2
www.southwell.com.au IN SHAFT GOODS HOIST

IN SHAFT GOODS HOIST · epoxy, stainless steel, aluminium chequer plate, industrial grade vinyl. Doors – aluminium with viewing panel, steel, stainless steel, fire rated roller

  • Upload
    others

  • View
    9

  • Download
    0

Embed Size (px)

Citation preview

Page 1: IN SHAFT GOODS HOIST · epoxy, stainless steel, aluminium chequer plate, industrial grade vinyl. Doors – aluminium with viewing panel, steel, stainless steel, fire rated roller

www.southwell.com.au

IN SHAFT GOODS HOIST

Page 2: IN SHAFT GOODS HOIST · epoxy, stainless steel, aluminium chequer plate, industrial grade vinyl. Doors – aluminium with viewing panel, steel, stainless steel, fire rated roller

I N S H A F T G O O D S H O I S T

36 Edward St, Camden NSW Austral ia n PO Box 690 Camden NSW 2570 Austral iawww.southwell.com.au Freecall 1800 244 787 M 0418 966 282 T 61 2 4655 7007 E [email protected]

All Southwell hoists exceed the design and safety standard requirements of the Australian Standards and all WHS regulations

MODEL SGH-0909 SGH-1515 SGH-2018 SGH-2418 SGH-2424 SGH-3024

Platform (l x w) 0.9m x 0.9m 1.5m x 1.5m 2.0m x 1.8m 2.4m x 1.8m 2.4m x 2.4m 3.0m x 2.4mCapacity 350kg 1500kg 1000kg 1000kg 1500kg 1500kgShaft Length 970mm 1540mm 2040mm 2440mm 2440mm 3040mmShaft Width 1400mm 2000mm 2300mm 2300mm 3000mm 3000mm Pit Depth 90mm 125mm 125mm 125mm 195mm 195mmNote: Above measurement may vary for Goods Personnel Option. Contact Southwell for details.

WARRANTY 1 year full warranty and 10 year structural warranty

M A I N D I M E N S I O N S

Benefits

● Cost effective alternative to a traditional lift● Ideal for sites with poor access for installation● Shaft can be designed to blend into the surrounding structures for applications where presentation is important● Minimal pit & overrun requirements ● Low maintenance costs ● Self diagnostic programmable logic control (PLC)

Options

● Goods Personnel Hoist with safety features to AS1735 Part 3, 12, 16 & BCA E3.6.● Walls and roof on platform – load protected during use● Roller shutters or gates on platform – loads fully enclosed during use

● Platform finishes - industrial enamel, 2 pack epoxy, stainless steel, aluminium chequer plate, industrial grade vinyl etc● Doors – aluminium with viewing panel, steel, stainless steel, fire rated roller shutters, with standard high duty cycle door motors, swing doors, fire rated swing doors● Doors can be same sides, opposite side or 90 degrees or walkthrough.● Additional doors for double entry/exit of hoist● 2 level, 3 level, 4 level or more.● Fabricated steel chequer plate ramp when pit is not possible● 12 metres per minute lift speed ● Twin mast self supporting units up to 10T capacity available.● Custom configurations & capacities available on request ● Free Standing Goods Hoist & Car Hoists also available.

XXXXXXXXXXXXXXXXXXXXXXXXXXX

XXXXXXXXXXXXXXXXXXXXXXXXXXX

XXXXXXXXXXXXXXXXXXXXXXXXXXX

XXXXXXXXXXXXXXXXXXXXXXXXXXX

XXXXXXXXXXXXXXXXXXXXXXXXXXX

XXXXXXXXXXXXXXXXXXXXXXXXXXX

XXXXXXXXXXXXXXXXXXXXXXXXXXX

XXXXXXXXXXXXXXXXXXXXXXXXXXX

Benefits

● Cost effective alternative to a traditional lift

● Ideal for sites with poor access for installation

● Shaft can be designed to blend into the surrounding structures for applications where presentation is important

● Minimal pit & overrun requirements

● Low maintenance costs

● Self diagnostic programmable logic control (PLC)

Options

● Walls and roof on platform – load protected during use

● Roller shutters or gates on platform – load fully enclosed during use

● Platform finishes - industrial enamel, 2 pack epoxy, stainless steel, aluminium chequer plate, industrial grade vinyl.

● Doors – aluminium with viewing panel, steel, stainless steel, fire rated roller shutters, continuous rated door motors, swing doors fire rated swing doors

● Doors same sides, opposite sides or 90 degrees

● Additional doors for double entry/exit of hoist

● 2 level, 3 level or 4 level

● Fabricated steel ramp when pit is not possible

● 12 metres per minute lift speed

● Twin mast self supporting units where no shaft structure is available

● Custom configurations & capacities available on request

MODEL SGH-0909 SGH-1515 SGH-2018 SGH-2418 SGH-2424 SGH-3024

Platform (l x w) 0.9m x 0.9m 1.5m x 1.5m 2.0m x 1.8m 2.4m x 1.8m 2.4m x 2.4m 3.0m x 2.4mCapacity 350kg 1500kg 1000kg 1000kg 1500kg 2000kgShaft Length 970mm 1540mm 2040mm 2440mm 2440mm 3040mmShaft Width 1400mm 2000mm 2300mm 2300mm 3000mm 3000mmPit Depth 90mm 125mm 125mm 125mm 195mm 195mm

WARRANTY 3 years full warranty and 10 year structural warranty (subject to service agreement with Southwell Lifts & Hoists)

www.southwell.com.au T (02) 4655 7007 F 4655 9134 E sales@southwell .com.au

I N S H A F T G O O D S H O I S T

All Southwell hoists exceed the design and safety standard requirements of the Australian Standards and all OH&S regulations