Hydroscand catalogue.pdf

www.hydroscand.com

Our mission:

To sell and distribute hose and fluid connectors from a decentralized and

customer oriented organization

Quality, environment, a complete range of products and to always be close to our customers are keywords to Hydroscand.

QualityOur aim is to build strong and long-term relations with you as a customer, which means requirements for high and continuous quality. By quality, we mean that our products and services will meet or exceed your needs when it comes to product characteristics, logistic solutions and finance. To achieve all this, and still have competitive prices, your input is very important to us. Only by listening to you, our valued customer, can we constantly improve our service. As an additional step in this process we have been ISO-certified according to ISO-9001 since 1999.

EnvirOnmEntThe environment is precious and it is our responsibility to take care of it. Therefore we have an environmental policy in place to reduce our pollution and contribute to a cleaner environment. We are of course certified according to ISO-14001. You can read more about our environmental policy at www.hydroscand.com.

PrOductsBy listening to your needs, we can quickly adjust our range of products. Our aim is to have the widest range of products on the market of hose and fluid connectors. If there are any products you are missing, do not hesitate to contact us, either at your local Hydroscand depot or send an email to [email protected].

PrOximity tO tHE custOmErFlexibility and service are trademarks of all our Hose Service depots. No matter where you are, you will always find a depot close by with a locally adjusted warehouse and competent staff to share their knowledge with you. All our depots are equipped with the necessary equipment to assembly high pressure hoses and to meet all your requirements.

table of contents

© Hydroscand AB, 2008.All rights are reserved.Nothing in this Product Catalogue may be reproduced, transferred or copied without a written approval by Hydroscand AB.

High Pressure Hoses 7

industrial Hoses 33

Pipes 101

reusable Fittings 105

cross Over Fittings 111

interlock couplings 133

Hose couplings – industrial / Fuel / ac 141

Hose clamps 175

accessories 181

Flanges 191

Quick release couplings, swivel Joints 197

Pipe clamps 223

cutting ring Fittings 237

adaptors 267

Flare Fittings 283

OrFs couplings 295

Ball valves, Filters, measurement Equipment 305

assembling Equipment 313

stainless steel components 327

technical information 361

contact information 385

1

1:4

1:9

5

2

4:2

4:4

5:01

5:20

5:05

5:10

5:70

7:6

6

7

7:7

10

8

9

11

12

4 PrOduct catalOGuE 2009

HydrOscand WE arE HErE!

dEnmark – HydrOscand a/sIndustrivej 51B, 4000 Roskilde Phone: +45 702 028 52 Fax: +45 702 028 53E-mail: [email protected]

Finland – HydrOscand OyOrikedokatu 17, 203 80 TurkuPhone: +35 8 (0) 207 306 630Fax: +35 8 (0) 207 306 631E-mail: [email protected]

nOrWay – HydrOscand asGrorundveien 55 B, N-0976 OsloPhone: +47 22 91 89 00Fax: +47 22 25 69 48E-mail: [email protected]

BElarus – GidrOskandBEl iPDekabristov 29a, Minsk 220089Phone: +375 17 200 84 35 Fax: +375 17 200 84 05E-mail: [email protected]

latvia – HydrOscand siaKrasta iela 105a, LV-1019 RigaPhone: +371 6718 77 78Fax: +371 6718 77 88E-mail: [email protected]

russia – HydrOscand ZaOSalova 27A, 192102, Sankt Peterburg Phone: +7 (821) 320 94 32, -31Fax: +7 (821) 320 09 64

uk – HydrOscand ltdGoodridge Avenue, Industrial Estate Gloucester GL2 5EA Phone: +44 (0) 1452 50 00 73Fax: +44 (0) 1452 30 00 86E-mail: [email protected]

EstOnia – HydrOscand asPeterburi tee 83b, 114 15 Tallinn Phone: +37 2 6831 150 Fax: +37 2 6831 160E-mail: [email protected]

litHuania – HydrOscand uaBSavanorių pr.174 A, Vilnius LT-03153Phone: +370 5 265 3560Fax: +370 5 265 3561Email: [email protected]

sWEdEn – HydrOscand aBBogårdsvägen 43, 128 62 SköndalPhone: +46 8 555 990 00Fax: +46 8 555 990 90E-mail: [email protected]

www.hydroscand.com

WE FOcus On yOu!

alWays clOsE tO yOur nEarEst HOsE cOnnEctOrHYDROSCAND is present in 10 European countires. We have more than 100 local representatives and 500 retailers.

PrOductiOn cEntrEsFrom our 8 OEM production sites around Europe we help our big customers streamlining their production.

We offer custom kits, pre-made assemblies, fittings and adapters delivered straight to the factory floor on time.

sErvicE ExPrEssUnexpected leakage on your machine? No problem. Help is just one phone call or fax away.

Service express is like a mobile Hydroscand store. Fully equipped with assembly tools and our standard assort-ment of hoses and fittings so that a replacement can be done on the site.

Service express is ready seven days a week to help you troubleshooting problems that occur.

HydrOscand dEsiGn & tEst cEntrE

PrOduct saFEty and Quality tEstsIn order to ensure quality and safety, we subject our products to harsh tests before they are released to the market.

The test centre is equipped with machinery to conduct tests according to international standards concerning flex/impulse testing of hose assemblies and accelerated corrosion tests of plated steel products.

Just so that you as a customer can feel confident when choosing our products.

rEsEarcH and dEvElOPmEntA good product can always be better. Having custom-ers from many different areas gives us a strong input to our product development cycle. We use SolidWorks 3D-CAD when we design our fittings optimised for best performance. CAD fittings are also available on-line where you can download them and easily implement them into your design.

Our engineering staff have the tools and expertise to offer special solutions that fit your application.

7PRODUCT CATALOGUE 2009

1

HYDROSCAND HiGH PRESSURE HOSES

PRODUCT GROUP 100 & 110

Our wide range of high pressure hoses are suitable for applications with extremely high pressure, high impulses and high temperatures. The hoses are mainly used for hydraulic applications, high pressure washing, chemicals, gas lines and spray paint applications.

HOSE TYPES

Braided rubber hose

– Up to three braids of high tensile steel wire– Temperature range from -55°C to +155°C – Wide variation of covers and top coatings– Working pressure up to 47.0 MPaThis is a very flexible hose type, suitable for almost all types of hydraulic applications.

Spiral rubber hose

– Up to six spirals of high tensile steel wire

– Temperature range from -40°C to +121°C

– Wide variation of covers and top coatings

– Working pressure up to 50.0 MPa

This hose type is designed for applications with very high pressure combined with high impulses such as hammer hydraulics.

Thermoplastic hose

– Wide variation of reinforcements


– Good abrasion resistant covers


This hose type has outstanding flexibility throughout the temperature range and has a low volumetric expan-sion, giving excellent hydraulic response times.

P.T.F.E.

– Wide variation of reinforcements


– Extremely low frictional characteristics


– Nonflammable

The high molecular weight structure in this type of hose provides an outstanding resistance towards a wide range of chemicals. Combined with their superior non-stick properties and wide temperature range, hoses made of P.T.F.E. are the ideal problem-solvers for virtu-ally all aggressive applications.

Kevlar® and Teflon® are registered trademarks of Du Pont.

WORKiNG PRESSURE iNDEX, SEE CHAPTER 11

RECOmmENDED fLUiDS

Synthetic oil resistant rubber

This inner tube is suitable for fluids such as mineral oil, vegetable oils and synthetic ester-based oil (up to 100°C), glycols and polyglycols, mineral oils in aqueous emulsion, hydrocarbons, water etc.

Polyester

This inner tube is suitable for fluids such as hydrau-lic oil, grease, fuel oils, mineral oils, most phosphate esters and water. It’s also suitable for many industrial gases such as Heliox (max 25% O2), Argon, Nitrogen, carbon dioxide, Helium and air.

Polyamide

This inner tube offers optimal resistance to a wide range of fluids such as paints, chlorinated solvents and other chemicals.

P.T.F.E.

The P.T.F.E. inner tube is resistant to all chemicals and solvents except molten alkali metals and fluorine gas.

ABBREViATiONS

CO Hose type to be used in hard conditions. The cover is resistant to abrasion, ozone and flames.

XA Hose type to be used in severe environmental conditions. With a polymer cover with extra outstanding abrasion and ozone resistance.

PO Hose type to be used in arctic environments. Excellent flexibility throughout the temperature range.

Hydroscand reserves the right to modify any or all parts of this catalogue without any prior notice.

8 PRODUCT CATALOGUE 2009

TABLE Of CONTENTS

1103-03 Kappaflex 1 101105-10 Kappaflex 2K CO 101106-03 Kappaflex 3 111075 Compactflex 111101-00 Egeflex 1 121101-14 Egeflex 1 CO 121102-00 Egeflex 2 131102-14 Egeflex 2 CO 131102-44 Egeflex 2 PO 141110-00/-03 Isobar 10 141003-10 Sae 100 R1AT – Red 151071 Hi-Temp 151087 Marion 2XA 16

STANDARD BRAiDED HYDRAULiC HOSES PAGE P.T.f.E. HOSES PAGE

SPiR STAR PAGE

mULTiSPiRAL HYDRAULiC HOSES PAGE

HiGH PRESSURE WATER CLEANiNG HOSES PAGE

THERmOPLASTiC HOSES PAGE

1015 Deltaflex 161015-14 Deltaflex CO 171118-02 Gammaflex 171142-14 Isobar 42 CO / 1135-14 Isobar 35 CO 181014 Blastopak 18

1054 Pressure Washer Hose HTP-1C 191055 Pressure Washer Hose HTP-2C 19

1031-01 Hydroscand T1111 201032 Hydroscand T1112, Twin 201032 Hydroscand T1113, Triple 211034-01 Hydroscand T1211 211036 Hydroscand T1212, Twin 221037-01 Hydroscand T1121, Paint Spray Hose 221038-01 Hydroscand T1221, Paint Spray Hose 231045-01 Hydroscand T7011 231047 Hydroscand Supertwin T7012, Twin 241049-01 Hydroscand T8011 241052 Hydroscand T8012, Supertwin, Twin 251059-01 Hydroscand T8081 251058-01 Hydroscand T3011 261056-01 Hydroscand T3311 26

1092-01 P.T.F.E. Hose 271093-01 P.T.F.E. Hose 271095 P.T.F.E. Hose, Double Steel Braids 281091 P.T.F.E. Hose, Convoluted 281094 P.T.F.E. Hose, Convoluted Taped 29

1201-11 Spir Star, Type 2W 301201-30 Spir Star, Type 4 301201-40 Spir Star, 6 311201-46 Spir Star, Type 6H 31


1

HYDROSCAND'S CROSSOVER HOSES – fOR THE NEEDS Of TODAY AND TOmORROW!

Hydroscand's CrossOver hoses are a new generation of hydraulic hoses to meet the abrasion and UV radiation requirements of today and tomorrow. CO, an abbreviation of CrossOver, means that the hoses are adjusted to a wider range of usage than before, and with an emphasis on abrasion and ozone resistance. Most of the hoses are also flame resistant according to the latest demands.

Advantages with the CrossOver hoses

□ The CO hoses exceed the demand for abrasion resistance in each standard.

□ They have improved resistance towards UV radiation and therefore also less problems with cracks. A thinner ozone layer around our planet creates larger hose problems!

□ They are desined with very good bend characteristics with preserved pressure performance.

□ Their powerfully improved life length gives shorter standstills and therefore lower costs!

THE CO-PROGRAmmE

Egeflex 1 COA hose equivalent to EN 853 1SN for applications with medium/high pressures and much external abrasion. MSHA, DNV and MED certification guarantee that the hose can be used in many different areas.

Egeflex 2 COA hose equivalent to EN 853 2SN for normal working pressures and characteristics. MSHA, DNV and MED certification guarantee that the hose can be used in many different areas.

Kappaflex 2K COA compact-built hose with fitted measurements and tight bend radius that can handle higher pressures than EN 857 2SC. MSHA, DNV and MED certifications guarantee that the hose can be used in many different areas.

Deltaflex 4 COA braided hose with four layers that exceeds the demands for EN 856 4SP. High working pressure and very flexible. Has been certified by Det Norske Veritas (DNV).

ISO BAR 42 CO A multi spiral hose with four, or alternatively six de-pending on dimension, spirals. The hose is designed for very extreme working pressures but still have the flex-ibility intact. MSHA, DNV and MED certification guaran-tee that the hose can be used in many different areas.


1103-03 KAPPAfLEX 1

1105-10 KAPPAfLEX 2K CO

ConstructionInner tube: Synthetic oil resistant rubberCover: Weather and oil resistant rubberReinforcement: One braid of compact steel wireSafety factor: 4:1Temperature: -40°C – +100°CDesign: Grey and orange label, wrapped

Applications/CharacteristicsA hose for low to medium pressure and return lines (10.0–29.0 MPa). Exceeds EN 857 1SC.

Ferrule: 4200-07-xxProduct group: 100

ConstructionInner tube: Synthetic oil resistant rubberCover: Durable; weather and oil resistant rubberReinforcement: Two braids of compact steel wireSafety factor: 4:1Temperature: -40°C – +100°CDesign: Green label, wrapped

Applications/CharacteristicsOzone resistant hose for applications with high pressures, well suited for marine applications. Exceeds EN 857 2SC.

Ferrule: 4200-11-xx, 4200-23-xxProduct group: 100

Part ID ID OD Work pr. Bend rad. Weight number mm inch mm MPa mm kg/m


1103-03-04 6.5 1/4" 11.8 29.0 40 0.181103-03-05 8.0 5/16" 13.6 25.0 55 0.221103-03-06 9.5 3/8" 16.5 23.0 65 0.291103-03-08 13.0 1/2" 19.0 20.0 80 0.351103-03-10 16.0 5/8" 22.3 15.0 105 0.431103-03-12 19.0 3/4" 26.2 12.5 120 0.571103-03-16 25.0 1" 34.0 11.0 160 0.821103-03-20 32.0 1 1/4" 44.0 10.0 300 1.28

1105-10-04 6.5 1/4" 13.4 45.0 45 0.291105-10-05 8.0 5/16" 15.0 42.0 60 0.341105-10-06 9.5 3/8" 17.4 38.5 70 0.441105-10-08 13.0 1/2" 20.6 34.5 90 0.541105-10-10 16.0 5/8" 23.7 29.0 130 0.631105-10-12 19.0 3/4" 27.7 28.0 160 0.841105-10-16 25.0 1" 35.6 20.0 210 1.14

Certificate MED


1

1106-03 KAPPAfLEX 3

1075 COmPACTfLEX

ConstructionInner tube: Synthetic oil resistant rubberCover: Weather and oil resistant rubberReinforcement: Three braids of compact steel wireSafety factor: 4:1Temperature: -40°C – +100°CDesign: Grey and orange label, wrapped

Applications/CharacteristicsThis hose is suitable for applications with very high pressures (47.0–32.7 MPa). Exceeds EN 857 2SC (40.0–16.5 MPa).


ConstructionInner tube: Synthetic oil resistant rubberCover: Weather and oil resistant rubberReinforcement: One braid of compact steel wireSafety factor: 4:1Temperature: -40°C – +100°CDesign: Smooth, white text

Applications/CharacteristicsThe hose is suitable when, in standard hydraulics, there is a need for a very compact and flexible hose. Equivalent to SAE 100 R16.




1106-03-08 13.0 1/2" 24.3 47.0 210 0.901106-03-10 16.0 5/8" 28.0 41.0 250 1.051106-03-12 19.0 3/4" 31.5 37.5 290 1.401106-03-16 25.0 1" 39.8 32.7 340 1.88

1075-00-04 6.0 1/4" 13.0 34.5 51 0.251075-00-05 8.0 5/16" 14.7 29.5 57 0.301075-00-06 9.0 3/8" 17.0 27.5 63 0.371075-00-08 13.0 1/2" 20.3 24.0 89 0.481075-00-10 16.0 5/8" 23.4 19.0 102 0.581075-00-12 19.0 3/4" 27.2 15.5 120 0.69


1101-00 EGEfLEX 1

1101-14 EGEFLEX 1 CO

ConstructionInner tube: Synthetic oil resistant rubberCover: Weather and oil resistant rubberReinforcement: One braid of steel wireSafety factor: 4:1Temperature: -40°C – +100°CDesign: White text, wrapped

Applications/CharacteristicsA hose for applications with medium pressure and return lines. Equivalent to EN 853 1SN (25.0–4.0 MPa).


ConstructionInner tube: Synthetic oil resistant rubberCover: Weather and oil resistant rubberReinforcement: One braid of steel wireSafety factor: 4:1Temperature: -40°C – +100°CDesign: Blue label, wrapped

Applications/CharacteristicsOzone resistant hose for applications with medium/high pressures and much ex-ternal abrasion. Equivalent to EN 853 1SN (25.0–4.0 MPa). The hose is approved by MSHA (flame resistant).

Ferrule: 4200-11-xx, 4200-21-xx (3/16"–1"), 4200-23-xx (1"–2")Product group: 100



1101-00-03 5.0 3/16" 11.8 25.0 90 0.191101-00-04 6.5 1/4" 13.4 22.5 100 0.211101-00-05 8.0 5/16" 15.0 21.5 115 0.241101-00-06 9.5 3/8" 17.4 18.0 130 0.331101-00-08 13.0 1/2" 20.6 16.0 180 0.411101-00-10 16.0 5/8" 23.7 13.0 200 0.451101-00-12 19.0 3/4" 27.7 10.5 240 0.581101-00-16 25.0 1" 35.6 8.8 300 0.881101-00-20 32.0 1 1/4" 43.5 6.3 420 1.221101-00-24 38.0 1 1/2" 50.6 5.0 500 1.471101-00-32 51.0 2" 64.0 4.0 630 1.98

1101-14-03 5.0 3/16" 11.8 25.0 90 0.191101-14-04 6.5 1/4" 13.4 22.5 100 0.211101-14-05 8.0 5/16" 15.0 21.5 115 0.241101-14-06 10.0 3/8" 17.4 18.0 125 0.331101-14-08 13.0 1/2" 20.6 16.0 180 0.411101-14-10 16.0 5/8" 23.7 13.0 200 0.451101-14-12 19.0 3/4" 27.7 10.5 240 0.581101-14-16 25.0 1" 35.6 8.8 300 0.881101-14-20 32.0 1 1/4" 43.5 6.3 420 1.231101-14-24 38.0 1 1/2" 50.6 5.0 500 1.511101-14-32 51.0 2" 64.0 4.0 630 1.97

Certificate MED


1

1102-00 EGEfLEX 2

1102-14 EGEFLEX 2 CO

ConstructionInner tube: Synthetic oil resistant rubberCover: Weather and oil resistant rubberReinforcement: Two braids of steel wireSafety factor: 4:1Temperature: -40°C – +100°CDesign: Embossed branding line, wrapped

Applications/CharacteristicsA hose for applications with medium to high pressures. Equivalent to EN 857 2SN (41.5–8.0 MPa).

Ferrule: 4200-12-xx, 4200-22-xx, 4200-23-xxProduct group: 100

ConstructionInner tube: Synthetic oil resistant rubberCover: Abrasion, weather and heat resistant synthetic rubberReinforcement: Two braids of steel wire Safety factor: 4:1Temperature: -40°C – +100°CDesign: Orange label, wrapped

Applications/CharacteristicsA hose for applications with medium to high pressures and a lot of external abrasion. Equivalent to EN 853 2SN. Approved by MSHA (flame resistant). The certificates refer to dimensions 3/16" – 1".




1102-00-03 5.0 3/16" 13.4 41.5 90 0.311102-00-04 6.5 1/4" 15.0 40.0 100 0.331102-00-05 8.0 5/16" 16.6 35.0 115 0.391102-00-06 9.5 3/8" 19.0 33.0 130 0.501102-00-08 13.0 1/2" 22.2 27.5 180 0.591102-00-10 16.0 5/8" 25.4 25.0 200 0.711102-00-12 19.0 3/4" 29.3 21.5 240 0.861102-00-16 25.0 1" 38.1 16.5 300 1.281102-00-20 32.0 1 1/4" 48.3 12.5 420 2.041102-00-24 38.0 1 1/2" 54.6 9.0 500 2.271102-00-32 51.0 2" 67.0 7.8 630 2.87

1102-14-03 5.0 3/16" 13.4 41.5 90 0.311102-14-04 6.5 1/4" 15.0 40.0 100 0.331102-14-05 8.0 5/16" 16.6 35.0 115 0.391102-14-06 9.5 3/8" 19.0 33.0 130 0.501102-14-08 13.0 1/2" 22.2 27.5 180 0.591102-14-10 16.0 5/8" 25.4 25.0 200 0.711102-14-12 19.0 3/4" 29.3 21.5 240 0.861102-14-16 25.0 1" 38.1 16.5 300 1.281102-14-20 32.0 1 1/4" 48.3 12.5 420 2.041102-14-24 38.0 1 1/2" 54.6 9.0 500 2.271102-14-32 51.0 2" 67.0 8.0 630 2.87

Certificate MED


1102-44 EGEFLEX 2 PO

1110-00/-03 iSOBAR 10

ConstructionInner tube: Cold and oil resistant rubberCover: Cold, weather and oil resistant rubberReinforcement: Two braids of steel wireSafety factor: 4:1Temperature: -50°C – +100°CDesign: Grey, blue and orange lable, wrapped

Applications/CharacteristicsA hose for applications with medium to high pressures. The hose is made to be used in arctic environments. Excellent flexibility throughout the whole temperature range. Equivalent to EN 853 2SN (41.5–8.0 MPa).


ConstructionInner tube: Synthetic oil resistant rubberCover: Weather and oil resistant rubberReinforcement: One braid of steel wireSafety factor: 4:1Temperature: -40°C – +100°CDesign: 1110-00 Embossed brading line, wrapped 1110-03 Blue and white lable, wrapped

Applications/CharacteristicsThe hose is especially developed for pilot lines, but can also be used for low pressure lines with assembling restrictions.




1102-44-04 6.5 1/4" 15.0 40.0 100 0.331102-44-06 9.5 3/8" 19.0 33.0 130 0.501102-44-08 13.0 1/2" 22.2 27.5 180 0.59

Other dimensions are available upon request.

1110-00-06 9.5 3/8" 14.8 10.0 40 0.211110-00-08 13.0 1/2" 18.0 10.0 50 0.27

1110-03-06 9.5 3/8" 14.8 10.0 40 0.211110-03-08 13.0 1/2" 18.0 10.0 50 0.27


1

1003-10 SAE 100 R1AT – RED

1071 Hi-TEmP

ConstructionInner tube: Synthetic oil resistant rubberCover: Heat and abrasion resistant rubberReinforcement: One braid of steel wireSafety factor: 4:1Temperature: -40°C – +100°CDesign: Red cover, white text

Applications/CharacteristicsThe hose is made for fire extinguishing applications.


ConstructionInner tube: Synthetic oil and heat resistant rubberCover: Synthetic abrasion resistant rubberReinforcement: One braid of steel wireSafety factor: 4:1Temperature: -40°C – +150°CDesign: Wrapped, white text

Applications/CharacteristicsThe hose is suitable for hydraulic pipes, truck engines, transportation of oil and gasoline with extra high temperature. It is also available in pin-pricked design for compressor applications.




1003-10-04 6.0 1/4" 14.2 19.0 95 0.251003-10-06 9.0 3/8" 18.1 15.5 110 0.361003-10-08 13.0 1/2" 21.5 14.0 160 0.451003-10-12 19.0 3/4" 28.6 8.5 220 0.651003-10-16 25.0 1" 36.6 7.0 275 0.91

1071-00-04 6.4 1/4" 13.4 22.5 100 0.211071-00-06 9.5 3/8" 17.4 18.0 130 0.33 1071-00-08 12.7 1/2" 20.6 16.0 180 0.411071-00-10 15.9 5/8" 23.7 13.0 200 0.451071-00-12 19.1 3/4" 27.7 10.5 240 0.581071-00-16 25.4 1" 35.6 8.8 300 0.881071-00-20 31.8 1 1/4" 43.5 6.3 420 1.231071-00-24 38.1 1 1/2" 50.6 5.0 500 1.511071-00-32 51.0 2" 64.0 4.0 630 1.97

Certificate MED


1087 mARiON 2XA

1015 DELTAfLEX

ConstructionInner tube: Syntetic oil resistant rubberCover: Synthetic rubberTop cover: Extra durable polymetric coatingReinforcement: Two braids of compact steel wire Safety factor: 4:1Temperature: -40°C – +100°C, temporarily 120°CDesign: Black, smooth

Applications/CharacteristicsThe hose is suitable when there are demands for high pressures and compact dimen-sions. The top cover of polymer has a low level of friction and is extremely durable. Equivalent to EN 857 2SC (40.0–16.5 MPa).


ConstructionInner tube: Synthetic oil resistant rubberCover: Weather and oil resistant rubberReinforcement: Four spirals of steel wireSafety factor: 4:1Temperature: -40°C – +100°CDesign: Yellow marking, wrapped

Applications/CharacteristicsThe hose is equivalent to, or exceeds, EN 856 4SP regarding pressure.

Ferrule: 4200-19-xx, 4200-20-xx, 4400-09-xx, 4500-11-xxProduct group: 110



1087-00-04 6.5 1/4" 14.2 40.0 75 0.281087-00-06 9.5 3/8" 18.3 35.0 90 0.421087-00-08 13.0 1/2" 21.5 30.0 130 0.521087-00-10 16.0 5/8" 24.7 27.5 170 0.611087-00-12 19.0 3/4" 28.6 23.5 200 0.791087-00-16 25.0 1" 36.6 18.5 250 1.10

1015-00-04 6.0 1/4" 17.8 50.0 120 0.731015-00-06 9.0 3/8" 21.4 44.5 130 0.911015-00-08 13.0 1/2" 24.6 41.5 180 1.081015-00-10 16.0 5/8" 28.5 39.0 225 1.391015-00-12 19.0 3/4" 32.0 35.0 280 1.731015-00-16 25.0 1" 38.8 31.0 355 2.311015-00-20 32.0 1 1/4" 47.5 28.0 460 3.071015-00-24 38.0 1 1/2" 53.5 26.0 560 3.561015-00-32 50.0 2" 67.0 21.0 710 4.25

The hose is also available in CO-design with MSHA approval , see 1015-14-xx.

Certificate MED


1

1015-14 DELTAFLEX CO

1118-02 GAmmAfLEX


Applications/CharacteristicsThe hose is equivalent to, or exceeds EN 856 4SP regarding pressure. Aditionally, the hose is extra abrasion resistant. The hose is approved by MSHA.



Applications/CharacteristicsThe hose is equivalent to EN 856 4SH and approved by MSHA (flame resistant).




1015-14-04 6.0 1/4" 17.8 50.0 120 0.731015-14-06 9.0 3/8" 21.4 44.5 130 0.911015-14-08 13.0 1/2" 24.6 41.5 180 1.081015-14-10 16.0 5/8" 28.5 39.0 225 1.391015-14-12 19.0 3/4" 32.0 35.0 280 1.731015-14-16 25.0 1" 38.8 31.0 355 2.311015-14-20 32.0 1 1/4" 47.5 28.0 460 3.071015-14-24 38.0 1 1/2" 53.5 26.0 560 3.561015-14-32 50.0 2" 67.0 21.0 710 4.25

1118-02-12 19.0 3/4" 32.2 42.0 280 1.531118-02-16 25.0 1" 38.4 38.0 340 2.141118-02-20 32.0 1 1/4" 45.2 32.5 460 2.491118-02-24 38.0 1 1/2" 53.5 29.0 560 3.381118-02-32 50.0 2" 68.0 25.0 710 4.70

Certificate


1142-14 ISOBAR 42 CO / 1135-14 ISOBAR 35 CO

1014 BLASTOPAK

ConstructionInner tube: Syntetic oil resistant rubberCover: Synthetic abrasion, weather and heat resistant rubberReinforcement: ID 19–25: Four spirals of steel wire ID 32–51: Six spirals of steel wire Safety factor: 4:1Temperature: -40°C – +121°CDesign: Red, black and white marking, wrapped

Applications/CharacteristicsThe hose is suitable for very high pressures in combination with very high impulses and a lot of external abrasion. The hose is MSHA approved (flame resistant). ID 3/4" – 1 1/2" is equivalent to, or exceeds, SAE 100 R15. ID 2" is equivalent to, or exceeds, SAE 100 R13.


ConstructionInner tube: Synthetic oil and water resistant rubberCover: Extra abrasion resistant, synthetic rubberReinforcement: Dim 6 & 10mm: Four spirals and one braid of steel wire Dim 12: Four spirals of steel wire Dim 19 & 25mm: Six spirals of steel wireSafety factor: 2.5:1Temperature: -40°C – +120°CDesign: Wrapped

Applications/CharacteristicsThe hose is suitable for water blasting with extremely high pressures. The hose is de-signed for static water pressures but is not suitable for hydraulic applications.




1142-14-12 19.0 3/4" 32.2 42.0 267 1.551142-14-16 25.0 1" 38.7 42.0 330 2.101142-14-20 32.0 1 1/4" 50.4 42.0 445 3.651142-14-24 38.0 1 1/2" 57.9 42.0 533 5.001135-14-32 51.0 2" 70.5 35.0 630 7.09

The hose is also available in XA-design.

1014-00-06 9.5 3/8" 25.1 100.0 130 1.201014-00-08 13.0 1/2" 27.8 100.0 200 1.251014-00-12 19.0 3/4" 36.0 100.0 250 1.701014-00-16 25.0 1" 42.0 80.0 300 2.50

Certificate


1

1054 PRESSURE WASHER HOSE HTP-1C

1055 PRESSURE WASHER HOSE HTP-2C

ConstructionInner tube: Synthetic temperature resistant rubberCover: Abrasion resistant rubberReinforcement: One braid of compact steel wireSafety factor: 2.5:1Temperature: -40°C – +155°CDesign: Black or blue pin-pricked cover

Applications/CharacteristicsThis hose is intended for pressure washers where low weight and pliability is required. Available in black, oil resistant rubber for workshops and flush halls; and in blue for sen-sitive environments.


ConstructionInner tube: Synthetic temperature resistant rubberCover: Abrasion resistant rubberReinforcement: Two braids of compact steel wireSafety factor: 2.5:1Temperature: -40°C – +155°CDesign: Black or blue pin-pricked cover

Applications/CharacteristicsThis hose is intended for pressure washers where there are high demands regarding pressure, temperature and pliability. Available in black, oil resistant rubber for workshops and flush halls; and in blue for sensitive environments.


Part ID ID OD Work pr. Bend rad. BP Cover Weight number mm inch mm MPa mm MPa kg/m

Part ID ID OD Work pr. Bend rad. BP Cover Weight number mm inch mm MPa mm MPa kg/m

1054-01-05 8.0 5/16" 14.0 34.4 85 86 Black 0.221054-01-06 9.5 3/8" 15.6 28.8 90 72 Black 0.281054-02-04 6.0 1/4" 12.2 36.0 75 90 Blue 0.181054-02-05 8.0 5/16" 13.6 34.4 85 86 Blue 0.211054-02-06 9.5 3/8" 15.5 28.8 90 72 Blue 0.281054-02-08 12.7 1/2" 19.0 25.6 130 64 Blue 0.35

1055-01-05 8.0 5/16" 15.0 56.0 85 140 Black 0.341055-01-06 9.5 3/8" 17.1 52.8 90 132 Black 0.421055-02-05 8.0 5/16" 15.0 56.0 85 140 Blue 0.341055-02-06 9.5 3/8" 17.1 52.8 90 132 Blue 0.421055-02-08 12.7 1/2" 20.7 44.0 130 110 Blue 0.59


1031-01 HYDROSCAND T1111

1032 HYDROSCAND T1112, TWiN

ConstructionInner tube: Seamless polyester elastomerCover: Oil, weather and abrasion resistant polyurethaneReinforcement: One braid of steel wire Safety factor: 4:1Temperature: -40°C – +100°C, air and water max +70°CDesign: Black cover, pin-pricked

Applications/CharacteristicsThe hose is well suitable for high pressure hydraulics, high pressure gas applications as well as pressure washers. Due to the inner tube of polyester, the hose will retain its flex-ibility in cold temperatures.


ConstructionInner tube: Seamless polyester elastomerCover: Oil, weather and abrasion resistant polyurethaneReinforcement: One braid of steel wire Safety factor: 4:1Temperature: -40°C – +100°C, air and water max +70°CDesign: Supertwin, black cover, pin-pricked





1031-01-03 5.0 3/16" 9.7 36.0 30 0.121031-01-04 6.5 1/4" 11.7 31.0 40 0.151031-01-05 8.0 5/16" 13.2 25.0 55 0.191031-01-06 10.0 3/8" 16.5 22.5 65 0.221031-01-08 13.0 1/2" 18.8 19.0 85 0.291031-01-10 16.0 5/8" 22.0 14.0 115 0.331031-01-12 19.0 3/4" 25.8 11.5 145 0.431031-01-16 25.0 1" 33.0 9.5 180 0.62

1032-03-03 5.0 3/16" 9.7 36.0 30 0.241032-04-04 6.5 1/4" 11.7 31.0 40 0.301032-05-05 8.0 5/16" 13.2 25.0 55 0.381032-06-06 10.0 3/8" 16.5 22.5 65 0.44 1032-08-08 13.0 1/2" 18.8 19.0 85 0.58


1

1032 HYDROSCAND T1113, TRiPLE


ConstructionInner tube: Seamless polyester elastomerCover: Oil, weather and abrasion resistant polyurethaneReinforcement: One braid of steel wire Safety factor: 4:1Temperature: -40°C – +100°C, air and water max +70°CDesign: Triple, black cover, pin-pricked



ConstructionInner tube: Seamless polyester elastomerCover: Oil and abrasion resistant polyurethaneReinforcement: Two braids of steel wire Safety factor: 4:1Temperature: -40°C – +100°C, air and water max +70°CDesign: Black cover, pin-pricked

Applications/CharacteristicsThis hose is well suited for high pressure hydraulics and high pressure gas applications. Due to the inner tube of polyester, the hose will retain its flexibility in cold temperatures.




1032-04-04-04 6.5 1/4" 11.7 31.0 40 0.451032-06-06-06 10.0 3/8" 15.9 22.5 65 0.661032-08-08-08 13.0 1/2" 18.8 19.0 85 0.87

1034-01-04 6.0 1/4" 12.8 40.0 40 0.241034-01-06 10.0 3/8" 16.8 33.0 65 0.371034-01-08 13.0 1/2" 20.2 26.0 85 0.451034-01-10 16.0 5/8" 23.5 22.0 115 0.561034-01-12 19.0 3/4" 27.5 15.0 170 0.70


1036 HYDROSCAND T1212, TWiN

1037-01 HYDROSCAND T1121, PAiNT SPRAY HOSE

ConstructionInner tube: Seamless polyester elastomerCover: Oil and abrasion resistant polyurethaneReinforcement: Two braids of steel wire Safety factor: 4:1Temperature: -40°C – +100°C, air and water max +70°CDesign: Supertwin, black cover, pin-pricked

Applications/CharacteristicsThis hose is well suited for high pressure hydraulics and high pressure gas applications. Due to the inner tube of polyester, the hose will retain its flexibility in cold temperatures.


ConstructionInner tube: Seamless polyamideCover: PolyurethaneReinforcement: One braid of steel wire Safety factor: 4:1Temperature: -40°C – +100°C, air and water max +70°CDesign: Blue cover

Applications/CharacteristicsThe hose is well suitable for spray paint applications, dissolvents and other chemicals. The steel reinforcement provides electrical conductivity through the hose. Should be checked after mounting the fittings.




1036-06-06 10.0 3/8" 16.8 33.0 65 0.761036-08-08 13.0 1/2" 20.2 26.0 85 0.90

1037-01-03 5.0 3/16" 9.7 36.0 30 0.111037-01-04 6.5 1/4" 11.7 31.0 40 0.151037-01-06 10.0 3/8" 16.5 22.5 65 0.221037-01-08 13.0 1/2" 18.8 19.0 85 0.29


1

1038-01 HYDROSCAND T1221, PAiNT SPRAY HOSE


ConstructionInner tube: Seamless polyamide / Nylon 6Cover: PolyurethaneReinforcement: Two braids of steel wire Safety factor: 4:1Temperature: -40°C – +100°C, air and water max +70°CDesign: Blue cover, pin-pricked

Applications/CharacteristicsPaint spray hose for high pressures. It is well suitable for spray paint applications, dis-solvents and other chemicals. The steel reinforcement provides electrical conductivity through the hose. Should be checked after mounting the fittings.


ConstructionInner tube: Polyester elastomerCover: Oil and abrasion resistant polyurethaneReinforcement: One braid of polyester Safety factor: 4:1Temperature: -40°C – +100°C, air and water max +70°CDesign: Black cover, pin-pricked

Applications/CharacteristicsThis hose is well suited for hydraulics, grease gun systems and gas applications. Due to the inner tube of polyester, the hose will retain its flexibility in cold temperatures. Equivalent to SAE 100 R7.




1038-01-04 6.5 1/4" 12.8 40.0 40 0.251038-01-06 10.0 3/8" 16.8 33.0 65 0.381038-01-08 13.0 1/2" 20.2 26.0 85 0.45

1045-01-02 3.5 1/8" 8.3 21.0 25 0.051045-01-03 5.0 3/16" 9.6 21.0 25 0.061045-01-04 6.5 1/4" 12.2 21.0 35 0.101045-01-05 8.0 5/16" 14.3 19.0 45 0.131045-01-06 10.0 3/8" 16.0 16.0 55 0.151045-01-08 13.0 1/2" 20.3 14.0 75 0.221045-01-12 19.0 3/4" 27.1 9.0 140 0.331045-01-16 25.0 1" 34.0 7.0 190 0.46


1047 HYDROSCAND SUPERTWIN T7012, TWIN


ConstructionInner tube: Polyester elastomerCover: Oil and abrasion resistant polyurethaneReinforcement: One braid of polyester Safety factor: 4:1Temperature: -40°C – +100°C, air and water max +70°CDesign: Supertwin, pin-pricked

Applications/CharacteristicsThis hose is well suited for hydraulics and gas applications. The hose retains its flexibility in cold temperatures. Equivalent to SAE 100 R7.


ConstructionInner tube: Polyester elastomerCover: Oil and abrasion resistant polyurethaneReinforcement: One or two braids of aramid (Kelvar®)Safety factor: 4:1Temperature: -40°C – +100°C, air and water max +70°CDesign: Black cover, pin-pricked

Applications/CharacteristicsThe hose is well suitable for high pressure hydraulics and high pressure gas applications. Due to the inner tube of polyester, the hose will retain its flexibility in cold temperatures. Equivalent to SAE 100 R8 regarding pressure and SAE 100 R7 regarding dimensions.

Ferrule: 4200-27-xx, 4200-28-08 (1/2" only)Product group: 110



1047-03-03 5.0 3/16" 9.6 21.0 25 0.121047-04-04 6.5 1/4" 12.2 21.0 35 0.191047-05-05 8.0 5/16" 14.3 19.0 45 0.251047-06-06 10.0 3/8" 16.0 16.0 55 0.291047-08-08 13.0 1/2" 20.3 14.0 75 0.43

1049-01-03 5.0 3/16" 8.9 35.0 30 0.051049-01-04 6.5 1/4" 11.5 35.0 50 0.081049-01-06 10.0 3/8" 15.5 28.0 60 0.131049-01-08 13.0 1/2" 19.9 24.5 80 0.20 1049-01-12 19.0 3/4" 26.9 16.5 150 0.32


1

1052 HYDROSCAND T8012, SUPERTWiN, TWiN


ConstructionInner tube: Polyester elastomerCover: Oil and weather resistant polyurethaneReinforcement: One braid of aramid (Kelvar®)Safety factor: 4:1Temperature: -40°C – +100°C, air and water max +70°CDesign: Supertwin, pin-pricked

Applications/CharacteristicsThe hose is well suitable for high pressure hydraulics when there is a need for twin hoses with textile reinforcements. Equivalent to SAE 100 R8 regarding pressure and SAE 100 R7 regarding dimensions.

Ferrule: 4200-27-06, 4200-28-08 (1/2" only)Product group: 110

ConstructionInner tube: Polyester elastomerCover: PolyurethaneReinforcement: One braid of aramid (Kelvar®) Safety factor: 4:1Temperature: -40°C – +100°C, air and water max +70°CDesign: Orange cover, pin-pricked

Applications/CharacteristicsThis hose is well suited for high pressure hydraulics and high pressure lines. Due to the inner tube of polyester, the hose will retain its flexibility in cold temperatures. Equivalent to SAE 100 R7.

Ferrule: 4200-27-xx, 4200-28-08 (1/2" only)Product group: 110



1052-04-04 6.5 1/4" 11.5 35.0 30 0.161052-06-06 10.0 3/8" 15.5 28.0 60 0.261052-08-08 13.0 1/2" 19.9 24.5 80 0.40

1059-01-04 6.5 1/4" 11.5 35.0 50 0.081059-01-06 10.0 3/8" 15.5 28.0 60 0.131059-01-08 13.0 1/2" 19.9 24.5 80 0.20




ConstructionInner tube: Polyester elastomerCover: Oil and abrasion resistant polyurethane, pin-prickedReinforcement: One or two braids of aramid (Kelvar®) and one braid of steel wire Safety factor: 4:1Temperature: -40°C – +100°C, water max +70°CDesign: Black cover

Applications/CharacteristicsThis hose is suited for hydraulics with very high pressures, e.g. high pressure pumps and heavy duty applications. Due to the inner tube of polyester, the hose will retain its flexibility in cold temperatures.

Product group: 110

ConstructionInner tube: Polyester elastomerCover: Oil, weather and abrasion resistant polyurethane, pin-prickedReinforcement: Two braids of aramid (Kelvar®) and one braid of steel wire Safety factor: 4:1Temperature: -40°C – +100°C, water max +70°CDesign: Black cover

Applications/CharacteristicsThis hose is suited for hydraulics with very high pressures, e.g. high pressure pumps and heavy duty applications. Due to the inner tube of polyester, the hose will retain its flexibility in cold temperatures.

Product group: 110



1058-01-04 6.6 1/4" 12.7 70.0 35 0.191058-01-06 9.8 3/8" 18.4 70.0 90 0.33

1056-02-04 6.6 1/4" 14.3 80.0 35 0.25


1

1092-01 P.T.f.E. HOSE

ConstructionInner tube: Smooth P.T.F.E. (Teflon®)Reinforcement: One braid of stainless steel wireSafety factor: 4:1Temperature: -60°C – +260°C

Applications/CharacteristicsA very suitable hose for hazardous environments together with dissolvents, paint, hy-draulic oils, food as well as other applications where high temperature, high pressure and resistance towards chemicals are needed along with elastic characteristics. Age resistant.


1093-01 P.T.f.E. HOSE

ConstructionInner tube: Smooth P.T.F.E. (Teflon®), heavy wallReinforcement: One braid of stainless steel wireSafety factor: 4:1Temperature: -60°C – +260°C

Applications/CharacteristicsThe hose is suitable for very demanding material transportation. A very robust hose, es-pecially suitable for low, oscillating temperatures. Age resistant.


Part ID nom ID OD nom WP Bend rad. number mm inch mm MPa mm


1092-01-02 3.4 1/8" 6.2 24.2 381092-01-03 5.1 3/16" 8.1 19.8 641092-01-04 6.7 1/4" 9.4 16.8 761092-01-05 8.4 5/16" 11.1 15.5 1021092-01-06 10.0 3/8" 12.7 13.8 1271092-01-08 13.2 1/2" 16.6 12.1 1521092-01-10 16.6 5/8" 19.8 8.6 1781092-01-12 19.8 3/4" 23.0 7.8 2031092-01-16 26.1 1" 29.3 6.0 305

1093-01-04 6.7 1/4" 10.1 17.3 511093-01-05 8.4 5/16" 11.7 16.0 761093-01-06 10.0 3/8" 13.4 13.8 831093-01-08 13.4 1/2" 16.8 12.4 1021093-01-10 16.6 5/8" 20.1 8.6 1271093-01-12 19.8 3/4" 23.2 7.8 1781093-01-16 26.1 1" 29.5 5.3 292


1095 P.T.f.E. HOSE, DOUBLE STEEL BRAiDS

ConstructionInner tube: Smooth P.T.F.E. (Teflon®)Reinforcement: Double braids of stainless steel wireSafety factor: 4:1Temperature: -60°C – +260°C

Applications/CharacteristicsA very suitable hose for hazardous environments together with dissolvents, paint, fuels, hydraulic oils, food as well as other applications where high temperature, high pressure and resistance towards chemicals are needed along with elastic characteristics. Age resistant.


1091 P.T.f.E. HOSE, CONVOLUTED

ConstructionInner tube: Convulted P.T.F.E. (Teflon®)Reinforcement: One braid of stainless steel wire, SS 2330Safety factor: 4:1Temperature: -70°C – +230°C

Applications/CharacteristicsA very flexible high pressure hose due to the convulted inner tube. The hose is suitable for most hazardous environments. Large chemical resistance range, low friction and wide temperature range. Age resistant.




1095-00-04 6.2 1/4" 9.8 19.8 761095-00-06 8.9 3/8" 13.0 19.0 1271095-00-08 12.4 1/2" 16.9 14.7 140

1091-00-04 7.1 1/4" 12.3 13.8 181091-00-06 9.5 3/8" 15.5 11.2 201091-00-08 12.7 1/2" 17.7 7.8 251091-00-10 15.9 5/8" 22.1 6.8 501091-00-12 19.0 3/4" 24.6 5.2 651091-00-16 25.5 1" 30.7 3.5 90


1

1094 P.T.F.E. HOSE, CONVOLUTED TAPED

ConstructionInner tube: Smooth P.T.F.E. (Teflon®)Reinforcement: One braid of stainless steel wire, SS 2330Safety factor: 4:1Temperature: -54°C – +204°C

Applications/CharacteristicsA very flexible high pressure hose due to the convulted inner tube. The hose is suitable for most hazardous environments. Large chemical resistance range, low friction and wide temperature range. Age resistant.



1094-00-06 9.53 3/8" 15.62 6.9 25.4 1094-00-08 12.70 1/2" 19.93 8.6 38.0 1094-00-10 16.00 5/8" 23.03 9.6 50.0 1094-00-12 19.05 3/4" 26.67 7.6 63.0 1094-00-16 25.40 1" 32.25 6.9 76.0 1094-00-20 31.75 1 1/4" 39.88 6.9 88.9 1094-00-24 38.10 1 1/2" 45.97 5.2 114.0 1094-00-32 50.80 2" 58.93 3.4 133.0

Spir Star hoses used for extreme working pressures of up to 3 200 Bar

ULTRA HiGH PRESSURE THERmOPLASTiC HOSES

□ Suitable for water cutting, steel and concrete along with applications that need very high working pressure.

□ Some hoses can be delivered in lengths of up to 1,200 meters.

□ All hoses are delivered assembled with directions and safety instructions.

□ All hoses are tested and certified.

The SPIR STAR hose is designed with a reinforcement of specially processed high resistance steel wire, an inner tube of Polyoxymethylene (POM) or Polyamide (PA), and a cover of Polyamide (PA) or Polyurethane (PUR).

The smooth inner tube gives the hose excellent characteristics and a very low volumetric expansion. The hose is also extremely resistant to chemicals. >>


1201-11 SPiR STAR, TYPE 2W

ConstructionInner tube: Polyamid / Nylon 11/12Cover: PolyurethaneReinforcement: Four spirals of steel wireSafety factor: 2.5:1Temperature: -30°C – +80°CDesign: Black

Applications/CharacteristicsA hose for high pressure hydraulics and water cleaning. The hose is delivered assembled with fittings according to customer demand.

Product group: 140


1201-11-02 4.0 1/8" 9.8 140.0 65 0.161201-11-04 6.0 1/4" 11.7 128.0 95 0.231201-11-05 8.0 5/16" 13.8 100.0 110 0.291201-11-06 10.0 3/8" 16.8 100.0 125 0.431201-11-08 12.8 1/2" 20.4 100.0 150 0.59

1201-30 SPIR STAR, TYPE 4

ConstructionInner tube: Polyamid / Nylon 11/12 or POMCover: Polyamid / Nylon 11/12Reinforcement: Four spirals of steel wireSafety factor: 2.5:1Temperature: -30°C – +80°CDesign: Grey


Product group: 140


1201-30-02 4.0 1/8" 10.3 216.0 130 0.231201-30-03 5.0 3/16" 11.2 180.0 150 0.261201-30-04 6.3 1/4" 12.6 150.0 180 0.301201-30-05 8.0 5/16" 14.6 150.0 200 0.391201-30-06 9.9 3/8" 18.4 150.0 200 0.691201-30-08 12.8 1/2" 21.4 128.0 200 0.801201-30-10 16.0 5/8" 25.0 100.0 250 0.941201-30-12 19.8 3/4" 29.6 100.0 250 1.35


1

1201-40 SPIR STAR, 6

ConstructionInner tube: Polyamid / Nylon 11/12Cover: PolyurethaneReinforcement: Six spirals of steel wireSafety factor: 2.5:1Temperature: -30°C – +80°CDesign: Blue


Product group: 140


1201-40-02 4.0 1/8" 11.5 280.0 175 0.361201-40-03 5.0 3/16" 13.4 262.0 200 0.451201-40-05 8.0 5/16" 16.4 200.0 250 0.641201-40-06 9.8 3/8" 20.4 192.0 250 1.001201-40-08 12.8 1/2" 23.4 168.0 300 1.161201-40-12 18.8 3/4" 31.4 140.0 350 1.92

1201-46 SPIR STAR, TYPE 6H

ConstructionInner tube: Polyamid / Nylon 11/12 or POMCover: Polyamid / Nylon 11/12Reinforcement: Four spirals of steel wireSafety factor: 2.5:1Temperature: -30°C – +80°CDesign: Red


Product group: 140


1201-46-03 5.0 3/16" 13.8 280.0 220 0.521201-46-05 8.0 5/16" 17.8 250.0 260 0.83

HYDROSCAND SPECiAL HOSESWHERE NOTHiNG iS imPOSSiBLE

SpecialHosesSpecialHoses

At HYDROSCAND Special Hoses, we meet the increasing demands of special products. Here we produce and assembly customer adapted welded metal hoses, concrete hoses, special P.T.F.E. hoses, composite hoses, high pressure hoses for extreme pressures and other hoses where special competence is needed.

Contact your local Hydroscand depot for more information.


1:4HYDROSCAND INDUSTRIAL HOSES

PRODUCT GROUP 140In our wide selection of high quality hoses, we have hoses for all application areas. We have strived to offer low weight, great flexibility and a variety of dimensions in order to meet our customers’ needs for the right hose for the right kind of fluids. With our wide range of products, Hydroscand can offer the perfect hose to fulfil the special demands of every function.

Hydroscand will also commit to develop hoses in cooperation with the customers, to fulfil requests of other materials or special qualities.

For industrial hose couplings, see chapter 5. For hose clamps, see chapter 5:01.

Kevlar® and Teflon® are registered trademarks by DuPont.

TAbLE Of CONTENTS

Hydroscand reserves the right to modify any or all parts of this catalogue without any prior notice. The table of contents continues on the next page.

1553-90 NEW Heavy Press, forage & granulate hose 1:4a1508 NEW Sanitation and pressure hose PVC 1:4a1533 NEW Oil suction and pressure hose, PVC 1:4b1533-10 NEW Oil suction and pressure hose, PVC 1:4b1401 Hydrowater, Industrial Water Hose 351456-50 Multiwater, Flush Hose 20 Bar 351456-30 Hyrdoheat, Heating Hose 361501 Water Hose PVC 361401-10 Pulpflush, Groove Flush Hose 371401-60 Pumpflush Heavy Duty, Feeder Hose 15 Bar 371402-30 Warecooler, Industrial Cooling Hose 381403 Pumpflush SW, Down Pipe Hose, 10 Bar 381404 Pumpflush HW, Spiral Suction Hose, 10 Bar 391405 PVC Drainage Hose, Lay Flat 391407-10 Spiral Suction Hose, Super Elastic PVC 401507-10 Spiral Suction Hose, Extremely Elastic PVC 401409-40 Radiator LL, Cooling Hose 3 Bar 411409-50 Radiator Flex, Corrugated Cooling Hose 411410 Carheater, Car Heating Hose 421415-20 Aquasewer, Flushing Hose 250 421418 Aquasewer, Flushing Hose Thermoplast, 200 431419 Aquasewer, Flushing Hose Thermoplast, 250 431422 Air Pressure Hose, PVC 471424-30 Universal PU Hose, 20 Bar 491424-80 Air Pressure Hose, Soft 491425 Mantex, Air Pressure Hose, Lay-Flat 501424-00-1690 Flatair, Air Pressure Hose, Lay-Flat, 20 Bar 501425-10 Armtex, Fire Hose 511425-30 Getex, Fire Hose 521429 PVC Hose, Transparent 531432-50 Multioil, Oil Pressure Hose, 20 Bar 541433 Oil Suction Hose, PVC 561436 Cooloil, Oil Cooling Hose 601456 Yellow Python, 15 Bar 701552 Low-Weight Spiral Suction Hose 711552-10 Low-Weight Spiral Suction Hose, Antistatic 721452 Foodclean, Food Flush Hose 721452-10 Foodsteam, Food Flush Hose, Steam 731553 Dairymaster, Milk Hose, 6 Bar 731553-10 Multifood, Food Hose, 10 Bar 741553-50 Material Hose, PVC 741454 Ontario, Steam Hose, 17 Bar 751454-10 Amazonas, Steam Hose 751454-30 Niagara, Steam Hose, DIN 2825, 18 Bar 761458-10 Water Hose, 10 Bar 771404-30 Sharkhose, Fish Pump Hose 771461-10 Food Hose, Transparent 841484 Metal Hose, Parallel Wrapped 961485 Metal Hose, Tight And Parallel Wrapped 961489 Metal Hose, Parallel Wrapped, Mechanically 971481 Miniwave, Metal Hose, Parallel Wrapped 971494 Metal Hose, Spiral Wrapped 98

WATER PAGE

STEAm PAGE

1452-10 Foodsteam, Food Flush Hose, Steam 731454 Ontario, Steam Hose, 17 Bar 751454-10 Amazonas, Steam Hose 751454-30 Niagara, Steam Hose, DIN 2825, 18 Bar 761484 Metal Hose, Parallel Wrapped 961485 Metal Hose, Tight And Parallel Wrapped 961489 Metal Hose, Parallel Wrapped, Mechanically 971481 Miniwave, Metal Hose, Parallel Wrapped 971494 Metal Hose, Spiral Wrapped 98

1420 Hydroair, Air Pressure Hose, 15 Bar 441420-10 Falcon, Air Pressure Hose, 15 Bar 441421 Multiair, Air Pressure Hose, 20 Bar 451521 Aircomp, Compressor Hose, 180°C 451521-50 Aircomp Soft, Compressor Hose, 180°C 461421-32 Hydrobreathe, Respiration Hose 461422 Air Pressure Hose, PVC 471424 Air Pressure Hose, PVC, 20 Bar 471424-10 Air Pressure Hose, PVC, 40 Bar 481424-20 Air Pressure Hose, PVC, 15 Bar 481424-30 Universal PU Hose, 20 Bar 491424-80 Air Pressure Hose, Soft 491425 Mantex, Air Pressure Hose, Lay-Flat 501424-00-1690 Flatair, Air Pressure Hose, Lay-Flat, 20 Bar 501425-70 Mantex HP, Air Pressure Hose, Lay-Flat 511426 Airbrake SAE J1402-A, Brake Hose 521426-10 Airbrake DIN 74310, Brake Hose 531429 PVC Hose, Transparent 531432-50 Multioil, Oil Pressure Hose, 20 Bar 541456 Yellow Python, 15 Bar 701484 Metal Hose, Parallel Wrapped 961485 Metal Hose, Tight And Parallel Wrapped 961489 Metal Hose, Parallel Wrapped, Mechanically 971481 Miniwave, Metal Hose, Parallel Wrapped 971494 Metal Hose, Spiral Wrapped 98

AIR PRESSURE PAGE

SPECIAL PAGE

1432-10 Autooil, Fuel Hose 551432-30 Yachtoil SW, Marine Fuel Hose, Iso 7840 551580 Comp LD 621581 Comp Oil 800 621582 Comp Chem 700 631583 Comp Temp 305 631584 Comp P.T.F.E 300 641585 Comp Chem LD Gas Return 641458 Caspian, Boat Sanitary Hose 761480 Gas Exhaust Hose, Stainless Steel 951484 Metal Hose, Parallel Wrapped 961485 Metal Hose, Tight And Parallel Wrapped 961489 Metal Hose, Parallel Wrapped, Mechanically 971481 Miniwave, Metal Hose, Parallel Wrapped 971494 Metal Hose, Spiral Wrapped 98


TAbLE Of CONTENTS

fOOD & bEvERAGE PAGE

1553-90 NEW Heavy Press, forage & granulate hose 1:4a 1521 Aircomp, Compressor Hose, 180°C 451521-50 Aircomp, Compressor Hose, 180°C 461422 Air Pressure Hose, PVC 471424-30 Universal PU Hose, 20 Bar 491448 Rainbow, Carbon Dioxide Hose 681450-30 Viper, Chemical Hose, UPE / Gas Truck 701552 Low-Weight Spiral Suction Hose 711552-10 Low-Weight Spiral Suction Hose, Antistatic 721452 Foodclean, Food Flush Hose 721452-10 Foodsteam, Food Flush Hose, Steam 731553 Dairymaster, Milk Hose, 6 Bar 731553-10 Multifood, Food Hose, 10 Bar 741553-50 Material Hose, PVC 741458-10 Water Hose, 10 Bar 771404-30 Sharkhose, Fish Pump Hose 771461-10 Food Hose, Transparent 841461-40 Suction And Pressure Hose, PU/PVC 851463-10 Vacuum Hose, Polyurethane 861463-40 Vacuum Hose, Polyurethane, Antistatic 871563-30 Polyurethane Hose M 0.7 881563-50 Polyurethane Hose H 1.4 881563-70 Polyurethane Hose HD T 2.0 89

mATERIALS PAGE

1553-90 NEW Heavy Press, forage & granulate hose 1:4a 1508 NEW Sanitation and pressure hose PVC 1:4a1533 NEW Oil suction and pressure hose, PVC 1:4b1533-10 NEW Oil suction and pressure hose, PVC 1:4b1401-10 Pulpflush, Groove Flush Hose 371507-10 Spiral Suction Hose, Extremely Elastic PVC 401552-10 Low-Weight Spiral Suction Hose, Antistatic 721553-50 Material Hose, PVC 741461 Ventilation And Material Suction Hose, PVC 831461-30 Material Suction Hose, Self-Extinguishing 831560 Dust Suction Hose SD 841461-10 Food Hose, Transparent 841461-40 Suction And Pressure Hose, PU/PVC 851462 Industrial Dust Suction Hose, PE 851462-10 Industrial Dust Suction Hose, PE, Antistatic 861463-10 Vacuum Hose, Polyurethane 861463-40 Vacuum Hose, Polyurethane, Antistatic 871563-20 Polyurethane Hose L 0.4 871563-30 Polyurethane Hose M 0.7 881563-50 Polyurethane Hose H 1.4 881563-70 Polyurethane Hose HD T 2.0 891464 Sandstone, Blasting Hose, 10 Bar 891464 Sandstone, Blasting Hose, 10 Bar 891464-10 Marble, Concrete Cast Hose, 40 Bar 901464-50 Shale, Concrete Pump Hose, 80 Bar 901465-30 Limestone, Concrete & Granulate Hose 911565 Chloriet, Material Hose, Lay-Flat 911466 Dolmite, Industrial Dust Suction Hose 921467-45 Slate, Sanitation Suction Hose, M45 921467-51 Coal, Sanitation Suction Hose, M51 931467-52 Granulite, Transportation Hose M52 931567 Gneiss, Sanitation Suction Hose 941468 Material Hose PVC/PU 941480 Gas Exhaust Hose, Stainless Steel 95

GAS & WELDING PAGE

1440 Weldarc, Welding Hose EN 559, 20 Bar 651441 Twinarc, Twin Welding Hose EN 559, 20 Bar 651442 Heatseaker, Liquified Petroleum Gas Hose 661442-10 Liquified Petroleum Gas Hose, R1AT 661443 Twin Hose, Liquified Petroleum Gas 671445-10 Coldseeker, AC Hose 671447 Non-Freezing Media Hose 9038 681448 Rainbow, Carbon Dioxide Hose 681484 Metal Hose, Parallel Wrapped 961485 Metal Hose, Tight And Parallel Wrapped 961489 Metal Hose, Parallel Wrapped, Mechanically 971481 Miniwave, Metal Hose, Parallel Wrapped 971494 Metal Hose, Spiral Wrapped 98

OIL & GASOLINE PAGE

1533 NEW Oil suction and pressure hose, PVC 1:4b1533-10 NEW Oil suction and pressure hose, PVC 1:4b1424-80 Air Pressure Hose, Soft 491425-10 Armtex, Fire Hose 511430 Hydroil, Oil Pressure Hose, 10 Bar 541432-50 Multioil, Oil Pressure Hose, 20 Bar 541432-10 Autooil, Fuel Hose 551432-30 Yachtoil SW, Marine Fuel Hose, Iso 7840 551432-31 Yachtoil SW, Marine Fuel Hose, Iso 7840 561433 Oil Suction Hose, PVC 561434 Exmarin, Exhaust Gas / Marine Refill Hose 571434-10 Exlight, Low Weight Exhaust Gas Hose 571435 Tankoil SW, Gas Truck Hose, 10/20 Bar 581439 Tankoil HW, Truck Hose With Spiral, 10 Bar 581469-20 Gas Truck Hose EN 12115, 16 Bar 591550 Asphalt, Tar And Mineral Suction Hose 591436 Cooloil, Oil Cooling Hose 601436-50 Mathilda P.T.F.E. ISO 7840A1 601437 Ragoil, Fuel Hose 611438 R-Four, Return & Suction Hose, SAE 100 R4 611580 Comp LD 621581 Comp Oil 800 621583 Comp Temp 305 631584 Comp P.T.F.E 300 641461-40 Suction And Pressure Hose, PU/PVC 851484 Metal Hose, Parallel Wrapped 961485 Metal Hose, Tight And Parallel Wrapped 961489 Metal Hose, Parallel Wrapped, Mechanically 971481 Miniwave, Metal Hose, Parallel Wrapped 971494 Metal Hose, Spiral Wrapped 98

CHEmICALS PAGE

1582 Comp Chem 700 631583 Comp Temp 305 631584 Comp P.T.F.E 300 641450 Bushmaster, Chemical Hose, XLPE, 10 Bar 691450-10 Cobra, Chemical Hose, EPDM 691450-30 Viper, Chemical Hose, UPE / Gas Truck 701456 Yellow Python, 15 Bar 701451-40 Spray Paint Hose, 20 Bar 711454 Ontario, Steam Hose, 17 Bar 751454-10 Amazonas, Steam Hose 751454-30 Niagara, Steam Hose, DIN 2825, 18 Bar 761484 Metal Hose, Parallel Wrapped 961485 Metal Hose, Tight And Parallel Wrapped 961489 Metal Hose, Parallel Wrapped, Mechanically 971481 Miniwave, Metal Hose, Parallel Wrapped 971494 Metal Hose, Spiral Wrapped 98

vENTILATION PAGE

1434-10 Exlight, Low Weight Exhaust Gas Hose 571552 Low-Weight Spiral Suction Hose 711552-10 Low-Weight Spiral Suction Hose, Antistatic 721460 Ventilation Hose, PVC 781460-40 Dry-Up Hose For Construction Sites 781460-45 Dry-Up Hose For Construction Sites 791560-10 Defrost Hose, APK 791460-50 Ventilation Hose, ALU 801460-20 Ventilation And Kitchen Fan Hose 801561 Exhaust Hose For Hot Air, Neopren 811561-10 Exhaust Hose For Hot Air, Neopren, Double 811562 Exhaust Hose For Hot Air, Silicone 821562-10 Exhaust Hose For Hot Air, Silicone, Double 821461 Ventilation And Material Suction Hose, Pvc 831461-30 Material Suction Hose, Self-Extinguishing 831560 Dust Suction Hose SD 841462 Industrial Dust Suction Hose, PE 851462-10 Industrial Dust Suction Hose, PE, Antistatic 861463-10 Vacuum Hose, Polyurethane 861463-40 Vacuum Hose, Polyurethane, Antistatic 871563-20 Polyurethane Hose L 0.4 871563-30 Polyurethane Hose M 0.7 881480 Gas Exhaust Hose, Stainless Steel 95

1:4 aNEWS PRODUCT CATALOGUE 2009

1:4NEW 1553-90 HEAVY PRESS, FORAGE & GRANULATE HOSE

ConstructionInner tube: PU/PVC whiteCover: PU/PVCReinforcement: Synthetic textileSafety factor: 3:1Temperature: -25°C – +60°CDesign: Smooth, white

Applications/CharacteristicsDuralbe, food approved, pressure hose for transportation of powder granualtes, cement and forage. Also suitable for water.

Product group: 141

Part ID OD Work pr. Bend rad. Weight Length number mm mm MPa mm kg/m m/coil

1553-90-32 51.0 66.0 1.0 1.65 201553-90-39 60.0 76.0 1.0 1.75 201553-90-48 76.0 94.0 1.0 2.75 201553-90-64 102.0 120 0.7 3.40 20

NEW 1508 SANITATION SUCTION AND PRESSURE HOSE, PVC

ConstructionInner tube: PVC/NBRCover: PVC/NBRReinforcement: Embedded spiralSafety factor: 3:1Temperature: -40°C – +60°CDesign: Lightly corrugated, silver grey, internally smooth

Applications/CharacteristicsSuper elastic and flexible suction and pressure hose for low temperatures. The low weight makes it suitable for sludge suction, draining of sump and for transportation of foods and fertilizers.

Product group: 141

Part ID OD Work pr. Bend rad. Weight Vaccum pr. Length number mm mm MPa mm kg/m Max % m/coil

1508-00-32 51.0 61.0 0.50 170 1.05 90 501508-00-48 76.0 88.0 0.40 240 1.75 90 501508-00-64 102.0 115.0 0.30 320 2.70 90 501508-00-80 127.0 142.0 0.20 620 3.60 90 50

1:4 b NEWS PRODUCT CATALOGUE 2009

NEW 1533-10 OIL SUCTION AND PRESSURE HOSE, PVC ANTISTATIC

NEW 1533 OIL SUCTION AND PRESSURE HOSE, PVC

ConstructionInner tube: PVC/NBRCover: PVC/NBRReinforcement: Embedded spiralSafety factor: 3:1Temperature: -25°C – +60°CDesign: Lightly corrugated, blue with longitudal antistatic braid, internally smooth

Applications/CharacteristicsA super elastic oil resistant suction and pressure hose for paraffins, grease oils, mineral based hydraulic oils, diesel, sludge and water etc. The hose has a longitudal antistatic copper braid. Low weight and very flexible.

Product group: 141

ConstructionInner tube: PVC/NBRCover: PVC/NBRReinforcement: Embedded spiralSafety factor: 3:1Temperature: -25°C – +60°CDesign: Lightly corrugated, blue, internally smooth

Applications/CharacteristicsA super elastic oil resistant suction and pressure hose for paraffins, grease oils, mineral based hydraulic oils, diesel, sludge and water etc. Low weight and very flexible.

Product group: 141



1533-10-12 19.0 26.0 0.60 90 0.45 90 501533-10-16 25.0 34.0 0.80 100 0.60 90 301533-10-20 32.0 41.0 0.70 150 0.70 90 301533-10-32 51.0 61.0 0.70 200 1.20 90 501533-10-40 63.0 75.0 0.60 230 1.65 90 501533-10-48 76.0 88.0 0.50 250 2.00 90 50

1533-00-12 19.0 26.0 0.80 100 0.50 90 501533-00-16 25.0 34.0 0.80 100 0.60 90 501533-00-20 32.0 41.0 0.70 150 0.70 90 501533-00-24 38.0 48.0 0.70 180 0.80 90 501533-00-32 51.0 61.0 0.70 200 1.20 90 501533-00-40 63.0 75.0 0.60 230 1.65 90 501533-00-48 76.0 88.0 0.60 250 2.00 90 501533-00-64 102.0 116.0 0.40 350 3.30 90 50


1:41401 HYDROWATER, INDUSTRIAL WATER HOSE 10/12 bAR

1456-50 mULTIWATER, fLUSH HOSE 20 bAR

ConstructionInner tube: Synthetic rubber (SBR)Cover: Weather and abrasion resistant rubber (SBR/EPDM)Reinforcement: Synthetic textileSafety factor: 3:1Temperature: -30°C – +80°CDesign: Smooth, red. Wrapped from 32 mm.

Applications/CharacteristicsA flush hose for industries, construction sites, sports parks and wash halls. Easy to handle, low weight, durable and weather resistant.

Product group: 140

ConstructionInner tube: Black smooth (EPDM)Cover: EPDMReinforcement: Synthetic textileSafety factor: 3:1Temperature: -40°C – +120°CDesign: Smooth black with red longitudinal stripes

Applications/CharacteristicsA flush and cleaning hose for cold and warm water for industry and agriculture. An exceptional flexibility combined with good temperature characteristics.

Product group: 140



1401-00-08 13.0 19.0 1.2 80 0.24 501401-00-10 16.0 23.0 1.2 100 0.34 501401-00-12 19.0 26.0 1.2 110 0.40 501401-00-16 25.0 33.0 1.2 150 0.58 501401-00-20 32.0 42.0 1.0 192 0.89 401401-00-24 38.0 48.0 1.0 228 1.02 401401-00-25 45.0 55.0 1.0 271 1.20 401401-00-32 50.0 60.0 1.0 300 1.31 401401-00-40 63.0 73.0 1.0 381 1.63 401401-00-48 75.0 86.0 1.0 450 2.20 401401-00-64 102.0 114.0 1.0 800 3.69 401401-00-96 152.0 162.0 1.0 1220 4.80 40

1456-50-08 13.0 19.0 2.0 75 0.21 401456-50-12 19.0 27.0 2.0 110 0.40 401456-50-16 25.0 34.0 2.0 150 0.57 40


1456-30 HYRDOHEAT, HEATING HOSE fOR CONSTRUCTION SITES

1501 WATER HOSE PvC

ConstructionInner tube: EPDMCover: EPDMReinforcement: Synthetic textileSafety factor: 3:1Temperature: -40°C – +100°CDesign: Smooth, grey (except 1" which is black)

Applications/CharacteristicsA wear resistant hose for transportation of hot water, especially in the construction in-dustry. Regularly used as heating hose at construction sites.

Product group: 140

ConstructionInner tube: PVCCover: PVCReinforcement: Knitted textileSafety factor: 2.5:1Temperature: -5°C – +60°CDesign: Smooth, yellow

Applications/CharacteristicsA very resistant and soft knitted textile hose. The inner tube is made of a first class, food approved PVC material. Used in construction and shipbuilding industries, as well as for irrigation.

Product group: 140



1456-30-16 25.0 35.0 1.0 150 0.63 601456-30-20 32.0 43.0 0.5 350 0.91 601456-30-24 38.0 50.0 0.5 400 1.13 601456-30-32 51.0 63.0 0.5 500 1.46 60

1501-25-08 13.0 18.0 1.0 0.14 251501-50-08 13.0 18.0 1.0 0.14 501501-25-12 19.0 25.0 1.0 0.25 251501-50-12 19.0 25.0 1.0 0.25 501501-25-16 25.0 32.0 0.8 0.36 251501-50-16 25.0 32.0 0.8 0.36 50


1:41401-10 PULPfLUSH, GROOvE fLUSH HOSE

1401-60 PUmPfLUSH HEAvY DUTY, fEEDER HOSE 15 bAR

ConstructionInner tube: SBRCover: SBR/EPDMReinforcement: Textile, spiral lacingSafety factor: 3:1Temperature: -40°C – +80°CDesign: Corrugated with flush tube, red

Applications/CharacteristicsThe hose is used in the paper industry for slushing paper barrels. The external corruga-tion of the hose prevents dust formations on the floor.

Product group: 140

ConstructionInner tube: SBRCover: Abrasion and weather resistent EPDMReinforcement: Two layers of synthetic textileSafety factor: 3:1Temperature: -40°C – +75°CDesign: Wrapped, black

Applications/CharacteristicsEspecially designed as a pressure hose for drainage pumps and irrigation systems. Also very suitable for industry and mining. Resists pressure peaks and a very large external abrasion. Can be laid flat for transportation and storage.

Product group: 140



1401-10-12 20.0 31.0 1.0 120 0.70 201401-10-16 25.0 36.0 1.0 150 0.81 10,15,201401-10-20 32.0 43.0 1.0 190 0.95 15,201401-10-24 40.0 51.0 1.0 240 1.15 20

1401-60-64 102.0 112.0 1.5 1.92 401401-60-80 127.0 137.0 1.5 2.37 401401-60-96 152.0 164.0 1.5 3.35 40


1402-30 WARECOOLER, INDUSTRIAL COOLING HOSE

1403 PUmPfLUSH SW, DOWN PIPE HOSE, 10 bAR, LAY fLAT

ConstructionInner tube: EPDMCover: EPDM rubber with a ceramic fibre cordReinforcement: Synthetic textileSafety factor: 3:1Temperature: -40°C – +120°CDesign: White

Applications/CharacteristicsUsed as a protection and cooling hose where the working temperature is high, e.g. melt-ing furnaces and foundries. The cover cord is made of ceramic fibres, which gives the hose a good resistance towards flames. Sustains 1,100° C temporary radiation as well as glowing steel spatter. Electrical resistance: 106 Ohm/m.

Product group: 141

ConstructionInner tube: Synthetic rubber (SBR)Cover: Weather resistant synthetic rubber (SBR)Reinforcement: Synthetic textileSafety factor: 3:1Temperature: -30°C – +80°CDesign: Wrapped, black

Applications/CharacteristicsThe hose is used as a down pipe for irrigation, gardening and sport parks. Can be laid flat for simple storage and transportation.

Product group: 141



1402-30-08 13.0 23.0 1.0 120 0.45 401402-30-10 16.0 26.0 1.0 150 0.48 401402-30-12 19.0 30.0 1.0 200 0.58 401402-30-16 25.0 38.0 1.0 250 0.77 401402-30-20 32.0 45.0 1.0 320 0.91 401402-30-24 38.0 58.0 1.0 380 1.30 401402-30-32 51.0 65.0 1.0 500 1.89 401402-30-40 63.5 80.0 1.0 650 2.47 401402-30-48 76.0 95.0 1.0 800 3.44 401402-30-64 102.0 124.0 1.0 1,000 5.12 40

1403-00-16 25.0 31.0 1.0 0.38 401403-00-20 32.0 38.0 1.0 0.47 401403-00-24 38.0 45.0 1.0 0.65 401403-00-32 50.0 57.0 1.0 0.83 401403-00-40 63.5 70.5 1.0 1.04 401403-00-48 75.0 82.0 1.0 1.20 201403-00-64 100.0 108.0 1.0 1.78 20


1:41404 PUmPfLUSH HW, SPIRAL SUCTION HOSE, 10 bAR

1405 PvC DRAINAGE HOSE, LAY fLAT

ConstructionInner tube: Synthetic rubber (SBR)Cover: Weather resistant synthetic rubber (SBR)Reinforcement: Synthetic textile with a spiral of steelSafety factor: 3:1Temperature: -30°C – +80°CDesign: Wrapped, black

Applications/CharacteristicsSuction hose for pumps, sewage, well-cleaning and tank tipping. Can be used on both the pressure side as well as the suction side of the pump.

Product group: 141

ConstructionInner tube: PVCCover: PVCReinforcement: Synthetic textileSafety factor: 3:1Temperature: -20°C – +60°CDesign: Smooth, blue

Applications/CharacteristicsA wear resistant and durable drainage hose for pump applications. Can also be used as hose protection. Can be laid flat for transportation and storage. Other dimensions and pressure classes are available upon request. The working pressures mentioned below are valid at +20°C.

Product group: 141



1404-00-20 32 42.0 1.0 190 1.01 80 401404-00-24 38 48.0 1.0 230 1.16 80 401404-00-32 50 60.0 1.0 300 1.50 80 401404-00-48 75 86.5 1.0 450 2.75 80 201404-00-64 100 114.0 1.0 600 3.98 80 20

1405-00-12 19.0 21.6 0.7 0.11 1001405-00-16 26.0 29.0 0.7 0.17 1001405-00-20 33.0 35.9 0.7 0.20 1001405-00-24 40.0 42.6 0.5 0.21 1001405-00-32 52.0 54.7 0.5 0.27 1001405-00-40 65.0 68.0 0.4 0.38 1001405-00-48 77.0 80.4 0.4 0.53 1001405-00-64 103.0 106.5 0.3 0.70 1001405-00-80 128.0 132.0 0.3 0.94 1001405-00-96 153.0 157.0 0.3 1.18 1001405-02-04 207.0 212.0 0.2 2.90 501405-02-50 257.0 262.2 0.2 2.65 50


1407-10 SPIRAL SUCTION HOSE, SUPER ELASTIC PvC

1507-10 SPIRAL SUCTION HOSE, EXTREmELY ELASTIC PvC

ConstructionInner tube: PVCCover: PVCReinforcement: PVC spiralSafety factor: 3:1Temperature: -25°C – +55°CDesign: Corrugated, green-grey

Applications/CharacteristicsA suction hose for sewage trucks, grains and fertilizing. Pliable and flexible at low tem-peratures. The extra hard PVC spiral gives an extraordinary protection against external abrasion.

Product group: 141

ConstructionInner tube: PVCCover: PVCReinforcement: PVC spiralSafety factor: 3:1Temperature: -40°C – +55°CDesign: Corrugated, dark green-grey

Applications/CharacteristicsA suction hose for sewage truck, grains and fertilizing. Extremely pliable and flexible at low temperatures. The extra hard PVC spiral gives an extraordinary protection against external abrasion and friction.

Product group: 141

Part ID OD WP Bend rad. Weight Vaccum pr. Length number mm mm MPa mm kg/m max % m/coil

Part ID OD WP Bend rad. Weight Vaccum pr. Length number mm mm MPa mm kg/m max % m/coil

1407-10-16 25 33.8 0.7 100 0.50 90 501407-10-20 32 40.8 0.6 130 0.60 90 501407-10-24 38 46.8 0.6 150 0.70 90 50

1507-10-32 50 61.0 0.35 175 1.05 80 30 & 501507-10-40 63 74.0 0.30 210 1.39 80 501507-10-48 76 89.0 0.30 260 1.70 80 501507-10-64 102 116.6 0.20 300 2.70 80 301507-10-80 127 143.6 0.20 445 3.90 80 201507-10-96 152 170.0 0.15 525 5.00 70 20


1:41409-40 RADIATOR LL, COOLING HOSE 3 bAR

1409-50 RADIATOR fLEX, CORRUGATED COOLING HOSE

ConstructionInner tube: EPDMCover: EPDMReinforcement: Synthetic textileSafety factor: 3:1Temperature: -40°C – +95°C, temporarily +120°CDesign: Wrapped, black

Applications/CharacteristicsA hose suitable for cooling systems, hot water, glycol etc. Also for some chemicals.Product group: 141

ConstructionInner tube: Heat resistant EPDM rubberCover: Abrasion, heat and partly oil resistant rubber (CR)Reinforcement: Synthetic textile with one steel spiralSafety factor: 3:1Temperature: -40°C – +120°CDesign: Corrugtated, black

Applications/CharacteristicsThe hose is used as a cooling hose in vehicles where there is a requirement for high flexibility. Its special corrugation allows hard bends without folding. Also used as a hot water hose in the industry.

Product group: 141



1409-50-10 16.0 24.0 0.5 80 0.30 401409-50-12 20.0 28.0 0.5 100 0.38 401409-50-14 22.0 30.0 0.5 115 0.42 401409-50-16 25.0 33.0 0.5 125 0.46 401409-50-18 28.0 35.0 0.5 140 0.50 401409-50-20 32.0 40.0 0.5 160 0.73 401409-50-22 35.0 43.0 0.5 175 0.79 401409-50-24 38.0 46.0 0.5 190 0.84 401409-50-30 45.0 54.0 0.5 225 0.98 401409-50-32 50.0 59.0 0.5 250 1.08 401409-50-38 55.0 65.0 0.5 275 1.18 401409-50-44 70.0 80.0 0.5 350 1.47 40

1409-40-12 20.0 26.5 0.3 240 0.32 801409-40-14 22.0 28.5 0.3 260 0.34 801409-40-16 25.0 32.0 0.3 300 0.39 401409-40-18 28.0 36.0 0.3 340 0.50 401409-40-20 32.0 40.0 0.3 380 0.55 401409-40-22 35.0 43.0 0.3 420 0.60 401409-40-24 38.0 47.0 0.3 460 0.73 401409-40-30 45.0 54.0 0.3 540 0.85 401409-40-31 48.0 57.0 0.3 580 0.91 401409-40-32 50.0 60.0 0.3 600 1.07 401409-40-38 55.0 65.0 0.3 660 1.17 401409-40-39 60.0 70.0 0.3 720 1.26 401409-40-40 65.0 76.0 0.3 720 1.54 201409-40-44 70.0 81.0 0.3 770 1.65 201409-40-48 75.0 86.0 0.3 830 1.75 201409-40-51 80.0 92.0 0.3 880 2.05 201409-40-56 90.0 102.0 0.3 990 2.29 201409-40-64 100.0 113.0 0.3 1120 2.63 20


1410 CARHEATER, CAR HEATING HOSE

1415-20 AQUASEWER, fLUSHING HOSE 250 bAR

ConstructionInner tube: Heat resistant EPDM rubberCover: Abrasion and weather resistant rubber (EPDM)Reinforcement: Synthetic textileSafety factor: 3:1Temperature: -40°C – +100°C, temporarily +120°CDesign: Smooth, black

Applications/CharacteristicsSuitable hose for cooling and heating systems on vehicles, including where pressure and heat is required. The hose is resistant to glycol and light chemicals.

Product group: 141

ConstructionInner tube: Synthetic rubber (SBR)Cover: Abrasion and weather resistant rubber (SBR/NR)Reinforcement: Two layers of textileSafety factor: 3:1Temperature: -35°C – +80°CDesign: Smooth, black

Applications/CharacteristicsA hose for high pressure flushing of sewers and sewage systems. Its abrasion proof cover and textile reinforcement make it flexible and very easy to handle. Pre-assembled with an internal and external thread (BSP).

Product group: 141



1410-00-06 10.0 16.0 1.0 60 0.16 1001410-00-08 13.0 19.0 1.0 80 0.20 1001410-00-10 16.0 23.0 1.0 100 0.29 1001410-00-12 19.0 27.0 1.0 115 0.39 80

1415-20-08 13.0 25.6 25.0 70 0.45 40-60-80-1201415-20-12 19.0 31.6 25.0 90 0.62 40-80-1201415-20-16 25.0 39.3 25.0 100 0.88 40-80-120-160-1801415-20-20 32.0 47.6 25.0 130 1.14 40-80-120-160-1801415-20-24 38.0 54.0 25.0 155 1.35 120


1:41418 AQUASEWER, fLUSHING HOSE THERmOPLAST, 200 bAR

1419 AQUASEWER, fLUSHING HOSE THERmOPLAST, 250 bAR

ConstructionInner tube: Polyurethane (PU)Cover: Polyurethane (PU)Reinforcement: Two braids of nylonSafety factor: 2.61:1Temperature: -40°C – +60°CDesign: Smooth, yellow

Applications/CharacteristicsA hose suitable for high pressure sewage systems. The hose has low weight compared to rubber hoses, which leads to less abrasion and increased flowing speed. The hose sustains 3–4 times more external abrasion compared to a traditional rubber hose. It is delivered pre-assembled with fittings according to demand.

Product group: 141

ConstructionInner tube: Polyethylene (PE)Cover: Polyurethane (PU)Reinforcement: Two braids of nylonSafety factor: 2.61:1Temperature: -40°C – +60°CDesign: Smooth, blue

Applications/CharacteristicsA hose suitable for high pressure sweage systems. The hose has low weight compared to rubber hoses, which leads to less abrasion and increased flowing speed. The hose sustains 3–4 times more external abrasion compared to a traditional rubber hose. It is delivered pre-assembled with fittings according to demand.

Product group: 141

Part ID OD Work pr. Bend rad. Weight Burst pr. Length number mm mm MPa mm kg/m MPa m/coil

Part ID OD Work pr. Bend rad. Weight Burst pr. Length number mm mm MPa mm kg/m MPa m/coil

1418-06-12 20.0 31.5 20.0 120 0.49 52.0 601418-08-12 20.0 31.5 20.0 120 0.49 52.0 801418-12-12 20.0 31.5 20.0 120 0.49 52.0 1201418-06-16 25.0 38.7 20.0 155 0.61 52.0 601418-08-16 25.0 38.7 20.0 155 0.61 52.0 801418-12-16 25.0 38.7 20.0 155 0.61 52.0 120

1419-06-08 13.0 22.8 25.0 75 0.29 62.5 601419-08-08 13.0 22.8 25.0 75 0.29 62.5 801419-12-08 13.0 22.8 25.0 75 0.29 62.5 1201419-06-12 19.6 30.3 25.0 120 0.29 62.5 601419-08-12 19.6 30.3 25.0 120 0.49 62.5 801419-12-12 19.6 30.3 25.0 120 0.29 62.5 1201419-06-16 25.9 37.9 25.0 155 0.62 62.5 601419-08-16 25.9 37.9 25.0 155 0.62 62.5 801419-12-16 25.9 37.9 25.0 155 0.62 62.5 120


1420 HYDROAIR, AIR PRESSURE HOSE, 15 bAR

1420-10 fALCON, AIR PRESSURE HOSE, 15 bAR

ConstructionInner tube: Synthetic rubber (SBR)Cover: Abrasion resistant synthetic rubber (SBR)Reinforcement: Synthetic textileSafety factor: 3:1Temperature: -30°C – +70°CDesign: Smooth, black. Wrapped from 32 mm

Applications/CharacteristicsThis air pressure hose is suitable for most applications, tools, air pressure units and rock drills etc. Used in engineering, mining and construction industries. Sustains oil mist.

Product group: 142

ConstructionInner tube: Synthetic rubber (SBR)Cover: SBR/EPDM rubberReinforcement: Synthetic textileSafety factor: 3:1Temperature: -20°C – +80°CDesign: Yellow. Wrapped from 32 mm

Applications/CharacteristicsAir pressure hose for most applications, tools, air pressure units and rock drills etc. Used in engineering, mining and construction industries. Sustains oil mist.

Product group: 142



1420-00-04 6.0 12.0 1.5 50 0.13 401420-00-05 8.0 15.0 1.5 65 0.19 1001420-00-06 10.0 17.0 1.5 80 0.22 401420-00-08 13.0 21.0 1.5 105 0.32 401420-00-10 16.0 26.0 1.5 130 0.49 401420-00-12 19.0 29.0 1.5 150 0.57 401420-00-16 25.0 36.0 1.5 200 0.79 401420-00-20 32.0 44.0 1.5 320 0.94 401420-00-24 38.0 52.0 1.5 380 1.42 401420-00-32 50.0 65.0 1.5 500 1.98 401420-00-40 63.5 78.5 1.5 650 2.42 401420-00-48 75.0 90.0 1.5 750 2.80 401420-00-64 100.0 115.0 1.5 1000 3.55 40

1420-10-04 6.0 12.0 1.5 50 0.13 40/601420-10-06 10.0 17.0 1.5 80 0.22 40/601420-10-08 13.0 21.0 1.5 105 0.32 40/601420-10-12 19.0 27.0 1.5 150 0.43 40/601420-10-16 25.0 35.0 1.5 200 0.71 40/60


1:41421 mULTIAIR, AIR PRESSURE HOSE, 20 bAR

1521 AIRCOmP, COmPRESSOR HOSE, 180°C

ConstructionInner tube: Synthetic rubber (SRB)Cover: Abrasion resistant synthetic rubber (SBR/EPDM)Reinforcement: Synthetic textileSafety factor: 3:1Temperature: -30°C – +80°CDesign: Smooth, black

Applications/CharacteristicsAir pressure hose for applications where there is a high demand for abrasion resistance and high working pressures. Suitable in engineering, mining and construction industries. Sustains oil mist.

Product group: 142

ConstructionInner tube: White, food classedCover: EPDMReinforcement: Synthetic textile with one steel spiralSafety factor: 4:1Temperature: -40°C – +180°CDesign: Wrapped, blue

Applications/CharacteristicsA hose for air connections from compressors on trucks for bulk transportation of pow-der products. The hose is highly pliable and sustains high temperatures. The cover is weather and ozone resistant.

Product group: 142



1421-00-04 6.0 14.0 2.0 50 0.19 1001421-00-05 8.0 17.0 2.0 65 0.23 1001421-00-06 10.0 19.0 2.0 80 0.31 1001421-00-08 13.0 23.0 2.0 105 0.43 1001421-00-10 16.0 26.0 2.0 130 0.50 801421-00-12 19.0 30.0 2.0 150 0.64 801421-00-16 25.0 37.0 2.0 200 0.88 50

1521-10-32 51.0 63.0 1.0 175 1.70 401521-10-48 76.0 90.0 1.0 270 2.74 401521-10-64 102.0 116.0 1.0 400 4.12 40


1421-32 HYDRObREATHE, RESPIRATION HOSE EN 14593, EN 14594

ConstructionInner tube: HytrelCover: NBR/PVCReinforcement: Synthetic textileSafety factor: 4:1Temperature: -20°C – +60°CDesign: Smooth, blue

Applications/CharacteristicsA flexible hose for air supply in fresh air machines during sand blasting, painting and welding. Light, and does not crease. Anti-static < 106 Ohm/m. Certified according to EN 14593 and EN 14594 (replacing certification EN139). Not for underwater-use.

Product group: 142

Part ID OD Work pr. Burst pr. Bend rad. Weight Length number mm mm MPa MPa mm kg/m m/coil

1421-32-04 6.0 12.0 1.5 6.0 40 0.10 501421-32-06 10.0 16.0 1.5 6.0 40 0.20 501421-32-08 12.7 19.0 1.5 6.0 80 0.20 50

1521-50 AIRCOmP SOfT, COmPRESSOR HOSE, 180°C

ConstructionInner tube: White, food classed, heat resistent ERPCover: Weather and ozone resistent EPDMReinforcement: Synthetic textileSafety factor: 3:1Temperature: -40°C – +180°CDesign: Wrapped, blue

Applications/CharacteristicsA hose for air connections from compressors on trucks for bulk transportation of powder products. The hose sustains high temperatures. The cover is weather and ozone resistant.

Product group: 142

Part ID OD Work pr. Weight Length number mm mm MPa kg/m m/coil

1521-50-48 76.0 94.0 1.0 2.63 401521-50-56 90.0 108.0 1.0 3.46 401521-50-64 102.0 120.0 1.0 4.02 40


1:41422 AIR PRESSURE HOSE, PvC

ConstructionInner tube: PVCCover: PVCReinforcement: PolyesterSafety factor: 3:1Temperature: -20°C – +60°CDesign: Smooth, transparent

Applications/CharacteristicsThis hose is used for compressed air and for transportation of water. It is especially suit-able for indoor use. Not for gasoline use. Food approved.

Product group: 142

Part ID OD Work pr. Bend rad. Weight Length number mm mm at 20° C,MPa mm kg/m m/coil

1422-00-04 6.3 12.0 2.0 30 0.08 501422-00-05 8.0 14.0 1.8 40 0.10 501422-00-06 10.0 16.0 1.8 55 0.12 501422-00-08 12.5 19.0 1.2 75 0.16 501422-00-10 16.0 22.0 1.0 100 0.21 501422-00-12 19.0 26.0 1.0 120 0.30 501422-00-16 25.0 33.0 0.8 175 0.44 25/501422-00-20 32.0 42.0 0.8 225 0.70 251422-00-24 38.0 48.0 0.8 295 0.82 251422-00-32 50.0 62.0 0.8 415 1.28 25

1424 AIR PRESSURE HOSE, PvC, 20 bAR

ConstructionInner tube: PVCCover: PVCReinforcement: PolyesterSafety factor: 3:1Temperature: -15°C – +60°CDesign: Smooth, beige

Applications/CharacteristicsQuality hose for compressed air tools. Extremely flexible, weather resistant and durable. The hose is easy to handle even at low temperatures.

Product group: 142


1424-00-04 6.3 11.0 2.0 45 0.08 501424-00-05 8.0 13.0 2.0 56 0.10 501424-00-06 10.0 15.5 2.0 70 0.14 501424-00-08 12.7 19.0 2.0 89 0.20 501424-00-10 16.0 23.0 2.0 112 0.27 501424-00-12 19.0 26.5 2.0 133 0.33 501424-00-16 25.0 33.5 2.0 175 0.48 50


1424-10 AIR PRESSURE HOSE, PvC, 40 bAR

ConstructionInner tube: PVCCover: PVCReinforcement: Braid of textileSafety factor: 3:1Temperature: -15°C – +60°CDesign: Smooth, blue

Applications/CharacteristicsA flexible PVC hose for high air pressures. Used in the industry and agriculture.

Product group: 142


1424-10-04 6.3 12.5 4.0 44 0.12 501424-10-06 10.0 17 4.0 70 0.20 501424-10-08 12.0 20 4.0 84 0.26 501424-10-10 16.0 24 4.0 112 0.32 501424-10-12 19.0 28 4.0 133 0.40 501424-10-16 25.0 35 4.0 175 0.61 50

1424-20 AIR PRESSURE HOSE, PvC, 15 bAR

ConstructionInner tube: PVCCover: PVCReinforcement: Polyester fibreSafety factor: 4:1Temperature: -20°C – +60°CDesign: Smooth, light blue with matt finish

Applications/CharacteristicsA very light, flexible and cold resistant hose for compressed air units and tools such as jack hammers, griding machines, breakers, riveters, air chisels ect. This hose is used within mechanical mining and construction industries. It is also suitable for water. Resist-ant to oil mist.

Product group: 142


1424-20-04 6.3 11.0 1.5 45 0.08 501424-20-05 8.0 13.0 1.5 56 0.10 501424-20-06 10.0 15.5 1.5 70 0.14 501424-20-08 12.7 19.0 1.5 89 0.20 501424-20-10 16.0 23.0 1.5 112 0.27 501424-20-12 19.0 26.5 1.5 133 0.33 501424-20-16 25.0 33.5 1.5 175 0.49 50


1:41424-30 UNIvERSAL PU HOSE, 20 bAR

ConstructionInner tube: PUCover: PVC/NBRReinforcement: Synthetic textileSafety factor: 3:1Temperature: -15°C – +60°CDesign: Smooth, green

Applications/CharacteristicsA very light hose, only 2/3 of a conventional PVC or rubber hose. It is very flexible and has a high ozone resistance. It is also resistant towards lubricates, oils and non-aggres-sive chemicals. Well suited for pneumatic tools and sandblasting. Food quality.

Product group: 142


1424-30-04 6.0 10.0 2.0 20 0.07 1001424-30-05 8.0 12.0 2.0 22 0.11 601424-30-06 10.0 15.0 2.0 38 0.13 501424-30-08 13.0 19.0 2.0 55 0.20 301424-30-10 16.0 23.0 2.0 60 0.25 25

1424-80 AIR PRESSURE HOSE, SOfT

ConstructionInner tube: Buna/PU/PVCCover: Buna/PU/PVCReinforcement: TextileSafety factor: 3:1Temperature: -30°C – +80°CDesign: Smooth, blue

Applications/CharacteristicsAir pressure hose with extreme flexibility at low temperatures. Oil and abrasion resistant hose suitable as air gun hose.

Product group: 142


1424-80-04 6.0 12.0 2.0 25.0 0.11 50.01424-80-05 8.0 14.0 1.5 30.0 0.13 50.01424-80-06 9.5 15.5 1.5 40.0 0.14 50.01424-80-08 12.7 19.5 1.2 50.0 0.23 50.0


1425 mANTEX, AIR PRESSURE HOSE, LAY-fLAT

ConstructionInner tube: Abrasion and oil resistant PVC/NBRCover: Abrasion and oil resistant PVC/NBRReinforcement: Synthetic textileSafety factor: 5:1Temperature: -30°C – +70°CDesign: Lay-flat, smooth, black

Applications/CharacteristicsAir pressure hose designed for construction sites where low weight is appreciated. The hose sustains a lot of external abrasion and can be stored laying flat. Can be delivered in lengths of up to 200 meters.

Product group: 142


1425-00-12 20.0 25.0 2.0 0.17 601425-00-16 25.0 31.0 2.0 0.24 601425-00-24 38.0 43.0 1.2 0.39 601425-00-32 51.0 57.0 1.2 0.56 601425-00-40 65.0 75.0 1.2 0.70 601425-00-48 76.0 88.0 1.2 0.90 601425-00-64 102.0 117.0 1.2 1.05 60

1424-00-1690 fLATAIR, AIR PRESSURE HOSE, LAY-fLAT, 20 bAR

ConstructionInner tube: Abrasion and oil resistant PVC/NBRCover: Abrasion and oil resistant PVC/NBRReinforcement: Synthetic textileSafety factor: 5:1Temperature: -30°C – +70°CDesign: Lay-flat, smooth, yellow

Applications/CharacteristicsAir pressure hose designed for construction sites where low weight is appreciated. The hose sustains a lot of external abrasion and can be stored laying flat. Can be delivered in lengths of up to 200 meters.

Product group: 142


1425-00-1690 25.0 31.0 2.0 0.24 60


1:41425-70 mANTEX HP, AIR PRESSURE HOSE, LAY-fLAT

ConstructionInner tube: Abrasion and oil resistant PUCover: Abrasion and oil resistant PUReinforcement: Synthetic textileSafety factor: 5:1Temperature: -30°C – +70°CDesign: Lay-flat, smooth, orange

Applications/CharacteristicsAir pressure hose designed for construction sites (well drilling) where low weight is ap-preciated. Due to the PU-design, the hose sustains an extreme amount of external abra-sion and can be stored laying flat. Can be delivered in lengths of up to 200 meters.

Product group: 142


1425-70-32 51.0 57.0 3.0 0.70 1425-72-32 51.0 57.0 3.0 0.70 201425-74-32 51.0 57.0 3.0 0.70 40

1425-10 ARmTEX, fIRE HOSE

ConstructionInner tube: Red nitrile/PVCCover: Red nitrile/PVCReinforcement: TextileSafety factor: 3:1Temperature: -30°C – +70°CDesign: Smooth, red

Applications/CharacteristicsFire hose manufactured according to NS 4016-4018/SS 2840/DIN 1411/NEN 2242 and BS 6391 type 3. Can be delivered in lengths of up to 200 meters.

Product group: 142

Part ID Burst pr. Weight Length number mm MPa kg/m m/coil

1425-10-16 25.0 10.0 0.275 15; 20; 25; and 301425-10-24 38.0 5.5 0.300 15; 20; 25; and 301425-10-32 51.0 4.5 0.380 15; 20; 25; and 301425-10-40 65.0 4.5 0.530 15; 20; 25; and 301425-10-48 76.0 4.0 0.700 15; 20; 25; and 301425-10-64 102.0 3.5 1.050 15; 20; 25; and 30


1425-30 GETEX, fIRE HOSE

ConstructionInner tube: EPDMCover: White polyester weaveReinforcement: TextileSafety factor: 3:1Temperature: -50°C – +90°CDesign: Smooth, white

Applications/CharacteristicsLow weight fire hose used by Scandinavian fire departments. Can be delivered in lengths of up to 1,000 meters/coil.

Product group: 142

Part ID Work pr. Weight Length number mm MPa kg/m m/coil

1425-30-16 25.0 1.5 0.120 15; 20; 25 and 301425-30-24 38.0 1.5 0.180 15; 20; 25 and 301425-30-32 51.0 1.5 0.270 15; 20; 25 and 301425-30-40 65.0 1.5 0.320 15; 20; 25 and 301425-30-48 76.0 1.5 0.400 15; 20; 25 and 301425-30-64 102.0 1.2 1.650 15; 20; 25 and 30

1426 AIRbRAKE SAE J1402-A, bRAKE HOSE

ConstructionInner tube: NBR/SBRCover: CRReinforcement: TextileSafety factor: 6.21:1Temperature: -40°C – +93°CDesign: Smooth, black

Applications/CharacteristicsBrake hose for vehicles and pneumatic systems. Manufactured according to SAE J14002-A.

Product group: 142


1426-00-09 9.5 19.0 1.0 89 0.30 401426-00-12 12.7 22.2 1.0 102 0.37 401426-00-14 14.5 24.5 1.0 114 0.43 40


1:41426-10 AIRbRAKE DIN 74310, bRAKE HOSE

ConstructionInner tube: EPDMCover: EPDMReinforcement: Synthetic textileSafety factor: 2.5:1Temperature: -40°C – +70°CDesign: Smooth, black

Applications/CharacteristicsBrake hose for vehicles and pneumatic systems. Manufactured according to DIN 74310.

Product group: 142


1426-10-11 11.0 18.0 1.0 70 0.22 401426-10-13 13.0 25.0 1.0 100 0.49 40

1429 PvC HOSE, TRANSPARENT

ConstructionInner tube: PVCCover: PVCReinforcement: NoneSafety factor: 3:1Temperature: -10°C – +60°CDesign: Smooth, transparent, 75° shore

Applications/CharacteristicsA PVC hose with no reinforcement designed for transportation of water and air. Other dimensions are available on request.

Product group: 141


1429-02-04 2.0 4.0 1001429-03-05 3.0 5.0 501429-04-06 4.0 6.0 1001429-04-07 4.0 7.0 501429-05-08 5.0 8.0 501429-05-09 5.0 9.0 501429-06-09 6.0 9.0 501429-08-11 8.0 11.0 501429-08-12 8.0 12.0 501429-09-12 9.0 12.0 501429-09-14 9.0 14.0 501429-11-15 11.0 15.0 501429-12-15 12.0 15.0 501429-12-17 12.0 17.0 501429-19-23 19.0 23.0 50


1430 HYDROIL, OIL PRESSURE HOSE, 10 bAR

ConstructionInner tube: NBRCover: NBRReinforcement: Synthetic textileSafety factor: 3:1Temperature: -20°C – +80°CDesign: Smooth, black

Applications/CharacteristicsReturn hose for hydraulic systems, farm tanks, diesel, mineral oils, gasoline and unlead-ed gasoline. Also suitable for water, lubricants etc. This hose has an antistatic synthetic rubber cover. For larger dimensions, see 1435.

Product group: 143


1430-00-03 5.0 11.5 1.0 30 0.11 1001430-00-04 6.0 13.0 1.0 35 0.14 401430-00-05 8.0 15.0 1.0 40 0.17 401430-00-06 10.0 17.0 1.0 45 0.20 401430-00-08 13.0 20.5 1.0 50 0.26 401430-00-10 16.0 24.0 1.0 60 0.32 401430-00-12 19.0 27.0 1.0 65 0.40 401430-00-16 25.0 35.0 1.0 80 0.62 40

1432-50 mULTIOIL, OIL PRESSURE HOSE, 20 bAR

ConstructionInner tube: Nitrile (NBR) Electric resistanceCover: NBR/EPDM Reinforcement: Synthetic textileSafety factor: 4:1Temperature: -30°C – +100°CDesign: Smooth, black

Applications/CharacteristicsA very good all-round hose for many applications, such as return hose for hydraulic systems, diesel, gasoline, unleaded gasoline, RME (Rape-Methyl-Ester) and E85 fuel with max 30% mixture etc. The cover is resistant to external oil, abrasion, weather and heat. Electric resistance 106 Ohm.

Product group: 143

Part ID ID OD Work pr. Bend rad. Weight Length number mm inch mm MPa mm kg/m m/coil

1432-50-04 6.0 1/4" 13.0 2.0 30 0.14 401432-50-05 8.0 5/16" 15.0 2.0 34 0.17 401432-50-06 10.0 3/8" 17.0 2.0 38 0.19 401432-50-08 13.0 1/2" 21.0 2.0 45 0.28 401432-50-10 16.0 5/8" 24.5 2.0 53 0.35 401432-50-12 19.0 3/4" 28.0 2.0 58 0.43 401432-50-16 25.0 1" 35.0 2.0 77 0.62 40


1:41432-10 AUTOOIL, fUEL HOSE

ConstructionInner tube: Nitrile (NBR)Cover: Oil and gasoline resistant rubberReinforcement: Synthetic textileSafety factor: 3:1Temperature: -30°C – +100°CDesign: Smooth, black (S) / Green textile coated cover

Applications/CharacteristicsThis hose is resistant to leaded and unleaded gasoline and diesel. It is suitable for engine aggregates. The hose is delivered on bobbins. Hose stands can be ordered with part number 1432-10-00K (except for 1432-10-06S).

Product group: 143

Part ID OD Work pr. Bend rad. Weight Length number mm mm MPa mm kg/m m/bobbin

1432-10-02 3.0 7.0 1.0 27 0.06 151432-10-02S 4.0 9.0 1.0 30 0.07 151432-10-03S 5.0 10.0 1.0 40 0.08 151432-10-04S 6.0 13.0 1.0 55 0.14 151432-10-05 7.5 14.5 1.0 63 0.14 151432-10-05S 7.5 14.5 1.0 65 0.15 151432-10-06S 10.0 16.0 1.0 75 0.16 10

1432-30 YACHTOIL SW, mARINE fUEL HOSE, ISO 7840

ConstructionInner tube: Nitrile (NBR)Cover: Oil, fire and weather resistant rubber (CR)Reinforcement: Synthetic textileSafety factor: See table belowTemperature: -20°C – +80°CDesign: Smooth, black

Applications/CharacteristicsA very flexible fuel hose that is resistant to gasoline, unleaded gasoline and diesel. The hose is manufactured according to SS-EN ISO 7840 A1 regarding flame resistance and permeability. This means that it can sustain 2.5 minutes in open fire without leaking. For larger dimensions, see 1432-31. Approved by the Bureau Veritas.

Product group: 143

Part ID OD Work pr. Burst pr. Bend rad. Weight Length number mm mm MPa MPa mm kg/m m/coil

1432-30-02 4.0 14.0 1.0 3.4 25 0.19 1001432-30-03 5.0 15.0 1.0 3.4 30 0.20 1001432-30-04 6.0 16.0 1.0 3.4 35 0.24 1001432-30-05 8.0 18.0 1.0 3.4 50 0.28 1001432-30-06 10.0 20.0 1.0 3.4 60 0.28 1001432-30-08 12.5 22.0 1.0 2.5 75 0.35 1001432-30-10 16.0 26.0 1.0 2.5 100 0.46 801432-30-12 19.0 29.0 1.0 2.5 115 0.53 801432-30-16 25.0 35.0 1.0 2.5 150 0.66 50

CertificateCertificate


1432-31 YACHTOIL SW, mARINE fUEL HOSE, ISO 7840

ConstructionInner tube: Nitrile (NBR)Cover: Oil, fire and weather resistant rubber (CR)Reinforcement: Synthetic textileSafety factor: 8:1Temperature: -20°C – +80°CDesign: Wrapped, black

Applications/CharacteristicsThis hose is manufactured according to SS-EN ISO 7840 A1 regarding flame resistance and permeability. This means that it can sustain 2.5 minutes in open fire without leak-ing. It is used as a fuel refill hose on smaller boats. Approved by the Bureau Veritas.

Product group: 143

Part ID OD Work pr. Bend rad. Weight Length number mm mm MPa mm kg/m m/bobbin

1432-31-20 32.0 44.0 0.25 320 0.99 401432-31-24 38.0 50.0 0.25 380 1.14 401432-31-32 50.0 62.0 0.25 500 1.44 401432-31-38 55.0 67.0 0.25 550 1.57 401432-31-40 63.0 76.0 0.25 635 1.86 401432-31-48 76.0 88.0 0.25 760 2.10 20


1433 OIL SUCTION HOSE, PvC

ConstructionInner tube: Oil resistant PVCCover: Oil resistant PVCReinforcement: Embedded spiralSafety factor: 3:1Temperature: -25°C – +55°CDesign: Lightly corrugated, blue

Applications/CharacteristicsThis hose is suitable for suction and pressure applications for paraffin, lubricating oil and mineral based hydraulic oils. It is flexible and easy to handle.

Product group: 143


1433-00-12 19.0 24.0 0.60 90 0.45 70 501433-00-16 25.0 31.0 0.60 90 0.50 70 301433-00-20 32.0 41.0 0.50 110 0.60 70 301433-00-24 38.0 47.0 0.50 130 0.70 70 301433-00-32 51.0 61.0 0.45 175 1.05 70 501433-00-40 63.0 75.0 0.40 220 1.39 70 301433-00-48 76.0 88.0 0.35 270 1.70 70 501433-00-64 102.0 116.0 0.25 360 2.70 70 30


1:41434 EXmARIN, EXHAUST GAS / mARINE REfILL HOSE

ConstructionInner tube: Oil resistant synthetic rubber (NBR)Cover: Oil resistant synthetic rubber (NBR/SBR)Reinforcement: Synthetic textile with a steel spiralSafety factor: 3:1Temperature: -30°C – +100°CDesign: Wrapped, black

Applications/CharacteristicsThe hose is suitable for exhaust gas and refill for boats. It fulfils the require-ments of Nordic Boat Standard and the Norsk Veritas according to 94/25EC and ISO 7840A1. This means that it can sustain 2.5 minutes in open fire without leaking. It is also CE branded.

Product group: 143


1434-00-16 25.0 35.0 0.3 150 0.78 401434-00-20 32.0 42.0 0.3 190 0.94 401434-00-24 38.0 48.0 0.3 230 1.09 401434-00-25 40.0 50.0 0.3 240 1.14 401434-00-30 45.0 55.0 0.3 270 1.27 401434-00-32 50.0 60.0 0.3 300 1.41 401434-00-38 55.0 65.0 0.3 330 1.53 401434-00-40 63.5 73.5 0.3 380 1.86 401434-00-48 76.0 86.0 0.3 460 2.25 201434-00-56 90.0 100.0 0.3 540 2.67 201434-00-64 102.0 112.0 0.3 610 3.02 201434-00-80 125.0 141.0 0.6 880 6.10 401434-02-03 203.0 224.0 0.5 1,400 9.50 12


1434-10 EXLIGHT, LOW WEIGHT EXHAUST GAS HOSE

ConstructionInner tube: Heat resistant rubberReinforcement: Embedded abrasion resistant spiral of polyamideTemperature: -40°C – +170°CDesign: Outer spiral, black

Applications/CharacteristicsThis hose is suitable for suction of exhausts from motor vehicles. Beneficial to use on hose reels in garages. It can resist deformation, i.e. it is possible to run it over. The hose is also suitable as a exhaust hose for welding gases. Low weight and extremely flexible. Upon request, it can be delivered with end sleeves and/or flame resistant design.

Product group: 148

Part ID OD Bend rad. Weight Length number mm mm mm kg/m m/coil

1434-10-24 38.0 42.0 60 0.57 201434-10-32 50.0 53.0 65 0.61 201434-10-48 75.0 77.0 95 0.70 201434-10-64 102.0 104.0 110 0.94 201434-10-80 127.0 131.0 130 1.30 201434-10-96 150.0 153.0 140 1.45 20


1435 TANKOIL SW, GAS TRUCK HOSE, 10/20 bAR

ConstructionInner tube: NBRCover: NBR/SBRReinforcement: Synthetic textileSafety factor: 3:1Temperature: -35°C – +80°CDesign: Wrapped, black

Applications/CharacteristicsThe hose is designed to be used for transportation of petroleum products with no more than 50% aromatic contents. Good to use on gas trucks, as well as on refineries. Equipped with an antistatic wire.

Product group: 143


1435-00-14 22.0 32.0 1.0 165 0.80 401435-00-16 25.0 35.0 1.0 250 0.61 401435-00-18 28.0 38.0 1.0 240 0.98 401435-00-20 32.0 45.0 1.0 320 1.05 401435-00-24 38.0 51.0 1.0 380 1.21 401435-00-26 42.0 56.0 2.0 340 1.55 601435-00-32 50.0 64.0 1.0 500 1.67 401435-00-40 63.5 79.0 1.0 650 2.17 401435-00-48 75.0 91.0 1.0 750 2.71 401435-00-64 100.0 116.0 1.0 820 2.92 40

1439 TANKOIL HW, TRUCK HOSE WITH SPIRAL, 10 bAR

ConstructionInner tube: NBRCover: NBR/SBRReinforcement: Synthetic textile with spiralSafety factor: 4:1Temperature: -35°C – +80°CDesign: Wrapped, black

Applications/CharacteristicsThe hose is designed to be used for suction and pressure lines with petroleum products with no more than 50% aromatic contents, e.g. gas trucks, tank wagons and refineries. The strong design makes it usable in demanding environments and low temperatures. Electric resistance: <106 Ohm.

Product group: 143


1439-00-20 32.0 44.0 1.0 190 1.13 80 401439-00-24 38.0 50.0 1.0 230 1.31 80 401439-00-32 50.0 65.0 1.0 300 2.07 80 401439-00-40 63.0 79.0 1.0 380 2.71 80 401439-00-48 75.0 91.0 1.0 450 3.26 80 401439-00-64 100.0 116.0 1.0 600 4.76 80 40


1:41469-20 GAS TRUCK HOSE EN12115, 16 bAR S&T

ConstructionInner tube: NBRCover: Oil, weather and abrasion resistant CRReinforcement: Textile and steel spiralSafety factor: 4:1Temperature: -30°C – +80°CDesign: Wrapped, black

Applications/CharacteristicsGas truck hose fulfilling the requirements according to EN12115. The hose is designed to be used with petroleum products with no more than 55% aromatic contents. Designed with textile reinforcement with a twin spiral and two antistatic wires. Electric resistance: <106 Ohm. Vaccum = 90%.

Product group: 143


1469-20-16 25.0 37.0 1.6 150 0.80 40.01469-20-20 32.0 44.0 1.6 200 0.98 40.01469-20-24 38.0 51.0 1.6 230 1.14 40.01469-20-32 51.0 65.0 1.6 300 1.69 40.0

1550 ASPHALT, TAR AND mINERAL SUCTION HOSE, 15 bAR

ConstructionInner tube: Oil resistant rubber (NBR)Cover: Abrasion, ozone and oil resistant rubber (NBR), pin-prickedReinforcement: Braided textile reinforcement with steel spiralSafety factor: 4:1Temperature: -40°C – +200°CDesign: Wrapped, black

Applications/CharacteristicsA venerable asphalt hose for hot asphalt and tar. It is also suitable for transportation of mineral oil products (max +80°C).

Product group: 143


1550-00-32 50.0 64.0 1.5 200 1.95 90 401550-00-40 63.0 77.0 1.5 250 2.40 90 401550-00-48 75.0 90.0 1.5 300 2.95 90 401550-00-64 100.0 116.0 1.5 400 4.47 90 40


1436 COOLOIL, OIL COOLING HOSE

ConstructionInner tube: Nitrile (NBR)Cover: Chloroten (CM)Reinforcement: Synthetic textileSafety factor: 3:1Temperature: -40°C – +140°CDesign: Smooth, black

Applications/CharacteristicsOil cooling hose for engines and installations. Suitable for oil and glycol mixtures. For fittings, see chapter 5:0.

Product group: 143

Part ID OD Work pr. Bend rad. Weight Length number NW mm mm MPa mm kg/m m/coil

1436-00-02 2 4.0 10.0 7.5 30 0.15 201436-00-04 4 6.0 12.0 6.5 40 0.20 201436-00-06 6 8.0 14.0 5.5 50 0.23 201436-00-08 8 9.5 15.5 5.0 60 0.25 201436-00-10 10 12.0 19.0 6.0 70 0.33 201436-00-13 13 15.0 23.0 4.0 90 0.50 201436-00-16 16 18.0 26.0 3.5 110 0.65 201436-00-20 20 22.0 31.0 3.3 120 0.71 201436-00-25 25 25.0 34.0 3.3 140 0.85 20

1436-50 mATHILDA P.T.f.E. ISO 7840A1

ConstructionInner tube: Smooth P.T.F.E. (Teflon ®)Cover: CSMReinforcement: One braid of stainless steel wireSafety factor: 4:1Temperature: -60°C – +250°C (Cover: -40°C – +150°C)Design: Wrapped, black

Applications/CharacteristicsA hose for demanding environments where high temperature, high pressure, chemical resistance and elastic characteristics are required. Excellent for e.g. paint, fuels, hydraulic oils and food. Age resistant. The inner tube is not an active conductor. Stainless reinforce-ment according to AISI 304. Fulfils the requirements of ISO 7840A1.



1436-50-04 6.4 12.2 15.0 38 0.171436-50-05 8.0 13.7 12.5 56 0.191436-50-06 9.5 15.5 10.0 64 0.231436-50-08 12.7 18.5 8.2 89 0.331436-50-10 15.6 22.6 7.5 114 0.39

Certificate MED


1:41437 RAGOIL, fUEL HOSE

ConstructionInner tube: Oil resistant rubberCover: Oil resistant rubber, one outer braid of steelSafety factor: 2.5:1Temperature: -40°C – +80°CDesign: Metal reinforcement

Applications/CharacteristicsThe hose is designed for oil and diesel pipes, and also to be used as a lubrication oil hose. It does not sustain unleaded gasoline. For fuel fittings, see chapter 5:0.

Product group: 143

Part ID OD Work pr. Bend rad. Weight Length number NW mm mm MPa mm kg/m m/coil

1437-00-02 2 3.5 8.5 3.2 25 0.13 201437-00-03 3 4.5 9.5 3.0 25 0.15 201437-00-04 4 5.5 10.5 3.0 25 0.19 201437-00-06 6 7.5 12.5 2.4 30 0.22 201437-00-08 8 9.5 15.0 2.0 40 0.25 201437-00-10 10 11.0 17.5 2.0 45 0.29 201437-00-13 13 14.0 21.5 1.8 50 0.37 201437-00-16 16 17.5 26.0 1.4 70 0.48 201437-00-20 20 20.5 32.0 1.4 90 0.55 20

1438 R-fOUR, RETURN AND SUCTION HOSE, SAE 100 R4

ConstructionInner tube: Oil resistant synthetic rubber (NBR)Cover: Weather and oil resistant rubber (SBR)Reinforcement: Two weave inlays and one spiralSafety factor: 4:1Temperature: -40°C – +100°CDesign: Wrapped, black

Applications/CharacteristicsSuction and refill hose for hydraulic systems. Also suitable for low pressure hydraulics. The hose fulfils requirements according to SAE 100 R4.

Product group: 143


1438-00-10 15.0 25.0 2.1 75 0.50 90 401438-00-12 19.0 30.0 2.1 120 0.63 90 401438-00-14 22.0 32.0 1.7 90 0.70 90 401438-00-16 25.0 36.0 1.7 152 0.79 90 401438-00-20 32.0 43.0 1.4 203 0.97 90 401438-00-24 38.0 50.0 1.0 254 1.27 90 401438-00-26 42.0 54.0 0.8 275 1.40 90 401438-00-32 50.0 62.0 0.7 305 1.60 90 401438-00-39 60.0 74.0 0.4 350 2.35 90 401438-00-40 63.0 76.0 0.4 355 2.41 90 401438-00-48 76.0 90.0 0.4 457 3.15 90 401438-00-64 102.0 116.0 0.2 600 4.40 90 40


1580 COmP LD

ConstructionThe Comp LD hose consists of a number of layers of polypropylene and polyethylene films. Together with a weather and abrasion resistant cover, they are jointed with an external and an internal coil of spring. This construction gives the hose an extraordinary stability and at the same time full flexibility. When the lowest possible weight is needed, the hoses can be fitted with an inter-nal and external spiral made of aluminium.Colour: BlueSpirals: The standard version is equipped with galvanised steel spirals (Z) internally and externally. Also available with aluminium (A) or polypropylene covered steel spirals upon request.

Temperature: -40°C – +80°C

Applications/CharacteristicsThe COMP LD hose is made for transportation of several different medias under pressure as well as suction. This hose is being used in connection with loading and unloading gas trucks and tank waggons on railways, as well as for transportation between different tanks at industries. COMP LD is 100% aromatically resistant. Electric continuity is achieved when the two spirals are put towards the hose’s fittings. In this way, static electricity is avoided. The electric resistance in an assembled hose is less than 10 Ohm, according to BS 5842:1980 § 6.2.Product group: 150

Part ID ID WP BP BR Weight ZZ Weight AZ Weight AA Length number mm inch MPa MPa mm kg/m kg/m kg/m max

1580-00-24 40.0 1 1/2" 1.0 5.0 85 1.3 1.0 0.6 25 m1580-00-32 50.0 2" 1.0 5.0 125 2.6 1.5 1.0 25 m1580-00-40 63.0 2 1/2" 1.0 5.0 150 2.9 2.0 1.3 25 m1580-00-48 76.0 3" 1.0 5.0 185 3.4 2.6 1.6 25 m1580-00-51 80.0 3" 1.0 5.0 185 3.5 2.7 1.7 25 m1580-00-64 100.0 4" 1.0 5.0 275 4.6 3.5 2.3 25 m

1581 COmP OIL 800

ConstructionCOMP OIL 800 is made of polypropylene with a weather proof and abrasion resistant Polyester/Polyvinyl chloride cover. COMP OIL 800 has, in order to attain a better flexibility and a longer life-span, a layer of polyiethylene, which also makes it gas-tight.Colour: Dark blueSpirals: The standard version has galvanised steel spirals internally and externally (ZZ). Stainless steel spirals are available upon request.

Temperature: -40°C – +100°C

Applications/CharacteristicsThe COMP OIL 800 hose is made for transportation of a number of different petroleum products under pressure as well as suction. This hose is used in connection with loading and unloading gas trucks and tank wagons on railways as well as for transportation between different tanks at industries. Especially made for distributing oils, gasoline, diesel, lubrication oils and paraffine. The COMP OIL 800 hose is 100% aromatically resistant. Electric continuity is attained when the two spirals are put towards the hose’s fittings. In this way, static electricity is avoided. The electrical resistance in an assembled hose is less than 10 Ohm, according to BS 5842:1980 § 6.2. On request, a special flame resistant version can also be delivered.Product group: 150

Part ID ID Work pr. Burst pr. Bend rad. Weight Length number mm inch MPa MPa mm kg/m max

1581-00-12 20.0 3/4" 1.5 7.5 50 0.7 25 m1581-00-16 25.0 1" 1.5 7.5 75 0.9 25 m1581-00-20 32.0 1 1/4" 1.5 7.5 80 1.0 25 m1581-00-24 40.0 1 1/2" 1.5 7.5 85 1.2 25 m1581-00-32 50.0 2" 1.5 7.5 125 1.8 25 m1581-00-40 63.0 2 1/2" 1.5 7.5 150 2.5 25 m1581-00-48 76.0 3" 1.5 7.5 185 3.0 25 m1581-00-64 100.0 4" 1.5 7.5 275 4.3 25 m


1:41582 COmP CHEm 700

ConstructionCOMP CHEM 700 is made of polypropylene and polyester with a special weath-er and abrasion resistant outer cover of polyester/PVC. All layers are jointed between inner and outer spirals. This construction makes the hose meet the demands that the chemical industry have, as well as gas truck applications.Colour: GreenSpirals: The standard has an internal polypropylene steel spiral and a galvanised outer spiral.Temperature: -40°C – +100°C

Applications/CharacteristicsThis hose is suitable as a chemical hose with a wide resistance range. Can be used both as suction and pressure hose. Applications for the hose is loading and unloading of gas trucks and railroad cars, and also within industries in different processes. COMP CHEM 700 is 100% aromatically resistant. Electric continuity is attained when the two spirals are put towards the hose’s fittings. In this way, static electricity is avoided. The electrical resistance in an assembled hose is less than 10 Ohm, according to BS 5842:1980 § 6.2. On request, a special flame resistant version can also be delivered.Product group: 150


1582-20-12 20.0 3/4" 1.5 7.5 50 0.7 25 m1582-20-16 25.0 1" 1.5 7.5 75 0.9 25 m1582-20-20 32.0 1 1/4" 1.5 7.5 80 1.0 25 m1582-20-24 40.0 1 1/2" 1.5 7.5 85 1.2 25 m1582-20-32 50.0 2" 1.5 7.5 125 1.8 25 m1582-20-40 63.0 2 1/2" 1.5 7.5 150 2.5 25 m1582-20-48 76.0 3" 1.5 7.5 185 3.0 25 m1582-20-64 100.0 4" 1.5 7.5 275 4.3 25 m

1583 COmP TEmP 305

ConstructionCOMP HITEMP 305 is built around a number of layers of P.T.F.E, strengthened with films especially made for high temperature applications. With an inner spiral with AISI 316 L stainless steel and with a weather and abrasion proof outer cover of silicone, COMP HITEMP 305 has superior temperature and abrasion characteristics.Colour: BlackSpirals: AISI 316 L stainless inner spiral. Outer spiral of galvanised steel.Temperature: -40°C – +200°C

Applications/CharacteristicsA hose that is made especially for transportation of hot oil and bitumen under suction or pressure. COMP HITEMP 305 is suitable when loading and unloading gas trucks, but also for fixed industrial applications. The P.T.F.E. inner tube makes the hose sleek internally with low friction as a result. All hoses are 100 % aromatically resistant, anti-static and can be used both for suction and pressure applications.Product group: 150


1583-10-12 20.0 3/4" 1.5 7.5 70 0.7 25 m1583-10-16 25.0 1" 1.5 7.5 90 0.8 25 m1583-10-20 32.0 1 1/4" 1.5 7.5 100 1.0 25 m1583-10-24 40.0 1 1/2" 1.5 7.5 110 1.1 25 m1583-10-32 50.0 2" 1.5 7.5 150 1.5 25 m1583-10-40 63.0 2 1/2" 1.5 7.5 180 1.9 25 m1583-10-48 76.0 3" 1.5 7.5 220 2.4 25 m1583-10-64 100.0 4" 1.5 7.5 300 3.4 25 m


1584 COmP P.T.f.E 300

ConstructionCOMP P.T.F.E. 300 is built around a number of layers of P.T.F.E with inner and outer spirals of stainless steel. The outer tube is made of a weather and abrasion resistant polyester/polyvinyl chloride. The hose has a good weather and ozone survivability. COMP P.T.F.E. 300 is an excellent hose that can be used as an allround hose with a smaller number of hoses and a longer life span.Colour: RedSpirals: Stainless inner and outer spirals.Temperature: -40°C – +100°C

Applications/CharacteristicsEspecially made for use as a universal hose for transportation of a wide spectra of aggressive medias. The hose is suitable when loading and unloading gas trucks and railroad cars as well as within the industry in different processes. Electric continuity is attained when the two spirals are put towards the hose’s fittings. In this way, static elec-tricity is avoided. The electric resistance in an assembled hose is smaller than 10 Ohm, according to BS 5842:1980 § 6.2. On request, a special flame resistant version can also be delivered.Product group: 150


1584-11-12 20.0 3/4" 1.5 7.5 65 0.8 25 m1584-11-16 25.0 1" 1.5 7.5 80 1.0 25 m1584-11-20 32.0 1 1/4" 1.5 7.5 90 1.1 25 m1584-11-24 40.0 1 1/2" 1.5 7.5 100 1.3 25 m1584-11-32 50.0 2" 1.5 7.5 140 1.9 25 m1584-11-40 63.0 2 1/2" 1.5 7.5 165 2.6 25 m1584-11-48 76.0 3" 1.5 7.5 215 3.2 25 m1584-11-64 100.0 4" 1.5 7.5 290 4.6 25 m

1585 COmP CHEm LD GAS RETURN

ConstructionThe COMP LD hose consists of a number of layers polypropylene and polythylene films. Together with a weather and abrasion resistant outer cover, they are jointed with an external and an internal coil of spring. This construction gives the hose an exceptional stability and at the same time maximum flexibility. When the lowest possible weight is needed, the hoses can be equipped with spirals of aluminium.Colour: OrangeSpirals: The standard version has galvanised steel spirals (Z) internally and externally. Also available with spirals of aluminium (A) or polypropylene coated steel spirals, on request.Temperature: -40°C – +100°C

Applications/CharacteristicsA special hose for gas recycling on gas trucks and related industries. The COMP LD hose is 100% aromatically resistant. Electric continuity is attained when the two spirals are put towards the hose’s fittings. In this way, static electricity is avoided. The electric re-sistance in an assembled hose is less than 10 Ohm, according to BS 5842:1980 § 6.2.Product group: 150

Part ID ID WP BP BR Weight ZZ Weight AZ Weight AA Length number mm inch MPa MPa mm kg/m kg/m kg/m max

1585-00-48 76.0 3" 1.0 5.0 185 3.4 2.6 1.6 25 m1585-00-64 100.0 4" 1.0 5.0 275 4.6 3.5 2.3 25 m


1:41440 WELDARC, WELDING HOSE EN 559, 20 bAR

ConstructionInner tube: Synthetic rubber (SBR)Cover: Synthetic rubber (SBR/EPDM)Reinforcement: PolyesterSafety factor: 3:1Temperature: -25°C – +100°CDesign: Ribbed, red or blue

Applications/CharacteristicsThis welding hose is suitable for all types of aggregates, high ignition temperature and low diffusion. According to the latest European Norm EN 559.

