8-1421/4-1211/4-1211/2-121�/4-127/8-14�1/4-1211/4-1211/2-121�/4-1221/4-122�/4-1211/4-12��/4-1211/2-121�/4-1221/4-122�/4-12�1/4-12


115/16

115/16

115/16

25/16

11�/16

29/16

25/16

115/16

21�/16

25/16

29/16

27/16

�1/16

211/16

215/16

27/16

�5/16

211/16

215/16

�1/16

27/16

�5/16

211/16

215/16

�1/16

�5/16

�5/16

21�/16

�7/16

�1/16

��/16

�7/16

�7/16

�7/16

1/2

5/8

5/8

15/8

1�/8

15/8

1�/4

11�/8

12

1�/8

1�/4

121/2

1�/8

1�/4

21

�1/2

1�/8

1�/4

221/2

�1�/8

41�/4

221/2

��1/2

1/41/4–

1/2

–5/8

––

�/4

–5/8––––––––––

5/8––––

5/8–1/2–––

1/21/2

––

1/4–

1/4–

1/4

1/4

–1/4

–1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

–1/4

1/4

1/4

1/4

–1/4

–1/4

1/4

1/4

––

––

�/16

–�/16

–�/8�/16

–�/8–

�/89/16

1/29/16

�/811/16

1/29/16

9/16

�/8–

1/29/16

9/16

11/16

–7/16

–9/16

9/16

11/16

––

5/85/8–1–

11/4––

11/2–

11/4––––––––––

15/8––––

15/8–

11/2–––

11/211/2

––1–1–

1�/81–

1�/8

–1�/8

215/8

17/8

1�/8

21/415/817/8

21�/8

–15/8

17/8

221/4–

15/8–

17/8

221/4––

1*

11/2

2

21/2

�1/4

4

5

6

115/16

115/16

115/16

25/16

115/16

29/16

25/16

115/16

21�/16

25/16

29/16

27/16

�1/16

211/16

215/16

27/16

�5/16

211/16

215/16

�1/16

27/16

�5/16

211/16

215/16

�1/16

�5/16

�5/16

21�/16

�7/16

�1/16

��/16

�7/16

�7/16

�7/16

1/41/4�/8�/8

11/�2

11/�2

11/�2

7/16

7/16

7/16

7/16

1/21/21/21/25/8

5/8

5/8

5/8

5/8

�/4�/4�/4�/4�/4�/4�/47/87/87/87/87/87/87/8

411/16

411/16

47/851/4

415/16

59/16

55/16

51/16

515/16

57/16

511/16

665/8

61/461/26

67/861/461/265/8

65/16

7�/16

69/16

61�/16

615/16

7�/16

7�/16

71/16

711/16

75/16

77/16

711/16

711/16

711/16

–�5/8

�5/8

��/4

41/4

41/4

41/2

5

9/16

5/87/8

11/4

11/2

21/16

211/16

�1/4

21/8

21/4

21/4

2�/825/825/827/8�1/8

10-241/4-205/16-18�/8-161/2-1�1/2-1�5/8-11�/4-10

Add Stroke

Add Stroke

21/8

21/4

21/4

2�/825/825/827/8�1/8



Catalog SB0106-7



Head Rectangular Flange Mount Style MF11" - 6" Bore

1" Bore Cylinder Only

1/4

E

1" Bore Cylinder OnlyHead End

1/4E

24E R

E

TF

3

UF

1

FB4 HOLES

G

WF

F J

P + STROKELB + STROKE

ZB + STROKE

W

EE

Y

K

MM

CV

A

D ACROSSFLATS

SMALLMALE

KK

NA

B







Removable Cartridge



1�www.schraderbellows.com


PA-2

A

NC

9R

od L

ock

EE Bore E NPTF F FB G J K R TF UF LB P

1*11/2

221/2

�1/4

456


Rod Style Style +.000 Dia. 4 2 & 3 -.002Bore MM CC KK A B C D NA V W WF Y ZB

.9991.1241.1241.4991.1241.9991.4991.1242.�741.4991.9991.4992.6241.9992.�741.499�.1241.9992.�742.6241.4994.2491.9992.�742.624�.124�.7491.9994.7492.�742.624�.124�.7494.249

5/8�/4

�/4

11/8�/4

15/811/8�/4

211/815/811/821/415/82

11/8�

15/82

21/411/8�1/215/82

21/4�

�1/215/842

21/4�

�1/2�1/2

�/8�/8�/81/2�/85/81/2�/8�/4

1/25/81/27/85/8

�/41/21

5/8�/47/81/21

5/8�/47/811

5/8

1�/47/8111

�/81/21/27/81/2

11/87/8

1/211/27/811/87/8

111/16

11/811/27/8

21/16

11/811/2

111/16

7/8

�11/811/2

111/16

21/16

25/811/8��/811/2

111/16

21/16

25/8

�

5/16-247/16-207/16-20�/4-16

7/16-201-14�/4-16

7/16-2011/4-12

�/4-161-14�/4-16

11/2-121-14

11/4-12�/4-16

17/8-121-14

11/4-1211/2-12�/4-16

21/2-121-14

11/4-1211/2-1217/8-1221/4-121-14�-12

11/4-1211/2-1217/8-1221/4-1221/2-12

7/16

9/16

9/16

15/16

9/16

15/16

15/16

9/16

111/16

15/16

15/16

15/16

115/16

15/16

111/16

15/16

2�/8

15/16

111/16

115/16

15/16

��/8

15/16

111/16

115/16

2�/827/815/16

�7/8111/16

115/16

2�/827/8��/8

7/16-201/2-201/2-207/8-141/2-2011/4-127/8-141/2-2011/2-127/8-1411/4-127/8-141�/4-1211/4-1211/2-127/8-1421/4-1211/4-1211/2-121�/4-127/8-14�1/4-1211/4-1211/2-121�/4-1221/4-122�/4-1211/4-12��/4-1211/2-121�/4-1221/4-122�/4-12�1/4-12


1/25/85/81

5/8

1�/81

5/81�/41

1�/812

1�/81�/4

121/21�/81�/4

21

�1/21�/81�/4

221/2�

1�/84

1�/4

221/2�

�1/2

1/41/41/41/2

1/45/8

1/21/4�/41/2

5/81/41/2�/8

1/21/4

5/8�/81/21/21/45/8�/8

1/21/2

5/85/8

1/4

1/2�/8

�/8

1/21/21/2

1*

11/2

2

21/2

�1/4

4

5

6


* Cushions not available on 1" bore. † On 11/2", 2" and 21/2" bore sizes, the head-end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of three full threads available.n1" bore head is 1�/4" x 11/2". See page 12, Section A.

5/85/85/81

5/811/41

5/811/2

111/4�/4

1�/8

111/4�/4

15/81

11/41�/8

�/415/81

11/41�/8

15/815/8

7/811/211/8

11/411/211/211/2

115/16

115/16

115/16

25/16

115/16

29/16

25/16

115/16

21�/16

25/16

29/16

27/16

�1/16

211/16

215/16

27/16

�5/16

211/16

215/16

�1/16

27/16

�5/16

211/16

215/16

�1/16

�5/16

�5/16

21�/16

�7/16

�1/16

��/16

�7/16

�7/16

�7/16

411/16

411/16

47/851/4

415/16

59/16

55/16

51/16

515/16

57/16

511/16

665/8

61/461/26

67/861/461/265/8

65/16

7�/16

69/16

61�/16

615/16

7�/16

7�/16

71/16

711/16

75/16

77/16

711/16

711/16

711/16

n

221/2

��/4

41/2

51/2

61/2

1/4�/8†

�/8†

�/8†

1/2

1/2

1/2

�/4

�/8

�/8

�/8

�/8

5/85/85/8�/4

1111

11/4

11/4

11/4

11/2

�/16

1/45/16

5/16

�/8�/87/16

7/16

11/2

11/2

11/2

11/2

1�/4

1�/4

1�/4

2

1/45/16

�/8�/87/16

7/16

9/16

9/16

�7/8

44

41/8

47/847/851/85�/4

1.081.4�1.842.192.76�.�24.104.88

21/8

21/4

21/4

2�/825/825/827/8�1/8

22�/4

��/8

�7/8411/16

57/16

65/8

75/8

21/2

��/8

41/8

45/8

51/2

61/4

75/8

85/8

Add Stroke

Add Stroke

111

1�/81

15/8

1�/81

17/81�/815/8

1�/82

15/8

17/81�/821/415/8

17/82

1�/821/415/8

17/82

21/421/415/8

21/417/82

21/421/421/4



Catalog SB0106-7



2 4R E

E SQ. FB4 HOLES

TF

3

UF

1

GK J

P + STROKELG + STROKE

ZF + STROKE

WF

EE

Y

F

MM

CA

B

NA

VA

XF + STROKE

2 4R E

E SQ. FB4 HOLES

TF

3

UF

1

GFK

J


ZF + STROKE

W

EE

Y

F

MM

CV

A

B

NA

XF + STROKE

Cap Rectangular Flange MountStyle MF21" - 1 1/2" - 2" - 2 1/2" - 5" and 6" BoreWith Maximum Oversize Rods

Cap Rectangular Flange MountStyle MF21 1/2" - 6" Bore


Removable Cartridge






style 2 rod ends are recommended through 2” piston rod diameters and style 4 rod ends are recommended on larger diameters. Use style � for applications where female rod end threads are required. If rod end is not specified, style 2 will be supplied.






PA-2

A

NC

9R

od L

ock

Rod Style Style +.000 Dia. 4 2 & 3 -.002Bore MM CC KK A B C D NA V VA VB W WF Y XF ZF

22�/4

��/8

�7/8411/16

57/16

65/8

75/8

EE Bore E NPTF F FB G J K R TF UF LB LG P

1*11/2

221/2

�1/4

456


* Cushion not available on 1" bore. † On 11/2", 2" and 21/2" bore sizes, the head-end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of three full threads available.n1" bore head is 1�/4" x 11/2". See page 12, Section A.

n

221/2

��/4

41/2

51/2

61/2

1/4�/8†

�/8†

�/8†

1/2

1/2

1/2

�/4

�/8

�/8

�/8

�/8

5/85/85/8�/4

1111

11/4

11/4

11/4

11/2

�/16

1/45/16

5/16

�/8�/8

7/16

7/16

11/2

11/2

11/2

11/2

1�/4

1�/4

1�/4

2

1/45/16

�/8�/8

7/16

7/16

9/16

9/16

�7/8

44

41/8

––

51/8

5�/4


.9991.1241.1241.4991.1241.9991.4991.1242.�741.4991.9991.4992.6241.9992.�741.499�.1241.9992.�742.6241.4994.2491.9992.�742.624�.124�.7491.9994.7492.�742.624�.124�.7494.249

5/8�/4�/411/8�/415/811/8�/42

11/815/811/821/415/82

11/8�

15/82

21/411/8�1/215/82

21/4�

�1/215/842

21/4�

�1/2�1/2

�/8�/8�/81/2�/85/81/2�/8�/41/25/81/27/85/8

�/41/21

5/8�/47/81/21

5/8�/47/811

5/8

1�/47/8111

�/81/21/27/81/2

11/87/8

1/211/27/811/87/8

111/16

11/811/27/8

21/16

11/811/2

111/16

7/8

�11/811/2

111/16

21/16

25/811/8��/811/2

111/16

21/16

25/8

�

5/16-247/16-207/16-20�/4-16

7/16-201-14�/4-16

7/16-2011/4-12�/4-161-14�/4-16

11/2-121-14

11/4-12�/4-16

17/8-121-14

11/4-1211/2-12�/4-16

21/2-121-14

11/4-1211/2-1217/8-1221/4-121-14�-12

11/4-1211/2-1217/8-1221/4-1221/2-12

7/16

9/16

9/16

15/16

9/16

15/16

15/16

9/16

111/16

15/16

15/16

15/16

115/16

15/16

111/16

15/16

2�/815/16

111/16

115/16

15/16

��/815/16

111/16

115/16

2�/827/815/16

�7/8111/16

115/16

2�/827/8��/8

7/16-201/2-201/2-207/8-141/2-2011/4-127/8-141/2-2011/2-127/8-1411/4-127/8-141�/4-1211/4-1211/2-127/8-1421/4-1211/4-1211/2-121�/4-127/8-14�1/4-1211/4-1211/2-121�/4-1221/4-122�/4-1211/4-12��/4-1211/2-121�/4-1221/4-122�/4-12�1/4-12


1/25/85/81

5/81�/81

5/81�/41

1�/812

1�/81�/41

21/21�/81�/421

�1/21�/81�/4

221/2�

1�/84

1�/42

21/2�

�1/2

1/41/4–

1/2

–5/8––

�/4–

5/8––––––––––

5/8––––

5/8–1/2–––

1/21/2

––1/4–

1/4–

1/41/4–

1/4–

1/41/41/41/41/41/41/41/41/41/4–

1/41/41/41/4–

1/4–

1/41/41/4––

––

�/16

–�/16

–�/8

�/16

–�/8

–�/8

9/16

1/2

9/16

�/8

11/16

1/2

9/16

9/16

�/8

–1/2

9/16

9/16

11/16

–7/16

–9/16

9/16

11/16

––

5/85/8–1–

11/4––

11/2–

11/4––––––––––

15/8––––

15/8

–11/2–––

11/2

11/2

––1–1–

1�/81–

1�/8–

1�/82

15/817/81�/821/415/817/82

1�/8

–15/8

17/8

221/4–

15/8–

17/8

221/4––

1.081.4�1.842.192.76�.�24.104.88

21/8

21/4

21/4

2�/825/825/827/8�1/8

21/2

��/8

41/8

45/8

51/2

61/4

75/8

85/8

–�5/8

�5/8

��/4

41/4

41/4

41/2

5

115/16

115/16

115/16

25/16

115/16

29/16

25/16

115/16

21�/16

25/16

29/16

27/16

�1/16

211/16

215/16

27/16

�5/16

211/16

215/16

�1/16

27/16

�5/16

211/16

215/16

�1/16

�5/16

�5/16

21�/16

�7/16

�1/16

��/16

�7/16

�7/16

�7/16

47/847/85

5�/85

55/85�/851/86

51/25�/4

61/467/861/26�/4

61/471/861/26�/467/861/27�/8

6�/47

71/87�/8

7�/8

7�/8

875/8

7�/4

888

Add Stroke

41/241/2

45/8

545/8

51/4

54�/4

55/8

51/85�/8

55/8

61/4

57/861/8

55/8

61/257/861/8

61/4

57/86�/4

61/8

6�/8

61/26�/4

6�/4

65/8

71/467/8

771/4

71/4

71/4

Add Stroke

1

11/2

2

21/2

�1/4

4

5

6



Catalog SB0106-7



2 4R TF E

RTF

3

UF

UFE1

FB8 HOLES

GF

K

J


ZF + STROKE

W

EE

Y

F

MM

C

VA

B

NA

24E UF R

RTF

3

TF

UFE1

FB8 HOLES

GF J


ZB + STROKE

W

EE

Y

K

MM

C

VA

KK

B

D ACROSSFLATS

NA

Head Square Flange MountStyle MF51" - 6" Bore

Cap Square Flange MountStyle MF61 1/2" - 6" Bore


Cap Square Flange MountStyle MF61" - 1 1/2" - 2" - 2 1/2" - 5" and 6" BoreWith Maximum Oversize Rods

Removable Cartridge

Removable Cartridge


2 4R TF E

R

TF

3

UF

UFE1

FB8 HOLES

GKJ


ZF + STROKE

WF

EE

Y

F

MM

CVA

A

B

NA











PA-2

A

NC

9R

od L

ock

EE Bore E NPTF F FB G J K R TF UF LB LG P


.9991.1241.1241.4991.1241.9991.4991.1242.�741.4991.9991.4992.6241.9992.�741.499�.1241.9992.�742.6241.4994.2491.9992.�742.624�.124�.7491.9994.7492.�742.624�.124�.7494.249

5/8�/4�/411/8�/415/811/8�/4

211/815/811/821/415/82

11/8�

15/82

21/411/8�1/215/82

21/4�

�1/215/842

21/4�

�1/2�1/2

�/8�/8�/81/2�/85/81/2�/8�/41/25/81/27/85/8

�/41/21

5/8�/47/81/21

5/8�/47/811

5/81

�/47/8111

�/81/21/27/81/2

11/87/8

1/211/27/811/87/8

111/16

11/811/27/8

21/16

11/811/2

111/16

7/8

�11/811/2

111/16

21/16

25/811/8��/811/2

111/16

21/16

25/8�

5/16-247/16-207/16-20�/4-16

7/16-201-14�/4-16

7/16-2011/4-12�/4-161-14�/4-16

11/2-121-14

11/4-12�/4-16

17/8-121-14

11/4-1211/2-12�/4-16

21/2-121-14

11/4-1211/2-1217/8-1221/4-121-14�-12

11/4-1211/2-1217/8-1221/4-1221/2-12

7/16

9/16

9/16

15/16

9/16

15/16

15/16

9/16

111/16

15/16

15/16

15/16

115/16

15/16

111/16

15/16

2�/8

15/16

111/16

115/16

15/16

��/8

15/16

111/16

115/16

2�/827/815/16

�7/8111/16

115/16

2�/827/8��/8

7/16-201/2-201/2-207/8-141/2-2011/4-127/8-141/2-2011/2-127/8-1411/4-127/8-141�/4-1211/4-1211/2-127/8-1421/4-1211/4-1211/2-121�/4-127/8-14�1/4-1211/4-1211/2-121�/4-1221/4-122�/4-1211/4-12��/4-1211/2-121�/4-1221/4-122�/4-12�1/4-12


1/25/85/81

5/81�/81

5/81�/41

1�/812

1�/81�/41

21/21�/81�/4

21

�1/21�/81�/4

221/2�

1�/84

1�/4

221/2�

�1/2

1/41/4

1/4**1/2

1/4**5/8

1/2**1/4**

�/4

1/2**5/8

1/4**1/2**�/8**1/2**1/4**5/8**�/8**1/2**1/2**1/4**

5/8

�/8**1/2**1/2**5/8**

5/8

1/4�/8

�/8**1/2**1/2**

1/2

1/2

––1/4–1/4–1/41/4–1/4–1/41/41/41/41/41/41/41/41/41/4–1/41/41/41/4–1/4–1/41/41/4––

––

�/16

–�/16

–�/8

�/16

–�/8

–�/8

9/16

1/2

9/16

�/8

11/16

1/2

9/16

9/16

�/8

–1/2

9/16

9/16

11/16

–7/16

–9/16

9/16

11/16

––

5/85/81/41

5/811/41

5/811/2

111/4�/4

1�/8

111/4�/4

15/81

11/41�/8

�/415/81

11/41�/8

15/815/8

7/811/211/811/411/211/211/2

––1–1–

1�/81–

1�/8–

1�/82

15/817/81�/821/415/817/82

1�/8–

15/8

17/8

221/4–

15/8–

17/82

21/4––

115/16

115/16

115/16

25/16

115/16

29/16

25/16

115/16

21�/16

25/16

29/16

27/16

�1/16

211/16

215/16

27/16

�5/16

211/16

215/16

�1/16

27/16

�5/16

211/16

215/16

�1/16

�5/16

�5/16

21�/16

�7/16

�1/16

��/16

�7/16

�7/16

�7/16

411/16

411/16

47/851/4

415/16

59/16

55/16

51/16

515/16

57/16

511/16

665/8

61/461/26

67/861/461/265/8

65/16

7�/16

69/16

61�/16

615/16

7�/16

7�/16

71/16

711/16

75/16

77/16

711/16

711/16

711/16

47/847/85

5�/85

55/85�/851/86

51/25�/4

61/467/861/26�/4

61/471/861/26�/4

67/861/27�/8

6�/4

771/87�/8

7�/8

7�/8

875/8

7�/4888

22�/4

��/8

�7/8411/16

57/16

65/8

75/8

1*11/2

221/2

�1/4

456

n

221/2

��/4

41/2

51/2

61/2

1/4�/8†

�/8†

�/8†

1/2

1/2

1/2

�/4

�/8�/8�/8�/85/85/85/8�/4

1111

11/4

11/4

11/4

11/2

�/16

1/45/16

5/16

�/8�/8

7/16

7/16

11/2

11/2

11/2

11/2

1�/4

1�/4

1�/4

2

1/45/16

�/8�/8

7/16

7/16

9/16

9/16

�7/8

44

41/8

47/847/851/85�/4

1.081.4�1.842.192.76�.�24.104.88

21/8

21/4

21/4

2�/825/825/827/8�1/8

21/2

��/8

41/8

45/851/2

61/4

75/8

85/8

–�5/8

�5/8

��/4

41/4

41/4

41/2

5 * Cushion not available on 1" bore. † On 11/2", 2" and 21/2" bore sizes, the head-end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of three full threads available.n1" bore head is 1�/4" x 11/2". See page 12, Section A.

Table 2—Rod End Dimensions and Envelope Dimensions Affected By Rod Size

Rod Style Style +.000 Dia. 4 2 & 3 -.002Bore MM CC KK A B C D NA V VA VB W WF Y ZB ZF

** For all MF5 mounts and MF6 mounts with maximum oversized rods.

Add Stroke

Add Stroke

1

11/2

2

21/2

�1/4

4

5

6



Catalog SB0106-7



Tie Rods can be extended: Both Ends — Model MX1; Cap End — Model MX2; Head End — Model MX�.


Tie Rods Extended MountStyle MX11" - 1 1/2" - 2" - 2 1/2" - 5" and 6" BoreWith Maximum Oversize Rods

Tie Rods Extended MountStyle MX11 1/2" - 6" Bore

24E R

R

3

E

AA

1

GBB FJ


ZB + STROKE

W

EE

Y

BB

KK

DD

CVA

B

NA

MM

24E

BF

R

R

3

E

AA

1

GBBJ


ZB + STROKE

WF

EE

Y

BB

KK

DD

MM

CVA

A

B

NA









Removable Cartridge




PA-2

A

NC

9R

od L

ock

Rod Style Style +.000 Dia. 4 2 & 3 -.002Bore MM CC KK A B BF C D NA V VA VB W WF Y ZB



.9991.1241.1241.4991.1241.9991.4991.1242.�741.4991.9991.4992.6241.9992.�741.499�.1241.9992.�742.6241.4994.2491.9992.�742.624�.124�.7491.9994.7492.�742.624�.124�.7494.249

5/8�/4�/411/8�/415/811/8�/42

11/815/811/821/415/82

11/8�

15/82

21/411/8�1/215/82

21/4�

�1/215/842

21/4�

�1/2�1/2

5/16-247/16-207/16-20�/4-16

7/16-201-14�/4-16

7/16-2011/4-12�/4-161-14�/4-16

11/2-121-14

11/4-12�/4-16

17/8-121-14

11/4-1211/2-12�/4-16

21/2-121-14

11/4-1211/2-1217/8-1221/4-121-14�-12

11/4-1211/2-1217/8-1221/4-1221/2-12

7/16-201/2-201/2-207/8-141/2-2011/4-127/8-141/2-2011/2-127/8-1411/4-127/8-141�/4-1211/4-1211/2-127/8-1421/4-1211/4-1211/2-121�/4-127/8-14�1/4-1211/4-1211/2-121�/4-1221/4-122�/4-1211/4-12��/4-1211/2-121�/4-1221/4-122�/4-12�1/4-12


1/25/85/81

5/81�/81

5/81�/41

1�/812

1�/81�/41

21/21�/81�/421

�1/21�/81�/42

21/2�

1�/84

1�/42

21/2�

�1/2

EE Bore AA BB DD E NPTF F G J K R LG P

1*11/2

221/2

�1/4

456

�/16

1/45/16

5/16

�/8�/8

7/16

7/16

1.081.4�1.842.192.76�.�24.104.88

21/8

21/4

21/4

2�/825/825/827/8�1/8

�1/2

�5/8

�5/8

��/4

41/4

41/4

41/2

5

1111

11/4

11/4

11/4

11/2

11/2

11/2

11/2

11/2

1�/4

1�/4

1�/4

2

�/8�/8�/8�/8––

5/8�/4

1/4�/8†

�/8†

�/8†

1/2

1/2

1/2

�/4

n

221/2

��/4

41/2

51/2

61/2

1.5�2.022.6�.1�.94.75.86.9

�/4

111/8

11/8

1�/8

1�/8

11�/16

11�/16

10-241/4-285/16-245/16-24�/8-24�/8-241/2-201/2-20

�/8�/8�/81/2�/85/81/2�/8�/41/25/81/27/85/8

�/41/21

5/8�/47/81/21

5/8�/47/811

5/8

1�/47/8111

�/81/21/27/81/2

11/87/8

1/211/27/811/87/8

111/16

11/811/27/8

21/16

11/811/2

111/16

7/8

�11/811/2

111/16

21/16

25/811/8��/811/2

111/16

21/16

25/8

�

7/16

9/16

9/16

15/16

9/16

15/16

15/16

9/16

111/16

15/16

15/16

15/16

115/16

15/16

111/16

15/16

2�/8

15/16

111/16

115/16

15/16

��/8

15/16

111/16

115/16

2�/827/815/16

�7/8111/16

115/16

2�/827/8��/8

––

1/4–

1/4–

1/41/4–

1/4–

1/41/41/41/41/41/41/41/41/41/4–

1/41/41/41/4–

1/4–

1/41/41/4––

––

�/16

–�/16

–�/8

�/16

–�/8

–�/8

9/16

1/2

9/16

�/8

11/16

1/2

9/16

9/16

�/8

–1/2

9/16

9/16

11/16

–7/16

–9/16

9/16

11/16

––

5/85/8–1–

11/4––

11/2–

11/4––––––––––

15/8––––

15/8

–11/2–––

11/2

11/2

––1–1–

1�/81–

1�/8–

1�/82

15/817/81�/821/415/817/82

1�/8–

15/817/82

21/4–

15/8–

17/8

221/4––

411/16

411/16

47/851/4

415/16

59/16

55/16

51/16

515/16

57/16

511/16

665/8

61/461/26

67/861/461/265/8

65/16

7�/16

69/16

61�/16

615/16

7�/16

7�/16

71/16

711/16

75/16

77/16

711/16

711/16

711/16

1/41/4–

1/2

–5/8

––

�/4–

5/8––––––––––

5/8––––

5/8–1/2–––

1/21/2

115/16

115/16

115/16

25/16

115/16

29/16

25/16

115/16

21�/16

25/16

29/16

27/16

�1/16

211/16

215/16

27/16

�5/16

211/16

215/16

�1/16

27/16

�5/16

211/16

215/16

�1/16

�5/16

�5/16

21�/16

�7/16

�1/16

��/16

�7/16

�7/16

�7/16

––

1.968–

1.968–

2.4681.968

–2.468

–2.468�.7�52.968�.7�52.4684.�122.968�.7�5�.7�52.468

–2.968�.7�5�.7�55.000

–2.968

–�.625�.7�54.�12

––

* Cushion not available on 1" bore. † On 11/2", 2" and 21/2" bore sizes, the head-end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of three full threads available.n1" bore head is 1�/4" x 11/2". See page 12, Section A.

Add Stroke

Add Stroke

1

11/2

2

21/2

�1/4

4

5

6



Catalog SB0106-7



Head Trunnion MountStyle MT11" - 1 1/2" - 2" - 2 1/2" - 5" and 6" BoreWith Maximum Oversize Rods

Head Trunnion MountStyle MT11 1/2" - 6" Bore


2

R18

4E TD

ETL TL

3

UT

1

G

XG

F J


ZB + STROKE

W

EE

Y

K

MM

C

VA

KK

B

D ACROSSFLATS

NA









Removable Cartridge

2

R18

4E TD

ETL TL

3

UT

1

G

XG

J


ZB + STROKE

WF

EE

Y

K

MM

C

VAA

KK

B

D ACROSSFLATS

SMALLMALE

NA




PA-2

A

NC

9R

od L

ock

21/8

21/4

21/4

2�/825/825/827/8�1/8

�/4

111111

1�/8

EE TD Bore E NPTF F G J K -.001 TL UT LG P

1*11/2

221/2

�1/4

456



Rod Style Style +.000 Dia. 4 2 & 3 -.002Bore MM CC KK A B C D NA V VA VB W WF XG Y ZB

.9991.1241.1241.4991.1241.9991.4991.1242.�741.4991.9991.4992.6241.9992.�741.499�.1241.9992.�742.6241.4994.2491.9992.�742.624�.124�.7491.9994.7492.�742.624�.124�.7494.249

5/8�/4�/411/8�/4

15/8

11/8�/42

11/815/811/821/415/82

11/8�

15/82

21/411/8�1/215/82

21/4�

�1/215/842

21/4�

�1/2�1/2

�/8�/8�/81/2�/85/81/2�/8�/41/25/81/27/85/8

�/41/21

5/8�/47/81/21

5/8�/47/811

5/81

�/47/8111

�/81/21/27/81/2

11/87/81/2

11/27/811/87/8

111/16

11/811/27/8

21/16

11/811/2

111/16

7/8

�11/811/2

111/16

21/16

25/811/8��/811/2

111/16

21/16

25/8�

5/16-247/16-207/16-20�/4-16

7/16-201-14�/4-16

7/16-2011/4-12�/4-161-14�/4-16

11/2-121-14

11/4-12�/4-16

17/8-121-14

11/4-1211/2-12�/4-16

21/2-121-14

11/4-1211/2-1217/8-1221/4-121-14�-12

11/4-1211/2-1217/8-1221/4-1221/2-12

7/16

9/16

9/16

15/16

9/16

15/16

15/16

9/16

111/16

15/16

15/16

15/16

115/16

15/16

111/16

15/16

2�/8

15/16

111/16

115/16

15/16

��/8

15/16

111/16

115/16

2�/827/815/16

�7/8111/16

115/16

2�/827/8��/8

7/16-201/2-201/2-207/8-141/2-2011/4-127/8-141/2-2011/2-127/8-1411/4-127/8-141�/4-1211/4-1211/2-127/8-1421/4-1211/4-1211/2-121�/4-127/8-14�1/4-1211/4-1211/2-121�/4-1221/4-122�/4-1211/4-12��/4-1211/2-121�/4-1221/4-122�/4-12�1/4-12


1/25/85/81

5/8

1�/81

5/81�/41

1�/812

1�/81�/4

121/21�/81�/4

21

�1/21�/81�/4

221/2�

1�/84

1�/4

221/2�

�1/2

1/41/4–

1/2–

5/8––

�/4–

5/8––––––––––

5/8––––

5/8–1/2–––

1/21/2

––

1/4–

1/4–

1/41/4–

1/4–

1/41/41/41/41/41/41/41/41/41/4–

1/41/41/41/4–

1/4–

1/41/41/4––

––

�/16

–�/16

–�/8

�/16

–�/8

–�/8

9/16

1/2

9/16

�/8

11/16

1/2

9/16

9/16

�/8

–1/2

9/16

9/16

11/16

–7/16

–9/16

9/16

11/16

––

5/85/8–1–

11/4––

11/2–

11/4––––––––––

15/8––––

15/8

–11/2–––

11/2

11/2

––1–1–

1�/81–

1�/8

–1�/8

215/8

17/8

1�/8

21/415/817/82

1�/8–

15/8

17/82

21/4–

15/8–

17/82

21/4––

115/16

115/16

115/16

25/16

115/16

29/16

25/16

115/16

21�/16

25/16

29/16

27/16

�1/16

211/16

215/16

27/16

�5/16

211/16

215/16

�1/16

27/16

�5/16

211/16

215/16

�1/16

�5/16

�5/16

21�/16

�7/16

�1/16

��/16

�7/16

�7/16

�7/16

411/16

411/16

47/851/4

415/16

59/16

55/16

51/16

515/16

57/16

511/16

665/8

61/461/26

67/861/461/265/8

65/16

7�/16

69/16

61�/16

615/16

7�/16

7�/16

71/16

711/16

75/16

77/16

711/16

711/16

711/16

1�/41�/41�/421/81�/42�/821/81�/425/821/82�/8

21/427/821/22�/421/4�1/821/22�/4

27/821/4�1/821/22�/427/8�1/8�1/825/8�1/427/8�

�1/4�1/4�1/4

n

221/2

��/4

41/2

51/2

61/2

1/4�/8†

�/8†

�/8†

1/21/21/2�/4

�/8�/8�/8�/8––5/8�/4

11/2

11/2

11/2

11/2

1�/4

1�/4

1�/4

2

�/16

1/45/16

5/16

�/8�/87/16

7/16

1111

11/4

11/4

11/4

11/2

.7501.0001.0001.0001.0001.0001.0001.�75

+.000

�4

41/2

55�/4

61/2

71/2

91/4

�1/2�5/8

�5/8

��/4

41/4

41/4

41/2


Add Stroke

Add Stroke

1

11/2

2

21/2

�1/4

4

5

6



Catalog SB0106-7



Cap Trunnion MountStyle MT21" - 1 1/2" - 2" - 2 1/2" - 5" and 6" BoreWith Maximum Oversize Rods


Cap Trunnion MountStyle MT21 1/2" - 6" Bore

Removable Cartridge


2

R18

4E TD

ETL TL

3

UT

1

G

XJ + STROKE

F J


ZB + STROKE

W

EE

Y

K

MM

C

AV

KK

B

D ACROSSFLATS

NA

2

R18

4E TD

ETL TL

3

UT

1

G

XJ + STROKE

J


ZB + STROKE

WF

EE

Y

K

MM

C

AVA

KK

B

D ACROSSFLATS

NA











PA-2

A

NC

9R

od L

ock



Rod Style Style +.000 Dia. 4 2 & 3 -.002Bore MM CC KK A B C D NA V VA VB W WF Y XJ ZB

.9991.1241.1241.4991.1241.9991.4991.1242.�741.4991.9991.4992.6241.9992.�741.499�.1241.9992.�742.6241.4994.2491.9992.�742.624�.124�.7491.9994.7492.�742.624�.124�.7494.249

5/8�/4�/411/8�/4

15/811/8�/4

211/815/811/821/415/82

11/8�

15/82

21/411/8�1/215/82

21/4�

�1/215/842

21/4�

�1/2�1/2

�/8�/8�/81/2�/85/81/2�/8�/41/25/81/27/85/8

�/41/21

5/8�/47/81/21

5/8�/47/811

5/8

1�/47/8111

�/81/21/27/81/2

11/87/8

1/211/27/811/87/8

111/16

11/811/27/8

21/16

11/811/2

111/16

7/8

�11/811/2

111/16

21/16

25/811/8��/811/2

111/16

21/16

25/8

�

5/16-247/16-207/16-20�/4-16

7/16-201-14�/4-16

7/16-2011/4-12�/4-161-14�/4-16

11/2-121-14

11/4-12�/4-16

17/8-121-14

11/4-1211/2-12�/4-16

21/2-121-14

11/4-1211/2-1217/8-1221/4-121-14�-12

11/4-1211/2-1217/8-1221/4-1221/2-12

7/16

9/16

9/16

15/16

9/16

15/16

15/16

9/16

111/16

15/16

15/16

15/16

115/16

15/16

111/16

15/16

2�/8

15/16

111/16

115/16

15/16

��/8

15/16

111/16

115/16

2�/827/815/16

�7/8111/16

115/16

2�/827/8��/8

7/16-201/2-201/2-207/8-141/2-2011/4-127/8-141/2-2011/2-127/8-1411/4-127/8-141�/4-1211/4-1211/2-127/8-1421/4-1211/4-1211/2-121�/4-127/8-14�1/4-1211/4-1211/2-121�/4-1221/4-122�/4-1211/4-12��/4-1211/2-121�/4-1221/4-122�/4-12�1/4-12


1/25/85/81

5/81�/81

5/81�/41

1�/812

1�/81�/41

21/21�/81�/4

21

�1/21�/81�/42

21/2�

1�/84

1�/4

221/2�

�1/2

1/41/4–

1/2

–5/8––

�/4–

5/8––––––––––

5/8––––

5/8–1/2–––

1/21/2

––

1/4–

1/4–

1/41/4–

1/4–

1/41/41/41/41/41/41/41/41/41/4–

1/41/41/41/4–

1/4–

1/41/41/4––

––

�/16

–�/16

–�/8

�/16

–�/8

–�/8

9/16

1/2

9/16

�/8

11/16

1/2

9/16

9/16

�/8

–1/2

9/16

9/16

11/16

–7/16

–9/16

9/16

11/16

––

5/85/8–1–

11/4––

11/2–

11/4––––––––––

15/8––––

15/8

–11/2–––

11/2

11/2

––1–1–

1�/81–

1�/815/81�/82

15/8

17/8

1�/8

21/415/817/82

1�/8

–15/8

17/8

221/4–

15/8–

17/8

221/4––

115/16

115/16

115/16

25/16

115/16

29/16

25/16

115/16

21�/16

25/16

29/16

27/16

�1/16

211/16

215/16

27/16

�5/16

211/16

215/16

�1/16

27/16

�5/16

211/16

215/16

�1/16

�5/16

�5/16

21�/16

�7/16

�1/16

��/16

�7/16

�7/16

�7/16

411/16

411/16

47/851/4

415/16

59/16

55/16

51/16

515/16

57/16

511/16

665/8

61/461/26

67/861/461/265/8

65/16

7�/16

69/16

61�/16

615/16

7�/16

7�/16

71/16

711/16

75/16

77/16

711/16

711/16

711/16

44

41/841/241/8

4�/4

41/241/451/845/847/85

55/851/451/25

57/851/451/255/851/461/851/25�/4

57/861/861/857/861/261/861/461/261/261/2

�/4

111111

1�/8

EE TD Bore E NPTF F G J K -.001 TL UT LG P

1*11/2

221/2

�1/4

456

n

221/2

��/4

41/2

51/2

61/2

1/4�/8†

�/8†

�/8†

1/21/21/2�/4

�/8�/8�/8�/8––5/8�/4

11/2

11/2

11/2

11/2

1�/4

1�/4

1�/4

2

�/16

1/45/16

5/16

�/8�/87/16

7/16

1111

11/4

11/4

11/4

11/2

21/8

21/4

21/4

2�/825/825/827/8�1/8

.7501.0001.0001.0001.0001.0001.0001.�75

+.000

�4

41/2

55�/4

61/2

71/2

91/4

�1/2�5/8

�5/8

��/4

41/4

41/4

41/2


Add Stroke

Add Stroke

1

11/2

2

21/2

�1/4

4

5

6



Catalog SB0106-7



Intermediate Fixed Trunnion MountStyle MT41 1/2" - 2" - 2 1/2" - 5" and 6" BoreWith Maximum Oversize Rods


Intermediate Fixed Trunnion MountStyle MT41 1/2" - 6" Bore

Removable Cartridge


2

R 1 8

4 E UV TD

E

TM TL TL

3

UM 1

G

XI

F J


ZB + STROKE

W EE

Y

K

MM

BD AC

V

B

KK

D ACROSSFLATS

NA

2

R18

4E UV TD

E

TMTL TL

3

UM1

G J

P + STROKE

LG + STROKE

ZB + STROKE

WFEE

Y

K

MM

BDAC

VA

B

KK

D ACROSSFLATS

NA

XI

Dimension XI to be specified by customer.








