Upload
ibjsccom
View
216
Download
0
Embed Size (px)
Citation preview
8/8/2019 IBJSC.com | I-WEB.com.vn Manual 1011453510
1/17
Integrated Amplier
PM8004
ENGLISHFRANAISESPAOL
8/8/2019 IBJSC.com | I-WEB.com.vn Manual 1011453510
2/17
ENGLISHFRANAISESPAOL
I
nSAFETYPRECAUTIONS
CAUTIONRISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TOREDUCETHERISKOFELECTRICSHOCK,DONOTREMOVECOVER(ORBACK).NOUSER-SERVICEABLEPARTSINSIDE.REFERSERVICINGTOQUALIFIEDSERVICEPERSONNEL.
The lightning ash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence ouninsulated dangerous voltage within the products enclosurethat may be o sufcient magnitude to constitute a risk oelectric shock to persons.
The exclamation point within an equilateral triangle is intendedto alert the user to the presence o important operatingand maintenance (servicing) instructions in the literatureaccompanying the appliance.
WARNING:TOREDUCETHERISKOFFIREORELECTRICSHOCK,DONOTEXPOSETHISAPPLIANCETORAINORMOISTURE.
CAUTION:HOTSURFACE.DONOTTOUCH.The top surace over the internal heat sink may become hot
when operating this product continuously.
Do not touch hot areas, especially around the Hot surace
mark and the top panel.
PRECAUTION:SURFACECHAUDE.NEPASTOUCHER.La surace suprieure du dissipateur de chaleur peut devenir
chaude si vous utilisez ce produit en continu.
Ne touchez pas les zones chaudes, tout particulirement vers
linscription Hot surace mark et le panneau suprieur.
PRECAUCIN:SUPERFICIECALIENTE.NOTOCAR.La superfcie superior sobre el disipador de calor interno
podra llegar a calentarse al operar este producto de orma
continua.
No toque las reas calientes, especialmente las situadas
alrededor de la Hot surace mark y del panel superior.
Hot
surace
mark
CAUTION:To completely disconnect this product rom the mains, disconnect the plug
rom the wall socket outlet.
The mains plug is used to completely interrupt the power supply to the unit
and must be within easy access by the user.
PRECAUTION:Pour dconnecter compltement ce produit du courant secteur, dbranchez
la prise de la prise murale.
La prise secteur est utilise pour couper compltement lalimentation de
lappareil et lutilisateur doit pouvoir y accder acilement.
PRECAUCIN:Para desconectar completamente este producto de la al imentacin elctrica,
desconecte el enchue del enchue de la pared.
El enchue de la alimentacin elctrica se utiliza para interrumpir por completo
el suministro de alimentacin elctrica a la unidad y debe de encontrarse en
un lugar al que el usuario tenga cil acceso.
FCCINFORMATION(ForUScustomers)
1.PRODUCTThis product complies with Part 15 o the FCC Rules. Operation is subject
to the ollowing two conditions: (1) this product may not cause harmul
intererence, and (2) this product must accept any intererence received,
including intererence that may cause undesired operation.
2.IMPORTANTNOTICE:DONOTMODIFYTHISPRODUCTThis product, when installed as indicated in the instructions contained
in this manual, meets FCC requirements. Modifcation not expressly
approved by Marantz may void your authority, granted by the FCC, to use
the product.
3.NOTEThis product has been tested and ound to comply with the limits or
a Class B digital device, pursuant to Part 15 o the FCC Rules. These
limits are designed to provide reasonable protection against harmul
intererence in a residential installation.
This product generates, uses and can radiate radio requency energy and,
i not installed and used in accordance with the instructions, may cause
harmul intererence to radio communications. However, there is no
guarantee that intererence will not occur in a particular installation. I this
product does cause harmul intererence to radio or television reception,
which can be determined by turning the product OFF and ON, the user
is encouraged to try to correct the intererence by one or more o the
ollowing measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the product into an outlet on a circuit dierent rom that to
which the receiver is connected.
Consult the local retailer authorized to distribute this type o product or
an experienced radio/TV technician or help.
ForCanadiancustomers:This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numrique de la classe B est conorme la norme NMB-003 du
Canada.
IMPOTANTSAFETYINSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the manuacturers instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifers) that produce heat.
9. Do not deeat the saety purpose o the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third gr ounding prong. The wide blade or the
third prong are provided or your saety. I the provided plug does not ft into
your outlet, consult an electrician or replacement o the obsolete outlet.
10. Protect the power cord rom being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit rom the
apparatus.
11. Only use attachments/accessories specifed by the manuacturer.
12. Use only with the cart, stand, tripod, bracket, or table
specifed by the manuacturer, or sold wi th the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury rom tip-over.
13. Unplug this apparatus during lightning storms or when
unused or long periods o time.
14. Reer all servicing t o qualifed service personnel.Servicing is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or
objects have allen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
15. Batteries shall not be exposed to excessive heat such as sunshine, fre or
the like.
