Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
Reflect™
I M P L A N T S Y S T E M S
joel a. gonzales rdahead of clinical affairsids implants
e. [email protected]. 480-440-3927
for more information please contact:
2 idsimplants.com 866-277-5662
Featured in this brochure is our full line of Reflect™ Implant Systems. Reflect offers surgical and prosthetic compatibility with well-known implant products and does so at a fraction of the cost; while at the same time offering uncompromised quality and performance.
Reflect™ Implants are manufactured with a state-of-the-art surface treatment procedure that creates macro, micro, and nano surface structures that increase the bone to implant contact (BIC). The sand-blasting, acid etching, and extensive cleaning (S-L-A) of the Reflect surface achieves ideal morphology for osseointegration. The cleaning process also removes undesired residues deriving from processing (fig 1); yielding contamination-free surfaces that generate stable titanium-oxide layer enhancing osseointegration (fig 2). Manufactured from our Super Ti5, Reflect™ Implants provide greater strength over implants manufactured with Grade 4 Titanium. Studies show a high degree of cellular proliferation encouraging osseointegration* with SuperTi5.
Surface Analysis By X-ray Photoelectron Spectroscopy (XPS)Reflect™ Implant’s cleaning process generates stable titanium-oxide layer that chemically stabilizes the implant surface. The layer’s optimal thickness, of 3-4 nm, attracts body fluids without concealing surface morphology, thus promoting bone healing. The purpose of the surface analysis by X-ray Photoelectron Spectroscopy (XPS) to assess the Reflect Implant surface in order to verify that any substances used in the process have been washed from the surface and no undesirable particles remained.
Reflect Implant XPS atomic concentrations (%)
Reflect Implant C Ti O Al V Ca N P S Na Cl K Si
1 32.24 13.73 47.72 2.29 0.46 0.38 0.69 0.54 0.48 0.54 0.65 - 0.27
2 34.36 12.84 45.50 3.06 0.44 - 0.91 0.73 0.47 0.18 0.35 0.45 0.71
Results*As can be seen from the above results, the undesirable contaminations that may be related to water residuals and processing remains such as Ca, N, Zn, Na P, S, Cl, and Si are absent or very low for Reflect Implants. Carbon layer that may be associated with processing detergents lies well below the acceptance level of 40%.
* XPS examination was performed in Solid State Physics Institute, Technion research and development foundation.
More for you. More for your patients.
figure 1 — Implant surface of Competitor
figure 2 — Reflect Implant surface
3 idsimplants.com 866-277-5662
• S-L-A surface provides high degree of cleanliness and osseointegration
• Surgically and prosthetically compatible with Noble Biocare® Noble Active®
• Internal conical connection for abutment-supported restorations and Multi Unit abutments for long span bridges and bars
• Digital and stock prosthetic solutions available
• Strong conical connection
• Internal conical connection with hexagonal interlocking offers secure positioning of abutments
• Thread design offers high initial stability
• Optimal prosthetic orientation and minimally invasive insertion
Reflect™
Rapid I M P L A N T S Y S T E M
Refle
ct
RA
PID
IMP
LA
NT
SY
ST
EM
Item No. Description