Product group: 144

Part ID OD Work pr. Bend rad. Weight Length number mm mm MPa mm kg/m Colour m/coil

1440-01-03 5.0 12.0 2.0 40 0.13 Red 801440-02-03 5.0 12.0 2.0 40 0.13 Blue 801440-01-04 6.3 13.3 2.0 40 0.15 Red 801440 -02-04 6.3 13.3 2.0 40 0.15 Blue 801440-01-05 8.0 15.0 2.0 40 0.17 Red 801440-02-05 8.0 15.0 2.0 40 0.17 Blue 801440-01-06 10.0 17.0 2.0 50 0.20 Red 801440-02-06 10.0 17.0 2.0 50 0.20 Blue 80

1441 TWINARC, TWIN WELDING HOSE EN 559, 20 bAR

ConstructionInner tube: Synthetic rubber (SBR)Cover: Synthetic rubber (SBR/EPDM)Reinforcement: PolyesterSafety factor: 3:1Temperature: -25°C – +100°CDesign: Smooth, red and blue

Applications/CharacteristicsTwin welding hose for engineering and construction industries. The hose is also flexible in low temperatures. According to the latest European Norm EN 559.

Product group: 144


1441-00-03 5.0 12.0 2.0 45 0.25 1001441-00-04 6.3 13.3 2.0 60 0.29 1001441-00-05 8.0 15.0 2.0 75 0.34 1001441-00-06 9.0 16.0 2.0 90 0.38 100


1442 HEATSEAKER, LIQUIfIED PETROLEUm GAS HOSE, EN 559, 20 bAR

ConstructionInner tube: Synthetic rubber (NBR)Cover: Synthetic rubberReinforcement: Synthetic textileSafety factor: 3:1Temperature: -30°C – +80°CDesign: Smooth, orange

Applications/CharacteristicsFlexible rubber hose for transportation of liquified petroleum gas (LPG). Suitable for LPG kitchens, burners, soldering, melting. The hose is cold resistant in order to function out-doors. According to the latest European Norm EN 559.

Product group: 144


1442-00-05 8.0 14.0 2.0 65 0.15 401442-00-06 10.0 17.0 2.0 75 0.22 40

1442-10 LIQUIfIED PETROLEUm GAS HOSE, R1AT

ConstructionInner tube: Oil resistant rubber (NBR)Cover: Synthetic rubber, pin-prickedReinforcement: One braid of steel wireTemperature: -40°C – +100°CDesign: Wrapped, orange

Applications/CharacteristicsHigh pressure hose suitable for liquified petroleum gas (LPG), especially on construction sites.

Product group: 144


1442-10-06 9.5 18.0 3.0 110 0.361442-10-08 13.0 21.5 3.0 160 0.451442-10-12 19.0 28.5 3.0 240 0.761442-10-16 25.0 36.6 3.0 300 1.08


1:41443 TWIN HOSE, LIQUIfIED PETROLEUm GAS, EN 559

ConstructionInner tube: Synthetic rubber (SBR)Cover: Synthetic rubber (SBR/EPDM)Reinforcement: Synthetic textileSafety factor: 3:1Temperature: -25°C – +100°CDesign: Smooth, orange and blue

Applications/CharacteristicsTwin hose for liquified petroleum gas (LPG) and oxygen. According to the latest European Norm EN 559.

Product group: 144


1443-00-04 6.3 13.3 2.0 60 0.29 1001443-00-06 10.0 17.0 2.0 90 0.38 100

1445-10 COLDSEEKER, AC HOSE

ConstructionInner tube: Nitrile (NBR)Cover: CSM-EPDMReinforcement: Textile and a barrier of nylonSafety factor: 3.4:1Temperature: -35°C – +120°C, temporarily up to +140°CDesign: Wrapped, black

Applications/CharacteristicsAn excellent hose for cold media. It is resistant towards e.g. freon R134A. A low weight and, due to the nylon barrier, it is a flexible hose with excellent permeability character-istics. The inner tube of nitrile makes it extra tight between fitting and hose. It fulfils the requirements of SAE J51B, A2.

For fittings AC, see chapter 5:0.

Product group: 144

Part ID ID OD Work pr. Bend rad. Length number mm inch mm MPa mm m/coil

1445-10-05 8.0 5/16" 18.5 3.5 70 0.271445-10-06 10.0 13/32" 22.4 3.5 80 0.291445-10-08 13.0 1/2" 24.6 3.5 90 0.441445-10-10 16.0 5/8" 28.1 3.5 105 0.69


1447 NON-fREEZING mEDIA HOSE 9038

ConstructionInner tube: Polyamide (PA)Cover: Oil, weather and abrasion resistant polyurethane (PU)Reinforcement: Two braids of polyesterSafety factor: 4:1Temperature: -40°C – +100°C, temporarily up to +120°CDesign: Smooth, pin-pricked, black

Applications/CharacteristicsA hose that is suitable for freezing media. It is resistant towards freon R134A, and it fulfils the following international standards: SAE 100 R-7, BS4983: 1973, DIN24951-2 and ISO 3945.

Ferrule: 3000-15-06, 3000-10-08

Product group: 144

Part ID ID OD Work pr. Bend rad. Length number mm inch mm MPa mm m/coil

1447-00-06 9.9 3/8" 16.1 15.5 112 0.151447-00-08 13.2 1/2" 19.3 14.0 150 0.18

1448 RAINbOW, CARbON DIOXIDE HOSE

ConstructionInner tube: Food resistant polyester elastomer (PEL)Cover: Oil, weather and abrasion resistant polyurethane (PU)Reinforcement: One braid of polyaramideSafety factor: 4:1Temperature: -40°C – +100°C, max +70°C for water based liquidsDesign: Smooth, pin-pricked cover, black

Applications/CharacteristicsA flexible and light thermoplastic hose for carbon dioxide, nitrogen and mixed gases in the beverage industry. Superb length stability, max 2%. The hose is durable and flexible in the whole temperature range. Food quality. Special fittings available on request.

Product group: 144


1448-00-04 6.5 1/4" 11.7 34.5 51 0.11


1:41450 bUSHmASTER, CHEmICAL HOSE, XLPE, 10 bAR

ConstructionInner tube: XLPECover: EPDMReinforcement: Synthetic textile with a steel spiralSafety factor: 4:1Temperature: -35°C – +100°CDesign: Wrapped, green

Applications/CharacteristicsFlexible hose for suction and pressure applications. The hose is suitable for transporta-tion of chemicals within the petrochemical industry. It is resistant to 90% of all industrial chemicals.

Product group: 145


1450-00-12 19.0 33.0 1.0 160 0.82 80 401450-00-16 25.0 38.0 1.0 200 0.94 80 401450-00-20 32.0 46.0 1.0 260 1.26 80 401450-00-24 38.0 52.0 1.0 300 1.45 80 401450-00-32 51.0 68.0 1.0 400 2.28 80 401450-00-40 63.5 80.0 1.0 510 2.83 80 401450-00-48 76.0 94.0 1.0 610 3.61 80 201450-00-64 102.0 121.0 1.0 820 5.00 80 20

1450-10 CObRA, CHEmICAL HOSE, EPDm, EN 12115

ConstructionInner tube: EPMCover: EPDMReinforcement: Synthetic textile with a steel spiralSafety factor: 4:1Temperature: -35°C – +100°CDesign: Wrapped, black

Applications/CharacteristicsSuction and pressure hose for aggressive chemicals. used for loading and unloading of gas trucks, railroad cars, cargo liners and in stationary installations in chemical premises. The hose is flexible and resists external abrasion well. Electrical resistance < 106 Ohm. According to EN 12115.

Product group: 145


1450-10-32 50.0 64.0 1.6 275 1.84 401450-10-48 75.0 90.0 1.0 350 3.12 401450-10-64 100.0 116.0 1.0 500 4.41 40


1450-30 vIPER, CHEmICAL HOSE, UPE, EN 121115 / GAS TRUCK

ConstructionInner tube: UPECover: EPDMReinforcement: Synthetic textile with a steel spiralSafety factor: 4:1Temperature: -35°C – +100°CDesign: Wrapped, black

Applications/CharacteristicsSuction and pressure hose for aggressive chemicals. Excellent for installations on gas trucks, tank wagons and stationary installations within the chemical industry. Vaccum pressure is max 80%.

Product group: 145

Part ID OD Work pr. Burst pr. Bend rad. Vacuum pr. Weight Length number mm mm MPa MPa mm max % kg/m m/coil

1450-30-12 19.0 31.0 1.6 6.4 190 0.81 80 401450-30-16 25.0 37.0 1.6 6.4 230 0.93 80 401450-30-20 32.0 44.0 1.6 6.4 260 1.20 80 401450-30-24 38.0 51.0 1.6 6.4 340 1.52 80 401450-30-32 50.0 66.0 1.6 6.4 410 2.47 80 401450-30-40 63.5 79.0 1.6 6.4 450 2.73 80 401450-30-48 75.0 91.0 1.0 4.8 530 3.34 80 201450-30-64 100.0 116.0 1.0 4.8 680 4.60 80 20

1456 YELLOW PYTHON, 30 bAR

ConstructionInner tube: Heat resistant rubber (EPDM)Cover: Heat and ozone resistant rubber (EPDM)Reinforcement: Synthetic textileSafety factor: 4:1Temperature: -40°C – +100°CDesign: Smooth, yellow. Wrapped from 32 mm.

Applications/CharacteristicsA very flexile hose with a wide temperature range. Well suited for air and hot and cold water. It is resistant towards lighter chemicals. It has good ozone resistance and will tem-porarily sustain temperatures up to 130°C

Product group: 145


1456-00-04 6.0 14.0 3.0 40 0.19 401456-00-06 10.0 20.0 3.0 60 0.35 401456-00-08 13.0 23.0 3.0 80 0.41 401456-00-10 16.0 27.0 3.0 100 0.55 401456-00-12 19.0 30.0 3.0 110 0.63 401456-00-16 25.0 37.0 3.0 150 0.88 401456-00-24 38.0 51.0 3.0 380 1.35 401456-00-32 50.0 66.0 3.0 500 1.82 40


1:41451-40 SPRAY PAINT HOSE, 20 bAR

ConstructionInner tube: PACover: PVC/PUReinforcement: Synthetic textileSafety factor: 3:1Temperature: -20°C – +60°CDesign: Smooth, red

Applications/CharacteristicsThe hose is suitable as a paint spray hose, with low-weight and excellent flexibility. It is equipped with an antistatic wire and manufactured in a silicone-free process.

Product group: 145


1451-40-04 6.4 12.8 2.9 40 0.12 501451-40-06 9.0 16.3 2.9 60 0.17 50

1552 LOW-WEIGHT SPIRAL SUCTION HOSE

ConstructionInner tube: PVCCover: PVCReinforcement: White PVC spiralSafety factor: 3:1Temperature: -5°C – +60°CDesign: Corrugated, transparent yellow

Applications/CharacteristicsA low-weight PVC hose for suction and pressure applications. The hose is also suitable for powder transportation within agriculture, food industry and gardening. Smooth inner tube. Sustains alcohols beneath 28%.

Product group: 141


1552-00-12 20.0 26.2 0.8 75 0.28 501552-00-16 25.0 31.6 0.8 120 0.33 501552-00-20 32.0 39.2 0.7 150 0.46 501552-00-24 38.0 45.4 0.6 170 0.55 501552-00-25 40.0 47.6 0.6 180 0.61 501552-00-32 50.0 58.2 0.5 220 0.81 501552-00-40 63.0 70.8 0.5 290 1.04 501552-00-48 75.0 85.0 0.4 350 1.38 501552-00-64 102.0 114.0 0.4 480 2.16 25


1552-10 LOW-WEIGHT SPIRAL SUCTION HOSE, PvC, ANTISTATIC

ConstructionInner tube: PVCCover: PVCReinforcement: White PVC spiral with antistatic wireSafety factor: 3:1Temperature: -5°C – +60°CDesign: Corrugated, transparent yellow

Applications/CharacteristicsA low-weight PVC hose for pressure and suction applications. Due to its antistatic wire and smooth inner tube, this hose is mostly suitable for transportation of powder granualtes.

Product group: 147


1552-10-25 40.0 48.0 0.6 170 0.61 70 501552-10-32 50.o 58.0 0.6 220 0.81 70 50

1452 fOODCLEAN, fOOD fLUSH HOSE

ConstructionInner tube: White, food approved synthetic rubber (NBR/IR/CR)Cover: Abrasion and weather resistant synthetic rubber (NBR/PVC)Reinforcement: Synthetic textileSafety factor: 3:1Temperature: -20°C – +95°CDesign: Smooth, blue

Applications/CharacteristicsA hose suitable for hot water cleaning within the food industry. Smooth externally and with a cover that does not stain. The hose is resistant towards animal and vegetable greases. Food proof. Temporarily, the hose can be sterilized with a temperature of max +120°C.

Product group: 146


1452-00-08 13.0 23.0 1.0 105 0.42 401452-00-10 16.0 26.0 1.0 130 0.49 401452-00-12 19.0 31.0 1.0 150 0.71 401452-00-16 25.0 39.0 1.0 200 1.05 40


1:41452-10 fOODSTEAm, fOOD fLUSH HOSE, STEAm

ConstructionInner tube: White, food approved rubber (EPDM)Cover: Abrasion and weather resistant rubber (EPDM)Reinforcement: Synthetic textileSafety factor: 3:1Temperature: -40°C – +95°C for water, +164°C for steamDesign: Wrapped, blue

Applications/CharacteristicsFood approved flush hose for hot water and steam within the food industry. The cover is resistant towards animal and vegetable greases. Manufactured in a way that it will not stain. The hose has a good bending radius and endures tough demands.

Product group: 146

Part ID OD WP 95°C WP 164°C Bend rad. Weight Length number mm mm MPa MPa mm kg/m m/coil

1452-10-08 13.0 24.0 2.0 0.6 100 0.34 401452-10-10 16.0 27.0 2.0 0.6 120 0.51 401452-10-12 19.0 31.0 2.0 0.6 160 0.59 401452-10-16 25.0 37.0 2.0 0.6 200 0.89 40

1553 DAIRYmASTER, mILK HOSE, 6 bAR

ConstructionInner tube: White, food approved synthetic rubber (NR)Cover: Abrasion and weather resistant rubber (NR)Reinforcement: Synthetic textile and a spiralSafety factor: 3:1Temperature: -30°C – +80°CDesign: Wrapped, blue

Applications/CharacteristicsThe hose is especially suited for handling milk during pick-up and transportation, but also for other beverages such as beer, water and alcohol up to 96% concentration. The hose is equivalent to standard/approval CEE-Guide, as well as to FDA, BgVV, IANESCO, VTT and the British Milk Marketing Board.

Product group: 146

Part ID OD Work pr. Vacuum pr. Bend rad. Weight Length number mm mm MPa Max % mm kg/m m/coil

1553-00-20 32.0 43.0 0.6 90 64 0.82 401553-00-24 38.0 49.0 0.6 90 76 1.13 401553-00-32 51.0 62.5 0.6 90 102 1.76 401553-00-40 63.0 74.5 0.6 90 126 2.08 401553-00-48 76.0 89.0 0.6 90 152 2.94 401553-00-64 100.0 113.5 0.6 90 350 3.59 40


1553-10 mULTIfOOD, fOOD HOSE, 10 bAR

ConstructionInner tube: White, food proof rubber (NBR)Cover: Oil and weather resistant rubber (CR)Reinforcement: Synthetic textile and a spiralSafety factor: 3:1Temperature: -30°C – +100°CDesign: Wrapped, blue

Applications/CharacteristicsSuction and pressure hose for liquified food, especially suited for greases and oils, but also for beverages such as juices, milk and alcohol with up to 70% concentration. The hose is also usable for depletion of powder products from gas trucks and tank waggons. Equivalent to standard/approval CEE-Guide, as well as to BgVV and IANESCO.

Product group: 146


1553-10-20 32.0 44.0 1.0 90 65 1.15 401553-10-24 38.0 50.0 1.0 90 75 1.30 401553-10-32 50.0 62.0 1.0 90 125 1.85 401553-10-40 63.0 76.0 1.0 90 160 2.36 401553-10-48 75.0 89.5 1.0 90 225 3.40 401553-10-64 100.0 115.5 1.0 90 500 4.49 40

1553-50 mATERIAL HOSE, PvC

ConstructionInner tube: White, super elastic PVC of NM qualityCover: Black, super elastic PVCReinforcement: Steel spiral and polyesterSafety factor: 3:1Temperature: -25°C – +60°CDesign: Wrapped, black

Applications/CharacteristicsA universal suction and pressure application hose for food, drinking water and alcohol up to 28% concentration. The hose is well suited for water facilities, when loading and unloading tanks and containers; and for dry materials.

Product group: 146


1553-50-48 76.0 92.0 12.0 210.0 2.90 301553-50-64 102.0 119.0 10.0 300.0 4.00 20

The hose can also be delivered in dimensions 3/4" – 6"


1:41454 ONTARIO, STEAm HOSE, 17 bAR

ConstructionInner tube: Heat resistant rubber (EPDM)Cover: Heat and abrasion resistant rubber (EPDM)Reinforcement: Two spirals of corrosion proofed steelSafety factor: 10:1Temperature: -40°C – +210°CDesign: Wrapped, black

Applications/CharacteristicsSteam hose for high pressures and temperatures. Low-weight and flexible. The hose is suitable for heating and cleaning within the road, petrochemical, paper and pulp indus-tries. The hose can temporarily sustain temperatures up to 232°C.

Product group: 149


1454-00-06 10.0 21.0 1.7 0.36 601454-00-08 13.0 25.0 1.7 0.49 601454-00-12 19.0 32.0 1.7 0.72 601454-00-16 25.0 38.0 1.7 0.96 601454-00-20 32.0 46.0 1.7 1.28 601454-00-24 38.0 54.0 1.7 1.59 601454-00-32 51.0 67.0 1.7 2.25 60


1454-10-06 10.0 20.0 0.7 100.0 0.35 401454-10-08 13.0 23.0 0.7 130.0 0.40 401454-10-12 19.0 31.0 0.7 190.0 0.60 401454-10-16 25.0 39.0 0.7 250.0 0.78 401454-10-20 32.0 46.0 0.7 320.0 1.05 401454-10-24 38.0 54.0 0.7 380.0 1.23 401454-10-25 40.0 56.0 0.7 400.0 1.26 401454-10-32 50.0 69.0 0.7 500.0 1.69 401454-10-40 63.0 81.0 0.7 630.0 2.09 401454-10-48 76.0 95.0 0.7 760.0 2.41 40

1454-10 AmAZONAS, STEAm HOSE

ConstructionInner tube: EPDMCover: EPDMReinforcement: Synthetic textileSafety factor: 10:1Temperature: -40°C – +170°CDesign: Wrapped, red

Applications/CharacteristicsSteam hose for low pressures. The hose is flexible and kink resistant. The hose suit-able for saturated steam up to 170°C and for hot water up to 90°C. Can also be used for lighter chemicals and mild acids.

Product group: 149



1454-30-08 13.0 25.0 1.8 0.49 601454-30-12 19.0 33.0 1.8 0.76 601454-30-16 25.0 40.0 1.8 1.04 601454-30-24 38.0 54.0 1.8 1.57 601454-30-32 50.0 68.0 1.8 2.53 60

1454-30 NIAGARA, STEAm HOSE, DIN 2825, 18 bAR

ConstructionInner tube: Heat resistant rubber (EPDM)Cover: Heat and abrasion resistant rubber (EPDM)Reinforcement: Two spirals of corrosion proofed steelSafety factor: 10:1Temperature: -40°C – +210°CDesign: Wrapped, black

Applications/CharacteristicsSteam hose suitable for high pressures and temperatures to be used for heating and cleaning. According to DIN 2825.

Product group: 149

1458 CASPIAN, bOAT SANITARY HOSE

ConstructionInner tube: Diffusion proofed rubber (EPDM)Cover: EPDMReinforcement: Synthetic textile with a steel spiralSafety factor: 3:1Temperature: -30°C – +100°CDesign: Wrapped, white

Applications/CharacteristicsA hose for lavatories on boats. Will not release odour from the toilet system. Resistant to high vacuum.

Product group: 150


1458-00-12 19.0 29.0 1.0 121 0.80 80 401458-00-16 25.0 35.0 0.7 160 0.94 80 401458-00-24 38.0 48.0 0.7 240 1.38 80 40


1:41458-10 WATER HOSE, 10 bAR

ConstructionInner tube: Blue PVCCover: PVCReinforcement: Knitted textileSafety factor: 2.2:1Temperature: -15°C – +60°CDesign: Smooth, white

Applications/CharacteristicsAn excellent food approved hose well suitable for boats and trailers. The cover has good UV-resistance and the inner tube is cadmium free. The design prevents algal bloom in the hose. The hose has a very good bend radius.

Product group: 141


1458-10-08 12.5 17.8 1.0 125 0.15 151458-10-10 15.0 20.8 1.0 150 0.20 15

1404-30 SHARKHOSE, fISH PUmP HOSE

ConstructionInner tube: PVCCover: PVCReinforcement: PCV spiralSafety factor: 3:1Temperature: -25°C – +55°CDesign: Corrugated, transparent

Applications/CharacteristicsA durable and flexible hose with smooth inner tube suitable for pumping up fish. Transpar-ent with a grey PVC spiral. The hose is only delivered in fixed lengths.

Product group: 141

Part ID OD Work pr. Bend rad. Weight Vacuum pr. Length number mm mm MPa mm kg/m Max % m/coil

1404-32-03 203.0 233.0 2.0 600 9.2 95 101404-32-54 254.0 290.0 1.5 1000 14.5 95 101404-33-05 305.0 347.0 1.5 1500 19.0 95 10


1460 vENTILATION HOSE, PvC

ConstructionInner tube: PVCCover: PVCReinforcement: PVC spiralTemperature: -10°C – +60°CDesign: Corrugated, blue

Applications/CharacteristicsA hose for extraction of dust, welding smoke and chimney gas. The hose is suitable as ventilation hose. It can also be used as cable collector and hose protection.

Product group: 146

Part ID Thickness Bend rad. Weight Vacuum pr. Length number mm mm mm kg/m Max % m/coil

1460-00-24 38.0 0.5 50 0.19 3 301460-00-32 51.0 0.5 90 0.29 3 301460-00-40 63.0 0.5 100 0.46 3 301460-00-48 76.0 0.5 110 0.55 3 301460-00-64 102.0 0.5 160 0.75 2 301460-00-96 152.0 0.6 280 1.50 2 20

1460-40 DRY-UP HOSE fOR CONSTRUCTION SITES

ConstructionTube: PETemperature: Max +80°C

Applications/CharacteristicsHot air hose for drying-up applications at constructions sites.

Product group: 148

Part ID Thickness Length number mm mm m/coil

1460-40-96 150.0 0.1 100


1:41460-45 DRY-UP HOSE fOR CONSTRUCTION SITES

ConstructionTube: PETemperature: Max +80°C

Applications/CharacteristicsHot air hose for drying-up applications at constructions sites with hook-up holes.

Product group: 148

Part ID Thickness Length number mm mm m/coil

1460-45-96 150.0 0.3 100

1560-10 DEfROST HOSE, APK

ConstructionInner cover: Glue-covered paperCover: Aluminium foilExternal cover: PP foilTemperature: -20°C – +100°CDesign: Smooth, black

Applications/CharacteristicsA hose suitable for transportation of hot and fresh air in boats and vehicles. It is heat and vibration resistant. Available in dimensions from 24mm up to 200mm.

Product group: 148

Part ID OD Weight Length number mm mm kg/m m/coil

1560-10-32 50.0 55.0 0.13 201560-10-38 55.0 60.0 0.14 201560-10-39 60.0 65.0 0.16 201560-10-51 80.0 85.0 0.21 20


1460-50 vENTILATION HOSE, ALU

ConstructionInner tube: Aluminium laminateCover: PolymerReinforcement: Steel spiralTemperature: -30°C – +140°CDesign: Corrugated, grey

Applications/CharacteristicsA hose suitable for transportation of hot steam, smoke and exhaust gases.

Product group: 148

Part ID Length number mm m/coil

1460-50-64 102.0 101460-50-72 115.0 101460-50-80 127.0 101460-50-88 140.0 101460-50-96 152.0 101460-51-60 160.0 101460-52-03 203.0 101460-52-29 229.0 101460-52-56 254.0 101460-53-05 305.0 101460-53-56 356.0 101460-54-05 406.0 101460-54-57 457.0 101460-55-08 508.0 10

1460-20 vENTILATION AND KITCHEN fAN HOSE

ConstructionInner tube: PVC-covered wowen fiberglassCover: PVC-covered wowen fiberglassReinforcement: PVC-jacketed steel spiralTemperature: -5°C – +90°CDesign: Corrugated, grey

Applications/CharacteristicsThis hose is approved to be used as a kitchen fan hose between the ventilation duct and device. Low-weight and axially compressable. The hose has good resistance towards chemicals and decay. Type approved according to TG certificate number 3432/82.

Product group: 148

Part ID Work pr. Weight Length number mm MPa kg/m m

1460-20-48 76.0 0.06 0.36 61460-20-64 102.0 0.06 0.46 61460-20-80 127.0 0.06 0.56 61460-20-96 152.0 0.06 0.62 61460-21-60 160.0 0.06 0.65 61460-21-78 178.0 0.06 0.80 61460-22-03 203.0 0.06 1.15 61460-22-54 254.0 0.06 1.43 61460-23-05 305.0 0.01 1.70 61460-23-18 318.0 0.01 1.81 61460-25-10 510.0 0.01 2.73 6


1:41561 EXHAUST HOSE fOR HOT AIR, NEOPREN

ConstructionCover: Neoprene, single coated (CR)Reinforcement: Wowen fiberglass, steel spiralTemperature: -50°C – +150°CDesign: Slightly corrugated, black

Applications/CharacteristicsA hose suitable for transportation of hot seams, smoke and exhaust gases. Low-weight and very flexible, good in tight areas. The hose is non-inflammable and has good chemical resistance. Other dimensions are available on request.

Product group: 148

Part ID WP Bend rad. Weight Vacuum pr. Length number mm kPa 23°C mm kg/m kPa 23°C m/coil

1561-00-16 25.0 135 13 0.12 52 4.01561-00-20 32.0 130 16 0.16 52 4.01561-00-29 44.0 120 19 0.21 47 4.01561-00-32 51.0 120 19 0.25 43 4.01561-00-40 63.0 103 25 0.31 43 4.01561-00-48 76.0 103 25 0.42 34 4.01561-00-55 89.0 85 32 0.50 34 4.01561-00-64 102.0 85 32 0.56 26 4.01561-00-80 127.0 68 38 0.80 17 4.01561-00-96 152.0 68 44 1.04 14 4.01561-01-80 180.0 50 51 1.21 10 4.01561-02-03 203.0 50 57 1.39 7 4.01561-02-54 254.0 30 70 2.00 4 4.01561-03-05 305.0 25 83 2.41 3 4.0

1561-10 EXHAUST HOSE fOR HOT AIR, NEOPREN, DOUbLE

ConstructionInner tube: Neoprene (CR)Cover: Neoprene (CR)Reinforcement: Wowen fiberglass, steel spiralTemperature: -50°C – +150°CDesign: Slightly corrugated, black

Applications/CharacteristicsA hose suitable for transportation of hot seams, smoke and exhaust gases. Low-weight and extremely flexible, good in tight areas. The hose is non-inflammable and has good chemical resistance. Other dimensions are available on request.

Product group: 148


1561-10-16 25.0 205 16 0.15 52 4.01561-10-20 32.0 185 20 0.17 52 4.01561-10-29 44.0 170 25 0.26 47 4.01561-10-32 51.0 170 25 0.29 43 4.01561-10-40 63.0 135 32 0.36 34 4.01561-10-48 76.0 135 32 0.46 34 4.01561-10-55 89.0 103 38 0.53 26 4.01561-10-64 102.0 103 38 0.60 26 4.01561-10-80 127.0 68 44 0.86 22 4.01561-10-96 152.0 50 51 1.10 17 4.01561-11-80 180.0 45 64 1.28 10 4.01561-12-03 203.0 30 70 1.43 7 4.0


1562 EXHAUST HOSE fOR HOT AIR, SILICONE

ConstructionCover: Silicone, single coatedReinforcement: Wowen fiberglass, steel spiralTemperature: -50°C – +300°CDesign: Slightly corrugated, red-brown


Product group: 148


1562-00-16 25.0 135 13 0.12 52 4.01562-00-20 32.0 130 16 0.16 52 4.01562-00-29 44.0 120 19 0.21 47 4.01562-00-32 51.0 120 19 0.25 43 4.01562-00-40 63.0 103 25 0.31 43 4.01562-00-48 76.0 103 25 0.42 34 4.01562-00-55 89.0 85 32 0.50 34 4.01562-00-64 102.0 85 32 0.56 26 4.01562-00-80 127.0 68 38 0.80 17 4.01562-00-96 152.0 68 44 1.04 14 4.01562-01-80 180.0 50 51 1.21 10 4.01562-02-03 203.0 50 57 1.39 7 4.01562-02-54 254.0 30 70 2.00 4 4.01562-03-05 305.0 25 83 2.41 3 4.0

1562-10 EXHAUST HOSE fOR HOT AIR, SILICONE, DOUbLE

ConstructionInner tube: SiliconeCover: SiliconeReinforcement: Wowen fiberglass, steel spiralTemperature: -50°C – +300°CDesign: Slightly corrugated, red-brown


Product group: 148


1562-10-16 25 205 16 0.15 52 4.01562-10-20 32 185 20 0.17 52 4.01562-10-29 44 170 25 0.26 47 4.01562-10-32 51 170 25 0.29 43 4.01562-10-40 63 135 32 0.36 34 4.01562-10-48 76 135 32 0.46 34 4.01562-10-55 89 103 38 0.53 26 4.01562-10-64 102 103 38 0.60 26 4.01562-10-80 127 68 44 0.86 22 4.01562-10-96 152 50 51 1.10 17 4.01562-11-80 180 45 64 1.28 10 4.01562-12-03 203 30 70 1.43 7 4.0


1:41461 vENTILATION AND mATERIAL SUCTION HOSE, PvC

ConstructionInner tube: PVCCover: PVCReinforcement: PVC nylon spiralTemperature: -15°C – +60°CDesign: Corrugated, metalic grey

Applications/CharacteristicsA powerful and flexible PVC hose. Smooth internally and will not kink. Suitable as exhaust hose for industrial dusts within all kinds of industries. Especially suitable for industrial vacuum cleaners.

Product group: 148

Part ID OD Vacuum pr. Bend rad. Weight Length number mm mm Max % mm kg/m m/coil

1461-00-12 19.0 21.3 35 20 0.13 601461-00-16 25.0 26.3 35 25 0.18 601461-00-20 32.0 33.3 35 32 0.27 601461-00-24 38.0 39.3 35 38 0.34 301461-00-25 40.0 47.8 35 40 0.36 301461-00-30 45.0 53.4 35 45 0.42 301461-00-32 51.0 51.3 35 51 0.52 301461-00-40 60.0 64.3 35 60 0.64 301461-00-48 76.0 77.3 35 76 0.85 301461-00-64 100.0 103.3 35 102 1.27 301461-00-80 125.0 126.3 35 125 1.70 301461-00-96 150.0 151.3 35 150 2.15 30

1461-30 mATERIAL SUCTION HOSE, SELf-EXTINGUISHING

ConstructionInner tube: PVCCover: PVCReinforcement: PVC spiralTemperature: -10°C – +60°CDesign: Corrugated, grey

Applications/CharacteristicsA flexible, self-extinguishing PVC hose suitable for material suction and ventilation. Self-extinguishing according to UL 94 V2.

Product group: 148

Part ID Vacuum pr. Bend rad. Weight Length number mm Max % mm kg/m m/coil

1461-30-12 20.0 50 20 0.15 501461-30-16 25.0 50 25 0.18 501461-30-20 32.0 50 32 0.24 501461-30-24 38.0 50 38 0.31 501461-30-25 40.0 40 40 0.33 501461-30-30 45.0 40 45 0.37 501461-30-32 50.0 40 50 0.44 501461-30-39 60.0 40 60 0.56 501461-30-40 63.0 40 63 0.60 501461-30-48 75.0 40 75 0.75 501461-30-64 100.0 40 100 1.01 301461-30-80 125.0 40 125 1.36 301461-30-96 150.0 40 150 1.76 30


1560 DUST SUCTION HOSE SD

ConstructionInner tube: PVCCover: PVCReinforcement: Semi-embedded plastic covered steel spiralTemperature: 0°C – +80°CDesign: Corrugated, black, net reinforced with transparent cover

Applications/CharacteristicsA very flexible and low-weight dust suction hose with good resistance to tearing, suitable for the industry. End and seam fittings are available in dimensions 28, 32, 44 and 51 mm.

Product group: 148

Part ID Vacuum pr. Bend rad. Weight Length number mm Max % mm kg/m m/coil

1560-00-16 25.0 93 12 0.20 151560-00-18 28.0 92 12 0.22 151560-00-20 32.0 92 15 0.23 151560-00-24 38.0 81 20 0.30 151560-00-30 44.0 73 20 0.36 151560-00-32 51.0 60 20 0.44 151560-00-40 63.0 43 30 0.52 151560-00-48 76.0 40 35 0.85 15

1461-10 fOOD HOSE, TRANSPARENT

ConstructionInner tube: PVCCover: PVCReinforcement: Steel spiralSafety factor: 3:1Temperature: -5°C – +65°CDesign: Smooth, transparent

Applications/CharacteristicsA hose suitable for transportation of salt water, granualtes, chemicals, grains etc. The hose will sustain high vacuum in all dimensions. Food approved.

Product group: 141


1461-10-06 10.0 16.0 0.70 20 0.16 85 601461-10-08 12.0 18.0 0.70 25 0.18 85 601461-10-10 16.0 22.4 0.60 35 0.25 85 601461-10-12 20.0 26.8 0.50 50 0.34 85 601461-10-16 25.0 33.0 0.50 60 0.51 85 601461-10-19 30.0 38.4 0.45 70 0.60 85 601461-10-20 32.0 40.4 0.45 75 0.65 85 601461-10-24 38.0 47.0 0.40 90 0.80 85 301461-10-30 45.0 55.0 0.30 110 1.10 80 301461-10-32 50.0 60.0 0.30 125 1.20 80 301461-10-39 60.0 72.0 0.20 130 1.80 80 301461-10-40 63.0 74.5 0.60 130 1.80 80 501461-10-48 75.0 88.6 0.20 200 2.50 70 30


1:41461-40 SUCTION AND PRESSURE HOSE, PU/PvC, TRANSPARENT

ConstructionInner tube: Polyurethane (PU)Cover: PVCReinforcement: Steel spiralSafety factor: See table belowTemperature: -20°C – +90°CDesign: Smooth, transparent

Applications/CharacteristicsA powerful and very flexible PVC hose suitable for suction and pressure. It is resistant to hydraulic oils. The hose can also be used to transport dry food. Crystal clear and food ap-proved.

Product group: 143

Part ID OD WP BP BP Bend. rad Weight Vaccum pr. Length number mm mm MPa MPa MPa mm kg/m Max % m 20°C 70°C

1461-40-03 5.0 10.0 2.0 13.0 2.8 20 0.08 90 601461-40-04 6.3 11.3 2.0 12.5 2.6 26 0.10 90 601461-40-05 8.0 13.4 1.8 11.0 2.4 32 0.135 90 601461-40-06 10.0 16.0 1.8 10.5 2.3 40 0.17 90 601461-40-08 12.5 18.7 1.5 8.0 2.0 50 0.23 90 601461-40-10 16.0 23.0 1.4 7.5 1.8 63 0.29 90 601461-40-12 19.0 26.0 1.2 7.2 1.7 76 0.35 90 60

1462 INDUSTRIAL DUST SUCTION HOSE, PE

ConstructionInner tube: Polyethylene (PE)Cover: Polyethylene (PE)Temperature: -30°C – +70°CDesign: Corrugated, grey

Applications/CharacteristicsA flexible hose suitable for suction of dusts and lighter particles in stationary and mobile weld taps, industrial vacuum cleaners and powder separators. The hose can be run over. It is also available in antistatic design, see 1462-10-xx.

Product group: 148


1462-00-16 25.0 32.0 0.08 60 0.25 80 151462-00-20 32.0 40.0 0.08 72 0.27 80 151462-00-24 38.0 48.0 0.08 85 0.37 80 151462-00-32 51.0 62.0 0.07 115 0.48 70 15


1462-10 INDUSTRIAL DUST SUCTION HOSE, PE, ANTISTATIC

ConstructionInner tube: Polyethylene (PE)Cover: Polyethylene (PE)Temperature: -30°C – +70°CDesign: Corrugated, black

Applications/CharacteristicsA flexible hose, with electrical conductor qualities, suitable when there is a risk of a dust explosion. Suitable for hand tools and industrial vacuum cleaners. Cold resistant.

Electrical resistance: 103–106 Ohm/m.

Product group: 148


1462-10-24 38.0 49.0 0.08 85 0.36 80 151462-10-32 51.0 62.0 0.07 115 0.48 70 15

Other dimensions available on request.

1463-10 vACUUm HOSE, POLYURETHANE

ConstructionInner tube: Polyurethane (PU)Cover: Polyurethane (PU)Reinforcement: PVC spiralTemperature: -25°C – +85°CDesign: Corrugated, transparent

Applications/CharacteristicsA hose suitable for ventilation; suction of gases, smoke, dust pellets; and for transporta-tion of mineral wool insulation. The hose is internally smooth and very flexible. Food ap-proved. Also available in antistatic design, see 1463-40-xx.

Product group: 147

Part ID Thickness Bend rad. Weight Vaccum pr. Length number mm mm mm kg/m Max % m/coil

1463-10-20 32.0 0.6 32 0.19 40 201463-10-24 38.0 0.6 38 0.25 30 201463-10-30 45.0 0.6 45 0.32 30 201463-10-32 50.0 0.7 50 0.39 30 201463-10-39 60.0 0.7 60 0.44 30 201463-10-40 63.0 0.7 65 0.47 30 201463-10-48 75.0 0.7 75 0.60 30 201463-10-50 80.0 0.7 80 0.65 30 201463-10-55 90.0 0.8 90 0.75 30 201463-10-34 100.0 0.8 100 0.85 30 201463-10-80 125.0 0.8 125 1.17 30 201463-10-90 150.0 0.9 150 1.45 30 201463-11-60 160.0 0.9 160 1.70 30 20


1:41463-40 vACUUm HOSE, POLYURETHANE, ANTISTATIC

ConstructionInner tube: Polyurethane (PU)Cover: Polyurethane (PU)Reinforcement: PVC spiral with antistatic wireTemperature: -25°C – +85°CDesign: Corrugated, transparent

Applications/CharacteristicsA hose suitable in situations when a grounded braid is needed to transport abrasive ma-terials, mineral wool insulation and ventilation. The hose is made of polyurethane and is very flexible. Food approved.

Product group: 147


1463-40-20 32.0 0.6 32 0.24 40 201463-40-22 35.0 0.6 35 0.25 40 201463-40-24 40.0 0.6 40 0.33 30 201463-40-32 50.0 0.7 50 0.44 30 201463-40-39 60.0 0.7 60 0.50 30 201463-40-40 63.0 0.7 63 0.53 30 201463-40-48 75.0 0.7 75 0.66 30 201463-40-64 100.0 0.8 100 0.92 30 201463-40-80 125.0 0.8 125 1.25 30 201463-40-96 150.0 0.9 150 1.60 30 20

1563-20 POLYURETHANE HOSE L 0.4ConstructionInner tube: Polyurethane (PU)Cover: Polyurethane (PU)Reinforcement: Copper-coloured steel spiralTemperature: -40°C – +90°CDesign: Corrugated, transparent

Applications/CharacteristicsA very light weighted hose delivered in a “compact"-package. The hose is very durable and suitable for the food and pharmaceutical industries. Areas of usage: Ventilation, pellet burner, oil mist. The hose is resistant to hydrolysis and microbes.

Product group: 147


1563-20-32 50.0 0.4 35 0.30 20 61563-20-40 63.0 0.4 42 0.34 15 61563-20-48 76.0 0.4 53 0.43 10 61563-20-50 80.0 0.4 56 0.46 10 61563-20-55 90.0 0.4 62 0.49 10 61563-20-64 100.0 0.4 70 0.51 9 61563-20-70 110.0 0.4 75 0.56 8 61563-20-73 114.0 0.4 78 0.60 8 61563-20-80 125.0 0.4 88 0.65 8 61563-20-96 150.0 0.4 105 0.78 6 61563-21-30 130.0 0.4 90 0.68 7 61563-21-60 160.0 0.4 115 0.81 6 61563-21-80 180.0 0.4 125 0.91 6 61563-22-03 200.0 0.4 140 1.05 5 61563-22-28 228.0 0.4 155 1.13 4 61563-22-54 250.0 0.4 175 1.25 4 61563-23-00 300.0 0.4 218 1.55 3 61563-23-05 305.0 0.4 215 1.57 3 61563-23-18 318.0 0.4 220 1.65 3 61563-23-25 325.0 0.4 230 1.72 2 61563-23-50 350.0 0.4 245 1.81 2 61563-24-08 400.0 0.4 280 2.10 2 6Lengths of 10–15 meters are also available on request.


1563-30 POLYURETHANE HOSE m 0.7

1563-50 POLYURETHANE HOSE H 1.4

ConstructionInner tube: Polyurethane (PU)Cover: Polyurethane (PU)Reinforcement: Copper-coloured steel spiralTemperature: -40°C – +100°CDesign: Corrugated, transparent, internally smooth

Applications/CharacteristicsPowerful and flexible suction hose for transportation of materials such as gravels, cement, sand, sawdust, gasoline, oil products and food. The hose is suitable in areas such as sawmills, plastic and paper industries, wood shaving, contractor businesses. Good resist-ant towards solvents and good aging characteristics. It is also resistant to oil mist and microbes, and can be used in damp environments. Halogen free. (Length 10 m available on request). Product group: 147


Applications/CharacteristicsA very powerful PU-hose for transportation of strong abrasive particles. The hose is suit-able for industrial vacuum cleaning, granulates and splinters. It is also resistant to oil mist and microbes, and can be used in damp environments. Halogen free.

Product group: 147

Part ID Work pr. Bend rad. Weight Vaccum pr. Length number mm Bar mm kg/m Max % m/coil

Part ID Thickness Work pr. Bend rad. Weight Vacuum Length number mm mm Bar mm kg/m Max % m/coil

1563-30-20 32.0 1.25 32 0.35 40 151563-30-24 38.0 1.15 38 0.40 40 151563-30-32 50.0 1.00 50 0.45 25 151563-30-40 63.0 1.00 63 0.48 25 151563-30-48 75.0 0.80 75 0.60 20 151563-30-50 80.0 0.80 80 0.65 20 151563-30-55 90.0 0.70 90 0.73 20 151563-30-64 100.0 0.60 100 0.84 18 151563-30-80 125.0 0.50 125 0.98 15 151563-30-96 150.0 0.40 150 1.12 10 151563-31-40 140.0 0.40 140 1.06 10 151563-31-60 160.0 0.40 160 1.20 8 151563-32-03 200.0 0.25 200 1.50 5 151563-32-54 250.0 0.20 250 1.93 4 151563-33-05 305.0 0.15 300 2.31 2 15

1563-50-32 50.0 1.4 1.9 75 0.67 60 101563-50-40 63.0 1.4 1.8 90 0.79 55 101563-50-48 76.0 1.4 1.2 113 0.98 50 101563-50-64 100.0 1.4 1.1 150 1.36 40 101563-50-76 120.0 1.4 0.9 180 1.42 30 101563-50-80 127.0 1.4 0.8 185 1.54 25 101563-50-85 140.0 1.4 0.7 210 1.75 20 101563-50-96 150.0 1.4 0.7 225 1.82 20 10


1:41563-70 POLYURETHANE HOSE HD T 2.0


Applications/CharacteristicsAn extremely powerful PU-hose for both suction and pressure transports of abrasive materials such as sand, granulates and splinters. The hose is suitable in the contractor business area, the wood and plastic industries. It is food approved and sustains oil mist. It is also resistant towards microbes and can be used in damp environments.

Product group: 147

Part ID Thickness Work pr. Bend rad. Vacuum Weight Length number mm mm Bar mm Max % kg/m m/coil

1563-70-25 40.0 2.0 4.2 160 0.90 0.76 101563-70-32 50.0 2.0 3.8 200 0.95 1.00 101563-70-48 76.0 2.0 2.7 300 0.95 1.51 101563-70-64 100.0 2.0 1.9 400 0.95 2.13 10


1464-00-08 13.0 25.0 1.0 200 0.48 401464-00-12 19.0 33.0 1.0 230 0.75 401464-00-16 25.0 39.0 1.0 300 0.94 401464-00-20 32.0 48.0 1.0 380 1.24 401464-00-24 38.0 58.0 1.0 460 1.85 401464-00-26 40.0 60.0 1.0 480 1.92 401464-00-30 45.0 65.0 1.0 540 2.00 401464-00-32 50.0 72.0 1.0 600 2.66 401464-00-52 80.0 105.0 1.0 960 4.57 40

1464 SANDSTONE, bLASTING HOSE, 10 bAR

ConstructionInner tube: Abrasion resistant rubber (NR/BR)Cover: Synthetic abrasion and weather resistant rubber (SBR)Reinforcement: Synthetic textileSafety factor: 4:1Temperature: -30°C – +70°CDesign: Wrapped, black

Applications/CharacteristicsA hose suitable for sand or steel sand blasting. It can also be used for concrete cast, and as transportation/deliverance of abrasive particles. According to the latest European norm EN IOS 3861.

Product group: 147



Part ID OD Work pr. Bend rad. Weight number mm mm MPa mm kg/m

1464-10-12 19.0 31.0 4.0 120 0.60 401464-10-16 25.0 37.0 4.0 160 0.82 401464-10-20 32.0 44.0 4.0 220 1.08 401464-10-22 35.0 49.0 4.0 250 1.18 401464-10-24 38.0 54.0 4.0 300 1.42 401464-10-32 51.0 68.0 4.0 400 2.02 401464-10-40 63.5 85.0 4.0 500 2.94 401464-10-48 76.0 98.0 4.0 600 3.78 401464-10-64 100.0 128.0 4.0 750 6.10 40

1464-50-32 51.0 75.0 8.0 380 3.961464-50-40 65.0 89.0 8.0 400 4.841464-50-48 76.0 104.0 8.0 400 6.211464-50-64 100.0 128.0 8.0 550 9.671464-50-80 125.0 153.0 8.0 700 15.16

1464-10 mARbLE, CONCRETE CAST HOSE, 40 bAR

1464-50 SHALE, CONCRETE PUmP HOSE, 80 bAR

ConstructionInner tube: Abrasion resistant rubber (NR/BR)Cover: Synthetic abrasion and weather resistant rubber (SBR)Reinforcement: Synthetic textileSafety factor: 3:1Temperature: -40°C – +70°CDesign: Wrapped, black

Applications/CharacteristicsA hose suitable for wet-casting of concrete mixtures at mobile or stationary applications. Also excellent to use as transportation hose between pump and nozzle (for pre-mixed concrete). The thick tube prevents kink in the hose.

Product group: 147

ConstructionInner tube: NR/SBRCover: NR/SBRReinforcement: Steel spiralTemperature: -40°C – +70°CDesign: Wrapped, black

Applications/CharacteristicsA hose suitable for placing and transporting concrete from beam. The very robust design prevents kink in the hose and makes it easy to use as well as flexible. It sustains high pressures. Deliverance usually fully assembled with fluid connectors.

The pre-assembling is done in-house in Sweden.

Product group: 147


1:4



1465-30-48 76.0 92.0 0.6 2.75 401465-30-56 90.0 106.0 0.6 2.96 401465-30-64 102.0 119.0 0.6 3.36 401465-30-80 127.0 145.0 0.6 4.20 401465-30-96 152.0 170.0 0.6 5.05 40

1565-00-64 100.0 108.0 0.6 1.45 401565-00-80 125.0 134.0 0.5 2.10 401565-00-96 150.0 160.0 0.4 2.75 20

1465-30 LImESTONE, CONCRETE AND GRANULATE HOSE, 6 bAR

1565 CHLORIET, mATERIAL HOSE, LAY-fLAT

ConstructionInner tube: Durable, antistatic rubber (NR/SBR)Cover: Abrasion, weather and ozone resistant rubberReinforcement: Synthetic textileSafety factor: 3:1Temperature: -40°C – +70°CDesign: Wrapped, black

Applications/CharacteristicsA very robust and durable hose suitable for transportation of concrete, sand, gravel, ani-mal feed and granulates. Can also be used in pneumatic applications between trucks and silos.

Product group: 147

ConstructionInner tube: Abrasion resistant rubber (NR/BR)Cover: Abrasion and weather resistant rubber (SBR)Reinforcement: Synthetic textileSafety factor: 3:1Temperature: -35°C – +80°CDesign: Wrapped, black

Applications/CharacteristicsAn all-round clearing hose with an abrasion resistent inner tube. It is suitable for trans-portation of wet and dry concrete, sand or gravel. Electrical resistance: <106 Ohm. Can be stored lay-flat.

Product group: 147


1466 DOLmITE, INDUSTRIAL DUST SUCTION HOSE

1467-45 SLATE, SANITATION SUCTION HOSE, m45

ConstructionInner tube: Abrasion resistant rubberCover: Durable, weather resistant rubberReinforcement: Wowen polyester and a steel spiralTemperature: -40°C – +90°CDesign: Corrugated, black

Applications/CharacteristicsA exhaust hose suitable for particles, sand, dust and powder within the engineering indus-try. Can also be used as exhaust hose for grains. Available with cable heads.

Product group: 147

ConstructionInner tube: Abrasion resistant rubber (NR)Cover: Durable, weather resistant rubber (SBR)Reinforcement: Synthetic textile and a steel spiralTemperature: -40°C – +70°CDesign: Corrugated, black

Applications/CharacteristicsAn elastic and flexible hose suitable for sanitation vehicles. The hose is designed for nor-mal abrasion situations. It is only available in fixed lengths.

Product group: 147

Part ID OD Bend rad. Weight Vaccum pr. Length number mm mm mm kg/m Max % m/coil

Part ID Thickness ID Bend rad. Weight Vaccum pr. Length number mm mm mm kg/m Max % m/coil

1466-00-24 38.0 44.0 70 0.55 80 201466-00-32 50.0 56.0 75 0.71 80 201466-00-40 60.0 66.0 100 0.85 80 201466-00-42 63.0 70.0 105 0.97 80 201466-00-48 76.0 83.0 120 1.25 80 101466-00-64 102.0 110.0 150 1.90 80 101466-00-70 110.0 118.0 160 2.05 80 101466-00-80 127.0 135.0 175 2.35 80 101466-00-96 152.0 162.0 200 2.52 80 101466-02-02 202.0 211.0 203 3.04 80 101466-02-20 220.0 230.0 220 3.39 80 10

1467-45-48 76.0 3.2 300 1.9 80 121467-45-64 102.0 3.2 410 2.8 80 121467-45-80 127.0 3.2 510 3.4 80 121467-45-96 152.0 3.2 600 4.3 80 121467-45-03 203.0 3.2 800 7.9 80 12


1:41467-51 COAL, SANITATION SUCTION HOSE, m51

1467-52 GRANULITE, TRANSPORTATION HOSE m52


Applications/CharacteristicsAn elastic and flexible hose suitable for sanitation vehicles. The hose is designed for heavy abrasion situations. It is only available in fixed lengths.

Product group: 147

ConstructionInner tube: Abrasion resistant rubber (NR)Cover: Abrasion, ozone and weather resistant rubber (SBR)Reinforcement: Synthetic textile and a steel spiralTemperature: -40°C – +70°CDesign: Wrapped, black

Applications/CharacteristicsTransportation hose for sanitation vehicles. Can also be used as the bent part in central vacuum applications.

Product group: 147


Part ID OD Bend rad. Weight Vaccum pr. Length number mm mm mm kg/m Max % m/coil

1467-51-64 102.0 4.0 510 3.4 80 121467-51-80 127.0 4.0 640 4.1 80 121467-51-96 152.0 4.0 760 4.9 80 121467-51-03 203.0 4.0 1,000 8.6 80 12

1467-52-32 50.0 63.0 300 1.8 80 401467-52-40 63.0 76.0 380 2.3 80 401467-52-48 76.0 89.0 460 2.7 80 401467-52-56 90.0 103.0 540 3.3 80 401467-52-64 102.0 116.0 600 4.2 80 401467-52-69 108.0 122.0 650 4.5 80 401467-52-74 116.0 131.0 450 4.6 80 401467-52-80 127.0 142.0 760 5.4 80 401467-52-85 140.0 156.0 840 6.6 80 401467-52-96 152.0 168.0 900 7.2 80 401467-52-03 203.0 223.0 1,200 13.4 80 20


1567 GNEISS, SANITATION SUCTION HOSE

1468 mATERIAL HOSE PvC/PU


Applications/CharacteristicsA hose suitable as a work hose in industrial central vacuum cleaner applications. It is also suitable as main line in buildings. The hose can have a ground connection through the embedded steel spiral.

Product group: 147

ConstructionInner tube: Polyurethane (PU)Cover: PVCReinforcement: PVC spiralSafety factor: 3:1Temperature: -25°C – +55°CDesign: Corrugated, yellow and grey

Applications/CharacteristicsA suction and pressure hose for heavy abrasion . The inner tube of polyurethane makes the hose suitable for concrete, granulates and other abrasive materials.

Product group: 147


1567-00-32 50 2.0 150 1.15 90 401567-00-40 63 2.0 160 1.43 90 401567-00-48 76 2.0 170 1.74 90 401567-00-56 90 2.0 200 2.45 90 401567-00-64 102 2.0 210 2.95 90 401567-00-74 115 2.0 220 3.23 90 201567-00-80 127 2.0 250 3.60 90 201567-00-96 152 2.0 370 4.40 90 20


1468-00-20 32.0 41.0 0.60 130 0.60 70 501468-00-24 38.0 47.0 0.60 150 0.70 70 501468-00-30 45.0 55.0 0.55 180 0.90 70 501468-00-32 50.0 61.0 0.50 200 1.05 70 501468-00-40 63.0 74.0 0.45 250 1.39 70 501468-00-48 76.0 89.0 0.40 300 1.70 70 301468-00-55 89.0 103.0 0.35 360 2.25 70 301468-00-64 102.0 117.0 0.30 400 2.70 70 301468-00-80 127.0 144.0 0.25 510 3.90 70 20


1:41480 GAS EXHAUST HOSE, STAINLESS STEEL

ConstructionMaterial: Stainless steel 1.4301 EN 10088-1 (AISI 304)Temperature: Up to +800°CDesign: Corrugated

Applications/CharacteristicsSpiral wired gas exhaust hose for transportation of dry gases, hot air and smoke. The hose is also suitable for transportation of abrasive particles such as splinters, powder and pellets. Can also be used as mechanical cable protection.

HYDROSCAND mETAL HOSESHydroscand offers a wide range of solutions with different metal hoses, exhaust gas hoses as well as pressure hoses with parallel and spiral wraps.

Hydroscand’s metal hoses are suitable for transportation of gases, hot and cold fluids, and as vibration recovery in pipe lines.

Hydroscand’s metal hoses are manufactured according to customer requirements and can be delivered with certifications of pressure and seal controls.

Contact us for more information:

HYDROSCAND SPECIAL HOSESMyntgatan 1 Phone: +46 141 507 40 S-591 61 Motala, Sweden Fax: +46 141 528 80 E-mail: [email protected]

Part ID OD Bend rad. number mm mm mm

1480-00-12 20.0 24.8 701480-00-14 22.0 26.0 771480-00-16 25.0 29.8 861480-00-19 30.0 34.8 1011480-00-20 32.0 36.0 1601480-00-22 35.0 39.0 1701480-00-24 38.0 42.0 1901480-00-25 40.0 44.5 2001480-00-26 42.0 46.5 2101480-00-30 45.0 49.5 2251480-00-32 50.0 54.5 2501480-00-38 55.0 59.5 2651480-00-39 60.0 64.5 2751480-00-40 65.0 69.5 2851480-00-44 70.0 74.5 3001480-00-48 75.0 79.5 3101480-00-51 80.0 84.5 3201480-00-53 85.0 89.5 3351480-00-56 90.0 94.5 3451480-00-62 100.0 105.0 3751480-00-64 102.0 107.0 3801480-00-68 105.0 110.0 3901480-00-70 110.0 115.0 4001480-00-74 115.0 120.0 4251480-00-79 125.0 130.0 4351480-00-80 127.0 132.0 4451480-00-82 130.0 135.0 4501480-00-85 140.0 145.0 4751480-00-96 150.0 155.0 5001480-01-75 175.0 180.0 5601480-01-90 190.0 195.0 5951480-02-00 200.0 205.0 620



1484 mETAL HOSE, PARALLEL WRAPPED

1485 mETAL HOSE, TIGHT AND PARALLEL WRAPPED

ConstructionInner tube: Stainless steel 1.4541 EN 10088-1 (AISI 321) Suffix F Stainless steel 1.4404 EN 10088-1 (AISI 316L) Suffix SWrapping: Stainless steel 1.4301 EN 10088-1 (AISI 304)Safety factor: 4:1Temperature: -200°C – +550°C

Applications/CharacteristicsMetal hose suitable for hot oils, chemicals, gases, exhaust gases, water, steam, vacuum etc. The hose can also be used as mechanical cable protection.

ConstructionInner tube: Stainless steel 1.4541 EN 10088-1 (AISI 321) Wrapping: Stainless steel 1.4301 EN 10088-1 (AISI 304Safety factor: 4:1Temperature: -200°C – +550°C

Applications/CharacteristicsMetal hose suitable for hot oils, chemicals, gases, exhaust gases, water, steam, vacuum etc. The hose can also be used as mechanical cable protection. Extra flexible.



1484-01-06F/S 10.6 17.5 7.50 190 0.251484-01-08F/S 12.3 19.5 7.00 210 0.291484-01-10F/S 15.7 25.2 6.50 285 0.371484-01-12F/S 19.8 30.3 5.00 310 0.501484-01-16F/S 25.8 36.0 4.00 375 0.641484-01-20F/S 33.0 45.7 3.50 405 1.001484-01-24F/S 40.0 54.0 3.00 480 1.201484-01-32F/S 51.6 67.5 2.50 550 1.541484-01-40F/S 66.0 87.9 2.00 675 2.551484-01-48F/S 76.6 100.0 1.80 750 2.901484-01-64F/S 103.0 128.0 1.40 920 4.201484-01-80F/S 127.5 154.5 1.25 1160 5.801484-01-96F/S 151.5 180.0 1.00 1320 6.801484-01-128F/S 200.0 232.0 0.60 1400 11.00

1485-01-24F 38.9 54.5 3.00 400 1.31485-01-32F 51.6 68.0 2.50 450 1.71485-01-40F 65.5 88.5 2.00 540 3.01485-01-48F 76.0 100.7 1.80 640 3.41485-01-64F 102.5 128.0 1.40 840 4.51485-01-80F 127.5 154.5 1.25 950 6.51485-01-96F 151.5 180.5 1.00 1,150 7.7


1:41489 mETAL HOSE, PARALLEL WRAPPED, mECHANICALLY SHAPED

1481 mINIWAvE, mETAL HOSE, PARALLEL WRAPPED

ConstructionInner tube: Stainless steel 1.4401 EN 10088-1 (AISI 316L) Wrapping: Stainless steel 1.4301 EN 10088-1 (AISI 304)Safety factor: 4:1Temperature: -200°C – +550°C

Applications/CharacteristicsMetal hose suitable for oils, chemicals, gases, exhaust gases, water, steam, vacuum etc. The hose can also be used as mechanical cable protection.

1489-01-xxS = simple wrap 1489-02-xxS = double wrap

ConstructionInner tube: Stainless steel 1.4541 EN 10088-1 (AISI 321)Wrapping: Stainless steel 1.4301 EN 10088-1 (AISI 304)Safety factor: 4:1Temperature: -200°C – +550°C

Applications/CharacteristicsMetal hose suitable for hot oils, chemicals, gases, vacuum etc. Low-weight.



1489-01-04S 6.3 11.1 15.0 80.0 0.1731489-02-04S 6.3 12.3 22.0 80.0 0.2271489-01-05S 8.2 13.7 13.5 125.0 0.2191489-02-05S 8.2 14.9 20.0 125.0 0.3571489-01-06S 10.3 15.7 8.5 130.0 0.2391489-02-06S 10.3 16.9 15.0 130.0 0.380

1481-01-12F 20.0 26.8 5.0 285 0.401481-01-16F 25.8 33.1 4.0 325 0.531481-01-20F 33.0 42.2 3.5 380 0.801481-01-24F 40.1 50.2 3.0 430 1.041481-01-32F 51.7 62.9 2.5 490 1.30


1494 mETAL HOSE, SPIRAL WRAPPED

THE HYDROSCAND mETAL HOSE PROGRAmmE: TYPE Of WRAPPING

ConstructionInner tube: Stainless steel 1.4541 EN 10088-1 (AISI 321) Wrapping: Stainless steel 1.4301 EN 10088-1 (AISI 304) Safety factor: 4:1Temperature: -200°C – +550°C

Applications/CharacteristicsMetal hose suitable for oils, chemicals, gases, exhaust gases, water, steam, vacuum etc. The hose can also be used as mechanical cable protection. Extra flexible


1494-01-04F 6.3 11.5 12.5 105 0.1601494-01-05F 8.3 13.5 10.0 115 0.1851494-01-06F 10.3 15.5 8.0 130 0.2251494-01-08F 12.4 18.5 6.4 150 0.2901494-01-10F 16.4 23.0 6.4 190 0.3501494-01-12F 20.6 27.5 5.0 240 0.4951494-01-16F 25.6 32.5 4.0 300 0.575

Wrap type Application areas MaterialMax

tempDim. area

Max pressure

(BAR)

Vibration reducers, load and unload hoses, steam, ag-gressive fluids, chemicals, gas and exhaust gas.

Stainless steel AISI 321

800°C 10–250 75 *

Stainless steel AISI 316L

450°C 10–250 75 *

Same application areas as above, but when there are high demands of flexibility and small bend radius.

Stainless steelAISI 321

800°C 6–150 125*

Stainless steelAISI 316L

450°C 6–150 –

Vibration reducers for ex-haust gas applications with no absolute demand for total dense.

Stainless steelAISI 321

800°C 8–250 –

Galvanized design

400°C 8–500 –

* With two braids, a higher working pressure can be achieved.


1:4THE HYDROSCAND mETAL HOSE PROGRAmmE: ASSEmbLED fITTINGS

HYDROSCAND Special Hoses can also deliver metal hoses pre-assembled with (welded) fittings. Please contact us for further information.

Fittings Material

BrassSteelStainless steel

BrassSteel Stainless steel

BrassSteel Stainless steel

MalleableBrassSteelStainless steel

MalleableBrassSteelStainless steel

SteelStainless steel

SteelStainless steelAluminium

BrassSteelStainless steel

BrassStainless steel

PARALLEL WRAPPED METAL HOSES

Dim inch ID mm OD mmWork pr.

BarBend

rad. mm

3/8" 10.6 17.5 75.0 190

1/2" 12.9 20.8 70.0 210

5/8" 15.7 25.2 65.0 285

3/4" 19.8 30.3 50.0 310

1" 25.9 38.0 40.0 375

1 1/4" 33.0 45.7 35.0 405

1 1/2" 40.0 54.3 30.0 480

2" 51.6 67.5 25.0 550

2 1/2" 66.0 87.9 20.0 675

3" 76.6 100.0 18.0 750

4" 103.0 128.0 14.0 920

5" 127.5 154.5 12.5 1,160

6" 151.5 180.0 10.0 1,320

Solid, male thread

Loose nut and cone sealing 60°

Welded standpipe

CAM-LOCK fitting

Three part, male thread

Solid flange

Loose flange Welded ring with cripmed nut

Three part, female thread

Angular, with loose nut and cone sealing 60°

HYDROSCAND mETAL HOSESHydroscand offers a wide range of solutions with different metal hoses, exhaust gas hoses as well as pressure hoses with parallel and spiral wraps.

Hydroscand’s metal hoses are suitable for transpor-tation of gases, hot and cold fluids, and as vibration recovery in pipe lines.

Hydroscand’s metal hoses are manufactured accord-ing to customer requirements and can be delivered with certifications of pressure and seal controls.

Contact us for more information:

HYDROSCAND SPECIAL HOSESMyntgatan 1 S-591 61 Motala, Sweden

Phone: +46 141 507 40 Fax: +46 141 528 80

E-mail: [email protected]


HYDROSCAND’S INTRODUCTION Of THE NEXT GENERATION Of SURfACE TREATmENT

THE NEXT GENERATION Of SURfACE TREATmENT IS HERE!Technical development, new legislation and an increased environmental commitment sometimes go hand in hand in a very positive way. A good evidence of this was when Hydroscand during 2006 started the introduction of more environmentally friendly surface treatments. The transition is now finished to 85–90%.

Many years of research and major changes within the surface treatment industry have made it possible to replace CRVI, which is a well-known carcinogenic and mutagenic substance. The development is an important step towards future EU-directives stating that CRVI in pacification and corrosion protection has to be replaced.

It is very important for our suppliers’ staff that CRVI is phased out from the surface treatment process, since it affects their health. We at Hydroscand find it very gratifying to be able to contribute to a better working environment and less negative health effects.

It is also gratifying to see that the technical development keeps moving forward. The understanding of how thick surfaces can be created even with CRIII-solutions is increasing day by day. A couple of years ago it was not possible, but now salt spray tests (according to ISO 9227) on scraped details show not only that the development of the last version has made huge progress, but also that it has created an performance equally good to the previous one.

EvERYONE IS A WINNER Of ENvIRONmENTALLY fRIENDLY SURfACE TREATmENT!There is a strong environmental commitment at Hydroscand, at our customers and at our suppliers. And together we have reached this success by long-term environmental work and by helping each other. This process-transition means that Hydroscand with CRIII in our fittings will contribute to less negative health effects, a better working environment and a better global environment. Everyone is a winner with this transition! We at Hydroscand never doubted this change since it is a way for us to achieve important health and environmental gains without renouncing our requirements on safety and quality.


1:9

Table of contentsHydroscand Pipes

Product group 610/625/519

Pipes to suit a wide spectra of materials for all sorts of applica-tions in hydraulic and pneumatic systems.

NOTE! Seamless stainless steel pipes can in some applications be replaced by welded stainless steel pipes. The customer deci-des in what application the seamless pipe can be replaced by a welded one. The manufacturer guarantees a weldfactor of V=1,0.In the pneumatic catalogue You can fi nd information about plastic pipes.

1900 Steel pipe 941902 Steel pipe - Crome yellow 951920 Steel pipe - Stainless 961921 Steel pipe - Stainless steel 961922 Steel pipe - Stainless, welded 96

Pipes Page


PIPE PRODUCT GROUP 610

1900-22-10 22 1,0 12,5 0,521900-22-15 22 1,5 19,2 0,761900-22-20 22 2,0 26,2 0,991900-22-25 22 2,5 33,5 1,201900-25-15 25 1,5 16,8 0,871900-25-20 25 2,0 22,8 1,131900-25-25 25 2,5 29,1 1,391900-25-30 25 3,0 35,6 1,631900-25-40 25 4,0 49,5 2,071900-28-15 28 1,5 14,9 0,981900-28-20 28 2,0 20,2 1,281900-28-30 28 3,0 31,4 1,851900-28-40 28 4,0 43,4 2,371900-30-20 30 2,0 18,8 1,381900-30-30 30 3,0 29,1 2,001900-30-40 30 4,0 40,1 2,571900-30-50 30 5,0 51,9 3,081900-35-20 35 2,0 15,9 1,631900-35-30 35 3,0 24,6 2,371900-35-40 35 4,0 33,7 3,061900-35-50 35 5,0 43,4 3,701900-38-30 38 3,0 22,5 2,591900-38-40 38 4,0 30,8 3,351900-38-50 38 5,0 39,5 4,071900-38-60 38 6,0 48,7 4,741900-42-20 42 2,0 13,2 1,971900-42-30 42 3,0 20,2 2,891900-50-60 50 6,0 35,6 6,511900-65-80 65 8,0 36,6 11,24

1900-06-10 6 1,0 48,5 0,121900-06-15 6 1,5 70,7 0,171900-08-10 8 1,0 35,0 0,171900-08-15 8 1,5 56,0 0,241900-08-20 8 2,0 70,4 0,301900-10-10 10 1,0 29,1 0,221900-10-15 10 1,5 45,9 0,311900-10-20 10 2,0 63,0 0,401900-12-10 12 1,0 23,8 0,271900-12-15 12 1,5 37,3 0,391900-12-20 12 2,0 51,9 0,491900-12-25 12 2,5 65,4 0,591900-14-20 14 2,0 43,4 0,591900-14-25 14 2,5 56,3 0,711900-15-10 15 1,0 18,8 0,351900-15-15 15 1,5 22,3 0,501900-15-20 15 2,0 40,1 0,641900-16-15 16 1,5 27,1 0,541900-16-20 16 2,0 37,3 0,691900-16-25 16 2,5 48,1 0,831900-16-30 16 3,0 59,7 0,961900-18-15 18 1,5 23,8 0,611900-18-20 18 2,0 32,7 0,791900-18-25 18 2,5 42,0 0,961900-18-30 18 3,0 51,9 1,111900-20-15 20 1,5 21,3 0,681900-20-20 20 2,0 29,1 0,891900-20-25 20 2,5 37,3 1,081900-20-30 20 3,0 45,9 1,261900-20-40 20 4,0 63,0 1,58

1900STEEL PIPE

Equivalent to pipe line directives 1978Material: ST 37,4

OD Thickness PN WeightPart nr (mm) (mm) (MPa) (Kg/m)


NOTE!

Note the recomended pressure range for use of cutting rings (see pressure range cutting rings)

Max. allowed working pressure in MPa according pipe standards 1978.NOTE! Values are based on static, smooth and resting load. For dyna-mic, pulsating load the values should be reduced with 30%.


PRODUCT GROUP 610 PIPE

1:9

1902-22-15 22 1,5 19,2 0,761902-22-20 22 2,0 26,2 0,991902-22-25 22 2,5 33,5 1,201902-25-25 25 2,5 29,1 1,391902-25-30 25 3,0 35,6 1,631902-28-20 28 2,0 20,2 1,281902-28-25 28 2,5 25,7 1,571902-28-30 28 3,0 31,4 1,851902-30-30 30 3,0 29,1 2,001902-30-40 30 4,0 40,1 2,571902-35-20 35 2,0 15,9 1,631902-35-30 35 3,0 24,6 2,371902-38-30 38 3,0 22,5 2,991902-38-40 38 4,0 30,8 3,351902-38-50 38 5,0 39,5 4,071902-42-30 42 3,0 20,2 2,891902-50-50 50 5,0 29,1 5,551902-50-60 50 6,0 35,6 6,51

1902-06-10 6 1,0 48,5 0,121902-06-15 6 1,5 70,7 0,171902-08-10 8 1,0 35,0 0,171902-08-15 8 1,5 56,0 0,241902-10-10 10 1,0 29,1 0,221902-10-15 10 1,5 45,9 0,311902-10-20 10 2,0 63,0 0,401902-12-10 12 1,0 23,8 0,271902-12-15 12 1,5 37,3 0,391902-12-20 12 2,0 51,9 0,491902-14-20 14 2,0 43,4 0,591902-15-10 15 1,0 18,8 0,351902-15-15 15 1,5 22,3 0,501902-15-20 15 2,0 40,1 0,641902-16-20 16 2,0 37,3 0,691902-18-15 18 1,5 23,8 0,611902-18-20 18 2,0 32,7 0,791902-20-20 20 2,0 29,1 0,881902-20-25 20 2,5 37,3 1,081902-20-30 20 3,0 45,9 1,26

1902STEEL PIPE

YELLOW CROMATEDEquivalent to pipe line directives 1978

Material: ST 37,4Equivalent to DIN 2391/C



NOTE! Note the recomended pressure range for use of cutting rings (see pressure range cutting rings)

Max. allowed working pressure in MPa according pipe standards 1978.NOTE! Values are based on static, smooth and resting load. For dynamic, pulsating load the values should be reduced with 30%.


PIPES PRODUCT GROUP 625

1921-06-10 6 1,0 49,0 0,131921-08-10 8 1,0 36,7 0,181921-10-10 10 1,0 29,4 0,231921-12-15 12 1,5 36,7 0,391921-15-15 15 1,5 29,4 0,511921-16-20 16 2,0 39,2 0,701921-18-15 18 1,5 24,5 0,621921-22-20 22 2,0 26,7 1,00


1920-06-10 6 1,0 46,0 0,121920-08-10 8 1,0 34,5 0,181920-08-15 8 1,5 51,8 0,241920-10-10 10 1,0 27,6 0,221920-10-15 10 1,5 41,4 0,321920-10-20 10 2,0 55,2 0,401920-12-10 12 1,0 23,0 0,281920-12-15 12 1,5 34,5 0,391920-12-20 12 2,0 48,0 0,501920-15-15 15 1,5 27,6 0,511920-15-20 15 2,0 38,8 0,651920-16-15 16 1,5 25,9 0,551920-16-20 16 2,0 34,5 0,701920-18-20 18 2,0 30,7 0,801920-20-15 20 1,5 20,7 0,701920-20-20 20 2,0 27,6 0,901920-20-25 20 2,5 34,5 1,011920-22-20 22 2,0 25,1 1,00


NOTE! Note the recommended pressure range for use of cutting rings (see pressure class cutting rings)

1922-06-10 6 1,0 0,121922-08-10 8 1,0 0,181922-10-10 10 1,0 0,221922-12-10 12 1,0 0,281922-12-15 12 1,5 0,391922-15-15 15 1,5 0,511922-16-20 16 2,0 0,701922-20-20 20 2,0 0,901922-22-20 22 2,0 1,00


1922STAINLESS STEEL PIPE

WELDEDEquivalent to DIN 17455, Weld factor V=1,0

Material: SS 2333

1920STAINLESSSTEEL PIPE

Equivalent to DIN 2462Material: SS 2333

1921STEEL PIPE

STAINLESS STEELEquivalent to DIN 2462

Material: SS 2353


22000-01 Ferrule R1 982000-02 Ferrule R2 982000-03 Ferrule R1 AT 982000-04 Ferrule R2 AT 98

2001 G-threaded female fl exible 982002 G-threaded male fi xed 982003 G-threaded female fl exible 90° 992004 G-threaded female fl exible 45° 992005 G-threaded female fl exible 90T 992006 G-threaded female fl exible 45T 992009 G-threaded female fl exible fl at face 99

2013 J-threaded female fl exible 992014 J-threaded male fi xed 1002016 J-threaded female fl exible 90° 100

2020 M-threaded male fi xed for cutting ring MLM 1002023 M-threaded male fi xed for cutting ring MSM 1002033 M-threaded female fl exible DKLO 1012034 M-threaded female fl exible 90° DKLO 1012035 M-threaded female fl exible 45° DKLO 1012036 M-threaded female fl exible DKSO 101

2026 Stand pipe 1002027 Stand pipe 90° 1002028 Stand pipe 45° 100

2039 R-threaded male fi xed 101

2081 G-threaded (BSP) Banjo 1012082 G-threaded (BSP) Banjo bolt 101

Table Of ContentsHydroscand Reusable Fittings

Ferrule Page

Product group 200

G-threaded fi ttings Page

J-Unifi ed threaded fi ttings Page

M-thread fi ttings Page

Stand pipe Page

Banjo fi ttings Page

Hydroscand reserves the right to modify any or all part of this catalogue without prior notice.

Reusable fi ttings are only suitable for steel braided hoses, type R1 and R2.

Ferrules for both skive and non skive assemblies are avaliable. All fi ttings in stock have dimensions 1/4" to 1".

Reusable fi ttings are recomended for hydraulic applications with moderate pressure where there is a need of assembling hose lines without equipment.

Follow the assembling instructions on page 100.

Cone fi ttings Page


REUSABLE FITTINGS PRODUCT GROUP 200

2000-01-04 EN1SN 1/4"2000-01-06 EN1SN 3/8"2000-01-08 EN1SN 1/2"2000-01-12 EN1SN 3/4"2000-01-16 EN1SN 1"

Part nr Used with Hose i.d.

2000-01

FERRULE R1Non skive

Part nr For use with Hose i.d.

2000-02

FERRULE R2Skive


2000-03

FERRULE R1ATNon skive

2000-04-04 EN2SN 1/4"2000-04-06 EN2SN 3/8"2000-04-08 EN2SN 1/2"2000-04-10 EN2SN 5/8"2000-04-12 EN2SN 3/4"2000-04-16 EN2SN 1"


2000-04

FERRULE R2 ATNon skive

2001-04-04 G 1/4" FS 1/4"2001-06-06 G 3/8" FS 3/8"2001-08-06 G 1/2" FS 3/8"2001-08-08 G 1/2" FS 1/2"2001-10-10 G 5/8" FS 5/8"2001-12-12 G 3/4" FS 3/4"2001-16-12 G 1" FS 3/4" #2001-16-16 G 1" FS 1"

Part nr Thread Type Hose i.d.

2001

G FS60°cone sealing

2002-04-04 G 1/4" M 1/4"2002-06-04 G 3/8" M 1/4" #2002-06-06 G 3/8" M 3/8"2002-06-08 G 3/8" M 1/2" #2002-08-06 G 1/2" M 3/8"2002-08-08 G 1/2" M 1/2"2002-10-10 G 5/8" M 5/8"2002-12-12 G 3/4" M 3/4"2002-16-16 G 1" M 1"


2002

G M60°cone sealing



# = In stock.


PRODUCT GROUP 200 REUSABLE FITTINGS

22003-04-04 G 1/4" 90° 1/4"2003-06-06 G 3/8" 90° 3/8"2003-08-08 G 1/2" 90° 1/2"2003-10-10 G 5/8" 90° 5/8"2003-12-12 G 3/4" 90° 3/4"2003-16-16 G 1" 90° 1"

2006-04-04 G 1/4" 45T 1/4" #2006-06-06 G 3/8" 45T 3/8" #2006-08-08 G 1/2" 45T 1/2" #2006-12-12 G 3/4" 45T 3/4" #2006-16-16 G 1" 45T 1" #


2006

G 45T60°cone sealing

2003

G 90°60°cone sealing


2004-04-04 G 1/4" 45° 1/4"2004-06-06 G 3/8" 45° 3/8"2004-08-08 G 1/2" 45° 1/2"2004-10-10 G 5/8" 45° 5/8"2004-12-12 G 3/4" 45° 3/4"2004-16-16 G 1" 45° 1"


2004

G 45°60°cone sealing


2005

G 90T60°cone sealing

2005-04-04 G 1/4" 90T 1/4" #2005-06-06 G 3/8" 90T 3/8" #2005-08-08 G 1/2" 90T 1/2" #2005-10-10 G 5/8" 90T 5/8" #2005-12-12 G 3/4" 90T 3/4" #

2013-07-04 7/16" -20 UNF JFS 1/4"2013-08-04 1/2" -20 UNF JFS 1/4"2013-08-06 1/2" -20 UNF JFS 3/8" #2013-09-04 9/16" -18 UNF JFS 1/4"2013-09-06 9/16" -18 UNF JFS 3/8"2013-12-06 3/4" -16 UNF JFS 3/8"2013-12-08 3/4" -16 UNF JFS 1/2"2013-14-08 7/8" -14 UNF JFS 1/2"2013-14-10 7/8" -14 UNF JFS 5/8"2013-17-12 1 1/16" -12 UN JFS 3/4"2013-21-16 1 5/16" -12 UN JFS 1" #


2013

JFS37°cone sealing

2009-06-06 G 3/8" FS PL 3/8" #2009-06-08 G 3/8" FS PL 1/2" #2009-08-08 G 1/2" FS PL 1/2" #2009-12-08 G 3/4" FS PL 1/2" #2009-12-12 G 3/4" FS PL 3/4" #2009-16-12 G 1" FS PL 3/4" #


2009

G FS PLANFlat face seal



2028-12-06 12mm SP 45° 3/8" #2028-22-12 22mm SP 45° 3/4" #

Part nr Pipe Type Hose i.d.

2028

SP 45°

2014-09-06 9/16" -18 UNF JM 3/8"2014-12-06 3/4" -16 UNF JM 3/8"2014-12-08 3/4" -16 UNF JM 1/2"2014-14-08 7/8" -14 UNF JM 1/2"2014-17-12 1 1/16" -12 UN JM 3/4"


2014

JM37°cone sealing

2023-18-04 M18 x1,5 10mm MSM 1/4" #2023-20-06 M20 x1,5 12mm MSM 3/8" #2023-22-06 M22 x1,5 14mm MSM 3/8" #2023-24-08 M24 x1,5 16mm MSM 1/2" #2023-30-10 M30 x2 20mm MSM 5/8" #

2023

MSM


2016

J 90°37°cone sealing

Part nr Thread Pipe Type Hose i.d.

2020

MLM

2020-12-04 M12 x1,5 6mm MLM 1/4" #2020-14-04 M14 x1,5 8mm MLM 1/4" #2020-16-06 M16 x1,5 10mm MLM 3/8" #2020-18-06 M18 x1,5 12mm MLM 3/8" #2020-22-08 M22 x1,5 15mm MLM 1/2" #2020-30-12 M30 x2 22mm MLM 3/4" #2020-36-16 M36 x2 28mm MLM 1" #



2026

SP

2026-06-04 6mm SP 1/4" #2026-08-04 8mm SP 1/4" #2026-12-06 12mm SP 3/8" #2026-14-06 14mm SP 3/8" #2026-15-06 15mm SP 3/8" #2026-15-08 15mm SP 1/2" #2026-16-08 16mm SP 1/2" #2026-22-10 22mm SP 5/8" #2026-25-12 25mm SP 3/4" #


2027

SP 90°

2027-06-04 6mm SP 90° 1/4" #2027-08-04 8mm SP 90° 1/4" #2027-10-04 10mm SP 90° 1/4" #2027-10-06 10mm SP 90° 3/8" #2027-15-08 15mm SP 90° 1/2" #2027-20-10 20mm SP 90° 5/8" #

2016-07-04 7/16" -20 UNF J 90° 1/4"2016-08-04 1/2" -20 UNF J 90° 1/4"2016-09-04 9/16" -18 UNF J 90° 1/4"2016-09-06 9/16" -18 UNF J 90° 3/8"2016-12-06 3/4" -16 UNF J 90° 3/8"2016-12-08 3/4" -16 UNF J 90° 1/2"2016-14-08 7/8" -14 UNF J 90° 1/2"2016-17-10 1 1/16" -12 UN J 90° 5/8"2016-17-12 1 1/16" -12 UN J 90° 3/4"2016-19-12 1 3/16" -12 UN J 90° 3/4" #2016-21-12 1 5/16" -12 UN J 90° 3/4" #

# = In stock.


PRODUCT GROUP 200 REUSABLE FITTINGS

2

2036-12-06 M20 x1,5 12mm DKSO FS 3/8" #2036-14-06 M22 x1,5 14mm DKSO FS 3/8" #2036-16-08 M24 x1,5 16mm DKSO FS 1/2" #


2033

DKLO FS

2033-12-06 M18 x1,5 12mm DKLO FS 3/8" #2033-15-08 M22 x1,5 15mm DKLO FS 1/2"2033-18-10 M26 x1,5 18mm DKLO FS 5/8" #


2034

DKLO 90°

2034-15-08 M22 x1,5 15mm DKLO 90° 1/2" #2081-04-04 G 1/4" GB 1/4" #2081-06-06 G 3/8" GB 3/8" #2081-08-08 G 1/2" GB 1/2" #2081-12-12 G 3/4" GB 3/4" #

2081

BANJO BOLTG-threaded (BSP)

2082-01BANJO BOLT

G-threaded (BSP)

2082-01-04 G 1/4" Bolt L = 29,02082-01-06 G 3/8" Bolt L = 36,02082-01-08 G 1/2" Bolt L = 44,52082-01-12 G 3/4" Bolt L = 51,82082-01-16 G 1" Bolt L = 66,3

Part nr Thread Type Lenght


2039

R M

Part nr Bult size Type Hose i.d.


2035

DKLO 45°

2035-15-08 M22 x1,5 15mm DKLO 45° 1/2" #


2036

DKSO FS

2039-04-04 R 1/4" M 1/4" #



Assemblies of reusable fi ttings on a non-skived hoseSAE 100 R1T and R2AT.

ASSEMBLING INSTRUCTIONS FOR SKIVE AND NON SKIVE HOSES

1. Cut the hose squarely to the desired length using a fi ne toothed hacksaw or preferably a cut-off machine, not forget-ting to subtract the hose cut-off lenght 'A' ( obtained from the insert dimensions in this catalogue). Remove dirt particles from the bore of the hose. Place the mandrel in the vice and push the hose from the fi rst notch down to the wire braiding.

2. Slit the cover to be removed longituddinally around the diameter of the hose, then slice the unwanted cover off the wire braiding.

3. Finish cleaning with a wire brush to remove any remaning pieces of hose cover from the wire braiding. It is importante that steps are taken to ensure that the wire braiding remains oil free.

4. Place the ferrule in the vice. Do not lubricate either braid or internal threads of the ferrule. Screw the hose into the ferrule (anticlockwise) until the hose bottoms (on lonh as-semblies place the hose in the vice without fl attening).

5. Lubricate the hose insert (the taper area only not the threads) with the appropriate fl uid in the hose or a compatible lubricant.

6. Screw the insert into the ferrule until it seats. No further tightening is neccessary.

NOTE: If a wire brushing machine is avaliable ignore steps 1-3 inclusive and proceed as follows. Set up the machine for the correct diameter hose and the correct length of cover to be removed. Brusch down the outer cover of the hose to the steel reinforcement then proceed with steps 4-6 inclusive.


4:2

HYDROSCAND CROSS OvER fiTTiNGS

CROSS OvER fiTTiNGS

PRODUCT GROUP 300

Hydroscand’s Cross Over Fittings are suitable for both spiral and braided hoses. They are recommended for a wide range of fluids such as hydraulic oil, solvents, gases, water cleaning equipment etc.

All fittings are manufactured in one piece except for the compact bend which are soldered.

There are three types of nuts on the Hydroscand fittings, they can be recognised by the different suffixes in their part numbers:

The part number has no suffix = The fitting is delivered with a crimped nut.

The part number has suffix 1 = The fitting is delivered with a thrust wire nut.

The part number has suffix 2 = The fitting is delivered with a slip-on nut which is kept in place with a plastic washer.

Please note that the working pressure is reduced for Deltaflex and Gammaflex5 above 1".

The following working pressures are recommended:

For heavy duty applications with Deltaflex or Gamma-flex5 we recommend our Interlock series (4400).

A correct assembly makes a safe unit. Follow the assem-bling instruction.


Working Pressure in MPa1 MPa = 10 Bar = 145 psi

Hose size WPinch mm MPa5/8" 16.0 40.03/4" 19.0 38.0

1" 25.0 32.01 1/4" 32.0 21.01 1/2" 38.0 18.5

2" 50.0 16.5

HYDROSCAND CROSS OvER fiTTiNGS PRODUCT GROUP 300


fERRULES PAGE

fLANGE fiTTiNGS PAGE

G-THREADED fiTTiNGS PAGE

ORfS-fiTTiNGS PAGE

MiSCELLANEOUS fiTTiNGS PAGE

UNifiED-THREADED fiTTiNGS PAGE

METRiC-THREADED fiTTiNGS PAGE

fRENCH TYPES PAGE

PLUG-iN fiTTiNGS WEO PAGE

STAND PiPES PAGE

4200-07 EN1SC Ferrules 1144200-11 EN1SN, 2SC Ferrules 1144200-12 EN2SN Ferrules 1144200-19 EN4SP/4SH Ferrules 1144200-20 EN4SH Ferrules 1144200-21 EN1SN Ferrules 1144200-22 EN2SN Ferrules 1144200-26 Ferrules P.T.F.E. / Teflon smooth 1154200-27 Ferrules R7 / R8 1154200-23 EN1SN, 2SC Ferrules 1154200-28 Ferrules Thermoplastic 1-steel 1154200-29 Ferrules Thermoplastic 2-steel 1154200-30 Ferrules P.T.F.E. / Teflon 1154200-40 FerrulesEN 854 R3 115

4201 G-threaded straight, Crimped nut 1164201~1 G-threaded straight, Thrust-wired nut 1164201~2 G-threaded straight, Slip-on nut 1164311 G-threaded straight, Crimped nut 1174311~1 G-threaded straight, Thrust-wired nut 1174209~1 G-threaded straight, Thrust-wired nut 1174202 G-threaded straight 1174239 R-threaded straight 1174203 G-threaded 90° bend, Crimped nut 1184203~1 G-threaded 90°bend, Thrust-wired nut 1184313~1 G-threaded 90° bend, thrust-wired nut 1184205 G-threaded 90° Compact bend, Crimped nut 1184207 G-threaded 90° forged bend, Crimped nut 1184207~1 G-threaded 90° forged bend, thrust-wired nut 1184204 G-threaded 45° bend, Crimped nut 1194204~1 G-threaded 45° bend, thurst-wired nut 1194206~1 G-threaded 45° compact bend, thurst-wired nut 1194204~7 G-threaded 45° short bend, thurst-wired nut 1194314 G-threaded 45° bend, crimped nut 1194314~1 G-threaded 45° bend, thurst-wired nut 119

4213~1 Unified-threaded straight, thrust-wired nut 1204213 Unified-threaded straight, Crimped nut 1204214 Unified-threaded straight 1204216 Unified-threaded 90° bend, crimped nut 1204216~1 Unified-threaded 90° bend, thrust-wired nut 1214217 Unified-threaded 45° bend, crimped nut 1214218~1 Unified-threaded 90° compact bend 1214217~1 Unified-threaded 45° bend, Thrust-wired nut 1214217~7 Unified-threaded 45° short bend, crimped nut 121

4215 Unified-threaded straight, for O-ring 1224240 NPTF-threaded straight 1224241 NPSM-threaded straight, crimped nut 1224280 BSP Banjo 1274280-01 Banjo Bolt for BSP Banjo 1274281-01 Banjo Bolt, double for BSP Banjo 1284282 Metric banjo 1284282-01 Banjo Bolt for metric Banjo 1284276 Sticko 1304277 Hose joint 1304284 M-threaded straight, crimped nut 1304287 G-threaded straight, crimped nut 1304231 M-threaded straight 1304373 DKSO special 1314374 Handle fitting 131

4270~2 M-threaded straight, slip-on nut 1244271~2 M-threaded 90° bend, slip-on nut 1244272~2 M-threaded 45° bend, slip-on nut 1254220 M-threaded straight 1254273~2 M-threaded straight, slip-on nut 1254274~2 M-threaded 90° bend, slip-on nut 1254275~2 M-threaded 45° bend, slip-on nut 1264223 M-threaded straight 126

4226 Stand pipe straight 1264227 Stand pipe 90° bend 1274228 Stand pipe 45° bend 127

4243 SAE Flange straight 1224244 SAE Flange 90° bend 1224244~6 SAE Flange 90° short bend 1224248 SAE Flange 45°bend 1234253 SAE Flange straight 1234263 Supercat Flange straight 1234254 SAE Flange 90°bend 1234258 SAE Flange 45°bend 1234264 Supercat Flange 90°bend 1234268 Supercat Flange 45°bend 124

4290 Unified-threaded straight, crimped nut 1284290~2 Unified-threaded straight, slip-on nut 1284291 Unified-threaded 90° bend, crimped nut 1294291~2 Unified-threaded 90° bend, slip-on nut 1294291~7 Unified-threaded 90° short bend, slip-on nut 1294292 Unified-threaded 45° bend, crimped nut 1294292~2 Unified-threaded 45° bend, slip-on nut 1294295 Unified-threaded straight 130

4224~2 M-threaded straight, slip-on nut 1314221 M-threaded straight, slip-on nut 1314233~2 M-threaded straight, slip-on nut 1314234~2 M-threaded 90° bend, slip-on nut 1314235~2 M-threaded 45° bend, slip-on nut 131

3C14 710 Plug-in fitting straight 1323C14 712 Plug-in fitting 45° bend 1323C14 714 Plug-in fitting 90° bend 1323C14 748 Release ring 1323C14 749 Assembly stop 132

TAbLE Of CONTENTS

PRODUCT GROUP 300 HYDROSCAND CROSS OvER fiTTiNGS


4:2

ASSEMbLY iNSTRUCTiONS

C b

A

2. If using a skive ferrule, the hose should be skived to the steel wire. The skiving length "L" is noted in the Swaging Manual. Be careful not to damage the steel wire when skiving. If you are using non-skived ferrules you do not need to skive the hose. Clean the hose end from dirt and particles.

1. Cut the hose transversely. Remember that all fittings have a cut-off length "A".

3. Push the ferrule onto the hose until it stops. Lubri-cate the insert and push it into the hose until the stop "B" meets the hose end. Thereafter, pull out the ferrule towards "C".

4. Swage the ferrule and the fitting according to the required swage diameter "D" (see the Swaging Manual). Use a caliper to check the swage diameter.

NOTE! It is important to use hoses and fittings that are adjusted to fit together. Our hoses and fittings have been tested for a perfect fit.

5. Make sure that the correct internal collapse (see the Swaging Manual) has been achieved by using the Hydroscand control pin (9015-xx-xx). The GO part should pass into the fitting to make sure the swaging is not overdone. The STOP part, on the other hand, should not be able to pass to make sure the swaging is not underdone.

The Hydroscand control pins (9015-xx-xx) are equipped with one side applicable for braided hoses (knurled), and one side for spiral hoses (four grooves).



4200-07EN1SC fERRULES

Non-skive

4200-19EN4SP/4SH fERRULES

Skive

4200-22EN2SN fERRULES

Skive

Part number Use with Hose ID Part number Use with Hose ID

Part number Use with Hose ID

4200-07-04 EN1SC 1/4"4200-07-05 EN1SC 5/16"4200-07-06 EN1SC 3/8"4200-07-08 EN1SC 1/2"4200-07-10 EN1SC 5/8"4200-07-12 EN1SC 3/4"4200-07-16 EN1SC 1"

4200-19-04 EN4SP/Deltaflex 1/4"4200-19-06 EN4SP/Deltaflex 3/8"4200-19-08 EN4SP/Deltaflex 1/2"4200-19-10 EN4SP/Deltaflex 5/8"4200-19-12 EN4SP/4SH/Deltaflex 3/4"4200-19-16 EN4SP/4SH/Deltaflex 1"4200-19-20 EN4SP 1 1/4"4200-19-24 EN4SP 1 1/2"4200-19-32 EN4SP/Deltaflex 2"

4200-22-20 EN2SN 1 1/4"4200-22-24 EN2SN 1 1/2"4200-22-32 EN2SN 2"

4200-20EN4SH fERRULES

Skive


4200-20-20 EN4SH/Deltaflex 1 1/4"4200-20-24 EN4SH/Deltaflex 1 1/2"4200-20-32 EN4SH 2"


Skive


4200-21-20 EN1SN 1 1/4"4200-21-24 EN1SN 1 1/2"4200-21-32 EN1SN 2"

4200-11EN1SN, 2SC fERRULES

Non-skive


4200-11-03 EN1SN, 2SC 3/16"4200-11-04 EN1SN, 2SC 1/4"4200-11-05 EN1SN, 2SC 5/16"4200-11-06 EN1SN, 2SC 3/8"4200-11-08 EN1SN, 2SC 1/2"4200-11-10 EN1SN, 2SC 5/8"4200-11-12 EN1SN, 2SC 3/4"4200-11-16 EN1SN, 2SC 1"4200-11-20 EN1SN 1 1/4"4200-11-24 EN1SN 1 1/2"4200-11-32 EN1SN 2"


Non-skive


4200-12-03 EN2SN 3/16"4200-12-04 EN2SN 1/4"4200-12-05 EN2SN 5/16"4200-12-06 EN2SN 3/8"4200-12-08 EN2SN 1/2"4200-12-10 EN2SN 5/8"4200-12-12 EN2SN 3/4"4200-12-16 EN2SN 1"4200-12-20 EN2SN 1 1/4"4200-12-24 EN2SN 1 1/2"4200-12-32 EN2SN 2"



4:2

4200-23EN1SN, 2SC fERRULES

Skive

4200-28fERRULES

THERMOPLASTiC 1-STEEL

Non-skive

4200-40fERRULES

EN 854 R3

Non-skive

Part number Use with Hose ID Part number Use with Hose ID


4200-23-03 EN1SN/2SN 3/16"4200-23-04 EN1SN/2SN 1/4"4200-23-05 EN1SN/2SN 5/16"4200-23-06 EN1SN/2SN 3/8"4200-23-08 EN1SN/2SN 1/2"4200-23-10 EN1SN/2SN 5/8"4200-23-12 EN1SN/2SN 3/4"4200-23-16 EN1SN/2SN 1"

4200-28-03 Thermoplastic 1W 3/16"4200-28-04 Thermoplastic 1W 1/4"4200-28-05 Thermoplastic 1W 5/16"4200-28-06 Thermoplastic 1W 3/8"4200-28-08 Thermoplastic 1W / R8 1/2"4200-28-10 Thermoplastic 1W 5/8"4200-28-12 Thermoplastic 1W 3/4"4200-28-16 Thermoplastic 1W 1"

4200-40-04 EN 854 R3 1/4"4200-40-06 EN 854 R3 3/8"4200-40-08 EN 854 R3 1/2"4200-40-10 EN 854 R3 5/8"4200-40-12 EN 854 R3 3/4"4200-40-16 EN 854 R3 1"

4200-29fERRULES

THERMOPLASTiC 2-STEEL

Non-skive


4200-29-04 Thermoplastic 2W 1/4"4200-29-06 Thermoplastic 2W 3/8"4200-29-08 Thermoplastic 2W 1/2"

4200-30fERRULES

P.T.f.E. / TEfLON

Non-skive


4200-30-04 P.T.F.E. wrapped 1/4"4200-30-06 P.T.F.E. wrapped 3/8"4200-30-08 P.T.F.E. wrapped 1/2"4200-30-10 P.T.F.E. wrapped 5/8"4200-30-12 P.T.F.E. wrapped 3/4"4200-30-16 P.T.F.E. wrapped 1"4200-30-20 P.T.F.E. wrapped 1 1/4"4200-30-24 P.T.F.E. wrapped 1 1/2"4200-30-32 P.T.F.E. wrapped 2"

4200-26fERRULES

P.T.f.E. / TEfLON SMOOTH

Non-skive


4200-26-03 P.T.F.E. smooth 3/16"4200-26-04 P.T.F.E. smooth 1/4"4200-26-05 P.T.F.E. smooth 5/16"4200-26-06 P.T.F.E. smooth 3/8"4200-26-08 P.T.F.E. smooth 1/2"4200-26-10 P.T.F.E. smooth 5/8"4200-26-12 P.T.F.E. smooth 3/4"4200-26-16 P.T.F.E. smooth 1"

4200-27fERRULES R7 / R8

Non-skive


4200-27-03 Thermoplastic R7 / R8 3/16"4200-27-04 Thermoplastic R7 / R8 1/4"4200-27-05 Thermoplastic R7 / R8 5/16"4200-27-06 Thermoplastic R7 / R8 3/8"4200-27-08 Thermoplastic R7 1/2"4200-27-12 Thermoplastic R7 3/4"4200-27-16 Thermoplastic R7 1"



4201G-THREADED STRAiGHT,

CRiMPED NUT

60° cone sealing

4201~1G-THREADED STRAiGHT,

THRUST-WiRED NUT

60° cone sealing


SLiP-ON NUT

60° cone sealing

Part number Thread Type Hose ID Part number Thread Type Hose ID

Part number Thread Type Hose ID

4201-02-03 G 1/8" FS 3/16"4201-02-04 G 1/8" FS 1/4"4201-04-03 G 1/4" FS 3/16"4201-04-04 G 1/4" FS 1/4"4201-04-05 G 1/4" FS 5/16"4201-04-06 G 1/4" FS 3/8"4201-06-04 G 3/8" FS 1/4"4201-06-05 G 3/8" FS 5/16"4201-06-06 G 3/8" FS 3/8"4201-06-08 G 3/8" FS 1/2"4201-08-06 G 1/2" FS 3/8"4201-08-08 G 1/2" FS 1/2"4201-08-10 G 1/2" FS 5/8"4201-08-12 G 1/2" FS 3/4"4201-10-10 G 5/8" FS 5/8"4201-12-08 G 3/4" FS 1/2"4201-12-10 G 3/4" FS 5/8"4201-12-12 G 3/4" FS 3/4"4201-12-16 G 3/4" FS 1"4201-16-12 G 1" FS 3/4"4201-16-16 G 1" FS 1"4201-20-20 G 1 1/4" FS 1 1/4"4201-24-24 G 1 1/2" FS 1 1/2"4201-32-32 G 2" FS 2"

4201-02-03-1 G 1/8" FS 3/16"4201-02-04-1 G 1/8" FS 1/4"4201-04-03-1 G 1/4" FS 3/16"4201-04-04-1 G 1/4" FS 1/4"4201-04-05-1 G 1/4" FS 5/16"4201-04-06-1 G 1/4" FS 3/8"4201-06-04-1 G 3/8" FS 1/4"4201-06-05-1 G 3/8" FS 5/16"4201-06-06-1 G 3/8" FS 3/8"4201-06-08-1 G 3/8" FS 1/2"4201-08-06-1 G 1/2" FS 3/8"4201-08-08-1 G 1/2" FS 1/2"4201-08-10-1 G 1/2" FS 5/8"4201-08-12-1 G 1/2" FS 3/4"4201-10-08-1 G 5/8" FS 1/2"4201-10-10-1 G 5/8" FS 5/8"4201-12-08-1 G 3/4" FS 1/2"4201-12-10-1 G 3/4" FS 5/8"4201-12-12-1 G 3/4" FS 3/4"4201-12-16-1 G 3/4" FS 1"4201-16-12-1 G 1" FS 3/4"4201-16-16-1 G 1" FS 1"

4201-04-04-2 G 1/4" FS 1/4"4201-06-06-2 G 3/8" FS 3/8"4201-08-08-2 G 1/2" FS 1/2"



4:2


CRiMPED NUT

60° cone sealing with O-ring

4202G-THREADED STRAiGHT

60° cone sealing

4239R-THREADED STRAiGHT

Coned thread and 60° cone sealing


THRUST-WiRED NUT



THRUST-WiRED NUT

Flat face sealing





4311-04-04 G 1/4" O FS 1/4"4311-06-06 G 3/8" O FS 3/8"4311-08-08 G 1/2" O FS 1/2"4311-10-10 G 5/8" O FS 5/8"4311-12-12 G 3/4" O FS 3/4"4311-16-16 G 1" O FS 1"4311-20-20 G 1 1/4" O FS 1 1/4"4311-24-24 G 1 1/2" O FS 1 1/2"4311-32-32 G 2" O FS 2"

4202-02-03 G 1/8" M 3/16"4202-02-04 G 1/8" M 1/4"4202-04-03 G 1/4" M 3/16"4202-04-04 G 1/4" M 1/4"4202-04-05 G 1/4" M 5/16"4202-04-06 G 1/4" M 3/8"4202-06-04 G 3/8" M 1/4"4202-06-05 G 3/8" M 5/16"4202-06-06 G 3/8" M 3/8"4202-06-08 G 3/8" M 1/2"4202-08-04 G 1/2" M 1/4"4202-08-05 G 1/2" M 5/16"4202-08-06 G 1/2" M 3/8"4202-08-08 G 1/2" M 1/2"4202-08-10 G 1/2" M 5/8"4202-08-12 G 1/2" M 3/4"4202-10-08 G 5/8" M 1/2"4202-10-10 G 5/8" M 5/8"4202-12-08 G 3/4" M 1/2"4202-12-10 G 3/4" M 5/8"4202-12-12 G 3/4" M 3/4"4202-12-16 G 3/4" M 1"4202-16-12 G 1" M 3/4"4202-16-16 G 1" M 1"4202-20-16 G 1 1/4" M 1"4202-20-20 G 1 1/4" M 1 1/4"4202-24-20 G 1 1/2" M 1 1/4"4202-24-24 G 1 1/2" M 1 1/2"4202-32-24 G 2" M 1 1/2"4202-32-32 G 2" M 2"

4239-02-03 R 1/8" M 3/16"4239-02-04 R 1/8" M 1/4"4239-04-03 R 1/4" M 3/16"4239-04-04 R 1/4" M 1/4"4239-04-06 R 1/4" M 3/8"4239-06-04 R 3/8" M 1/4"4239-06-05 R 3/8" M 5/16"4239-06-06 R 3/8" M 3/8"4239-06-08 R 3/8" M 1/2"4239-08-06 R 1/2" M 3/8"4239-08-08 R 1/2" M 1/2"4239-12-10 R 3/4" M 5/8"4239-12-12 R 3/4" M 3/4"4239-16-16 R 1" M 1"4239-20-20 R 1 1/4" M 1 1/4"4239-24-24 R 1 1/2" M 1 1/2"4239-32-32 R 2" M 2"

4311-16-16-1 G 1" O FS 1"4311-20-16-1 G 1 1/4" O FS 1"4311-20-20-1 G 1 1/4" O FS 1 1/4"4311-24-24-1 G 1 1/2" O FS 1 1/2"4311-32-32-1 G 2" O FS 2"

4209-04-04-1 G 1/4" FF FS 1/4"4209-06-04-1 G 3/8" FF FS 1/4"4209-06-05-1 G 3/8" FF FS 5/16"4209-06-06-1 G 3/8" FF FS 3/8"4209-08-05-1 G 1/2" FF FS 5/16"4209-08-06-1 G 1/2" FF FS 3/8"4209-08-08-1 G 1/2" FF FS 1/2"4209-10-08-1 G 5/8" FF FS 1/2"4209-10-10-1 G 5/8" FF FS 5/8"4209-12-08-1 G 3/4" FF FS 1/2"4209-12-10-1 G 3/4" FF FS 5/8"4209-12-12-1 G 3/4" FF FS 3/4"4209-16-12-1 G 1" FF FS 3/4"4209-16-16-1 G 1" FF FS 1"4209-20-20-1 G 1 1/4" FF FS 1 1/4"



4203G-THREADED 90° bEND,

CRiMPED NUT

60° cone sealing

4313~1G-THREADED 90° bEND,

THRUST-WiRED NUT


4205G-THREADED 90° COMPACT

bEND, CRiMPED NUT

60° cone sealing

4207G-THREADED 90° fORGED

bEND, CRiMPED NUT

60° cone sealing

4207~1G-THREADED 90° fORGED

bEND, THRUST-WiRED NUT

60° cone sealing

4203~1G-THREADED 90°bEND,

THRUST-WiRED NUT

60° cone sealing






4203-02-03 G 1/8" 90° FS 3/16"4203-02-04 G 1/8" 90° FS 1/4"4203-04-03 G 1/4" 90° FS 3/16"4203-04-04 G 1/4" 90° FS 1/4"4203-04-06 G 1/4" 90° FS 3/8"4203-06-04 G 3/8" 90° FS 1/4"4203-06-05 G 3/8" 90° FS 5/16"4203-06-06 G 3/8" 90° FS 3/8"4203-06-08 G 3/8" 90° FS 1/2"4203-08-06 G 1/2" 90° FS 3/8"4203-08-08 G 1/2" 90° FS 1/2"4203-10-08 G 5/8" 90° FS 1/2"4203-10-10 G 5/8" 90° FS 5/8"4203-12-08 G 3/4" 90° FS 1/2"4203-12-10 G 3/4" 90° FS 5/8"4203-12-12 G 3/4" 90° FS 3/4"4203-16-12 G 1" 90° FS 3/4"4203-16-16 G 1" 90° FS 2"4203-20-20 G 1 1/4" 90° FS 1 1/4"4203-24-24 G 1 1/2" 90° FS 1 1/2"4203-32-32 G 2" 90° FS 2"

4313-20-20-1 G 1 1/4" O 90° FS 1 1/4"4313-24-24-1 G 1 1/2" O 90° FS 1 1/2"4313-32-32-1 G 2" O 90° FS 2"

4205-02-03 G 1/8" C 90° FS 3/16"4205-02-04 G 1/8" C 90° FS 1/4"4205-04-04 G 1/4" C 90° FS 1/4"4205-06-04 G 3/8" C 90° FS 1/4"4205-06-05 G 3/8" C 90° FS 5/16"4205-06-06 G 3/8" C 90° FS 3/8"4205-08-08 G 1/2" C 90° FS 1/2"4205-10-10 G 5/8" C 90° FS 5/8"4205-12-12 G 3/4" C 90° FS 3/4"4205-16-16 G 1" C 90° FS 1"

4207-04-04 G 1/4" C 90° FS 1/4"4207-06-06 G 3/8" C 90° FS 3/8"4207-08-08 G 1/2" C 90° FS 1/2"4207-12-12 G 3/4" C 90° FS 3/4"

4207-04-04-1 G 1/4" C 90° FS 1/4"4207-06-06-1 G 3/8" C 90° FS 3/8"4207-08-08-1 G 1/2" C 90° FS 1/2"4207-12-12-1 G 3/4" C 90° FS 3/4"4207-16-16-1 G 1" C 90° FS 1"

4203-02-03-1 G 1/8" 90° FS 3/16"4203-02-04-1 G 1/8" 90° FS 1/4"4203-04-03-1 G 1/4" 90° FS 3/16"4203-04-04-1 G 1/4" 90° FS 1/4"4203-04-06-1 G 1/4" 90° FS 3/8"4203-06-04-1 G 3/8" 90° FS 1/4"4203-06-06-1 G 3/8" 90° FS 3/8"4203-06-08-1 G 3/8" 90° FS 1/2"4203-08-06-1 G 1/2" 90° FS 3/8"4203-08-08-1 G 1/2" 90° FS 1/2"4203-10-08-1 G 5/8" 90° FS 1/2"4203-10-10-1 G 5/8" 90° FS 5/8"4203-12-08-1 G 3/4" 90° FS 1/2"4203-12-10-1 G 3/4" 90° FS 5/8"4203-12-12-1 G 3/4" 90° FS 3/4"4203-16-12-1 G 1" 90° FS 3/4"4203-16-16-1 G 1" 90° FS 1"



4:2


CRiMPED NUT

60° cone sealing


THURST-WiRED NUT

60° cone sealing

4206~1G-THREADED 45° COMPACT bEND, THURST-WiRED NUT

60° cone sealing

4204~7G-THREADED 45° SHORT

bEND, THURST-WiRED NUT

60° cone sealing


CRiMPED NUT



THURST-WiRED NUT








4204-02-03 G 1/8" 45° FS 3/16"4204-02-04 G 1/8" 45° FS 1/4"4204-04-04 G 1/4" 45° FS 1/4"4204-06-04 G 3/8" 45° FS 1/4"4204-06-05 G 3/8" 45° FS 5/16"4204-06-06 G 3/8" 45° FS 3/8"4204-06-08 G 3/8" 45° FS 1/2"4204-08-06 G 1/2" 45° FS 3/8"4204-08-08 G 1/2" 45° FS 1/2"4204-10-08 G 5/8" 45° FS 1/2"4204-10-10 G 5/8" 45° FS 5/8"4204-12-08 G 3/4" 45° FS 1/2"4204-12-10 G 3/4" 45° FS 5/8"4204-12-12 G 3/4" 45° FS 3/4"4204-16-12 G 1" 45° FS 3/4"4204-16-16 G 1" 45° FS 1"4204-20-20 G 1 1/4" 45° FS 1 1/4"4204-24-24 G 1 1/2" 45° FS 1 1/2"4204-32-32 G 2" 45° FS 2"

4204-02-03-1 G 1/8" 45° FS 3/16"4204-02-04-1 G 1/8" 45° FS 1/4"4204-04-04-1 G 1/4" 45° FS 1/4"4204-06-04-1 G 3/8" 45° FS 1/4"4204-06-05-1 G 3/8" 45° FS 5/16"4204-06-06-1 G 3/8" 45° FS 3/8"4204-06-08-1 G 3/8" 45° FS 1/2"4204-08-06-1 G 1/2" 45° FS 3/8"4204-08-08-1 G 1/2" 45° FS 1/2"4204-10-08-1 G 5/8" 45° FS 1/2"4204-10-10-1 G 5/8" 45° FS 5/8"4204-12-08-1 G 3/4" 45° FS 1/2"4204-12-10-1 G 3/4" 45° FS 5/8"4204-12-12-1 G 3/4" 45° FS 3/4"4204-16-12-1 G 1" 45° FS 3/4"4204-16-16-1 G 1" 45° FS 1"

4206-04-04-1 G 1/4" C 45° FS 1/4"4206-06-06-1 G 3/8" C 45° FS 3/8"4206-08-06-1 G 1/2" C 45° FS 3/8"4206-08-08-1 G 1/2" C 45° FS 1/2"4206-10-10-1 G 5/8" C 45° FS 5/8"4206-12-12-1 G 3/4" C 45° FS 3/4"4206-16-16-1 G 1" C 45° FS 1"

4204-04-04-7 G 1/4" 45° S FS 1/4"4204-06-06-7 G 3/8" 45° S FS 3/8"4204-08-08-7 G 1/2" 45° S FS 1/2"4204-12-12-7 G 3/4" 45° S FS 3/4"4204-16-16-7 G 1" 45° S FS 1"

4314-04-04 G 1/4" O 45° FS 1/4"4314-06-06 G 3/8" O 45° FS 3/8"4314-08-08 G 1/2" O 45° FS 1/2"4314-12-12 G 3/4" O 45° FS 3/4"4314-16-16 G 1" O 45° FS 1"4314-20-20 G 1 1/4" O 45° FS 1 1/4"4314-24-24 G 1 1/2" O 45° FS 1 1/2"4314-32-32 G 2" O 45° FS 2"

4314-20-20-1 G 1 1/4" O 45° FS 1 1/4"4314-24-24-1 G 1 1/2" O 45° FS 1 1/2"4314-32-32-1 G 2" O 45° FS 2"



4213UNifiED-THREADED

STRAiGHT, CRiMPED NUT

74° cone sealing

4214UNifiED-THREADED STRAiGHT

74° cone sealing


4213-07-03 7/16"–20 UNF JIC FS 3/16"4213-07-04 7/16"–20 UNF JIC FS 1/4"4213-08-04 1/2"–20 UNF JIC FS 1/4"4213-09-04 9/16"–18 UNF JIC FS 1/4"4213-09-05 9/16"–18 UNF JIC FS 5/16"4213-09-06 9/16"–18 UNF JIC FS 3/8"4213-09-08 9/16"–18 UNF JIC FS 1/2"4213-10-06 5/8"–18 UNF JIC FS 3/8"4213-12-05 3/4"–16 UNF JIC FS 5/16"4213-12-06 3/4"–16 UNF JIC FS 3/8"4213-12-08 3/4"–16 UNF JIC FS 1/2"4213-14-06 7/8"–14 UNF JIC FS 3/8"4213-14-08 7/8"–14 UNF JIC FS 1/2"4213-14-10 7/8"–14 UNF JIC FS 5/8"4213-17-08 1 1/16"–12 UN JIC FS 1/2"4213-17-10 1 1/16"–12 UN JIC FS 5/8"4213-17-12 1 1/16"–12 UN JIC FS 3/4"4213-17-16 1 1/16"–12 UN JIC FS 1"4213-19-12 1 3/16"–12 UN JIC FS 3/4"4213-21-12 1 5/16"–12 UN JIC FS 3/4"4213-21-16 1 5/16"–12 UN JIC FS 1"4213-26-16 1 5/8"–12 UN JIC FS 1"4213-26-20 1 5/8"–12 UN JIC FS 1 1/4"4213-30-20 1 7/8"–12 UN JIC FS 1 1/4"4213-30-24 1 7/8"–12 UN JIC FS 1 1/2"

4214-07-03 7/16"–20 UNF JIC M 3/16"4214-07-04 7/16"–20 UNF JIC M 1/4"4214-08-04 1/2"–20 UNF JIC M 1/4"4214-08-06 1/2"–20 UNF JIC M 3/8"4214-09-04 9/16"–18 UNF JIC M 1/4"4214-09-05 9/16"–18 UNF JIC M 5/16"4214-09-06 9-16"–18 UNF JIC M 3/8"4214-12-05 3/4"–16 UNF JIC M 5/16"4214-12-06 3/4"–16 UNF JIC M 3/8"4214-12-08 3/4"–16 UNF JIC M 1/2"4214-14-06 7/8"–14 UNF JIC M 3/8"4214-14-08 7/8"–14 UNF JIC M 1/2"4214-14-10 7/8"–14 UNF JIC M 5/8"4214-14-12 7/8"–14 UNF JIC M 3/4"4214-17-08 1 1/16"–12 UN JIC M 1/2"4214-17-10 1 1/16"–12 UN JIC M 5/8"4214-17-12 1 1/16"–12 UN JIC M 3/4"4214-17-16 1 1/16"–12 UN JIC M 1"4214-19-12 1 3/16"–12 UN JIC M 3/4"4214-21-12 1 5/16"–12 UN JIC M 3/4"4214-21-16 1 5/16"–12 UN JIC M 1"4214-26-16 1 5/8"–12 UN JIC M 1"4214-26-20 1 5/8"–12 UN JIC M 1 1/4"4214-30-24 1 7/8"–12 UN JIC M 1 1/2"4214-40-32 2 1/2"–12 UN JIC M 2"

4213~1UNifiED-THREADED STRAiGHT,

THRUST-WiRED NUT

74° cone sealing


4213-07-03-1 7/16"–20 UNF JIC FS 3/16"4213-07-04-1 7/16"–20 UNF JIC FS 1/4"4213-08-04-1 1/2"–20 UNF JIC FS 1/4"4213-08-06-1 1/2"–20 UNF JIC FS 3/8"4213-09-04-1 9/16"–18 UNF JIC FS 1/4"4213-09-05-1 9/16"–18 UNF JIC FS 5/16"4213-09-06-1 9/16"–18 UNF JIC FS 3/8"4213-09-08-1 9/16"–18 UNF JIC FS 1/2"4213-12-06-1 3/4"–16 UNF JIC FS 3/8"4213-12-08-1 3/4"–16 UNF JIC FS 1/2"4213-14-06-1 7/8"–14 UNF JIC FS 3/8"4213-14-08-1 7/8"–14 UNF JIC FS 1/2"4213-14-10-1 7/8"–14 UNF JIC FS 5/8"4213-17-08-1 1 1/16"–12 UN JIC FS 1/2"4213-17-10-1 1 1/16"–12 UN JIC FS 5/8"4213-17-12-1 1 1/16"–12 UN JIC FS 3/4"4213-17-16-1 1 1/16"–12 UN JIC FS 1"4213-19-12-1 1 3/16"–12 UN JIC FS 3/4"4213-21-12-1 1 5/16"–12 UN JIC FS 3/4"4213-21-16-1 1 5/16"–12 UN JIC FS 1"4213-26-16-1 1 5/8"–12 UN JIC FS 1"4213-26-20-1 1 5/8"–12 UN JIC FS 1 1/4"4213-30-20-1 1 7/8"–12 UN JIC FS 1 1/4"4213-30-24-1 1 7/8"–12 UN JIC FS 1 1/2"4213-40-32-1 2 1/2"–12 UN JIC FS 2"

4216UNifiED-THREADED 90° bEND,

CRiMPED NUT

74° cone sealing


4216-07-03 7/16"–20 UNF JIC 90° FS 3/16"4216-07-04 7/16"–20 UNF JIC 90° FS 1/4"4216-08-04 1/2"–20 UNF JIC 90° FS 1/4"4216-09-04 9/16"–18 UNF JIC 90° FS 1/4"4216-09-05 9/16"–18 UNF JIC 90° FS 5/16"4216-09-06 9/16"–18 UNF JIC 90° FS 3/8"4216-12-06 3/4"–16 UNF JIC 90° FS 3/8"4216-12-08 3/4"–16 UNF JIC 90° FS 1/2"4216-14-06 7/8"–14 UNF JIC 90° FS 3/8"4216-14-08 7/8"–14 UNF JIC 90° FS 1/2"4216-14-10 7/8"–14 UNF JIC 90° FS 5/8"4216-17-08 1 1/16"–12 UN JIC 90° FS 1/2"4216-17-10 1 1/16"–12 UN JIC 90° FS 5/8"4216-17-12 1 1/16"–12 UN JIC 90° FS 3/4"4216-19-12 1 3/16"–12 UN JIC 90° FS 3/4"4216-21-12 1 5/16"–12 UN JIC 90° FS 3/4"4216-21-16 1 5/16"–12 UN JIC 90° FS 1"4216-26-16 1 5/8"–12 UN JIC 90° FS 1"4216-26-20 1 5/8"–12 UN JIC 90° FS 1 1/4"4216-30-24 1 7/8"–12 UN JIC 90° FS 1 1/2"4216-40-32 2 1/2"–12 UN JIC 90° FS 2"



4:2

4216~1UNifiED-THREADED 90° bEND,

THRUST-WiRED NUT

74° cone sealing

4217~1UNifiED-THREADED 45° bEND,

THRUST-WiRED NUT

74° cone sealing

4217~7UNifiED-THREADED 45° SHORT

bEND, CRiMPED NUT

74° cone sealing

4218~1UNifiED-THREADED 90° COMPACT

bEND, THRUST-WiRED NUT

74° cone sealing




4216-07-03-1 7/16"-20 UNF JIC 90° FS 3/16"4216-07-04-1 7/16"-20 UNF JIC 90° FS 1/4"4216-08-04-1 1/2"-20 UNF JIC 90° FS 1/4"4216-09-04-1 9/16"-18 UNF JIC 90° FS 1/4"4216-09-05-1 9/16"-18 UNF JIC 90° FS 5/16"4216-09-06-1 9/16"-18 UNF JIC 90° FS 3/8"4216-12-06-1 3/4"-16 UNF JIC 90° FS 3/8"4216-12-08-1 3/4"-16 UNF JIC 90° FS 1/2"4216-14-06-1 7/8"-14 UNF JIC 90° FS 3/8"4216-14-08-1 7/8"-14 UNF JIC 90° FS 1/2"4216-14-10-1 7/8"-14 UNF JIC 90° FS 5/8"4216-17-08-1 1 1/16"-12 UN JIC 90° FS 1/2"4216-17-10-1 1 1/16"-12 UN JIC 90° FS 5/8"4216-17-12-1 1 1/16"-12 UN JIC 90° FS 3/4"4216-19-12-1 1 3/16"-12 UN JIC 90° FS 3/4"4216-21-12-1 1 5/16"-12 UN JIC 90° FS 3/4"4216-21-16-1 1 5/16"-12 UN JIC 90° FS 1"4216-26-16-1 1 5/8"-12 UN JIC 90° FS 1"4216-26-20-1 1 5/8"-12 UN JIC 90° FS 1 1/4"4216-30-24-1 1 7/8"-12 UN JIC 90° FS 1 1/2"4216-40-32-1 2 1/2"-12 UN JIC 90° FS 2"

4217-07-04-1 7/16"-20 UNF JIC 45° FS 1/4"4217-08-04-1 1/2"-20 UNF JIC 45° FS 1/4"4217-09-04-1 9/16"-18 UNF JIC 45° FS 1/4"4217-09-06-1 9/16"-16 UNF JIC 45° FS 3/8"4217-12-06-1 3/4"-16 UNF JIC 45° FS 3/8"4217-12-08-1 3/4"-16 UNF JIC 45° FS 1/2"4217-14-08-1 7/8"-14 UNF JIC 45° FS 1/2"4217-14-10-1 7/8"-14 UNF JIC 45° FS 5/8"4217-17-08-1 1 1/16"-12 UN JIC 45° FS 1/2"4217-17-10-1 1 1/16"-12 UN JIC 45° FS 5/8"4217-17-12-1 1 1/16"-12 UN JIC 45° FS 3/4"4217-19-12-1 1 3/16"-12 UN JIC 45° FS 3/4"4217-21-12-1 1 5/16"-12 UN JIC 45° FS 3/4"4217-21-16-1 1 5/16"-12 UN JIC 45° FS 1"4217-26-20-1 1 5/8"-12 UN JIC 45° FS 1 1/4"4217-30-24-1 1 7/8"-12 UN JIC 45° FS 1 1/2"4217-40-32-1 2 1/2"-12 UN JIC 45° FS 2"