8/8/2019 IBJSC.com | I-WEB.com.vn Manual 1011453510
3/17
ENGLISH FRANAIS ESPAOL
II
nCAUTIONSONINSTALLATION PRCAUTIONSDINSTALLATION EMPLAZAMIENTODELAINSTALACIN
WallParoiPared
z
z
z
z
zForproperheatdispersal,donotinstallthisunitinaconfnedspace,suchasabookcaseorsimilarenclosure. More than 0.3 m (12 in.) is recommended.
Do not place any other equipment on this unit.
zPourpermettre la dissipationde chaleur requise, ninstallezpascetteunitdansunespaceconfntelquunebibliothqueouunendroitsimilaire. Une distance de plus de 0,3 m (12 po) est recommande.
Ne placez aucun matriel sur cet appareil.zParala dispersindel caloradecuadamente,no instale esteequipoenunlugarconfnadotalcomounalibreraounidadsimilar. Se recomienda dejar ms de 0,3 m (12 pulg.) alrededor.
No coloque ningn otro equipo sobre la unidad.
nNOTESONUSE/OBSERVATIONSRELATIVESALUTILISATION/NOTASSOBREELUSO
WARNINGS AVERTISSEMENTS ADVERTENCIAS Avoid high temperatures.
Allow or sufcient heat dispersion when
installed in a rack.
Handle the power cord careully.
Hold the plug when unplugging the cord.
Keep the unit ree rom moisture, water, and
dust.
Unplug the power cord when not using the unit
or long periods o time.
Do not obstruct the ventilation holes.
Do not let oreign objects into the unit.
Do not let insecticides, benzene, and thinner
come in contact with the unit.
Never disassemble or modiy the unit in any way.
Ventilation should not be impeded by covering
the ventilation openings with items, such as
newspapers, tablecloths or curtains.
Naked ame sources such as lighted candles
should not be placed on the unit.
Observe and ollow local regulations regarding
battery disposal.
Do not expose the unit to dripping or splashing
uids.
Do not place objects flled with liquids, such as
vases, on the unit.
Do not handle the mains cord with wet hands. When the switch is i n the OFF position, the
equipment is not completely switched o rom
MAINS.
The equipment shall be installed near the
power supply so that the power supply is easily
accessible.
Eviter des tempratures leves.
Tenir compte dune dispersion de chaleur
sufsante lors de linstallation sur une tagre.
Manipuler le cordon dalimentation avec
prcaution.
Tenir la prise lors du dbranchement du cordon.
Protger lappareil contre lhumidit, leau et la
poussire.
Dbrancher le cordon dalimentati on lorsque
lappareil nest pas utilis pendant de longues
priodes.
Ne pas obstruer les trous daration.
Ne pas laisser des objets trangers dans
lappareil.
Ne pas mettre en contact des insecticides, du
benzne et un diluant avec lappareil.
Ne jamais dmonter ou modifer lappareil dune
manire ou dune autre.
Ne pas recouvrir les orifces de ventilation avec
des objets tels que des journaux, nappes ou
rideaux. Cela entraverait la ventilation.
Ne jamais placer de amme nue sur lappareil,
notamment des bougies allumes.
Veillez respecter les lois en vigueur lorsque
vous jetez les piles usages.
Lappareil ne doit pas tre expos leau ou lhumidit.
Ne pas poser dobjet contenant du liquide, par
exemple un vase, sur lappareil.
Ne pas manipuler le cordon dalimentation avec
les mains mouilles.
Lorsque linterrupteur est sur la position OFF,
lappareil nest pas compltement dconnect du
SECTEUR (MAINS).
Lappareil sera install prs de la source
dalimentation, de sorte que cette dernire soit
acilement accessible.
Evite altas temperaturas.
Permite la sufciente dispersin del calor cuando
est instalado en la consola.
Maneje el cordn de energa con cuidado.
Sostenga el enchue cuando desconecte el
cordn de energa.
Mantenga el equipo libre de humedad, agua y
polvo.
Desconecte el cordn de energa cuando no
utilice el equipo por mucho tiempo.
No obstruya los orifcios de ventilacin.
No deje objetos extraos dentro del equipo.
No permita el contacto de insecticidas, gasolina
y diluyentes con el equipo.
Nunca desarme o modifque el equipo de
ninguna manera.
La ventilacin no debe quedar obstruida por
haberse cubierto las aperturas con objetos como
peridicos, manteles o cortinas.
No debern colocarse sobre el aparato uentes
inamables sin proteccin, como velas
encendidas.
A la hora de deshacerse de las pilas, respete la
normativa para el cuidado del medio ambiente.
No exponer el aparato al goteo o salpicaduras
cuando se utilice. No colocar sobre el aparato objetos llenos de
lquido, como jarros.
No maneje el cable de alimentacin con las
manos mojadas.
Cuando el interruptor est en la posicin OFF, el
equipo no est completamente desconectado de
la alimentacin MAINS.
