www.att.eu

Stainless Steel Engineering

H y g i e n e a n d S a f e t y p ro d u c t s a n d s o l u t i o n s

ATTHygiene&Safety att@att.eu | www.att.eu | +48 12 290 29 30

2

The dispenser made of AISI 304 stainless steel meets the health and safety standards. Universal design allows usage in most hygienically demanding work environment. The dispenser can be adapted to surfaces such as: tables, shelves, cabinets or it may be combined with other products, such as: dispensers for paper tissues, disposable gloves and head cover nets.

• Stainless steel desinfection pillar• Material: stainless steel AISI 304 (1.4301)• Sheet thickness 2 mm• Plastic pump• Heavy foot plate thickness 4 mm• Brushed surface • 1 l capacity container

General Info

Dispenser

Convenient handle

Mounting holes

Light versionof the dispenser

90 mm

287

mm

mm

mm

ATT Hygiene&Safetyatt@att.eu | www.att.eu | +48 12 290 29 30

3

Features

Custom products

Our dispenser is a simple and effective solution that ensures maximum safety of hand hygiene in the workplace.

Adding disinfectant is simple and requires no additional tools.

The height of the product can be adjusted to customer needs.

We can also make custom products targeted only at your needs.

mm

mm mm

ATTHygiene&Safety att@att.eu | www.att.eu | +48 12 290 29 30

4

Spray desinfection chamber

Simplicity

After entering the disinfection chamber we press the Start button and the disinfectant is applied to the entire surface. While in the chamber, try to rotate 360 degrees, micro droplets of the disinfectant solution penetrate the pores of clothes and settle on the surface, destroying bacterias or preferentially protect against its activity depending on the viricides used. The amount of disinfectant applied does not soak the clothes.

Safety

The closed or transitional construction ensures full safety of using the disinfection chamber. Most of the device components are made of HPC plastic. In our devices we use proven components of renowned European companies and modern solutions targeted at reducing the costs of operating our devices to a minimum.

Standard equipment

- Stainless steel and plastic cabin- Disinfectant dosing pump- Spray nozzles- Control module

Standard features

- Spraying disinfectant- Control enabling programming the time and amount of application of the virucidal solution

Optional equipment

- Control on the Delta operation panel- Startup with a photocell- Dispensing of disinfectant

ATT Hygiene&Safetyatt@att.eu | www.att.eu | +48 12 290 29 30

5

Product disinfection chamber

Simplicity

After inserting the packaging into the disinfection chamber, we press the Start button and the disinfection solution is applied to the outer surface of the packaging. Micro droplets of the disinfectant solution settle on the surface destroying the virus crown or preferentially protecting against its activity depending on the virucidal agents used.

Safety

The closed or transitional construction ensures full safety during the disinfection process. Most of the device components are made of plastic. In our devices we use proven components from reputable European companies and modern solutions targeted at reducing the costs of operating our devices to a minimum.

Standard equipment

- Disinfection cabin- Pump with a disinfectant solution- Air compressor- Spraying nozzles- Control module

Standard features

- Stationary or cruising cabin- Spraying the virucidal ready-made solution- Control enabling programming the time and amount of application of the virucidal solution

Optional equipment

- Control on the Delta operation panel- Startup with a photocell- Dosing of virucidal agent

ATTHygiene&Safety att@att.eu | www.att.eu | +48 12 290 29 30

6

Hand desinfection station

Features

- Driven by servo drive

- Triggering the transition after receiving a dose of soap or disinfectant

- Sound and verbal signaling in the event of improper use of the station

- Traffic lights informing about the lack of disinfectant fluid in the tank / only for disinfectant fluid

- Possibility to connect a card reader

Type ATT-HDS-1

Lenght 955 mm

Width 758 mm

Height 1313 mm

Power supply 230 V

Total power 0,5 kW

Weight ~50 kg

ATT Hygiene&Safetyatt@att.eu | www.att.eu | +48 12 290 29 30

7

Procedure

A - the person leaving the room always has priority

B - the person waiting for entry will receive a green signalwith the option of entering the facility after disinfecting hands

The device will inform the person verbally of incorrect operation if it is performed incorrectly

Control and management of the number of people who can stay in a given facility.

ATTHygiene&Safety att@att.eu | www.att.eu | +48 12 290 29 30

8

Hand desinfection station with a Thermal Imaging Camera

Info

- Mounted at the entrance to the plant or public facility- Forced hand disinfection- The device informs verbally about the incorrect hand disinfection (language options to choose)- Temperature measurement using a thermal imaging camera to identify a person with elevated temperature- Verbal or signaling information in the case of persons with elevated temperature- When the door is blocked, information will be provided to protect the facility

Thermal Camera - Mobotix CCTV THERMO IP

Konica Minolta thermal imaging camera is a new series of camera models equipped with thermal radiometry technology enables automatic generation of alarms when the temperature will fall below or rise above defined limits or ranges values.

This is a key function when detecting anomaly sources while measuring temperature of people

entering the workplace. On the basis of TR windows or complete sensor data, you can configure up to 20 different events dependent on temperature in the measuring range from -40 to + 550 ° C with accuracy up to 0.1 ° C per pixel.

Additionally it is equipped with a black body - calibration device and increasing measurement accuracy.

www.att.eu

Stainless Steel Engineering

H y g i e n e a n d S a f e t y p ro d u c t s a n d s o l u t i o n s

att@att.eu | www.att.eu | +48 12 290 29 30