4217-07-04-7 7/16"-20 UNF JIC 45° S FS 1/4"4217-09-04-7 9/16"-18 UNF JIC 45° S FS 1/4"4217-12-06-7 3/4"-16 UNF JIC 45° S FS 3/8"4217-12-08-7 3/4"-16 UNF JIC 45° S FS 1/2"4217-14-08-7 7/8"-14 UNF JIC 45° S FS 1/2"4217-17-12-7 1 1/16"-12 UN JIC 45° S FS 3/4"4217-21-16-7 1 5/16"-12 UN JIC 45° S FS 1"

4218-07-04-1 7/16"-20 UNF C JIC 90° FS 1/4"4218-09-06-1 9/16"-18 UNF C JIC 90° FS 3/8"4218-12-08-1 3/4"-16 UNF C JIC 90° FS 1/2"4218-14-08-1 7/8"-14 UNF C JIC 90° FS 1/2"4218-14-10-1 7/8"-14 UNF C JIC 90° FS 5/8"4218-17-12-1 1 1/16"-12 UN C JIC 90° FS 3/4"4218-21-16-1 1 5/16"-12 UN C JIC 90° FS 1"

4217UNifiED-THREADED 45° bEND,

CRiMPED NUT

74° cone sealing


4217-07-04 7/16"-20 UNF JIC 45° FS 1/4"4217-08-04 1/2"-20 UNF JIC 45° FS 1/4"4217-09-04 9/16"-18 UNF JIC 45° FS 1/4"4217-09-05 9/16"-18 UNF JIC 45° FS 5/16"4217-09-06 9/16"-16 UNF JIC 45° FS 3/8"4217-12-06 3/4"-16 UNF JIC 45° FS 3/8"4217-12-08 3/4"-16 UNF JIC 45° FS 1/2"4217-14-08 7/8"-14 UNF JIC 45° FS 1/2"4217-14-10 7/8"-14 UNF JIC 45° FS 5/8"4217-17-08 1 1/16"-12 UN JIC 45° FS 1/2"4217-17-10 1 1/16"-12 UN JIC 45° FS 5/8"4217-17-12 1 1/16"-12 UN JIC 45° FS 3/4"4217-19-12 1 3/16"-12 UN JIC 45° FS 3/4"4217-21-12 1 5/16"-12 UN JIC 45° FS 3/4"4217-21-16 1 5/16"-12 UN JIC 45° FS 1"4217-26-20 1 5/8"-12 UN JIC 45° FS 1 1/4"4217-30-20 1 7/8"-12 UN JIC 45° FS 1 1/4"4217-30-24 1 7/8"-12 UN JIC 45° FS 1 1/2"4217-40-32 2 1/2"-12 UN JIC 45° FS 2"



4215UNifiED-THREADED STRAiGHT,

fOR O-RiNG

4243SAE fLANGE STRAiGHT

Code 61

4244SAE fLANGE 90° bEND

Code 61

4240NPTf-THREADED STRAiGHT


Part number Thread Type Hose ID Part number Flange size Type Hose ID

Part number Flange size Type Hose ID


4215-07-04 7/16"-20 UNF SAE-O M 1/4"4215-09-06 9/16"-18 UNF SAE-O M 3/8"4215-12-06 3/4"-16 UNF SAE-O M 3/8"4215-12-08 3/4"-16 UNF SAE-O M 1/2"4215-14-08 7/8"-14 UNF SAE-O M 1/2"4215-14-10 7/8"-14 UNF SAE-O M 5/8"4215-17-10 1 1/16"-12 UN SAE-O M 5/8"4215-17-12 1 1/16"-12 UN SAE-O M 3/4"4215-21-12 1 5/16"-12 UN SAE-O M 3/4"4215-21-16 1 5/16"-12 UN SAE-O M 1"

4243-08-08 1/2" SAE3 1/24243-08-10 1/2" SAE3 5/8"4243-08-12 1/2" SAE3 3/4"4243-10-10 5/8" SAE3 5/8"4243-12-08 3/4" SAE3 1/2"4243-12-10 3/4" SAE3 5/8"4243-12-12 3/4" SAE3 3/4"4243-12-16 3/4" SAE3 1"4243-16-12 1" SAE3 3/4"4243-16-16 1" SAE3 1"4243-16-20 1" SAE3 1 1/4"4243-20-16 1 1/4" SAE3 1"4243-20-20 1 1/4" SAE3 1 1/4"4243-24-20 1 1/2" SAE3 1 1/4"4243-24-24 1 1/2" SAE3 1 1/2"4243-24-32 1 1/2" SAE3 2"4243-32-24 2" SAE3 1 1/2"4243-32-32 2" SAE3 2"4243-40-32 2 1/2" SAE3 2"

4244-08-08 1/2" SAE3 90° 1/2"4244-08-10 1/2" SAE3 90° 5/8"4244-08-12 1/2" SAE3 90° 3/4"4244-12-08 3/4" SAE3 90° 1/2"4244-12-10 3/4" SAE3 90° 5/8"4244-12-12 3/4" SAE3 90° 3/4"4244-12-16 3/4" SAE3 90° 1"4244-16-12 1" SAE3 90° 3/4"4244-16-16 1" SAE3 90° 1"4244-16-20 1" SAE3 90° 1 1/4"4244-20-16 1 1/4" SAE3 90° 1"4244-20-20 1 1/4" SAE3 90° 1 1/4"4244-20-24 1 1/4" SAE3 90° 1 1/2"4244-24-20 1 1/2" SAE3 90° 1 1/4"4244-24-24 1 1/2" SAE3 90° 1 1/2"4244-32-24 2" SAE3 90° 1 1/2"4244-32-32 2" SAE3 90° 2"

4240-02-03 1/8"-27 NPTF M 3/16"4240-02-04 1/8"-27 NPTF M 1/4"4240-04-03 1/4"-18 NPTF M 3/16"4240-04-04 1/4"-18 NPTF M 1/4"4240-04-05 1/4"-18 NPTF M 5/16"4240-04-06 1/4"-18 NPTF M 3/8"4240-06-04 3/8"-18 NPTF M 1/4"4240-06-05 3/8"-18 NPTF M 5/16"4240-06-06 3/8"-18 NPTF M 3/8"4240-06-08 3/8"-18 NPTF M 1/2"4240-08-05 1/2"-14 NPTF M 5/16"4240-08-06 1/2"-14 NPTF M 3/8"4240-08-08 1/2"-14 NPTF M 1/2"4240-08-10 1/2"-14 NPTF M 5/8"4240-12-08 3/4"-14 NPTF M 1/2"4240-12-10 3/4"-14 NPTF M 5/8"4240-12-12 3/4"-14 NPTF M 3/4"4240-12-16 3/4"-14 NPTF M 1"4240-16-12 1"-11½ NPTF M 3/4"4240-16-16 1"-11½ NPTF M 1"4240-20-16 1 1/4"-11½ NPTF M 1"4240-20-20 1 1/4"-11½ NPTF M 1 1/4"4240-24-24 1 1/2"-11½ NPTF M 1 1/2"4240-32-32 2"-11½ NPTF M 2"

4244~6SAE fLANGE 90° SHORT bEND

Code 61


4244-12-12-6 3/4" SAE3 90° S 3/4"4244-16-16-6 1" SAE3 90° S 1"4244-20-20-6 1 1/4" SAE3 90° S 1 1/4"4244-24-24-6 1 1/2" SAE3 90° S 1 1/2"4244-32-32-6 2" SAE3 90° S 2"

4241NPSM-THREADED STRAiGHT,

CRiMPED NUT



4241-04-03 1/4"-18 NPSM FS 3/16"4241-04-04 1/4"-18 NPSM FS 1/4"4241-06-06 3/8"-18 NPSM FS 3/8"4241-08-08 1/2"-14 NPSM FS 1/2"



4:2

4248SAE fLANGE 45°bEND

Code 61


Code 62

4253SAE fLANGE STRAiGHT

Code 62


Code 62

Part number Flange size Type Hose ID Part number Flange size Type Hose ID

Part number Flange size Type Hose ID Part number Flange size Type Hose ID

4248-08-08 1/2" SAE3 45° 1/2"4248-08-10 1/2" SAE3 45° 5/8"4248-08-12 1/2" SAE3 45° 3/4"4248-12-08 3/4" SAE3 45° 1/2"4248-12-10 3/4" SAE3 45° 5/8"4248-12-12 3/4" SAE3 45° 3/4"4248-12-16 3/4" SAE3 45° 1"4248-16-12 1" SAE3 45° 3/4"4248-16-16 1" SAE3 45° 1"4248-16-20 1" SAE3 45° 1 1/4"4248-20-16 1 1/4" SAE3 45° 1"4248-20-20 1 1/4" SAE3 45° 1 1/4"4248-24-20 1 1/2" SAE3 45° 1 1/4"4248-24-24 1 1/2" SAE3 45° 1 1/2"4248-32-24 2" SAE3 45° 1 1/2"4248-32-32 2" SAE3 45° 2"4248-40-32 2 1/2" SAE3 45° 2"

4254-08-08 1/2" SAE6 90° 1/2"4254-08-10 1/2" SAE6 90° 5/8"4254-08-12 1/2" SAE6 90° 3/4"4254-12-08 3/4" SAE6 90° 1/2"4254-12-10 3/4" SAE6 90° 5/8"4254-12-12 3/4" SAE6 90° 3/4"4254-12-16 3/4" SAE6 90° 1"4254-16-12 1" SAE6 90° 3/4"4254-16-16 1" SAE6 90° 1"4254-16-20 1" SAE6 90° 1 1/4"4254-20-16 1 1/4" SAE6 90° 1"4254-20-20 1 1/4" SAE6 90° 1 1/4"4254-24-20 1 1/2" SAE6 90° 1 1/4"4254-24-24 1 1/2" SAE6 90° 1 1/2"4254-32-24 2" SAE6 90° 1 1/2"4254-32-32 2" SAE6 90° 2"

4253-08-08 1/2" SAE6 1/2"4253-08-10 1/2" SAE6 5/8"4253-08-12 1/2" SAE6 3/4"4253-12-08 3/4" SAE6 1/2"4253-12-10 3/4" SAE6 5/8"4253-12-12 3/4" SAE6 3/4"4253-12-16 3/4" SAE6 1"4253-16-12 1" SAE6 3/4"4253-16-16 1" SAE6 1"4253-16-20 1" SAE6 1 1/4"4253-20-16 1 1/4" SAE6 1"4253-20-20 1 1/4" SAE6 1 1/4"4253-24-20 1 1/2" SAE6 1 1/4"4253-24-24 1 1/2" SAE6 1 1/2"4253-32-24 2" SAE6 1 1/2"4253-32-32 2" SAE6 2"

4258-08-08 1/2" SAE6 45° 1/2"4258-08-10 1/2" SAE6 45° 5/8"4258-08-12 1/2" SAE6 45° 3/4"4258-12-08 3/4" SAE6 45° 1/2"4258-12-10 3/4" SAE6 45° 5/8"4258-12-12 3/4" SAE6 45° 3/4"4258-12-16 3/4" SAE6 45° 1"4258-16-12 1" SAE6 45° 3/4"4258-16-16 1" SAE6 45° 1"4258-16-20 1" SAE6 45° 1 1/4"4258-20-16 1 1/4" SAE6 45° 1"4258-20-20 1 1/4" SAE6 45° 1 1/4"4258-24-20 1 1/2" SAE6 45° 1 1/4"4258-24-24 1 1/2" SAE6 45° 1 1/2"4258-32-24 2" SAE6 45° 1 1/2"4258-32-32 2" SAE6 45° 2"

4263SUPERCAT fLANGE STRAiGHT


4263-12-12 3/4" SC 3/4"4263-16-16 1" SC 1"4263-20-20 1 1/4" SC 1 1/4"4263-24-24 1 1/2" SC 1 1/2"

4264SUPERCAT fLANGE 90°bEND


4264-12-12 3/4" SC 90° 3/4"4264-16-16 1" SC 90° 1"4264-20-20 1 1/4" SC 90° 1 1/4"4264-24-24 1 1/2" SC 90° 1 1/2"



4268SUPERCAT fLANGE 45°bEND

4270~2M-THREADED STRAiGHT,

SLiP-ON NUT


4271~2M-THREADED 90° bEND,

SLiP-ON NUT


Part number Flange size Type Hose ID Part number Thread Pipe Type Hose ID

Part number Thread Pipe Type Hose ID

4268-12-12 3/4" SC 45° 3/4"4268-16-16 1" SC 45° 1"4268-20-20 1 1/4" SC 45° 1 1/4"4268-24-24 1 1/2" SC 45° 1 1/2"

4270-06-03-2 M 12 x 1.5 6 mm DKLO 3/16"4270-06-04 M 12 x 1.5 6 mm DKLO 1/4"4270-08-03-2 M 14 x 1.5 8 mm DKLO 3/16"4270-08-04-2 M 14 x 1.5 8 mm DKLO 1/4"4270-10-04-2 M 16 x 1.5 10 mm DKLO 1/4"4270-10-05-2 M 16 x 1.5 10 mm DKLO 5/16"4270-10-06 M 16 x 1.5 10 mm DKLO 3/8"4270-12-04-2 M 18 x 1.5 12 mm DKLO 1/4"4270-12-05-2 M 18 x 1.5 12 mm DKLO 5/16"4270-12-06-2 M 18 x 1.5 12 mm DKLO 3/8"4270-15-06-2 M 22 x 1.5 15 mm DKLO 3/8"4270-15-08-2 M 22 x 1.5 15 mm DKLO 1/2"4270-18-08-2 M 26 x 1.5 18 mm DKLO 1/2"4270-18-10-2 M 26 x 1.5 18 mm DKLO 5/8"4270-18-12 M 26 x 1.5 18 mm DKLO 3/4"4270-22-10-2 M 30 x 2.0 22 mm DKLO 5/8"4270-22-12-2 M 30 x 2.0 22 mm DKLO 3/4"4270-28-16-2 M 36 x 2.0 28 mm DKLO 1"4270-35-20-2 M 45 x 2.0 35 mm DKLO 1 1/4"4270-42-24-2 M 52 x 2.0 42 mm DKLO 1 1/2"

4271-06-03-2 M 12 x 1.5 6 mm DKLO 90° 3/16"4271-06-04 M 12 x 1.5 6 mm DKLO 90° 1/4"4271-08-03-2 M 14 x 1.5 8 mm DKLO 90° 3/16"4271-08-04-2 M 14 x 1.5 8 mm DKLO 90° 1/4"4271-10-04-2 M 16 x 1.5 10 mm DKLO 90° 1/4"4271-10-05-2 M 16 x 1.5 10 mm DKLO 90° 5/16"4271-10-06 M 16 x 1.5 10 mm DKLO 90° 3/8"4271-12-04-2 M 18 x 1.5 12 mm DKLO 90° 1/4"4271-12-05-2 M 18 x 1.5 12 mm DKLO 90° 5/16"4271-12-06-2 M 18 x 1.5 12 mm DKLO 90° 3/8"4271-15-06-2 M 22 x 1.5 15 mm DKLO 90° 3/8"4271-15-08-2 M 22 x 1.5 15 mm DKLO 90° 1/2"4271-18-08-2 M 26 x 1.5 18 mm DKLO 90° 1/2"4271-18-10-2 M 26 x 1.5 18 mm DKLO 90° 5/8"4271-18-12 M 26 x 1.5 18 mm DKLO 90° 3/4"4271-22-10-2 M 30 x 2.0 22 mm DKLO 90° 5/8"4271-22-12-2 M 30 x 2.0 22 mm DKLO 90° 3/4"4271-28-16-2 M 36 x 2.0 28 mm DKLO 90° 1"4271-35-20-2 M 45 x 2.0 35 mm DKLO 90° 1 1/4"4271-42-24-2 M 52 x 2.0 42 mm DKLO 90° 1 1/2"

TECHNiCAL iNfORMATiON ACCORDiNG TO SAE J518 CODE 61

Flange 1/2" 3/4" 1" 1 1/4" 1 1/2" 2"

WP MPa 34.5 34.5 34.5 27.6 20.7 20.7

TECHNiCAL iNfORMATiON ACCORDiNG TO SAE J518 CODE 62

Flange 1/2" 3/4" 1" 1 1/4" 1 1/2" 2"

WP MPa 41.4 41.4 41.4 41.4 41.4 41.4

TECHNiCAL iNfORMATiON SUPERCAT

Flange 1/2" 3/4" 1" 1 1/4" 1 1/2" 2"

WP MPa 41.4 41.4 41.4 41.4 41.4 41.4



4:2


SLiP-ON NUT



SLiP-ON NUT



SLiP-ON NUT


4220M-THREADED STRAiGHT

24° cone sealing

Part number Thread Pipe Type Hose ID Part number Thread Pipe Type Hose ID

Part number Thread Pipe Type Hose IDPart number Thread Pipe Type Hose ID

4272-06-03-2 M 12 x 1.5 6 mm DKLO 45° 3/16"4272-06-04 M 12 x 1.5 6 mm DKLO 45° 1/4"4272-08-03-2 M 14 x 1.5 8 mm DKLO 45° 3/16"4272-08-04-2 M 14 x 1.5 8 mm DKLO 45° 1/4"4272-10-04-2 M 16 x 1.5 10 mm DKLO 45° 1/4"4272-10-05-2 M 16 x 1.5 10 mm DKLO 45° 5/16"4272-10-06 M 16 x 1.5 10 mm DKLO 45° 3/8"4272-12-04-2 M 18 x 1.5 12 mm DKLO 45° 1/4"4272-12-05-2 M 18 x 1.5 12 mm DKLO 45° 5/16"4272-12-06-2 M 18 x 1.5 12 mm DKLO 45° 3/8"4272-15-06-2 M 22 x 1.5 15 mm DKLO 45° 3/8"4272-15-08-2 M 22 x 1.5 15 mm DKLO 45° 1/2"4272-18-08-2 M 26 x 1.5 18 mm DKLO 45° 1/2"4272-18-10-2 M 26 x 1.5 18 mm DKLO 45° 5/8"4272-18-12 M 26 x 1.5 18 mm DKLO 45° 3/4"4272-22-10-2 M 30 x 2.0 22 mm DKLO 45° 5/8"4272-22-12-2 M 30 x 2.0 22 mm DKLO 45° 3/4"4272-28-16-2 M 36 x 2.0 28 mm DKLO 45° 1"4272-35-20-2 M 45 x 2.0 35 mm DKLO 45° 1 1/4"4272-42-24-2 M 52 x 2.0 42 mm DKLO 45° 1 1/2"

4273-06-03-2 M 14 x 1.5 6 mm DKSO 3/16"4273-06-04 M 14 x 1.5 6 mm DKSO 1/4"4273-08-03-2 M 16 x 1.5 8 mm DKSO 3/16"4273-08-04-2 M 16 x 1.5 8 mm DKSO 1/4"4273-10-04-2 M 18 x 1.5 10 mm DKSO 1/4"4273-10-05-2 M 18 x 1.5 10 mm DKSO 5/16"4273-10-06 M 18 x 1.5 10 mm DKSO 3/8"4273-12-04-2 M 20 x 1.5 12 mm DKSO 1/4"4273-12-05-2 M 20 x 1.5 12 mm DKSO 5/16"4273-12-06-2 M 20 x 1.5 12 mm DKSO 3/8"4273-14-06-2 M 22 x 1.5 14 mm DKSO 3/8"4273-14-08-2 M 22 x 1.5 14 mm DKSO 1/2"4273-16-08-2 M 24 x 1.5 16 mm DKSO 1/2"4273-20-10-2 M 30 x 2.0 20 mm DKSO 5/8"4273-20-12-2 M 30 x 2.0 20 mm DKSO 3/4"4273-25-12-2 M 36 x 2.0 25 mm DKSO 3/4"4273-25-16-2 M 36 x 2.0 25 mm DKSO 1"4273-30-16-2 M 42 x 2.0 30 mm DKSO 1"4273-30-20-2 M 42 x 2.0 30 mm DKSO 1 1/4"4273-38-20-2 M 52 x 2.0 38 mm DKSO 1 1/4"4273-38-24-2 M 52 x 2.0 38 mm DKSO 1 1/2"

4274-06-03-2 M 14 x 1,5 6 mm DKSO 90° 3/16"4274-06-04 M 14 x 1,5 6 mm DKSO 90° 1/4"4274-08-03-2 M 16 x 1,5 8 mm DKSO 90° 3/16"4274-08-04-2 M 16 x 1,5 8 mm DKSO 90° 1/4"4274-10-04-2 M 18 x 1,5 10 mm DKSO 90° 1/4"4274-10-05-2 M 18 x 1,5 10 mm DKSO 90° 5/16"4274-10-06 M 18 x 1,5 10 mm DKSO 90° 3/8"4274-12-04-2 M 20 x 1,5 12 mm DKSO 90° 1/4"4274-12-05-2 M 20 x 1,5 12 mm DKSO 90° 5/16"4274-12-06-2 M 20 x 1,5 12 mm DKSO 90° 3/8"4274-14-06-2 M 22 x 1,5 14 mm DKSO 90° 3/8"4274-14-08-2 M 22 x 1,5 14 mm DKSO 90° 1/2"4274-16-08-2 M 24 x 1,5 16 mm DKSO 90° 1/2"4274-20-10-2 M 30 x 2,0 20 mm DKSO 90° 5/8"4274-20-12-2 M 30 x 2,0 20 mm DKSO 90° 3/4"4274-25-12-2 M 36 x 2,0 25 mm DKSO 90° 3/4"4274-25-16-2 M 36 x 2,0 25 mm DKSO 90° 1"4274-30-16-2 M 42 x 2,0 30 mm DKSO 90° 1"4274-30-20-2 M 42 x 2,0 30 mm DKSO 90° 1 1/4"4274-38-20-2 M 52 x 2,0 38 mm DKSO 90° 1 1/4"4274-38-24-2 M 52 x 2,0 38 mm DKSO 90° 1 1/2"

4220-12-03 M 12 x 1,5 6 mm SKL 3/16"4220-12-04 M 12 x 1,5 6 mm SKL 1/4"4220-14-03 M 14 x 1,5 8 mm SKL 3/16"4220-14-04 M 14 x 1,5 8 mm SKL 1/4"4220-16-04 M 16 x 1,5 10 mm SKL 1/4"4220-16-05 M 16 x 1,5 10 mm SKL 5/16"4220-16-06 M 16 x 1,5 10 mm SKL 3/8"4220-18-04 M 18 x 1,5 12 mm SKL 1/4"4220-18-05 M 18 x 1,5 12 mm SKL 5/16"4220-18-06 M 18 x 1,5 12 mm SKL 3/8"4220-22-06 M 22 x 1,5 15 mm SKL 3/8"4220-22-08 M 22 x 1,5 15 mm SKL 1/2"4220-26-08 M 26 x 1,5 18 mm SKL 1/2"4220-26-10 M 26 x 1,5 18 mm SKL 5/8"4220-26-12 M 26 x 1,5 18 mm SKL 3/4"4220-30-10 M 30 x 2,0 22 mm SKL 5/8"4220-30-12 M 30 x 2,0 22 mm SKL 3/4"4220-36-16 M 36 x 2,0 28 mm SKL 1"4220-45-20 M 45 x 2,0 35 mm SKL 1 1/4"4220-52-24 M 52 x 2,0 42 mm SKL 1 1/2"




SLiP-ON NUT


4226STAND PiPE STRAiGHT


24° cone sealing

Part number Thread Pipe Type Hose ID Part number Pipe Ø Type Hose ID


4275-06-03-2 M 14 x 1.5 6 mm DKSO 45° 3/16"4275-06-04 M 14 x 1.5 6 mm DKSO 45° 1/4"4275-08-03-2 M 16 x 1.5 8 mm DKSO 45° 3/16"4275-08-04-2 M 16 x 1.5 8 mm DKSO 45° 1/4"4275-10-04-2 M 18 x 1.5 10 mm DKSO 45° 1/4"4275-10-05-2 M 18 x 1.5 10 mm DKSO 45° 5/16"4275-10-06 M 18 x 1.5 10 mm DKSO 45° 3/8"4275-12-04-2 M 20 x 1.5 12 mm DKSO 45° 1/4"4275-12-05-2 M 20 x 1.5 12 mm DKSO 45° 5/16"4275-12-06-2 M 20 x 1.5 12 mm DKSO 45° 3/8"4275-14-06-2 M 22 x 1.5 14 mm DKSO 45° 3/8"4275-14-08-2 M 22 x 1.5 14 mm DKSO 45° 1/2"4275-16-08-2 M 24 x 1.5 16 mm DKSO 45° 1/2"4275-20-10-2 M 30 x 2.0 20 mm DKSO 45° 5/8"4275-20-12-2 M 30 x 2.0 20 mm DKSO 45° 3/4"4275-25-12-2 M 36 x 2.0 25 mm DKSO 45° 3/4"4275-25-16-2 M 36 x 2.0 25 mm DKSO 45° 1"4275-30-16-2 M 42 x 2.0 30 mm DKSO 45° 1"4275-30-20-2 M 42 x 2.0 30 mm DKSO 45° 1 1/4"4275-38-20-2 M 52 x 2.0 38 mm DKSO 45° 1 1/4"4275-38-24-2 M 52 x 2.0 38 mm DKSO 45° 1 1/2"

4226-06-03 6 mm SP 3/16"4226-06-04 6 mm SP 1/4"4226-08-03 8 mm SP 3/16"4226-08-04 8 mm SP 1/4"4226-10-04 10 mm SP 1/4"4226-10-05 10 mm SP 5/16"4226-10-06 10 mm SP 3/8"4226-12-04 12 mm SP 1/4"4226-12-05 12 mm SP 5/16"4226-12-06 12 mm SP 3/8"4226-14-06 14 mm SP 3/8"4226-14-08 14 mm SP 1/2"4226-15-06 15 mm SP 3/8"4226-15-08 15 mm SP 1/2"4226-16-08 16 mm SP 1/2"4226-18-08 18 mm SP 1/2"4226-18-10 18 mm SP 5/8"4226-18-12 18 mm SP 3/4"4226-20-10 20 mm SP 5/8"4226-22-10 22 mm SP 5/8"4226-20-12 20 mm SP 3/4"4226-22-12 22 mm SP 3/4"4226-25-12 25 mm SP 3/4"4226-25-16 25 mm SP 1"4226-28-16 28 mm SP 1"4226-30-16 30 mm SP 1"4226-30-20 30 mm SP 1 1/4"4226-35-20 35 mm SP 1 1/4"4226-38-20 38 mm SP 1 1/4"4226-38-24 38 mm SP 1 1/2"4226-42-24 42 mm SP 1 1/2"4223-14-03 M 14 x 1,5 6 mm SKS 3/16"

4223-14-04 M 14 x 1,5 6 mm SKS 1/4"4223-16-03 M 16 x 1,5 8 mm SKS 3/16"4223-16-04 M 16 x 1,5 8 mm SKS 1/4"4223-18-04 M 18 x 1,5 10 mm SKS 1/4"4223-18-05 M 18 x 1,5 10 mm SKS 5/16"4223-18-06 M 18 x 1,5 10 mm SKS 3/8"4223-20-04 M 20 x 1,5 12 mm SKS 1/4"4223-20-05 M 20 x 1,5 12 mm SKS 5/16"4223-20-06 M 20 x 1,5 12 mm SKS 3/8"4223-22-06 M 22 x 1,5 14 mm SKS 3/8"4223-22-08 M 22 x 1,5 14 mm SKS 1/2"4223-24-08 M 24 x 1,5 16 mm SKS 1/2"4223-30-10 M 30 x 2,0 20 mm SKS 5/8"4223-30-12 M 30 x 2,0 20 mm SKS 3/4"4223-36-12 M 36 x 2,0 25 mm SKS 3/4"4223-36-16 M 36 x 2,0 25 mm SKS 1"4223-42-16 M 42 x 2,0 30 mm SKS 1"4223-42-20 M 42 x 2,0 30 mm SKS 1 1/4"4223-52-20 M 52 x 2,0 38 mm SKS 1 1/4"4223-52-24 M 52 x 2,0 38 mm SKS 1 1/2"



4:2

4227STAND PiPE 90° bEND

4228STAND PiPE 45° bEND

4280bSP bANJO

4280-01bANJO bOLT fOR bSP bANJO

Part number Pipe Ø Type Hose ID Part number Pipe Ø Type Hose ID

Part number Bolt thread Type Hose ID Height

Part number Thread Type Length

4227-06-03 6 mm SP 90° 3/16"4227-06-04 6 mm SP 90° 1/4"4227-08-03 8 mm SP 90° 3/16"4227-08-04 8 mm SP 90° 1/4"4227-10-04 10 mm SP 90° 1/4"4227-10-05 10 mm SP 90° 5/16"4227-10-06 10 mm SP 90° 3/8"4227-12-04 12 mm SP 90° 1/4"4227-12-05 12 mm SP 90° 5/16"4227-12-06 12 mm SP 90° 3/8"4227-14-06 14 mm SP 90° 3/8"4227-14-08 14 mm SP 90° 1/2"4227-15-06 15 mm SP 90° 3/8"4227-15-08 15 mm SP 90° 1/2"4227-16-08 16 mm SP 90° 1/2"4227-18-08 18 mm SP 90° 1/2"4227-18-10 18 mm SP 90° 5/8"4227-18-12 18 mm SP 90° 3/4"4227-20-10 20 mm SP 90° 5/8"4227-20-12 20 mm SP 90° 3/4"4227-22-10 22 mm SP 90° 5/8"4227-22-12 22 mm SP 90° 3/4"4227-25-12 25 mm SP 90° 3/4"4227-25-16 25 mm SP 90° 1"4227-28-16 28 mm SP 90° 1"4227-30-16 30 mm SP 90° 1"4227-30-20 30 mm SP 90° 1 1/4"4227-35-20 35 mm SP 90° 1 1/4"4227-38-20 38 mm SP 90° 1 1/4"4227-38-24 38 mm SP 90° 1 1/2"4227-42-24 42 mm SP 90° 1 1/2"

4228-06-03 6 mm SP 45° 3/16"4228-06-04 6 mm SP 45° 1/4"4228-08-03 8 mm SP 45° 3/16"4228-08-04 8 mm SP 45° 1/4"4228-10-04 10 mm SP 45° 1/4"4228-10-05 10 mm SP 45° 5/16"4228-10-06 10 mm SP 45° 3/8"4228-12-04 12 mm SP 45° 1/4"4228-12-05 12 mm SP 45° 5/16"4228-12-06 12 mm SP 45° 3/8"4228-14-06 14 mm SP 45° 3/8"4228-14-08 14 mm SP 45° 1/2"4228-15-06 15 mm SP 45° 3/8"4228-15-08 15 mm SP 45° 1/2"4228-16-08 16 mm SP 45° 1/2"4228-18-08 18 mm SP 45° 1/2"4228-18-10 18 mm SP 45° 5/8"4228-18-12 18 mm SP 45° 3/4"4228-20-10 20 mm SP 45° 5/8"4228-20-12 20 mm SP 45° 3/4"4228-22-10 22 mm SP 45° 5/8"4228-22-12 22 mm SP 45° 3/4"4228-25-12 25 mm SP 45° 3/4"4228-25-16 25 mm SP 45° 1"4228-28-16 28 mm SP 45° 1"4228-30-16 30 mm SP 45° 1"4228-30-20 30 mm SP 45° 1 1/4"4228-35-20 35 mm SP 45° 1 1/4"4228-38-20 38 mm SP 45° 1 1/4"4228-38-24 38 mm SP 45° 1 1/2"4228-42-24 42 mm SP 45° 1 1/2"

4280-02-03 G 1/8" Banjo 3/16" 10.0 mm4280-02-04 G 1/8" Banjo 1/4" 10.0 mm4280-04-03 G 1/4" Banjo 3/16" 14.5 mm4280-04-04 G 1/4" Banjo 1/4" 14.5 mm4280-04-05 G 1/4" Banjo 5/16" 14.5 mm4280-04-06 G 1/4" Banjo 3/8" 14.5 mm4280-06-04 G 3/8" Banjo 1/4" 17.0 mm4280-06-05 G 3/8" Banjo 5/16" 17.0 mm4280-06-06 G 3/8" Banjo 3/8" 17.0 mm4280-06-08 G 3/8" Banjo 1/2" 17.0 mm4280-08-04 G 1/2" Banjo 1/4" 23.5 mm4280-08-06 G 1/2" Banjo 3/8" 22.0 mm4280-08-08 G 1/2" Banjo 1/2" 22.0 mm4280-10-08 G 5/8" Banjo 1/2" 25.0 mm4280-10-10 G 5/8" Banjo 5/8" 25.0 mm4280-12-08 G 3/4" Banjo 1/2" 30.0 mm4280-12-10 G 3/4" Banjo 5/8" 30.0 mm4280-12-12 G 3/4" Banjo 3/4" 29.0 mm4280-16-16 G 1" Banjo 1" 38.0 mm

4280-01-02 G 1/8" Banjo bolt 19 mm4280-01-04 G 1/4" Banjo bolt 29 mm4280-01-06 G 3/8" Banjo bolt 33 mm4280-01-08 G 1/2" Banjo bolt 38 mm4280-01-10 G 5/8" Banjo bolt 44 mm4280-01-12 G 3/4" Banjo bolt 47 mm4280-01-16 G 1" Banjo bolt 58 mm



4281-01bANJO bOLT, DOUbLE

fOR bSP bANJO

4282-01bANJO bOLT

fOR METRiC bANJO

4282METRiC bANJO


STRAiGHT, CRiMPED NUT

ORFS sealing

4290~2UNifiED-THREADED

STRAiGHT, SLiP-ON NUT

ORFS sealing



4281-01-04 G 1/4" Banjo bolt, double 43 mm4281-01-06 G 3/8" Banjo bolt, double 49 mm4281-01-08 G 1/2" Banjo bolt, double 64 mm

4282-01-10 M 10x1.0 Banjo bolt 19.3 mm4282-01-12 M 12x1.5 Banjo bolt 25.7 mm4282-01-14 M 14x1.5 Banjo bolt 28.5 mm4282-01-16 M 16x1.5 Banjo bolt 33.0 mm4282-01-18 M 18x1.5 Banjo bolt 36.5 mm4282-01-20 M 20x1.5 Banjo bolt 39.5 mm4282-01-22 M 22x1.5 Banjo bolt 38.3 mm4282-01-26 M 26x1.5 Banjo bolt 47.0 mm4282-01-30 M 30x1.5 Banjo bolt 58.0 mm

Part number Bolt thread Type Hose ID Height



4282-10-04 M 10 x 1 Banjo 1/4" 10.0 mm4282-12-03 M 12 x 1.5 Banjo 3/16" 12.0 mm4282-12-04 M 12 x 1.5 Banjo 1/4" 12.0 mm4282-12-05 M 12 x 1.5 Banjo 5/16" 12.0 mm4282-14-03 M 14 x 1.5 Banjo 3/16" 14.0 mm4282-14-04 M 14 x 1.5 Banjo 1/4" 14.0 mm4282-14-05 M 14 x 1.5 Banjo 5/16" 14.0 mm4282-14-06 M 14 x 1.5 Banjo 3/8" 14.0 mm4282-16-04 M 16 x 1.5 Banjo 1/4" 16.5 mm4282-16-05 M 16 x 1.5 Banjo 5/16" 16.5 mm4282-16-06 M 16 x 1.5 Banjo 3/8" 16.5 mm4282-18-04 M 18 x 1.5 Banjo 1/4" 20.5 mm4282-18-05 M 18 x 1.5 Banjo 5/16" 20.5 mm4282-18-06 M 18 x 1.5 Banjo 3/8" 20.5 mm4282-18-08 M 18 x 1.5 Banjo 1/2" 20.5 mm4282-20-06 M 20 x 1.5 Banjo 3/8" 23.5 mm4282-20-08 M 20 x 1.5 Banjo 1/2" 23.5 mm4282-22-06 M 22 x 1.5 Banjo 3/8" 23.5 mm4282-22-08 M 22 x 1.5 Banjo 1/2" 23.5 mm4282-22-10 M 22 x 1.5 Banjo 5/8" 23.5 mm4282-26-12 M 26 x 1.5 Banjo 3/4" 30.0 mm4282-30-12 M 30 x 1.5 Banjo 3/4" 36.0 mm4282-30-16 M 30 x 1.5 Banjo 1" 36.0 mm

4290-04-04* 9/16"-18 UNF ORFS FS 1/4"4290-04-06 9/16"-18 UNF ORFS FS 3/8"4290-06-04 11/16"-16 UN ORFS FS 1/4"4290-06-06* 11/16"-16 UN ORFS FS 3/8"4290-08-06 13/16"-16 UN ORFS FS 3/8"4290-08-08* 13/16"-16 UN ORFS FS 1/2"4290-10-08 1"-14 UNS ORFS FS 1/2"4290-10-10* 1"-14 UNS ORFS FS 5/8"4290-12-08 1 3/16"-12 UN ORFS FS 1/2"4290-12-12* 1 3/16"-12 UN ORFS FS 3/4"4290-16-12 1 7/16"-12 UN ORFS FS 3/4"4290-16-16* 1 7/16"-12 UN ORFS FS 1"4290-20-20 1 11/16"-12 UN ORFS FS 1 1/4"4290-24-24 2"-12 UN ORFS FS 1 1/2"

4290-04-04-2 9/16"-18 UNF ORFS FS 1/4"4290-06-04-2 11/16"-16 UN ORFS FS 1/4"4290-06-05-2 11/16"-16 UN ORFS FS 5/16"4290-06-06-2 11/16"-16 UN ORFS FS 3/8"4290-08-06-2 13/16"-16 UN ORFS FS 3/8"4290-08-08-2 13/16"-16 UN ORFS FS 1/2"4290-10-08-2 1"-14 UNS ORFS FS 1/2"4290-10-10-2 1"-14 UNS ORFS FS 5/8"4290-12-08-2 1 3/16"-12 UN ORFS FS 1/2"4290-12-10-2 1 3/16"-12 UN ORFS FS 5/8"4290-12-12-2 1 3/16"-12 UN ORFS FS 3/4"4290-16-12-2 1 7/16"-12 UN ORFS FS 3/4"4290-16-16-2 1 7/16"-12 UN ORFS FS 1"4290-20-20-2 1 11/16"-12 UN ORFS FS 1 1/4"4290-24-24-2 2"-12 UN ORFS FS 1 1/2"

* Double-hexagonal



4:2


90° bEND, CRiMPED NUT

ORFS sealing


45° bEND, CRiMPED NUT

ORFS sealing


45° bEND, SLiP-ON NUT

ORFS sealing


90° bEND, SLiP-ON NUT

ORFS sealing

4291~7UNifiED-THREADED 90°

SHORT bEND, SLiP-ON NUT

ISO 12151-1 – ORFS sealing


Part number Thread Type Hose IDPart number Thread Type Hose ID


4291-04-04 9/16"-18 UNF ORFS 90° FS 1/4"4291-06-06 11/16"-16 UN ORFS 90° FS 3/8"4291-06-08 11/16"-16 UN ORFS 90° FS 1/2"4291-08-08 13/16"-16 UN ORFS 90° FS 1/2"4291-10-08 1"-14 UNS ORFS 90° FS 1/2"4291-10-10 1"-14 UNS ORFS 90° FS 5/8"4291-12-12 1 3/16"-12 UN ORFS 90° FS 3/4"4291-16-16 1 7/16"-12 UN ORFS 90° FS 1"4291-20-20 1 11/16"-12 UN ORFS 90° FS 1 1/4"4291-24-24 2"-12 UN ORFS 90° FS 1 1/2"

4292-04-04 9/16"-18 UNF ORFS 45° FS 1/4"4292-06-04 11/16"-16 UN ORFS 45° FS 1/4"4292-06-06 11/16"-16 UN ORFS 45° FS 3/8"4292-08-08 13/16"-16 UN ORFS 45° FS 1/2"4292-10-10 1"-14 UNS ORFS 45° FS 5/8"4292-12-12 1 3/16"-12 UN ORFS 45° FS 3/4"4292-16-12 1 7/16"-12 UN ORFS 45° FS 3/4"4292-16-16 1 7/16"-12 UN ORFS 45° FS 1"4292-20-20 1 11/16"-12 UN ORFS 45° FS 1 1/4"4292-24-24 2"-12 UN ORFS 45° FS 1 1/2"

4292-04-04-2 9/16"-18 UNF ORFS 45° FS 1/4"4292-06-04-2 11/16"-16 UN ORFS 45° FS 1/4"4292-06-05-2 11/16"-16 UN ORFS 45° FS 5/16"4292-06-06-2 11/16"-16 UN ORFS 45° FS 3/8"4292-08-06-2 13/16"-16 UN ORFS 45° FS 3/8"4292-08-08-2 13/16"-16 UN ORFS 45° FS 1/2"4292-10-08-2 1"-14 UNS ORFS 45° FS 1/2"4292-10-10-2 1"-14 UNS ORFS 45° FS 5/8"4292-12-08-2 1 3/16"-12 UN ORFS 45° FS 1/2"4292-12-10-2 1 3/16"-12 UN ORFS 45° FS 5/8"4292-12-12-2 1 3/16"-12 UN ORFS 45° FS 3/4"4292-16-12-2 1 7/16"-12 UN ORFS 45° FS 3/4"4292-16-16-2 1 7/16"-12 UN ORFS 45° FS 1"4292-20-20-2 1 11/16"-12 UN ORFS 45° FS 1 1/4"4292-24-24-2 2"-12 UN ORFS 45° FS 1 1/2"

4291-04-04-2 9/16"-18 UNF ORFS 90° FS 1/4"4291-06-04-2 11/16"-16 UN ORFS 90° FS 1/4"4291-06-05-2 11/16"-16 UN ORFS 90° FS 5/16"4291-06-06-2 11/16"-16 UN ORFS 90° FS 3/8"4291-08-06-2 13/16"-16 UN ORFS 90° FS 3/8"4291-08-08-2 13/16"-16 UN ORFS 90° FS 1/2"4291-10-08-2 1"-14 UNS ORFS 90° FS 1/2"4291-10-10-2 1"-14 UNS ORFS 90° FS 5/8"4291-12-08-2 1 3/16"-12 UN ORFS 90° FS 1/2"4291-12-10-2 1 3/16"-12 UN ORFS 90° FS 5/8"4291-12-12-2 1 3/16"-12 UN ORFS 90° FS 3/4"4291-16-12-2 1 7/16"-12 UN ORFS 90° FS 3/4"4291-16-16-2 1 7/16"-12 UN ORFS 90° FS 1"4291-20-20-2 1 11/16"-12 UN ORFS 90° FS 1 1/4"4291-24-24-2 2"-12 UN ORFS 90° FS 1 1/2"

4291-04-04-7 9/16"-18 UNF ORFS 90° S FS 1/4"4291-06-06-7 11/16"-16 UN ORFS 90° S FS 3/8"4291-08-04-7 13/16"-16 UN ORFS 90° S FS 1/4"4291-08-08-7 13/16"-16 UN ORFS 90° S FS 1/2"4291-10-10-7 1"-14 UNS ORFS 90° S FS 5/8"4291-12-12-7 1 3/16"-12 UN ORFS 90° S FS 3/4"4291-16-16-7 1 7/16"-12 UN ORFS 90° S FS 1"




STRAiGHT

ORFS sealing

4284M-THREADED STRAiGHT,

CRiMPED NUT

Japanese standard “Komatsu" 60°cone


4295-04-04 9/16"-18 UNF ORFS M 1/4"4295-06-04 11/16"-16 UN ORFS M 1/4"4295-06-05 11/16"-16 UN ORFS M 5/16"4295-06-06 11/16"-16 UN ORFS M 3/8"4295-08-06 13/16"-16 UN ORFS M 3/8"4295-08-08 13/16"-16 UN ORFS M 1/2"4295-10-06 1"-14 UNS ORFS M 3/8"4295-10-08 1"-14 UNS ORFS M 1/2"4295-10-10 1"-14 UNS ORFS M 5/8"4295-12-08 1 3/16"-12 UN ORFS M 1/2"4295-12-10 1 3/16"-12 UN ORFS M 5/8"4295-12-12 1 3/16"-12 UN ORFS M 3/4"4295-16-12 1 7/16"-12 UN ORFS M 3/4"4295-16-16 1 7/16"-12 UN ORFS M 1"4295-20-20 1 11/16"-12 UN ORFS M 1 1/4"4295-24-24 2"-12 UN ORFS M 1 1/2"

4284-14-04 M 14 x 1.5 JIS FS 1/4"4284-14-06 M 14 x 1.5 JIS FS 3/8"4284-16-05 M 16 x 1.5 JIS FS 5/16"4284-16-06 M 16 x 1.5 JIS FS 3/8"4284-18-06 M 18 x 1.5 JIS FS 3/8"4284-22-08 M 22 x 1.5 JIS FS 1/2"4284-24-08 M 24 x 1.5 JIS FS 1/2"4284-24-10 M 24 x 1.5 JIS FS 5/8"4284-30-12 M 30 x 1.5 JIS FS 3/4"4284-33-16 M 33 x 1.5 JIS FS 1"4284-36-20 M 36 x 1.5 JIS FS 1 1/4"4284-42-24 M 42 x 1.5 JIS FS 1 1/2"

4276STiCkO

Part number Type Hose ID

4276-04-04 1/4" Sticko 1/4"4276-06-06 3/8" Sticko 3/8"4276-08-08 1/2" Sticko 1/2"4276-12-12 3/4" Sticko 3/4"4276-16-16 1" Sticko 1"4276-20-20 1 1/4" Sticko 1 1/4"

4277HOSE JOiNT

Part number Hose ID Type Hose ID

4277-04-04 1/4" Hose joint 1/4"4277-05-05 5/16" Hose joint 5/16"4277-06-06 3/8" Hose joint 3/8"4277-08-08 1/2" Hose joint 1/2"


CRiMPED NUT

Japanese standard “Toyota" 60°cone


4287-04-04 G 1/4" JIS FS 1/4"4287-06-06 G 3/8" JIS FS 3/8"4287-08-08 G 1/2" JIS FS 1/2"4287-12-12 G 3/4" JIS FS 3/4"4287-16-16 G 1" JIS FS 1"4287-20-20 G 1 1/4" JIS FS 1 1/4"4287-24-24 G 1 1/2" JIS FS 1 1/2"


Kobelco 24° cone, connection for mm-pipes


4231-30-10 M 30 x 1.5 22 mm Kobelco 5/8"4231-36-12 M 36 x 1.5 28 mm Kobelco 3/4"4231-36-16 M 36 x 1.5 28 mm Kobelco 1"4231-45-16 M 45 x 1.5 35 mm Kobelco 1"



4:2

4373DkSO SPECiAL

High pressure washer

4374HANDLE fiTTiNG

High pressure washer



4373-14-04 M 22 x 1.5 HPW FS 1/4"4373-14-05 M 22 x 1.5 HPW FS 5/16"4373-14-06 M 22 x 1.5 HPW FS 3/8"

4374-00-04 HPW M 1/4"4374-00-05 HPW M 5/16"


SLiP-ON NUT

Multiseal


4233-06-03-2 M 12 x 1.5 6 mm MS FS 3/16"4233-08-04-2 M 14 x 1.5 8 mm MS FS 1/4"4233-10-04-2 M 16 x 1.5 10 mm MS FS 1/4"4233-10-05-2 M 16 x 1.5 10 mm MS FS 5/16"4233-12-05-2 M 18 x 1.5 12 mm MS FS 5/16"4233-12-06-2 M 18 x 1.5 12 mm MS FS 3/8"4233-15-06-2 M 22 x 1.5 15 mm MS FS 3/8"4233-15-08-2 M 22 x 1.5 15 mm MS FS 1/2"4233-18-10-2 M 26 x 1.5 18 mm MS FS 5/8"

4221M-THREADED STRAiGHT,

SLiP-ON NUT

“French type" 24° cone, connection for inch-pipes


4221-20-06 M 20 x 1.5 13.25 mm M 3/8"4221-30-10 M 30 x 1.5 21.25 mm M 5/8"4221-30-12 M 30 x 1.5 21.25 mm M 3/4"4221-36-12 M 36 x 1.5 21.25 mm M 3/4"4221-45-16 M 45 x 1.5 33.70 mm M 1"


SLiP-ON NUT

“French type" 24° cone, connection for inch-pipes


4224-20-06-2 M 20 x 1.5 13.25 mm FS 3/8"4224-24-08-2 M 24 x 1.5 16.75 mm FS 1/2"4224-30-12-2 M 30 x 1.5 21.25 mm FS 3/4"4224-36-12-2 M 36 x 1.5 21.25 mm FS 3/4"4224-45-16-2 M 45 x 1.5 33.70 mm FS 1"


SLiP-ON NUT

Multiseal


4234-08-04-2 M 14 x 1.5 8 mm MS 90° FS 1/4"4234-10-04-2 M 16 x 1.5 10 mm MS 90° FS 1/4"4234-10-05-2 M 16 x 1.5 10 mm MS 90° FS 5/16"4234-12-06-2 M 18 x 1.5 12 mm MS 90° FS 3/8"4234-15-06-2 M 22 x 1.5 15 mm MS 90° FS 3/8"4234-15-08-2 M 22 x 1.5 15 mm MS 90° FS 1/2"4234-18-10-2 M 26 x 1.5 18 mm MS 90° FS 5/8"


SLiP-ON NUT

Multiseal


4235-08-04-2 M 14 x 1.5 8 mm MS 45° FS 1/4"4235-10-04-2 M 16 x 1.5 10 mm MS 45° FS 1/4"4235-10-05-2 M 16 x 1.5 10 mm MS 45° FS 5/16"4235-12-06-2 M 18 x 1.5 12 mm MS 45° FS 3/8"4235-15-08-2 M 22 x 1.5 15 mm MS 45° FS 1/2"



3C14 710PLUG-iN fiTTiNG STRAiGHT

1SN/2SN hose

3C14 712PLUG-iN fiTTiNG 45° bEND

1SN/2SN hose

3C14 714PLUG-iN fiTTiNG 90° bEND

1SN/2SN hose

3C14 748RELEASE RiNG

3C14 749ASSEMbLY STOP

Part number Description Hose ID



Part number Description No./Package


3C147100404 1/4" Plug-in Straight 1/4"3C147100604 3/8" Plug-in Straight 1/4"3C147100605 3/8" Plug-in Straight 5/16"3C147100606 3/8" Plug-in Straight 3/8"3C147100806 1/2" Plug-in Straight 3/8"3C147100808 1/2" Plug-in Straight 1/2"3C147101208 3/4" Plug-in Straight 1/2"3C147101210 3/4" Plug-in Straight 5/8"3C147101212 3/4" Plug-in Straight 3/4"3C147101616 1" Plug-in Straight 1"3C147111212 3/4" Plug-in Straight, R9R-hose 3/4"3C147111616 1" Plug-in Straight, R9R-hose 1"

3C147120404 1/4" Plug-in 45° 1/4"3C147120604 3/8" Plug-in 45° 1/4"3C147120605 3/8" Plug-in 45° 5/16"3C147120606 3/8" Plug-in 45° 3/8"3C147120806 1/2" Plug-in 45° 3/8"3C147120808 1/2" Plug-in 45° 1/2"3C147121208 3/4" Plug-in 45° 1/2"3C147121210 3/4" Plug-in 45° 5/8"3C147121212 3/4" Plug-in 45° 3/4"3C147131212 3/4" Plug-in 45° R9R-hose 3/4"

3C147140404 1/4" Plug-in 90° 1/4"3C147140604 3/8" Plug-in 90° 1/4"3C147140605 3/8" Plug-in 90° 5/16"3C147140606 3/8" Plug-in 90° 3/8"3C147140806 1/2" Plug-in 90° 3/8"3C147140808 1/2" Plug-in 90° 1/2"3C147141208 3/4" Plug-in 90° 1/2"3C147141210 3/4" Plug-in 90° 5/8"3C147141212 3/4" Plug-in 90° 3/4"3C147151212 3/4" Plug-in 90° R9R-hose 3/4"

3C147480400 1/4" Release ring 103C147480600 3/8" Release ring 103C147480800 1/2" Release ring 103C147481200 3/4" Release ring 103C147481600 1" Release ring 10

3C147490400 1/4" Assembly stop 103C147490600 3/8" Assembly stop 103C147490800 1/2" Assembly stop 103C147491200 3/4" Assembly stop 103C147491600 1" Assembly stop 10


4:4

HYDROSCAND INTERLOCk FITTINGS

INTERLOCk FITTINGS

PRODUCT GROUP 440

Interlock fittings are used for multispiral hoses: Gammaflex 5, Deltaflex, IsoBar 35 and IsoBar 42.

The principle of the interlock fitting is that the hose is skived both internally and externally in order to create two zones: one locking and one sealing. The locking is created in the front of the fitting, where nipple and ferrule are swaged together with the reinforcement of the hose.

The back of the fitting is the sealing part; the sealing part is created between nipple and inner tube.

The interlock fitting is recommended for hydraulic systems with very high pulsating pressure and requirements of safety.

Remember that a good assembly requires precise handling.

The assembly should be done at a Hydroscand depot or an authorised franchisee according to the assembling instructions on the following page.


Inner skiving

Inner skiving for safe assembling.

FERRULES PAGE

G-THREADED FITTINGS PAGE

UNIFIED-THREADED FITTINGS PAGE

M-THREADED FITTINGS PAGE

CONE FITTINGS PAGE

SAE FLANGES PAGE

ORFS FITTINGS PAGE

BLASTOPAk & HYDRAULIC HAMMER PAGE

TABLE OF CONTENTS

4400-09 Ferrule 1354500-10 Ferrule 139 4500-11 Ferrule 139

4401 G-threaded straight,thrust-wired nut 1354402 G-threaded straight 1354403 G-threaded 90° bend, thrust-wired nut 1354404 G-threaded 45° bend, thrust-wired nut 135

4413 Unified-threaded straight, thrust-wired nut 1354414 Unified-threaded straight 1354416 Unified-threaded 90° bend, thrust-wired nut 1354417 Unified-threaded 45° bend, thrust-wired nut 136

4423 M-threaded straight 1364473 M-threaded straight, slip-on nut 1384474 M-threaded 90° bend, slip-on nut 1384475 M-threaded 45° bend, slip-on nut 138

4440 NPTF-threaded straight 136

4443 SAE Flange straight 1364444 SAE Flange 90° bend 1364448 SAE Flange 45° bend 1364453 SAE Flange straight 1364454 SAE Flange 90° bend 1374458 SAE Flange 45° bend 1374460 SAE Flange 90° bend, long 1374461 SAE Flange 45° bend, long 1374463 Supercat Flange straight 1374464 Supercat Flange 90° bend 1374468 Supercat Flange 45° bend 137

4490 Unified-threaded straight, slip-on nut 1384491 Unified-threaded 90° bend, slip-on nut 1384492 Unified-threaded 45° bend, slip-on nut 138

4501 G-threaded straight, thrust-wired nut 1394507 G-threaded straight, thrust-wired nut 1394508 G-threaded straight 1394573 M-threaded straight, slip-on nut 1394576 M-threaded straight, slip-on nut 139

HYDROSCAND INTERLOCk FITTINGS PRODUCT GROUP 440


ASSEMBLING INSTRUCTIONS

2. Skive the hose down to the steel wire. The skiving length "L" and "I" is noted in the Swaging Manual. Be careful not to damage the steel wire when skiving. Clean the hose bore from dirt and particles.

1. Cut the hose transversely. Remember that all fit-tings have a cut-off length "A".

3. Push the ferrule onto the hose until it stops. Lubri-cate the insert and push it into the hose until the stop "B" meets the hose end.

4. Swage the ferrule’s full length with the given swage diameter +2 mm.

Move the hose so that 2/3 of the ferrule ("b") gets swaged and the collapse is behind the area where the hose is skived. (The front part where the hose is skived internally is now less swaged).

Then swage the front part using the same swage diameter ("c"). If the ferrule is swaged at once, the collapse might occur at the wrong spot and the hose part becomes under-swaged.

5. Make sure that the correct internal collapse (see the Swaging Manual) has been achieved by using the Hydroscand control pin (9013-xx-xx). The GO side should pass into the fitting to make sure the swaging is not overdone. The STOP side, on the other hand, should not be able to pass to make sure the swaging is not underdone. Please note that on these fittings the STOP side should stop at the interlock!

NOTE! It is important to use hoses and fittings that are adjusted to fit together. Our hoses and fittings have been tested for a perfect fit.

B

A

b

STOP GO

LI

c

PRODUCT GROUP 440 HYDROSCAND INTERLOCk FITTINGS


4:4

4414UNIFIED-THREADED

STRAIGHT

74° cone sealing

4414-17-12 1 1/16" - 12 UN JIC M ITL 3/4"4414-21-16 1 5/16" - 12 UN JIC M ITL 1"4414-26-20 1 5/8" - 12 UN JIC M ITL 1 1/4"4414-30-24 1 7/8" - 12 UN JIC M ITL 1 1/2"4414-40-32 2 1/2" - 12 UN JIC M ITL 2"

4416UNIFIED-THREADED 90° BEND,

THRUST-wIRED NUT

74° cone sealing


4400-09/11/13/14FERRULE

Deltaflex/4SH/R13/R15/R35/R42

4401G-THREADED STRAIGHT,

THRUST-wIRED NUT

60° cone sealing

4401-12-12 G 3/4" FS ITL 3/4"4401-16-16 G 1" FS ITL 1"4401-20-20 G 1 1/4" FS ITL 1 1/4"4401-24-24 G 1 1/2" FS ITL 1 1/2"4401-32-32 G 2" FS ITL 2"

4402G-THREADED STRAIGHT

60° cone sealing

4402-12-12 G 3/4" M ITL 3/4"4402-16-16 G 1" M ITL 1"4402-20-20 G 1 1/4" M ITL 1 1/4"4402-24-24 G 1 1/2" M ITL 1 1/2"4402-32-32 G 2" M ITL 2"

4403G-THREADED 90° BEND,

THRUST-wIRED NUT

60° cone sealing



4403-12-12 G 3/4" 90° ITL 3/4"4403-16-16 G 1" 90° ITL 1"4403-20-20 G 1 1/4" 90° ITL 1 1/4"4403-24-24 G 1 1/2" 90° ITL 1 1/2"4403-32-32 G 2" 90° ITL 2"

4404-12-12 G 3/4" 45° ITL 3/4"4404-16-16 G 1" 45° ITL 1"4404-20-20 G 1 1/4" 45° ITL 1 1/4"4404-24-24 G 1 1/2" 45° ITL 1 1/2"4404-32-32 G 2" 45° ITL 2"

4413UNIFIED-THREADED STRAIGHT,

THRUST-wIRED NUT

74° cone sealing

4413-17-12 1 1/16" - 12 UN JIC FS ITL 3/4"4413-21-12 1 5/16" - 12 UN JIC FS ITL 3/4"4413-21-16 1 5/16" - 12 UN JIC FS ITL 1"4413-26-20 1 5/8" - 12 UN JIC FS ITL 1 1/4"4413-30-20 1 7/8" - 12 UN JIC FS ITL 1 1/4"4413-30-24 1 7/8" - 12 UN JIC FS ITL 1 1/2"4413-40-32 2 1/2" - 12 UN JIC FS ITL 2"




4404G-THREADED 45° BEND,

THRUST-wIRED NUT

60° cone sealing

4416-17-12 1 1/16" - 12 UN JIC 90° ITL 3/4"4416-21-16 1 5/16" - 12 UN JIC 90° ITL 1"4416-26-20 1 5/8" - 12 UN JIC 90° ITL 1 1/4"4416-30-24 1 7/8" - 12 UN JIC 90° ITL 1 1/2"4416-40-32 2 1/2" - 12 UN JIC 90° ITL 2"



4400-09-12 Deltaflex /4SH/R13/R15/R35/R42 3/4"4400-09-16 Deltaflex /4SH/R13/R15/R35/R42 1"4400-09-20 Deltaflex /4SH/R35 1 1/4"4400-09-24 Deltaflex /4SH 1 1/2"4400-09-32 Deltaflex /4SH 2"4400-13-20 R13/R15 1 1/4"4400-13-24 R13/R35 1 1/2"4400-13-32 R13/R35 2"4400-14-20 R42 1 1/4"4400-14-24 R42/R15 1 1/2"



4440NPTF-THREADED STRAIGHT


4443-12-12 3/4" SAE3 ITL 3/4"4443-16-12 1" SAE3 ITL 3/4"4443-16-16 1" SAE3 ITL 1"4443-16-20 1" SAE3 ITL 1 1/4"4443-20-16 1 1/4" SAE3 ITL 1"4443-20-20 1 1/4" SAE3 ITL 1 1/4"4443-24-20 1 1/2" SAE3 ITL 1 1/4"4443-24-24 1 1/2" SAE3 ITL 1 1/2"4443-32-24 2" SAE3 ITL 1 1/2"4443-32-32 2" SAE3 ITL 2"



4444-12-12 3/4" SAE3 90° ITL 3/4"4444-16-12 1" SAE3 90° ITL 3/4"4444-16-16 1" SAE3 90° ITL 1"4444-20-16 1 1/4" SAE3 90° ITL 1"4444-20-20 1 1/4" SAE3 90° ITL 1 1/4"4444-20-24 1 1/4" SAE3 90° ITL 1 1/2"4444-24-20 1 1/2" SAE3 90° ITL 1 1/4"4444-24-24 1 1/2" SAE3 90° ITL 1 1/2"4444-32-24 2" SAE3 90° ITL 1 1/2"4444-32-32 2" SAE3 90° ITL 2"


4444 SAE FLANGE 90° BEND

Code 61

4417UNIFIED-THREADED 45° BEND,

THRUST-wIRED NUT

74° cone sealing

4417-17-12 1 1/16" - 12 UN JIC 45° ITL 3/4"4417-21-16 1 5/16" - 12 UN JIC 45° ITL 1"4417-26-20 1 5/8" - 12 UN JIC 45° ITL 1 1/4"4417-30-24 1 7/8" - 12 UN JIC 45° ITL 1 1/2"4417-40-32 2 1/2" - 12 UN JIC 45° ITL 2"


4443SAE FLANGE STRAIGHT

Code 61

4423M-THREADED STRAIGHT


4423-36-12 M 36 x 2.0 25 SKS ITL 3/4"4423-42-16 M 42 x 2.0 30 SKS ITL 1"4423-52-20 M 52 x 2.0 38 SKS ITL 1 1/4"


4440-12-12 3/4" - 14 NPT M 3/4"4440-16-16 1" - 11½ NPT M 1"4440-20-20 1 1/4" - 11½ NPT M 1 1/4"4440-24-24 1 1/2" - 11½ NPT M 1 1/2"4440-32-32 2" - 11½ NPT M 2"

4453-12-12 3/4" SAE6 ITL 3/4"4453-12-16 3/4" SAE6 ITL 1"4453-16-12 1" SAE6 ITL 3/4"4453-16-16 1" SAE6 ITL 1"4453-16-20 1" SAE6 ITL 1 1/4"4453-20-16 1 1/4" SAE6 ITL 1"4453-20-20 1 1/4" SAE6 ITL 1 1/4"4453-20-24 1 1/4" SAE6 ITL 1 1/2"4453-24-20 1 1/2" SAE6 ITL 1 1/4"4453-24-24 1 1/2" SAE6 ITL 1 1/2"4453-32-24 2" SAE6 ITL 1 1/2"4453-32-32 2" SAE6 ITL 2"


4448-12-12 3/4" SAE3 45° ITL 3/4"4448-16-12 1" SAE3 45° ITL 3/4"4448-16-16 1" SAE3 45° ITL 1"4448-20-16 1 1/4" SAE3 45° ITL 1"4448-20-20 1 1/4" SAE3 45° ITL 1 1/4"4448-24-20 1 1/2" SAE3 45° ITL 1 1/4"4448-24-24 1 1/2" SAE3 45° ITL 1 1/2"4448-32-24 2" SAE3 45° ITL 1 1/2"4448-32-32 2" SAE3 45° ITL 2"


4448SAE FLANGE 45°BEND

Code 61

4453SAE FLANGE STRAIGHT

Code 62



4:44461-12-12 3/4" SAE6 45° L ITL 3/4"4461-16-16 1" SAE6 45° L ITL 1"4461-20-16 1 1/4" SAE6 45° L ITL 1"4461-20-20 1 1/4" SAE6 45° L ITL 1 1/4"4461-24-24 1 1/2" SAE6 45° L ITL 1 1/2"


Code 62


4454-12-12 3/4" SAE6 90° ITL 3/4"4454-12-16 3/4" SAE6 90° ITL 1"4454-16-12 1" SAE6 90° ITL 3/4"4454-16-16 1" SAE6 90° ITL 1"4454-16-20 1" SAE6 90° ITL 1 1/4"4454-20-16 1 1/4" SAE6 90° ITL 1"4454-20-20 1 1/4" SAE6 90° ITL 1 1/4"4454-20-24 1 1/4" SAE6 90° ITL 1 1/2"4454-24-20 1 1/2" SAE6 90° ITL 1 1/4"4454-24-24 1 1/2" SAE6 90° ITL 1 1/2"4454-32-24 2" SAE6 90° ITL 1 1/2"4454-32-32 2" SAE6 90° ITL 2"

4458-12-12 3/4" SAE6 45° ITL 3/4"4458-16-12 1" SAE6 45° ITL 3/4"4458-16-16 1" SAE6 45° ITL 1"4458-16-20 1" SAE6 45° ITL 1 1/4"4458-20-16 1 1/4" SAE6 45° ITL 1"4458-20-20 1 1/4" SAE6 45° ITL 1 1/4"4458-20-24 1 1/4" SAE6 45° ITL 1 1/2"4458-24-24 1 1/2" SAE6 45° ITL 1 1/2"4458-24-20 1 1/2" SAE6 45° ITL 1 1/4"4458-32-32 2" SAE6 45° ITL 2"



Code 62

4460-12-12 3/4" SAE6 90° L ITL 3/4"4460-16-12 1" SAE6 90° L ITL 3/4"4460-16-16 1" SAE6 90° L ITL 1"4460-20-16 1 1/4" SAE6 90° L ITL 1"4460-20-20 1 1/4" SAE6 90° L ITL 1 1/4"4460-24-24 1 1/2" SAE6 90° L ITL 1 1/2"



4461SAE FLANGE 45°BEND, LONG

Code 62

4460SAE FLANGE 90°BEND, LONG

Code 62

4463-12-12 3/4" SC 3/4"4463-16-12 1" SC 3/4"4463-16-16 1" SC 1"4463-20-16 1 1/4" SC 1"4463-20-20 1 1/4" SC 1 1/4"4463-24-20 1 1/2" SC 1 1/4"4463-24-24 1 1/2" SC 1 1/2"


4464SUPERCAT FLANGE

90°BEND

4464-12-12 3/4" SC 90° 3/4"4464-16-12 1" SC 90° 3/4"4464-16-16 1" SC 90° 1"4464-20-16 1 1/4" SC 90° 1"4464-20-20 1 1/4" SC 90° 1 1/4"4464-24-20 1 1/2" SC 90° 1 1/4"4464-24-24 1 1/2" SC 90° 1 1/2"


4468-12-12 3/4" SC 45° 3/4"4468-16-12 1" SC 45° 3/4"4468-16-16 1" SC 45° 1"4468-20-16 1 1/4" SC 45° 1"4468-20-20 1 1/4" SC 45° 1 1/4"4468-24-20 1 1/2" SC 45° 1 1/4"4468-24-24 1 1/2" SC 45° 1 1/2"


4468SUPERCAT FLANGE

45°BEND

4463SUPERCAT FLANGE

STRAIGHT



4474-25-12 M 36 x 2.0 25 DKSO 90° ITL 3/4"4474-30-16 M 42 x 2.0 30 DKSO 90° ITL 1"4474-38-20 M 52 x 2.0 38 DKSO 90° ITL 1 1/4"

4475-25-12 M 36 x 2.0 25 DKSO 45° ITL 3/4"4475-30-16 M 42 x 2.0 30 DKSO 45° ITL 1"4475-38-20 M 52 x 2.0 38 DKSO 45° ITL 1 1/4"

4473-25-12 M 36 x 2.0 25 DKSO FS ITL 3/4"4473-30-16 M 42 x 2.0 30 DKSO FS ITL 1"4473-38-20 M 52 x 2.0 38 DKSO FS ITL 1 1/4"




4490-12-12 1 3/16" - 12 UN ORFS FS 3/4"4490-16-12 1 7/16" - 12 UN ORFS FS 3/4"4490-16-16 1 7/16" - 12 UN ORFS FS 1"4490-20-16 1 11/16" - 12 UN ORFS FS 1"4490-20-20 1 11/16" - 12 UN ORFS FS 1 1/4"4490-24-24 2" - 12 UN ORFS FS 1 1/2"

4491-12-12 1 3/16" - 12 UN ORFS 90° 3/4"4491-16-16 1 7/16" - 12 UN ORFS 90° 1"4491-20-20 1 11/16" - 12 UN ORFS 90° 1 1/4"4491-24-24 2" - 12 UN ORFS 90° 1 1/2"

4492-12-12 1 3/16" - 12 UN ORFS 45° 3/4"4492-16-16 1 7/16" - 12 UN ORFS 45° 1"4492-20-20 1 11/16" - 12 UN ORFS 45° 1 1/4"4492-24-24 2" - 12 UN ORFS 45° 1 1/2"




4474M-THREADED 90° BEND,

SLIP-ON NUT


4473M-THREADED STRAIGHT,

SLIP-ON NUT



STRAIGHT, SLIP-ON NUT

ORFS sealing


45° BEND, SLIP-ON NUT

ORFS sealing


90° BEND, SLIP-ON NUT

ORFS sealing

4475M-THREADED 45° BEND,

SLIP-ON NUT




4:4

4573 M-THREADED STRAIGHT,

SLIP-ON NUT

24° cone sealing with O-ring, for Blastopak

4573-10-04 M 18 x 1.5 10 DKSO FS ITL 1/4"4573-14-06 M 22 x 1.5 14 DKSO FS ITL 3/8"4573-16-08 M 24 x 1.5 16 DKSO FS ITL 1/2"4573-25-12 M 36 x 2.0 25 DKSO FS ITL 3/4"4573-30-16 M 42 x 2.0 30 DKSO FS ITL 1"

4500-11FERRULE

Deltaflex/R13, for hydraulic hammers


4500-11-16 Deltaflex/R13/4SH 1"4500-11-20 Deltaflex 1 1/4"


THRUST-wIRED NUT

60° cone sealing, for hydraulic hammers

4507-16-16 BSP 1" FS ITL Ham. 1"4507-20-20 BSP 1 1/4" FS ITL Ham. 1 1/4"


4576M-THREADED STRAIGHT,

SLIP-ON NUT

24° cone sealing with O-ring, for hydraulic hammers

4576-30-16 M 42 x 2.0 30 DKSO FS ITL Ham. 1"

4508G-THREADED STRAIGHT

60° cone sealing, for hydraulic hammers

4508-16-16 BSP 1" M ITL Ham. 1"

Part number Thread Type Hose ID Part number Thread Pipe Type Hose ID



4500-10-04 Blastopak 1/4"4500-10-06 Blastopak 3/8"4500-10-08 Blastopak 1/2"4500-10-12 Blastopak 3/4"4500-10-16 Blastopak 1"

4501-04-04 BSP 1/4" FS ITL 1/4"4501-06-06 BSP 3/8" FS ITL 3/8"4501-08-08 BSP 1/2" FS ITL 1/2"4501-12-12 BSP 3/4" FS ITL 3/4"4501-16-16 BSP 1" FS ITL 1"


4500-10FERRULE

Blastopak


THRUST-wIRED NUT

60° cone sealing, for Blastopak


5

HYDROSCAND HOSE COUPLiNGS

HOSE COUPLiNGS – iNDUSTRY/FUEL/AC

PRODUCT GROUP 500 & 510

Beside our wide range of high quality hoses, we can also offer couplings for all kinds of applications. Low pressure couplings for applications with low pressure can be swaged with ferrules or assembled with hose clamps. As a further customer service, we can also offer pre-assembled hoses with couplings.The couplings are available in materials such as brass, stainless steel, bronze, aluminium and polypropene.


5009-035023

TAbLE OF CONTENTS

5001-01 Claw coupling 1435001-02 Claw coupling, male thread 1435001-03 Claw coupling, female thread 1435001-04 Seal 1435001-11 Claw coupling 1435001-12 Claw coupling, M 1435001-13 Claw coupling, F 1435001-17 Three-way Claw coupling 1435009-01 Seal 1445009-01 Adjustable claw coupling 1445009-02 Adjustable claw coupling, M 1445009-03 Adjustable claw coupling, F 1445001-51 GEKA 1445001-52 GEKA, male thread 1445001-53 GEKA, female thread 1445001-54 GEKA, cover 1445001-55 GEKA, seal 145

5001-09 Connector pipe 1455056-30 Fire coupling 63, hose con. 1455056-31 Fire coupling 63, female 1455056-32 Fire coupling 63, male 1455056-33 Fire coupling 63 cover 1455056-34 Fire coupling 63, transition 1455056-35 Fire coupling 63 seal 1455491-00-03 Fire coupling 63, nozzle 1455004-00 Combination nipple, weldable 1465004 Combination nipple G male 1465004 Combination nipple G male 1465010 Cardan MOD 42 KMS, F 1475011 Cardan MOD 42 KVS, M 147

CLAw COUPLiNGS (501) PAGE

CONNECTOR PiPES, COmbiNATiON NiPPLES, FiRE COUPLiNGS (502) PAGE

CARDAN COUPLiNGS (503) PAGE

5012 Cardan MOD 42 KMG, F 1475013 Cardan MOD 42 KVG, M 1475014 Cardan MOD 42 KXM, F 1475015 Cardan MOD 42 KXV, M 1475016 Cardan MOD 42 KKM, F 1485017 Cardan MOD 42 KKV, M 1485018 Cardan coupling EPDM seal 1485018-10 Cardan coupling Nitrile seal 1485018-20 Cardan coupling Viton seal 1485110-11 Bauer coupling, M 1495110-12 Locking clamp for Bauer 1495110-13 Bauer coupling, F 1495110-14 Seal for Bauer coupling 149

5020 CAM-LOCK coupling A 1505021 CAM-LOCK coupling B 1505022 CAM-LOCK coupling C 1505023 CAM-LOCK coupling D 1515024 CAM-LOCK coupling E 1515025 CAM-LOCK coupling F 1515026 CAM-LOCK coupling DC 1525028 Seal CAM-LOCK, Nitrile 1525027 CAM-LOCK coupling DP 1525029 Seal CAM-LOCK, EPDM 1525050 Safety clamps 1535022-50 CAM-LOCK Coupling C 1535024-50 CAM-LOCK Coupling E 153

5051-20 Creamery Coupling, M 1535052-20 Creamery Coupling, FS 1535053 Hose tail, M 1535054 Hose tail, FS 1535055 Petrol truck fitting, M 1555056 Petrol truck fitting, F 1555057 Cover for petrol truck fitting 1555058 Cover for petrol truck fitting 1555056-25 Lock ring for petrol truck 1555056-26 Seal ring forpetrol truck 1555056-27/28 Seal rings HAPALON/P.T.F.E. 1555059-00 Flange PN16 – solid 156 5059-20 Flange PN16 – solid, stainless 1565059-50 Flange PN16 – swivel 1565059-70 Flange PN16 – swivel 156

5079-00-01 Crimp ring 1545079-00-02 Crimp pipe 1545079-00-03 Finger nut 1545079-00-04 Connector pipe 1545079-00-05 Seal 1545079-00-06 Compressor elbow 90° 1545079-00-07 Compressor coupling 1545079-00-08 Compressor coupling 154

CAm-LOCK COUPLiNGS (504) PAGE

DAiRY AND PETROL TRUCK COUPLiNGS, FLANGES (513) PAGE

COmPRESSOR COUPLiNGS (501) PAGE

HOSE COUPLiNGS – iNDUSTRY/FUEL/AC PRODUCT GROUP 500 & 510


5061-10 Steam coupling, M 1565062-10 Steam coupling, F 1565062-90 Steam seal 1565200 Swage ferrule 158

5201 Concrete coupling system 22 1575202 Concrete coupling system 22 1575203 Concrete coupling system 22 1575205 Concrete coupling system 22, 1575206 Concrete coupling system 22 1575207 Concrete coupling system 22 1575208 Concrete coupling system 22 1575209 Concrete coupling system 22 1575210 Concrete coupling system 22 1585290 Concrete coupling Seal 158

5070 Double nipple, G M x G M 1585071 Bushing, G M x G F 1595073 T-pipe, G F x G F x G F T 1595074 Hose Coupling, G M 1595076 Sleeve, G F x G F 1595077 Plug, G M 1605078 Connector pipe 1605079 Hose Coupling, G FS 1605080 Hose Coupling, G FS 90° 1605081 90° Elbow F – M 1605082 G F x G FS 1605083 Bushing, G M x G F 1615084 90° Elbow F – F 1615095 Petrol pump Coupling, male 1655096 Petrol pump Coupling, female 1655096-16-99 Tool for Petrol pump Couplings 1655555 Casing for hose 1665555 Casing G-thread, Male 1665555 Casing G-thread, female 1665555 Transition nipple 1665555 Hose nipple 1665555 Coupling nipple, G-thread 1665555 Coupling nipple, G-thread 1665555-63 Nozzle pipe Adjustable 1675555-32 Nozzle pipe Adjustable 1675555-33 Water gun, ergo-dynamic 1675555-50 Water gun Adjustable 1675491-00 Water gun, rubber cover 1675490-05 Hose holder Zinc 1675491 Flush nozzle 167

5070~S Double nipple, G M x G M 1615071~S Bushing, G M x G F 1625073~S T-pipe, G F x G F x G F 1625074~S Hose nipple, G M 1625076~S Bushing, G F 1625077~S Plug Male, G M 1635081~S 90° Elbow F – M 1635084~S 90° Elbow F – F 1635085~S 45° Elbow F – F 1635086~S 90° Pipe bend, G M – G M 1635087~S Straight bushing F, G F 1635088~S Bushing F – F 1645089~S Cross tube F, G F 1645089-95~S Plug Female, G F 1645089-96~S Nut, G F 1645090-10~S Threaded welding nipple, G M 1645090-20~S Nipple pipe M, G M 1655090-30~S Screw bushing M 165

5800 LP hose Ferrule 1685801 G-threaded Nut 1685803 LP hose fitting, G-threaded 1685810 LP hose fitting, G-threaded 1685820 LP hose fitting, M-threaded 1685826 LP hose fitting, stand pipe 1695827 LP hose fitting, stand pipe 90° 1695828 LP hose fitting, stand pipe 45° 1695829 M-threaded Nut 1695830 LP hose fitting, M-threaded 1695831 LP hose fitting, M-threaded 1695839 LP hose fitting, R-threaded 1705840 LP hose fitting, NPT-threaded 1705882 Banjo, Metric 90° 1705883 Banjo, welding 1705884 Banjo, Metric 1705885 Banjo bolt, M-threaded 1705886 Banjo bolt, G-threaded 1705888 Double banjo bolt 1715889 Banjo, DIN 7641 60° female 1715890 Nipple 1715891 T Nipple 1715898 Double Banjo 1715860 LP hose fitting, G-threaded, F 172

5865 LP hose fitting, G-threaded, M 1725704 UN 90° FS with O-ring/valve 1735702 UN FS with O-ring/Valve 1735703 UN 90° FS with O-ring 1735701 UN FS with O-ring 1735706 UN 45° FS with O-ring/Valve 1735708 UN 90°T FS with O-ring/valve 1735705 UN 45° FS with O-ring 1735707 UN 90°T FS with O-ring 1735744 UN 90° MS with O-ring/valve 1745745 UN 45° MS with O-ring 1745743 UN 90° MS with O-ring 1745741 UN MS with O-ring 1745746 UN 45° MS with O-ring/valve 1745760 Hose connector 1745761 Hose connector with valve 1745764 AC O-ring 174

LOw PRESSURE COUPLiNGS (512) PAGE

AC-COUPLiNGS (512) PAGE

CONCRETE COUPLiNGS (501) PAGE

bRASS PiPE PARTS, iNCLUDiNG PETROL PUmP AND wATER COUPLiNGS (506) PAGE

STAiNLESS STEEL PARTS (511) PAGE

5555

5708

5820

STEAm COUPLiNGS (501) PAGE

PRODUCT GROUP 500 & 510 HOSE COUPLiNGS – iNDUSTRY/FUEL/AC


5

5001-01CLAw COUPLiNG

For hose


5001-01-06 Claw coupling 3/8"5001-01-08 Claw coupling 1/2"5001-01-12 Claw coupling 3/4"5001-01-16 Claw coupling 1"

PRODUCT GROUP 501

5001-11CLAw COUPLiNG

For hose PN 10Bar, DIN 3483


5001-11-04 Claw coupling 1/4"5001-11-06 Claw coupling 3/8"5001-11-08 Claw coupling 1/2"5001-11-10 Claw coupling 5/8"5001-11-12 Claw coupling 3/4"5001-11-16 Claw coupling 1"5001-11-20 Claw coupling 1 1/4"

PRODUCT GROUP 501

5001-02CLAw COUPLiNG,

mALE THREAD

Part number Type Thread

5001-02-06 Claw coupling 3/8" M5001-02-08 Claw coupling 1/2" M5001-02-12 Claw coupling 3/4" M5001-02-16 Claw coupling 1" M

PRODUCT GROUP 501

5001-12CLAw COUPLiNG, m

PN 10Bar, DIN 3482


5001-12-04 Claw coupling 1/4" M5001-12-06 Claw coupling 3/8" M5001-12-08 Claw coupling 1/2" M5001-12-12 Claw coupling 3/4" M5001-12-16 Claw coupling 1" M5001-12-20 Claw coupling 1 1/4" M

PRODUCT GROUP 501

5001-03CLAw COUPLiNG, FEmALE THREAD


5001-03-06 Claw coupling 3/8" F5001-03-08 Claw coupling 1/2" F5001-03-12 Claw coupling 3/4" F5001-03-16 Claw coupling 1" F

PRODUCT GROUP 501

5001-13CLAw COUPLiNG, F

PN 10Bar, DIN 3483


5001-13-04 Claw coupling 1/4" F5001-13-06 Claw coupling 3/8" F5001-13-08 Claw coupling 1/2" F5001-13-12 Claw coupling 3/4" F5001-13-16 Claw coupling 1" F5001-13-20 Claw coupling 1 1/4" F

Part number Type Size

5001-17-12 Claw coupling, three-way 3/4"5001-17-16 Claw coupling, three-way 1"

PRODUCT GROUP 501

5001-04SEAL

For standard claw couplings

Part number Description

5001-04-00 Seal for air, black

PRODUCT GROUP 501

5001-17THREE-wAY CLAw COUPLiNG

PN 10Bar, DIN 3489

PRODUCT GROUP 501

For stainless steel claw couplings, see chapter 10.



5009-01ADjUSTAbLE

CLAw COUPLiNGDIN 3238


5009-01-06 Adjustable claw coupling 3/8"5009-01-08 Adjustable claw coupling 1/2"5009-01-10 Adjustable claw coupling 5/8"5009-01-12 Adjustable claw coupling 3/4"5009-01-16 Adjustable claw coupling 1"

PRODUCT GROUP 501

5009-02ADjUSTAbLE

CLAw COUPLiNG, mDIN 3238


5009-02-06 Adjustable claw coupling G 3/8" M 5009-02-08 Adjustable claw coupling G 1/2" M 5009-02-12 Adjustable claw coupling G 3/4" M 5009-02-16 Adjustable claw coupling G 1" M

PRODUCT GROUP 501

5009-03ADjUSTAbLE

CLAw COUPLiNG, FDIN 3238


5009-03-06 Adjustable claw coupling G 3/8" F5009-03-08 Adjustable claw coupling G 1/2" F5009-03-12 Adjustable claw coupling G 3/4" F5009-03-16 Adjustable claw coupling G 1" F

PRODUCT GROUP 501

5001-51GEKA

Hose claw coupling

Part number Type/Material Hose ID

5001-51-06 Claw coupling/Brass 3/8"5001-51-08 Claw coupling/Brass 1/2"5001-51-10 Claw coupling/Brass 5/8"5001-51-12 Claw coupling/Brass 3/4"5001-51-16 Claw coupling/Brass 1"5001-51-20 Claw coupling/Brass 1 1/4"5001-51-24 Claw coupling/Brass 1 1/2"

PRODUCT GROUP 501

5001-52GEKA, mALE THREAD

Hose claw coupling, male thread

Part number Type/Material Thread

5001-52-04 Claw coupling/Brass 1/4"5001-52-06 Claw coupling/Brass 3/8"5001-52-08 Claw coupling/Brass 1/2" 5001-52-12 Claw coupling/Brass 3/4" 5001-52-16 Claw coupling/Brass 1" 5001-52-20 Claw coupling/Brass 1 1/4" 5001-52-24 Claw coupling/Brass 1 1/2"

PRODUCT GROUP 501

5001-53GEKA, FEmALE THREAD

Hose claw coupling, female thread

Part number Type/Material Thread

5001-53-04 Claw coupling/Brass 1/4" F5001-53-06 Claw coupling/Brass 3/8" F5001-53-08 Claw coupling/Brass 1/2" F5001-53-12 Claw coupling/Brass 3/4" F5001-53-16 Claw coupling/Brass 1" 5001-53-20 Claw coupling/Brass 1 1/4" 5001-53-24 Claw coupling/Brass 1 1/2"

PRODUCT GROUP 501

Part number Type/Material

5001-54-01 Cover claw coupling / Brass

5009-01SEAL

For adjustable claw couplings

Part number Fluid Measure/mm

5009-01-01 Water, oil, air 21x33x75009-01-02 Steam 21x33x75009-01-03 Water, oil, air 21x30x45009-01-04 Steam 21x30x4

PRODUCT GROUP 501

5001-54GEKA, COvER

PRODUCT GROUP 501



5

Part number Material Shore

Part number Material Hose ID

Part number Material Thread

Part number Material Thread

Part number Type Material Hose ID

5001-55-01 NBR 65°5001-55-02 NBR 50°

The GEKA seals are alos available in Viton.

5056-30-32 PRESSAL 2"5056-30-40 PRESSAL 2 1/2"5056-30-48 PRESSAL 3"

5056-31-32 PRESSAL 2" FS5056-31-40 PRESSAL 2 1/2" FS

5056-32-32 PRESSAL 2"5056-32-40 PRESSAL 2 1/2"

5001-09-06 Connector pipe Steel 3/8"5001-09-08 Connector pipe Steel 1/2"5001-09-10 Connector pipe Steel 5/8"5001-09-12 Connector pipe Steel 3/4"5001-09-16 Connector pipe Steel 1"5001-09-20 Connector pipe Steel 1 1/4"5001-09-24 Connector pipe Aluminium 1 1/2"5001-09-32 Connector pipe Aluminium 2"5001-09-40 Connector pipe Aluminium 2 1/2"5001-09-48 Connector pipe Aluminium 3"5001-09-64 Connector pipe Aluminium 4"5001-09-80 Connector pipe Aluminium 5"5001-09-96 Connector pipe Aluminium 6"

5001-55GEKA, SEAL

5056-30FiRE COUPLiNG 63, HOSE CONNECTiON

Delivered in pairs.

5056-31FiRE COUPLiNG 63,

FEmALE THREAD


mALE THREAD

5001-09CONNECTOR PiPE

Steel / aluminium

PRODUCT GROUP 501

PRODUCT GROUP 502

PRODUCT GROUP 502

PRODUCT GROUP 502

Part number Material


5056-33-40 PRESSAL

5056-34-40 PRESSAL/Brass

5056-33FiRE COUPLiNG 63

COvER wiTH CHAiN


TRANSiTiONTransition to GEKA coupling

PRODUCT GROUP 502

PRODUCT GROUP 502


5056-35-40 Chloroprene

5056-35FiRE COUPLiNG 63

SEAL

PRODUCT GROUP 502


5491-00-03 PRESSAL

5491-00-03FiRE COUPLiNG 63, NOzzLE

Flush nozzle, claw coupling connection

PRODUCT GROUP 502

PRODUCT GROUP 502

For more nozzles, see chapter 5:05.



5004-00COmbiNATiON NiPPLE,

wELDAbLENo surface treatment

5004COmbiNATiON NiPPLE

G mALE THREAD

5004COmbiNATiON NiPPLE

G mALE THREADAISI 316 stainless steel

Part number Pin Type Hose ID Part number Thread Type Hose ID


5004-00-08 1/2" Weldable nipple 1/2"5004-00-12 3/4" Weldable nipple 3/4"5004-00-16 1" Weldable nipple 1"5004-00-20 1 1/4" Weldable nipple 1 1/4"5004-00-24 1 1/2" Weldable nipple 1 1/2"5004-00-32 2" Weldable nipple 2"5004-00-40 2 1/2" Weldable nipple 2 1/2"5004-00-48 3" Weldable nipple 3"5004-00-64 4" Weldable nipple 4"5004-00-80 5" Weldable nipple 5"5004-00-96 6" Weldable nipple 6"

Other dimensions available upon request.

5004-08-08 G 1/2" M Combination nipple 1/2"5004-12-12 G 3/4" M Combination nipple 3/4"5004-16-16 G 1" M Combination nipple 1"5004-20-20 G 1 1/4" M Combination nipple 1 1/4"5004-24-24 G 1 1/2" M Combination nipple 1 1/2"5004-32-32 G 2" M Combination nipple 2"5004-40-40 G 2 1/2" M Combination nipple 2 1/2"5004-48-48 G 3" M Combination nipple 3"5004-64-64 G 4" M Combination nipple 4"5004-80-80 G 5" M Combination nipple 5"5004-96-96 G 6" M Combination nipple 6"

Other dimensions available upon request.Also available with NTP connection

5004-08-09 G 1/2" M Combination nipple/SS 1/2"5004-12-13 G3/4" M Combination nipple/SS 3/4"5004-16-17 G1" M Combination nipple/SS 1"5004-20-21 G1 1/4" M Combination nipple/SS 1 1/4"5004-24-25 G1 1/2" M Combination nipple/SS 1 1/2"5004-32-33 G2" M Combination nipple/SS 2"5004-40-41 G2 1/2" M Combination nipple/SS 2 1/2"5004-48-49 G3" M Combination nipple/SS 3"5004-64-65 G4" M Combination nipple/SS 4"5004-80-81 G5" M Combination nipple/SS 5"5004-96-97 G6" M Combination nipple/SS 6"

Other dimensions available upon request.Also available with NTP connection

PRODUCT GROUP 502 PRODUCT GROUP 502

PRODUCT GROUP 502

Low pressure ball valves can be found in chapter 8:0



5

5010CARDAN mOD 42 KmS, FFemale coupling with hose

connectiton. Galvanised steel.

5012CARDAN mOD 42 KmG, F

Female coupling with male thread. Galvanised steel.

5013CARDAN mOD 42 KvG, m

Male coupling with male thread. Galvanised steel.

5014CARDAN mOD 42 KXm, F

Blind female coupling. Galvanised steel.

5015CARDAN mOD 42 KXv, m

Blind male coupling. Galvanised steel.

5011CARDAN mOD 42 KvS, m

Male coupling with hose connectiton. Galvanised steel.

Part number Coupling size Type Hose ID Part number Coupling size Type Thread

Part number Coupling size Type Thread

Part number Coupling size Type

Part number Coupling size Type

Part number Coupling size Type Hose ID

5010-24-24 38 KMS 1 1/2"5010-32-24 48 KMS 1 1/2"5010-32-32 48 KMS 2"5010-40-40 60 KMS 2 1/2"5010-48-32 76 KMS 2"5010-48-40 76 KMS 2 1/2"5010-48-47 76 KMS 73.6 mm¤5010-48-48 76 KMS 73.6 mm5010-48-49 76 KMS 3"5010-64-64 102 KMS 4"5010-80-80 133 KMS 5"5010-96-96 152 KMS 6"

¤ Short version L=170 mm (std. 240 mm)

5012-32-32 48 KMG G 2"5012-48-32 76 KMG G 2"5012-48-48 76 KMG G 3"5012-64-64 102 KMG G 4"5012-80-80 133 KMG G 5"5012-96-96 152 KMG G 6"

5013-32-24 48 KVG G 1 1/2"5013-32-32 48 KVG G 2"5013-48-32 76 KVG G 2"5013-48-48 76 KVG G 3"5013-64-64 102 KVG G 4"5013-80-80 133 KVG G 5"5013-96-96 152 KVG G 6"

5014-00-24 38 KXM5014-00-32 48 KXM5014-00-40 60 KXM5014-00-48 76 KXM5014-00-64 102 KXM5014-00-80 133 KXM5014-00-96 152 KXM

5015-00-24 38 KXV5015-00-32 48 KXV5015-00-40 60 KXV5015-00-48 76 KXV5015-00-64 102 KXV5015-00-80 133 KXV5015-00-96 152 KXV

5011-24-24 38 KVS 1 1/2"5011-32-24 48 KVS 1 1/2"5011-32-32 48 KVS 2"5011-40-40 60 KVS 2 1/2"5011-48-32 76 KVS 2"5011-48-40 76 KVS 2 1/2"5011-48-47 76 KVS 73.6 mm¤5011-48-48 76 KVS 73.6 mm5011-48-49 76 KVS 3"5011-64-48 102 KVS 73.6 mm5011-64-64 102 KVS 4"5011-80-80 133 KVS 5"5011-96-96 152 KVS 6"

¤ Kortversion L=125 mm (std. 170 mm)


PRODUCT GROUP 503

PRODUCT GROUP 503

PRODUCT GROUP 503

PRODUCT GROUP 503

These couplings are also available in stainless steel.



5016CARDAN mOD 42 KKm, F

Female coupling for welding. Galvanised steel.

Part number Coupling size Type Pipe dim.

5016-00-32 48 KKM 50.85016-00-48 76 KKM 76.05016-00-64 102 KKM 102.05016-00-80 133 KKM 133.05016-00-96 152 KKM 152.4

PRODUCT GROUP 503

5017CARDAN mOD 42 KKv, m

Male coupling for welding. Galvanised steel.

Part number Coupling size Type Pipe dim.

5017-00-32 48 KKV 50.85017-00-48 76 KKV 76.05017-00-64 102 KKV 102.05017-00-80 133 KKV 133.05017-00-96 152 KKV 152.4

PRODUCT GROUP 503

Don’t hesitate to ask for more designs and materials

Part number Type Coupling size

5018-00-32 Seal EPDM 485018-00-40 Seal EPDM 605018-00-48 Seal EPDM 765018-00-64 Seal EPDM 1025018-00-80 Seal EPDM 1335018-00-96 Seal EPDM 152

5018CARDAN COUPLiNG EPDm SEAL

EPDM (Standard) -50°C – +120°C

PRODUCT GROUP 503


5018-10-32 Seal NITRILE 485018-10-48 Seal NITRILE 765018-10-64 Seal NITRILE 1025018-10-80 Seal NITRILE 1335018-10-96 Seal NITRILE 152

5018-10CARDAN COUPLiNG NiTRiLE SEAL

NITRILE -40°C – +100°C

PRODUCT GROUP 503


5018-20-24 Seal VITON 385018-20-32 Seal VITON 485018-20-48 Seal VITON 765018-20-64 Seal VITON 1025018-20-80 Seal VITON 1335018-20-96 Seal VITON 152

5018-20CARDAN COUPLiNG viTON SEAL

VITON -40°C – +100°C

PRODUCT GROUP 503



5

5110-13bAUER COUPLiNG, F

Seal included.

5110-11bAUER COUPLiNG, m

Locking clamp not included.

5110-12LOCKiNG CLAmP

FOR bAUER COUPLiNG

Part number Coupling size Connection Part number Coupling size Connection

Part number Decription For connection

5110-13-64 108 x 100 mm 4"5110-13-80 133 x 125 mm 5"5110-13-96 159 x 150 mm 6"

5110-11-64 108 x 100 mm 4"5110-11-80 133 x 125 mm 5"5110-11-96 159 x 150 mm 6"

5110-12-64 Locking clamp 4"5110-12-80 Locking clamp 5"5110-12-96 Locking clamp 6"


PRODUCT GROUP 503

5110-14SEAL

FOR bAUER COUPLiNG

Part number Decription/material For connection

5110-14-64 Seal/EPDM 4"5110-14-80 Seal/EPDM 5"5110-14-96 Seal/EPDM 6"

PRODUCT GROUP 503

iNDUSTRiAL HOSESSEE CHAPTER 1:4



5020CAm-LOCK COUPLiNG A

5022CAm-LOCK COUPLiNG C

5021CAm-LOCK COUPLiNG b

Part number Description Material Thread

Part number Description Material Hose ID


5020-00-16 CAM-AL-A Aluminium G 1" F5020-00-20 CAM-AL-A Aluminium G 1 1/4" F5020-00-24 CAM-AL-A Aluminium G 1 1/2" F5020-00-32 CAM-AL-A Aluminium G 2" F5020-00-40 CAM-AL-A Aluminium G 2 1/2" F5020-00-48 CAM-AL-A Aluminium G 3" F5020-00-64 CAM-AL-A Aluminium G 4" F

5020-10-16 CAM-BR-A Bronze G 1" F5020-10-20 CAM-BR-A Bronze G 1 1/4" F5020-10-24 CAM-BR-A Bronze G 1 1/2" F5020-10-32 CAM-BR-A Bronze G 2" F5020-10-40 CAM-BR-A Bronze G 2 1/2" F5020-10-48 CAM-BR-A Bronze G 3" F5020-10-64 CAM-BR-A Bronze G 4" F

5020-20-16 CAM-SS-A Stainless steel G 1" F5020-20-20 CAM-SS-A Stainless steel G 1 1/4" F5020-20-24 CAM-SS-A Stainless steel G 1 1/2" F5020-20-32 CAM-SS-A Stainless steel G 2" F5020-20-40 CAM-SS-A Stainless steel G 2 1/2" F5020-20-48 CAM-SS-A Stainless steel G 3" F5020-20-64 CAM-SS-A Stainless steel G 4" F

5020-30-16 CAM-PP-A Polyprophylene G 1" F5020-30-20 CAM-PP-A Polyprophylene G 1 1/4" F5020-30-24 CAM-PP-A Polyprophylene G 1 1/2" F5020-30-32 CAM-PP-A Polyprophylene G 2" F5020-30-48 CAM-PP-A Polyprophylene G 3" F

5022-00-16 CAM-AL-C Aluminium 1"5022-00-20 CAM-AL-C Aluminium 1 1/4"5022-00-24 CAM-AL-C Aluminium 1 1/2"5022-00-32 CAM-AL-C Aluminium 2"5022-00-40 CAM-AL-C Aluminium 2 1/2"5022-00-48 CAM-AL-C Aluminium 3"5022-00-64 CAM-AL-C Aluminium 4"

5022-10-16 CAM-BR-C Bronze 1"5022-10-20 CAM-BR-C Brons 1 1/4"5022-10-24 CAM-BR-C Brons 1 1/2"5022-10-32 CAM-BR-C Brons 2"5022-10-40 CAM-BR-C Brons 2 1/2"5022-10-48 CAM-BR-C Brons 3"5022-10-64 CAM-BR-C Brons 4"

5021-00-16 CAM-AL-B Aluminium G 1" M5021-00-20 CAM-AL-B Aluminium G 1 1/4" M5021-00-24 CAM-AL-B Aluminium G 1 1/2" M5021-00-32 CAM-AL-B Aluminium G 2" M5021-00-40 CAM-AL-B Aluminium G 2 1/2" M5021-00-48 CAM-AL-B Aluminium G 3" M5021-00-64 CAM-AL-B Aluminium G 4" M

5021-10-16 CAM-BR-B Bronze G 1" M5021-10-20 CAM-BR-B Bronze G 1 1/4" M5021-10-24 CAM-BR-B Bronze G 1 1/2" M5021-10-32 CAM-BR-B Bronze G 2" M5021-10-40 CAM-BR-B Bronze G 2 1/2" M5021-10-48 CAM-BR-B Bronze G 3" M5021-10-64 CAM-BR-B Bronze G 4" M

5021-20-16 CAM-SS-B Stainless steel G 1" M5021-20-20 CAM-SS-B Stainless steel G 1 1/4" M5021-20-24 CAM-SS-B Stainless steel G 1 1/2" M5021-20-32 CAM-SS-B Stainless steel G 2" M5021-20-40 CAM-SS-B Stainless steel G 2 1/2" M5021-20-48 CAM-SS-B Stainless steel G 3" M5021-20-64 CAM-SS-B Stainless steel G 4" M

5021-30-16 CAM-PP-B Polyprophylene G 1" M5021-30-20 CAM-PP-B Polyprophylene G 1 1/4" M5021-30-24 CAM-PP-B Polyprophylene G 1 1/2" M5021-30-32 CAM-PP-B Polyprophylene G 2" M5021-30-48 CAM-PP-B Polyprophylene G 3" M

PRODUCT GROUP 504

PRODUCT GROUP 504

5022CAm-LOCK COUPLiNG C


5022-20-16 CAM-SS-C Stainless steel 1"5022-20-20 CAM-SS-C Stainless steel 1 1/4"5022-20-24 CAM-SS-C Stainless steel 1 1/2"5022-20-32 CAM-SS-C Stainless steel 2"5022-20-40 CAM-SS-C Stainless steel 2 1/2"5022-20-48 CAM-SS-C Stainless steel 3"5022-20-64 CAM-SS-C Stainless steel 4"

5022-30-16 CAM-PP-C Polyprophylene 1"5022-30-20 CAM-PP-C Polyprophylene 1 1/4"5022-30-24 CAM-PP-C Polyprophylene 1 1/2"5022-30-32 CAM-PP-C Polyprophylene 2"5022-30-48 CAM-PP-C Polyprophylene 3"

PRODUCT GROUP 504

PRODUCT GROUP 504



5

5023CAm-LOCK COUPLiNG D

5025CAm-LOCK COUPLiNG F

5024CAm-LOCK COUPLiNG E




5023-00-16 CAM-AL-D Aluminium G 1" F5023-00-20 CAM-AL-D Aluminium G 1 1/4" F5023-00-24 CAM-AL-D Aluminium G 1 1/2" F5023-00-32 CAM-AL-D Aluminium G 2" F5023-00-40 CAM-AL-D Aluminium G 2 1/2" F5023-00-48 CAM-AL-D Aluminium G 3" F5023-00-64 CAM-AL-D Aluminium G 4" F

5023-10-16 CAM-BR-D Bronze G 1" F5023-10-20 CAM-BR-D Bronze G 1 1/4" F5023-10-24 CAM-BR-D Bronze G 1 1/2" F5023-10-32 CAM-BR-D Bronze G 2" F5023-10-40 CAM-BR-D Bronze G 2 1/2" F5023-10-48 CAM-BR-D Bronze G 3" F5023-10-64 CAM-BR-D Bronze G 4" F

5023-20-16 CAM-SS-D Stainless steel G 1" F5023-20-20 CAM-SS-D Stainless steel G 1 1/4" F5023-20-24 CAM-SS-D Stainless steel G 1 1/2" F5023-20-32 CAM-SS-D Stainless steel G 2" F5023-20-40 CAM-SS-D Stainless steel G 2 1/2" F5023-20-48 CAM-SS-D Stainless steel G 3" F5023-20-64 CAM-SS-D Stainless steel G 4" F

5023-30-16 CAM-PP-D Polyprophylene G 1" F5023-30-20 CAM-PP-D Polyprophylene G 1 1/4" F5023-30-24 CAM-PP-D Polyprophylene G 1 1/2" F5023-30-32 CAM-PP-D Polyprophylene G 2" F5023-30-48 CAM-PP-D Polyprophylene G 3" F

5025-00-16 CAM-AL-F Aluminium G 1" M5025-00-20 CAM-AL-F Aluminium G 1 1/4" M5025-00-24 CAM-AL-F Aluminium G 1 1/2" M5025-00-32 CAM-AL-F Aluminium G 2" M5025-00-40 CAM-AL-F Aluminium G 2 1/2" M5025-00-48 CAM-AL-F Aluminium G 3" M5025-00-64 CAM-AL-F Aluminium G 4" M

5025-10-16 CAM-BR-F Bronze G 1" M5025-10-20 CAM-BR-F Bronze G 1 1/4" M5025-10-24 CAM-BR-F Bronze G 1 1/2" M5025-10-32 CAM-BR-F Bronze G 2" M5025-10-40 CAM-BR-F Bronze G 2 1/2" M5025-10-48 CAM-BR-F Bronze G 3" M5025-10-64 CAM-BR-F Bronze G 4" M

5024-00-16 CAM-AL-E Aluminium 25 mm 1"5024-00-20 CAM-AL-E Aluminium 32 mm 1 1/4"5024-00-24 CAM-AL-E Aluminium 38 mm 1 1/2"5024-00-32 CAM-AL-E Aluminium 51 mm 2"5024-00-40 CAM-AL-E Aluminium 64 mm 2 1/2"5024-00-48 CAM-AL-E Aluminium 76 mm 3"5024-00-64 CAM-AL-E Aluminium 102 mm 4"

5024-10-16 CAM-BR-E Bronze 25 mm 1"5024-10-20 CAM-BR-E Bronze 32 mm 1 1/4"5024-10-24 CAM-BR-E Bronze 38 mm 1 1/2"5024-10-32 CAM-BR-E Bronze 51 mm 2"5024-10-40 CAM-BR-E Bronze 64 mm 2 1/2"5024-10-48 CAM-BR-E Bronze 76 mm 3"5024-10-64 CAM-BR-E Bronze 102 mm 4"

5024-20-16 CAM-SS-E Stainless steel 25 mm 1"5024-20-20 CAM-SS-E Stainless steel 32 mm 1 1/4"5024-20-24 CAM-SS-E Stainless steel 38 mm 1 1/2"5024-20-32 CAM-SS-E Stainless steel 51 mm 2"5024-20-40 CAM-SS-E Stainless steel 64 mm 2 1/2"5024-20-48 CAM-SS-E Stainless steel 76 mm 3"5024-20-64 CAM-SS-E Stainless steel 102 mm 4"

5024-30-16 CAM-PP-E Polyprophylene 25 mm 1"5024-30-20 CAM-PP-E Polyprophylene 32 mm 1 1/4"5024-30-24 CAM-PP-E Polyprophylene 38 mm 1 1/2"5024-30-32 CAM-PP-E Polyprophylene 51 mm 2"5024-30-48 CAM-PP-E Polyprophylene 76 mm 3"

PRODUCT GROUP 504

PRODUCT GROUP 504

5025CAm-LOCK COUPLiNG F


5025-20-16 CAM-SS-F Stainless steel G 1" M5025-20-20 CAM-SS-F Stainless steel G 1 1/4" M5025-20-24 CAM-SS-F Stainless steel G 1 1/2" M5025-20-32 CAM-SS-F Stainless steel G 2" M5025-20-40 CAM-SS-F Stainless steel G 2 1/2" M5025-20-48 CAM-SS-F Stainless steel G 3" M5025-20-64 CAM-SS-F Stainless steel G 4" M

5025-30-16 CAM-PP-F Polyprophylene G 1" M5025-30-20 CAM-PP-F Polyprophylene G 1 1/4" M5025-30-24 CAM-PP-F Polyprophylene G 1 1/2" M5025-30-32 CAM-PP-F Polyprophylene G 2" M5025-30-48 CAM-PP-F Polyprophylene G 3" M

PRODUCT GROUP 504

PRODUCT GROUP 504



5026CAm-LOCK COUPLiNG DC

5028SEAL CAm-LOCK, NiTRiLE

NITRILE (Standard)

5027CAm-LOCK COUPLiNG DP

Part number Description Material Dim.

Part number Description Dim.

5026-00-16 CAM-AL-DC Aluminium 1"5026-00-20 CAM-AL-DC Aluminium 1 1/4"5026-00-24 CAM-AL-DC Aluminium 1 1/2"5026-00-32 CAM-AL-DC Aluminium 2"5026-00-40 CAM-AL-DC Aluminium 2 1/2"5026-00-48 CAM-AL-DC Aluminium 3"5026-00-64 CAM-AL-DC Aluminium 4"

5026-10-16 CAM-BR-DC Bronze 1"5026-10-20 CAM-BR-DC Bronze 1 1/4"5026-10-24 CAM-BR-DC Bronze 1 1/2"5026-10-32 CAM-BR-DC Bronze 2"5026-10-40 CAM-BR-DC Bronze 2 1/2"5026-10-48 CAM-BR-DC Bronze 3"5026-10-64 CAM-BR-DC Bronze 4"

5026-20-16 CAM-SS-DC Stainless steel 1"5026-20-20 CAM-SS-DC Stainless steel 1 1/4"5026-20-24 CAM-SS-DC Stainless steel 1 1/2"5026-20-32 CAM-SS-DC Stainless steel 2"5026-20-40 CAM-SS-DC Stainless steel 2 1/2"5026-20-48 CAM-SS-DC Stainless steel 3"5026-20-64 CAM-SS-DC Stainless steel 4"

5026-30-16 CAM-PP-DC Polyprophylene 1"5026-30-20 CAM-PP-DC Polyprophylene 1 1/4"5026-30-24 CAM-PP-DC Polyprophylene 1 1/2"5026-30-32 CAM-PP-DC Polyprophylene 2"5026-30-48 CAM-PP-DC Polyprophylene 3"

Part number Description Material Dim.

5027-00-16 CAM-AL-DP Aluminium 1"5027-00-20 CAM-AL-DP Aluminium 1 1/4"5027-00-24 CAM-AL-DP Aluminium 1 1/2"5027-00-32 CAM-AL-DP Aluminium 2"5027-00-40 CAM-AL-DP Aluminium 2 1/2"5027-00-48 CAM-AL-DP Aluminium 3"5027-00-64 CAM-AL-DP Aluminium 4"

5027-10-16 CAM-BR-DP Bronze 1"5027-10-20 CAM-BR-DP Bronze 1 1/4"5027-10-24 CAM-BR-DP Bronze 1 1/2"5027-10-32 CAM-BR-DP Bronze 2"5027-10-40 CAM-BR-DP Bronze 2 1/2"5027-10-48 CAM-BR-DP Bronze 3"5027-10-64 CAM-BR-DP Bronze 4"

5027-20-16 CAM-SS-DP Stainless steel 1"5027-20-20 CAM-SS-DP Stainless steel 1 1/4"5027-20-24 CAM-SS-DP Stainless steel 1 1/2"5027-20-32 CAM-SS-DP Stainless steel 2"5027-20-40 CAM-SS-DP Stainless steel 2 1/2"5027-20-48 CAM-SS-DP Stainless steel 3"5027-20-64 CAM-SS-DP Stainless steel 4"

5027-30-16 CAM-PP-DP Polyprophylene 1"5027-30-20 CAM-PP-DP Polyprophylene 1 1/4"5027-30-24 CAM-PP-DP Polyprophylene 1 1/2"5027-30-32 CAM-PP-DP Polyprophylene 2"5027-30-48 CAM-PP-DP Polyprophylene 3"

5028-00-08 Seal NITRILE 1/2"5028-00-12 Seal NITRILE 3/4"5028-00-16 Seal NITRILE 1"5028-00-20 Seal NITRILE 1 1/4"5028-00-24 Seal NITRILE 1 1/2"5028-00-32 Seal NITRILE 2"5028-00-40 Seal NITRILE 2 1/2"5028-00-48 Seal NITRILE 3"5028-00-64 Seal NITRILE 4"

PRODUCT GROUP 504

PRODUCT GROUP 504

PRODUCT GROUP 504

5029SEAL CAm-LOCK, EPDm

EPDM

Part number Description Dim.

5029-00-16 Seal EPDM 1"5029-00-20 Seal EPDM 1 1/4"5029-00-24 Seal EPDM 1 1/2"5029-00-32 Seal EPDM 2"5029-00-40 Seal EPDM 2 1/2"5029-00-48 Seal EPDM 3"5029-00-64 Seal EPDM 4"

PRODUCT GROUP 504



5

Part number Description Material Hose dim.



Part number Description Thread Hose dim.

Part number Description Thread Hose dim.

Part number Thread Description Hose dim.

5050-00-12 Safety clamps Aluminium 19 x 6 mm5050-00-16 Safety calmps Aluminium 25 x 6 mm5050-00-20 Safety calmps Aluminium 32 x 6 mm5050-00-24 Safety calmps Aluminium 38 x 6.5 mm5050-00-32 Safety calmps Aluminium 50 x 8 mm5050-00-40 Safety calmps Aluminium 63 x 8 mm5050-00-48 Safety calmps Aluminium 75 x 8 mm5050-00-64 Safety calmps Aluminium 100 x 8 mm5050-20-16 Safety calmps Stainless steel 25 x 6 mm5050-20-24 Safety calmps Stainless steel 38 x 6.5 mm5050-20-32 Safety calmps Stainless steel 50 x 8 mm5050-20-48 Safety calmps Stainless steel 75 x 8 mm

5022-50-12 CAM-SF-C DIN2828 Stainless steel 19 mm 5022-50-16 CAM-SF-C DIN2828 Stainless steel 25 mm5022-50-20 CAM-SF-C DIN2828 Stainless steel 32 mm5022-50-24 CAM-SF-C DIN2828 Stainless steel 38 mm5022-50-32 CAM-SF-C DIN2828 Stainless steel 50 mm5022-50-40 CAM-SF-C DIN2828 Stainless steel 63 mm5022-50-48 CAM-SF-C DIN2828 Stainless steel 75 mm

5024-50-12 CAM-SF-E DIN2828 Stainless steel 19 mm 5024-50-16 CAM-SF-E DIN2828 Stainless steel 25 mm5024-50-20 CAM-SF-E DIN2828 Stainless steel 32 mm5024-50-24 CAM-SF-E DIN2828 Stainless steel 38 mm5024-50-32 CAM-SF-E DIN2828 Stainless steel 50 mm5024-50-40 CAM-SF-E DIN2828 Stainless steel 63 mm5024-50-48 CAM-SF-E DIN2828 Stainless steel 75 mm

5051-20-16 Creamery coupling SMS G 1" UF 25 mm5051-20-20 Creamery coupling SMS G 1 1/4" UF 32 mm5051-20-24 Creamery coupling SMS G 1 1/2" UF 38 mm5051-20-32 Creamery coupling SMS G 2" UF 50 mm5051-20-48 Creamery coupling SMS G 3" UF 75 mm5051-20-64 Creamery coupling SMS G 4" UF 100 mm

5052-20-16 Creamery coupling SMS G 1" FS 25 mm5052-20-20 Creamery coupling SMS G 1 1/4" FS 32 mm5052-20-24 Creamery coupling SMS G 1 1/2" FS 38 mm5052-20-32 Creamery coupling SMS G 2" FS 50 mm5052-20-48 Creamery coupling SMS G 3" FS 75 mm5052-20-64 Creamery coupling SMS G 4" FS 100 mm

Stainless steel5053-20-12 G 3/4" M Hose tail-SF 19 mm5053-20-16 G 1" M Hose tail-SF 25 mm5053-20-20 G 1 1/4" M Hose tail-SF 32 mm5053-20-24 G 1 1/2" M Hose tail-SF 38 mm5053-20-32 G 2" M Hose tail-SF 50 mm5053-20-40 G 2 1/2" M Hose tail-SF 63 mm5053-20-48 G 3" M Hose tail-SF 75 mm5053-20-64 G 4" M Hose tail-SF 100 mm Brass5053-40-12 G 3/4" M Hose tail-MS 19 mm5053-40-16 G 1" M Hose tail-MS 25 mm5053-40-20 G 1 1/4" M Hose tail-MS 32 mm5053-40-24 G 1 1/2" M Hose tail-MS 38 mm5053-40-32 G 2" M Hose tail-MS 50 mm5053-40-48 G 3" M Hose tail-MS 75 mm5053-40-64 G 4" M Hose tail-MS 100 mm

5050SAFETY CLAmPS

5022-50CAm-LOCK COUPLiNG C

For safety claps

5024-50CAm-LOCK COUPLiNG E

For safety claps

5051-20CREAmERY COUPLiNG, m

For safety claps

5052-20CREAmERY COUPLiNG, FS

For safety claps

5053HOSE TAiL, m

For safety claps, DIN 2817

PRODUCT GROUP 504

PRODUCT GROUP 504

PRODUCT GROUP 504

PRODUCT GROUP 513

PRODUCT GROUP 513

PRODUCT GROUP 513

Part number Thread Description Hose dim.

Stainless steel5054-20-12 G 3/4" FS Hose tail-SF 19 mm5054-20-16 G 1" FS Hose tail-SF 25 mm5054-20-20 G 1 1/4" FS Hose tail-SF 32 mm5054-20-24 G 1 1/2" FS Hose tail-SF 38 mm5054-20-32 G 2" FS Hose tail-SF 50 mm5054-20-40 G 2 1/2" FS Hose tail-SF 63 mm5054-20-48 G 3" FS Hose tail-SF 75 mm5054-20-64 G 4" FS Hose tail-SF 100 mmBrass5054-40-12 G 3/4" FS Hose tail-MS 19 mm5054-40-16 G 1" FS Hose tail-MS 25 mm5054-40-20 G 1 1/4" FS Hose tail-MS 32 mm5054-40-24 G 1 1/2" FS Hose tail-MS 38 mm5054-40-32 G 2" FS Hose tail-MS 50 mm5054-40-48 G 3" FS Hose tail-MS 75 mm5054-40-64 G 4" FS Hose tail-MS 100 mm

5054HOSE TAiL, FS

For safety claps, DIN 2817

PRODUCT GROUP 513



5079-00-01CRimP RiNG

Water well drilling

Part number Female Male

5079-00-01 63 73

Swage diameter: 66 mmFerrule: 5079-00-02Hose: 1425-72/74-32

PRODUCT GROUP 501

5079-00-02CRimP PiPE

Water well drilling

Part number Description Connection

5079-00-02 Crimp pipe Atlas 2" MWhen swaging: Use two crimp rings (5079-00-01)

PRODUCT GROUP 501

5079-00-03FiNGER NUT

Water well drilling


5079-00-03 Winged nut Atlas 2" FTo be assembled with 5079-00-02

PRODUCT GROUP 501

5079-00-04CONNECTOR PiPEWater well drilling


5079-00-04 Connector pipeWhen swaging: Use two crimp rings (5079-00-01)

PRODUCT GROUP 501

5079-00-05SEAL

Water well drilling


5079-00-05 Seal for 5079-00-02

PRODUCT GROUP 501

5079-00-06COmPRESSOR ELbOw 90°

Water well drilling

Part number Connection

5079-00-06 Atlas 2" FS – Atlas 2" M

PRODUCT GROUP 501

5079-00-07COmPRESSOR COUPLiNG

Water well drilling


5079-00-07 Atlas 2" M – BSP 2" M

PRODUCT GROUP 501

5079-00-08COmPRESSOR COUPLiNG

Water well drilling


5079-00-08 Atlas 2" F – BSP 2" M

PRODUCT GROUP 501



5

5055PETROL TRUCK FiTTiNG, m

DIN 28450, male, stainless steel

Part number Description Type Size

5055-20-32 Gas truck fitting VK 50 /SS 2"5055-20-48 Gas truck fitting VK 80 /SS 3"5055-20-64 Gas truck fitting VK 100 /SS 4"

PRODUCT GROUP 513

5056PETROL TRUCK FiTTiNG, F

DIN 28450, female, stainless steel


5056-20-32 Gas truck fitting MK 50 /SS 2"5056-20-48 Gas truck fitting MK 80 /SS 3"5056-20-64 Gas truck fitting MK 100 /SS 4"

PRODUCT GROUP 513

5057COvER

FOR PETROL TRUCK FiTTiNG, mDIN 28450, male, stainless steel


5057-20-32 Cover for male part MB 50 /SS 2"5057-20-48 Cover for male part MB 80 /SS 3"

PRODUCT GROUP 513

5058COvER

FOR PETROL TRUCK FiTTiNG, FDIN 28450, female, stainless steel


5058-20-32 Cover for female part VB 50 /SS 2"5058-20-48 Cover for female part VB 80 /SS 3"

PRODUCT GROUP 513

5056-25LOCK RiNG FOR

PETROL TRUCK FiTTiNGDIN 28450, female, stainless steel


5056-25-32 Lock ring MKLR 50 /SS 2"5056-25-48 Lock ring MKLR 80 /SS 3"5056-25-64 Lock ring MKLR 100 /SS 4"

PRODUCT GROUP 513

5056-26SEAL RiNG FOR

PETROL TRUCK FiTTiNGDIN 28450, female, stainless steel


5056-26-32 Seal ring MKSR 50 /SS 2"5056-26-48 Seal ring MKSR 80 /SS 3"5056-26-64 Seal ring MKSR 100 /SS 4"

PRODUCT GROUP 513

5056-27/28SEAL RiNGS HAPALON/P.T.F.E.

FOR PETROL TRUCK FiTTiNGDIN 28450


5056-27-32 Hypalon seal TWHS 50 2"5056-27-48 Hypalon seal TWHS 80 3"5056-27-64 Hypalon seal TWHS 100 4"5056-28-32 P.T.F.E. seal TS 50 T 2"5056-28-48 P.T.F.E. seal TS 80 T 3"5056-28-64 P.T.F.E. seal TS 100 T 4"

PRODUCT GROUP 513

TW fittings are also available in other materials and dimensions.



5059-00FLANGE PN16 – SOLiD

For safety clamps


5059-00-24 Flange PN16 – solid 38 mm5059-00-32 Flange PN16 – solid 50 mm5059-00-40 Flange PN16 – solid 63 mm5059-00-48 Flange PN16 – solid 75 mm5059-00-64 Flange PN16 – solid 100 mm

PRODUCT GROUP 513

5059-20FLANGE PN16 – SOLiD, STAiNLESS

For safety clamps, stainless steel, AISI 316


5059-20-24 Flange PN16 – solid /SS 38 mm5059-20-32 Flange PN16 – solid /SS 50 mm5059-20-40 Flange PN16 – solid /SS 63 mm5059-20-48 Flange PN16 – solid /SS 75 mm5059-20-64 Flange PN16 – solid /SS 100 mm

PRODUCT GROUP 513

5059-50FLANGE PN16 – SwivEL

For safety clamps


5059-50-24 Flange PN16 – swivel 38 mm5059-50-32 Flange PN16 – swivel 50 mm5059-50-40 Flange PN16 – swivel 63 mm5059-50-48 Flange PN16 – swivel 75 mm5059-50-64 Flange PN16 – swivel 100 mm

PRODUCT GROUP 513

5059-70FLANGE PN16 – SwivEL, STAiNLESS

For safety clamps, stainless steel, AISI 316


5059-70-24 Flange PN16 – swivel /SS 38 mm5059-70-32 Flange PN16 – swivel /SS 50 mm5059-70-40 Flange PN16 – swivel /SS 63 mm5059-70-48 Flange PN16 – swivel /SS 75 mm5059-70-64 Flange PN16 – swivel /SS 100 mm

PRODUCT GROUP 513

5061-10STEAm COUPLiNG, m

Incl. safety clapms. DIN 2826. For hose 1454-30

Part number Thread Description Hose ID

5061-10-08 G 1/2" M Steam Coupling 1/2"5061-10-12 G 3/4" M Steam Coupling 3/4"5061-10-16 G 1" M Steam Coupling 1"5061-10-24 G 1 1/2" M Steam Coupling 1 1/2"5061-10-32 G 2" M Steam Coupling 2"

PRODUCT GROUP 501

5062-10STEAm COUPLiNG, F

Incl. safety clapms. DIN 2826. For hose 1454-30

Part number Thread Description Hose ID

5062-10-08 G 1/2" F Steam coupling 1/2"5062-10-12 G 3/4" F Steam coupling 3/4"5062-10-16 G 1" F Steam coupling 1"5062-10-24 G 1 1/2" F Steam coupling 1 1/2"5062-10-32 G 2" F Steam coupling 2"

PRODUCT GROUP 501

5062-90STEAm SEAL

DIN 2826


5062-90-08 Steam seal DIN 2826 1/2"5062-90-12 Steam seal DIN 2826 3/4"5062-90-16 Steam seal DIN 2826 1"5062-90-24 Steam seal DIN 2826 1 1/2"5062-90-32 Steam seal DIN 2826 2"

PRODUCT GROUP 501

important to remember while assembling steam couplings

1. The coupling insert is pushed into a transversely cut hose. Save a couple of millimeters to max. inpush because of the hose expansion.

2. The safety clamps should be assembled on the hose and fixed in the jaw lock.

3. Assemble the screws and tighten them.4. A small distance should appear on a parallel basis

between the clamp halves.5. Always follow-up draft the couplings after usage.

This should always be done on a regular basis.



5

Part number Description Size ID Thread

Part number Description Size ID Hose ID


5206-35-16 Female coupling 35 G 1" M*5206-42-16 Female coupling 42 G 1" M5206-51-20 Female coupling 51 G 1 1/4" M5206-64-32 Female coupling 64 G 2" M5206-64-40 Female coupling 64 G 2 1/2" M

* = One handle

5207-35-16 Female coupling 35 25 mm*5207-42-16 Female coupling 42 25 mm5207-51-22 Female coupling 51 35 mm5207-51-24 Female coupling 51 38 mm5207-64-32 Female coupling 64 50 mm

* = One handle

5208-35-16 Female coupling 35 25 mm*5208-42-16 Female coupling 42 25 mm5208-51-22 Female coupling 51 35 mm5208-51-24 Female coupling 51 38 mm5208-64-32 Female coupling 64 50 mm

* = One handle

5206CONCRETE COUPLiNG SYSTEm 22,

FEmALE, G-THREADED m


FEmALE PART FOR HOSESafety clamps.


FEmALE PART FOR HOSEAssembly with ferrule 5200.

PRODUCT GROUP 501

PRODUCT GROUP 501

PRODUCT GROUP 501


5201-35-16 Male coupling 35 G 1" F5201-41-16 Male coupling 41 G 1" F5201-41-20 Male coupling 41 G 1 1/4" F5201-50-16 Male coupling 50 G 1" F5201-50-20 Male coupling 50 G 1 1/4" F5201-50-24 Male coupling 50 G 1 1/2" F5201-50-32 Male coupling 50 G 2" F5201-63-20 Male coupling 63 G 1 1/4" F5201-63-24 Male coupling 63 G 1 1/2" F5201-63-32 Male coupling 63 G 2" F


mALE, G-THREADED F

PRODUCT GROUP 501


5202-35-16 Male coupling 35 G 1" M5202-41-16 Male coupling 41 G 1" M5202-50-20 Male coupling 50 G 1 1/4" M5202-63-32 Male coupling 63 G 2" M


mALE, G-THREADED m

PRODUCT GROUP 501


5203-35-16 Male coupling 35 25 mm5203-41-16 Male coupling 41 25 mm5203-50-22 Male coupling 50 35 mm5203-50-24 Male coupling 50 38 mm5203-63-32 Male coupling 63 50 mm

5203CONCRETE COUPLiNG SYSTEm 22

mALE PART FOR HOSESafety clamps.