Mounting Information – 11/2" to 6" Bore




PA-2

A

NC

9R

od L

ock

115/16

25/16

115/16

29/16

25/16

115/16

21�/16

25/16

29/16

27/16

�1/16

211/16

215/16

27/16

�5/16

211/16

215/16

�1/16

27/16

�5/16

211/16

215/16

�1/16

�5/16

�5/16

21�/16

�7/16

�1/16

��/16

�7/16

�7/16

�7/16

EE TD Bore BD E NPTF F G J K -.001 TL TM UM UV LG P 11/2

221/2

�1/4

456

221/2

��/4

41/2

51/2

61/2

�/8†

�/8†

�/8†

1/21/21/2�/4

�/8�/8�/85/8

––�/4

11/2

11/2

11/2

1�/4

1�/4

1�/4

2

111

11/4

11/4

11/4

11/2

1/45/16

5/16

�/8�/8

7/16

7/16

11/4

11/2

11/2

222

21/2



MinimumStroke

+.000

21/4

21/4

2�/825/8

25/8

27/8

�1/8

1.0001.0001.0001.0001.0001.0001.�75

111111

1�/8

21/2

��1/2

41/2

51/4

61/4

75/8

41/2

551/2

61/2

71/4

81/4

10�/8

21/2

��1/2

41/4

567

1/41/2�/87/87/85/8

11/8

�5/8

�5/8

��/4

41/4

41/4

41/2

5

† On 11/2", 2" and 21/2" bore sizes, the head-end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of three full threads available.

7/16-20�/4-16

7/16-201-14�/4-16

7/16-2011/4-12�/4-161-14�/4-16

11/2-121-14

11/4-12�/4-16

17/8-121-14

11/4-1211/2-12�/4-16

21/2-121-14

11/4-1211/2-1217/8-1221/4-121-14�-12

11/4-1211/2-1217/8-1221/4-1221/2-12

1/2-207/8-141/2-2011/4-127/8-141/2-2011/2-127/8-1411/4-127/8-141�/4-1211/4-1211/2-127/8-1421/4-1211/4-1211/2-121�/4-127/8-14�1/4-1211/4-1211/2-121�/4-1221/4-122�/4-1211/4-12��/4-1211/2-121�/4-1221/4-122�/4-12�1/4-12

5/81

5/8

1�/81

5/81�/41

1�/812

1�/81�/41

21/21�/81�/421

�1/21�/81�/42

21/2�

1�/84

1�/42

21/2�

�1/2


11/2

2

21/2

�1/4

4

5

6

Thread Rod End Dimensions and Envelope Dimensions Affected By Rod Size

1.1241.4991.1241.9991.4991.1242.�741.4991.9991.4992.6241.9992.�741.499�.1241.9992.�742.6241.4994.2491.9992.�742.624�.124�.7491.9994.7492.�742.624�.124�.7494.249

�/411/8�/4

15/811/8�/42

11/815/811/821/415/82

11/8�

15/82

21/411/8�1/215/82

21/4�

�1/215/842

21/4�

�1/2�1/2

�/81/2�/85/81/2�/8�/41/25/81/27/85/8

�/41/21

5/8�/47/81/21

5/8�/47/811

5/8

1�/47/8111

1/27/81/2

11/87/8

1/211/27/811/87/8

111/16

11/811/27/8

21/16

11/811/2

111/16

7/8

�11/811/2

111/16

21/16

25/811/8��/811/2

111/16

21/16

25/8

�

9/16

15/16

9/16

15/16

15/16

9/16

111/16

15/16

15/16

15/16

115/16

15/16

111/16

15/16

2�/8

15/16

111/16

115/16

15/16

��/8

15/16

111/16

115/16

2�/827/815/16

�7/8111/16

115/16

2�/827/8��/8

–1/2–

5/8––

�/4–

5/8––––––––––

5/8––––

5/8–1/2–––

1/21/2

1/4–

1/4–

1/41/4–

1/4–

1/41/41/41/41/41/41/41/41/41/4–

1/41/41/41/4–

1/4–

1/41/41/4––

�/16

–�/16

–�/8

�/16

–�/8

–�/8

9/16

1/2

9/16

�/8

11/16

1/2

9/16

9/16

�/8

–1/2

9/16

9/16

11/16

–7/16

–9/16

9/16

11/16

––

–1–

11/4––

11/2–

11/4––––––––––

15/8––––

15/8

–11/2–––

11/2

11/2

1–1–

1�/81–

1�/8

–1�/8

215/8

17/8

1�/8

21/415/817/82

1�/8

–15/8

17/8

221/4–

15/8–

17/8

221/4––

47/851/4

415/16

59/16

55/16

51/16

515/16

57/16

511/16

665/8

61/461/26

67/861/461/265/8

65/16

7�/16

69/16

61�/16

615/16

7�/16

7�/16

71/16

711/16

75/16

77/16

711/16

711/16

711/16

��/16

�9/16

�5/16

�15/16

�11/16

�5/16

4�/16

�11/16

�15/16

4�/16

41�/16

47/16

411/16

4�/16

51/16

47/16

411/16

41�/16

45/16

51/16

47/16

411/16

41�/16

51/16

51/16

415/16

59/16

5�/16

55/16

59/16

59/16

59/16

Rod Style Style +.000 Dia. 4 2 & 3 -.002 Min.

Bore MM CC KK A B C D NA V VA VB W WF XI Y ZB

Add Stroke

Add Stroke



Catalog SB0106-7



Cap Fixed Clevis MountStyle MP11" - 1 1/2" - 2" - 2 1/2" - 5" and 6" BoreWith Maximum Oversize Rods

The 1", 4", 5" and 6" bore sizes have the tie rod nuts at both ends as shown. Tie rods thread into cap on all other bore sizes.


Cap Fixed Clevis MountStyle MP11 1/2" - 6" Bore

The 1", 4", 5" and 6" bore sizes have the tie rod nuts at both ends as shown. Tie rods thread into cap on all other bore sizes.


Removable Cartridge

2 4

CB CWCW

3

E

1

G

XC + STROKE

FK

J


ZC + STROKE

W

EE

Y

L M

CD

PIVOT PINHARD CHROME PLATED

LR

MR

MM E

KK

D ACROSSFLATS

NA

C

V

B

A

2 4

CB CWCW

3

E

1

G

XC + STROKE

K J


ZC + STROKE

WF

EE

Y

L M

CD


LR

MR

MM E

KK

D ACROSSFLATS

NA

C

VA

B

A











PA-2

A

NC

9R

od L

ock

CD• EE Bore CB -.002 CW E NPTF F G J K L LR M MR LG P

1*11/2

221/2

�1/4

456

**�/4�/4�/4

11/4

11/4

11/4

11/2

21/8

21/4

21/4

2�/825/825/827/8�1/8

n

221/2

��/4

41/2

51/2

61/2

1/4�/8†�/8†�/8†1/21/21/2�/4

�/8�/8�/8�/8––5/8�/4

11/2

11/2

11/2

11/2

1�/4

1�/4

1�/4

2

1111

11/4

11/4

11/4

11/2

�/16

1/45/16

5/16

�/8�/8

7/16

7/16

+.000

.441**.501.501.501.751.751.751

1.001

**1/2

1/2

1/2

5/85/85/8�/4

1/2**�/4�/4�/4

11/4

11/4

11/4

11/2




n 1" bore head is 1�/4" x 11/2". See page 12, Section A. * Cushions not available on 1" bore.** In 1" bore size model only, a single eye mounting, 7/16" thick, is used. Dimension CD (.441") is hole diameter — pin not supplied. • Dimension CD is pin diameter except in 1" bore.

Rod Style Style +.000 Dia. 4 2 & 3 -.002 Bore MM CC KK A B C D NA V VA VB W WF Y XC ZC

.9991.1241.1241.4991.1241.9991.4991.1242.�741.4991.9991.4992.6241.9992.�741.499�.1241.9992.�742.6241.4994.2491.9992.�742.624�.124�.7491.9994.7492.�742.624�.124�.7494.249

5/8�/4�/411/8�/415/811/8�/42

11/815/811/821/415/82

11/8�

15/82

21/411/8�1/215/82

21/4�

�1/215/842

21/4�

�1/2�1/2

�/8�/8�/81/2�/85/81/2�/8�/41/25/81/27/85/8

�/41/21

5/8�/47/81/21

5/8�/47/811

5/81

�/47/8111

�/81/21/27/81/2

11/87/8

1/211/27/811/87/8

111/16

11/811/27/8

21/16

11/811/2

111/16

7/8

�11/811/2

111/16

21/16

25/811/8��/811/2

111/16

21/16

25/8

�

5/16-207/16-207/16-20�/4-16

7/16-201-14�/4-16

7/16-2011/4-12�/4-161-14�/4-16

11/2-121-14

11/4-12�/4-16

17/8-121-14

11/4-1211/2-12�/4-16

21/2-121-14

11/4-1211/2-1217/8-1221/4-121-14�-12

11/4-1211/2-1217/8-1221/4-1221/2-12

7/16

9/16

9/16

15/16

9/16

15/16

15/16

9/16

111/16

15/16

15/16

15/16

115/16

15/16

111/16

15/16

2�/8

15/16

111/16

115/16

15/16

��/8

15/16

111/16

115/16

2�/827/815/16

�7/8111/16

115/16

2�/827/8��/8

7/16-201/2-201/2-207/8-141/2-2011/4-127/8-141/2-2011/2-127/8-1411/4-127/8-141�/4-1211/4-1211/2-127/8-1421/4-1211/4-1211/2-121�/4-127/8-14�1/4-1211/4-1211/2-121�/4-1221/4-122�/4-1211/4-12��/4-1211/2-121�/4-1221/4-122�/4-12�1/4-12


1/25/85/81

5/81�/81

5/81�/41

1�/812

1�/81�/41

21/21�/81�/4

21

�1/21�/81�/4

221/2�

1�/84

1�/4

221/2�

�1/2

1/41/4–

1/2–

5/8––

�/4–

5/8––––––––––

5/8––––

5/8–1/2–––

1/21/2

––1/4–

1/4

–1/4

1/4

–1/4

–1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

–1/4

1/4

1/4

1/4

–1/4

–1/4

1/4

1/4

––

––

�/16

–�/16

–�/8

�/16

–�/8

–�/8

9/16

1/2

9/16

�/8

11/16

1/2

9/16

9/16

�/8

–1/2

9/16

9/16

11/16

–7/16

–9/16

9/16

11/16

––

5/85/8–1–

11/4––

11/2–

11/4––––––––––

15/8––––

15/8

–11/2–––

11/2

11/2

––1–1–

1�/81–

1�/815/81�/82

15/817/81�/821/415/817/82

1�/8–

15/817/82

21/4–

15/8–

17/8

221/4––

115/16

115/16

115/16

25/16

115/16

29/16

25/16

115/16

21�/16

25/16

29/16

27/16

�1/16

211/16

215/16

27/16

�5/16

211/16

215/16

�1/16

27/16

�5/16

211/16

215/16

�1/16

�5/16

�5/16

21�/16

�7/16

�1/16

��/16

�7/16

�7/16

�7/16

55

5�/85�/45�/86

5�/451/2

6�/8

57/861/8

67/8

71/271/8

7�/8

67/8

7�/4

71/8

7�/8

71/271/8

87�/8

75/8

7�/4

88

81/88�/48�/8

81/28�/48�/48�/4

57/16

57/16

57/861/457/861/261/46

67/8

6�/8

65/875/8

81/477/8

81/875/8

81/277/8

81/8

81/4

77/8

8�/481/8

8�/8

81/28�/48�/491/89�/49�/8

91/29�/4

9�/4

9�/4

1/2**�/4�/4�/4

111

11/4

7/16**1/2

1/2

1/2

�/4�/4�/4

1

1/2**5/8

5/8

5/8

15/16

15/16

15/16

1�/16

�1/2**�5/8

�5/8

��/4

41/441/441/25

Add Stroke

Add Stroke

1

11/2

2

21/2

�1/4

4

5

6



Catalog SB0106-7



Side Lug MountStyle MS27" - 14" Bore

4E

ST

SW

SW

SW

SWTS

ETTSQ

3

US1

SW SWXS SS + STROKE

SU SUF


ZB + STROKE

WEE

Y

K

MM

SB4 HOLES

J

2

E –.0052 –.010

G

Side Tap MountStyle MS47" - 14" Bore

4E

3

E

1

XT SN + STROKEF


ZB + STROKE

WEE

Y

K

MM

TN

2

E –.0052 –.010

NT THREAD, ND DEEP4 TAPPED MTG. HOLES

TTSQ

JG











PA-2

A

NC

9R

od L

ock

�1/4

�1/4

41/845/851/2

75/16

79/16

711/16

75/16

715/16

7 9/16

711/16

715/16

715/16

715/16

715/16

715/16

715/16

815/16

91/16

95/16

95/16

95/16

95/16

95/16

95/16

95/16

99/16

91�/16

91�/16

91�/16

91�/16

91�/16

91�/16

91�/16

111/8

111/8

111/8

111/8

111/8

111/8

111/8

78

101214

EE Bore E NPTF F G J K ND NT SB* ST SU SW TN TS US LB P SN SS

87/897/8

12�/8

141/2

17

101/4

111/4

141/8

161/4

191/4

11/16

11/16

7/87/8

11/8

Rod Style Style +.000 Dia. 4 2 & 3 -.002Bore MM CC KK A B C D NA TT V W XS XT Y ZB


8

10

12

14


44447444

51/2

51/2

51/2

77444

51/2

51/2

51/2

77744

51/2

51/2

51/2

7774

51/2

51/2

51/2

777

5/8�/47/85/8

1�/47/8

111111�/47/8

1111111

7/8

11111111111111

11/8

11/2

111/16

11/8

45/8

11/2

111/16

21/16

25/8

��/8

�7/8

41/4

11/2

111/16

21/16

25/8

��/8

�7/8

41/4

45/8

111/16

21/16

25/8

��/8

�7/8

41/4

45/8

21/16

25/8

��/8

�7/8

41/4

45/8

15/16

111/16

115/16

15/16

5�/8

111/16

115/16

2�/8

27/8

��/8

�7/8

4�/8

47/8

111/16

115/16

2�/8

27/8

��/8

�7/8

4�/8

47/8

5�/8

115/16

2�/8

27/8

��/8

�7/8

4�/8

47/8

5�/8

2�/8

27/8

� �/8

�7/8

4�/8

47/8

5�/8

1.9992.�742.6241.9996.2492.�742.624�.124�.7494.2494.7495.2495.7492.�742.624�.124�.7494.2494.7495.2495.7496.2492.624�.124�.7494.2494.7495.2495.7496.249�.124�.7494.2494.7495.2495.7496.249

15/8

221/4

15/8

51/2

221/4

��1/2

�1/2

441/2

52

21/4

��1/2

�1/2

441/2

551/2

21/4

��1/2

�1/2

441/2

551/2

��1/2

�1/2

441/2

551/2

7/8

11/8

11/47/8

11/2

11/8

11/4

11/2

11/2

11/2

11/2

11/2

11/2

11/8

11/4

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/4

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/2

1/4�/8�/81/41/2�/8�/81/21/21/21/21/21/2�/8�/81/21/21/21/21/21/21/2�/81/21/21/21/21/21/21/21/21/21/21/21/21/21/2

25/16

29/16

211/16

25/16

215/16

29/16

211/16

215/16

215/16

215/16

215/16

215/16

215/16

2�/4

27/8

�1/8

�1/8

�1/8

�1/8

�1/8

�1/8

�1/8

27/8

�1/8

�1/8

�1/8

�1/8

�1/8

�1/8

�1/8

��/8

��/8

��/8

��/8

��/8

��/8

��/8

1-1411/4-1211/2-121-144-12

11/4-1211/2-1217/8-1221/4-1221/2-12�-12

�1/4-12�1/2-1211/4-1211/2-1217/8-1221/4-1221/2-12�-12

�1/4-12�1/2-124-12

11/2-1217/8-1221/4-1221/2-12�-12

�1/4-12�1/2-124-12

17/8-1221/4-1221/2-12�-12

�1/4-12�1/2-124-12

11/4-1211/2-121�/4-1211/4-1251/4-1211/2-121�/4-1221/4-122�/4-12�1/4-12��/4-1241/4-124�/4-1211/2-121�/4-1221/4-122�/4-12�1/4-12��/4-1241/4-124�/4-1251/4-121�/4-1221/4-122�/4-12�1/4-12��/4-1241/4-124�/4-1251/4-1221/4-122�/4-12�1/4-12��/4-1241/4-124�/4-1251/4-12

1�/8

1�/4

21�/8

51/2

1�/4

221/2

��1/2

441/2

51�/4

221/2

��1/2

441/2

551/2

221/2

��1/2

441/2

551/2

21/2

��1/2

441/2

551/2

7


21�/16

�1/16

��/16

21�/16

�7/16

�1/16

��/16

�7/16

�7/16

�7/16

�7/16

�7/16

�7/16

�1/8

�1/4

�1/2

�1/2

�1/2

�1/2

�1/2

�1/2

�1/2

�1/4

�1/2

�1/2

�1/2

�1/2

�1/2

�1/2

�1/2

�1�/16

�1�/16

�1�/16

�1�/16

�1�/16

�1�/16

�1�/16

�/4�/4�/4�/4�/4

22

21/4

21/4

2�/4

11/2

11/2

22

21/4

9/16

9/16

11/16

11/16

�/4

71/2

81/2105/8

12�/4

14�/4

�/4�/4

11

11/4

57/857/871/875/887/8

1�/16

1�/16

11/16

11/16

15/16

��/4

��/4

45/851/857/8

11

11/4

11/4

11/2

19/16

19/16

22

21/2

�1/4

�1/4

41/845/8

51/2

*Upper surface spotfaced for socket head cap screw.

Add Stroke

Add Stroke

11/811/811/2

11/2

17/8

�/4-10�/4-101-81-8

11/4-7

�1/2

41/251/271/48�/8

21�/16

�1/16

��/16

21�/16

�7/16

�1/16

��/16

�7/16

�7/16

�7/16

�7/16

�7/16

�7/16

�1/8

�1/4

�1/2

�1/2

�1/2

�1/2

�1/2

�1/2

�1/2

�1/4

�1/2

�1/2

�1/2

�1/2

�1/2

�1/2

�1/2

�1�/16

�1�/16

�1�/16

�1�/16

�1�/16

�1�/16

�1�/16



Catalog SB0106-7

�0 Schrader BellowsDes Plaines, IL USA


Head Square MountStyle ME�7" - 14" Bore

Cap Square MountStyle ME47" - 14" Bore

24E TE

TETTSQ

3

E1

GWF

F J


ZB + STROKE

WEE

Y

K

MM

EB4 HOLES

2 4TE E

TE EB4 HOLES

3

E1

GXK + STROKE

F

KJ


ZJ + STROKE

WEE

Y

MM

Rod End Dimensions — see table 2




Thread Style 4Intermediate Male





�1www.schraderbellows.com


PA-2

A

NC

9R

od L

ock

EE Bore E EB NPTF F G J K TE LB P

78

101214



71/2

81/2105/8

12�/4

14�/4

�/4�/4�/4�/4�/4

22

21/4

21/4

2�/4

11/2

11/2

22

21/4

9/16

9/16

11/16

11/16

�/4

�/4�/4

11

11/4

57/857/871/875/887/8

6.757.579.40

11.1012.87

�1/4

�1/4

41/845/851/2

9/16

11/16

1�/16

1�/16

15/16

Rod Style Style +.000 Dia. 4 2 & 3 -.002Bore MM CC KK A B C D NA TT V W WF Y XK ZB ZJ


8

10

12

14

44447444

51/2

51/2

51/2

77444

51/2

51/2

51/2

77744

51/2

51/2

51/2

7774

51/2

51/2

51/2

777

5/8�/47/85/8

1�/47/8

111111�/47/8

1111111

7/8

11111111111111

11/8

11/2

111/16

11/8

45/8

11/2

111/16

21/16

25/8

��/8

�7/8

41/4

11/2

111/16

21/16

25/8

��/8

�7/8

41/4

45/8

111/16

21/16

25/8

��/8

�7/8

41/4

45/8

21/16

25/8

��/8

�7/8

41/4

45/8

15/16

111/16

115/16

15/16

5�/8

111/16

115/16

2�/8

27/8

��/8

�7/8

4�/8

47/8

111/16

115/16

2�/8

27/8

��/8

�7/8

4�/8

47/8

5�/8

115/16

2�/8

27/8

��/8

�7/8

4�/8

47/8

5�/8

2�/8

27/8

��/8

�7/8

4�/8

47/8

5�/8

1.9992.�742.6241.9996.2492.�742.624�.124�.7494.2494.7495.2495.7492.�742.624�.124�.7494.2494.7495.2495.7496.2492.624�.124�.7494.2494.7495.2495.7496.249�.124�.7494.2494.7495.2495.7496.249

15/8

221/4

15/8

51/2

221/4

��1/2

�1/2

441/2

52

21/4

��1/2

�1/2

441/2

551/2

21/4

��1/2

�1/2

441/2

551/2

��1/2

�1/2

441/2

551/2

7/8

11/8

11/47/8

11/2

11/8

11/4

11/2

11/2

11/2

11/2

11/2

11/2

11/8

11/4

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/4

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/2

1/4�/8�/81/41/2�/8�/81/21/21/21/21/21/2�/8�/81/21/21/21/21/21/21/2�/81/21/21/21/21/21/21/21/21/21/21/21/21/21/2

21�/16

�1/16

��/16

21�/16

�7/16

�1/16

��/16

�7/16

�7/16

�7/16

�7/16

�7/16

�7/16

�1/8

�1/4

�1/2

�1/2

�1/2

�1/2

�1/2

�1/2

�1/2

�1/4

�1/2

�1/2

�1/2

�1/2

�1/2

�1/2

�1/2

�1�/16

�1�/16

�1�/16

�1�/16

�1�/16

�1�/16

�1�/16

51/4

51/2

57/8

51/4

57/8

51/2

55/8

57/8

57/8

57/8

57/8

57/8

57/8

61/4

6�/8

65/8

65/8

65/8

65/8

65/8

65/8

65/8

67/8

71/8

71/8

71/8

71/8

71/8

71/8

71/8

81/8

81/8

81/8

81/8

81/8

81/8

81/8

6�/4

771/8

6�/4

7�/8

771/8

7�/8

7�/8

7�/8

7�/8

7�/8

7�/8

81/4

8�/8

85/8

85/8

85/8

85/8

85/8

85/8

85/8

87/8

91/8

91/8

91/8

91/8

91/8

91/8

91/8

10�/8

10�/8

10�/8

10�/8

10�/8

10�/8

10�/8

75/16

79/16

711/16

75/16

715/16

79/16

711/16

715/16

715/16

715/16

715/16

715/16

715/16

815/16

91/16

95/16

95/16

95/16

95/16

95/16

95/16

95/16

99/16

91�/16

91�/16

91�/16

91�/16

91�/16

91�/16

91�/16

111/8

111/8

111/8

111/8

111/8

111/8

111/8

15/8

17/8

215/8

21/4

17/8

221/4

21/4

21/4

21/4

21/4

21/4

17/8

221/4

21/4

21/4

21/4

21/4

21/4

21/4

221/4

21/4

21/4

21/4

21/4

21/4

21/4

21/4

21/4

21/4

21/4

21/4

21/4

21/4

1-1411/4-1211/2-121-144-12

11/4-1211/2-1217/8-1221/4-1221/2-12�-12

�1/4-12�1/2-1211/4-1211/2-1217/8-1221/4-1221/2-12�-12

�1/4-12�1/2-124-12

11/2-1217/8-1221/4-1221/2-12�-12

�1/4-12�1/2-124-12

17/8-1221/4-1221/2-12�-12

�1/4-12�1/2-124-12

11/4-1211/2-121�/4-1211/4-1251/4-1211/2-121�/4-1221/4-122�/4-12�1/4-12��/4-1241/4-124�/4-1211/2-121�/4-1221/4-122�/4-12�1/4-12��/4-1241/4-124�/4-1251/4-121�/4-1221/4-122�/4-12�1/4-12��/4-1241/4-124�/4-1251/4-1221/4-122�/4-12�1/4-12��/4-1241/4-124�/4-1251/4-12

1�/8

1�/4

21�/8

51/2

1�/4

221/2

��1/2

441/2

51�/4

221/2

��1/2

441/2

551/2

221/2

��1/2

441/2

551/2

21/2

��1/2

441/2

551/2

7

Add Stroke

Add Stroke



Catalog SB0106-7



2

R18

4E UV TD

ETTSQ

TMTL TL

3

UM1

GF J


ZB + STROKE

WEE

Y

BD

K

MM

Cap Trunnion MountStyle MT27" - 14" Bore

Head Trunnion MountStyle MT17" - 14" Bore

Intermediate Fixed Trunnion MountModel MT48" - 14" Bore

24E TD

E TLTLTTSQ

3

UT1

XGF J


ZB + STROKE

WEE

Y

K

MM

18 R

G

24E TD

E TLTLTTSQ

3

UT1

XJ + STROKEF


ZB + STROKE

WEE

Y

K

MM

18 R

G J











��www.schraderbellows.com


PA-2

A

NC

9R

od L

ock

+.000 EE TD Bore BD E NPTF F G J K -.001 TL TM UT UM UV LB P 7

8101214

�/4�/4

11

11/4

71/281/2

105/812�/4

14�/4

�/4�/4�/4�/4�/4

22

21/4

21/4

2�/4

11/211/222

21/4

9/16

9/16

11/16

11/16

�/4

–21/2

��

�1/2


Rod Style Style +.000 Dia. 4 2 & 3 -.002 XI*Bore MM CC KK A B C D NA TT V W XG (Min.) Y XJ ZB


8

10

12

14

44447444

51/2

51/2

51/2

77444

51/2

51/2

51/2

77744

51/2

51/2

51/2

7774

51/2

51/2

51/2

777

5/8�/47/85/8

1�/47/8

111111�/47/8

11111117/8

11111111111111

11/8

11/2

111/16

11/8

45/8

11/2

111/16

21/16

25/8

��/8

�7/8

41/4

11/2

111/16

21/16

25/8

��/8

�7/8

41/4

45/8

111/16

21/16

25/8

��/8

�7/8

41/4

45/8

21/16

25/8

��/8

�7/8

41/4

45/8

15/16

111/16

115/16

15/16

5�/8

111/16

115/16

2�/8

27/8

��/8

�7/8

4�/8

47/8

111/16

115/16

2�/8

27/8

��/8

�7/8

4�/8

47/8

5�/8

115/16

2�/8

27/8

��/8

�7/8

4�/8

47/8

5�/8

2�/8

27/8

��/8

�7/8

4�/8

47/8

5�/8

1.9992.�742.6241.9996.2492.�742.624�.124�.7494.2494.7495.2495.7492.�742.624�.124�.7494.2494.7495.2495.7496.2492.624�.124�.7494.2494.7495.2495.7496.249�.124�.7494.2494.7495.2495.7496.249

15/8

221/4

15/8

51/2

221/4

��1/2

�1/2

441/2

52

21/4

��1/2

�1/2

441/2

551/2

21/4

��1/2

�1/2

441/2

551/2

��1/2

�1/2

441/2

551/2

7/8

11/8

11/47/8

11/2

11/8

11/4

11/2

11/2

11/2

11/2

11/2

11/2

11/8

11/4

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/4

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/2

1/4�/8�/81/41/2�/8�/81/21/21/21/21/21/2�/8�/81/21/21/21/21/21/21/2�/81/21/21/21/21/21/21/21/21/21/21/21/21/21/2

75/16

79/16

711/16

75/16

715/16

79/16

711/16

715/16

715/16

715/16

715/16

715/16

715/16

815/16

91/16

95/16

95/16

95/16

95/16

95/16

95/16

95/16

99/16

91�/16

91�/16

91�/16

91�/16

91�/16

91�/16

91�/16

111/8

111/8

111/8

111/8

111/8

111/8

111/8

1-1411/4-1211/2-121-144-12

11/4-1211/2-1217/8-1221/4-1221/2-12�-12

�1/4-12�1/2-1211/4-1211/2-1217/8-1221/4-1221/2-12�-12

�1/4-12�1/2-124-12

11/2-1217/8-1221/4-1221/2-12�-12

�1/4-12�1/2-124-12

17/8-1221/4-1221/2-12�-12

�1/4-12�1/2-124-12

11/4-1211/2-121�/4-1211/4-1251/4-1211/2-121�/4-1221/4-122�/4-12�1/4-12��/4-1241/4-124�/4-1211/2-121�/4-1221/4-122�/4-12�1/4-12��/4-1241/4-124�/4-1251/4-121�/4-1221/4-122�/4-12�1/4-12��/4-1241/4-124�/4-1251/4-1221/4-122�/4-12�1/4-12��/4-1241/4-124�/4-1251/4-12

1�/8

1�/4

21�/8

51/2

1�/4

221/2

��1/2

441/2

51�/4

221/2

��1/2

441/2

551/2

221/2

��1/2

441/2

551/2

21/2

��1/2

441/2

551/2

7


21�/16

�1/16

��/16

21�/16

�7/16

�1/16

��/16

�7/16

�7/16

�7/16

�7/16

�7/16

�7/16

�1/8

�1/4

�1/2

�1/2

�1/2

�1/2

�1/2

�1/2

�1/2

�1/4

�1/2

�1/2

�1/2

�1/2

�1/2

�1/2

�1/2

�1�/16

�1�/16

�1�/16

�1�/16

�1�/16

�1�/16

�1�/16

661/4

6�/8

665/8

61/4

6�/8

65/8

65/8

65/8

65/8

65/8

65/8

71/4

7�/8

75/8

75/8

75/8

75/8

75/8

75/8

75/8

77/8

81/8

81/8

81/8

81/8

81/8

81/8

81/8

91/4

91/4

91/4

91/4

91/4

91/4

91/4

–––

415/16

59/16

5�/16

55/16

59/16

5�/16

59/16

59/16

59/16

59/16

511/16

51�/16

61/16

61/16

61/16

61/16

61/16

61/16

61/16

51�/16

61/16

61/16

61/16

61/16

61/16

61/16

61/16

61�/16

61�/16

61�/16

61�/16

61�/16

61�/16

61�/16

25/8

27/8

�25/8

�1/4

27/8

��1/4

�1/4

�1/4

�1/4

�1/4

�1/4

��1/8

��/8

��/8

��/8

��/8

��/8

��/8

��/8

�1/8

��/8

��/8

��/8

��/8

��/8

��/8

��/8

�5/8

�5/8

�5/8

�5/8

�5/8

�5/8

�5/8

–91/2

11�/41��/416

1.�751.�751.7501.7502.000

1�/81�/81�/4

1�/4

2

–9�/4

1214

161/4

�1/4�1/441/845/851/2

57/857/871/875/887/8

101/4

111/4

141/8161/418�/4

–121/2

151/2171/2201/4

* Dimension XI to be specified by customer.