El equipo se instalar cerca de la uente de
alimentacin de manera que resulte cil acceder
a ella.
II
8/8/2019 IBJSC.com | I-WEB.com.vn Manual 1011453510
4/17
1
Getting
started
Basicconnections
Basicoperation
Troubleshooting
Specifcations
Index
Advancedconnections
Advancedoperation
Expla
nationterms
ENGLISH
Thank you or purchasing this MARANTZ product. To ensure properoperation, please read this owners manual careully beore using theproduct.Ater reading the manual, be sure to keep it or uture reerence.
Getting started
Getting
started
Contents
Gettingstarted 1
Accessories 1
Aboutthismanual 1Maineatures2Cautionsonhandling3Abouttheremotecontrol3
Inserting the batteries3
Operating range o the remote control 3
Partnamesandunctions4Front panel 4
Rear panel 4
Remote control 5
Basicconnections6
Preparations 6
Connecting cables 6Connectingtheaudioequipment 6Connectingthespeakers 6
Connecting the speakers cables 6
Speaker connections 7
Connectingplayers 7Connectingrecorders 7Connectingthepowercord8
Basicoperation8
Beoreuse 8
Turning the power on 8Turning the power standby 8
Turning the power o 8
Startingplayback 9Direct playback using a source audio component 9
Muting sound9
Usingheadphoneset 9StartingRecording9
Advancedconnections9
ConnectingP.DIRECTconnectors9Connectingpreoutconnectors 10
Connectingtheremotecontrolconnectors10
Advancedoperations10
SettingAutostandbymode10
Troubleshooting11
Specifcations12
Explanationterms12
Index 12
AccessoriesCheck that the ollowing parts are supplied with the product.
q Owners manual ...................................................................... 1w Power cord (Cord length: Approx. 1.8 m) .................................1e Remote control (RC003PM) .................................................... 1r R03/AAA batteries ................................................................... 2
w e
About this manual
n Operation buttonsThe operations described in this manual are based mainly on
remote control operation.
n Symbols
v This symbol indicates a reerence page on whichrelated inormation is described.
This symbol indicates a supplementary inormation
and tips or operations.
NOTE This symbol indicates points to remember operationsor unction limitations.
n IllustrationsNote that the illustrations in these instructions are or explanation
purposes and may dier rom the actual unit.
8/8/2019 IBJSC.com | I-WEB.com.vn Manual 1011453510
5/17
2
ENGLISH
All-discretecurrent-eedbackampliferMarantz proprietary current-eedback circuit, using discretecomponents, is adopted in the pre amplifer and power amplifer.
It is a high-speed amplifer using the latest technology developed
or the higher-grade amplifers.
HDAM-SA3TechnologyThe V/I converter circuit, which is the key block o the current-
eedback pre-amplifer and power amplifer, is equivalent to the
HDAM-SA3 ampmodule developed or such higher-grade models
as the PM-11S2.
CDdirectbueramplifer
An input buer amplifer exclusive or CD is mounted near theCD input jacks. This is a high-speed buer amplifer made with
discrete components, which avoids intererence between right
and let channels and can send the signals to the pre-amplifer with
very high fdelity.
ImprovedmomentarycurrentsupplyabilityIt is generally known that the sound quality is not necessarily the
same even i amplifers have the same specifations.
Marantz considers the cause to be the power to drive speakers.
The power amplifer o this unit has the ability to momentarily
supply current o 25 A or more to drive speakers strongly.
Short-power-linelayoutFor strong momentary current supply, a short power-line layout
unifes the power circuit and output stage o the power amplifer
section.
This layout allows connecting the large-current lines via the shortest
route while to arranging the let and right channels symmetrically.
Main eatures
All-Discretecurrent-eedbackphonoequalizerAs a phono equalizer amplifer or MM cartridges, a constant
current-eedback PHONO equalizer o quality equal to that o the
higher-grade model PM-11S2 is used.
Double-shieldedtriodaltransormerThe unit is equipped with a toroidal power transormer to minimize
vibration and leakage ux specifc to the transormer.
Especially to reduce leakage ux, which aects sound quality, the
periphery is double-shielded, using a core ring and a short ring.
BlockcondenserolargecapacityA large-capacity condenser o 18,000F is used in the power circuit
o the power amplifer. In the preamplifer, a 4700F condenser is
used.
High-perormancevolume
Capacitororhighqualitysound
Double-layeredchassis
High-gradespeakerterminals
Tri-tonecontrolThis unit has a 3-tone control unction or adjusting the midrange
sound in addition to the bass and treble sounds so that you can
make a more variable sound adjustment according to source and
system.
8/8/2019 IBJSC.com | I-WEB.com.vn Manual 1011453510
6/17
3
Getting
started
Basicconnections
Basicoperation
Troubleshooting
Specifcations
Index
Advancedconnections
Advancedo
peration
Expla
nationterms
ENGLISH
Getting
started
Cautions on handling Beoreturningthepowerswitchon
Check once again that all connections are correct and that there are
no problems with the connection cables.
