7/23/2019 IJOS-12.a_LD (Lab Diagrams).pdf
2/8
This document is produced by Juniper Networks, Inc.
This document or any par t thereof may not be reproduced or
transmitted in any form under penalty of law, without the prior
written permission
of Juniper Networks Education Services.
Juniper Networks, Junos, Steel-Belted Radius, NetScreen, and
ScreenOS are registered trademarks of Juniper Networks, Inc. in the
United
States and other countries. The Juniper Networks Logo, the Junos
logo, and JunosE are trademarks of Juniper Networks, Inc. All
other
trademarks, service marks, registered trademarks, or registered
service marks are the property of their respective owners.
Juniper Networks reserves the right to change, modify, transfer,
or otherwise revise this publication without notice.
YEAR 2000 NOTICE
Juniper Networks hardware and software products do not suffer
from Year 2000 problems and hence are Year 2000 compliant. The
Junos
operating system has no known time-related limitations through
the year 2038. However, the NTP application is known to have some
difficul ty
in the year 2036.
SOFTWARE LICENSE
The terms and conditions for using Juniper Networks software are
described in the software license provided with the software, or to
the
extent applicable, in an agreement executed between you and
Juniper Networks, or Juniper Networks agent. By using Juniper
Networks
software, you indicate that you understand and agree to be bound
by its license terms and conditions. Generally speaking, the
software
license restricts the manner in which you are permitted to use
the Juniper Networks software, may contain prohibitions against
certain uses,
and may state conditions under which the license is
automatically terminated. You should consult the software license
for further details.
Introduction to the Junos Operating System Lab Diagrams,
Revision 12.a
Copyright 2012, Juniper Networks, Inc.
All rights reserved. Printed in USA.
Revision History:
Revision 9.aJuly 2009; Revision 9.bOctober 2009; Revision
10.aMay 2010; Revision 10.bMay 2010; Revision 11.aJune 2011
Revision 12.aJune 2012
The information in this document is current as of the date
listed above.
The information in this document has been carefully verified and
is believed to be accurate for software Release 12.1R1.9. Juniper
Networks
assumes no responsibilities for any inaccuracies that may appear
in this document. In no event will Juniper Networks be liable for
direct,
indirect, special, exemplary, incidental or consequential
damages resulting from any defect or omission in this document,
even if advised of
the possibility of such damages.
![CE 160 Lab 2 Notes: Shear and Moment Diagrams for Beams Lab 2 notes .pdf · 1 Vukazich CE 160 Lab 2 Notes [L2] CE 160 Lab 2 Notes: Shear and Moment Diagrams for Beams Shear and moment](https://img.pdfslide.us/doc/110x75/5af1c87f7f8b9ac2468fc149/ce-160-lab-2-notes-shear-and-moment-diagrams-for-lab-2-notes-pdf1-vukazich-ce.jpg)