Add Stroke

Add Stroke



Catalog SB0106-7



24E R

R

AA

TTSQ

3

E1

GWF

BB

F J


ZB + STROKE

WEE

Y

K

MM

DD

Cap Fixed Clevis MountStyle MP17" - 14" Bore

Tie Rod Extended MountStyle MX�7" - 14" Bore

Model MX� Head Tie Rods Extended, Illustrated. Model MX2 Cap Tie Rods Extended; and Model MX1, Both Ends Tie Rods Extended are also available. All Tie Rod Models can be dimensioned from Model MX� drawing at right.

Models MX� and MX1 not offered in 8" bore, rod diameters 4 1/2", 5" and 5 1/2".

E

3

E

1

XC + STROKEF


ZC + STROKE

WEE

Y

K

MM

CB

2

CW CWJ L MG

4

PIVOT PIN

CD

LR

MR












PA-2

A

NC

9R

od L

ock

+.000 CD* EE Bore AA BB CB -.001 CW DD E NPTF F G J K L LR M MR R LB P

8.19.1

11.21�.�15.4

25/16

25/16

211/16

211/16

��/16

5.7�6.447.929.40

10.90

78

101214


Rod Style Style +.000 Dia. 4 2 & 3 -.002Bore MM CC KK A B C D NA TT V W WF XC Y ZB ZC


8

10

12

14

44447444

51/2

51/2

51/2

77444

51/2

51/2

51/2

77744

51/2

51/2

51/2

7774

51/2

51/2

51/2

777

5/8�/47/85/8

1�/47/8

111111�/47/8

1111111

7/8

11111111111111

11/8

11/2

111/16

11/8

45/8

11/2

111/16

21/16

25/8

��/8

�7/8

41/4

11/2

111/16

21/16

25/8

��/8

�7/8

41/4

45/8

111/16

21/16

25/8

��/8

�7/8

41/4

45/8

21/16

25/8

��/8

�7/8

41/4

45/8

15/16

111/16

115/16

15/16

5�/8

111/16

115/16

2�/8

27/8

��/8

�7/8

4�/8

47/8

111/16

115/16

2�/8

27/8

��/8

�7/8

4�/8

47/8

5�/8

115/16

2�/8

27/8

��/8

�7/8

4�/8

47/8

5�/8

2�/8

27/8

��/8

�7/8

4�/8

47/8

5�/8

1.9992.�742.6241.9996.2492.�742.624�.124�.7494.2494.7495.2495.7492.�742.624�.124�.7494.2494.7495.2495.7496.2492.624�.124�.7494.2494.7495.2495.7496.249�.124�.7494.2494.7495.2495.7496.249

15/8

221/4

15/8

51/2

221/4

��1/2

�1/2

441/2

52

21/4

��1/2

�1/2

441/2

551/2

21/4

��1/2

�1/2

441/2

551/2

��1/2

�1/2

441/2

551/2

7/8

11/8

11/47/8

11/2

11/8

11/4

11/2

11/2

11/2

11/2

11/2

11/2

11/8

11/4

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/4

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/2

1/4�/8�/81/41/2�/8�/81/21/21/21/21/21/2�/8�/81/21/21/21/21/21/21/2�/81/21/21/21/21/21/21/21/21/21/21/21/21/21/2

21�/16

�1/16

��/16

21�/16

�7/16

�1/16

��/16

�7/16

�7/16

�7/16

�7/16

�7/16

�7/16

�1/8

�1/4

�1/2

�1/2

�1/2

�1/2

�1/2

�1/2

�1/2

�1/4

�1/2

�1/2

�1/2

�1/2

�1/2

�1/2

�1/2

�1�/16

�1�/16

�1�/16

�1�/16

�1�/16

�1�/16

�1�/16

81/4

81/2

85/8

81/4

87/8

81/2

85/8

87/8

87/8

87/8

87/8

87/8

87/8

10�/8

101/2

10�/4

10�/4

10�/4

10�/4

10�/4

10�/4

10�/4

111/8

11�/8

11�/8

11�/8

11�/8

11�/8

11�/8

11�/8

127/8

127/8

127/8

127/8

127/8

127/8

127/8

91/4

91/2

95/8

91/4

97/8

91/2

95/8

97/8

97/8

97/8

97/8

97/8

97/8

11�/4

117/8

121/8

121/8

121/8

121/8

121/8

121/8

121/8

127/8

1�1/8

1�1/8

1�1/8

1�1/8

1�1/8

1�1/8

1�1/8

147/8

147/8

147/8

147/8

147/8

147/8

147/8

75/16

79/16

711/16

75/16

715/16

79/16

711/16

715/16

715/16

715/16

715/16

715/16

715/16

815/16

91/16

95/16

95/16

95/16

95/16

95/16

95/16

95/16

99/16

91�/16

91�/16

91�/16

91�/16

91�/16

91�/16

91�/16

111/8

111/8

111/8

111/8

111/8

111/8

111/8

1-1411/4-1211/2-121-144-12

11/4-1211/2-1217/8-1221/4-1221/2-12�-12

�1/4-12�1/2-1211/4-1211/2-1217/8-1221/4-1221/2-12�-12

�1/4-12�1/2-124-12

11/2-1217/8-1221/4-1221/2-12�-12

�1/4-12�1/2-124-12

17/8-1221/4-1221/2-12�-12

�1/4-12�1/2-124-12

11/4-1211/2-121�/4-1211/4-1251/4-1211/2-121�/4-1221/4-122�/4-12�1/4-12��/4-1241/4-124�/4-1211/2-121�/4-1221/4-122�/4-12�1/4-12��/4-1241/4-124�/4-1251/4-121�/4-1221/4-122�/4-12�1/4-12��/4-1241/4-124�/4-1251/4-1221/4-122�/4-12�1/4-12��/4-1241/4-124�/4-1251/4-12

1�/8

1�/4

21�/8

51/2

1�/4

221/2

��1/2

441/2

51�/4

221/2

��1/2

441/2

551/2

221/2

��1/2

441/2

551/2

21/2

��1/2

441/2

551/2

7


15/8

17/8

215/8

21/4

17/8

221/4

21/4

21/4

21/4

21/4

21/4

17/8

221/4

21/4

21/4

21/4

21/4

21/4

21/4

221/4

21/4

21/4

21/4

21/4

21/4

21/4

21/4

21/4

21/4

21/4

21/4

21/4

21/4

* CD is pin diameter.

11/2

11/2

221/2

21/2

1.0001.0001.�751.7502.000

�/4�/4

111/411/4

5/8-185/8-18�/4-16�/4-167/8-14

71/2

81/2

105/8

12�/4

14�/4

�/4�/4

11

11/4

�/4�/4�/4�/4�/4

22

21/4

21/4

2�/4

11/2

11/2

22

21/4

9/16

9/16

11/16

11/16

�/4

11/2

11/2

21/8

21/4

21/2

57/857/871/8

75/8

87/8

11/4

11/4

17/821/82�/8

11

1�/81�/4

2

1�/16

1�/16

15/8

21/8

2�/8

�1/4

�1/4

41/845/8

51/2

Add Stroke

Add Stroke



Catalog SB0106-7



Rod Style Style Dia. 3 7 Bore MM KK3 KK3 A CD2 EX MA MS NR WF XC ZC

�/4�/4�/4�/4�/4�/4�/4�/4�/4

11/8

11/8

11/8

11/8

11/8

11/8

11/8

11/8

11/8

11/8

11/8

11/8

11/8

11/8

11/8

11/8

15/8

15/8

15/8

15/8

15/8

15/8

15/8

—

7/16-20—

7/16-207/16-20

—

7/16-207/16-207/16-20

—

�/4-16�/4-16�/4-16

—

�/4-16�/4-16�/4-16�/4-16

—

�/4-16�/4-16�/4-16�/4-16�/4-16�/4-16

—

1-141-141-141-141-141-14

61/8

61/2

61/8

6�/4

61/2

61/4

71/8

65/8

67/8

77/8

81/2

81/8

8�/8

77/8

8�/4

81/8

8�/8

81/2

81/8

98�/8

85/8

8�/4

99

9�/8

1095/8

9�/4

101010

-.0005.5000

-.0005.5000

-.0005.5000

-.0005.7500

-.0005.7500

-.0005.7500

-.00051.0000

7/16-20**

7/16-20****

7/16-20******

�/4-16******

�/4-16********

�/4-16************

1-14************

Thread

11/2

2

21/2

�1/4

4

5

6

5/8

15/8

1�/8

15/8

1�/4

11�/8

12

1�/8

1�/4

121/2

1�/8

1�/4

21

�1/2

1�/8

1�/4

221/2

�1�/8

41�/4

221/2

��1/2

Add Stroke

11�/8

115/8

1�/8

117/8

1�/8

15/8

1�/8

215/8

17/8

1�/8

21/4

15/8

17/8

21�/8

21/4

15/8

17/8

221/4

21/4

15/8

21/4

17/8

221/4

21/4

21/4

5�/8

5�/4

5�/8

65�/4

51/2

6�/8

57/8

61/8

67/8

71/2

71/8

7�/8

67/8

7�/4

71/8

7�/8

71/2

71/8

87�/8

75/8

7�/4

88

81/8

8�/4

8�/8

81/2

8�/4

8�/4

8�/4

7/16

7/16

7/16

21/�2

21/�2

21/�2

7/8

�/4

�/4

�/4

1

1

1

11/4

5/8

5/8

5/8

1

1

1

11/4

250

250

250

250

250

250

250

Max. Oper. PSI1 PA-2

LUBRICATIONFITTING

CD

MA

A

WF

KK

ZC + STROKEXC + STROKE

NR

MS

4

EX3

2

1

15/16

15/16

15/16

1�/8

1�/8

1�/8

111/16


Spherical Bearing MountStyle MPU�1 1/2" - 6" Bore

1 Maximum operating pressure at 4:1 design factor is based on tensile strength of material. Pressure ratings are based on standard commercial bearing ratings.

2 Dimension CD is hole diameter.� Threads listed are also for a spherical rod eye which match style 9 or style 7.

The spherical rod eye pin diameter matches the cap pin and (if required) needs to be purchased separately; see PA-2 mounting accessories for detailed information.




PA-2

A

NC

9R

od L

ock

11/4

15/8

21/16

2�/8

250

250

250

250

-.00051.0000

-.00051.�750

-.00051.7500

-.00052.0000

15/8

15/8

15/8

15/8

15/8

15/8

15/8

15/8

15/8

15/8

222222222

21/4

21/4

21/4

21/4

21/4

21/4

21/4

21/4

��

81/4

87/8

81/2

85/8

87/8

87/8

87/8

87/8

87/8

87/8

10�/8

101/2

10�/4

10�/4

10�/4

10�/4

10�/4

10�/4

10�/4

111/8

11�/8

11�/8

11�/8

11�/8

11�/8

11�/8

11�/8

127/8

127/8

127/8

127/8

127/8

127/8

127/8

–1-141-141-141-141-141-141-141-141-14

–11/4-1211/4-1211/4-1211/4-1211/4-1211/4-1211/4-1211/4-12

–11/2-1211/2-1211/2-1211/2-1211/2-1211/2-1211/2-12

–17/8-1217/8-1217/8-1217/8-1217/8-1217/8-12

91/2

101/8

9�/4

97/8

101/8

101/8

101/8

101/8

101/8

101/8

121/4

12�/8

125/8

125/8

125/8

125/8

125/8

125/8

125/8

1�5/8

1�7/8

1�7/8

1�7/8

1�7/8

1�7/8

1�7/8

1�7/8

15�/8

15�/8

15�/8

15�/8

15�/8

15�/8

15�/8

1-14******************

11/4-12****************

11/2-12**************

17/8-12************

1�/8

51/2

1�/4

221/2

��1/2

441/2

51�/4

221/2

��1/2

441/2

551/2

221/2

��1/2

441/2

551/2

21/2

��1/2

441/2

551/2

8

10

12

14

7/8

11/2

11/8

11/4

11/2

11/2

11/2

11/2

11/2

11/2

11/8

11/4

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/4

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/2

111/16

27/16

27/8

�5/16

7/8

1�/16

117/�2

1�/4

11/4

17/8

21/2

21/2

LUBRICATIONFITTING

CD

MA

AKK

W


NR

MS

4

EX3

2

1


Spherical Bearing MountStyle MPU�8" - 14" Bore

Rod Style Style Dia. 3 7 Bore MM KK3 KK3 A CD2 EX MA MS NR W XC ZC

Thread Add Stroke Max. Oper. PSI1 PA-2


2 Dimension CD is hole diameter.� Threads listed are also for a spherical rod eye which match style 9 or style 7.

The spherical rod eye pin diameter matches the cap pin and (if required) needs to be purchased separately; see PA-2 mounting accessories for detailed information.


Catalog SB0106-7



CL

CD

Bore Sizes Series PA-2 11/2, 2 & 21/2 31/4, 4 & 5 6 & 8 10 12 14

Part No. 0839470000 0839480000 0839490000 0839500000 0839510000 0839520000 CD CF CW DDEF

FL LRM

MRR

LOADCAPACITY

LBS.

1/2

7/16

1/2

1�/�2

�1/2

11/2

15/16

1/2

5/8

2.05

�/4

21/�2

5/8

17/�2

��/4

5/8

21�/8

7/8

12.76

17/8

�/4

17/�2

51/2

�/4

21/2

111/16

11�/16

4.10

1�/8

1�/16

121/�2

61/2

7/8

�1/2 27/16

1�/8

15/8

4.95

1�/4

117/�2

11/4

29/�2

81/2

11/4

41/2

27/8

1�/4

21/16

6.58

21�/4

11/2

29/�2

105/8

11/2

5�5/16

2 2�/8

7.92

9450 14�00 20�22 �7800 50�755770

CDCL

LOADCAPACITY

LBS.

Bore Sizes Series PA-2 11/2, 2 & 21/2 31/4, 4 & 5 6 & 8 10 12 14

Pivot Pin Part No. 0839620000 0839630000 0839640000 0839650000 0839660000 0839670000.4997-.0004

19/16

.7497-.0005

21/�2

.9997-.0005

21/2

1.�746-.0006

�5/16

1.7496-.0006

47/�2

1.9996-.0007

415/16

19�00 �4�00 65000 105200 1�74008600

Bore Sizes Series PA-2 11/2, 2 & 21/2 31/4, 4 & 5 6 & 8 10 12 14Rod Eye Part No. 1322900000 1322910000 1322920000 1322930000 1322940000 1322950000

.5000-.0005

11/16

7/8

7/16

1�/16

�/4

7/16-207/8

.7500-.0005

111/4

21/�2

11/8

11/16

�/4-16 15/16

1.0000-.0005

11/2

17/8

7/8

11/4

17/16

1-14 11/2

1.�750-.0005

221/8

1�/16

111/16

17/8

11/4-12 2

1.7500-.0005

21/8

21/2

117/�2

21/16

21/8

11/2-12 21/4

2.0000-.0005

27/8

2�/4

1�/4

21/2

21/2

17/8-12 2�/4

CDA

CEEXERLEJKJL

LOADCAPACITY

LBS.2644 9441 16860 28562 4�005 7019�

Schrader Bellows offers a complete range of Cylinder Accessories to assure you of the greatest versatility in present or future cylinder applications. Accessories offered for the respective cylinder include the Rod Eye,

Pivot Pin and Clevis Bracket. To select the proper part number for any desired accessory refer to the charts below.

Clevis Bracket

Pivot Pin

Pivot Pins are furnished with (2) Retainer Rings.

MR

LR

RE

DD DIA4 HOLES

F

M

FL

CW CWCF

+ .004+ .002

RE

CD

LE

CD

JKTHD

ER (MAX)

LUBEFITTING

CE

A

EX

JL DIA.

Spherical Rod Eye

Order to fit Piston Rod Thread Size.

Cylinder Accessories

Cylinder Accessories Spherical Bearing Mount – Style MPU3

Clevis Bracket

Order to fit Cap or Rod Eye.




PA-2

A

NC

9R

od L

ock

Rod Dia. Bore MM LD LF SS ZM

��/8

��/8

��/8

�1/2

��/4

��/4

�5/8

41/8

41/4

41/4

47/8

5�/8

6�/8

SS

MS2

Add Stroke

111/2

221/2

�1/4

45678

101214

Add 2X Stroke

661/8

61/8

61/4

71/2

71/2

7�/4

8�/4

87/8

87/8

10�/8

111/8

1�1/8

—All

Mtgs.

–41/8

41/8

41/4

4�/4

4�/4

551/2

55/8

55/8

65/8

71/8

85/8

LGReplaces:On single rod

mounting styles: All Mtg. Styles

*Mounting style MDT4 not available in 1" and 7" bore sizes.

1/25/85/85/8

111

1�/8

1�/8

1�/8

1�/4

221/2

4�/4

47/8

47/8

566

61/4

771/8

71/8

81/8

85/8

101/8

LB

All dimensions are in inches and apply to standard rod sizes only. For alternate rod sizes, determine all envelope dimensions (within LD dim.) as described above and then use appropriate rod end dimensions for proper rod size from single rod cylinder.

To determine dimensions for a double rod cylinder, first refer to the desired single rod mounting style cylinder shown on preceding pages of this catalog. After selecting necessary dimensions from that drawing, return to this page and supplement the single rod dimensions with those shown on the drawing and dimension table below. Note that double rod cylinders have a head (Dim. G) at both ends and that dimension LD or LF replaces LB or LG. The double rod dimensions differ from, or are in addition to those for single rod cylinders shown on preceding pages and provide the information needed to completely dimension a double rod cylinder. On a double rod cylinder where the two rod ends are different, be sure to clearly state which rod end is to be assembled at which end.

Port position 1 is standard. If other than standard, specify position 2, �, or 4 when viewed from one end only.

If only one end of these Double Rod Cylinders is to be cushioned, be sure to specify clearly which end this will be.

Specify XI dimension from rod end #1.

How to Use Double Rod Cylinder Dimension Drawings

GFK

G F

P + STROKELD + STROKE

ZM + 2 X STROKE

W

EE

Y

MM

VA C

NA

B

W + STROKE

24E R

R

3

E

AA

1

Tie Rod Retained Cartridge1" to 6" Bores

Rod End #1 Rod End #2

G

G K

P + STROKELF + STROKE

ZM + 2 X STROKE

WF

EE

Y

MM

VAA C

NA

B

WF + STROKE

2

BF

3E R

R

4

E

AA

1

Removable Cartridge1" to 6" Bores


MDS2MDX1MDX�

MDT4*

MDF1MDF5

F


ZM + 2 X STROKE

WEE

Y

K

MM

G F

GWF

7" to 14" Bores


Double Rod Models – 1" to 14" Bore

Double Rod Models 1" to 14" Bore


Catalog SB0106-7



Cylinder AccessoriesSchrader Bellows offers a complete range of cylinder accessories to assure you of the greatest versatility in present and future cylinder applications.

Rod End Accessories Accessories offered for the rod end of the cylinder include Rod Clevis, Eye Bracket, Knuckle, Clevis Bracket, and Pivot Pin. To select the proper part number for any desired accessory, refer to the table below or on the opposite page and look in the row to the right of the rod thread in the first column. For economical accessory selection, it is recommended that rod end style 2 be specified on your cylinder order.

Accessory Load Capacity The various accessories have been load rated for your convenience. The load Capacity in lbs. Is the recom-mended maximum load for that accessory based on a 4:1 design factor in tension. (Pivot Pin is rated in shear.) Before specifying, compare the actual load or the tension (pull) force at maximum operating pressure of the cylinder with the load capacity of the accessory you plan to use. If load or pull force of cylinder exceeds load capacity of accessory, consult factory.

† Includes pivot pin.* Cylinder accessory dimensions conform to NFPA recommended standard NFPA/T�.6.8 R1-1984, NFPA recommended standard fluid power systems – cylinder – dimensions for accessories for cataloged square head industrial cylinders.

Part Number

Load Capacity (Lbs.)

Part Number

Load Capacity (Lbs.)

Part Number

Shear Capacity (Lbs.)

5/16-24 0512210000† 2600 0740770000 1700 – – 7/16-20 0509400000 4250 0691950000 4100 0683680000 86001/2-20 0509410000 4900 0691950000 4100 0683680000 86003/4-16 0509420000 11200 0691960000 10500 0683690000 193003/4-16 1332840000 11200 0691960000 10500 0683690000 193007/8-14 0509430000 18800 *0853610000 20400 0683700000 343001-14 0509440000 19500 *0853610000 20400 0683700000 343001-14 1332850000 19500 *0853610000 20400 0683700000 34300

1 1/4-12 0509450000 33500 0691980000 21200 0683710000 650001 1/4-12 1332860000 33500 0691980000 21200 0683710000 650001 1/2-12 0509460000 45600 *0853620000 49480 0683720000 1052001 3/4-12 0509470000 65600 *0853630000 70000 0683730000 1374001 7/8-12 0509480000 65600 *0853630000 70000 0683730000 1374002 1/4-12 0509490000 98200 *0853640000 94200 0683740000 2147002 1/2-12 0509500000 98200 *0853650000 121900 0683750000 3092002 3/4-12 0509510000 98200 *0853650000 121900 0683750000 3092003 1/4-12 0509520000 156700 0735380000 57400 0735450000 4209003 1/2-12 0509530000 193200 0735390000 75000 0735470000 565800

4-12 0509540000 221200 0735390000 75000 0735470000 565800

Rod ClevisThread

Size

Pivot PinMounting Plate or Eye Bracket





PA-2

A

NC

9R

od L

ock

* Cylinder accessory dimensions conform to NFPA recommended standard NFPA/T�.6.8 R1-1984, NFPA recommended standard fluid power systems - cylinder - dimensions for accessories for cataloged square head industrial cylinders.

Mounting Plate or Eye Bracket Dimensions

MR

LR

RE

DD DIA4 HOLES

F

M 25˚

FL

CB

+ .004+ .002

RE

CD 1. When used to mate with the Rod Clevis, select by thread size in table on opposite page.

2. When used to mount the Style MP1 Cylinders, select by bore size below.

CBCW CWER

KK THREAD

+.004+.002CD

A

CE

Rod Clevis Dimensions

Pivot Pin Dimensions

CL

CD+.001

.002

†Includes Pivot Pin‡Consult appropriate cylinder rod end dimensions for compatibility.

Part Number CB CD DD E F FL LR MR R Bore

0740770000 5/16 5/16 17/64 2 1/4 3/8 1 5/8 1/2 1.75 1"0691950000 3/4 1/2 13/32 2 1/2 3/8 1 1/8 3/4 9/16 1.63 1 1/2", 2", 2 1/2"0691960000 1 1/4 3/4 17/32 3 1/2 5/8 1 7/8 1 1/4 7/8 2.55 3 1/4", 4", 5"*0853610000 1 1/2 1 21/32 4 1/2 7/8 2 3/8 1 1/2 1 1/4 3.25 6", 7", 8"0691980000 2 1 3/8 21/32 5 7/8 3 2 1/8 1 5/8 3.82 10"*0853620000 2 1/2 1 3/4 29/32 6 1/2 1 1/8 3 3/8 2 1/4 2 1/8 4.95 12"*0853630000 2 1/2 2 1 1/16 7 1/2 1 1/2 4 2 1/2 2 7/16 5.73 14"*0853640000 3 2 1/2 1 3/16 8 1/2 1 3/4 4 3/4 3 3 6.58 – *0853650000 3 3 1 5/16 9 1/2 2 5 1/4 3 1/4 3 1/4 7.50 – 0735380000 4 3 1/2 1 13/16 12 5/8 1 11/16 5 11/16 4 4 1/8 9.62 – 0735390000 4 1/2 4 2 1/16 14 7/8 1 15/16 6 7/16 4 1/2 5 1/4 11.45 – 4

2 1/22

2 3/43 1/2

3/41

1 3/81 3/4

M

3/81/2


1. Pivot Pins are furnished with Clevis Mounted Cylinders as standard.

2. Pivot Pins are furnished with (2) Retainer Rings.

�. Pivot Pins must be ordered as a separate item if to be used with Knuckles, Rod Clevises, or Clevis Brackets.

• This size supplied with cotter pins.

‡‡‡

Part Number A CB CD CE CW ER KK Part Number CD CL

0512210000† 13/16 11/32 5/16 2 1/4 13/64 19/64 5/16-24 0683680000 1/2 1 7/80509400000 3/4 3/4 1/2 1 1/2 1/2 1/2 7/16-20 0683690000 3/4 2 5/80509410000 3/4 3/4 1/2 1 1/2 1/2 1/2 1/2-20 0683700000 1 3 1/80509420000 1 1/8 1 1/4 3/4 2 1/8 5/8 3/4 3/4-16 0683710000 1 3/8 4 1/81332840000 1 1/8 1 1/4 3/4 2 3/8 5/8 3/4 3/4-16 0683720000 1 3/4 5 3/160509430000 1 5/8 1 1/2 1 2 15/16 3/4 1 7/8-14 0683730000 2 5 3/160509440000 1 5/8 1 1/2 1 2 15/16 3/4 1 1-14 0683740000 2 1/2 6 3/161332850000 1 5/8 1 1/2 1 3 1/8 3/4 1 1-14 0683750000 3 6 1/40509450000 1 7/8 2 1 3/8 3 3/4 1 1 3/8 1 1/4-12 0735450000 3 1/2 8 1/41332860000 2 2 1 3/8 4 1/8 1 1 3/8 1 1/4-12 0735470000• 4 90509460000 2 1/4 2 1/2 1 3/4 4 1/2 1 1/4 1 3/4 1 1/2-120509470000 3 2 1/2 2 5 1/2 1 1/4 2 1 3/4-120509480000 3 2 1/2 2 5 1/2 1 1/4 2 1 7/8-120509490000 3 1/2 3 2 1/2 6 1/2 1 1/2 2 1/2 2 1/4-120509500000 3 1/2 3 3 6 3/4 1 1/2 2 3/4 2 1/2-120509510000 3 1/2 3 3 6 3/4 1 1/2 2 3/4 2 3/4-120509520000 3 1/2 4 3 1/2 7 3/4 2 3 1/2 3 1/4-120509530000 4 4 1/2 4 8 13/16 2 1/4 4 3 1/2-120509540000 4 4 1/2 4 8 13/16 2 1/4 4 4-12


Catalog SB0106-7



Accessory Load CapacityThe various accessories have been load rated for your convenience. The load Capacity in lbs. is the recommended maximum load for that accessory based on a 4:1 design factor in tension. (Pivot Pin is rated in shear.) Before specifying, compare the actual load or the tension (pull) force at the maximum operating pressure of the cylinder with the load capacity of the accessory you plan to use. If load or pull force of cylinder exceeds load capacity of accessory, consult factory.

Rod End Accessories Accessories offered for the rod end of the cylinder include Rod Clevis, Eye Bracket, Knuckle, Clevis Bracket, and Pivot Pin. To select the proper part number for any desired accessory, refer to the table below or on the opposite page and look in the row to the right of the rod thread in the first column. For economical accessory selection, it is recommended that rod end style 2 be specified on your cylinder order.



Part Number

Load Capacity

(Lbs.)

Part Number

Load Capacity

(Lbs.)

Part Number

Shear Capacity

(Lbs.)5/16-24 0740750000 3300 0740760000 3600 0740780000 66007/16-20 0690890000 5000 0692050000 7300 0683680000 86001/2-20 0690900000 5700 0692050000 7300 0683680000 86003/4-16 0690910000 12100 0692060000 14000 0683690000 193007/8-14 0690920000 13000 0692070000 19200 0683700000 343001-14 0690930000 21700 0692070000 19200 0683700000 34300

1 1/4-12 0690940000 33500 0692080000 36900 0683710000 650001 1/2-12 0690950000 45000 0692090000 34000 0683720000 1052001 3/4-12 0690960000 53500 0692100000 33000 0692150000 1374001 7/8-12 0690970000 75000 0692100000 33000 0692150000 1374002 1/4-12 0690980000 98700 0692110000 34900 0683740000 2147002 1/2-12 0690990000 110000 0692120000 33800 0683750000 3092002 3/4-12 0691000000 123300 0692130000 36900 0692160000 3092003 1/4-12 0735360000 161300 0735420000 83500 0735450000 4209003 1/2-12 0734370000 217300 0735420000 83500 0735450000 420900

4-12 0734380000 273800 0735430000 102600 0821810000 5658004 1/2-12 0734390000 308500 0735440000 108400 0735470000• 565800

Knuckle

Thread Size

Pivot PinClevis Bracket




PA-2

A

NC

9R

od L

ock

Knuckle Dimensions

Pivot Pin Dimensions

CL

CD+.001

.002CB

CDER +.004+.002

CD CA

CD

CDKK THREAD

A FULLTHREAD

Clevis Bracket Dimensions

25˚MR

LR

RE

DD DIA4 HOLES

F

M

FL

CW CWCB

+ .004+ .002

RE

CD

Cylinder accessory dimensions conform to NFPA recommended standard NFPT/T�.6.8 R1-1984, NFPA recommended standard fluid power systems - cylinder - dimensions for accessories for cataloged square head industrial cylinders.

1. Pivot Pins are furnished with Clevis Mounted Cylinders as standard.

2. Pivot Pins are furnished with (2) Retainer Rings.

�. Pivot Pins must be ordered as a separate item if to be used with Knuckles, Rod Clevises, or Clevis Brackets.

Part Number A CA CB CD ER KK

0740750000 3/4 1 1/2 7/16 7/16 19/32 5/16-240690890000 3/4 1 1/2 3/4 1/2 23/32 7/16-200690900000 3/4 1 1/2 3/4 1/2 23/32 1/2-200690910000 1 1/8 2 1/16 1 1/4 3/4 1 1/16 3/4-160690920000 1 1/8 2 3/8 1 1/2 1 1 7/16 7/8-140690930000 1 5/8 2 13/16 1 1/2 1 1 7/16 1-140690940000 2 3 7/16 2 1 3/8 1 31/32 1 1/4-120690950000 2 1/4 4 2 1/2 1 3/4 2 1/2 1 1/2-120690960000 2 1/4 4 3/8 2 1/2 2 2 27/32 1 3/4-120690970000 3 5 2 1/2 2 2 27/32 1 7/8-120690980000 3 1/2 5 13/16 3 2 1/2 3 9/16 2 1/4-120690990000 3 1/2 6 1/8 3 3 4 1/4 2 1/2-120691000000 3 5/8 6 1/2 3 1/2 3 4 1/4 2 3/4-120735360000 4 1/2 7 5/8 4 3 1/2 4 31/32 3 1/4-120734370000 5 7 5/8 4 3 1/2 4 31/32 3 1/2-120734380000 5 1/2 9 1/8 4 1/2 4 5 11/16 4-120734390000 5 1/2 9 1/8 5 4 5 11/16 4 1/2-12

Part Number CD CL

0740780000 7/16 1 5/160683680000 1/2 1 7/80683690000 3/4 2 5/80683700000 1 3 1/80683710000 1 3/8 4 1/80683720000 1 3/4 5 3/160692150000 2 5 11/160683740000 2 1/2 6 3/160683750000 3 6 1/40692160000 3 6 3/40735450000 3 1/2 8 1/40821810000 4 8 5/80735470000• 4 9

Part Number CB CD CW DD E F FL M MR R

0740760000 15/32 7/16 3/8 17/64 2 1/4 3/8 1 3/8 1/2 1.750692050000 3/4 1/2 1/2 13/32 3 1/2 1/2 1 1/2 1/2 5/8 2.550692060000 1 1/4 3/4 5/8 17/32 5 5/8 1 7/8 3/4 29/32 3.820692070000 1 1/2 1 3/4 21/32 6 1/2 3/4 2 1/4 1 1 1/4 4.950692080000 2 1 3/8 1 21/32 7 1/2 7/8 3 1 3/8 1 21/32 5.730692090000 2 1/2 1 3/4 1 1/4 29/32 9 1/2 7/8 3 5/8 1 3/4 2 7/32 7.500692100000 2 1/2 2 1 1/2 1 1/16 12 3/4 1 4 1/4 2 1/4 2 25/32 9.400692110000 3 2 1/2 1 1/2 1 3/16 12 3/4 1 4 1/2 2 1/2 3 1/8 9.400692120000 3 3 1 1/2 1 5/16 12 3/4 1 6 3 3 19/32 9.400692130000 3 1/2 3 1 1/2 1 5/16 12 3/4 1 6 3 3 19/32 9.400735420000 4 3 1/2 2 1 13/16 15 1/2 1 11/16 6 11/16 3 1/2 4 1/8 12.000735430000 4 1/2 4 2 2 1/16 17 1/2 1 15/16 7 11/16 4 4 7/8 13.750735440000 5 4 2 2 1/16 17 1/2 1 15/16 7 11/16 4 4 7/8 13.75

5 3/45 3/4

LR

5/83/4

1 3/161 1/2

22 3/4

5

3 1/23 3/16

4 1/44 1/4




Catalog SB0106-7



Schrader Bellows “Style 6” Piston Rod EndRod end flange coupling for Schrader Bellows PA-2 and PN Series Pneumatic Cylinders

n Simplifies alignmentn Reduces assembly timen Allows full rated pneumatic pressure in push and pull directionsn Available in 5/8" through 5-1/2" piston rod diameters

Consult Factory for availability of mounting accessories and Hardware.

