IDCA_product_overview

8/7/2019 IDCA_product_overview

http://slidepdf.com/reader/full/idcaproductoverview 1/20

DN04185196 © Nokia Corporation 1 (20)Issue 1-0 en Nokia Proprietary and Confidential

IDCA and IDCB Product Overview






Contents

Contents 3

1 Introduction to Nokia UltraSite EDGE Base Station Indoor Cabinet(IDCA/IDCB) 5

1.1 Upgrade features 51.2 Overview of UltraSite EDGE BTS indoor cabinet (IDCA/IDCB) 61.3 Software compatibility of UltraSite EDGE BTS indoor cabinet

(IDCA/IDCB) 71.4 Torque settings of UltraSite EDGE BTS indoor cabinet (IDCA/IDCB) 71.5 Delivery content of UltraSite EDGE BTS indoor cabinet (IDCA/IDCB)

transportation package 91.6 External hardware interfaces of UltraSite EDGE BTS 800, 900, 1800 and

1900 10

1.7 Overview of cabling GSM/EDGE units of UltraSite EDGE BTS indoorcabinet (IDCA/IDCB) 10

2 Maximum configurations for the indoor cabinets (IDCA/IDCB) 13

3 Construction and units 153.1 Mechanics and internal cables 15

4 Technical specifications for the indoor cabinets (IDCA/IDCB) 174.1 Standards 20




4 (20) © Nokia Corporation DN04185196Nokia Proprietary and Confidential Issue 1-0 en



Introduction to Nokia UltraSite EDGE Base Station Indoor Cabinet (IDCA/IDCB)


1 Introduction to Nokia UltraSite EDGEBase Station Indoor Cabinet(IDCA/IDCB)

Nokia UltraSite EDGE BTS supports both omni-directional and sectorisedconfigurations for traditional voice and future data applications. The BTS can beused in GSM/EDGE 800, 900, 1800 or 1900 MHz systems. With the addition of EDGE/EGPRS, the BTS offers a maximum data rate of more than 470 kbit/s withmultiple timeslots, as compared to more than 100 kbit/s with multiple timeslotsfor GSM/GPRS.

Nokia UltraSite EDGE BTS is available in different cabinets for outdoor andindoor applications, including the:

• Nokia UltraSite EDGE BTS Indoor (IDCA) - 12 TRX Capacity

• Nokia UltraSite EDGE Triple Mode BTS Indoor (IDCB) - 6 TRX +WCDMA Upgrade

1.1 Upgrade features

The following is a list of changes visible on the new indoor cabinet(IDCA/IDCB):

• The sidewalls are flat (bend was removed).

• Door locking plate now comes standard with the IDCA/IDCB.

• When viewed from above with the roof installed, input power terminalsand other roof components are visible as they are not totally covered. Also,the roof is now made of two side panels, and a plastic front mask instead of a solid sheet metal piece.

• Bottom part is a deep drawn, single steel piece versus a multi-piece,aluminium bottom.

• The door and feet are now pre-installed.





• All environmental gaskets (PSU, Common BP cover, etc.) were removedfrom IDCA/IDCB.

• One ATCA kit (six cables) is pre-installed on the back row of the

IDCA/IDCB antenna box.• The bulkhead connectors on the ATCA cables are now mounted using a

large nut with a “D” shaped connector instead of four M3 screws.

• The EMC nets for transmission cable(s) were shortened and reduced fromtwo to one.

• Battery vent tube was removed from the top of the cabinet since IBBU isnot supported

• -48 VDC filter has bolt style terminals instead of screw type.

• Door Grounding Cable is now round instead of flat

• The IBBU and Triple Mode Power cables (J1) were removed from thestandard busbar. Adapter cables are available through Hardware Servicesto provide the power connection for Triple Mode system. The IDCBcabinet comes standard with the adapter cables.

1.2 Overview of UltraSite EDGE BTS indoor cabinet(IDCA/IDCB)

Figure 1 illustrates the Indoor cabinets.