RA3585 Reflect Rapid Implant Fixture 3.5mm Diameter, 8.5 Length
RA3510 Reflect Rapid Implant Fixture 3.5mm Diameter, 10 Length
RA3511 Reflect Rapid Implant Fixture 3.5mm Diameter, 11.5 Length
RA3513 Reflect Rapid Implant Fixture 3.5mm Diameter, 13 Length
RA3515 Reflect Rapid Implant Fixture 3.5mm Diameter, 15 Length
RA4385 Reflect Rapid Implant Fixture 4.3mm Diameter, 8.5 Length
RA4310 Reflect Rapid Implant Fixture 4.3mm Diameter, 10 Length
RA4311 Reflect Rapid Implant Fixture 4.3mm Diameter, 11.5 Length
RA4313 Reflect Rapid Implant Fixture 4.3mm Diameter, 13 Length
RA4315 Reflect Rapid Implant Fixture 4.3mm Diameter, 15 Length
RA5085 Reflect Rapid Implant Fixture 5.0mm Diameter, 8.5 Length
RA5010 Reflect Rapid Implant Fixture 5.0mm Diameter, 10 Length
RA5011 Reflect Rapid Implant Fixture 5.0mm Diameter, 11.5 Length
RA5013 Reflect Rapid Implant Fixture 5.0mm Diameter, 13 Length
RA5015 Reflect Rapid Implant Fixture 5.0mm Diameter, 15 Length
Implant Fixtures
4 idsimplants.com 866-277-5662
Reflect™
Rapid I M P L A N T S Y S T E M Compatible with: Nobel Biocare® NobelActive®
Item No. Description
RAHAS3N Reflect Rapid Healing Abutment 3.5 mmD x 3 mmH NP
RAHAS3R Reflect Rapid Healing Abutment 4.3 mmD x 3 mmH RP
RAHAS5N Reflect Rapid Healing Abutment 3.5 mmD x 5 mmH NP
RAHAS5R Reflect Rapid Healing Abutment 4.3 mmD x 5 mmH RP
RAHAF3N Reflect Rapid Healing Abutment 4.7 mmD x 3 mmH NP
RAHAF3R Reflect Rapid Healing Abutment 5.7 mmD x 3 mmH RP
RAHAF5N Reflect Rapid Healing Abutment 4.7 mmD x 5 mmH NP
RAHAF5R Reflect Rapid Healing Abutment 5.7 mmD x 5 mmH RP
RRSAANP Reflect Rapid Clinical Scanning Abutment, Anterior, NP
RRSAARP Reflect Rapid Clinical Scanning Abutment, Anterior, RP
RRSAPNP Reflect Rapid Clinical Scanning Abutment, Posterior, NP
RRSAPRP Reflect Rapid Clinical Scanning Abutment, Posterior, RP
Healing Abutments
Clinical Scanning Abutments
Refle
ct
RA
PID
IMP
LA
NT
SY
ST
EM
5 idsimplants.com 866-277-5662
Reflect™
Rapid I M P L A N T S Y S T E M Compatible with: Nobel Biocare® NobelActive®
Item No. Description
RACICSN Reflect Rapid Closed-Tray Transfer 3.5 mmD NP
RACICSR Reflect Rapid Closed-Tray Transfer 4.3 mmD RP
RACICFN Reflect Rapid Closed-Tray Transfer 4.7 mmD NP
RACICFR Reflect Rapid Closed-Tray Transfer 5.7 mmD RP
RAOICSN Reflect Rapid Open-Tray Transfer 3.5 mmD NP
RAOICSR Reflect Rapid Open-Tray Transfer 4.3 mmD RP
RAOICFN Reflect Rapid Open-Tray Transfer 4.7 mmD NP
RAOICFR Reflect Rapid Open-Tray Transfer 5.7 mmD RP
Closed-Tray Transfers
Open-Tray Transfers
(Open-Tray Transfers include Titanium Guide Pin)
(Closed-Tray Transfers include Titanium Guide Pin)
46 idsimplants.com 866-277-5662
Reflect™
Rapid I M P L A N T S Y S T E M Compatible with: Nobel Biocare® NobelActive®
Item No. Description
RAIANP Reflect Rapid Implant Analog NP
RAIARP Reflect Rapid Implant Analog RP
RABVCENP Reflect Rapid Bite Verification Cylinder Engaging NP
RABVCERP Reflect Rapid Bite Verification Cylinder Engaging RP
RABVNENP Reflect Rapid Bite Verification Cylinder Non-Engaging NP
RABVNERP Reflect Rapid Bite Verification Cylinder Non-Engaging RP
RATA45NP Reflect Rapid Titanium Abutment 4.5 mmH NP
RATA45RP Reflect Rapid Titanium Abutment 4.5 mmH RP
RATA60NP Reflect Rapid Titanium Abutment 6 mmH NP
RATA60RP Reflect Rapid Titanium Abutment 6 mmH RP
Implant Analogs
Bite Verification Cylinders
Titanium Abutments