Power is supplied to some o the circuitry even when the unit is set
to the standby mode. When leaving home or long periods o time,
be sure to unplug the power cord rom the power outlet.
AboutcondensationI there is a major dierence in temperature between the inside
o the unit and the surroundings, condensation may orm on parts
inside the unit, causing the unit to ail to operate properly.I this happens, let the unit sit or an hour or two with the power o
and wait until there is little dierence in temperature beore using
the unit.
CautionsonusingmobilephonesUsing a mobile phone near this unit may result in noise. I that
occurs, move the mobile phone away rom the unit when it is in
use.
MovingtheunitTurn o the power and unplug the power cord rom the power
outlet.
Next, disconnect the cables connected to other system units
beore moving the unit.
About the remote control
Inserting the batteries
q Remove the rear cover o the remotecontrol.
w Set two R03/AAA batteries in the batterycompartment in the indicated direction.
e Put the rear cover back on.
NOTE
Replace the batteries with new ones i the unit does not operate
even when the remote control is operated close to the unit.
The supplied batteries are only or veriying operation.
Insert the batteries in the proper direction, ollowing the q and
w marks in the battery compartment.
To prevent damage or leakage o battery uid:
Do not use a new battery with an old one.
Do not use two dierent types o batteries.
Do not attempt to charge dry batteries.
Do not short-circuit, disassemble, heat or dispose o batteries in
a fre.
Do not keep the battery in a place exposed to direct sunlight or in
places with extremely high temperatures, such as near a heater.
I the battery uid leaks, careully wipe the uid o the inside o the
battery compartment and insert new batteries.
Remove the batteries rom the remote control i it will not be used
or a long time.
Used batteries in accordance with local regulations on battery
disposal.
Approx. 16.4t / 5 m
NOTE
The unit may unction improperly or the remote control may not
operate i the remote control sensor is exposed to direct sunlight, or
strong artifcial light rom a uorescent or inrared light.
Operating range o the remote controloperate the remote control while pointing it at the remote sensor.
30
30
8/8/2019 IBJSC.com | I-WEB.com.vn Manual 1011453510
7/17
4
ENGLISH
qPowerswitch(ON/OFF)(8)
wSTANDBYindicator(8)Indicates the status o the units as ollows:
Power ON : O When the protection circuit is activated :
Red (blinking) ..............................................(6)
Standby : Red
Power OFF : O
eINPUTSELECTORknob (9)
rInputindicators (8)
tMUTEindicator(MUTE)(9)
yVOLUMEcontrolknob(8, 9)
uRemotecontrolsensor (3, 10)
iBALANCEcontrolknob(8, 9)
oSOURCEDIRECTswitch/indicator (9)
Q0TREBLEcontrolknob (8, 9)
Q1POWERAMPDIRECTswitch/indicator(9)
Q2MIDcontrolknob(8, 9)
Q3SPEAKERSA/Bswitch/indicators(9)
Q4BASScontrolknob(8, 9)
Q5Headphonejack(PHONES)(9)
NOTE
You can adjust thei BALANCE,Q0 TREBLE,Q2MID andQ4 BASS control knobs only when oSOURCE DIRECT switch is turned o.
Part names and unctionsFor buttons not explained here, see the page indicated in parentheses ( ).
Front panel
tq w e r
iQ1 Q0Q2Q4Q5
y
uoQ3
qPHONOinputconnectors (7)
wPHONOGNDterminal(7)
ePREOUTconnectors(10)
rPOWERAMPDIRECTINconnectors (9)
tSpeakersystemterminals(SPEAKERESSYSTEMA/B) (6, 7)
yREMOTECONTROLinput/outputconnectors (10)
Rear panel
r t y uw eq
ioQ0Q1Q2
uACinlet(ACIN)(8)
iRECORDER2input/outputconnectors (7)
oRECORDER1input/outputconnectors (7)
Q0AUX/DVDinputconnectors(7)
Q1TUNERinputconnectors(7)
Q2CDinputconnectors (7)
8/8/2019 IBJSC.com | I-WEB.com.vn Manual 1011453510
8/17
5
Getting
started
Troubleshooting
Specifcations
Index
Advancedconnections
Advancedo
peration
Expla
nationterms
ENGLISH
Ba
sicoperation
Basicconnections
Getting
started
Part names and unctions
q
e
t
y
t
r
w
Remote control
n CD operation
n Tuner operation
n DVD operation
n Cassette deck operation
Operation
buttonsFunction
8 9 Skip
2 Stop
1 Playback
3 Pause
0 9 Track selectionT.MODE Sound mode selection
Operation
buttonsFunction
8 9 Skip
2 Stop
1 Playback
3 Pause
MENU Menud f 0 1 Cursor operation
ENTER Enter setting0 9 Enter number
DISPLAYDisplay disc
information
Operation
buttonsFunction
8 Fast-rewind
9 Fast-forward
2 Stop1 Playback
3 PauseCLEAR Counter reset
Operation
buttonsFunction
P.SCAN/A.TUNE preset scan
d/TUNE+ Tuning up
f/TUNE Tuning down
0/PRESETPreset channel
selection
1/PRESET+Preset channel
selection
BAND FM/AM switching0 9 Enter number
CLEARClear memory
or input data
MEMOSave preset
station number
F.DIRECTDirect frequency
tuning
T.MODEAuto stereo/
monaural switching
The remote control buttons may
not unction properly or some
Marantz tuners.