1 Cabinet

2 Roof Mask

3 Roof Mask side (Qty 2)





Figure 1. Nokia UltraSite EDGE BTS Indoor cabinet (IDCA/IDCB)

1.3 Software compatibility of UltraSite EDGE BTSindoor cabinet (IDCA/IDCB)

There is no requirement to upgrade software when upgrading to the new indoorcabinets, i.e., IDCA/IDCB indoor cabinets are compatible with the existingsoftware.

1.4 Torque settings of UltraSite EDGE BTS indoorcabinet (IDCA/IDCB)

Nokia recommends the following torque values for the various fasteners whichare used in UltraSite EDGE BTS indoor cabinet (IDCA/IDCB). These are basictorque values and any exceptions are provided in the installation procedures.

2

DN03418962

1

3





Table 1. Cabinet intallation torque recommendations

Bolt/screw type DIN Size TorquePlastic connector ngerscrews

0.2 - 0.3 Nm (0.15 - 0.22 ft lb)

Slotted head, phillipshead, or Torx head screw

M3 0.7 - 1.0 Nm (0.52 - 0.74 ft lb)


M4 1.2 - 1.6 Nm (0.88 - 1.18 ft lb)


M5 2.0 - 2.6 Nm (1.47 - 1.92 ft lb)

Hexagon socket headscrew

933-A2 M6 4.2 - 5.5 Nm (3.1 - 4.05 ft lb

Nut 934-A2 M6 4.2 - 5.5 Nm (3.1 - 4.05 ft lb)

Hexagon socket headscrew

912-A2 M8 8.0 - 10.0 Nm (5.9 - 7.37 ft lb)

3/8 hexagon head bolt 933-A2 M10 24 Nm (17.69 ft lb)

Lifting eye bolt (notincluded)

580 M12 39 Nm (28.74 ft lb)

Torx socket head screwcylinder head

934-A2 M3 0.7 Nm (0.52 ft lb)


934-A2 M4 1.2 Nm (0.89 ft lb)


934-A2 M5 2.5Nm (1.84 ft lb)

Table 2. Unit intallation torque recommendations

Bolt/screw type DIN Size Torque

Antenna ange mount connector7/16 in. (4 each)

934-A2 M3 1.0 Nm (0.7 ft lb)

Thumb screw 934-A2 M4 1.0 Nm (0.7 ft lb)

Ground lug nut 934-A2 M5 2.0 Nm (0.7 ft lb)

Ground lug nut M8 4.0 Nm (1.5 ft lb)

Battery terminal screws Notavailable

6.78 Nm (5.0 ft lb)





1.5 Delivery content of UltraSite EDGE BTS indoor

cabinet (IDCA/IDCB) transportation packageAll IDCA/IDCB components are pre-installed except the roof mask and the roof mask sides .

Antenna connector 7/16 in 25 Nm (18.5 ft lb)

SMA connector Notavailable

1.0 Nm (0.7 ft lb)

PWSC terminals M8 10 Nm (7.0 ft lb)

-48 VDC Filter Output Terminal M10 14 Nm (9.8 ft lb)

-48 VDC Filter Input Terminal M10 14 Nm (9.8 ft lb)

Table 3. WCDMA unit intallation torque recommendations

Bolt/screw type Size Torque

Antenna ange mount connector (4 each) M3 0.1 Nm (0.074 ft lb)

Unit mounting crew M3 0.7 Nm (0.52 ft lb)

Unit mounting crew M4 1.2 Nm (0.89 ft lb)

Right angle Antenna connector N/A 25 Nm (18.5 ft lb)

Table 2. Unit intallation torque recommendations (Continued)

Bolt/screw type DIN Size Torque





Note

Anchor bolts, washers, and nuts for mounting the cabinet are not included in theIDCA/IDCB transportation package.

1.6 External hardware interfaces of UltraSite EDGEBTS 800, 900, 1800 and 1900

The external hardware interfaces have not changed for the Nokia UltraSite EDGEBTS indoor cabinet (IDCA/IDCB), and for details refer to the Nokia UltraSiteEDGE BTS Product Description, DN03398222, Issue 1.0 en :

1.7 Overview of cabling GSM/EDGE units of UltraSiteEDGE BTS indoor cabinet (IDCA/IDCB)

The required cable kit accompanies the units in the delivery package.