How To OrderComplete Model Number and place a “6” in the Piston Rod End designator position.Example: PAD11�561x12.00

Style 6 Rod End Dimensions Style 6 Rod End MM Rod Dia. AD AE AF AM WG 5/8 5/8 1/4 �/8 .57 1�/4 1 15/16 �/8 11/16 .95 2�/8

1�/8 11/16 �/8 7/8 1.�2 2�/4 1�/4 15/16 1/2 11/8 1.70 �1/8 2 111/16 5/8 1�/8 1.95 ��/4 21/2 115/16 �/4 1�/4 2.45 41/2

� 27/16 7/8 21/4 2.95 47/8

�1/2 211/16 1 21/2 �.45 55/8

4 211/16 1 � �.95 5�/4

41/2 ��/16 11/2 �1/2 4.45 61/2 5 ��/16 11/2 �7/8 4.95 65/8 51/2 �15/16 17/8 4�/8 5.45 71/2

See Cylinder Catalog for F, G and RT per bore and series.F or RT DEPENDINGON MOUNTING

Ø MM

G

R 1/16

Ø AM

Ø AF

AE

AD

WG

Piston Rod End “Style 6”




PA-2

A

NC

9R

od L

ock

SPLIT WELD ROD BOLT COUPLER PLATE DIA. A B C D E F BOLT SIZE CIRCLE PART NO. PART NO. 5/8 1.50 2.00 .50 .56 .250 4 #10-24 x .94 LG 1.125 1472�40062 1481740062 1 2.00 2.50 .50 .88 .250 6 .250-20 x 1.25 LG 1.500 1472�40100 1481740100 1�/8 2.50 �.00 .6� 1.00 .250 6 .�12-18 x 1.50 LG 2.000 1472�401�8 14817401�8 1�/4 �.00 4.00 .6� 1.25 .250 8 .�12-18 x 1.75 LG 2.�75 1472�40175 1481740175 2 �.50 4.00 .75 1.6� .�75 12 .�75-16 x 2.25 LG 2.687 1472�40200 1481740200 21/2 4.00 4.50 .75 1.88 .�75 12 .�75-16 x 2.50 LG �.187 1472�40250 1481740250 � 5.00 5.50 1.00 2.�8 .�75 12 .500-1� x �.25 LG 4.000 1472�40�00 1481740�00 �1/2 5.88 7.00 1.00 2.6� .�75 12 .625-11 x �.50 LG 4.687 1472�40�50 1481740�50 4 6.�8 7.00 1.00 2.6� .�75 12 .625-11 x �.50 LG 5.187 1472�40400 1481740400 41/2 6.88 8.00 1.00 �.1� .�75 12 .625-11 x 4.00 LG 5.687 1472�40450 1481740450 5 7.�8 8.00 1.00 �.1� .�75 12 .625-11 x 4.00 LG 6.187 1472�40500 1481740500 51/2 8.25 9.00 1.25 �.88 .�75 12 .750-10 x 5.00 LG 6.875 1472�40550 1481740550

Table 1 — Part Numbers and Dimensions

Note: Bolts are not included with split coupler or weld plate.

Schrader Bellows “Style 6” Piston Rod EndSplit Couplers and Weld Plates

WARNING: Piston rod separation from the machine member can result in severe personal injury or even death to nearby personnel. The cylinder user must make sure the weld holding the weld plate to the machine is of sufficient quality and size to hold the intended load. The cylinder user must also make sure the bolts holding split coupler to the weld plate are of sufficient strength to hold the intended load and installed in such a way that they will not become loose during the machine’s operation.

!

Ø E

C D

F BOLTS

Ø A

Ø B

STYLE 6 ROD END

SPLIT COUPLER

WELD PLATE

Piston Rod End “Style 6”


Catalog SB0106-7



When ordering PA-2 Series cylinders, please review the following:How to Order PA-2 Series Cylinders

Note: Duplicate cylinders can be ordered by giving the SERIAL NUMBER from the nameplate of the original cylinder. Factory records supply a quick positive identification.

Piston Rods: Specify model number code based on bore size and rod diameter. Give thread style number for a standard thread or specify dimensions. See “Style 0 Rod End” below.

Cushions: If cushions are required specify according to the model number on the next page. If the cylinder is to have a double rod and only one cushion is required, be sure to specify clearly which end of the cylinder is to be cushioned.

Service PolicyOn cylinders returned to the factory for repairs, it is standard policy for the Industrial Cylinder Division to make such part replacements as will put the cylinder in as good as new condition. Should the condition of the returned cylinder be such that expenses for repair would exceed the costs of a new one, you will be notified.

Address all correspondence and make shipments to, Service Department at your nearest regional plant listed in the pages of this catalog.

Certified DimensionsSchrader Bellows guarantees that all cylinders ordered from this catalog will be built to dimensions shown. All dimensions are certified to be correct, and thus it is not necessary to request certified drawings.

Class 1 SealsClass 1 seals are the seals provided as standard in a cylinder assembly unless otherwise specified. For further information on fluid compatibility or operating limitations of all components, see section C.

For the PA-2 Series cylinders the following make-up Class 1 Seals:

Primary Piston Rod Seal – Nitrile with PTFE back-up washers Piston Rod Wiper – Nitrile Piston Seals – Nitrile with polymyte back-up washers O-Rings – Nitrile

Style 0 Rod EndA style 0 rod end indicates a special rod end configuration. All special piston rod dimensions must have all three: KK; A; and W/WF specified with the rod fully retracted. A sketch or drawing should be submitted for rod ends requiring special machining such as snap ring grooves, keyways, tapers, multiple diameters, etc. It is good design practice to have this machining done on a diameter at least 0.065 inches smaller than the piston rod diameter. This allows the piston rod to have a chamfer preventing rod seal damage during assembly

or maintenance. Standard style 6 rod ends with a longer than standard WG dimension should call out a style 0 rod end and the note: same as 6 except WG=____. A drawing should be submitted for special 6 rod ends that have specific tolerances or special radii. Special rod ends that have smaller than standard male threads, larger than standard female threads, or style 6 rod ends with smaller than standard AF or AE dimensions are to be reviewed by Engineering for proper strength at operating pressure.

Special Modifications: Additional information is required on orders for cylinders with special modifications. This is best handled with descriptive notes. For further information, consult factory.

Fluid Medium: PA-2 Series pneumatic cylinders are equipped with seals for use with lubricated air.

How to Order




PA-2

A

NC

9R

od L

ock

Bore Rod Model No. Size Dia. Code 7" 1�/8" H12 1�/4" H1� 2" H14 8" 1�/8" J12 1�/4" J1� 2" J14 21/2" J15 �" J16 �1/2" J17 4" J18 41/2" J19 5" J41 51/2" J42 10" 1�/4" K1� 2" K14 21/2" K15 �" K16 �1/2" K17 4" K18 41/2" K19 5" K41 51/2" K42 12" 2 L14 21/2" L15 �" L16 �1/2" L17 4" L18 41/2" L19 5" L41 51/2" L42 14" 21/2" M15 �" M16 �1/2" M17 4" M18 41/2" M19 5" M41 51/2" M42

2 Bore Rod Model No. Size Dia. Code 1" 1/2" S50 5/8" S10 11/2" 5/8" A10 1" A11 2" 5/8" B10 1" B11 1�/8" B12 21/2" 5/8" C10 1" C11 1�/8" C12 1�/4" C1� �1/4" 1" D11 1�/8" D12 1�/4" D1� 2" D14 4" 1" E11 1�/8" E12 1�/4" E1� 2" E14 21/2" E15 5" 1" F11 1�/8" F12 1�/4" F1� 2" F14 21/2" F15 �" F16 �1/2" F17 6" 1�/8" G12 1�/4" G1� 2" G14 21/2" G15 �" G16 �1/2" G17 4" G18

How To Order By Model NumberPA-2 Pneumatic Cylinders can be specified by model number by using the tables shown at right.

1. Type Select the Model Number Code which identifies single, double end or non-lube.

2. Bore & Rod Diameter Select the Model Number Code which identifies the desired bore size and rod diameter combination.

3. Mounting & Cushioning Select the Model Number Code which identifies the desired mounting style and cushioning option.

4. Rod End Style Select the Model Number Code which identifies the desired rod end thread style.

5. Seal Type Complete the Model Number by selecting the type of seals desired.

6. Stroke Length It is necessary to specify the stroke length desired following the Model Number. For example: PAA101621 with 6" stroke.

Specifying the Desired Trunnion Location For cylinders with intermediate trunnion mounting, the dimension specified should be the distance from the piston rod reference point to the center-line of the pin.

The Example Would Identify: A single end pneumatic cylinder, 1-1/2" bore size, 5/8" piston rod diameter, side tapped mount, cushioned both ends, with a small male rod thread, Buna N Seals, a 6" stroke.

Optional Mounting Accessories Specify separately the part number for desired optional mounting accessories.

Note: For special modifications other than piston rod ends use S in the tenth position of the model number and describe special features required.Example: PAA101621S 6" Stroke

Cylinder to be Nickel Plated.

1 Model NumberType PA-2 Series PneumaticSingle End PADouble End PBNon-Lube Single End PNNon-Lube Double End PP

3 Model Number Code NFPA Non- Cush. Cush. Cush.Mounting Style Style Cush. Head Cap BothSide Lug MS2 05 06 07 08Side Tap MS4 1� 14 15 16Head Rectangular Flange (1-6) MF1 21 22 2� 24Cap Rectangular Flange (1-6) MF2 25 26 27 28Head Square Flange (1-6) MF5 29 �0 �1 �2Cap Square Flange (1-6) MF6 �� 4 �5 �6Head Square (7-14) ME� �7 �8 �9 40Cap Square (7-14) ME4 41 42 4� 44Tie Rods Extended Both Ends MX1 5� 54 55 56Tie Rods Extended Cap End MX2 57 58 59 60Tie Rods Extended Head End MX� 61 62 6� 64Head Trunnion MT1 69 70 71 72Cap Trunnion MT2 7� 74 75 76Intermediate Fixed Trunnion MT4 77 78 79 80Cap Fixed Clevis MP1 81 82 8� 84Spherical Bearing MPU� 89 90 91 92NO MOUNT MX0 9� 94 95 96

4 Rod End Style Model Number Code Small Male 2 Short Female � Intermediate Male 4 Flange Coupling 6 Female Thread for Spherical Rod Eye 7 Special Specify 0

5 Seal Type Model Number Code Buna N Seals 1 Fluorocarbon Seals 2

6 Specify Stroke Length 6.00"

Model NumberExample:PA A10 16 2 1 W/6" Stroke

How to Order


Catalog SB0106-7



Schrader Bellows Non-Lube Heavy-DutyAir CylindersPN Series

For millions oftrouble free cyclesn Nominal pressure — 250 PSI — Air Servicen Standard Bore Sizes — 1" through 14"n Piston Rod Diameters — 1/2" through 51/2"n 14 Standard Mounting Stylesn NFPA Interchangeablen Exceeds Automotive Specifications

PN Series Non-Lube




PA-2

A

NC

9R

od L

ock

The PN Series Non-Lube Air Cylinderwith Proven PerformanceMillions of trouble free cycles with... ZERO LEAKAGE.

Increased Market Demand and continuous research and testing efforts inspired the development of the PN Series Non-Lubricated Air Cylinder. The PN Series piston rod and cylinder barrel surfaces act as highly efficient lubricant reservoirs, maintaining their own lubricant film. Other manufacturers pack grease into grooves and pockets and call them reservoirs. The fact of the matter is that as those grooves empty out over time; grease is being transported out of the cylinder and into the control system components and the atmosphere. The PN Series concept eliminates that problem by maintaining the lubricant film where it belongs: on the seals, bearing surfaces, piston rod and cylinder bore.

Benefits include...long seal and bearing life and since no oil is added through the use of lubricators – no oil is expelled into the atmosphere with the exhaust air as the cylinder strokes.

Piston Lipseals

High integrity lubricant film with suspended PTFE particles

Increased heel thickness and outer lip extension improve stability, resist rolling.

Drawing not to scale

Gland Lipseal

Anatomy of PN SeriesSealing and Lubricant Retention Systems

Rounded sealing lip glides over lubricant film instead of scraping it off. Reduces friction, increases life and eliminates the need for added lubrication.

PN Series Non-Lube


Catalog SB0106-7



In the PN Series you get all the cost saving benefits and features of the popular heavy-duty PA-2 Series air cylinder including...n Bolt-On Rod Gland Assembly for positive no

leak sealing

n Piston rod, hard chrome-plated and case-hardened steel

n High strength rolled thread Piston Rod Stud

n Steel tube cylinder body with chrome-plated micro finish bore...

Plus the innovative “Non-Lube” feature which further increases your benefits of lower operating and maintenance costs.

Standard Specifications

n Heavy-Duty Service — ANSI/(NFPA) T�.6.7 R2-1996 Mounting Dimension Standards

n Standard Construction — Square Head — Tie Rod Design

n Standard Temperature — -10°F to +165°F

n Standard Fluid — Filtered Air

n Strokes — Available in any practical stroke length

n Cushions — Optional at either end or both ends of stroke. “Float Check” at cap end.

In line with our policy of continuing product improvement, specifications in this bulletin are subject to change.

Available Bore and Rod Sizes

How to Order PN Series Non-Lube Air Cylinders

Data Required on all PN Cylinder Orders

When ordering PN Series cylinders, be sure to specify each of the following requirements:

(Note: Duplicate cylinders can be ordered by giving the SERIAL NUMBER from the nameplate of the original cylinder. Factory records supply a quick, positive identification.)

a) Bore Size

b) Mounting Style Specify your choice of mounting style — as shown in this catalog. If double rod is wanted, specify “with double rod.”

c) Series Designation (PN)

d) Length of Stroke

e) Piston Rod DiameterSpecify rod diameter in PN Series cylinders, standard rod diameters will be furnished if not otherwise specified, unless length of stroke makes the application questionable.

f) Piston Rod End Thread StyleGive thread style number or specify dimensions. Thread style number 2 will be supplied if not otherwise specified.

g) Cushions (if required)Specify “Cushion-head end,” “Cushion-cap end” or “Cushion-both ends” as required. If cylinder is to have a double rod and only one cushion is required, be sure to specify clearly which end of the cylinder is to be cushioned.

Bore Sizes Available 1" 11/2" 2" 21/2" �1/4" 4" 5" 6" 8" 10" 12" 14"

Rod Sizes Available 1/2" 5/8" 1" 1�/8" 1�/4" 2" 21/2" �" �1/2" 4" 41/2" 5" 51/2"

PN Series – Specifications / How to Order



PA-2

A

NC

9R

od L

ock

ContentsSpecifications .....................................................................52Ford Order Code ................................................................53Mounting Dimensions ....................................................54-79Spherical Bearing Mount ...............................................80-81Cylinder Accessories ..........................................................82Double Rod Models ............................................................83

Alignment Coupler ..............................................................84Accessories ........................................................................85Accessories / Cylinder Kits .................................................86Mounting Styles ..................................................................87Schrader Bellows Order Code ............................................88

NC9 Series Medium-Duty Pre-Lubricated Pneumatic Cylinders

Pneumatic CylindersNC9 Series

Catalog SB0106-7



Universal™*

“NC9” Series Medium DutyPre-Lubricated Pneumatic Cylinders* These cylinders are specified for Automotive and Foundry Applications under the brand name “UNIVERSAL”.

Anatomy of Series NC9 Sealing and Lubricant Retention Systems

Rounded sealing lip glides over lubricant film instead of scraping it off. Reduces friction, increases life and eliminates the need for added lubrication.

Increased heel thickness andouter lip extension improve stability, resist rolling.

Drawing not to scaleHigh integrity lubricant film with suspended PTFE particles

GENERAL SPECIFICATIONSNC9 Series Pneumatic Cylinders

INDUSTRY STANDARDS Meets J.I.C. and ANSI/(NFPA) T 3.6.7R2-1996 standards.PRESSURE RATING 250 PSI AirTEMPERATURE RANGE Buna-N Seal: -10°F to +165°FBORE SIZES 1-1/2" through 12"PISTON ROD DIAMETER 1" through 5-1/2"MOUNTINGS 10 styles Ford approvedPISTON END THREAD One standard style; Thread rolled on 1-1/2" through 8" bore size through 1" thread with rounded root radius for maximum strength.CUSHIONS Available at either end or both ends; all bore sizesHEAD AND CAP ENDS Machined from steel blocksPISTON Steel with non-metallic wear ringPISTON RODS 100,000 PSI minimum yield strength steel. Induction hardened to Rc54. Ground, polished and hard chrome plated to a 10 micro-inch finish.TUBE Steel tubing is finished to 10-15 micro-inch finish and I.D. hard chrome plated.TIE RODS High tensile steel with rolled threadsTIE ROD NUTS All steel, prevailing torque typeROUNDED LIP U-CUP Carboxylated Nitrile standard.

General Specifications

Catalog SB0106-7 Pneumatic CylindersNC9 Series



PA-2

A

NC

9R

od L

ock

Ford NC9 Medium Duty Air CylinderOrdering Code

FordSeries

NC9

Mounting Description Code

MX1 Tie Rods Extended Both Ends MX2 Tie Rods Extended Cap End MX3 Tie Rods Extended Head End MF1 Head Rect Flange 11/2"-6" MF2 Cap Rect Flange 11/2"-6" ME3 Head Square 8"-12" ME4 Cap Square 8"-12" MS2 Side Lug MP1 Cap Fixed Clevis MT4 Intermediate Fixed Trunnion

Cylinder Bore and Stroke

Piston Rod Diameter and Rod End Style

Only one rod size is specified per bore Ford spec (Other rod diameters available for replacement only. Modified (see pages 52 & 88) rod ends must be descr bed completely with KK, A, W or WF dimensions. If otherwise special, furnish dimensioned sketch.)

Cushion Location

“C” indicates Cap End Cushion “H” indicates Head End Cushion Cushion Adjust available @ positions 1, 2, 3, or 4

Port Type and Location

“C” indicates Cap End Port “H” indicates Head End Port “P” indicates NPTF pipe thread (standard) “T” indicates SAE straight thread Ports available @ positions 1, 2, or 3

S — Special Modifications

“S” in this position is used to describe all special features that are other than standard, or advise serial number if for replacement.

Ordering Example NC9 MF1 1.5 X 6.0 1.0A CC2-HC2 CP1-HP1 S

NOTE: Add the letter “D” for double rod end cylinder.EXAMPLE: NC9-MDF2

NOTE: Add the letter “K” if key extension is required.EXAMPLE: NC9-MS2K

NC9 cylinders are built to Ford Motor Company Vehicle Operations Specifications. Any deviation from this standard should be approved in writing by Ford Motor Company.

4 2

1

3

Ford Order Code


Catalog SB0106-7



Side Lug MountStyle MS21 1/2" - 2" - 2 1/2" - 5" and 6" BoreWith Maximum Oversize Rods


Side Lug MountStyle MS21 1/2" - 6" Bore

Removable Cartridge


Rod End Dimensions — see table 2Thread Style 2Small Male

“Special” Thread Style 0Special thread, extension, rod eye, blank, etc., are also available.

To order, specify “Style 0” and give desired dimensions for KK, A, W or WF. If otherwise special, furnish dimensioned sketch.

LL LL

AC



Thread Style 5Automotive Male





PA-2

A

NC

9R

od L

ock

Bore E NPTF SAE F G J K SB• ST SU SW TS US LB LG P SS 11/2

221/2

31/4

456

221/2

333/4

41/2

51/2

61/2

3/8†

3/8†

3/8†

1/21/21/23/4

3/8

3/8

3/8

––5/83/4

11/2

11/2

11/2

13/4

13/4

13/4

2

111

11/4

11/4

11/4

11/2

1/45/16

5/16

3/8

3/8

7/16

7/16

31/2

441/2

53/4

61/2

81/4

91/4

35/8

35/8

33/4

41/4

41/4

41/2

5

21/4

21/4

23/825/8

25/8

27/8

31/8

7/16

7/16

7/16

9/16

9/16

13/16

13/16

27/8

27/8

331/4

31/4

31/8

35/8

1/2

1/2

1/2

3/43/4

11

15/16

15/16

15/16

11/4

11/4

19/16

19/16

3/83/8

3/8

1/2

1/2

11/16

11/16

23/4

31/4

33/4

43/4

51/2

67/8

77/8

Rod Style Style +.000 Dia. 4 & 5 2 & 3 -.002Bore MM LL KK A AC B C D NA V VA VB W WF XS Y ZB

1.1241.4991.1241.9991.4991.1242.3741.4991.9991.4992.6241.9992.3741.4993.1241.9992.3742.6241.4994.2491.9992.3742.6243.1243.7491.9994.7492.3742.6243.1243.7494.249

3/411/83/4

15/811/83/42

11/815/811/821/415/82

11/83

15/82

21/411/831/215/82

21/43

31/215/842

21/43

31/231/2

3/81/23/85/81/23/83/41/25/81/27/85/8

3/41/21

5/83/47/81/21

5/83/47/811

5/81

3/47/8111

1/27/81/2

11/87/81/2

11/27/811/87/8

111/16

11/811/27/8

21/16

11/811/2

111/16

7/8

311/811/2

111/16

21/16

25/811/833/811/2

111/16

21/16

25/8

3

7/16-203/4-16

7/16-201-143/4-16

7/16-2011/4-123/4-161-143/4-16

11/2-121-14

11/4-123/4-1617/8-121-14

11/4-1211/2-123/4-1621/2-121-14

11/4-1211/2-1217/8-1221/4-121-143-12

11/4-1211/2-1217/8-1221/4-1221/2-12

9/16

15/16

9/16

15/16

15/16

9/16

111/16

15/16

15/16

15/16

115/16

15/16

111/16

15/16

23/8

15/16

111/16

115/16

15/16

33/8

15/16

111/16

115/16

23/827/815/16

37/8111/16

115/16

23/827/833/8

1/2-207/8-141/2-2011/4-127/8-141/2-2011/2-127/8-1411/4-127/8-1413/4-1211/4-1211/2-127/8-1421/4-1211/4-1211/2-1213/4-127/8-1431/4-1211/4-1211/2-1213/4-1221/4-1223/4-1211/4-1233/4-1211/2-1213/4-1221/4-1223/4-1231/4-12


47/851/4

415/16

59/16

55/16

51/16

515/16

57/16

511/16

665/8

61/461/26

67/861/461/265/8

65/16

73/16

69/16

613/16

615/16

73/16

73/16

71/16

711/16

75/16

77/16

711/16

711/16

711/16

115/16

25/16

115/16

29/16

25/16

115/16

213/16

25/16

29/16

27/16

31/16

211/16

215/16

27/16

35/16

211/16

215/16

31/16

27/16

35/16

211/16

215/16

31/16

35/16

35/16

213/16

37/16

31/16

33/16

37/16

37/16

37/16

13/813/413/82

13/413/821/413/4

217/821/221/823/8

17/823/4

21/823/8

21/221/16

215/16

25/16

29/16

211/16

215/16

215/16

25/16

215/16

29/16

211/16

215/16

215/16

215/16

5/81

5/8

13/81

5/813/41

13/812

13/813/4

121/213/813/4

21

31/213/813/4

221/23

13/84

13/4

221/23

31/2


• Upper surface spot-faced for socket head screws. ** Port adapter fitting furnished at head end only.

–1/2–

5/8––

3/4–

5/8––––––––––

5/8––––

5/8–1/2–––

1/21/2

1/4–

1/4–

1/41/4–

1/4–

1/41/41/41/41/41/41/41/41/41/4–

1/41/41/41/4–

1/4–

1/41/41/4––

3/16

–3/16

–3/8

3/16

–3/8

–3/8

9/16

1/2

9/16

3/8

11/16

1/2

9/16

9/16

3/8

–1/2

9/16

9/16

11/16

–7/16

–9/16

9/16

11/16

––

–1–

11/4––

11/2–

11/4––––––––––

15/8––––

15/8

–11/2–––

11/2

11/2

1–1–

13/81–

13/8–

13/82

15/817/813/821/415/817/82

13/8–

15/817/82

21/4–

15/8–

17/82

21/4––

11/2

2

44

41/8

47/8

47/8

51/8

53/4

Add Stroke

Add Stroke

EE

#6**#6#6

#10#10#10#12

31/4

21/2

4

5

6

11/817/811/821/217/811/83

17/821/217/831/2

21/23

17/8

41/221/23

31/217/8

–21/23

31/241/2–

21/2–3

31/241/2––





Catalog SB0106-7



Side Tap Mount Style MS41 1/2" - 2" - 2 1/2" - 5" and 6" BoreWith Maximum Oversize Rods


Side Tap MountStyle MS41 1/2" - 6" Bore

Removable Cartridge




LL LL

AC









PA-2

A

NC

9R

od L

ock

47/851/4

415/16

59/16

55/16

51/16

515/16

57/16

511/16

665/8

61/461/26

67/861/461/265/8

65/16

73/16

69/16

613/16

615/16

73/16

73/16

71/16

711/16

75/16

77/16

711/16

711/16

711/16

Rod Style Style +.000 Dia. 4 & 5 2 & 3 -.002Bore MM LL KK A AC B C D NA V VA VB W WF XT Y ND ZB

5/81

5/813/81

5/813/41

13/812

13/813/4

121/213/813/4

21

31/213/813/42

21/23

13/84

13/42

21/23

31/2

115/16

25/16

115/16

29/16

25/16

115/16

213/16

25/16

29/16

27/16

31/16

211/16

215/16

27/16

35/16

211/16

215/16

31/16

27/16

35/16

211/16

215/16

31/16

35/16

35/16

213/16

37/16

31/16

33/16

37/16

37/16

37/16

5/87/8

11/4

11/2

21/16

211/16

31/4

44

41/8

47/8

47/8

51/8

53/4

Bore E NPTF SAE F G J K NT TN LB LG P SN 11/22

21/2

31/4

456

221/2

333/4

41/2

51/2

61/2

3/8†3/8†3/8†1/21/21/23/4

3/83/83/85/85/85/83/4

11/211/211/213/4

13/4

13/4

2

111

11/4

11/4

11/4

11/2

1/45/16

5/16

3/83/8

7/16

7/16


**Portadapterfittingfurnishedatheadendonly.



1.1241.4991.1241.9991.4991.1242.3741.4991.9991.4992.6241.9992.3741.4993.1241.9992.3742.6241.4994.2491.9992.3742.6243.1243.7491.9994.7492.3742.6243.1243.7494.249

3/411/83/4

15/811/83/42

11/815/811/821/415/82

11/83

15/82

21/411/831/215/82

21/43

31/215/842

21/43

31/231/2

3/81/23/85/81/23/83/41/25/81/27/85/8

3/41/21

5/83/47/81/21

5/83/47/811

5/81

3/47/8111

1/27/81/2

11/87/81/2

11/27/811/87/8

111/16

11/811/27/8

21/16

11/811/2

111/16

7/8

311/811/2

111/16

21/16

25/811/833/811/2

111/16

21/16

25/8

3

7/16-203/4-16

7/16-201-143/4-16

7/16-2011/4-123/4-161-143/4-16

11/2-121-14

11/4-123/4-16

17/8-121-14

11/4-1211/2-123/4-16

21/2-121-14

11/4-1211/2-1217/8-1221/4-121-143-12

11/4-1211/2-1217/8-1221/4-1221/2-12

9/16

15/16

9/16

15/16

15/16

9/16

111/16

15/16

15/16

15/16

115/16

15/16

111/16

15/16

23/8

15/16

111/16

115/16

15/16

33/8

15/16

111/16

115/16

23/827/815/16

37/8111/16

115/16

23/827/833/8

1/2-207/8-141/2-2011/4-127/8-141/2-2011/2-127/8-1411/4-127/8-1413/4-1211/4-1211/2-127/8-1421/4-1211/4-1211/2-1213/4-127/8-1431/4-1211/4-1211/2-1213/4-1221/4-1223/4-1211/4-1233/4-1211/2-1213/4-1221/4-1223/4-1231/4-12


115/16

25/16

113/16

29/16

25/16

115/16

213/16

25/16

29/16

27/16

31/16

211/16

215/16

27/16

35/16

211/16

215/16

31/16

27/16

35/16

211/16

215/16

31/16

35/16

35/16

213/16

37/16

31/16

33/16

37/16

37/16

37/16

–1/2–

5/8––

3/4–

5/8––––––––––5/8––––

5/8–1/2–––

1/21/2

1/4–

1/4–

1/41/4–

1/4–

1/41/41/41/41/41/41/41/41/41/4–

1/41/41/41/4–

1/4–

1/41/41/4––

3/16

–3/16

–3/8

3/16

–3/8

–3/8

9/16

1/2

9/16

3/8

11/16

1/2

9/16

9/16

3/8

–1/2

9/16

9/16

11/16

–7/16

–9/16

9/16

11/16

––

–1–

11/4––

11/2–

11/4––––––––––

15/8––––

15/8

–11/2–––

11/2

11/2

1–1–

13/81–

13/8

–13/8

215/8

17/8

13/8

21/415/817/8

213/8

–15/8

17/8

221/4–

15/8–

17/8

221/4––

11/2

2

21/2

31/4

4

5

6

3/83/8

11/32

11/32

11/32

7/16

7/16

7/16

7/16

1/21/21/21/25/8

5/8

5/8

5/8

5/8

3/4

3/4

3/4

3/4

3/4

3/4

3/4

7/87/87/87/87/87/87/8

35/8

35/8

33/4

41/4

41/4

41/2

5

21/4

21/4

23/825/8

25/8

27/8

31/8

21/4

21/4

23/825/825/827/831/8

1/4-205/16-183/8-161/2-131/2-135/8-113/4-10

Add Stroke

Add Stroke

#6**#6#6

#10#10#10#12

11/817/811/821/217/811/83

17/821/217/831/2

21/23

17/841/221/23

31/217/8

–21/23

31/241/2–

21/2–3

31/241/2––

EE



Catalog SB0106-7



2 4R E

E SQ. FB4 HOLES

TF

3

UF

1

GK J


ZF + STROKE

WF

EE

Y

F

MM

CA

NA

VA

XF + STROKE

B

2 4R E

E SQ. FB4 HOLES

TF

3

UF

1

GFK

J


ZF + STROKE

W

EE

Y

F

MM

CV

A

B

NA

XF + STROKE

Cap Rectangular Flange MountStyle MF21 1/2" - 2" - 2 1/2" - 5" and 6" BoreWith Maximum Oversize Rods

Cap Rectangular Flange MountStyle MF21 1/2" - 6" Bore


Removable Cartridge


Head Rectangular Flange Mount Style MF11 1/2" - 6" Bore

24E R

E

TF

3

UF

1

FB4 HOLES

G

WF

F J


ZB + STROKE

W

EE

Y

K

MM

CV

A

D ACROSSFLATS

KK

NA

B



LL LL

AC









PA-2

A

NC

9R

od L

ock

5/815/813/815/813/41

13/812

13/813/41

21/213/813/421

31/213/813/42

21/23

13/84

13/42

21/23

31/2

45/85

45/8

51/4

543/4

55/8

51/853/8

55/8

61/4

57/861/8

55/8

61/257/861/8

61/4

57/863/4

61/8

63/8

61/263/463/465/8

71/467/8

771/4

71/4

71/4

Rod Style Style +.000 Dia. 4 & 5 2 & 3 -.002Bore MM LL KK A AC B C D NA V VA VB W WF Y XF ZB ZF

23/4

33/8

37/8411/16

57/16

65/8

75/8

Bore E NPTF SAE F FB G J K R TF UF LB LG P 11/2

221/2

31/4

456


† On 11/2", 2" and 21/2" bore sizes, the head-end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of three full threads available.**Portadapterfittingfurnishedatheadendonly.