PRODUCT GROUP 501


5205-35-16 Female coupling 35 G 1" F5205-42-16 Female coupling 42 G 1" F5205-51-16 Female coupling 51 G 1" F5205-51-20 Female coupling 51 G 1 1/4" F5205-51-24 Female coupling 51 G 1 1/2" F5205-64-32 Female coupling 64 G 2" F5205-64-40 Female coupling 64 G 2 1/2" F

* = One handle


FEmALE, G-THREADED F

PRODUCT GROUP 501


5209-35-16 Male coupling 35 25 mm5209-41-16 Male coupling 41 25 mm5209-50-22 Male coupling 50 35 mm5209-50-24 Male coupling 50 38 mm5209-63-32 Male coupling 63 50 mm


mALE PART FOR HOSEAssembly with ferrule 5200.

PRODUCT GROUP 501



Part number Description Size M Hose ID

5210-16-12 Male hose pipe 1" 19 mm5210-16-16 Male hose pipe 1" 25 mm5210-20-22 Male hose pipe 1 1/4" 35 mm5210-20-24 Male hose pipe 1 1/4" 38 mm5210-24-26 Male hose pipe 1 1/2" 42 mm5210-32-22 Male hose pipe 2" 35 mm5210-32-26 Male hose pipe 2" 42 mm5210-32-32 Male hose pipe 2" 50 mm

5210CONCRETE

COUPLiNG SYSTEm 22, mMale coupling for hose

PRODUCT GROUP 501

5200SwAGE FERRULE

For concrete coupling 5208 and 5209

5290CONCRETE COUPLiNG SEAL

Part number Description Hose Dim.


5200-00-12 Ferrule 19 x 65200-00-16 Ferrule 25 x 75200-00-22 Ferrule 35 x 75200-00-24 Ferrule 38 x 75200-00-26 Ferrule 42 x 75200-00-32 Ferrule 50 x 9

5290-00-35 Seal NBR5290-00-42 Seal NBR5290-00-51 Seal NBR5290-00-64 Seal NBR

PRODUCT GROUP 501

PRODUCT GROUP 501

Part number Thread 1 x Thread 2 RSK no.

5070-02-02 G 1/8" M G 1/8" M 19852095070-04-02 G 1/4" M G 1/8" M 19854075070-04-04 G 1/4" M G 1/4" M 19852175070-06-04 G 3/8" M G 1/4" M 19854235070-06-06 G 3/8" M G 3/8" M 19852255070-08-04 G 1/2" M G 1/4" M 19854495070-08-06 G 1/2" M G 3/8" M 19854565070-08-08 G 1/2" M G 1/2" M 19852335070-12-06 G 3/4" M G 3/8" M 19854805070-12-08 G 3/4" M G 1/2" M 19854985070-12-12 G 3/4" M G 3/4" M 19852585070-16-08 G 1" M G 1/2" M 19855225070-16-12 G 1" M G 3/4" M 19855305070-16-16 G 1" M G 1" M 19852745070-20-16 G 1 1/4" M G 1" M 19855895070-20-20 G 1 1/4" M G 1 1/4" M 19852825070-24-16 G 1 1/2" M G 1" M 19856215070-24-20 G 1 1/2" M G 1 1/4" M 19856395070-24-24 G 1 1/2" M G 1 1/2" M 19853085070-32-20 G 2" M G 1 1/4" M 19877345070-32-24 G 2" M G 1 1/2" M 19856885070-32-32 G 2" M G 2" M 19853165070-40-24 G 2 1/2" M G 1 1/2" M 19857125070-40-32 G 2 1/2" M G 2" M 19857205070-40-40 G 2 1/2" M G 2 1/2" M 19853245070-48-24 G 3" M G 1 1/2" M 19857795070-48-32 G 3" M G 2" M 19857615070-48-48 G 3" M G 3" M 19853325070-64-48 G 4" M G 3" M 19858295070-64-64 G 4" M G 4" M 1985340

5070DOUbLE NiPPLE, G m X G m

Brass

PRODUCT GROUP 506



5


Part number Thread 1 x 2 x 3 RSK no.

5071-04-02 G 1/4" M G 1/8" F 19860095071-06-02 G 3/8" M G 1/8" F 19860175071-06-04 G 3/8" M G 1/4" F 19860255071-08-02 G 1/2" M G 1/8" F 19860335071-08-04 G 1/2" M G 1/4" F 19860415071-08-06 G 1/2" M G 3/8" F 19860585071-12-04 G 3/4" M G 1/4" F 19860745071-12-06 G 3/4" M G 3/8" F 19860825071-12-08 G 3/4" M G 1/2" F 19860905071-16-08 G 1" M G 1/2" F 19861245071-16-12 G 1" M G 3/4" F 19861325071-20-12 G 1 1/4" M G 3/4" F 19861735071-20-16 G 1 1/4" M G 1" F 19861815071-24-12 G 1 1/2" M G 3/4" F 19862155071-24-16 G 1 1/2" M G 1" F 19862235071-24-20 G 1 1/2" M G 1 1/4" F 19862315071-32-20 G 2" M G 1 1/4" F 19862725071-32-24 G 2" M G 1 1/2" F 19862805071-40-24 G 2 1/2" M G 1 1/2" F 19863145071-40-32 G 2 1/2" M G 2" F 19863225071-48-24 G 3" M G 1 1/2" F 19863555071-48-32 G 3" M G 2" F 19863635071-48-40 G 3" M G 2 1/2" F 19863715071-64-32 G 4" M G 2" F 19864055071-64-48 G 4" M G 3" F 1986421

5073-02-02 G 1/8" F G 1/8" F G 1/8"F T 19842025073-04-04 G 1/4" F G 1/4" F G 1/4" F T 19842105073-06-06 G 3/8" F G 3/8" F G 3/8" F T 19842285073-08-08 G 1/2" F G 1/2" F G 1/2"F T 19842365073-12-12 G 3/4" F G 3/4" F G 3/4" F T 19842515073-16-16 G 1" F G 1" F G 1" F T 19842775073-20-20 G 1 1/4" F G 1 1/4" F G 1 1/4" F T 19842855073-24-24 G 1 1/2" F G 1 1/2" F G 1 1/2" F T 19843015073-32-32 G 2" F G 2" F G 2" F T 1984319

5071bUSHiNG, G m X G F

Brass

5073T-PiPE, G F X G F X G F T

Brass

PRODUCT GROUP 506

PRODUCT GROUP 506

Part number Thread Type Hose ID RSK no.

5074-04-04 G 1/4" M 1/4" 21741915074-04-06 G 1/4" M 3/8" 21743165074-04-08 G 1/4" M 1/2" 21743245074-06-04 G 3/8" M 1/4" 21743325074-06-06 G 3/8" M 3/8" 21742095074-06-08 G 3/8" M 1/2" 21743405074-08-06 G 1/2" M 3/8" 21743575074-08-08 G 1/2" M 1/2" 21742175074-08-10 G 1/2" M 5/8" 21742975074-08-12 G 1/2" M 3/4" 21743655074-10-10 G 5/8" M 5/8" 5074-12-08 G 3/4" M 1/2" 21743895074-12-12 G 3/4" M 3/4" 21742255074-12-16 G 3/4" M 1" 21743815074-16-12 G 1" M 3/4" 21743025074-16-16 G 1" M 1" 21742335074-20-16 G 1 1/4" M 1" 5074-20-20 G 1 1/4" M 1 1/4" 21742415074-20-24 G 1 1/4" M 1 1/2" 21743045074-24-20 G 1 1/2" M 1 1/4" 21747665074-24-24 G 1 1/2" M 1 1/2" 21742585074-24-32 G 1 1/2" M 2" 21743055074-32-32 G 2" M 2" 21742665074-40-40 G 2 1/2" M 2 1/2" 21742745074-48-48 G 3" M 3" 2174282

5074HOSE COUPLiNG, G m

Brass

PRODUCT GROUP 506


5076-02-02 G 1/8" F G 1/8" F T 19880055076-04-04 G 1/4" F G 1/4" F T 19880135076-06-06 G 3/8" F G 3/8" FT 19880215076-08-08 G 1/2" F G 1/2" F T 19880395076-12-12 G 3/4" F G 3/4" F Dc. 19880475076-16-16 G 1" F G 1" F Dc. 19880545076-20-20 G 1 1/4" F G 1 1/4" F Dc. 19880625076-24-24 G 1 1/2" F G 1 1/2" F Dc. 19880705076-32-32 G 2" F G2" F Dc. 19880885076-40-40 G 2 1/2" F G 2 1/2" F Dc. 19880965076-48-48 G 3" F G 3" F Dc. 19881045076-64-64 G 4" F G 4" F Dc. 1988120

5076SLEEvE, G F X G F

Brass. T = turned, Dc = Die casted

PRODUCT GROUP 506




5079-06-06 G 3/8" FS 3/8" 21744075079-08-06 G 1/2" FS 3/8" 21746055079-08-08 G 1/2" FS 1/2" 21744155079-12-08 G 3/4" FS 1/2" 21746215079-12-12 G 3/4" FS 3/4" 21744235079-16-08 G 1" FS 1/2" 21746475079-16-12 G 1" FS 3/4" 21746545079-16-16 G 1" FS 1" 21744315079-20-16 G 1 1/4" FS 1" 21746705079-20-20 G 1 1/4" FS 1 1/4" 21744495079-24-24 G 1 1/2" FS 1 1/2" 21744565079-32-32 G 2" FS 2" 21744645079-40-40 G 2 1/2" FS 2 1/2" 21744725079-48-48 G 3" FS 3" 2174480

5079HOSE COUPLiNG, G FS

Brass. With finger nut.

PRODUCT GROUP 506

Part number Type Thread RSK no.

Part number Type Hose ID RSK no.

5077-00-02 Plug T G 1/8" M 80700055077-00-04 Plug T G 1/4" M 80700135077-00-06 Plug T G 3/8" M 80700215077-00-08 Plug T G 1/2" M 80700395077-00-12 Plug T G 3/4" M 80700475077-00-16 Plug Dc G 1" M 80700545077-00-20 Plug Dc G 1 1/4" M 80700625077-00-24 Plug Dc G 1 1/2" M 80700705077-00-32 Plug Dc G 2" M 80700885077-00-40 Plug Dc. G 2 1/2" M 80700965077-00-48 Plug Dc G 3" M 80700975077-00-64 Plug Dc G 4" M 8070098

5078-04-04 Connector pipe 1/4" 21752025078-06-06 Connector pipe 3/8" 21752185078-08-08 Connector pipe 1/2" 21752265078-10-10 Connector pipe 5/8" 21752265078-12-12 Connector pipe 3/4" 21752425078-16-16 Connector pipe 1" 2175250

5077PLUG, G m

Brass. T = turned, Dc = Die casted

5078CONNECTOR PiPE

Brass. For hose.

PRODUCT GROUP 506

PRODUCT GROUP 506Part number Thread 1 Type Thread 2 RSK no.


5081-02-02 G 1/8" M 90F G 1/8" F 19828005081-04-04 G 1/4" M 90F G 1/4" F 19828185081-06-06 G 3/8" M 90F G 3/8" F 19828265081-08-08 G 1/2" M 90F G 1/2" F 19828345081-12-12 G 3/4" M 90F G 3/4" F 19828595081-16-16 G 1" M 90F G 1" F 19828755081-20-20 G 1 1/4" M 90F G 1 1/4" F 19828835081-24-24 G 1 1/2" M 90F G 1 1/2" F 19829095081-32-32 G 2" M 90F G 2" F 1982917

5080-08-08 G 1/2" FS 90° 1/2" 21748005080-12-06 G 3/4" FS 90° 3/8" 21748205080-12-08 G 3/4" FS 90° 1/2" 2174810

5080HOSE COUPLiNG, G FS 90°

Brass. With finger nut.

508190° ELbOw F – m

Brass

PRODUCT GROUP 506

PRODUCT GROUP 506


5082-04-04 G 1/4" F G 1/4" FS 19810185082-06-06 G 3/8" F G 3/8" FS 19810265082-08-08 G 1/2" F G 1/2" FS 19810345082-12-12 G 3/4" F G 3/4" FS 19810595082-16-16 G 1" F G 1" FS 19810755082-20-20 G 1 1/4" F G 1 1/4" FS 19810835082-24-24 G 1 1/2" F G 1 1/2" FS 19811095082-32-32 G 2" F G 2" FS 1981117

5082G F X G FS

Brass

PRODUCT GROUP 506



5

Part number Thread 1 Type Thread 2 RSK no.

5084-02-02 G 1/8" F 90F G 1/8" F 19820085084-04-04 G 1/4" F 90F G 1/4" F 19820165084-04-08 G 1/4" F 90F G 1/2" F 19821495084-06-06 G 3/8" F 90F G 3/8" F 19820245084-06-08 G 3/8" F 90F G 1/2" F 19821565084-08-08 G 1/2" F 90F G 1/2" F 19820325084-08-12 G 1/2" F 90F G 3/4" F 19821645084-12-12 G 3/4" F 90F G 3/4" F 19820575084-16-16 G 1" F 90F G 1" F 19820735084-20-20 G 1 1/4" F 90F G 1 1/4" F 19820815084-24-24 G 1 1/2" F 90F G 1 1/2" F 19821075084-32-32 G 2" F 90F G 2" F 1982115

508490° ELbOw F – F

Brass.

PRODUCT GROUP 506


5083-02-04 G 1/8" M G 1/4" F 19870075083-02-06 G 1/8" M G 3/8" F 19870235083-04-06 G 1/4" M G 3/8" F 19870155083-06-08 G 3/8" M G 1/2" F 19870495083-08-12 G 1/2" M G 3/4" F 19870725083-08-16 G 1/2" M G 1" F 19870985083-12-16 G 3/4" M G 1" F 19871065083-12-20 G 3/4" M G 1 1/4" F 19871225083-16-20 G 1" M G 1 1/4" F 19871305083-16-24 G 1" M G 1 1/2" F 19871625083-20-24 G 1 1/4" M G 1 1/2" F 19871635083-24-32 G 1 1/2" M G 2" F 1987502

5083bUSHiNG, G m X G F

Brass

PRODUCT GROUP 506

Part number Thread 1 x Thread 2

5070-02-02S G 1/8" M G 1/8" M5070-04-02S G 1/4" M G 1/8" M5070-04-04S G 1/4" M G 1/4" M5070-06-02S G 3/8" M G 1/8" M5070-06-04S G 3/8" M G 1/4" M5070-06-06S G 3/8" M G 3/8" M5070-08-02S G 1/2" M G 1/8" M5070-08-04S G 1/2" M G 1/4" M5070-08-06S G 1/2" M G 3/8" M5070-08-08S G 1/2" M G 1/2" M5070-12-02S G 3/4" M G 1/8" M5070-12-04S G 3/4" M G 1/4" M5070-12-06S G 3/4" M G 3/8" M5070-12-08S G 3/4" M G 1/2" M5070-12-12S G 3/4" M G 3/4" M5070-16-04S G 1" M G 1/4" M5070-16-06S G 1" M G 3/8" M5070-16-08S G 1" M G 1/2" M5070-16-12S G 1" M G 3/4" M5070-16-16S G 1" M G 1" M5070-20-04S G 1 1/4" M G 1/4"M5070-20-06S G 1 1/4" M G 3/8" M5070-20-08S G 1 1/4" M G 1/2"M5070-20-12S G 1 1/4" M G 3/4" M5070-20-16S G 1 1/4" M G 1"M5070-20-20S G 1 1/4" M G 1 1/4" M5070-24-04S G 1 1/2" M G 1/4" M5070-24-06S G 1 1/2" M G 3/8" M5070-24-08S G 1 1/2" M G 1/2" M5070-24-12S G 1 1/2" M G 3/4" M5070-24-16S G 1 1/2" M G 1" M5070-24-20S G 1 1/2" M G 1 1/4" M5070-24-24S G 1 1/2" M G 1 1/2" M5070-32-12S G 2" M G 3/4" M5070-32-16S G 2" M G 1" M5070-32-24S G 2" M G 1 1/2" M5070-32-32S G 2" M G 2" M5070-40-32S G 2 1/2" M G 2" M5070-40-40S G 2 1/2" M G 2 1/2" M5070-48-48S G 3" M G 3" M5070-64-64S G 4" M G 4" M

5070~SDOUbLE NiPPLE, G m X G m


PRODUCT GROUP 511




5071-04-02S G 1/4" M G 1/8" F5071-06-02S G 3/8" M G 1/8" F5071-06-04S G 3/8" M G 1/4" F5071-08-02S G 1/2" M G 1/8" F5071-08-04S G 1/2" M G 1/4" F5071-08-06S G 1/2" M G 3/8" F5071-12-02S G 3/4" M G 1/8" F5071-12-04S G 3/4" M G 1/4" F5071-12-06S G 3/4" M G 3/8" F5071-12-08S G 3/4" M G 1/2" F5071-16-04S G 1" M G 1/4" F5071-16-06S G 1" M G 3/8" F5071-16-08S G 1" M G 1/2" F5071-16-12S G 1" M G 3/4" F5071-20-08S G 1 1/4" M G 1/2"F5071-20-12S G 1 1/4" M G 3/4" F5071-20-16S G 1 1/4" M G 1"F5071-24-08S G 1 1/2" M G 1/2" F5071-24-12S G 1 1/2" M G 3/4" F5071-24-16S G 1 1/2" M G 1" F5071-24-20S G 1 1/2" M G 1 1/4" F5071-32-12S G 2" M G 3/4" F5071-32-16S G 2" M G 1" F5071-32-20S G 2" M G 1 1/4" F5071-32-24S G 2" M G 1 1/2" F5071-40-16S G 2 1/2" M G 1" F5071-40-20S G 2 1/2" M G 1 1/4" F5071-40-24S G 2 1/2" M G 1 1/2" F5071-40-32S G 2 1/2" M G 2" F5071-48-08S G 3" M G 1/2" F5071-48-12S G 3" M G 3/4" F5071-48-16S G 3" M G 1" F5071-48-20S G 3" M G 1 1/4" F5071-48-24S G 3" M G 1 1/2" F5071-48-32S G 3" M G 2" F5071-48-40S G 3" M G 2 1/2" F5071-64-08S G 4" M G 1/2" F5071-64-12S G 4" M G 3/4" F5071-64-16S G 4" M G 1" F5071-64-20S G 4" M G 1 1/4" F5071-64-24S G 4" M G 1 1/2" F5071-64-32S G 4" M G 2" F5071-64-40S G 4" M G 2 1/2" F5071-64-48S G 4" M G 3" F

5071~SbUSHiNG, G m X G FStainless steel AISI 316

PRODUCT GROUP 511

Part number Thread 1 x 2 x 3

5073-02-02S G 1/8" F G 1/8" F G 1/8" F5073-04-04S G 1/4" F G 1/4" F G 1/4" F5073-06-06S G 3/8" F G 3/8" F G 3/8" F5073-08-08S G 1/2" F G 1/2" F G 1/2" F5073-12-12S G 3/4" F G 3/4" F G 3/4" F5073-16-16S G 1" F G 1" F G 1" F5073-20-20S G 1 1/4" F G 1 1/4" F G 1 1/4" F5073-24-24S G 1 1/2" F G 1 1/2" F G 1 1/2" F5073-32-32S G 2" F G 2" F G 2" F5073-40-40S G 2 1/2" F G 2 1/2" F G 2 1/2" F5073-48-48S G 3" F G 3" F G 3" F

5073~ST-PiPE, G F X G F X G F


PRODUCT GROUP 511

5074~SHOSE NiPPLE, G m


5076~SbUSHiNG, G F


Part number Thread Hose ID


5074-04-04S G 1/4" M 1/4"5074-06-06S G 3/8" M 3/8"5074-08-08S G 1/2" M 1/2"5074-12-12S G 3/4" M 3/4"5074-16-16S G 1" M 1"5074-20-20S G1 1/4" M 1 1/4"5074-24-24S G 1 1/2" M 1 1/2"5074-32-32S G 2" M 2"5074-40-40S G 2 1/2" M 2 1/2"5074-48-48S G 3" M 3"5074-64-64S G 4" M 4"

5076-02-02S Bushing G 1/8" M5076-04-04S Bushing G 1/4" M5076-06-06S Bushing G 3/8"M5076-08-08S Bushing G 1/2"M5076-12-12S Bushing G 3/4" M5076-16-16S Bushing G 1" M5076-20-20S Bushing G 1 1/4" M5076-24-24S Bushing G 1 1/2" M5076-32-32S Bushing G 2" M5076-40-40S Bushing G 2 1/2" M5076-48-48S Bushing G 3" M5076-64-64S Bushing G 4" M

PRODUCT GROUP 511

PRODUCT GROUP 511



5


5077-00-02S Plug G 1/8" UF5077-00-04S Plug G 1/4" UF5077-00-06S Plug G 3/8" UF5077-08-08S Plug G 1/2" UF5077-00-12S Plug G 3/4" UF5077-00-16S Plug G 1" UF5077-00-20S Plug G 1 1/4" UF5077-00-24S Plug G 1 1/2" UF5077-00-32S Plug G 2" UF5077-00-40S Plug G 2 1/2" UF5077-00-48S Plug G 3" UF

5077~SPLUG mALE, G m


PRODUCT GROUP 506

Part number Thread 1 Thread 2


5081-02-02S G 1/8" F 90° G 1/8" M5081-04-04S G 1/4" F 90° G 1/4" M5081-06-06S G 3/8" F 90° G 3/8" M5081-08-08S G 1/2" F 90° G 1/2" M5081-12-12S G 3/4" F 90° G 3/4" M5081-16-16S G 1" F 90° G 1" M5081-20-20S G 1 1/4" F 90° G 1 1/4" M5081-24-24S G 1 1/2" F 90° G 1 1/2" M5081-32-32S G 2" F 90° G 2" M5081-40-40S G 2 1/2" F 90° G 2 1/2" M5081-48-48S G 3" F 90° G 3" M5081-64-64S G 4" F 90° G 4" M

5084-02-02S G 1/8" F 90° G 1/8" F5084-04-04S G 1/4" F 90° G 1/4" F5084-06-06S G 3/8" F 90° G 3/8" F5084-08-08S G 1/2" F 90° G 1/2" F5084-12-12S G 3/4" F 90° G 3/4" F5084-16-16S G 1" F 90° G 1" F5084-20-20S G 1 1/4" F 90° G 1 1/4" F5084-24-24S G 1 1/2" F 90° G 1 1/2" F5084-32-32S G 2" F 90° G 2" F5084-40-40S G 2 1/2" F 90° G 2 1/2" F5084-48-48S G 3" F 90° G 3" F

5081~S90° ELbOw F – m


5084~S90° ELbOw F – F


PRODUCT GROUP 511

PRODUCT GROUP 511



5085-02-02S G 1/8" F 45° G 1/8" F5085-04-04S G 1/4" F 45° G 1/4" F5085-06-06S G 3/8" F 45° G 3/8" F5085-08-08S G 1/2" F 45° G 1/2" F5085-12-12S G 3/4" F 45° G 3/4" F5085-16-16S G 1" F 45° G 1" F5085-20-20S G 1 1/4" F 45° G 1 1/4" F5085-24-24S G 1 1/2" F 45° G 1 1/2" F5085-32-32S G 2" F 45° G 2" F

5086-02-02S G 1/8" M 90° G 1/8"M5086-04-04S G 1/4" M 90° G 1/4"M5086-06-06S G 3/8" M 90° G 3/8"M5086-08-08S G 1/2" M 90° G1/2"M5086-12-12S G 3/4" M 90° G 3/4" M5086-16-16S G 1" M 90° G 1" M5086-20-20S G 1 1/4" M 90° G 1 1/4"M5086-24-24S G 1 1/2" M 90° G 1 1/2" M5086-32-32S G 2" M 90° G 2"M

5085~S45° ELbOw F – F


5086~S90° PiPE bEND, G m – G m


PRODUCT GROUP 511

PRODUCT GROUP 511

5087~SSTRAiGHT bUSHiNG F, G F



5087-02-02S Straight bushing G 1/8" F5087-04-04S Straight bushing G 1/4" F5087-06-06S Straight bushing G 3/8" F5087-08-08S Straight bushing G 1/2" F5087-12-12S Straight bushing G 3/4" F5087-16-16S Straight bushing G 1" F5087-20-20S Straight bushing G 1 1/4" F5087-24-24S Straight bushing G 1 1/2" F5087-32-32S Straight bushing G 2" F5087-40-40S Straight bushing G 2 1/2" F5087-48-48S Straight bushing G 3" F5087-64-64S Straight bushing G 4" F

PRODUCT GROUP 511



5089~SCROSS TUbE F, G F



5089-02-02S Cross tube G1/8" F5089-04-04S Cross tube G1/4" F5089-06-06S Cross tube G3/8" F5089-08-08S Cross tube G1/2" F5089-12-12S Cross tube G3/4" F5089-16-16S Cross tube G1" F5089-20-20S Cross tube G1 1/4" F5089-24-24S Cross tube G1 1/2" F5089-32-32S Cross tube G2" F

PRODUCT GROUP 511


5088-06-02S G 3/8" F G 1/8"F5088-08-02S G 1/2" F G 1/8"F5088-06-04S G 3/8" F G 1/4"F5088-08-04S G 1/2" F G 1/4"F5088-08-06S G 1/2" F G 3/8"F5088-12-06S G 3/4" F G 3/8"F5088-16-06S G 1" F G 3/4"F5088-12-08S G 3/4" F G 1/2"F 5088-16-08S G 1" F G 1/2"F5088-20-08S G 1 1/4" F G 1/2"F5088-24-08S G 1 1/2"F G 1/2"F5088-16-12S G 1" F G 3/4"F5088-20-12S G 1 1/4" F G 3/4"F5088-24-12S G 1 1/2" F G 3/4"F5088-32-12S G 2" F G 3/4"F5088-20-16S G 1 1/4" F G 1"F5088-24-16S G 1 1/2" F G 1"F5088-32-16S G 2" F G 1"F5088-24-20S G 1 1/2" F G 1 1/4"F5088-32-20S G 2" F G 1 1/4"F5088-40-20S G 2 1/2" F G 1 1/4"F5088-32-24S G 2" F G 1 1/2"F5088-40-24S G 2 1/2" F G 1 1/2"F5088-40-32S G 2 1/2" F G 2"F

5088~SbUSHiNG F – F


PRODUCT GROUP 511

5089-95~SPLUG FEmALE, G F


5089-96~SNUT, G F




5089-95-04S Plug G 1/4" F5089-95-06S Plug G 3/8" F5089-95-08S Plug G 1/2" F5089-95-12S Plug G 3/4" F5089-95-16S Plug G 1" F5089-95-20S Plug G 1 1/4" F5089-95-24S Plug G 1 1/2" F5089-95-32S Plug G 2" F5089-95-40S Plug G 2 1/2" F5089-95-48S Plug G 3" F5089-95-64S Plug G 4" F

5089-96-02S Nut G 1/8" F 5089-96-04S Nut G 1/4" F 5089-96-06S Nut G 3/8" F 5089-96-08S Nut G 1/2" F 5089-96-12S Nut G 3/4" F 5089-96-16S Nut G 1" F 5089-96-20S Nut G 1 1/4" F 5089-96-24S Nut G 1 1/2" F 5089-96-32S Nut G 2" F 5089-96-40S Nut G 2 1/2" F 5089-96-48S Nut G 3" F 5089-96-64S Nut G 4" F

PRODUCT GROUP 511

PRODUCT GROUP 511

Part number OD tap Thickness Thread

5090-10-04S 13.5 mm 2.3 mm G 1/4" M5090-10-06S 17.2 mm 2.3 mm G 3/8" M5090-10-08S 21.3 mm 2.6 mm G 1/2" M5090-10-12S 26.9 mm 2.6 mm G 3/4" M5090-10-16S 33.7 mm 3.2 mm G 1" M5090-10-20S 42.4 mm 3.2 mm G 1 1/4" M5090-10-24S 48.3 mm 3.2 mm G 1 1/2" M5090-10-32S 60.3 mm 3.6 mm G 2" M5090-10-40S 76.1 mm 3.6 mm G 2 1/2" M5090-10-48S 85.9 mm 4.0 mm G 3" M5090-10-64S 114.3 mm 4.5 mm G 4" M

5090-10~STHREADED wELDiNG

NiPPLE, G mBrass. For hose.

PRODUCT GROUP 511



5

5090-20~SNiPPLE PiPE m, G m


5090-30~SSCREw bUSHiNG m




5090-20-04S Nipple pipe G 1/4" M5090-20-06S Nipple pipe G 3/8" M5090-20-08S Nipple pipe G 1/2" M5090-20-12S Nipple pipe G 3/4" M5090-20-16S Nipple pipe G 1" M5090-20-20S Nipple pipe G 1 1/4" M5090-20-24S Nipple pipe G 1 1/2" M5090-20-32S Nipple pipe G 2" M5090-20-40S Nipple pipe G 2 1/2" M5090-20-48S Nipple pipe G 3" M5090-20-64S Nipple pipe G 4" M

5090-30-06S Screw bushing G 3/8" M5090-30-08S Screw bushing G 1/2" M5090-30-12S Screw bushing G 3/4" M5090-30-16S Screw bushing G 1" M5090-30-20S Screw bushing G 1 1/4" M5090-30-24S Screw bushing G 1 1/2" M5090-30-32S Screw bushing G 2" M5090-30-40S Screw bushing G 2 1/2" M5090-30-48S Screw bushing G 3" M

PRODUCT GROUP 511

PRODUCT GROUP 511

5095PETROL PUmP COUPLiNG,

mALE

5096PETROL PUmP COUPLiNG,

FEmALE

5096-16-99TOOL FOR PETROL PUmP COUPLiNGS

Part number Description Hose



5095-16-13 1" 19–235095-16-17 1" 25–37

5096-16-13 1" 19–235096-16-17 1" 25–37

5096-16-99 1" 19–37

PRODUCT GROUP 506

PRODUCT GROUP 506

PRODUCT GROUP 506



5555CASiNG FOR HOSE

Brass

Part number Connection Hose ID

5555-41-08x1 1/2" Female 1/2"5555-48-08x1 1/2" Female incl. valve 1/2"5555-53-12x1 3/4" Female 3/4"

PRODUCT GROUP 506

5555CASiNG G-THREAD, mALE

Brass

Part number Connection Thread

5555-60-08x1 1/2" Female 1/2"5555-60-12x1 1/2" Female 3/4"

PRODUCT GROUP 506

5555CASiNG G-THREAD,

FEmALEBrass


5555-40-08x1 1/2" Female 1/2"5555-40-12x1 1/2" Female 3/4"5555-40-22x1 1/2" Female 3/4", 1/2", M225555-54-12x1 3/4" Female 3/4"5555-65-01x1 3/8" Female excl. valve 3/8"

PRODUCT GROUP 506

5555HOSE NiPPLE

Brass

Part number Connection Hose ID

5555-43-08x1 1/2" Male 1/2"5555-49-08x1 1/2" Male 3/4", 1/2"5555-51-12x1 3/4" Male 3/4"

PRODUCT GROUP 506

5555COUPLiNG NiPPLE, G-THREAD, FEmALE

Brass


5555-44-08x1 1/2" Male 1/2"5555-44-12x1 1/2" Male 3/4", 1/2", M22x15555-55-08x1 3/4" Male 1/2"5555-55-12x1 3/4" Male 3/4"5555-65-02x1 3/8" Male excl. valve 3/8"

PRODUCT GROUP 506

5555TRANSiTiON NiPPLE,

G-THREAD mALE – m THREAD FEmALEBrass

Part number Thread 1 Thread2

5555-47-08x1 1/2" M 3/4" F5555-47-12x1 3/4" M 1/2" F

PRODUCT GROUP 506

5555COUPLiNG NiPPLE,

G-THREAD, mALEBrass


5555-46-08x1 1/2" Male 1/2"5555-46-12x1 1/2" Male 3/4"5555-61-12x1 3/4" Male 3/4"5555-61-08x1 3/8" Male 3/4"

PRODUCT GROUP 506



5

5555-63NOzzLE PiPE

Adjustable

5491-00wATER GUN, RUbbER COvER

Adjustable, blue rubber cover

5555-33wATER GUN, ERGO-DYNAmiC

Adjustable, ergo-dynamic

5555-50wATER GUN

Adjustable, temp: 80°C

5491FLUSH NOzzLE

5490-05HOSE HOLDER

Zinc

5555-32NOzzLE PiPE

Adjustable

Part number Description Connection Part number Description Connection



Part number Description Thread

Part number Description Hose length (1/2")


5555-63-08x1 Nozzle pipe, adjustable 1/2" Male 5491-00-04 Industry gun 1/2" F

5555-33-08 Industry gun 1/2" Female

5555-50-08 Flush gun 1/2" Male5555-50-12 Flush gun, on/off-control 3/4" Male5555-50-99 Start-set Flush gun 1/2" Male

5491-00-01 Flush nozzle, industry G 3/4" M5491-00-02 Flush nozzle, food G 3/4" M

5490-05-01 Hose holder zinc 30m5490-05-02 Hose holder zinc 60m

5555-32-08x1 Nozzle pipe, adjustable 3/4", 1/2"


PRODUCT GROUP 506

PRODUCT GROUP 506

PRODUCT GROUP 506

PRODUCT GROUP 506

PRODUCT GROUP 506



Part number Type ID Hole Part number Thread Type Dim.




5800-00-02 Ferrule NW 2 9.0 5.55800-00-03 Ferrule NW 3 10.0 6.25800-10-03 Ferrule NW 3 10.5 5.25800-10-02 Ferrule NW 2 10.5 6.25800-00-04 Ferrule NW 4 11.0 7.25800-10-04 Ferrule NW 4 11.5 7.35800-12-04 Ferrule NW 4 12.5 8.85800-00-05 Ferrule NW 4 13.0 7.75800-00-06 Ferrule NW 6 13.5 9.25800-10-06 Ferrule NW 6 14.5 9.35800-11-06 Ferrule NW 6 14.5 9.35800-10-08 Ferrule NW 8 15.0 11.25800-00-08 Ferrule NW 8 16.0 11.45800-00-09 Ferrule NW 8 17.0 11.45800-10-09 Ferrule NW 8 17.5 11.35800-00-10 Ferrule NW 10 18.0 14.25800-00-11 Ferrule NW 10 19.5 14.25800-00-12 Ferrule NW 10 20.0 14.25800-10-12 Ferrule NW 12 22.0 17.25800-00-13 Ferrule NW 13 23.0 17.25800-11-12 Ferrule NW 12 24.5 16.95800-00-14 Ferrule NW 13 24.5 17.25800-00-16 Ferrule NW 16 26.5 19.75800-11-16 Ferrule NW 16 30.0 23.75800-10-20 Ferrule NW 20 30.5 23.75800-00-20 Ferrule NW 20 32.0 23.75800-11-20 Ferrule NW 20 33.0 24.05800-00-25 Ferrule NW 25 40.0 29.6

5801-02-03 G 1/8" Nut NW 35801-04-04 G 1/4" Nut NW 45801-04-06 G 1/4" Nut NW 65801-06-08 G 3/8" Nut NW 85801-08-10 G 1/2" Nut NW 105801-08-13 G 1/2" Nut NW 135801-12-16 G 3/4" Nut NW 165801-16-20 G 1" Nut NW 20

5803-02-03 G 1/8" FS 90° NW 35803-04-04 G 1/4" FS 90° NW 45803-04-06 G 1/4" FS 90° NW 65803-06-08 G 3/8" FS 90° NW 85803-08-10 G 1/2" FS 90° NW 13/105803-08-13 G 1/2" FS 90° NW 135803-12-16 G 3/4" FS 90° NW 20/16

5810-02-04 G 1/8" M Flat NW 45810-04-04 G 1/4" M Flat NW 45810-04-06 G 1/4" M Flat NW 65810-06-08 G 3/8" M Flat NW 85810-08-10 G 1/2" M Flat NW 105810-08-13 G 1/2" M Flat NW 13

5820-10-03 M 10 x 1.0 SKL 5 NW 35820-12-04 M 12 x 1.5 SKL 6 NW 45820-14-06 M 14 x 1.5 SKL 8 NW 65820-16-08 M 16 x 1.5 SKL 10 NW 85820-18-10 M 18 x 1.5 SKL 12 NW 105820-22-13 M 22 x 1.5 SKL 15 NW 13

Description Hose ID mm

NW 2 3–4NW 3 4–5NW 4 5–6NW 6 7–8NW 8 9–10NW 10 11–12NW 13 14–15NW 16 17–18NW 20 21–22

5800LP HOSE FERRULE

5801G-THREADED NUT

5803LP HOSE FiTTiNG,

G-THREADED, FS 90°


G-THREADED, m FLAT

5820LP HOSE FiTTiNG, m-THREADED, SKL


PRODUCT GROUP 512

PRODUCT GROUP 512

PRODUCT GROUP 512



5

Part number Pipe Ø Type Hose ID


5826-04-02 4 mm SP NW 25826-05-03 5 mm SP NW 35826-06-04 6 mm SP NW 45826-08-06 8 mm SP NW 65826-10-08 10 mm SP NW 85826-12-10 12 mm SP NW 105826-15-13 15 mm SP NW 135826-18-16 18 mm SP NW 165826-22-20 22mm SP NW 20

5828-04-02 4 mm SP 45° NW 25828-05-03 5 mm SP 45° NW 35828-06-04 6 mm SP 45° NW 45828-08-06 8 mm Sp 45° NW 65828-10-08 10 mm SP 45° NW 85828-12-10 12 mm SP 45° NW 105828-15-13 15 mm SP 45° NW 135828-18-16 18 mm Sp 45° NW 165828-22-20 22 mm SP 45° NW 20


STAND PiPE

5828LP HOSE FiTTiNG, STAND PiPE 45°

PRODUCT GROUP 512

PRODUCT GROUP 512


5827-04-02 4 mm SP 90° NW 25827-05-03 5 mm SP 90° NW 35827-05-04 5 mm SP 90° NW 45827-06-04 6 mm SP 90° NW 45827-08-06 8 mm SP 90° NW 65827-10-08 10 mm SP 90° NW 85827-12-10 12 mm SP 90° NW 105827-15-13 15 mm SP 90° NW 135827-18-16 18 mm SP 90° NW 165827-22-20 22 mm SP 90° NW 20

5827LP HOSE FiTTiNG, STAND PiPE 90°

PRODUCT GROUP 512

Part number Thread Type Size


5829-10-03 M 10 x 1.0 Nut NW 35829-12-04 M 12 x 1.5 Nut NW 45829-14-06 M 14 x 1.5 Nut NW 65829-16-08 M 16 x 1.5 Nut NW 85829-18-10 M 18 x 1.5 Nut NW 105829-22-13 M 22 x 1.5 Nut NW 135829-26-16 M 26 x 1.5 Nut NW 16

5831-10-03 M 10 x 1.0 FS 90° NW 35831-12-04 M 12 x 1.5 FS 90° NW 45831-14-06 M 14 x 1.5 FS 90° NW 65831-16-08 M 16 x 1.5 FS 90° NW 85831-18-10 M 18 x 1.5 FS 90° NW 105831-22-13 M 22 x 1.5 FS 90° NW 135831-26-16 M 26 x 1.5 FS 90° NW 165831-30-20 M 30 x 1.5 FS 90° NW 20

5829m-THREADED NUT


m-THREADED, 90°

PRODUCT GROUP 512

PRODUCT GROUP 512


5830-10-02 M 10 x 1.0 M NW 25830-10-03 M 10 x 1.0 M NW 35830-12-04 M 12 x 1.5 M NW 45830-14-06 M 14 x 1.5 M NW 65830-16-08 M 16 x 1.5 M NW 85830-18-10 M 18 x 1.5 M NW 105830-22-13 M 22 x 1.5 M NW 135830-26-16 M 26 x 1.5 M NW 165830-30-20 M 30 x 2.0 M NW 20


m-THREADED, m

PRODUCT GROUP 512




5839-04-04 R 1/4" M NW 45839-04-06 R 1/4" M NW 65839-04-08 R 1/4" M NW 85839-06-04 R 3/8" M NW 45839-06-08 R 3/8" M NW 8


R-THREADED

PRODUCT GROUP 512


5840-02-04 NPT 1/8" M NW 45840-04-06 NPT 1/4" M NW 65840-04-08 NPT 1/4" M NW 85840-06-04 NPT 3/8" M NW 45840-06-08 NPT 3/8" M NW 85840-06-10 NPT 3/8" M NW 105840-08-13 NPT 1/2" M NW 13


NPT-THREADED

PRODUCT GROUP 512

Part number For bolt Type Hose ID Part number Type Thread


Part number For bolt Type Ø Pipe

Part number For bolt Type Hose ID

5882-08-03 M 8 x 1.0 Banjo 90° NW 35882-10-04 M 10 x 1.0 Banjo 90° NW 45882-12-06 M 12 x 1.5 Banjo 90° NW 65882-14-08 M 14 x 1.5 Banjo 90° NW 85882-16-10 M 16 x 1.5 Banjo 90° NW 105882-18-13 M 18 x 1.5 Banjo 90° NW 135882-22-16 M 22 x 1.5 Banjo 90° NW 165882-26-20 M 26 x 1.5 Banjo 90° NW 20

5885-00-08 Banjo bolt M 8x1.05885-00-10 Banjo bolt M 10x1.05885-00-12 Banjo bolt M 12x1.55885-00-14 Banjo bolt M 14x1.55885-00-16 Banjo bolt M 16x1.55885-00-18 Banjo bolt M 18x1.55885-00-22 Banjo bolt M 22x1.55885-00-26 Banjo bolt M 26x1.5

5886-00-02 Banjo bolt G 1/8"5886-00-04 Banjo bolt G 1/4"5886-00-06 Banjo bolt G 3/8"

5883-08-04 M 8 Banjo 4 mm5883-12-08 M 12 Banjo 8 mm5883-14-08 M 14 Banjo 8 mm5883-14-10 M 14 Banjo 10 mm5883-16-10 M 16 Banjo 10 mm5883-16-12 M 16 Banjo 12 mm5883-18-10 M 18 Banjo 10 mm5883-18-12 M 18 Banjo 12 mm5883-22-18 M 22 Banjo 18 mm

5884-08-03 M 8 Banjo NW 35884-08-04 M 8 Banjo NW 45884-10-04 M 10 Banjo NW 45884-10-06 M 10 Banjo NW 65884-12-04 M 12 Banjo NW 45884-12-06 M 12 Banjo NW 65884-14-04 M 14 Banjo NW 45884-14-06 M 14 Banjo NW 65884-14-08 M 14 Banjo NW 85884-16-08 M 16 Banjo NW 85884-16-10 M 16 Banjo NW 105884-18-08 M 18 Banjo NW 85884-18-10 M 18 Banjo NW 105884-18-13 M 18 Banjo NW 135884-22-10 M 22 Banjo NW 105884-22-13 M 22 Banjo NW 135884-22-16 M 22 Banjo NW 165884-26-20 M 26 Banjo NW 20

5882bANjO,

mETRiC 90°

5885bANjO bOLT, m-THREADED

5886bANjO bOLT, G-THREADED

5883bANjO,

wELDiNG

5884bANjO, mETRiC


PRODUCT GROUP 512

PRODUCT GROUP 512

PRODUCT GROUP 512



5

Part number Type Thread Part number Type Hose ID

5888-00-08 Double banjo bolt M8 x 1,05888-00-10 Double banjo bolt M10 x 1,05888-00-12 Double banjo bolt M12 x 1,55888-00-14 Double banjo bolt M14 x 1,55888-00-16 Double banjo bolt M16 x 1,55888-00-18 Double banjo bolt M18 x 1,5

5891-03-03 T-Nipple NW 3-3-35891-04-04 T-Nipple NW 4-4-45891-06-06 T-Nipple NW 6-6-65891-08-08 T-Nipple NW 8-8-8

5888 DOUbLE bANjO bOLT

FOR m-THREADEDFits 5884

5891 T NiPPLE

5889 bANjO, DiN 7641

60° female

5898DOUbLE bANjO

5890 NiPPLE



PRODUCT GROUP 512

Part number For bolt Type Thread Part number For bolt Type Hose ID

Part number For nut Hose ID

5889-10-04 M 10 Banjo M 12 x 1.55889-12-06 M 12 Banjo M 14 x 1.55889-14-08 M 14 Banjo M 16 x 1.55889-16-08 M 16 Banjo M 16 x 1.55889-16-10 M 16 Banjo M 18 x 1.55889-18-13 M 18 Banjo M 22 x 1.5

5898-08-03 M 8 Double banjo NW 35898-10-04 M 10 Double banjo NW 45898-12-06 M 12 Double banjo NW 65898-14-08 M 14 Double banjo NW 85898-16-10 M 16 Double banjo NW 10

5890-03-03 M 10 / G 1/8" NW 35890-04-03 M 12 / G 1/4" NW 35890-04-04 M 12 / G 1/4" NW 45890-04-06 M 12 / G 1/4" NW 65890-06-04 M 14 / G 1/4" NW 45890-06-06 M 14 / G 1/4" NW 65890-08-04 M 16 / G 3/8" NW 45890-08-06 M 16 / G 3/8" NW 65890-08-08 M 16 / G 3/8" NW 85890-10-08 M 18 / G 1/2" NW 85890-10-10 M 18 / G 1/2" NW 105890-13-10 M 22 / G 1/2" NW 105890-13-13 M 22 / G 1/2" NW 135890-20-20 M 30 / G 1" NW 20




5860-02-04 G 1/8" F 1/4"5860-04-04 G 1/4" F 1/4"5860-04-05 G 1/4" F 5/16"5860-04-06 G 1/4" F 3/8"5860-04-08 G 1/4" F 1/2"5860-06-06 G 3/8" F 3/8"5860-06-08 G 3/8" F 1/2"5860-06-10 G 3/8" F 5/8"5860-08-08 G 1/2" F 1/2"5860-08-10 G 1/2" F 5/8"5860-08-12 G 1/2" F 3/4"5860-12-08 G 3/4" F 1/2"5860-12-12 G 3/4" F 3/4"5860-12-16 G 3/4" F 1"5860-16-16 G 1" F 1"5860-16-20 G 1" F 1 1/4"5860-20-20 G 1 1/4" F 1 1/4"5860-20-24 G 1 1/4" F 1 1/2"5860-20-32 G 1 1/4" F 2"5860-24-20 G 1 1/2" F 1 1/4"5860-24-24 G 1 1/2" F 1 1/2"5860-24-32 G 1 1/2" F 2"

5865-02-04 G 1/8" M 1/4"5865-04-04 G 1/4" M 1/4"5865-04-05 G 1/4" M 5/16"5865-04-06 G 1/4" M 3/8"5865-04-08 G 1/4" M 1/2"5865-06-05 G 3/8" M 5/16"5865-06-06 G 3/8" M 3/8"5865-06-08 G 3/8" M 1/2"5865-06-10 G 3/8" M 5/8"5865-08-08 G 1/2" M 1/2"5865-08-10 G 1/2" M 5/8"5865-08-12 G 1/2" M 3/4"5865-12-08 G 3/4" M 1/2"5865-12-12 G 3/4" M 3/4"5865-12-16 G 3/4" M 1"5865-16-12 G 1" M 3/4"5865-16-16 G 1" M 1"5865-16-20 G 1" M 1 1/4"5865-20-20 G 1 1/4" M 1 1/4"5865-20-24 G 1 1/4" M 1 1/2"5865-20-32 G 1 1/4" M 2"5865-24-20 G 1 1/2" M 1 1/4"5865-24-24 G 1 1/2" M 1 1/2"5865-24-32 G 1 1/2" M 2"5865-32-32 G 2" M 2"5865-32-40 G 2" M 2 1/2"

5860LP HOSE FiTTiNG, G-THREADED, F

For two hose clamps.

5865LP HOSE FiTTiNG, G-THREADED, m

For two hose clamps.


According to the Marine Department According to the Marine Department

mARiNE HOSESFire approved fuel hoses for

commercial ships and recreation boats

Exhaust gas hoses

Decontimination hoses

Food hoses

SEE CHAPTER 1:4



5

5701UN FS wiTH O-RiNG

For AC hose 1445

PRODUCT GROUP 512


5701-10-05 5/8"-18 UNF FS AC 06 5/16"5701-12-06 3/4"-16 UNF FS AC 08 13/32"5701-14-08 7/8"-14 UNF FS AC 10 1/2"5701-14-10 7/8"-14 UNF FS AC 12 5/8"

5705UN 45° FS wiTH O-RiNG

For AC hose 1445

PRODUCT GROUP 512


5705-10-05 5/8"-18 UNF 45° FS AC 06 5/16"5705-12-06 3/4"-16 UNF 45° FS AC 08 13/32"5705-14-08 7/8"-14 UNF 45° FS AC 10 1/2"5705-14-10 7/8"-14 UNF 45° FS AC 12 5/8"

5702UN FS wiTH O-RiNG/vALvE

For AC hose 1445

PRODUCT GROUP 512


5702-10-05 5/8"-18 UNF FS AC 06 5/16"5702-12-06 3/4"-16 UNF FS AC 08 13/32"5702-14-08 7/8"-14 UNF FS AC 10 1/2"5702-14-10 7/8"-14 UNF FS AC 12 5/8"

5706UN 45° FS wiTH O-RiNG/vALvE

For AC hose 1445

PRODUCT GROUP 512



5703UN 90° FS wiTH O-RiNG

For AC hose 1445

PRODUCT GROUP 512



5707UN 90°T FS wiTH O-RiNG

For AC hose 1445

PRODUCT GROUP 512


5707-10-05 5/8"-18 UNF 90°T FS AC 06 5/16"5707-12-06 3/4"-16 UNF 90°T FS AC 08 13/32"5707-14-08 7/8"-14 UNF 90°T FS AC 10 1/2"5707-14-10 7/8"-14 UNF 90°T FS AC 12 5/8"

5704UN 90° FS wiTH O-RiNG/vALvE

For AC hose 1445

PRODUCT GROUP 512



5708UN 90°T FS wiTH O-RiNG/vALvE

For AC hose 1445

PRODUCT GROUP 512


5708-10-05 5/8"-18 UNF 90°T FS AC 06 5/16"



5741UN mS wiTH O-RiNG

For AC hose 1445

PRODUCT GROUP 512


5741-10-05 5/8"-18 UNF MS AC 06 5/16"5741-12-06 3/4"-18 UNS MS AC 08 13/32"5741-14-08 7/8"-18 UNS MS AC 10 1/2"

5746UN 45° mS wiTH O-RiNG/vALvE

For AC hose 1445

PRODUCT GROUP 512


5746-10-05 5/8"-18 UNF 45° MS AC 06 5/16"5746-12-06 3/4"-18 UNS 45° MS AC 08 13/32"5746-14-08 7/8"-18 UNS 45° MS AC 10 1/2"

5743UN 90° mS wiTH O-RiNG

For AC hose 1445

PRODUCT GROUP 512



5760HOSE CONNECTOR

For AC hose 1445

PRODUCT GROUP 512


5760-05-05 5/16" AC Hose connector 5/16"5760-06-06 13/32" AC Hose connector 13/32"5760-08-08 1/2" AC Hose connector 1/2"5760-10-10 5/8" AC Hose connector 5/8"

5744UN 90° mS wiTH O-RiNG/vALvE

For AC hose 1445

PRODUCT GROUP 512


5744-10-05 5/8"-18 UNF 90° MS AC 06 5/16"5744-12-06 3/4"-18 UNS 90° MS AC 08 13/32"

5761HOSE CONNECTOR wiTH vALvE

For AC hose 1445

PRODUCT GROUP 512


5761-05-05 5/16" AC Hose connector 5/16"5761-06-06 13/32" AC Hose connector 13/32"5761-08-08 1/2" AC Hose connector 1/2"5761-10-10 5/8" AC Hose connector 5/8"

5745UN 45° mS wiTH O-RiNG

For AC hose 1445

PRODUCT GROUP 512



5764AC O-RiNG

For AC couplings

PRODUCT GROUP 512


5764-00-10 O-ring for AC coupling 5/8"5764-00-12 O-ring for AC coupling 3/4"5764-00-14 O-ring for AC coupling 7/8"


5:01

HYDROSCAND HOSE CLAmPS

HOSE CLAmPS

PRODUCT GROUP 510

Today, there are great demands for hoses and couplings fitted in a safe and practical way. Hydroscand offers a large variety of different hose clamps – everything from the seashell-designed clamp for small areas to the powerful clamps used for large areas.Hydroscand also offers a wide range of solutions for fixed installations such as pipes and cables.Most of the clamps are available in different materials and designs to fit most installations.


TAbLE Of CONTENTS

HOSE CLAmPS PAGE

5561 Hose clamp 1765561-00 Hose clamp, mini 1765568 Hose clamp 1765565 Hose clamp 1775567 Hose clamp 1775566 Hose clamp 1775567-50 Super clamp 1775001-15 Hose clamp for compressed air fittings 1785560 Round bolt clamp 1785001-05 Hose clamp for compressed air fittings 1785001-06 Hose clamp safety for compressed air fittings 1785562 Rubber clamp 1785420 Tool for hose clamp 1795420-01 Hose clamp AISI 304 1795420-03 Hose clamp lock AISI 304 1795562-81 Pipe clamp, zinc 1805562-82 Pipe clamp, zinc 1805562-83 Pipe clamp, zinc 1805562-84 Pipe clamp, zinc 1805562-85 Pipe clamp, zinc 1805562-86 Pipe clamp, zinc 180

HYDROSCAND HOSE CLAmPS PRODUCT GROUP 510


5561HOSE CLAmP

5568HOSE CLAmP

According to DIN 3017

5561-00HOSE CLAmP, miNi

Band width 12 mm

Part number Dimension range Band width Part number Dimension range Band width

Part number Description Dim. range Band width

5561-08-14 8–14 mm 9 mm5561-11-17 11–17 mm 9 mm5561-13-20 13–20 mm 9 mm5561-15-24 15–24 mm 12 mm5561-19-28 19–28 mm 12 mm5561-22-32 22–32 mm 12 mm5561-26-38 26–38 mm 12 mm5561-32-44 32–44 mm 12 mm5561-38-50 38–50 mm 12 mm5561-44-56 44–56 mm 12 mm5561-50-65 50–65 mm 12 mm5561-58-75 58–75 mm 12 mm5561-68-85 68–85 mm 12 mm5561-77-95 77–95 mm 12 mm5561-91-12 87–112 mm 12 mm5561-91-38 104–138 mm 12 mm5561-91-65 130–165 mm 12 mm5561-91-80 150–180 mm 12 mm5561-92-05 175–205 mm 12 mm5561-92-31 200–231 mm 12 mm5561-92-56 226–256 mm 12 mm5561-92-82 251–282 mm 12 mm5561-93-07 227–307 mm 12 mm

5568-08-16 8–16 mm 9 mm5568-12-22 12–22 mm 9 mm5568-16-27 16–27 mm 12 mm5568-25-40 25–40 mm 12 mm5568-30-45 30–45 mm 12 mm5568-40-60 40–60 mm 12 mm5568-50-70 50–70 mm 12 mm5568-60-80 60–80 mm 12 mm5568-70-90 70–90 mm 12 mm5568-01-00 80–100 mm 12 mm5568-01-10 90–110 mm 12 mm5568-01-20 100–120 mm 12 mm5568-01-30 110–130 mm 12 mm5568-01-40 120–140 mm 12 mm5568-01-50 130–150 mm 12 mm5568-01-60 140–160 mm 12 mm

5561-00-08 Mini clamp 6-8 mm 12 mm5561-00-09 Mini clamp 7-9 mm 12 mm5561-00-10 Mini clamp 8-10 mm 12 mm5561-00-11 Mini clamp 9-11 mm 12 mm5561-00-12 Mini clamp 10-12 mm 12 mm5561-00-13 Mini clamp 11-13 mm 12 mm5561-00-14 Mini clamp 12-14 mm 12 mm5561-00-15 Mini clamp 13-15 mm 12 mm5561-00-16 Mini clamp 14-16 mm 12 mm5561-00-17 Mini clamp 15-17 mm 12 mm

PRODUCT GROUP 510 HYDROSCAND HOSE CLAmPS


5:01

5565HOSE CLAmP

PC 20-1, simple. Band width 20 mm

5566HOSE CLAmP

PC 20-2, double. Band width 20 mm

5567-50SUPER CLAmP

5567HOSE CLAmP

PC 25-2, double. Band width 25 mm

Part number Description Dim. range Band width Part number Description Dim. range Band width



5565-00-35 PC 20-1 30–36 mm 20 mm5565-00-40 PC 20-1 35–41 mm 20 mm5565-00-45 PC 20-1 40–46 mm 20 mm5565-00-55 PC 20-1 50–56 mm 20 mm5565-00-60 PC 20-1 55–61 mm 20 mm5565-00-65 PC 20-1 60–66 mm 20 mm5565-00-70 PC 20-1 65–71 mm 20 mm5565-00-75 PC 20-1 70 -76 mm 20 mm5565-00-80 PC 20-1 75–81 mm 20 mm5565-00-85 PC 20-1 80–86 mm 20 mm5565-00-90 PC 20-1 85–91 mm 20 mm5565-00-95 PC 20-1 90–96 mm 20 mm5565-01-00 PC 20-1 95–101 mm 20 mm5565-01-05 PC 20-1 100–106 mm 20 mm5565-01-10 PC 20-1 105–111 mm 20 mm5565-01-15 PC 20-1 110–116 mm 20 mm5565-01-20 PC 20-1 115–121 mm 20 mm5565-01-25 PC 20-1 120–126 mm 20 mm5565-01-30 PC 20-1 125–131 mm 20 mm5565-01-35 PC 20-1 130–136 mm 20 mm

5566-00-50 PC 20-2 41–51 mm 20 mm5566-00-55 PC 20-2 46–56 mm 20 mm5566-00-60 PC 20-2 51–61 mm 20 mm5566-00-65 PC 20-2 56–66 mm 20 mm5566-00-70 PC 20-2 61–71 mm 20 mm5566-00-80 PC 20-2 71–80 mm 20 mm

5567-50-19 Super clamp 17–19 mm 18 mm5567-50-22 Super clamp 20–22 mm 18 mm5567-50-25 Super clamp 23–25 mm 18 mm5567-50-28 Super clamp 26–28 mm 18 mm5567-50-31 Super clamp 29–31 mm 20 mm5567-50-35 Super clamp 32–35 mm 20 mm5567-50-39 Super clamp 36–39 mm 20 mm5567-50-43 Super clamp 40–43 mm 20 mm5567-50-47 Super clamp 44–47 mm 22 mm5567-50-51 Super clamp 48–51 mm 22 mm5567-50-55 Super clamp 52–55 mm 22 mm5567-50-59 Super clamp 56–59 mm 22 mm5567-50-63 Super clamp 60–63 mm 22 mm5567-50-67 Super clamp 64–67 mm 22 mm5567-50-73 Super clamp 68–73 mm 24 mm5567-50-79 Super clamp 74–79 mm 24 mm5567-50-85 Super clamp 80–85 mm 24 mm5567-50-91 Super clamp 86–91 mm 24 mm5567-50-97 Super clamp 92–97 mm 24 mm5567-51-03 Super clamp 98–103 mm 24 mm5567-51-12 Super clamp 104–112 mm 24 mm5567-51-21 Super clamp 113–121 mm 24 mm5567-51-30 Super clamp 122–130 mm 24 mm5567-51-39 Super clamp 131–139 mm 26 mm5567-51-48 Super clamp 140–148 mm 26 mm5567-51-61 Super clamp 149–161 mm 26 mm5567-51-74 Super clamp 162–174 mm 26 mm5567-51-87 Super clamp 175–187 mm 26 mm5567-52-00 Super clamp 188–200 mm 26 mm5567-52-13 Super clamp 201–213 mm 26 mm5567-52-26 Super clamp 214–226 mm 26 mm5567-52-39 Super clamp 227–239 mm 26 mm5567-52-52 Super clamp 240–252 mm 26 mm

5567-00-70 PC 25-2 61–71 mm 25 mm5567-00-75 PC 25-2 66–76 mm 25 mm5567-00-80 PC 25-2 71–81 mm 25 mm5567-00-85 PC 25-2 76–86 mm 25 mm5567-00-90 PC 25-2 81–91 mm 25 mm5567-00-95 PC 25-2 86–96 mm 25 mm5567-01-00 PC 25-2 91–101 mm 25 mm5567-01-05 PC 25-2 96–106 mm 25 mm5567-01-10 PC 25-2 101–111 mm 25 mm5567-01-15 PC 25-2 106–116 mm 25 mm5567-01-20 PC 25-2 111–121 mm 25 mm5567-01-25 PC 25-2 116–126 mm 25 mm5567-01-30 PC 25-2 121–131 mm 25 mm5567-01-35 PC 25-2 126–136 mm 25 mm5567-01-40 PC 25-2 131–141 mm 25 mm5567-01-45 PC 25-2 136–146 mm 25 mm5567-01-50 PC 25-2 141–151 mm 25 mm5567-01-55 PC 25-2 146–156 mm 25 mm5567-01-60 PC 25-2 151–161 mm 25 mm5567-01-65 PC 25-2 156–166 mm 25 mm5567-01-70 PC 25-2 161–171 mm 25 mm5567-01-80 PC 25-2 171–181 mm 25 mm5567-01-95 PC 25-2 180–195 mm 25 mm5567-02-00 PC 25-2 191–201 mm 25 mm5567-02-10 PC 25-2 201–211 mm 25 mm



5001-15HOSE CLAmP

fOR COmPRESSED AiR fiTTiNGS

With loose saddles

5001-05HOSE CLAmP


5001-06HOSE CLAmP SAfETY


5562RUbbER CLAmP

Band width 12.7 mm

5560ROUND bOLT CLAmP

Part number Description Dim. range Part number Description Dim. range

Part number Description Dim. range

Part number Description Dim. Band width

Part number Description Dim. range

5001-15-01 Hose clamp 17–22 mm5001-15-02 Hose clamp 20–29 mm5001-15-03 Hose clamp 28–35 mm5001-15-04 Hose clamp 32–40 mm5001-15-05 Hose clamp 39–49 mm5001-15-06 Hose clamp 48–60 mm5001-15-07 Hose clamp 60–76 mm5001-15-08 Hose clamp 77–94 mm5001-15-09 Hose clamp 94–115 mm5001-15-10 Hose clamp 115–145 mm

5001-05-01 Hose clamp 17–2 mm5001-05-02 Hose clamp 22–29 mm5001-05-03 Hose clamp 27–32 mm5001-05-04 Hose clamp 32–37 mm5001-05-05 Hose clamp 39–49 mm5001-05-06 Hose clamp 48–60 mm5001-05-07 Hose clamp 60–76 mm5001-05-08 Hose clamp 77 –94 mm5001-05-09 Hose clamp 94–115 mm

5001-06-03 Hose clamp safety 28–32 mm5001-06-04 Hose clamp safety 35–42 mm5001-06-06 Hose clamp safety 45–53 mm

5562-00-02 Rubber clamp 3 mm 12.7 mm5562-00-03 Rubber clamp 5 mm 12.7 mm5562-00-04 Rubber clamp 6 mm 12.7 mm5562-00-05 Rubber clamp 8 mm 12.7 mm5562-00-06 Rubber clamp 10 mm 12.7 mm5562-00-07 Rubber clamp 11 mm 12.7 mm5562-00-08 Rubber clamp 13 mm 12.7 mm5562-00-09 Rubber clamp 14 mm 12.7 mm5562-00-10 Rubber clamp 16 mm 12.7 mm5562-00-11 Rubber clamp 18 mm 12.7 mm5562-00-12 Rubber clamp 19 mm 12.7 mm5562-00-13 Rubber clamp 21 mm 12.7 mm5562-00-14 Rubber clamp 22 mm 12.7 mm5562-00-15 Rubber clamp 24 mm 12.7 mm5562-00-16 Rubber clamp 25 mm 12.7 mm5562-00-17 Rubber clamp 27 mm 12.7 mm5562-00-18 Rubber clamp 29 mm 12.7 mm5562-00-19 Rubber clamp 30 mm 12.7 mm5562-00-20 Rubber clamp 32 mm 12.7 mm5562-00-21 Rubber clamp 33 mm 12.7 mm5562-00-23 Rubber clamp 36 mm 12.7 mm5562-00-24 Rubber clamp 38 mm 12.7 mm5562-00-25 Rubber clamp 45 mm 12.7 mm5562-00-27 Rubber clamp 51 mm 12.7 mm5562-00-28 Rubber clamp 54 mm 12.7 mm5562-00-29 Rubber clamp 64 mm 12.7 mm5562-00-30 Rubber clamp 74 mm 12.7 mm

5560-00-36 Round bolt clamp 32–36 mm5560-00-46 Round bolt clamp 40–46 mm5560-00-54 Round bolt clamp 46–54 mm5560-00-62 Round bolt clamp 55–62 mm5560-00-69 Round bolt clamp 62–69 mm5560-00-74 Round bolt clamp 69–74 mm5560-00-81 Round bolt clamp 74–81 mm5560-00-88 Round bolt clamp 82–88 mm5560-00-94 Round bolt clamp 87–94 mm5560-00-98 Round bolt clamp 89–98 mm5560-01-05 Round bolt clamp 97–105 mm5560-01-16 Round bolt clamp 106–116 mm5560-01-23 Round bolt clamp 113–123 mm5560-01-32 Round bolt clamp 123–132 mm5560-01-40 Round bolt clamp 131–140 mm5560-01-50 Round bolt clamp 140–150 mm5560-01-62 Round bolt clamp 151–162 mm5560-01-70 Round bolt clamp 160–170 mm5560-01-88 Round bolt clamp 175–188 mm5560-02-04 Round bolt clamp 189–204 mm5560-02-15 Round bolt clamp 205–215 mm5560-02-31 Round bolt clamp 218–231 mm5560-02-40 Round bolt clamp 230–240 mm5560-02-55 Round bolt clamp 240–255 mm5560-02-78 Round bolt clamp 262–278 mm

PRODUCT GROUP 510 HYDROSCAND HOSE CLAmPS


5:01

5420TOOL fOR HOSE CLAmP

5420-01HOSE CLAmP AiSi 304

5420-03HOSE CLAmP LOCk

AiSi 304

Part number Description Part number Description Band width Length/coil

Part number Description Band width No./pack

5420-00-00 Tool for hose clamp 5420-01-08 Hose clamp stainless 1/2" 30 m5420-01-12 Hose clamp stainless 3/4" 30 m

5420-03-08 Hose clamp lock stainless 1/2" 1005420-03-12 Hose clamp lock stainless 3/4" 100



5562-81PiPE CLAmP, ziNC

BSL type 512. DIN 72573. 1 pipe


BSL type 512. DIN 72573. 4 pipe


BSL type 512. DIN 72573. 2 pipes







Part number Pipe diameter No. pipes Part number Pipe diameter No. pipes



5562-81-04 4 mm 15562-81-05 5 mm 15562-81-06 6 mm 15562-81-07 7 mm 15562-81-08 8 mm 15562-81-10 10 mm 15562-81-12 12 mm 15562-81-15 15 mm 15562-81-18 18 mm 15562-81-20 20 mm 15562-81-22 22 mm 1

5562-84-04 4 mm 45562-84-05 5 mm 45562-84-06 6 mm 45562-84-07 7 mm 45562-84-08 8 mm 45562-84-10 10 mm 45562-84-12 12 mm 45562-84-15 15 mm 45562-84-18 18 mm 4

5562-82-05 5 mm 25562-82-06 6 mm 25562-82-07 7 mm 25562-82-08 8 mm 25562-82-10 10 mm 25562-82-12 12 mm 25562-82-15 15 mm 25562-82-18 18 mm 25562-82-20 20 mm 25562-82-22 22 mm 2

5562-85-04 4 mm 55562-85-05 5 mm 55562-85-06 6 mm 55562-85-07 7 mm 55562-85-08 8 mm 55562-85-10 10 mm 55562-85-12 12 mm 5

5562-83-04 4 mm 35562-83-05 5 mm 35562-83-06 6 mm 35562-83-07 7 mm 35562-83-08 8 mm 35562-83-10 10 mm 35562-83-12 12 mm 35562-83-15 15 mm 35562-83-18 18 mm 35562-83-20 20 mm 35562-83-22 22 mm 3

5562-86-04 4 mm 65562-86-05 5 mm 65562-86-06 6 mm 65562-86-07 7 mm 65562-86-08 8 mm 65562-86-10 10 mm 6


5:05

HYDROSCAND ACCESSORIES

PRODUCT GROUP 505

TAbLE Of CONTENTS

ACCESSORIES PAGE

ACCESSORIES

This product group includes products that complement Hydroscand's range of hoses and fluid connectors, for example:

– Hose protection from external ab, comes in several designs.

– Web slings and cargo lashing equip. for safer trans-portation and lifts.

– Straps and cable ties for the hose package.

– Hose reels for safe and rational hose handling.

Hydroscand also offers lubricating equipment, fluids for thread sealing, flange sealing, oils and grease.

5905 Cambuckle Strap 1825906 Cable Tie 1825521 Steel Spiral 1825523 Plastic Spiral 1825524 Hose Protection 1825526 Hose Protection 1835524-00-001 Complete Hose Protection Rack 1835526-6 Textile Hose Protection 1835526-7 Sealable Textile Hose Protection 1835525 Fire Sleeve For Hose 1845528 Stainless Steel Braid 1845527 Crimp Hose PVC 1845770 Rubber Protection for cleaning hoses 1845528-10 / 5528-20 Support Plait Single / Open 1845490 Suction Strainer 1845528 Whipcheck 1845490-10 Non-Return Valve, Brass 1855490-20 Foot-Valve Brass With Strainer 1855531-00 Protection Plug – UNF M 1855530-01 Protection Plug – Tapered 1855531-01 Protection Cap – UNF F 1855532-03 Protection Plug – KS 1865534-03/06 Protection Cap - SAE Flange 1865533-00 Protection Plug – G M 1865533-01 Protection Cap – G F 1865660-30 Thread Sealtread Lockflange Seal etc 1865650 Thread Tape 1868258 Premium Hi-Temp Lubricant 187825x Oil 1875902 Grease Equipment 18754xx Hose Reels 1875601-00 Assortment Boxs 1885995 Enviromental Oil Plug 188

5601 Steel Bonded Steel Washer 1885610 O-Rings 1895620 Copper Plate 189

O-RINGS AND SEALS PAGE

ACCESSORIES PRODUCT GROUP 505


Part no. Description ID

5521-00-13 Steel spiral 13 mm5521-00-15 Steel spiral 15 mm5521-00-17 Steel spiral 17 mm5521-00-19 Steel spiral 19 mm5521-00-23 Steel spiral 23 mm5521-00-26 Steel spiral 26 mm

5521-00-29 Steel spiral 29 mm5521-00-34 Steel spiral 34 mm5521-00-41 Steel spiral 41 mm5521-00-48 Steel spiral 48 mm5521-00-54 Steel spiral 54 mm

Part no. Description ID Thickness

5523-00-06 Plastspiral 6.4 mm 1.2 mm5523-00-09 Plastspiral 12.7 mm 1.6 mm5523-00-19 Plastspiral 19.0 mm 1.6 mm5523-00-25 Plastspiral 25.0 mm 2.4 mm

Part no. Description Length Width pcs/pack

5906-00-09 Cable tie 95 2.5 200 st5906-00-15 Cable tie 150 3.5 100 st5906-00-19 Cable tie 200 3.5 100 st5906-00-20 Cable tie 200 4.6 100 st5906-00-27 Cable tie 300 4.6 100 st5906-00-38 Cable tie 385 7.6 100 st

5906-00-39 Cable tie 385 4.6 100 st5906-00-45 Cable tie 450 7.6 100 st5906-00-53 Cable tie 533 8.9 100 st5906-00-55 Cable tie 540 13.0 50 st5906-00-75 Cable tie 755 7.6 50 st

Part no. Description Length

5905-04-05 Cambuckle strap 500 mm5905-04-07 Cambuckle strap 750 mm5905-04-10 Cambuckle strap 1000 mm5905-04-20 Cambuckle strap 2000 mm

Part no. Hose dim. Length Thickness Colour

5524-00-016 11 - 17 mm 6 m 1.6 mm Yellow5524-00-020 17 - 21 mm 6 m 2.0 mm Yellow5524-00-025 21 - 27 mm 6 m 2.5 mm Yellow5524-00-032 27 - 35 mm 6 m 2.5 mm Yellow5524-00-040 35 - 42 mm 6 m 3.0 mm Yellow5524-00-050 42 - 58 mm 6 m 3.0 mm Yellow5524-00-075 58 - 70 mm 6 m 4.0 mm Yellow5524-00-090 70 - 90 mm 6 m 4.5 mm Yellow5524-00-110 90 - 115 mm 6 m 5.0 mm Yellow5524-00-140 115 - 135 mm 6 m 5.5 mm Yellow5524-00-160 135 - 165 mm 6 m 5.5 mm Yellow5524-00-200 165 - 220 mm 6 m 5.5 mm Yellow

5524-25-040 35 - 42 mm 25 m 3.0 mm Yellow5524-25-050 42 - 58 mm 25 m 3.0 mm Yellow

5524-50-016 11 - 17 mm 50 m 1.6 mm Yellow5524-50-020 17 - 21 mm 50 m 2.0 mm Yellow5524-50-025 21 - 27 mm 50 m 2.5 mm Yellow5524-50-032 27 - 35 mm 50 m 2.5 mm Yellow

5524-10-016 11 - 17 mm 1 m 1.6 mm Yellow5524-10-020 17 - 21 mm 1 m 2.0 mm Yellow5524-10-025 21 - 27 mm 1 m 2.5 mm Yellow5524-10-032 27 - 35 mm 1 m 2.5 mm Yellow5524-10-040 35 - 42 mm 1 m 2.5 mm Yellow5524-10-050 42 - 58 mm 1 m 3.0 mm Yellow5524-10-075 58 - 70 mm 1 m 4.0 mm Yellow5524-10-090 70 - 90 mm 1 m 4.5 mm Yellow5524-10-110 90 - 115 mm 1 m 5.0 mm Yellow5524-10-140 115 - 135 mm 1 m 5.5 mm Yellow5524-10-160 135 - 165 mm 1 m 5.5 mm Yellow5524-10-200 165 - 220 mm 1 m 5.5 mm Yellow

5523PLASTIC SPIRAL

Black, flat Hose and cable protection

5521STEEL SPIRAL

Flat Only available in whole meters

5906CAbLE TIE

5905CAmbUCkLE STRAP

5524HOSE PROTECTION

Yellow, flat The hose protection will crimp during storage and tranporta-tion, but will stretch to the right dimension during assembly.

PRODUCT GROUP 505 ACCESSORIES


5:05

5526HOSE PROTECTION

Black, flat The hose protection will crimp during storage and tranporta-tion, but will stretch to the right dimension during assembly.

Part no. Hose dim. Length Thickness Colour

5526-00-016 11 - 17 mm 6 m 1.6 mm Black5526-00-020 17 - 21 mm 6 m 2.0 mm Black5526-00-025 21 - 27 mm 6 m 2.5 mm Black5526-00-032 27 - 35 mm 6 m 2.5 mm Black5526-00-040 35 - 42 mm 6 m 3.0 mm Black5526-00-050 42 - 58 mm 6 m 3.0 mm Black5526-00-075 58 - 70 mm 6 m 4.0 mm Black5526-00-090 70 - 90 mm 6 m 4.5 mm Black5526-00-110 90 - 115 mm 6 m 5.0 mm Black5526-00-140 115 - 135 mm 6 m 5.5 mm Black5526-00-160 135 - 165 mm 6 m 5.5 mm Black5526-00-200 165 - 220 mm 6 m 5.5 mm Black

5526-25-040 35 - 42 mm 25 m 3.0 mm Black5526-25-050 42 - 58 mm 25 m 3.0 mm Black

5526-50-016 11 - 17 mm 50 m 1.6 mm Black5526-50-020 17 - 21 mm 50 m 2.0 mm Black5526-50-025 21 - 27 mm 50 m 2.5 mm Black5526-50-032 27 - 35 mm 50 m 2.5 mm Black

5526-10-016 11- 17 mm 1 m 1.6 mm Black5526-10-020 17 - 21 mm 1 m 2.0 mm Black5526-10-025 21 - 27 mm 1 m 2.5 mm Black5526-10-032 27 - 35 mm 1 m 2.5 mm Black5526-10-040 35 - 42 mm 1 m 3.0 mm Black5526-10-050 42 - 58 mm 1 m 3.0 mm Black5526-10-075 58 - 70 mm 1 m 4.0 mm Black5526-10-090 70 - 90 mm 1 m 4.5 mm Black5526-10-110 90 - 115 mm 1 m 5.0 mm Black5526-10-140 115 - 135 mm 1 m 5.5 mm Black5526-10-160 135 - 165 mm 1 m 5.5 mm Black5526-10-200 165 - 220 mm 1 m 5.5 mm Black

Other colours are available upon request

5524-00-001COmPLETE HOSE

PROTECTION RACk

Floor rack for 1 meter lengths

Part no. Number of hose protections Colour

5524-00-001 Complete hose protection rack including:5524-10-020 10 pcs Yellow5524-10-025 10 pcs Yellow5524-10-032 10 pcs Yellow5524-10-050 7 pcs Yellow5524-10-075 5 pcs Yellow5524-10-090 4 pcs Yellow5524-10-110 3 pcs Yellow5526-10-020 10 pcs Black5526-10-025 10 pcs Black5526-10-032 10 pcs Black5526-10-050 7 pcs Black5526-10-075 5 pcs Black5526-10-090 4 pcs Black5526-10-110 3 pcs Black

5526-6TExTILE

HOSE PROTECTION

Nylon fibre weave

Part no. Round diameter Flat diameter

5526-60-23 23 mm 36 mm5526-60-25 25 mm 39 mm5526-60-27 27 mm 42 mm5526-60-31 31 mm 49 mm5526-60-36 36 mm 54 mm5526-60-40 40 mm 63 mm5526-60-53 53 mm 83 mm5526-60-60 60 mm 94 mm5526-60-73 73 mm 115 mm

5526-7SEALAbLE TExTILE HOSE PROTECTION

Fiberglass covered silicone with burdock seal

Part no. Round diameter Flat diameter

5526-70-50 50 mm 78 mm5526-71-00 100 mm 157 mm5526-71-50 150 mm 235 mm5526-72-00 200 mm 314 mm

Quick list – Correct protection & hose

Part no. Fits hose size552x-xx-016 3/16"552x-xx-016 1/4"552x-xx-020 3/8"552x-xx-025 1/2"552x-xx-032 3/4"552x-xx-040 1"552x-xx-050 1 1/4"552x-xx-075 1 1/2"552x-xx-075 2"552-x-xx-090 2" 6 steel spiral hose



Part no. Description Dimension

5528-01-02 Hose to hose 1/2" - 1 1/4"5528-01-04 Hose to hose 1 1/2" - 3"

5528-10 / 5528-20SUPPORT PLAIT SINGLE / OPEN


5770RUbbER PROTECTION

For cleaning hoses

Part no. Description Colour ID

5770-01-15 Rubber protection Black 15 mm5770-01-17 Rubber protection Black 17 mm5770-01-18 Rubber protection Black 18 mm5770-01-22 Rubber protection Black 22 mm5770-02-15 Rubber protection Blue 15 mm5770-02-18 Rubber protection Blue 18 mm5770-02-22 Rubber protection Blue 22 mm

5490SUCTION STRAINER


5490-00-24 Suction strainer 1 1/2"5490-00-32 Suction strainer 2"5490-00-48 Suction strainer 3"5490-00-64 Suction strainer 4"

5528WHIPCHECk

Safety cable

5528-10-20 Support plait, open 10 - 20 mm5528-10-30 Support plait, open 20 - 30 mm5528-10-40 Support plait, open 30 - 40 mm5528-10-50 Support plait, open 40 - 50 mm5528-10-65 Support plait, open 50 - 65 mm5528-10-80 Support plait, open 65 - 80 mm

5528-20-20 Support plait, single 10 - 20 mm5528-20-30 Support plait, single 20 - 30 mm5528-20-40 Support plait, single 30 - 40 mm5528-20-50 Support plait, single 40 - 50 mm5528-20-65 Support plait, single 50 - 65 mm5528-20-80 Support plait, single 65 - 80 mm

Part no. ID Thickness

5525-00-06 10 mm 4 mm5525-00-08 13 mm 4 mm5525-00-10 16 mm 4 mm5525-00-12 19 mm 4 mm5525-00-14 22 mm 4 mm5525-00-16 25 mm 4 mm5525-00-18 28 mm 4 mm5525-00-20 32 mm 4 mm5525-00-22 35 mm 4 mm5525-00-24 38 mm 4 mm5525-00-28 44 mm 4 mm5525-00-32 51 mm 4 mm5525-00-39 57 mm 4 mm

Part no. Description Max ID Min ID Length/pack

5527-00-19 Crimp hose 19 12 50 m5527-00-24 Crimp hose 24 15 50 m5527-00-29 Crimp hose 29 18 50 m5527-00-35 Crimp hose 35 21 50 m5527-00-41 Crimp hose 41 25 50 m5527-00-48 Crimp hose 48 29 50 m5527-00-56 Crimp hose 56 34 50 m5527-00-66 Crimp hose 66 40 50 m

Part no. Description ID kg/m

5528-00-12 Stainless steel braid 12 mm 0.0905528-00-16 Stainless steel braid 16 mm 0.1355528-00-19 Stainless steel braid 19 mm 0.1405528-00-24 Stainless steel braid 24 mm 0.2405528-00-29 Stainless steel braid 29 mm 0.2405528-00-35 Stainless steel braid 35 mm 0.3055528-00-44 Stainless steel braid 44 mm 0.4805528-00-53 Stainless steel braid 53 mm 0.6105528-00-66 Stainless steel braid 66 mm 0.7005528-00-86 Stainless steel braid 86 mm 1.2005528-00-98 Stainless steel braid 98 mm 1.410

5525fIRE SLEEvE fOR HOSE

Fiberglass/silicone -65° – +260°C; Temporarily: (15 min.) +1050°C

5527CRImP HOSE PvC

Black Crimp temperature: 100 – 115 °C

Crimp capacity, diametrical: 35 – 50 % Crimp capacity , on the length: 5 – 15 %

5528STAINLESS STEEL bRAID



5:05

5531-01PROTECTION CAP – UNf f

Yellow

5531-01-07 Protective cover 7/16" - 20 UNF F5531-01-08 Protective cover 1/2" - 20 UNF F5531-01-09 Protective cover 9/16" - 18 UNF F5531-01-12 Protective cover 3/4" - 16 UNF F5531-01-14 Protective cover 7/8" - 14 UNF F5531-01-17 Protective cover 1 1/16" - 12 UNF F5531-01-19 Protective cover 1 3/16" - 12 UNF F5531-01-21 Protective cover 1 5/16" - 12 UNF F5531-01-26 Protective cover 1 5/8" - 12 UNF F5531-01-30 Protective cover 1 7/8" - 12 UNF F

Part no. Description Thread

5530-01PROTECTION PLUG – TAPERED

Red

5530-01-10 Protection plug 8.2 - 9.45530-01-11 Protection plug 9.2 - 10.65530-01-12 Protection plug 9.9 - 11.15530-01-15 Protection plug 10.8 - 12.65530-01-16 Protection plug 11.6 - 13.05530-01-17 Protection plug 12.4 - 13.95530-01-18 Protection plug 13.0 - 14.25530-01-20 Protection plug 14.1 - 15.95530-01-25 Protection plug 14.5 - 16.15530-01-27 Protection plug 15.4 - 17.25530-01-30 Protection plug 17.0 - 19.05530-01-35 Protection plug 18.0 - 20.25530-01-36 Protection plug 19.4 - 21.35530-01-37 Protection plug 20.2 - 22.05530-01-38 Protection plug 21.5 - 23.55530-01-40 Protection plug 22.4 - 25.35530-01-41 Protection plug 24.0 - 25.75530-01-42 Protection plug 25.2 - 27.25530-01-44 Protection plug 27.4 - 28.75530-01-45 Protection plug 27.8 - 30.55530-01-50 Protection plug 29.4 - 31.85530-01-52 Protection plug 31.0 - 33.25530-01-55 Protection plug 33.2 - 35.05530-01-60 Protection plug 38.0 - 40.45530-01-65 Protection plug 41.5 - 43.95530-01-70 Protection plug 44.0 - 46.85530-01-75 Protection plug 47.2 - 49.75530-01-76 Protection plug 49.1 - 51.5


5531-00PROTECTION PLUG – UNf m

Yellow

5531-00-07 Protection plug 7/16" - 20 UNF M5531-00-08 Protection plug 1/2" - 20 UNF M5531-00-09 Protection plug 9/16" - 18 UNF M5531-00-12 Protection plug 3/4" - 16 UNF M5531-00-14 Protection plug 7/8" - 14 UNF M5531-00-17 Protection plug 1 1/16" - 12 UNF M5531-00-19 Protection plug 1 3/16" - 12 UNF M5531-00-21 Protection plug 1 5/16" - 12 UNF M5531-00-26 Protection plug 1 5/8" - 12 UNF M5531-00-30 Protection plug 1 7/8" - 12 UNF M


5490-10NON-RETURN vALvE, bRASS


5490-10-06 Non-return valve G 3/8"F5490-10-08 Non-return valve G 1/2"F5490-10-12 Non-return valve G 3/4"F5490-10-16 Non-return valve G 1"F5490-10-20 Non-return valve G 1 1/4"F5490-10-24 Non-return valve G 1 1/2"F5490-10-32 Non-return valve G 2"F5490-10-40 Non-return valve G 2 1/2"F5490-10-48 Non-return valve G 3"F5490-10-64 Non-return valve G 4"F

Working pressure: 16 Bar Opening pressure: 0.02 Bar

Temperature: +120°C Spring of stainless steel. Seal of nitrile.

5490-20fOOT-vALvE

bRASS WITH STRAINER


5490-20-06 Non-return valve with strainer G 3/8"F5490-20-08 Non-return valve with strainer G 1/2"F5490-20-12 Non-return valve with strainer G 3/4"F5490-20-16 Non-return valve with strainer G 1"F5490-20-20 Non-return valve with strainer G 1 1/4"F5490-20-24 Non-return valve with strainer G 1 1/2"F5490-20-32 Non-return valve with strainer G 2"F

Working pressure: 16 Bar Opening pressure: 0.02 Bar

Temperature: +120°C Spring of stainless steel. Seal of nitrile.



5534-03-08 Protective cover SAE Flange 3000 PSI 1/2"5534-03-12 Protective cover SAE Flange 3000 PSI 3/4"5534-03-16 Protective cover SAE Flange 3000 PSI 1"5534-03-20 Protective cover SAE Flange 3000 PSI 1 1/4"5534-03-24 Protective cover SAE Flange 3000 PSI 1 1/2"5534-03-32 Protective cover SAE Flange 3000 PSI 2"5534-06-08 Protective cover SAE Flange 6000 PSI 1/2"5534-06-12 Protective cover SAE Flange 6000 PSI 3/4"5534-06-16 Protective cover SAE Flange 6000 PSI 1"5534-06-20 Protective cover SAE Flange 6000 PSI 1 1/4"5534-06-24 Protective cover SAE Flange 6000 PSI 1 1/2"5534-06-32 Protective cover SAE Flange 6000 PSI 2"


5534-03/06PROTECTION CAP – SAE fLANGE

Red

5660-30THREAD SEAL TREAD LOCk

fLANGE SEAL ETC

Thread seal (1)5660-30-10 Thread seal Gas, oil, VVS 75 ml.5660-30-11 Thread seal Gas, oil, VVS 250 ml.5660-30-18 Thread seal Hydraulic/pneumatic 50 ml.5660-30-20 Thread seal PTFE 100 ml.Thread lock (2)5660-30-12 Thread lock Light 50 ml.5660-30-13 Thread locks paste 50 g.5660-30-16 Thread lock Medium 50 ml.5660-30-19 Thread lock Solid, high temp +230°C 50 ml.Flange seal (3)5660-30-61 Flange seal 75 ml.Others5660-30-27 Belt spray 400ml.5660-30-35 Allround spray 400 ml.5660-30-36 Cutting oil spray 400 ml.5660-30-37 Chain lubricating spray 300 ml.5660-30-38 Universal cleaning spray 500 ml.5660-30-82 Leak seeker 400 ml.

Part no. Description Type pcs/pack

(1)

(2)(3)

5650-00-01 Thread tape 1/2" 12m

Part no. Description Width Length

5650THREAD TAPE

5532-03PROTECTION PLUG – kS

Red

5532-03-15 Protection plug KS 1/4"5532-03-25 Protection plug KS 3/8"5532-03-35 Protection plug KS 1/2"5532-03-40 Protection plug KS 3/4"5532-03-50 Protection plug KS 1"5532-03-60 Protection plug KS 1 1/4"5532-03-70 Protection plug KS 1 1/2"


5533-00PROTECTION PLUG – G m

Yellow

5533-00-02 Protection plug G 1/8" M5533-00-04 Protection plug G 1/4" M5533-00-06 Protection plug G 3/8" M5533-00-08 Protection plug G 1/2" M5533-00-10 Protection plug G 5/8" M5533-00-12 Protection plug G 3/4" M5533-00-14 Protection plug G 7/8" M5533-00-16 Protection plug G 1" M5533-00-20 Protection plug G 1 1/4" M5533-00-24 Protection plug G 1 1/2" M5533-00-32 Protection plug G 2" M


5533-01PROTECTION CAP – G f

Yellow

5533-01-02 Cover guard G 1/8" F5533-01-04 Cover guard G 1/4" F5533-01-06 Cover guard G 3/8" F5533-01-08 Cover guard G 1/2" F5533-01-10 Cover guard G 5/8" F5533-01-12 Cover guard G 3/4" F5533-01-14 Cover guard G 7/8" F5533-01-16 Cover guard G 1" F5533-01-20 Cover guard G 1 1/4" F5533-01-24 Cover guard G 1 1/2" F5533-01-32 Cover guard G 2" F




5:05

5902-00-11 Grease hose 300 mm K 1/8" M5902-00-12 Grease hose 450 mm K 1/8" M5902-00-14 Grease hose 700 mm K 1/8" M

Part no. Description Length Thread

5902GREASE

EQUIPmENT

825xOIL

8250-32-20 Hydraulic oil ISO VG 32 20L8250-32-04 Hydraulic oil ISO VG 32 4L8250-46-20 Hydraulic oil ISO VG 46 20L8250-46-04 Hydraulic oil ISO VG 46 4L8251-00-20 Hydraulic oil Bio+ 32-68 20L8251-10-20 Motor oil SAE 10W30 20L8251-15-20 Motor oil SAE 15W40 20L5650-00-05 Assembling oil for stainless steel

Part no. Description Quantity

54xxHOSE REELS

Part no. Media Hose dim. Hose length

Work. pressure 60 bar5400-60-06 Air, oil,water 40°C 3/8" 15 m5400-60-08 Air, oil,water 40°C 1/2" 10 m5401-60-08* Air, oil,water 40°C 1/2" 10 m5402-60-06 Air, oil,water 40°C 3/8" 20 m5402-60-08 Air, oil,water 40°C 1/2" 15 m5403-60-08* Air, oil,water 40°C 1/2" 15 m5405-61-16 Water 150°C 5/8" - 1" 15 - 25 m5403-62-16 Air, oil,water 40°C 5/8" - 1" 15 - 25 m

Work. pressure 400 bar5400-40-04 Grease 1/4" 15 m5400-40-06 Water 150°C 3/8" 15 m5401-40-06* Water 150°C 3/8" 15 m5402-40-04 Grease 1/4" 20 m5402-40-06 Water 150°C 3/8" 20 m5403-40-06* Water 150°C 3/8" 20 m5405-41-08 Water 150°C 3/8" - 1/2" 25 m

Air reel 20 bar5404-00-01 Air 1/4" 10 m

Welding hose 20 bar (twin hose)5407-20-05 Oxygen – Acetylen 8 x 14 mm 20 m5407-20-06 Oxygen – Acetylen 10 x 17 mm 15 m

Manual Reel for water hose5408-00-00 Water 1/2" - 3/4" 25 - 50 m

*Stainless design

5400-00-00 5404-00-01

8A14512 Grease couplers G 1/4"F8A509F Straight grease nipple G 1/8"M8A535F 90° grease nipple G 1/8"M8A519F 45° grease nipple G 1/8"M8A504 Straight grease nipple M 6 x 1.0 M8A576 90° grease nipple M 6 x 1.0 M8ANA7206 45° grease nipple M 6 x 1.0 M8A505 Straight grease nipple M 8 x 1.0 M8A505B 45° grease nipple M 8 x 1.0 M8A584 45° grease nipple M 10 x 1.0 M8A577 90° grease nipple M 8 x 1.0 M8A580 Straight grease nipple M 10 x 1.0 M8A583 90° grease nipple M 10 x 1.0 M


8258-00-04 Premium Hi-Temp Cartridge 0.4 Kg8258-00-16 Premium Hi-Temp Bucket 16.0 Kg8258-00-54 Premium Hi-Temp Barrel 54.5 Kg8258-01-81 Premium Hi-Temp Barrel 181.0 Kg

Part no. Description Packaging Quantity

8258PREmIUm HI-TEmP LUbRICANT

Temperature rage: -30° – +170°C, temporarily +290°C Timken Load > lbs 80+

NGLI Nr. EP2

5902-90-01 Assortment box Grease nipples 4 couplers / 135 nipples



5601RUbbER STEEL bONDED

WASHER

Part no. Description For thread

5601-01-02 Rubber steel bonded washer NBR G 1/8" 5601-01-04 Rubber steel bonded washer NBR G 1/4"5601-01-06 Rubber steel bonded washer NBR G 3/8"5601-01-08 Rubber steel bonded washer NBR G 1/2"5601-01-10 Rubber steel bonded washer NBR G 5/8"5601-01-12 Rubber steel bonded washer NBR G 3/4"5601-01-16 Rubber steel bonded washer NBR G 1"5601-01-20 Rubber steel bonded washer NBR G 1 1/4"5601-01-24 Rubber steel bonded washer NBR G 1 1/2"5601-01-32 Rubber steel bonded washer NBR G 2"5601-01-40 Rubber steel bonded washer NBR G 2 1/2"

5601-02-05 Rubber steel bonded washer NBR M 55601-02-06 Rubber steel bonded washer NBR M 65601-02-08 Rubber steel bonded washer NBR M 85601-02-10 Rubber steel bonded washer NBR M 105601-02-12 Rubber steel bonded washer NBR M 125601-02-14 Rubber steel bonded washer NBR M 145601-02-16 Rubber steel bonded washer NBR M 165601-02-18 Rubber steel bonded washer NBR M 185601-02-20 Rubber steel bonded washer NBR M 205601-02-22 Rubber steel bonded washer NBR M 225601-02-27 Rubber steel bonded washer NBR M 275601-02-28 Rubber steel bonded washer NBR M 285601-02-36 Rubber steel bonded washer NBR M 365601-02-45 Rubber steel bonded washer NBR M 45

5601-01-02V Rubber steel bonded washer viton G 1/8" 5601-01-04V Rubber steel bonded washer viton G 1/4"5601-01-06V Rubber steel bonded washer viton G 3/8"5601-01-08V Rubber steel bonded washer viton G 1/2"5601-01-10V Rubber steel bonded washer viton G 5/8"5601-01-12V Rubber steel bonded washer viton G 3/4"5601-01-16V Rubber steel bonded washer viton G 1"5601-01-20V Rubber steel bonded washer viton G 1 1/4"5601-01-24V Rubber steel bonded washer viton G 1 1/2"5601-01-32V Rubber steel bonded washer viton G 2"5601-01-40V Rubber steel bonded washer viton G 2 1/2"

5601-02-05V Rubber steel bonded washer viton M 55601-02-06V Rubber steel bonded washer viton M 65601-02-08V Rubber steel bonded washer viton M 85601-02-10V Rubber steel bonded washer viton M 105601-02-12V Rubber steel bonded washer viton M 125601-02-14V Rubber steel bonded washer viton M 145601-02-16V Rubber steel bonded washer viton M 165601-02-18V Rubber steel bonded washer viton M 185601-02-20V Rubber steel bonded washer viton M 205601-02-22V Rubber steel bonded washer viton M 225601-02-27V Rubber steel bonded washer viton M 275601-02-28V Rubber steel bonded washer viton M 285601-02-36V Rubber steel bonded washer viton M 365601-02-45V Rubber steel bonded washer viton M 45

5601-00-02 Assortment box 1/8" – 1 1/2"5601-00-03 Assortment box 6 – 22 mm5601-00-04 Assortment box 1/8" – 1 1/4" 6 – 18mm

5601-00-02 Rubber steel bonded washer inch 118 pcs5601-00-03 Rubber steel bonded washer mm 130 pcs5601-00-04 Rubber steel bonded washer inch/mm 225 pcs5620-00-01 Copper plate mm 225 pcs5902-90-01 Grease nipples 139 pcs5611-00-01 O-rings 70 shore inch 328 pcs5611-00-02 O-rings 70 shore mm 460 pcs5611-00-03 ORFS O-rings (and tool) 145 pcs

Part no. Description Type Quantity

5995ENvIROmENTAL OIL PLUG

Part no. Thread connection Threaded block

Oil plug5995-14-15 M 22 M14 x 1.5 M5995-16-15 M 22 M16 x 1.5 M5995-18-15 M 22 M18 x 1.5 M5995-18-16 M 26 M18 x 1.5 M5995-20-16 M 26 M20 x 1.5 M5995-22-15 M 26 M22 x 1.5 M5995-24-15M M 26 M24 x 1.5 M5995-24-20M M 26 M24 x 2.0 M5995-01-12 M 26 3/4"-16 UNF M5995-01-14 M 26 7/8"-14 UNF M5995-00-06 M 22 G 3/8" M5995-00-08 M 26 G 1/2" M5995-00-12M M 26 G 3/4" M

Part no. Thread connection Hose length

Drainage hose5996-00-22 M 22 250 mm5996-05-22 M 22 500 mm5996-02-26 M 26 250 mm5996-05-26 M 26 500 mm5996-01-26 M 26 1000 mm5996-42-22 M 22 45° 250 mm5996-92-22 M 22 90° 250 mm5996-42-26 M 26 45° 250 mm

5601-00ASSORTmENT bOxS



5:05

5620COPPER PLATE

Part no. Description ID YD Thickness

5620-05-09 KBR 5.0 mm 9.0 mm 1.0 mm5620-06-10 KBR 6.0 mm 10.0 mm 1.0 mm5620-06-12 KBR 6.0 mm 12.0 mm 1.0 mm5620-08-12 KBR 8.0 mm 12.0 mm 1.0 mm5620-08-14 KBR 8.0 mm 14.0 mm 1.0 mm







5620-38-44 KBR 38.0 mm 44.0 mm 2.0 mm5620-60-68 KBR 60.0 mm 68.0 mm 2.5 mm

5620-00-01 Assortment box. mm 10–26 mm

5610O-RINGS

Part no. Description For

5610-01-07 O-ring 7/16" UNF5610-01-08 O-ring 1/2" UNF5610-01-09 O-ring 9/16" UNF5610-01-12 O-ring 3/4" UNF5610-01-14 O-ring 7/8" UNF5610-01-17 O-ring 1 1/16" UNF5610-01-19 O-ring 1 3/16" UNF5610-01-21 O-ring 1 5/16" UNF5610-01-26 O-ring 1 5/8" UNF5610-01-30 O-ring 1 7/8" UNF

5610-02-08 O-ring 1/2" Flange5610-02-12 O-ring 3/4" Flange5610-02-16 O-ring 1" Flange5610-02-20 O-ring 1 1/4" Flange5610-02-24 O-ring 1 1/2" Flange5610-02-32 O-ring 2" Flange5610-02-40 O-ring 2 1/2" Flange

5610-03-06 O-ring DKL(S)O 65610-03-08 O-ring DKL(S)O 85610-03-10 O-ring DKL(S)O 105610-03-12 O-ring DKL(S)O 12

5610-03-15 O-ring DKLO 155610-03-18 O-ring DKLO 185610-03-22 O-ring DKLO 225610-03-28 O-ring DKLO 285610-03-35 O-ring DKLO 355610-03-42 O-ring DKLO 425610-04-14 O-ring DKSO 145610-04-16 O-ring DKSO 165610-04-20 O-ring DKSO 205610-04-25 O-ring DKSO 255610-04-30 O-ring DKSO 305610-04-38 O-ring DKSO 38

5610-05-14 O-ring 3173-14-xx

5610-06-04 O-ring G 1/4" IR O5610-06-06 O-ring G 3/8" IR O5610-06-08 O-ring G 1/2" IR O5610-06-10 O-ring G 5/8" IR O5610-06-12 O-ring G 3/4" IR O5610-06-16 O-ring G 1" IR O5610-06-20 O-ring G 1 1/4" IR O5610-06-24 O-ring G 1 1/2" IR O5610-06-32 O-ring G 2" IR O

5610-07-04 O-ring 9/16" ORFS5610-07-06 O-ring 11/16" ORFS5610-07-08 O-ring 13/16" ORFS5610-07-10 O-ring 1" ORFS5610-07-12 O-ring 1 3/16" ORFS5610-07-16 O-ring 1 7/16" ORFS5610-07-20 O-ring 1 11/16" ORFS5610-07-24 O-ring 2" ORFS

5611-00-01 Assortment box, tum 382 pcs5611-00-01 Assortment box, mm 460 pcs5611-00-03 ORFS O-rings (and tool) 145 pcs


5:10

HYDROSCAND FLANGES

FLANGES

PRODUCT GROUP 510

The Hydroscand flange program includes everything from split flanges to threaded and welding ones.

Flanges are used in hydraulic systems that require high pressure and high pulsation.

The flanges are manufactured according to SAE J518 code 61 and 62. Code 61 signifies the pressure ratings mentioned below, also called 3000 psi. Code 62 signi-fies the pressure rate 41.4 MPa, also called 6000 psi.

Many of the flanges are also available in stainless steel design.


FLANGES PAGE

TAbLE OF CONTENTS

TECHNiCAL iNFORmATiON ACCORDiNG TO SAE J518 CODE 61

Flange 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3"

WP MPa 34.5 34.5 34.5 27.6 20.7 20.7 17.2 13.8

PSI 5000 5000 5000 4000 3000 3000 2500 2000

TECHNiCAL iNFORmATiON ACCORDiNG TO SAE J518 CODE 62

Flange 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3"

WP MPa 41.4 41.4 41.4 41.4 41.4 41.4 41.4 41.4

PSI 6000 6000 6000 6000 6000 6000 6500 6000

5540-00 Split flange 1925540-02 Split flange 1925540-01 Flat split flange 1925540-03 Flat split flange 1925549-00 One-piece flange 1925549-02 One-piece flange 1925549-01 One-piece flange 1925549-03 One-piece flange 1925574 Welding nipple male 1935575 Welding nipple male 1935541-01 Threaded flange 1935541-02 Threaded flange 1935541-06 Counter flange, flat 1935541-07 Counter flange, threaded 1935543-00 Welding flange 1935543-02 Welding flange 1945543-06 Counter flange, welding 1945543-07 Counter flange, welding 1945544-00 Welding flange, male 1945544-02 Welding flange, male 1945544-06 Welding Counter flange, male 1945544-08 Welding Counter flange, male 1945545-00 Flange plug 1945545-01 Flange plug 1955545-02 Flange plug 1955545-03 Flange plug 1955545-04 Middle flange with socket 1955545-06 Middle flange with socket 1955546-00 Welding flange, female 90° 1955546-02 Welding flange, female 90° 1955547-00 Welding flange, male 90° 1955547-02 Welding flange, male 90° 1965548-00 Flange threaded, 90° 1965548-02 Flange threaded, 90° 1965549-91 Socket head cap screw M 6S 12.9 M-thread 1965549-92 Socket head cap screw M 6S 12.9 UNC-thread 196

HYDROSCAND FLANGES PRODUCT GROUP 510


5540-00SPLiT FLANGE

SAE J518 Code 61

5549-00ONE-PiECE FLANGE

SAE J518 Code 61

5540-02SPLiT FLANGE

SAE J518 Code 62

5540-01FLAT SPLiT FLANGE

SAE J518 Code 61

5540-03FLAT SPLiT FLANGE

SAE J518 Code 62

Part number Description Dimension Part number Description Dimension

Part number Description Dimension



5540-00-08 Split flange SAE3 1/2"5540-00-12 Split flange SAE3 3/4"5540-00-16 Split flange SAE3 1"5540-00-20 Split flange SAE3 1 1/4"5540-00-24 Split flange SAE3 1 1/2"5540-00-32 Split flange SAE3 2"5540-00-40 Split flange SAE3 2 1/2"5540-00-48 Split flange SAE3 3"

5549-00-08 AFS/I -301 SAE3 1/2"5549-00-12 AFS/I -302 SAE3 3/4"5549-00-16 AFS/I -303 SAE3 1"5549-00-20 AFS/I -304 SAE3 1 1/4"5549-00-24 AFS/I -305 SAE3 1 1/2"5549-00-32 AFS/I -306 SAE3 2"5549-00-40 AFS/I -307 SAE3 2 1/2"5549-00-48 AFS/I -308 SAE3 3"

5540-02-08 Split flange SAE6 1/2"5540-02-12 Split flange SAE6 3/4"5540-02-16 Split flange SAE6 1"5540-02-20 Split flange SAE6 1 1/4"5540-02-24 Split flange SAE6 1 1/2"5540-02-32 Split flange SAE6 2"

5540-01-08 Flat split flange SAE3 1/2"5540-01-12 Flat split flange SAE3 3/4"5540-01-16 Flat split flange SAE3 1"5540-01-20 Flat split flange SAE3 1 1/4"5540-01-24 Flat split flange SAE3 1 1/2"5540-01-32 Flat split flange SAE3 2"

5540-03-08 Flat split flange SAE6 1/2"5540-03-12 Flat split flange SAE6 3/4"5540-03-16 Flat split flange SAE6 1"5540-03-20 Flat split flange SAE6 1 1/4"5540-03-24 Flat split flange SAE6 1 1/2"


SAE J518 Code 62


5549-02-08 AFS/I -601 SAE6 1/2"5549-02-12 AFS/I -602 SAE6 3/4"5549-02-16 AFS/I -603 SAE6 1"5549-02-20 AFS/I -604 SAE6 1 1/4"5549-02-24 AFS/I -605 SAE6 1 1/2"5549-02-32 AFS/I -606 SAE6 2"


Threaded fixing holes SAE J518 Code 61

Part number Description Hole Dimension

5549-01-08 AFS/I -301 SAE3 M8 1/2"5549-01-12 AFS/I -302 SAE3 M10 3/4"5549-01-16 AFS/I -303 SAE3 M10 1"5549-01-20 AFS/I -304 SAE3 M10 1 1/4"5549-01-24 AFS/I -305 SAE3 M12 1 1/2"5549-01-32 AFS/I -306 SAE3 M12 2"5549-01-40 AFS/I -307 SAE3 M12 2 1/2"5549-01-48 AFS/I -308 SAE3 M16 3"


Threaded fixing holes SAE J518 Code 62

Part number Description Hole Dimension

5549-03-08 AFS/I -601 SAE6 M8 1/2"5549-03-12 AFS/I -602 SAE6 M10 3/4"5549-03-16 AFS/I -603 SAE6 M12 1"5549-03-20 AFS/I -604 SAE6 M14 1 1/4"5549-03-24 AFS/I -605 SAE6 M16 1 1/2"5549-03-32 AFS/I -606 SAE6 M20 2"

PRODUCT GROUP 510 HYDROSCAND FLANGES


5:10

5574WELDiNG NiPPLE

mALE

SAE J518 Code 61

5575WELDiNG NiPPLE

mALE

SAE J518 Code 62

Part number Description Dimension Ø OD Ø ID


5574-00-08 SFS 301/ST SAE3 1/2" 16 mm 2 mm5574-00-12 SFS 302/ST SAE3 3/4" 25 mm 3 mm5574-00-16 SFS 303/ST SAE3 1" 30 mm 4 mm5574-00-20 SFS 304/ST SAE3 1 1/4" 38 mm 5 mm5574-00-24 SFS 305/ST SAE3 1 1/2" 45 mm 5 mm5574-00-32 SFS 306/ST SAE3 2" 60 mm 5 mm5574-00-40 SFS 307/ST SAE3 2 1/2" 70 mm 7. 5 mm5574-00-48 SFS 308/ST SAE3 3" 80 mm 6 mm5574-00-56 SFS 309/ST SAE3 3 1/2" 100 mm 5. 5 mm5574-00-64 SFS 310/ST SAE3 4" 114.4 mm 6.5 mm

5575-00-08 SFS 601/ST SAE6 1/2" 16 mm 12 mm5575-00-12 SFS 602/ST SAE6 3/4" 25 mm 18 mm5575-00-16 SFS 603/ST SAE6 1" 30 mm 22 mm5575-00-20 SFS 604/ST SAE6 1 1/4" 38 mm 27 mm5575-00-24 SFS 605/ST SAE6 1 1/2" 45 mm 32 mm5575-00-32 SFS 606/ST SAE6 2" 60 mm 45 mm

5541-01THREADED FLANGE

SAE J518 Code 61

5541-02THREADED FLANGE

SAE J518 Code 62

5541-06COUNTER FLANGE, FLAT

SAE J518 Code 61

5541-07COUNTER FLANGE,

THREADED

SAE J518 Code 62

5543-00WELDiNG FLANGE

SAE J518 Code 61






5541-00-08 AFS-080/G SAE3 G 1/2"5541-00-12 AFS-100/G SAE3 G 3/4"5541-00-16 AFS-102/G SAE3 G 1"5541-00-20 AFS-104/G SAE3 G 1 1/4"5541-00-24 AFS-106/G SAE3 G 1 1/2"5541-00-32 AFS-108/G SAE3 G 2"5541-00-40 AFS-110/G SAE3 G 2 1/2"5541-00-48 AFS-112/G SAE3 G 3"5541-00-56 AFS-114/G SAE3 G 3 1/2"5541-00-64 AFS-116/G SAE3 G 4"

5541-02-06 AFS-401/G SAE6 G 3/8"5541-02-08 AFS-401/G SAE6 G 1/2"5541-02-12 AFS-402/G SAE6 G 3/4"5541-02-16 AFS-403/G SAE6 G 1"5541-02-20 AFS-404/G SAE6 G 1 1/4"5541-02-24 AFS-405/G SAE6 G 1 1/2"5541-02-32 AFS-406/G SAE6 G 2"

5541-06-08 GFS -080/GM 8 SAE3 G 1/2"5541-06-12 GFS -100/GM 10 SAE3 G 3/4"5541-06-16 GFS -102/GM 10 SAE3 G 1"5541-06-20 GFS -104/GM 10 SAE3 G 1 1/4"5541-06-24 GFS -106/GM 12 SAE3 G 1 1/2"5541-06-32 GFS -108/GM 12 SAE3 G 2"5541-06-40 GFS -110/GM 12 SAE3 G 2 1/2"5541-06-48 GFS -112/GM 16 SAE3 G 3"

5541-07-08 GFS-401/GM 10 SAE6 G 1/2"5541-07-12 GFS-402/GM 10 SAE6 G 3/4"5541-07-16 GFS-403/GM 12 SAE6 G 1"5541-07-20 GFS-404/GM 14 SAE6 G 1 1/4"5541-07-24 GFS-405/GM 16 SAE6 G 1 1/2"5541-07-32 GFS-406/GM 20 SAE6 G 2"

5543-00-08 AFS-080/S SAE3 1/2" 21.6 mm 13 mm5543-00-12 AFS-100/S SAE3 3/4" 27.2 mm 19 mm5543-00-16 AFS-102/S SAE3 1" 34.0 mm 25 mm5543-00-20 AFS-104/S SAE3 1 1/4" 42.8 mm 32 mm5543-00-24 AFS-106/S SAE3 1 1/2" 48.6 mm 38 mm5543-00-32 AFS-108/S SAE3 2" 61.0 mm 51 mm5543-00-40 AFS-110/S SAE3 2 1/2" 76.6 mm 63 mm5543-00-48 AFS-112/S SAE3 3" 90.5 mm 73 mm5543-00-56 AFS-114/S SAE3 3 1/2" 103,0 mm 89 mm



5543-02WELDiNG FLANGE

SAE J518 Code 62


WELDiNG

SAE J518 Code 61


WELDiNG

SAE J518 Code 62

5544-00WELDiNG FLANGE, mALE

SAE J518 Code 61

5544-02WELDiNG FLANGE, mALE

SAE J518 Code 62





5543-02-06 AFS-401/S SAE6 3/8" 17.5 mm 10 mm5543-02-08 AFS-401/S SAE6 1/2" 21.6 mm 13 mm5543-02-12 AFS-402/S SAE6 3/4" 27.2 mm 19 mm5543-02-16 AFS-403/S SAE6 1" 34.0 mm 25 mm5543-02-20 AFS-404/S SAE6 1 1/4" 42.8 mm 32 mm5543-02-24 AFS-405/S SAE6 1 1/2" 48.6 mm 38 mm5543-02-32 AFS-406/S SAE6 2" 61.0 mm 51 mm5543-02-40 AFS-407/S SAE6 2 1/2" 76.6 mm 63 mm


5543-06-08 GFS-080/S SAE3 1/2" 21.6 mm 13 mm5543-06-12 GFS-100/S SAE3 3/4" 27.2 mm 19 mm5543-06-16 GFS-102/S SAE3 1" 34.0 mm 25 mm5543-06-20 GFS-104/S SAE3 1 1/4" 42.8 mm 32 mm5543-06-24 GFS-106/S SAE3 1 1/2" 48.6 mm 38 mm5543-06-32 GFS-108/S SAE3 2" 61.0 mm 51 mm5543-06-40 GFS-110/S SAE3 2 1/2" 76.6 mm 63 mm5543-06-48 GFS-112/S SAE3 3" 90.5 mm 73 mm

5543-07-08 GFS-401/S SAE6 1/2" 21.6 mm 13 mm5543-07-12 GFS-402/S SAE6 3/4" 27.2 mm 19 mm5543-07-16 GFS-403/S SAE6 1" 34.0 mm 25 mm5543-07-20 GFS-404/S SAE6 1 1/4" 42.8 mm 32 mm5543-07-24 GFS-405/S SAE6 1 1/2" 48.6 mm 38 mm5543-07-32 GFS-406/S SAE6 2" 61.0 mm 51 mm

5544-00-08 AFS-080/ST SAE3 1/2" 21.5 mm 13.0 mm5544-00-12 AFS-100/ST SAE3 3/4" 28.0 mm 19.0 mm5544-00-16 AFS-102/ST SAE3 1" 34.0 mm 25.0 mm5544-00-20 AFS-104/ST SAE3 1 1/4" 42.8 mm 32.0 mm5544-00-24 AFS-106/ST SAE3 1 1/2" 48.6 mm 38.0 mm5544-00-32 AFS-108/ST SAE3 2" 61.0 mm 51.0 mm5544-00-40 AFS-110/ST SAE3 2 1/2" 77.0 mm 63.0 mm5544-00-48 AFS-112/ST SAE3 3" 92.0 mm 73.0 mm5544-00-64 AFS-116/ST SAE3 4" 115.5 mm 99.0 mm

5544-02-08 AFS-401/ST SAE6 1/2" 21.5 mm 13.0 mm5544-02-12 AFS-402/ST SAE6 3/4" 28.0 mm 19.0 mm5544-02-16 AFS-403/ST SAE6 1" 34.0 mm 25.0 mm5544-02-20 AFS-404/ST SAE6 1 1/4" 42.8 mm 32.0 mm5544-02-24 AFS-405/ST SAE6 1 1/2" 48.6 mm 38.0 mm5544-02-32 AFS-406/ST SAE6 2" 61.0 mm 51.0 mm

5544-06WELDiNG COUNTER

FLANGE, mALE

SAE J518 Code 61

5544-08WELDiNG COUNTER

FLANGE, mALE

SAE J518 Code 62



5544-06-08 GFS-080/ST SAE3 1/2" 21.5 mm 13.0 mm5544-06-12 GFS-100/ST SAE3 3/4" 28.0 mm 19.0 mm5544-06-16 GFS-102/ST SAE3 1" 34.0 mm 25.0 mm5544-06-20 GFS-104/ST SAE3 1 1/4" 42.8 mm 32.0 mm5544-06-24 GFS-106/ST SAE3 1 1/2" 48.6 mm 38.0 mm5544-06-32 GFS-108/ST SAE3 2" 61.0 mm 51.0 mm5544-06-40 GFS-110/ST SAE3 2 1/2" 77.0 mm 63.0 mm5544-06-48 GFS-112/ST SAE3 3" 92.0 mm 73.0 mm5544-06-64 GFS-116/ST SAE3 4" 115.5 mm 99.0 mm

5544-08-08 GFS-401/STSAE6 1/2" 21.5 mm 13.0 mm5544-08-12 GFS-402/ST SAE6 3/4" 28.0 mm 19.0 mm5544-08-16 GFS-403/ST SAE6 1" 34.0 mm 25.0 mm5544-08-20 GFS-404/ST SAE6 1 1/4" 42.8 mm 32.0 mm5544-08-24 GFS-405/ST SAE6 1 1/2" 48.6 mm 38.0 mm5544-08-32 GFS-406/ST SAE6 2" 61.0 mm 51.0 mm

5545-00FLANGE PLUG

SAE J518 Code 61


5545-00-08 AFC-080 SAE3 Plug 1/2"5545-00-12 AFC-100 SAE3 Plug 3/4"5545-00-16 AFC-102 SAE3 Plug 1"5545-00-20 AFC-104 SAE3 Plug 1 1/4"5545-00-24 AFC-106 SAE3 Plug 1 1/2"5545-00-32 AFC-108 SAE3 Plug 2"5545-00-40 AFC-110 SAE3 Plug 2 1/2"5545-00-48 AFC-112 SAE3 Plug 3"

PRODUCT GROUP 510 HYDROSCAND FLANGES


5:10

5545-01FLANGE PLUG

SAE J518 Code 61

5545-02FLANGE PLUG

SAE J518 Code 62

5545-03FLANGE PLUG

SAE J518 Code 62

5545-04miDDLE FLANGE

WiTH SOCkET

SAE J518 Code 61

5545-06miDDLE FLANGE

WiTH SOCkET

SAE J518 Code 62




Part number Description Thread Dimension

Part number Description Thread Dimension

5545-01-12 Blind plug SAE3 3/4"5545-01-16 Blind plug SAE3 1"5545-01-20 Blind plug SAE3 1 1/4"5545-01-24 Blind plug SAE3 1 1/2"5545-01-32 Blind plug SAE3 2"

5545-02-08 Blind plug SAE6 1/2"5545-02-12 Blind plug SAE6 3/4"5545-02-16 Blind plug SAE6 1"5545-02-20 Blind plug SAE6 1 1/4"5545-02-24 Blind plug SAE6 1 1/2"5545-02-32 Blind plug SAE6 2"

5545-03-12 AFC-100 SAE6 Plug 3/4"5545-03-16 AFC-102 SAE6 Plug 1"5545-03-20 AFC-104 SAE6 Plug 1 1/4"5545-03-24 AFC-106 SAE6 Plug 1 1/2"5545-03-32 AFC-108 SAE6 Plug 2"

5545-04-16 D102 SAE3 G 1/8" 1"5545-04-20 D104 SAE3 G 1/8" 1 1/4"5545-04-24 D106 SAE3 G 1/8" 1 1/2"5545-04-32 D108 SAE3 G 1/8" 2"

5545-06-12 D402 SAE6 G 1/8" 3/4"5545-06-16 D403 SAE6 G 1/8" 1"5545-06-20 D404 SAE6 G 1/8" 1 1/4"5545-06-24 D405 SAE6 G 1/8" 1 1/2"5545-06-32 D406 SAE6 G 1/4" 2"

Thread G 1/8"

Thread G 1/8"

5546-00WELDiNG FLANGE,

FEmALE 90°

SAE J518 Code 61


FEmALE 90°

SAE J518 Code 62



5546-00-12 AFS-200/90S SAE3 3/4" 27.2 mm 19.0 mm5546-00-16 AFS-202/90S SAE3 1" 34.0 mm 25.0 mm5546-00-20 AFS-204/90S SAE3 1 1/4" 42.8 mm 32.0 mm5546-00-24 AFS-206/90S SAE3 1 1/2" 48.6 mm 38.0 mm5546-00-32 AFS-208/90S SAE3 2" 61.0 mm 51.0 mm

5546-02-12 AFS-700/90S SAE6 3/4" 27.2 mm 19.0 mm5546-02-16 AFS-702/90S SAE6 1" 34.0 mm 25.0 mm5546-02-20 AFS-704/90S SAE6 1 1/4" 42.8 mm 32.0 mm5546-02-24 AFS-706/90S SAE6 1 1/2" 48.6 mm 38.0 mm5546-02-32 AFS-708/90S SAE6 2" 61.0 mm 51.0 mm


mALE 90°

SAE J518 Code 61


5547-00-12 AFS-200/90ST SAE3 3/4" 27.0 mm 19.0 mm5547-00-16 AFS-202/90ST SAE3 1" 34.5 mm 23.0 mm5547-00-20 AFS-204/90ST SAE3 1 1/4" 43.0 mm 31.0 mm5547-00-24 AFS-206/90ST SAE3 1 1/2" 50.0 mm 35.0 mm5547-00-32 AFS-208/90ST SAE3 2" 65.0 mm 48.0 mm




mALE 90°

SAE J518 Code 62


5547-02-12 AFS-700/90ST SAE6 3/4" 28.0 mm 19.0 mm5547-02-16 AFS-702/90ST SAE6 1" 34.0 mm 25.0 mm5547-02-20 AFS-704/90ST SAE6 1 1/4" 42.0 mm 32.0 mm5547-02-24 AFS-706/90ST SAE6 1 1/2" 48.0 mm 38.0 mm

5548-00FLANGE THREADED,

90°

SAE J518 Code 61

5548-02FLANGE THREADED,

90°

SAE J518 Code 62

5549-91SOCkET HEAD CAP SCREW

m 6S 12.9 m-THREAD

5549-92SOCkET HEAD CAP SCREW m 6S 12.9 UNC-THREADPart number Description Thread


Part number Thread Length SAE3 SEA6

Part number Thread Length SAE3 SEA6

5548-00-12 AFS-200/90G SAE3 G 3/4"5548-00-16 AFS-202/90G SAE3 G 1"5548-00-20 AFS-204/90G SAE3 G 1 1/4"5548-00-24 AFS-206/90G SAE3 G 1 1/2"5548-00-32 AFS-208/90G SAE3 G 2"

5548-02-12 AFS-700/90G SAE6 G 3/4"5548-02-16 AFS-702/90G SAE6 G 1"5548-02-20 AFS-704/90G SAE6 G 1 1/4"5548-02-24 AFS-706/90G SAE6 G 1 1/2"

5549-91-08 M8 35 mm 1/2" 1/2"5549-91-10 M10 35 mm 3/4"–1" 3/4"5549-91-11 M10 40 mm 1 1/4"5549-91-12 M10 45 mm5549-91-13 M12 45 mm 1 1/2"–2 1/2" 1"5549-91-14 M14 50 mm 1 1/4"5549-91-16 M16 50 mm 3"–4" 1 1/2"

5549-92-06 3/8"-16 UNC 38 mm 3/4"–1" 3/4"5549-92-07 7/16"-14 UNC 45 mm 1 1/4" 1"5549-92-08 1/2"-13 UNC 45 mm 1 1/2"–2 1/2" 1 1/4"5549-92-10 5/8"-11 UNC 51 mm 3"–4" 1 1/2"


5:20

HYDROSCAND QUiCk RELEASE fiTTiNGS AND SwivELS

QUiCk RELEASE fiTTiNGS AND SwivELS

PRODUCT GROUP 520/523/524

The use of quick release fittings is increasing; the possibility of assembling and disassembling a fitting without any tools is essential in many applications, for example in compressed air hand tools, portable hydraulic plants, cranes, tow and marine applications.

Hydroscand offers many types of quick release fittings, for example environmentally friendly and drip-free fittings, couplings to be connected during pressure, acid resistant fittings for aggressive materials and other fittings with a working pressure up to /PN 100 MPa, bore/NW 3–50 mm, ISO standard and HTMA norms.

Materials:Hydroscand's quick release fittings can be delivered in most designs, normally E-coated, which is the name of our coupling surface treatment. The surface treatment is free from Cr6, and is therefore better for both the environment and personal health. Alternative materials are stainless and acid resistant steel with sealings in Nitrile, Viton, EPDM and Teflon.

Connections:Withworth pipe threads (G) are used throughout, but other types of threads are available on request, for example conical pipe threads (R), NPTF, UNF, UNC or metric threads. The air assortment also include conical pipe threads (R), hose fittings as well as hose sockets.

Standards and certificates:Hydroscand can deliver most fittings according to international standards and with certificates from Det Norske Veritas, Germanischer Lloyd, DVWG and other approvals.

working pressure/PN:The working pressure/PN is indicated next to each fitting with a safety factor of 4 for rupture. The working pressure refers to connected fitting. Please note that the pressure surges/transients can lead to major mechanical stress in the system.

For pressure drop index, see chapter 11.