You can use the supplied remote control to operate this unit and
Marantz audio components such as CD players, tuners, DVD players,
and tape decks. See Operating Marantz audio components(vpage5).
qPOWERON/STANDBYbuttons (8) POWER ON button
POWER OFF button
SOURCE POWER button
You can press this button to switch the mode o Marantz audio
components (provided with a power standby unction) between
power-on and standby.
wSOURCEDIRECTbutton (9)
eInputselectorbuttons (5)
rINPUTd/fbuttons (9)
tComponentoperatingbuttons
yVOLUMEadjustmentbuttons (8, 9) MUTE Button
VOLUME + / Button
n Operating Marantz audio components
Operation1 Press the corresponding e Input selector button o the audio
component or selecting the input source to be used in playback
and recording.
The remote control operation is switched to operation mode of the
selected input source.
This units unction will be switched accordingly.
2 Operate the audio component. See the table on the right or the buttons you can use.
The remote control e Input selector buttons are used to select the
input source or this unit and switch the remote control operation
mode at the same time.
You can operate the remote control o this unit regardless o the
remote control mode setting. To use the remote control correctly, also reer t o the operating
instructions o other components.
NOTE
Some input terminals o this unit and corresponding input selector
buttons on the remote control have dierent names, as shown below.
Remotecontrolbuttons TheunitinputterminalsAUX, DVD AUX/DVD
CD-R RECORDER1
TAPE, MD RECORDER2
ENGLISH
8/8/2019 IBJSC.com | I-WEB.com.vn Manual 1011453510
9/17
6
ENGLISH
NOTE
Do not plug in the power cord until all connections have been
completed.
When making connections, also reer to the operating instructions
o the other components.
Be sure to connect the let and right channels properly (let with
let, right with right).
Do not bundle power cords with connection cables. Doing so can
result in humming or noise. Do not turn up the volume without a turntable connected to the
PHONO input terminals. Doing so will cause humming or noise.
Preparations
Connecting cablesSelect the cables according to the equipment being connected.
Audiocables
Analog connections (stereo)
R
L
R
L(L)
(R)
Stereo pin-plug cable
Speaker connections
Speaker cables
NOTE
Connect the speaker cables so they do not stick out o the speaker
terminals. The protection circuit may be activated i the wires touch
the rear panel or i the + and sides touch each other (Protection
circuit).
Never touch the speaker terminals while the power supply is
connected. Doing so could result in electric shock.
n Protection circuitThe protection circuit is be activated in the ollowing situations:
I the speaker cable wire touches the rear panel or screws or ithe speaker cable wire touches the speaker cables + and sides
are touching
I the surrounding temperature is extremely high
I the inside o the amplifer gets hot to extended use at a high
output
I the protection circuit is activated, the speaker output is blocked
and the power indicator ashes in red. I this happens, unplug the
power cord, then check the connections o the speaker cables and
input cables. I the unit becomes very hot, wait or it to cool o and
improve the ventilation around it. Ater doing this, plug the power
cord back in.
I the protection circuit is activated even though there are no
problems with the ventilation around the unit or in connections,
the unit may be damaged. Turn o the power and then contact a
Marantz service center.
Basic connections
Connecting the speakers
Connecting the speakers cablesCareully check the let (L) and right (R) channels and + (red) and
(white) polarities on the speakers being connected to the unit, and be
sure to connect the channels and polarities correctly.
1Peel off about 10 mm of sheathing
from the tip of the speaker cable,
then either twist the core wire tightly
or apply solder to it.
2Turn the speaker terminal
counterclockwise to loosen it.
3Insert the speaker cables core
wire to all the way into the speaker
terminal.
4Turn the speaker terminal clockwise
to tighten it.
Whenusingabananaplug
Tighten the speaker terminal
frmly beore inserting the banana
plug.
Connecting the audio equipment
CautionsonplayingSA(SuperAudio)sources:When regular speakers not compatible with SA sources (DVD Audio discs, Super Audio CDs and other sources, including treble components
above the audible range), set the properties o the player (DVD Audio player, Super Audio CD player, etc.) or use with regular speakers (or
amplifers).
The speakers may be damaged i the volume is set too high when playing SA sources. For instructions on player settings, reer to the
operating instructions included with the player.
ENGLISH
8/8/2019 IBJSC.com | I-WEB.com.vn Manual 1011453510
10/17
7
Getting
started
Ba
sicoperation
Troubleshooting
Specifcations
Index
Advancedconnections
Advancedo
peration
Explanationterms
ENGLISH
Basicconnections
Connecting the speakers
Speaker connections The same signal is output rom the SPEAKERS A and B terminals.