221/2

333/4

41/2

51/2

61/2

3/8†

3/8†

3/8†

1/21/21/23/4

3/83/83/85/85/85/83/4

111

11/4

11/4

11/4

11/2

1/45/16

5/16

3/83/87/16

7/16

11/2

11/2

11/2

13/4

13/4

13/4

2

5/16

3/83/87/16

7/16

9/16

9/16

44

41/8

––

51/853/4


1.1241.4991.1241.9991.4991.1242.3741.4991.9991.4992.6241.9992.3741.4993.1241.9992.3742.6241.4994.2491.9992.3742.6243.1243.7491.9994.7492.3742.6243.1243.7494.249

3/411/83/415/811/83/42

11/815/811/821/415/82

11/83

15/82

21/411/831/215/82

21/43

31/215/842

21/43

31/231/2

3/81/23/85/81/23/83/41/25/81/27/85/83/41/21

5/83/47/81/21

5/83/47/811

5/81

3/47/8111

1/27/81/211/87/81/211/27/811/87/8

111/16

11/811/27/8

21/16

11/811/2

111/16

7/83

11/811/2

111/16

21/16

25/811/833/811/2

111/16

21/16

25/83

7/16-203/4-16

7/16-201-143/4-16

7/16-2011/4-123/4-161-143/4-16

11/2-121-14

11/4-123/4-16

17/8-121-14

11/4-1211/2-123/4-16

21/2-121-14

11/4-1211/2-1217/8-1221/4-121-143-12

11/4-1211/2-1217/8-1221/4-1221/2-12

9/16

15/16

9/16

15/16

15/16

9/16

111/16

15/16

15/16

15/16

115/16

15/16

111/16

15/16

23/815/16

111/16

115/16

15/16

33/815/16

111/16

115/16

23/827/815/16

37/8111/16

115/16

23/827/833/8

1/2-207/8-141/2-2011/4-127/8-141/2-2011/2-127/8-1411/4-127/8-1413/4-1211/4-1211/2-127/8-1421/4-1211/4-1211/2-1213/4-127/8-1431/4-1211/4-1211/2-1213/4-1221/4-1223/4-1211/4-1233/4-1211/2-1213/4-1221/4-1223/4-1231/4-12


–1/2–

5/8––3/4–

5/8––––––––––5/8––––5/8–1/2–––1/21/2

1/4–

1/4–

1/41/4–

1/4–

1/41/41/41/41/41/41/41/41/41/4–

1/41/41/41/4–

1/4–

1/41/41/4––

3/16

–3/16

–3/83/16

–3/8–

3/89/16

1/29/16

3/811/16

1/29/16

9/16

3/8–

1/29/16

9/16

11/16

–7/16

–9/16

9/16

11/16

––

–1–

11/4––

11/2–

11/4––––––––––

15/8––––

15/8–

11/2–––

11/211/2

1–1–

13/81–

13/8–

13/82

15/817/813/821/415/817/82

13/8–

15/8

17/82

21/4–

15/8–

17/82

21/4––

1.431.842.192.763.324.104.88

21/4

21/4

23/825/8

25/8

27/8

31/8

33/8

41/8

45/851/2

61/4

75/8

85/8

35/8

35/8

33/4

41/4

41/4

41/2

5

115/16

25/16

115/16

29/16

25/16

115/16

213/16

25/16

29/16

27/16

31/16

211/16

215/16

27/16

35/16

211/16

215/16

31/16

27/16

35/16

211/16

215/16

31/16

35/16

35/16

213/16

37/16

31/16

33/16

37/16

37/16

37/16

553/85

55/853/851/86

51/253/461/467/861/263/4

61/471/861/263/4

67/861/273/8

63/4

771/873/8

73/8

73/8

875/8

73/4

888

Add Stroke

Add Stroke

47/851/4

415/16

59/16

59/16

51/16

515/16

57/16

511/16

55/8

665/8

61/4

61/2

661/4

61/2

65/8

65/16

73/16

69/16

613/16

615/16

73/16

73/16

71/16

711/16

75/16

77/16

711/16

711/16

711/16

#6**#6#6

#10#10#10#12

11/817/811/821/217/811/83

17/821/217/831/221/23

17/841/221/23

31/217/8–

21/23

31/241/2–

21/2–3

31/241/2––

EE


11/2

2

21/2

31/4

4

5

6


Catalog SB0106-7



2 4R TF E

RTF

3

UF

UFE1

FB8 HOLES

GF

K

J


ZF + STROKE

W

EE

Y

F

MM

C

VA

B

NA

24E UF R

RTF

3

TF

UFE1

FB8 HOLES

GF J


ZB + STROKE

W

EE

Y

K

MM

C

VA

KK

B

D ACROSSFLATS

NA

Head Square Flange MountStyle MF51 1/2" - 6" Bore

Cap Square Flange MountStyle MF61 1/2" - 6" Bore


Cap Square Flange MountStyle MF61 1/2" - 2" - 2 1/2" - 5" and 6" BoreWith Maximum Oversize Rods

Removable Cartridge

Removable Cartridge


2 4R TF E

R

TF

3

UF

UFE1

FB8 HOLES

GK J


ZF + STROKE

WF

EE

Y

F

MM

CVA

A

B

NA



LL LL

AC









PA-2

A

NC

9R

od L

ock

5/81

5/813/81

5/813/41

13/812

13/813/4

121/213/813/4

21

31/213/813/4

221/23

13/84

13/4

221/23

31/2

47/851/4

415/16

59/16

55/16

51/16

515/16

57/16

511/16

665/861/461/26

67/861/461/265/8

65/16

73/16

69/16

613/16

615/16

73/16

73/16

71/16

711/16

75/16

77/16

711/16

711/16

711/16

Rod Style Style +.000 Dia. 4 & 5 2 & 3 -.002Bore MM LL KK A AC B C D NA V VA VB W WF Y ZB ZF

115/16

25/16

115/16

29/16

25/16

115/16

213/16

25/16

29/16

27/16

31/16

211/16

215/16

27/16

35/16

211/16

215/16

31/16

27/16

35/16

211/16

215/16

31/16

35/16

35/16

213/16

37/16

31/16

33/16

37/16

37/16

37/16

33/8

41/8

45/851/2

61/4

75/8

85/8

Bore E NPTF SAE F FB G J K R TF UF LB LG P


1.1241.4991.1241.9991.4991.1242.3741.4991.9991.4992.6241.9992.3741.4993.1241.9992.3742.6241.4994.2491.9992.3742.6243.1243.7491.9994.7492.3742.6243.1243.7494.249

3/411/83/4

15/811/83/4

211/815/811/821/415/82

11/83

15/82

21/411/831/215/82

21/43

31/215/842

21/43

31/231/2

3/81/23/85/81/23/83/41/25/81/27/85/83/41/21

5/83/47/8

1/21

5/83/47/811

5/8

13/47/8111

1/27/81/2

11/87/8

1/211/27/811/87/8

111/16

11/811/27/8

21/16

11/811/2

111/16

7/8

311/811/2

111/16

21/16

25/811/833/811/2

111/16

21/16

25/8

3

7/16-203/4-16

7/16-201-143/4-16

7/16-2011/4-123/4-161-143/4-16

11/2-121-14

11/4-123/4-16

17/8-121-14

11/4-1211/2-123/4-1621/2-121-14

11/4-1211/2-1217/8-1221/4-121-143-12

11/4-1211/2-1217/8-1221/4-1221/2-12

9/16

15/16

9/16

15/16

15/16

9/16

111/16

15/16

15/16

15/16

115/16

15/16

111/16

15/16

23/815/16

111/16

115/16

15/16

33/815/16

111/16

115/16

23/827/815/16

37/8111/16

115/16

23/827/833/8

1/2-207/8-141/2-2011/4-127/8-141/2-2011/2-127/8-1411/4-127/8-1413/4-1211/4-1211/2-127/8-1421/4-1211/4-1211/2-1213/4-127/8-1431/4-1211/4-1211/2-1213/4-1221/4-1223/4-1211/4-1233/4-1211/2-1213/4-1221/4-1223/4-1231/4-12


1/4**1/2

1/4**5/8

1/2**1/4**

3/41/2**

5/8

1/4**1/2**3/8**1/2**1/4**5/8**3/8**1/2**1/2**1/4**

5/83/8**1/2**1/2**5/8**

5/81/43/8

3/8**1/2**1/2**

1/21/2

1/4–

1/4–

1/41/4–

1/4–

1/41/41/41/41/41/41/41/41/41/4–

1/41/41/41/4–

1/4–

1/41/41/4––

3/16

–3/16

–3/8

3/16

–3/8–

3/89/16

1/29/16

3/811/16

1/29/16

9/16

3/8–

1/29/16

9/16

11/16

–7/16

–9/16

9/16

11/16

––

1/415/8

11/41

5/811/21

11/43/4

13/8

111/43/4

15/81

11/413/83/4

15/81

11/413/815/815/87/811/211/811/411/211/211/2

1–1–

13/81–

13/8–

13/82

15/817/813/821/415/817/82

13/8–

15/817/8

221/4–

15/8–

17/82

21/4––

553/85

55/853/851/86

51/253/461/467/861/263/461/471/861/263/467/861/273/863/47

71/873/873/873/88

75/873/4888

23/4

33/8

37/8411/16

57/16

65/8

75/8

11/2

221/2

31/4

456

221/2

333/4

41/2

51/2

61/2

3/8†

3/8†

3/8†

1/2

1/2

1/2

3/4

3/83/8

3/8

5/85/85/83/4

111

11/4

11/4

11/4

11/2

1/45/16

5/16

3/83/8

7/16

7/16

11/2

11/2

11/2

13/4

13/4

13/4

2

5/16

3/83/8

7/16

7/16

9/16

9/16

44

41/8

47/847/851/853/4

1.431.842.192.763.324.104.88

21/4

21/4

23/825/8

25/8

27/8

31/8

35/8

35/8

33/4

41/4

41/4

41/2

5



** For all MF5 mounts and MF6 mounts with maximum oversized rods.

Add Stroke

Add Stroke

#6**#6#6

#10#10#10#12

11/817/8

11/8

21/217/811/8

317/8

21/217/831/2

21/23

17/8

41/221/23

31/217/8

–21/23

31/241/2–

21/2–3

31/241/2––

EE


11/2

2

21/2

31/4

4

5

6


Catalog SB0106-7



Tie Rods can be extended: Both Ends — Model MX1; Cap End — Model MX2; Head End — Model MX3.


Tie Rods Extended MountStyle MX11 1/2" - 2" - 2 1/2" - 5" and 6" BoreWith Maximum Oversize Rods

Tie Rods Extended MountStyle MX11 1/2" - 6" Bore

24E R

R

3

E

AA

1

GBB FJ


ZB + STROKE

W

EE

Y

BB

KK

MM

DD

MM

CVA

B

NA

24E

BF

R

R

3

E

AA

1

GBBJ


ZB + STROKE

WF

EE

Y

BB

KK

DD

MM

CVA

A

B

NA



LL LL

AC





Removable Cartridge






PA-2

A

NC

9R

od L

ock

5/81

5/813/81

5/813/41

13/812

13/813/41

21/213/813/421

31/213/813/42

21/23

13/84

13/42

21/23

31/2

1.968–

1.968–

2.4681.968

–2.468

–2.4683.7352.9683.7352.4684.3122.9683.7353.7352.468

–2.9683.7353.7355.000

–2.968

–3.6253.7354.312

––

47/851/4

415/16

59/16

55/16

51/16

515/16

57/16

511/16

665/861/461/26

67/861/461/265/865/16

73/16

69/16

613/16

615/16

73/16

73/16

71/16

711/16

75/16

77/16

711/16

711/16

711/16

21/4

21/4

23/825/825/827/831/8

Rod Style Style +.000 Dia. 4 & 5 2 & 3 -.002Bore MM LL KK A AC B BF C D NA V VA VB W WF Y ZB



1.1241.4991.1241.9991.4991.1242.3741.4991.9991.4992.6241.9992.3741.4993.1241.9992.3742.6241.4994.2491.9992.3742.6243.1243.7491.9994.7492.3742.6243.1243.7494.249

3/411/83/415/811/83/42

11/815/811/821/415/82

11/83

15/82

21/411/831/215/82

21/43

31/215/842

21/43

31/231/2

7/16-203/4-16

7/16-201-14

3/4-167/16-2011/4-123/4-161-14

3/4-1611/2-121-14

11/4-123/4-1617/8-121-14

11/4-1211/2-123/4-1621/2-121-14

11/4-1211/2-1217/8-1221/4-121-143-12

11/4-1211/2-1217/8-1221/4-1221/2-12

1/2-207/8-141/2-2011/4-127/8-141/2-2011/2-127/8-1411/4-127/8-1413/4-1211/4-1211/2-127/8-1421/4-1211/4-1211/2-1213/4-127/8-1431/4-1211/4-1211/2-1213/4-1221/4-1223/4-1211/4-1233/4-1211/2-1213/4-1221/4-1223/4-1231/4-12


Bore AA BB DD E NPTF SAE F G J K R LG P 11/2

221/2

31/4

456

1/45/16

5/16

3/83/87/16

7/16

1.431.842.192.763.324.104.88

35/8

35/8

33/4

41/4

41/4

41/2

5

111

11/4

11/4

11/4

11/2

11/211/211/213/4

13/4

13/4

2

3/83/83/8––

5/83/4

3/8†

3/8†

3/8†

1/21/21/23/4

221/2

333/4

41/2

51/2

61/2

2.022.63.13.94.75.86.9

111/8

11/8

13/8

13/8

113/16

113/16

1/4-285/16-245/16-243/8-243/8-241/2-201/2-20

3/81/23/85/81/23/83/41/25/81/27/85/83/41/21

5/83/47/81/21

5/83/47/811

5/81

3/47/8111

1/27/81/2

11/87/81/2

11/27/811/87/8

111/16

11/811/27/8

21/16

11/811/2

111/16

7/83

11/811/2

111/16

21/16

25/811/833/811/2

111/16

21/16

25/83

9/16

15/16

9/16

15/16

15/16

9/16

111/16

15/16

15/16

15/16

115/16

15/16

111/16

15/16

23/815/16

111/16

115/16

15/16

33/815/16

111/16

115/16

23/827/815/16

37/8111/16

115/16

23/827/833/8

1/4–

1/4–

1/41/4–

1/4–

1/41/41/41/41/41/41/41/41/41/4–

1/41/41/41/4–

1/4–

1/41/41/4––

3/16

–3/16

–3/8

3/16

–3/8–

3/89/16

1/29/16

3/811/16

1/29/16

9/16

3/8–

1/29/16

9/16

11/16

–7/16

–9/16

9/16

11/16

––

–1–

11/4––

11/2–

11/4––––––––––

15/8––––

15/8–

11/2–––

11/211/2

1–1–

13/81–

13/8–

13/82

15/817/813/821/415/817/82

13/8–

15/817/82

21/4–

15/8–

17/82

21/4––

–1/2–

5/8––

3/4–

5/8––––––––––

5/8––––

5/8–1/2–––

1/21/2

115/16

25/16

115/16

29/16

25/16

115/16

213/16

25/16

29/16

27/16

31/16

211/16

215/16

27/16

35/16

211/16

215/16

31/16

27/16

35/16

211/16

215/16

31/16

35/16

35/16

213/16

37/16

31/16

33/16

37/16

37/16

37/16

† On 11/2", 2" and 21/2" bore sizes, the head-end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of three full threads available.** Port adapter fitting furnished at head end only.

Add Stroke

Add Stroke

#6**#6#6#10#10#10#12

11/817/811/821/217/811/83

17/821/217/831/221/23

17/841/221/23

31/217/8–

21/23

31/241/2–

21/2–3

31/241/2––

EE


11/2

2

21/2

31/4

4

5

6


Catalog SB0106-7



Head Trunnion MountStyle MT11 1/2" - 2" - 2 1/2" - 5" and 6" BoreWith Maximum Oversize Rods

Head Trunnion MountStyle MT11 1/2" - 6" Bore


2

R18

4E TD

ETL TL

3

UT

1

G

XG

F J


ZB + STROKE

W

EE

Y

K

MM

C

VA

KK

B

D ACROSSFLATS

NA

2

R18

4E TD

ETL TL

3

UT

1

G

XG

J


ZB + STROKE

WF

EE

Y

K

MM

C

VAA

KK

B

D ACROSSFLATS

NA



LL LL

AC





Removable Cartridge






PA-2

A

NC

9R

od L

ock

5/81

5/813/81

5/813/41

13/812

13/813/41

21/213/813/421

31/213/813/42

21/23

13/84

13/42

21/23

31/2

47/851/4

415/16

59/16

55/16

51/16

515/16

57/16

511/16

665/861/461/26

67/861/461/265/865/16

73/16

69/16

613/16

615/16

73/16

73/16

71/16

711/16

75/16

77/16

711/16

711/16

711/16

111111

13/8

TDBore E NPTF SAE F G J K -.001 TL UT LG P 11/22

21/231/4456



Rod Style Style +.000 Dia. 4 & 5 2 & 3 -.002Bore MM LL KK A AC B C D NA V VA VB W WF XG Y ZB

1.1241.4991.1241.9991.4991.1242.3741.4991.9991.4992.6241.9992.3741.4993.1241.9992.3742.6241.4994.2491.9992.3742.6243.1243.7491.9994.7492.3742.6243.1243.7494.249

3/411/83/4

15/811/83/42

11/815/811/821/415/82

11/83

15/82

21/411/831/215/82

21/43

31/215/842

21/43

31/231/2

3/81/23/85/81/23/83/41/25/81/27/85/83/41/21

5/83/47/81/21

5/83/47/811

5/813/47/8111

1/27/81/2

11/87/81/2

11/27/811/87/8

111/16

11/811/27/8

21/16

11/811/2

111/16

7/83

11/811/2

111/16

21/16

25/811/833/811/2

111/16

21/16

25/8

3

7/16-203/4-16

7/16-201-14

3/4-167/16-2011/4-123/4-161-14

3/4-1611/2-121-14

11/4-123/4-1617/8-121-14

11/4-1211/2-123/4-1621/2-121-14

11/4-1211/2-1217/8-1221/4-121-143-12

11/4-1211/2-1217/8-1221/4-1221/2-12

9/16

15/16

9/16

15/16

15/16

9/16

111/16

15/16

15/16

15/16

115/16

15/16

111/16

15/16

23/8

15/16

111/16

115/16

15/16

33/8

15/16

111/16

115/16

23/827/815/16

37/8111/16

115/16

23/827/833/8

1/2-207/8-141/2-2011/4-127/8-141/2-2011/2-127/8-1411/4-127/8-1413/4-1211/4-1211/2-127/8-1421/4-1211/4-1211/2-1213/4-127/8-1431/4-1211/4-1211/2-1213/4-1221/4-1223/4-1211/4-1233/4-1211/2-1213/4-1221/4-1223/4-1231/4-12


–1/2–

5/8––

3/4–5/8––––––––––5/8––––

5/8–1/2–––

1/21/2

1/4–

1/4–

1/41/4–

1/4–

1/41/41/41/41/41/41/41/41/41/4–

1/41/41/41/4–

1/4–

1/41/41/4––

3/16

–3/16

–3/8

3/16

–3/8–

3/89/16

1/2

9/16

3/811/16

1/2

9/16

9/16

3/8

–1/2

9/16

9/16

11/16

–7/16

–9/16

9/16

11/16

––

–1–

11/4––

11/2–

11/4––––––––––

15/8––––

15/8

–11/2–––

11/211/2

1–1–

13/81–

13/8–

13/82

15/817/813/821/415/817/82

13/8–

15/817/82

21/4–

15/8–

17/82

21/4––

115/16

25/16

115/16

29/16

25/16

115/16

213/16

25/16

29/16

27/16

31/16

211/16

215/16

27/16

35/16

211/16

215/16

31/16

27/16

35/16

211/16

215/16

31/16

35/16

35/16

213/16

37/16

31/16

33/16

37/16

37/16

37/16

13/421/813/423/821/813/425/821/823/8

21/427/821/223/421/431/821/223/427/821/431/821/223/427/831/831/825/831/427/83

31/431/431/4

221/23

33/441/251/261/2

3/8†

3/8†

3/8†

1/21/21/23/4

3/83/83/8––

5/83/4

11/211/211/213/413/413/42

1/45/16

5/16

3/83/8

7/16

7/16

111

11/4

11/4

11/4

11/2

21/4

21/4

23/825/825/827/831/8

1.0001.0001.0001.0001.0001.0001.375

+.000

441/2

553/4

61/2

71/2

91/4

35/8

35/8

33/4

41/4

41/4

41/2

5

† On 11/2", 2" and 21/2" bore sizes, the head-end (only) pipe thread is not full depth on cylinders with maximum oversize rods. Minimum of three full threads available.** Port adapter fitting furnished at head end only.

Add Stroke

Add Stroke

#6**#6#6#10#10#10#12

11/817/811/821/217/811/83

17/821/217/831/221/23

17/841/221/23

31/217/8–

21/23

31/241/2–

21/2–3

31/241/2––

EE


11/2

2

21/2

31/4

4

5

6


Catalog SB0106-7



Cap Trunnion MountStyle MT21 1/2" - 2" 2 1/2" - 5" and 6" BoreWith Maximum Oversize Rods


Cap Trunnion MountStyle MT21 1/2" - 6" Bore

2

R18

4E TD

ETL TL

3

UT

1

G

XJ + STROKE

F J


ZB + STROKE

W

EE

Y

K

MM

C

AV

KK

B

D ACROSSFLATS

NA

2

R18

4E TD

ETL TL

3

UT

1

G

XJ + STROKE

J


ZB + STROKE

WF

EE

Y

K

MM

C

AVA

KK

B

D ACROSSFLATS

NA



LL LL

AC





Removable Cartridge






PA-2

A

NC

9R

od L

ock

5/81

5/813/81

5/813/41

13/812

13/813/41

21/213/813/421

31/213/813/42

21/23

13/84

13/42

21/23

31/2

115/16

25/16

115/16

29/16

25/16

115/16

213/16

25/16

29/16

27/16

31/16

211/16

215/16

27/16

35/16

211/16

215/16

31/16

27/16

35/16

211/16

215/16

31/16

35/16

35/16

213/16

37/16

31/16

33/16

37/16

37/16

37/16

111111

13/8



Rod Style Style +.000 Dia. 4 & 5 2 & 3 -.002Bore MM LL KK A AC B C D NA V VA VB W WF Y XJ ZB

1.1241.4991.1241.9991.4991.1242.3741.4991.9991.4992.6241.9992.3741.4993.1241.9992.3742.6241.4994.2491.9992.3742.6243.1243.7491.9994.7492.3742.6243.1243.7494.249

3/411/83/4

15/811/83/42

11/815/811/821/415/82

11/83

15/82

21/411/831/215/82

21/43

31/215/842

21/43

31/231/2

3/81/23/85/81/23/83/41/25/81/27/85/83/41/21

5/83/47/81/21

5/83/47/811

5/813/47/8111

1/27/81/2

11/87/81/2

11/27/811/87/8

111/16

11/811/27/8

21/16

11/811/2

111/16

7/83

11/811/2

111/16

21/16

25/811/833/811/2

111/16

21/16

25/83

7/16-203/4-16

7/16-201-14

3/4-167/16-2011/4-123/4-161-14

3/4-1611/2-121-14

11/4-123/4-1617/8-121-14

11/4-1211/2-123/4-1621/2-121-14

11/4-1211/2-1217/8-1221/4-121-143-12

11/4-1211/2-1217/8-1221/4-1221/2-12

9/16

15/16

9/16

15/16

15/16

9/16

111/16

15/16

15/16

15/16

115/16

15/16

111/16

15/16

23/815/16

111/16

115/16

15/16

33/8

15/16

111/16

115/16

23/827/815/16

37/8111/16

115/16

23/827/833/8

1/2-207/8-141/2-2011/4-127/8-141/2-2011/2-127/8-1411/4-127/8-1413/4-1211/4-1211/2-127/8-1421/4-1211/4-1211/2-1213/4-127/8-1431/4-1211/4-1211/2-1213/4-1221/4-1223/4-1211/4-1233/4-1211/2-1213/4-1221/4-1223/4-1231/4-12


–1/2–

5/8––

3/4–

5/8––––––––––5/8––––5/8–1/2–––

1/21/2

1/4–

1/4–

1/41/4–

1/4–

1/41/41/41/41/41/41/41/41/41/4–

1/41/41/41/4–

1/4–

1/41/41/4––

3/16

–3/16

–3/8

3/16

–3/8–

3/89/16

1/29/16

3/811/16

1/29/16

9/16

3/8–

1/29/16

9/16

11/16

–7/16

–9/16

9/16

11/16

––

–1–

11/4––

11/2–

11/4––––––––––

15/8––––

15/8–

11/2–––

11/211/2

1–1–

13/81–

13/815/813/82

15/817/813/821/415/817/82

13/8–

15/817/82

21/4–

15/8–

17/82

21/4––

47/851/4

415/16

59/16

55/16

51/16

515/16

57/16

511/16

665/861/461/26

67/861/461/265/865/16

73/16

69/16

613/16

615/16

73/16

73/16

71/16

711/16

75/16

77/16

711/16

711/16

711/16

41/841/241/843/441/241/451/845/847/85

55/851/451/25

57/851/451/255/851/461/851/253/457/861/861/857/861/261/861/461/261/261/2

TD Bore E NPTF SAE F G J K -.001 TL UT LG P 11/22

21/2

31/4

456

221/2

333/4

41/2

51/2

61/2

3/8†

3/8†

3/8†

1/21/21/23/4

3/83/83/8––

5/8

3/4

11/211/211/213/4

13/4

13/4

2

1/45/16

5/16

3/83/87/16

7/16

111

11/4

11/4

11/4

11/2

21/4

21/4

23/825/825/827/831/8

1.0001.0001.0001.0001.0001.0001.375

+.000

441/2

553/4

61/2

71/2

91/4

35/8

35/8

33/4

41/4

41/4

41/2

5


Add Stroke

Add Stroke

#6**#6#6#10#10#10#12

11/817/811/821/217/811/83

17/821/217/831/221/23

17/841/221/23

31/217/8–

21/23

31/241/2–

21/2–3

31/241/2––

EE


11/2

2

21/2

31/4

4

5

6


Catalog SB0106-7



Intermediate Fixed Trunnion MountStyle MT41 1/2" - 2" - 2 1/2" - 5" and 6" BoreWith Maximum Oversize Rods


Intermediate Fixed Trunnion MountStyle MT41 1/2" - 6" Bore

2

R18

4E UV TD

E

TMTL TL

3

UM1

G

XI

F J


ZB + STROKE

WEE

Y

K

MM

BDAC

V

B

KK

D ACROSSFLATS

NA

2

R18

4E UV TD

E

TMTL TL

3

UM1

G J

P + STROKE

LG + STROKE

ZB + STROKE

WFEE

Y

K

MM

BDAC

VA

B

KK

D ACROSSFLATS

NA

XI

u u Dimension XI to be specified by customer.




LL LL

AC





Removable Cartridge






PA-2

A

NC

9R

od L

ock

33/16

39/16

35/16

315/16

311/16

35/16

43/16

311/16

315/16

43/16

413/16

47/16

411/16

43/16

51/16

47/16

411/16

413/16

45/16

51/16

47/16

411/16

413/16

51/16

51/16

415/16

59/16

53/16

55/16

59/16

59/16

59/16

47/851/4

415/16

59/16

55/16

51/16

515/16

57/16

511/16

665/861/461/26

67/861/461/265/865/16

73/16

69/16

613/16

615/16

73/16

73/16

71/16

711/16

75/16

77/16

711/16

711/16

711/16

Rod Style Style +.000 Dia. 4 & 5 2 & 3 -.002 Min.u u

Bore MM LL KK A AC B C D NA V VA VB W WF XI Y ZB

21/2

331/2

41/4

567

115/16

25/16

115/16

29/16

25/16

115/16

213/16

25/16

29/16

27/16

31/16

211/16

215/16

27/16

35/16

211/16

215/16

31/16

27/16

35/16

211/16

215/16

31/16

35/16

35/16

213/16

37/16

31/16

33/16

37/16

37/16

37/16

TD Bore BD E NPTF SAE F G J K -.001 TL TM UM UV LG P

11/22

21/2

31/4

456

221/2

333/4

41/2

51/2

61/2

3/8†

3/8†

3/8†

1/21/21/23/4

3/83/83/85/8

––3/4

11/211/211/213/4

13/4

13/4

2

111

11/4

11/4

11/4

11/2

1/45/16

5/16

3/83/87/16

7/16

11/4

11/2

11/2

222

21/2



MinimumStroke

+.000

21/4

21/4

23/825/825/827/831/8

1.0001.0001.0001.0001.0001.0001.375

111111

13/8

21/2

331/241/2

51/4

61/4

75/8

41/2

551/2

61/2

71/4

81/4

103/8

1/41/23/87/87/85/8

11/8

35/8

35/8

33/4

41/4

41/4

41/2

5


7/16-203/4-16

7/16-201-14

3/4-167/16-2011/4-123/4-161-14

3/4-1611/2-121-14

11/4-123/4-1617/8-121-14

11/4-1211/2-123/4-1621/2-121-14

11/4-1211/2-1217/8-1221/4-121-143-12

11/4-1211/2-1217/8-1221/4-1221/2-12

1/2-207/8-141/2-2011/4-127/8-141/2-2011/2-127/8-1411/4-127/8-1413/4-1211/4-1211/2-127/8-1421/4-1211/4-1211/2-1213/4-127/8-1431/4-1211/4-1211/2-1213/4-1221/4-1223/4-1211/4-1233/4-1211/2-1213/4-1221/4-1223/4-1231/4-12

5/81

5/813/81

5/813/41

13/812

13/813/41

21/213/813/421

31/213/813/42

21/23

13/84

13/42

21/23

31/2



1.1241.4991.1241.9991.4991.1242.3741.4991.9991.4992.6241.9992.3741.4993.1241.9992.3742.6241.4994.2491.9992.3742.6243.1243.7491.9994.7492.3742.6243.1243.7494.249

3/411/83/4

15/811/83/42

11/815/811/821/415/82

11/83

15/82

21/411/831/215/82

21/43

31/215/842

21/43

31/231/2

3/81/23/85/81/23/83/41/25/81/27/85/83/41/21

5/83/47/81/21

5/83/47/811

5/81

3/47/8111

1/27/81/2

11/87/81/2

11/27/811/87/8

111/16

11/811/27/8

21/16

11/811/2

111/16

7/83

11/811/2

111/16

21/16

25/811/833/811/2

111/16

21/16

25/83

9/16

15/16

9/16

15/16

15/16

9/16

111/16

15/16

15/16

15/16

115/16

15/16

111/16

15/16

23/815/16

111/16

115/16

15/16

33/815/16

111/16

115/16

23/827/815/16

37/8111/16

115/16

23/827/833/8

–1/2–

5/8––

3/4–

5/8––––––––––

5/8––––

5/8–1/2–––

1/21/2

1/4–

1/4–

1/41/4–

1/4–

1/4

1/41/41/41/41/41/41/41/41/4–

1/41/41/41/4–

1/4–

1/41/41/4––

3/16

–3/16

–3/8

3/16

–3/8–

3/89/16

1/29/16

3/811/16

1/29/16

9/16

3/8–

1/29/16

9/16

11/16

–7/16

–9/16

9/16

11/16

––

–1–

11/4––

11/2–

11/4––––––––––

15/8––––

15/8–

11/2–––

11/211/2

1–1–

13/81–

13/8–

13/82

15/817/813/821/415/817/82

13/8–

15/817/82

21/4–

15/8–

17/82

21/4––

Add Stroke

Add Stroke

#6**#6#6#10#10#10#12

11/817/811/821/217/811/83

17/821/217/831/221/23

17/841/221/23

31/217/8

–21/23

31/241/2–

21/2–3

31/241/2––

EE


11/2

2

21/2

31/4

4

5

6


Catalog SB0106-7



Cap Fixed Clevis MountStyle MP11 1/2" - 2" - 2 1/2" - 5" and 6" BoreWith Maximum Oversize Rods

The 4", 5" and 6" bore sizes have the tie rod nuts at both ends as shown. Tie rods thread into cap on all other bore sizes.


Cap Fixed Clevis MountStyle MP11 1/2" - 6" Bore

The 4", 5" and 6" bore sizes have the tie rod nuts at both ends as shown. Tie rods thread into cap on all other bore sizes.


Removable Cartridge



LL LL

AC




2 4

CB CWCW

3

E

1

G

XC + STROKE

FK

J


ZC + STROKE

W

EE

Y

L M

CD


LR

MR

MM E

KK

D ACROSSFLATS

NA

C

V

B

A

2 4

CB CW CW

3

E

1

G

XC + STROKE

K J

P + STROKE LG + STROKE

ZC + STROKE

WF

EE

Y

L M

CD

PIVOT PIN HARD CHROME PLATED

LR

MR

MM E

KK

D ACROSSFLATS

NA

C

VA A

B






PA-2

A

NC

9R

od L

ock

5/81

5/813/81

5/813/41

13/812

13/813/41

21/213/813/421

31/213/813/42

21/23

13/84

13/42

21/23

31/2

115/16

25/16

115/16

29/16

25/16

115/16

213/16

25/16

29/16

27/16

31/16

211/16

215/16

27/16

35/16

211/16

215/16

31/16

27/16

35/16

211/16

215/16

31/16

35/16

35/16

213/16

37/16

31/16

33/16

37/16

37/16

37/16

57/861/457/861/261/46

67/863/865/875/881/477/881/875/8

81/277/881/881/477/883/481/883/881/283/483/491/893/493/891/293/493/493/4

5/85/85/83/43/43/41

CD Bore CB -.002 CW E NPTF SAE F G J K L LR M MR LG P11/2

221/2

31/4

456

3/43/43/4

11/411/411/411/2

21/421/423/825/825/827/831/8

221/23

33/441/251/261/2

3/8†3/8†3/8†1/21/21/23/4

3/83/83/8––

5/83/4

11/211/211/213/413/413/42

111

11/411/411/411/2

1/45/16

5/16

3/83/8

7/16

7/16

+.000

.501

.501

.501

.751

.751

.7511.001

1/21/21/25/85/85/83/4

3/43/43/4

11/411/411/411/2




Rod Style Style +.000 Dia. 4 & 5 2 & 3 -.002 Bore MM LL KK A AC B C D NA V VA VB W WF Y XC ZC

1.1241.4991.1241.9991.4991.1242.3741.4991.9991.4992.6241.9992.3741.4993.1241.9992.3742.6241.4994.2491.9992.3742.6243.1243.7491.9994.7492.3742.6243.1243.7494.249

3/411/83/4

15/811/83/42

11/815/811/821/415/82

11/83

15/82

21/411/831/215/82

21/43

31/215/842

21/43

31/231/2

3/81/23/85/81/23/83/41/25/81/27/85/83/41/21

5/83/47/81/21

5/83/47/811

5/81

3/47/8111

1/27/81/2

11/87/81/2

11/27/811/87/8

111/16

11/811/27/8

21/16

11/811/2

111/16

7/83

11/811/2

111/16

21/16

25/811/833/811/2

111/16

21/16

25/83

7/16-203/4-167/16-201-14

3/4-167/16-2011/4-123/4-161-14

3/4-1611/2-121-14

11/4-123/4-1617/8-121-14

11/4-1211/2-123/4-1621/2-121-14

11/4-1211/2-1217/8-1221/4-121-143-12

11/4-1211/2-1217/8-1221/4-1221/2-12

9/16

15/16

9/16

15/16

15/16

9/16

111/16

15/16

15/16

15/16

115/16

15/16

111/16

15/16

23/815/16

111/16

115/16

15/16

33/815/16

111/16

115/16

23/827/815/16

37/8111/16

115/16

23/827/833/8

1/2-207/8-141/2-2011/4-127/8-141/2-2011/2-127/8-1411/4-127/8-1413/4-1211/4-1211/2-127/8-1421/4-1211/4-1211/2-1213/4-127/8-1431/4-1211/4-1211/2-1213/4-1221/4-1223/4-1211/4-1233/4-1211/2-1213/4-1221/4-1223/4-1231/4-12


–1/2–

5/8––

3/4–

5/8––––––––––

5/8––––5/8–1/2–––

1/21/2

1/4–

1/4–

1/41/4–

1/4–

1/41/41/41/41/41/41/41/41/41/4–

1/41/41/41/4–

1/4–

1/41/41/4––

3/16

–3/16

–3/8

3/16

–3/8–

3/89/16

1/29/16

3/811/16

1/29/16

9/16

3/8–

1/29/16

9/16

11/16

–7/16

–9/16

9/16

11/16

––

–1–

11/4––

11/2–

11/4––––––––––

15/8––––

15/8–

11/2–––

11/211/2

1–1–

13/81–

13/815/813/82

15/817/813/821/415/817/82

13/8–

15/817/82

21/4–

15/8–

17/82

21/4––

53/853/453/86

53/451/263/857/861/867/871/271/873/867/873/471/873/871/271/88

73/875/873/488

81/883/483/881/283/483/483/4

3/43/43/4111

11/4

1/21/21/23/43/43/41

35/835/833/441/441/4

41/25

#6**#6#6#10#10#10#12

11/817/811/821/217/811/83

17/821/217/831/221/23

17/841/221/23

31/217/8–

21/23

31/241/2–

21/2–3

31/241/2––

EE Add Stroke

Add Stroke


11/2

2

21/2

31/4

4

5

6


Catalog SB0106-7



Side Lug MountStyle MS28" - 12" Bore

Side Tap MountStyle MS48" - 12" Bore

4E

3

E

1

XT SN + STROKEF


ZB + STROKE

WEE

Y

K

MM

TN

2

E –.0052 –.010

NT THREAD, ND DEEP4 TAPPED MTG. HOLES

TTSQ

JG






4E

ST

SW

SW

SW

SWTS

ETTSQ

3

US1

GSW SW

XS SS + STROKE

SU SUF


ZB + STROKE

WEE

Y

K

MM

SB4 HOLES

J

2

E –.0052 –.010


A AC





PA-2

A

NC

9R

od L

ock

15/16

53/8

111/16

115/16

23/8

27/8

33/8

37/8

43/8

47/8

111/16

115/16

23/8

27/8

33/8

37/8

43/8

47/8

53/8

115/16

23/8

27/8

33/8

37/8

43/8

47/8

53/8

15/8

51/2

221/4

331/2

31/2

441/2

52

21/4

331/2

31/2

441/2

551/2

21/4

331/2

31/2

441/2

551/2

13/8

51/2

13/4

221/2

331/2

441/2

513/4

221/2

331/2

441/2

551/2

221/2

331/2

441/2

551/2

8

10

12

75/16

715/16

79/16

711/16

715/16

715/16

715/16

715/16

715/16

715/16

815/16

91/16

95/16

95/16

95/16

95/16

95/16

95/16

95/16

99/16

913/16

913/16

913/16

913/16

913/16

913/16

913/16

Bore E NPTF SAE F G J K ND NT SB* ST SU SW TN TS US LB P SN SS

57/8

71/875/8

81012

Rod Style Style +.000 Dia. 4 & 5 2 & 3 -.002Bore MM LL KK A AC B C D NA TT V W XS XT Y ZB