HYDRAULiCS PAGE

TAbLE Of CONTENTS

5551-04/05 Dust cover, ISO A 1995550-02/03 ISO A 1995550-08 Spare part kit 1995558-34/35 Dust cover, ISO B 1995558-32/33 ISO B 1995558-59 Spare part kit 1995553-02/03 HANSEN HKP ISO B 2005553-04/05 Dust cover, ISO B 2005553-06/07 HANSEN HKP O-ring/T-ring 2005558-02/03 FASTER NV 2005558-14/15 FASTER NV, protection 2005558-16 FASTER NV Spare part kit 2005551-02 FASTER QR/PV Push-pull 2015Cxx CEJN series 525 2015Cxx Dust cover, CEJN series 525 2015Cxx Spare part kit, CEJN series 525 2015Txx TEMA standard, T series 2025Txx TEMA Dust cover 2025Txx TEMA Grease nipple 2025Txx Tema Spare part kit 2025558-22/23 FASTER VV 2035558-38/39 FASTER VV, protection 2035558-24 FASTER VV Spare part kit 2035558-64/65 FASTER PVVM 2035558-66/67 FASTER PVVM, protection 2035558-69 FASTER PVVM Spare part kit 2035TFF TEMA FF 2035TFF TEMA FF, nipple with eleminator 2045TFF TEMA Dust cover 2045TFF TEMA Spare part kit 2045CX65 CEJN 2045CX65 CEJN Dust cover 2045TIF TEMA IF 2055TIF/5TFF TEMA, Grease nipple 2055TIF TEMA Dust cover 2055TIF TEMA Spare part kit 2055558-18/19 FASTER 2FFN 2065558-40/41 FASTER 2FFN, protection 2065558-20 FASTER 2FFN Spare part kit 2065559-12/13 Bruning NS-series 2065559-14 Bruning, protection 2065558-48/49 FASTER 3 FFV 2075558-58 FASTER 3FFV, protection 2075558-44 FASTER 3FFV Spare part kit 2075558-80/81 FASTER CVV 2075558-86/87 FASTER CVV, protection 2075Cxx CEJN Standard 2085Cxx CEJN Series 115 208 Stucchi VP 208 Stucchi, protection 2085558-xx MULTIFASTER 209 Multiconnect 2 gates 211 Multiconnect 3 gates 211 Multiconnect Plate, 4 gates 211 Multiconnect 4 gates 211 Multiconnect 6 gates 211 Multiconnect Plate, 6 gates 211 Multiconnect Hydraulic couplings 212 Multiconnect Hydraulic couplings 212 Multiconnect Hydraulic couplings 212 Multiconnect Electrical sockets 212 Multiconnect Electrical sockets 212 Multiconnect Electrical sockets 212 Multiconnect Lock rings 213 Multiconnect Plugs 213 Multiconnect Seal Kit 213 Multiconnect Spare part kit 213

AiR PRESSURE/fLUiDS PAGE TEMA 1100 Compressed air fittings 214 TEMA 1100N Compressed air fittings 214 TEMA 1300/1300E Compressed air fittings 214 TEMA 1600 Compressed air fittings 215 TEMA 1625 Compressed air fittings 215 TEMA 1650 Compressed air fittings 215 TEMA 1700 Compressed air fittings 216 TEMA 1750 Compressed air fittings 216 TEMA 1800/1800E Compressed air fittings 217 TEMA 1800N Compressed air fittings 217 TEMA 1800H High pressure water 217 TEMA 2100N Compressed air fittings 218 TEMA Hose nipple 2185552 Blow gun 2185552 Spiral hose 2185C10 320 Cejn series 320 2185C10 320 Cejn series 320 Safety fitting 2185C10 410 Cejn series 410 2195C10 410 Cejn series 410 Safety fitting 219

SwivELS PAGE

MiSCELLANEOUS vALvES PAGE

5555 Tema swivel joint 2205590 High pressure swivel, M – M 2205591 High pressure swivel, M – F 2205576-01 Swivel, Straight, G-threaded 2205577-01 Swivel, Elbow 90°, G-threaded 220

5TTA TEMA decompression valve 2215558-68 Faster VF Burst valve 2215554 Hose brake valve 2215558-76 Back valve F/F 2215558-77 Back valve M/M 221

PRODUCT GROUP 520/523/524 QUiCk RELEASE fiTTiNGS AND SwivELS


5:20

5550-02/03iSO A

G-thread, female

Dim. Male Female PN MPa Thread Length

1/4" 5550-02-04 5550-03-04 35.0 G 1/4" F 71.0 mm 3/8" 5550-02-06 5550-03-06 31.5 G 3/8" F 79.5 mm 1/2" 5550-02-08 5550-03-08 25.0 G 1/2" F 92.0 mm 3/4" 5550-02-12 5550-03-12 25.0 G 3/4" F 108.0 mm 1" 5550-02-16 5550-03-16 23.0 G 1" F 124.0 mm

PRODUCT GROUP 520Quick release fitting with dimensions and performance equivalent to ISO 7241-1 A series.

Used in agriculture and in industries.

Interchangeable with other fittings manufactured according to ISO7241-1 A series.

PRODUCT GROUP 520

5551-04/05DUST COvER, iSO A

Yellow

Dim. Male Female

1/4" 5551-04-04 5551-05-04 3/8" 5550-04-06 5550-05-06 1/2" 5550-04-08 5550-05-08 3/4" 5551-04-12 5551-05-12 1" 5551-04-16 5551-05-16

PRODUCT GROUP 520

Dust cover, for male

Dust cover, for female

5550-08SPARE PART kiT

Dim. Spare part kit

1/4" 5550-08-04 3/8" 5550-08-06 1/2" 5550-08-08 3/4" 5550-08-12 1" 5550-08-16

PRODUCT GROUP 520

5558-34/35DUST COvER, iSO b

Red

Dim. Male Female

1/4" 5558-34-04 5558-35-04 3/8" 5558-34-06 5558-35-06 1/2" 5558-34-08 5558-35-08 3/4" 5558-34-12 5558-35-12 1" 5558-34-16 5558-35-16

PRODUCT GROUP 520



5558-59SPARE PART kiT

Dim. Spare part kit

1/8" 5558-59-02 1/4" 5558-59-04 3/8" 5558-59-06 1/2" 5558-59-08 3/4" 5558-59-12 1" 5558-59-16

5558-32/33iSO b

G-thread, female


1/8" 5558-32-02 5558-33-02 40.0 G 1/8" F 60.5 mm 1/4" 5558-32-04 5558-33-04 35.0 G 1/4" F 70.5 mm 3/8" 5558-32-06 5558-33-06 30.0 G 3/8" F 82.5 mm 1/2" 5558-32-08 5558-33-08 30.0 G 1/2" F 92.5 mm 3/4" 5558-32-12 5558-33-12 25.0 G 3/4" F 111.0 mm 1" 5558-32-16 5558-33-16 23.0 G 1" F 133.0 mm

PRODUCT GROUP 520Quick release fitting with dimensions and performance equivalent to ISO 7241-1 B series.

Suitable for industrial and mobile hydraulic applications.

Interchangeable with other fittings manufactured according to ISO7241-1 B series.

QUiCk RELEASE fiTTiNGS AND SwivELS PRODUCT GROUP 520/523/524


5553-02/03HANSEN HkP iSO b


1/8" 5553-02-02 5553-03-02 27.5 G 1/8" F 60.0 mm 1/4" 5553-02-04 5553-03-04 25.5 G 1/4" F 71.0 mm 3/8" 5553-02-06 5553-03-06 25.5 G 3/8" F 81.0 mm 1/2" 5553-02-08 5553-03-08 34.5 G 1/2" F 91.0 mm 3/4" 5553-02-12 5553-03-12 27.5 G 3/4" F 108.0 mm 1" 5553-02-16 5553-03-16 27.5 G 1" F 136.0 mm

PRODUCT GROUP 520Quick release fitting with dimensions and performance equivalent to ISO 7241-1 B series.

Suitable for industrial and mobile hydraulic applications.

Interchangeable with other fittings manufactured according to ISO7241-1 B series.

5558-14/15fASTER Nv, PROTECTiON

Plastic (1/4"–3/4") / Metal (1"–2")

Dim. Male Female

1/4" 5558-14-04 5558-15-04 3/8" 5558-14-06 5558-15-06 1/2" 5558-14-08 5558-15-08 3/4" 5558-14-12 5558-15-12 1" 5558-14-16 5558-15-16 1 1/4" 5558-14-20 5558-15-20 1 1/2" 5558-14-24 5558-15-24 2" 5558-14-32 5558-15-32

PRODUCT GROUP 520Dust cover, for male

Dust cover, for female5558-16fASTER Nv

SPARE PART kiT

Dim. Spare part kit

1/4" 5558-16-04 3/8" 5558-16-06 1/2" 5558-16-08 3/4" 5558-16-12 1" 5558-16-16 1 1/4" 5558-16-20 1 1/2" 5558-16-24 2" 5558-16-32

PRODUCT GROUP 520

5553-04/05DUST COvER, iSO b

Red

Dim. Male Female

1/4" 5553-04-04 5553-05-04 3/8" 5553-04-06 5553-05-06 1/2" 5553-04-08 5553-05-08 3/4" 5553-04-12 5553-05-12 1" 5553-04-16 5553-05-16

PRODUCT GROUP 520



5553-06/07HANSEN HkP

O-RiNG/T-RiNG

Dim. O-ring T-ring

1/8" 5553-06-02 5553-07-02 1/4" 5553-06-04 5553-07-04 3/8" 5553-06-06 5553-07-06 1/2" 5553-06-08N 5553-07-08N 3/4" 5553-06-12N 5553-07-12N 1" 5553-06-16N 5553-07-16N

PRODUCT GROUP 520

5558-02/03fASTER Nv


1/4" 5558-02-04 5558-03-04 35.0 G 1/4" F 66.0 mm 3/8" 5558-02-06 5558-03-06 30.0 G 3/8" F 78.0 mm 1/2" 5558-02-08 5558-03-08 30.0 G 1/2" F 88.0 mm 3/4" 5558-02-12 5558-03-12 25.0 G 3/4" F 107.0 mm 1" 5558-02-16 5558-03-16 23.0 G 1" F 132.0 mm 1 1/4" 5558-02-20 5558-03-20 22.0 G 1 1/4" F 146.0 mm 1 1/2" 5558-02-24 5558-03-24 18.0 G 1 1/2" F 166.0 mm 2" 5558-02-32 5558-03-32 13.0 G 2" F 200.0 mm

PRODUCT GROUP 520Standard fitting for normal hydraulic applications within industries and agriculture.

Dim. 1/2" is interchangeable with all ISO 7241-1 A series fittings.



5:20

5551-02/5558-07fASTER QR/Pv

PUSH-PULL


1/2" 5551-02-08 5558-07-08 30.0 G 1/2" F 88.0 mm

PRODUCT GROUP 520

Panel mounted Push-Pull quick release fitting, which means that the hose is protected in case of an accidental disconnection.

Used with a male part according to ISO 7241-1 A series.

5CxxCEJN SERiES 525

Dim. DN Male Female PN MPa Thread Flow l/m Length M Length F

1/4" 6.3 5C10 525 6202 5C10 525 1202 30 G 1/4" F 29 48.2 60.0 3/8" 10.0 5C10 525 6204 5C10 525 1204 28 G 3/8" F 59 38.0 61.6 1/2" 12.5 5C10 525 6205 5C10 525 1205 25 G 1/2" F 100 42.5 67.6 5/8" 16.0 5C10 525 6207 5C10 525 1207 20 G 3/4" F 194 47.0 76.2 3/4" 19.0 5C10 525 6209 5C10 525 1209 25 G 1" F 285 56.5 92.0

CEJN-SERiES 525 wiTH ELiMiNATOR 3/8" 10.0 5C10 525 6234 5C10 525 1234 28 G 3/8" F 59 38.0 61.6 1/2" 12.5 5C10 525 6235 5C10 525 1235 25 G 1/2" F 100 42.5 67.6 5/8" 16.0 5C10 525 6237 5C10 525 1237 20 G 3/4" F 194 47.0 76.2 3/4" 19.0 5C10 525 6239 5C10 525 1239 25 G 1" F 285 56.5 92.0

PRODUCT GROUP 524

The 525 series is made in a heavy duty steel design. Parts that are exposed to big strains are made of hardened steel, which gives the maximum life-span in tough applications.

5CxxDUST COvER,

CEJN SERiES 525

Dim. DN Male Female

1/4" 6.3 5C093751051 5C093951001 3/8" 10.0 5C094751051 5C094751001 1/2" 12.5 5C095751051 5C095951001 5/8" 16.0 5C096751051 5C096751001 3/4" 19.0 5C097751051 5C097751001



5CxxSPARE PART kiT,

CEJN SERiES 525

Dim. Spare part kit

1/4" 5C105254900 3/8" 5C105254901 1/2" 5C105254902 5/8" 5C105254903 3/4" 5C105254904

PRODUCT GROUP 524



5TxxTEMA STANDARD, T SERiES

Dim. Male Tema descr. Female Tema descr. PN MPa Thread Length

1/8" 5T2320 2320 5T2310 2310 20.0 G 1/8" F 59.0 mm 1/4" 5T2520 2520 5T2510 2510 45.0 G 1/4" F 81.0 mm 3/8" 5T3820 3820 5T3810 3810 35.0 G 3/8" F 74.0 mm 1/2" 5T5020 5020 5T5010 5010 30.0 G 1/2" F 82.0 mm 3/4" 5T7520 7520 5T7510 7510 28.0 G 3/4" F 91.0 mm 1" 5T10020 10020 5T10010 10010 25.0 G 1" F 108.0 mm 1 1/2" 5T15020 15020 5T15010 15010 20.0 G 1 1/2" F 173.0 mm 2" 5T20020 20020 5T20010 20010 18.0 G 2" F 224 mm

T-SERiES wiTH ELiMiNATOR 3/8" 5T3821 3821 5T3811 3811 35.0 G 3/8" F 74.0 mm 1/2" 5T5021 5021 5T5011 5011 30.0 G 1/2" F 82.0 mm 3/4" 5T7521 7521 5T7511 7511 28.0 G 3/4" F 91.0 mm 1" 5T10021 10021 5T10011 10011 25.0 G 1" F 108.0 mm 1 1/2" 5T15021 15021 5T15011 15011 20.0 G 1 1/2" F 173.0 mm

PRODUCT GROUP 523

Quick release fittings for mobile and industrial applications. TEMA's patented pressure eliminator enables assembly at enclosed and built-up pressure.

5TxxTEMA DUST COvER

5TxxTEMA GREASE NiPPLE

Dim. Male Tema descr. Female Tema descr.

1/8" 5T125 125 5T2315 2315 1/4" 5T2526 2526 5T2516 2516 3/8" 5T3826 3826 5T3816 3816 1/2" 5T5026 5026 5T5016 5016 3/4" 5T7526 7526 5T7516 7516 1" 5T10026 10026 5T10016 10016 1 1/2" 5T15025 15025 5T15015 15015 2" 5T20025 20025 5T20015 20015

Part number Tema descr. Type Dim.

5TGR 1 GR 1 Complete kit5TGR 2400G GR 2 Tube with grease 400g5TGR 3 T GR 3 Grease nipple 3/8"5TGR 5 T GR 5 Grease nipple 1/2"5TGR 7 T GR 7 Grease nipple 3/4"5TGR 10 T GR 10 Grease nipple 1"

Dim. Nitrile kit Tema descr. Viton kit Tema descr.

1/8" 5T11310N T11310N 5T11310V T11310V 1/4" 5T2500PSN 2500PSN 5T2500PSV 2500PSV 3/8" 5T3800PSN 3800PSN 5T3800PSV 3800PSV 1/2" 5T5000PSN 5000PSN 5T5000PSV 5000PSV 3/4" 5T7500PSN 7500PSN 5T7500PSV 7500PSV 1" 5T10000PSN 10000PSN 5T10000PSV 10000PSV 1 1/2" 5T15000PSN 15000PSN 5T15000PSV 15000PSV 2" 5T20000PSN 20000PSN 5T20000PSV 20000PSV

PRODUCT GROUP 523

PRODUCT GROUP 523



5TxxTEMA

SPARE PART kiT

PRODUCT GROUP 523



5:20

5558-38/39fASTER vv, PROTECTiON

Metal

Dim. Male Female

1/4" 5558-38-04 5558-39-04 3/8" 5558-38-06 5558-39-06 1/2" 5558-38-08 5558-39-08 3/4" 5558-38-12 5558-39-12 1" 5558-38-16 5558-39-16


Dust cover, for female5558-24fASTER vv

SPARE PART kiT

Dim. Spare part kit

1/4" 5558-24-04 3/8" 5558-24-06 1/2" 5558-24-08 3/4" 5558-24-12 1" 5558-24-16

PRODUCT GROUP 520

5558-22/23fASTER vv

Threaded


1/4" 5558-22-04 5558-23-04 35.0 G 1/4" F 60.0 mm 3/8" 5558-22-06 5558-23-06 30.0 G 3/8" F 78.0 mm 1/2" 5558-22-08 5558-23-08 30.0 G 1/2" F 88.0 mm 3/4" 5558-22-12 5558-23-12 25.0 G 3/4" F 110.0 mm 1" 5558-22-16 5558-23-16 23.0 G 1" F 132.0 mm

PRODUCT GROUP 520

Threaded quick release fitting for standardised hydraulic applica-tions. Thanks to the threads, it is possible to assemble the valve even when there is some pressure left in the system. The threading also prevents accidental disconnection.

5558-66/67fASTER PvvM, PROTECTiON

Metal

Dim. Male Female

1/4" 5558-66-04 5558-67-04 3/8" 5558-66-06 5558-67-06



5558-69fASTER PvvM

SPARE PART kiT

Dim. Spare part kit

1/4" 5558-69-04 3/8" 5558-69-06

PRODUCT GROUP 520

5558-64/65fASTER PvvM

NPT-threaded

Dim. Male Thread Female Thread PN MPa Length

1/4" 5558-64-04 1/4" NPT F 5558-65-04 1/4" NPT M 35.0 74.0 mm 3/8" 5558-64-06 3/8" NPT F 5558-65-06 3/8" NPT M 30.0 82.0 mm

PRODUCT GROUP 523

Threaded quick release fitting possible to connect during very high static pressures. Used for e.g. hydraulic jacks.

5TffTEMA ff

Drip-free


1/2" 5TFF5020 FF5020 5TFF5010 FF5010 40.0 G 1/2" F 144.0 mm 3/4" 5TFF7520 FF7520 5TFF7510 FF7510 40.0 G 3/4" F 169.0 mm 1" 5TFF10020 FF10020 5TFF10010 FF10010 30.0 G 1" F 230.0 mm

PRODUCT GROUP 523

Drip-free quick release fitting for industrial and mobile applications.



5TffTEMA ff

Nipple with eliminator

5CX65CEJN

Drip-free, ISO 16028


Dim. DN Male Female PN MPa Thread Flow l/m Length male Length female

1/2" 5TFF5021 FF5021 5TFF5010 FF5010 40.0 G 1/2" F 179.0 mm 3/4" 5TFF7521 FF7521 5TFF7510 FF7510 40.0 G 3/4" F 215.0 mm 1" 5TFF10021 FF10021 5TFF10010 FF10010 30.0 G 1" F 269.0 mm

1/4" 6.3 5C10 265 6202 5C10 265 1202 31.5 G 1/4" F 12 48.7 58.1 3/8" 10.0 5C10 365 6204 5C10 365 1204 25.0 G 3/8" F 23 55.1 67.5 3/8" 10.0 5C10 365 6205 5C10 365 1205 25.0 G 1/2" F 23 58.5 70.9 1/2" 12.5 5C10 565 6205 5C10 565 1205 25.0 G 1/2" F 45 71.4 74.8 1/2" 12.5 5C10 565 6207 5C10 565 1207 25.0 G 3/4" F 45 72.9 76.3 5/8" 16.0 5C10 665 6201 5C10 665 1201 25.0 G 3/4" F 74 74.9 79.8 3/4" 19 5C10 765 6203 5C10 765 1203 25.0 G 1" F 100 93.1 99.0

PRODUCT GROUP 523

PRODUCT GROUP 524

Same as 5TFF, but with TEMA's patented pressure eliminator that enables assembly in enclosed and built-up pressures.

Drip-free quick release fitting for industrial and mobile applications. The X65 series is made according to ISO 16028, which makes it possible to assembly it with other manufactures. Equipped with an extra lock func-tion that protects against accidental disconnection.

5TffTEMA DUST COvER


1/2" 5TFF5026 FF5026 5TFF5016 FF5016 3/4" 5TFF7526 FF7526 5TFF7516 FF7516 1" 5TFF10026 FF10026 5TFF10016 FF10016




5TffTEMA

SPARE PART kiT

Dim. Spare part kit Tema descr.

1/2" 5TFF5000 PSPU FF5000 PSPU 3/4" 5TFF7500 PSPU FF7500 PSPU 1" 5TFF10000 PSPU FF10000 PSPU

PRODUCT GROUP 524

5CX65CEJN DUST COvER

ISO 16028

Dim. DN Male Female

1/4" 6,3 5C09 265 1050 5C09 265 1000 3/8" 10 5C09 365 1050 5C09 365 1000 1/2" 12,5 5C09 565 1050 5C09 565 1000 5/8" 16 5C09 665 1050 5C09 665 1000 3/4" 19 5C09 765 1050 5C09 765 1000





5:20

5TifTEMA if

Drip-free ISO 16028 with eliminator

Dim. Male Tema descr. Female Tema descr. PN MPa Thread

1/4" 5TIF2521 IF2521 5TIF2511 IF2511 31.5 G 1/4" F 3/8" 5TIF3821 IF3821 5TIF3811 IF3811 25.0 G 3/8" F 1/2" 5TIF5021 IF5021 5TIF5011 IF5011 25.0 G 1/2" F 5/8" 5TIF6321 IF6321 5TIF6311 IF6311 25.0 G 3/4" F 3/4" 5TIF7521 IF7521 5TIF7511 IF7511 25.0 G 3/4" F 1" 5TIF10021 IF10021 5TIF10011 IF10011 20.0 G 1" F 1" 5TIF10021125 IF10021-125 5TIF10021125 IF10021-125 20.0 G 1 1/4" F

PRODUCT GROUP 523

Same as 5TIF, but with TEMA's patented pressure eliminator that enables assembly in enclosed and built-up pressures.

5Tif/5TffTEMA, GREASE NiPPLE

Dim. Serie Part number

3/8" IF / X65 5TGRIF38 1/2" IF / X65 5TGRIF50 1/2" FF 5TGRF5 5/8" IF / X65 5TRGIF63 3/4" FF 5TGRF7 3/4" IF / X65 5TGRIF75 1" IF / X65 5TGRIF100 1" FF 5TGRF10

Used with TEMA 5TIF/5TFF to prevent that the locking sleeve gets stuck. The cause of this can be road dust or frozen water.

PRODUCT GROUP 523

5TifTEMA DUST COvER


1/4" 5TIF2526 IF2526 5TIF2516 IF2516 3/8" 5TIF3826 IF3826 5TIF3816 IF3816 1/2" 5TIF5026 IF5026 5TIF5016 IF5016 5/8" 5TIF6326 IF6326 5TIF6316 IF6316 3/4" 5TIF7526 IF7526 5TIF7516 IF7516 1" 5TIF10026 IF10026 5TIF10016 IF10016

PRODUCT GROUP 523 PRODUCT GROUP 523Dust cover, for male


5TifTEMA

SPARE PART kiT

Dim. Spare part kit Tema descr.

1/4" 5TIF2500PSPU IF2500PSPU 3/8" 5TIF3800PSPU IF3800PSPU 1/2" 5TIF5000PSPU IF5000PSPU 5/8" 5TIF6300PSPU IF6300PSPU 3/4" 5TIF7500PSPU IF7500PSPU 1" 5TIF10000PSPU IF10000PSPU



5558-40/41fASTER 2ffN, PROTECTiON

Metal

Dim. Male Female

3/8" 5558-40-06 5558-41-06 1/2" 5558-40-08 5558-41-08 3/4" 5558-40-12 5558-41-12 1" 5558-40-16 5558-41-16



5558-20fASTER 2ffN

SPARE PART kiT

Dim. Male kit Female kit

3/8" 5558-20-06M 5558-20-06F 1/2" 5558-20-08M 5558-20-08F 3/4" 5558-20-12M 5558-20-12F 1" 5558-20-16M 5558-20-16F

PRODUCT GROUP 520

5558-18/19fASTER 2ffN

Drip-free with safety lock

5559-12/13bRUNiNG NS-SERiES

Drip-free



3/8" 5558-18-06 5558-19-06 20.0 G 3/8" F 107.0 mm 1/2" 5558-18-08 5558-19-08 22.0 G 1/2" F 125.0 mm 3/4" 5558-18-12 5558-19-12 30.0 G 3/4" F 174.0 mm 1" 5558-18-16 5558-19-16 30.0 G 1" F 217.0 mm

3/8" 5559-12-06 5559-13-06 17.5 G 3/8" F 73.0 mm 1/2" 5559-12-08 5559-13-08 17.5 G 1/2" F 95.0 mm 3/4" 5559-12-12 5559-13-12 17.5 G 3/4" F 101.0 mm 1" 5559-12-16 5559-13-16 17.5 G 1" F 115.0 mm

PRODUCT GROUP 520

PRODUCT GROUP 520

Drip-free quick release fitting for hydraulic applications. Does not leak during disassembly, but is easy to clean thanks to the flat sealing surface.

Drop-free quick release fitting for industrial and mobile applications.

5559-14bRUNiNG, PROTECTiON

Dim. Male/female

3/8" 5559-14-06 1/2" 5559-14-08 3/4" 5559-14-12 1" 5559-14-16

PRODUCT GROUP 520



5:20

5558-48/49fASTER 3 ffv

Drip-free


3/8" 5558-48-06 5558-49-06 30.0 G 3/8" F 134.9 mm 1/2" 5558-48-08 5558-49-08 30.0 G 1/2" F 151.5 mm 3/4" 5558-48-12 5558-49-12 30.0 G 3/4" F 181.5 mm 1" 5558-48-16 5558-49-16 40.0 G 1" F 196.7 mm 1 1/4" 5558-48-20 5558-49-20 40.0 G 1 1/4" F 201.7 mm1 1/2" 5558-48-24 5558-49-24 40.0 G 1 1/2" F 229.4 mm

PRODUCT GROUP 520

Drip-free threaded quick release fitting especially suited for systems with high pulsating pressures. The fitting can be assembled even when it is put into pressure. The threading also prevents accidental disconnection.

5558-58fASTER 3ffv, PROTECTiON

Male/female

Dim. Male/female

3/8" 5558-58-06 1/2" 5558-58-08 3/4" 5558-58-12 1" 5558-58-16 1 1/2" 5558-58-24

PRODUCT GROUP 520

5558-44fASTER 3ffv

SPARE PART kiT

Dim. Male kit Female kit

3/8" 5558-44-06M 5558-44-06F 1/2" 5558-44-08M 5558-44-08F 3/4" 5558-44-12M 5558-44-12F 1" 5558-44-16M 5558-44-16F 1 1/2" 5558-44-24M 5558-44-24F

PRODUCT GROUP 520

5558-80/81fASTER Cvv

Threaded for high pulsation pressure

Dim. Male Female PN MPa Thread Flow l/m Length Other info

04 5558-80-04 5558-81-04 48.0 M 14 x 1.5 F 13 90.5 mm 06 5558-80-06 5558-81-06 38.0 G 3/8" M 30 92.5 mm 60° cone 08 5558-80-08 5558-81-08 34.0 G 1/2" F 75 102.6 mm O-ring 16 5558-80-12 5558-81-12 33.0 G 3/4" F 250 144.8 mm 16 5558-80-16 5558-81-16 33.0 G 1" F 250 150.8 mm O-ring 16 5558-80-17 5558-81-17 33.0 G 1" F 250 150.8 mm 16 5558-80-36 5558-81-36 33.0 M 36 x 2 M 25S 250 178.8 mm Bulkhead 24 5558-80-20 5558-81-20 37.0 M 42 x 2 M 30S 450 196.0 mm Viton 24 5558-80-22 5558-81-22 37.0 M 52 x 2 M 38S 450 196.0 mm Viton

PRODUCT GROUP 524

Material: Steel zinc plated / yellow chromated, hardened valve Seal: Nitrile, upon request Viton and EPDM as well Working temp: -25°C to 125°C. Higher temperatures upon request.

5558-86/87fASTER Cvv, PROTECTiON

Plastic

Dim. Male Female

04 5558-86-04 5558-87-04 06 5558-86-06 5558-87-06 08 5558-86-08 5558-87-08 16 5558-86-16 5558-87-16 24 5558-86-24 5558-87-24

PRODUCT GROUP 520





5CxxCEJN STANDARD

Drip-free

5CxxCEJN SERiES 115

Drip-free. High pressure hydraulics. Bore 3 mm



1/4" 5C10 325 6202 5C10 325 1202 25.0 G 1/4" F 89.0 mm 3/8" 5C10 415 6204 5C10 325 1204 25.5 G 3/8" F 102.0 mm 1/2" 5C10 415 6205 5C10 325 1205 25.0 G 1/2" F 109.0 mm 3/4" 5C10 605 6201 5C10 325 1201 32.0 G 3/4" F 131.0 mm 1" 5C10 705 6203 5C10 325 1203 32.0 G 1" F 146.0 mm

1/4" 5C10 115 6202 5C10 115 1202 100.0 G 1/4" F 75.0 mm 3/8" 5C10 115 6204 5C10 115 1204 100.0 G 3/8" F 79.0 mm 1/4" 5C10 115 6202 5C10 116 1202 150.0 G 1/4" F 75.0 mm 1/4" 5C10 1151 222 5C10 115 1202 200.0 G 1/4" F 79.0 mm

PRODUCT GROUP 524

PRODUCT GROUP 524

Quick release fitting for low and medium working pressures. Used in industrial and mobile applications, such as trailers and cranes.

Drip-free quick release fitting for very high pressures.

Especially suited for e.g. hydraulic pumps, lever jacks and salvage equipment.

STUCCHi, PROTECTiON

Aluminium. Red

Dim. Male Female

1/4" (07) 5S815300051 5S815300050 3/8" (09) 5S815300053 5S815300052 1/2" (13) 5S815300055 5S815300054 3/4" (15) 5S815300057 5S815300056 1" (17) 5S815300059 5S815300058 1 1/4" (21) 5S815300061 5S815300060 1 1/2" (30) 5S815300063 5S815300062

PRODUCT GROUP 520



STUCCHi vP

Threaded fitting for high pulsating pressure "Hammer hydraulics"

Dim. Male Female PN MPa Thread

1/4" (07) 5S801900001 5S801900000 60.0 G 1/4" F 3/8" (09) 5S807300003 5S807300002 55.0 G 3/8" F 3/8" (09) 5S807300005 5S807300004 55.0 G 1/2" F 1/2" (13) 5S807300007 5S807300006 55.0 G 1/2" F 1/2" (13) 5S807300009 5S807300008 55.0 G 3/4" F 3/4" (15) 5S807300010 5S807300011 55.0 G 3/4" F 1" (17) 5S807300013 5S807300012 50.0 G1" F 1 1/4" (21) 5S807300015 5S807300014 47.0 G 1 1/4" F 1 1/2" (30) 5S807300017 5S807300016 40.0 G 1 1/2" F

PRODUCT GROUP 520Material: Steel QPC/yellow Seal: Nitrile, -40° – +100°C



5:20

5558-xxMULTifASTER

Drip-free quick release fittings for multi-assembling

Dim. Part number Type Connection Thread PN MPa Handle Flow l/m

3/8" 5558-90-06 2P Complete 2 Hydraulic fittings G 3/8" F 35.0 U-handle 40 3/8" 5558-91-06 2P Complete 4 Hydraulic fittings G 3/8" F 35.0 U-handle 40 1/2" 5558-90-08 2P Complete 2 Hydraulic fittings G 1/2" F 35.0 U-handle 70 1/2" 5558-91-08 2P Complete 4 Hydraulic fittings G 1/2" F 35.0 U-handle 70

3/4" 5558-89-12 3P Complete 1 Hydraulic fittings G 3/4" F 35.0 Straight handle 105 1" 5558-89-16 3P Complete 1 Hydraulic fittings G 1" F 35.0 Straight handle 150 3/8" 5558-88-06 3P Complete 4 Hydraulic fittings G 3/8" F 35.0 U-handle 40 1/2" 5558-88-08 3P Complete 4 Hydraulic fittings G 1/2" F 35.0 U-handle 70

3/8" 5558-70-06 3P Complete 2 Hydraulic fittings G 3/8" F 35.0 U-handle 40 1/2" 5558-70-08 3P Complete 2 Hydraulic fittings G 1/2" F 35.0 U-handle 70

3/8" 5558-91-86 3P Complete 8 Hydraulic fittings G 3/8" F 35.0 U-handle 40 3/4" 5558-99-69 3P Complete 2 Hydraulic fittings G 3/4" F 35.0 Straight handle 105 3/4" 5558-99-70 3P Complete 2 Hydraulic fittings 1 pcs G 3/4" F 35.0 Straight handle 105 1 pcs G 1" F 35.0 150

1/2" 5558-99-92 3P Complete 6 Hydraulic fittings G 1/2" F 35.0 Straight handle 70 1/2" 5558-99-92F 3P Female part 6 Hydraulic fittings G 1/2" F 35.0 Straight handle 70 1/2" 5558-99-92M 3P Male part 6 Hydraulic fittings G 1/2" F 35.0 70

5558-99-97 3P Complete 3 Hydraulic fittings 1 pcs G 1/2" F 35.0 Straight handle 70 1 Electrical socket 2 pcs G 3/4" F 105 1 pcs EL-3pol 5558-99-97M 3P Male part 3 Hydraulic fittings 1 pcs G 1/2" F 35.0 70 1 Electrical socket 2 pcs G 3/4" F 105 1 pcs EL-3pol

PRODUCT GROUP 520

A system that enables you to connect several drip-free quick release fittings and/or electric contacts, in a one-quick operation.

Used in e.g. mobile and industrial applications where quick tool exchanges are needed.

Available in a number of different dimensions, from 1/4" to 1 1/2".

Safety factor: 3:1



MULTiCONNECTApplicationsThis multi-connect fitting can be used on all types of applications when there is a need to change multi-lined tools, on for example snow ploughs, excavators and cranes.

functionsQuick: Connecting and disconnection 2 to 10 hydraulic lines in one instant. Can also be connected during working pressure.

Versatile: Can be used for both hydraulic and electrical applications.

Environmentally friendly: Drip-free fittings minimizes leakage and prevents dirt from entering the system.

Safety: Precludes faulty connections.

What is shown on the following pages is only a small portion of the MultiConnect product range that Hydroscand offer. Contact your nearest Hydroscand office for more information.

Ergonomic handle for easy connection

even during working pressure

Safety lock preventing

unintentional disconnection

Additional electrical sockets. 7 wires,

15 Amp (only type "GR")

Protective housing

Guide stick

Drip-free hydraulic "flat-face" fitting



5:20

MULTiCONNECT 2 GATES

DP type


GR type

MULTiCONNECT PLATE, 4 GATES

GRI type


DP type

Part number Description Thread WP plate WP fitting


Part number Description WP, MPa Connections


5SDP291000M DP2-9 2x9 mobile 3/8" BSP 70.7 MPa 35.0 MPa

5SDP291000F DP2-9 2x9 fixed 3/8" BSP 70.7 MPa 35.0 MPa



Accessories

5S815606028 Protection cover for DP2-9 fixed

5S815606029 Parking station for DP2-9 mobile



5SGR391000M GR3-9 3x9 mobile 3/8" BSP 66.5 MPa 35.0 MPa

5SGR391000F GR3-9 3x9 fixed 3/8" BSP 66.5 MPa 35.0 MPa



Accessories

5S815606008 Protection cover for GR3-9 fixed

5S815606009 Parking station for GR3-9 mobile

5S806000016 Connection plate fixed 33.0 2DN, 1DN15, 1DN 17

5S806000017 Connection plate mobile 33.0 2DN, 1DN15, 1DN 17

Accessories

5S815606016 Protection cover for GRI4 fixed

5S815606001 Parking station for GRI4 mobile





Accessories





PRODUCT GROUP 520

PRODUCT GROUP 520

PRODUCT GROUP 520

MULTiCONNECT PLATE, 6 GATES

GRM type

Part number Description WP, MPa Connections

5S806000032 Connection plate fixed 33.0 2DN, 2DN15, 2DN 17

5S806000033 Connection plate mobile 33.0 2DN, 2DN15, 2DN 17

Accessories

5S815606018 Protection cover for GRM6 fixed

5S815606013 Parking station for GRM6 mobile

PRODUCT GROUP 520

PRODUCT GROUP 520

GR SpecialGR Special is a system that enables unique assemblies of MultiConnections. The choice of plate is made by the number of connec-tions needed. The choice of couplings is made by the size and thread needed. Below is only two examples from our GR Special product range; contact your nearest Hydroscand office for more information.


GR type






Accessories





PRODUCT GROUP 520

17 15

15 17

9 915

17

9 9



MULTiCONNECT HYDRAULiC COUPLiNGS

For plate DP2-9, GR3-9, DP4-9, GR6-9 Connection DN9


For plate GRI4 and GRM6 Connection DN9


For all plates

MULTiCONNECT ELECTRiCAL SOCkETS

For plate GRI4 and GRM6


For plate GR3-13 and GR6-13

Part number Type Thread WP, MPa Lock nut part no. Part number Type Thread WP, MPa Lock nut part no.

Part number Type Thread WP, MPa Connection Lock nut part no.

5S805000052 Female G 3/8" F 35.0 5S808200002

5S805000053 Male G 3/8" F 35.0 5S808200003

5S805000050 Female G 1/2" F 35.0 5S808200006

5S805000051 Male G 1/2" F 35.0 5S808200007

5S805000074 Female G 3/8" F 35.0 5S808200004

5S805000075 Male G 3/8" F 35.0 5S808200005

5S805000072 Female G 1/2" F 35.0 5S808200008

5S805000073 Male G 1/2" F 35.0 5S808200009

5S805000056 Female G 1/2" F 33.0 DN13 5S808200010

5S805000057 Male G 1/2" F 33.0 DN13 5S808200011

5S805000058 Female G 3/4" F 33.0 DN13 5S808200012

5S805000059 Male G 3/4" F 33.0 DN13 5S808200013

5S805000078 Female G 3/4" F 33.0 DN15 5S808200014

5S805000079 Male G 3/4" F 33.0 DN15 5S808200015

5S805000082 Female G 1" F 33.0 DN17 5S808200016

5S805000083 Male G 1" F 33.0 DN17 5S808200017

5S805000084 Female G 1 1/4" F 30.0 DN21 5S808200018

5S805000085 Male G 1 1/4" F 30.0 DN21 5S808200019


PRODUCT GROUP 520

PRODUCT GROUP 520

PRODUCT GROUP 520

This is only a small portion of the MultiConnect product range that Hydroscand offer. Contact your

nearest Hydroscand office for more information.

Part number Type Connection Socket.



For plate GR3-9 and GR6-9

PRODUCT GROUP 520


5S806422000 Female DN9 6 wires, 15 Amp5S806422001 Male DN9 6 wires, 15 Amp5S806422012 Female DN9 7 wires, 15 Amp5S806422013 Male DN9 7 wires, 15 Amp

5S806422000 Female DN9 6 wires, 15 Amp5S806422007 Male DN9 6 wires, 15 Amp5S806422012 Female DN9 7 wires, 15 Amp5S806422019 Male DN9 7 wires, 15 Amp

5S806422010 Female DN13 6 wires, 15 Amp5S806422011 Male DN13 6 wires, 15 Amp



5:20

MULTiCONNECT LOCk RiNGS

With locking washer

MULTiCONNECT PLUGS

MULTiCONNECT SEAL kiT

MULTiCONNECT SPARE PART kiT





5S500600005 DN95S500600006 DN135S500600023 DN155S500600018 DN175S500600035 DN21

5S525000129 Plug DN9 fixed DN95S525100088 Plug DN9 mobile DN95S525000136 Plug DN13 fixed DN135S525100089 Plug DN13 mobile DN135S525000137 Plug DN15 fixed DN155S525100090 Plug DN15 mobile DN155S525000138 Plug DN17 fixed DN175S525100091 Plug DN17 mobile DN17

5S815700337 Seal kit for FAP male part, DN95S815700339 Seal kit for FAP male part, DN135S815700341 Seal kit for FAP male part, DN175S815700655 Seal kit for FAP male part, DN21

5S815700582 Spare part kit for FAP female part, DN95S815700583 Spare part kit for FAP male part, DN95S815700584 Spare part kit for FAP female part, DN135S815700585 Spare part kit for FAP male part, DN135S815700662 Spare part kit for FAP female part, DN155S815700663 Spare part kit for FAP male part, DN155S815700664 Spare part kit for FAP female part, DN175S815700665 Spare part kit for FAP male part, DN17

PRODUCT GROUP 520

PRODUCT GROUP 520

PRODUCT GROUP 520

PRODUCT GROUP 520

This is only a small portion of the MultiConnect product range that Hydroscand offer. Contact your

nearest Hydroscand office for more information.



TEMA 1100COMPRESSED AiR fiTTiNGS

Bore: 5.5 mm PN = 3 MPa

TEMA 1100NCOMPRESSED AiR fiTTiNGS

Bore: 5.5 mm PN = 3 MPa M = Brass, chromium-plated

TEMA 1300/1300ECOMPRESSED AiR fiTTiNGS

Bore: 6.8 mm PN = 3 MPa E = One-handed

Part number Tema descr. Type Seal Connection



5T1100 1100 Female NBR G 1/8"F5T1100A 1100A Female NBR G 1/4"M5T1100V 1100V Female Viton G 1/8"F5T1100AV 1100AV Female Viton G 1/4"M

5T11110 11110 Male G 1/8"M5T11410 11410 Male G 1/8"F5T11005 11005 Male Hose 5 mm5T11006 11006 Male Hose 6 mm

5T11310N 11310N O-ring NBR5T11310V 11310V O-ring Viton

NB! The 1100 series is not connectable with the 1100N series.

5T1100N 1100N Female NBR G 1/8"F5T1100NA 1100NA Female NBR G 1/4"M5T1100NV 1100NV Female Viton G 1/8"F5T1100NAV 1100NAV Female Viton G 1/4"M

5T11410MEP 11410MEP Male NBR G 1/8"F5T11410MN 11410MN Male EPDM G 1/8"F5T11410MV 11410MV Male Viton G 1/8"F

5T11310EP 11310EP O-ring EPDM5T11310N 11310N O-ring NBR5T11310V 11310V O-ring Viton

NB! The 1100N series is not connectable with the 1100 series.

5T1300 1300 Female NBR G 1/4"F5T1300A 1300A Female NBR G 3/8"M5T1300B 1300B Female NBR G 3/8"F5T1300E 1300E Female NBR G 1/4"F5T1300V 1300V Female Viton G 1/4"F

5T1300EA 1300EA Female NBR R 3/8"M5T1300EB 1300EB Female NBR G 3/8"F5T1300EC 1300EC Female NBR R 1/4"M5T1300ED 1300ED Female NBR R 1/2"M

5T1300EK06 1300EK06 Female Hose 6 mm5T1300EK08 1300EK08 Female Hose 8 mm5T1300EK10 1300EK10 Female Hose 10 mm5T1300EK12 1300EK12 Female Hose 2 mm

5T13110 13110 Male R 1/8"M5T13210 13210 Male G 1/4"M 5T13220 13220 Male R 3/8"M5T13230 13230 Male R 1/2"M

5T13405 13405 Male G 1/8"F5T13410 13410 Male G 1/4"F5T13420 13420 Male G 3/8"F5T13430 13430 Male G 1/2"F

5T13006 13006 Male Hose 6 mm5T13008 13008 Male Hose 8 mm5T13010 13010 Male Hose 10 mm5T13012 13012 Male Hose 12 mm

5T13310 13310 Seal NBR

NB! The 1300/1300E series is not connectable with the 1300N series.

PRODUCT GROUP 523

PRODUCT GROUP 523

PRODUCT GROUP 523



5:20

TEMA 1600COMPRESSED AiR fiTTiNGSBore flow: 6.7 mm PN = 3 MPa S = Safety nipple. Eur-standard


PN = 3 MPa

TEMA 1625COMPRESSED AiR fiTTiNGSBore flow: 6.7 mm PN = 3 MPa S = Safety nipple. Eur-standard

Part number Tema descr. Type Connection Part number Tema descr. Type Connection

Part number Tema descr. Type Connection

5T1600 1600 Female G 1/4"F5T1600A 1600A Female R 3/8"M5T1600B 1600B Female G 3/8"F5T1600C 1600C Female R 1/2"M5T1600D 1600D Female R 1/4"M5T1600F 1600F Female G 1/2"F

5T1600K06 1600K06 Female Hose 6 mm5T1600K08 1600K08 Female Hose 8 mm5T1600K10 1600K10 Female Hose 10 mm5T1600K12 1600K12 Female Hose 12 mm

5T16110 16110 Male R 1/8" M5T16210 16210 Male R 1/4"M5T16220 16220 Male R 3/8"M5T16230 16230 Male R 1/2"M

5T16405 16405 Male G 1/8"F5T16410 16410 Male G 1/4"F5T16420 16420 Male G 3/8"F5T16430 16430 Male G 1/2"F5T16410S 16410S Male G 1/4"F

5T16006 16006 Male Hose 6 mm5T16008 16008 Male Hose 8 mm5T16010 16010 Male Hose 10 mm 5T16012 16012 Male Hose 12 mm

5T13320 13320 Seal 1/4"5T18320 18320 Seal 3/8"

5T1650D 1650D Female R 1/4"M 5T1650A 1650A Female R 3/8"M5T1650C 1650C Female R 1/2"M

5T1650 1650 Female G 1/4"F5T1650B 1650B Female G 3/8"F5T1650F 1650F Female G 1/2"F

5T1650K06 1650K06 Female Hose 6 mm5T1650K08 1650K08 Female Hose 8 mm5T1650K10 1650K10 Female Hose 10 mm5T1650K12 1650K12 Female Hose 12 mm

5T165110 165110 Male R 1/8"M5T165210 165210 Male R 1/4"M5T165220 165220 Male R 3/8"M5T165230 165230 Male R 1/8"M

5T165405 165405 Male G 1/8"F5T165410 165410 Male G 1/4"F5T165420 165420 Male G 3/8"F5T165430 165430 Male G 1/2"F


Connectable with Atlas Copco's QIC 10 fittings.

5T1625KAAK13S 1625KAAK13SPN Female G 1/4"M5T1625KAAK17S 1625KAAK17SPN Female G 3/8"M5T1625KAAK21S 1625KAAK21SPN Female G 1/2"M

5T1625KAIW13S 1625KAIW13SPN Female G 1/4"F5T1625KAIW17S 1625KAIW17SPN Female G 3/8"F5T1625KAIW21S 1625KAIW21SPN Female G 1/2"F

5T1625KATF06S 1625KATF06SPN Female Hose 1/4"5T1625KATF08S 1625KATF08SPN Female Hose 5/16"5T1625KATF10S 1625KATF10SPN Female Hose 3/8"5T1625KATF13S 1625KATF13SPN Female Hose 1/2"

All fittings with non-return valve are connectable with the 1600 series.


PRODUCT GROUP 523




PN = 3 MPa


PN = 3 MPa

Part number Tema descr. Type Connection

5T1750D 1750D Female R 1/4"M5T1750A 1750A Female R 3/8"M5T1750C 1750C Female R 1/2"M

5T1750B 1750B Female G 1/4"F5T1750 1750 Female G 3/8"F5T1750F 1750F Female G 1/2"F

5T1750K08 1750K08 Female Hose 8 mm5T1750K10 1750K10 Female Hose 10 mm5T1750K12 1750K12 Female Hose 12 mm5T1750K16 1750K16 Female Hose 16 mm5T1750K19 1750K19 Female Hose 19 mm

5T175110 175110 Male R 1/4"M5T175210 175210 Male R 3/8"M5T175220 175220 Male R 1/2"M

5T175410 175410 Male G 1/4"F5T175420 175420 Male G 3/3"F5T175430 175430 Male G 1/2"F


Connectable with Atlas Copco's QIC 15 fittings.

PRODUCT GROUP 523PRODUCT GROUP 523


5T1700 1700 Female NBR G 3/8"F5T1700A 1700A Female NBR R 1/2"M5T1700B 1700B Female NBR G 1/2"F5T1700C 1700C Female NBR G 3/4"F5T1700D 1700D Female NBR R 3/8"M5T1700F 1700F Female NBR R 3/4"M5T1700K10 1700K10 Female NBR Hose 10 mm5T1700K12 1700K12 Female NBR Hose 12 mm5T1700K16 1700K16 Female NBR Hose 16 mm5T1700K19 1700K19 Female NBR Hose 19 mm

5T17110 17110 Male R 1/4"M 5T17210 17210 Male R 3/8"M5T17220 17220 Male R 1/2"M5T17410 17410 Male G 3/8"F5T17420 17420 Male G 1/2"F5T17008 17008 Male Hose 8 mm5T17010 17010 Male Hose 10 mm5T17012 17012 Male Hose 12 mm5T17016 17016 Male Hose 16 mm5T17019 17019 Male Hose 19 mm

5T5026 5026 Safety plug5T2526 2526 Protection cover

Connectable with Cejn 410.



5:20

TEMA 1800/1800ECOMPRESSED AiR fiTTiNGS

Bore: 10.4 mm PN = 3 MPa E = One-handed S = Safety nipple


Bore: 10.4 mm PN = 3 MPa E = One-handed S = Steel M = Brass

TEMA 1800HHiGH PRESSURE wATERBore: 10.4 mm PN = 3 MPa

E = One-handed S = Steel M = Brass

Part number Tema descr. Type Seal Connection Part number Tema descr. Type Seal Connection


5T1800 1800 Female NBR G 3/8"F5T1800EP 1800EP Female EPDM G 3/8"F5T1800A 1800A Female NBR G 1/2"M5T1800B 1800B Female NBR G 1/2"F5T1800C 1800C Female NBR G 3/4"F

5T1800V 1800V Female Viton G 3/8"F5T1800BV 1800BV Female Viton G 1/2"F5T1800AV 1800AV Female Viton G 1/2"M5T1800E 1800E Female NBR G 3/8"F5T1800EA 1800EA Female NBR R 1/2"M5T1800EB 1800EB Female NBR G 1/2"F

5T1800EC 1800EC Female NBR G 3/4"F5T1800ED 1800ED Female NBR R 3/8"M5T1800EF 1800EF Female NBR R 3/4"M

5T1800EK10 1800EK10 Female NBR Hose 10 mm5T1800EK12 1800EK12 Female NBR Hose 12 mm5T1800EK16 1800EK16 Female NBR Hose 16 mm5T1800EK19 1800EK19 Female NBR Hose 19 mm

5T18105 18105 Male R 1/8"M5T18110 18110 Male G 1/4"M5T18110A 18110A Male R 1/4"M5T18210 18210 Male G 3/8"M5T18220 18220 Male R 1/2"M5T18230 18230 Male R 3/4"M


5T18006 18006 Male Hose 6 mm5T18008 18008 Male Hose 8 mm5T18010 18010 Male Hose 10 mm5T18012 18012 Male Hose 12 mm5T18016 18016 Male Hose 16 mm5T18019 18019 Male Hose 19 mm

5T18410S 18410S Male G 3/8"F

5T5026 5026 Safety plug5T2526 2526 Cover, male

5T18310N 18310N Seal NBR5T18310V 18310V Seal Viton5T18310EP 18310EP Seal EPDM

5TN7100 N7-10.0 Seal NBR (one-handed)

NB! The 1800/1800E series is not connectable with the 1800N series.

5T1800N 1800N Female NBR G 3/8"F5T1800NA 1800NA Female NBR G 1/2"M5T1800NB 1800NB Female NBR G 1/2"F5T1800NBA 1800NBA Female EPDM G 1/2"F5T1800NC 1800NC Female NBR G 3/4"F

5T1800NV 1800NV Female Viton G 3/8"F5T1800NAV 1800NAV Female Viton G 1/2"M5T1800NBV 1800NBV Female Viton G 1/2"F5T1800NCV 1800NCV Female Viton G 3/4"M

5T18410MN 18410MN Male NBR G 3/8"F5T18410STN 18410STN Male NBR G 3/8"F5T18430MN 18430MN Male NBR G 3/4"F5T18410MNV 18410MNV Male Viton G 3/8"F5T18410STV 18410STV Male Viton G 3/8"F

5T5026 5026 Safety plug5T2526 2526 Cover, male5T18310N 18310N O-ring, NBR5T18310V 18310V O-ring, Viton

NB! The 1800N series is not connectable with the 1800/1800E series.

5T1800H 1800H Female NBR G 3/8"F5T1800HEP 1800HEP Female EPDM G 3/8"F5T1800HV 1800HV Female Viton G 3/8"F

5T18105 18105 Male R 1/8"M5T18110 18110 Male G 1/4"M5T18110A 18110A Male R 1/4"M5T18210 18210 Male G 3/8"M5T18210A 18210A Male R 3/8"M5T18220 18220 Male R 1/2"M5T18230 18230 Male R 3/4"M


5T18310N 18310N Seal, NBR5T18310V 18310V Seal, Viton5T18310EP 18310EP Seal, EPDM


PRODUCT GROUP 523




PN = 2 MPa

5C10 320CEJN SERiES 320

Bore: 7.4mm PN = 3.5 MPa

5C10 320CEJN SERiES 320 SAfETY fiTTiNG

5552bLOw GUN

Connection = G 1/4" F

TEMAHOSE NiPPLE


PRODUCT GROUP 524PRODUCT GROUP 523

PRODUCT GROUP 523

Part number Tema descr. Type Connection Part number Cejn descr. Type Connection

Part number Cejn descr. Type ConnectionPart number Description

5T2100 2100 Female G 1"inv5T2119 2119 G 1" F Hose 19 mm5T2125 2125 G 1" F Hose 25 mm5T2132 2132 G 1" F Hose 32 mm5T21019 21019 Male Hose 19 mmT21025 21025 Male Hose 25 mm5T21032 21032 Male Hose 32 mm5T21210 21210 Male G 1"M5T21310N 21310N O-ring Nitrile

5C10 320 1002 10 320 1002 Female Hose 6 mm5C10 320 1003 10 320 1003 Female Hose 8 mm5C10 320 1004 10 320 1004 Female Hose 10 mm5C10 320 1005 10 320 1005 Female Hose 13 mm

5C10 320 1152 10 320 1152 Female R 1/4"M5C10 320 1154 10 320 1154 Female R 3/8"M5C10 320 1155 10 320 1155 Female R 1/2"M

5C10 320 1202 10 320 1202 Female G 1/4"F5C10 320 1204 10 320 1204 Female G 3/8"F5C10 320 1205 10 320 1205 Female G 1/2"F

5C10 320 5001 10 320 5001 Male Hose 4 mm5C10 320 5002 10 320 5002 Male Hose 6 mm5C10 320 5003 10 320 5003 Male Hose 8 mm5C10 320 5004 10 320 5004 Male Hose 10 mm5C10 320 5005 10 320 5005 Male Hose 13 mm

5C10 320 5151 10 320 5151 Male R 1/8"M5C10 320 5152 10 320 5152 Male R 1/4"M5C10 320 5154 10 320 5154 Male R 3/8"M5C10 320 5155 10 320 5155 Male R 1/2"M

5C10 320 5201 10 320 5201 Male G 1/8"F5C10 320 5202 10 320 5202 Male G 1/4"F5C10 320 5204 10 320 5204 Male G 3/8"F5C10 320 5205 10 320 5205 Male G 1/2"F

5C10 320 8002 10 320 8002 Nipple cover Hose 1/4" 5C10 320 8003 10 320 8003 Nipple cover Hose 5/16"5C10 320 8004 10 320 8004 Nipple cover Hose 3/8"5C10 320 8005 10 320 8005 Nipple cover Hose 1/2"



5C10 320 3002 10 320 3002 Female Hose 6 mm5C10 320 3003 10 320 3003 Female Hose 8 mm5C10 320 3004 10 320 3004 Female Hose 10 mm5C10 320 3005 10 320 3005 Female Hose 13 mm

5552-00-20 Blow gun

Part number Tema descr. Type Hose ID Connection

5T1105 1105 Hose nipple 5 mm G 1/8"M 5T1106 1106 Hose nipple 6 mm G 1/8"M 5T1306 1306 Hose nipple 6 mm G 1/4"M 5T1308 1308 Hose nipple 8 mm G 1/4"M 5T1310 1310 Hose nipple 10 mm G 1/4"M

5T1312 1312 Hose nipple 12 mm G 1/4"M 5T1806 1806 Hose nipple 6 mm G 3/8"M 5T1808 1808 Hose nipple 8 mm G 3/8"M 5T1810 1810 Hose nipple 10 mm G 3/8"M 5T1812 1812 Hose nipple 12 mm G 3/8"M

5T1816 1816 Hose nipple 16 mm G 3/8"M 5T1819 1819 Hose nipple 19 mm G 3/8"M

5552SPiRAL HOSE

Polyurethane

PRODUCT GROUP 523

Part number Dimension Work length Thread

5552-00-01 6.5 x 10 mm 4 m 1/4"M5552-00-02 8.0 x 12 mm 6 m 3/8"M



5:20

5C10 410CEJN SERiES 410

Compressed air fittings

5C10 410CEJN SERiES 410 SAfETY fiTTiNG

PRODUCT GROUP 524

PRODUCT GROUP 524

Part number Cejn descr. Type Connection

Part number Cejn descr. Type Connection

5C10 410 1003 10 410 1003 Female Hose 8 mm5C10 410 1004 10 410 1004 Female Hose 10 mm5C10 410 1005 10 410 1005 Female Hose 13 mm5C10 410 1006 10 410 1006 Female Hose 16 mm5C10 410 1007 10 410 1007 Female Hose 19 mm



5C10 410 5002 10 410 5002 Male Hose 6 mm5C10 410 5003 10 410 5003 Male Hose 8 mm5C10 410 5004 10 410 5004 Male Hose 10 mm5C10 410 5005 10 410 5005 Male Hose 13 mm5C10 410 5006 10 410 5006 Male Hose 16 mm5C10 410 5007 10 410 5007 Male Hose 19 mm

5C10 410 5152 10 410 5152 Male R 1/4"M5C10 410 5154 10 410 5154 Male R 3/8"M5C10 410 5155 10 410 5155 Male R 1/2"M5C10 410 5157 10 410 5157 Male R 3/4"M

5C10 410 5202 10 410 5202 Male G 1/4"F5C10 410 5204 10 410 5204 Male G 3/8"F5C10 410 5205 10 410 5205 Male G 1/2"F5C10 410 5207 10 410 5207 Male G 3/4"F

5C10 410 8004 10 410 8004 Nipple cover Hose3/8"5C10 410 8005 10 410 8005 Nipple cover Hose 1/2"5C10 410 8006 10 410 8006 Nipple cover Hose 5/8"5C10 410 8007 10 410 8007 Nipple cover Hose 3/4"

5C10 410 3155 10 410 3155 Female R1/2"M5C10 410 3157 10 410 3157 Female R 3/4"M

5C10 410 3204 10 410 3204 Female R 3/8"F5C10 410 3205 10 410 3205 Female R 1/2"F

5C10 410 3005 10 410 3005 Female Hose 13 mm5C10 410 3006 10 410 3006 Female Hose 16 mm5C10 410 3007 10 410 3007 Female Hose 19 mm



Part number Thread 1 Type Thread 2 Flow Rotation Rotation Part number Thread1 Thread2 l/m PN/MPa turns/min

Part number Thread 1 Type Thread 2 PN/MPa

Part number Thread 1 Type Thread 2 PN/MPa

5T250 G 3/8" FS Swivel 250 G 1/4" F5T500 G 3/4" FS Swivel 500 G 1/2" F5T750 G 1" FS Swivel 750 G 3/4" F5T1000 G 1 1/4" FS Swivel 1000 G 1" F

5576-01-04 G 1/4"F G 1/4"M 25 20.0 2125576-01-06 G 3/8"F G 3/8" M 35 20.0 1735576-01-08 G 1/2" F G 1/2" M 60 15.0 1605576-01-12 G 3/4" F G 3/4" M 100 15.0 1205576-01-16 G 1" F G 1" M 180 10.0 1005576-01-20 G 1 1/4" F G 1 1/4" M 200 10.0 865576-01-24 G 1 1/2" F G 1 1/2" M 250 8.0 73

5590-08-08 G 1/2" M Swivel G 1/2" M 35.05590-12-12 G 3/4" M Swivel G 3/4" M 35.0

5591-04-04 G 1/4"M Swivel G 1/4" F 40.05591-06-06 G 3/8"M Swivel G 3/8" F 36.55591-08-08 G 1/2"M Swivel G 1/2" F 35.05591-12-12 G 3/4"M Swivel G 3/4" F 35.05591-16-16 G 1"M Swivel G 1" F 35.05591-20-20 G 1 1/4"M Swivel G 1 1/4" F 32.05591-24-24 G 1 1/2"M Swivel G 1 1/2" F 30.0

5555TEMA SwivEL JOiNT

Brass design. Axle made of hardened steel. PN = 25 MPa

5576-01SwivEL,

STRAiGHT, G-THREADED

5590HiGH PRESSURE SwivEL, M – M

Material: Steel/zinc-plated. Seal: Nitrile. Working temperature: -40°C – +110°C

5591HiGH PRESSURE SwivEL, M – f

Material: Steel/zinc-plated. Seal: Nitrile. Working temperature: -40°C – +110°C


PRODUCT GROUP 520

PRODUCT GROUP 520

Flow Rotation Rotation Part number Thread1 Thread2 l/m PN/MPa turns/min

5577-01-04 G 1/4" F G 1/4"M 25 20.0 2125577-01-06 G 3/8" F G 3/8" M 35 20.0 1735577-01-08 G 1/2" F G 1/2" M 60 15.0 1605577-01-12 G 3/4" F G 3/4" M 100 15.0 1205577-01-16 G 1" F G 1" M 180 10.0 1005577-01-20 G 1 1/4" F G 1 1/4" M 200 10.0 865577-01-24 G 1 1/2" F G 1 1/2" M 250 8.0 73

5577-01SwivEL,

ELbOw 90°, G-THREADED

PRODUCT GROUP 520



5:20

5TTATEMA DECOMPRESSiON vALvE

For assembling in hydraulic systems in order to remove static pressure.

5558-76bACk vALvE f/f

Opening pressure 0.35 Bar

5558-68fASTER vf bURST vALvE

According to ISO 5676.

5554HOSE bRAkE vALvE

PN = 35 MPa Material: Steel/zinc plated Seal: Nitrile

Dim. Tema Thread1 Type Thread2 PN MPa Dim. Part number Thread PN MPa

Part number. Description PN MPa Flow

3/8" 5TTA38 G 3/8" M TA 38 G 3/8" F 28.0 1/2" 5TTA50 G 1/2" M TA 50 G 1/2" F 25.0 3/4" 5TTA75 G 3/4" M TA 75 G 3/4" F 20.0 1" 5TTA100 G 1" M TA 100 G 1" F 15.0

1/4" 5558-76-04 G 1/4" F 40.0 3/8" 5558-76-06 G 3/8" F 35.0 1/2" 5558-76-08 G 1/2" F 30.0 3/4" 5558-76-12 G 3/4" F 25.0 1" 5558-76-16 G 1" F 25.0

Female 5551-18-06 G 3/8" F 22.0 40 l/m5558-69-08 G 1/2" F 22.0 40 l/m5558-68-25 M18 x 1.5 (12L) M Bulkhead 22.0 40 l/m5558-69-55 Protection for female part (included)

Male5558-68-08 G 1/2" M 22.0 40 l/m5558-68-51 M18 x 1.5 (12L) M Bulkhead 22.0 40 l/m5558-60-55 Protection for male part (green)


PRODUCT GROUP 520

PRODUCT GROUP 520

5558-77bACk vALvE M/M

Opening pressure 0.35 Bar

Dim. Part number Thread PN MPa

1/4" 5558-77-04 G 1/4" M 40.0 3/8" 5558-77-06 G 3/8" M 35.0 1/2" 5558-77-08 G 1/2" M 30.0

PRODUCT GROUP 520

For more back valves, see chapter 6.

Other dimensions on request.

DimensionFlow

G 1/4"Part numer

G 3/8"Part number

G 1/2"Part number

G 3/4"Part number

10 5554-10-04

15 5554-15-06

25 5554-25-06

30 5554-30-08

35 5554-35-06

40 5554-40-06

50 5554-50-08

60 5554-60-08 5554-60-12

80 5554-80-12

100 5554-90-12

120 5554-91-12

NEw LifE TO YOUR OLD HOSE!

Bring your old and used hydraul hose to Hydroscand and we will make sure that it will get a new life.

We start by removing any remaining oil. The oil is then cleaned and reused. The fitting is cut off and sent to metal

recycling. The hose it self is also taken care of and recycled into new raw material for energy.

Contact your nearest HYDROSCAND representative for more information.


5:70

5302 Complete clamp Polypropylene 2245322 Complete clamp Aluminium 2245303 Complete clamp Polypropylene 2255323 Complete clamp Aluminium 2255390-0 Clamps Polypropylene 2265390-6 Clamps Polyamide, self-extingushing 2265390-2 Clamps Aluminium 2275390-09 Clamps for twin hose 2275390-5 Clamps Vibration absorber for rubber grommet 2275393-5 Rubber grommet for 5390-5 2275391-0 Normal weld plate 2285391-1 Weld plate Long 2285391-2 Double weld plate 2285391-3 Inline weld plate 2285393 Wear rail with accessories 2295391-7 Sectional plate 2295392-0 Cap head bolt for washer 2295392-3 Hexagon bolt for sectional plate 2295392-2 Stacking bolt 229

5315 Complete clamp Polypropylene 2305335 Complete clamp Aluminium 2305316 Complete clamp Polypropylene 2315336 Complete clamp Aluminium 2315390-1 Clamps Polypropylene 2325390-3 Clamps Aluminium 2325355 U-clamps 2325391-8 Simple sectional plate 2335391-4 Simple weld plate 2335392-6 Stacking bolt 2335393-0 Tube washer for stacking bolt 2335391-5 Double sectional plate 2335391-5 Double weld plate 2335392-4 Hexagon bolt 233

5342 Complete double clamp 2345343 Complete double clamp 2345390-4 Double clamp Polypropylene 2345390-4C Double clamp Polypropylene, self-extingushing 2345394-0 Weld plate 2355392-5 Bolt for washer 2355392-5 Bolt for sectional plate 2355393-0 Washer 2355394-1 Sectional plate 235

5360 Clamp Polypropylene 2355360 Clamp Polypropylene 235

HYDROSCAND PiPE CLAmPS

PiPE CLAPmS PRODUCT GROUP 570

Hydroscand’s pipe clamps are designed as attaching elements for pipes and hoses. Using a Hydroscand clamp when assembling pipes and pipe groups, as well as industrial and hydraulic hoses, and general pipe installations, makes the assembling quick and efficient.Hydroscand’s pipe clamps are made of polypropylene, aluminium, glass fibre reinforced polyamide (flame proofed) and polypropylene with rubber grommet. Weld and sectional plates, screws etc. are available in steel or in stainless steel.For systems with a lot of vibration, the recommended material is polypropylene with rubber grommet. This is also suitable for attaching electrical cables.

HYDROSCAND DELivERY PROGRAmmE

Standard series Used for normal hydraulic and pipe diameter of 6–54 mm, male. Clamp material: Polypropylene, aluminium, glass fibre reinforced polyamide and polypropylene with rubber grommet. Note! Clamps for inch-pipes are also available.

Heavy series Used for high pressure hydraulics and pipe diameter of 8–324 mm, male. Clamp material: Polypropylene, aluminium, glass fibre reinforced polyamide and polypropylene with rubber grommet.

Low weight seriesUsed for all types of installations and pipe diameter of 4–22 mm, male. Clamp material: Polypropylene.

Double clampsUsed for normal hydraulics and pipe diameter of 6–42 mm, male. Clamp material: Polypropylene and glass fibre reinforced polyamide.

Weld and sectional platesAre available in untreated design. Price and delivery on request.

For recommended distance between pipe clamps, see chapter 11.


TAbLE Of CONTENTS

STANDARD SERiES PAGE

HEAvY SERiES PAGE

DOUbLE SERiES PAGE

LOW WEiGHT SERiES PAGE

material characteristics Polypropylene Aluminium PolyamideMechanical characteristicsTear proof DIN 53455 35N/mm2 170-200 N/mm2 160 N/mm2

Bending strength DIN 53452 43 N/mm2 70 N/mm2 230 N/mm2

Impact strength DIN 53453 11 KJ/m2 40 KJ/m2

Compression strength ASTM D695 12.000 N/mm2 HB 500-600 N/mm2 160 N/mm2

Technical characteristicsTemperature area -30° – +90°C to +400°C -40° – +180°CElectrical characteristicsSpecific resistance DIN 53482 1018 Ohm x cm 1015 Ohm x cmCreeping current resistance DIN 53480 KA3C–KB>660–KC>600 KA3B–KB450–KC450We reserve the right to make constructional changes.

HYDROSCAND PiPE CLAmPS PRODUCT GROUP 570


5302COmPLETE CLAmP POLYPROPYLENE

Standard series

5322COmPLETE CLAmP

ALUmiNiUm

Standard series

Part number Descr. Group No. bolts Pipe Ø Part number Descr. Group No. bolts Pipe Ø

5302-01-06 SPP 1 1 6 mm5302-01-08 SPP 1 1 8 mm5302-01-10 SPP 1 1 10 mm5302-01-12 SPP 1 1 12 mm5302-02-06 SPP 2 2 6 mm5302-02-08 SPP 2 2 8 mm5302-02-10 SPP 2 2 10 mm5302-02-12 SPP 2 2 12 mm5302-03-14 SPP 3 2 14 mm5302-03-15 SPP 3 2 15 mm5302-03-16 SPP 3 2 16 mm5302-03-18 SPP 3 2 18 mm5302-04-20 SPP 4 2 20 mm5302-04-22 SPP 4 2 22 mm5302-04-23 SPP 4 2 23 mm5302-04-25 SPP 4 2 25 mm5302-05-28 SPP 5 2 28 mm5302-05-30 SPP 5 2 30 mm5302-05-32 SPP 5 2 32 mm5302-06-35 SPP 6 2 35 mm5302-06-38 SPP 6 2 38 mm5302-06-40 SPP 6 2 40 mm5302-06-42 SPP 6 2 42 mm5302-06-45 SPP 6 2 45 mm5302-07-45 SPP 7 2 45 mm5302-07-48 SPP 7 2 48 mm5302-07-50 SPP 7 2 50 mm5302-07-54 SPP 7 2 54 mm

The complete standard clamp series consisting of clamp halves (PLK), welding plate (SP), socket head cap screw (IS) and washer.

5322-02-06 SPA 2 2 6 mm5322-02-08 SPA 2 2 8 mm5322-02-10 SPA 2 2 10 mm5322-02-12 SPA 2 2 12 mm5322-03-14 SPA 3 2 14 mm5322-03-15 SPA 3 2 15 mm5322-03-16 SPA 3 2 16 mm5322-03-18 SPA 3 2 18 mm5322-04-20 SPA 4 2 20 mm5322-04-22 SPA 4 2 22 mm5322-04-23 SPA 4 2 23 mm5322-04-25 SPA 4 2 25 mm5322-05-28 SPA 5 2 28 mm5322-05-30 SPA 5 2 30 mm5322-05-32 SPA 5 2 32 mm5322-06-35 SPA 6 2 35 mm5322-06-38 SPA 6 2 38 mm5322-06-40 SPA 6 2 40 mm5322-06-42 SPA 6 2 42 mm5322-06-45 SPA 6 2 45 mm

The complete standard clamp series consisting of clamp halves (ALK), welding plate (SP), socket head cap screw (IS) and washer.

PRODUCT GROUP 570 HYDROSCAND PiPE CLAmPS


5:70

5323COmPLETE CLAmP

ALUmiNiUm

Standard series


Standard series

Part number Descr. Group No. bolts Pipe ØPart number Descr. Group No. bolts Pipe Ø

5323-02-06 SPA-TP 2 2 6 mm5323-02-08 SPA-TP 2 2 8 mm5323-02-10 SPA-TP 2 2 10 mm5323-02-12 SPA-TP 2 2 12 mm5323-03-14 SPA-TP 3 2 14 mm5323-03-15 SPA-TP 3 2 15 mm5323-03-16 SPA-TP 3 2 16 mm5323-03-18 SPA-TP 3 2 18 mm5323-04-20 SPA-TP 4 2 20 mm5323-04-22 SPA-TP 4 2 22 mm5323-04-23 SPA-TP 4 2 23 mm5323-04-25 SPA-TP 4 2 25 mm5323-05-28 SPA-TP 5 2 28 mm5323-05-30 SPA-TP 5 2 30 mm5323-05-32 SPA-TP 5 2 32 mm5323-06-35 SPA-TP 6 2 35 mm5323-06-38 SPA-TP 6 2 38 mm5323-06-40 SPA-TP 6 2 40 mm5323-06-42 SPA-TP 6 2 42 mm5323-06-45 SPA-TP 6 2 45 mm

Den complete standard clamp series consisting of clamp halves (ALK), welding plate (SP), sectional plate (TP) and hexagon bolt.

5303-01-06 SPP-TP 1 1 6 mm5303-01-08 SPP-TP 1 1 8 mm5303-01-10 SPP-TP 1 1 10 mm5303-01-12 SPP-TP 1 1 12 mm5303-02-06 SPP-TP 2 2 6 mm5303-02-08 SPP-TP 2 2 8 mm5303-02-10 SPP-TP 2 2 10 mm5303-02-12 SPP-TP 2 2 12 mm5303-03-14 SPP-TP 3 2 14 mm5303-03-15 SPP-TP 3 2 15 mm5303-03-16 SPP-TP 3 2 16 mm5303-03-18 SPP-TP 3 2 18 mm5303-04-20 SPP-TP 4 2 20 mm5303-04-22 SPP-TP 4 2 22 mm5303-04-23 SPP-TP 4 2 23 mm5303-04-25 SPP-TP 4 2 25 mm5303-05-28 SPP-TP 5 2 28 mm5303-05-30 SPP-TP 5 2 30 mm5303-05-32 SPP-TP 5 2 32 mm5303-06-35 SPP-TP 6 2 35 mm5303-06-38 SPP-TP 6 2 38 mm5303-06-40 SPP-TP 6 2 40 mm5303-06-42 SPP-TP 6 2 42 mm5303-06-45 SPP-TP 6 2 45 mm5303-07-45 SPP-TP 7 2 45 mm5303-07-48 SPP-TP 7 2 48 mm5303-07-50 SPP-TP 7 2 50 mm5303-07-54 SPP-TP 7 2 54 mm

The complete standard clamp series consisting of clamp halves (PLK), welding plate (SP), sectional plate (TP) and hexagon bolt.



5390-0CLAmPS

POLYPROPYLENE

Standard series

Part number Descr. Group No. bolts Pipe Ø

5390-01-06 PLK 1 1 6.0 mm5390-01-08 PLK 1 1 8.0 mm5390-01-10 PLK 1 1 10.0 mm5390-01-12 PLK 1 1 12.0 mm5390-02-06 PLK 2 2 6.0 mm5390-02-08 PLK 2 2 8.0 mm5390-02-10 PLK 2 2 10.0 mm5390-02-12 PLK 2 2 12.0 mm5390-03-006 PLK 3 2 (3/8") 17.2 mm5390-03-14 PLK 3 2 14.0 mm5390-03-15 PLK 3 2 15.0 mm5390-03-16 PLK 3 2 16.0 mm5390-03-18 PLK 3 2 18.0 mm5390-04-008 PLK 4 2 (1/2") 21.3 mm5390-04-19 PLK 4 2 19.0 mm5390-04-20 PLK 4 2 20.0 mm5390-04-22 PLK 4 2 22.0 mm5390-04-23 PLK 4 2 23.0 mm5390-04-25 PLK 4 2 25.0 mm5390-05-012 PLK 5 2 (3/4") 26.9 mm5390-05-28 PLK 5 2 28.0 mm5390-05-30 PLK 5 2 30.0 mm5390-05-32 PLK 5 2 32.0 mm5390-06-016 PLK 6 2 (1") 33.7 mm5390-06-32 PLK 6 2 32.0 mm5390-06-35 PLK 6 2 35.0 mm5390-06-38 PLK 6 2 38.0 mm5390-06-40 PLK 6 2 40.0 mm5390-06-42 PLK 6 2 42.0 mm5390-06-45 PLK 6 2 45.0 mm5390-07-45 PLK 7 2 45.0 mm5390-07-48 PLK 7 2 48.0 mm5390-07-50 PLK 7 2 50.0 mm5390-07-54 PLK 7 2 54.0 mm

5390-6CLAmPS

POLYAmiDE, SELf-ExTiNGUSHiNG

Standard series


5390-61-06 PLK 1 1 6 mm5390-61-08 PLK 1 1 8 mm5390-61-10 PLK 1 1 10 mm5390-61-12 PLK 1 1 12 mm5390-62-06 PLK 2 2 6 mm5390-62-08 PLK 2 2 8 mm5390-62-10 PLK 2 2 10 mm5390-62-12 PLK 2 2 12 mm5390-63-14 PLK 3 2 14 mm5390-63-15 PLK 3 2 15 mm5390-63-16 PLK 3 2 16 mm5390-63-18 PLK 3 2 18 mm5390-64-20 PLK 4 2 20 mm5390-64-22 PLK 4 2 22 mm5390-64-23 PLK 4 2 23 mm5390-64-25 PLK 4 2 25 mm5390-65-28 PLK 5 2 28 mm5390-65-30 PLK 5 2 30 mm5390-65-32 PLK 5 2 32 mm5390-66-32 PLK 6 2 32 mm5390-66-35 PLK 6 2 35 mm5390-66-38 PLK 6 2 38 mm5390-66-40 PLK 6 2 40 mm5390-66-42 PLK 6 2 42 mm5390-67-45 PLK 7 2 45 mm5390-67-48 PLK 7 2 48 mm5390-67-50 PLK 7 2 50 mm5390-67-54 PLK 7 2 54 mm



5:70

5390-2CLAmPS

ALUmiNiUm

Standard series

5390-09CLAmPS

fOR TWiN HOSE

Standard series

5393-5RUbbER GROmmET

fOR 5390-5

Standard series

5390-5CLAmPS

vibRATiON AbSORbER fOR RUbbER GROmmET

Standard series


5390-22-004 ALK 2 2 (1/4") 6.4 mm5390-22-06 ALK 2 2 6.0 mm5390-22-08 ALK 2 2 8.0 mm5390-22-10 ALK 2 2 10.0 mm5390-22-12 ALK 2 2 12.0 mm5390-23-14 ALK 3 2 14.0 mm5390-23-15 ALK 3 2 15.0 mm5390-23-16 ALK 3 2 16.0 mm5390-23-18 ALK 3 2 18.0 mm5390-24-008 ALK 4 2 (1/2") 21.3 mm5390-24-20 ALK 4 2 20.0 mm5390-24-22 ALK 4 2 22.0 mm5390-24-23 ALK 4 2 23.0 mm5390-24-25 ALK 4 2 25.0 mm5390-25-012 ALK 5 2 (3/4") 26.9 mm5390-25-28 ALK 5 2 28.0 mm5390-25-30 ALK 5 2 30.0 mm5390-25-32 ALK 5 2 32.0 mm5390-26-016 ALK 6 2 (1") 33.7 mm5390-26-35 ALK 6 2 35.0 mm5390-26-38 ALK 6 2 38.0 mm5390-26-40 ALK 6 2 40.0 mm5390-26-42 ALK 6 2 (1 1/4") 42.4 mm5390-26-45 ALK 6 2 45.0 mm5390-27-48 ALK 7 2 (1 1/2") 48.3 mm

Part number Descr. Group Hose OD

Part number Descr. Group Pipe Ø

Part number Descr. Group

5390-09-12 PLTVK 4 12 mm5390-09-14 PLTVK 5 14 mm5390-09-16 PLTVK 5 16 mm5390-09-20 PLTVK 6 20 mm

5393-54-06 Grommet 4 6.00 mm5393-54-08 Grommet 4 8.00 mm5393-54-10 Grommet 4 10.00 mm5393-54-12 Grommet 4 12.00 mm5393-54-15 Grommet 4 15.00 mm5393-54-16 Grommet 4 16.00 mm5393-54-18 Grommet 4 18.00 mm5393-56-08 Grommet 6 8.00 mm5393-56-10 Grommet 6 10.00 mm5393-56-12 Grommet 6 12.00 mm5393-56-15 Grommet 6 15.00 mm5393-56-16 Grommet 6 16.00 mm5393-56-18 Grommet 6 18.00 mm5393-56-20 Grommet 6 20.00 mm5393-56-22 Grommet 6 22.00 mm5393-56-25 Grommet 6 25.00 mm5393-56-28 Grommet 6 28.00 mm5393-57-28 Grommet 7 28.00 mm5393-57-30 Grommet 7 30.00 mm5393-57-35 Grommet 7 35.00 mm5393-57-38 Grommet 7 38.00 mm5393-57-42 Grommet 7 (1 1/4") 42.40 mm5393-57-50 Grommet 7 (1 1/2") 48.25 mm

5390-54-00 PGLK 45390-56-00 PGLK 65390-57-00 PGLK 7



5391-0NORmAL WELD PLATE

Standard series

5391-2DOUbLE WELD PLATE

Standard series

5391-3iNLiNE WELD PLATE

Standard series

5391-1WELD PLATE

LONG

Standard series



5391-01-01 SP 15391-02-01 SP 25391-03-01 SP 35391-04-01 SP 45391-05-01 SP 55391-06-01 SP 65391-07-01 SP 75391-08-01 SP 8


5391-22-02 SPD 25391-23-02 SPD 35391-24-02 SPD 45391-25-02 SPD 55391-26-02 SPD 6

5391-11-01 SP Long 15391-12-01 SP Long 25391-13-01 SP Long 35391-14-01 SP Long 45391-15-01 SP Long 55391-16-01 SP Long 65391-17-01 SP Long 7

Part number Descr. Group No. clamps

5391-31-10 RSP 1 105391-32-10 RSP 2 105391-33-10 RSP 3 105391-34-10 RSP 4 105391-35-05 RSP 5 55391-36-05 RSP 6 5



5:70

5393WEAR RAiL

WiTH ACCESSORiES

Standard series

5391-7SECTiONAL PLATE

Standard series

5392-0CAP HEAD bOLT

fOR WASHER

Standard series

5392-3HExAGON bOLT

fOR SECTiONAL PLATE

Standard series

5392-2STACkiNG bOLT

Standard series


5393-00-05 Wear rail, 2 meter 14x28 mm5393-00-02 Mounting nut M65393-00-03 O-ring for FM5393-10-05 Wear rail for, 2 meter 40x22 mm5393-10-03 O-ring for FM T5393-10-08 Mounting nut M85393-10-10 Mounting nut M105393-10-12 Mounting nut M12


Part number Descr. Thread Length Group



5391-71-01 TP 15391-72-01 TP 25391-73-01 TP 35391-74-01 TP 45391-75-01 TP 55391-76-01 TP 65391-77-01 TP 75391-78-01 TP 8

5392-01-22 IS M6 22 1 & 25392-03-28 IS M6 28 35392-04-30 IS M6 30 45392-05-40 IS M6 40 55392-06-50 IS M6 50 65392-07-60 IS M6 60 75393-00-01 Washer M6

5392-31-30 SKB M6 30 1 & 25392-33-35 SKB M6 35 35392-34-40 SKB M6 40 45392-35-50 SKB M6 50 55392-36-60 SKB M6 60 65392-37-70 SKB M6 70 75392-38-10 SKB M6 100 8

5392-21-22 PBS M6 22 1 & 25392-23-28 PBS M6 28 35392-24-30 PBS M6 30 45392-25-40 PBS M6 40 55392-26-50 PBS M6 50 65393-00-04 Tab washer




Heavy series

5335COmPLETE CLAmP

ALUmiNiUm

Heavy series

Part number Descr. Group Pipe Ø Part number Descr. Group Pipe Ø

5315-01-08 TSPP 1 8 mm5315-01-10 TSPP 1 10 mm5315-01-12 TSPP 1 12 mm5315-01-14 TSPP 1 14 mm5315-01-15 TSPP 1 15 mm5315-01-16 TSPP 1 16 mm5315-01-18 TSPP 1 18 mm5315-01-20 TSPP 1 20 mm5315-02-22 TSPP 2 22 mm5315-02-25 TSPP 2 25 mm5315-02-28 TSPP 2 28 mm5315-02-30 TSPP 2 30 mm5315-03-30 TSPP 3 30 mm5315-03-32 TSPP 3 32 mm5315-03-33 TSPP 3 33 mm5315-03-35 TSPP 3 35 mm5315-03-36 TSPP 3 36 mm5315-03-38 TSPP 3 38 mm5315-03-40 TSPP 3 40 mm5315-03-42 TSPP 3 42 mm5315-03-45 TSPP 3 45 mm5315-04-38 TSPP 4 38 mm5315-04-40 TSPP 4 40 mm5315-04-42 TSPP 4 42 mm5315-04-45 TSPP 4 45 mm5315-04-48 TSPP 4 48 mm5315-04-50 TSPP 4 50 mm5315-04-53 TSPP 4 53 mm5315-04-56 TSPP 4 56 mm5315-04-60 TSPP 4 60 mm5315-04-63 TSPP 4 63 mm5315-04-65 TSPP 4 65 mm5315-04-70 TSPP 4 70 mm5315-05-73 TSPP 5 73 mm5315-05-80 TSPP 5 80 mm5315-05-90 TSPP 5 90 mm

Complete clamp consisting of 1 pair of clamp halves (TPLK), single welding plate (TSP), single sectional plate (TTP) and bolts (SKB).

5335-01-06 TSPA 1 6 mm5335-01-08 TSPA 1 8 mm5335-01-10 TSPA 1 10 mm5335-01-12 TSPA 1 12 mm5335-01-15 TSPA 1 15 mm5335-01-16 TSPA 1 16 mm5335-01-18 TSPA 1 18 mm5335-01-20 TSPA 1 20 mm5335-02-20 TSPA 2 20 mm5335-02-22 TSPA 2 22 mm5335-02-25 TSPA 2 25 mm5335-02-28 TSPA 2 28 mm5335-02-30 TSPA 2 30 mm5335-03-32 TSPA 3 32 mm5335-03-33 TSPA 3 33 mm5335-03-35 TSPA 3 35 mm5335-03-36 TSPA 3 36 mm5335-03-38 TSPA 3 38 mm5335-03-42 TSPA 3 42 mm5335-03-45 TSPA 3 45 mm5335-04-42 TSPA 4 42 mm5335-04-48 TSPA 4 48 mm5335-04-50 TSPA 4 50 mm5335-04-56 TSPA 4 56 mm5335-04-60 TSPA 4 60 mm5335-04-63 TSPA 4 63 mm5335-04-70 TSPA 4 70 mm5335-05-65 TSPA 5 65 mm5335-05-76 TSPA 5 76 mm5335-05-90 TSPA 5 90 mm

Complete clamp consisting of 1 pair of clamp halves (TALK), single welding plate (TSP), single sectional plate (TTP) and bolts (SKB).



5:70

5336COmPLETE CLAmP

ALUmiNiUm

Heavy series


Heavy series

Part number Descr. Group Pipe ØPart number Descr. Group Pipe Ø

5336-01-06 TSPDA 1 6 mm5336-01-08 TSPDA 1 8 mm5336-01-10 TSPDA 1 10 mm5336-01-12 TSPDA 1 12 mm5336-01-15 TSPDA 1 15 mm5336-01-16 TSPDA 1 16 mm5336-01-18 TSPDA 1 18 mm5336-01-20 TSPDA 1 20 mm5336-02-20 TSPDA 2 20 mm5336-02-22 TSPDA 2 22 mm5336-02-25 TSPDA 2 25 mm5336-02-28 TSPDA 2 28 mm5336-02-30 TSPDA 2 30 mm5336-03-32 TSPDA 3 32 mm5336-03-33 TSPDA 3 33 mm5336-03-35 TSPDA 3 35 mm5336-03-36 TSPDA 3 36 mm5336-03-38 TSPDA 3 38 mm5336-03-42 TSPDA 3 42 mm5336-03-45 TSPDA 3 45 mm5336-04-42 TSPDA 4 42 mm5336-04-48 TSPDA 4 48 mm5336-04-50 TSPDA 4 50 mm5336-04-56 TSPDA 4 56 mm5336-04-60 TSPDA 4 60 mm5336-04-63 TSPDA 4 63 mm5336-04-70 TSPDA 4 70 mm5336-05-65 TSPDA 5 65 mm5336-05-76 TSPDA 5 76 mm5336-05-90 TSPDA 5 90 mm

Complete clamp consisting of 2 pairs of clamp halves (TALK ), double welding plate (TSPD), double sectional plate (TTPD) and 4 pcs of bolts (SKB).

5316-01-08 TSPDP 1 8 mm5316-01-10 TSPDP 1 10 mm5316-01-12 TSPDP 1 12 mm5316-01-14 TSPDP 1 14 mm5316-01-15 TSPDP 1 15 mm5316-01-16 TSPDP 1 16 mm5316-01-18 TSPDP 1 18 mm5316-01-20 TSPDP 1 20 mm5316-02-22 TSPDP 2 22 mm5316-02-25 TSPDP 2 25 mm5316-02-28 TSPDP 2 28 mm5316-02-30 TSPDP 2 30 mm5316-03-32 TSPDP 3 32 mm5316-03-33 TSPDP 3 33 mm5316-03-35 TSPDP 3 35 mm5316-03-36 TSPDP 3 36 mm5316-03-38 TSPDP 3 38 mm5316-03-40 TSPDP 3 40 mm5316-03-42 TSPDP 3 42 mm 5316-03-45 TSPDP 3 45 mm5316-04-38 TSPDP 4 38 mm5316-04-40 TSPDP 4 40 mm5316-04-42 TSPDP 4 42 mm5316-04-45 TSPDP 4 45 mm5316-04-48 TSPDP 4 48 mm5316-04-50 TSPDP 4 50 mm5316-04-53 TSPDP 4 53 mm5316-04-56 TSPDP 4 56 mm5316-04-60 TSPDP 4 60 mm5316-04-63 TSPDP 4 63 mm5316-04-65 TSPDP 4 65 mm5316-04-70 TSPDP 4 70 mm5316-05-73 TSPDP 5 73 mm5316-05-80 TSPDP 5 80 mm5316-05-90 TSPDP 5 90 mm

Complete clamp consisting of 2 pairs of clamp halves (TPLK ), double welding plate (TSPD), double sectional plate (TTPD) and 4 pcs of bolts (SKB).



5390-1CLAmPS

POLYPROPYLENE

Heavy series

5390-3CLAmPS

ALUmiNiUm

Heavy series

5355U-CLAmPS

CM – Medium heavy series CP – Heavy series


Part number Descr. Pipe Ø Thread

5390-11-08 TPLK 1 8.0 mm5390-11-10 TPLK 1 10.0 mm5390-11-12 TPLK 1 12.0 mm5390-11-14 TPLK 1 14.0 mm5390-11-15 TPLK 1 15.0 mm5390-11-16 TPLK 1 16.0 mm5390-11-18 TPLK 1 18.0 mm5390-11-20 TPLK 1 20.0 mm5390-12-20 TPLK 2 20.0 mm5390-12-22 TPLK 2 22.0 mm5390-12-25 TPLK 2 25.0 mm5390-12-28 TPLK 2 28.0 mm5390-12-30 TPLK 2 30.0 mm5390-13-30 TPLK 3 30.0 mm5390-13-32 TPLK 3 32.0 mm5390-13-33 TPLK 3 (1") 33.7 mm5390-13-35 TPLK 3 35.0 mm5390-13-36 TPLK 3 36.0 mm5390-13-38 TPLK 3 38.0 mm5390-13-40 TPLK 3 40.0 mm5390-13-42 TPLK 3 (1 1/4") 42.4 mm5390-13-45 TPLK 3 45.0 mm5390-14-38 TPLK 4 38.0 mm5390-14-40 TPLK 4 40.0 mm5390-14-42 TPLK 4 42.0 mm5390-14-45 TPLK 4 45.0 mm5390-14-48 TPLK 4 48.0 mm5390-14-49 TPLK 4 (1 1/2") 48. 3 mm5390-14-50 TPLK 4 50.0 mm5390-14-53 TPLK 4 53.0 mm5390-14-54 TPLK 4 (1 3/4") 54.0 mm5390-14-56 TPLK 4 56.0 mm5390-14-57 TPLK 4 57.2 mm5390-14-60 TPLK 4 (2") 60.0 mm5390-14-63 TPLK 4 63.0 mm5390-14-65 TPLK 4 65.0 mm5390-14-70 TPLK 4 70.0 mm5390-15-73 TPLK 5 73.0 mm5390-15-76 TPLK 5 (2 1/2") 76.0 mm5390-15-80 TPLK 5 80.0 mm5390-15-88 TPLK 5 (3") 88.9 mm5390-15-90 TPLK 5 90.0 mm

5390-31-06 TALK 1 6,0 mm5390-31-08 TALK 1 8,0 mm5390-31-10 TALK 1 10,0 mm5390-31-12 TALK 1 12,0 mm5390-31-15 TALK 1 15,0 mm5390-31-16 TALK 1 16,0 mm5390-31-18 TALK 1 18,0 mm5390-31-20 TALK 1 20,0 mm5390-32-20 TALK 2 20,0 mm5390-32-22 TALK 2 22,0 mm5390-32-25 TALK 2 25,0 mm5390-32-28 TALK 2 28,0 mm5390-32-30 TALK 2 30,0 mm5390-33-32 TALK 3 32,0 mm5390-33-33 TALK 3 (1") 33,7 mm5390-33-35 TALK 3 35,0 mm5390-33-36 TALK 3 36,0 mm5390-33-38 TALK 3 38,0 mm5390-33-40 TALK 3 40,0 mm5390-33-42 TALK 3 (1 1/4") 42,4 mm5390-33-45 TALK 3 45,0 mm5390-34-48 TALK 4 (1 1/2") 48,3 mm5390-34-50 TALK 4 50,0 mm5390-34-56 TALK 4 56,0 mm5390-34-60 TALK 4 (2") 60,3 mm5390-34-63 TALK 4 63,0 mm5390-34-70 TALK 4 70,0 mm5390-35-65 TALK 5 65,0 mm5390-35-76 TALK 5 (2 1/2") 76,0 mm5390-35-90 TALK 5 90,0 mm

5355-08-08 CM 1/2" M 85355-08-12 CM 3/4" M 85355-08-16 CM 1" M 85355-10-08 CP 1/2" M 105355-10-12 CP 3/4" M 105355-10-16 CP 1" M 105355-12-24 CP 1 1/2" M 125355-12-32 CP 2" M 125355-12-40 CP 2 1/2" M 125355-12-48 CP 3" M 125355-16-64 CP 4" M 165355-16-96 CP 6" M 16



5:70

5391-4SimPLE WELD PLATE

Heavy series

5391-5DOUbLE WELD PLATE

Heavy series

5391-8SimPLE SECTiONAL PLATE

Heavy series

Part number Descr. Group Part number Descr. Group


5391-41-01 TSP 15391-42-01 TSP 25391-43-01 TSP 35391-44-01 TSP 45391-45-01 TSP 55391-46-01 TSP 65391-47-01 TSP 7

5391-51-20 TSPD 15391-52-20 TSPD 25391-53-20 TSPD 35391-54-20 TSPD 45391-55-20 TSPD 5

5391-81-01 TTP 15391-82-01 TTP 25391-83-01 TTP 35391-84-01 TTP 45391-85-01 TTP 55391-86-01 TTP 65391-87-01 TTP 7

5392-6STACkiNG bOLT

Heavy series

5392-4HExAGON bOLT

Heavy series

Part number Descr. Thread Length Group Part number Descr. Thread Length Group

5392-61-49 PBS M 10 49 mm 15392-62-60 PBS M 10 65 mm 25392-63-75 PBS M 10 75 mm 35392-64-11 PBS M 12 108 mm 45392-65-13 PBS M 16 139 mm 5

5392-41-45 SKB M 10 45 mm 15392-42-60 SKB M 10 60 mm 25392-43-75 SKB M 10 75 mm 35392-44-11 SKB M 12 100 mm 45392-45-13 SKB M 16 130 mm 55392-46-19 SKB M 20 190 mm 65392-47-22 SKB M 20 220 mm 7

5393-0TUbE WASHER fOR

STACkiNG bOLT

Heavy series


5393-00-11 SB-CP 15393-00-12 SB-CP 25393-00-13 SB-CP 35393-00-14 SB-CP 45393-00-15 SB-CP 5

5391-5DOUbLE SECTiONAL PLATE

Heavy series


5391-91-20 TTPD 15391-92-20 TTPD 25391-93-20 TTPD 35391-94-20 TTPD 45391-95-20 TTPD 5



5342COmPLETE DOUbLE CLAmP

Double series

5390-4DOUbLE CLAmP

POLYPROPYLENE

Double series

5390-4CDOUbLE CLAmP

POLYPROPYLENE, SELf-ExTiNGUSHiNG

Double series

5343COmPLETE DOUbLE CLAmP

Double series


Part number Descr. Group Pipe ØPart number Descr. Group Pipe Ø

5342-01-06 DB 1 6 mm5342-01-08 DB 1 8 mm5342-01-10 DB 1 10 mm5342-01-12 DB 1 12 mm5342-02-14 DB 2 14 mm5342-02-15 DB 2 15 mm5342-02-16 DB 2 16 mm5342-02-18 DB 2 18 mm5342-03-20 DB 3 20 mm5342-03-22 DB 3 22 mm5342-03-25 DB 3 25 mm5342-04-26 DB 4 26 mm5342-04-28 DB 4 28 mm5342-04-30 DB 4 30 mm5342-05-35 DB 5 35 mm5342-05-38 DB 5 38 mm5342-05-42 DB 5 42 mm

Complete double clamp consisting of clamp halves (DPLK), welding plate (DSP), washer (DB) and bolt (SKB).

5390-41-06 DPLK 1 6 mm5390-41-08 DPLK 1 8 mm5390-41-10 DPLK 1 10 mm5390-41-12 DPLK 1 12 mm5390-42-14 DPLK 2 14 mm5390-42-15 DPLK 2 15 mm5390-42-16 DPLK 2 16 mm5390-42-18 DPLK 2 18 mm5390-43-20 DPLK 3 20 mm5390-43-22 DPLK 3 22 mm5390-43-23 DPLK 3 23 mm5390-43-25 DPLK 3 25 mm5390-44-26 DPLK 4 26 mm5390-44-28 DPLK 4 28 mm5390-44-30 DPLK 4 30 mm5390-45-33 DPLK 5 33 mm5390-45-35 DPLK 5 35 mm5390-45-38 DPLK 5 38 mm5390-45-40 DPLK 5 40 mm5390-45-42 DPLK 5 42 mm

5390-41-06C DPLK 1 6 mm5390-41-08C DPLK 1 8 mm5390-41-10C DPLK 1 10 mm5390-41-12C DPLK 1 12 mm5390-42-14C DPLK 2 14 mm5390-42-16C DPLK 2 16 mm5390-42-18C DPLK 2 18 mm5390-43-20C DPLK 3 20 mm5390-43-22C DPLK 3 22 mm5390-43-23C DPLK 3 23 mm5390-44-26C DPLK 4 26 mm5390-44-28C DPLK 4 28 mm5390-44-30C DPLK 4 30 mm5390-45-33C DPLK 5 33 mm5390-45-35C DPLK 5 35 mm5390-45-38C DPLK 5 38 mm5390-45-40C DPLK 5 40 mm5390-45-42C DPLK 5 42 mm

5343-01-06 DSP 1 6 mm5343-01-08 DSP 1 8 mm5343-01-10 DSP 1 10 mm5343-01-12 DSP 1 12 mm5343-02-14 DSP 2 14 mm5343-02-15 DSP 2 15 mm5343-02-16 DSP 2 16 mm5343-02-18 DSP 2 18 mm5343-03-20 DSP 3 20 mm5343-03-22 DSP 3 22 mm5343-03-25 DSP 3 25 mm5343-04-26 DSP 4 26 mm5343-04-28 DSP 4 28 mm5343-04-30 DSP 4 30 mm5343-05-35 DSP 5 35 mm5343-05-38 DSP 5 38 mm5343-05-42 DSP 5 42 mm

Complete double clamp consisting of clamp halves (DPLK), welding plate (DSP), sectional plate (DTP) and bolt (SKB).



5:70

5394-0WELD PLATE

Double series

5394-1SECTiONAL PLATE

Double series

5360CLAmP

POLYPROPYLENE

Light series

5360CLAmP

POLYPROPYLENE

Light series

Part number Descr. Group Part number Descr. Group

Part number Descr. Pipe Ø

Part number Descr. Pipe Ø

5394-01-01 DSP 2 15394-02-01 DSP 2 25394-03-01 DSP 2 35394-04-01 DSP 2 45394-05-01 DSP 2 5

5394-11-01 DTP 2 15394-12-01 DTP 2 25394-13-01 DTP 2 35394-14-01 DTP 2 45394-15-01 DTP 2 5

5360-00-04 LKE 4 mm5360-00-06 LKE 6 mm5360-00-08 LKE 8 mm5360-00-10 LKE 10 mm5360-00-12 LKE 12 mm5360-00-15 LKE 15 mm5360-00-18 LKE 18 mm5360-00-22 LKE 22 mm

5360-04-04 LKD 4 mm5360-06-06 LKD 6 mm5360-06-08 LKD 6 mm5360-08-08 LKD 8 mm5360-10-10 LKD 10 mm5360-12-12 LKD 12 mm5360-12-15 LKD 12 mm5360-15-15 LKD 15 mm5360-18-18 LKD 18 mm5360-22-22 LKD 22 mm

5392-5bOLT fOR WASHER

Double series

5393-0WASHER

Double series


Part number Descr. Thread Group

5392-51-25 SKB M 6 25 mm 15392-52-30 SKB M 8 30 mm 25392-53-40 SKB M 8 40 mm 35392-53-45 SKB M 8 45 mm 45392-55-55 SKB M 8 55 mm 5

5393-00-06 DB 2 M6 15393-00-08 DB 2 M8 2-5

5392-5bOLT

fOR SECTiONAL PLATE

Double series


5392-33-35 SKB M 6 35 15392-52-35 SKB M 8 35 25392-53-45 SKB M 8 45 35392-54-50 SKB M 8 50 45392-55-60 SKB M 8 60 5

Ø 6.8 mm

Ø 6.8 mm

THE SkY’S THE LimiT

You now have the possibility to get your pipes in almost any shape you wish. Through our unique patented technology for hydroforming, we blow up the pipes in a three-dimensional tool and have almost total design freedom. The technique have been used in larger scale in the car manufacturing industries for some time, but it has been too expensive for smaller industries.

Not anymore.

With our patent it is now available for everyone.

Just use your imagination.


6

HYDROSCAND CUTTiNG RiNG fiTTiNGS

CUTTiNG RiNG fiTTiNGS

PRODUCT GROUP 600

Hydroscand's cutting ring fittings are used for tubing, mainly in hydraulic and pneumatic applications.

Hydroscand can also offer a stainless steel cutting ring fitting designed for aggressive media and surroundings.

Working pressure/PN up to 63 MPa/630 Bar, for male pipes of 4–42 mm diameter. Pressure ratings according to ISO 8434-1.

Cutting ring fittings are characterised by a very rigid tube assembling, resistance to vibrations and pressure impulses. The fittings can be dismantled/reassembled more than once.

When assembling the cutting ring fitting, the ring's two edges are pressed into the pipe, which gives a mechanical bearing. The first edge has already started the penetration before the second edge starts cutting into the pipe. After the assembling, part three of the cutting ring is pushed in between the cone and the pipe, to make sure no vibrations are transported to the cutting edges. The fourth part secures radial movement. The design of the ring profile gives a very strong, axial and radial bearing. The tension is carried by the whole cutting ring length.

MaterialsHydroscand's cutting ring fittings are manufactured of automatic steel or of forged materials. The standard surface treatment is E-coated. E-coated is the name of the surface treatment Hydroscand use for its fittings. It is Cr6 free and therefore more environmentally friendly and better for human health.

Temperatures up to +200°C. Sealing with standard NBR maximum +90°C.

ConnectionsWithworth pipe thread G, cone pipe threads R, NPTF cone, UNF, metric. Cutting ring cone according to ISO 8434-1.

When different connection dimensions are possible, the standard dimension is noted in bold text.

CertificationsHydroscand can deliver fittings with the following standards/certificates: DVGW, Norske Veritas, Germanischer Lloyd, ISO 9002.

Please note that all cutting ring fittings are also available without nut and cutting ring.


CUTTiNG RiNG fiTTiNGS PAGE

TAbLE Of CONTENTS

1

2

3

4

6177 GE – NPT LL Straight fitting – NPT M 2416171 GE – R/C LL Straight fitting – R M 2416172 GE – MK/C LL Straight fitting – MK M 2416173 WE – R/C LL Elbow fitting – R M 2416175 WE – NPT LL 90° Elbow fitting – NPT M 2416174 WE – MK/C LL 90° Elbow fitting – MK M 2416182 TE – R/C LL T-Fitting – R M 2416181 TE – MK/C LL T-Fitting – MK M 2416184 LE – R/C LL L-Fitting – R M 2426183 LE – MK/C LL L-Fitting – MK M 2426176 G LL Straight joint fitting 2426178 W LL Elbow joint fitting 2426187 T LL T-Joint fitting 2426188 C LL Cross joint fitting 2426189 RED LL Reduction – fitting 2426186 WHO – G LL Banjo – G M 2426002 GE – GA Straight fitting – G M 2436185 SWVE – M LL Banjo – M M 2436179 D LL Cutting ring 2436180 M LL Nut 2436003 GE – GB Straight fitting – G M 2436003 S GE – GB 60° Straight fitting – G M 2446003 GE – GB Body Straight body, male G-thread 2446006 GE – MB Straight fitting – M M 2456006 GE – MB Body Straight body, male M-thread 2456007 GE – NPT Straight fitting – NPT M 2456008 GE – UNF Straight fitting – UNF M 2466009 GE – G/ED Straight fitting – G M 2466009 GE – G/ED Straight body with male G-thread 2476010 GE – M/ED Straight fitting – M M 2476010 GE – M/ED Straight body with male M-thread 2476011 WE – R/C 90° elbow fitting – R M 2486013 WE – GB 90° elbow fitting – G M 2486014 WE – MKC 90° elbow fitting – MK M 248


CUTTiNG RiNG fiTTiNGS PAGE

TAbLE Of CONTENTS

6016 WE – MB 90° elbow fitting – M M 2486017 WE – NPT 90° elbow fitting NPT 2496018 VEE – G M Adjustable elbow 45° 2496021 TE – R/C T-fitting – R M 2496023 TE – GB T-fitting – G M 2496031 LE – R/C L-fitting – R M 2506033 LE – R/C L-fitting – G M 2506033 LE – MK/C L-fitting – MK M 2506036 LE – MB L-fitting – M M 2506035 DKLO Straight joint fitting 2506235 DKLO–DKSO Straight joint fitting 2506041 G Straight joint fitting 2516042 W Elbow joint fitting 2516043 T T-Joint fitting 2516044 K Cross joint fitting 2516045 SV Bulkhead connection 2526046 WSV Elbow bulkhead connection 2526047 AS Straight welding boss 2526048 ESV Welding bulkhead connection 2526049 WAS Elbow welding fitting 2536050 EVW Adjustable elbow fitting 2536051 EVWO Adjustable elbow fitting 2536060 EVT Adjustable T-fitting 2536061 EVTO Adjustable T-fitting 2546070 EVL Adjustable L-fitting 2546071 EVL Adjustable L-fitting 2546083 EVGE–GB Straight standpipe 2556089 EVGE–ED Straight standpipe 2556092 EVGEO – M/ED Straight standpipe 2566090 EVGEO – G/ED Straight standpipe 2566101 GAI – G Straight fitting – G F 2566102 GAI – M Straight fitting – M F 2566103 MAV – G Manometer – fitting 2576104 MAV – EV – G Manometer 2576105 RED Reduction – fitting 2576107 KOR – L Reduction 2586109 KORO – L Straight reduction 2586607 KOR – S Reduction 2596609 KORO – S Straight reduction 2596110 WHB – G Banjo – G M 2606111 WHB – M Banjo – M M 2606118 WHO – G Banjo – G M 2606119 WHO – M Banjo – M M 2606112 DSVW – G Banjo – G M 2616114 DSVT – G Banjo T – G M 2616116 WHBT – G Banjo T – G M 2616128 SWVE – G Banjo T – G M 2616110-00/03 Seal Ring 2626120 RHD Non-return valve 2626121 RHV – G – ED Non-return valve 2626123 RHZ – G – ED Non-return valve 2626126 RHR Non-return valve 2636127 RHDI Non-return valve 2636131 Adaptor kit 2636130 PL Plug 2636149-01 D Cutting ring 2646150 M Nut 2646152-03 D – ED B4 Cutting ring and soft seal 2646151 FM Pre-installation dies 2646153 GM Locking nut 2666160-50 O-ring 2666160 SN Welding nipple with O-ring 266

PRODUCT GROUP 600 HYDROSCAND CUTTiNG RiNG fiTTiNGS


6

PRESSURE RATiNGS fOR CUTTiNG RiNG fiTTiNGS. fOR PiPE fiTTiNGS Ø MALELL L S

4 5 6 8 6 8 10 12 15 18 22 28 35 42 6 8 10 12 14 16 20 25 30 386001 6003 6006

100 315 160 630 400 315

6007 6008 60096010 6011 60136014 6016 60176021 6024 60276034 6035 60366041 6042 60436044 6045 60466047 6048 60496050 6051 60606061 6070 60716087 6089 60906092 6101 61026105 6107 61096130 6185 62166217 6218 621965376088 6172 100 400 315 250 630 400 3156110 6111 6116

400 315 250 400 315 2506118 61196083 6086 315 250 630* 400 2506103 6104 315 6306018 315 250 160 315 250 200 1606002 250 160 100 630 400 2506128 100 250 160 250 1606023 6033 160 400 3156112 6114 250 100 400** 250**6118 6119 100 400 315 250 400 315 2506120 6121 6123 250 160 100 400 250

*=safety factor 3 **=safety factor min 1,6

THREAD SizES fOR CUTTiNG RiNG fiTTiNGS

Pipe size Thread

4 LL

4 LL

6 LL

8 LL

M 8 x 1.0

M 10 x 1.0

M 10 x 1.0

M 12 x 1.0

6 L

8 L

10 L

12 L

15 L

18 L

22 L

28 L

35 L

42 L

M 12 x 1.5

M 14 x 1.5

M 16 x 1.5

M 18 x 1.5

M 22 x 1.5

M 26 x 1.5

M 30 x 2.0

M 36 x 2.0

M 45 x 2.0

M 52 x 2.0

6 S

8 S10 S

12 S

14 S

16 S

20 S

25 S

30 S

38 S

M 14 x 1.5

M 16 x 1.5

M 18 x 1.5

M 20 x 1.5

M 22 x 1.5

M 24 x 1.5

M 30 x 2.0

M 36 x 2.0

M 42 x 2.0

M 52 x 2.0

HYDROSCAND CUTTiNG RiNG fiTTiNGS PRODUCT GROUP 600


ASSEMbLY iNSTRUCTiONS

1. Cut the tube at a 90 degree angle (do not use roller, type tube cutters), remove all internal and external burrs.

2. Oil the 24°cone, the thread of the fitting body, the cutting ring and the nut.

a. For carbon steel fittings, use mineral oil.

b. For stainless steel fittings, use a special high-performance lubricant.

3. Fit the nut and the cutting ring on the tubes as shown. The larger diameter of the cutting ring must face the nut.

4. Insert the tube on the 24°cone until it comes into contact with the stop. Tighten the nut by hand until the cutting ring rest firmly on the nut. Then tighten the nut with a wrench until the cutting edge of the ring is in contact with the tube and prevents rotation if this.

5. Holding the tube against its stop and making sure it does not rotate, tighten the nut by ¾ of a turn. This way, the cutting ring cut into the outer part of the tube for the necessary depth and raises an edge in front of its cutting edge while the second cutting edge clinches the tube at the same time.

6. Loosen the nut and check that there is a clearly raised edge all round the tube. The edge must cover 80% of the front of the cutting ring. This check is peremptory for the safety of all concerned!! If the raised edge is not satisfactory, pre-assembly must be repeated. The cutting ring can rotate on the tube.

7. Reassemble the nut on the fitting until a certain resistance is encountered and then tighten for a further 1/4 turn.

A. Final installation of works pre-installed fittings: Screw the nut by hand as hard as you can, then the nut should be tightened approximately 1/2–3/4 turn more. This information apply to all our pre-installed fittings.