(Bite Verification Cylinders include Titanium Screw and Guide Pin)
(Abutment Screws are sold separately)
57 idsimplants.com 866-277-5662
Reflect™
Rapid I M P L A N T S Y S T E M Compatible with: Nobel Biocare® NobelActive®
Refle
ct
RA
PID
IMP
LA
NT
SY
ST
EM
Item No. Description
RATE15NP Reflect Rapid Esthetic Abutment 3 mmH, Anterior 15° NP
RATE1ARP Reflect Rapid Esthetic Abutment 3 mmH, Anterior 15° RP
RATE1PRP Reflect Rapid Esthetic Abutment 3 mmH, Posterior 15° RP
RATESANP Reflect Rapid Esthetic Abutment 3 mmH, Anterior, Straight NP
RATESARP Reflect Rapid Esthetic Abutment 3 mmH, Anterior, Straight RP
RAUCENNP Reflect Rapid UCLA Plastic Abutment Engaging NP
RAUCENRP Reflect Rapid UCLA Plastic Abutment Engaging RP
RAUCNENP Reflect Rapid UCLA Plastic Abutment Non-Engaging NP ”
RAUCNERP Reflect Rapid UCLA Plastic Abutment Non-Engaging RP
Titanium Esthetic Abutments
UCLA Plastic Abutments
(Esthetic Abutments include Titanium Screw)
(UCLA Abutments include Titanium Screw and Guide Pin)
8 idsimplants.com 866-277-5662
Reflect™
Rapid I M P L A N T S Y S T E M Compatible with: Nobel Biocare® NobelActive®
Multi-Unit Abutments
Titanium Blanks
Item No. Description
RATS00NP Reflect Rapid Titanium Screw NP
RATS00RP Reflect Rapid Titanium Screw RP
RAGP20NP Reflect Rapid Guide Pin Implant Level 20 mm NP (5-Pack)
RAGP20RP Reflect Rapid Guide Pin Implant Level 20 mm RP (5-Pack)
RATBNP Reflect Rapid Titanium Blank NP
RATBRP Reflect Rapid Titanium Blank RP
RA1725NP Reflect Rapid 17° Multi-Unit Abutment 2.5 mmH NP
RA1735NP Reflect Rapid 17° Multi-Unit Abutment 3.5 mmH NP
RA1725RP Reflect Rapid 17° Multi-Unit Abutment 2.5 mmH RP
RA1735RP Reflect Rapid 17° Multi-Unit Abutment 3.5 mmH RP
RA3035NP Reflect Rapid 30° Multi-Unit Abutment 3.5 mmH NP
RA3045NP Reflect Rapid 30° Multi-Unit Abutment 4.5 mmH NP
RA3035RP Reflect Rapid 30° Multi-Unit Abutment 3.5 mmH RP
RA3045RP Reflect Rapid 30° Multi-Unit Abutment 4.5 mmH RP
Titanium Screws and Guide Pins
(Multi-Unit Abutments include Titanium Screw)
9 idsimplants.com 866-277-5662
Reflect™
Rapid I M P L A N T S Y S T E M Compatible with: Nobel Biocare® NobelActive®
Refle
ct
RA
PID
IMP
LA
NT
SY
ST
EM
Item No. Description
RAMU15NP Reflect Rapid Multi-Unit Abutment 1.5 mmH NP
RAMU25NP Reflect Rapid Multi-Unit Abutment 2.5 mmH NP
RAMU35NP Reflect Rapid Multi-Unit Abutment 3.5 mmH NP
RAMU15RP Reflect Rapid Multi-Unit Abutment 1.5 mmH RP
RAMU25RP Reflect Rapid Multi-Unit Abutment 2.5 mmH RP
RAMU35RP Reflect Rapid Multi-Unit Abutment 3.5 mmH RP
RAMU45RP Reflect Rapid Multi-Unit Abutment 4.5 mmH RP
RMUHC Reflect Multi-Unit Temporary Healing Cap
RMUAD Reflect Multi-Unit Abutment Driver
Multi-Unit Abutments
10 idsimplants.com 866-277-5662
• Surgically and prosthetically compatible with Zimmer® Tapered Screw Vent®
• S-L-A surface provides high degree of osseointegration
• Unique surface treatment and cleaning process encourage osseointegration
• Full line of prosthetic components for single tooth restorations and Multi Unit abutments for long span bridges and bars
• Well documented internal hex connection
• Tapered design allows placement between convergent roots and in immediate extraction sites
Reflect™
Tapered Screw I M P L A N T S Y S T E M
Item No. Description
RT3708 Reflect Tapered Screw Implant Fixture 3.7mm Diameter, 8 Length
