Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
- i -
Contents
Session 1: TOWARDS A SUSTAINABLE FUTURE
Plenary Session 1 - Industry Keynote Speaker: Jean Fayolle - Corporate Senior Vice President, Adhesive Technologies, Henkel ······················································· 3
Introduced by: Ramon Bacardit, Henkel
》 Session 1-Track 1: A&S Industry ChallengesModerator: Ansgar Van Halteren, Industrieverband Klebstoffe e.V. (IVK) / German Adhesives
Association
A History of Sustainable Development in the Adhesive Industry ···················· 17
Dr. Hermann Onusseit, Henkel, Germany
Sustainability – turning waste into reusable resources ······································· 54
Herwart Wilms, Managing Director, REMONDIS Assets & Services GmbH & Co. KG, Germany
Packaging Sustainability ································································································ 63
Michel Fontaine, Chairman, Conseil National de L´Emballage, France
》 Session 1-Track 2: Technologies for SustainabilityModerator : Andy Johnston, Ashland Performance Materials Inc.
Polyurethane adhesives and sealants and sustainable development ··············· 79
Shpresa Kotaji, Environmental Affairs Manager, Huntsman Polyurethanes, Belgium
Sustainability with Polyurethane Adhesives ····························································· 89
Heinz-Werner Lucas, Business Unit Coatings, Adhesives and Specialties, Bayer MaterialScience
AG, Germany
Using Waste CO2 to Create Novel Renewable Polyols for Adhesive Applications ··················································································································· 107
Jason M. Anderson, Director, Business Development, Novomer Inc., USA
- ii -
Butyl Ionomers: A New Generation of Functionalized Butyl Rubber Polymers with Improved Adhesive Properties ········································································ 117
Dr. Dana K. Adkinson, Senior Research Scientist, Global Research and Development Center,
Lanxess Inc, Canada
》 Session 1-Track 3: The Green Performance of Adhesives & SealantsModerator: Will R. Barclay, Geocel Ltd.
Factors affecting durability of sealants ·································································· 129
Patrick Vandereecken, Technical Manager, Construction Dep., Dow Corning Europe S.A.,
Belgium
An experimental study on structural properties of 4 sided structural sealant glazing system that was applied to glass facade for over 20 years ············ 137
Hisashi Ishii Ph.D., LIXIL Corp. Research Institute, Japan
The External Thermal Insulation Composite System – The Key Role Of The Adhesive ························································································································· 146
Marco Cerra, R&D Director, Vinavil S.p.A., Italy
Innovative Wooden Sleeper Repair Material – Innovative method for the repair of wooden sleepers using new sealants ··················································· 164
Hiromu Nagae, SHARP CHEMICAL IND. CO. LTD., Hankyu Corporation, Japan
- iii -
Session 2: THE TECHNOLOGY REVOLUTION
Plenary Session 2 - Industry Keynote Speaker: Bernard Pinatel, Chairman andCEO, BOSTIK ·················································································································· 175
Introduced by: Phil Derby, Vice President – Western Europe, BOSTIK – Vice President of Feica,
Member of the Feica Executive Board
》 Session 2-Track 1: State of the Art Silane Terminated Systems Moderator: Marco Cerra, R&D Director, Vinavil S.p.A.
Future trends in moisture curable silane polymer technology ······················· 189
Luc Peeters, R&D Manager, High Performance Polymer Division, Kaneka Belgium N.V., Belgium
Alpha-Hybrids for strong bonding applications ·················································· 197
Dr. Lars Zander, Wacker Chemie AG, Germany
Silylated Polyurethane Prepolymers For Elastic Adhesives ······························· 208
Thomas Lim, Principal Scientist, Adhesives and Sealants Momentive Performance Materials, USA
A new ground-breaking silane-modified polymer technology for innovative sealant and adhesive formulators ··········································································· 220
Melanie Roessing, Marketing Manager, TEGOPAC Evonik Industries AG, Germany
Development of Two-Component Telechelic Polyacrylate Sealant ················· 234
Yasushi Hatta, CEMEDINE CO.,LTD, Japan
》 Session 2-Track 2: The Edge of Hotmelt TechnologyModerator: Trevor Clarke, Pafra Adhesives Ltd.