B. All the pre-assembly of stainless steel fittings must be performed with a pre-assembly tool (blocks or machines).



6

6171GE – R/C LL

STRAiGHT fiTTiNG – R M

Cone sealing. C DIN 3852

6172GE – MK/C LL

STRAiGHT fiTTiNG – MK M


6173WE – R/C LL

ELbOW fiTTiNG – R M


6174WE – MK/C LL

90° ELbOW fiTTiNG – MK M


6177GE – NPT LL

STRAiGHT fiTTiNG – NPT M

Cone sealing. ANSI/ASME B1.20.1-1983

Part number Type Pipe size Thread





6171-04-02 GE 4 LL 4 mm R 1/8"6171-05-02 GE 5 LL 5 mm R 1/8"6171-06-02 GE 6 LL 6 mm R 1/8"6171-08-02 GE 8 LL 8 mm R 1/8"6171-08-04 GE 8 LL 8 mm R 1/4"6171-10-04 GE 10 LL 10 mm R 1/4"6171-12-04 GE 12 LL 12 mm R 1/4"

6172-04-06 GE 4 LL 4 mm M 6 x 1 k6172-04-08 GE 4 LL 4 mm M 8 x 1 k6172-05-08 GE 5 LL 5 mm M 8 x 1 k6172-06-06 GE 6 LL 6 mm M 6 x 1 k6172-06-08 GE 6 LL 6 mm M 8 x 1 k6172-06-10 GE 6 LL 6 mm M 10 x 1 k6172-08-10 GE 8 LL 8 mm M 10 x 1 k

6173-04-02 WE 4 LL 4 mm R 1/8"6173-05-02 WE 5 LL 5 mm R 1/8"6173-06-02 WE 6 LL 6 mm R 1/8"6173-08-02 WE 8 LL 8 mm R 1/8"6173-10-04 WE 10 LL 10 mm R 1/4"6173-12-04 WE 12 LL 12 mm R 1/4"

6182TE – R/C LL

T-fiTTiNG – R M



6182-04-02 TE 4 LL 4 mm R 1/8"6182-05-02 TE 5 LL 5 mm R 1/8"6182-06-02 TE 6 LL 6 mm R 1/8"6182-08-02 TE 8 LL 8 mm R 1/8"

6181TE – MK/C LL

T-fiTTiNG – MK M



6181-04-08 TE 4 LL 4 mm M8 x 1 k6181-05-08 TE 5 LL 5 mm M8 x 1 k6181-06-10 TE 6 LL 6 mm M10 x 1 k6181-08-10 TE 8 LL 8 mm M10 x 1 k

6174-04-06 WE 4 LL 4 mm M 6 x 1 k6174-04-08 WE 4 LL 4 mm M 8 x 1 k6174-05-08 WE 5 LL 5 mm M 8 x 1 k6174-06-06 WE 6 LL 6 mm M 6 x 1 k6174-06-08 WE 6 LL 6 mm M 8 x 1 k6174-06-10 WE 6 LL 6 mm M 10 x 1 k6174-08-10 WE 8 LL 8 mm M 10 x 1 k

6177-04-02 GE 4 LL 4 mm 1/8"-27 NPT6177-05-02 GE 5 LL 5 mm 1/8"-27 NPT6177-06-02 GE 6 LL 6 mm 1/8"-27 NPT6177-08-02 GE 8 LL 8 mm 1/8"-27 NPT

6175WE – NPT LL

90° ELbOW fiTTiNG – NPT M



6175-04-02 WE 4 LL 4 mm 1/8"-27 NPT6175-05-02 WE 5 LL 5 mm 1/8"-27 NPT6175-06-02 WE 6 LL 6 mm 1/8"-27 NPT6175-08-02 WE 8 LL 8 mm 1/8"-27 NPT




6184LE – R/C LL

L-fiTTiNG – R M


6183LE – MK/C LL

L-fiTTiNG – MK M


6176G LL

STRAiGHT jOiNT fiTTiNG

6178W LL

ELbOW jOiNT fiTTiNG

6187T LL

T-jOiNT fiTTiNG



Part number Type Pipe size



6184-04-02 LE 4 LL 4 mm R 1/8"6184-05-02 LE 5 LL 5 mm R 1/8"6184-06-02 LE 6 LL 6 mm R 1/8"6184-08-02 LE 8 LL 8 mm R 1/8"

6183-04-08 LE 4 LL 4 mm M8 x 1 k6183-05-08 LE 5 LL 5 mm M8 x 1 k6183-06-10 LE 6 LL 6 mm M10 x 1 k6183-08-10 LE 8 LL 8 mm M10 x 1 k

6176-04-04 G 4 LL 4 mm6176-05-05 G 5 LL 5 mm6176-06-06 G 6 LL 6 mm6176-08-08 G 8 LL 8 mm6176-10-10 G 10 LL 10 mm6176-12-12 G 12 LL 12 mm

6178-04-04 W 4 LL 4 mm6178-05-05 W 5 LL 5 mm6178-06-06 W 6 LL 6 mm6178-08-08 W 8 LL 8 mm6178-10-10 W 10 LL 10 mm6178-12-12 W 12 LL 12 mm

6187-04-04 T 4 LL 4 mm6187-05-05 T 5 LL 5 mm6187-06-06 T 6 LL 6 mm6187-08-08 T 8 LL 8 mm6187-10-10 T 10 LL 10 mm6187-12-12 T 12 LL 12 mm

6188C LL

CROSS jOiNT fiTTiNG


6188-04-04 C 4 LL 4 mm6188-06-06 C 6 LL 6 mm6188-08-08 C 8 LL 8 mm

6189RED LL

REDUCTiON – fiTTiNG


6189-06-04 RED 6 / 4 LL 6 - 4 mm6189-08-04 RED 8 / 4 LL 8 - 4 mm6189-08-06 RED 8 / 6 LL 8 - 6 mm

6186WHO – G LL

bANjO – G M


6186-04-02 WHO 4 LL 4 mm G 1/8"6186-05-02 WHO 5 LL 5 mm G 1/8"6186-06-02 WHO 6 LL 6 mm G 1/8"6186-08-02 WHO 8 LL 8 mm G 1/8"



6

6185SWVE – M LL bANjO – M M


6185-04-08 SWVE 4 LL 4 mm M 8 x 1.06185-05-08 SWVE 5 LL 6 mm M 8 x 1.06185-06-10 SWVE 6 LL 6 mm M 10 x 1.06185-08-10 SWVE 8 LL 8 mm M 10 x 1.0

6179D LL

CUTTiNG RiNG


6179-00-04 D 4 LL 4 mm6179-00-05 D 5 LL 5 mm6179-00-06 D 6 LL 6 mm6179-00-08 D 8 LL 8 mm6179-00-12 D 12 LL 12 mm

6180M LL NUT

6002GE – GA

STRAiGHT fiTTiNG – G M

Bonded seal. A DIN 3852-2

6003GE – Gb


Cutting edge. ISO 1179-4




6180-00-04 M 4 LL 4 mm M 8 x 1.06180-00-05 M 5 LL 5 mm M 10 x 1.06180-00-06 M 6 LL 6 mm M 10 x 1.06180-00-08 M 8 LL 8 mm M 12 x 1.06180-00-12 M 12 LL 12 mm M 16 x 1.0

6002-06-02 GE 6 L 6 mm G 1/8"6002-10-04 GE 10 L 10 mm G 1/4"6002-12-04 GE 12 L 12 mm G 1/4"6002-12-06 GE 12 L 12 mm G 3/8"6002-12-08 GE 12 L 12 mm G 1/2"6002-15-06 GE 15 L 15 mm G 3/8"

6502-06-02 GE 6 S 6 mm G 1/8"6502-06-04 GE 6 S 6 mm G 1/4"6502-08-04 GE 8 S 8 mm G 1/4"6502-10-06 GE 10 S 10 mm G 3/8"6502-12-06 GE 12 S 12 mm G 3/8"6502-16-08 GE 16 S 16 mm G 1/2"6502-20-12 GE 20 S 20 mm G 3/4"6502-25-16 GE 25 S 25 mm G 1"6502-30-20 GE 30 S 30 mm G 1 1/4"

6003-06-02 GE 6 L 6 mm G 1/8"6003-06-04 GE 6 L 6 mm G 1/4"6003-06-06 GE 6 L 6 mm G 3/8"6003-08-02 GE 8 L 8 mm G 1/8"6003-08-04 GE 8 L 8 mm G 1/4"6003-08-06 GE 8 L 8 mm G 3/8"6003-08-08 GE 8 L 8 mm G 1/2"6003-10-02 GE 10 L 10 mm G 1/8"6003-10-04 GE 10 L 10 mm G 1/4"6003-10-06 GE 10 L 10 mm G 3/8"6003-10-08 GE 10 L 10 mm G 1/2"6003-12-04 GE 12 L 12 mm G 1/4"6003-12-06 GE 12 L 12 mm G 3/8"6003-12-08 GE 12 L 12 mm G 1/2"6003-15-06 GE 15 L 15 mm G 3/8"6003-15-08 GE 15 L 15 mm G 1/2"6003-15-12 GE 15 L 15 mm G 3/4"6003-18-08 GE 18 L 18 mm G 1/2"6003-18-12 GE 18 L 18 mm G 3/4"6003-22-08 GE 22 L 22 mm G 1/2"6003-22-12 GE 22 L 22 mm G 3/4"6003-22-16 GE 22 L 22 mm G 1"6003-28-12 GE 28 L 28 mm G 3/4"6003-28-16 GE 28 L 28 mm G 1"6003-35-16 GE 35 L 35 mm G 1"6003-35-20 GE 35 L 35 mm G 1 1/4"6003-42-24 GE 42 L 42 mm G 1 1/2"

6503-06-04 GE 6 S 6 mm G 1/4"6503-08-04 GE 8 S 8 mm G 1/4"6503-08-06 GE 8 S 8 mm G 3/8"6503-10-04 GE 10 S 10 mm G 1/4"6503-10-06 GE 10 S 10 mm G 3/8"6503-12-04 GE 12 S 12 mm G 1/4"6503-12-06 GE 12 S 12 mm G 3/8"6503-12-08 GE 12 S 12 mm G 1/2"6503-14-06 GE 14 S 14 mm G 3/8"6503-14-08 GE 14 S 14 mm G 1/2"6503-16-06 GE 16 S 16 mm G 3/8"6503-16-08 GE 16 S 16 mm G 1/2"6503-16-12 GE 16 S 16 mm G 3/4"6503-20-08 GE 20 S 20 mm G 1/2"6503-20-12 GE 20 S 20 mm G 3/4"6503-20-16 GE 20 S 20 mm G 1"6503-25-12 GE 25 S 25 mm G 3/4"6503-25-16 GE 25 S 25 mm G 1"6503-30-12 GE 30 S 30 mm G 3/4"6503-30-16 GE 30 S 30 mm G 1"6503-30-20 GE 30 S 30 mm G 1 1/4"6503-38-20 GE 38 S 38 mm G 1 1/4"6503-38-24 GE 38 S 38 mm G 1 1/2"




6003 SGE – Gb 60°



6003 GE – Gb bODY

STRAiGHT bODY WiTH MALE G-THREAD


Part number Type Pipe size Thread Part number Type Pipe size Thread

6003-06-02S GE 6 L 6 mm G 1/8"6003-08-04S GE 8 L 8 mm G 1/4"6003-10-04S GE 10 L 10 mm G 1/4"6003-10-06S GE 10 L 10 mm G 3/8"6003-10-08S GE 10 L 10 mm G 1/2"6003-12-04S GE 12 L 12 mm G 1/4"6003-12-06S GE 12 L 12 mm G 3/8"6003-12-08S GE 12 L 12 mm G 1/2"6003-15-06S GE 15 L 15 mm G 3/8"6003-15-08S GE 15 L 15 mm G 1/2"6003-18-08S GE 18 L 18 mm G 1/2"6003-22-12S GE 22 L 22 mm G 3/4"6003-28-16S GE 28 L 28 mm G 1"6003-35-20S GE 35 L 35 mm G 1 1/4"6003-42-24S GE 42 L 42 mm G 1 1/2"

6503-08-04S GE 8 S 8 mm G 1/4"6503-10-06S GE 10 S 10 mm G 3/8"6503-12-06S GE 12 S 12 mm G 3/8"6503-16-08S GE 16 S 16 mm G 1/2"6503-20-08S GE 20 S 20 mm G 1/2"6503-20-12S GE 20 S 20 mm G 3/4"6503-25-12S GE 25 S 25 mm G 3/4"6503-25-16S GE 25 S 25 mm G 1"6503-30-12S GE 30 S 30 mm G 3/4"6503-30-16S GE 30 S 30 mm G 1"6503-30-20S GE 30 S 30 mm G 1 1/4"6503-38-24S GE 38 S 38 mm G 1 1/2"

6003-06-03 GE 6 L Body 6 mm G 1/8"6003-08-03 GE 8 L Body 8 mm G 1/8"6003-08-05 GE 8 L Body 8 mm G 1/4"6003-08-07 GE 8 L Body 8 mm G 3/8"6003-10-05 GE 10 L Body 10 mm G 1/4"6003-10-07 GE 10 L Body 10 mm G 3/8"6003-10-09 GE 10 L Body 10 mm G 1/2"6003-12-05 GE 12 L Body 12 mm G 1/4"6003-12-07 GE 12 L Body 12 mm G 3/8"6003-12-09 GE 12 L Body 12 mm G 1/2"6003-15-07 GE 15 L Body 15 mm G 3/8"6003-15-09 GE 15 L Body 15 mm G 1/2"6003-15-13 GE 15 L Body 15 mm G 3/4"6003-18-09 GE 18 L Body 18 mm G 1/2"6003-18-13 GE 18 L Body 18 mm G 3/4"6003-22-09 GE 22 L Body 22 mm G 1/2"6003-22-13 GE 22 L Body 22 mm G 3/4"6003-28-17 GE 28 L Body 28 mm G 1"6003-35-17 GE 35 L Body 35 mm G 1"6003-35-21 GE 35 L Body 35 mm G 1 1/4"6003-42-25 GE 42 L Body 42 mm G 1 1/2"

6503-06-05 GE 6 S Body 6 mm G 1/4"6503-08-05 GE 8 S Body 8 mm G 1/4"6503-10-07 GE 10 S Body 10 mm G 3/8"6503-12-07 GE 12 S Body 12 mm G 3/8"6503-12-09 GE 12 S Body 12 mm G 1/2"6503-14-09 GE 14 S Body 14 mm G 1/2"6503-16-09 GE 16 S Body 16 mm G 1/2"6503-16-13 GE 16 S Body 16 mm G 3/4"6503-20-09 GE 20 S Body 20 mm G 1/2"6503-20-13 GE 20 S Body 20 mm G 3/4"6503-25-17 GE 25 S Body 25 mm G 1"6503-30-21 GE 30 S Body 30 mm G 1 1/4"6503-38-21 GE 38 S Body 38 mm G 1 1/4"




6

6006GE – Mb

STRAiGHT fiTTiNG – M M


6007GE – NPT

STRAiGHT fiTTiNG – NPT M


6006 GE – Mb bODY

STRAiGHT bODY WiTH MALE M-THREAD




6006-06-10 GE 6 L 6 mm M 10 x 1.06006-08-12 GE 8 L 8 mm M 12 x 1.56006-08-14 GE 8 L 8 mm M 14 x 1.56006-08-22 GE 8 L 8 mm M 22 x 1.56006-10-14 GE 10 L 10 mm M 14 x 1.56006-10-16 GE 10 L 10 mm M 16 x 1.56006-10-22 GE 10 L 10 mm M 22 x 1.56006-12-14 GE 12 L 12 mm M 14 x 1.56006-12-16 GE 12 L 12 mm M 16 x 1.56006-12-18 GE 12 L 12 mm M 18 x 1.56006-15-16 GE 15 L 15 mm M 16 x 1.56006-15-18 GE 15 L 15 mm M 18 x 1.56006-18-22 GE 18 L 18 mm M 22 x 1.56006-22-22 GE 22 L 22 mm M 22 x 1.56006-22-26 GE 22 L 22 mm M 26 x 1.56006-28-33 GE 28 L 28 mm M 33 x 2.06006-42-48 GE 42 L 42 mm M 48 x 2.0

6506-06-12 GE 6 S 6 mm M 12 x 1.56506-08-14 GE 8 S 8 mm M 14 x 1.56506-10-16 GE 10 S 10 mm M 16 x 1.56506-12-18 GE 12 S 12 mm M 18 x 1.56506-14-20 GE 14 S 14 mm M 20 x 1.56506-16-22 GE 16 S 16 mm M 22 x 1.56506-20-27 GE 20 S 20 mm M 27 x 2.06506-25-33 GE 25 S 25 mm M 33 x 2.06506-30-42 GE 30 S 30 mm M 42 x 2.06506-38-48 GE 38 S 38 mm M 48 x 2.0

6007-06-02 GE 6 L 6 mm 1/8"-27 NPT6007-06-04 GE 6 L 6 mm 1/4"-18 NPT6007-08-02 GE 8 L 8 mm 1/8"-27 NPT6007-08-04 GE 8 L 8 mm 1/4"-18 NPT6007-10-04 GE 10 L 10 mm 1/4"-18 NPT6007-12-04 GE 12 L 12 mm 1/4"-18 NPT6007-12-06 GE 12 L 12 mm 3/8"-18 NPT6007-12-08 GE 12 L 12 mm 1/2"-14 NPT6007-15-08 GE 15 L 15 mm 1/2"-14 NPT6007-18-08 GE 18 L 18 mm 1/2"-14 NPT6007-22-12 GE 22 L 22 mm 3/4"-14 NPT6007-28-16 GE 28 L 28 mm 1"-11½ NPT6007-35-20 GE 35 L 35 mm 1 1/4"-11½ NPT6007-42-24 GE 42 L 42 mm 1 1/2"-11½ NPT

6507-06-04 GE 6 S 6 mm 1/4"-18 NPT6507-08-04 GE 8 S 8 mm 1/4"-18 NPT6507-10-04 GE 10 S 10 mm 1/4"-18 NPT6507-10-06 GE 10 S 10 mm 3/8"-18 NPT6507-12-04 GE 12 S 12 mm 1/4"-18 NPT6507-12-06 GE 12 S 12 mm 3/8"-18 NPT6507-14-08 GE 14 S 14 mm 1/2"-14 NPT6507-16-08 GE 16 S 16 mm 1/2"-14 NPT6507-20-12 GE 20 S 20 mm 3/4"-14 NPT6507-25-16 GE 25 S 25 mm 1"-11½ NPT6507-30-20 GE 30 S 30 mm 1 1/4"-11½ NPT6507-38-24 GE 38 S 38 mm 1 1/2"-11½ NPT

6006-06-11 GE 6 L Body 6 mm M 10 x 1.06006-08-13 GE 8 L Body 8 mm M 12 x 1.56006-10-15 GE 10 L Body 10 mm M 14 x 1.56006-10-23 GE 10 L Body 10 mm M 22 x 1.56006-12-17 GE 12 L Body 12 mm M 16 x 1.56006-12-19 GE 12 L Body 12 mm M 18 x 1.56006-15-23 GE 15 L Body 15 mm M 22 x 1.56006-18-23 GE 18 L Body 18 mm M 22 x 1.56006-22-27 GE 22 L Body 22 mm M 26 x 1.5

6506-12-19 GE 12 S Body 12 mm M 18 x 1.56506-16-23 GE 16 S Body 16 mm M 22 x 1.56506-30-43 GE 30 S Body 30 mm M 42 x 2.0



6008GE – UNf

STRAiGHT fiTTiNG – UNf M

O-ring sealing. UN-UNF SAE J514

6009GE – G/ED


ED sealing


6008-06-07 GE 6 L 6 mm 7/16"-20 UNF6008-08-07 GE 8 L 8 mm 7/16"-20 UNF6008-08-08 GE 8 L 8 mm 1/2"-20 UNF6008-10-07 GE 10 L 10 mm 7/16"-20 UNF6008-10-09 GE 10 L 10 mm 9/16"-18 UNF6008-12-09 GE 12 L 12 mm 9/16"-18 UNF6008-12-12 GE 12 L 12 mm 3/4"-16 UNF6008-12-14 GE 12 L 12 mm 7/8"-14 UNF6008-15-12 GE 15 L 15 mm 3/4"-16 UNF6008-15-14 GE 15 L 15 mm 7/8"-14 UNF6008-18-12 GE 18 L 18 mm 3/4"-16 UNF6008-18-14 GE 18 L 18 mm 7/8"-14 UNF6008-22-14 GE 22 L 22 mm 7/8"-14 UNF6008-22-17 GE 22 L 22 mm 1 1/16"-12 UN6008-22-21 GE 22 L 22 mm 1 5/16"-12 UN6008-28-17 GE 28 L 28 mm 1 1/16"-12 UN6008-28-21 GE 28 L 28 mm 1 5/16"-12 UN6008-35-21 GE 35 L 35 mm 1 5/16"-12 UN6008-35-26 GE 35 L 35 mm 1 5/8"-12 UN6008-42-26 GE 42 L 42 mm 1 5/8"-12 UN

6508-08-07 GE 8 S 8 mm 7/16"-20 UNF6508-08-08 GE 8 S 8 mm 1/2"-20 UNF6508-10-09 GE 10 S 10 mm 9/16"-18 UNF6508-12-09 GE 12 S 12 mm 9/16"-18 UNF6508-12-12 GE 12 S 12 mm 3/4"-16 UNF6508-16-12 GE 16 S 16 mm 3/4"-16 UNF6508-16-14 GE 16 S 16 mm 7/8"-14 UNF6508-20-12 GE 20 S 20 mm 3/4"-16 UNF6508-20-14 GE 20 S 20 mm 7/8"-14 UNF6508-20-17 GE 20 S 20 mm 1 1/16"-12 UN6508-25-17 GE 25 S 25 mm 1 1/16"-12 UN6508-25-21 GE 25 S 25 mm 1 5/16"-12 UN6508-30-21 GE 30 S 30 mm 1 5/16"-12 UN6508-30-26 GE 30 S 30 mm 1 5/8"-12 UN6508-38-26 GE 38 S 38 mm 1 5/8"-12 UN6508-38-30 GE 38 S 38 mm 1 7/8"-12 UN

6009-06-02 GE 6 L 6 mm G 1/8"6009-06-04 GE 6 L 6 mm G 1/4"6009-08-04 GE 8 L 8 mm G 1/4"6009-08-06 GE 8 L 8 mm G 3/8"6009-10-04 GE 10 L 10 mm G 1/4"6009-10-06 GE 10 L 10 mm G 3/8"6009-10-08 GE 10 L 10 mm G 1/2"6009-12-04 GE 12 L 12 mm G 1/4"6009-12-06 GE 12 L 12 mm G 3/8"6009-12-08 GE 12 L 12 mm G 1/2"6009-15-06 GE 15 L 15 mm G 3/8"6009-15-08 GE 15 L 15 mm G 1/2"6009-15-12 GE 15 L 15 mm G 3/4"6009-18-06 GE 18 L 18 mm G 3/8"6009-18-08 GE 18 L 18 mm G 1/2"6009-18-12 GE 18 L 18 mm G 3/4"6009-22-12 GE 22 L 22 mm G 3/4"6009-22-16 GE 22 L 22 mm G 1"6009-28-16 GE 28 L 28 mm G 1"6009-28-20 GE 28 L 28 mm G 1 1/4"6009-35-16 GE 35 L 35 mm G 1"6009-35-20 GE 35 L 35 mm G 1 1/4"6009-42-20 GE 42 L 42 mm G 1 1/4"6009-42-24 GE 42 L 42 mm G 1 1/2"

6509-06-04 GE 6 S 6 mm G 1/4"6509-08-04 GE 8 S 8 mm G 1/4"6509-08-06 GE 8 S 8 mm G 3/8"6509-10-04 GE 10 S 10 mm G 1/4"6509-10-06 GE 10 S 10 mm G 3/8"6509-12-04 GE 12 S 12 mm G 1/4"6509-12-06 GE 12 S 12 mm G 3/8"6509-14-08 GE 14 S 14 mm G 1/2"6509-16-06 GE 16 S 16 mm G 3/8"6509-16-08 GE 16 S 16 mm G 1/2"6509-16-12 GE 16 S 16 mm G 3/4"6509-20-08 GE 20 S 20 mm G 1/2"6509-20-12 GE 20 S 20 mm G 3/4"6509-20-16 GE 20 S 20 mm G 1"6509-25-12 GE 25 S 25 mm G 3/4"6509-25-16 GE 25 S 25 mm G 1"6509-30-16 GE 30 S 30 mm G 1"6509-30-20 GE 30 S 30 mm G 1 1/4"6509-38-20 GE 38 S 38 mm G 1 1/4"6509-38-24 GE 38 S 38 mm G 1 1/2"




6

6010GE – M/ED

STRAiGHT fiTTiNG – M M

ED sealing. ISO 9974-2

6009GE – G/ED

STRAiGHT bODY WiTH MALE G-THREAD


6010GE – M/ED

STRAiGHT bODY WiTH MALE M-THREAD


Part number Type Pipe size ThreadPart number Type Pipe size Thread


6010-06-10 GE 6 L 6 mm M 10 x 1.06010-08-12 GE 8 L 8 mm M 12 x 1.56010-10-12 GE 10 L 10 mm M 12 x 1.56010-10-14 GE 10 L 10 mm M 14 x 1.56010-10-16 GE 10 L 10 mm M 16 x 1.56010-12-16 GE 12 L 12 mm M 16 x 1.56010-15-18 GE 15 L 15 mm M 18 x 1.56010-15-22 GE 15 L 15 mm M 22 x 1.56010-18-22 GE 18 L 18 mm M 22 x 1.56010-22-26 GE 22 L 22 mm M 26 x 1.56010-28-33 GE 28 L 28 mm M 33 x 2.06010-35-42 GE 35 L 35 mm M 42 x 2.06010-42-48 GE 42 L 42 mm M 48 x 2.0

6510-06-12 GE 6 S 6 mm M 12 x 1.56510-08-14 GE 8 S 8 mm M 14 x 1.56510-10-16 GE 10 S 10 mm M 16 x 1.56510-12-18 GE 12 S 12 mm M 18 x 1.56510-14-20 GE 14 S 14 mm M 20 x 1.56510-16-22 GE 16 S 16 mm M 22 x 1.56510-20-27 GE 20 S 20 mm M 27 x 2.06510-25-33 GE 25 S 25 mm M 33 x 2.06510-30-42 GE 30 S 30 mm M 42 x 2.06510-38-48 GE 38 S 38 mm M 48 x 2.0

6009-06-03 GE 6 L Body 6 mm G 1/8"6009-08-05 GE 8 L Body 8 mm G 1/4"6009-10-05 GE 10 L Body 10 mm G 1/4"6009-10-07 GE 10 L Body 10 mm G 3/8"6009-12-07 GE 12 L Body 12 mm G 3/8"6009-12-09 GE 12 L Body 12 mm G 1/2"6009-15-07 GE 15 L Body 15 mm G 3/8"6009-15-09 GE 15 L Body 15 mm G 1/2"6009-18-09 GE 18 L Body 18 mm G 1/2"6009-18-13 GE 18 L Body 18 mm G 3/4"6009-22-13 GE 22 L Body 22 mm G 3/4"6009-28-17 GE 28 L Body 28 mm G 1"6009-35-21 GE 35 L Body 35 mm G 1 1/4"6009-42-25 GE 42 L Body 42 mm G 1 1/2"

6509-06-05 GE 6 S Body 6 mm G 1/4"6509-08-05 GE 8 S Body 8 mm G 1/4"6509-10-07 GE 10 S Body 10 mm G 3/8"6509-12-07 GE 12 S Body 12 mm G 3/8"6509-12-09 GE 12 S Body 12 mm G 1/2"6509-14-09 GE 14 S Body 14 mm G 1/2"6509-16-09 GE 16 S Body 16 mm G 1/2"6509-16-13 GE 16 S Body 16 mm G 3/4"6509-20-09 GE 20 S Body 20 mm G 1/2"6509-20-13 GE 20 S Body 20 mm G 3/4"6509-20-17 GE 20 S Body 20 mm G 1"6509-25-13 GE 25 S Body 25 mm G 3/4"6509-25-17 GE 25 S Body 25 mm G 1"6509-30-17 GE 30 S Body 30 mm G 1"6509-30-21 GE 30 S Body 30 mm G 1 1/4"6509-38-21 GE 38 S Body 38 mm G 1 1/4"6509-38-25 GE 38 S Body 38 mm G 1 1/2"

6010-06-11 GE 6 L Body 6 mm M 10 x 1.06010-08-13 GE 8 L Body 8 mm M 12 x 1.56010-10-15 GE 10 L Body 10 mm M 14 x 1.56001-12-15 GE 12 L Body 12 mm M 14 x 1.56010-12-17 GE 12 L Body 12 mm M 16 x 1.56010-15-19 GE15 L Body 15 mm M 18 x 1.56010-18-23 GE 18 L Body 18 mm M 22 x 1.56010-22-27 GE 22 L Body 22 mm M 26 x 1.56010-35-43 GE 35 L Body 35 mm M 42 x 2.06010-42-49 GE 42 L Body 42 mm M 48 x 2.0

6510-06-13 GE 6 S Body 6 mm M 12 x 1.56510-08-15 GE 8 S Body 8 mm M 14 x 1.56510-10-17 GE 10 S Body 10 mm M 16 x 1.56510-12-19 GE 12 S Body 12 mm M 18 x 1.56510-14-21 GE 14 S Body 14 mm M 20 x 1.56510-16-23 GE 16 S Body 16 mm M 22 x 1.56510-20-28 GE 20 S Body 20 mm M 27 x 2.06510-25-34 GE 25 S Body 25 mm M 33 x 2.06510-30-43 GE 30 S Body 30 mm M 42 x 2.06510-38-49 GE 38 S Body 38 mm M 48 x 2.0



6011WE – R/C

90° ELbOW fiTTiNG – R M


6013WE – Gb

90° ELbOW fiTTiNG – G M

Cutting edge. B DIN 3852

6014WE – MKC

90° ELbOW fiTTiNG – MK M





6011-06-02 WE 6 L 6 mm R 1/8"6011-06-04 WE 6 L 6 mm R 1/4"6011-08-02 WE 8 L 8 mm R 1/8"6011-08-04 WE 8 L 8 mm R 1/4"6011-08-06 WE 8 L 8 mm R 3/8"6011-10-04 WE 10 L 10 mm R 1/4"6011-10-06 WE 10 L 10 mm R 3/8"6011-12-04 WE 12 L 12 mm R 1/4"6011-12-06 WE 12 L 12 mm R 3/8"6011-12-08 WE 12 L 12 mm R 1/2"6011-15-06 WE 15 L 15 mm R 3/8"6011-15-08 WE 15 L 15 mm R 1/2"6011-18-08 WE 18 L 18 mm R 1/2"6011-22-12 WE 22 L 22 mm R 3/4"

6511-06-04 WE 6 S 6 mm R 1/4"6511-08-04 WE 8 S 8 mm R 1/4"6511-10-06 WE 10 S 10 mm R 3/8"6511-12-06 WE 12 S 12 mm R 3/8"6511-14-08 WE 14 S 14 mm R 1/2"6511-16-08 WE 16 S 16 mm R 1/2"

6013-22-12 WE 22 L 22 mm G 3/4"6013-28-16 WE 28 L 28 mm G 1"6013-35-20 WE 35 L 35 mm G 1 1/4"6013-42-24 WE 42 L 42 mm G 1 1/2"

6513-20-12 WE 20 S 20 mm G 3/4"6513-25-16 WE 25 S 25 mm G 1"6513-30-20 WE 30 S 30 mm G 1 1/4"6513-38-24 WE 38 S 38 mm G 1 1/2"

6014-06-10 WE 6 L 6 mm M 10 x 1.06014-08-12 WE 8 L 8 mm M 12 x 1.56014-10-14 WE 10 L 10 mm M 14 x 1.56014-12-16 WE 12 L 12 mm M 16 x 1.56014-15-18 WE 15 L 15 mm M 18 x 1.56014-18-22 WE 18 L 18 mm M 22 x 1.5

6514-06-12 WE 6 S 6 mm M 12 x 1.56514-08-14 WE 8 S 8 mm M 14 x 1.56514-10-16 WE 10 S 10 mm M 16 x 1.56514-12-18 WE 12 S 12 mm M 18 x 1.56514-14-20 WE 14 S 14 mm M 20 x 1.56514-16-22 WE 16 S 16 mm M 22 x 1.5

6016WE – Mb

90° ELbOW fiTTiNG – M M



6016-22-26 WE 22 L 22 mm M 26 x 1.56016-28-33 WE 28 L 28 mm M 33 x 2.06016-35-42 WE 35 L 35 mm M 42 x 2.06016-42-48 WE 42 L 42 mm M 48 x 2.0

6516-20-27 WE 20 S 20 mm M 27 x 2.06516-25-33 WE 25 S 25 mm M 33 x 2.06516-30-42 WE 30 S 30 mm M 42 x 2.06516-38-48 WE 38 S 38 mm M 48 x 2.0




6

6017WE – NPT

90° ELbOW fiTTiNG NPT


6018VEE – G M

ADjUSTAbLE ELbOW 45°

O-ring with washer. ISO 1174-3

6021TE – R/C

T-fiTTiNG – R M





6017-06-02 WE 6 L 6 mm 1/8"- 27 NPT6017-08-04 WE 8 L 8 mm 1/4"- 18 NPT6017-10-04 WE 10 L 10 mm 1/4"-18 NPT6017-12-06 WE 12 L 12 mm 3/8"- 18 NPT6017-15-08 WE 15 L 15 mm 1/2"- 14 NPT6017-18-08 WE 18 L 18 mm 1/2"- 14 NPT6017-22-12 WE 22 L 22 mm 3/4"- 14 NPT6017-28-16 WE 28 L 28 mm 1"-11½ NPT6017-35-20 WE 35 L 35 mm 1 1/4"-11½ NPT6017-42-24 WE 42 L 42 mm 1 1/2"-11½ NPT

6517-06-04 WE 6 S 6 mm 1/4"- 18 NPT6517-08-04 WE 8 S 8 mm 1/4"- 18 NPT6517-10-06 WE 10 S 10 mm 3/8"- 18 NPT6517-12-06 WE 12 S 12 mm 3/8"- 18 NPT6517-14-08 WE 14 S 14 mm 1/2" - 14 NPT6517-16-08 WE 16 S 16 mm 1/2"- 14 NPT6517-20-12 WE 20 S 20 mm 3/4"- 14 NPT6517-25-16 WE 25 S 25 mm 1"-11½ NPT6517-30-20 WE 30 S 30 mm 1 1/4"-11½ NPT

6018-06-02 VEE 6 L 6 mm G 1/8"6018-08-04 VEE 8 L 8 mm G 1/4"6018-10-04 VEE 10 L 10 mm G 1/4"6018-12-06 VEE 12 L 12 mm G 3/8"6018-15-08 VEE 15 L 15 mm G 1/2"6018-18-08 VEE 18 L 18 mm G 1/2"6018-22-12 VEE 22 L 22 mm G 3/4"6018-28-16 VEE 28 L 28 mm G 1"6018-35-20 VEE 35 L 35 mm G 1 1/4"6018-42-24 VEE 42 L 42 mm G 1 1/2"

6518-06-04 VEE 6 S 6 mm G 1/4"6518-08-04 VEE 8 S 8 mm G 1/4"6518-10-06 VEE 10 S 10 mm G 3/8"6518-12-06 VEE 12 S 12 mm G 3/8"6518-14-08 VEE 14 S 14 mm G 1/2"6518-16-08 VEE 16 S 16 mm G 1/2"6518-20-12 VEE 20 S 20 mm G 3/4"6518-25-16 VEE 25 S 25 mm G 1"6518-30-20 VEE 30 S 30 mm G 1 1/4"6518-38-24 VEE 38 S 38 mm G 1 1/2"

6021-06-02 TE 6 L 6 mm R 1/8"6021-08-04 TE 8 L 8 mm R 1/4"6021-10-04 TE 10 L 10 mm R 1/4"6021-12-06 TE 12 L 12 mm R 3/8"6021-15-08 TE 15 L 15 mm R 1/2"6021-18-08 TE 18 L 18 mm R 1/2"

6521-06-04 TE 6 S 6 mm R 1/4"6521-08-04 TE 8 S 8 mm R 1/4"6521-10-06 TE 10 S 10 mm R 3/8"6521-12-06 TE 12 S 12 mm R 3/8"6521-14-08 TE 14 S 14 mm R 1/2"6521-16-08 TE 16 S 16 mm R 1/2"

6023TE – Gb

T-fiTTiNG – G M



6023-22-12 TE 22 L 22 mm G 3/4"6023-28-16 TE 28 L 28 mm G 1"6023-35-20 TE 35 L 35 mm G 1 1/4"6023-42-24 TE 42 L 42 mm G 1 1/2"

6523-20-12 TE 20 S 20 mm G 3/4"6523-25-16 TE 25 S 25 mm G 1"6523-30-20 TE 30 S 30 mm G 1 1/4"6523-38-24 TE 38 S 38 mm G 1 1/2"



6031LE – R/C

L-fiTTiNG – R M


6033LE – R/C

L-fiTTiNG – G M


6036LE – Mb

L-fiTTiNG – M M


6033LE – MK/C

L-fiTTiNG – MK M






6031-06-02 LE 6 L 6 mm R 1/8"6031-08-04 LE 8 L 8 mm R 1/4"6031-10-04 LE 10 L 10 mm R 1/4"6031-12-06 LE 12 L 12 mm R 3/8"6031-15-08 LE 15 L 15 mm R 1/2"6031-18-08 LE 18 L 18 mm R 1/2"

6531-06-04 LE6 S 6 mm R 1/4"6531-08-04 LE8 S 8 mm R 1/4"6531-10-06 LE10 S 10 mm R 3/8"6531-12-06 LE12 S 12 mm R 3/8"6531-14-08 LE14 S 14 mm R 1/2"6531-16-08 LE16 S 16 mm R 1/2"

6033-22-12 LE 22 L 22 mm G 3/4"6033-28-16 LE 28 L 28 mm G 1"6033-35-20 LE 35 L 35 mm G 1 1/4"6033-42-24 LE 42 L 42 mm G 1 1/2"

6533-20-12 LE 20 S 20 mm G 3/4"6533-25-16 LE 25 S 25 mm G 1"6533-30-20 LE 30 S 30 mm G 1 1/4"6533-38-24 LE 38 S 38 mm G 1 1/2"

6036-22-26 LE 22 L 22 mm M 26 x 1.56036-28-33 LE 28 L 28 mm M 33 x 2.06036-35-42 LE 35 L 35 mm M 42 x 2.06036-42-48 LE 42 L 42 mm M 48 x 2.0

6034-06-10 LE 6 L 6 mm M 10 x 1.0 k6034-08-12 LE 8 L 8 mm M 12 x 1.5 k6034-10-14 LE 10 L 10 mm M 14 x 1.5 k6034-12-16 LE 12 L 12 mm M 16 x 1.5 k6034-15-18 LE 15 L 15 mm M 18 x 1.5 k6034-18-22 LE 18 L 18 mm M 22 x 1.5 k

6035DKLO


6235DKLO–DKSO




6035-06-06 DKLO 6 x DKLO 6 6 mm6035-08-08 DKLO 8 x DKLO 8 8 mm6035-10-10 DKLO 10 x DKLO 10 10 mm6035-12-12 DKLO 12 x DKLO 12 12 mm6035-15-15 DKLO 15 x DKLO 15 15 mm6035-18-18 DKLO 18 x DKLO 18 18 mm6035-22-22 DKLO 22 x DKLO 22 22 mm6035-28-28 DKLO 28 x DKLO 28 28 mm6035-35-35 DKLO 35 x DKLO 35 35 mm6035-42-42 DKLO 42 x DKLO 42 42 mm

6535-06-06 DKSO 6 x DKSO 6 6 mm6535-08-08 DKSO 8 x DKSO 8 8 mm6535-10-10 DKSO 10 x DKSO 10 10 mm6535-12-12 DKSO 12 x DKSO 12 12 mm6535-14-14 DKSO 14 x DKSO 14 14 mm6535-16-16 DKSO 16 x DKSO 16 16 mm6535-20-20 DKSO 20 x DKSO 20 20 mm6535-25-25 DKSO 25 x DKSO 25 25 mm6535-30-30 DKSO 30 x DKSO 30 30 mm6535-38-38 DKSO 38 x DKSO 38 38 mm

6235-10-12 DKLO 10 x DKSO 12 10 mm-12 mm6235-10-14 DKLO 10 x DKSO 14 10 mm-14 mm6235-12-14 DKLO 12 x DKSO 14 12 mm-14 mm6235-12-16 DKLO 12 x DKSO 16 12 mm-16 mm6235-15-16 DKLO 15 x DKSO 16 15 mm-16 mm6235-15-20 DKLO 15 x DKSO 20 15 mm-20 mm6235-18-20 DKLO 18 x DKSO 20 18 mm-20 mm6235-18-25 DKLO 18 x DKSO 25 18 mm-25 mm



6

6041G


6042W

ELbOW jOiNT fiTTiNG

6043T

T-jOiNT fiTTiNG

6044K

CROSS jOiNT fiTTiNG





6041-06-06 G 6 L 6 mm6041-08-08 G 8 L 8 mm6041-10-10 G 10 L 10 mm6041-12-12 G 12 L 12 mm6041-15-15 G 15 L 15 mm6041-18-18 G 18 L 18 mm6041-22-22 G 22 L 22 mm6041-28-28 G 28 L 28 mm6041-35-35 G 35 L 35 mm6041-42-42 G 42 L 42 mm

6541-06-06 G 6 S 6 mm6541-08-08 G 8 S 8 mm6541-10-10 G 10 S 10 mm6541-12-12 G 12 S 12 mm6541-14-14 G 14 S 14 mm6541-16-16 G 16 S 16 mm6541-20-20 G 20 S 20 mm6541-25-25 G 25 S 25 mm6541-30-30 G 30 S 30 mm6541-38-38 G 38 S 38 mm

6042-06-06 W 6 L 6 mm6042-08-08 W 8 L 8 mm6042-10-10 W 10 L 10 mm6042-12-12 W 12 L 12 mm6042-15-15 W 15 L 15 mm6042-18-18 W 18 L 18 mm6042-22-22 W 22 L 22 mm6042-28-28 W 28 L 28 mm6042-35-35 W 35 L 35 mm6042-42-42 W 42 L 42 mm

6542-06-06 W 6 S 6 mm6542-08-08 W 8 S 8 mm6542-10-10 W 10 S 10 mm6542-12-12 W 12 S 12 mm6542-14-14 W 14 S 14 mm6542-16-16 W 16 S 16 mm6542-20-20 W 20 S 20 mm6542-25-25 W 25 S 25 mm6542-30-30 W 30 S 30 mm6542-38-38 W 38 S 38 mm

6043-06-06 T 6 L 6 mm6043-08-08 T 8 L 8 mm6043-10-10 T 10 L 10 mm6043-12-12 T 12 L 12 mm6043-15-15 T 15 L 15 mm6043-18-18 T 18 L 18 mm6043-22-22 T 22 L 22 mm6043-28-28 T 28 L 28 mm6043-35-35 T 35 L 35 mm6043-42-42 T 42 L 42 mm

6543-06-06 T 6 S 6 mm6543-08-08 T 8 S 8 mm6543-10-10 T 10 S 10 mm6543-12-12 T 12 S 12 mm6543-14-14 T 14 S 14 mm6543-16-16 T 16 S 16 mm6543-20-20 T 20 S 20 mm6543-25-25 T 25 S 25 mm6543-30-30 T 30 S 30 mm6543-38-38 T 38 S 38 mm

6044-06-06 K 6 L 6 mm6044-08-08 K 8 L 8 mm6044-10-10 K 10 L 10 mm6044-12-12 K 12 L 12 mm6044-15-15 K 15 L 15 mm6044-18-18 K 18 L 18 mm6044-22-22 K 22 L 22 mm6044-28-28 K 28 L 28 mm6044-35-35 K 35 L 35 mm6044-42-42 K 42 L 42 mm

6544-06-06 K 6 S 6 mm6544-08-08 K 8 S 8 mm6544-10-10 K 10 S 10 mm6544-12-12 K 12 S 12 mm6544-14-14 K 14 S 14 mm6544-16-16 K 16 S 16 mm6544-20-20 K 20 S 20 mm6544-25-25 K 25 S 25 mm6544-30-30 K 30 S 30 mm6544-38-38 K 38 S 38 mm



6045SV

bULKHEAD CONNECTiON

6046WSV

ELbOW bULKHEAD CONNECTiON

6048ESV

WELDiNG bULKHEAD CONNECTiON

6047AS

STRAiGHT WELDiNG bOSS

Part number Type Pipe size Bulk thread

Part number Type Pipe size Bulk thread Part number Type Pipe size Ø Ferrule

Part number Type Pipe size Ø Body

6045-06-06 SV 6 L 6 mm M 12 x 1.56045-08-08 SV 8 L 8 mm M 14 x 1.56045-10-10 SV 10 L 10 mm M 16 x 1.56045-12-12 SV 12 L 12 mm M 18 x 1.56045-15-15 SV 15 L 15 mm M 22 x 1.56045-18-18 SV 18 L 18 mm M 26 x 1.56045-22-22 SV 22 L 22 mm M 30 x 2.06045-28-28 SV 28 L 28 mm M 36 x 2.06045-35-35 SV 35 L 35 mm M 45 x 2.06045-42-42 SV 42 L 42 mm M 52 x 2.0

6545-06-06 SV 6 S 6 mm M 14 x 1.56545-08-08 SV 8 S 8 mm M 16 x 1.56545-10-10 SV 10 S 10 mm M 18 x 1.56545-12-12 SV 12 S 12 mm M 20 x 1.56545-14-14 SV 14 S 14 mm M 22 x 1.56545-16-16 SV 16 S 16 mm M 24 x 1.56545-20-20 SV 20 S 20 mm M 30 x 2.06545-25-25 SV 25 S 25 mm M 36 x 2.06545-30-30 SV 30 S 30 mm M 42 x 2.06545-38-38 SV 38 S 38 mm M 52 x 2.0

6046-06-06 WSV 6 L 6 mm M 12 x 1.56046-08-08 WSV 8 L 8 mm M 14 x 1.56046-10-10 WSV 10 L 10 mm M 16 x 1.56046-12-12 WSV 12 L 12 mm M 18 x 1.56046-15-15 WSV 15 L 15 mm M 22 x 1.56046-18-18 WSV 18 L 18 mm M 26 x 1.56046-22-22 WSV 22 L 22 mm M 30 x 2.06046-28-28 WSV 28 L 28 mm M 36 x 2.06046-35-35 WSV 35 L 35 mm M 45 x 2.06046-42-42 WSV 42 L 42 mm M 52 x 2.0

6546-06-06 WSV 6 S 6 mm M 14 x 1.56546-08-08 WSV 8 S 8 mm M 16 x 1.56546-10-10 WSV 10 S 10 mm M 18 x 1.56546-12-12 WSV 12 S 12 mm M 20 x 1.56546-14-14 WSV 14 S 14 mm M 22 x 1.56546-16-16 WSV 16 S 16 mm M 24 x 1.56546-20-20 WSV 20 S 20 mm M 30 x 2.06546-25-25 WSV 25 S 25 mm M 36 x 2.06546-30-30 WSV 30 S 30 mm M 42 x 2.06546-38-38 WSV 38 S 38 mm M 52 x 2.0

6048-06-06 ESV 6 L 6 mm 18 mm6048-08-08 ESV 8 L 8 mm 20 mm6048-10-10 ESV 10 L 10 mm 22 mm6048-12-12 ESV 12 L 12 mm 25 mm6048-15-15 ESV 15 L 15 mm 28 mm6048-18-18 ESV 18 L 18 mm 32 mm6048-22-22 ESV 22 L 22 mm 36 mm6048-28-28 ESV 28 L 28 mm 40 mm6048-35-35 ESV 35 L 35 mm 50 mm6048-42-42 ESV 42 L 42 mm 60 mm

6548-06-06 ESV 6 S 6 mm 20 mm6548-08-08 ESV 8 S 8 mm 22 mm6548-10-10 ESV 10 S 10 mm 25 mm6548-12-12 ESV 12 S 12 mm 28 mm6548-14-14 ESV 14 S 14 mm 30 mm6548-16-16 ESV 16 S 16 mm 35 mm6548-20-20 ESV 20 S 20 mm 38 mm6548-25-25 ESV 25 S 25 mm 45 mm6548-30-30 ESV 30 S 30 mm 50 mm6548-38-38 ESV 38 S 38 mm 60 mm

6047-06-06 AS 6 L 6 mm 10 mm6047-08-08 AS 8 L 8 mm 12 mm6047-10-10 AS 10 L 10 mm 14 mm6047-12-12 AS 12 L 12 mm 16 mm6047-15-15 AS 15 L 15 mm 19 mm6047-18-18 AS 18 L 18 mm 22 mm6047-22-22 AS 22 L 22 mm 27 mm6047-28-28 AS 28 L 28 mm 32 mm6047-35-35 AS 35 L 35 mm 40 mm6047-42-42 AS42 L 42 mm 46 mm

6547-06-06 AS 6 S 6 mm 11 mm6547-08-08 AS 8 S 8 mm 13 mm6547-10-10 AS 10 S 10 mm 15 mm6547-12-12 AS 12 S 12 mm 17 mm6547-14-14 AS 14 S 14 mm 19 mm6547-16-16 AS 16 S 16 mm 21 mm6547-20-20 AS 20 S 20 mm 26 mm6547-25-25 AS 25 S 25 mm 31 mm6547-30-30 AS 30 S 30 mm 36 mm6547-38-38 AS 38 S 38 mm 44 mm



6

6049WAS

ELbOW WELDiNG fiTTiNG

Part number Type Pipe size Ø Body

6049-06-06 WAS 6 L 6 mm 10 mm6049-08-08 WAS 8 L 8 mm 12 mm6049-10-10 WAS 10 L 10 mm 14 mm6049-12-12 WAS 12 L 12 mm 16 mm6049-15-15 WAS 15 L 15 mm 19 mm6049-18-18 WAS 18 L 18 mm 22 mm6049-22-22 WAS 22 L 22 mm 27 mm6049-28-28 WAS 28 L 28 mm 32 mm6049-35-35 WAS 35 L 35 mm 40 mm6049-42-42 WAS 42 L 42 mm 46 mm

6549-06-06 WAS 6 S 6 mm 11 mm6549-08-08 WAS 8 S 8 mm 13 mm6549-10-10 WAS 10 S 10 mm 15 mm6549-12-12 WAS 12 S 12 mm 17 mm6549-14-14 WAS 14 S 14 mm 19 mm6549-16-16 WAS 16 S 16 mm 21 mm6549-20-20 WAS 20 S 20 mm 26 mm6549-25-25 WAS 25 S 25 mm 31 mm6549-30-30 WAS 30 S 30 mm 36 mm6549-38-38 WAS 38 S 38 mm 44 mm

6050EVW

ADjUSTAbLE ELbOW fiTTiNG


6050-06-06 EVW 6 L 6 mm6050-08-08 EVW 8 L 8 mm6050-10-10 EVW 10 L 10 mm6050-12-12 EVW 12 L 12 mm6050-15-15 EVW 15 L 15 mm6050-18-18 EVW 18 L 18 mm6050-22-22 EVW 22 L 22 mm6050-28-28 EVW 28 L 28 mm6050-35-35 EVW 35 L 35 mm6050-42-42 EVW 42 L 42 mm

6550-06-06 EVW 6 S 6 mm6550-08-08 EVW 8 S 8 mm6550-10-10 EVW 10 S 10 mm6550-12-12 EVW 12 S 12 mm6550-14-14 EVW 14 S 14 mm6550-16-16 EVW 16 S 16 mm6550-20-20 EVW 20 S 20 mm6550-25-25 EVW 25 S 25 mm6550-30-30 EVW 30 S 30 mm6550-38-38 EVW 38 S 38 mm

6051EVWO

ADjUSTAbLE ELbOW fiTTiNG

With O-ring

6060EVT

ADjUSTAbLE T-fiTTiNG



6051-06-06 EVWO 6 L 6 mm6051-08-08 EVWO 8 L 8 mm6051-10-10 EVWO 10 L 10 mm6051-12-12 EVWO 12 L 12 mm6051-15-15 EVWO 15 L 15 mm6051-18-18 EVWO 18 L 18 mm6051-22-22 EVWO 22 L 22 mm6051-28-28 EVWO 28 L 28 mm6051-35-35 EVWO 35 L 35 mm6051-42-42 EVWO 42 L 42 mm

6551-06-06 EVWO 6 S 6 mm6551-08-08 EVWO 8 S 8 mm6551-10-10 EVWO 10 S 10 mm6551-12-12 EVWO 12 S 12 mm6551-14-14 EVWO 14 S 14 mm6551-16-16 EVWO 16 S 16 mm6551-20-20 EVWO 20 S 20 mm6551-25-25 EVWO 25 S 25 mm6551-30-30 EVWO 30 S 30 mm6551-38-38 EVWO 38 S 38 mm

6060-06-06 EVT 6 L 6 mm6060-08-08 EVT 8 L 8 mm6060-10-10 EVT 10 L 10 mm6060-12-12 EVT 12 L 12 mm6060-15-15 EVT 15 L 15 mm6060-18-18 EVT 18 L 18 mm6060-22-22 EVT 22 L 22 mm6060-28-28 EVT 28 L 28 mm6060-35-35 EVT 35 L 35 mm6060-42-42 EVT 42 L 42 mm

6560-06-06 EVT 6 S 6 mm6560-08-08 EVT 8 S 8 mm6560-10-10 EVT 10 S 10 mm6560-12-12 EVT 12 S 12 mm6560-14-14 EVT 14 S 14 mm6560-16-16 EVT 16 S 16 mm6560-20-20 EVT 20 S 20 mm6560-25-25 EVT 25 S 25 mm6560-30-30 EVT 30 S 30 mm6560-38-38 EVT 38 S 38 mm

DISCO

NTINUED

TYPE

DISCO

NTINUED

TYPE



6061EVTO

ADjUSTAbLE T-fiTTiNG

With O-ring

6070EVL

ADjUSTAbLE L-fiTTiNG

6071EVL

ADjUSTAbLE L-fiTTiNG

With O-ring




6061-06-06 EVTO 6 L 6 mm6061-08-08 EVTO 8 L 8 mm6061-10-10 EVTO 10 L 10 mm6061-12-12 EVTO 12 L 12 mm6061-15-15 EVTO 15 L 15 mm6061-18-18 EVTO 18 L 18 mm6061-22-22 EVTO 22 L 22 mm6061-28-28 EVTO 28 L 28 mm6061-35-35 EVTO 35 L 35 mm6061-42-42 EVTO 42 L 42 mm

6561-06-06 EVTO 6 S 6 mm6561-08-08 EVTO 8 S 8 mm6561-10-10 EVTO 10 S 10 mm6561-12-12 EVTO 12 S 12 mm6561-14-14 EVTO 14 S 14 mm6561-16-16 EVTO 16 S 16 mm6561-20-20 EVTO 20 S 20 mm6561-25-25 EVTO 25 S 25 mm6561-30-30 EVTO 30 S 30 mm6561-38-38 EVTO 38 S 38 mm

6070-06-06 EVL 6 L 6 mm6070-08-08 EVL 8 L 8 mm6070-10-10 EVL 10 L 10 mm6070-12-12 EVL 12 L 12 mm6070-15-15 EVL 15 L 15 mm6070-18-18 EVL 18 L 18 mm6070-22-22 EVL 22 L 22 mm6070-28-28 EVL 28 L 28 mm6070-35-35 EVL 35 L 35 mm6070-42-42 EVL 42 L 42 mm

6570-06-06 EVL 6 S 6 mm6570-08-08 EVL 8 S 8 mm6570-10-10 EVL 10 S 10 mm6570-12-12 EVL 12 S 12 mm6570-14-14 EVL 14 S 14 mm6570-16-16 EVL 16 S 16 mm6570-20-20 EVL 20 S 20 mm6570-25-25 EVL 25 S 25 mm6570-30-30 EVL 30 S 30 mm6570-38-38 EVL 38 S 38 mm

6071-06-06 EVLO 6 L 6 mm6071-08-08 EVLO 8 L 8 mm6071-10-10 EVLO 10 L 10 mm6071-12-12 EVLO 12 L 12 mm6071-15-15 EVLO 15 L 15 mm6071-18-18 EVLO 18 L 18 mm6071-22-22 EVLO 22 L 22 mm6071-28-28 EVLO 28 L 28 mm6071-35-35 EVLO 35 L 35 mm6071-42-42 EVLO 42 L 42 mm

6571-06-06 EVLO 6 S 6 mm6571-08-08 EVLO 8 S 8 mm6571-10-10 EVLO 10 S 10 mm6571-12-12 EVLO 12 S 12 mm6571-14-14 EVLO 14 S 14 mm6571-16-16 EVLO 16 S 16 mm6571-20-20 EVLO 20 S 20 mm6571-25-25 EVLO 25 S 25 mm6571-30-30 EVLO 30 S 30 mm6571-38-38 EVLO 38 S 38 mm

DISCO

NTINUED

TYPE



6

6083EVGE–Gb

STRAiGHT STANDPiPE

With pre-assembled nut, cutting edge. ISO 1179-4

6089EVGE–ED

STRAiGHT STANDPiPE

With pre-assembled nut. ED sealing. ISO 1179-2


6083-06-02 EVGE 6 L 6 mm G 1/8"6083-06-04 EVGE 6 L 6 mm G 1/4"6083-08-04 EVGE8 L 8 mm G 1/4"6083-10-04 EVGE 10 L 10 mm G 1/4"6083-12-04 EVGE 12 L 12 mm G 1/4"6083-12-06 EVGE 12 L 12 mm G 3/8"6083-12-08 EVGE 12 L 12 mm G 1/2"6083-15-08 EVGE 15 L 15 mm G 1/2"6083-18-08 EVGE 18 L 18 mm G 1/2"6083-18-12 EVGE 18 L 18 mm G 3/4"6083-22-08 EVGE 22 L 22 mm G 1/2"6083-22-12 EVGE 22 L 22 mm G 3/4"6083-28-16 EVGE 28 L 28 mm G 1"6083-35-20 EVGE 35 L 35 mm G 1 1/4"6083-42-24 EVGE 42 L 42 mm G 1 1/2"

6583-06-04 EVGE 6 S 6 mm G 1/4"6583-08-04 EVGE 8 S 8 mm G 1/4"6583-10-04 EVGE 10 S 10 mm G 1/4"6583-10-06 EVGE 10 S 10 mm G 3/8"6583-12-06 EVGE 12 S 12 mm G 3/8"6583-12-08 EVGE 12 S 12 mm G 1/2"6583-14-08 EVGE 14 S 14 mm G 1/2"6583-16-08 EVGE 16 S 16 mm G 1/2"6583-16-12 EVGE 16 S 16 mm G 3/4"6583-20-12 EVGE 20 S 20 mm G 3/4"6583-25-12 EVGE 25 S 25 mm G 3/4"6583-25-16 EVGE 25 S 25 mm G 1"6583-30-20 EVGE 30 S 30 mm G 1 1/4"6583-38-24 EVGE 38 S 38 mm G 1 1/2"

6089-06-02 EVGE 6 L 6 mm G 1/8"6089-08-04 EVGE 8 L 8 mm G 1/4"6089-10-04 EVGE 10 L 10 mm G 1/4"6089-10-06 EVGE 10 L 10 mm G 3/8"6089-12-04 EVGE 12 L 12 mm G 1/4"6089-12-06 EVGE 12 L 12 mm G 3/8"6089-12-08 EVGE 12 L 12 mm G 1/2"6089-15-08 EVGE 15 L 15 mm G 1/2"6089-18-08 EVGE 18 L 18 mm G 1/2"6089-22-12 EVGE 22 L 22 mm G 3/4"6089-28-16 EVGE 28 L 28 mm G 1"6089-35-20 EVGE 35 L 35 mm G 1 1/4"6089-42-24 EVGE 42 L 42 mm G 1 1/2"

6589-06-04 EVGE 6 S 6 mm G 1/4"6589-08-04 EVGE 8 S 8 mm G 1/4"6589-10-06 EVGE 10 S 10 mm G 3/8"6589-12-06 EVGE 12 S 12 mm G 3/8"6589-12-08 EVGE 12 S 12 mm G 1/2"6589-14-08 EVGE 14 S 14 mm G 1/2"6589-16-08 EVGE 16 S 16 mm G 1/2"6589-20-12 EVGE 20 S 20 mm G 3/4"6589-25-16 EVGE 25 S 25 mm G 1"6589-30-20 EVGE 30 S 30 mm G 1 1/4"6589-38-24 EVGE 38 S 38 mm G 1 1/2"




6090EVGEO – G/ED

STRAiGHT STANDPiPEWith pre-assembled nut and O-ring.


6092EVGEO – M/ED

STRAiGHT STANDPiPE

With pre-assembled nut and O-ring. ED sealing. ISO 9974-2



6090-06-02 EVGEO 6 L 6 mm G 1/8"6090-06-04 EVGEO 6 L 6 mm G 1/4"6090-08-04 EVGEO 8 L 8 mm G 1/4"6090-10-04 EVGEO 10 L 10 mm G 1/4"6090-10-06 EVGEO 10 L 10 mm G 3/8"6090-12-04 EVGEO 12 L 12 mm G 1/4"6090-12-06 EVGEO 12 L 12 mm G 3/8"6090-12-08 EVGEO 12 L 12 mm G 1/2"6090-15-08 EVGEO 15 L 15 mm G 1/2"6090-18-08 EVGEO 18 L 18 mm G 1/2"6090-22-12 EVGEO 22 L 22 mm G 3/4"6090-28-16 EVGEO 28 L 28 mm G 1"6090-35-20 EVGEO 35 L 35 mm G 1 1/4"6090-42-24 EVGEO 42 L 42 mm G 1 1/2"

6590-06-04 EVGEO 6 S 6 mm G 1/4"6590-08-04 EVGEO 8 S 8 mm G 1/4"6590-10-04 EVGEO 10 S 10 mm G 1/4"6590-10-06 EVGEO 10 S 10 mm G 3/8"6590-12-06 EVGEO 12 S 12 mm G 3/8"6590-12-08 EVGEO 12 S 12 mm G 1/2"6590-14-08 EVGEO 14 S 14 mm G 1/2"6590-16-08 EVGEO 16 S 16 mm G 1/2"6590-16-12 EVGEO 16 S 16 mm G 3/4"6590-20-12 EVGEO 20 S 20 mm G 3/4"6590-25-12 EVGEO 25 S 25 mm G 3/4"6590-25-16 EVGEO 25 S 25 mm G 1"6590-30-20 EVGEO 30 S 30 mm G 1 1/4"6590-38-24 EVGEO 38 S 38 mm G 1 1/2"

6092-06-10 EVGEO 6 L 6 mm M 10 x 1.06092-08-12 EVGEO 8 L 8 mm M 12 x 1.56092-10-14 EVGEO 10 L 10 mm M 14 x 1.56092-12-16 EVGEO 12 L 12 mm M 16 x 1.56092-15-18 EVGEO 15 L 15 mm M 18 x 1.56092-18-22 EVGEO 18 L 18 mm M 22 x 1.56092-22-26 EVGEO 22 L 22 mm M 26 x 1.56092-28-33 EVGEO 28 L 28 mm M 33 x 2.06092-35-42 EVGEO 35 L 35 mm M 42 x 2.06092-42-48 EVGEO 42 L 42 mm M 48 x 2.0

6592-06-12 EVGEO 6 S 6 mm M 12 x 1.56592-08-14 EVGEO 8 S 8 mm M 14 x 1.56592-10-16 EVGEO 10 S 10 mm M 16 x 1.56592-12-18 EVGEO 12 S 12 mm M 18 x 1.56592-14-20 EVGEO 14 S 14 mm M 20 x 1.56592-16-22 EVGEO 16 S 16 mm M 22 x 1.56592-20-27 EVGEO 20 S 20 mm M 27 x 2.06592-25-33 EVGEO 25 S 25 mm M 33 x 2.06592-30-42 EVGEO 30 S 30 mm M 42 x 2.06592-38-48 EVGEO 38 S 38 mm M 48 x 2.0

6101GAi – G

STRAiGHT fiTTiNG – G f


6101-06-02 GAI 6 L 6 mm G 1/8"6101-08-04 GAI 8 L 8 mm G 1/4"6101-08-06 GAI 8 L 8 mm G 3/8"6101-10-04 GAI 10 L 10 mm G 1/4"6101-12-04 GAI 12 L 12 mm G 1/4"6101-12-06 GAI 12 L 12 mm G 3/8"6101-12-08 GAI 12 L 12 mm G 1/2"6101-15-08 GAI 15 L 15 mm G 1/2"6101-18-08 GAI 18 L 18 mm G 1/2"6101-22-12 GAI 22 L 22 mm G 3/4"6101-28-16 GAI 28 L 28 mm G 1"6101-35-20 GAI 35 L 35 mm G 1 1/4"6101-42-24 GAI 42 L 42 mm G 1 1/2"

6601-06-04 GAI 6 S 6 mm G 1/4"6601-08-04 GAI 8 S 8 mm G 1/4"6601-10-06 GAI 10 S 10 mm G 3/8"6601-12-06 GAI 12 S 12 mm G 3/8"6601-14-08 GAI 14 S 14 mm G 1/2"6601-16-08 GAI 16 S 16 mm G 1/2"6601-20-12 GAI 20 S 20 mm G 3/4"6601-25-16 GAI 25 S 25 mm G 1"6601-30-20 GAI 30 S 30 mm G 1 1/4"6601-38-24 GAI 38 S 38 mm G 1 1/2"

6102GAi – M

STRAiGHT fiTTiNG – M f


6102-06-10 GAI 6 L 6 mm M 10 x 1.06102-08-12 GAI 8 L 8 mm M 12 x 1.56102-10-14 GAI 10 L 10 mm M 14 x 1.56102-12-16 GAI 12 L 12 mm M 16 x 1.56102-15-18 GAI 15 L 15 mm M 18 x 1.56102-18-22 GAI 18 L 18 mm M 22 x 1.56102-22-26 GAI 22 L 22 mm M 26 x 1.5

6602-06-12 GAI 6 S 6 mm M 12 x 1.56602-08-14 GAI 8 S 8 mm M 14 x 1.56602-10-16 GAI 10 S 10 mm M 16 x 1.56602-12-18 GAI 12 S 12 mm M 18 x 1.56602-14-20 GAI 14 S 14 mm M 20 x 1.56602-16-22 GAI 16 S 16 mm M 22 x 1.56602-20-27 GAI 20 S 20 mm M 27 x 2.0




6

6103MAV – G

MANOMETER – fiTTiNG

Cutting edge ring

6104MAV – EV – G MANOMETER

Pre-assembled fitting

LOOSE CUTTiNG EDGE RiNGS fOR MAV




6103-06-04 MAV 6 L 6 mm G 1/4"6103-08-04 MAV 8 L 8 mm G 1/4"6103-10-04 MAV 10 L 10 mm G 1/4"6103-12-04 MAV 12 L 12 mm G 1/4"

6603-06-08 MAV 6 S 6 mm G 1/2"6603-08-04 MAV 8 S 8 mm G 1/4"6603-08-08 MAV 8 S 8 mm G 1/2"6603-10-08 MAV 10 S 10 mm G 1/2"6603-12-08 MAV 12 S 12 mm G 1/2"

6104-06-04 MAV-EV 6 L 6 mm G 1/4"6104-08-04 MAV-EV 8 L 8 mm G 1/4"6104-10-04 MAV-EV 10 L 10 mm G 1/4"6104-12-04 MAV-EV 12 L 12 mm G 1/4"

6604-06-08 MAV-EV 6 S 6 mm G 1/2"6604-08-08 MAV-EV 8 S 8 mm G 1/2"6604-10-08 MAV-EV 10 S 10 mm G 1/2"6604-12-08 MAV-EV 12 S 12 mm G 1/2"

6103-13-04 Cutting edge ring 1/4"6603-13-08 Cutting edge ring 1/2"

6105RED

REDUCTiON – fiTTiNG


6105-08-06 RED 8/6 L 8 mm-6 mm6105-10-06 RED 10/6 L 10 mm-6 mm6105-10-08 RED 10/8 L 10 mm-8 mm6105-12-06 RED 12/6 L 12 mm-6 mm6105-12-08 RED 12/8 L 12 mm-8 mm6105-12-10 RED 12/10 L 12 mm-10 mm6105-15-06 RED 15/6 L 15 mm-6 mm6105-15-08 RED 15/8 L 15 mm-8 mm6105-15-10 RED 15/10 L 15 mm-10 mm6105-15-12 RED 15/12 L 15 mm-12 mm6105-18-08 RED 18/8 L 18 mm-8 mm6105-18-10 RED 18/10 L 18 mm-10 mm6105-18-12 RED 18/12 L 18 mm-12 mm6105-18-15 RED 18/15 L 18 mm-15 mm6105-22-12 RED 22/12 L 22 mm-12 mm6105-22-15 RED 22/15 L 22 mm-15 mm6105-22-18 RED 22/18 L 22 mm-18 mm6105-28-10 RED 28/10 L 28 mm-10 mm6105-28-15 RED 28/15 L 28 mm-15 mm6105-28-18 RED 28/18 L 28 mm-18 mm6105-28-22 RED 28/22 L 28 mm-22 mm6105-35-22 RED 35/22 L 35 mm-22 mm6105-35-28 RED 35/28 L 35 mm-28 mm

6605-08-06 RED 8/6 S 8 mm-6 mm6605-10-06 RED 10/6 S 10 mm-6 mm6605-10-08 RED 10/8 S 10 mm-8 mm6605-12-06 RED 12/6 S 12 mm-6 mm6605-12-08 RED 12/8 S 12 mm-8 mm6605-12-10 RED 12/10 S 12 mm-10 mm6605-14-10 RED 14/10 S 14 mm-10 mm6605-14-12 RED 14/12 S 14 mm-12 mm6605-16-10 RED 16/10 S 16 mm-10 mm6605-16-12 RED 16/12 S 16 mm-12 mm6605-16-14 RED 16/14 S 16 mm-14 mm6605-20-10 RED 20/10 S 20 mm-10 mm6605-20-12 RED 20/12 S 20 mm-12 mm6605-20-14 RED 20/14 S 20 mm-14 mm6605-20-16 RED 20/16 S 20 mm-16 mm6605-25-16 RED 25/16 S 25 mm-16 mm6605-25-20 RED 25/20 S 25 mm-20 mm6605-30-20 RED 30/20 S 30 mm-20 mm6605-30-25 RED 30/25 S 30 mm-25 mm6605-38-25 RED 38/25 S 38 mm-25 mm6605-38-30 RED 38/30 S 38 mm-30 mm



6107KOR – L

REDUCTiON

Pre-assembled nut

6109KORO – L

STRAiGHT REDUCTiON

With O-ring

Part number Type Pipe size Part number Type Pipe size

6107-08-06 KOR 8/6 L 8 mm-6 mm6107-10-06 KOR 10/6 L 10 mm-6 mm6107-10-08 KOR10/8 L 10 mm-8 mm6107-12-06 KOR 12/6 L 12 mm-6 mm6107-12-08 KOR 12/8 L 12 mm-8 mm6107-12-10 KOR 12/10 L 12 mm-10 mm6107-15-06 KOR 15/6 L 15 mm-6 mm6107-15-08 KOR 15/8 L 15 mm-8 mm6107-15-10 KOR 15/10 L 15 mm-10 mm6107-15-12 KOR 15/12 L 15 mm-12 mm6107-18-06 KOR 18/6 L 18 mm-6 mm6107-18-08 KOR 18/8 L 18 mm-8 mm6107-18-10 KOR 18/10 L 18 mm-10 mm6107-18-12 KOR 18/12 L 18 mm-12 mm6107-18-15 KOR 18/15 L 18 mm-15 mm6107-22-06 KOR 22/6 L 22 mm-6 mm6107-22-08 KOR 22/8 L 22 mm-8 mm6107-22-10 KOR 22/10 L 22 mm-10 mm6107-22-12 KOR 22/12 L 22 mm-12 mm6107-22-15 KOR 22/15 L 22 mm-15 mm6107-22-18 KOR 22/18 L 22 mm-18 mm6107-28-06 KOR 28/6 L 28 mm-6 mm6107-28-08 KOR 28/8 L 28 mm-8 mm6107-28-10 KOR 28/10 L 28 mm-10 mm6107-28-12 KOR 28/12 L 28 mm-12 mm6107-28-15 KOR 28/15 L 28 mm-15 mm6107-28-18 KOR 28/18 L 28 mm-18 mm6107-28-22 KOR 28/22 L 28 mm-22 mm6107-35-06 KOR 35/6 L 35 mm-6 mm6107-35-08 KOR 35/8 L 35 mm-8 mm6107-35-10 KOR 35/10 L 35 mm-10 mm6107-35-12 KOR 35/12 L 35 mm-12 mm6107-35-15 KOR 35/15 L 35 mm-15 mm6107-35-18 KOR 35/18 L 35 mm-18 mm6107-35-22 KOR 35/22 L 35 mm-22 mm6107-35-28 KOR 35/28 L 35 mm-28 mm6107-42-10 KOR 42/10 L 42 mm-10 mm6107-42-12 KOR 42/12 L 42 mm-12 mm6107-42-15 KOR 42/15 L 42 mm-15 mm6107-42-18 KOR 42/18 L 42 mm-18 mm6107-42-22 KOR 42/22 L 42 mm-22 mm6107-42-28 KOR 42/28 L 42 mm-28 mm6107-42-35 KOR 42/35 L 42 mm-35 mm

6109-08-06 KOR O 8/6 L 8 mm-6 mm6109-10-06 KOR O 10/6 L 10 mm-6 mm6109-10-08 KOR O 10/8 L 10 mm-8 mm6109-12-06 KOR O 12/6 L 12 mm-6 mm6109-12-08 KOR O 12/8 L 12 mm-8 mm6109-12-10 KOR O 12/10 L 12 mm-10 mm6109-15-06 KOR O 15/6 L 15 mm-6 mm6109-15-08 KOR O 15/8 L 15 mm-8 mm6109-15-10 KOR O 15/10 L 15 mm-10 mm6109-15-12 KOR O 15/12 L 15 mm-12 mm6109-18-06 KOR O 18/6 L 18 mm-6 mm6109-18-08 KOR O 18/8 L 18 mm-8 mm6109-18-10 KOR O 18/10 L 18 mm-10 mm6109-18-12 KOR O 18/12 L 18 mm-12 mm6109-18-15 KOR O 18/15 L 18 mm-15 mm6109-22-06 KOR O 22/6 L 22 mm-6 mm6109-22-08 KOR O 22/8 L 22 mm-8 mm6109-22-10 KOR O 22/10 L 22 mm-10 mm6109-22-12 KOR O 22/12 L 22 mm-12 mm6109-22-15 KOR O 22/15 L 22 mm-15 mm6109-22-18 KOR O 22/18 L 22 mm-18 mm6109-28-06 KOR O 28/6 L 28 mm-6 mm6109-28-08 KOR O 28/8 L 28 mm-8 mm6109-28-10 KOR O 28/10 L 28 mm-10 mm6109-28-12 KOR O 28/12 L 28 mm-12 mm6109-28-15 KOR O 28/15 L 28 mm-15 mm6109-28-18 KOR O 28/18 L 28 mm-18 mm6109-28-22 KOR O 28/22 L 28 mm-22 mm6109-35-06 KOR O 35/6 L 35 mm-6 mm6109-35-08 KOR O 35/8 L 35 mm-8 mm6109-35-10 KOR O 35/10 L 35 mm-10 mm6109-35-12 KOR O 35/12 L 35 mm-12 mm6109-35-15 KOR O 35/15 L 35 mm-15 mm6109-35-18 KOR O 35/18 L 35 mm-18 mm6109-35-22 KOR O 35/22 L 35 mm-22 mm6109-35-28 KOR O 35/28 L 35 mm-28 mm6109-42-06 KOR O 42/6 L 42 mm-6 mm6109-42-08 KOR O 42/8 L 42 mm-8 mm6109-42-10 KOR O 42/10 L 42 mm-10 mm6109-42-12 KOR O 42/12 L 42 mm-12 mm6109-42-15 KOR O 42/15 L 42 mm-15 mm6109-42-18 KOR O 42/18 L 42 mm-18 mm6109-42-22 KOR O 42/22 L 42 mm-22 mm6109-42-28 KOR O 42/28 L 42 mm-28 mm6109-42-35 KOR O 42/35 L 42 mm-35 mm

DISCO

NTINUED

TYPE



6

6607KOR – S

REDUCTiON

Pre-assembled nut

6609KORO – S

STRAiGHT REDUCTiON

With O-ring


6607-08-06 KOR 8/6 S 8 mm-6 mm6607-10-06 KOR 10/6 S 10 mm- 6 mm6607-10-08 KOR 10/8 S 10 mm-8 mm6607-12-06 KOR 12/6 S 12 mm-6 mm6607-12-08 KOR 12/8 S 12 mm-8 mm6607-12-10 KOR 12/10 S 12 mm-10 mm6607-14-06 KOR 14/6 S 14 mm-6 mm6607-14-08 KOR 14/8 S 14 mm-8 mm6607-14-10 KOR 14/10 S 14 mm-10 mm6607-14-12 KOR 14/12 S 14 mm-12 mm6607-16-06 KOR 16/6 S 16 mm-6 mm6607-16-08 KOR 16/8 S 16 mm-8 mm6607-16-10 KOR 16/10 S 16 mm-10 mm6607-16-12 KOR 16/12 S 16 mm-12 mm6607-16-14 KOR 16/14 S 16 mm-14 mm6607-20-06 KOR 20/6 S 20 mm-6 mm6607-20-08 KOR 20/8 S 20 mm-8 mm6607-20-10 KOR 20/10 S 20 mm-10 mm6607-20-12 KOR 20/12 S 20 mm-12 mm6607-20-14 KOR 20/14 S 20 mm-14 mm6607-20-16 KOR 20/16 S 20 mm-16 mm6607-25-06 KOR 25/6 S 25 mm-6 mm6607-25-08 KOR 25/8 S 25 mm-8 mm6607-25-10 KOR 25/10 S 25 mm-10 mm6607-25-12 KOR 25/12 S 25 mm-12 mm6607-25-14 KOR 25/14 S 25 mm-14 mm6607-25-16 KOR 25/16 S 25 mm-16 mm6607-25-20 KOR 25/20 S 25 mm-20 mm6607-30-06 KOR 30/6 S 30 mm-6 mm6607-30-08 KOR 30/8 S 30 mm-8 mm6607-30-10 KOR 30/10 S 30 mm-10 mm6607-30-12 KOR 30/12 S 30 mm-12 mm6607-30-14 KOR 30/14 S 30 mm-14 mm6607-30-16 KOR 30/16 S 30 mm-16 mm6607-30-20 KOR 30/20 S 30 mm-20 mm6607-30-25 KOR 30/25 S 30 mm-25 mm6607-38-06 KOR 38/6 S 38 mm-6 mm6607-38-08 KOR 38/8 S 38 mm-8 mm6607-38-10 KOR 38/10 S 38 mm-10 mm6607-38-12 KOR 38/12 S 38 mm-12 mm6607-38-14 KOR 38/14 S 38 mm-14 mm6607-38-16 KOR 38/16 S 38 mm-16 mm6607-38-20 KOR 38/20 S 38 mm-20 mm6607-38-25 KOR 38/25 S 38 mm-25 mm6607-38-30 KOR 38/30 S 38 mm-30 mm

6609-08-06 KOR O 8/6 S 8 mm-6 mm6609-10-06 KOR O 10/6 S 10 mm-6 mm6609-10-08 KOR O 10/8 S 10 mm- 8 mm6609-12-06 KOR O 12/6 S 12 mm-6 mm6609-12-08 KOR O 12/8 S 12 mm-8 mm6609-12-10 KOR O12/10 S 12 mm-10 mm6609-14-06 KOR O 14/6 S 14 mm-6 mm6609-14-08 KOR O 14/8 S 14 mm-8 mm6609-14-10 KOR O 14/10 S 14 mm-10 mm6609-14-12 KOR O 14/12 S 14 mm-12 mm6609-16-06 KOR O 16/6 S 16 mm-6 mm6609-16-08 KOR O 16/8 S 16 mm-8 mm6609-16-10 KOR O 16/10 S 16 mm-10 mm6609-16-12 KOR O 16/12 S 16 mm-12 mm6609-16-14 KOR O 16/14 S 16 mm-14 mm6609-20-06 KOR O 20/6 S 20 mm-6 mm6609-20-08 KOR O 20/8 S 20 mm-8 mm6609-20-10 KOR O 20/10 S 20 mm-10 mm6609-20-12 KOR O 20/12 S 20 mm-12 mm6609-20-14 KOR O 20/14 S 20 mm-14 mm6609-20-16 KOR O 20/16 S 20 mm-16 mm6609-25-06 KOR O 25/6 S 25 mm-6 mm6609-25-08 KOR O 25/8 S 25 mm-8 mm6609-25-10 KOR O 25/10 S 25 mm-10 mm6609-25-12 KOR O 25/12 S 25 mm-12 mm6609-25-14 KOR O 25/14 S 25 mm-14 mm6609-25-16 KOR O 25/16 S 25 mm-16 mm6609-25-20 KOR O 25/20 S 25 mm-20 mm6609-30-08 KOR O 30/8 S 30 mm-8 mm6609-30-10 KOR O 30/10 S 30 mm-10 mm6609-30-12 KOR O 30/12 S 30 mm-12 mm6609-30-16 KOR O 30/16 S 30 mm-16 mm6609-30-20 KOR O 30/20 S 30 mm-20 mm6609-30-25 KOR O 30/25 S 30 mm-25 mm6609-38-08 KOR O 38/8 S 38 mm-8 mm6609-38-12 KOR O 38/12 S 38 mm-12 mm6609-38-16 KOR O 38/16 S 38 mm-16 mm6609-38-20 KOR O 38/20 S 38 mm-20 mm6609-38-25 KOR O 38/25 S 38 mm-25 mm6609-38-30 KOR O 38/30 S 38 mm-30 mm

DISCO

NTINUED

TYPE



6110WHb – G

bANjO – G M

Cutting edge ring. Non-reducing.

6118WHO – G

bANjO – G M

Soft seal, Teflon. Non-reducing.


6110-06-02 WHB 6 L 6 mm G 1/8"6110-08-04 WHB 8 L 8 mm G 1/4"6110-10-04 WHB 10 L 10 mm G 1/4"6110-12-04 WHB 12 L 12 mm G 1/4"6110-12-06 WHB 12 L 12 mm G 3/8"6110-15-08 WHB 15 L 15 mm G 1/2"6110-18-08 WHB 18 L 18 mm G 1/2"6110-22-12 WHB 22 L 22 mm G 3/4"6110-28-16 WHB 28 L 28 mm G 1"6110-35-20 WHB 35 L 35 mm G 1 1/4"6110-42-24 WHB 42 L 42 mm G 1 1/2"

6610-06-04 WHB 6 S 6 mm G 1/4"6610-08-04 WHB 8 S 8 mm G 1/4"6610-10-06 WHB 10 S 10 mm G 3/8"6610-12-06 WHB 12 S 12 mm G 3/8"6610-14-08 WHB 14 S 14 mm G 1/2"6610-16-08 WHB 16 S 16 mm G 1/2"6610-20-12 WHB 20 S 20 mm G 3/4"6610-25-16 WHB 25 S 25 mm G 1"6610-30-20 WHB 30 S 30 mm G 1 1/4"6610-38-24 WHB 38 S 38 mm G 1 1/2"

6118-06-02 WHO 6 L 6 mm G 1/8"6118-08-04 WHO 8 L 8 mm G 1/4"6118-10-04 WHO 10 L 10 mm G 1/4"6118-12-06 WHO 12 L 12 mm G 3/8"6118-15-08 WHO 15 L 15 mm G 1/2"6118-18-08 WHO 18 L 18 mm G 1/2"6118-22-12 WHO 22 L 22 mm G 3/4"

6618-06-04 WHO 6 S 6 mm G 1/4"6618-08-04 WHO 8 S 8 mm G 1/4"6618-10-06 WHO 10 S 10 mm G 3/8"6618-12-06 WHO 12 S 12 mm G 3/8"6618-14-08 WHO 14 S 14 mm G 1/2"6618-16-08 WHO 16 S 16 mm G 1/2"6618-20-12 WHO 20 S 20 mm G 3/4"6618-25-16 WHO 25 S 25 mm G 1"6618-30-20 WHO 30 S 30 mm G 1 1/4"

6111WHb – M

bANjO – M M



6111-06-10 WHB 6 L 6 mm M 10 x 1.06111-08-12 WHB 8 L 8 mm M 12 x 1.56111-10-14 WHB 10 L 10 mm M 14 x 1.56111-12-16 WHB 12 L 12 mm M 16 x 1.56111-15-18 WHB 15 L 15 mm M 18 x 1.56111-18-22 WHB 18 L 18 mm M 22 x 1.56111-22-26 WHB 22 L 22 mm M 26 x 1.56111-28-33 WHB 28 L 28 mm M 33 x 2.06111-35-42 WHB 35 L 35 mm M 42 x 2.06111-42-48 WHB 42 L 42 mm M 48 x 2.0

6611-06-12 WHB 6 S 6 mm M 12 x 1.56611-08-14 WHB 8 S 8 mm M 14 x 1.56611-10-16 WHB 10 S 10 mm M 16 x 1.56611-12-18 WHB 12 S 12 mm M 18 x 1.56611-16-22 WHB 16 S 16 mm M 22 x 1.56611-20-27 WHB 20 S 20 mm M 27 x 2.06611-25-33 WHB 25 S 25 mm M 33 x 2.06611-30-42 WHB 30 S 30 mm M 42 x 2.06611-38-48 WHB 38 S 38 mm M 48 x 2.0

6119WHO – M

bANjO – M M

Soft seal, Teflon. Non-reducing.


6119-06-10 WHO 6 L 6 mm M 10 x 1.06119-08-12 WHO 8 L 8 mm M 12 x 1.56119-10-14 WHO 10 L 10 mm M 14 x 1.56119-12-16 WHO 12 L 12 mm M 16 x 1.56119-15-18 WHO 15 L 15 mm M 18 x 1.56119-18-22 WHO 18 L 18 mm M 22 x 1.56119-22-26 WHO 22 L 22 mm M 26 x 1.5

6619-06-12 WHO 6 S 6 mm M 12 x 1.56619-08-14 WHO 8 S 8 mm M 14 x 1.56619-10-16 WHO 10 S 10 mm M 16 x 1.56619-12-18 WHO 12 S 12 mm M 18 x 1.56619-14-20 WHO 14 S 14 mm M 20 x 1.56619-16-22 WHO 16 S 16 mm M 22 x 1.56619-20-27 WHO 20 S 20 mm M 27 x 2.0




6

6112DSVW – G

bANjO – G M

Collar screw. Cutting edge ring. Non-reducing.


6112-06-02 DSVW 6 L 6 mm G 1/8"6112-08-04 DSVW 8 L 8 mm G 1/4"6112-10-04 DSVW 10 L 10 mm G 1/4"6112-12-06 DSVW 12 L 12 mm G 3/8"6112-15-08 DSVW 15 L 15 mm G 1/2"6112-18-08 DSVW 18 L 18 mm G 1/2"6112-22-12 DSVW 22 L 22 mm G 3/4"6112-28-16 DSVW 28 L 28 mm G 1"6112-35-20 DSVW 35 L 35 mm G 1 1/4"6112-42-24 DSVW 42 L 42 mm G 1 1/2"

6612-06-04 DSVW 6 S 6 mm G 1/4"6612-08-04 DSVW 8 S 8 mm G 1/4"6612-10-06 DSVW 10 S 10 mm G 3/8"6612-12-06 DSVW 12 S 12 mm G 3/8"6612-14-08 DSVW 14 S 14 mm G 1/2"6612-16-08 DSVW 16 S 16 mm G 1/2"6612-20-12 DSVW 20 S 20 mm G 3/4"6612-25-16 DSVW 25 S 25 mm G 1"6612-30-20 DSVW 30 S 30 mm G 1 1/4"6612-38-24 DSVW 38 S 38 mm G 1 1/2"

6114DSVT – G

bANjO T – G M

Collar screw. Cutting edge ring. Non-reducing.

6116WHbT – G

bANjO T – G M


6128SWVE – G

bANjO T – G M





6114-06-02 DSVT 6 L 6 mm G 1/8"6114-08-04 DSVT 8 L 8 mm G 1/4"6114-10-04 DSVT 10 L 10 mm G 1/4"6114-12-06 DSVT 12 L 12 mm G 3/8"6114-15-08 DSVT 15 L 15 mm G 1/2"6114-18-08 DSVT 18 L 18 mm G 1/2"6114-22-12 DSVT 22 L 22 mm G 3/4"6114-28-16 DSVT 28 L 28 mm G 1"6114-35-20 DSVT 35 L 35 mm G 1 1/4"6114-42-24 DSVT 42 L 42 mm G 1 1/2"

6614-06-04 DSVT 6 S 6 mm G 1/4"6614-08-04 DSVT 8 S 8 mm G 1/4"6614-10-06 DSVT 10 S 10 mm G 3/8"6614-12-06 DSVT12 S 12 mm G 3/8"6614-14-08 DSVT 14 S 14 mm G 1/2"6614-16-08 DSVT 16 S 16 mm G 1/2"6614-20-12 DSVT 20 S 20 mm G 3/4"6614-25-16 DSVT 25 S 25 mm G 1"6614-30-20 DSVT 30 S 30 mm G 1 1/4"6614-38-24 DSVT 38 S 38 mm G 1 1/2"

6116-06-02 WHBT 6 L 6 mm G 1/8"6116-08-04 WHBT 8 L 8 mm G 1/4"6116-10-04 WHBT 10 L 10 mm G 1/4"6116-12-06 WHBT 12 L 12 mm G 3/8"6116-15-08 WHBT 15 L 15 mm G 1/2"6116-18-08 WHBT 18 L 18 mm G 1/2"6116-22-12 WHBT 22 L 22 mm G 3/4"6116-28-16 WHBT 28 L 28 mm G 1"6116-35-20 WHBT 35 L 35 mm G 1 1/4"6116-42-24 WHBT 42 L 42 mm G 1 1/2"

6616-06-04 WHBT 6 S 6 mm G 1/4"6616-08-04 WHBT 8 S 8 mm G 1/4"6616-10-06 WHBT 10 S 10 mm G 3/8"6616-12-06 WHBT 12 S 12 mm G 3/8"6616-14-08 WHBT 14 S 14 mm G 1/2"6616-16-08 WHBT 16 S 16 mm G 1/2"6616-20-12 WHBT 20 S 20 mm G 3/4"6616-25-16 WHBT 25 S 25 mm G 1"6616-30-20 WHBT 30 S 30 mm G 1 1/4"6616-38-24 WHBT 38 S 38 mm G 1 1/2"

6128-06-02 SWVE 6 L 6 mm G 1/8"6128-08-04 SWVE 8 L 8 mm G 1/4"6128-10-04 SWVE 10 L 10 mm G 1/4"6128-12-06 SWVE 12 L 12 mm G 3/8"6128-15-08 SWVE 15 L 15 mm G 1/2"6128-22-12 SWVE 22 L 22 mm G 3/4"

6628-06-04 SWVE 6 S 6 mm G 1/4"6628-08-04 SWVE 8 S 8 mm G 1/4"6628-10-06 SWVE 10 S 10 mm G 3/8"6628-12-06 SWVE 12 S 12 mm G 3/8"6628-16-08 SWVE 16 S 16 mm G 1/2"6628-20-12 SWVE 20 S 20 mm G 3/4"



6110-00/03SEAL RiNG

For 6110 and 6116/6111

6120RHD

NON-RETURN VALVE

Opening pressure 1 Bar

6121 RHV – G – ED

NON-RETURN VALVE

Opening pressure 1 Bar. ED sealing

6123 RHz – G – ED

NON-RETURN VALVE




6110-00-02 Seal ring 1/8"6110-00-04 Seal ring 1/4"6110-00-06 Seal ring 3/8"6110-00-08 Seal ring 1/2"6110-00-12 Seal ring 3/4"6110-00-16 Seal ring "

6110-03-10 Seal ring M 106110-03-12 Seal ring M 126110-03-14 Seal ring M 146110-03-16 Seal ring M 166110-03-18 Seal ring M 186110-03-20 Seal ring M 206110-03-22 Seal ring M 226110-03-26 Seal ring M 266110-03-42 Seal ring M 42 - G 1 1/4"6110-03-48 Seal ring M 48 - G 1 1/2"

6120-06-06 RHD 6 L 6 mm6120-08-08 RHD 8 L 8 mm6120-10-10 RHD 10 L 10 mm6120-12-12 RHD 12 L 12 mm6120-15-15 RHD 15 L 15 mm6120-18-18 RHD 18 L 18 mm6120-22-22 RHD 22 L 22 mm6120-28-28 RHD 28 L 28 mm6120-35-35 RHD 35 L 35 mm6120-42-42 RHD 42 L 42 mm

6620-06-06 RHD 6 S 6 mm6620-08-08 RHD 8 S 8 mm6620-10-10 RHD 10 S 10 mm6620-12-12 RHD 12 S 12 mm6620-14-14 RHD 14 S 14 mm6620-16-16 RHD 16 S 16 mm6620-20-20 RHD 20 S 20 mm6620-25-25 RHD 25 S 25 mm6620-30-30 RHD 30 S 30 mm6620-38-38 RHD 38 S 38 mm

Alternative opening pressures 0.2; 0.5; 2 and 3 Bar are available on request.

For more non-return valves, see chapter 5:20.



6121-06-02 RHV 6 L 6 mm G 1/8"6121-08-04 RHV 8 L 8 mm G 1/4"6121-10-04 RHV 10 L 10 mm G 1/4"6121-12-06 RHV 12 L 12 mm G 3/8"6121-15-08 RHV 15 L 15 mm G 1/2"6121-18-08 RHV 18 L 18 mm G 1/2"6121-22-12 RHV 22 L 22 mm G 3/4"6121-28-16 RHV 28 L 28 mm G 1"6121-35-20 RHV 35 L 35 mm G 1 1/4"6121-42-24 RHV 42 L 42 mm G 1 1/2"

6621-06-04 RHV 6 S 6 mm G 1/4"6621-08-04 RHV 8 S 8 mm G 1/4"6621-10-06 RHV 10 S 10 mm G 3/8"6621-12-06 RHV 12 S 12 mm G 3/8"6621-14-08 RHV 14 S 14 mm G 1/2"6621-16-08 RHV 16 S 16 mm G 1/2"6621-20-12 RHV 20 S 20 mm G 3/4"6621-25-16 RHV 25 S 25 mm G 1"6621-30-20 RHV 30 S 30 mm G 1 1/4"6621-38-24 RHV 38 S 38 mm G 1 1/2"

6123-06-02 RHZ 6 L 6 mm G 1/8"6123-08-04 RHZ 8 L 8 mm G 1/4"6123-10-04 RHZ 10 L 10 mm G 1/4"6123-12-06 RHZ 12 L 12 mm G 3/8"6123-15-08 RHZ 15 L 15 mm G 1/2"6123-18-08 RHZ 18 L 18 mm G 1/2"6123-22-12 RHZ 22 L 22 mm G 3/4"6123-28-16 RHZ 28 L 28 mm G 1"6123-35-20 RHZ 35 L 35 mm G 1 1/4"6123-42-24 RHZ 42 L 42 mm G 1 1/2"

6623-06-04 RHZ 6 S 6 mm G 1/4"6623-08-04 RHZ 8 S 8 mm G 1/4"6623-10-06 RHZ 10 S 10 mm G 3/8"6623-12-06 RHZ 12 S 12 mm G 3/8"6623-14-08 RHZ 14 S 14 mm G 1/2"6623-16-08 RHZ 16 S 16 mm G 1/2"6623-20-12 RHZ 20 S 20 mm G 3/4"6623-25-16 RHZ 25 S 25 mm G 1"6623-30-20 RHZ 30 S 30 mm G 1 1/4"6623-38-24 RHZ 38 S 38 mm G 1 1/2"



6

6130PL

PLUG

With O-ring

6131ADAPTOR KiT

For cutting ring fittings for collar 37° cone

6126 RHR

NON-RETURN VALVE


6127 RHDi

NON-RETURN VALVE




6130-00-06 PL 6 L/S 6 mm6130-00-08 PL 8 L/S 8 mm6130-00-10 PL 10 L/S 10 mm6130-00-12 PL 12 L/S 12 mm6130-00-15 PL 15 L 15 mm6130-00-18 PL 18 L 18 mm6130-00-22 PL 22 L 22 mm6130-00-28 PL 28 L 28 mm6130-00-35 PL 35 L 35 mm6130-00-42 PL 42 L 42 mm

6630-00-14 PL 14 S 14 mm6630-00-16 PL 16 S 16 mm6630-00-20 PL 20 S 20 mm6630-00-25 PL 25 S 25 mm6630-00-30 PL 30 S 30 mm6630-00-38 PL 38 S 38 mm

6131-00-06 HOA 6 L 6 mm6131-00-08 HOA 8 L 8 mm6131-00-10 HOA 10 L 10 mm6131-00-12 HOA 12 L 12 mm6131-00-15 HOA 15 L 15 mm6131-00-18 HOA 18 L 18 mm6131-00-22 HOA 22 L 22 mm6131-00-28 HOA 28 L 28 mm6131-00-35 HOA 35 L 35 mm6131-00-42 HOA 42 L 42 mm

6631-00-06 HOA 6 S 6 mm6631-00-08 HOA 8 S 8 mm6631-00-10 HOA 10 S 10 mm6631-00-12 HOA 12 S 12 mm6631-00-14 HOA 14 S 14 mm6631-00-16 HOA 16 S 16 mm6631-00-20 HOA 20 S 20 mm6631-00-25 HOA 25 S 25 mm6631-00-30 HOA 30 S 30 mm6631-00-38 HOA 38 S 38 mm



6126-04-04 RHR G 1/4" M6126-06-06 RHR G 3/8" M6126-08-08 RHR G 1/2" M6126-12-12 RHR G 3/4" M6126-16-16 RHR G 1" M

6127-02-02 RHDI G1/8" F6127-04-04 RHDI G1/4" F6127-06-06 RHDI G3/8" F6127-08-08 RHDI G1/2" F6127-12-12 RHDI G3/4" F6127-16-16 RHDI G1" F6127-20-20 RHDI G1 1/4" F6127-24-24 RHDI G1 1/2" F

Alternative opening pressures 0.2; 0.5; 2 and 3 Bar are available on request.

For more non-return valves, see chapter 5:20.



6149-01D CUTTiNG RiNG

2-edge, progressive ring

6151fM PRE-iNSTALLATiON DiES

6152-03D – ED b4

CUTTiNG RiNG AND SOfT SEAL

For nut 6150



6149-01-06 D 6 L/S 6 mm6149-01-08 D 8 L/S 8 mm6149-01-10 D 10 L/S 10 mm6149-01-12 D 12 L/S 12 mm6149-01-15 D 15 L 15 mm6149-01-18 D 18 L 18 mm6149-01-22 D 22 L 22 mm6149-01-28 D 28 L 28 mm6149-01-35 D 35 L 35 mm6149-01-42 D 42 L 42 mm

6649-01-14 D 14 S 14 mm6649-01-16 D 16 S 16 mm6649-01-20 D 20 S 20 mm6649-01-25 D 25 S 25 mm6649-01-30 D 30 S 30 mm6649-01-38 D 38 S 38 mm

6199-00-09 FM 6 LL 6 mm6199-00-10 FM 8 LL 8 mm

6151-00-06 FM 6 L 6 mm6151-00-08 FM 8 L 8 mm6151-00-10 FM 10 L 10 mm6151-00-12 FM 12 L 12 mm6151-00-15 FM 15 L 15 mm6151-00-18 FM 18 L 18 mm6151-00-22 FM 22 L 22 mm6151-00-28 FM 28 L 28 mm6151-00-35 FM 35 L 35 mm6151-00-42 FM 42 L 42 mm

6651-00-06 FM 6 S 6 mm6651-00-08 FM 8 S 8 mm6651-00-10 FM 10 S 10 mm6651-00-12 FM 12 S 12 mm6651-00-14 FM 14 S 14 mm6651-00-16 FM 16 S 16 mm6651-00-20 FM 20 S 20 mm6651-00-25 FM 25 S 25 mm6651-00-30 FM 30 S 30 mm6651-00-38 FM 38 S 38 mm

6152-03-06 D - ED B4 6 L 6 mm6152-03-08 D - ED B4 8 L 8 mm6152-03-10 D - ED B4 10 L 10 mm6152-03-12 D - ED B4 12 L 12 mm6152-03-15 D - ED B4 15 L 15 mm6152-03-18 D - ED B4 18 L 18 mm6152-03-22 D - ED B4 22 L 22 mm6152-03-28 D - ED B4 28 L 28 mm6152-03-35 D - ED B4 35 L 35 mm6152-03-42 D - ED B4 42 L 42 mm

6652-03-06 D - ED B4 6 S 6 mm6652-03-08 D - ED B4 8 S 8 mm6652-03-10 D - ED B4 10 S 10 mm6652-03-12 D - ED B4 12 S 12 mm6652-03-14 D - ED B4 14 S 14 mm6652-03-16 D - ED B4 16 S 16 mm6652-03-20 D - ED B4 20 S 20 mm6652-03-25 D - ED B4 25 S 25 mm6652-03-30 D - ED B4 30 S 30 mm6652-03-38 D - ED B4 38 S 38 mm

6150 M NUT


6150-00-06 M 6 L 6 mm M 12 x 1.56150-00-08 M 8 L 8 mm M 14 x 1.56150-00-10 M 10 L 10 mm M 16 x 1.56150-00-12 M 12 L 12 mm M 18 x 1.56150-00-15 M 15 L 15 mm M 22 x 1.56150-00-18 M 18 L 18 mm M 26 x 1.56150-00-22 M 22 L 22 mm M 30 x 2.06150-00-28 M 28 L 28 mm M 36 x 2.06150-00-35 M 35 L 35 mm M 45 x 2.06150-00-42 M 42 L 42 mm M 52 x 2.0

6650-00-06 M 6 S 6 mm M 14 x 1.56650-00-08 M 8 S 8 mm M 16 x 1.56650-00-10 M 10 S 10 mm M 18 x 1.56650-00-12 M 12 S 12 mm M 20 x 1.56650-00-14 M 14 S 14 mm M 22 x 1.56650-00-16 M 16 S 16 mm M 24 x 1.56650-00-20 M 20 S 20 mm M 30 x 2.06650-00-25 M 25 S 25 mm M 36 x 2.06650-00-30 M 30 S 30 mm M 42 x 2.06650-00-38 M 38 S 38 mm M 52 x 2.0



6

SOfT SEAL CUTTiNG RiNG

Cutting ring with two cutting edges and soft seal (6152-03-xx / 6652-03-xx)

Leak free sealThe soft seal cutting ring gives a leak free seal and can be used with all fittings equivalent to DIN 2353.

Suitable for assembling under high pressure and in vibrating media.

The assembly should be done in the same way as the normal cutting ring and it has six sealing points, as shown in the picture above.

The soft seal ring is available in carbon steel and in stainless steel design.

Before

After

Sealing points

1-2-3-4-5-6



6153 GM LOCKiNG NUT

For type 6045/6046

Part number Type Size Thread

6153-00-12 Locking nut 6 L M 12 x 1.56153-00-14 Locking nut 8 L/6 S M 14 x 1.56153-00-16 Locking nut 10 L/8 S M 16 x 1.56153-00-18 Locking nut 12 L/10 S M 18 x 1.56153-00-20 Locking nut 12 S M 20 x 1.56153-00-22 Locking nut 15 L/14 S M 22 x 1.56153-00-24 Locking nut 16 S M 24 x 1.56153-00-26 Locking nut 18 S M 26 x 1.56153-00-30 Locking nut 22 L/20 S M 30 x 2.06153-00-36 Locking nut 28 L/25 S M 36 x 2.06153-00-42 Locking nut 30 S M 42 x 2.06153-00-45 Locking nut 35 S M 45 x 2.06153-00-52 Locking nut 42 L/38 S M 52 x 2.0

6160 SN

WELDiNG NiPPLE WiTH O-RiNG

Part number Type Pipe size Thickness

6160-06-15 SN 6 6 mm 1.75 mm6160-08-15 SN 8 8 mm 1.50 mm6160-10-20 SN 10 10 mm 2.00 mm6160-12-20 SN 12 12 mm 2.00 mm6160-16-20 SN 16 16 mm 2.00 mm6160-16-25 SN 16 16 mm 2.50 mm6160-16-30 SN 16 16 mm 3.00 mm6160-20-25 SN 20 20 mm 2.50 mm6160-20-30 SN 20 20 mm 3.00 mm6160-20-40 SN 20 20 mm 4.00 mm6160-25-30 SN 25 25 mm 3.00 mm6160-25-40 SN 25 25 mm 4.00 mm6160-30-30 SN 30 30 mm 3.00 mm6160-30-40 SN 30 30 mm 4.00 mm6160-30-50 SN 30 30 mm 5.00 mm6160-38-40 SN 38 38 mm 4.00 mm6160-38-50 SN 38 38 mm 5.00 mm

6160-50O-RiNG

For nut 6160


6160-50-06 O-ring SN 6 6 mm6160-50-08 O-ring SN 8 8 mm6160-50-10 O-ring SN 10 10 mm6160-50-12 O-ring SN 12 12 mm6160-50-16 O-ring SN 16 16 mm6160-50-20 O-ring SN 20 20 mm6160-50-25 O-ring SN 25 25 mm6160-50-30 O-ring SN 30 30 mm6160-50-38 O-ring SN 38 38 mm


7

HYDROSCAND ADAPTORS

ADAPTORS

PRODUCT GROUP 700

Hydroscand can offer a wide range of adaptors (connec-tor nipples) for different purposes such as:

– transformation between small and large thread dimen-sions;

– swivel transformation for solid threads;

– connecting hoses or pipes with threads in valves, pumps and cylinders;

– transformation between different thread systems;

– bulkhead connection for hoses;

– branching pipes or hoses with T-connections;

– sealing off pipes, hoses or thread endings.

Our adaptors are normally manufactured in carbon steel of hydraulic quality, i.e. in a crack tested material. The standard surface treatment is E-Coated, which is the name of the surface treatment we use on our fittings. This surface treatment is Cr6-free and is therefore better for both the environment and personal health.

Elbow and T-adaptors are normally soldered but some are available in forged design.

When dealing with higher pressures, avoid if possible adaptors with R- or NPTF-thread since these are harder to seal and often crack the goods when tightened too excessively.

You will find more information about steel pipe adaptors in chapter 6 – Cutting ring fittings and in chapter 7:6 – Flare fittings.


STRAiGHT ADAPTORS PAGE

ELbOw ADAPTORS PAGE

T-ADAPTORS PAGE

TAbLE Of CONTENTS

Technical specification – adaptorsMaterial: SteelBS according to 970 230Mo7PbDIN 1.0718SIS 1914-04Surface treatment:E-coated Fe/Zn 8 P1TTemperature range:-40° – +155° C

7002 Straight adaptor G M – G M 2697003 Straight adaptor G M – G M 2697005 Reduction adaptor G M – G F 2697007 Swivel adaptor G FS – G FS 2707008 Straight swivel G M – G FS 2707009 Reduction adaptor G M – G F long 2717010 Reduction adaptor G M – G F Short 2717017 Reduction adaptor G M – G F short 2717018 Reduction adaptor G M – G F long 2717011 Straight bushing G F – G F 2727012 Straight adaptor G M – R M 2727013 Straight adaptor G F – JIC M 2727015 Straight adaptor G M – SAE O M 2737019 Straight adaptor G M – M M 2737022 Straight adaptor G M – NPT M 2737023 Straight adaptor R M – R M 2737027 Straight swivel G FS – NPT M 2737070 Straight adaptor M M – M M 2747071 Special adaptor for high pressure washer 2747072 Special adaptor for high pressure washer 2747073 Special adaptor for high pressure washer 2747074 Special adaptor for high pressure washer 2747075 Special adaptor for high pressure washer 2747081 Banjo – G M 2747082 Banjo – M M 2747090 BulkheadG M – G M 2757090-00 Lock nut for Bulkhead 2757092 Choke G M – G M 275

7201 Elbow 90° adaptor G M – G FS 2757202 Elbow 90° adaptor G F – G F 2757203 Elbow 90° adaptor G M – G FS 2757204 Adjustable elbow adaptor G M – G M 2767205 Swivel elbow 90° Bend G M – G FS 2767206 Swivel elbow 90° Bend G FS – G FS 2767210 Elbow adaptor 90° G M – R M 2767301 Swivel elbow 45° G M – G FS 2767303 Swivel elbow 45° G M – G FS 2767304 Adjustable elbow G M – G M 2767305 Swivel elbow 45° G M – G FS 276

7401 T-Adaptor G M – G M – G M 2777402 T-Adaptor G FS – G FS – G FS 2777403 T-Adaptor G M – G M – G FS 2777404 L-Adaptor G M – G FS – G M 2777406 T-Adaptor G F – G F – G F 2777411 T-Adaptor G M – G M – R M 2777413 Adjustable T-Adaptor G M – G M – G M 2777414 Adjustable L-Adaptor G M – G M – G M 277


ADAPTORS NPT-THREAD PAGE

PLUGS PAGE

PLUG-iN fiTTiNGS PAGE

TAbLE Of CONTENTS

7085 Straight bushing NPT M – NPT F 2787087 Straight adaptor NPT M – NPT M 2787281 Elbow 90° NPT F – NPT F 2787282 Elbow 90° NPT M – NPT F 2787283 Elbow 90° NPT M – NPT M 2787481 T-adaptor NPT F – F – F 278

7501 Plug G M 2797501-10 Plug R M 2797502 Plug R FS 2797503 Inset plug G M 2797503-50 Inset plug UNF 2797504 Inset plug M M 2797505 Plug NPT M 2807506 Lock G F 2807510 Plug ROV L M M 2807510-01 Plug ROV S M M 2807511-00 Plug UNF M 280

3C14 748 Release ring 2803C14 749 Assembly stop 2807C14 810 Plug-in Female M G-threaded 2817C14 811 Plug Female 2817C14 812 Plug-in kit 2817C14 823 Plug male 2817C14 826 Plug-in Female M SAE-O 2817C14 830 Plug-in Female M G-threaded 2817C14 831 Plug-in Female M MM-threaded 2817C14 847 Packing kit Female 281

PRODUCT GROUP 700 HYDROSCAND ADAPTORS


7

7002STRAiGHT ADAPTOR

G M – G M

60° cone sealing. DIN 3852, A

7005REDUCTiON ADAPTOR

G M – G F

60° cone sealing


G M – G M

Flat face sealing




7002-02-02 G 1/8" M G 1/8" M7002-02-04 G 1/8" M G 1/4" M7002-02-06 G 1/8" M G 3/8" M7002-02-08 G 1/8" M G 1/2" M7002-04-04 G 1/4" M G 1/4" M7002-04-06 G 1/4" M G 3/8" M7002-04-08 G 1/4" M G 1/2" M7002-04-12 G 1/4 "M G 3/4" M7002-06-06 G 3/8" M G 3/8" M7002-06-08 G 3/8" M G 1/2" M7002-06-10 G 3/8" M G 5/8" M7002-06-12 G 3/8" M G 3/4" M7002-06-16 G 3/8" M G 1" M7002-08-08 G 1/2" M G 1/2" M7002-08-10 G 1/2" M G 5/8" M7002-08-12 G 1/2" M G 3/4" M7002-08-16 G 1/2" M G 1" M7002-10-10 G 5/8" M G 5/8" M7002-10-12 G 5/8" M G 3/4" M7002-12-12 G 3/4" M G 3/4" M7002-12-16 G 3/4" M G 1" M7002-12-20 G 3/4" M G 1 1/4" M7002-16-16 G 1" M G 1" M7002-16-20 G 1" M G 1 1/4" M7002-16-24 G 1" M G 1 1/2" M7002-16-32 G 1" M G 2" M7002-20-20 G 1 1/4" M G 1 1/4" M7002-20-24 G 1 1/4" M G 1 1/2" M7002-20-32 G 1 1/4" M G 2" M7002-24-24 G 1 1/2" M G 1 1/2" M7002-24-32 G 1 1/2" M G 2" M7002-32-32 G 2" M G 2" M

7005-02-02 G 1/8" M G 1/8" F7005-02-04 G 1/8" M G 1/4" F7005-04-02 G 1/4" M G 1/8" F7005-04-04 G 1/4" M G 1/4" F7005-04-06 G 1/4" M G 3/8" F7005-06-04 G 3/8" M G 1/4" F7005-06-06 G 3/8" M G 3/8" F7005-06-08 G 3/8" M G 1/2" F7005-08-06 G 1/2" M G 3/8" F7005-08-08 G 1/2" M G 1/2" F7005-08-10 G 1/2" M G 5/8" F7005-08-12 G 1/2" M G 3/4" F7005-10-08 G 5/8" M G 1/2" F7005-10-10 G 5/8" M G 5/8" F7005-10-12 G 5/8" M G 3/4" F7005-12-08 G 3/4" M G 1/2" F7005-12-12 G 3/4" M G 3/4" F7005-12-16 G 3/4" M G 1" F7005-16-12 G 1" M G 3/4" F7005-16-16 G 1" M G 1" F7005-16-20 G 1" M G 1 1/4" F7005-20-16 G 1 1/4" M G 1" F7005-20-20 G 1 1/4" M G 1 1/4" F7005-20-24 G 1 1/4" M G 1 1/2" F7005-20-32 G 1 1/4" M G 2" F7005-24-20 G 1 1/2" M G 1 1/4" F7005-24-24 G 1 1/2" M G 1 1/2" F7005-24-32 G 1 1/2" M G 2" F7005-32-24 G 2" M G 1 1/2" F

7003-08-08 G 1/2" M G 1/2" M

HYDROSCAND ADAPTORS PRODUCT GROUP 700


7007SwivEL ADAPTOR

G FS – G FS

7008STRAiGHT SwivEL

G M – G FS

Part number Thread 1 x Thread 2 Part number Thread 1 x Thread 2

7007-02-02 G 1/8" FS G 1/8" FS7007-02-04 G 1/8" FS G 1/4" FS7007-04-04 G 1/4" FS G 1/4" FS7007-04-06 G 1/4" FS G 3/8" FS7007-04-08 G 1/4" FS G 1/2" FS7007-06-06 G 3/8" FS G 3/8" FS7007-06-08 G 3/8" FS G 1/2" FS7007-08-08 G 1/2" FS G 1/2" FS7007-08-10 G 1/2" FS G 5/8" FS7007-08-12 G 1/2" FS G 3/4" FS7007-10-10 G 5/8" FS G 5/8" FS7007-10-12 G 5/8" FS G 3/4" FS7007-12-12 G 3/4" FS G 3/4" FS7007-12-16 G 3/4" FS G 1" FS7007-16-16 G 1" FS G 1" FS7007-20-20 G 1 1/4" FS G 1 1/4" FS7007-24-24 G 1 1/2" FS G 1 1/2" FS7007-32-32 G 2" FS G 2" FS

7008-02-02 G 1/8" M G 1/8" FS7008-02-04 G 1/8" M G 1/4" FS7008-04-02 G 1/4" M G 1/8" FS7008-04-04 G 1/4" M G 1/4" FS7008-04-06 G 1/4" M G 3/8" FS7008-04-08 G 1/4" M G 1/2" FS7008-06-04 G 3/8" M G 1/4" FS7008-06-06 G 3/8" M G 3/8" FS7008-06-08 G 3/8" M G 1/2" FS7008-06-10 G 3/8" M G 5/8" FS7008-08-04 G 1/2" M G 1/4" FS7008-08-06 G 1/2" M G 3/8" FS7008-08-08 G 1/2" M G 1/2" FS7008-08-10 G 1/2" M G 5/8" FS7008-08-12 G 1/2" M G 3/4" FS7008-10-08 G 5/8" M G 1/2" FS7008-10-10 G 5/8" M G 5/8" FS7008-10-12 G 5/8" M G 3/4" FS7008-12-06 G 3/4" M G 3/8" FS7008-12-08 G 3/4" M G 1/2" FS7008-12-10 G 3/4" M G 5/8" FS7008-12-12 G 3/4" M G 3/4" FS7008-12-16 G 3/4" M G 1" FS7008-16-08 G 1" M G 1/2" FS7008-16-12 G 1" M G 3/4" FS7008-16-16 G 1" M G 1" FS7008-16-20 G 1" M G 1 1/4" FS7008-20-16 G 1 1/4" M G 1" FS7008-20-20 G 1 1/4" M G 1 1/4" FS7008-20-24 G 1 1/4" M G 1 1/2" FS7008-24-20 G 1 1/2" M G 1 1/4" FS7008-24-24 G 1 1/2" M G 1 1/2" FS7008-24-32 G 1 1/2" M G 2" FS7008-32-32 G 2" M G 2" FS



7


G M – G F lonG


G M – G F ShorT

ED sealing


G M – G F lonG

ED sealing


G M – G F ShorT




7009-02-04 G 1/8" M G 1/4" F7009-02-06 G 1/8" M G 3/8" F7009-04-02 G 1/4" M G 1/8" F7009-04-06 G 1/4" M G 3/8" F7009-04-08 G 1/4" M G 1/2" F7009-04-12 G 1/4" M G 3/4" F7009-06-04 G 3/8" M G 1/4" F7009-06-08 G 3/8" M G 1/2" F7009-06-12 G 3/8" M G 3/4" F7009-08-06 G 1/2" M G 3/8" F7009-08-12 G 1/2" M G 3/4" F7009-08-16 G 1/2" M G 1" F7009-08-20 G 1/2" M G 1 1/4" F7009-12-08 G 3/4" M G 1/2" F7009-12-16 G 3/4" M G 1" F7009-12-20 G 3/4" M G 1 1/4" F7009-12-24 G 3/4" M G 1 1/2" F7009-16-12 G 1" M G 3/4" F7009-16-20 G 1" M G 1 1/4" F7009-16-24 G 1" M G 1 1/2" F7009-20-16 G 1 1/4" M G 1" F7009-20-24 G 1 1/4" M G 1 1/2" F7009-24-20 G 1 1/2" M G 1 1/4" F

7017-06-02 G 3/8" M ED G 1/8" F 7017-08-02 G 1/2" M ED G 1/8" F 7017-08-04 G 1/2" M ED G 1/4" F 7017-12-04 G 3/4" M ED G 1/4" F7017-12-06 G 3/4" M ED G 3/8" F 7017-16-04 G 1" M ED G 1/4" F7017-16-06 G 1" M ED G 3/8" F 7017-16-08 G 1" M ED G 1/2" F 7017-20-08 G 1 1/4" M ED G 1/2" F 7017-20-12 G 1 1/4" M ED G 3/4" F 7017-24-08 G 1 1/2" M ED G 1/2" F 7017-24-12 G 1 1/2" M ED G 3/4" F 7017-24-16 G 1 1/2" M ED G 1" F

7018-02-04 G 1/8" M ED G 1/4" F7018-02-06 G 1/8" M ED G 3/8" F7018-04-02 G 1/4" M ED G 1/8" F7018-04-06 G 1/4" M ED G 3/8" F7018-04-08 G 1/4" M ED G 1/2" F7018-04-12 G 1/4" M ED G 3/4" F7018-06-04 G 3/8" M ED G 1/4" F7018-06-08 G 3/8" M ED G 1/2" F7018-06-12 G 3/8" M ED G 3/4" F7018-08-06 G 1/2" M ED G 3/8" F7018-08-12 G 1/2" M ED G 3/4" F7018-08-16 G 1/2" M ED G 1" F7018-08-20 G 1/2" M ED G 1 1/4" F7018-12-08 G 3/4" M ED G 1/2" F7018-12-16 G 3/4" M ED G 1" F7018-12-20 G 3/4" M ED G 1 1/4" F7018-12-24 G 3/4" M ED G 1 1/2" F7018-16-12 G 1" M ED G 3/4" F7018-16-20 G 1" M ED G 1 1/4" F7018-16-24 G 1" M ED G 1 1/2" F7018-20-16 G 1 1/4" M ED G 1" F7018-20-24 G 1 1/4" M ED G 1 1/2" F7018-24-20 G 1 1/2" M ED G 1 1/4" F

7010-06-02 G 3/8" M G 1/8" F7010-08-02 G 1/2" M G 1/8" F7010-08-04 G 1/2" M G 1/4" F7010-12-04 G 3/4" M G 1/4" F7010-12-06 G 3/4" M G 3/8" F7010-12-08 G 3/4" M G 1/2" F7010-16-04 G 1" M G 1/4" F7010-16-06 G 1" M G 3/8" F7010-16-08 G 1" M G 1/2" F7010-20-08 G 1 1/4" M G 1/2" F7010-20-12 G 1 1/4" M G 3/4" F7010-24-08 G 1 1/2" M G 1/2" F7010-24-12 G 1 1/2" M G 3/4" F7010-24-16 G 1 1/2" M G 1" F7010-32-08 G 2" M G 1/2" F7010-32-20 G 2" M G 1 1/4" F



7011STRAiGHT bUSHiNG

G F – G F


G F – JIC M


G M – r M



7011-02-02 G 1/8" F G 1/8" F7011-02-04 G 1/8" F G 1/4" F7011-02-06 G 1/8" F G 3/8" F7011-04-04 G 1/4" F G 1/4" F7011-04-06 G 1/4" F G 3/8" F7011-04-08 G 1/4" F G 1/2" F7011-06-06 G 3/8" F G 3/8" F7011-06-08 G 3/8" F G 1/2" F7011-06-12 G 3/8" F G 3/4" F7011-08-08 G 1/2" F G 1/2" F7011-08-10 G 1/2" F G 5/8" F7011-08-12 G 1/2" F G 3/4" F7011-08-16 G 1/2" F G 1" F7011-10-10 G 5/8" F G 5/8" F7011-10-12 G 5/8" F G 3/4" F7011-12-12 G 3/4" F G 3/4" F7011-12-16 G 3/4" F G 1" F7011-16-16 G 1" F G 1" F7011-16-20 G 1" F G 1 1/4" F7011-20-20 G 1 1/4" F G 1 1/4" F7011-20-24 G 1 1/4" F G 1 1/2" F7011-24-24 G 1 1/2" F G 1 1/2" F7011-24-32 G 1 1/2" F G 2" F7011-32-32 G 2" F G 2" F

7013-02-07 G 1/8" M JIC 7/16" M7013-04-07 G 1/4" M JIC 7/16" M7013-04-08 G 1/4" M JIC 1/2" M7013-04-09 G 1/4" M JIC 9/16" M7013-04-12 G 1/4" M JIC 3/4" M7013-06-07 G 3/8" M JIC 7/16" M7013-06-08 G 3/8" M JIC 1/2" M7013-06-09 G 3/8" M JIC 9/16" M7013-06-12 G 3/8" M JIC 3/4" M7013-06-14 G 3/8" M JIC 7/8" M7013-08-07 G 1/2" M JIC 7/16" M7013-08-08 G 1/2" M JIC 1/2" M7013-08-09 G 1/2" M JIC 9/16" M7013-08-12 G 1/2" M JIC 3/4" M7013-08-14 G 1/2" M JIC 7/8" M7013-08-17 G 1/2" M JIC 1 1/16" M7013-08-19 G 1/2" M JIC 1 3/16" M7013-10-12 G 5/8" M JIC 3/4" M7013-10-14 G 5/8" M JIC 7/8" M7013-10-17 G 5/8" M JIC 1 1/16" M7013-10-21 G 5/8" M JIC 1 5/16" M7013-12-12 G 3/4" M JIC 3/4" M7013-12-14 G 3/4" M JIC 7/8" M7013-12-17 G 3/4" M JIC 1 1/16" M7013-12-19 G 3/4" M JIC 1 3/16" M7013-12-21 G 3/4" M JIC 1 5/16" M7013-16-14 G 1" M JIC 7/8" M7013-16-17 G 1" M JIC 1 1/16" M7013-16-19 G 1" M JIC 1 3/16" M7013-16-21 G 1" M JIC 1 5/16" M7013-16-26 G 1" M JIC 1 5/8" M7013-20-26 G 1 1/4" M JIC 1 5/8" M7013-24-26 G 1 1/2" M JIC 1 5/8" M7013-24-30 G 1 1/2" M JIC 1 7/8" M7013-32-40 G 2" M JIC 2 1/2" M

7012-02-02 G 1/8" M R 1/8" M7012-02-04 G 1/8" M R 1/4" M7012-04-02 G 1/4" M R 1/8" M7012-04-04 G 1/4" M R 1/4" M7012-04-06 G 1/4" M R 3/8" M7012-04-08 G 1/4" M R 1/2" M7012-06-04 G 3/8" M R 1/4" M7012-06-06 G 3/8" M R 3/8" M7012-06-08 G 3/8" M R 1/2" M7012-06-12 G 3/8" M R 3/4" M7012-08-06 G 1/2" M R 3/8" M7012-08-08 G 1/2" M R 1/2" M7012-08-10 G 1/2" M R 5/8" M7012-08-12 G 1/2" M R 3/4" M7012-10-10 G 5/8" M R 5/8" M7012-12-04 G 3/4" M R 1/4" M7012-12-06 G 3/4" M R 3/8" M7012-12-08 G 3/4" M R 1/2" M7012-12-12 G 3/4" M R 3/4" M7012-12-16 G 3/4" M R 1" M7012-16-12 G 1" M R 3/4" M7012-16-16 G 1" M R 1" M7012-16-20 G 1" M R 1 1/4" M7012-20-12 G 1 1/4" M R 3/4" M7012-20-20 G 1 1/4" M R 1 1/4" M7012-24-24 G 1 1/2" M R 1 1/2" M7012-32-32 G 2" M R2" M



7


G M – SAE o M


G M – nPT M


r M – r M

7027STRAiGHT SwivEL

G FS – nPT M


G M – M M





7015-04-07 G 1/4" M SAE 7/16" M7015-04-08 G 1/4" M SAE 1/2" M7015-04-09 G 1/4" M SAE 9/16" M7015-04-12 G 1/4" M SAE 3/4" M7015-06-09 G 3/8" M SAE 9/16" M7015-06-12 G 3/8" M SAE 3/4" M7015-08-12 G 1/2" M SAE 3/4" M7015-08-14 G 1/2" M SAE 7/8" M7015-08-17 G 1/2" M SAE 1 1/16" M7015-08-21 G 1/2" M SAE 1 5/16" M7015-10-14 G 5/8" M SAE 7/8" M7015-10-17 G 5/8" M SAE 1 1/16" M7015-12-17 G 3/4" M SAE 1 1/16" M7015-12-19 G 3/4" M SAE 1 3/16" M7015-12-21 G 3/4" M SAE 1 5/16" M7015-16-19 G 1" M SAE 1 3/16" M7015-16-21 G 1" M SAE 1 5/16" M7015-16-26 G 1" M SAE 1 5/8" M

7022-02-02 G 1/8" M 1/8"-27 NPT M7022-04-02 G 1/4" M 1/8"-27 NPT M7022-04-04 G 1/4" M 1/4"-18 NPT M7022-04-06 G 1/4" M 3/8"-18 NPT M7022-04-08 G 1/4" M 1/2"-14 NPT M7022-06-04 G 3/8" M 1/4"-18 NPT M7022-06-06 G 3/8" M 3/8"-18 NPT M7022-06-08 G 3/8" M 1/2"-14 NPT M7022-06-12 G 3/8" M 3/4"-14 NPT M7022-08-06 G 1/2" M 3/8"-18 NPT M7022-08-08 G 1/2" M 1/2"-14 NPT M7022-08-12 G 1/2" M 3/4"-14 NPT M7022-08-16 G 1/2" M 1"-11½ NPT M7022-10-08 G 5/8" M 1/2"-14 NPT M7022-12-04 G 3/4" M 1/4"-18 NPT M7022-12-06 G 3/4" M 3/8"-18 NPT M7022-12-08 G 3/4" M 1/2"-14 NPT M7022-12-12 G 3/4" M 3/4"-14 NPT M7022-12-16 G 3/4" M 1"-11½ NPT M7022-16-08 G 1" M 1/2"-14 NPT M7022-16-12 G 1" M 3/4"-14 NPT M7022-16-16 G 1" M 1"-11½ NPT M7022-16-20 G 1" M 1 1/4"-11½ NPT M7022-16-24 G 1" M 1 1/2"-11½ NPT M7022-20-20 G 1 1/4" M 1 1/4"-11½ NPT M7022-24-16 G 1 1/2" M 1"-11½ NPT M7022-24-24 G 1 1/2" M 1 1/2"-11½ NPT M7022-32-24 G 2" M 1 1/2"-11½ NPT M7022-32-32 G 2" M 2"-11½ NPT M

7023-04-04 R 1/4" M R 1/4" M7023-06-06 R 3/8" M R 3/8" M7023-08-08 R 1/2" M R 1/2" M7023-16-16 R 1" M R 1" M

7027-02-04 G 1/8" FS 1/4"-18 NPT M7027-04-02 G 1/4" FS 1/8"-27 NPT M7027-04-04 G 1/4" FS 1/4"-18 NPT M7027-06-06 G 3/8" FS 3/8"-18 NPT M7027-08-08 G 1/2" FS 1/2"-14 NPT M

7019-02-10 G 1/8" M M 10 x 1.0 M7019-02-12 G 1/8" M M 12 x 1.5 M7019-04-10 G 1/4" M M 10 x 1.0 M7019-04-12 G 1/4" M M 12 x 1.5 M7019-04-14 G 1/4" M M 14 x 1.5 M7019-04-16 G 1/4" M M 16 x 1.5 M7019-04-18 G 1/4" M M 18 x 1.5 M7019-06-12 G 3/8" M M 12 x 1.5 M7019-06-14 G 3/8" M M 14 x 1.5 M7019-06-16 G 3/8" M M 16 x 1.5 M7019-06-18 G 3/8" M M 18 x 1.5 M7019-06-20 G 3/8" M M 20 x 1.5 M7019-06-22 G 3/8" M M 22 x 1.5 M7019-08-16 G 1/2" M M 16 x 1.5 M7019-08-18 G 1/2" M M 18 x 1.5 M7019-08-20 G 1/2" M M 20 x 1.5 M7019-08-22 G 1/2" M M 22 x 1.5 M7019-08-26 G 1/2" M M 26 x 1.5 M7019-10-26 G 5/8" M M 26 x 1.5 M7019-12-18 G 3/4" M M 18 x 1.5 M7019-12-22 G 3/4" M M 22 x 1.5 M7019-12-26 G 3/4" M M 26 x 1.5 M7019-12-30 G 3/4" M M 30 x 1.5 M7019-16-22 G 1" M M 22 x 1.5 M7019-16-33 G 1" M M 33 x 2.0 M




M M – M M

7071SPECiAL ADAPTOR

fOR HiGH PRESSURE wASHER

7072SPECiAL ADAPTOR


7073SPECiAL ADAPTOR


7074SPECiAL ADAPTOR


7075SPECiAL ADAPTOR


7082BAnJo – M M







Part number Type For bolt Thread

7070-10-10 M 10 x 1.0 M M 10 x 1.0 M7070-10-12 M 10 x 1.0 M M 12 x 1.5 M7070-12-12 M 12 x 1.5 M M 12 x 1.5 M7070-12-14 M 12 x 1.5 M M 14 x 1.5 M7070-12-16 M 12 x 1.5 M M 16 x 1.5 M7070-14-14 M 14 x 1.5 M M 14 x 1.5 M7070-14-16 M 14 x 1.5 M M 16 x 1.5 M7070-14-18 M 14 x 1.5 M M 18 x 1.5 M7070-16-16 M 16 x 1.5 M M 16 x 1.5 M7070-16-18 M 16 x 1.5 M M 18 x 1.5 M7070-16-22 M 16 x 1.5 M M 22 x 1.5 M7070-18-18 M 18 x 1.5 M M 18 x 1.5 M7070-18-20 M 18 x 1.5 M M 20 x 1.5 M7070-18-22 M 18 x 1.5 M M 22 x 1.5 M7070-18-26 M 18 x 1.5 M M 26 x 1.5 M7070-22-22 M 22 x 1.5 M M 22 x 1.5 M7070-22-30 M 22 x 1.5 M M 30 x 1.5 M7070-26-26 M 26 x 1.5 M M 26 x 1.5 M7070-30-30 M 30 x 1.5 M M 30 x 1.5 M

7071-22-04 M 22 x 1.5 FS G 1/4" M HPW7071-22-06 M 22 x 1.5 FS G 3/8" M HPW

7072-22-04 M 22 x 1.5 FS G 1/4" F HPW7072-22-06 M 22 x 1.5 FS G 3/8" F HPW

7073-22-04 M 22 x 1.5 M G 1/4" F HPW7073-22-06 M 22 x 1.5 M G 3/8" F HPW

7074-22-22 M 22 x 1.5 M M 22 x 1.5 M HPW

7075-22-04 M 22 x 1.5 M G 1/4" M HPW7075-22-06 M 22 x 1.5 M G 3/8" M HPW

7082-14-14 Banjo M14 M 14 x 1.5 M7082-18-18 Banjo M18 M 18 x 1.5 M

7081BAnJo – G M

Part number Type For bolt Thread

7081-04-04 Banjo G 1/4" G 1/4" M7081-06-04 Banjo G 3/8" G 1/4" M7081-06-06 Banjo G 3/8" G 3/8" M7081-08-06 Banjo G 1/2" G 3/8" M7081-08-08 Banjo G 1/2" G 1/2" M7081-12-08 Banjo G 3/4" G 1/2" M7081-12-12 Banjo G 3/4" G 3/4" M



7

7090bULkHEAD G M – G M

7201ELbOw 90°ADAPTOR

G M – G FS

7090-00LOCk NUT fOR bULkHEAD

Part number Thread 1 Type Thread 2 Part number Thread 1 Type Thread 2

Part number Type To Thread

7090-04-04 G 1/4" M Bulkhead G 1/4" M7090-04-06 G 1/4" M Bulkhead G 3/8" M7090-06-06 G 3/8" M Bulkhead G 3/8" M7090-08-06 G 1/2" M Bulkhead G 3/8" M7090-08-08 G 1/2" M Bulkhead G 1/2" M7090-10-10 G 5/8" M Bulkhead G 5/8" M7090-12-12 G 3/4" M Bulkhead G 3/4" M7090-16-16 G 1" M Bulkhead G 1" M7090-20-20 G 1 1/4" M Bulkhead G 1 1/4" M7090-24-24 G 1 1/2" M Bulkhead G 1 1/2" M7090-32-32 G 2" M Bulkhead G 2" M

7201-02-02 G 1/8" M 90° G 1/8" FS7201-04-04 G 1/4" M 90° G 1/4" FS7201-06-06 G 3/8" M 90° G 3/8" FS7201-08-08 G 1/2" M 90° G 1/2" FS7201-10-10 G 5/8" M 90° G 5/8" FS7201-12-12 G 3/4" M 90° G 3/4" FS7201-16-16 G 1" M 90° G 1" FS7201-20-20 G 1 1/4" M 90° G 1 1/4" FS7201-24-24 G 1 1/2" M 90° G 1 1/2" FS7201-32-32 G 2" M 90° G 2" FS

7202ELbOw 90° ADAPTOR

G F – G F

Part number Thread 1 Type Thread 2

7202-02-02 G 1/8" F 90° G 1/8" F7202-04-04 G 1/4" F 90° G 1/4" F7202-06-06 G 3/8" F 90° G 3/8" F7202-08-08 G 1/2" F 90° G 1/2" F7202-12-12 G 3/4" F 90° G 3/4" F7202-16-16 G 1" F 90° G 1" F

7203ELbOw 90° ADAPT0R

G M – G FS

Forged


7203-02-02 G 1/8" M 90° Forged G 1/8" FS7203-04-04 G 1/4" M 90° Forged G 1/4" FS 7203-06-06 G 3/8" M 90° Forged G 3/8" FS7203-08-08 G 1/2" M 90° Forged G 1/2" FS7203-12-12 G 3/4" M 90° Forged G 3/4" FS7203-16-16 G 1" M 90° Forged G 1" FS7203-20-20 G 1 1/4" M 90° Forged G 1 1/4" FS

7090-00-04 Lock nut 7090-04-04 G 1/4" M7090-00-06 Lock nut 7090-06-06 G 3/8" M7090-00-08 Lock nut 7090-08-08 G 1/2" M7090-00-10 Lock nut 7090-10-10 G 5/8" M7090-00-12 Lock nut 7090-12-12 G 3/4" M7090-00-16 Lock nut 7090-16-16 G 1" M7090-00-20 Lock nut 7090-20-20 G 1 1/4" M

7092ChokE G M – G M

Own drilling


7092-02-02 G 1/8" M G 1/8" M choke7092-04-04 G 1/4" M G 1/4" M choke7090-04-06 G 1/4" M G 1/4" M choke7092-06-06 G 3/8" M G 3/8" M choke7092-06-08 G 3/8" M G 1/2" M choke7092-08-08 G 1/2" M G 1/2" M choke7092-08-12 G 1/2" M G 3/4" M choke7092-12-12 G 3/4" M G 3/4" M choke



7204AdJuSTABlE ElBow AdAPTor

G M – G M

7205SwivEL ELbOw 90° bEND

G M – G FS

7206SwivEL ELbOw 90° bEND

G FS – G FS

7210ELbOw ADAPTOR 90°

G M – r M

7301SwivEL ELbOw 45°

G M – G FS






7204-04-04 G 1/4" M 90° G 1/4" M Adj7204-06-06 G 3/8" M 90° G 3/8" M Adj7204-08-08 G 1/2" M 90° G 1/2" M Adj7204-12-12 G 3/4" M 90° G 3/4" M Adj7204-16-16 G 1" M 90° G 1" M Adj7204-20-20 G 1 1/4" M 90° G 1 1/4" M Adj

7205-02-02 G 1/8" M 90° G 1/8" FS7205-04-04 G 1/4" M 90° G 1/4" FS7205-06-06 G 3/8" M 90° G 3/8" FS7205-08-08 G 1/2" M 90° G 1/2" FS7205-12-12 G 3/4" M 90° G 3/4" FS7205-16-16 G 1" M 90° G 1" FS7205-20-20 G 1 1/4" M 90° G 1 1/4" FS7205-24-24 G 1 1/2" M 90° G 1 1/2" FS

7206-04-04 G 1/4" FS 90° G 1/4" FS7206-06-06 G 3/8" FS 90° G 3/8" FS7206-08-08 G 1/2" FS 90° G 1/2" FS7206-16-16 G 1" FS 90° G 1" FS7206-24-24 G 1 1/2" FS 90° G 1 1/2" FS

7210-02-02 G 1/8" M 90° R 1/8" M7210-04-04 G 1/4" M 90° R 1/4" M7210-06-06 G 3/8" M 90° R 3/8" M7210-06-08 G 3/8" M 90° R 1/2" M7210-08-08 G 1/2" M 90° R 1/2" M7210-12-12 G 3/4" M 90° R 3/4" M7210-16-16 G 1" M 90° R 1" M

7301-04-04 G 1/4" M 45° G 1/4" FS7301-06-06 G 3/8" M 45° G 3/8" FS7301-08-08 G 1/2" M 45° G 1/2" FS7301-12-12 G 3/4" M 45° G 3/4" FS7301-16-16 G 1" M 45° G 1" FS7301-20-20 G 1 1/4" M 45° G 1 1/4" FS


G M – G FS

Forged


7303-04-04 G 1/4" M 45° Forged G 1/4" FS7303-06-06 G 3/8" M 45° Forged G 3/8" FS7303-08-08 G 1/2" M 45° Forged G 1/2" FS7303-12-12 G 3/4" M 45° Forged G 3/4" FS7303-16-16 G 1" M 45° Forged G 1" FS

7304AdJuSTABlE ElBow

G M – G M


7304-04-04 G 1/4" M 45° G 1/4" M Adj7304-06-06 G 3/8" M 45° G 3/8" M Adj7304-08-08 G 1/2" M 45° G 1/2" M Adj7304-12-12 G 3/4" M 45° G 3/4" M Adj7304-16-16 G 1" M 45° G 1" M Adj


G M – G FS


7305-04-04 G 1/4" M 45° G 1/4" FS7305-06-06 G 3/8" M 45° G 3/8" FS7305-08-08 G 1/2" M 45° G 1/2" FS7305-10-10 G 5/8" M 45° G 5/8" FS7305-12-12 G 3/4" M 45° G 3/4" FS7305-16-16 G 1" M 45° G 1" FS



7

7401T-ADAPTOR

G M – G M – G M

7406T-ADAPTOR

G F – G F – G F

7402T-ADAPTOR

G FS – G FS – G FS

7403T-ADAPTOR

G M – G M – G FS

7404L-ADAPTOR

G M – G FS – G M

Part number Thread 1 x Thread 2 x Thread 3 Part number Thread 1 x Thread 2 x Thread 3

Part number Thread 1 x Thread 2 x Thread 3



7401-04-04 G 1/4" M G 1/4" M G 1/4" M7401-06-06 G 3/8" M G 3/8" M G 3/8" M7401-08-08 G 1/2" M G 1/2" M G 1/2" M7401-12-12 G 3/4" M G 3/4" M G 3/4" M7401-16-16 G 1" M G 1" M G 1" M7401-20-20 G 1 1/4" M G 1 1/4" M G 1 1/4" M7401-24-24 G 1 1/2" M G 1 1/2" M G 1 1/2" M

7406-02-02 G 1/8" F G 1/8" F G 1/8" F7406-04-04 G 1/4" F G 1/4" F G 1/4" F7406-06-06 G 3/8" F G 3/8" F G 3/8" F7406-08-08 G 1/2" F G 1/2" F G 1/2" F7406-12-12 G 3/4" F G 3/4" F G 3/4" F7406-16-16 G 1" F G 1" F G 1" F7406-20-20 G 1 1/4" F G 1 1/4" F G 1 1/4" F

7411T-ADAPTOR

G M – G M – r M


7411-04-04 G 1/4" M G 1/4" M R 1/4" M7411-06-06 G 3/8" M G 3/8" M R 3/8" M7411-08-08 G 1/2" M G 1/2" M R 1/2" M7411-12-12 G 3/4" M G 3/4" M R 3/4" M7411-16-16 G 1" M G 1" M R 1" M

7413 AdJuSTABlE T-AdAPTor

G M – G M – G M

7414AdJuSTABlE l-AdAPTor

G M – G M – G M



7413-04-04 G 1/4" M G 1/4" M G 1/4" M7413-06-06 G 3/8" M G 3/8" M G 3/8" M7413-08-08 G 1/2" M G 1/2" M G 1/2" M7413-12-12 G 3/4" M G 3/4" M G 3/4" M7413-16-16 G 1" M G 1" M G 1" M

7414-04-04 G 1/4" M G 1/4" M G 1/4" M7414-06-06 G 3/8" M G 3/8" M G 3/8" M7414-08-08 G 1/2" M G 1/2" M G 1/2" M7414-12-12 G 3/4" M G 3/4" M G 3/4" M7414-16-16 G 1" M G 1" M G1" M

7402-04-04 G 1/4" FS G 1/4" FS G 1/4" FS7402-06-06 G 3/8" FS G 3/8" FS G 3/8" FS7402-08-08 G 1/2" FS G 1/2" FS G 1/2" FS7402-12-12 G 3/4" FS G 3/4" FS G 3/4" FS7402-16-16 G 1" FS G 1" FS G 1" FS7402-20-20 G 1 1/4" FS G 1 1/4" FS G 1 1/4" FS

7403-04-04 G 1/4" M G 1/4" M G 1/4" FS7403-06-06 G 3/8" M G 3/8" M G 3/8" FS7403-08-08 G 1/2" M G 1/2" M G 1/2" FS7403-12-12 G 3/4" M G 3/4" M G 3/4" FS7403-16-16 G 1" M G 1" M G 1" FS7403-20-20 G 1 1/4" M G 1 1/4" M G 1 1/4" FS7403-24-24 G 1 1/2" M G 1 1/2" M G 1 1/2" FS

7404-04-04 G 1/4" M G 1/4" FS G 1/4" M7404-06-06 G 3/8" M G 3/8" FS G 3/8" M7404-08-08 G 1/2" M G 1/2" FS G 1/2" M7404-12-12 G 3/4" M G 3/4" FS G 3/4" M7404-16-16 G 1" M G 1" FS G 1" M7404-20-20 G 1 1/4" M G 1 1/4" FS G 1 1/4" M7404-24-24 G 1 1/2" M G 1 1/2" FS G 1 1/2" M



7085STRAiGHT bUSHiNG

nPT M – nPT F


7085-02-04 NPT 1/8" F NPT 1/8" F7085-04-04 NPT 1/4" F NPT 1/4" F7085-04-06 NPT 1/4" F NPTF 3/8" F7085-08-08 NPT 1/2" F NPT 1/2" F7085-12-12 NPTF 3/4" F NPTF 3/4" F7085-12-16 NPT 3/4" F NPT 1" F7085-20-20 NPTF 1 1/4" F NPTF 1 1/4" F


nPT M – nPT M


7087-02-02 NPT 1/8" M NPT 1/8" M7087-02-04 NPT 1/8" M NPT 1/4" M7087-04-04 NPT 1/8" M NPT 1/4" M7087-04-06 NPT 1/4" M NPT 3/8" M7087-04-08 NPT 1/4" M NPT 1/2" M7087-06-06 NPT 3/8" M NPT 3/8" M7087-06-08 NPT 3/8" M NPT 1/2" M7087-08-08 NPT 1/2" M NPT 1/2" M7087-08-12 NPT 3/4" M NPT 1/2" M7087-12-12 NPT 3/4" M NPT 3/4" M7087-12-16 NPT 1" M NPT 3/4" M7087-16-16 NPT 1" M NPT 1" M7087-20-20 NPT 1 1/4" M NPT 1 1/4" M7087-24-24 NPT 1 1/2" M NPT 1 1/2" M7087-32-32 NPT 2" M NPT 2" M

7281ELbOw 90°

nPT F – nPT F

7282ELbOw 90°

nPT M – nPT F

7283ELbOw 90°

nPT M – nPT M

7481 T-ADAPTOR

nPT F – F – F




7281-02-02 NPT 1/8" F 90° NPT 1/8" F7281-04-04 NPT 1/4" F 90° NPT 1/4" F7281-16-16 NPT 1" F 90° NPT 1" F

7282-02-02 NPT 1/8" M 90° NPT 1/8" F7282-02-04 NPT 1/8" M 90° NPT 1/4" F7282-04-04 NPT 1/4" M 90° NPT 1/4" F7282-06-04 NPT 3/8" M 90° NPT 1/4" F7282-06-06 NPT 3/8" M 90° NPT 3/8" F7282-06-08 NPT 3/8" M 90° NPT 1/2" F7282-08-06 NPT 1/2" M 90° NPT 3/8" F7282-08-08 NPT 1/2" M 90° NPT 1/2" F7282-12-08 NPT 3/4" M 90° NPT 1/2" F7282-12-12 NPT 3/4" M 90° NPT 3/4" F

7283-04-04 NPT 1/4" M 90° NPT 1/4" M7283-06-08 NPT 3/8" M 90° NPT 1/2" M7283-08-08 NPT 1/2" M 90° NPT 1/2" M7283-08-12 NPT 1/2" M 90° NPT 3/4" M7283-12-16 NPT 1" M 90° NPT 1" M7283-16-16 NPT 1" M 90° NPT 1" M


7481-02-02 NPT 1/8" F NPT 1/8" F NPT 1/8" F7481-06-06 NPT 3/8" F NPT 3/8" F NPT 3/8" F7481-08-08 NPT 1/2" F NPT 1/2" F NPT 1/2" F7481-12-12 NPT 3/4" F NPT 3/4" F NPT 3/4" F



7

7501PLUG G M

7503iNSET PLUG G M

7501-10PLUG R M

7502PLUG R fS

Part number Type Thread Part number Type Thread



7501-00-02 Plug G 1/8" M7501-00-04 Plug G 1/4" M7501-00-06 Plug G 3/8" M7501-00-08 Plug G 1/2" M7501-00-10 Plug G 5/8" M7501-00-12 Plug G 3/4" M7501-00-16 Plug G 1" M7501-00-20 Plug G 1 1/4" M7501-00-24 Plug G 1 1/2" M7501-00-32 Plug G 2" M

7503-00-02 Inset plug G 1/8" M7503-00-04 Inset plug G 1/4" M7503-00-06 Inset plug G 3/8" M7503-00-08 Inset plug G 1/2" M7503-00-12 Inset plug G 3/4" M7503-00-16 Inset plug G 1" M7503-00-20 Inset plug G 1 1/4" M7503-00-24 Inset plug G 1 1/2" M

7501-10-02 Plug R 1/8" M7501-10-04 Plug R 1/4" M7501-10-06 Plug R 3/8" M7501-10-08 Plug R 1/2" M7501-10-12 Plug R 3/4" M7501-10-16 Plug R 1" M7501-10-20 Plug R 1 1/4" M7501-10-24 Plug R 1 1/2" M7501-10-32 Plug R 2" M

7502-00-02 Plug G 1/8" FS7502-00-04 Plug G 1/4" FS7502-00-06 Plug G 3/8" FS7502-00-08 Plug G 1/2" FS7502-00-12 Plug G 3/4" FS7502-00-16 Plug G 1" FS7502-00-20 Plug G 1 1/4" FS7502-00-24 Plug G 1 1/2" FS

7503-50iNSET PLUG UNf


7503-50-06 Inset plug 3/8"-24 UNF7503-50-07 Inset plug 7/16"-20 UNF7503-50-08 Inset plug 1/2"-20 UNF7503-50-09 Inset plug 9/16"-18 UNF7503-50-12 Inset plug 3/4"-16 UNF7503-50-14 Inset plug 7/8"-14 UNF7503-50-17 Inset plug 1 1/16"-12 UNF7503-50-21 Inset plug 1 5/16"-12 UNF7503-50-26 Inset plug 1 5/8"-12 UNF

7504iNSET PLUG M M


7504-00-10 Inset plug M 10 x 1.0 M7504-00-12 Inset plug M 12 x 1.5 M7504-00-14 Inset plug M 14 x 1.5 M7504-00-16 Inset plug M 16 x 1.5 M7504-00-18 Inset plug M 18 x 1.5 M7504-00-20 Inset plug M 20 x 1.5 M7504-00-22 Inset plug M 22 x 1.5 M7504-00-26 Inset plug M 26 x 1.5 M7504-00-27 Inset plug M 27 x 2.0 M7504-00-33 Inset plug M 33 x 2.0 M7504-00-42 Inset plug M 42 x 2.0 M



7505PLUG NPT M


7505-00-02 Plug 1/8"-27 NPT M7505-00-04 Plug 1/4"-18 NPT M7505-00-06 Plug 3/8"-18 NPT M7505-00-08 Plug 1/2"-14 NPT M7505-00-12 Plug 3/4"-14 NPT M7505-00-16 Plug 1"-11½ NPT M7505-00-20 Plug 1 1/4"-11½ NPT M7505-00-24 Plug 1 1/2"-11½ NPT M

7506LOCk G f


7506-00-02 Lock G 1/8" IF7506-00-04 Lock G 1/4" IF7506-00-06 Lock G 3/8" IF7506-00-08 Lock G 1/2" IF7506-00-10 Lock G 5/8" IF7506-00-12 Lock G 3/4" IF7506-00-16 Lock G 1" IF7506-00-20 Lock G 1 1/4" IF7506-00-24 Lock G 1 1/2" IF

7510PLUG ROv L M M

DIN 3861

7510-01PLUG ROv S M M

DIN 3861

7511-00PLUG UNf M




7510-00-06 ROV 6 L M 12 x 1.5 M7510-00-08 ROV 8 L M 14 x 1.5 M7510-00-10 ROV 10 L M 16 x 1.5 M7510-00-12 ROV 12 L M 18 x 1.5 M7510-00-15 ROV 15 L M 22 x 1.5 M7510-00-18 ROV 18 L M 26 x 1.5 M7510-00-22 ROV 22 L M 30 x 2.0 M7510-00-28 ROV 28 L M 36 x 2.0 M7510-00-35 ROV 35 L M 45 x 2.0 M7510-00-42 ROV 42 L M 52 x 2.0 M

7510-01-06 ROV 6 S M 14 x 1.5 M7510-01-08 ROV 8 S M 16 x 1.5 M7510-01-10 ROV 10 S M 18 x 1.5 M7510-01-12 ROV 12 S M 20 x 1.5 M7510-01-14 ROV 14 S M 22 x 1.5 M7510-01-16 ROV 16 S M 24 x 1.5 M7510-01-20 ROV 20 S M 30 x 2.0 M7510-01-25 ROV 25 S M 36 x 2.0 M7510-01-30 ROV 30 S M 42 x 2.0 M7510-01-38 ROV 38 S M 52 x 2.0 M

7511-00-07 Plug 7/16" - 20 UNF7511-00-09 Plug 9/16" - 18 UNF7511-00-12 Plug 3/4" - 16 UNF7511-00-17 Plug 1 1/16" - 12 UN7511-00-21 Plug 1 5/16" - 12 UN7511-00-26 Plug 1 5/16" - 12 UN7511-00-30 Plug 1 7/8" - 12 UN

3C14 748RELEASE RiNG

Product group 300


3C147480400 1/4” Release ring 103C147480600 3/8” Release ring 103C147480800 1/2” Release ring 103C147481200 3/4” Release ring 103C147481600 1” Release ring 10

3C14 749ASSEMbLY STOP

Product group 300


3C147490400 1/4” Assembly stop 103C147490600 3/8” Assembly stop 103C147490800 1/2” Assembly stop 103C147491200 3/4” Assembly stop 103C147491600 1” Assembly stop 10



7

7C14 810PLUG-iN

fEMALE M G-THREADED

7C14 847PACkiNG kiT fEMALE

O-ring and support ring



7C14 810 0404 Plug-in female 1/4" G 1/4"7C14 810 0606 Plug-in female 3/8" G 3/8"7C14 810 0808 Plug-in female 1/2" G 1/2"7C14 810 1212 Plug-in female 3/4" G 3/4"7C14 810 1616 Plug-in female 1" G 1"

7C14 826PLUG-iN

fEMALE M SAE-O

7C14 830PLUG-iN

fEMALE M G-THREADED

Built-in rubber sealing

7C14 831PLUG-iN

fEMALE M MM-THREADED

ISO 6149-3




7C14 826 0407 Plug-in female 1/4" 7/16-207C14 826 0609 Plug-in female 3/8" 9/16-187C14 826 0812 Plug-in female 1/2" 3/4-167C14 826 0814 Plug-in female 1/2" 7/8-147C14 826 0817 Plug-in female 1/2" 1 1/16-127C14 826 1217 Plug-in female 3/4" 1 1/16-127C14 826 1621 Plug-in female 1" 1 5/16-12

7C14 830 0404 Plug-in female 1/4" G 1/4"7C14 830 0606 Plug-in female 3/8" G 3/8"7C14 830 0808 Plug-in female 1/2" G 1/2"

7C14 831 0612 Plug-in female 3/8" M 12 x 1.57C14 831 0616 Plug-in female 3/8" M 16 x 1.57C14 831 0818 Plug-in female 1/2" M 18 x 1.57C14 831 1222 Plug-in female 3/4" M 22 x 1.57C14 831 1227 Plug-in female 3/4" M 27 x 2.0

7C14 847 0400 Packing kit female 1/4"7C14 847 0600 Packing kit female 3/8"7C14 847 0800 Packing kit female 1/2"7C14 847 1200 Packing kit female 3/4"7C14 847 1600 Packing kit female 1"

7C14 811PLUG fEMALE


7C14 811 0400 Plug female 1/4"7C14 811 0600 Plug female 3/8"7C14 811 0800 Plug female 1/2"7C14 811 1200 Plug female 3/4"7C14 811 1600 Plug female 1"

7C14 812PLUG-iN kiT


7C14 812 0422 Plug-in kit 1/4" M 22 x 1.57C14 812 0624 Plug-in kit 3/8" M 24 x 1.57C14 812 0827 Plug-in kit 1/2" M 27 x 1.57C14 812 1236 Plug-in kit 3/4" M 36 x 1.5

7C14 823PLUG MALE


7C14 723 0400 Plug male 1/4"7C14 723 0600 Plug male 3/8"7C14 723 0800 Plug male 1/2"7C14 723 1200 Plug male 3/4"7C14 723 1600 Plug male 1"


7:6

HYDROSCAND FLARE FiTTiNGS

FLARE FiTTiNGS

PRODUCT GROUP 760

Steel flare fittings give a tight and safe system, even in very demanding installations.