33/4

45/851/8

3/43/43/4

221/4

21/4

11/222

9/16

11/16

11/16

81/2105/8

123/4


97/8

123/8141/2

3/4

11

41/251/271/4

11/8

11/211/2

3/4-101-81-8

13/16

11/16

11/16

31/4

41/845/8

47444

51/2

51/2

51/2

77444

51/2

51/2

51/2

77744

51/2

51/2

51/2

777

5/8

13/47/8

1111113/47/8

11111117/8

1111111

11/8

45/8

11/2

111/16

21/16

25/8

333/8

37/8

41/4

11/2

111/16

21/16

25/8

333/8

37/8

41/4

45/8

111/16

21/16

25/8

333/8

37/8

41/4

45/8

1.9996.2492.3742.6243.1243.7494.2494.7495.2495.7492.3742.6243.1243.7494.2494.7495.2495.7496.2492.6243.1243.7494.2494.7495.2495.7496.249

7/8

11/2

11/8

11/4

11/2

11/2

11/2

11/2

11/2

11/2

11/8

11/4

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/4

11/2

11/2

11/2

11/2

11/2

11/2

11/2

1/41/23/83/81/21/21/21/21/21/23/83/81/21/21/21/21/21/21/23/81/21/21/21/21/21/21/2

213/16

37/16

31/16

33/16

37/16

37/16

37/16

37/16

37/16

37/16

31/8

31/4

31/2

31/2

31/2

31/2

31/2

31/2

31/2

31/4

31/2

31/2

31/2

31/2

31/2

31/2

31/2

213/16

37/16

31/16

33/16

37/16

37/16

37/16

37/16

37/16

37/16

31/8

31/4

31/2

31/2

31/2

31/2

31/2

31/2

31/2

31/4

31/2

31/2

31/2

31/2

31/2

31/2

31/2

1-144-12

11/4-1211/2-1217/8-1221/4-1221/2-123-12

31/4-1231/2-1211/4-1211/2-1217/8-1221/4-1221/2-123-12

31/4-1231/2-124-12

11/2-1217/8-1221/4-1221/2-123-12

31/4-1231/2-124-12

11/4-1251/4-1211/2-1213/4-1221/4-1223/4-1231/4-1233/4-1241/4-1243/4-1211/2-1213/4-1221/4-1223/4-1231/4-1233/4-1241/4-1243/4-1251/4-1213/4-1221/4-1223/4-1231/4-1233/4-1241/4-1243/4-1251/4-12


#12#16#16

21/2

–3

31/2

41/2

–––––3

31/2

41/2

––––––

31/2

41/2

––––––

EE Add Stroke

Add Stroke

111/411/4

19/16

22

11/16

7/87/8

111/4141/8161/4

31/4

41/845/8

25/16

215/16

29/16

211/16

215/16

215/16

215/16

215/16

215/16

215/16

23/4

27/8

31/8

31/8

31/8

31/8

31/8

31/8

31/8

27/8

31/8

31/8

31/8

31/8

31/8

31/8

31/8



Catalog SB0106-7



Head Square MountStyle ME38" - 12" Bore

Cap Square MountStyle ME48" - 12" Bore

24E TE

TETTSQ

3

E1

GWF

F J


ZB + STROKE

WEE

Y

K

MM

EB4 HOLES

2 4TE E

TE EB4 HOLES

3

E1

GXK + STROKE

FK

J


ZJ + STROKE

WEE

Y

MM








A AC





PA-2

A

NC

9R

od L

ock

75/16

715/16

79/16

711/16

715/16

715/16

715/16

715/16

715/16

715/16

815/16

91/16

95/16

95/16

95/16

95/16

95/16

95/16

95/16

99/16

913/16

913/16

913/16

913/16

913/16

913/16

913/16

Rod End Dimensions and Envelope Dimensions Affected By Rod Size

13/8

51/2

13/4

221/2

331/2

441/2

513/4

221/2

331/2

441/2

551/2

221/2

331/2

441/2

551/2

Bore E EB NPTF SAE F G J K TE LB P

81012



81/2105/8

123/4

3/43/43/4

221/4

21/4

11/2

22

9/16

11/16

11/16

3/4

11

57/871/875/8

7.579.40

11.10

31/4

41/845/8

11/16

13/16

13/16

Rod Style Style +.000 Dia. 4 & 5 2 & 3 -.002Bore MM LL KK A AC B C D NA TT V W WF Y XK ZB ZJ

Thread

8

10

12

47444

51/2

51/2

51/2

77444

51/2

51/2

51/2

77744

51/2

51/2

51/2

777

5/8

13/47/8

1111113/47/8

1111111

7/8

1111111

11/8

45/8

11/2

111/16

21/16

25/8

333/8

37/8

41/4

11/2

111/16

21/16

25/8

333/8

37/8

41/4

45/8

111/16

21/16

25/8

333/8

37/8

41/4

45/8

15/16

53/8

111/16

115/16

23/8

27/8

33/8

37/8

43/8

47/8

111/16

115/16

23/8

27/8

33/8

37/8

43/8

47/8

53/8

115/16

23/8

27/8

33/8

37/8

43/8

47/8

53/8

1.9996.2492.3742.6243.1243.7494.2494.7495.2495.7492.3742.6243.1243.7494.2494.7495.2495.7496.2492.6243.1243.7494.2494.7495.2495.7496.249

15/8

51/2

221/4

331/2

31/2

441/2

52

21/4

331/2

31/2

441/2

551/2

21/4

331/2

31/2

441/2

551/2

7/8

11/2

11/8

11/4

11/2

11/2

11/2

11/2

11/2

11/2

11/8

11/4

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/4

11/2

11/2

11/2

11/2

11/2

11/2

11/2

1/41/23/83/81/21/21/21/21/21/23/83/81/21/21/21/21/21/21/23/81/21/21/21/21/21/21/2

213/16

37/16

31/16

33/16

37/16

37/16

37/16

37/16

37/16

37/16

31/8

31/4

31/2

31/2

31/2

31/2

31/2

31/2

31/2

31/4

31/2

31/2

31/2

31/2

31/2

31/2

31/2

51/4

57/8

51/2

55/8

57/8

57/8

57/8

57/8

57/8

57/8

61/4

63/8

65/8

65/8

65/8

65/8

65/8

65/8

65/8

67/8

71/8

71/8

71/8

71/8

71/8

71/8

71/8

63/4

73/8

771/8

73/8

73/8

73/8

73/8

73/8

73/8

81/4

83/8

85/8

85/8

85/8

85/8

85/8

85/8

85/8

87/8

91/8

91/8

91/8

91/8

91/8

91/8

91/8

15/8

21/4

17/8

221/4

21/4

21/4

21/4

21/4

21/4

17/8

221/4

21/4

21/4

21/4

21/4

21/4

21/4

221/4

21/4

21/4

21/4

21/4

21/4

21/4

1-144-12

11/4-1211/2-1217/8-1221/4-1221/2-123-12

31/4-1231/2-1211/4-1211/2-1217/8-1221/4-1221/2-123-12

31/4-1231/2-124-12

11/2-1217/8-1221/4-1221/2-123-12

31/4-1231/2-124-12

11/4-1251/4-1211/2-1213/4-1221/4-1223/4-1231/4-1233/4-1241/4-1243/4-1211/2-1213/4-1221/4-1223/4-1231/4-1233/4-1241/4-1243/4-1251/4-1213/4-1221/4-1223/4-1231/4-1233/4-1241/4-1243/4-1251/4-12

21/2

–3

31/2

41/2

–––––3

31/2

41/2

––––––

31/2

41/2

––––––

Add Stroke

#12#16#16

EE

Add Stroke



Catalog SB0106-7



Cap Trunnion MountStyle MT28" - 12" Bore

Head Trunnion MountStyle MT18" - 12" Bore

Intermediate Fixed Trunnion MountModel MT48" - 12" Bore

24E TD

E TLTLTTSQ

3

UT1

XGF J


ZB + STROKE

WEE

Y

K

MM

G

R18

24E TD

E TLTLTTSQ

3

UT1

XJ + STROKEF


ZB + STROKE

WEE

Y

K

MM

G J

R18

2

R18

4E UV TD

ETTSQ

TMTL TL

3

UM1

G

XI**

F J


ZB + STROKE

WEE

Y

BD

K

MM









A AC

Trunnion Mountings – 8" to 12" Bore




PA-2

A

NC

9R

od L

ock

13/8

51/2

13/4

221/2

331/2

441/2

513/4

221/2

331/2

441/2

551/2

221/2

331/2

441/2

551/2

213/16

37/16

31/16

33/16

37/16

37/16

37/16

37/16

37/16

37/16

31/8

31/4

31/2

31/2

31/2

31/2

31/2

31/2

31/2

31/4

31/2

31/2

31/2

31/2

31/2

31/2

31/2

121/2

151/2171/2

+.000 TDBore BD E NPTF SAE F G J K -.001 TL TM UT UM UV LB P 8

1012

3/4

11

81/2

105/8

123/4

3/43/43/4

221/4

21/4

11/2

22

9/16

11/16

11/16

21/2

33


Rod Style Style +.000 Dia. 4 & 5 2 & 3 -.002 XI*Bore MM LL KK A AC B C D NA TT V W XG (Min.) Y XJ ZB


8

10

12

47444

51/2

51/2

51/2

77444

51/2

51/2

51/2

77744

51/2

51/2

51/2

777

5/8

13/47/8

1111113/47/8

1111111

7/8

1111111

11/8

45/8

11/2

111/16

21/16

25/8

333/8

37/8

41/4

11/2

111/16

21/16

25/8

333/8

37/8

41/4

45/8

111/16

21/16

25/8

333/8

37/8

41/4

45/8

15/16

53/8

111/16

115/16

23/8

27/8

33/8

37/8

43/8

47/8

111/16

115/16

23/8

27/8

33/8

37/8

43/8

47/8

53/8

115/16

23/8

27/8

33/8

37/8

43/8

47/8

53/8

1.9996.2492.3742.6243.1243.7494.2494.7495.2495.7492.3742.6243.1243.7494.2494.7495.2495.7496.2492.6243.1243.7494.2494.7495.2495.7496.249

15/8

51/2

221/4

331/2

31/2

441/2

52

21/4

331/2

31/2

441/2

551/2

21/4

331/2

31/2

441/2

551/2

7/8

11/2

11/8

11/4

11/2

11/2

11/2

11/2

11/2

11/2

11/8

11/4

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/4

11/2

11/2

11/2

11/2

11/2

11/2

11/2

1/41/23/83/81/21/21/21/21/21/23/83/81/21/21/21/21/21/21/23/81/21/21/21/21/21/21/2

75/16

715/16

79/16

711/16

715/16

715/16

715/16

715/16

715/16

715/16

815/16

91/16

95/16

95/16

95/16

95/16

95/16

95/16

95/16

99/16

913/16

913/16

913/16

913/16

913/16

913/16

913/16

1-144-12

11/4-1211/2-1217/8-1221/4-1221/2-123-12

31/4-1231/2-1211/4-1211/2-1217/8-1221/4-1221/2-123-12

31/4-1231/2-124-12

11/2-1217/8-1221/4-1221/2-123-12

31/4-1231/2-124-12

11/4-1251/4-1211/2-1213/4-1221/4-1223/4-1231/4-1233/4-1241/4-1243/4-1211/2-1213/4-1221/4-1223/4-1231/4-1233/4-1241/4-1243/4-1251/4-1213/4-1221/4-1223/4-1231/4-1233/4-1241/4-1243/4-1251/4-12


665/8

61/4

63/8

65/8

65/8

65/8

65/8

65/8

65/8

71/4

73/8

75/8

75/8

75/8

75/8

75/8

75/8

75/8

77/8

81/8

81/8

81/8

81/8

81/8

81/8

81/8

415/16

59/16

53/16

55/16

59/16

53/16

59/16

59/16

59/16

59/16

511/16

513/16

61/16

61/16

61/16

61/16

61/16

61/16

61/16

513/16

61/16

61/16

61/16

61/16

61/16

61/16

61/16

25/8

31/4

27/8

331/4

31/4

31/4

31/4

31/4

31/4

331/8

33/8

33/8

33/8

33/8

33/8

33/8

33/8

31/8

33/8

33/8

33/8

33/8

33/8

33/8

33/8

91/2

113/4133/4

1.3751.7501.750

13/813/4

13/4

93/4

1214

31/441/845/8

57/871/875/8

111/4

141/8161/4

* Dimension XI to be specified by customer.

#12#16#16

21/2

–3

31/2

41/2

–––––3

31/2

41/2

––––––

31/2

41/2

––––––

EE Add Stroke

Add Stroke

Trunnion Mountings – 8" to 12" Bore


Catalog SB0106-7



24E R

R

AA

TTSQ

3

E1

GWF

BB

F J


ZB + STROKE

WEE

Y

K

MM

DD

Cap Fixed Clevis MountStyle MP18" - 12" Bore

Tie Rod Extended MountStyle MX38" - 12" Bore

Model MX3 Head Tie Rods Extended, Illustrated. Model MX2 Cap Tie Rods Extended; and Model MX1, Both Ends Tie Rods Extended are also available. All Tie Rod Models can be dimensioned from Model MX3 drawing at right.

Models MX3 and MX1 not offered in 8" bore, rod diameters 4 1/2", 5" and 5 1/2".

E

3

E

1

XC + STROKEF


ZC + STROKE

WEE

Y

K

MM

CB

2

CW CWJ L MG

4

PIVOT PIN

CD

LR

MR








A AC





PA-2

A

NC

9R

od L

ock

13/8

51/2

13/4

221/2

331/2

441/2

513/4

221/2

331/2

441/2

551/2

221/2

331/2

441/2

551/2

213/16

37/16

31/16

33/16

37/16

37/16

37/16

37/16

37/16

37/16

31/8

31/4

31/2

31/2

31/2

31/2

31/2

31/2

31/2

31/4

31/2

31/2

31/2

31/2

31/2

31/2

31/2

+.000 CD Bore AA BB CB -.001 CW DD E NPTF SAE F G J K L LR M MR R LB P

9.111.213.3

25/16

211/16

211/16

6.447.929.40

81012


Rod Style Style +.000 Dia. 4 & 5 2 & 3 -.002Bore MM LL KK A AC B C D NA TT V W WF Y ZB XC ZC


8

10

12

47444

51/2

51/2

51/2

77444

51/2

51/2

51/2

77744

51/2

51/2

51/2

777

5/8

13/47/8

1111113/47/8

1111111

7/8

1111111

11/8

45/8

11/2

111/16

21/16

25/8

333/8

37/8

41/4

11/2

111/16

21/16

25/8

333/8

37/8

41/4

45/8

111/16

21/16

25/8

333/8

37/8

41/4

45/8

15/16

53/8

111/16

115/16

23/8

27/8

33/8

37/8

43/8

47/8

111/16

115/16

23/8

27/8

33/8

37/8

43/8

47/8

53/8

115/16

23/8

27/8

33/8

37/8

43/8

47/8

53/8

1.9996.2492.3742.6243.1243.7494.2494.7495.2495.7492.3742.6243.1243.7494.2494.7495.2495.7496.2492.6243.1243.7494.2494.7495.2495.7496.249

15/8

51/2

221/4

331/2

31/2

441/2

52

21/4

331/2

31/2

441/2

551/2

21/4

331/2

31/2

441/2

551/2

7/8

11/2

11/8

11/4

11/2

11/2

11/2

11/2

11/2

11/2

11/8

11/4

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/4

11/2

11/2

11/2

11/2

11/2

11/2

11/2

1/41/23/83/81/21/21/21/21/21/23/83/81/21/21/21/21/21/21/23/81/21/21/21/21/21/21/2

81/4

87/8

81/2

85/8

87/8

87/8

87/8

87/8

87/8

87/8

103/8

101/2

103/4

103/4

103/4

103/4

103/4

103/4

103/4

111/8

113/8

113/8

113/8

113/8

113/8

113/8

113/8

91/4

97/8

91/2

95/8

97/8

97/8

97/8

97/8

97/8

97/8

113/4

117/8

121/8

121/8

121/8

121/8

121/8

121/8

121/8

127/8

131/8

131/8

131/8

131/8

131/8

131/8

131/8

75/16

715/16

79/16

711/16

715/16

715/16

715/16

715/16

715/16

715/16

815/16

91/16

95/16

95/16

95/16

95/16

95/16

95/16

95/16

99/16

913/16

913/16

913/16

913/16

913/16

913/16

913/16

1-144-12

11/4-1211/2-1217/8-1221/4-1221/2-123-12

31/4-1231/2-1211/4-1211/2-1217/8-1221/4-1221/2-123-12

31/4-1231/2-124-12

11/2-1217/8-1221/4-1221/2-123-12

31/4-1231/2-124-12

11/4-1251/4-1211/2-1213/4-1221/4-1223/4-1231/4-1233/4-1241/4-1243/4-1211/2-1213/4-1221/4-1223/4-1231/4-1233/4-1241/4-1243/4-1251/4-1213/4-1221/4-1223/4-1231/4-1233/4-1241/4-1243/4-1251/4-12


15/8

21/4

17/8

221/4

21/4

21/4

21/4

21/4

21/4

17/8

221/4

21/4

21/4

21/4

21/4

21/4

21/4

221/4

21/4

21/4

21/4

21/4

21/4

21/4

11/2

221/2

1.0001.3751.750

3/4

111/4

5/8-183/4-163/4-16

81/2

105/8

123/4

3/4

11

3/43/43/4

221/4

21/4

11/2

22

9/16

11/16

11/16

11/2

21/8

21/4

57/871/875/8

11/4

17/821/8

113/813/4

13/16

15/8

21/8

31/4

41/845/8

#12#16#16

EE Add Stroke

Add Stroke


21/2

–3

31/2

41/2

–––––3

31/2

41/2

––––––

31/2

41/2

––––––


Catalog SB0106-7



Spherical Bearing Mount – Style MPU3 1 1/2" to 6" Bore Sizes

LUBRICATIONFITTING

CD

MA

AKK

W


NR

MS

4

EX3

2

1

61/8

61/2

61/8

63/4

61/2

61/4

71/8

65/8

67/8

77/8

81/2

81/8

83/8

77/8

83/4

81/8

83/8

81/2

81/8

983/8

85/8

83/4

99

93/8

1095/8

93/4

101010

Spherical Bearing Mount – 11/2" to 6" Bore


3/43/43/43/43/43/43/43/43/4

11/8

11/8

11/8

11/8

11/8

11/8

11/8

11/8

11/8

11/8

11/8

11/8

11/8

11/8

11/8

11/8

15/8

15/8

15/8

15/8

15/8

15/8

15/8

—

7/16-20—

7/16-207/16-20

—

7/16-207/16-207/16-20

—

3/4-163/4-163/4-16

—

3/4-163/4-163/4-163/4-16

—

3/4-163/4-163/4-163/4-163/4-163/4-16

—

1-141-141-141-141-141-14

-.0005.5000

-.0005.5000

-.0005.5000

-.0005.7500

-.0005.7500

-.0005.7500

-.00051.0000

7/16-20**

7/16-20****

7/16-20******

3/4-16******

3/4-16********

3/4-16************

1-14************

Thread

11/2

2

21/2

31/4

4

5

6

5/8

15/8

13/8

15/8

13/4

113/8

12

13/8

13/4

121/2

13/8

13/4

21

31/2

13/8

13/4

221/2

313/8

413/4

221/2

331/2

Add Stroke

3/4

3/4

3/4

1

1

1

11/4

5/8

5/8

5/8

1

1

1

11/4

250

250

250

250

250

250

250

Max. Oper. PSI1 PA-2

15/16

15/16

15/16

13/8

13/8

13/8

111/16


2 Dimension CD is hole diameter.3 Threads listed are also for a spherical rod eye which match style 9 or style 7.

The spherical rod eye pin diameter matches the cap pin and (if required) needs to be purchased separately; see NC-9 mounting accessories for detailed information.

5/8

15/8

11/4

15/8

11/2

111/43/4

13/8

111/43/4

15/8

111/4

13/83/4

15/8

111/4

13/8

15/8

15/87/8

11/2

11/8

11/4

11/2

11/2

11/2

53/8

53/4

53/8

653/4

51/2

63/8

57/8

61/8

67/8

71/2

71/8

73/8

67/8

73/4

71/8

73/8

71/2

71/8

873/8

75/8

73/4

88

81/8

83/4

83/8

81/2

83/4

83/4

83/4

7/16

7/16

7/16

21/32

21/32

21/32

7/8




PA-2

A

NC

9R

od L

ock

11/4

15/8

21/16

250

250

250

-.00051.0000

-.00051.3750

-.00051.7500


15/8

15/8

15/8

15/8

15/8

15/8

15/8

15/8

15/8

15/8

222222222

21/4

21/4

21/4

21/4

21/4

21/4

21/4

21/4

81/4

87/8

81/2

85/8

87/8

87/8

87/8

87/8

87/8

87/8

103/8

101/2

103/4

103/4

103/4

103/4

103/4

103/4

103/4

111/8

113/8

113/8

113/8

113/8

113/8

113/8

113/8

–1-141-141-141-141-141-141-141-141-14

–11/4-1211/4-1211/4-1211/4-1211/4-1211/4-1211/4-1211/4-12

–11/2-1211/2-1211/2-1211/2-1211/2-1211/2-1211/2-12

91/2

101/8

93/4

97/8

101/8

101/8

101/8

101/8

101/8

101/8

121/4

123/8

125/8

125/8

125/8

125/8

125/8

125/8

125/8

135/8

137/8

137/8

137/8

137/8

137/8

137/8

137/8

1-14******************

11/4-12****************

11/2-12**************

Thread

13/8

51/2

13/4

221/2

331/2

441/2

513/4

221/2

331/2

441/2

551/2

221/2

331/2

441/2

551/2

7/8

11/2

11/8

11/4

11/2

11/2

11/2

11/2

11/2

11/2

11/8

11/4

11/2

11/2

11/2

11/2

11/2

11/2

11/2

11/4

11/2

11/2

11/2

11/2

11/2

11/2

11/2

Add Stroke

111/16

27/16

27/8

7/8

13/16

117/32

11/4

17/8

21/2

Max.Oper.PSI

LUBRICATIONFITTING

CD

MA

AKK

W


NR

MS

4

EX3

2

1

Spherical Bearing Mount – 8" to 12" Bore

Spherical Bearing Mount – Style MPU3 8" to 12" Bore Sizes

8

10

12


2 Dimension CD is hole diameter.3 Threads listed are also for a spherical rod eye which match style 9 or style 7.

The spherical rod eye pin diameter matches the cap pin and (if required) needs to be purchased separately; see NC-9 mounting accessories for detailed information.


Catalog SB0106-7



CL

CD

Bore Sizes Series NC-9 11/2, 2 & 21/2 31/4, 4 & 5 6 & 8 10 12 Part No. 0839470000 0839480000 0839490000 0839500000 0839510000

CDCFCWDDEF

FLLRM

MRR

LOADCAPACITY

LBS.

1/27/16

1/213/32

31/2

11/215/16

1/25/8

2.05

3/421/32

5/817/32

33/45/82

13/87/81

2.76

17/83/4

17/32

51/23/4

21/2111/16

113/16

4.10

13/813/16

121/32

61/27/8

31/2 27/16

13/815/84.95

13/4117/32

11/429/32

81/211/441/227/813/421/16

6.58

9450 14300 20322 378005770

CDCL

LOADCAPACITY

LBS.

Bore Sizes Series NC-9 11/2, 2 & 21/2 31/4, 4 & 5 6 & 8 10 12Pivot Pin Part No. 0839620000 0839630000 0839640000 0839650000 0839660000

.4997- .0004

19/16

.7497- .0005

21/32

.9997- .0005

21/21.3746- .0006

35/16

1.7496- .0006

47/32

19300 34300 65000 1052008600

.5000- .0005

11/16

7/87/16

13/16

3/47/16-20

7/8

.7500- .0005

111/421/32

11/811/16

3/4-16 15/16

1.0000- .0005

11/217/87/8

11/417/16

1-14 11/2

1.3750- .0005

221/813/16

111/16

17/811/4-12

2

1.7500- .0005

21/821/2

117/32

21/16

21/811/2-12

21/4

CDA

CEEXERLEJKJL

LOADCAPACITY

LBS.2644 9441 16860 28562 43005

Schrader Bellows offers a complete range of Cylinder Accessories to assure you of the greatest versatility in present or future cylinder applications. Accessories offered for the respective cylinder include the Rod Eye, Pivot Pin

and Clevis Bracket. To select the proper part number for any desired accessory refer to the charts below.

Clevis Bracket

Pivot Pin

Pivot Pins are furnished with (2) Retainer Rings.

Clevis Bracket

Order to fit Cap or Rod Eye.

MR

LR

RE

DD DIA4 HOLES

F

M

FL

CW CWCF

+ .004+ .002

RE

CD

Bore Sizes Series NC-9 11/2, 2 & 21/2 31/4, 4 & 5 6 & 8 10 12Rod Eye Part No. 1322900000 1322910000 1322920000 1322930000 1322940000 Spherical Rod Eye

Order to fit Piston Rod Thread Size.

LE

CD

JKTHD

ER (MAX)

LUBEFITTING

CE

A

EX

JL DIA





PA-2

A

NC

9R

od L

ock

Add Stroke

To determine dimensions for a double rod cylinder, first refer to the desired single rod mounting style cylinder shown on preceding pages of this catalog. After select-ing necessary dimensions from that drawing, return to this page and supplement the single rod dimen-sions with those shown on the drawing and dimension table below. Note that double rod cylinders have a head (Dim. G) at both ends and that dimension LD or LF replaces LG or LB. The double rod dimen-sions differ from, or are in addition to those for single rod cylinders shown on preceding pages and provide the information needed to completely dimension a double rod cylinder. On a double rod cylinder where the two rod ends are differ-ent, be sure to clearly state which rod end is to be assembled at which end.Port position 1 is standard. If other than standard, specify position 2, 3, or 4 when viewed from one end only.If only one end of these Double Rod Cylinders is to be cushioned, be sure to specify clearly which end this will be.

Rod Dia. Bore MM LD LF SS ZM

33/8

33/8

31/2

33/4

33/4

35/8

41/8

41/4

47/8

53/8

SS

MS2

11/2

221/2

31/4

45681012

Add 2X Stroke

61/8

61/8

61/4

71/2

71/2

73/4

83/4

87/8

103/8

111/8

—

All Mtgs.

41/8

41/8

41/4

43/4

43/4

551/2

55/8

65/8

71/8

LGReplaces:On single rod

mounting styles: All Mtg. Styles

5/85/85/8

111

13/8

13/8

13/4

2

47/8

47/8

566

61/4

771/8

81/8

85/8

LB

All dimensions are in inches and apply to standard rod sizes only. For alternate rod sizes, determine all envelope dimensions (within LD dim.) as described above and then use appropriate rod end dimensions for proper rod size from single rod cylinder.

How to Use Double Rod Cylinder Dimension Drawings

G F K

G F

P + STROKE LD + STROKE

ZM + 2 X STROKE

W

EE

Y

MM

V A C

NA

B

W + STROKE

2 4 E R

R3

E

AA

1

1-1/2" to 6" BoresTie Rod Retained Cartridge


G

G K

P + STROKELF + STROKE

ZM + 2 X STROKE

WF

EE

Y

MM

VAA C

NA

B

WF + STROKE

2

BF

3E R

R

4

E

AA

1

1-1/2" to 6" BoresRemovable Cartridge


MDS2MDX1MDX3

MDT4

MDF1

MDF5

F


ZM + 2 X STROKE

WEE

Y

K

MM

G F

GWF

8" to 12" Bores


Double Rod Models – 1 1/2" to 12" Bore

Specify XI dimension from rod end #1.


Catalog SB0106-7



Alignment Coupler See Table 1 for Part Numbers and Dimensions

Table 1 — Part Numbers and Dimensions

Part No.1347570031

1347570038

1347570044

1347570050

1347570063

1347570075

1347570088

1347570100

1347570125

1337390125

1337390150

1337390175

1337390188

A5/16-243/8-24

7/16-201/2-205/8-183/4-167/8-14

1-14

11/4-12

11/4-12

11/2-12

13/4-12

17/8-12

B11/8

11/8

13/8

13/8

13/8

2

2

3

3

31/2

4

4

5

C13/4

13/4

2

2

2

25/16

25/16

3

3

4

43/8

43/8

55/8

D15/16

15/16

11/8

11/8

11/8

15/8

15/8

2 3/8

2 3/8

2

21/4

21/4

3

E1/21/23/43/43/4

11/8

11/8

15/8

15/8

2

21/4

21/4

3

F1/21/25/85/85/8

15/16

15/16

17/16

17/16

11/2

13/4

13/4

21/4

G3/83/81/21/21/23/43/4

11/4

11/4

11/4

11/2

11/2

115/16

H3/43/47/87/87/8

15/16

15/16

17/8

17/8

111/16

115/16

115/16

25/8

J3/83/83/83/83/8

7/16

7/16

3/43/43/47/87/8

13/8

K15/16

15/16

13/32

13/32

13/32

19/32

19/32

125/32

125/32

21/2

23/4

23/4

33/8

Max.PullLoad(lbs.)1200

2425

3250

4450

6800

9050

14450

19425

30500

30500

45750

58350

67550

Approx.Weight(lbs.).35

.35

.55

.55

.55

1.4

1.4

4.8

4.8

6.9

9.8

9.8

19.8

How to Order Linear Alignment Couplers — When ordering a cylinder with a threaded male rod end, specify the coupler of equal thread size by part number as listed in Table 1, i.e.; Piston Rod “KK” or “LL” dimension is 3/4" - 16", specify coupler part number 1347570075.

Alignment Coupler




PA-2

A

NC

9R

od L

ock

LR9/16

15/16

1

2

23/4

33/16

ThreadSizeLL

7/8-14

11/4-12

11/2-12

13/4-12

21/4-12

Rod Dia.

1

13/8

13/4

2

21/2

R1.62

2.56

3.25

3.82

4.95

5.73

LR21/32

11/8

11/16

15/8

17/8

21/8

CB11/4

2

21/2

21/2

21/2

CD3/4

13/8

13/4

13/4

2

Dimensions in Inches


SchraderBellows

P/N031940500

031940750

031941000

069208000

069209000

069210000

ThreadSizeLL

7/8-14

11/4-12

11/2-12

13/4-12

21/4-12

A11/8

2

21/4

21/4

3

CB11/4

2

21/2

21/2

21/2

CD3/4

13/8

13/4

13/4

2

CE23/8

41/8

41/2

41/2

51/2

CW5/8

1

11/4

11/4

11/4

CD13/4

11/4

13/4

13/4

2

SchraderPart

Number

031970875

031971250

031971500

031971750

031977987

Rod Clevis — Order to Fit Thread Size of Piston Rod*NC9Part

Number

NC9-3402A

NC9-3404

NC9-3405

NC9-3405A

NC9-3406A

A11/8

2

2 1/4

2 1/4

3

CA21/16

37/16

4

4

5

CJ3/4

—

—

—

—

CD13/4

13/8

13/4

13/4

2

SchraderPart

Number

031960875

031961250

031961500

031961750

031977999

Rod Eye — Order to Fit Thread Size of Piston Rod*NC9Part

Number

NC9-3305A

NC9-3307

NC9-3308

NC9-3308A

NC9-3309A

Rod Dia.

1

13/8

13/4

2

21/2

CB3/4

11/4

11/2

2

21/2

21/2

AA2.3

3.6

4.6

5.4

7

8.1

DD13/32

17/32

21/32

21/32

15/16

11/16

E SQ.21/2

31/2

41/2

5

61/2

71/2

F3/85/83/47/87/8

1

FL11/8

17/8

21/4

3

31/8

31/2

Eye Bracket — Order to Fit Pivot Pin Size (CD)*

NC9Part

NumberNC9-3201

NC9-3202

NC9-3203

NC9-3210

NC9-3212

NC9-3213

CD1/2

3/4

1

13/8

13/4

2

MR1/23/4

1

13/8

13/4

2

SchraderBellows

P/N0691950000

0691960000

031951000

0691980000

0691990000

031952000

CD1/23/4

1

13/8

13/4

2

CW1/25/83/4

1

11/4

11/2

DD13/32

17/32

21/32

21/32

29/32

11/16

E3

41/2

5

71/2

91/2

12 3/4

F3/85/83/47/87/8

1

FL11/8

17/8

21/4

3

35/8

41/4

Clevis Bracket for Rod Eye — Order to Fit Pivot Pin Size (CD)*

NC9Part

NumberNC9-3204

NC9-3205

NC9-3206

NC9-3207

NC9-3208

NC9-3209

CB3/4

11/4

11/2

2

21/2

21/2

M1/23/4

1

13/8

13/4

21/4

MR1/23/4

13/16

121/32

2 7/32

2 25/32

R2.05

3.25

3.82

5.73

7.50

9.40



CR11/2

—

—

—

—

øC

D

øCR

CD

CB

CD

CA

CJ A

CD

CD1

LL

CD CB

CW

CW

LL

A

CD

CE

CD

CD1

øC

D

ø CD E

E

CB

RFL

F

AA

M

LR

MR

DD

25˚

MR

FL

LRR R

E E

F

M

CB

CWCW

ø DD4 HOLES

øC

D25˚

* Accessories listed on this page will attach current Ford specification rod thread and bore sizes. For sizes outside the current for specification see page 40 of Section A.