Table 4. Delivery content of UltraSite EDGE BTS indoor cabinet(IDCA/IDCB) transportation package

IDCA/IDCB Components Quantity

Cabinet 1

Roof Mask 1

Roof Mask side 2

Internal antenna cables 6





Note

The 069313x cables are pre-installed on the IDCA/IDCB cabinets.

Table 5. Unit cable kits

Category Property Cablequantity From unit To unit

066641x 993857xx(TSxx)

2 each TSxx M2xA or M6xADVxx or RTxxor WCxA

066643x 994081x(M2xA)

2 each DVxx or RTxx M2xA

066644x 993856x(M6xA)

2 each DVxx or RTxx M6xA

066647x 993747x

(WCxA)

1 each WCxA WCxA or

DVxx069314x 993935x (Bias

Tee)2 each

1 - Adapterplate

Bias TeeInterfaceModule

BPxx

066646x 993997x(RTxx)

1 each RTxx RFUbackplane

993997x(DVxx)

1 each DVxx RFUbackplane

069313x 993744x(Antenna: 2.0

m)

2 each DVxx or RTxx Antenna box

993936x(Antenna: 1.4m)


993937x(Antenna: 1.7m)








Maximum configurations for the indoor cabinets (IDCA/IDCB)


Note

2 Maximum configurations for the indoorcabinets (IDCA/IDCB)

The following tables show the maximum configurations for Nokia UltraSiteEDGE BTS indoor cabinets (IDCA/IDCB).

Maximum configurations are the same as for the old cabinets.

Table 6. Maximum number of TRXs per Nokia UltraSite EDGE BTS indoorcabinets (IDCA/IDCB)

CongurationsTRXs (Indoor

cabinet)

TRXs (Indoorcabinet with

integratedWCDMA)

Combined or combiningbypass

12 6

Combined or combiningbypass with 4-way RXdiversity

6 3

SRC with 2-way RXdiversity

6 3

SRC with 4-way RXdiversity

6 3





Table 7. Maximum number of sectors with various types of combining

Types ofcombining

MaximumGSM/EDGEsectors (Indoorcabinet)

MaximumGSM/EDGEsectors (Indoorcabinet withintegratedWCDMA)

Combiningbypass

6 3

WBC 2:1 4 2

WBC 4:1 2 1

RTC 2 1

Table 8. Maximum congurations for Nokia UltraSite EDGE BTS indoorcabinet (IDCA/IDCB) with integrated WCDMA equipment

CongurationOutput power percarrier

Maximum HW-Channel capacity with5 WSP

1+1+1 Rel 1/Rel 2 8 W Rel 1:160/Rel 2: 320

2+2+2 Rel 2 4 W Rel 1:160/Rel 2: 320



Construction and units


3 Construction and unitsThe construction of Nokia UltraSite EDGE BTS is optimised for macrocellularsolutions. The cabinet and units are easy to install and move, and the uniformfootprints allow Nokia UltraSite EDGE BTS to be installed anywhere acorresponding Nokia Talk-family cabinet can be installed.

3.1 Mechanics and internal cables

Nokia UltraSite EDGE BTS indoor cabinets (IDCA/IDCB) are designedspecifically for indoor applications. The IDCA can accommodate up to 12 TRXsand comes preconfigured with six internal antenna cables.

The IDCB can accommodateup to six TRXs and the WCDMA upgrade kit. It alsocomes delivered with six internal antenna cables.

Both cabinet types are preconfigured with a -48 VDC line filter. The only cabinet

mechanical items which must be installed after unpacking are the roof mask andthe side parts.







Technical specifications for the indoor cabinets (IDCA/IDCB)


4 Technical specifications for the indoorcabinets (IDCA/IDCB)

This section provides technical and environmental specifications and externalhardware interfaces for Nokia UltraSite EDGE BTS indoor cabinets(IDCA/IDCB).

