• HIGH EFFICIENCY

• CUSTOMIZABLE CONFIGURATION

• LOW/ANNUAL MAINTENANCE

• LOWEST COST OF OWNERSHIP

• DIRECT DRIVE COUPLING SYSTEM FOR MAXIMUM EFFICIENCY AND MINIMUM MAINTENANCE

• PREMIUM EFFICIENT TEFC MOTOR

• 6 OR 18 PULSE 60 HERTZ VFD (NON-PROPRIETARY)

• SIMPLE / AFFORDABLE PLC CONTROL (UL508)

The Inovair IM-20 and IM-30 are the industry’s most flexible high efficiency blowers. Specifically designed to provide the lowest total cost of ownership with industry leading efficiency, unmatched reliability, and ease of maintenance, these blowers are the right choice for any municipality.

The compact IM-20’s low profile, vertical inlet, small footprint, and high effiiciency make it ideal for replacing less efficient blower technologies. Easy to maintain and operate, the ability to pass through a standard 36" man door and fit on most existing blower housekeeping pads also simplifies installation.

The IM-30 is the industry’s first truly modular blower design, able to be deployed as single units or in a stacked configuration. Each module in a stacked configuration can operate completely independently, allowing a redundant blower to be installed in the same footprint and reducing installation costs. Utilizing the standard weather resistant enclosure, the IM-30 can be installed outdoors, further reducing installation costs. With the same high efficiency seen in the IM-20, the IM-30 can dramatically reduce a plant’s capital and operating costs.

Thanks to the use of industry standard components such as premium efficient TEFC motors and non-proprietary 60 hertz VFD’s, the electrical complexity in Inovair blowers is substantially reduced compared to other high efficiency blower technologies. The low maintenace requirements for the IM Series are typically performed by plant personnel. As with all Inovair products the IM-20 and IM-30 are designed, built, and supported in the USA from our Midwest campus.

IM 20/30 SERIES20-250 HP

14801 W 114TH TERRACE, LENEXA, KS 66215 • (913) 469-7244 • 1-855-INOVAIR • INOVAIR.COM

0720

INVENTED, ENGINEERED

AND MADE IN THE USA

IM-30 SINGLE

IM-30 STACKEDIM-20

• Industry leading energy savings

• Greater process flexibility

• Up to 50% space savings

• Industry-standard components

• Low Noise (75-85 dBA)

IM-20 SERIES FEATURES

INOVAIR ADVANTAGES

TECHNICAL SPECS

72" 37 1/4"

55 3/4"

72 3/4" OPERATOR'S

PANELWITH HMI

21 1/4"

21 1/4"

47 1/4"

OPTIONAL LOCALAIR SOURCE,

FILTER SERVICE PANEL (REMOVABLE)

35"

ENCLOSURE VENTILATION INLET

RECOMMENDEDELECTRICAL

PENETRATIONS

36"

31 1/2" 12 1/2"

72 3/4" 9" 50 1/2"

26 3/4"

ENCLOSURE VENT OUTLET(MOTOR COOLING AND COMPRESSOR BYPASS 1/2" ANCHOR HOLES

(4 PLACES)

6" ANSI FLANGEEXPANSION JOINT

DISCHARGE(NON-LOAD BEARING)

OPTIONAL 10" ANSI FLANGE

EXPANSION JOINTREMOTE AIR INLET

(NON-LOAD BEARING)

OIL COOLER AIRFLOW OUTLET

REMOVABLE OIL SERVICE PANEL

3FT PERIMETER ACCESS

RECOMMENDED

Flow Capacity: 300-2500 SCFM

Design Pressure: Up to 22 psig

Turndown Ratio: 2:1

Motor Power: 20-125 HP

Drive: 6 or 18 Pulse 60 Hz VFD (local or remote mounted)

Input Power: 230V–575V, 60 Hz

Impeller: 5-axis machined 7075-T6 Aluminum

Control System: Advanced Integrated Controls

• Highly Efficient (~80% isentropic)

• Proven Integrally Geared Design

• Industry Standard Components

• Compact Design

• Maintenance-Friendly

• Engineered and Built in the USA

• Handles fluctuating pressures

• Capable of multiple start/stop cycles every hour

Also available without enclosure

For Reference Only

Flow Capacity: 300-2500 SCFM

Design Pressure: Up to 22 psig

Turndown Ratio: 2:1

Motor Power: 20-125 HP

Drive: 6 or 18 Pulse 60 Hz VFD (local or remote mounted)

Input Power: 230V–575V, 60 Hz

Impeller: 5-axis machined 7075-T6 Aluminum

Control System: Advanced Integrated Controls

• Industry-first modular blower design

• Up to 4:1 capacity turndown

• Greater process flexibility

• Up to 50% space savings

• Industry-standard components

• Low Noise (75-85 dBA)

• Available as stacked units, a single unit or without enclosure.