Accessories


Catalog SB0106-7



CDCL

SchraderBellows

Numbers s

190208003

190408003

190508003

190708003

190808003

191008003

191108003

191308003

191408003

191508003

D31/64

35/64

27/32

31/32

11/8

CL17/8

25/8

31/8

41/8

53/16

53/16

SchraderBellows

P/N0683680000

0683690000

0683700000

0683710000

0683720000

0683730000

Pivot Pins with Retaining Rings

FordPart

NumberNC9-3310

NC9-3311

NC9-3312

NC9-3313

NC9-3314

NC9-3315

CD1/23/4

1

13/8

13/4

2

Dimensionsin inches

B15/16

17/8

21/4

25/8

31/8

SchraderBellows

P/N034451017

034451023

034451027

034451030

034451033

Jam Nut

FordPart

NumberN/A

N/A

N/A

N/A

N/A

Thd. A7/8-14

11/4-12

11/2-12

13/4-12

21/4-12

Dimensions in inches

C115/32

21/8

217/32

215/16

3 5/8

Cylinder KitsFor current Ford specification cylinders

Pivot Pins and Jam NutsSizes to fit current Ford specification cylinders

Bore11/2

2

21/2

31/4

4

5

6

8

10

12

CylinderSealKits

NC9-4201

NC9-4202

NC9-4203

NC9-4204

NC9-4205

NC9-4206

NC9-4207

NC9-4208

NC9-4209

NC9-4210 s Contain Items 1 through 3s s Contain Items 1 through 3 & Retaining Ring, Cushion Insert and Cushion Adj. Seal

SchraderBellowsNumber

190208014

190518014

190218014

190718014

190428014

191118014

190538014

191418014

190738014

191518014

190848014

Bore11/2, 2

21/2

11/2, 2, 21/2

31/4, 4, 5

31/4, 4, 5

2, 5, 6, 8

21/2, 6, 8

31/4, 4, 5, 10

31/4, 4, 5, 10

6, 8

4, 8, 10, 12

CartridgeAssemblyNC9-4001

NC9-4002

NC9-4003

NC9-4004

NC9-4005

NC9-4006

–

NC9-4007

–

NC9-4008

NC9-4009

Rod5/85/8

1

1

13/8

13/8

13/4

13/4

2

2

21/2

Cartridge Assembly Contains:1 (ea.) #1 Rod Cartridge1 (ea.) #2 Rod Wiper1 (ea.) #3 Rod Seal1 (ea.) #4 Rod Cartridge Seal

CUSH. ADJ.SCREW

12

3

1 2 3 4

A THREAD

D B

C

Cylinder Seal Kits Contain:2 (ea.) #1 Tube Seals2 (ea.) #2 Piston Seals1 (ea.) #3 Wear Ring

1. Pivot Pins are furnished with Clevis Mounted Cylinders as standard.2. Pivot Pins are furnished with (2) retaining rings.3. Pivot Pins must be ordered as a separate item if to be used with Knuckles Rod Clevises or Clevis Brackets.

Pivot Pin

Jam Nut

Cartridge Assembly

Accessories/Cylinder Kits




PA-2

A

NC

9R

od L

ock

Mounting Styles and Ordering Notes

Rod Dia.5/81

5/8 1

13/8 5/8 1

13/8 13/41

13/8 13/4, 21, 13/8 13/4, 221/21, 2

21/2, 331/2

13/8 - 21/23 - 4

13/8 - 41/25, 51/2

13/4 - 51/22 - 51/2

Bore

11/2

2

21/2

31/4

4

5

6

8*

10*12*

In line with our policy of continuing product improvement, specifications in this catalog are subject to change.

Available in all bore and rod combinations in the following mounting styles: MDS2, MDS4, MDX1, MDX3, MDT1, MDT4, and MDF1 (1"-6"). MDF5 (1"-6") and MDE3 (8"-12").

Double End Construction

Side Lug

MS2

Head Rectangular Flange

MF1

Cap Rectangular Flange

MF2

Head Square Flange

MF5

Cap Square Flange

MF6

Side Tap

MS4

Tie Rods Extended Trunnion Mounts

Cap Fixed Clevis

MP1

Pivot Pin Included

Spherical Bearing

MPU3

Head MT1Cap MT2Intermediate Fixed MT4

Both Ends MX1Cap End MX2Head End MX3

Available in all bore and rod combinations.Available in all bore and rod combinations through 6" bore. 8"-12" bores

supplied as Head Square (ME3) and Cap Square (ME4) mounts.

MX1 MX3 MX2 MS4 MS2 MF6 MF2 MT2 MT1

MT4 MPU3 MP1

RTRRTRRTTRRRRRRRRTRTRRRR

MF1MF5

TTRTTRRTTRRTRRTRTTRT

N/AN/AN/AN/A

ME3ME4

N/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/ARRRR

Rod BearingCartridges

R = Removable CartridgeT = Tie Rod Retained Cartridge

*MF5, MF6, MF1, MF2 not available in these bore sizes.

ME3 and ME4 available in 8-12" bore only.

Head Square Cap Square

ME4ME3

Mounting Styles/Order Notes


Catalog SB0106-7



Bore Rod Model No. Size Dia. Code 8" 13/8" J12 13/4" J13 2" J14 21/2" J15 3" J16 31/2" J17 4" J18 41/2" J19 5" J41 51/2" J42 10" 13/4" K13 2" K14 21/2" K15 3" K16 31/2" K17 4" K18 41/2" K19 5" K41 51/2" K42 12" 2 L14 21/2" L15 3" L16 31/2" L17 4" L18 41/2" L19 5" L41 51/2" L42

2 Bore Rod Model No. Size Dia. Code 11/2" 5/8" A10 1" A11 2" 5/8" B10 1" B11 13/8" B12 21/2" 5/8" C10 1" C11 13/8" C12 13/4" C13 31/4" 1" D11 13/8" D12 13/4" D13 2" D14 4" 1" E11 13/8" E12 13/4" E13 2" E14 21/2" E15 5" 1" F11 13/8" F12 13/4" F13 2" F14 21/2" F15 3" F16 31/2" F17 6" 13/8" G12 13/4" G13 2" G14 21/2" G15 3" G16 31/2" G17 4" G18

How To Order By Model Number

NC-9 Pneumatic Cylinders can be specified by model number by using the tables shown at right. SelectionsinboldtypeindicatecurrentFordstandard.

1. Type Select the Model Number Code which identifies single, double end.





6. Stroke Length It is necessary to specify the stroke length desired following the Model Number. For example: FAA110851 with 6" stroke.


The Example Would Identify: A single end pneumatic cylinder, 1-1/2" bore size, 1" piston rod diameter, side lug mount, cushioned both ends, with automotive male rod thread, Buna N Seals, and a 6" stroke.


1 Model NumberType Pneumatic Steel TubeSingleEndwithNPTport FADoubleEndwithNPTport FBSingle End with SAE port NADouble End with SAE port NB

3 Model Number Code NFPA Non- Cush. Cush. Cush.Mounting Style Style Cush. Head Cap BothSideLug MS2 05 06 07 08Side Tap MS4 13 14 15 16HeadRectangularFlange(11/2-6) MF1 21 22 23 24CapRectangularFlange(11/2-6) MF2 25 26 27 28Head Square Flange (11/2-6) MF5 29 30 31 32Cap Square Flange (11/2-6) MF6 33 34 35 36HeadSquare(8-14) ME3 37 38 39 40CapSquare(8-14) ME4 41 42 43 44TieRodsExtendedBothEnds MX1 53 54 55 56TieRodsExtendedCapEnd MX2 57 58 59 60TieRodsExtendedHeadEnd MX3 61 62 63 64Head Trunnion MT1 69 70 71 72Cap Trunnion MT2 73 74 75 76IntermediateFixedTrunnion MT4 77 78 79 80CapFixedClevis MP1 81 82 83 84Spherical Bearing MPU3 89 90 91 92NO MOUNT MX0 93 94 95 96

4 Rod End Style Model Number Code Small Male 2 Short Female 3 Intermediate Male 4 AutomotiveMale 5 Special Specify 0

5 Seal Type Model Number Code BunaNSeals 1 Fluorocarbon Seals 2

6 Special Features S

Model NumberExample:FA A11 08 5 1 S W/6"Stroke


Schrader Bellows Order Code



PA-2

A

NC

9R

od L

ock

ContentsFeatures .............................................................................90Mounting Styles / Standard Specifications .........................91How to Select / Push & Pull Forces ....................................92Rod Lock Connection / Specifications ................................93Weight of Cylinder with Rod Lock.......................................94Mounting Information ...................................................95-105 Double Rod End Models...................................................106

“Style 6” Piston Rod End ....................................................44Cylinder Accessories NC9 .....................................................................82, 84-86 PA-2 ....................................................................38, 40-43How to Order ....................................................................108 NC9 ..............................................................................109 PA-2 .............................................................................110

Rod Lock For NC9 & PA-2 SeriesPneumatic Cylinders

Pneumatic CylindersNC9 & PA-2 Series with Rod Lock

Catalog SB0106-7



Rod Lock Features• True Bolt-on Modularity – the cylinder is built and tested as a stand

alone unit. The Rod Lock is then assembled and tested at rated holding force.

• Large Rod Lock Clamping Surface – provides uniform force to the rod contact area. This allows holding forces to resist 100 psi input on the cylinder cap end for most bore and rod combinations.

• Spring-engaged, air-released operation – ensures positive holding in power-off situations with minimal air volume required for release.

• Manual release is standard – cam operated release disengages the Rod Lock with a simple turn of a hex bolt. The default-to-lock function springs back to the engaged position when released.

• Rod Lock is sealed to withstand harsh environments – NEMA 4X rating protects internal components from contamination

Manual override shaft allows release of the Rod Lock independent of pneumatic controls. The override is spring loaded and engages the rod lock when the wrench is removed and the air signal is absent.

Air port for Rod Lock release.

Breather port.

Piston rod extension and Rod Lock pilot conform to NFPA dimensions. Fluorocarbon rod wiper cleans

rod on retract stroke and excludes contamination from the Rod Lock.

Light weight aluminum Rod Lock body is anodized for corrosion protection.

NC9 or PA-2 Series heavy-duty pneumatic cylinder.

Benefits of using a piston Rod Lock include:• Prevents rod movement upon release of stored energy• Eliminates the need for pilot operated check valves for load holding• Eliminates complicated piping between pilot operated check valves and the cylinder

Features, Benefits, Value

Catalog SB0106-7 Pneumatic CylindersNC9 & PA-2 Series with Rod Lock



PA-2

A

NC

9R

od L

ock

NC9, PA-2 Series with Rod Lock Mounting Styles

No Mount

MX0

Tie Rods Extended Head End

MX3

Tie Rods Extended Cap End

MX2

Tie Rods Extended

Both Ends

MX1

Head Rectangular

Flange

MF1

Cap Rectangular

Flange

MF2

Side Lug

MS2

Side Tap

MS4

Cap Fixed Clevis

MP1

Spherical Bearing

MPU3

Head Trunnion

MT1

Cap Trunnion

MT2

Intermediate Trunnion

MT4

Standard Specifications• 13 Standard mounting styles• Bore sizes – 11/2" to 8"• Strokes – up to 120"• Piston Rod Diameters – 5/8" to 21/2"

• Working pressure up to 100 psi• Single and double rod construction available• Temperature range – -10°F (-23°C) to +165°F (+74°C) (depending on seal class)

Seal Types1 – Standard Nitrile Seals2 – Optional (At extra cost) Fluorocarbon Seals

Typical FluidsDry 50 filtered air

Dry 50 filtered air

Temperature Range-10°F (-23°C) to +165°F (+74°C)

-10°F (-23°C) to +165°F (+74°C)

Note: Type 2 seals do not increase temperature resistance of the cylinder and rock lock assembly. Specify Type 2 seals for chemical compatibility.

Mounting Styles / Standard Specifications


Catalog SB0106-7



How to Select / Push & Pull Forces

How to Select a NC9 or PA-2 Series CylinderStep 1 – Determine the correct cylinder bore size necessary to achieve required push or pull force

using the available operating pressure (up to 100 psi). Follow steps in Theoretical Push and Pull Forces below.

Step 2 – Select the mounting style that fits your installation needs. Determine the bore and rod sizes available for the required mounting style and complete the model selection.

Step 3 – Choose a rod end style and the desired rod end accessories.

Theoretical Push and Pull ForcesThe cylinder output forces are derived from this formula: F = P x A

Where F = Force in pounds. P = Pressure at the cylinder in pounds per square inch. A = Effective area of cylinder piston in square inches.

To determine the bore size for the application, follow the steps below.

1. Select the Operating Pressure column closest to that desired.

2. In the same column, identify the force required to move the load (always rounding up). If the piston rod is in compression use the ‘Push’ row and if the piston rod is in tension use the ‘Pull’ row.

3. In the row to the left is the bore required. To select the correct rod diameter for the stroke required use the Piston Rod-Stroke Selection Chart on page C-67.

If the cylinder envelope dimensions are too large for the application, increase the operating pressure to the maximum pressure in the table below, if possible, and repeat steps 1 - 3.

Push and Pull Force in Pounds

60 80 100 60 80 100Push 1.767 106 141 177 Push 19.635 1178 1571 1964Pull 1.460 88 117 146 Pull 18.850 1131 1508 1885

Push 3.142 189 251 314 Push 19.635 1178 1571 1964Pull 2.835 170 227 284 Pull 18.150 1089 1452 1815

Push 3.142 189 251 – Push 19.635 1178 1571 –Pull 2.357 141 189 – Pull 17.230 1034 1378 –



Push 8.296 498 664 830 Push 28.274 1696 2262 –Pull 7.511 451 601 751 Pull 25.132 1508 2011 –



Push 12.566 754 1005 1257 Push 50.265 3016 4021 –Pull 11.781 707 942 1178 Pull 45.365 2722 3629 –

Push 12.566 754 1005 1257Pull 11.081 665 886 1108

Push 12.566 754 1005 –Pull 10.161 610 813 –

1 3/4

2

8

1 3/8

1 3/4

2 1/2

Operating Pressure in psi

5

1

1 3/8

1 3/4

PistonArea

(inches²)

6

1 3/8

1 3/8

1

5/8

12

1

1 3/8

5/8

1

4

1 3/4

3 1/4

1 3/4

5/8

RodØ

2 1/2

RodØ

OperatingDirection

1 1/2

BoreØ

OperatingDirection

PistonArea

(inches²)

Operating Pressure in psi Bore Ø

Cylinder Pressure Rating & Rod Lock Holding Force1 1/2 2 1/2 3 1/4

5/8 5/8 1 5/8, 11,

1 3/81,

1 3/81 3/4

1,1 3/8

1 3/41 3/8,1 3/4

21 3/8,1 3/4

2 1/2

Bore Ø 4 5 6 8

Rod Ø

CylinderPressure Rating (psi)

Rod LockHolding Force (lb.)

2

100

180

100

314

80

250

100

491

100

830

100

1256

80

1005

100

1963

80

1570

100

2830

80

2264

100

5026

80

4020




PA-2

A

NC

9R

od L

ock

Rod Lock Connection / Specifications

Rod Lock Connection / Rod Lock SpecificationsConnectionThe Rod Lock release signal should be taken from the main air supply and must be 60 psi or higher. Avoid using cylinder lines for the release signal because pressure levels may drop below the specified minimum. A separate quick-venting valve should be used for ON/OFF operation of the Rod Lock.

Caution: Release pressures that fall below 60 psi may result in engagement of the rod lock.The Rod Lock is not intended to stop a moving load. The piston rod should not be moving when the Rod Lock release signal is removed.

NC9/PA-2 Series with Rod Lock is not intended for use in water service applications, environments with high humidity levels, or when fluids may splash on the cylinder or piston rod.

Other NC9/PA-2 Series and Rod Lock Features• The Rod Lock can be operated in both directions,

engaging with the same holding force

• The NC9/PA-2 Series with Rod Lock can be mounted in any orientation. E.g. vertical, horizontal, rod up or down.

• The piston rod must not be rotated when the Rod Lock is engaged. The Rod Lock cannot be used for torsional braking.

• Rated Rod Lock holding force applies only to static load conditions. If the rated load value is exceeded, slippage and other problems (including damage to Rod Lock and piston rod) may occur.

• An unrelated, redundant safety system is recommended to help ensure personal safety.

Sample Pneumatic Circuit

1. The Lock Valve must be energized during cylinder motion. When the Lock Valve is not energized, the Rod Lock is engaged and the Cylinder Valve must be in the mid-position.

2. The Cylinder Valve must be energized during extend or retract. It should also be energized at stroke end until a change of direction is required.

3. The 5/3 Cylinder Valve mid-position may be pressurized outlets if the combination of pressure load on the cylinder and the inertia effects of the attached load do not exceed the holding force rating of the rod lock device, including allowance for wear.

4. Do not use cylinder lines for logic functions because pressures can vary significantly.

3/2 LOCK VALVE(internal pilot)

Auxiliary Supply

Main Supply

5/3 CYLINDER VALVE

(external pilot)

1.50 0.625 0.25 180 2 1000.625 0.71 314 5 1001.000 0.68 250 5 800.625 1.26 491 7 1001.000 1.49 491 7 1001.000 3.20 830 17 1001.375 2.11 830 17 1001.000 6.73 1256 45 1001.375 4.78 1256 45 1001.750 3.36 1005 45 801.000 11.50 1963 72 1001.375 9.50 1963 72 1001.750 8.28 1570 72 801.375 14.08 2830 135 1001.750 12.75 2830 135 1002.000 12.30 2264 135 801.375 22.66 5026 160 1001.750 23.21 5026 160 1002.500 17.53 4020 160 80

CylinderPressure

Rating (psi)

RodØ

RatedHolding

Force (lbs)

Minimum OverrideTorque

(ft-lbs applied to hex shaft)

2.00

6.00

8.00

Air ChamberVolume (in3)

2.50

3.25

4.00

5.00

BoreØ

Rod Lock Specifications


Catalog SB0106-7



Weight of Cylinder with Rod Lock

Cylinder WeightsTo determine the weight of an NC9 or PA-2 Series with Rod Lock cylinder, first select the basic zero stroke weight for the mounting required, and then calculate the weight of the cylinder stroke and add the results to the basic weight. For extra rod extension, use piston rod weights per inch in Table B.

1 1/2 5/8 6.0 6.6 0.30 6.5 7.1 0.605/8 10.0 10.4 0.50 11.7 12.1 1.001 10.5 11.0 0.65 12.5 13.0 1.30

5/8 13.6 14.3 0.60 16.0 16.7 1.201 14.1 14.6 0.75 16.6 17.1 1.501 24.6 25.6 0.80 30.1 31.1 1.60

1 3/8 25.1 26.1 1.00 30.6 31.6 2.001 3/4 25.9 26.9 1.25 32.2 33.2 2.50

1 38.7 43.7 1.00 45.7 50.7 2.001 3/8 39.2 44.2 1.20 46.2 51.2 2.501 3/4 40.0 45.0 1.50 47.8 52.8 3.00

1 56.3 63.3 1.10 65.3 72.3 2.201 3/8 56.8 63.8 1.30 65.8 72.8 2.601 3/4 57.6 64.6 1.55 67.4 74.4 3.101 3/8 104.8 113.8 1.50 116.8 125.8 3.001 3/4 105.6 114.6 1.75 118.5 127.5 3.50

2 106.3 115.3 2.00 120.0 129.0 4.001 3/8 158.4 163.4 2.00 172.4 177.4 4.001 3/4 159.2 164.2 2.25 174.1 179.1 4.502 1/2 161.7 166.7 3.00 179.1 184.1 6.00

4

Add Per Inch of Stroke

Double Rod CylindersBasic Weight - Zero Stroke

5

6

8

Single Rod CylindersBasic Weight - Zero Stroke

MX0, MX1, MX2, MX3, MF1, MF2, MS4

MP1, MPU3, MS2, MT1, MT2, MT4

BoreØ

RodØ

3 1/4

2

Add Per Inch of StrokeMDX0, MDX1, MDX3,

MDF1, MDS4MDS2, MDT1,

MDT4

2 1/2

Table A – NC9 or PA-2 Series Cylinder with Rod Lock Weights in Pounds

Table B – Piston Rod Weights in PoundsRod

Ø5/8"1"

1 3/8"1 3/4"

2"2 1/2"

0.420.680.891.40

0.090.22

Piston RodWeight Per Inch




PA-2

A

NC

9R

od L

ock

Style MX0 – Single Rod End

Style MX0 Single Rod End – Envelope and Mounting Dimensions

Rod End Dimensions Thread Style 4(or Automotive Male Style 5*)Thread Style 3Thread Style 2 “Special”

Thread Style 0Special thread, extension, rod eye, blank, etc. are also available. To order, specify “Style 0” and give desired dimensions for KK, A, & WF. If otherwise special furnish dimensional sketch.

Style MX0 Single Rod End – Rod Dimensions

Style MX0 – Single Rod End 11/2" to 8" Bore Size

ROD LOCKUNLOCK

1

2

3

4

RSQ.

ESQ.

Y P + STROKEH

LG + STROKEKGNR

.23

J

EEWF

ØMMN1

N2

N3F1

Q EF

BoreØ

E EENPTF

EFNPTF

F1 G J K N3Hex

NR(Max.)

R P Add

Stroke1.50 2.00 3/8 1/8 0.25 1.50 1.00 0.25 5/16 0.24 1.43 2.252.00 2.50 3/8 1/8 0.31 1.50 1.00 0.32 1/2 0.32 1.84 2.252.50 3.00 3/8 1/8 0.31 1.50 1.00 0.32 1/2 0.32 2.19 2.383.25 3.75 1/2 1/4 0.38 1.75 1.25 0.38 5/8 0.41 2.76 2.634.00 4.50 1/2 1/4 0.38 1.75 1.25 0.38 7/8 0.55 3.32 2.635.00 5.50 1/2 1/4 0.50 1.75 1.25 0.44 7/8 0.55 4.10 2.886.00 6.50 3/4 1/4 0.50 2.00 1.50 0.44 1 5/16 0.81 4.88 3.138.00 8.50 3/4 1/4 0.63 2.00 1.50 0.56 1 5/16 0.81 6.44 3.25

ØB

ØNA

ØMM

ROD LOCKUNLOCKD WRENCH

FLATS

WF

VD

A

CKK


FLATS

WF

VD

ØB

ØNA

A

ØMM

C

KK


FLATSØMM

ØB

ØNA

WFA

VDCCC

(or AC*)

CCStyle4 & 5*

KKStyle2 & 3

A AC* B +.000-.002

C D H N1 N2 NA Q VD WF Y

1.50 0.625 1/2-20 7/16-20 0.75 1.13 1.124 0.38 0.50 2.63 0.22 0.14 0.56 0.72 0.38 1.00 4.81 6.500.625 1/2-20 7/16-20 0.75 1.13 1.124 0.38 0.50 2.88 0.34 0.13 0.56 0.90 0.38 1.00 5.13 6.811.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 3.88 0.34 0.15 0.94 1.07 0.50 1.38 6.50 7.810.625 1/2-20 7/16-20 0.75 1.13 1.124 0.38 0.50 2.88 0.35 0.15 0.56 0.76 0.50 1.00 5.13 6.941.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 4.00 0.35 0.15 0.94 1.12 0.50 1.38 6.63 8.061.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 4.50 0.63 0.18 0.94 1.51 0.50 1.38 7.31 9.131.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 4.88 0.81 0.25 1.31 1.65 0.63 1.63 7.94 9.501.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 4.88 0.63 0.24 0.94 1.73 0.50 1.38 7.69 9.501.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 5.13 0.77 0.28 1.31 1.68 0.75 1.63 8.19 9.751.750 1 1/2-12 1 1/4-12 2.00 3.00 2.374 0.75 1.50 5.50 1.03 0.26 1.69 2.09 0.88 1.88 8.81 10.131.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 5.38 0.72 0.22 0.94 2.00 0.50 1.38 8.31 10.381.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 5.75 0.72 0.22 1.31 2.33 0.75 1.63 8.94 10.751.750 1 1/2-12 1 1/4-12 2.00 3.00 2.374 0.75 1.50 6.38 1.10 0.22 1.69 2.30 0.88 1.88 9.81 11.381.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 6.38 1.17 0.18 1.31 2.71 0.76 1.63 9.69 11.881.750 1 1/2-12 1 1/4-12 2.00 3.00 2.374 0.75 1.50 6.88 1.50 0.18 1.69 3.07 0.88 1.88 10.44 12.382.000 1 3/4-12 1 1/2-12 2.25 3.50 2.624 0.88 1.69 7.00 1.49 0.18 1.94 3.18 1.25 2.00 10.69 12.501.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 6.63 1.31 0.18 1.31 2.89 0.76 1.63 10.06 12.381.750 1 1/2-12 1 1/4-12 2.00 3.50 2.374 0.75 1.50 7.13 1.57 0.18 1.69 3.15 0.88 1.88 10.81 12.882.500 2 1/4-12 1 7/8-12 3.00 4.50 3.124 1.00 2.06 7.50 1.22 0.30 2.38 3.15 1.38 2.25 11.56 13.25

5.00

6.00

8.00

BoreØ

2.00

2.50

3.25

4.00

MMRod

Ø

ThreadLGAdd

Stroke

Rod Extensions and Pilot Dimensions

*Thread length AC is supplied with Automotive Male rod end style 5.


Catalog SB0106-7



Style MX1, MX2, MX3 – Single Rod End

Style MX1, MX2, MX3 Single Rod End – Envelope and Mounting Dimensions

Style MX1, MX2, MX3 Single Rod End – Rod Dimensions

Style MX1 – Single Rod End* 11/2" to 8" Bore Size

ESQ.

RSQ.

LG + STROKEWFDD

1

2

3

4

KBB

AAK

BB

BoreØ

AA BB DD E K R

1.50 2.02 1.00 1/4-28 2.00 0.25 1.432.00 2.60 1.13 5/16-24 2.50 0.31 1.842.50 3.10 1.13 5/16-24 3.00 0.31 2.193.25 3.90 1.38 3/8-24 3.75 0.38 2.764.00 4.70 1.38 3/8-24 4.50 0.38 3.325.00 5.80 1.81 1/2-20 5.50 0.44 4.106.00 6.90 1.81 1/2-20 6.50 0.44 4.888.00 9.10 2.31 5/8-18 8.50 0.31 6.44

1.50 0.625 1/2-20 7/16-20 0.75 1.13 1.124 0.38 0.50 0.56 0.38 1.00 6.500.625 1/2-20 7/16-20 0.75 1.13 1.124 0.38 0.50 0.56 0.38 1.00 6.811.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 7.810.625 1/2-20 7/16-20 0.75 1.13 1.124 0.38 0.50 0.56 0.50 1.00 6.941.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 8.061.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 9.131.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.63 1.63 9.501.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 9.501.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.75 1.63 9.751.750 1 1/2-12 1 1/4-12 2.00 3.00 2.374 0.75 1.50 1.69 0.88 1.88 10.131.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 10.381.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.75 1.63 10.751.750 1 1/2-12 1 1/4-12 2.00 3.00 2.374 0.75 1.50 1.69 0.88 1.88 11.381.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.75 1.63 11.881.750 1 1/2-12 1 1/4-12 2.00 3.00 2.374 0.75 1.50 1.69 0.88 1.88 12.382.000 1 3/4-12 1 1/2-12 2.25 3.50 2.624 0.88 1.69 1.94 1.25 2.00 12.501.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.75 1.63 12.381.750 1 1/2-12 1 1/4-12 2.00 3.50 2.374 0.75 1.50 1.69 0.88 1.88 12.882.500 2 1/4-12 1 7/8-12 3.00 4.50 3.124 1.00 2.06 2.38 1.38 2.25 13.25

MMRod

Ø

2.00

6.00

8.00

4.00

5.00

2.50

3.25

BoreØ

ThreadCC

Style4 & 5*

KKStyle2 & 3

NARod Extensions and Pilot Dimensions

VD WF LGAdd

Stroke

A B +.000-.002

C DAC*

* Style MX3 – Tie Rods Extended Head End, and Style MX2 – Tie Rods Extended Cap End can be dimensioned from Style MX1 shown.



ØB

ØNA

ØMM


FLATS

WF

VD

A

CKK


FLATS

WF

VD

ØB

ØNA

A

ØMM

C

KK


FLATSØMM

ØB

ØNA

WFA

VDCCC

(or AC*)





PA-2

A

NC

9R

od L

ock

Style MF1 – Single Rod End

Style MF1 Single Rod End – Envelope and Mounting Dimensions

Rod End DimensionsThread Style 3Thread Style 2

“Special” Thread Style 0Special thread, extension, rod eye, blank, etc. are also available. To order, specify “Style 0” and give desired dimensions for KK, A, & W. If otherwise special furnish dimensional sketch.

Style MF1 Single Rod End – Rod Dimensions

Style MF1 – Single Rod End 11/2" to 8" Bore Size

LG + STROKE1

2

3

4

UF

E

E F2

W

ZJ + STROKE

R

TFØ FB4 HOLES

BoreØ

E F2 FB (Bolt)

R TF UF

1.50 2.00 0.63 0.25 1.43 2.75 3.382.00 2.50 0.63 0.31 1.84 3.38 4.132.50 3.00 0.63 0.31 2.19 3.88 4.633.25 3.75 0.75 0.38 2.76 4.69 5.504.00 4.50 0.75 0.38 3.32 5.44 6.255.00 5.50 0.75 0.50 4.10 6.63 7.636.00 6.50 0.75 0.50 4.88 7.63 8.638.00 8.50 1.00 0.63 6.44 9.75 11.00

1.50 0.625 1/2-20 7/16-20 0.75 1.13 1.124 0.38 0.50 0.56 – 0.63 6.50 7.750.625 1/2-20 7/16-20 0.75 1.13 1.124 0.38 0.50 0.56 – 0.63 6.81 8.061.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 – 1.00 7.81 9.440.625 1/2-20 7/16-20 0.75 1.13 1.124 0.38 0.50 0.56 – 0.63 6.94 8.191.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 – 1.00 8.06 9.691.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 – 0.75 9.13 10.631.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 – 1.00 9.50 11.251.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 – 0.75 9.50 11.001.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 – 1.00 9.75 11.501.750 1 1/2-12 1 1/4-12 2.00 3.00 2.374 0.75 1.50 1.69 0.13 1.25 10.13 12.131.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 – 0.75 10.38 11.881.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 – 1.00 10.75 12.501.750 1 1/2-12 1 1/4-12 2.00 3.00 2.374 0.75 1.50 1.69 0.13 1.25 11.38 13.381.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 – 0.88 11.88 13.501.750 1 1/2-12 1 1/4-12 2.00 3.00 2.374 0.75 1.50 1.69 0.13 1.13 12.38 14.252.000 1 3/4-12 1 1/2-12 2.25 3.50 2.624 0.88 1.69 1.94 0.50 1.25 12.50 14.501.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 – 0.88 12.38 14.251.750 1 1/2-12 1 1/4-12 2.00 3.50 2.374 0.75 1.50 1.69 – 1.13 12.88 15.002.500 2 1/4-12 1 7/8-12 3.00 4.50 3.124 1.00 2.06 2.38 0.38 1.50 13.25 15.75

MMRod

Ø

2.00

6.00

8.00

4.00

5.00

2.50

3.25

BoreØ

ThreadCC

Style4 & 5*

KKStyle2 & 3

Add StrokeLG ZJNA

Rod Extensions and Pilot DimensionsV WA B

+.000-.002

C DAC*

ØB

ØNA

ØMM


FLATS

WAV

CKK


FLATS

WV

CCC

ØB

ØNA

ØMM

A(or AC*)


FLATS

VW

ØNA

ØMM

ØB

C

A

KK


Thread Style 4(or Automotive Male Style 5*)


Catalog SB0106-7



Style MF2 – Single Rod End

Style MF2 Single Rod End – Envelope and Mounting Dimensions

Style MF2 Single Rod End – Rod Dimensions

Style MF2 – Single Rod End 11/2" to 8" Bore Size

1

2

3

4

WF

ZF + STROKE

LB + STROKE

F

UF

E

E Ø FB4 HOLES

R

TF

BoreØ

E F FB (Bolt)

R TF UF

1.50 2.00 0.38 0.25 1.43 2.75 3.382.00 2.50 0.38 0.31 1.84 3.38 4.132.50 3.00 0.38 0.31 2.19 3.88 4.633.25 3.75 0.63 0.38 2.76 4.69 5.504.00 4.50 0.63 0.38 3.32 5.44 6.255.00 5.50 0.63 0.50 4.10 6.63 7.636.00 6.50 0.75 0.50 4.88 7.63 8.638.00 8.50 – 0.69* 7.57* 7.57* 8.50* * Style ME4 Square Cap mount supplied in 8" bore.

1.50 0.625 1/2-20 7/16-20 0.75 1.13 1.124 0.38 0.50 0.56 0.38 1.00 6.88 7.880.625 1/2-20 7/16-20 0.75 1.13 1.124 0.38 0.50 0.56 0.38 1.00 7.19 8.191.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 8.19 9.560.625 1/2-20 7/16-20 0.75 1.13 1.124 0.38 0.50 0.56 0.50 1.00 7.31 8.311.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 8.44 9.811.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 9.75 11.131.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.63 1.63 10.13 11.751.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 10.13 11.501.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.75 1.63 10.38 12.001.750 1 1/2-12 1 1/4-12 2.00 3.00 2.374 0.75 1.50 1.69 0.88 1.88 10.75 12.631.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 11.00 12.381.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.75 1.63 11.38 13.001.750 1 1/2-12 1 1/4-12 2.00 3.00 2.374 0.75 1.50 1.69 0.88 1.88 12.00 13.881.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.75 1.63 12.63 14.251.750 1 1/2-12 1 1/4-12 2.00 3.00 2.374 0.75 1.50 1.69 0.88 1.88 13.13 15.002.000 1 3/4-12 1 1/2-12 2.25 3.50 2.624 0.88 1.69 1.94 1.25 2.00 13.25 15.251.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.75 1.63 12.38* 14.00*1.750 1 1/2-12 1 1/4-12 2.00 3.50 2.374 0.75 1.50 1.69 0.88 1.88 12.88* 14.25*2.500 2 1/4-12 1 7/8-12 3.00 4.50 3.124 1.00 2.06 2.38 1.38 2.25 13.25* 15.50*

3.25

BoreØ

Add StrokeLB ZFNA

Rod Extensions and Pilot DimensionsVD WFD

ThreadCC

Style4 & 5*

KKStyle2 & 3

AC*

8.00

A B +.000-.002

CMMRod

Ø

2.00

6.00

4.00

5.00

2.50



ØB

ØNA

ØMM


FLATS

WF

VD

A

CKK


FLATS

WF

VD

ØB

ØNA

A

ØMM

C

KK


FLATSØMM

ØB

ØNA

WFA

VDCCC

(or AC*)





PA-2

A

NC

9R

od L

ock

Style MS2 – Single Rod End

Style MS2 Single Rod End – Envelope and Mounting Dimensions

Style MS2 Single Rod End – Rod Dimensions

Style MS2 – Single Rod End 11/2" to 8" Bore Size

1

2

3

4

WF

-.005-.010 ST

SW SWXS SS + STROKE

ESQ.