Innovative Hot Melt Adhesive Solutions for “Hard-to-Bond” Substrates ····· 245
Selim Yalvac, Senior R&D Manager, Dow Elastomers, The Dow Chemical Company, USA
Novel High Melting Low Molecular Weight Maleated Polyethylenes for High Performance APAO and mEO Hot Melt Adhesives Systems ··························· 253
Kurt Severyns, Manager, Field Marketing, EMEA Honeywell International, Belgium
Understanding Oxidative and Thermal Degradation of Hot Melt Adhesives ·· 263
Dr. Jerrold Miller, Science and Technology Team Leader, Rosin Esters, Arizona Chemical, USA
- iv -
Low Melt Viscosity Hot Melt Adhesives Based on Radial Styrenic Block Copolymers ···················································································································· 271
Brian Witt, R&D Technical Manager, Dexco Polymers LP, USA
Continued Developments in Caustic Removable Hot Melt PSA Additives TBC·········································································································································· 280
Marie-Laure Daignieres, Development Manager-Adhesives & Sealants, France, CRAY VALLEY
Hydrocarbon Specialty Chemicals, France
》 Session 2-Track 3: New Building Blocks for Reactive SystemsModerator: Eva Griessbach, Dow Corning Europe S.A.
A Study of Fatigue Properties of Two-Component Acrylic Structural Adhesive·········································································································································· 291
Meina Du, R&D Project Manager, Beijing Tonsan Adhesive Co., Ltd, China
New high strength / high peel performance adhesive for composite bonding·········································································································································· 308
Philippe Jeantet, Technical Support Adhesives, HUNTSMAN Advanced Materials (Switzerland)
GmbH, Switzerland
Modern PUR Sealants & Adhesives: Superior Products Thanks to Novel Curing Technology ······································································································· 320
Dr. Steffen Maier, Department Manager R&D, Sika Technology AG Switzerland
UV cure in place foam gaskets ··············································································· 330
Kazuyoshi Sekita, R&D, Dept. Adhesives DIV, Nitta Gelatin Inc., Japan
New high performance tin free silicone adhesives and sealants ··················· 338
Dominique Canpont, R&D, Textile Coating and Elastomers Lab Manager, Bluestar Silicones,
France
》 Session 2-Track 4: Advanced Technologies for Improved PSA PropertiesModerator: Bruno Charriere, Bostik
Water-Soluble Pressure-Sensitive Adhesives based on Acrylics for Recyclable Products used in Paper and Metal Industry ························································ 349
Dr. Roland Milker, CEO, POLY-CHEM AG, Germany
- v -
Flexible Block Polyacrylics and Polyolefins in PSA ············································· 363
Akira Matsumoto, Product Manager, Kuraray Europe GmbH, Germany
Pressure-Sensitive-Adhesive In Future Frontier Technology ····························· 371
Prof. Hyun-Joong Kim, Seoul National University, Korea
Novel Acrylic Emulsion Pressure Sensitive Adhesive ·········································· 401
Jong Guo, Sr. Research Chemist, Momentive Specialty Chemicals, USA
Innovative solutions to overcome the limited availability and price increases of some traditional polymers ··················································································· 408
Dr. Walter Ramirez, Global Technology Director, Dynasol, Mexico
- vi -
Session 3: Secure Raw Material Sourcing
Plenary Session 3 - Industry Keynote Speaker: Dr. Urs Mader, Global R+D Manager, Sika ··············································································································· 427
Introduced by: Eric Dehasque, Area Manager Benelux/Nordic, SIKA – Member of the FEICA
Executive Board
》 Session 3-Track 1: Strategic OutlookModerator: Glenn Frommer, ADCO Products Inc.