RT3710 Reflect Tapered Screw Implant Fixture 3.7mm Diameter, 10 Length
RT3711 Reflect Tapered Screw Implant Fixture 3.7mm Diameter, 11.5 Length
RT3713 Reflect Tapered Screw Implant Fixture 3.7mm Diameter, 13 Length
RT3716 Reflect Tapered Screw Implant Fixture 3.7mm Diameter, 16 Length
RT4108 Reflect Tapered Screw Implant Fixture 4.1mm Diameter, 8 Length
RT4110 Reflect Tapered Screw Implant Fixture 4.1mm Diameter, 10 Length
RT4111 Reflect Tapered Screw Implant Fixture 4.1mm Diameter, 11.5 Length
RT4113 Reflect Tapered Screw Implant Fixture 4.1mm Diameter, 13 Length
RT4116 Reflect Tapered Screw Implant Fixture 4.1mm Diameter, 16 Length
RT4708 Reflect Tapered Screw Implant Fixture 4.7mm Diameter, 8 Length
RT4710 Reflect Tapered Screw Implant Fixture 4.7mm Diameter, 10 Length
RT4711 Reflect Tapered Screw Implant Fixture 4.7mm Diameter, 11.5 Length
RT4713 Reflect Tapered Screw Implant Fixture 4.7mm Diameter, 13 Length
Implant Fixtures
11 idsimplants.com 866-277-5662
R
efle
ct
TA
PE
RE
D S
CR
EW
IMP
LA
NT
SY
ST
EM
Item No. Description
RTHAS333 Reflect Tapered Healing Abutment 3.5 Platform x 3.5 mmD x 3 mmH
RTHAS443 Reflect Tapered Healing Abutment 4.5 Platform x 4.5 mmD x 3 mmH
RTHAS335 Reflect Tapered Healing Abutment 3.5 Platform x 3.5 mmD x 5 mmH
RTHAS445 Reflect Tapered Healing Abutment 4.5 Platform x 4.5 mmD x 5 mmH
RTHAF343 Reflect Tapered Healing Abutment 3.5 Platform x 4.7 mmD x 3 mmH
RTHAF453 Reflect Tapered Healing Abutment 4.5 Platform x 5.7 mmD x 3 mmH
RTHAF345 Reflect Tapered Healing Abutment 3.5 Platform x 4.7 mmD x 5 mmH
RTHAF455 Reflect Tapered Healing Abutment 4.5 Platform x 5.7 mmD x 5 mmH
RTSAA3 Reflect Tapered Implant Clinical Scanning Abutment, Anterior, 3.5 mm
RTSAA4 Reflect Tapered Implant Clinical Scanning Abutment, Anterior, 4.5 mmP
RTSAP3 Reflect Tapered Implant Clinical Scanning Abutment, Posterior, 3.5 mm
RTSAP4 Reflect Tapered Implant Clinical Scanning Abutment, Posterior, 4.5 mmP
Healing Abutments
Reflect™ Tapered Screw I M P L A N T S Y S T E M Compatible with: Zimmer® Dental Tapered Screw-Vent®
Clinical Scanning Abutments
12 idsimplants.com 866-277-5662
Refle
ct
TA
PE
RE
D S
CR
EW
IMP
LA
NT
SY
ST
EM
Item No. Description
RTCIC33 Reflect Tapered Closed-Tray Transfer 3.5 Platform x 3.5 mmD x 10 mmH
RTCIC44 Reflect Tapered Closed-Tray Transfer 4.5 Platform x 4.5 mmD x 10 mmH
RTCIC34 Reflect Tapered Closed-Tray Transfer 3.5 Platform x 4.7 mmD x 10 mmH
RTCIC45 Reflect Tapered Closed-Tray Transfer 4.5 Platform x 5.7 mmD x 10 mmH
RTOIC33 Reflect Tapered Open-Tray Transfer 3.5 Platform x 3.5 mmD x 10 mmH
RTOIC44 Reflect Tapered Open-Tray Transfer 4.5 Platform x 4.5 mmD x 10 mmH
RTOIC34 Reflect Tapered Open-Tray Transfer 3.5 Platform x 4.7 mmD x 10 mmH
RTOIC45 Reflect Tapered Open-Tray Transfer 4.5 Platform x 5.7 mmD x 10 mmH
Open-Tray Transfers
Closed-Tray Transfers
Reflect™ Tapered Screw I M P L A N T S Y S T E M Compatible with: Zimmer® Dental Tapered Screw-Vent®
(Open-Tray Transfers Include Guide Pin)
(Closed-Tray Transfers Include Guide Pin)
13 idsimplants.com 866-277-5662
Item No. Description
RTIA35 Reflect Tapered Implant Analog 3.5 Platform
RTIA45 Reflect Tapered Implant Analog 4.5 Platform
RTEN35 Reflect Tapered Bite Verification Cylinder Engaging 3.5 Platform
RTEN45 Reflect Tapered Bite Verification Cylinder Engaging 4.5 Platform
RTNE35 Reflect Tapered Bite Verification Cylinder Non-Engaging 3.5 Platform