The systems consists of three parts: adaptor, nut and clamping sleeve. Together, they connect a pipe flared to 74°. They are called JIC/SAE 37° and are equivalent to SAE J514/ISO 8434-2.

The sealing is achieved when the flared pipe end is pressed between two conical surfaces: the adaptor and the clamping sleeve.

The clamping sleeve works as a plate to prevent the nut from cutting into the pipe and also as a pipe support. It prevents the pipe from rotating during tightening of the nut, and automatically steers the flared pipe into the right position in relation to the adaptor.

The fitting can be dismantled and reassembled many times without being damaged.

By simply changing the clamping sleeve, the very same fitting can be used for either metrical or inch pipes.

The flare fittings are always delivered with a cover to protect the threads from getting damaged and keep them free from contaminations.


FLARE FiTTiNGS PAGE

TAbLE OF CONTENTS

Clamping sleeve

Adaptor

Pipe

Nut

7601 J G Straight joint fitting 2867602 J W Elbow joint fitting 2867603 J T T-joint fitting 2867604 J K Cross joint fitting 2867605 J SV Straight bulkhead 2867605-00 J LN Locknut 2877606 J WSV 90° elbow bulkhead 2877607 J USV45° elbow bulkhead 2877611 J GE Straight fitting – NPTF-thread 2877609 J TSV T-joint fitting, bulkhead 2877610 J LSV L-joint fitting, bulkhead 2877613 J GE Straight fitting – G-thread 2887614 J GE Straight fitting – UNF-thread 2887615 J GE Straight fitting – M-thread 2897620 J WE elbow fitting – NPTF-thread 2897622 J WE Adjustable fitting – G-thread 2897623 J WE Adjustable fitting – UNF-thread 2897624 J WE Adjustable fitting – M-thread 2907625 J WE Long Adjustable fitting – UNF-thread 2907630 J UE 45° Elbow fitting –NPTF-thread 2907632 J UE Adjustable 45° Elbow fitting – G-thread 2907633 J UE Adjustable 45° Elbow fitting – UNF-thread 2907640 J TE T-fitting – NPTF-thread 2907641 J TE Adjustable T-fitting – G-thread 2917642 J TE Adjustable T-fitting – UNF-thread 2917644 J LE Adjustable L-fitting – G-thread 2917645 J LE Adjustable L-fitting – UNF-thread 2917650 J GAI Straight fitting – NPTF-thread 2917651 J GAI Straight fitting – G-thread 2917658 J GI Straight adaptor with JIC 37° 2927660 J EVW 90° Elbow fitting with JIC 37° 2927659 J GII Straight adaptor with JIC 37° 2927661 J EVU 45° Elbow fitting with JIC 37° 2927662 J EVT T-fitting with JIC 37° 2927663 J EVL L-fitting with JIC 37° 2927664 J EVGE Adaptor with JIC 37° NPTF-thread 2937666 J EVGE Adaptor with JIC 37° G-thread 2937669 J EVGE Adaptor with JIC 37° M-thread 2937667 J EVGE Adaptor with JIC 37° UNF-thread 2937670 J KOR Reduction 2937680 J MAV Manometer fitting 2947681 J MA Measurement connection 2947690 J PLI Blind nut 2947691 J PLU Plug 2947692 J M Nut 2947693 J D Clamping sleeve 294

HYDROSCAND FLARE FiTTiNGS PRODUCT GROUP 760


ORDER CODES

PART NUmbERS TYPES

The part number consists of two parts.

The first four numbers show the Type (e.g. 7601 = J G, 7602 = J W).

The four last numbers show the thread size in 16-parts inches or the metric thread dimensions are shown directly (e.g. 7611-07-02 where 07 means 7/16" and 02 means 1/8").

Pipe dimension UN-thread Part no.

6 7/16–20 07

8 1/2–20 08

10 9/16–18 09

12 3/4–16 12

14|15|16 7/8–14 14

18|20 1 1/16–12 17

22 1 3/16–12 19

25 1 5/16–12 21

30|32 1 5/8–12 26

38 1 7/8–12 30

50 2 1/2–12 40

J G = Straight joint fitting J W = Elbow joint fittingJ T = T-joint fittingJ K = Cross joint fittingJ SV = BulkheadJ WSV = Elbow bulkheadJ GE = Straight fitting male threadedJ WE = 90°-elbow fitting male threadedJ UE = 45°-elbow fitting male threadedJ TE = T-fitting male threadedJ LE = L-fitting male threadedJ GAI = Straight fitting female threadedJ GI = Straight adaptor with JIC 37° swivel nutJ GII = Straight adaptor with JIC 37° swivel nut x 2J EVW = 90°-elbow fitting with JIC 37° swivel nutJ EVU = 45°-elbow fitting with JIC 37° swivel nutJ EVT = T-fitting with JIC 37° swivel nutJ EVL = L-fitting with JIC 37° swivel nutJ EVGE = Straight fitting with JIC 37° swivel nutJ KOR = ReducingJ MAV = Manometer fittingJ MA = Measurement connectionJ PLI = Blind nutJ PLU = PlugJ M = NutJ D = Clamping sleeveJ = JICJ LN = LocknutJ USV = 45°-elbow bulkheadJ TSV = T-fitting bulkheadJ LSV = L-fitting bulkhead

Pressure ratings FLARE FiTTiNGS, mPaEquivalent to SAEJ1065

Safety factor: 4:1

JIC 37° UN O-ring G (BSP) O-ring + support ring M (BSP) O-ring + Washer

Pipe Not adjustable Adjustable Thread Not adjustable Adjustable Thread Not adjustable Adjustable

6 35 31.5 31.5 G 1/8" 31.5 20.0 10 x 1.0 31.5 20

8 35 31.5 31.5 G 1/4" 31.5 20.0 12 x 1.5 31.5 20

10 25 31.5 25.0 G 3/8" 31.5 20.0 14 x 1.5 31.5 20

12 25 31.5 25.0 G 1/2" 25.0 20.0 16 x 1.5 31.5 20

16 25 20.0 20.0 G 5/8" 25.0 20.0 22 x 1.5 25.0 20

20 20 25.0 20.0 G 3/4" 25.0 20.0 27 x 1.5 25.0 20

25 20 16.0 20.0 G 1" 25.0 20.0 33 x 2.0 25.0 20

32 16 12.5 16.0 G 1 1/4" 16.0 16.0 42 x 2.0 16.0 16

38 10 16.0 12.5 G1 1/2" 16.0 16.0 48 x 2.0 16.0 16

50 8 12.5 10.0 G 2" 12.5 10.0 60 x 2.0 12.5 10

PRODUCT GROUP 760 HYDROSCAND FLARE FiTTiNGS


7:6

ASSEmbLY iNSTRUCTiONS

PipesUse seamless, cold-drawn and normalised precision steel pipes to get the best result of bending and flaring (DIN 2391 C). Make sure the pipes do not have any internal scratches.

Flanging1. Cut the tube perpendicularly and deburr it both

internally and externally. Make sure the pipe is of the correct dimension (inch/mm); of the right quality; and has no damages.

2. Apply the nut and then the clamping sleeve onto the tube end. The open threaded part of the nut should be faced towards the tube end. Flare the tube with a flaring tool in order to create a flare of 37°.

3. The largest flare diameter (D) should be as large as the outer diameter of the clamping sleeve. The smallest flare diameter (D) should be as small as the largest inner diameter of the clamping sleeve. See also the table to the right.

If the flare is too small, the whole surface of the fitting cannot be used and the flare is then stretched thinner because of the smaller surface. Pipes with a flare too large can get stuck in the threads of the nut during as-sembly.

To achieve a perfect fit, the flare must be perpendicular and concentric with the pipe and the clamping sleeve. If the flare is inclined or excentric, the tube was angle-cut and unequally shaped during the flaring.

Cracks might appear when the wrong pipe quality or too hard materials have been used. This can also be the result of internal scratches.

A correct flaring ensures a long operation period without interference even during hard working conditions.

AssemblingFasten the pipe flare between clamping sleeve and fitting flare by manually tightening the nut to metal contact. Then follow the FFWR as shown in the tightening torque to the right.

Flare fittings are easy to dismantle and reassemble several times; and they always gives a solid and safe enclosure.

Tightening torque

Flaring diameters

Clamping sleeve external diameter

ø D

Clamping sleeve internal diameter

ø d

Pipe dim. ThreadFFWR hose

FFWR pipe

6 7/16" – 20 UNF 2 28 1/2" – 20 UNF 2 2

10 9/16" – 18 UNF 2 1 1/212 3/4" – 16 UNF 2 1 1/2

14, 15, 16 7/8" – 14 UNF 1 1/2 1 1/218, 20 1.1/16" – 12 UN 1 1 1/4

25 1.5/16" – 12 UN 1 130, 32 1.5/8" – 12 UN 1 1

38 1.7/8" – 12 UN 1 150 2.1/2" – 12 UN 1 1

FFWR Flats From Wrench Resistance Metal contact between the cones, always use an appropriate wrench.

Pipe mm O.D. inch

Flanging

d (min) D (max)

6 1/4" 8.0 9.78 5/16" 9.5 11.3

10 3/8" 11.2 12.712 1/2" 14.9 17.314 17.9 20.215 17.9 20.216 5/8" 17.9 20.218 22.3 24.720 3/4" 22.3 24.725 1" 28.7 31.030 35.8 38.932 1 1/4" 35.8 38.938 1 1/2" 41.4 45.3

Assembly towards pipe

Assembly on svivel nut



7601J G

STRAiGHT JOiNT FiTTiNG

7602J W

ELbOW JOiNT FiTTiNG

7603J T

T-JOiNT FiTTiNG

7604J K

CROSS JOiNT FiTTiNG

Part number Type Pipe dim.1 (mm) Pipe dim.2 (mm)

Part number Type Pipe dim. (mm)



7601-07-07 J G 6 67601-07-08 J G 6 87601-07-09 J G 6 107601-08-08 J G 8 87601-08-09 J G 8 107601-08-12 J G 8 127601-08-14 J G 8 14|15|167601-09-09 J G 10 107601-09-12 J G 10 127601-09-14 J G 10 14|15|167601-09-17 J G 10 18|207601-12-12 J G 12 127601-12-14 J G 12 14|15|167601-12-17 J G 12 18|207601-14-14 J G 14|15|16 14|15|167601-14-17 J G 14|15|16 18|207601-14-21 J G 14|15|16 257601-17-17 J G 18|20 18|207601-17-19 J G 18|20 227601-17-21 J G 18|20 257601-17-26 J G 18|20 30|327601-19-19 J G 22 227601-19-21 J G 22 257601-21-21 J G 25 257601-21-26 J G 25 30|327601-26-26 J G 30|32 30|327601-26-30 J G 30|32 387601-30-30 J G 38 387601-40-40 J G 50 50

7602-07-07 J W 67602-08-08 J W 87602-09-09 J W 107602-12-12 J W 127602-14-14 J W 14|15|167602-17-17 J W 18|207602-19-19 J W 227602-21-21 J W 257602-26-26 J W 30|327602-30-30 J W 38

7603-07-07 J T 67603-08-08 J T 87603-09-09 J T 107603-12-12 J T 127603-14-14 J T 14|15|167603-17-17 J T 18|207603-19-19 J T 227603-21-21 J T 257603-26-26 J T 30|327603-30-30 J T 38

7604-07-07 J K 67604-09-09 J K 107604-12-12 J K 127604-14-14 J K 14|15|167604-17-17 J K 18|207604-21-21 J K 25

7605J SV

STRAiGHT bULKHEAD


7605-07-07 J SV 67605-08-08 J SV 87605-09-09 J SV 107605-12-12 J SV 127605-14-14 J SV 14|15|167605-17-17 J SV 18|207605-21-21 J SV 257605-26-26 J SV 30|327605-30-30 J SV 387605-40-40 J SV 50



7:6

7605-00J LN

LOCKNUT


7605-00-07 J LN 67605-00-08 J LN 87605-00-09 J LN 107605-00-12 J LN 127605-00-14 J LN 14|15|167605-00-17 J LN 18|207605-00-21 J LN 257605-00-26 J LN 30|327605-00-30 J LN 387605-00-40 J LN 50

7606J WSV

90° ELbOW bULKHEAD


7606-07-07 J WSV 67606-08-08 J WSV 87606-09-09 J WSV 107606-12-12 J WSV 127606-14-14 J WSV 14|15|167606-17-17 J WSV 18|207606-21-21 J WSV 257606-26-26 J WSV 30|327606-30-30 J WSV 38

7607J USV

45° ELbOW bULKHEAD

7609J TSV

T-JOiNT FiTTiNG, bULKHEAD



7607-07-07 J USV 67607-08-08 J USV 87607-09-09 J USV 107607-12-12 J USV 127607-14-14 J USV 14|15|167607-17-17 J USV 18|207607-21-21 J USV 25

7609-07-07 J TSV 67609-08-08 J TSV 87609-09-09 J TSV 107609-12-12 J TSV 127609-14-14 J TSV 14|15|167609-17-17 J TSV 18|207609-21-21 J TSV 257609-26-26 J TSV 30|327609-30-30 J TSV 38

7610J LSV

L-JOiNT FiTTiNG, bULKHEAD

7611J GE

STRAiGHT FiTTiNG – NPTF-THREAD


Part number Type Pipe dim. (mm) Thread

7610-07-07 J LSV 67610-09-09 J LSV 107610-12-12 J LSV 127610-14-14 J LSV 14|15|16

7611-07-02 J GE 6 1/8"-27 NPTF7611-07-04 J GE 6 1/4"-18 NPTF7611-07-06 J GE 6 3/8"-18 NPTF7611-07-08 J GE 6 1/2"-14 NPTF7611-08-02 J GE 8 1/8"-27 NPTF7611-08-04 J GE 8 1/4"-18 NPTF7611-08-06 J GE 8 3/8"-18 NPTF7611-09-02 J GE 10 1/8"-27 NPTF7611-09-04 J GE 10 1/4"-18 NPTF7611-09-06 J GE 10 3/8"-18 NPTF7611-09-08 J GE 10 1/2"-14 NPTF7611-12-04 J GE 12 1/4"-18 NPTF7611-12-06 J GE 12 3/8"-18 NPTF7611-12-08 J GE 12 1/2"-14 NPTF7611-12-12 J GE 12 3/4"-14 NPTF7611-14-06 J GE 14|15|16 3/8"-18 NPTF7611-14-08 J GE 14|15|16 1/2"-14 NPTF7611-14-12 J GE 14|15|16 3/4"-14 NPTF7611-17-08 J GE 18|20 1/2"-14 NPTF7611-17-12 J GE 18|20 3/4"-14 NPTF7611-17-16 J GE 18|20 1"-11½ NPTF7611-21-08 J GE 25 1/2"-14 NPTF7611-21-12 J GE 25 3/4"-14 NPTF7611-21-16 J GE 25 1"-11½ NPTF7611-21-20 J GE 25 1 1/4"-11½ NPTF7611-26-16 J GE 30|32 1"-11½ NPTF7611-26-20 J GE 30|32 1 1/4"-11½ NPTF7611-30-20 J GE 38 1 1/4"-11½ NPTF7611-30-24 J GE 38 1 1/2"-11½ NPTF7611-40-32 J GE 50 2"-11½ NPTF



7613J GE STRAiGHT

FiTTiNG – G-THREAD

With O-ring and washer

7614J GE STRAiGHT

FiTTiNG – UNF-THREAD

With O-ring

Part number Type Pipe dim. (mm) Thread Part number Type Pipe dim. (mm) Thread

7613-07-02 J GE 6 G 1/8" M7613-07-04 J GE 6 G 1/4" M7613-07-06 J GE 6 G 3/8" M7613-07-08 J GE 6 G 1/2" M7613-08-02 J GE 8 G 1/8" M7613-08-04 J GE 8 G 1/4" M7613-08-06 J GE 8 G 3/8" M7613-09-02 J GE 10 G 1/8" M7613-09-04 J GE 10 G 1/4" M7613-09-06 J GE 10 G 3/8" M7613-09-08 J GE 10 G 1/2" M7613-12-04 J GE 12 G 1/4" M7613-12-06 J GE 12 G 3/8" M7613-12-08 J GE 12 G 1/2" M7613-12-12 J GE 12 G 3/4" M7613-14-06 J GE 14|15|16 G 3/8" M7613-14-08 J GE 14|15|16 G 1/2" M7613-14-12 J GE 14|15|16 G 3/4" M7613-17-06 J GE 18|20 G 3/8" M7613-17-08 J GE 18|20 G 1/2" M7613-17-12 J GE 18|20 G 3/4" M7613-17-16 J GE 18|20 G 1" M7613-19-12 J GE 22 G 3/4" M7613-21-08 J GE 25 G 1/2" M7613-21-12 J GE 25 G 3/4" M7613-21-16 J GE 25 G 1" M7613-21-20 J GE 25 G 1 1/4" M7613-21-24 J GE 25 G 1 1/2" M7613-26-16 J GE 30|32 G 1" M7613-26-20 J GE 30|32 G 1 1/4" M7613-26-24 J GE 30|32 G 1 1/2" M7613-30-16 J GE 38 G 1" M7613-30-20 J GE 38 G 1 1/4" M7613-30-24 J GE 38 G 1 1/2" M

7614-07-07 J GE 6 7/16"-20 UNF7614-07-08 J GE 6 1/2"-20 UNF7614-07-09 J GE 6 9/16"-18 UNF7614-07-12 J GE 6 3/4"-16 UNF7614-08-08 J GE 8 1/2"-20 UNF7614-09-07 J GE 10 7/16"-20 UNF7614-09-09 J GE 10 9/16"-18 UNF7614-09-12 J GE 10 3/4"-16 UNF7614-09-14 J GE 10 7/8"-14 UNF7614-12-08 J GE 12 1/2"-20 UNF7614-12-09 J GE 12 9/16"-18 UNF7614-12-12 J GE 12 3/4"-16 UNF7614-12-14 J GE 12 7/8"-14 UNF7614-12-17 J GE 12 1 1/16"-12 UNF7614-12-21 J GE 12 1 5/16"-12 UNF7614-14-12 J GE 14|15|16 3/4"-16 UNF7614-14-14 J GE 14|15|16 7/8"-14 UNF7614-14-17 J GE 14|15|16 1 1/16"-12 UNF7614-14-21 J GE 14|15|16 1 5/16"-12 UNF7614-17-12 J GE 18|20 3/4"-16 UNF7614-17-14 J GE 18|20 7/8"-14 UNF7614-17-17 J GE 18|20 1 1/16"-12 UNF7614-17-19 J GE 18|20 1 3/16"-12 UNF7614-17-21 J GE 18|20 1 5/16"-12 UNF7614-19-19 J GE 22 1 3/16"-12 UNF7614-21-14 J GE 25 7/8"-14 UNF7614-21-17 J GE 25 1 1/16"-12 UNF7614-21-21 J GE 25 1 5/16"-12 UNF7614-21-26 J GE 25 1 5/8"-12 UNF7614-26-21 J GE 30|32 1 5/16"-12 UNF7614-26-26 J GE 30|32 1 5/8"-12 UNF7614-26-30 J GE 30|32 1 7/8"-12 UNF7614-30-26 J GE 38 1 5/8"-12 UNF7614-30-30 J GE 38 1 7/8"-12 UNF7614-40-30 J GE 50 1 7/8"-12 UNF



7:6

7615J GE STRAiGHT

FiTTiNG – m-THREAD


7622J WE ADJUSTAbLE



7623J WE ADJUSTAbLE


With O-ring


Part number Type Pipe dim. (mm) ThreadPart number Type Pipe dim. (mm) Thread

7615-07-10 J GE 6 M 10 x 1.07615-07-12 J GE 6 M 12 x 1.57615-07-14 J GE 6 M 14 x 1.57615-08-12 J GE 8 M 12 x 1.57615-08-14 J GE 8 M 14 x 1.57615-09-14 J GE 10 M 14 x 1.57615-09-16 J GE 10 M 16 x 1.57615-12-14 J GE 12 M 14 x 1.57615-12-16 J GE 12 M 16 x 1.57615-12-18 J GE 12 M 18 x 1.57615-12-22 J GE 12 M 22 x 1.57615-12-26 J GE 12 M 26 x 1.57615-14-16 J GE 14|15|16 M 16 x 1.57615-14-18 J GE 14|15|16 M 18 x 1.57615-14-22 J GE 14|15|16 M 22 x 1.57615-17-18 J GE 18|20 M 18 x 1.57615-17-22 J GE 18|20 M 22 x 1.57615-17-26 J GE 18|20 M 26 x 1.57615-17-27 J GE 18|20 M 27 x 2.07615-21-22 J GE 25 M 22 x 1.57615-21-33 J GE 25 M 33 x 2.07615-26-42 J GE 30|32 M 42 x 2.0

7622-07-02 J WE 6 G 1/8" M7622-07-04 J WE 6 G 1/4" M7622-08-04 J WE 8 G 1/4" M7622-09-04 J WE 10 G 1/4" M7622-09-06 J WE 10 G 3/8" M7622-09-08 J WE 10 G 1/2" M7622-12-04 J WE 12 G 1/4" M7622-12-06 J WE 12 G 3/8" M7622-12-08 J WE 12 G 1/2" M7622-12-12 J WE 12 G 3/4" M7622-14-06 J WE 14|15|16 G 3/8" M7622-14-08 J WE 14|15|16 G 1/2" M7622-14-12 J WE 14|15|16 G 3/4" M7622-17-08 J WE 18|20 G 1/2" M7622-17-12 J WE 18|20 G 3/4" M7622-17-16 J WE 18|20 G 1" M7622-21-12 J WE 25 G 3/4" M7622-21-16 J WE 25 G 1" M7622-21-20 J WE 25 G 1 1/4" M7622-26-16 J WE 30|32 G 1" M7622-26-20 J WE 30|32 G 1 1/4" M7622-30-20 J WE 38 G 1 1/4" M7622-30-24 J WE 38 G 1 1/2" M

7623-07-07 J WE 6 7/16"-20 UNF7623-07-08 J WE 6 1/2"-20 UNF7623-07-09 J WE 6 9/16"-18 UNF7623-08-08 J WE 8 1/2"-20 UNF7623-09-09 J WE 10 9/16"-18 UNF7623-09-12 J WE 10 3/4"-16 UNF7623-12-09 J WE 12 9/16"-18 UNF7623-12-12 J WE 12 3/4"-16 UNF7623-12-14 J WE 12 7/8"-14 UNF7623-12-17 J WE 12 1 1/16"-12 UNF7623-14-12 J WE 14|15|16 3/4"-16 UNF7623-14-14 J WE 14|15|16 7/8"-14 UNF7623-14-17 J WE 14|15|16 1 1/16"-12 UNF7623-17-12 J WE 18|20 3/4"-16 UNF7623-17-14 J WE 18|20 7/8"-14 UNF7623-17-17 J WE 18|20 1 1/16"-12 UNF7623-17-21 J WE 18|20 1 5/16"-12 UNF7623-21-14 J WE 25 7/8"-14 UNF7623-21-17 J WE 25 1 1/16"-12 UNF7623-21-21 J WE 25 1 5/16"-12 UNF7623-26-26 J WE 30|32 1 5/8"-12 UNF7623-30-30 J WE 38 1 7/8"-12 UNF

7620-07-02 J WE 6 1/8"-27 NPTF7620-07-04 J WE 6 1/4"-18 NPTF7620-07-06 J WE 6 3/8"-18 NPTF7620-07-08 J WE 6 1/2"-14 NPTF7620-08-02 J WE 8 1/8"-27 NPTF7620-08-04 J WE 8 1/4"-18 NPTF7620-09-02 J WE 10 1/8"-27 NPTF7620-09-04 J WE 10 1/4"-18 NPTF7620-09-06 J WE 10 3/8"-18 NPTF7620-09-08 J WE 10 1/2"-14 NPTF7620-12-04 J WE 12 1/4"-18 NPTF7620-12-06 J WE 12 3/8"-18 NPTF7620-12-08 J WE 12 1/2"-14 NPTF7620-12-12 J WE 12 3/4"-14 NPTF7620-12-16 J WE 12 1"-11½ NPTF7620-14-06 J WE 14|15|16 3/8"-18 NPTF7620-14-08 J WE 14|15|16 1/2"-14 NPTF7620-14-12 J WE 14|15|16 3/4"-14 NPTF7620-17-08 J WE 18|20 1/2"-14 NPTF7620-17-12 J WE 18|20 3/4"-14 NPTF7620-17-16 J WE 18|20 1"-11½ NPTF7620-21-12 J WE 25 3/4"-14 NPTF7620-21-16 J WE 25 1"-11½ NPTF7620-26-16 J WE 30|32 1"-11½ NPTF7620-26-20 J WE 30|32 1 1/4"-11½ NPTF7620-30-24 J WE 38 1 1/2"-11½ NPTF

7620J WE

ELbOW FiTTiNG – NPTF-THREAD



7624J WE ADJUSTAbLE

FiTTiNG – m-THREAD

With O-ring and washer. DIN 3852 P.1

7632J UE ADJUSTAbLE 45° ELbOW



7633J UE ADJUSTAbLE 45° ELbOW


With O-ring

7640J TE

T-FiTTiNG – NPTF-THREAD

7630J UE

45° ELbOW FiTTiNG –NPTF-THREAD

7625J WE LONG ADJUSTAbLE FiTTiNG – UNF-THREAD

With O-ring






7624-07-10 J WE 6 M 10 x 1.07624-08-12 J WE 8 M 12 x 1.57624-09-14 J WE 10 M 14 x 1.57624-12-14 J WE 12 M 14 x 1.57624-12-16 J WE 12 M 16 x 1.57624-12-18 J WE 12 M 18 x 1.57624-14-18 J WE 14|15|16 M 18 x 1.57624-14-20 J WE 14|15|16 M 20 x 1.57624-14-22 J WE 14|15|16 M 22 x 1.57624-14-26 J WE 14|15|16 M 26 x 1.57624-17-22 J WE 18|20 M 22 x 1.57624-17-27 J WE 18|20 M 27 x 2.07624-21-33 J WE 25 M 33 x 2.07624-26-42 J WE 30|32 M 42 x 2.0

7632-07-02 J UE 6 G 1/8" M7632-07-04 J UE 6 G 1/4" M7632-08-04 J UE 8 G 1/4" M7632-09-04 J UE 10 G 1/4" M7632-09-06 J UE 10 G 3/8" M7632-12-06 J UE 12 G 3/8" M7632-12-08 J UE 12 G 1/2" M7632-14-06 J UE 14|15|16 G 3/8" M7632-14-08 J UE 14|15|16 G 1/2" M7632-14-12 J UE 14|15|16 G 3/4" M7632-17-08 J UE 18|20 G 1/2" M7632-17-12 J UE 18|20 G 3/4" M7632-17-16 J UE 18|20 G 1" M7632-21-16 J UE 25 G 1" M7632-21-20 J UE 25 G 1 1/4" M7632-30-24 J UE 38 G 1 1/2" M

7633-07-07 J UE 6 7/16"-20 UNF7633-07-09 J UE 6 9/16"-18 UNF7633-08-08 J UE 8 1/2"-20 UNF7633-09-09 J UE 10 9/16"-18 UNF7633-12-09 J UE 12 9/16"-18 UNF7633-12-12 J UE 12 3/4"-16 UNF7633-14-12 J UE 14|15|16 3/4"-16 UNF7633-14-14 J UE 14|15|16 7/8"-14 UNF7633-14-17 J UE 14|15|16 1 1/16"-12 UNF7633-17-17 J UE 18|20 1 1/16"-12 UNF7633-17-21 J UE 18|20 1 5/16"-12 UNF7633-21-17 J UE 25 1 1/16"-12 UNF7633-21-26 J UE 25 1 5/8"-12 UNF7633-26-26 J UE 30|32 1 5/8"-12 UNF7633-30-30 J UE 38 1 7/8"-12 UNF

7640-07-04 J TE 6 1/4"-18 NPTF7640-09-04 J TE 10 1/4"-18 NPTF7640-12-08 J TE 12 1/2"-14 NPTF7640-17-12 J TE 18|20 3/4"-14 NPTF7640-21-16 J TE 25 1"-11 1/2 NPTF

7630-07-02 J UE 6 1/8"-27 NPTF7630-07-04 J UE 6 1/4"-18 NPTF7630-07-06 J UE 6 3/8"-18 NPTF7630-08-02 J UE 8 1/8"-27 NPTF7630-09-04 J UE 10 1/4"-18 NPTF7630-09-06 J UE 10 3/8"-18 NPTF7630-09-08 J UE 10 1/2"-14 NPTF7630-12-04 J UE 12 1/4"-18 NPTF7630-12-06 J UE 12 3/8"-18 NPTF7630-12-08 J UE 12 1/2"-14 NPTF7630-14-08 J UE 14|15|16 1/2"-14 NPTF7630-14-12 J UE 14|15|16 3/4"-14 NPTF7630-17-08 J UE 18|20 1/2"-14 NPTF7630-17-12 J UE 18|20 3/4"-14 NPTF7630-17-16 J UE 18|20 1"-11½ NPTF7630-21-12 J UE 25 3/4"-14 NPTF7630-21-16 J UE 25 1"-11½ NPTF7630-26-20 J UE 30|32 1 1/4"-11½ NPTF7630-30-24 J UE 38 1 1/2"-11½ NPTF

7625-07-07 J WE Long 6 7/16"7625-09-09 J WE Long 10 9/16"7625-12-12 J WE Long 12 3/4"7625-21-21 J WE Long 25 1 5/16"



7:6

7641J TE ADJUSTAbLE T-FiTTiNG –

G-THREAD


7642J TE ADJUSTAbLE T-FiTTiNG –

UNF-THREAD

With O-ring

7644J LE ADJUSTAbLE L-FiTTiNG –

G-THREAD


7645J LE ADJUSTAbLE L-FiTTiNG –

UNF-THREAD

With O-ring

7650J GAi

STRAiGHT FiTTiNG – NPTF-THREAD

7651J GAi

STRAiGHT FiTTiNG – G-THREAD







7641-07-02 J TE 6 G 1/8" M7641-07-04 J TE 6 G 1/4" M7641-08-02 J TE 8 G 1/8" M7641-09-04 J TE 10 G 1/4" M7641-09-06 J TE 10 G 3/8" M7641-12-06 J TE 12 G 3/8" M7641-12-08 J TE 12 G 1/2" M7641-14-08 J TE 14|15|16 G 1/2" M7641-17-12 J TE 18|20 G 3/4" M7641-17-16 J TE 18|20 G 1" M7641-21-16 J TE 25 G 1" M7641-26-20 J TE 30|32 G 1 1/4" M7641-30-24 J TE 38 G 1 1/2" M

7642-07-07 J TE 6 7/16"-20 UNF7642-08-08 J TE 8 1/2"-20 UNF7642-09-09 J TE 10 9/16"-18 UNF7642-12-12 J TE 12 3/4"-16 UNF7642-14-14 J TE 14|15|16 7/8"-14 UNF7642-17-17 J TE 18|20 1 1/16"-12 UNF7642-21-21 J TE 25 1 5/16"-12 UNF

7644-07-02 J LE 6 G 1/8" M7644-07-04 J LE 6 G 1/4" M7644-08-02 J LE 8 G 1/8" M7644-08-04 J LE 8 G 1/4" M7644-09-04 J LE 10 G 1/4" M7644-09-06 J LE 10 G 3/8" M7644-12-06 J LE 12 G 3/8" M7644-12-08 J LE 12 G 1/2" M7644-14-08 J LE 14|15|16 G 1/2" M7644-14-12 J LE 14|15|16 G 3/4" M7644-17-12 J LE 18|20 G 3/4" M7644-21-16 J LE 25 G 1" M7644-26-20 J LE 30|32 G 1 1/4" M7644-30-24 J LE 38 G 1 1/2" M

7645-07-07 J LE 6 7/16"-20 UNF7645-07-09 J LE 6 9/16"-20 UNF7645-08-08 J LE 8 1/2"-20 UNF7645-09-09 J LE 10 9/16"-20 UNF7645-12-12 J LE 12 3/4"-20 UNF7645-14-14 J LE 14|15|16 7/8"-20 UNF7645-17-17 J LE 18|20 1 1/16"-20 UNF7645-21-21 J LE 25 1 5/16"-20 UNF

7650-07-02 J GAI 6 1/8"-27 NPTF7650-07-04 J GAI 6 1/4"-18 NPTF7650-08-02 J GAI 8 1/8"-27 NPTF7650-08-04 J GAI 8 1/4"-18 NPTF7650-09-04 J GAI 10 1/4"-18 NPTF7650-09-06 J GAI 10 3/8"-18 NPTF7650-12-06 J GAI 12 3/8"-18 NPTF7650-14-08 J GAI 14|15|16 1/2"-14 NPTF7650-17-08 J GAI 18|20 1/2"-14 NPTF7650-17-12 J GAI 18|20 3/4"-14 NPTF7650-21-16 J GAI 25 1"-11½ NPTF

7651-07-02 J GAI 6 G 1/8" F7651-07-04 J GAI 6 G 1/4" F7651-08-02 J GAI 8 G 1/8" F7651-08-04 J GAI 8 G 1/4" F7651-09-04 J GAI 10 G 1/4" F7651-09-06 J GAI 10 G 3/8" F7651-09-08 J GAI 10 G 1/2" F7651-12-06 J GAI 12 G 3/8" F7651-12-08 J GAI 12 G 1/2" F7651-14-08 J GAI 14|15|16 G 1/2" F7651-17-08 J GAI 18|20 G 1/2" F7651-17-12 J GAI 18|20 G 3/4" F7651-21-16 J GAI 25 G 1" F7651-26-16 J GAI 30|32 G 1" F7651-26-20 J GAI 30|32 G 1 1/4" F7651-30-24 J GAI 38 G 1 1/2" F



7658J Gi STRAiGHT ADAPTOR

WiTH JiC 37°

Swivel nut

Pipe dim.1 Pipe dim.2 Part number Type male (mm) female (mm)

7658-07-07 J GI 6 67658-08-09 J GI 8 107658-09-09 J GI 10 107658-12-09 J GI 12 107658-12-12 J GI 12 127658-14-14 J GI 14|15|16 14|15|167658-17-17 J GI 18|20 18|207658-19-19 J GI 22 227658-21-21 J GI 25 257658-26-26 J GI 30|32 30|327658-40-30 J GI 50 38

7659J Gii STRAiGHT ADAPTOR

WiTH JiC 37°

Swivel nut


7659-07-07 J GII 6 67659-07-09 J GII 6 107659-08-08 J GII 8 87659-09-09 J GII 10 107659-12-12 J GII 12 127659-14-14 J GII 14|15|16 14|15|167659-17-17 J GII 18|20 18|207659-21-21 J GII 25 25

7660J EVW

90° ELbOW FiTTiNG WiTH JiC 37°

Swivel nut

7661J EVU 45° ELbOW FiTTiNG

WiTH JiC 37°

Swivel nut



7660-07-07 J EVW 67660-08-08 J EVW 87660-09-09 J EVW 107660-12-12 J EVW 127660-14-14 J EVW 14|15|167660-17-17 J EVW 18|207660-19-19 J EVW 227660-21-21 J EVW 257660-26-26 J EVW 30|327660-30-30 J EVW 38

7661-07-07 J EVU 67661-08-08 J EVU 87661-09-09 J EVU 107661-12-12 J EVU 127661-14-14 J EVU 14|15|167661-17-17 J EVU 18|207661-21-21 J EVU 257661-26-26 J EVU 30|327661-30-30 J EVU 38

7662J EVT

T-FiTTiNG WiTH JiC 37°

Swivel nut


7662-07-07 J EVT 67662-08-08 J EVT 87662-09-09 J EVT 107662-12-12 J EVT 127662-14-14 J EVT 14|15|167662-17-17 J EVT 18|207662-21-21 J EVT 257662-26-26 J EVT 30|327662-30-30 J EVT 38

7663J EVL

L-FiTTiNG WiTH JiC 37°

Swivel nut


7663-07-07 J EVL 67663-08-08 J EVL 87663-09-09 J EVL 107663-12-12 J EVL 127663-14-14 J EVL 14|15|167663-17-17 J EVL 18|207663-21-21 J EVL 257663-26-26 J EVL 30|327663-30-30 J EVL 38



7:6

7664J EVGE ADAPTOR

WiTH JiC 37° NPTF-THREAD

Swivel nut

7666J EVGE ADAPTOR

WiTH JiC 37° G-THREAD

Swivel nut. With O-ring and washer

7669J EVGE ADAPTOR

WiTH JiC 37° m-THREAD


7667J EVGE ADAPTOR

WiTH JiC 37° UNF-THREAD

Swivel nut. With O-ring





7664-07-04 J EVGE 6 1/4"-18 NPTF7664-08-04 J EVGE 8 1/4"-18 NPTF7664-09-06 J EVGE 10 3/8"-18 NPTF7664-12-06 J EVGE 12 3/8"-18 NPTF7664-14-08 J EVGE 14|15|16 1/2"-14 NPTF7664-17-08 J EVGE 18|20 1/2"-14 NPTF7664-17-12 J EVGE 18|20 3/4"-14 NPTF7664-21-12 J EVGE 25 3/4"-14 NPTF7664-21-16 J EVGE 25 1"-11½ NPTF7664-26-20 J EVGE 30|32 1 1/4"-11½ NPTF

7666-07-02 J EVGE 6 G 1/8" M7666-07-04 J EVGE 6 G 1/4" M7666-08-04 J EVGE 8 G 1/4" M7666-09-04 J EVGE 10 G 1/4" M7666-09-06 J EVGE 10 G 3/8" M7666-09-08 J EVGE 10 G 1/2" M7666-12-04 J EVGE 12 G 1/4" M7666-12-06 J EVGE 12 G 3/8" M7666-12-08 J EVGE 12 G 1/2" M7666-14-06 J EVGE 14|15|16 G 3/8" M7666-14-08 J EVGE 14|15|16 G 1/2" M7666-14-10 J EVGE 14|15|16 G 5/8" M7666-14-12 J EVGE 14|15|16 G 3/4" M7666-17-08 J EVGE 18|20 G 1/2" M7666-17-12 J EVGE 18|20 G 3/4" M7666-17-16 J EVGE 18|20 G 1" M7666-21-12 J EVGE 25 G 3/4" M7666-21-16 J EVGE 25 G 1" M7666-21-20 J EVGE 25 G 1 1/4" M7666-26-16 J EVGE 30|32 G 1" M7666-26-20 J EVGE 30|32 G 1 1/4" M7666-30-20 J EVGE 38 G 1 1/4" M7666-30-24 J EVGE 38 G 1 1/2" M

7669-07-10 J EVGE 6 M 10 x 1.07669-12-18 J EVGE 12 M 18 x 1.5

7667-07-07 J EVGE 6 7/16"-20 UNF7667-07-09 J EVGE 6 9/16"-18 UNF7667-08-08 J EVGE 8 1/2"-20 UNF7667-09-09 J EVGE 10 9/16"-18 UNF7667-12-09 J EVGE 12 9/16"-18 UNF7667-12-12 J EVGE 12 3/4"-16 UNF7667-12-14 J EVGE 12 7/8"-14 UNF7667-12-17 J EVGE 12 1 1/16"-12 UNF7667-14-14 J EVGE 14|15|16 7/8"-14 UNF7667-17-17 J EVGE 18|20 1 1/16"-12 UNF7667-21-21 J EVGE 25 1 5/16"-12 UNF7667-26-26 J EVGE 30|32 1 5/8"-12 UNF

7670J KOR

REDUCTiON


7670-08-07 J KOR 8 67670-09-07 J KOR 10 67670-09-08* J KOR 10 87670-12-07 J KOR 12 67670-12-08 J KOR 12 87670-12-09 J KOR 12 107670-14-07 J KOR 14|15|16 67670-14-08 J KOR 14|15|16 87670-14-09 J KOR 14|15|16 107670-14-12* J KOR 14|15|16 127670-17-07 J KOR 18|20 67670-17-08 J KOR 18|20 87670-17-09 J KOR 18|20 107670-17-12 J KOR 18|20 127670-17-14* J KOR 18|20 14|15|167670-19-17* J KOR 22 18|207670-21-09 J KOR 25 107670-21-12 J KOR 25 127670-21-14 J KOR 25 14|15|167670-21-17 J KOR 25 18|207670-26-12 J KOR 30|32 127670-26-14 J KOR 30|32 14|15|167670-26-17 J KOR 30|32 18|207670-26-21 J KOR 30|32 257670-30-14 J KOR 38 14|15|167670-30-17 J KOR 38 18|207670-30-21 J KOR 38 257670-30-26 J KOR 38 30|32

* The reduction is made in one piece. The others use a nut from the fitting on which the reduction has been assembled.

*



7680J mAV

mANOmETER FiTTiNG

Including sealing washer

7690J PLi

bLiND NUT

7691J PLU PLUG

7692J m NUT





7680-07-04 J MAV 6 G 1/4" F7680-07-08 J MAV 6 G 1/2" F7680-08-04 J MAV 8 G 1/4" F7680-08-08 J MAV 8 G 1/2" F7680-09-04 J MAV 10 G 1/4" F7680-12-04 J MAV 12 G 1/4" F7680-12-08 J MAV 12 G 1/2" F

Loose sealing washer:6103-13-04 Sealing washer 1/4"6603-13-08 Sealing washer 1/2"

7690-00-07 J PLI 67690-00-08 J PLI 87690-00-09 J PLI 107690-00-12 J PLI 127690-00-14 J PLI 14|15|167690-00-17 J PLI 18|207690-00-19 J PLI 227690-00-21 J PLI 257690-00-26 J PLI 30|327690-00-30 J PLI 38

7691-00-07 J PLU 67691-00-08 J PLU 87691-00-09 J PLU 107691-00-12 J PLU 127691-00-14 J PLU 14|15|167691-00-17 J PLU 18|207691-00-19 J PLU 227691-00-21 J PLU 257691-00-26 J PLU 30|327691-00-30 J PLU 38

7692-00-07 J M 67692-00-08 J M 87692-00-09 J M 107692-00-12 J M 127692-00-14 J M 14|15|167692-00-18 J M 18|207692-00-19 J M 227692-00-21 J M 257692-00-26 J M 30|327692-00-30 J M 38

7693J D

CLAmPiNG SLEEVE


7693-00-06 J D 67693-00-08 J D 87693-00-10 J D 107693-00-12 J D 127693-00-14 J D 147693-00-15 J D 157693-00-16 J D 167693-00-18 J D 187693-00-20 J D 207693-00-22 J D 227693-00-25 J D 257693-00-30 J D 307693-00-32 J D 327693-00-38 J D 38

7681J mA

mEASUREmENT CONNECTiON


7681-08-04 J MA 8 G 1/4" F7681-09-04 J MA 10 G 1/4" F7681-12-04 J MA 12 G 1/4" F7681-14-04 J MA 14|15|16 G 1/4" F7681-17-04 J MA 18|20 G 1/4" F7681-21-04 J MA 25 G 1/4" F7681-26-04 J MA 30|32 G 1/4" F7681-30-04 J MA 38 G 1/4" F


7:7

HYDROSCAND ORFS COUPLiNGS

ORFS COUPLiNGS

PRODUCT GROUP 770

* OurORFSfittingsareequivalenttoSAEJ1453andISO8434-3.

* Thefittingshandlehighpressureupto63.0MPa,withasafetyfactorof4:1.Theyarealsoresistanttovibra-tionsandsystemimpulses.

* ThesealingbetweenpipeandadapteriscreatedbyaO-ring,whichgivesasafeunit.

* Thefittingcanbedismantledandassembledmultipletimeswithoutdeteriorationoftheunit.TheonlythingthatneedstobechangedistheO-ring.

* Comparedtoothertypesofsteelpipefittings,theORFSfittingisveryresistanttoover-torque.Thismakesacorrectassemblingeasier,evenforuntrainedpersons.

* Bychangingtheclampingsleeve,thefittingcanbeusedforbothmetricandinchpipes.

Part numbersTheORFSfittingpartnumberconsistsoftwoparts.

Thefirstfourdigitssignifythetype(comparewiththeflarefittings).

Thefourlastdigitssignifytherecommendedpipesizeininches.1/4"forexample,givespartnumber04.

Fordeviatingconnections,thethreadsizeisgiveninthepartnumber,forexampleG3/8"=06.

Hydroscandreservestherighttomodifyanyorallpartsofthiscataloguewithoutanypriornotice. For more couplings, see chapters 4:2 and 4:4.

Pipe OD Thread Part

mm inch UN number

6 1/4" 9/16"–18UNF 048 5/6" 11/16"–16 0610 3/8" 11/16"–16 0612 1/2" 13/16"–16 0814 1015 1016 5/8" 1"–14UNS 1018 3/4" 13/16"–16 1220 1222 7/8" 17/16"–12 1625 1" 17/16"–12 1628 2030 2032 11/4" 111/16"–12 2035 2438 11/2" 2"–12 24

ORFS COUPLiNGS PAGE

TAbLE OF CONTENTS

7701 StraightfittingORFS–ORFS 2977702 90°ElbowfittingORFS–ORFS 2977703 T-fittingORFS–ORFS–ORFS 2977705 StraightfittingORFS–ORFSbulkhead 2977706 90°ElbowfittingORFS–ORFSbulkhead 2977707 45°ElbowfittingORFS–ORFSbulkhead 2977709 T-fittingORFS–ORFS–ORFSbulkhead 2987710 L-fittingORFS–ORFS–ORFSbulkhead 2987711 StraightfittingORFS–NPTthread 2987713 StraightfittingORFS–Gthread 2987714 StraightfittingORFS–UNFthread 2987715 StraightfittingORFS–Mthread 2997720 90°ElbowfittingNPTthread 2997722 Adjustable90°elbowfittingORFSGthread 2997723 Adjustable90°elbowfittingUNFthread 2997724 Adjustable90°elbowfittingORFSMthread 3007725 LongAdjustable90°elbowfittingORFS–UNF 3007730 45°ElbowfittingORFS–NPTthread 3007732 Adjustable45°elbowfittingORFSGthread 3007733 Adjustable45°elbowfittingORFSUNFthread 3007740 T-FittingORFSNPTthread 3007742 AdjustableT-fittingORFS–ORFS–UNFthread 3017744 AdjustableL-fittingORFS–ORFS–Gthread 3017741 AdjustableT-fittingORFS–ORFS–Gthread 3017745 AdjustableL-fittingORFS–ORFS–UNFthread 3017760 90°ElbowfittingORFS–ORFS 3017761 45°ElbowfittingORFS–ORFS 3017766 AdaptorORFSGthread 3027762 T-FittingORFS–ORFS–ORFS 3027763 L-FittingORFS–ORFS–ORFS 3027767 AdaptorORFS–UNFthread 3027770 ReductionORFS–ORFS 3027781 TestPointORFS–Gthread 3037790 BlindnutORFS 3037791 PlugORFS 3037792 NutORFS 3037793 Clampingsleeve 3035610-07 O-ringforORFS 303

HYDROSCAND ORFS COUPLiNGS PRODUCT GROUP 770


ASSEmbLY iNSTRUCTiONS

–LubricatetheO-ringbeforeassembly.

–Assembleasshowninthepicturetotheleft.

–Tightenthenutbywrenchuntilresistance.

–Tightenthenutaccordingtothetablebelow.

FlangingCutthepipesotheflangeis90°.TheclampingsleeveincombinationwiththenutandO-ringsealtheunit.

brazingAnalternativetocutthepipeistobraze/weldanORFSsleevetothepipe.

Crimpedpipe

Clampingsleeve

Nut O-ring

Straightthread

Adapter/Body

Crimpedpipe

Solderingsleeve

Nut O-ring

Straightthread

Adapter/Body

Tightening torque(30°)

1/2 FFWR

1/4 FFWR)15°

)20°(

(

1/3 FFWR

(45°)

3/4 FFWR

REV. Description Date Approved

MATERIAL:

FINISH:

HEAT TREATMENT:

7714-08-12

ORFS x JIC Adapter

7714

EN-10277-3

COATING acc. to HS-STD 6539Class Fe/Zn 8 P1T

-

M. Karlsson - - 2007-03-02 1:1±±±±

0,15

0,25Designed by:

1/1

Angular

0,1Paralell

Concentricity

Surface

Linear

LIMITS UNLESS STATED OTHERWISE

0,10,5

6,3

0,1

All dimensions apply before plating

Drawing No:

Description:

Scale:

Sheet:

Date:

REV:

Article No./Reference

Filename:Checked by:

Part No. Qty.

Approved by - date:

Description

Linear dimensions

On diameters

Remove all burrs and sharp corners All dimensions in mm

This drawing is the property of HYDROSCAND AB and must not be copied and/or reproduced in whole or in part or transferred to a third party without our written permission. Copyright reserved.

Pipe dim. * ThreadFFWR new

FFWR reassembly

6 9/16"–18UNF 1/2–3/4 1/4–1/28–10 11/16"–16UN 1/2–3/4 1/4–1/212 13/16"–16UN 1/2–3/4 1/4–1/2

14–16 1"–14UNS 1/2–3/4 1/4–1/218–20 1.3/16"–12UN 1/3–1/2 1/4–1/222–25 1.7/16"–12UN 1/3–1/2 1/4–1/228–32 1.11/16"–12UN 1/3–1/2 1/4–1/235–38 2"–12UN 1/3–1/2 1/4–1/2

FFWRFlatsFromWrenchResistance Tightentofullmetalcontact.Alwaysuseanappropriatewrench *Jumpsizemayoccur,thenfollowthethreadsize

PRODUCT GROUP 770 HYDROSCAND ORFS COUPLiNGS


7:7

7701STRAiGHT FiTTiNG

ORFS – ORFS


ORFS – ORFS bULkHEAD

770290° ELbOW FiTTiNG

ORFS – ORFS

7703T-FiTTiNG

ORFS – ORFS – ORFS

Partnumber Thread1 x Thread2 Partnumber Thread1 x Thread2

Partnumber Thread1 Type Thread2

Partnumber Thread1 Thread2 Thread3 Type

7701-04-04 ORFS04 ORFS047701-06-06 ORFS06 ORFS067701-06-08 ORFS06 ORFS087701-08-08 ORFS08 ORFS087701-08-10 ORFS08 ORFS107701-08-12 ORFS08 ORFS127701-10-10 ORFS10 ORFS107701-10-12 ORFS10 ORFS127701-12-12 ORFS12 ORFS127701-12-16 ORFS12 ORFS167701-16-16 ORFS16 ORFS167701-16-20 ORFS16 ORFS207701-20-20 ORFS20 ORFS207701-24-24 ORFS24 ORFS24

7705-04-04 ORFS04 ORFS04Bulkhead7705-06-06 ORFS06 ORFS06Bulkhead7705-08-08 ORFS08 ORFS08Bulkhead7705-10-10 ORFS10 ORFS10Bulkhead7705-12-12 ORFS12 ORFS12Bulkhead7705-16-16 ORFS16 ORFS16Bulkhead7705-20-20 ORFS20 ORFS20Bulkhead7705-24-24 ORFS24 ORFS24Bulkhead

7702-04-04 ORFS04 90° ORFS047702-06-06 ORFS06 90° ORFS067702-08-08 ORFS08 90° ORFS087702-10-10 ORFS10 90° ORFS107702-12-12 ORFS12 90° ORFS127702-16-16 ORFS16 90° ORFS167702-20-20 ORFS20 90° ORFS207702-24-24 ORFS24 90° ORFS24

7703-04-04 ORFS04 ORFS04 ORFS04 T7703-06-06 ORFS06 ORFS06 ORFS06 T7703-08-08 ORFS08 ORFS08 ORFS08 T7703-10-10 ORFS10 ORFS10 ORFS10 T7703-12-12 ORFS12 ORFS12 ORFS12 T7703-16-16 ORFS16 ORFS16 ORFS16 T7703-20-20 ORFS20 ORFS20 ORFS20 T7703-24-24 ORFS24 ORFS24 ORFS24 T




7706-04-04 ORFS04 90° ORFS04Bulkhead7706-06-06 ORFS06 90° ORFS06Bulkhead7706-08-08 ORFS08 90° ORFS08Bulkhead7706-10-10 ORFS10 90° ORFS10Bulkhead7706-12-12 ORFS12 90° ORFS12Bulkhead7706-16-16 ORFS16 90° ORFS16Bulkhead7706-20-20 ORFS20 90° ORFS20Bulkhead7706-24-24 ORFS24 90° ORFS24Bulkhead

770745°ELbOW FiTTiNG



7707-04-04 ORFS04 45° ORFS04Bulkhead7707-06-06 ORFS06 45° ORFS06Bulkhead7707-08-08 ORFS08 45° ORFS08Bulkhead7707-10-10 ORFS10 45° ORFS10Bulkhead7707-12-12 ORFS12 45° ORFS12Bulkhead7707-16-16 ORFS16 45° ORFS16Bulkhead7707-20-20 ORFS20 45° ORFS20Bulkhead7707-24-24 ORFS24 45° ORFS24Bulkhead



7709T-FiTTiNG

ORFS – ORFS – ORFS bULkHEAD

7710L-FiTTiNG

ORFS – ORFS – ORFS bULkHEAD



7709-06-06 ORFS06 ORFS06 ORFS06 TBulkhead7709-08-08 ORFS08 ORFS08 ORFS08 TBulkhead7709-10-10 ORFS10 ORFS10 ORFS10 TBulkhead7709-12-12 ORFS12 ORFS12 ORFS12 TBulkhead

7710-06-06 ORFS06 ORFS06 ORFS06 LBulkhead7710-08-08 ORFS08 ORFS08 ORFS08 LBulkhead7710-10-10 ORFS10 ORFS10 ORFS10 LBulkhead7710-12-12 ORFS12 ORFS12 ORFS12 LBulkhead7710-16-16 ORFS16 ORFS16 ORFS16 LBulkhead


ORFS – NPT THREAD

7713STRAiGHT FiTTiNG ORFS – G THREAD



ORFS – UNF THREAD

With SAE-O connectionPartnumber Thread1 x Thread2

Partnumber Thread1 x Thread2

Partnumber Thread1 x Thread27711-04-02 ORFS04 1/8"-27NPTM7711-04-04 OFRS04 1/4"-18NPTM7711-04-06 ORFS04 3/8"-18NPTM7711-04-08 ORFS04 1/2"-14NPTM7711-06-02 ORFS06 1/8"-27NPTM7711-06-04 ORFS06 1/4"-18NPTM7711-06-06 ORFS06 3/8"-18NPTM7711-06-08 ORFS06 1/2"-14NPTM7711-08-04 ORFS08 1/4"-18NPTM7711-08-06 ORFS08 3/8"-18NPTM7711-08-08 ORFS08 1/2"-14NPTM7711-08-12 ORFS08 3/4"-14NPTM7711-10-08 ORFS10 1/2"-14NPTM7711-10-12 ORFS10 3/4"-14NPTM7711-12-08 ORFS12 1/2"-14NPTM7711-12-12 ORFS12 3/4"-14NPTM7711-12-16 ORFS12 1"-11½NPTM7711-16-12 ORFS16 3/4"-14NPTM7711-16-16 ORFS16 1"-11½NPTM7711-20-16 ORFS20 1"-11½NPTM7711-20-20 ORFS20 11/4"-11½NPTM7711-24-24 ORFS24 11/2"-11½NPTM

7713-04-02 ORFS04 G1/8"M7713-04-04 ORFS04 G1/4"M7713-04-06 ORFS04 G3/8"M7713-04-08 ORFS04 G1/2"M7713-06-04 ORFS06 G1/4"M7713-06-06 ORFS06 G3/8"M7713-06-08 ORFS06 G1/2"M7713-06-12 ORFS06 G3/4"M7713-08-04 ORFS08 G1/4"M7713-08-06 ORFS08 G3/8"M7713-08-08 ORFS08 G1/2"M7713-08-12 ORFS08 G3/4"M7713-10-06 ORFS10 G3/8"M7713-10-08 ORFS10 G1/2"M7713-10-12 ORFS10 G3/4"M7713-12-08 ORFS12 G1/2"M7713-12-12 ORFS12 G3/4"M7713-12-16 ORFS12 G1"M7713-12-20 ORFS12 G11/4"M7713-16-12 ORFS16 G3/4"M7713-16-16 ORFS16 G1"M7713-16-20 ORFS16 G11/4"M7713-20-16 ORFS20 G1"M7713-20-20 ORFS20 G11/4"M7713-20-24 ORFS20 G11/2"M7713-24-24 ORFS24 G11/2"M

7714-04-07 ORFS04 SAEO7/16"M7714-04-09 ORFS04 SAEO9/16"M7714-04-12 ORFS04 SAEO3/4"M7714-06-07 ORFS06 SAEO7/16"M7714-06-09 ORFS06 SAEO9/16"M7714-06-12 ORFS06 SAEO3/4"M7714-06-14 OFRS06 SAEO7/8"M7714-08-09 ORFS08 SAEO9/16"M7714-08-12 ORFS08 SAEO3/4"M7714-08-14 ORFS08 SAEO7/8"M7714-08-17 OFRS08 SAEO11/16"M7714-10-12 ORFS10 SAEO3/4"M7714-10-14 ORFS10 SAEO7/8"M7714-12-12 ORFS12 SAEO3/4"M7714-12-14 ORFS12 SAEO7/8"M7714-12-17 ORFS12 SAEO11/16"M7714-12-21 ORFS12 SAEO15/16"M7714-16-17 ORFS16 SAEO11/16"M7714-16-21 ORFS16 SAEO15/16"M7714-16-26 OFRS16 SAEO15/8"M7714-20-21 OFRS20 SAEO15/16"M7714-20-26 ORFS20 SAEO15/8"M7714-20-30 OFRS20 SAEO17/8"M7714-24-30 ORFS24 SAEO17/8"M



7:7

7715STRAiGHT FiTTiNG ORFS – m THREAD



NPT THREAD



7715-04-10 ORFS04 M10x1.07715-04-12 ORFS04 M12x1.57715-04-14 ORFS04 M14x1.57715-04-16 ORFS04 M16x1.57715-06-14 ORFS06 M14x1.57715-06-16 ORFS06 M16x1.57715-08-14 ORFS08 M14x1.57715-08-16 ORFS08 M16x1.57715-08-18 ORFS08 M18x1.57715-10-14 ORFS10 M14x1.57715-10-18 ORFS10 M18x1.57715-10-22 ORFS10 M22x1.57715-12-33 ORFS12 M33x2.07715-16-27 ORFS16 M27x2.0

7720-04-02 ORFS04 NPT1/8"-27NPTM7720-04-04 ORFS04 NPT1/4"-18NPTM7720-06-02 ORFS06 NPT1/8"-27NPTM7720-06-04 ORFS06 NPT1/4"-18NPTM7720-06-06 ORFS06 NPT3/8"-18NPTM7720-06-08 ORFS06 NPT1/2"-14NPTM7720-08-06 ORFS08 NPT3/8"-18NPTM7720-08-08 ORFS08 NPT1/2"-14NPTM7720-08-12 ORFS08 NPT3/4"-14NPTM7720-10-08 ORFS10 NPT1/2"-14NPTM7720-12-12 ORFS12 NPT3/4"-14NPTM7720-12-16 ORFS12 NPT1"-11½NPTM7720-16-16 ORFS16 NPT1"-11½NPTM7720-20-20 ORFS20 NPT11/4"-11½NPTM

7722ADjUSTAbLE 90° ELbOW FiTTiNG

ORFS G THREAD


7723ADjUSTAbLE 90° ELbOW FiTTiNG

UNF THREAD

With SAE-O connection



7722-04-02 ORFS04 90° G1/8"7722-04-04 ORFS04 90° G1/4"7722-04-06 ORFS04 90° G3/8"7722-06-04 ORFS06 90° G1/4"7722-06-06 ORFS06 90° G3/8"7722-06-08 ORFS06 90° G1/2"7722-08-06 OFRS08 90° G3/8"7722-08-08 ORFS08 90° G1/2"7722-08-12 ORFS08 90° G3/4"7722-10-06 ORFS10 90° G3/8"7722-10-08 ORFS10 90° G1/2"7722-10-12 ORFS10 90° G3/4"7722-12-08 ORFS12 90° G1/2"7722-12-12 ORFS12 90° G3/4"7722-12-16 ORFS12 90° G1"7722-16-12 ORFS16 90° G3/4"7722-16-16 ORFS16 90° G1"7722-20-16 ORFS20 90° G1"7722-20-20 ORFS20 90° G11/4"7722-24-24 ORFS24 90° G11/2"

7723-04-07 ORFS04 90° SAEO7/16"7723-04-09 ORFS04 90° SAEO9/16"7723-04-12 ORFS04 90° SAEO3/4"7723-06-07 ORFS06 90° SAEO7/16"7723-06-09 ORFS06 90° SAEO9/16"7723-06-12 ORFS06 90° SAEO3/4"7723-06-14 ORFS06 90° SAEO7/8"7723-08-09 ORFS08 90° SAEO9/16"7723-08-12 ORFS08 90° SAEO3/4"7723-08-14 ORFS08 90° SAEO7/8"7723-10-12 ORFS10 90° SAEO3/4"7723-10-14 ORFS10 90° SAEO7/8"7723-10-17 ORFS10 90° SAEO11/16"7723-12-14 ORFS12 90° SAEO7/8"7723-12-17 ORFS12 90° SAEO11/16"7723-12-21 ORFS12 90° SAEO15/16"7723-16-17 ORFS16 90° SAEO11/16"7723-16-21 ORFS16 90° SAEO15/16"7723-20-21 ORFS20 90° SAEO15/16"7723-20-26 ORFS20 90° SAEO15/8"



7724ADjUSTAbLE 90° ELbOW FiTTiNG ORFS m THREAD


7732ADjUSTAbLE 45° ELbOW FiTTiNG ORFS G THREAD


7733ADjUSTAbLE 45° ELbOW

FiTTiNG ORFS UNF THREAD


7725LONG ADjUSTAbLE 90° ELbOW

FiTTiNG ORFS – UNF THREAD


773045° ELbOW FiTTiNG ORFS – NPT THREAD


Partnumber Thread1 Type Thread2 Partnumber Thread1 Type Thread2




7724-04-14 ORFS04 90° M14x1.57724-06-16 ORFS06 90° M16x1.57724-08-18 ORFS08 90° M18x1.57724-10-18 ORFS10 90° M18x1.57724-10-22 ORFS10 90° M22x1.57724-12-27 ORFS12 90° M27x2.0

7732-04-02 ORFS04 45° G1/8"7732-04-04 ORFS04 45° G1/4"7732-06-04 ORFS06 45° G1/4"7732-06-06 ORFS06 45° G3/8"7732-06-08 ORFS06 45° G1/2"7732-08-06 ORFS08 45° G3/8"7732-08-08 ORFS08 45° G1/2"7732-08-12 ORFS08 45° G3/4"7732-10-08 ORFS10 45° G1/2"7732-12-08 ORFS12 45° G1/2"7732-12-12 ORFS12 45° G3/4"7732-16-16 ORFS16 45° G1"7732-16-20 ORFS16 45° G11/4"7732-20-20 ORFS20 45° G11/4"7732-24-24 ORFS24 45° G11/2"

7733-04-07 ORFS04 45° SAEO7/16"7733-04-09 ORFS04 45° SAEO9/16"7733-04-12 ORFS04 45° SAEO3/4"7733-06-09 ORFS06 45° SAEO9/16"7733-06-12 ORFS06 45° SAEO3/4"7733-08-09 ORFS08 45° SAEO9/16"7733-08-12 ORFS08 45° SAEO3/4"7733-08-14 ORFS08 45° SAEO7/8"7733-10-12 ORFS10 45° SAEO3/4"7733-10-14 ORFS10 45° SAEO7/8"7733-10-17 ORFS10 45° SAEO11/16"7733-12-14 ORFS12 45° SAEO7/8"7733-12-17 ORFS12 45° SAEO11/16"7733-16-21 ORFS16 45° SAEO15/16"7733-20-26 ORFS20 45° SAEO15/8"

7725-04-07 ORFS04 90°Long 7/16"-20UNF7725-06-09 ORFS06 90°Long 9/16"-18UNF7725-08-12 ORFS08 90°Long 3/4"-16UNF7725-12-17 ORFS12 90°Long11/16"-12UNF7725-16-21 ORFS16 90°Long 15/16"-18UNF7725-20-26 ORFS20 90°Long 15/8"-12UNF

7730-04-02 ORFS04 45° 1/8"-27NPTM7730-04-04 ORFS04 45° 1/4"-18NPTM7730-06-04 ORFS06 45° 1/4"-18NPTM7730-06-06 ORFS06 45° 3/8"-18NPTM7730-06-08 ORFS06 45° 1/2"-14NPTM7730-10-08 ORFS10 45° 1/2"-14NPTM7730-12-12 ORFS12 45° 3/4"-14NPTM7730-24-24 ORFS24 45° 11/2"-11½NPTM

7740T-FiTTiNG

ORFS NPT THREAD


7740-04-02 ORFS04 ORFS04 1/8"-27NPTM T7740-04-04 ORFS04 ORFS04 1/4"-18NPTM T7740-06-04 ORFS06 ORFS06 1/4"-18NPTM T7740-08-06 ORFS08 ORFS08 3/8"-18NPTM T7740-12-12 ORFS12 ORFS12 3/4"-14NPTM T7740-16-16 ORFS16 ORFS16 1"-111/2NPTM T



7:7

7741ADjUSTAbLE T-FiTTiNG

ORFS – ORFS – G THREAD


7742ADjUSTAbLE T-FiTTiNG

ORFS – ORFS – UNF THREAD


7744ADjUSTAbLE L-FiTTiNG

ORFS – ORFS – G THREAD


7745ADjUSTAbLE L-FiTTiNG

ORFS – ORFS – UNF THREAD


Partnumber Thread1 Thread2 Thread3




7741-04-04 ORFS04 ORFS04 G1/4"7741-06-04 ORFS06 ORFS06 G1/4"7741-06-06 ORFS06 ORFS06 G3/8"7741-08-08 ORFS08 ORFS08 G1/2"7741-10-12 ORFS10 ORFS10 G3/4"7741-12-12 ORFS12 ORFS12 G3/4"7741-16-16 ORFS16 ORFS16 G1"

7742-04-07 ORFS04 ORFS04 SAEO7/16"7742-06-09 ORFS06 ORFS06 SAEO9/16"7742-06-12 ORFS06 ORFS06 SAEO3/4"7742-08-12 ORFS08 ORFS08 SAEO3/4"7742-10-14 ORFS10 ORFS10 SAEO7/8"7742-12-17 ORFS12 ORFS12 SAEO11/16"7742-16-21 ORFS16 ORFS16 SAEO15/16"

7744-04-04 ORFS04 ORFS04 G1/4"7744-08-06 ORFS08 ORFS06 G3/8"7744-08-08 ORFS08 ORFS08 G1/2"7744-10-08 ORFS10 ORFS10 G1/2"7744-12-12 ORFS12 ORFS12 G3/4"7744-16-16 ORFS16 ORFS16 G1"

7745-04-07 ORFS04 ORFS04 SAEO7/16"7745-04-09 ORFS04 ORFS04 SAEO9/16"7745-06-09 ORFS06 ORFS06 SAEO9/16"7745-08-12 ORFS08 ORFS08 SAEO3/4"7745-08-17 ORFS08 ORFS08 SAEO11/16"7745-10-17 ORFS10 ORFS10 SAEO11/16"7745-12-12 ORFS12 ORFS12 SAEO3/4"7745-12-17 ORFS12 ORFS12 SAEO11/16"7745-16-21 ORFS16 ORFS16 SAEO15/16"


ORFS – ORFS

Swivel nut


ORFS – ORFS

Swivel nut



7760-04-04 ORFS04 90° ORFS04FS7760-06-06 ORFS06 90° ORFS06FS7760-08-08 ORFS08 90° ORFS08FS7760-10-10 ORFS10 90° ORFS10FS7760-12-12 ORFS12 90° ORFS12FS7760-16-16 ORFS16 90° ORFS16FS7760-20-20 ORFS20 90° ORFS20FS7760-24-24 ORFS24 90° ORFS24FS

7761-04-04 ORFS04 45° ORFS04FS7761-06-06 ORFS06 45° ORFS06FS7761-08-08 ORFS08 45° ORFS08FS7761-10-10 ORFS10 45° ORFS10FS7761-12-12 ORFS12 45° ORFS12FS7761-16-16 ORFS16 45° ORFS16FS7761-24-24 ORFS24 45° ORFS24FS



7762T-FiTTiNG


Swivel nut

7763L-FiTTiNG


Swivel nut



7762-04-04 ORFS04 ORFS04 ORFS04FS T7762-06-06 ORFS06 ORFS06 ORFS06FS T7762-08-08 ORFS08 ORFS08 ORFS08FS T7762-10-10 ORFS10 ORFS10 ORFS10FS T7762-12-12 ORFS12 ORFS12 ORFS12FS T7762-16-16 ORFS16 ORFS16 ORFS16FS T7762-20-20 ORFS20 ORFS20 ORFS20FS T7762-24-24 ORFS24 ORFS24 ORFS24FS T

7763-04-04 ORFS04 ORFS04FS ORFS04 L7763-06-06 ORFS06 ORFS06FS ORFS06 L7763-08-08 ORFS08 ORFS08FS ORFS08 L7763-10-10 ORFS10 ORFS10FS ORFS10 L7763-12-12 ORFS12 ORFS12FS ORFS12 L7763-16-16 ORFS16 ORFS16FS ORFS16 L7763-20-20 ORFS20 ORFS20FS ORFS20 L7763-24-24 ORFS24 ORFS24FS ORFS24 L

7766ADAPTOR

ORFS G THREAD


7767ADAPTOR

ORFS – UNF THREAD

Swivel nut. With SAE-O connection



7766-04-04 ORFS04FS G1/4"M7766-04-06 ORFS04FS G3/8"M7766-06-04 ORFS06FS G1/4"M7766-06-06 ORFS06FS G3/8"M7766-08-06 ORFS08FS G3/8"M7766-08-08 ORFS08FS G1/2"M7766-10-08 ORFS10FS G1/2"M7766-12-12 ORFS12FS G3/4"M7766-16-16 ORFS16FS G1"M7766-20-20 ORFS20FS G11/4"M7766-24-24 ORFS24FS G11/2"M

7767-04-09 ORFS04FS SAEO9/16"7767-06-09 ORFS06FS SAEO9/16"7767-08-12 ORFS08FS SAEO3/4"7767-12-17 ORFS12FS SAEO11/16"

7770REDUCTiON

ORFS – ORFS


7770-06-04 ORFS06 Reduction ORFS047770-08-04 ORFS08 Reduction ORFS047770-08-06 ORFS08 Reduction ORFS067770-10-06 ORFS10 Reduction ORFS067770-10-08 ORFS10 Reduction ORFS087770-12-04 ORFS12 Reduction ORFS047770-12-06 ORFS12 Reduction ORFS067770-12-08 ORFS12 Reduction ORFS087770-12-10 ORFS12 Reduction ORFS107770-16-04 ORFS16 Reduction ORFS047770-16-06 ORFS16 Reduction ORFS067770-16-08 ORFS16 Reduction ORFS087770-16-10 ORFS16 Reduction ORFS107770-16-12 ORFS16 Reduction ORFS127770-20-12 ORFS20 Reduction ORFS127770-20-16 ORFS20 Reduction ORFS167770-24-20 ORFS24 Reduction ORFS20



7:7

7781TEST POiNT

ORFS – G THREAD

7792NUT

ORFS

7793CLAmPiNG SLEEvE

7790bLiND NUT

ORFS

7791PLUG ORFS

5610-07O-RiNG FOR ORFS

Partnumber Thread1 Type Thread2 Partnumber Thread1 Pipedim.(mm)

Partnumber Description Pipedim.Partnumber Description Thread

Partnumber Description Thread Partnumber Description

7781-04-04 ORFS04 TestPoint G1/4"F7781-06-04 ORFS06 TestPoint G1/4"F7781-08-04 ORFS08 TestPoint G1/4"F

7792-00-04 ORFS04 67792-00-06 ORFS06 8|107792-00-08 ORFS08 127792-00-10 ORFS10 14|15|167792-00-12 ORFS12 18|207792-00-16 ORFS16 22|257792-00-20 ORFS20 28|30|327792-00-24 ORFS24 35|38

7793-00-06 Clampingsleeve 6mm7793-00-08 Clampingsleeve 8mm7793-00-10 Clampingsleeve 10mm7793-00-12 Clampingsleeve 12mm7793-00-14 Clampingsleeve 14mm7793-00-15 Clampingsleeve 15mm7793-00-16 Clampingsleeve 16mm7793-00-18 Clampingsleeve 18mm7793-00-20 Clampingsleeve 20mm7793-00-22 Clampingsleeve 22mm7793-00-25 Clampingsleeve 25mm7793-00-28 Clampingsleeve 28mm7793-00-30 Clampingsleeve 30mm7793-00-32 Clampingsleeve 32mm7793-00-35 Clampingsleeve 35mm7793-00-38 Clampingsleeve 38mm

7790-00-04 Blindnut ORFS047790-00-06 Blindnut ORFS067790-00-08 Blindnut ORFS087790-00-10 Blindnut ORFS107790-00-12 Blindnut ORFS127790-00-16 Blindnut ORFS167790-00-20 Blindnut ORFS207790-00-24 Blindnut ORFS24

7791-00-04 Plug ORFS047791-00-06 Plug ORFS067791-00-08 Plug ORFS087791-00-10 Plug ORFS107791-00-12 Plug ORFS127791-00-16 Plug ORFS167791-00-20 Plug ORFS207791-00-24 Plug ORFS24

5610-07-04 O-ringforORFS04 7.65x1.785610-07-06 O-ringforORFS06 9.25x1.785610-07-08 O-ringforORFS08 12.42x1.785610-07-10 O-ringforORFS10 15.60x1.785610-07-12 O-ringforORFS12 18.77x1.785610-07-16 O-ringforORFS16 23.52x1.785610-07-20 O-ringforORFS20 29.87x1.785610-07-24 O-ringforORFS24 37.82x1.78


8

HYDROSCAND VALVES/FiLTERS/TEST POiNTS

VALVES/FiLTERS/TEST POiNTS

PRODUCT GROUP 800

BALL VALVES

The ball valves are mainly used as shut-down valves and distribution valves. Valves are a simple and safe solution for cut-off. The advantages of the ball valves are low flow resistance, high density and easy main-tenance. Hydroscand can offer customer adapted ball valves in all functions and materials.

Ball seal made of POM (thermoplastic), stem and adapter sealing made of NBR. Other materials on request.

NOTE! The Types 8011, 8041 and 8042 can only be pressurised on inlet port 1, otherwise there will be in-ner leakage.

LEVEL MEASUREMENTSLevel instruments, with or without thermometer, are delivered complete with drilled screws, oil resistant seal, and frame.

The standard area of measure is 0 – 100°C.

FiLTERSSpin-on filters for suction and return lines – 10 micron. Suction strainers – 125 micron. Return oil filters for tank assembling. Complete filler gap with air filters and screws. Air filters – 40 micron.

TEST POiNTS

Test points with connection M 16 x 2 are available with the most common connection threads towards the port. Manometer connections and joints are included in Hydroscand's product selection.


VALVES PAGE

VALVES LOw PRESSURE PAGE

FiLTERS PAGE

TEST POiNTS & ACCESSORiES PAGE

TABLE OF CONTENTS

8001 2-way ball valve, G-threaded, female, Black 3068003 2-way ball valve, SKL-connection, Black 3068004 2-way ball valve, SKS-connection, Black 3068031 2-way ball valve, G-threaded, female 3068032 2-way ball valve, SKL-connection 3068034 2-way ball valve, SKS-connection 3068011 3-way reversing valve, L-drilled, G-threaded 3078042 3-way reversing valve, T-drilled, G-threaded 3078044-01 3-way ball valve, L-drilled, G-threaded, female 3078041 3-way reversing valve, L-drilled, G-threaded 3078044-02 3-way ball valve, T-drilled, G-threaded, female 3078031-8 Handle 3088031-89 Locking device 3088072 Check/non-return valve, G-threaded, female 3098072-94 Panel mounting nut 309

8090 2-way ball valve, low pressure 3088090 2-way ball valve, low pressure, short thread 3088091 3-way ball valve, low pressure, L-drilled 3088094 2-way Mini valve, low pressure 3088070 Check valve, G-threaded, female 309

8100 Level Regulator 3108104 Filler cap 3108101 Spin-on filter 3108201 Spin-on filter element for 8101 3108109 Air filter 3108102 Suction strainers 3108103 Return filter 3108203 Filter element 310

8301 Test points M 16 x 2 G-threaded 3118303 Test points M 16 x 2 DKLO connection 3118304 Test points M 16 x 2 DKSO connection 3118306 Manometer fitting 3118307 Manometer fitting 3118308 Measurement hose M 16 x 2 – G 1/4" 3118315 Joint 3118309 Measurement hose M 16 x 2 – 2 3118360 Accessories for manometer 3128360 Manometer Ø63 mm 3128360 Digital manometer Ø63 mm 3128360 Manometer Ø63 mm 3128360 Manometer Ø100 mm 3128372 Test equipment with 2 manometers 312

HYDROSCAND VALVES/FiLTERS/TEST POiNTS PRODUCT GROUP 800


80012-wAY BALL VALVE,

G-THREADED, FEMALE, BLACk

80312-wAY BALL VALVE, G-THREADED,

FEMALE, YELLOw CHROMATED


SkL-CONNECTiON, YELLOw CHROMATED


SkS-CONNECTiON, YELLOw CHROMATED


SkL-CONNECTiON, BLACk


SkS-CONNECTiON, BLACk

Part number Connection DN Work pr. Part number Connection DN Work pr.

Part number Connection Thread DN Work pr.


8001-02-02 G 1/8" F 4 50.0 MPa8001-04-04 G 1/4" F 6 50.0 MPa8001-06-06 G 3/8" F 10 50.0 MPa8001-08-08 G 1/2" F 12 50.0 MPa8001-12-12 G 3/4" F 20 40.0 MPa 8001-16-16 G 1" F 25 40.0 MPa8001-20-20 G 1 1/4" F@ 32 40.0 MPa8001-24-24 G 1 1/2" F@ 40 40.0 MPa8001-32-32 G 2" F@ 50 31.5 MPa

@ = Cast housing

8031-04-04 G 1/4" F 6 50.0 MPa8031-06-06 G 3/8" F 10 50.0 MPa8031-08-08 G 1/2" F 12 50.0 MPa8031-12-12 G 3/4" F 20 40.0 MPa8031-16-16 G 1" F 25 40.0 MPa8031-20-20 G 1 1/4" F @ 32 40.0 MPa8031-24-24 G 1 A1/2" F@ 40 40.0 MPa8031-32-32 G 2" F@ 50 40.0 MPa

@ = Cast housing

8003-08-14 SKL 8 M 14 x 1.5 6 50.0 MPa8003-10-16 SKL 10 M 16 x 1.5 8 50.0 MPa8003-12-18 SKL 12 M 18 x 1.5 10 50.0 MPa8003-15-22 SKL 15 M 22 x 1.5 12 50.0 MPa8003-18-26 SKL 18 M 26 x 1.5 16 40.0 MPa8003-22-30 SKL 22 M 30 x 2.0 20 40.0 MPa8003-28-36 SKL 28 M 36 x 2.0 25 40.0 MPa8003-35-45 SKL 35 M 45 x 2.0 32 40.0 MPa8003-42-52 SKL 42@ M 52 x 2.0 40 40.0 MPa

@ = Cast housing



8032-06-12 SKL 6 M 12 x 1.5 4 50.0 MPa8032-08-14 SKL 8 M 14 x 1.5 6 50.0 MPa8032-10-16 SKL 10 M 16 x 1.5 8 50.0 MPa8032-12-18 SKL 12 M 18 x 1.5 10 50.0 MPa8032-15-22 SKL 15 M 22 x 1.5 12 50.0 MPa8032-18-26 SKL 18 M 26 x 1.5 16 40.0 MPa8032-22-30 SKL 22 M 30 x 2.0 20 40.0 MPa8032-28-36 SKL 28 M 36 x 2.0 25 40.0 MPa8032-35-45 SKL 35 M 45 x 2.0 32 40.0 MPa8032-42-52 SKL 42@ M 52 x 2.0 40 40.0 MPa

@ = Cast housing

8034-08-16 SKS8 M16x1.5 4 50.0 MPa8034-10-18 SKS10 M18x1.5 6 50.0 MPa8034-12-20 SKS12 M20x1.5 8 50.0 MPa8034-16-24 SKS16 M24x1.5 12 50.0 MPa8034-20-30 SKS20 M30x2.0 16 40.0 MPa8034-25-36 SKS25 M36x2.0 20 40.0 MPa8034-30-42 SKS30 M42x2.0 25 40.0 MPa8034-38-52 SKS38@ M52x2.0 32 40.0 MPa

NB! The pressure is only related to the valves. Compare with the pressure class for the connection.

@ = Cast housing

8004-08-16 SKS 8 M 16 x 1.5 4 50.0 MPa8004-10-18 SKS 10 M 18 x 1.5 6 50.0 MPa8004-12-20 SKS 12 M 20 x 1.5 8 50.0 MPa8004-14-22 SKS 14 M 22 x 1.5 10 50.0 MPa8004-16-24 SKS 16 M 24 x 1.5 12 50.0 MPa8004-20-30 SKS 20 M 30 x 2.0 16 40.0 MPa8004-25-36 SKS 25 M 36 x 2.0 20 40.0 MPa8004-30-42 SKS 30 M 42 x 2.0 25 40.0 MPa8004-38-52 SKS 38@ M 5 2x 2.0 32 40.0 MPa

@ = Cast housing


PRODUCT GROUP 801

PRODUCT GROUP 801

PRODUCT GROUP 801

PRODUCT GROUP 801

PRODUCT GROUP 800 HYDROSCAND VALVES/FiLTERS/TEST POiNTS


8

80113-wAY REVERSiNG VALVE, L-DRiLLED, G-THREADED,

FEMALE, BLACk

80413-wAY REVERSiNG VALVE, L-DRiLLED, G-THREADED,


80423-wAY REVERSiNG VALVE, T-DRiLLED, G-THREADED,


8044-013-wAY BALL VALVE,

L-DRiLLED, G-THREADED, FEMALE

Part number Connection DN Drill Work pr.


Part number Connection Drill Work pr.

8011-04-04 G 1/4" F 6 F L-Drilled 50.0 MPa8011-06-06 G 3/8" F 10 F L-Drilled 50.0 MPa8011-08-08 G 1/2" F 12 F L-Drilled 50.0 MPa8011-12-12 G 3/4" F 20 F L-Drilled 40.0 MPa8011-16-16 G 1" F 25 F L-Drilled 40.0 MPa


8041-02-02 G 1/8" F 4 L-Drilled 50.0 MPa8041-04-04 G 1/4" F 6 L-Drilled 50.0 MPa8041-06-06 G 3/8" F 10 L-Drilled 50.0 MPa8041-08-08 G 1/2" F 12 L-Drilled 50.0 MPa8041-12-12 G 3/4" F 20 L-Drilled 40.0 MPa8041-16-16 G 1" F 25 L-Drilled 40.0 MPa8041-20-20 G 1 1/4" F 25 L-Drilled 40.0 MPa8041-24-24 G 1 1/2" F 25 L-Drilled 40.0MPa

8042-04-04 G 1/4" F 6 T-Drilled 50.0 MPa8042-06-06 G 3/8" F 10 T-Drilled 50.0 MPa8042-08-08 G 1/2" F 12 T-Drilled 50.0 MPa8042-12-12 G 3/4" F 20 T-Drilled 40.0 MPa8042-16-16 G 1" F 25 T-Drilled 40.0 MPa

8044-01-02 G 1/8" F L-Drilled 50.0 MPa8044-01-04 G 1/4" F L-Drilled 50.0 MPa8044-01-06 G 3/8" F L-Drilled 50.0 MPa8044-01-08 G 1/2" F L-Drilled 50.0 MPa8044-01-12 G 3/4" F L-Drilled 31.5 MPa8044-01-16 G 1" F L-Drilled 31.5 MPa8044-01-20 G 1 1/4" F L-Drilled 31.5 MPa8044-01-24 G 1 1/2" F L-Drilled 10.0 MPa


PRODUCT GROUP 801

PRODUCT GROUP 801

PRODUCT GROUP 801

8044-023-wAY BALL VALVE,

T-DRiLLED, G-THREADED, FEMALE

Part number Connection Drill Work pr.

8044-02-02 G 1/8" F T-Drilled 50.0 MPa8044-02-04 G 1/4" F T-Drilled 50.0 MPa8044-02-06 G 3/8" F T-Drilled 50.0 MPa8044-02-08 G 1/2" F T-Drilled 50.0 MPa8044-02-12 G 3/4" F T-Drilled 31.5 MPa8044-02-16 G 1" F T-Drilled 31.5 MPa8044-02-20 G 1 1/4" F T-Drilled 31.5 MPa8044-02-24 G 1 1/2" F T-Drilled 10.0 MPa

NB! The pressure is only related to the valves. Compare with the pressure class for the connection.



PRODUCT GROUP 801

PRODUCT GROUP 801

PRODUCT GROUP 802

8031-8HANDLE

For ball valves

8031-89LOCkiNG DEViCE

For 2- and 3-way valves


LOw PRESSURETeflon, brass housing

Part number Connection Material

Part number Suits size DN

Part number Type Connection Work pr.

8031-80-xx Bended Zn8031-81-xx Straight Al8031-83-xx Straight Steel8031-85-xx Bended Alxx = Hole dimension mm (07|08|10|11|12|14|17|19|22)

8031-89-04 4 / 68031-89-06 8 / 108031-89-08 128031-89-10 168031-89-12 20 / 258031-89-20 32 / 40 / 50

8090-04-04 Ball valve G 1/4" F 6.5 MPa8090-06-06 Ball valve G 3/8" F 6.5 MPa8090-08-08 Ball valve G 1/2" F 6.5 MPa8090-12-12 Ball valve G 3/4" F 4.0 MPa8090-16-16 Ball valve G 1" F 4.0 MPa8090-20-20 Ball valve G 1 1/4" F 4.0 MPa8090-24-24 Ball valve G 1 1/2" F 4.0 MPa8090-32-32 Ball valve G 2" F 4.0 MPa8090-40-40 Ball valve G 2 1/2" F 3.0 MPa8090-48-48 Ball valve G 3" F 3.0 MPa8090-64-64 Ball valve G 4" F 3.0 MPa

PRODUCT GROUP 802


LOw PRESSURE, SHORT THREADTeflon, brass housing


8090-03-04 Ball valve G 1/4" F 4.0 MPa8090-05-06 Ball valve G 3/8" F 3.0 MPa8090-07-08 Ball valve G 1/2" F 3.0 MPa8090-11-12 Ball valve G 3/4" F 3.0 MPa8090-15-16 Ball valve G 1" F 3.0 MPa8090-19-20 Ball valve G 1 1/4" F 3.0 MPa8090-23-24 Ball valve G 1/1/2" F 3.0 MPa8090-31-32 Ball valve G 2" F 3.0 MPa8090-39-40 Ball valve G 2 1/2" F 3.0 MPa8090-47-48 Ball valve G 3" F 3.0 MPa8090-63-64 Ball valve G 4" F 3.0 MPa

PRODUCT GROUP 802


LOw PRESSURE, L-DRiLLEDTeflon, brass housing


8091-04-04 L-drilled G 1/4" F 2.5 MPa8091-06-06 L-drilled G 3/8" F 2.5 MPa8091-08-08 L-drilled G 1/2" F 2.5 MPa8091-12-12 L-drilled G 3/4" F 2.5 MPa8091-16-16 L-drilled G 1" F 2.5 MPa8091-20-20 L-drilled G 1 1/4" F 2.5 MPa8091-24-24 L-drilled G 1 1/2" F 2.5 MPa8091-32-32 L-drilled G 2" F 2.5 MPa

PRODUCT GROUP 802

80942-wAY MiNi VALVE,

LOw PRESSURETeflon, brass housing


8094-04-04 Mini valve G 1/4" F 3.0 MPa8094-06-06 Mini valve G 3/8" F 3.0 MPa8094-08-08 Mini valve G 1/2" F 3.0 MPa8094-12-12 Mini valve G 3/4" F 3.0 MPa8094-16-16 Mini valve G 1" F 3.0 MPa



8

8070CHECk VALVE,

G-THREADED, FEMALE

Part number Connection DN Work pr.

8070-02-02 G 1/8" F 6 35.0 MPa8070-04-04 G /4" F 8 35.0 MPa8070-06-06 G 3/8" F 10 35.0 MPa8070-08-08 G /2" F 12 35.0 MPa8070-12-12 G 3/4" F 16 35.0 MPa

PRODUCT GROUP 801

8072CHECk/NON-RETURN VALVE,

G-THREADED, FEMALEOpening pressure 0.5 Bar

Part number Connection DN Work pr.

8072-02-02 G 1/8" F 6 35.0 MPa8072-04-04 G 1/4" F 8 35.0 MPa8072-06-06 G 3/8" F 10 35.0 MPa8072-08-08 G 1/2" F 12 35.0 MPa8072-12-12 G 3/4" F 16 35.0 MPa

PRODUCT GROUP 801

8072-94PANEL MOUNTiNG NUT

For 8070/8072

Part number Type To DN

8072-94-06 Panel mounting nut 8070 / 8072 68072-94-10 Panel mounting nut 8070 8-108072-94-16 Panel mounting nut 8070 12-168072-94-30 Panel mounting nut 8070 20-30

PRODUCT GROUP 801



PRODUCT GROUP 803

PRODUCT GROUP 803

PRODUCT GROUP 803

PRODUCT GROUP 803

PRODUCT GROUP 803

PRODUCT GROUP 803

PRODUCT GROUP 803

8100LEVEL REGULATOR

With thermometer

8104FiLLER CAP

8101SPiN-ON FiLTER

8109AiR FiLTER

8102SUCTiON STRAiNERS

8103RETURN FiLTER

8201SPiN-ON FiLTER ELEMENT FOR

8101

Part number c/c Fixing screw

Part number Hole Screw Ø H Filter

Part number Connection Q max Filtering

Part number Thread Ø Filter

Part number Thread Ø Filter

Part number Thread Recommended Ø Filtering

Part number Description Fits

8100-00-01 76 2 x M 108100-00-02 76 thermometer 2 x M 108100-00-03 127 2 x M 128100-00-04 127 thermometer 2 x M 128100-00-05 127 + 127 3 x M 128100-00-06 127 + 127 thermometer 3 x M 12

8104-00-01 Ø 30 Ø 41 3 x M5 46 111 10 micron8104-00-02 Ø 51 Ø 73 6 x M5 80 134 10 micron8104-00-03 Ø 51 Ø 73 6 x M5 80 204 10 micron

8101-11-02 G 3/4" 55 l/min 10 micron nom.8101-11-12 1) G 3/4" 55 l/min 10 micron nom.8101-21-02 G 1 1/4" 145 l/min 10 micron nom.8101-21-12 1) G 1 1/4" 145 l/min 10 micron nom.

1) Manometer included, 8101-92-02

8109-00-04 G 1/4" 53 3 micron8109-00-06 G 3/8" 53 3 micron8109-00-08 G 1/2" 75 3 micron8109-00-12 G 3/4" 75 3 micron8109-00-16 G 1" 115 3 micron

8102-00-15 G 1/2" 52 788102-00-17 G 1" 70 958102-00-75 G 1 1/2" 130 262

8103-03-20 G 1/2" 25 l/m 10 micron nom.8103-06-20 G 3/4" 40 l/m 10 micron nom.8103-10-20 G 1" 55 l/m 10 micron nom.8103-18-20 G 1 1/4" 125 l/m 10 micron nom.

8201-00-01 10 micron nominal 8101-11-xx8201-00-03 10 micron nominal 8101-21-xx8201-02-01 25 micron nominal 8101-11-xx8201-02-03 25 micron nominal 8101-21-xx

c/c

H

Ø

Ø

Thread

Ø

Thread

Length

8203FiLTER ELEMENT

For return filters 8103

Part number Diam. Length Filtering

8203-03-20 50 mm 73.5 mm 10 micron nom.8203-06-20 70 mm 91.0 mm 10 micron nom.8203-10-20 70 mm 136.0 mm 10 micron nom.8203-18-20 99 mm 216.0 mm 10 micron nom.



8

PRODUCT GROUP 804

PRODUCT GROUP 804

PRODUCT GROUP 804

PRODUCT GROUP 804

PRODUCT GROUP 804

PRODUCT GROUP 804

PRODUCT GROUP 804

PRODUCT GROUP 804

8301TEST POiNTS M 16 x 2

G-THREADED

8306MANOMETER FiTTiNG

Bulkhead, G-thread M16x2, male

8307MANOMETER FiTTiNG

G-thread M16x2, female

8308MEASUREMENT HOSE

M 16 x 2 – G 1/4"Manometer connection WP 63.0 MPa

8309MEASUREMENT HOSE

M 16 x 2 – 2WP 63.0 MPa

8315JOiNT

M 16 x 2 – M 16 x 2


DkLO CONNECTiON, DiN 2353


DkSO CONNECTiON, DiN 2353

Part number Type Connection



Part number Type Length

Part number Type Length

Part number Type

Part number Type Connection Pipe Ø

Part number Type Connection Pipe Ø

8301-00-02 Test nipple M16 x 2 G 1/8" M8301-00-04 Test nipple M16 x 2 G 1/4" M8301-00-06 Test nipple M16 x 2 G 3/8" M8301-00-08 Test nipple M16 x 2 G 1/2" M

8306-00-04 Manometer fitting, bulkhead G 1/4" M8306-00-08 Manometer fitting, bulkhead G 1/2" M

8307-00-04 Manometer fitting G 1/4" F8307-00-08 Manometer fitting G 1/2" F

8308-02-00 Measurement hose 200 mm8308-04-00 Measurement hose 400 mm8308-06-00 Measurement hose 600 mm8308-08-00 Measurement hose 800 mm8308-10-00 Measurement hose 1,000 mm8308-15-00 Measurement hose 1,500 mm8308-20-00 Measurement hose 2,000 mm8308-25-00 Measurement hose 2,500 mm8308-32-00 Measurement hose 3,200 mm8308-40-00 Measurement hose 4,000 mm8308-45-00 Measurement hose 4,500 mm8308-50-00 Measurement hose 5,000 mm

8309-02-00 Measurement hose 200 mm8309-03-00 Measurement hose 300 mm8309-04-00 Measurement hose 400 mm8309-06-00 Measurement hose 600 mm8309-08-00 Measurement hose 800 mm8309-10-00 Measurement hose 1,000 mm8309-15-00 Measurement hose 1,500 mm8309-20-00 Measurement hose 2,000 mm8309-25-00 Measurement hose 2,500 mm8309-32-00 Measurement hose 3,200 mm8309-40-00 Measurement hose 4,000 mm8309-50-00 Measurement hose 5,000 mm

8315-00-01 Joint M 16 x 2

8303-00-06 Test nipple M16 x 2 DKLO 06 68303-00-08 Test nipple M16 x 2 DKLO 08 88303-00-10 Test nipple M16 x 2 DKLO 10 108303-00-12 Test nipple M16 x 2 DKLO 12 128303-00-15 Test nipple M16 x 2 DKLO 15 158303-00-18 Test nipple M16 x 2 DKLO 18 188303-00-22 Test nipple M16 x 2 DKLO 22 228303-00-28 Test nipple M16 x 2 DKLO 28 288303-00-35 Test nipple M16 x 2 DKLO 35 358303-00-42 Test nipple M16 x 2 DKLO 42 42

8304-00-06 Test nipple M16 x 2 DKSO 06 68304-00-08 Test nipple M16 x 2 DKSO 08 88304-00-10 Test nipple M16 x 2 DKSO 10 108304-00-12 Test nipple M16 x 2 DKSO 12 128304-00-14 Test nipple M16 x 2 DKSO 14 148304-00-16 Test nipple M16 x 2 DKSO 16 168304-00-20 Test nipple M16 x 2 DKSO 20 208304-00-25 Test nipple M16 x 2 DKSO 25 258304-00-30 Test nipple M16 x 2 DKSO 30 308304-00-38 Test nipple M16 x 2 DKSO 38 38



PRODUCT GROUP 804

PRODUCT GROUP 804

PRODUCT GROUP 804

PRODUCT GROUP 804

PRODUCT GROUP 804

PRODUCT GROUP 804

8360ACCESSORiES

FOR MANOMETER

8360MANOMETER Ø63 MM

Connection G 1/4" down



8372TEST EqUiPMENT

wiTH 2 MANOMETERS


Connection G 1/4" back

8363DiGiTAL MANOMETER Ø63 MM



Part number Type Connection Pressure




Part number Type

8360-00-00 Rubber protection to 8360-00/8360-018360-02-00 Rubber protection to 8360-028360-05-00 Front flange 63 mm8360-05-01 Flange for panel installation8360-05-02 Clamp support 63 mm

8360-00-01 Manometer G 1/4" down 1.0 MPa8360-00-02 Manometer G 1/4" down 2.5 MPa8360-00-04 Manometer G 1/4" down 4.0 MPa8360-00-06 Manometer G 1/4" down 6.0 MPa8360-00-10 Manometer G 1/4" down 10.0 MPa8360-00-16 Manometer G 1/4" down 16.0 MPa8360-00-25 Manometer G 1/4" down 25.0 MPa8360-00-40 Manometer G 1/4" down 40.0 MPa8360-00-60 Manometer G 1/4" down 60.0 MPa

8360-02-01 Manometer G 3/8" down 1.0 MPa8360-02-02 Manometer G 3/8" down 2.5 MPa8360-02-04 Manometer G 3/8" down 4.0 MPa8360-02-06 Manometer G 3/8" down 6.0 MPa8360-02-16 Manometer G 3/8" down 16.0 MPa8360-02-25 Manometer G 3/8" down 25.0 MPa8360-02-40 Manometer G 3/8" down 40.0 MPa8360-02-60 Manometer G 3/8" down 60.0 MPa

8372-16-40 Test equipment 2 mano. Basic content: Manometer 16.0 MPa 1pc (8360-00-16) Manometer 40.0MPa 1 pc (8360-00-40) Manometer fitting 2 pc (8307-00-04) Test nipple G 1/8" 1 pc (8301-00-02) Test nipple G 1/4" 1 pc (8301-00-04) Test nipple G 3/8" 1 pc (8301-00-06) Test nipple G 1/2" 1 pc (8301-00-08) Measure hose 2 m 1 pc (8308-20-00)

8372-16-41 Test equipment 2 mano. Basic contents: Manometer 16.0 MPa 1 pc (8360-00-16) Manometer 40.0 MPa 1 pc (8360-00-40) Manometer fitting G 1/4" 2 pc (8307-00-04) Test nipple G 1/8" 1 pc (8301-00-02) Test nipple G 1/4" 1 pc (8301-00-04) Test nipple G 3/8" 1 pc (8301-00-06) Test nipple G 1/2" 1 pc (8301-00-08) Measure hose 2 m 1 pc (8308-20-00) Digital manometer 0-700 bar 1 pc(8363-00-70) Rubber protection 1 pc (8360-00-00)

8372-16-42 Equipment bag 2, empty

8360-01-01 Manometer G 1/4" back 1.0 MPa8360-01-02 Manometer G 1/4" back 2.5 MPa8360-01-04 Manometer G 1/4" back 4.0 MPa8360-01-06 Manometer G 1/4" back 6.0 MPa8360-01-16 Manometer G 1/4" back 16.0 MPa8360-01-25 Manometer G 1/4" back 25.0 MPa8360-01-40 Manometer G 1/4" back 40.0MPa8360-01-60 Manometer G 1/4" back 60.0 MPa

8363-00-70 Pressure: 0–700 Bar Accuracy: 0.2 % Coating: IP65

Front flange

Clamp


9

Table of ContentsHydroscand Machines

Product group 900

Machines Page

In our machine program you can fi nd machines for assem-bly of hydraulic hoses, from swaging machines to collapse mandrels.

The program also includes equipment for assembling, fl aring and bending of pipes.

Our strive is to always develope and approve our assortment of machines. Therefore we continually develop our automatic machines.

On our website, www.hydroscand.com/mac you can always fi nd the latest news regarding new machines.

Note that in this catalogue we only present a few of our machines. For more information, please contact your nearest Hydroscand offi ce.

Cutting machines 280 - 281 Skive- & Insert machines 282 - 284 Swaging machines 285 - 287 Other machines and accessories 288 - 291 Pipe bending machines 292


CUTTING MACHINES PRODUCT GROUP 900

PowerCut 5-75A pneumatic hose cutting machine for the big workshop. The crosscutter is equipped with a 7,5kW motor and a 520 mm blade. Suitable for 4 and 6 braided steel hose from dimension 3/16” to 2” and industrial hoses up to dimension 3”.9010-00-00 PowerCut 5-75 400V / 7,5kW 520 mm blade, pneumatic

MaxiCut 5-60An effi cient, pneumatic hose cutting machine for the big work-shop. The cutter is equipped with a 5kW motor and a 400 mm blade. Suitable for 4 braided steel hose from dimension 3/16” to 2”.9009-00-00 MaxiCut 5-60 400V / 5kW 400 mm blade, pneumatic

MiniCut 5-50An effi cient, manual hose cutter for the medium-sized work-shop.The cutter has a 300 mm blade. Suitable for 2 braided steel hoses from dimension 3/16” to 2”.9006-03-00 MiniCut 5-50 12/24V / 1kW 300 mm blade9006-02-00 MiniCut 5-50 1x230V / 2,2kW 300 mm blade9006-01-00 MiniCut 5-50 3x400V / 3kW 300 mm blade

ScrapCut 5-50A cutting machine for hose recycling. The fi tting has to be cut of the before recycling of the hose. Since an exact cutting is not necessary, a guillotine is used for an easy and quick cut of the hose. With this method you can avoid smoke and dust.ScrapCut 5-50 cuts all types of hoses up to 2".9010-10-00 ScrapCut 5-50


PRODUCT GROUP 900 CUTTING MACHINES

9

AutoCut 5-32A computer controlled and fully automatic hose cutting machine.The cutter is equiped with a 5,5kW motor and a 520 mm blade. Suitable for 1 and 2 braided steel hoses from dimension 3/16” to 1 1/4” and 4 braided steel hoses upp to dimension 1”. The PLC makes simple programming with memory possible. The machine is designed to facilitate the changing of tools. To improve producti-vity a hose reel and a conveying belt is used.9080-01-00 AutoCut 5-32 400V / 5,5kW

Cutting bladeBlades for the best cutting result. We have three different types; one standard blade and two toothed blades, all manu-fatured in hardened steel. The blades gives quick and clean cutting results on both 4 and 6 braided steel hoses. Avaliable in dimensions from 200 mm up to 520 mm.Cutting blades9002-00-02 Blade std. 200x3/40 mm9001-00-01 Blade std. 250x3/16 mm9001-00-02 Blade std. 250x3/25 mm9006-06-01 Blade std. 250x3/25,4 mm9006-00-01 Blade std. 250x3/32 mm9003-00-01 Blade std. 300x3/16 mm9009-01-01 Blade std. 400x4/50 mm9005-00-01 Blade std. 520x3/38 mm9006-01-02 Toothed blade 250x3/40 mm9003-01-02 Toothed blade 300x3/50 mm9009-01-02 Toothed blade 400x3/50 mm9005-00-03 Toothed blade 520x3/38 mm9005-00-04 Toothed blade 520x3/50 mm

Adapterringar9006-01-05 Adapter ring for toothed blade 40x25,4 mm9006-01-06 Adapter ring for toothed blade 40x32 mm9005-01-07 Adapter ring for toothed blade 50x32 mm9005-01-04 Adapter ring for toothed blade 50x38 mm9005-01-05 Adapter ring for toothed blade 50x40 mm

SemiCut 4-20CTSSemiCut 4-20CTS is an automatic hose cutting machine, that uses a high speed servo-motor to give a quick and exact cutting of the hose (+/- 1mm). The touch display has a storage capacity for up to 1200 part number confi gurationes.9079-00-02 SemiCut 4-20CTS 230V / 0,4kW, servo-motor

KnifeCut 4-30BTKnifeCut 4-30BT is a pneumatically driven cutting machine for cabel, polyamid and textile reinforced hose. Suitable for hoses with an outside diameter of 4-30mm. Delivered with two tools, one for standard hoses and one for twin hoses.9085-01-01 KnifeCut 4-30BT


SKIVING AND INSERT MACHINES PRODUCT GROUP 900

MidiSkive 5-50B / MidiSkive 5-50CA skiving machine for benched use in the medium-sized work-shop for in- and outer skiving. MidiSkive is easy to control with either a button or a foot pedal. It can also be delivered com-plete with a work bench and toolholder (MidiSkive 5-50C).9020-04-01 MidiSkive 5-50B 400 V/0,37kW motor, complete skiving machine excl. table.9020-03-00 MidiSkive 5-50C 400 V/0,37kW motor, complete skiving machine with table and tool panel

SkivingManA manual skiving machine, for use in a vice. SkivingMan is suitable for small workshops and is very easy to handle.Use with our skive tools 9022 - EST.9020-00-05 Skivingman, manual skiving machine (ecl. tools)

PowerSkive 5-50A semi-automatic skiving machine for inner- and outer skiving. Also designed for assembling of hose and fi tting. The machine is quick, reliable and easy to use. A unique centering system assures that the hose is correctly aligned during the entire skiving and inserting process.9082-03-00 PowerSkive 5-50, skiving- & insert machine 400 V/0,37kW motor, 315 rpm


PRODUCT GROUP 900 SKIVING AND INSERT MACHINES

9

Skiving tool, external, short arm - EST 9022-00-00 Holder for skiving tool + 1 short arm.9022-00-01 Short arm9022-00-03 Cutting steel9022-02-03 Mandrel 3/16"9022-00-04 Mandrel 1/4"9022-00-05 Mandrel 5/16"9022-00-06 Mandrel 3/8"9022-00-08 Mandrel 1/2"9022-00-10 Mandrel 5/8"9022-00-12 Mandrel 3/4"9022-00-16 Mandrel 1"Skiving tool, external, long arm - EST 9022-01-00 Holder for skiving tool + 1 long arm.9022-00-02 Long arm9022-00-03 Cutting steel9022-01-20 Mandrel 1 1/4" long9022-01-24 Mandrel 1 1/2" long9022-01-32 Mandrel 2" longSkiving tool, internal, adjustable - IST9025-01-05 Cutting steel internal, 5 mm - 3/8"9025-01-06 Cutting steel internal, 6 mm - 1/2"9025-01-08 Cutting steel internal, 8 mm - 5/8" - 3/4"9025-01-10 Cutting steel internal, 10 mm - 1" - 1 1/4"9025-02-10 Cutting steel internal (long), 10 mm - 1 1/2" - 2"9025-15-06 Internal skiving tool R9R/SSH4 3/8"9025-15-08 Internal skiving tool R9R/SSH4 1/2"9025-15-10 Internal skiving tool R9R/SSH4 5/8"9025-15-12 Internal skiving tool R9R/SSH4 3/4"9025-15-16 Internal skiving tool R9R/SSH4 1"9025-15-20 Internal skiving tool R9R/SSH4 1 1/4"9025-15-24 Internal skiving tool R9R/SSH4 1 1/2"9025-15-32 Internal skiving tool R9R/SSH4 2"Skiving tool external/internal, adjustable - OST9025-16-08 External/internal skiving tool incl. cutting steel 1/2"9025-16-10 External/internal skiving tool incl. cutting steel 5/8"9025-16-12 External/internal skiving tool incl. cutting steel 3/4"9025-16-16 External/internal skiving tool incl. cutting steel 1"9025-16-20 External/internal skiving tool incl. cutting steel 1 1/4"9025-16-24 External/internal skiving tool incl. cutting steel 1 1/2"9025-16-32 External/internal skiving tool incl. cutting steel 2"

TwinSkive 5-50A new semi-automatic skiving machine, which skives both internally and externally. OneSkive can also, with the Push-On tool, assemble hose and fi tting. The machine is quick, reliable and easy to handle. A unique centering system assures that the hose is correctly aligned during the entire skiving and inserting process.9082-02-00 TwinSkive 5-50, skive- & insertmachine 400 V/0,37kW motor, 315 rpm

Skiving toolsThe assortment consists of both inner- and outer skiving tools.The external tool, that can be supplied with two cutters that are used on braided and sprial layered hoses. The internal tool is mainly used on braided high pressure hoses. We also have a new skiving tool for Oneskive 5-50, that makes inner and outer skiving possible at the same time.

EST

EST - double

IST

OST


SKIVING AND INSERT MACHINES PRODUCT GROUP 900

Push-On toolTools for a quick and easy assembling of both straight and elbow hose fi ttings with the hose. The Push-On tool is used on AutoSkive 5-50, OneSkive 5-50 and AutoInsert 5-50.

Push-On tool to straight fi ttings 9083-01-03 Push-on tool straight 3/16"9083-01-04 Push-on tool straight 1/4"9083-01-05 Push-on tool straight 5/16"9083-01-06 Push-on tool straight 3/8"9083-01-08 Push-on tool straight 1/2"9083-01-10 Push-on tool straight 5/8"9083-01-12 Push-on tool straight 3/4"9083-01-16 Push-on tool straight 1"9083-01-20 Push-on tool straight 1 1/4"9083-01-24 Push-on tool straight 1 1/2"9083-01-32 Push-on tool straight 2"Push-On tool to 45 and 90 degree fi ttings 9083-02-03 Push-on tool 45/90 degree 3/16"9083-02-04 Push-on tool 45/90 degree 1/4"9083-02-05 Push-on tool 45/90 degree 5/16"9083-02-06 Push-on tool 45/90 degree 3/8"9083-02-08 Push-on tool 45/90 degree 1/2"9083-02-10 Push-on tool 45/90 degree 5/8"9083-02-12 Push-on tool 45/90 degree 3/4"9083-02-16 Push-on tool 45/90 degree 1"9083-02-20 Push-on tool 45/90 degree 1 1/4"9083-02-24 Push-on tool 45/90 degree 1 1/2"9083-02-32 Push-on tool 45/90 degree 2" Push-On tool for fi ttings with ferrule stop ”plastic ring”9083-03-03 Push-on tool 45/90 degree 3/16" PR9083-03-04 Push-on tool 45/90 degree 1/4" PR9083-03-05 Push-on tool 45/90 degree 5/16" PR9083-03-06 Push-on tool 45/90 degree 3/8" PR9083-03-08 Push-on tool 45/90 degree 1/2" PR9083-03-10 Push-on tool 45/90 degree 5/8" PR9083-03-12 Push-on tool 45/90 degree 3/4" PR9083-04-XX Push-on tool 45/90 degree

Special manufactured according to customer request

TwinPush 5-50A semi-automatic machine for the easy assembling of hose and fi tting. The machine is quick, reliable and easy to use.A unique centering system that assures that the hose is cor-rectly aligned during the entire skiving and inserting process. The machine is equiped with two tool holders, which makes it easy to change between the tool for straight fi ttings and the tool for 45°/90° fi ttings.9083-03-00 TwinPush 5-50, insert machine 230 V, excl. tool


PRODUCT GROUP 900 SWAGING MACHINES

9

SwagingMan

Swaging toolA manual swaging tool mounted in a vice. SwagingMan is very easy to handle for low pressure hoses.SwagingMan9025-00-01 SwagingMan 8-20, swaging tool for low pressure hose 8-20mm9025-01-01 SwagingMan 9-19, swaging tool for low pressure hose 9-19mm9025-02-01 SwagingMan 9-28, swaging tool for low pressure hose 8-28mm Benchtop model

Portable hose swaging machinesHydroscand assortment of portable hose swages covers eve-rything from P16HP with hand pump units, to P32CS driven by battery. P32CS are suitable for hoses up to 2” and are equi-ped with QC-system for extra quick die change.P16 HP excl. dies9070-00-00 P16 HP 3/16"-1"Swaging dies to P16 HP9070-16-XX Standard dies (per dia.) 16-14/16-31P20 excl. dies9066-00-00 P20 HP 3/16"- 1 1/4"9066-00-03 P20 CS 3/16"- 1 1/4" 12-24VSwaging dies to P209063-20-XX QC-standard dies ( per dim.) 20-10/20-479063-20-XXM Marking dies ( per dim.) 20-14/20-479060-3X-XXM Stamp engraving - logo, digits, lettersP32 excl. dies 9062-32-00 P32 CS swaging 3/16"-2" 12-24VSwaging dies P32 9060-32-XX QC-Standard dies ( per dim.) 32-10/32-699060-32-XXM Marking dies ( per dim.) 32-14/32-699060-3X-XXM Stamp engraving - logo, digits, letters

P 20 HP

P 32 CS

P 16 HP


SWAGING MACHINES PRODUCT GROUP 900

"P" range of swaging machinesThe "P" series, medium-sized, swaging machines covers everything from P20MS to micro processed controlled P50VS. All models are equiped with QC-system for extra quick change of dies.The swages are manufactured in different designs: MS, IS, AS and VS.The difference between the models are mainly the kind of controll equipment the machine has. The MS-model are ma-nufactured with a potentiometer on the swage head. IS- and AS-models have a stepless potentiometer adjustment of swa-ging- and opening diameter. The VS-modell is computerized and has a tool management memory that can memorize up to 200 different sets and swage dimensions.P20 excl. dies9068-00-00 P20 MS swage 3/16"- 1 1/4"9068-00-03 P20 MS swage 3/16"- 1 1/4", 1-phase 230 V/1,5 kW.9068-00-04 P20 IS swage 3/16"- 1 1/4"9068-00-08 P20 IS swage 3/16"- 1 1/4", 1-phase 230 V/1,5 kW.9068-00-05 P20 AS swage 3/16"- 1 1/4"9068-00-09 P20 AS swage 3/16"- 1 1/4", 1-phase 230 V/1,5 kW.9068-00-07 P20 VS swage 3/16"- 1 1/4"Swaging dies to P209063-20-XX QC-standard dies ( per dim.) 20-10/20-479063-20-XXM Marking dies ( per dim.) 20-14/20-479060-3X-XXM Stamp engraving - logo, digits, lettersAccessories to P209064-00-02 QC-stand P20, incl. QC-tool, excl. dies9064-01-02 Stand P20/32 without QC-system9064-00-06 Mechanical backstopp P209064-00-07 QC-bytestool P20P32 excl. dies 9062-01-00 P32 MS swage 3/16"-2"9062-01-01 P32 MS swage 3/16"-2", 1-phase 230V/1,5kW. 9062-01-02 P32 IS swage 3/16"-2"9062-01-03 P32 AS swage 3/16"-2"9062-01-04 P32 VS swage 3/16"-2"Swaging dies P32 9060-32-XX QC-Standard dies ( per dim.) 32-10/32-699060-32-XXM Marking dies ( per dim.) 32-14/32-699060-3X-XXM Stamp engraving - logo, digits, lettersAccessories to P329062-00-04 QC-stand P32/P50, incl. QC-tool, excl. dies 9060-00-01 Mechanical back stop P32 MS9062-00-06 QC-bytestool P32P50 excl. dies 9062-01-50 P50 MS swaging 3/16"-2"9062-02-50 P50 IS swaging 3/16"-2"9062-03-50 P50 AS swaging 3/16"-2"9062-04-50 P50 VS swaging 3/16"-2"Swaging dies P50 9060-32-XX QC-Standard dies ( per dim.) 32-10/32-699060-32-XXM Marking dies ( per dim.) 32-14/32-699060-3X-XXM Stamp engraving - logo, digits, lettersAccessories to P509062-00-04 QC-stand P32/P50, incl. QC-tool, excl. dies 9060-50-01 Mechanical backstopp P509062-00-06 QC-bytestool P50

P 20 MS

P 50 VS

Swaging dies

Marking die


PRODUCT GROUP 900 SWAGING MACHINES

9

FP Ragne of swaging machinesThe ”heavy” FP-serie consists of microprocessor controlled swages with a memory function. The swaging machines are developed to give an exact swaging result, a high swage power and a quick reaction time. The FP-serie are excellent for mutiple production. All models are equiped with QC-system for an extra quick die change.