IM-30 SERIES FEATURES

INOVAIR ADVANTAGES

TECHNICAL SPECS

9'-0" 6'-8" 2'-4"

7'-8" 6'-5"

LESS ROOF 6'-11"

8" 7"

LOCAL HMI

4'-4"

2'-6"

2'-10"

4'-6"

2X BYPASS DISCHARGE VENT COVER (REMOTE

PIPING OPTIONAL)

MAINTENANCE ACCESS PANELS

120VAC/1PH AND CONTROL (1" NPT)

460VAC/3PH TO MOTOR FROM VFD (3" NPT)

FILTER ACCESS PANELS

100 OR 125HP ONLY

2X DISCHARGE TRANSITION

FROM 8" PIPE TO REQUIRED CHECK

VALVE NOT SHOWN (SIZE

VARIES BY APPLICATION)

SHOWN WITH INDOOR/OUTDOOR INTAKE VENT, REMOTE PIPED INTAKE AVAILABLE

(SIZE VARIES BY APPLICATION)

2X8" PIPE CLASS 150 EXPANSION

JOINT

Flow Capacity: 400–5200 scfm

Design Pressure: Up to 22 psig

Turndown Ratio: 4:1 (2:1 per module)

Motor Power: 40–125 HP (per module)

Drive: 6 or 18 Pulse 60 Hz VFD (remote mounted)

Input Power: 230V–575V, 60 Hz

Impeller: 5-axis machined 7075-T6 Aluminum

Control System: Advanced Integrated Controls

• Highly Efficient (~80% isentropic)

• Proven Integrally-geared Design

• Industry Standard Components

• Maintenance-friendly

• Engineered and Built in the USA

• Handles fluctuating pressures

• Capable of multiple start/stop cycles every hour

• Reduction in capital costs for stand-by units

Single unitavailable without enclosure

For Reference Only

INOVAIR: ENGINEERED AND BUILT IN THE USAInovair is the industrial products division of Accessible Technologies, Inc. The company was founded in 1994 to expand the application of high efficiency geared centrifugal blower technology within forced induction, aerospace, municipal and industrial applications. Inovair has been the worldwide leader for high performance compressors utilized in aircraft ground support equipment since 1998, is a leader in compact high efficiency blower packages for wastewater treatment, and also supplies blowers and compressors for a broad range of industrial applications. Highly efficient blower design, durable transmission design and space utilization are just a few hallmarks of the Inovair line of geared centrifugal blowers and compressors. All Inovair activities, including engineering, manufacturing and service, are performed in the USA.

η = EFFICIENCYHistorically, engineers world wide have utilized the Greek letter “Eta” (η) as the symbol for efficiency. Today, Iηovair brings this focus on efficiency to aerospace, municipal, and industrial markets with a line of highly efficient, innovative, quiet and compact blowers and compressors.

Thanks to our 25+ year history of centrifugal compressor leadership, the Inovair line of high performance blowers provides significant energy savings; 10% to over 45% when compared with typical positive displacement and multi-stage blowers. Inovair blowers also deliver superior durability and maintenance relative to air bearing turbo blowers, as well as lower capital cost. Inovair blowers feature the latest single stage centrifugal compressor designs, including proprietary impeller, transmission and control systems.

All Inovair products are designed, manufactured and serviced in our Kansas City headquarters campus. Inovair is the industrial products division of Accessible Technologies Inc, manufacturer of ProCharger superchargers.

14801 W 114TH TERRACE, LENEXA, KS 66215 • (913) 469-7244 • 1-855-INOVAIR • INOVAIR.COM

IM-30 SINGLEIM-20 IM-30 STACKED

IM 20