RTNE45 Reflect Tapered Bite Verification Cylinder Non-Engaging 4.5 Platform
RT4535 Reflect Tapered Titanium Abutment 3.5 Platform x 4.5 mmH
RT4545 Reflect Tapered Titanium Abutment 4.5 Platform x 4.5 mmH
RT0635 Reflect Tapered Titanium Abutment 3.5 Platform x 6 mmH
RT0645 Reflect Tapered Titanium Abutment 4.5 Platform x 6 mmH
Ti Screw sold separately
Implant Analogs
Bite Verification Cylinders
Titanium Abutments
Reflect™ Tapered Screw I M P L A N T S Y S T E M Compatible with: Zimmer® Dental Tapered Screw-Vent®
(Bite Verification Cylinders include Titanium Screw and Guide Pin)
Refle
ct
TA
PE
RE
D S
CR
EW
IMP
LA
NT
SY
ST
EM
14 idsimplants.com 866-277-5662
Item No. Description
RTLAEN35 Reflect Tapered UCLA Plastic Abutment Engaging 3.5 Platform
RTLAEN45 Reflect Tapered UCLA Plastic Abutment Engaging 4.5 Platform
RTLANE35 Reflect Tapered UCLA Plastic Abutment Non-Engaging 3.5 Platform
RTLANE45 Reflect Tapered UCLA Plastic Abutment Non-Engaging 4.5 Platform
RTTS35 Reflect Tapered Titanium Screw
RTGP50 Reflect Tapered Guide Pin (5-Pack)
RTTB35 Reflect Tapered Titanium Blank 3.5mm
RTTB45 Reflect Tapered Titanium Blank 4.5mm
UCLA Plastic Abutments
Titanium Screws and Guide Pins
Titanium Blanks
Reflect™ Tapered Screw I M P L A N T S Y S T E M Compatible with: Zimmer® Dental Tapered Screw-Vent®
(UCLA Abutments include Titanium Screw and Guide Pin)
15 idsimplants.com 866-277-5662
Refle
ct
TA
PE
RE
D S
CR
EW
IMP
LA
NT
SY
ST
EM
Item No. Description
RT3501 Reflect Tapered Multi-Unit Abutment, 3.5 Platform x 1 mmH
RT3502 Reflect Tapered Multi-Unit Abutment, 3.5 Platform x 2 mmH
RT4501 Reflect Tapered Multi-Unit Abutment, 4.5 Platform x 1 mmH
RT4502 Reflect Tapered Multi-Unit Abutment, 4.5 Platform x 2 mmH
RT4503 Reflect Tapered Multi-Unit Abutment, 4.5 Platform x 3 mmH
RT4505 Reflect Tapered Multi-Unit Abutment, 4.5 Platform x 5 mmH
RT173502 Reflect Tapered 17° Multi-Unit Abutment, 3.5 Platform x 2 mmH
RT173503 Reflect Tapered 17° Multi-Unit Abutment, 3.5 Platform x 3 mmH
RT174502 Reflect Tapered 17° Multi-Unit Abutment, 4.5 Platform x 2 mmH
RT174503 Reflect Tapered 17° Multi-Unit Abutment, 4.5 Platform x 3 mmH
RT174505 Reflect Tapered 17° Multi-Unit Abutment, 4.5 Platform x 5 mmH
RT303503 Reflect Tapered 30° Multi-Unit Abutment, 3.5 Platform x 3 mmH
RT304503 Reflect Tapered 30° Multi-Unit Abutment, 4.5 Platform x 3 mmH
RT304505 Reflect Tapered 30° Multi-Unit Abutment, 4.5 Platform x 5 mmH
Multi-Unit Abutments
Reflect™ Tapered Screw I M P L A N T S Y S T E M Compatible with: Zimmer® Dental Tapered Screw-Vent®
(Multi-Unit Abutments include Titanium Screw)
16 idsimplants.com 866-277-5662
Multi-unit abutment system common restorative components. The Reflect™
Multi-Unit Abutment System has common restorative components across all Reflect Implant Systems. The components below can be used with all Reflect Implant Multi-Unit abutments. No matter if there are different Reflect implants in an arch, the Reflect™
Multi-Unit Abutment System universalizes the restorative platform. The Reflect™
Multi-Unit Abutments come packaged with the Abutment screw that matches the system screw. The Prosthetic Screw is not included and needs to be ordered separately. The Reflect Multi-Unit Scan abutment, Ti Temporary Abutment and Multi-Unit Healing cap require .050 hex driver.