SW TS

E/2

SU

LG + STROKE

SW

US

Ø SB4 HOLES

SU

BoreØ

E SB (Bolt)

ST SU SW TS US SS Add Stroke

1.50 2.00 0.38 0.50 0.94 0.38 2.75 3.50 2.882.00 2.50 0.38 0.50 0.94 0.38 3.25 4.00 2.882.50 3.00 0.38 0.50 0.94 0.38 3.75 4.50 3.003.25 3.75 0.50 0.75 1.25 0.50 4.75 5.75 3.254.00 4.50 0.50 0.75 1.25 0.50 5.50 6.50 3.255.00 5.50 0.75 1.00 1.56 0.69 6.88 8.25 3.136.00 6.50 0.75 1.00 1.56 0.69 7.88 9.25 3.638.00 8.50 0.75 1.00 1.56 0.69 9.88 11.25 3.75

1.50 0.625 1/2-20 7/16-20 0.75 1.13 1.124 0.38 0.50 0.56 0.38 1.00 4.25 6.500.625 1/2-20 7/16-20 0.75 1.13 1.124 0.38 0.50 0.56 0.38 1.00 4.56 6.811.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 5.94 7.810.625 1/2-20 7/16-20 0.75 1.13 1.124 0.38 0.50 0.56 0.50 1.00 4.56 6.941.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 6.06 8.061.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 6.75 9.131.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.63 1.63 7.38 9.501.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 7.13 9.501.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.75 1.63 7.63 9.751.750 1 1/2-12 1 1/4-12 2.00 3.00 2.374 0.75 1.50 1.69 0.88 1.88 8.25 10.131.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 7.94 10.381.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.75 1.63 8.56 10.751.750 1 1/2-12 1 1/4-12 2.00 3.00 2.374 0.75 1.50 1.69 0.88 1.88 9.44 11.381.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.75 1.63 9.19 11.881.750 1 1/2-12 1 1/4-12 2.00 3.00 2.374 0.75 1.50 1.69 0.88 1.88 9.94 12.382.000 1 3/4-12 1 1/2-12 2.25 3.50 2.624 0.88 1.69 1.94 1.25 2.00 10.19 12.501.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.75 1.63 9.56 12.381.750 1 1/2-12 1 1/4-12 2.00 3.50 2.374 0.75 1.50 1.69 0.88 1.88 10.31 12.882.500 2 1/4-12 1 7/8-12 3.00 4.50 3.124 1.00 2.06 2.38 1.38 2.25 11.06 13.25

LGAdd

Stroke

MMRod

Ø

2.00

ThreadCC

Style4 & 5*

KKStyle2 & 3

NA VD WF

8.00

4.00

5.00

Rod Extensions and Pilot Dimensions

2.50

3.25

BoreØ

6.00

XSA B +.000-.002

C DAC*



ØB

ØNA

ØMM


FLATS

WF

VD

A

CKK


FLATS

WF

VD

ØB

ØNA

A

ØMM

C

KK


FLATSØMM

ØB

ØNA

WFA

VDCCC

(or AC*)



Catalog SB0106-7



Style MS4 – Single Rod End

Style MS4 Single Rod End – Envelope and Mounting Dimensions

Style MS4 Single Rod End – Rod Dimensions

Style MS4 – Single Rod End 11/2" to 8" Bore Size

1

2

3

4

WF

ESQ.

TN NT THREAD, ND DEEP4 TAPPED MTG. HOLES

XT SN + STROKE

LG + STROKE

-.005-.010E/2

BoreØ

E ND NT TN SN Add Stroke

1.50 2.00 0.31 1/4-20 0.63 2.252.00 2.50 0.34 5/16-18 0.88 2.252.50 3.00 0.44 3/8-16 1.25 2.383.25 3.75 0.50 1/2-13 1.50 2.634.00 4.50 0.63 1/2-13 2.06 2.635.00 5.50 0.75 5/8-11 2.69 2.886.00 6.50 0.88 3/4-10 3.25 3.138.00 8.50 1.13 3/4-10 4.25 3.25

1.50 0.625 1/2-20 7/16-20 0.75 1.13 1.124 0.38 0.50 0.56 0.38 1.00 4.81 6.500.625 1/2-20 7/16-20 0.75 1.13 1.124 0.38 0.50 0.56 0.38 1.00 5.13 6.811.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 6.50 7.810.625 1/2-20 7/16-20 0.75 1.13 1.124 0.38 0.50 0.56 0.50 1.00 5.13 6.941.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 6.63 8.061.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 7.31 9.131.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.63 1.63 7.94 9.501.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 7.69 9.501.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.75 1.63 8.19 9.751.750 1 1/2-12 1 1/4-12 2.00 3.00 2.374 0.75 1.50 1.69 0.88 1.88 8.81 10.131.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 8.31 10.381.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.75 1.63 8.94 10.751.750 1 1/2-12 1 1/4-12 2.00 3.00 2.374 0.75 1.50 1.69 0.88 1.88 9.81 11.381.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.75 1.63 9.69 11.881.750 1 1/2-12 1 1/4-12 2.00 3.00 2.374 0.75 1.50 1.69 0.88 1.88 10.44 12.382.000 1 3/4-12 1 1/2-12 2.25 3.50 2.624 0.88 1.69 1.94 1.25 2.00 10.69 12.501.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.75 1.63 10.06 12.381.750 1 1/2-12 1 1/4-12 2.00 3.50 2.374 0.75 1.50 1.69 0.88 1.88 10.81 12.882.500 2 1/4-12 1 7/8-12 3.00 4.50 3.124 1.00 2.06 2.38 1.38 2.25 11.56 13.25

LGAdd

Stroke

C DBore

ØThread

CCStyle4 & 5*

KKStyle2 & 3

Rod Extensions and Pilot DimensionsXT

2.00

6.00

8.00

4.00

5.00

2.50

3.25

MMRod

ØNA VD WFA B

+.000-.002

AC*



ØB

ØNA

ØMM


FLATS

WF

VD

A

CKK


FLATS

WF

VD

ØB

ØNA

A

ØMM

C

KK


FLATSØMM

ØB

ØNA

WFA

VDCCC

(or AC*)





PA-2

A

NC

9R

od L

ock

Style MP1 – Single Rod End

Style MP1 Single Rod End – Envelope and Mounting Dimensions

Style MP1 Single Rod End – Rod Dimensions

Style MP1 – Single Rod End 11/2" to 8" Bore Size

1

2

3

4

CB

WF LG + STROKE

CW CW

CD

L M

MRLR

ZC + STROKE

XC + STROKE

ESQ.

BoreØ

CB CD * +.000–.002

CW E L LR M MR

1.50 0.75 0.501 0.50 2.00 0.75 0.75 0.50 0.632.00 0.75 0.501 0.50 2.50 0.75 0.75 0.50 0.632.50 0.75 0.501 0.50 3.00 0.75 0.75 0.50 0.633.25 1.25 0.751 0.63 3.75 1.25 1.00 0.75 0.944.00 1.25 0.751 0.63 4.50 1.25 1.00 0.75 0.945.00 1.25 0.751 0.63 5.50 1.25 1.00 0.75 0.946.00 1.50 1.001 0.75 6.50 1.50 1.25 1.00 1.198.00 1.50 1.001 0.75 8.50 1.50 1.25 1.00 1.19 * Dimension CD is pin diameter.

1.50 0.625 1/2-20 7/16-20 0.75 1.13 1.124 0.38 0.50 0.56 0.38 1.00 6.50 8.25 8.750.625 1/2-20 7/16-20 0.75 1.13 1.124 0.38 0.50 0.56 0.38 1.00 6.81 8.56 9.061.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 7.81 9.94 10.440.625 1/2-20 7/16-20 0.75 1.13 1.124 0.38 0.50 0.56 0.50 1.00 6.94 8.69 9.191.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 8.06 10.19 10.691.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 9.13 11.75 12.501.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.63 1.63 9.50 12.38 13.131.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 9.50 12.13 12.881.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.75 1.63 9.75 12.63 13.381.750 1 1/2-12 1 1/4-12 2.00 3.00 2.374 0.75 1.50 1.69 0.88 1.88 10.13 13.25 14.001.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 10.38 13.00 13.751.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.75 1.63 10.75 13.63 14.381.750 1 1/2-12 1 1/4-12 2.00 3.00 2.374 0.75 1.50 1.69 0.88 1.88 11.38 14.50 15.251.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.75 1.63 11.88 15.00 16.001.750 1 1/2-12 1 1/4-12 2.00 3.00 2.374 0.75 1.50 1.69 0.88 1.88 12.38 15.75 16.752.000 1 3/4-12 1 1/2-12 2.25 3.50 2.624 0.88 1.69 1.94 1.25 2.00 12.50 16.00 17.001.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.75 1.63 12.38 15.50 16.501.750 1 1/2-12 1 1/4-12 2.00 3.50 2.374 0.75 1.50 1.69 0.88 1.88 12.88 16.25 17.252.500 2 1/4-12 1 7/8-12 3.00 4.50 3.124 1.00 2.06 2.38 1.38 2.25 13.25 17.00 18.00

BoreØ

ThreadCC

Style4 & 5*

KKStyle2 & 3

MMRod

ØWF

8.00

4.00

5.00

2.50

3.25

A B +.000-.002

2.00

6.00

AC*Add Stroke

ZCC D LG XCNARod Extensions and Pilot Dimensions

VD



ØB

ØNA

ØMM


FLATS

WF

VD

A

CKK


FLATS

WF

VD

ØB

ØNA

A

ØMM

C

KK


FLATSØMM

ØB

ØNA

WFA

VDCCC

(or AC*)



Catalog SB0106-7



Style MPU3 – Single Rod End

Style MPU3 Single Rod End – Envelope and Mounting Dimensions

Style MPU3 Single Rod End – Rod Dimensions

Style MPU3 – Single Rod End 11/2" to 8" Bore Size

ESQ.

1

4

3

2

WF

XC + STROKE MA

ØCD

LUBRICATIONFITTING

EXA NRMS

LG + STROKE

ØMM

KK

BoreØ

CD *+.0000–.0005

E EX MA MS NR

1.50 0.5000 2.00 0.44 0.75 0.94 0.632.00 0.5000 2.50 0.44 0.75 0.94 0.632.50 0.5000 3.00 0.44 0.75 0.94 0.633.25 0.7500 3.75 0.66 1.00 1.38 1.004.00 0.7500 4.50 0.66 1.00 1.38 1.005.00 0.7500 5.50 0.66 1.00 1.38 1.006.00 1.0000 6.50 0.88 1.25 1.69 1.258.00 1.0000 8.50 0.88 1.25 1.69 1.25 * Dimension CD is hole diameter.

1.50 0.625 7/16-20 – 0.75 1.00 6.50 8.250.625 7/16-20 – 0.75 1.00 6.81 8.561.000 – 7/16-20 1.13 1.38 7.81 9.940.625 7/16-20 – 0.75 1.00 6.94 8.691.000 – 7/16-20 1.13 1.38 8.06 10.191.000 3/4-16 – 1.13 1.38 9.13 11.751.375 – 3/4-16 1.63 1.63 9.50 12.381.000 3/4-16 – 1.13 1.38 9.50 12.131.375 – 3/4-16 1.63 1.63 9.75 12.631.750 – 3/4-16 2.00 1.88 10.13 13.251.000 3/4-16 – 1.13 1.38 10.38 13.001.375 – 3/4-16 1.63 1.63 10.75 13.631.750 – 3/4-16 2.00 1.88 11.38 14.501.375 1-14 – 1.63 1.63 11.88 15.001.750 – 1-14 2.00 1.88 12.38 15.752.000 – 1-14 2.25 2.00 12.50 16.001.375 1-14 – 1.63 1.63 12.38 15.501.750 – 1-14 2.00 1.88 12.88 16.252.500 – 1-14 3.00 2.25 13.25 17.00

2.50

3.25

Add StrokeXC

BoreØ

ThreadKK

Style 3KK

Style 7

A

6.00

8.00

4.00

5.00

LGMMRod

Ø

2.00

WF




PA-2

A

NC

9R

od L

ock

Style MT1 – Single Rod End

Style MT1 – Single Rod End 11/2" to 8" Bore Size

1

2

3

4

WF

E

E

ØTD

XG

UT

TL TL

LG + STROKE

Style MT1 Single Rod End – Envelope and Mounting Dimensions

Style MT1 Single Rod End – Rod Dimensions

BoreØ

E TD +.000–.001

TL UT

1.50 2.00 1.000 1.00 4.002.00 2.50 1.000 1.00 4.502.50 3.00 1.000 1.00 5.003.25 3.75 1.000 1.00 5.754.00 4.50 1.000 1.00 6.505.00 5.50 1.000 1.00 7.506.00 6.50 1.375 1.38 9.258.00 8.50 1.375 1.38 11.25

1.50 0.625 1/2-20 7/16-20 0.75 1.13 1.124 0.38 0.50 0.56 0.38 1.00 4.63 6.500.625 1/2-20 7/16-20 0.75 1.13 1.124 0.38 0.50 0.56 0.38 1.00 4.94 6.811.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 6.31 7.810.625 1/2-20 7/16-20 0.75 1.13 1.124 0.38 0.50 0.56 0.50 1.00 4.94 6.941.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 6.44 8.061.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 7.13 9.131.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.63 1.63 7.75 9.501.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 7.50 9.501.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.75 1.63 8.00 9.751.750 1 1/2-12 1 1/4-12 2.00 3.00 2.374 0.75 1.50 1.69 0.88 1.88 8.63 10.131.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 8.13 10.381.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.75 1.63 8.75 10.751.750 1 1/2-12 1 1/4-12 2.00 3.00 2.374 0.75 1.50 1.69 0.88 1.88 9.63 11.381.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.75 1.63 9.50 11.881.750 1 1/2-12 1 1/4-12 2.00 3.00 2.374 0.75 1.50 1.69 0.88 1.88 10.25 12.382.000 1 3/4-12 1 1/2-12 2.25 3.50 2.624 0.88 1.69 1.94 1.25 2.00 10.50 12.501.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.75 1.63 9.88 12.381.750 1 1/2-12 1 1/4-12 2.00 3.50 2.374 0.75 1.50 1.69 0.88 1.88 10.63 12.882.500 2 1/4-12 1 7/8-12 3.00 4.50 3.124 1.00 2.06 2.38 1.38 2.25 11.38 13.25

Rod Extensions and Pilot DimensionsBoreØ

ThreadCC

Style4 & 5*

KKStyle2 & 3

AC*

2.00

6.00

8.00

4.00

5.00

2.50

3.25

LGAdd

Stroke

XGMMRod

ØNA VD WFA B

+.000-.002

C D



ØB

ØNA

ØMM


FLATS

WF

VD

A

CKK


FLATS

WF

VD

ØB

ØNA

A

ØMM

C

KK


FLATSØMM

ØB

ØNA

WFA

VDCCC

(or AC*)



Catalog SB0106-7







1

2

3

4

WF

E

ØTD

UT

TLTL E

LG + STROKE

XJ + STROKE

BoreØ

E TD +.000–.001

TL UT

1.50 2.00 1.000 1.00 4.002.00 2.50 1.000 1.00 4.502.50 3.00 1.000 1.00 5.003.25 3.75 1.000 1.00 5.754.00 4.50 1.000 1.00 6.505.00 5.50 1.000 1.00 7.506.00 6.50 1.375 1.38 9.258.00 8.50 1.375 1.38 11.25

1.50 0.625 1/2-20 7/16-20 0.75 1.13 1.124 0.38 0.50 0.56 0.38 1.00 6.50 7.000.625 1/2-20 7/16-20 0.75 1.13 1.124 0.38 0.50 0.56 0.38 1.00 6.81 7.311.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 7.81 8.690.625 1/2-20 7/16-20 0.75 1.13 1.124 0.38 0.50 0.56 0.50 1.00 6.94 7.441.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 8.06 8.941.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 9.13 9.881.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.63 1.63 9.50 10.501.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 9.50 10.251.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.75 1.63 9.75 10.751.750 1 1/2-12 1 1/4-12 2.00 3.00 2.374 0.75 1.50 1.69 0.88 1.88 10.13 11.381.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 10.38 11.131.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.75 1.63 10.75 11.751.750 1 1/2-12 1 1/4-12 2.00 3.00 2.374 0.75 1.50 1.69 0.88 1.88 11.38 12.631.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.75 1.63 11.88 12.751.750 1 1/2-12 1 1/4-12 2.00 3.00 2.374 0.75 1.50 1.69 0.88 1.88 12.38 13.502.000 1 3/4-12 1 1/2-12 2.25 3.50 2.624 0.88 1.69 1.94 1.25 2.00 12.50 13.751.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.75 1.63 12.38 13.251.750 1 1/2-12 1 1/4-12 2.00 3.50 2.374 0.75 1.50 1.69 0.88 1.88 12.88 14.002.500 2 1/4-12 1 7/8-12 3.00 4.50 3.124 1.00 2.06 2.38 1.38 2.25 13.25 14.75

C DBore

ØThread

CCStyle4 & 5*

KKStyle2 & 3

AC*

2.00

6.00

8.00

4.00

5.00

2.50

3.25

LGAdd Stroke

XJMMRod

ØNA

Rod Extensions and Pilot DimensionsVD WFA B

+.000-.002



ØB

ØNA

ØMM


FLATS

WF

VD

A

CKK


FLATS

WF

VD

ØB

ØNA

A

ØMM

C

KK


FLATSØMM

ØB

ØNA

WFA

VDCCC

(or AC*)





PA-2

A

NC

9R

od L

ock





1

2

3

4

WF

UV

ESQ.

TM TL

ØTD

XI

BDLG + STROKE

UM

TL

BoreØ

E TD +.000–.001

TL TM UM UV Style DD Minimum

Stroke1.50 2.00 1.000 1.00 2.50 4.50 2.50 3.252.00 2.50 1.000 1.00 3.00 5.00 3.00 4.002.50 3.00 1.000 1.00 3.50 5.50 3.50 3.883.25 3.75 1.000 1.00 4.50 6.50 4.25 4.384.00 4.50 1.000 1.00 5.25 7.25 5.00 4.885.00 5.50 1.000 1.00 6.25 8.25 6.00 5.136.00 6.50 1.375 1.38 7.63 10.38 7.00 6.138.00 8.50 1.375 1.38 9.75 12.50 9.50 6.50

1.50 0.625 1/2-20 7/16-20 0.75 1.13 1.124 0.38 0.50 0.56 0.38 1.00 6.50 9.000.625 1/2-20 7/16-20 0.75 1.13 1.124 0.38 0.50 0.56 0.38 1.00 6.81 9.941.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 7.81 11.310.625 1/2-20 7/16-20 0.75 1.13 1.124 0.38 0.50 0.56 0.50 1.00 6.94 9.941.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 8.06 11.441.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 9.13 12.501.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.63 1.63 9.50 13.131.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 9.50 13.381.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.75 1.63 9.75 13.881.750 1 1/2-12 1 1/4-12 2.00 3.00 2.374 0.75 1.50 1.69 0.88 1.88 10.13 14.501.000 7/8-14 3/4-16 1.13 1.88 1.499 0.50 0.88 0.94 0.50 1.38 10.38 14.501.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.75 1.63 10.75 15.131.750 1 1/2-12 1 1/4-12 2.00 3.00 2.374 0.75 1.50 1.69 0.88 1.88 11.38 16.001.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.75 1.63 11.88 16.751.750 1 1/2-12 1 1/4-12 2.00 3.00 2.374 0.75 1.50 1.69 0.88 1.88 12.38 17.502.000 1 3/4-12 1 1/2-12 2.25 3.50 2.624 0.88 1.69 1.94 1.25 2.00 12.50 17.751.375 1 1/4-12 1-14 1.63 2.50 1.999 0.63 1.13 1.31 0.75 1.63 12.38 17.631.750 1 1/2-12 1 1/4-12 2.00 3.50 2.374 0.75 1.50 1.69 0.88 1.88 12.88 18.382.500 2 1/4-12 1 7/8-12 3.00 4.50 3.124 1.00 2.06 2.38 1.38 2.25 13.25 19.13

LGAdd

Stroke

XI†Minimum

C D NA VD WFB+.000-.002

BoreØ

ThreadCC

Style4 & 5*

KKStyle2 & 3

MMRod

ØAC*

Rod Extensions and Pilot DimensionsA

2.00

6.00

8.00

4.00

5.00

2.50

3.25

† Dimension XI to be specified by customer. If a shorter than minimum XI is required, the MT1 Mount on page 103 may be suitable.



ØB

ØNA

ØMM


FLATS

WF

VD

A

CKK


FLATS

WF

VD

ØB

ØNA

A

ØMM

C

KK


FLATSØMM

ØB

ØNA

WFA

VDCCC

(or AC*)



Catalog SB0106-7



Double Rod Cylinder Dimension Drawings

How to Use Double Rod Cylinder Dimension DrawingsTo determine dimensions for a double rod cylinder, first refer to the desired single rod mounting style cylindershown on preceding pages of this catalog. After selecting necessary dimensions from that drawing, return to this page and supplement the single rod dimensions with those shown in the drawings and dimension table below. Note that double rod cylinders have a head (Dim. G) at both ends and that dimension LD replaces LG.

The double rod dimensions differ from, or are in addition

to those for single rod cylinders shown on preceding pages and provide the information needed to completely dimension a double rod cylinder.

On a double rod cylinder, where the two rod ends are different, be sure to clearly state which rod end is to beassembled at which end. Port position #1 is standard. If other than standard, specify port position #2, 3 or 4 asviewed from one end only.

11/2" to 6" Bores

Mounting Styles for Single Rod

Models

CorrespondingMounting Stylesfor Double Rod

Models

MX0 MDX0

MX3 MDX3

MX1 MDX1

MF1 MDF1

MS2 MDS2

MS4 MDS4

MT1 MDT1

MT4 MDT4

EEP + STROKE

ZM + 2 X STROKE

ROD END #1 ROD END #2

ØMM

G G F

LD + STROKE

Y

8" BoreP + STROKE

G G F

ZM + 2 X STROKE

Y

LD + STROKE

EE

ØMM

ROD END #2ROD END #1

Add 2X Stroke

LD SSK ZM1.50 0.625 3/8 0.38 1.50 2.25 4.81 7.38 2.88 9.00

0.625 3/8 0.38 1.50 2.25 5.13 7.69 2.88 9.311.000 3/8 0.38 1.50 2.25 6.50 8.69 2.88 11.060.625 3/8 0.38 1.50 2.38 5.13 7.81 3.00 9.441.000 3/8 0.38 1.50 2.38 6.63 8.94 3.00 11.311.000 1/2 0.63 1.75 2.63 7.31 10.25 3.25 12.381.375 1/2 0.63 1.75 2.63 7.94 10.63 3.25 13.251.000 1/2 0.63 1.75 2.63 7.69 10.63 3.25 12.751.375 1/2 0.63 1.75 2.63 8.19 10.88 3.25 13.501.750 1/2 0.63 1.75 2.63 8.81 11.25 3.25 14.381.000 1/2 0.63 1.75 2.88 8.31 11.50 3.13 13.631.375 1/2 0.63 1.75 2.88 8.94 11.88 3.13 14.501.750 1/2 0.63 1.75 2.88 9.81 12.50 3.13 15.631.375 3/4 0.75 2.00 3.13 9.69 13.13 3.63 15.631.750 3/4 0.75 2.00 3.13 10.44 13.63 3.63 16.632.000 3/4 0.75 2.00 3.13 10.69 13.75 3.63 17.001.375 3/4 0.75 2.00 3.25 10.06 13.63 3.75 16.131.750 3/4 0.75 2.00 3.25 10.81 14.13 3.75 17.132.500 3/4 0.75 2.00 3.25 11.56 14.50 3.75 18.25

SSMS2

YG P Add StrokeBoreØ

MMRod

Ø

FEENPTF

Replaces DimensionOn Single Rod Mounting Style

2.00

6.00

8.00

4.00

5.00

2.50

3.25




PA-2

A

NC

9R

od L

ock

Rod Lock Removal & Installation

Rod Lock RemovalTo service the base NC9 or PA-2 Series cylinder the Rod Lock must first be removed.

Note: The Rod Lock cannot be serviced nor is it considered a service item. The NC9 or PA-2 cylinder must be returned to the factory for Rod Lock service.

1. Using a corner-to-corner sequence, remove the four hex tie rod nuts at the face of the Rod Lock.

2. Apply a minimum of 60 psi to the Rod Lock release port, or apply the appropriate torque to the manual override shaft to disengage the Rod Lock from the piston rod.

3. Carefully slide the Rod Lock off the cylinder. The Rod Lock is piloted and sealed to the gland OD which may necessitate carefully prying the unit from the gland retainer.

4. The NC9 or PA-2 cylinder can now be serviced per normal practice. See page 86 for NC9 Service Kits or pages C-34 and C-35 for PA-2 Service Kits.

Rod Lock Installation

1. Ensure that the mating surfaces of the Rod Lock and cylinder are free of dirt and debris.

2. Apply a minimum of 60 psi to the Rod Lock release port, or apply the appropriate torque to the manual override shaft to disengage the Rod Lock from the piston rod.

3. Carefully slide the rod lock onto the piston rod toward the base cylinder. Because the Rod Lock is sealed to the gland some force may be required to bring it in contact with the gland retainer. Take care not to damage to Rod Lock-to-gland o-ring seal.

4. Torque the hex tie rod nuts that secure the Rod Lock to the values in the table below. Be sure to reuse nuts supplied with the cylinder. Torque the nuts gradually, starting at one corner and work in a diagonal pattern to ensure evenness of tightening. DO NOT TORQUE ONE NUT COMPLETELY AND THEN THE OTHERS.

5. Remove air pressure from the Rod Lock release port or torque from the manual override release shaft to engage the Rod Lock.

1.50 60 – 70 in.- bs. 69 – 81 cm-kg2.00 11 – 12 ft.- bs. 15 – 16 N-m2.50 11 – 12 ft.- bs. 15 – 16 N-m3.25 25 – 26 ft.- bs. 34 – 35 N-m4.00 25 – 26 ft.- bs. 34 – 35 N-m5.00 60 – 64 ft.- bs. 81 – 87 N-m6.00 60 – 64 ft.- bs. 81 – 87 N-m8.00 110 – 114 ft.-lbs. 149 – 155 N-m

BoreØ

Tie Rod Torque


Catalog SB0106-7



When ordering NC-9 or PA-2 Series cylinders, please review the following:How to Order NC-9 or PA-2 Series Cylinders

Note: Duplicate cylinders can be ordered by giving the SERIAL NUMBER from the nameplate of the original cylinder. Factory records supply a quick positive identification.

Piston Rods: Specify model number code based on bore size and rod diameter. Give thread style number for a standard thread or specify dimensions. See “Style 0 Rod End” below.

Cushions: If cushions are required specify according to the model number on the next pages. If the cylinder is to have a double rod and only one cushion is required, be sure to specify clearly which end of the cylinder is to be cushioned.

Service PolicyOn cylinders returned to the factory for repairs, it is standard policy for the Industrial Cylinder Division to make such part replacements as will put the cylinder in as good as new condition. Should the condition of the returned cylinder be such that expenses for repair would exceed the costs of a new one, you will be notified.

Address all correspondence and make shipments to, Service Department at your nearest regional plant listed in the pages of this catalog.

Certified DimensionsSchrader Bellows guarantees that all cylinders ordered from this catalog will be built to dimensions shown. All dimensions are certified to be correct, and thus it is not necessary to request certified drawings.

Type 1 SealsType 1 seals are the seals provided as standard in a cylinder assembly unless otherwise specified. For further information on fluid compatibility or operating limitations of all components, see section C.

For the NC9 or PA-2 Series cylinders the following make-up Type 1 Seals:

Primary Piston Rod Seal – Nitrile with PTFE back-up washers Piston Rod Wiper – Nitrile Piston Seals – Nitrile with polymyte back-up washers O-Rings – Nitrile

Style 0 Rod EndA style 0 rod end indicates a special rod end configuration. All special piston rod dimensions must have all three: KK; A; and W/WF specified with the rod fully retracted. A sketch or drawing should be submitted for rod ends requiring special machining such as snap ring grooves, keyways, tapers, multiple diameters, etc. It is good design practice to have this machining done on a diameter at least 0.065 inches smaller than the piston rod diameter. This allows the piston rod to have a chamfer preventing rod seal damage during assembly or maintenance. Standard style 6 rod ends with a longer

than standard WG dimension should call out a style 0 rod end and the note: same as 6 except WG=____. A drawing should be submitted for special 6 rod ends that have specific tolerances or special radii. Special rod ends that have smaller than standard male threads, larger than standard female threads, or style 6 rod ends with smaller than standard AF or AE dimensions are to be reviewed by Engineering for proper strength at operating pressure.

Special Modifications: Additional information is required on orders for cylinders with special modifications. This is best handled with descriptive notes. For further information, consult factory.

Fluid Medium: NC-9 or PA-2 Series pneumatic cylinders are equipped with seals for use with lubricated air.

How to Order

Catalog SB0106-7 Pneumatic CylindersNC9 Series with Rod Lock



PA-2

A

NC

9R

od L

ock

2 Bore Size Rod Dia. Model No. Code 11/2" 5/8" A10

2" 5/8" B10 1" B11

21/2" 5/8" C10 1" C11

31/4" 1" D11 13/8" D12

4" 1" E11 13/8" E12 13/4" E13

5" 1" F11 13/8" F12 13/4" F13

6" 13/8" G12 13/4" G13 2" G14

8" 13/8" J12 13/4" J13 21/2" J15

How To Order By Model Number

NC-9 Pneumatic Cylinders with Rod Lock can be specified by model number by using the tables shown at right. SelectionsinboldtypeindicatecurrentFordstandard.

1. Type Select the Model Number Code which identifies single, double end.





6. Stroke Length It is necessary to specify the stroke length desired following the Model Number. For example: FAJA100851 with 6" stroke.


The Example Would Identify: A single end pneumatic cylinder with Rod Lock, 1-1/2" bore size, 5/8" piston rod diameter, side lug mount, cushioned both ends, with automotive male rod thread, Buna N Seals, and a 6" stroke.


1 Model NumberType Pneumatic Steel TubeSingleEndwithRodLockandNPTport FAJ

DoubleEndwithRodLockandNPTport FBJ

Single End with Rod Lock and SAE port NAJ

Double End with Rod Lock and SAE port NBJ

3 Model Number Code NFPA Non- Cush. Cush. Cush.Mounting Style Style Cush. Head Cap BothSideLug MS2 05 06 07 08

Side Tap MS4 13 14 15 16HeadRectangularFlange(11/2-8) MF1 21 22 23 24

CapRectangularFlange(11/2-6) MF2 25 26 27 28

CapSquare(8) ME4 41 42 43 44

TieRodsExtendedBothEnds MX1 53 54 55 56

TieRodsExtendedCapEnd MX2 57 58 59 60

TieRodsExtendedHeadEnd MX3 61 62 63 64

Head Trunnion MT1 69 70 71 72Cap Trunnion MT2 73 74 75 76IntermediateFixedTrunnion MT4 77 78 79 80

CapFixedClevis MP1 81 82 83 84

Spherical Bearing MPU3 89 90 91 92NO MOUNT MX0 93 94 95 96

4 Rod End Style Model Number Code Small Male 2 Short Female 3 Intermediate Male 4 AutomotiveMale 5Female Thread for Spherical Rod Eye 7 Special Specify 0

5 Seal Type Model Number Code BunaNSeals 1 Fluorocarbon Seals 2

6 Special Features S

Model NumberExample: FAJ A10 08 5 1 S W/6"Stroke


How to Order

Pneumatic CylindersPA-2 Series with Rod Lock



Catalog SB0106-7How to Order

How To Order By Model NumberPA-2 Pneumatic Cylinders with Rod Lock can be specified by model number by using the tables shown at right.

1. Type Select the Model Number Code which identifies single, double end or non-lube.





6. Stroke Length It is necessary to specify the stroke length desired following the Model Number. For example: PAJA101621 with 6" stroke.


The Example Would Identify: A single end pneumatic cylinder with Rod Lock, 1-1/2" bore size, 5/8" piston rod diameter, side tapped mount, cushioned both ends, with a small male rod thread, Buna N Seals, a 6" stroke.


Note: For special modifications other than piston rod ends use S in the tenth position of the model number and describe special features required.Example: PAJA101621S 6" Stroke

Cylinder to be Nickel Plated.

Model NumberExample:PAJ A10 16 2 1 W/6" Stroke

2 Bore Size Rod Dia. Model No. Code 11/2" 5/8" A10 2" 5/8" B10 1" B11 21/2" 5/8" C10 1" C11 31/4" 1" D11 13/8" D12 4" 1" E11 13/8" E12 13/4" E13 5" 1" F11 13/8" F12 13/4" F13 6" 13/8" G12 13/4" G13 2" G14 8" 13/8" J12 13/4" J13 21/2" J15

1 Model NumberType PA-2 Series PneumaticSingle End with Rod Lock PAJDouble End with Rod Lock PBJNon-Lube Single End with Rod Lock PNJNon-Lube Double End with Rod Lock PPJ

3 Model Number Code NFPA Non- Cush. Cush. Cush.Mounting Style Style Cush. Head Cap BothSide Lug MS2 05 06 07 08Side Tap MS4 13 14 15 16Head Rectangular Flange (11/2-8) MF1 21 22 23 24Cap Rectangular Flange (11/2-6) MF2 25 26 27 28Cap Square (8) ME4 41 42 43 44Tie Rods Extended Both Ends MX1 53 54 55 56Tie Rods Extended Cap End MX2 57 58 59 60Tie Rods Extended Head End MX3 61 62 63 64Head Trunnion MT1 69 70 71 72Cap Trunnion MT2 73 74 75 76Intermediate Fixed Trunnion MT4 77 78 79 80Cap Fixed Clevis MP1 81 82 83 84Spherical Bearing MPU3 89 90 91 92NO MOUNT MX0 93 94 95 96

4 Rod End Style Model Number Code Small Male 2 Short Female 3 Intermediate Male 4 Flange Coupling 6 Female Thread for Spherical Rod Eye 7 Special Specify 0

5 Seal Type* Model Number Code Buna N Seals 1 Fluorocarbon Seals 2


Catalog SB0106-7 Pneumatic CylindersPA-2 Series with Rod Lock



PA-2

A

NC

9R

od L

ock

Notes

NOTES

Pneumatic CylindersPA-2 Series with Rod Lock



Catalog SB0106-7Notes

NOTES

Documents

Industrial Cylinder Products - All · PDF fileaerospace climate control electromechanical ﬁltration ﬂuid & gas handling hydraulics pneumatics process control sealing & shielding