New HSBC Technology for Modification of Amorphous Polyolefins – Cost Effective and More Sustainable Alternatives for Hygiene Hot Melt Adhesives·········································································································································· 439
Donn Dubois, Kraton Polymers Belgium sprl, Belgium
Strategic view on rosin supply – demand cycles and the impact on speculation ····················································································································· 447
Alessandro Visconti, Division Manager Pine Chemicals, Petrofer AG, Switzerland
Pressure-Sensitive Adhesive sourcing faces challenging changes – The perspective of a polymers specialist. ························································· 457
Dr. Soren Butz, Technical Service & Marketing Manager Functional Polymers, Synthomer Group,
Germany
》 Session 3-Track 2: Ways to bio-based Raw MaterialsModerator: Gerry Heebner, Arizona Chemicals
Bio-derived adhesives from renewable feedstocks ············································· 469
Prof. James Clark, Director, University of York, Green Chemistry Centre of Excellence, UK
New bio-based and environmental solutions for high-performance adhesives·········································································································································· 483
Dr. Angela Smits, Applications specialist, Croda Coatings & Polymers, Netherlands
Keep an eye on green solutions: Bio-based polyester polyols for reactive PUR Hot Melts ······················································································································· 493
Gabriele Brenner, Director Applied Technology Reactive Hot Melts, Evonik Industries AG,
Germany
- vii -
Dry blood powder based adhesive as a renewable and free formaldehyde alternative for wood industry. ·················································································· 502
Daniela Garcia, INTI-Caucho, Argentina
》 Session 3-Track 3: Innovative Alternatives for Raw Materials under PressureModerator: Heinz-Werner Lucas, Bayer MS
High Performance Sustainable Resins and Applications ··································· 511
Dr. Yuung-Ching Sheen, Manager, Material Chemical Laboratories (MCL), Industrial Technology
Research Institute (ITRI), Hsinchu, Taiwan
New Production Channels for Plant based Chemicals ······································ 522
Franck Thumerel, Business Development & Marketing Manager, ROQUETTE Biohub Program
Management, Roquette, France
New Dibenzoate Plasticizer Blends for Waterborne Applications ··················· 533
William D. Arendt, Research Fellow, Emerald Kalama Chemical, LLC, USA
》 Session 3-Track 4 : Innovation in Design and PerformanceModerator: Thomas Drustrup, Danish Coatings and Adhesives Association (DLF)
A Methodology of Adhesive Design Based on Structure-Rheology-Property- Performance Inter-relationship of Adhesive Material ········································· 553
Dr. Hsiao Ken Chuang, RD-VGM, Texyear Industries Inc., Taiwan
A new generation of polyamide rheology modifiers for cold manufacturing process of sealants ······································································································ 568
Germain Fauquet, Technical Service Europe, Arkema Group, France
New Propylene-based Elastomers for Hot Melt Adhesive (HMA) Applications·········································································································································· 576
Joseph M. DeLucia, Sales Representative – Adhesion Industry Business Unit, ExxonMobil
Chemical Company, USA
New Polymer Dispersion with Improved Adhesion on Difficult Surfaces ···· 584
Dr. Gerhard Kogler, Senior Manager Technical Service Adhesives Europe, Wacker Chemie AG,
Germany
- viii -
Session 4: Creating Va lue - Entrepreneurship ... Design ... Innovation
Plenary Session 4 - Industry Keynote Speaker: Jim Owens, Director, President and Chief Executive Officer, H.B. Fuller ································································· 599
Moderator : Mr. Steven Kenny, Senior Vice President, EIMEA, H.B. Fuller – Member of the
Feica Executive Board
》 Session 4-Track 1: Innovative Solutions for Adhesives and SealantsModerator: Selim Yalvac, DOW
Polyurethane – a Survival Chance for Medium Sized Adhesive Manufacturers·········································································································································· 627
Klaus Becker-Weimann, Managing Director & Partner, Klebchemie M.G. Becker GmbH & Co.