Reflect™
Multi-Unit A B U T M E N T S Y S T E M
17 idsimplants.com 866-277-5662
Refle
ct
MU
LT
I-UN
IT A
BU
TM
EN
T S
YS
TE
MR
efle
ct
MU
LT
I-UN
IT A
BU
TM
EN
T S
YS
TE
M
Reflect™ Multi-Unit A B U T M E N T S Y S T E M
Item No. Description
RMUAA Reflect Multi-Unit Abutment Analog
RMUGP50 Reflect Multi-Unit Guide Pin .050” Hex
RMUICC Reflect Multi-Unit Impression Coping, Closed-Tray
RMUICO Reflect Multi-Unit Impression Coping, Open-Tray
RMURPSUD Reflect Rapid Multi-Unit Prosthetic Screw
RMUPS50 Reflect Multi-Unit Prosthetic Screw .050” Hex
RMUSA Reflect Multi-Unit Scan Abutment
RMUTT Reflect Multi-Unit Titanium Temporary
RMUHC Reflect Multi-Unit Temporary Healing Cap
RMUAD Reflect Multi-Unit Abutment Driver
18 idsimplants.com 866-277-5662
Reflect Implant Surface Treatment
For fast and predictable osseointegration, Reflect Implant’s surface treatment consists of sand-blasting, acid etching (S-L-A) and extensive cleaning. This process achieves a highly desirable combined outcome of a uniquely cleaned implant surface with ideal morphology for accelerated integration. Compared to other surface treatments available today such as the TiUnite® which is a highly anodized surface treatment or the resorbable blast media (RBM) surface like the Zimmer® Dental MTX™ surface, S-L-A surfaces are considered the “Gold Standard” in the dental implant industry.
TiUnite® is highly anodized Ti producing a textured surface to accommodate osseointegration. The tubules are meant to provide area for cellular ingrowth. One implant company has applied this surface technology to their entire Grade 4 Ti implant line.
Zimmer Dental’s MTX™ surface is a non-coated, microtextured surface created by grit-blasting with hydroxylapatite particles, followed by a cleaning in non-etching acid and distilled water baths to remove residual blasting material. This surface is commonly known as RBM surface treatment that is used on most Grade 5 Ti implants.
TiUnite® is a registered trademark of Nobel Biocare® Mtx ™ is a registered trademark of Zimmer® Dental
Surface Treatment Comparisons
19 idsimplants.com 866-277-5662
ids will replace any ids implant fixture and prosthetic part of any of our implant systems if you are not satisfied in any way with its performance. No ifs ands or buts!
The warranty is for the life of the patient should there be a failure to integrate pre or post prosthetic. In our commitment to continuous improvement of our products and services, we ask you please help us understand and investigate the possible reasons you are not satisfied or the integration failure by sending us the following:
Return the failed product in an autoclaved pouch. •˃Plastic products should be cold sterilized. •˃Include your name and contact information. •˃ Product Reference #, Lot #, Serial #, date it was placed and date you
removed it.•˃Any pertinent patient information.•˃Pre and post op x-rays.
ids manufacturing design, tolerances and quality control exceed all international quality standards. We build them better, so we back them better and make it easy for you.
Tapered Screw-Vent is a registered trademark of Zimmer Dental Inc.NobelActive is a registered trademark of Nobel Biocare Inc.
ids Simple No Nonsense Lifetime Warranty
Reflect™ Implant’s multi-stage extensive cleaning process removes undesired residues deriving from processing, yielding contamination-free surface. That surface is then protected from contamination by packaging the implant in a Titanium sleeve and in contact with the Titanium cover screw. Our packaging assures that the implant is only in contact with Titanium until you remove it for surgical placement.
Reflect™
Implant P A C K A G I N G
300 Sylvan Avenue, Suite 104, Englewood Cliffs, NJ 07632 866-277-5662 idsimplants.com
Reflect™ I M P L A N T S Y S T E M S
RE
F710
15-R
0