When only one set o speakers is to be connected, use either the SYSTEM A or B terminals.
w qw q
(R)(L)
w qw q
(R)(L)
SpeakersA SpeakersB
n Speaker impedanceUse speakers with impedances within the ranges shown below to suit how they are used.
Speakersused ImpedanceA 4 - 16
B 4 - 16
A and B 8 - 16
Connecting recorders
R
L
AUDIO OUT
R
L
AUDIO
R
L
AUDIO OUT
R
L
AUDIO
AUDIO INAUDIO IN
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
Recorder-1 Recorder-2
Connecting playersA turntable with an MM type cartridge can be connected to this unit. To use an MC cartridge, please
install a step-up transormer.
I humming or other noise is generated when the ground wire is connected, disconnect it.
AUDIO OUT
R
L
AUDIO
AUDIO OUT
R
L
AUDIO
AUDIO OUT
R
L
AUDIO
GNDAUDIO
OUT
R
L
R
L
R
L
R
L
R
L
R
L
R
L
CDplayer
Tuner
Turntable
DVDplayer
Connect the ground wire rom your turntable here.
ENGLISH
8/8/2019 IBJSC.com | I-WEB.com.vn Manual 1011453510
11/17
8
ENGLISH
Connecting the power cordWait until all connections have been completed beore connecting the
power cord.
To household power
outlet
(AC 120 V, 60 Hz)
Power cord
(supplied)
NOTE
Insert the plugs securely. Loose connections will result in the
generation o noise.
Do not use any cord other than the provided power cord.
Basic operation
Button located on both the main unit and
the remote control BUTTONButton only on the main unit Button only on the remote control [BUTTON]
Symbolsusedtoindicatebuttonsinthismanual
VOLUME
SOURCE DIRECT
STANDBYindicator
PHONES jack
Input indicators
[POWER OFF]
[POWER ON]
VOLUME[INPUTd,f]
SOURCE DIRECT
[MUTE]
Beore use
1Turn the VOLUME all the way down.
2Set , , and tothe center positions.
Turning the power onPress . Power is turned on.
Input indicator or the selected source lights.
The unit will be ready to start playback ater several seconds.
Turning the power standbyPress [POWER OFF]. The power is set to the standby mode.
The STANDBY indicator lights in red.
Press[POWER ON] to turn on power rom standby mode. You can also turn on power by using either
rom standby mode.
NOTE
Power continues to be supplied to some o the circuitry even when the
power is in the standby mode. When leaving home or long periods o
time or when going on vacation, either press to turn o thepower, or unplug the power cord rom the power outlet.
Turning the power oPress .
Power is turned o. All indicators will turn o.
ENGLISH
8/8/2019 IBJSC.com | I-WEB.com.vn Manual 1011453510
12/17
9
Getting
started
Basicconnections
Troubleshooting
Specifcations
Index
Advancedconnections
Advancedoperation
Explanationterms
ENGLISH
Ba
sicoperation
Basicconnections
1Use either or [INPUT d,f] toselect an input source you want for playback.The input indicator or the selected source lights.
GSelectablesourcesH
PHONO TUNER CD AUX/DVD RECORDER-1
RECORDER-2
You can also select an input source by pressing the Input selector
buttons o the remote control. The input source you select is stored in memory even ater you turn
o power, and the same source is selected when power is turned
on again.
2Press to select the speaker systemto be used for playback.The indicator or the selected speaker system lights.
3Start playing back the source.
4Adjust the VOLUME to the desired level.
n Adjusting the tone Adjusts the bass sound. Adjusts the midrange sound. Adjusts the treble sound. Adjusts the let and right output balance.
Direct playback using a source audiocomponentSince the audio signals bypass the tone control circuits (BASS/MID/
TREBLE/BALANCE), the music reproduction is more aithul to the
original sound.
Press SOURCE DIRECT.The SOURCE DIRECT indicator lights.
To adjust the tone, turn o SOURCE DIRECT.
Muting sound
This unction mutes the sound by stopping audio output.
Press [MUTE].The MUTE indicator lights.
To cancel the mute operation, press the button again.
You can also cancel the mute operation by operating VOLUME othe remote control.
Using headphone setPlug headphones into PHONES jack. To listen with headphones, turn speaker output OFF.
n Adjusting the volumeAdjust the VOLUME to the desired level.
NOTE
To prevent hearing loss, do not raise the volume level excessively
when using headphones.
Starting Recording1
Use either or [INPUT d,f]toselect the input source you want to record.
2Set the recorder to recording mode.
3Start playback of the source you want to record.
Recording will start i n sync with the playback operation o the
source.
Starting playback Advanced connections
Connecting P.DIRECT connectorsI you use a preamplifer, connect it as shown below, and then you
can use this unit as a power amplifer.
To switch the POWER AMP DIRECT mode, press and
hold for at least 3 seconds.