Table 9 shows technical specifications for Nokia UltraSite EDGE BTS indoorcabinets (IDCA/IDCB).

Table 9. Technical specications

Property Indoor

Height 1800 mm

70.9 in.

Width 600 mm

23.6 in.

Depth 618 mm*

24.4 in.

Maximum cabinet weight (with units) 281 kg

629 lb

Maximum cabinet weight (without units) 95 kg

210 lb

Low air temperature limit -5 ° C

(23 ° F)

High air temperature limit 50 ° C

122 ° F

Ingress protection class IP 20

Acoustic noise:

+50 ° C/122 ° F 69 dB (A)

+40 ° C/104 ° F 65 dB (A)





Tables 10 and 11 list the operating voltage, typical and maximum powerconsumptions.

The consumption values for different configurations in Table 11 are the same asfor the old cabinets.

+30 ° C/86 ° F 62 dB (A)

+20 ° C/68 ° F 59 dB (A)

0 ° C/32 ° F 59 dB (A)

-5 ° C/23 ° F 58 dB (A)

-10 ° C/14 ° F N/A

*Includes 54 mm behind the cabinet for the spacer part that isrequired for cabinet cooling.

Table 10. Operating voltage range

Property AC DC

Nominaloperatingvoltage

230 VAC (50/60 Hz) -48 VDC +24 VDC

Permittedoperating

voltageuctuation

184 to 276 VAC -36 to -60 VDC +20 to +32 VDC

Frequencyrequirement

45 to 66 Hz - -

Table 9. Technical specications (Continued)

Property Indoor



Technical specifications for the indoor cabinets (IDCA/IDCB)


Note

• Tolerance of maximum power consumption value: +/-5%

• Typical values circumstance: BCCH TRXs on full power, 40% of timeslots in use with TSxB's operating in GMSK-mode

• Maximum values circumstance: All TRXs on full power, all time slots inuse with TSxB's operating in GMSK-mode

• MHA and external units are excluded

• Filtering is DVxx, except with 6 / 6+6 / 6+6+6 configurations it is RTC

The following specifications have not changed for the Nokia UltraSite EDGEBTS indoor cabinet (IDCA/IDCB), and for details refer to the Nokia UltraSite

EDGE Base Station (BTS) Product Overview, DN99109462, Issue 6.0 en :• Environmental specifications

• RF properties of Nokia UltraSite EDGE BTS 800, 900, 1800, 1900

• RF properties of Nokia UltraSite BTS with integrated WCDMA

• External hardware interfaces

Table 11. Power consumption with different congurations

-48 VDC -48 VDC 24 VDC or 230 VACConguration Typical Max Typical Max

Indoor 1 0.4 kW 0.4 kW 0.4 kW 0.4 kW

3 0.6 kW 0.9 kW 0.7 kW 1.0 kW

1+1 0.7 kW 0.8 kW 0.7 kW 0.8 kW

2+2 1.0 kW 1.2 kW 1.1 kW 1.3 kW

6+6 1.9 kW 3.2 kW 2.0 kW 3.6 kW

1+1+1 0.9 kW 1.0 kW 1.0 kW 1.1 kW

2+2+2 1.1 kW 1.7 kW 1.2 kW 1.9 kW

3+3+3 1.5 kW 2.5 kW 1.7 kW 2.8 kW

4+4+4 1.8 kW 3.2 kW 2.0 kW 3.6 kW

6+6+6 2.3 kW 4.8 kW 3.1 kW 5.4 kW




20 (20) © N ki C ti DN04185196

4.1 Standards

The following standards have not changed for the Nokia UltraSite EDGE BTS

indoor cabinet (IDCA/IDCB), and for details refer to the Nokia UltraSite EDGE Base Station (BTS) Product Overview, DN99109462, Issue 6.0 en :

• Common standards

• Electrical standards on input voltages, safety and EMC

• Mechanical standards

• Environmental standards

Documents

IDCA_product_overview