KG, Germany
Towards Innovative Adhesives for Safe Food Packaging-Strategies, Projects & Materials ························································································································· 635
Dr. Hermann Onussei, Industrieverband Klebstoffe e.V. (IVK) - German Adhesives Association -
Technical Committee for Paper and Packaging Adhesives (TKPV), Germany
Migration studies of adhesives based on Vinyl Acetate Ethylene (VAE) copolymers intended for the food packaging industry ···································· 668
Dr. Meike Roth, Laboratory Manager Application Technology, Celanese Emulsions GmbH,
Germany
High strength hybrid adhesives: Today’s fillers for tomorrow’s technology ·· 681
Dennis Werner, Omya AG, Switzerland
Innovative Waterborne Polyurethane Dispersions for Modern Adhesive Applications ··················································································································· 690
Dr. Matthias Wintermantel, Bayer MaterialScience AG, Germany
Improved Bonding and Formulation Flexibility in Hot Melt Adhesives Based on Ethylene-Octene Elastomers ················································································ 704
Allan Mc Lennaghan, Lead Engineer Dow Elastomers, The Dow Chemical Company, USA
- ix -
》 Session 4-Track 2: Challenges and Opportunities to ManagementModerator: Cees Pille, Dutch Adhesives & Sealants Association (VLK)
What is in the crystal ball and what are the implications on our industries?·········································································································································· 713
Daniel S. Murad, President and CEO, The ChemQuest Group Inc., USA
Adhesive Bonding – but properly! An online-guideline for the correct use of adhesives ························································································································ 721
Andreas Groß, Head of Department ”Workforce Training and Technology Transfer“, Fraunhofer
IFAM, Germany
VOC – Challenges and Opportunities : LEED, EMICODE, VOC regulations · 730
Reinhard Oppl, Director, Eurofins Product Testing A/S, Denmark
Benchmarks & Critical Success Factors for Product and Technology Introduction in Adhesives ·························································································· 739
Bernard Hasson, Chief Operating Officer SpecialChem, France
Building reactive adhesive platforms globally designed around clear value propositions, from flexible packaging to panel assembly applications ········ 750
Marga Acevedo, Technical Manager – Global Reactives R&D, H.B. Fuller Company, USA
Intelligent use of scarce resources – the key to a sustainable future ········· 762
Anna Holmberg, Sustainability Policy Director – Europe, Arizona Chemical, USA
》 Session 4-Track 3: Progressive Problem SolvingModerator: Hermann Onusseit, Industrieverband Klebstoffe e.V. (IVK) German Adhesives
Association
The Effect of Bonding & De-bonding Conditions on Peel Adhesion ·········· 775
Allen Tsaur, Material Engineer at Adhesive Source, Consultant, Adhesive Source, Taiwan
Mixer Development with Computational Fluid Dynamics (CFD) ····················· 783
Dr. Sasan Habibi-Naini, Head of Strategic Innovation, Sulzer Mixpac Ltd., Switzerland
Established and new Solutions for the Pelletizing of Hot Melt Adhesives ·· 795
Michael Eloo, Managing Director, Gala Kunststoff- und Kautschukmaschinen GmbH, Germany
- x -
Multifunctional Adhesive Coating and Corrosion Protection For Magnet Applications ··················································································································· 808
Dr. Lothar Zapf, Permanent Magnets R&D, Chemical Technology, Vacuumschmelze GmbH &
Co. KG, Germany
Numerical and Experimental Investigation of Single Lap Shear Joint Design Elements on Joint Fatigue Strength ······································································· 817
Robert Jennings, Research Specialist 3M, USA
》 Session 4-Track 4: Adhesives as Enabler for Lightweight DesignModerator: Jürgen Wichelhaus, Henkel
Sustainability as a priority in the European transport policy ·························· 829
Saïd El Khadraoui, Member of the European Parliament (Member of the Committee on
Transport and Tourism, Belgium
Present and Future of the Chinese Auto Industry-Opportunities and Risks · 835
Dr. Bernd Leissner, President, BMLEI LLC. International Automotive Consulting, USA
Structural Bonding as Key Technology for Automotive Lightweight Parts in Multi-Material-Design ·································································································· 848
Benjamin Kraemer, Technical Marketing Manager Structural Bonding, Sika Automotive GmbH,
Germany
Properties of adhesives and adhesive materials used in aviation industry ··· 860
Irina A. Sharova, Federal State Unitary Enterprise All-Russian Scientific Research Institute of
Aviation Materials (VIAM), Russian Federation
Adhesive and Sealant Development in Aerospace: An Overview ··················· 864
Leslie J. Clark, Engineer - Surface Technology - Materials and Processes - ESWBU, Airbus
Operations Ltd, UK