Switching ON, allows the deviceconnected to the Power Amp Direct connector on the rear panel to
be played. When ON, the input indicator turns o.
Switching OFF, allows the programsource selected using the INPUT SELECTOR knob to be played.When OFF, the input indicator lights up.
For details on operations o the preamplifer, reer to the instruction
manual supplied with the preamplifer to be used.
w qw q
(R)(L)LR
LR
Pre-amplifer
ToPREOUTconnectors
Speaker
(L)Speaker
(R)
NOTE
When the POWER AMP DIRECT is ON, adjustment o thevolume, balance and tone on the main unit has no eect. Adjust the
volume on the input device.
When the POWER AMP DIRECT is ON, the main unit outputsat maximum volume. Check the output level on the input device
beore playing it and adjust the volume accordingly.
Advancedconnections
ENGLISH
8/8/2019 IBJSC.com | I-WEB.com.vn Manual 1011453510
13/17
10
ENGLISH
Connecting the remote control connectors
When you use this unit connected to Marantz audio components, it
sends control signals to operate each component.
n ConnectionUse the remote connection cable (supplied with a Marantz
audio component you want to connect) to connect the REMOTE
CONTROL OUT terminal o this unit to the REMOTE CONTROL IN
terminal o the component to be connected.
n SettingSet the remote control switch located on the rear panel o the
connected audio component to EXTERNAL or EXT. to use
this eature.
This setting will disable remote sensor reception o the connected
audio component.
To operate the connected audio component, point the remote
control at the remote sensor o this unit.
Advanced operations
REMOTE CONTROL
IN OUT
RC OUT
CDplayer Option unit(such as remote control receiver unit)
OUTPUTINPUT
Setting Auto standby modeWith the Auto standby mode ON, this unit will automatically enter
the Auto standby mode ater about 30 continuous minutes o no
output rom the speakers or headphones.
SOURCE DIRECT
Press and hold for at least 5 seconds. Auto standby mode is switched between On and O.
Auto standby mode O
Power indicator
Flashes once
Auto standby mode On
Power indicator
Flashes three times
NOTEPerorm the operation using the buttons on the unit. You cannot
perorm the operation using [SOURCE DIRECT] on the remote control.
The deault setting or the Auto standby mode is OFF.
This unit will automatically enter Auto standby mode ater about
continuous 30 minutes in the ollowing conditions.
No output rom the selected input source.
No operation perormed on the remote control.
No operation o , , or .
Connecting pre out connectorsI you use a power amplifer, connect it as shown below, and then
you can use this unit as a preamplifer.
For connecting speaker systems, reer to the instruction manual
supplied with the power amplifer to be used.
RL
R
L
Power-amplifer
Toinputconnectors
NOTE
NEVER insert the short-circuiting pin plug into the PRE OUT
terminals. Doing so could result in damage.
Signals are output rom the PRE OUT terminals even when using
headphones.
ENGLISH
8/8/2019 IBJSC.com | I-WEB.com.vn Manual 1011453510
14/17
11
Getting
started
Basicconnections
Basicoperation
Troubleshooting
Specifcations
Index
Advancedconnections
Advancedop
eration
Explan
ationterms
Advancedconnections
Advancedop
eration
Iaproblemoccurs,frstchecktheollowing:1.Aretheconnectionscorrect?2.Istheunitbeingoperatedasdescribedintheownersmanual?
3.Aretheothercomponentsoperatingproperly?I this unit does not operate properly, check the items listed in the table below. I the problem persist there may be a malunction.In that case, disconnect the power immediately and contact your retail outlet.
Troubleshooting
Symptom Cause Countermeasure Page
Power i s not turned on. The power cords plug i s not p lugged in f rmly.
The unit is in standby mode.
The protection circuit is activated.
Make sure that the power cord is plugged in properly.
Either turn the INPUT SELECTOR knob o this unit or press POWER ON o the remotecontrol.
I the STANDBY indicator is blinking, turn o power, wait 1 minute or longer, and turn onpower again.
8
8
6
When power is turned on but there is
no sound.
The speaker cables are not properly connected.
The input cable is not properly connected.
The INPUT SELECTOR knob setting position is incorrect.
The VOLUME control knob is set to minimum.
The SPEAKERS A/B switches are turned o.
The incorrect SPEAKERS A/B switch is turned on.
The mute unction activated.
Make sure the speakers are connected properly.
Make sure the input cables are connected properly.
Set the INPUT SELECTOR knob at the correct setting position.
Use the VOLUME control knob to turn volume up to an appropriate level.
Turn on the SPEAKERS A/B switch corresponding to the speaker system termina ls (SYSTEM
A or SYSTEM B) to which the speakers are connected.
Turn on the SPEAKERS A/B switch corresponding to the speaker system termina ls (SYSTEM
A or SYSTEM B) to which the speakers are connected.
I the MUTE indicator is lit, press MUTE on the remote control to cancel muting.
7
7
9
9
9
9
9
The volume drops automatically. The protection circuit is activated. Turn o power, wait 1 minute or longer, and turn on power again. 6
Sound is produced rom either onespeaker only.
The speaker cables are not properly connected. The BALANCE control knob setting position is inappropriate. Make sure that the speakers are connected properly. Set the BALANCE control knob at the appropriate position. 79
The let and right channels arereversed.
Either the let/right speaker or let/right input cableconnections are reversed.
Make sure that the speakers are connected correctly. 7
Noise is produced during a record
playback.
The ground wire from the turntable is disconnected. The PHONO input terminals are not properly connected.
A TV set near the turntable is causing the noise.
Make sure that the PHONO GND terminal is connected properly. Make sure that the PHONO input terminal is connected properly. Relocate the TV set or turntable in another place.
77
An audio eedback occurs when you
turn up the volume during a record
playback.
The turntable and speakers are too close to each other. The turntable is placed on a rack or oor that vibrates easily.
Install the speakers as ar away rom the turntable as possible. I the turntable is not supplied with an insulating pad, use insulating pad available in the
market.
The unit does not unction when a
remote control button is pressed.
Batteries are low. You are operating the remote control outside o the specifed
range. There is an obstacle between the main unit and remote
control.
You have pressed the wrong button. Batteries are not inserted in the proper direction as indicated
by polarity markers (qand w)in the battery compartment.
Replace with new batteries. Operate within the specifed range.
Remote the obstacle.
Press the correct button. Insert the batteries in the proper direction in accordance with the polarity markers in the
battery compartment.
33
3
53
Troubleshooting
ENGLISH
8/8/2019 IBJSC.com | I-WEB.com.vn Manual 1011453510
15/17
12
Poweroutput(20 Hz 20 kHz simultaneous drive o both channels): 70 W x 2 (8 load)
100 W x 2 (4 load)
Totalharmonicdistortion(20Hz 20kHz simultaneous drive o both channels, 8 load): 0.02%
Outputbandwidth(8 load, 0.05%): 5Hz 60kHz
Frequencyresponse(CD, 1W, 8 load): 5Hz 100kHz 3dB
Dumpingactor(8 load, 20Hz 20kHz): 100
Inputsensitivity/InputimpedancePHONO (MM): 2mV/47k
CD, TUNER, AUX/DVD, RECORDER: 200mV/20k
POWER AMP DIRECT IN 1.6V/15k
Outputvoltage/OutputimpedancePRE OUT 1.6V/600
MaximumallowablePHONOinputlevel(1kHz)MM 100mV
RIAAdeviation(20Hz~20kHz) 0.5dB S/N(IHF-A,8load)
PHONO (MM) 87dB (5mV input, 1W output)
CD, TUNER, AUX/DVD, RECORDER 106dB (2V input, Rated output)
POWER AMP DIRECT IN . 125dB (Rated output)
TonecontrolBass (50Hz) 10dBMid (900Hz) 6dB
Treble (15kHz) 10dB
Powerrequirement AC 120V 60Hz Powerconsumption
(UL60065) 200W
Standby power consumption 0.3W
Weight26.9 lbs (12.2kg)
For the purpose o improvement, the specif cations and design are subject to change without notice.
Specifcations Index
vA
Adjusting the tone 9
Adjusting the volume 9
Auto standby mode 10
vB
BALANCE 4, 8
BASS 4, 8
Batteries 3
Beore use 8
vC
Connection
Connecting cables 6
Connecting players 7
Connecting recorders 7
Connecting the speakers 6, 7
v I
INPUT SELECTOR 4, 8
vM
MID 4, 8Mute 4, 8
vP
POWER AMP DIRECT 4, 9
Power cord 8
PRE OUT 4, 10
Protection circuit 6, 12
vR
Remote control 3, 5, 10
vS
SOURCE DIRECT 4, 8
Speaker cables 6, 7Stereo pin-plug cable 6
vT
TREBLE 4, 8
vV
VOLUME 4, 8
PProtectionCircuitThis is a unction to prevent damage to components
within the power supply when an abnormality such
as an overload or excess voltage occurs or any
reason.
In this unit, the STANDBY indicator blinks and the
unit enters standby mode when an abnormality
occurs.
SSpeakerimpedanceThis is certain-rated resistance o the speaker set
to an alternating current and expressed in ohms.
The smaller the impedance, the greater the output.
However, load on the amplifer is increased. Use
speakers whose impedance is supported by this
unit.
Explanation terms
8/8/2019 IBJSC.com | I-WEB.com.vn Manual 1011453510
16/17
PM8004 (unit: inchs (mm))
14
15/16
(379
)
12
15/16
(328.5
)
3/4
(17.
5)
5
1/8
(130)
4
1/2
(113.5
)
17 3/8 (440)
1
5/16
(33)
11/16
(16.
5)
8/8/2019 IBJSC.com | I-WEB.com.vn Manual 1011453510
17/17
D&MHoldingsInc.
PrintedinChina541110491028M