FP 20 FP 110 - FP 120

FP 140 FP 160 - FP 165

FP20 incl. QC-tool, excl. dies9061-50-20 FP20 IS swage 3/16"- 1 1/4"9061-51-20 FP20 AS swage 3/16"- 1 1/4"9061-52-20 FP20 VS swage 3/16"- 1 1/4"

FP110 incl. QC-tool, excl. dies9061-11-10 FP110 IS swage 3/16"-2"9061-11-11 FP110 AS swage 3/16"-2"9061-21-10 FP110 VS swage 3/16"-2"

FP160 excl. dies9061-11-60 FP160 IS swage 3/16"-6"9061-11-61 FP160 AS swage 3/16"-6"9061-21-60 FP160 VS swage 3/16"-6"

FP165 excl. dies9061-61-65 FP165 IS swage 3/16"-6"9061-61-66 FP165 AS swage 3/16"-6"9061-61-60 FP165 VS swage 3/16"-6"

Swaging dies FP-machines 9060-32-XX QC-Standard dies ( per dim.) 32-10/32-699060-32-XXM Marking dies ( per dim.) 32-14/32-699060-3X-XXM Stamp engraving - logo, digits, letters9061-01-63 Adapter set for 3/16"- 2" dies FP160/FP1659061-01-XX Special dies 2" - 6" (per dim.) FP160/FP165Accessories to FP-machines9062-00-06 QC-changing tool FP-machines

FP120 incl. QC-tool, excl. dies9061-11-20 FP120 IS swage 3/16"-2"9061-11-21 FP120 AS swage 3/16"-2"9061-21-20 FP120 VS swage 3/16"-2"

FP120S incl. QC-tool, excl. dies9061-41-20 FP120S IS swage 3/16"-2"9061-41-21 FP120S AS swage 3/16"-2"9061-41-22 FP120S VS swage 3/16"-2"

FP140 incl. QC-tool, excl. dies 9061-42-20 FP140 IS swage 3/16"-2"9061-42-21 FP140 AS swage 3/16"-2"9061-42-22 FP140 VS swage 3/16"-2"


MACHINES, ACCESSORIES PRODUCT GROUP 900

HAC P20/P32A workbench for all needs. Hose Assembly Centre, the com-plete hose mounting workshop, equiped with all that you need for a safe and professional hose mounting. It can be delivered with hose reel, hose cutting machine, skiving machine, hose swage marking machine, cleaning equipment and all the nec-cessary accessories.

HoseReel 1 / HoseReel 7Hose reel for one or many hoses. Hose Reel 1 simplifi es the hose handling remarkbly, and can be used for hoses with dimension from 1/8” to 4”. With HoseReel 7 you can save a lot of time since the most common hose types are always avaliable. All baskets (exept from the bottom basket) can be swung out horizontally, so a new roll can easily be placed in the basket easily. HoseReel 7 is suitable for hoses with dimension from 3/16” to 1 1/4”.9004-00-03 HoseReel 1, hose reel9004-00-07 HoseReel 7, hose reel

AutoReel V / AotoReel HA motorized hose reel with a stepless speed control for an easy hose reeling. Ideal for long hoses. Can easily be combined with HoseReel 1, for a easier handling.AutoReel V is designed for hoses with dimension from 1/8” to 1 1/4”.AutoReel H is suitable for hoses with dimension from 1/8” to 2”.9004-02-03 AutoReel V, hose reel9004-01-03 AutoReel H, hose reel


PRODUCT GROUP 900 MACHINES, ACCESSORIES

9

MarkManA manual or pneumatic machine for marking of ferrules (be-fore swaging). The marking machine can be used on any hose ferrule with dimension 3/16” to 2”. The type holder can be provided with 2 or 3 text rows alt. with a complete 8-digit marking wheel.Marking machines 9031-10-01 MarkMan II-M, manual marking machine excl. types/holders9031-10-02 MarkMan II-P, pneumatic marking machine excl. types/holders9031-10-03 Type holders 2 (2 rows, 4mm)9031-10-04 Type holders 3 (3 rows, 4mm)9031-11-03 Type holders 2 (2 rows, 3mm)9031-11-04 Type holders 3 (3 rows, 3mm)9031-10-07 Type holders special (2-3 rows, spec.) acc. to customer request9031-10-05 QC-adapter to type holders HSAM 49031-00-04 Etui kit 4mm with types, suitable for 9031-10-03/049031-12-04 Etui kit 3mm with types, suitalbe for 9031-11-03/049031-00-06 Marking wheel AM 4-8 wheel9031-10-06 QC-adapter to marking wheel AM 4-8

Swaging mandrelsTo control that the swaging has resulted in the right internal collapse. GO-side should pass through the fi tting to make sure that the swaging is not overdone, whilst the STOP-side should stop in the middle of the tail to insure that the swaging is suffi cient.Swaging mandrels9011-00-03 Swaging mandrels X/3000-serie fi ttings9011-00-04 Swaging mandrels X/3000-serie fi ttings9011-00-05 Swaging mandrels X/3000-serie fi ttings9011-00-06 Swaging mandrels X/3000-serie fi ttings9011-00-08 Swaging mandrels X/3000-serie fi ttings9011-00-10 Swaging mandrels X/3000-serie fi ttings9011-00-12 Swaging mandrels X/3000-serie fi ttings9011-00-16 Swaging mandrels X/3000-serie fi ttings9011-00-20 Swaging mandrels X/3000-serie fi ttings9011-00-24 Swaging mandrels X/3000-serie fi ttings9011-00-32 Swaging mandrels X/3000-serie fi ttings9012-00-04 Swaging mandrels H/4000-serie fi ttings9012-00-06 Swaging mandrels H/4000-serie fi ttings9012-00-08 Swaging mandrels H/4000-serie fi ttings9012-00-10 Swaging mandrels H/4000-serie fi ttings9012-00-12 Swaging mandrels H/4000-serie fi ttings9012-00-16 Swaging mandrels H/4000-serie fi ttings9012-00-20 Swaging mandrels H/4000-serie fi ttings9012-00-24 Swaging mandrels H/4000-serie fi ttings9012-00-32 Swaging mandrels H/4000-serie fi ttings9013-00-04 Swaging mandrels IL/4400-serie fi ttings9013-00-06 Swaging mandrels IL/4400-serie fi ttings9013-00-08 Swaging mandrels IL/4400-serie fi ttings9013-00-10 Swaging mandrels IL/4400-serie fi ttings9013-00-12 Swaging mandrels IL/4400-serie fi ttings9013-00-16 Swaging mandrels IL/4400-serie fi ttings9013-00-20 Swaging mandrels IL/4400-serie fi ttings9013-00-24 Swaging mandrels IL/4400-serie fi ttings9013-00-32 Swaging mandrels IL/4400-serie fi ttings9014-00-06 Swaging mandrels IL-BL/4500-serie fi ttings9014-00-08 Swaging mandrels IL-BL/4500-serie fi ttings9014-00-10 Swaging mandrels IL-BL/4500-serie fi ttings9014-00-12 Swaging mandrels IL-BL/4500-serie fi ttings9014-00-16 Swaging mandrels IL-BL/4500-serie fi ttings

Swaging mandrelsFor 4200- series9015-00-03 Swaging mandrels X/4200-serie fi ttings9015-00-04 Swaging mandrels X/4200-serie fi ttings9015-00-05 Swaging mandrels X/4200-serie fi ttings9015-00-06 Swaging mandrels X/4200-serie fi ttings9015-00-08 Swaging mandrels X/4200-serie fi ttings9015-00-10 Swaging mandrels X/4200-serie fi ttings9015-00-12 Swaging mandrels X/4200-serie fi ttings9015-00-16 Swaging mandrels X/4200-serie fi ttings9015-00-20 Swaging mandrels X/4200-serie fi ttings9015-00-24 Swaging mandrels X/4200-serie fi ttings9015-00-32 Swaging mandrels X/4200-serie fi ttings


MACHINES, ACCESSORIES PRODUCT GROUP 900

E-CleanerFor a quick and simple cleaning of all sorts of hose and pipe. The system uses a foam rubber plug that gets shot in through the hose/tube with compressed air. Nozzles are avaliable with a dimension from 3/16” to 2” and for tubes with dimension from 4 mm. to 60mm. We also have a more simple model in which the hose/tube is cleaned only with air pressure.E-Cleaner mini9035-00-00 E-Cleaner mini 4030 compl. case with 8 hose nozzles optional9035-00-01 E-Cleaner mini 4060 compl. case with 8 tube nozzles optional9035-01-01 E-Cleaner mini 4010 pistol excl. nozzleNozzle, hose9035-02-03 E-Cleaner mini hose nozzles 3/16"9035-02-04 E-Cleaner mini hose nozzles 1/4"9035-02-05 E-Cleaner mini hose nozzles 5/16"9035-02-06 E-Cleaner mini hose nozzles 3/8"9035-02-08 E-Cleaner mini hose nozzles 1/2"9035-02-10 E-Cleaner mini hose nozzles 5/8"9035-02-12 E-Cleaner mini hose nozzles 3/4"9035-02-16 E-Cleaner mini hose nozzles 1"Nozzle, tube9035-06-03 E-Cleaner mini tube nozzles 6x1,59035-06-04 E-Cleaner mini tube nozzles 6x19035-08-05 E-Cleaner mini tube nozzles 8x1,59035-10-05 E-Cleaner mini tube nozzles 10x2.59035-10-07 E-Cleaner mini tube nozzles 10x1.59035-12-06 E-Cleaner mini tube nozzles 12x39035-12-08 E-Cleaner mini tube nozzles 12x29035-12-09 E-Cleaner mini tube nozzles 12x1,59035-14-09 E-Cleaner mini tube nozzles 14x2,59035-15-11 E-Cleaner mini tube nozzles 15x29035-15-12 E-Cleaner mini tube nozzles 15x1,59035-16-10 E-Cleaner mini tube nozzles 16x39035-16-12 E-Cleaner mini tube nozzles 16x29035-18-14 E-Cleaner mini tube nozzles 18x29035-18-15 E-Cleaner mini tube nozzles 18x1,59035-20-12 E-Cleaner mini tube nozzles 20x49035-20-14 E-Cleaner mini tube nozzles 20x39035-20-16 E-Cleaner mini tube nozzles 20x29035-22-16 E-Cleaner mini tube nozzles 22x39035-22-18 E-Cleaner mini tube nozzles 22x29035-22-19 E-Cleaner mini tube nozzles 22x1,59035-25-15 E-Cleaner mini tube nozzles 25x59035-25-19 E-Cleaner mini tube nozzles 25x39035-28-22 E-Cleaner mini tube nozzles 28x39035-28-24 E-Cleaner mini tube nozzles 28x29035-30-20 E-Cleaner mini tube nozzles 30x59035-30-24 E-Cleaner mini tube nozzles 30x39035-XX-XX E-Cleaner tube nozzles mini, special dim.

E-Cleaner maxi9033-00-00 E-Cleaner maxi 2030 compl. case with 9 optional hose nozzles9033-00-01 E-Cleaner maxi 2010 pistol excl. nozzle9033-00-25 Bench holder 20509034-00-00 E-Cleaner maxi 2060 compl. case with 9 optional tube nozzlesNozzle, hose9033-02-03 E-Cleaner maxi hose nozzles 3/16"9033-02-04 E-Cleaner maxi hose nozzles 1/4"9033-02-05 E-Cleaner maxi hose nozzles 5/16"9033-02-06 E-Cleaner maxi hose nozzles 3/8"9033-02-08 E-Cleaner maxi hose nozzles 1/2"9033-02-10 E-Cleaner maxi hose nozzles 5/8"9033-02-12 E-Cleaner maxi hose nozzles 3/4"9033-02-16 E-Cleaner maxi hose nozzles 1"9033-02-20 E-Cleaner maxi hose nozzles 1 1/4"9033-02-24 E-Cleaner maxi hose nozzles 1 1/2"9033-02-32 E-Cleaner maxi hose nozzles 2"Nozzle, tube9033-03-00 E-Cleaner 3000 Adapter ring for tube nozzles t.o.m. 38 mm.9034-04-03 E-Cleaner maxi tube nozzles 4x 0,75 spec.9034-05-03 E-Cleaner maxi tube nozzles 5x19034-06-02 E-Cleaner maxi tube nozzles 6x29034-06-03 E-Cleaner maxi tube nozzles 6x1,59034-06-04 E-Cleaner maxi tube nozzles 6x19034-08-05 E-Cleaner maxi tube nozzles 8x1,59034-08-06 E-Cleaner maxi tube nozzles 8x2,59034-10-05 E-Cleaner maxi tube nozzles 10x2.59034-10-07 E-Cleaner maxi tube nozzles 10x1.59034-12-06 E-Cleaner maxi tube nozzles 12x39034-12-08 E-Cleaner maxi tube nozzles 12x29034-12-09 E-Cleaner maxi tube nozzles 12x1,59034-14-07 E-Cleaner maxi tube nozzles 14x3,59034-14-09 E-Cleaner maxi tube nozzles 14x2,59034-15-11 E-Cleaner maxi tube nozzles 15x29034-16-10 E-Cleaner maxi tube nozzles 16x39034-16-12 E-Cleaner maxi tube nozzles 16x29034-18-13 E-Cleaner maxi tube nozzles 18x2,59034-18-14 E-Cleaner maxi tube nozzles 18x29034-18-15 E-Cleaner maxi tube nozzles 18x1,59034-20-12 E-Cleaner maxi tube nozzles 20x49034-20-14 E-Cleaner maxi tube nozzles 20x39034-22-16 E-Cleaner maxi tube nozzles 22x39034-22-18 E-Cleaner maxi tube nozzles 22x29034-25-15 E-Cleaner maxi tube nozzles 25x59034-25-19 E-Cleaner maxi tube nozzles 25x39034-28-18 E-Cleaner maxi tube nozzles 28x59034-28-22 E-Cleaner maxi tube nozzles 28x39034-28-24 E-Cleaner maxi tube nozzles 28x29034-30-20 E-Cleaner maxi tube nozzles 30x59034-30-24 E-Cleaner maxi tube nozzles 30x39034-35-29 E-Cleaner maxi tube nozzles 35x39034-35-31 E-Cleaner maxi tube nozzles 35x29034-38-28 E-Cleaner maxi tube nozzles 38x59034-38-30 E-Cleaner maxi tube nozzles 38x49034-38-32 E-Cleaner maxi tube nozzles 38x39034-42-34 E-Cleaner maxi tube nozzles 42x49034-42-36 E-Cleaner maxi tube nozzles 42x39034-42-38 E-Cleaner maxi tube nozzles 42x29034-50-38 E-Cleaner maxi tube nozzles 50x69034-50-40 E-Cleaner maxi tube nozzles 50x59034-50-44 E-Cleaner maxi tube nozzles 50x39034-60-50 E-Cleaner maxi tube nozzles 60x509034-xx-xx E-Cleaner maxi tube nozzles, special manuf. Max. 60 mm.


PRODUCT GROUP 900 MACHINES, ACCESSORIES

9

MaxiClean 5-32A new PLC controlled cleaning machine for tube andhose with dimension 3/16” to 1 1/4”.The machine is extremly easy to use. The hose or the tube is cleaned with a waterbased fl uid in a tempera-tur between +55°C - 70°C, to reach a certain clean level equvalent to ISO 16/12.Cleaning machines9087-00-00 MaxiClean 5-32, computerized cleaning machine for 1 hose/tube at a time.9087-02-00 MaxiClean 5-32, computerized cleaning machine for 2 hoses/tubes at a time.

E-Cleaner system Cobra9034-90-00 E-Cleaner Cobra, semi-automatic pistol for 3/16" - 2"Nozzle, hose9034-90-03 E-Cleaner Cobra hose nozzle 3/16"9034-90-04 E-Cleaner Cobra hose nozzle 1/4"9034-90-05 E-Cleaner Cobra hose nozzle 5/16"9034-90-06 E-Cleaner Cobra hose nozzle 3/8"9034-90-08 E-Cleaner Cobra hose nozzle 1/2"9034-90-10 E-Cleaner Cobra hose nozzle 5/8"9034-90-12 E-Cleaner Cobra hose nozzle 3/4"9034-90-16 E-Cleaner Cobra hose nozzle 1"9034-90-20 E-Cleaner Cobra hose nozzle 1 1/4"9034-90-24 E-Cleaner Cobra hose nozzle 1 1/2"9034-90-32 E-Cleaner Cobra hose nozzle 2"

E-Cleaner system 2000 SA9034-92-00 E-Cleaner 2000 SA, semi-automatic machine for 3/16" - 2"Nozzle, hose9033-02-03 E-Cleaner 2000 SA hose nozzle 3/16"9033-02-04 E-Cleaner 2000 SA hose nozzle 1/4"9033-02-05 E-Cleaner 2000 SA hose nozzle 5/16"9033-02-06 E-Cleaner 2000 SA hose nozzle 3/8"9033-02-08 E-Cleaner 2000 SA hose nozzle 1/2"9033-02-10 E-Cleaner 2000 SA hose nozzle 5/8"9033-02-12 E-Cleaner 2000 SA hose nozzle 3/4"9033-02-16 E-Cleaner 2000 SA hose nozzle 1"9033-02-20 E-Cleaner 2000 SA hose nozzle 1 1/4"9033-02-24 E-Cleaner 2000 SA hose nozzle 1 1/2"9033-02-32 E-Cleaner 2000 SA hose nozzle 2"

E-Cleaner system BIG BANG for tube9034-94-00 E-Cleaner system BIG BANG for 2 1/2" - 6" tube, tube nozzles on request

Plugg, hose9032-02-03 E-Cleaner plugg for hose diam. 3/16"9032-02-04 E-Cleaner plugg for hose diam. 1/4"9032-02-05 E-Cleaner plugg for hose diam. 5/16"9032-02-06 E-Cleaner plugg for hose diam. 3/8"9032-02-08 E-Cleaner plugg for hose diam. 1/2"9032-02-10 E-Cleaner plugg for hose diam. 5/8"9032-02-12 E-Cleaner plugg for hose diam. 3/4"9032-02-16 E-Cleaner plugg for hose diam. 1"9032-02-20 E-Cleaner plugg for hose diam. 1 1/4"9032-02-24 E-Cleaner plugg for hose diam. 1 1/2"9032-02-32 E-Cleaner plugg for hose diam. 2"Plugg, tube9032-01-04 E-Cleaner plugg for tube, inv. diam. 3mm9032-01-05 E-Cleaner plugg for tube, inv. diam. 4mm9032-01-07 E-Cleaner plugg for tube, inv. diam. 5mm9032-01-08 E-Cleaner plugg for tube, inv. diam. 6mm9032-01-09 E-Cleaner plugg for tube, inv. diam. 7mm9032-01-10 E-Cleaner plugg for tube, inv. diam. 8mm9032-01-12 E-Cleaner plugg for tube, inv. diam. 9mm9032-01-14 E-Cleaner plugg for tube, inv. diam. 10-11mm9032-01-16 E-Cleaner plugg for tube, inv. diam. 12mm9032-01-18 E-Cleaner plugg for tube, inv. diam. 13-14mm9032-01-20 E-Cleaner plugg for tube, inv. diam. 15mm9032-01-22 E-Cleaner plugg for tube, inv. diam. 16-17mm9032-01-25 E-Cleaner plugg for tube, inv. diam. 18mm9032-01-26 E-Cleaner plugg for tube, inv. diam. 19mm9032-01-28 E-Cleaner plugg for tube, inv. diam. 20-21mm9032-01-30 E-Cleaner plugg for tube, inv. diam. 22-23mm9032-01-33 E-Cleaner plugg for tube, inv. diam. 24-25mm9032-01-35 E-Cleaner plugg for tube, inv. diam. 26-27mm9032-01-38 E-Cleaner plugg for tube, inv. diam. 28mm9032-01-40 E-Cleaner plugg for tube, inv. diam. 29-31mm9032-01-45 E-Cleaner plugg for tube, inv. diam. 32-35mm9032-01-48 E-Cleaner plugg for tube, inv. diam. 34-37mm9032-01-50 E-Cleaner plugg for tube, inv. diam. 36-40mm9032-01-55 E-Cleaner plugg for tube, inv. diam. 41-45mm9032-01-60 E-Cleaner plugg for tube, inv. diam. 46-50mm9032-01-65 E-Cleaner plugg for tube, inv. diam. 51-55mm


TUBE BENDING MACHINES PRODUCT GROUP 900

MEGA BENDER 030Maximum capacity 70x4mm

9040-01-30P.A.

TOP BENDER 050Maximum capacity 60x4mm

9040-01-50P.A.

SUPER BENDER 060AMaximum capacity 50x4mm

9040-01-60P.A.

MEDI BENDER MB 042PMaximum capacity 42x4mm

9040-01-43P.A.

MEDI BENDER 070Maximum capacity 35x3mm

9040-01-70P.A.

MINI BENDER 092Maximum capacity 28x1,5mm

9040-01-92P.A.

MAXIMUM BENDING CAPACITY FOR MACHINES WITHOUT MANDRELPart number 1/30/40 9040-01-50 9040-01-60 9040-01-43 9040-01-70 9040-01-92 9040-01-80Model 030 MEGA 050 TOP 060A SUPER MB42P 070 MEDI 092 MINI JOLLYGas tube (inch) 2 1/2” 2” 1 1/2” 1 1/4” 1” 3/4” 1/2”Mild steel (mm) 76x4 60x4 48x3,5 42x3,5 35x2,5 28x1,5 22x3Hydraulic tube ST35/ST37 70x5 60x4 50x4 42x3 35x3 28x1,5 22x3Furniture pipe 70x4 60x4 54x1,5 42x4 38x1,5 28x1,5 22x1,5Stainless 304-308-316 76x3 60x2,5 48x2,5 42x3,5 30x2 28x1,5 22x1,5Hard cupper & Aluminium 76x3 60x4 64x2 42x2,5 42x1,5 35x1,5 Alu.22x1,5Solid pole mild steel ST37 45x 35 32 54x2 20 10 -Solid fl at steel ST37 (mm) 120x12 12x10 120x10 - - - -Solid square steel ST37 (mm) 40x40 30x30 30x30 35x35 - - -


10

4200-01-S EN1SN 2SC Ferrules 3294200-02-S EN2SN Ferrules 3294200-04-S EN2SN Ferrules 3294200-15-S R7/R8 Ferrules 3294200-26-S FerrulesP.T.F.E./Teflonsmooth 3294200-30-S FerrulesP.T.F.E./Teflon 3294201-2S G-threadedstraight,slip-onnut 3304202-S G-threadedstraight 3304203-2S G-threaded90°bend,slip-onnut 3304204-2S G-threaded45°bendslip-onnut 3304213-S Unified-threadedstraightcrimpednut 3314214-S Unified-threadedstraight 3314216-S Unified-threaded90°bendcrimpednut 3314217-S Unified-threaded45°bendcrimpednut 3314220-S M-threadedstraightSKL 3314223-S M-threadedstraightSKS 3314226-S Standpipestraight 3324227-S Standpipe90°bend 3324244-S SAEFlange90°bend 3324240-S NPTF-threadedstraight 3324270-2S M-threadedstraightslip-onnut 3324271-2S M-threaded90°bendslip-onnut 3334272-2S M-threaded45°bendslip-onnut 3334273-2S M-threadedstraightslip-onnut 3334274-2S M-threaded90°bendslip-onnut 3334275-2S M-threaded45°bendslip-onnut 333

5001-01 Clawcoupling 3345001-02 Clawcoupling,malethread 3345001-03 Clawcouplingfemalethread 3345001-04 Seal 3345396-0 Normalweldplate 335

5396-3 Inlineweldplate 3355398 Wearrailwithaccessories 3355396-2 Doubleweldplate 3355396-1 Weldplate,Long 3355396-7 Sectionalplate 3355397-0 Capheadboltforwasher 3355397-3 Hexagonboltforsectionalplate 3355397-2 Stackingbolt 335

5561-10 Hoseclampmini 3365565-20 Hoseclamp 3365563 Hoseclamp 3365564 Hoseclamp 3365566-20 Hoseclamp 3365601-03 Rubbersteelbondedwasher 3375601-04 Rubbersteelbondedwasher 337

HyDROsCAnD sTAinLEss sTEEL COmPOnEnTs

Stainlesssteelfluidconnectorsforhydraulicsandpneu-maticsincorrosiveenviromentsandaggressivemedia.

MaterialaccordingtoSS2343/AISI316.

Hydroscandstainlesssteelconnectorsaredesignedforstainlesssteelenviroments:chemicalindustry,marineindustry,foodandbeverageindustry.

Hydroscandreservestherighttomodifyanyorallpartsofthiscataloguewithoutanypriornotice.

swAGE fiTTinGs PAGE

inDUsTRiAL fiTTinGs PAGE

ACCEssORiEs PiPE CLAmPs PAGE

HOsE CLAmPs PAGE

TAbLE Of COnTEnTs


TAbLE Of COnTEnTs

HyDROsCAnD sTAinLEss sTEEL COmPOnEnTs

5558-94 FasterHNV/INOXISOB 3385Txx TEMATseries 338

2603 GE–GBStraightfitting–GM 3402606 GE–MB Straightfitting–MM 3402803 GE–GBStraightfitting–GM 3402806 GE–MB Straightfitting–MM 3402607 GE – NPT Straightfitting–NPTM 3412609 GE – G/ED Straightfitting–GM 3412611 WE – R/C 90°elbowfitting–RM 3412613 WE–GB 90°elbowfitting–GM 3422617 WE – NPT 90°elbowfittingNPT 3422621 TE–R/CT-fitting–RM 3422623 TE–GBT-fitting–GM 3422641 GStraightjointfitting 3432642 WElbowjointfitting 3432643 TT-Jointfitting 3432644 KCrossjointfitting 3432645 SVBulkheadconnection 3442646 WSVElbowbulkheadconnection 3442647 ASStraightweldingboss 3442650 EVWAdjustableelbowfitting 3442660 EVTAdjustableT-fitting 3452670 EVLAdjustableL-fitting 3452689 EVGE–EDStraightfitting 3452701 GAI–GStraightfitting–GF 3452703 MAV–GManometer–fitting 3462704 MAV–EV–GManometer 3462705 REDReduction–fitting 3462707 KOR–LReduction 3472907 KOR–SReduction 3472721 RHV–G–EDNon-returnvalve 3482720 RHDNon-returnvalve 3482723 RHZ–G–EDNon-returnvalve 3482727 RHDINon-returnvalve 3482730 PLPlug 3492747 VHReinforcingring 3492749 DCuttingring 3492750 MNut 349

7802 StraightadaptorGM–GM 3507805 ReductionadaptorGM–GF 3507807 SwiveladaptorGFS–GFS 3507808 StraightswivelGM–GFS 3507809 ReductionadaptorGM–GFlong 3517810 ReductionadaptorGM–GFShort 3517811 StraightbushingGF–GF 3517812 StraightadaptorGM–RM 3517813 StraightadaptorGF–JICM 3517822 StraightadaptorGM–NPTM 3527831 Elbow90°adaptorGM–GFS 3527835 Swivelelbow90°BendGM–GFS 3527836 Elbowadaptor90°GM–RM 3527851 T-AdaptorGM–GM–GM 3527852 T-AdaptorGFS–GFS–GFS 3527853 T-AdaptorGM–GM–GFS 352

7854 L-AdaptorGM–GFS–GM 3537861 PlugGM 3537861-10 PlugRM 3537861-20 PlugRFS 3537863 InsetplugGM 3537890 BulkheadGM–GM 353

7901 JGStraightjointfitting 3547902 JWElbowjointfitting 3547903 JTT-jointfitting 3547904 JKCrossjointfitting 3547911 JGEStraightfitting–NPTF-thread 3547905 JSVStraightbulkhead 3547913 JGEStraightfitting–G-thread 3557914 JGEStraightfitting–UNF-thread 3557920 JWEelbowfitting–NPTF-thread 3557922 JWEAdjustablefitting–G-thread 3557923 JWEAdjustablefitting–UNF-thread 3557951 JGAIStraightfitting–G-thread 3567960 JEVW90°ElbowfittingwithJIC37° 3567959 JGIIStraightadaptorwithJIC37° 3567961 JEVU45°ElbowfittingwithJIC37° 3567962 JEVTT-fittingwithJIC37° 3567963 JEVLL-fittingwithJIC37° 3567966 JEVGEAdaptorwithJIC37°G-thread 3577967 JEVGEAdaptorwithJIC37°UNF-thread 3577981 JMAMeasurementconnection 3577970 JKORReduction 3577990 JPLIBlindnut 3587991 JPLUPlug 3587992 JMNut 3587993 JDClampingsleeve 358

8631 2-wayballvalveG-threaded,female 3598632 2-wayballvalveSKL-connection 3598634 2-wayballvalveSKS-connection 3598641 3-wayreversingvalve,L-drilledG-threaded 3598642 3-wayreversingvalveT-drilledG-threaded 3598690 2-wayballvalvelowpressureshortthread 3598691 3-wayballvalvelowpressureL-drilled 359

8301-90 TestpointsM16x2G-threaded 3608301-94 TestpointsM16x2UNF-threaded 3608301-95 TestpointsM16x2NPT-threaded 3608310 MeasurementhoseM16x2–G1/4" 3608311 MeasurementhoseM16x2–2 360

QUiCk RELEAsE fiTTinGs PAGE

CUTTinG RinG fiTTinGs PAGE fLARE fiTTinGs PAGE

bALL vALvEs PAGE

TEsT POinTs PAGE ADAPTORs PAGE

PRODUCT GROUP 380 sTAinLEss sTEEL swAGE fiTTinGs


10

4200-01-sEn1sn 2sC fERRULEs

Skive / non skive Stainless steel

4200-01-04-S EN1SN,2SC 1/4"4200-01-06-S EN1SN,2SC 3/8"4200-01-08-S EN1SN,2SC 1/2"4200-01-10-S EN1SN,2SC 5/8"4200-01-12-S EN1SN,2SC 3/4"4200-01-16-S EN1SN,2SC 1"4200-01-20-S EN1SN,2SC 11/4"4200-01-24-S EN1SN,2SC 11/2"4200-01-32-S EN1SN,2SC 2"

4200-02-sEn2sn fERRULEs

Skive Stainless steel

4200-02-03-S EN2SN 3/16"4200-02-04-S EN2SN 1/4"4200-02-06-S EN2SN 3/8"4200-02-08-S EN2SN 1/2"4200-02-10-S EN2SN 5/8"4200-02-12-S EN2SN 3/4"4200-02-16-S EN2SN 1"4200-02-20-S EN2SN 11/4"4200-02-24-S EN2SN 11/2"4200-02-32-S EN2SN 2"

4200-15-sR7/R8

fERRULEs

Non-skive. Stainless steel

4200-15-03-S R7/R8 3/16"4200-15-04-S R7/R8 1/4"4200-15-06-S R7/R8 3/8"4200-15-08-S R7/R8 1/2"4200-15-12-S R7/R8 3/4"4200-15-16-S R7/R8 1"

4200-04-04-S EN2SN 1/4"4200-04-06-S EN2SN 3/8"4200-04-08-S EN2SN 1/2"4200-04-10-S EN2SN 5/8"4200-04-12-S EN2SN 3/4"4200-04-16-S EN2SN 1"

4200-04-sEn2sn fERRULEs

Non skive Stainless steel

4200-26-sfERRULEs

P.T.f.E. / TEfLOn smOOTH

Non-skive

4200-26-03-S P.T.F.E.smooth 3/16"4200-26-04-S P.T.F.E.smooth 1/4"4200-26-05-S P.T.F.E.smooth 5/16"4200-26-06-S P.T.F.E.smooth 3/8"4200-26-08-S P.T.F.E.smooth 1/2"4200-26-12-S P.T.F.E.smooth 3/4"4200-26-16-S P.T.F.E.smooth 1"

4200-30-04-S P.T.F.E.wrapped 1/4"4200-30-06-S P.T.F.E.wrapped 3/8"4200-30-08-S P.T.F.E.wrapped 1/2"4200-30-10-S P.T.F.E.wrapped 5/8"4200-30-12-S P.T.F.E.wrapped 3/4"4200-30-16-S P.T.F.E.wrapped 1"4200-30-20-S P.T.F.E.wrapped 11/4"4200-30-24-S P.T.F.E.wrapped 11/2"4200-30-32-S P.T.F.E.wrapped 2"

4200-30-sfERRULEs

P.T.f.E. / TEfLOn

Non-skive. Stainless steel

Partnumber Usewith HoseID






sTAinLEss sTEEL swAGE fiTTinGs PRODUCT GROUP 380


4203-2sG-THREADED 90° bEnD

sLiP-On nUT

60° cone sealing. Stainless steel

4204-2s G-THREADED 45° bEnD

sLiP-On nUT


4202-s G-THREADED sTRAiGHT

60° cone sealing Stainless steel

4201-04-04-2S G1/4" FS 1/4"4201-06-06-2S G3/8" FS 3/8"4201-08-06-2S G1/2" FS 3/8"4201-08-08-2S G1/2" FS 1/2"4201-10-10-S G5/8" FS 5/8"4201-12-08-2S G3/4" FS 1/2"4201-12-12-2S G3/4" FS 3/4"4201-16-12-2S G1" FS 3/4"4201-16-16-S G1" FS 1"4201-20-20-2S G11/4" FS 11/4"4201-24-24-S G11/2" FS 11/2"4201-32-32-2S G2" FS 2"

4201-2sG-THREADED sTRAiGHT

sLiP-On nUT


4202-04-03-S G1/4" M 3/16"4202-04-04-S G1/4" M 1/4"4202-04-06-S G1/4" M 3/8"4202-06-04-S G3/8" M 1/4"4202-06-06-S G3/8" M 3/8"4202-06-08-S G3/8" M 1/2"4202-08-06-S G1/2" M 3/8"4202-08-08-S G1/2" M 1/2"4202-08-12-S G1/2" M 3/4"4202-10-10-S G5/8" M 5/8"4202-12-12-S G3/4" M 3/4"4202-16-12-S G1" M 3/4"4202-16-16-S G1" M 1"4202-20-20-S G11/4" M 11/4"4202-24-24-S G11/2" M 11/2"4202-32-32-S G2" M 2"

4203-04-04-2S G1/4" 90°FS 1/4"4203-06-06-2S G3/8" 90°FS 3/8"4203-08-06-2S G1/2" 90°FS 3/8"4203-08-08-2S G1/2" 90°FS 1/2"4203-10-10-S G5/8" 90°FS 5/8"4203-12-12-S G3/4" 90°FS 3/4"4203-16-16-S G1" 90°FS 1"4203-20-20-2S G11/4" 90°FS 11/4"4203-24-24-S G11/2" 90°FS 11/2"4203-32-32-2S G2" 90°FS 2"

4204-04-04-2S G1/4" 45°FS 1/4"4204-06-06-2S G3/8" 45°FS 3/8"4204-08-08-2S G1/2" 45°FS 1/2"4204-12-12-2S G3/4" 45°FS 3/4"4204-16-16-S G1" 45°FS 1"4204-20-20-2S G11/4" 45°FS 11/4"4204-24-24-S G11/2" 45°FS 11/2"4204-32-32-2S G2" 45°FS 2"

Partnumber Thread Type HoseID






10

4220-12-04-S M12x1.5 6mm SKL 1/4"4220-14-04-S M14x1.5 8mm SKL 1/4"4220-16-06-S M16x1.5 10mm SKL 3/8"4220-18-06-S M18x1.5 12mm SKL 3/8"4220-22-08-S M22x1.5 15mm SKL 1/2"4220-26-10-S M26x1.5 18mm SKL 5/8"4220-30-12-S M30x2.0 22mm SKL 3/4"4220-36-16-S M36x2.0 28mm SKL 1"4220-45-20-S M45x2.0 35mm SKL 11/4"4220-52-24-S M52x2.0 42mm SKL 11/2"

4220-sm-THREADED sTRAiGHT

skL


4223-sm-THREADED sTRAiGHT

sks


4213-sUnifiED-THREADED sTRAiGHT

CRimPED nUT


4216-sUnifiED-THREADED 90° bEnD

CRimPED nUT


4217-sUnifiED-THREADED 45° bEnD

CRimPED nUT


4213-07-03-S 7/16"-20UNF JICFS 3/16"4213-07-04-S 7/16"-20UNF JICFS 1/4"4213-08-04-S 1/2"-20UNF JICFS 1/4"4213-09-04-S 9/16"-18UNF JICFS 1/4"4213-09-06-S 9/16"-18UNF JICFS 3/8"4213-12-06-S 3/4"-16UNF JICFS 3/8"4213-12-08-S 3/4"-16UNF JICFS 1/2"4213-14-08-S 7/8"-14UNF JICFS 1/2"4213-14-10-S 7/8"-14UNF JICFS 5/8"4213-17-10-S 11/16"-12UN JICFS 5/8"4213-17-12-S 11/16"-12UN JICFS 3/4"4213-21-16-S 15/16"-12UN JICFS 1"4213-26-20-S 15/8"-12UN JICFS 11/4"4213-30-24-S 17/8"-12UN JICFS 11/2"

4214-07-04-S 7/16"-20UNF JICM 1/4"4214-09-06-S 9/16"-18UNF JICM 3/8"4214-12-06-S 3/4"-16UNF JICM 3/8"4214-12-08-S 3/4"-16UNF JICM 1/2"4214-14-08-S 7/8"-14UNF JICM 1/2"4214-17-10-S 11/16"-12UN JICM 5/8"4214-17-12-S 11/16"-12UN JICM 3/4"4214-21-16-S 15/16"-12UN JICM 1"4214-30-20-S 17/8"-12UN JICM 11/4"

4216-07-04-S 7/16"-20UNF JIC90°FS 1/4"4216-08-04-S 1/2"-12UNF JIC90°FS 1/4"4216-09-04-S 9/16"-18UNF JIC90°FS 1/4"4216-09-06-S 9/16"-18UNF JIC90°FS 3/8"4216-12-08-S 3/4"-16UNF JIC90°FS 1/2"4216-14-08-S 7/8"-14UNF JIC90°FS 1/2"4216-17-10-S 11/16"-12UN JIC90°FS 5/8"4216-17-12-S 11/16"-12UN JIC90°FS 3/4"4216-21-16-S 15/16"-12UN JIC90°FS 1"4216-26-20-S 15/8"-12UN JIC90°FS 11/4"4216-30-24-S 17/8"-12UN JIC90°FS 11/2"

4217-07-04-S 7/16"-20UNF JIC45°FS 1/4"4217-08-04-S 1/2"-12UNF JIC45°FS 1/4"4217-09-04-S 9/16"-18UNF JIC45°FS 1/4"4217-09-06-S 9/16"-18UNF JIC45°FS 3/8"4217-12-08-S 3/4"-16UNF JIC45°FS 1/2"4217-14-08-S 7/8"-14UNF JIC45°FS 1/2"4217-17-12-S 11/16"-12UN JIC45°FS 3/4"4217-21-16-S 15/16"-12UN JIC45°FS 1"4217-26-20-S 15/8"-12UN JIC45°FS 11/4"

4223-14-04-S M14x1.5 6mm SKS 1/4"4223-16-04-S M16x1.5 8mm SKS 1/4"4223-18-04-S M18x1.5 10mm SKS 1/4"4223-18-06-S M18x1.5 10mm SKS 3/8"4223-20-06-S M20x1.5 12mm SKS 3/8"4223-24-08-S M24x1.5 16mm SKS 1/2"4223-30-10-S M30x1.5 20mm SKS 5/8"4223-36-12-S M36x2.0 25mm SKS 3/4"4223-36-16-S M36x2.0 25mm SKS 1"4223-42-16-S M42x2.0 30mm SKS 1"4223-52-20-S M52x2.0 38mm SKS 11/4"


4214-sUnifiED-THREADED sTRAiGHT

24° cone sealing Stainless steel




Partnumber Thread Pipe Type HoseID


sTAinLEss sTEEL swAGE fiTTinGs PRODUCT GROUP 380


4270-06-04-2S M12x1.5 6mm DKLO 1/4"4270-08-04-2S M14x1.5 8mm DKLO 1/4"4270-10-04-2S M16x1.5 10mm DKLO 1/4"4270-10-06-2S M16x1.5 10mm DKLO 3/8"4270-12-04-2S M18x1.5 12mm DKLO 1/4"4270-12-06-2S M18x1.5 12mm DKLO 3/8"4270-15-08-2S M22x1.5 15mm DKLO 1/2"4270-18-08-2S M26x1.5 18mm DKLO 1/2"4270-18-10-2S M26x1.5 18mm DKLO 5/8"4270-22-12-2S M30x2.0 22mm DKLO 3/4"4270-28-16-2S M36x2.0 28mm DKLO 1"4270-35-20-2S M45x2.0 35mm DKLO 11/4"4270-42-24-2S M52x2.0 42mm DKLO 11/2"

4270-2s m-THREADED sTRAiGHT

sLiP-On nUT

24° cone sealing with O-ring. Stainless steel

4244-ssAE fLAnGE 90° bEnD

Code 61 Stainless steel

4240-snPTf-THREADED sTRAiGHT

Coned thread and 60° cone sealing Stainless steel

4226-ssTAnD PiPE sTRAiGHT

Stainless steel

4227-ssTAnD PiPE 90° bEnD

Stainless steel

4226-06-03-S 6mm SP 3/16"4226-06-04-S 6mm SP 1/4"4226-08-03-S 8mm SP 3/16"4226-08-04-S 8mm SP 1/4"4226-10-04-S 10mm SP 1/4"4226-10-06-S 10mm SP 3/8"4226-12-06-S 12mm SP 3/8"4226-12-08-S 12mm SP 1/2"4226-14-06-S 14mm SP 3/8"4226-15-06-S 15mm SP 3/8"4226-15-08-S 15mm SP 1/2"4226-16-08-S 16mm SP 1/2"4226-18-08-S 18mm SP 1/2"4226-18-10-S 18mm SP 5/8"4226-20-10-S 20mm SP 5/8"4226-20-12-S 20mm SP 3/4"4226-22-12-S 22mm SP 3/4"4226-25-12-S 25mm SP 3/4"4226-28-16-S 28mm SP 1"4226-30-16-S 30mm SP 1"4226-35-20-S 35mm SP 11/4"4226-38-20-S 38mm SP 11/4"4226-42-24-S 42mm SP 11/2"

4227-06-04-S 6mm SP90° 1/4"4227-08-04-S 8mm SP90° 1/4"4227-10-04-S 10mm SP90° 1/4"4227-10-06-S 10mm SP90° 3/8"4227-12-06-S 12mm SP90° 3/8"4227-15-08-S 15mm SP90° 1/2"4227-18-08-S 18mm SP90° 1/2"

4240-04-04-S 1/4"-18NPTF M 1/4"4240-06-06-S 3/8"-18NPTF M 3/8"4240-08-08-S 1/2"-14NPTF M 1/2"4240-12-12-S 3/4"-14NPTF M 3/4"4240-16-16-S 1"-11½NPTF M 1"

4244-12-12-S 3/4" SAE390° 3/4"4244-16-16-S 1" SAE390° 3/4"4244-20-20-S 11/4" SAE390° 11/4"4244-24-24-S 11/2" SAE390° 11/2"

Partnumber PipeØ Type HoseID

Partnumber PipeØ Type HoseID


Partnumber Flangesize Type HoseID




10

4271-2s m-THREADED 90° bEnD sLiP-On nUT

24° cone sealing with O-ring stainless steel

4272-2sm-THREADED 45° bEnD sLiP-On nUT

24° cone sealing with O-ring Stainless steel

4273-2sm-THREADED sTRAiGHT

sLiP-On nUT

24° cone sealing with O-ring. Stainless steel





4271-06-04-2S M12x1.5 6mm DKLO90° 1/4"4271-08-04-2S M14x1.5 8mm DKLO90° 1/4"4271-10-04-2S M16x1.5 10mm DKLO90° 1/4"4271-10-06-2S M16x1.5 10mm DKLO90° 3/8"4271-12-06-2S M18x1.5 12mm DKLO90° 3/8"4271-15-08-2S M22x1.5 15mm DKLO90° 1/2"4271-18-08-2S M26x1.5 18mm DKLO90° 1/2"4271-18-10-2S M26x1.5 18mm DKLO90° 5/8"4271-22-12-2S M30x2.0 22mm DKLO90° 3/4"4271-28-16-2S M36x2.0 28mm DKLO90° 1"4271-35-20-2S M45x2.0 35mm DKLO90°11/4"4271-42-24-2S M52x2.0 42mm DKLO90°11/2"

4272-08-04-2S M14x1.5 8mm DKLO45° 1/4"4272-12-06-2S M18x1.5 12mm DKLO45° 3/8"4272-15-08-2S M22x1.5 15mm DKLO45° 1/2"4272-18-10-2S M26x1.5 18mm DKLO45° 5/8"4272-22-12-2S M30x2.0 22mm DKLO45° 3/4"4272-28-16-2S M36x2.0 28mm DKLO45° 1"4272-35-20-2S M45x2.0 35mm DKLO45°11/4"

4273-06-04-2S M14x1.5 6mm DKSO 1/4"4273-08-04-2S M16x1.5 8mm DKSO 1/4"4273-10-04-2S M18x1.5 10mm DKSO 1/4"4273-10-06-2S M18x1.5 10mm DKSO 3/8"4273-12-04-2S M20x1.5 12mm DKSO 1/4"4273-12-06-2S M20x1.5 12mm DKSO 3/8"4273-14-06-2S M22x1.5 14mm DKSO 3/8"4273-16-06-2S M24x1.5 16mm DKSO 3/8"4273-16-08-2S M24x1.5 16mm DKSO 1/2"4273-20-10-2S M30x2.0 20mm DKSO 5/8"4273-20-12-2S M30x2.0 20mm DKSO 3/4"4273-25-12-2S M36x2.0 25mm DKSO 3/4"4273-25-16-2S M36x2.0 25mm DKSO 1"4273-30-16-2S M42x2.0 30mm DKSO 1"4273-38-20-2S M52x2.0 38mm DKSO 11/4"

4274-08-04-2S M16x1.5 8mm DKSO90° 1/4"4274-10-04-2S M18x1.5 10mm DKSO90° 1/4"4274-10-06-2S M18x1.5 10mm DKSO90° 3/8"4274-12-06-2S M20x1.5 12mm DKSO90° 3/8"4274-14-06-2S M22x1.5 14mm DKSO90° 3/8"4274-16-08-2S M24x1.5 16mm DKSO90° 1/2"4274-20-10-2S M30x2.0 20mm DKSO90° 5/8"4274-20-12-2S M30x2.0 20mm DKSO90° 3/4"4274-25-12-2S M36x2.0 25mm DKSO90° 3/4"4274-25-16-2S M36x2.0 25mm DKSO90° 1"4274-30-16-2S M42x2.0 30mm DKSO90° 1"4274-38-20-2S M52x2.0 38mm DKSO90°11/4"

4275-10-04-2S M18x1.5 10mm DKSO45° 1/4"4275-12-06-2S M20x1.5 12mm DKSO45° 3/8"4275-14-06-2S M22x1.5 14mm DKSO45° 3/8"4275-16-08-2S M24x1.5 16mm DKSO45° 1/2"4275-20-10-2S M30x2.0 20mm DKSO45° 5/8"4275-25-12-2S M36x2.0 25mm DKSO45° 3/4"4275-30-16-2S M42x2.0 30mm DKSO45° 1"4275-38-20-2S M52x2.0 38mm DKSO45°11/4"






inDUsTRiAL sTAinLEss sTEEL fiTTinGs PRODUCT GROUP 501


5001-01CLAw COUPLinG

For hose

Partnumber Type HoseID

5001-01-06 Clawcoupling 3/8"5001-01-08 Clawcoupling 1/2"5001-01-12 Clawcoupling 3/4"5001-01-16 Clawcoupling 1"

5001-02CLAw COUPLinG

mALE THREAD

Partnumber Type Thread

5001-02-06 Clawcoupling 3/8"M5001-02-08 Clawcoupling 1/2"M5001-02-12 Clawcoupling 3/4"M5001-02-16 Clawcoupling 1"M

5001-03CLAw COUPLinG fEmALE THREAD


5001-03-06 Clawcoupling 3/8"F5001-03-08 Clawcoupling 1/2"F5001-03-12 Clawcoupling 3/4"F5001-03-16 Clawcoupling 1"F

5001-04sEAL

For standard claw couplings

Partnumber Description

5001-04-00 Sealforair,black

PRODUCT GROUP 570 sTAinLEss sTEEL ACCEssORiEs PiPE CLAmPs


10

5396-3inLinE wELD PLATE

Standard series Stainless steel

5396-71-01 H TP 15396-72-01 H TP 25396-73-01 H TP 35396-74-01 H TP 45396-75-01 H TP 55396-76-01 H TP 65396-77-01 H TP 7

5396-0nORmAL wELD PLATE


5396-2DOUbLE wELD PLATE


5396-31-10 H RSP 1 105396-32-10 H RSP 2 105396-33-10 H RSP 3 105396-34-10 H RSP 4 105396-35-05 H RSP 5 5

5398-00-05 Wearrail,2meter14x28mm5398-00-02 MountingnutM65393-00-03 O-ringforFM

5398wEAR RAiL wiTH ACCEssORiEs


5396-01-01 H SP 15396-02-01 H SP 25396-03-01 H SP 35396-04-01 H SP 45396-05-01 H SP 55396-06-01 H SP 65396-07-01 H SP 7

5396-1wELD PLATE LOnG


5396-12-01 HSP-Long 25396-13-01 HSP-Long 35396-14-01 HSP-Long 45396-15-01 HSP-Long 55396-16-01 HSP-Long 6

5396-22-02 H SPD 25396-23-02 H SPD 35396-24-02 H SPD 45396-25-02 H SPD 5

Partnumber Descr. Group



Partnumber Descr. Group No.clamps

Partnumber Description

5396-7sECTiOnAL PLATE



5397-0CAP HEAD bOLT

fOR wAsHER

Standard series, stainless steel

Partnumber Descr. Thread Length Group

5397-01-22 H IS M6 22 1 & 25397-03-28 H IS M6 28 35397-04-30 H IS M6 30 45397-05-40 H IS M6 40 55397-06-50 H IS M6 50 65397-07-60 H IS M6 60 75397-00-01 Washer M6

5397-3HExAGOn bOLT

fOR sECTiOnAL PLATE


5397-2sTACkinG bOLT




5397-31-30 HSKB M6 30 1&25397-33-35 HSKB M6 35 35397-34-40 HSKB M6 40 45397-35-50 HSKB M6 50 55397-36-60 HSKB M6 60 65397-37-70 HSKB M6 70 7

5392-21-22 HPBS M6 22 1&25392-23-28 HPBS M6 27 35392-24-30 HPBS M6 29 45392-25-40 HPBS M6 39 55392-26-50 HPBS M6 49 65393-00-04 Tabwasher

sTAinLEss sTEEL HOsE CLAmPs ETC. PRODUCT GROUP 510


5563HOsE CLAmP

Stainless steel

5563-08-14 8-14mm 9mm5563-11-17 11-17mm 9mm5563-13-20 13-20mm 9mm5563-15-24 15-24mm 12mm5563-19-28 19-28mm 12mm5563-22-32 22-32mm 12mm5563-26-38 26-38mm 12mm5563-32-44 32-44mm 12mm5563-38-50 38-50mm 12mm5563-44-56 44-56mm 12mm5563-50-65 50-65mm 12mm5563-58-75 58-75mm 12mm5563-68-85 68-85mm 12mm5563-77-95 77-95mm 12mm5563-91-12 87-112mm 12mm5563-91-38 104-138mm 12mm5563-91-65 130-165mm 12mm5563-91-80 150-180mm 12mm5563-92-05 175-205mm 12mm

5561-10HOsE CLAmP mini

Stainless, AISI 304, Band width 12 mm

5561-10-08 Miniclamp 8,5mm 12mm5561-10-09 Miniclamp 9,5mm 12mm5561-10-10 Miniclamp 11mm 12mm5561-10-11 Miniclamp 12mm 12mm5561-10-12 Miniclamp 13mm 12mm5561-10-13 Miniclamp 14mm 12mm5561-10-14 Miniclamp 15mm 12mm5561-10-15 Miniclamp 16mm 12mm5561-10-16 Miniclamp 17mm 12mm5561-10-17 Miniclamp 18mm 12mm

5565-20HOsE CLAmP

Stainless, AISI 316, PC 20-1, simple Band width 20 mm

5564-08-16 8-16mm 9mm5564-12-22 12-22mm 9mm5564-16-25 16-25mm 12mm5564-23-35 23-35mm 12mm5564-25-40 25-40mm 12mm5564-30-45 30-45mm 12mm5564-32-50 32-50mm 12mm5564-40-60 40-60mm 12mm5564-50-70 50-70mm 12mm5564-60-80 60-80mm 12mm5564-70-90 70-90mm 12mm5564-01-00 80-100mm 12mm5564-01-10 90-110mm 12mm5564-01-20 100-120mm 12mm5564-01-30 110-130mm 12mm5564-01-40 120-140mm 12mm5564-01-50 130-150mm 12mm5564-01-60 140-160mm 12mm5564-01-70 150-170mm 12mm5564-01-80 160-180mm 12mm

5564

Hose clampAccording to DIN 3017

Stainless steel

5566-20HOsE CLAmP

Stainless, AISI 316, PC 20-2, double Band width 20 mm

5565-20-40 PC20-1 35-40mm 20mm5565-20-45 PC20-1 39-45mm 20mm5565-20-50 PC20-1 44-50mm 20mm5565-20-55 PC20-1 49-55mm 20mm5565-20-60 PC20-1 54-60mm 20mm5565-20-65 PC20-1 59-65mm 20mm5565-20-70 PC20-1 64-70mm 20mm

5566-20-50 PC20-2 40-50mm 20mm5566-20-55 PC20-2 45-55mm 20mm5566-20-60 PC20-2 50-60mm 20mm5566-20-65 PC20-2 55-65mm 20mm5566-20-70 PC20-2 60-70mm 20mm5566-20-75 PC20-2 65-75mm 20mm5566-20-80 PC20-2 70-80mm 20mm5566-20-85 PC20-2 75-85mm 20mm5566-20-90 PC20-2 80-90mm 20mm5566-20-95 PC20-2 85-95mm 20mm5566-21-00 PC20-2 90-100mm 20mm5566-21-05 PC20-2 95-105mm 20mm5566-21-10 PC20-2 100-110mm 20mm5566-21-15 PC20-2 105-115mm 20mm5566-21-20 PC20-2 110-120mm 20mm5566-21-25 PC20-2 115-125mm 20mm5566-21-30 PC20-2 120-130mm 20mm5566-21-35 PC20-2 125-135mm 20mm5566-21-40 PC20-2 130-140mm 20mm5566-21-45 PC20-2 135-145mm 20mm5566-21-50 PC20-2 140-150mm 20mm5566-21-60 PC20-2 150-160mm 20mm

Partnumber Description Maxdim. Bandwidth

Partnumber Dimensionrange Bandwidth

Partnumber Description Dim.range Bandwidth

Partnumber Dimensionrange Bandwidth

Partnumber Description Dim.range Bandwidth

PRODUCT GROUP 510 sTAinLEss sTEEL HOsE CLAmPs ETC.


10

5601-03-02 Rubbersteelbondedwasher G1/8"5601-03-04 Rubbersteelbondedwasher G1/4"5601-03-06 Rubbersteelbondedwasher G3/8"5601-03-08 Rubbersteelbondedwasher G1/2"5601-03-10 Rubbersteelbondedwasher G5/8"5601-03-12 Rubbersteelbondedwasher G3/4"5601-03-16 Rubbersteelbondedwasher G1"5601-03-20 RubbersteelbondedwasherG11/4"5601-03-24 RubbersteelbondedwasherG11/2"5601-03-32 Rubbersteelbondedwasher G2"

5601-04-04 Rubbersteelbondedwasher M45601-04-05 Rubbersteelbondedwasher M55601-04-06 Rubbersteelbondedwasher M65601-04-08 Rubbersteelbondedwasher M85601-04-10 Rubbersteelbondedwasher M105601-04-12 Rubbersteelbondedwasher M125601-04-14 Rubbersteelbondedwasher M145601-04-16 Rubbersteelbondedwasher M165601-04-18 Rubbersteelbondedwasher M185601-04-20 Rubbersteelbondedwasher M205601-04-22 Rubbersteelbondedwasher M225601-04-24 Rubbersteelbondedwasher M24

5601-03RUbbER sTEEL bOnDED wAsHER

Stainless steel

5601-04RUbbER sTEEL bOnDED wAsHER

Stainless steel

Partno. Description Forthread Partno. Description Forthread

sTAinLEss sTEEL QUiCk RELEAsE fiTTinGs PRODUCT GROUP 520


5558-94fAsTER Hnv/inOx isO b

Viton seal. Stainless steel

Dim. Male Female PNMPa Thread Flowl/min Length

1/4" 5558-95-04 5558-96-04 35.0 G1/4"F 12 70.5mm 3/8" 5558-95-06 5558-96-06 30.0 G3/8"F 30 82.5mm 1/2" 5558-95-08 5558-96-08 30.0 G1/2"F 50 92.5mm 3/4" 5558-95-12 5558-96-12 25.0 G3/4"F 110 111.0mm 1" 5558-95-16 5558-96-16 23.0 G1"F 160 133.0mm

5TxxTEmA T sERiEs

Viton seal. Stainless steel

Dim. Male Temadescr. Female Temadescr. PNMPa Thread Flowl/min Length

1/4" 5T2520RV 2520RV 5T2510RV 2510RV 45.0 G1/4"F 19 81.0mm 3/8" 5T3820RV 3820RV 5T3810RV 3810RV 35.0 G3/8"F 40 74.0mm 1/2" 5T5020RV 5020RV 5T5010RV 5010RV 30.0 G1/2"F 85 82.0mm 3/4" 5T7520RV 7520RV 5T7510RV 7510RV 28.0 G3/4"F 160 91.0mm 1" 5T10020RV 10020RV 5T10010RV 10010RV 25.0 G1"F 225 108.0mm

PRODUCT GROUP 620 sTAinLEss sTEEL CUTTinG RinG fiTTinGs


10

AssEmbLy insTRUCTiOns

1. Cutthetubeata90degreeangle(donotuseroller,typetubecutters),removeallinternalandexternalburrs.

2. Oilthe24°cone,thethreadofthefittingbody,thecuttingringandthenut.

a.Forcarbonsteelfittings,usemineraloil.

b.Forstainlesssteelfittings,useaspecialhigh-performancelubricant.

3. Fitthenutandthecuttingringonthetubesasshown.Thelargerdiameterofthecuttingringmustfacethenut.

4. Insertthetubeonthe24°coneuntilitcomesintocontactwiththestop.Tightenthenutbyhanduntilthecuttingringrestfirmlyonthenut.Thentightenthenutwithawrenchuntilthecuttingedgeoftheringisincontactwiththetubeandpreventsrotationifthis.

5. Holdingthetubeagainstitsstopandmakingsureitdoesnotrotate,tightenthenutby¾ofaturn.Thisway,thecuttingringcutintotheouterpartofthetubeforthenecessarydepthandraisesanedgeinfrontofitscuttingedgewhilethesecondcuttingedgeclinchesthetubeatthesametime.

6. Loosenthenutandcheckthatthereisaclearlyraisededgeallroundthetube.Theedgemustcover80%ofthefrontofthecuttingring.Thischeckisperemptoryforthesafetyofallconcerned!!Iftheraisededgeisnotsatisfactory,pre-assemblymustberepeated.Thecuttingringcanrotateonthetube.

7. Reassemblethenutonthefittinguntilacertainresistanceisencounteredandthentightenforafurther1/4turn.

A. Finalinstallationofworkspre-installedfittings:Screwthenutbyhandashardasyoucan,thenthenutshouldbetightenedapproximately1/2–3/4turnmore.Thisinformationapplytoallourpre-installedfittings.

B. Allthepre-assemblyofstainlesssteelfittingsmustbeperformedwithapre-assemblytool(blocksormachines).

sTAinLEss sTEEL CUTTinG RinG fiTTinGs PRODUCT GROUP 620


2603GE – Gb

sTRAiGHT fiTTinG – G m

Cutting edge. ISO 1179-4. Stainless steel

2803GE – Gb



Partnumber Type Pipesize Thread Partnumber Type Pipesize Thread

2603-06-02 GE6L 6mm G1/8"M2603-06-04 GE6L 6mm G1/4"M2603-06-06 GE6L 6mm G3/8"M2603-06-08 GE6L 6mm G1/2"M2603-08-02 GE8L 8mm G1/8"M2603-08-04 GE8L 8mm G1/4"M2603-08-06 GE8L 8mm G3/8"M2603-08-08 GE8L 8mm G1/2"M2603-10-04 GE10L 10mm G1/4"M2603-10-06 GE10L 10mm G3/8"M2603-10-08 GE10L 10mm G1/2"M2603-12-04 GE12L 12mm G1/4"M2603-12-06 GE12L 12mm G3/8"M2603-12-08 GE12L 12mm G1/2"M2603-12-12 GE12L 12mm G3/4"M2603-15-06 GE15L 15mm G3/8"M2603-15-08 GE15L 15mm G1/2"M2603-15-12 GE15L 15mm G3/4"M2603-18-06 GE18L 18mm G3/8"M2603-18-08 GE18L 18mm G1/2"M2603-18-12 GE18L 18mm G3/4"M2603-22-08 GE22L 22mm G1/2"M2603-22-12 GE22L 22mm G3/4"M2603-22-16 GE22L 22mm G1"M2603-28-12 GE28L 28mm G3/4"M2603-28-16 GE28L 28mm G1"M2603-28-20 GE28L 28mm G11/4"M2603-35-16 GE35L 35mm G1"M2603-35-20 GE35L 35mm G11/4"M2603-35-24 GE35L 35mm G11/2"M2603-42-20 GE42L 42mm G11/4"M2603-42-24 GE42L 42mm G11/2"M

2803-06-04 GE6S 6mm G1/4"M2803-06-06 GE6S 6mm G3/8"M2803-06-08 GE6S 6mm G1/2"M2803-08-02 GE8S 8mm G1/8"M2803-08-04 GE8S 8mm G1/4"M2803-08-06 GE8S 8mm G3/8"M2803-08-08 GE8S 8mm G1/2"M2803-10-04 GE10S 10mm G1/4"M2803-10-06 GE10S 10mm G3/8"M2803-10-08 GE10S 10mm G1/2"M2803-12-04 GE12S 12mm G1/4"M2803-12-06 GE12S 12mm G3/8"M2803-12-08 GE12S 12mm G1/2"M2803-14-06 GE14S 14mm G3/8"M2803-14-08 GE14S 14mm G1/2"M2803-16-06 GE16S 16mm G3/8"M2803-16-08 GE16S 16mm G1/2"M2803-16-12 GE16S 16mm G3/4"M2803-20-08 GE20S 20mm G1/2"M2803-20-12 GE20S 20mm G3/4"M2803-20-16 GE20S 20mm G1"M2803-25-12 GE25S 25mm G3/4"M2803-25-16 GE25S 25mm G1"M2803-25-20 GE25S 25mm G11/4"M2803-30-16 GE30S 30mm G1"M2803-30-20 GE30S 30mm G11/4"M2803-30-24 GE30S 30mm G11/2"M2803-38-16 GE38S 38mm G1"M2803-38-20 GE38S 38mm G11/4"M2803-38-24 GE38S 38mm G11/2"M

2606GE – mb

sTRAiGHT fiTTinG – m m


Partnumber Type Pipesize Thread

2606-06-10 GE6L 6mm M10x1.02606-08-12 GE8L 8mm M12x1.52606-10-14 GE10L 10mm M14x1.52606-12-14 GE12L 12mm M14x1.52606-12-16 GE12L 12mm M16x1.52606-15-18 GE15L 15mm M18x1.52606-18-22 GE18L 18mm M22x1.52606-22-26 GE22L 22mm M26x1.52606-28-33 GE28L 28mm M33x2.02606-35-42 GE35L 35mm M42x2.02606-42-48 GE42L 42mm M48x2.0

2806GE – mb

sTRAiGHT fiTTinG – m m



2806-06-12 GE6S 6mm M12x1.52806-08-14 GE8S 8mm M14x1.52806-10-16 GE10S 10mm M16x1.52806-12-18 GE12S 12mm M18x1.52806-14-20 GE14S 14mm M20x1.52806-16-22 GE16S 16mm M22x1.52806-25-33 GE25S 25mm M33x2.02806-30-42 GE30S 30mm M42x2.02806-38-48 GE38S 38mm M48x2.0



10

2607GE – nPT

sTRAiGHT fiTTinG – nPT mCone sealing. Stainless steel

ANSI/ASME B1.20.1-1983


2607-06-02 GE6L 6mm 1/8"-27NPT2607-06-04 GE6L 6mm 1/4"-18NPT2607-06-06 GE6L 6mm 3/8"-18NPT2607-06-08 GE6L 6mm 1/2"-14NPT2607-08-02 GE8L 8mm 1/8"-27NPT2607-08-04 GE8L 8mm 1/4"-18NPT2607-08-06 GE8L 8mm 3/8"-18NPT2607-08-08 GE8L 8mm 1/2"-14NPT2607-10-02 GE10L 10mm 1/8"-27NPT2607-10-04 GE10L 10mm 1/4"-18NPT2607-10-06 GE10L 10mm 3/8"-18NPT2607-10-08 GE10L 10mm 1/2"-14NPT2607-12-04 GE12L 12mm 1/4"-18NPT2607-12-06 GE12L 12mm 3/8"-18NPT2607-12-08 GE12L 12mm 3/8"-18NPT2607-12-12 GE12L 12mm 3/4"-14NPT2607-15-08 GE15L 15mm 1/2"-14NPT2607-15-12 GE15L 15mm 3/4"-14NPT2607-18-08 GE18L 18mm 1/2"-14NPT2607-22-08 GE22L 22mm 1/2"-14NPT2607-22-12 GE22L 22mm 3/4"-14NPT2607-28-16 GE28L 28mm 1"-11½NPT2607-35-20 GE35L 35mm 11/4"-11½NPT2607-42-24 GE42L 42mm 11/2"-11½NPT

2807-06-04 GE6S 6mm 1/4"-18NPT2807-06-06 GE6S 6mm 3/8"-18NPT2807-06-08 GE6S 6mm 1/2"-14NPT2807-08-04 GE8S 8mm 1/4"-18NPT2807-08-06 GE8S 8mm 3/8"-18NPT2807-08-08 GE8S 8mm 1/2"-14NPT2807-10-04 GE10S 10mm 1/4"-18NPT2807-10-06 GE10S 10mm 3/8"-18NPT2807-10-08 GE10S 10mm 1/2"-14NPT2807-12-04 GE12S 12mm 1/4"-18NPT2807-12-06 GE12S 12mm 3/8"-18NPT2807-12-08 GE12S 12mm 1/2"-14NPT2807-14-08 GE14S 14mm 1/2"-14NPT2807-16-06 GE16S 16mm 3/8"-18NPT2807-16-08 GE16S 16mm 1/2"-14NPT2807-16-12 GE16S 16mm 3/4"-14NPT2807-20-08 GE20S 20mm 1/2"-14NPT2807-20-12 GE20S 20mm 3/4"-14NPT2807-25-12 GE25S 25mm 3/4"-14NPT2807-25-16 GE25S 25mm 1"-11½NPT2807-30-16 GE30S 30mm 1"-11½NPT2807-30-20 GE30S 30mm 11/4"-11½NPT2807-38-20 GE38S 38mm 11/4"-11½NPT2807-38-24 GE38S 38mm 11/2"-11½NPT

2609GE – G/ED


ED sealing. Perbunan. Stainless steel


2609-08-04 GE8L 8mm G1/4"M2609-10-04 GE10L 10mm G1/4"M2609-22-12 GE22L 22mm G3/4"M2609-22-16 GE22L 22mm G1"M2609-28-20 GE28L 28mm G11/4"M2609-42-24 GE42L 42mm G11/2"M

2809-10-04 GE10S 10mm G1/4"M2809-10-08 GE10S 10mm G1/2"M2809-12-04 GE12S 12mm G1/4"M2809-12-06 GE12S 12mm G3/8"M2809-12-08 GE12S 12mm G1/2"M2809-16-08 GE16S 16mm G1/2"M2809-20-08 GE20S 20mm G1/2"M2809-20-12 GE20S 20mm G3/4"M2809-25-16 GE25S 25mm G1"M2809-30-20 GE30S 30mm G11/4"M

2611wE – R/C

90° ELbOw fiTTinG – R m

Cone sealing. C DIN 3852. Stainless steel


2611-06-02 WE6L 6mm R1/8"M2611-06-04 WE6L 6mm R1/4"M2611-08-02 WE8L 8mm R1/8"M2611-08-04 WE8L 8mm R1/4"M2611-08-06 WE8L 8mm R3/8"M2611-08-08 WE8L 8mm R1/2"M2611-10-02 WE10L 10mm R1/8"M2611-10-04 WE10L 10mm R1/4"M2611-10-06 WE10L 10mm R3/8"M2611-10-08 WE10L 10mm R1/2"M2611-12-02 WE12L 12mm R1/8"M2611-12-04 WE12L 12mm R1/4"M2611-12-06 WE12L 12mm R3/8"M2611-12-08 WE12L 12mm R1/2"M2611-15-06 WE15L 15mm R3/8"M2611-15-08 WE15L 15mm R1/2"M2611-18-08 WE18L 18mm R1/2"M

2811-06-04 WE6S 6mm R1/4"M2811-08-04 WE8S 8mm R1/4"M2811-08-06 WE8S 8mm R3/8"M2811-08-08 WE8S 8mm R1/2"M2811-10-04 WE10S 10mm R1/4"M2811-10-06 WE10S 10mm R3/8"M2811-10-08 WE10S 10mm R1/2"M2811-12-06 WE12S 12mm R3/8"M2811-12-08 WE12S 12mm R1/2"M2811-14-08 WE14S 14mm R1/2"M2811-16-08 WE16S 16mm R1/2"M



2613wE – Gb

90° ELbOw fiTTinG – G m

Cutting edge. B DIN 3852. Stainless steel


2613-22-12 WE22L 22mm G3/4"M2613-28-16 WE28L 28mm G1"M2613-35-20 WE35L 35mm G11/4"M2613-42-24 WE42L 42mm G11/2"M

2813-20-12 WE20S 20mm G3/4"M2813-25-16 WE25S 25mm G1"M2813-30-20 WE30S 30mm G11/4"M2813-38-24 WE38S 38mm G11/2"M

2617wE – nPT

90° ELbOw fiTTinG nPTCone sealing. ANSI/ASME B1.20.1-1983

Stainless steel.


2617-06-02 WE6L 6mm 1/8"-27NPT2617-08-04 WE8L 8mm 1/4"-18NPT2617-10-04 WE10L 10mm 1/4"-18NPT2617-12-04 WE12L 12mm 1/4"-18NPT2617-12-06 WE12L 12mm 3/8"-18NPT2617-12-08 WE12L 12mm 1/2"-14NPT2617-15-08 WE15L 15mm 1/2"-14NPT2617-18-08 WE18L 18mm 1/2"-14NPT2617-22-12 WE22L 22mm 3/4"-14NPT2617-28-16 WE28L 28mm 1"-11½NPT2617-35-20 WE35L 35mm 11/4"-11½NPT2617-42-24 WE42L 42mm 11/2"-11½NPT

2817-06-04 WE6S 6mm 1/4"-18NPT2817-10-06 WE10S 10mm 3/8"-18NPT2817-12-06 WE12S 12mm 3/8"-18NPT2817-12-08 WE12S 12mm 1/2"-14NPT2817-14-08 WE14S 14mm 1/2"-14NPT2817-16-08 WE16S 16mm 1/2"-14NPT2817-20-12 WE20S 20mm 3/4"-14NPT2817-25-16 WE25S 25mm 1"-11½NPT2817-30-20 WE30S 30mm 11/4"-11½NPT2817-38-24 WE38S 38mm 11/2"-11½NPT

2621TE – R/C

T-fiTTinG – R m

Cone sealing. C DIN 3852. Stainless steel


2621-06-02 TE6L 6mm R1/8"M2621-08-04 TE8L 8mm R1/4"M2621-10-04 TE10L 10mm R1/4"M2621-12-06 TE12L 12mm R3/8"M2621-15-08 TE15L 15mm R1/2"M2621-18-08 TE18L 18mm R1/2"M

2821-06-04 TE6S 6mm R1/4"M2821-08-04 TE8S 8mm R1/4"M2821-10-06 TE10S 10mm R3/8"M2821-12-06 TE12S 12mm R3/8"M2821-14-08 TE14S 14mm R1/2"M2821-16-08 TE16S 16mm R1/2"M

2623TE – Gb

T-fiTTinG – G m

Cutting edge. B DIN 3852. Stainless steel


2623-22-12 TE22L 22mm G3/4"M2623-28-16 TE28L 28mm G1"M2623-35-20 TE35L 35mm G11/4"M2623-42-24 TE42L 42mm G11/2"M

2823-20-12 TE20S 20mm G3/4"M2823-25-16 TE25S 25mm G1"M2823-30-20 TE30S 30mm G11/4"M2823-38-24 TE38S 38mm G11/2"M



10

2641G

sTRAiGHT jOinT fiTTinG

Stainless steel

Partnumber Type Pipesize

2641-06-06 G6L 6mm2641-08-08 G8L 8mm2641-10-10 G10L 10mm2641-12-12 G12L 12mm2641-15-15 G15L 15mm2641-18-18 G18L 18mm2641-22-22 G22L 22mm2641-28-28 G28L 28mm2641-35-35 G35L 35mm2641-42-42 G42L 42mm

2841-06-06 G6S 6mm2841-08-08 G8S 8mm2841-10-10 G10S 10mm2841-12-12 G12S 12mm2841-14-14 G14S 14mm2841-16-16 G16S 16mm2841-20-20 G20S 20mm2841-25-25 G25S 25mm2841-30-30 G30S 30mm2841-38-38 G38S 38mm

2642w

ELbOw jOinT fiTTinG

Stainless steel

2643T

T-jOinT fiTTinG

Stainless steel

2644k

CROss jOinT fiTTinG

Stainless steel




2642-06-06 W6L 6mm2642-08-08 W8L 8mm2642-10-10 W10L 10mm2642-12-12 W12L 12mm2642-15-15 W15L 15mm2642-18-18 W18L 18mm2642-22-22 W22L 22mm2642-28-28 W28L 28mm2642-35-35 W35L 35mm2642-42-42 W42L 42mm

2842-06-06 W6S 6mm2842-08-08 W8S 8mm2842-10-10 W10S 10mm2842-12-12 W12S 12mm2842-14-14 W14S 14mm2842-16-16 W16S 16mm2842-20-20 W20S 20mm2842-25-25 W25S 25mm2842-30-30 W30S 30mm2842-38-38 W38S 38mm

2643-06-06 T6L 6mm2643-08-08 T8L 8mm2643-10-10 T10L 10mm2643-12-12 T12L 12mm2643-15-15 T15L 15mm2643-18-18 T18L 18mm2643-22-22 T22L 22mm2643-28-28 T28L 28mm2643-35-35 T35L 35mm2643-42-42 T42L 42mm

2843-06-06 T6S 6mm2843-08-08 T8S 8mm2843-10-10 T10S 10mm2843-12-12 T12S 12mm2843-14-14 T14S 14mm2843-16-16 T16S 16mm2843-20-20 T20S 20mm2843-25-25 T25S 25mm2843-30-30 T30S 30mm2843-38-38 T38S 38mm

2644-06-06 K6L 6mm2644-08-08 K8L 8mm2644-10-10 K10L 10mm2644-12-12 K12L 12mm2644-15-15 K15L 15mm2644-18-18 K18L 18mm2644-22-22 K22L 22mm2644-28-28 K28L 28mm2644-35-35 K35L 35mm2644-42-42 K42L 42mm

2844-06-06 K6S 6mm2844-08-08 K8S 8mm2844-10-10 K10S 10mm2844-12-12 K12S 12mm2844-14-14 K14S 14mm2844-16-16 K16S 16mm2844-20-20 K20S 20mm2844-25-25 K25S 25mm2844-30-30 K30S 30mm2844-38-38 K38S 38mm



2645sv

bULkHEAD COnnECTiOn

Stainless steel

2647As

sTRAiGHT wELDinG bOss

Stainless steel

Partnumber Type Pipesize Bulkthread Partnumber Type Pipesize ØBody

2645-06-06 SV6L 6mm M12x1.52645-08-08 SV8L 8mm M14x1.52645-10-10 SV10L 10mm M16x1.52645-12-12 SV12L 12mm M18x1.52645-15-15 SV15L 15mm M22x1.52645-18-18 SV18L 18mm M26x1.52645-22-22 SV22L 22mm M30x2.02645-28-28 SV28L 28mm M36x2.02645-35-35 SV35L 35mm M45x2.02645-42-42 SV42L 42mm M52x2.0

2845-06-06 SV6S 6mm M14x1.52845-08-08 SV8S 8mm M16x1.52845-10-10 SV10S 10mm M18x1.52845-12-12 SV12S 12mm M20x1.52845-14-14 SV14S 14mm M22x1.52845-16-16 SV16S 16mm M24x1.52845-20-20 SV20S 20mm M30x2.02845-25-25 SV25S 25mm M36x2.02845-30-30 SV30S 30mm M42x2.02845-38-38 SV38S 38mm M52x2.0

2647-06-06 AS6L 6mm 10mm2647-08-08 AS8L 8mm 12mm2647-10-10 AS10L 10mm 14mm2647-12-12 AS12L 12mm 16mm2647-15-15 AS15L 15mm 19mm2647-18-18 AS18L 18mm 22mm2647-22-22 AS22L 22mm 27mm2647-28-28 AS28L 28mm 32mm2647-35-35 AS35L 35mm 40mm2647-42-42 AS42L 42mm 46mm

2847-06-06 AS6S 6mm 11mm2847-08-08 AS8S 8mm 13mm2847-10-10 AS10S 10mm 15mm2847-12-12 AS12S 12mm 17mm2847-14-14 AS14S 14mm 19mm2847-16-16 AS16S 16mm 21mm2847-20-20 AS20S 20mm 26mm2847-25-25 AS25S 25mm 31mm2847-30-30 AS30S 30mm 36mm2847-38-38 AS38S 38mm 44mm

2646wsv ELbOw bULkHEAD

COnnECTiOn

Stainless steel

Partnumber Type Pipesize Bulkthread

2646-06-06 WSV6L 6mm M12x1.52646-08-08 WSV8L 8mm M14x1.52646-10-10 WSV10L 10mm M16x1.52646-12-12 WSV12L 12mm M18x1.52646-15-15 WSV15L 15mm M22x1.52646-18-18 WSV18L 18mm M26x1.52646-22-22 WSV22L 22mm M30x2.02646-28-28 WSV28L 28mm M36x2.02646-35-35 WSV35L 35mm M45x2.02646-42-42 WSV42L 42mm M52x2.0

2846-06-06 WSV6S 6mm M14x1.52846-08-08 WSV8S 8mm M16x1.52846-10-10 WSV10S 10mm M18x1.52846-12-12 WSV12S 12mm M20x1.52846-14-14 WSV14S 14mm M22x1.52846-16-16 WSV16S 16mm M24x1.52846-20-20 WSV20S 20mm M30x2.02846-25-25 WSV25S 25mm M36x2.02846-30-30 WSV30S 30mm M42x2.02846-38-38 WSV38S 38mm M52x2.0

2650Evw

ADjUsTAbLE ELbOw fiTTinG

Stainless steel


2650-06-06 EVW6L 6mm2650-08-08 EVW8L 8mm2650-10-10 EVW10L 10mm2650-12-12 EVW12L 12mm2650-15-15 EVW15L 15mm2650-18-18 EVW18L 18mm2650-22-22 EVW22L 22mm2650-28-28 EVW28L 28mm2650-35-35 EVW35L 35mm2650-42-42 EVW42L 42mm

2850-06-06 EVW6S 6mm2850-08-08 EVW8S 8mm2850-10-10 EVW10S 10mm2850-12-12 EVW12S 12mm2850-14-14 EVW14S 14mm2850-16-16 EVW16S 16mm2850-20-20 EVW20S 20mm2850-25-25 EVW25S 25mm2850-30-30 EVW30S 30mm2850-38-38 EVW38S 38mm



10

2660EvT

ADjUsTAbLE T-fiTTinG

Stainless steel


2660-06-06 EVT6L 6mm2660-08-08 EVT8L 8mm2660-10-10 EVT10L 10mm2660-12-12 EVT12L 12mm2660-15-15 EVT15L 15mm2660-18-18 EVT18L 18mm2660-22-22 EVT22L 22mm2660-28-28 EVT28L 28mm2660-35-35 EVT35L 35mm2660-42-42 EVT42L 42mm

2860-06-06 EVT6S 6mm2860-08-08 EVT8S 8mm2860-10-10 EVT10S 10mm2860-12-12 EVT12S 12mm2860-14-14 EVT14S 14mm2860-16-16 EVT16S 16mm2860-20-20 EVT20S 20mm2860-25-25 EVT25S 25mm2860-30-30 EVT30S 30mm2860-38-38 EVT38S 38mm

2670EvL

ADjUsTAbLE L-fiTTinG

Stainless steel


2670-06-06 EVL6L 6mm2670-08-08 EVL8L 8mm2670-10-10 EVL10L 10mm2670-12-12 EVL12L 12mm2670-15-15 EVL15L 15mm2670-18-18 EVL18L 18mm2670-22-22 EVL22L 22mm2670-28-28 EVL28L 28mm2670-35-35 EVL35L 35mm2670-42-42 EVL42L 42mm

2870-06-06 EVL6S 6mm2870-08-08 EVL8S 8mm2870-10-10 EVL10S 10mm2870-12-12 EVL12S 12mm2870-14-14 EVL14S 14mm2870-16-16 EVL16S 16mm2870-20-20 EVL20S 20mm2870-25-25 EVL25S 25mm2870-30-30 EVL30S 30mm2870-38-38 EVL38S 38mm

2689EvGE–ED

sTRAiGHT fiTTinGWith pre-assembled nut. ED sealing.

Perbunan. ISO 1179-2. Stainless steel


2689-06-02 EVGE6L 6mm G1/8"M2689-08-04 EVGE8L 8mm G1/4"M2689-10-04 EVGE10L 10mm G1/4"M2689-12-06 EVGE12L 12mm G3/8"M2689-12-08 EVGE12L 12mm G1/2"M2689-15-08 EVGE15L 15mm G1/2"M2689-18-08 EVGE18L 18mm G1/2"M2689-22-12 EVGE22L 22mm G3/4"M2689-28-16 EVGE28L 28mm G1"M2689-35-20 EVGE35L 35mm G11/4"M2689-42-24 EVGE42L 42mm G11/2"M

2889-06-04 EVGE6S 6mm G1/4"M2889-08-04 EVGE8S 8mm G1/4"M2889-10-06 EVGE10S 10mm G3/8"M2889-12-06 EVGE12S 12mm G3/8"M2889-12-08 EVGE12S 12mm G1/2"M2889-14-08 EVGE14S 14mm G1/2"M2889-16-08 EVGE16S 16mm G1/2"M2889-20-12 EVGE20S 20mm G3/4"M2889-25-16 EVGE25S 25mm G1"M2889-30-20 EVGE30S 30mm G11/4"M2889-38-24 EVGE38S 38mm G11/2"M

2701GAi – G

sTRAiGHT fiTTinG – G f

Stainless steel


2701-06-02 GAI6L 6mm G1/8"F2701-08-04 GAI8L 8mm G1/4"F2701-10-04 GAI10L 10mm G1/4"F2701-10-06 GAI10L 10mm G3/8"F2701-12-06 GAI12L 12mm G3/8"F2701-12-08 GAI12L 12mm G1/2"F2701-15-08 GAI15L 15mm G1/2"F2701-18-08 GAI18L 18mm G1/2"F2701-22-12 GAI22L 22mm G3/4"F2701-28-16 GAI28L 28mm G1"F2701-35-20 GAI35L 35mm G11/4"F2701-42-24 GAI42L 42mm G11/2"F

2901-06-04 GAI6S 6mm G1/4"F2901-08-04 GAI8S 8mm G1/4"F2901-10-06 GAI10S 10mm G3/8"F2901-12-06 GAI12S 12mm G3/8"F2901-14-08 GAI14S 14mm G1/2"F2901-16-08 GAI16S 16mm G1/2"F2901-20-12 GAI20S 20mm G3/4"F2901-25-16 GAI25S 25mm G1"F2901-30-20 GAI30S 30mm G11/4"F2901-38-24 GAI38S 38mm G11/2"F



2703mAv – G

mAnOmETER – fiTTinG

Stainless steel. Cutting edge ring


2703-06-04 MAV6L 6mm G1/4"F2703-08-04 MAV8L 8mm G1/4"F2703-10-04 MAV10L 10mm G1/4"F2703-12-04 MAV12L 12mm G1/4"F

2903-06-08 MAV6S 6mm G1/2"F2903-08-08 MAV8S 8mm G1/2"F2903-10-08 MAV10S 10mm G1/2"F2903-12-06 MAV12S 12mm G3/8"F2903-12-08 MAV12S 12mm G1/2"F

2704mAv – Ev – G mAnOmETER

Pre-assembled fitting. Stainless steel


2704-06-04 MAV-EV6L 6mm G1/4"F2704-08-04 MAV-EV8L 8mm G1/4"F2704-10-04 MAV-EV10L10mm G1/4"F2704-12-04 MAV-EV12L12mm G1/4"F

2904-06-08 MAV-EV6S 6mm G1/2"F2904-08-08 MAV-EV8S 8mm G1/2"F2904-10-08 MAV-EV10S10mm G1/2"F2904-12-08 MAV-EV12S12mm G1/2"F

2705RED

REDUCTiOn – fiTTinG

Stainless steel


2705-08-06 RED8/6L 8-6mm2705-10-06 RED10/6L 10-6mm2705-10-08 RED10/8L 10-8mm2705-12-06 RED12/6L 12-6mm2705-12-08 RED12/8L 12-8mm2705-12-10 RED12/10L 12-10mm2705-15-06 RED15/6L 15-6mm2705-15-08 RED15/8L 15-8mm2705-15-10 RED15/10L 15-10mm2705-15-12 RED15/12L 15-12mm2705-18-08 RED18/8L 18-8mm2705-18-10 RED18/10L 18-10mm2705-18-12 RED18/12L 18-12mm2705-18-15 RED18/15L 18-15mm2705-22-12 RED22/12L 22-12mm2705-22-15 RED22/15L 22-15mm2705-22-18 RED22/18L 22-18mm2705-28-12 RED28/12L 28-12mm2705-28-15 RED28/15L 28-15mm2705-28-18 RED28/18L 28-18mm2705-28-22 RED28/22L 28-22mm2705-35-28 RED35/28L 35-28mm2705-42-28 RED42/28L 42-28mm2705-42-35 RED42/35L 42-35mm

2905-08-06 RED8/6S 8-6mm2905-10-06 RED10/6S 10-6mm2905-10-08 RED10/8S 10-8mm2905-12-06 RED12/6S 12-6mm2905-12-08 RED12/8S 12-8mm2905-12-10 RED12/10S 12-10mm2905-14-10 RED14/10S 14-10mm2905-14-12 RED14/12S 14-12mm2905-16-06 RED16/6S 16-6mm2905-16-08 RED16/8S 16-8mm2905-16-10 RED16/10S 16-10mm2905-16-12 RED16/12S 16-12mm2905-16-14 RED16/14S 16-14mm2905-20-10 RED20/10S 20-10mm2905-20-12 RED20/12S 20-12mm2905-20-14 RED20/14S 20-14mm2905-20-16 RED20/16S 20-16mm2905-25-16 RED25/16S 25-16mm2905-25-20 RED25/20S 25-20mm2905-30-16 RED30/16S 30-16mm2905-30-20 RED30/20S 30-20mm2905-30-25 RED30/25S 30-25mm2905-38-25 RED38/25S 38-25mm2905-38-30 RED38/30S 38-30mm



10

2707kOR – L

REDUCTiOn

Pre-assembled nut. Stainless steel

2907kORO – s

REDUCTiOn

Pre-assebmled nut. Stainless steel

Partnumber Type Pipesize Partnumber Type Pipesize

2707-08-06 KORF8/6L 8-6mm2707-10-06 KORF10/6L 10-6mm2707-10-08 KORF10/8L 10-8mm2707-12-06 KORF12/6L 12-6mm2707-12-08 KORF12/8L 12-8mm2707-12-10 KORF12/10L 12-10mm2707-15-06 KORF15/6L 15-6mm2707-15-08 KORF15/8L 15-8mm2707-15-10 KORF15/10L 15-10mm2707-15-12 KORF15/12L 15-12mm2707-18-06 KORF18/6L 18-6mm2707-18-08 KORF18/8L 18-8mm2707-18-10 KORF18/10L 18-10mm2707-18-12 KORF18/12L 18-12mm2707-18-15 KORF18/15L 18-15mm2707-22-06 KORF22/6L 22-6mm2707-22-08 KORF22/8L 22-8mm2707-22-10 KORF22/10L 22-10mm2707-22-12 KORF22/12L 22-12mm2707-22-15 KORF22/15L 22-15mm2707-22-18 KORF22/18L 22-18mm2707-28-06 KORF28/6L 28-6mm2707-28-08 KORF28/8L 28-8mm2707-28-10 KORF28/10L 28-10mm2707-28-12 KORF28/12L 28-12mm2707-28-15 KORF28/15L 28-15mm2707-28-18 KORF28/18L 28-18mm2707-28-22 KORF28/22L 28-22mm2707-35-06 KORF35/6L 35-6mm2707-35-08 KORF35/8L 35-8mm2707-35-10 KORF35/10L 35-10mm2707-35-12 KORF35/12L 35-12mm2707-35-15 KORF35/15L 35-15mm2707-35-18 KORF35/18L 35-18mm2707-35-22 KORF35/22L 35-22mm2707-35-28 KORF35/28L 35-28mm2707-42-10 KORF42/10L 42-10mm2707-42-12 KORF42/12L 42-12mm2707-42-15 KORF42/15L 42-15mm2707-42-18 KORF42/18L 42-18mm2707-42-22 KORF42/22L 42-22mm2707-42-28 KORF42/28L 42-28mm2707-42-35 KORF42/35L 42-35mm

2907-08-06 KORF8/6S 8-6mm2907-10-06 KORF10/6S 10-6mm2907-10-08 KORF10/8S 10-8mm2907-12-06 KORF12/6S 12-6mm2907-12-08 KORF12/8S 12-8mm2907-12-10 KORF12/10S 12-10mm2907-14-06 KORF14/6S 14-6mm2907-14-08 KORF14/8S 14-8mm2907-14-10 KORF14/10S 14-10mm2907-14-12 KORF14/12S 14-12mm2907-16-06 KORF16/6S 16-6mm2907-16-08 KORF16/8S 16-8mm2907-16-10 KORF16/10S 16-10mm2907-16-12 KORF16/12S 16-12mm2907-16-14 KORF16/14S 16-14mm2907-16-16 KORF16/16S 16-16mm2907-20-06 KORF20/6S 20-6mm2907-20-08 KORF20/8S 20-8mm2907-20-10 KORF20/10S 20-10mm2907-20-12 KORF20/12S 20-12mm2907-20-14 KORF20/14S 20-14mm2907-20-16 KORF20/16S 20-16mm2907-25-06 KORF25/6S 25-6mm2907-25-08 KORF25/8S 25-8mm2907-25-10 KORF25/10S 25-10mm2907-25-12 KORF25/12S 25-12mm2907-25-14 KORF25/14S 25-14mm2907-25-16 KORF25/16S 25-16mm2907-25-20 KORF25/20S 25-20mm2907-30-06 KORF30/6S 30-6mm2907-30-08 KORF30/8S 30-8mm2907-30-10 KORF30/10S 30-10mm2907-30-12 KORF30/12S 30-12mm2907-30-14 KORF30/14S 30-14mm2907-30-16 KORF30/16S 30-16mm2907-30-20 KORF30/20S 30-20mm2907-30-25 KORF30/25S 30-25mm2907-38-06 KORF38/6S 38-6mm2907-38-08 KORF38/8S 38-8mm2907-38-10 KORF38/10S 38-10mm2907-38-12 KORF38/12S 38-12mm2907-38-14 KORF38/14S 38-14mm2907-38-16 KORF38/16S 38-16mm2907-38-20 KORF38/20S 38-20mm2907-38-25 KORF38/25S 38-25mm2907-38-30 KORF38/30S 38-30mm



2720RHD

nOn-RETURn vALvE

Opening pressure 1 Bar. Stainless steel


2720-06-06 RHD6L 6mm2720-08-08 RHD8L 8mm2720-10-10 RHD10L 10mm2720-12-12 RHD12L 12mm2720-15-15 RHD15L 15mm2720-18-18 RHD18L 18mm2720-22-22 RHD22L 22mm2720-28-28 RHD28L 28mm2720-35-35 RHD35L 35mm2720-42-42 RHD42L 42mm

2920-06-06 RHD6S 6mm2920-08-08 RHD8S 8mm2920-10-10 RHD10S 10mm2920-12-12 RHD12S 12mm2920-14-14 RHD14S 14mm2920-16-16 RHD16S 16mm2920-20-20 RHD20S 20mm2920-25-25 RHD25S 25mm2920-30-30 RHD30S 30mm2920-38-38 RHD38S 38mm

Alternativeopeningpressures0.2;0.5;2and3Barareavailableonrequest.

2721 RHv – G – ED

nOn-RETURn vALvE

Opening pressure 1 Bar. ED sealing. Stainless steel


2721-06-02 RHV6L 6mm G1/8"M2721-08-04 RHV8L 8mm G1/4"M2721-10-04 RHV10L 10mm G1/4"M2721-12-06 RHV12L 12mm G3/8"M2721-15-08 RHV15L 15mm G1/2"M2721-18-08 RHV18L 18mm G1/2"M2721-22-12 RHV22L 22mm G3/4"M2721-28-16 RHV28L 28mm G1"M2721-35-20 RHV35L 35mm G11/4"M2721-42-24 RHV42L 42mm G11/2"M

2921-06-04 RHV6S 6mm G1/4"M2921-08-04 RHV8S 8mm G1/4"M2921-10-06 RHV10S 10mm G3/8"M2921-12-06 RHV12S 12mm G3/8"M2921-14-08 RHV14S 14mm G1/2"M2921-16-08 RHV16S 16mm G1/2"M2921-20-12 RHV20S 20mm G3/4"M2921-25-16 RHV25S 25mm G1"M2921-30-20 RHV30S 30mm G11/4"M2921-38-24 RHV38S 38mm G11/2"M

2723 RHZ – G – ED

nOn-RETURn vALvE



2723-06-02 RHZ6L 6mm G1/8"M2723-08-04 RHZ8L 8mm G1/4"M2723-10-04 RHZ10L 10mm G1/4"M2723-12-06 RHZ12L 12mm G3/8"M2723-15-08 RHZ15L 15mm G1/2"M2723-18-08 RHZ18L 18mm G1/2"M2723-22-12 RHZ22L 22mm G3/4"M2723-28-16 RHZ28L 28mm G1"M2723-35-20 RHZ35L 35mm G11/4"M2723-42-24 RHZ42L 42mm G11/2"M

2923-06-04 RHZ6S 6mm G1/4"M2923-08-04 RHZ8S 8mm G1/4"M2923-10-06 RHZ10S 10mm G3/8"M2923-12-06 RHZ12S 12mm G3/8"M2923-14-08 RHZ14S 14mm G1/2"M2923-16-08 RHZ16S 16mm G1/2"M2923-20-12 RHZ20S 20mm G3/4"M2923-25-16 RHZ25S 25mm G1"M2923-30-20 RHZ30S 30mm G11/4"M2923-38-24 RHZ38S 38mm G11/2"M

2727 RHDi

nOn-RETURn vALvE



2727-04-04 RHDI G1/4"F2727-06-06 RHDI G3/8"F2727-08-08 RHDI G1/2"F2727-12-12 RHDI G3/4"F2727-16-16 RHDI G1"F2727-20-20 RHDI G11/4"F2727-24-24 RHDI G11/2"F



10

2730PL

PLUG

With O-ring. Stainless steel

2747vH

REinfORCinG RinGFor thin-walled metal tubes

Stainless steel


Partnumber Type PipeID

2730-00-06 PL6L/S 6mm2730-00-08 PL8L/S 8mm2730-00-10 PL10L/S 10mm2730-00-12 PL12L/S 12mm2730-00-15 PL15L 15mm2730-00-18 PL18L 18mm2730-00-22 PL22L 22mm2730-00-28 PL28L 28mm2730-00-35 PL35L 35mm2730-00-42 PL42L 42mm

2930-00-06 PL6S 6mm2930-00-08 PL8S 8mm2930-00-10 PL10S 10mm2930-00-12 PL12S 12mm2930-00-14 PL14S 14mm2930-00-16 PL16S 16mm2930-00-20 PL20S 20mm2930-00-25 PL25S 25mm2930-00-30 PL30S 30mm2930-00-38 PL38S 38mm

2747-00-04 VH 4mm2747-00-05 VH 5mm2747-00-06 VH 6mm2747-00-07 VH 7mm2747-00-08 VH 8mm2747-00-09 VH 9mm2747-00-10 VH 10mm2747-00-11 VH 11mm2747-00-12 VH 12mm2747-00-13 VH 13mm2747-00-14 VH 14mm2747-00-15 VH 15mm2747-00-16 VH 16mm2747-00-17 VH 17mm2747-00-18 VH 18mm2747-00-19 VH 19mm2747-00-20 VH 20mm

2749D CUTTinG RinG

2-edge, progressive ring. Stainless steel


2749-00-06 D6L/S 6mm2749-00-08 D8L/S 8mm2749-00-10 D10L/S 10mm2749-00-12 D12L/S 12mm2749-00-15 D15L 15mm2749-00-18 D18L 18mm2749-00-22 D22L 22mm2749-00-28 D28L 28mm2749-00-35 D35L 35mm2749-00-42 D42L 42mm

2949-00-14 D14S 14mm2949-00-16 D16S 16mm2949-00-20 D20S 20mm2949-00-25 D25S 25mm2949-00-30 D30S 30mm2949-00-38 D38S 38mm

2750 m nUT

Stainless steel


2750-00-06 M6L 6mm M12x1.52750-00-08 M8L 8mm M14x1.52750-00-10 M10L 10mm M16x1.52750-00-12 M12L 12mm M18x1.52750-00-15 M15L 15mm M22x1.52750-00-18 M18L 18mm M26x1.52750-00-22 M22L 22mm M30x2.02750-00-28 M28L 28mm M36x2.02750-00-35 M35L 35mm M42x2.02750-00-42 M42L 42mm M52x2.0

2950-00-06 M6S 6mm M14x1.52950-00-08 M8S 8mm M16x1.52950-00-10 M10S 10mm M18x1.52950-00-12 M12S 12mm M20x1.52950-00-14 M14S 14mm M22x1.52950-00-16 M16S 16mm M24x1.52950-00-20 M20S 20mm M30x2.02950-00-25 M25S 25mm M36x2.02950-00-30 M30S 30mm M42x2.02950-00-38 M38S 38mm M52x2.0

sTAinLEss sTEEL ADAPTORs PRODUCT GROUP 780


7802sTRAiGHT ADAPTOR

G m – G m60° cone sealing. DIN 3852, A

Stainless steel


7802-02-02 G1/8"M G1/8"M7802-02-04 G1/8"M G1/4"M7802-04-04 G1/4"M G1/4"M7802-04-06 G1/4"M G3/8"M7802-04-08 G1/4"M G1/2"M7802-06-06 G3/8"M G3/8"M7802-06-08 G3/8"M G1/2"M7802-08-08 G1/2"M G1/2"M7802-08-12 G1/2"M G3/4"M7802-08-16 G1/2"M G1"M7802-12-12 G3/4"M G3/4"M7802-12-16 G3/4"M G1"M7802-16-16 G1"M G1"M7802-16-20 G1"M G11/4"M7802-20-20 G11/4"M G11/4"M7802-20-24 G11/4"M G11/2"M7802-24-24 G11/2"M G11/2"M7802-24-32 G11/2"M G2"M7802-32-32 G2"M G2"M

7805REDUCTiOn ADAPTOR

G m – G f



7805-02-02 G1/8"M G1/8"F7805-04-02 G1/4"M G1/8"F7805-04-04 G1/4"M G1/4"F7805-04-06 G1/4"M G3/8"F7805-06-04 G3/8"M G1/4"F7805-06-06 G3/8"M G3/8"F7805-06-08 G3/8"M G1/2"F7805-08-06 G1/2"M G3/8"F7805-08-08 G1/2"M G1/2"F7805-08-12 G1/2"M G3/4"F7805-12-08 G3/4"M G1/2"F7805-12-12 G3/4"M G3/4"F7805-12-16 G3/4"M G1"F7805-16-12 G1"M G3/4"F7805-16-16 G1"M G1"F7805-20-20 G11/4"M G11/4"F7805-20-24 G11/4"M G11/2"F7805-24-24 G11/2"M G11/2"F7805-32-24 G2"M Gs11/2"F

7807swivEL ADAPTOR

G fs – G fs

Stainless steel


7807-02-02 G1/8"FS G1/8"FS7807-02-04 G1/8"FS G1/4"FS7807-04-04 G1/4"FS G1/4"FS7807-06-06 G3/8"FS G3/8"FS7807-08-08 G1/2"FS G1/2"FS7807-12-12 G3/4"FS G3/4"FS7807-12-16 G3/4"FS G1"FS7807-16-16 G1"FS G1"FS

7808sTRAiGHT swivEL

G m – G fs

Stainless steel


7808-02-02 G1/8"M G1/8"FS7808-04-04 G1/4"M G1/4"FS7808-06-06 G3/8"M G3/8"FS7808-06-08 G3/8"M G1/2"FS7808-08-06 G1/2"M G3/8"FS7808-08-08 G1/2"M G1/2"FS7808-08-12 G1/2"M G3/4"FS7808-12-12 G3/4"M G3/4"FS7808-16-16 G1"M G1"FS7808-20-16 G11/4"M G1"FS7808-20-20 G11/4"M G11/4"FS7808-24-24 G11/2"M G11/2"FS7808-32-32 G2"M G2"FS

PRODUCT GROUP 780 sTAinLEss sTEEL ADAPTORs


10


G m – G f LOnG

Stainless steel


7809-02-04 G1/8"M G1/4"F7809-04-02 G1/4"M G1/8"F7809-04-06 G1/4"M G3/8"F7809-04-08 G1/4"M G1/2"F7809-04-12 G1/4"M G3/4"F7809-06-04 G3/8"M G1/4"F7809-06-08 G3/8"M G1/2"F7809-08-06 G1/2"M G3/8"F7809-08-12 G1/2"M G3/4"F7809-08-16 G1/2"M G1"F7809-12-08 G3/4"M G1/2"F7809-12-16 G3/4"M G1"F7809-12-20 G3/4"M G11/4"F7809-12-24 G3/4"M G11/2"F7809-16-12 G1"M G3/4"F7809-16-20 G1"M G11/4"F7809-16-24 G1"M G11/2"F7809-20-16 G11/4"M G1"F


G m – G f sHORT

Stainless steel


7810-06-02 G3/8"M G1/8"F7810-08-04 G1/2"M G1/4"F7810-12-04 G3/4"M G1/4"F7810-12-06 G3/4"M G3/8"F7810-12-08 G3/4"M G1/2"F7810-16-06 G1"M G3/8"F7810-16-08 G1"M G1/2"F7810-20-12 G11/4"M G3/4"F7810-24-16 G11/2"M G1"F7810-32-24 G2"M G11/2"F

7811sTRAiGHT bUsHinG

G f – G f

Stainless steel


7811-02-02 G1/8"F G1/8"F7811-02-04 G1/8"F G1/4"F7811-04-04 G1/4"F G1/4"F7811-04-06 G1/4"F G3/8"F7811-06-06 G3/8"F G3/8"F7811-08-08 G1/2"F G1/2"F7811-12-12 G3/4"F G3/4"F7811-16-16 G1"F G1"F7811-20-20 G11/4"F G11/4"F7811-24-24 G11/2"F G11/2"F7811-32-32 G2"F G2"F


G m – R m

Stainless steel


7812-04-02 G1/4"M R1/8"M7812-04-04 G1/4"M R1/4"M7812-06-02 G3/8"M R1/8"M7812-06-06 G3/8"M R3/8"M7812-08-06 G1/2"M R3/8"M7812-08-08 G1/2"M R1/2"M7812-12-12 G3/4"M R3/4"M7812-12-16 G3/4"M R1"M7812-20-20 G11/4"M R11/4"M7812-24-24 G11/2"M R11/2"M7812-32-32 G2"M R2"M


G f – jiC m

Stainless steel


7813-04-07 G1/4"M JIC7/16"M

sTAinLEss sTEEL ADAPTORs PRODUCT GROUP 780



G m – nPT m

Stainless steel


7822-02-02 G1/8"M 1/8"-27NPTM7822-04-04 G1/4"M 1/4"-18NPTM7822-04-06 G1/4"M 3/8"-18NPTM7822-06-04 G3/8"M 1/4"-18NPTM7822-06-06 G3/8"M 3/8"-18NPTM7822-08-04 G1/2"M 1/4"-18NPTM7822-08-06 G1/2"M 3/8"-18NPTM7822-08-08 G1/2"M 1/2"-14NPTM7822-08-12 G1/2"M 3/4"-14NPTM7822-08-16 G1/2"M 1"-11½NPTM7822-10-08 G5/8"M 1/2"-14NPTM7822-12-12 G3/4"M 3/4"-14NPTM7822-16-12 G1"M 3/4"-14NPTM7822-16-16 G1"M 1"-11½NPTM7822-20-16 G11/4"M 1"-11½NPTM7822-20-20 G11/4"M 11/4"-11½NPTM7822-24-16 G11/2"M 1"-11½NPTM7822-24-24 G11/2"M 11/2"-11½NPTM7822-32-32 G2"M 2"-11½NPTM

7831ELbOw 90° ADAPT0R

G m – G fs

Forged. Stainless steel


7831-02-02 G1/8"M 90°Forged G1/8"FS7831-04-04 G1/4"M 90°Forged G1/4"FS7831-06-06 G3/8"M 90°Forged G3/8"FS7831-08-08 G1/2"M 90°Forged G1/2"FS7831-12-12 G3/4"M 90°Forged G3/4"FS7831-16-16 G1"M 90°Forged G1"FS7831-20-20 G11/4"M 90°Forged G11/4"FS7831-24-24 G11/2"M 90°Forged G11/2"FS7831-32-32 G2"M 90°Forged G2"FS

7835swivEL ELbOw 90° bEnD

G m – G fs

Stainless steel


7835-04-04 G1/4"M 90° G1/4"FS7835-06-06 G3/8"M 90° G3/8"FS7835-08-08 G1/2"M 90° G1/2"FS7835-12-12 G3/4"M 90° G3/4"FS7835-16-16 G1"M 90° G1"FS

7836ELbOw ADAPTOR 90°

G m – R m

Stainless steel


7836-02-02 G1/8"M 90T R1/8"M7836-04-04 G1/4"M 90T R1/4"M7836-06-06 G3/8"M 90T R3/8"M7836-08-08 G1/2"M 90T R1/2"M7836-12-12 G3/4"M 90T R3/4"M7836-16-16 G1"M 90T R1"M

7851T-ADAPTOR

G m – G m – G m

Stainless steel

Partnumber Thread1 x Thread2 x Thread3

7851-06-06 G3/8"M G3/8"M G3/8"M7851-08-08 G1/2"M G1/2"M G1/2"M7851-12-12 G3/4"M G3/4"M G3/4"M7851-16-16 G1"M G1"M G1"M

7852T-ADAPTOR

G fs – G fs – G fs

Stainless steel


7852-04-04 G1/4"FS G1/4"FS G1/4"FS7852-06-06 G3/8"FS G3/8"FS G3/8"FS7852-08-08 G1/2"FS G1/2"FS G1/2"FS7852-12-12 G3/4"FS G3/4"FS G3/4"FS7852-16-16 G1"FS G1"FS G1"FS

7853T-ADAPTOR

G m – G m – G fs

Stainless steel


7853-04-04 G1/4"M G1/4"M G1/4"FS7853-06-06 G3/8"M G3/8"M G3/8"FS7853-08-08 G1/2"M G1/2"M G1/2"FS7853-12-12 G3/4"M G3/4"M G3/4"FS7853-16-16 G1"M G1"M G1"FS

PRODUCT GROUP 780 sTAinLEss sTEEL ADAPTORs


10

7854L-ADAPTOR

G m – G fs – G m

Stainless steel


7854-04-04 G1/4"M G1/4"FS G1/4"M7854-06-06 G3/8"M G3/8"FS G3/8"M7854-08-08 G1/2"M G1/2"FS G1/2"M7854-12-12 G3/4"M G3/4"FS G3/4"M7854-16-16 G1"M G1"FS G1"M

7861PLUG G m

Stainless steel


7861-00-02 Plug G1/8"M7861-00-04 Plug G1/4"M7861-00-06 Plug G3/8"M7861-00-08 Plug G1/2"M7861-00-12 Plug G3/4"M7861-00-16 Plug G1"M7861-00-20 Plug G11/4"M

7861-10PLUG R m

Stainless steel


7861-10-06 Plug R3/8"M7861-10-08 Plug R1/2"M

7861-20PLUG R fs

Stainless steel


7861-20-04 Plug G1/4"FS7861-20-06 Plug G3/8"FS7861-20-08 Plug G1/2"FS7861-20-12 Plug G3/4"FS7861-20-16 Plug G1"FS

7863insET PLUG G m

Stainless steel


7863-00-02 Insetplug G1/8"M7863-00-04 Insetplug G1/4"M7863-00-06 Insetplug G3/8"M7863-00-08 Insetplug G1/2"M7863-00-12 Insetplug G3/4"M7863-00-16 Insetplug G1"M7863-00-20 Insetplug G11/4"M7863-00-24 Insetplug G11/2"M

7890bULkHEAD G m – G m


7890-04-04 G1/4"M Bulkhead G1/4"M7890-06-06 G3/8"M Bulkhead G3/8"M7890-08-08 G1/2"M Bulkhead G1/2"M7890-12-12 G3/4"M Bulkhead G3/4"M

sTAinLEss sTEEL fLARE fiTTinGs PRODUCT GROUP 790


7901j G

sTRAiGHT jOinT fiTTinG

Stainless steel

7902j w

ELbOw jOinT fiTTinG

Stainless steel

7903j T

T-jOinT fiTTinG

Stainless steel

7904j k

CROss jOinT fiTTinG

Stainless steel

Partnumber Type Pipedim.1(mm) Pipedim.2(mm)

Partnumber Type Pipedim.(mm)



7901-07-07 J G 6 67901-09-09 J G 10 107901-12-12 J G 12 127901-14-14 J G 14|15|16 14|15|167901-17-17 J G 18|20 18|207901-21-21 J G 25 257901-26-26 J G 30|32 30|327901-30-30 J G 38 38

7902-07-07 J W 67902-08-08 J W 87902-09-09 J W 107902-12-12 J W 127902-14-14 J W 14|15|167902-21-21 J W 257902-26-26 J W 30|32

7903-07-07 J T 67903-08-08 J T 87903-09-09 J T 107903-12-12 J T 127903-14-14 J T 14|15|167903-17-17 J T 18|207903-21-21 J T 257903-26-26 J T 30|32

7904-12-12 JK 127904-17-17 JK 18|207904-26-26 JK 30|32

7905j sv

sTRAiGHT bULkHEAD

Stainless steel


7905-07-07 JSV 67905-08-08 JSV 87905-09-09 JSV 107905-12-12 JSV 127905-14-14 JSV 14|15|167905-17-17 JSV 18|207905-21-21 JSV 257905-26-26 JSV 30|327905-30-30 JSV 38

7911j GE

sTRAiGHT fiTTinG – nPTf-THREAD

Stainless steel

Partnumber Type Pipedim.(mm) Thread

7911-07-02 JGE 6 1/8"-27NPTF7911-09-04 JGE 10 1/4"-18NPTF7911-09-06 JGE 10 3/8"-18NPTF7911-12-04 JGE 12 1/4"-18NPTF7911-12-08 JGE 12 1/2"-14NPTF7911-17-08 JGE 18|20 1/2"-14NPTF7911-21-16 JGE 25 1"-11½NPTF

PRODUCT GROUP 790 sTAinLEss sTEEL fLARE fiTTinGs


10

7913j GE sTRAiGHT

fiTTinG – G-THREAD

With O-ring and washer. Stainless steel


7913-07-02 JGE 6 G1/8"M7913-07-04 JGE 6 G1/4"M7913-07-06 JGE 6 G3/8"M7913-07-08 JGE 6 G1/2"M7913-08-04 JGE 8 G1/4"M7913-08-06 JGE 8 G3/8"M7913-09-06 JGE 10 G3/8"M7913-09-08 JGE 10 G1/2"M7913-12-04 JGE 12 G1/4"M7913-12-06 JGE 12 G3/8"M7913-12-08 JGE 12 G1/2"M7913-12-12 JGE 12 G3/4"M7913-14-06 JGE 14|15|16 G3/8"M7913-14-08 JGE 14|15|16 G1/2"M7913-14-12 JGE 14|15|16 G3/4"M7913-17-08 JGE 18|20 G1/2"M7913-17-12 JGE 18|20 G3/4"M7913-17-16 JGE 18|20 G1"M7913-21-12 JGE 25 G3/4"M7913-21-16 JGE 25 G1"M7913-21-20 JGE 25 G11/4"M7913-26-16 JGE 30|32 G1"M7913-26-20 JGE 30|32 G11/4"M7913-30-20 JGE 38 G11/4"M7913-30-24 JGE 38 G11/2"M

7914j GE sTRAiGHT

fiTTinG – Unf-THREAD



7914-07-07 JGE 6 7/16"-20UNF7914-07-09 JGE 6 9/16"-18UNF7914-09-09 JGE 10 9/16"-18UNF7914-12-09 JGE 12 9/16"-18UNF7914-12-12 JGE 12 3/4"-16UNF7914-12-14 JGE 12 7/8"-14UNF7914-14-14 JGE 14|15|16 7/8"-14UNF7914-17-14 JGE 18|20 7/8"-14UNF7914-17-17 JGE 18|20 11/16"-12UNF7914-21-21 JGE 25 15/16"-12UNF7914-26-26 JGE 30|32 15/8"-12UNF7914-30-30 JGE 38 17/8"-12UNF

Partnumber TypePipedim.(mm) Thread

7920-07-02 JWE 6 1/8"-27NPTF7920-09-04 JWE 10 1/4"-18NPTF7920-14-08 JWE 14|15|16 1/2"-14NPTF7920-26-20 JWE 30|32 11/4"-11½NPTF

7920j wE

ELbOw fiTTinG – nPTf-THREAD

Stainless steel

7922j wE ADjUsTAbLE

fiTTinG – G-THREAD

With O-ring and washer. Stainless steel


7922-07-02 JWE 6 G1/8"M7922-07-04 JWE 6 G1/4"M7922-08-04 JWE 8 G1/4"M7922-09-04 JWE 10 G1/4"M7922-09-06 JWE 10 G3/8"M7922-09-08 JWE 10 G1/2"M7922-12-06 JWE 12 G3/8"M7922-12-08 JWE 12 G1/2"M7922-14-08 JWE 14|15|16 G1/2"M7922-17-08 JWE 18|20 G1/2"M7922-17-12 JWE 18|20 G3/4"M7922-21-16 JWE 25 G1"M7922-26-20 JWE 30|32 G11/4"M7922-30-24 JWE 38 G11/2"M

7923j wE ADjUsTAbLE

fiTTinG – Unf-THREAD



7623-07-07 JWE 6 7/16"-20UNF7623-09-09 JWE 10 9/16"-18UNF7623-09-12 JWE 10 3/4"-16UNF7623-12-12 JWE 12 3/4"-16UNF7623-14-14 JWE 14|15|16 7/8"-14UNF7623-17-17 JWE 18|20 11/16"-12UNF7623-21-21 JWE 25 15/16"-12UNF7623-26-26 JWE 30|32 15/8"-12UNF7623-30-30 JWE 38 17/8"-12UNF



7951j GAi

sTRAiGHT fiTTinG – G-THREAD

Stainless steel


7951-07-04 JGAI 6 G1/4"F7951-08-04 JGAI 8 G1/4"F7951-09-06 JGAI 10 G3/8"F7951-12-08 JGAI 12 G1/2"F7951-14-08 JGAI 14|15|16 G1/2"F7951-17-12 JGAI 18|20 G3/4"F7951-21-16 JGAI 25 G1"F7951-26-20 JGAI 30|32 G11/4"F7951-30-24 JGAI 38 G11/2"F

7959j Gii sTRAiGHT ADAPTOR

wiTH jiC 37°

Swivel nut. Stainless steel


7959-07-07 J GII 6 67959-09-09 J GII 10 107959-12-12 J GII 12 127959-14-14 J GII 14|15|16 14|15|167959-17-17 J GII 18|20 18|20

7961j EvU 45° ELbOw fiTTinG

wiTH jiC 37°



7961-07-07 JEVU 67961-08-08 JEVU 87961-09-09 JEVU 107961-12-12 JEVU 127961-14-14 JEVU 14|15|167961-17-17 JEVU 18|207961-21-21 JEVU 257961-26-26 JEVU 30|327961-30-30 JEVU 38

7960j Evw

90° ELbOw fiTTinG wiTH jiC 37°



7960-07-07 JEVW 67960-08-08 JEVW 87960-09-09 JEVW 107960-12-12 JEVW 127960-14-14 JEVW 14|15|167960-17-17 JEVW 18|207960-21-21 JEVW 257960-26-26 JEVW 30|327960-30-30 JEVW 38

7962j EvT

T-fiTTinG wiTH jiC 37°



7962-07-07 JEVT 67962-08-08 JEVT 87962-09-09 JEVT 107962-12-12 JEVT 127962-14-14 JEVT 14|15|167962-17-17 JEVT 18|207962-21-21 JEVT 257962-26-26 JEVT 30|327962-30-30 JEVT 38

7963j EvL

L-fiTTinG wiTH jiC 37°



7963-07-07 JEVL 67963-08-08 JEVL 87963-09-09 JEVL 107963-12-12 JEVL 127963-14-14 JEVL 14|15|167963-17-17 JEVL 18|207963-21-21 JEVL 257963-26-26 JEVL 30|327963-30-30 JEVL 38

PRODUCT GROUP 790 sTAinLEss sTEEL fLARE fiTTinGs


10

7966j EvGE ADAPTOR

wiTH jiC 37° G-THREADSwivel nut. With O-ring and washer.

Stainless steel


7966-07-04 JEVGE 6 G1/4"M7966-08-04 JEVGE 8 G1/4"M7966-09-04 JEVGE 10 G1/4"M7966-09-06 JEVGE 10 G3/8"M7966-12-06 JEVGE 12 G3/8"M7966-12-08 JEVGE 12 G1/2"M7966-14-08 JEVGE 14|15|16 G1/2"M7966-17-08 JEVGE 18|20 G1/2"M7966-17-12 JEVGE 18|20 G3/4"M7966-21-12 JEVGE 25 G3/4"M7966-21-16 JEVGE 25 G1"M7966-26-20 JEVGE 30|32 G11/4"M7966-30-24 JEVGE 38 G11/2"M

7967j EvGE ADAPTOR

wiTH jiC 37° Unf-THREAD

Swivel nut. With O-ring. Stainless steel


7967-07-07 JEVGE 6 7/16"-20UNF7967-09-09 JEVGE 10 9/16"-18UNF7967-12-12 JEVGE 12 3/4"-16UNF7967-14-14 JEVGE 14|15|16 7/8"-14UNF7967-17-17 JEVGE 18|20 11/16"-12UNF7967-21-21 JEVGE 25 15/16"-12UNF7967-26-26 JEVGE 30|32 15/8"-12UNF7967-30-30 JEVGE 38 17/8"-12UNF

7970j kOR

REDUCTiOn

Stainless steel


7970-09-07 JKOR 10 67970-09-08* JKOR 10 87970-12-07 JKOR 12 67970-12-08 JKOR 12 87970-12-09 JKOR 12 107970-14-09 JKOR 14|15|16 107970-14-12* JKOR 14|15|16 127970-17-08 JKOR 18|20 87970-17-09 JKOR 18|20 107970-17-12 JKOR 18|20 127970-17-14* JKOR 18|20 14|15|167970-21-12 JKOR 25 127970-21-14 JKOR 25 14|15|167970-21-17 JKOR 25 18|207970-26-14 JKOR 30|32 14|15|167970-26-17 JKOR 30|32 18|207970-26-21 JKOR 30|32 257970-30-21 JKOR 38 257970-30-26 JKOR 38 30|32

*Thereductionismadeinonepiece.Theothersuseanut

fromthefittingonwhichthereductionhasbeenassembled.

*

7981j mA

mEAsUREmEnT COnnECTiOn

Stainless steel


7981-08-04 JMA 8 G1/4"F7981-09-04 JMA 10 G1/4"F7981-12-04 JMA 12 G1/4"F7981-17-04 JMA 18|20 G1/4"F7981-21-04 JMA 25 G1/4"F



7990j PLi

bLinD nUT

Stainless steel


7990-00-07 JPLI 67990-00-08 JPLI 87990-00-09 JPLI 107990-00-12 JPLI 127990-00-14 JPLI 14|15|167990-00-17 JPLI 18|207990-00-21 JPLI 257990-00-26 JPLI 30|327990-00-30 JPLI 38

7991j PLU PLUG

Stainless steel

7992j m nUT

Stainless steel



7991-00-07 JPLU 67991-00-09 JPLU 107991-00-12 JPLU 127991-00-17 JPLU 18|207991-00-21 JPLU 25

7992-00-07 J M 67992-00-08 J M 87992-00-09 J M 107992-00-12 J M 127992-00-14 J M 14|15|167992-00-17 J M 187992-00-18 J M 18|207992-00-19 J M 227992-00-26 J M 30|327992-00-30 J M 38

7993j D

CLAmPinG sLEEvE

Stainless steel


7993-00-06 J D 67993-00-08 J D 87993-00-10 J D 107993-00-12 J D 127993-00-14 J D 147993-00-15 J D 157993-00-16 J D 167993-00-18 J D 187993-00-20 J D 207993-00-25 J D 257993-00-30 J D 307993-00-32 J D 327993-00-38 J D 38

PRODUCT GROUP 860 sTAinLEss sTEEL bALL vALvEs


10

86312-wAy bALL vALvE,

G-THREADED, fEmALE

Stainless steel

Partnumber Connection DN Workpr.

8631-04-04 G1/4"F 6 50.0MPa8631-06-06 G3/8"F 10 50.0MPa8631-08-08 G1/2"F 12 50.0MPa8631-12-12 G3/4"F 20 35.0MPa8631-16-16 G1"F 25 35.0MPa8631-20-20 G11/4"F 32 31.5MPa8631-24-24 G11/2"F 40 31.5MPa8631-32-32 G2"F 50 31.5MPa


skL-COnnECTiOnStainless steel

PartnumberConnection Thread DN Workpr.

8632-06-12 SKL6 M12x1.5 4 50.0MPa8632-08-14 SKL8 M14x1.5 6 50.0MPa8632-10-16 SKL10 M16x1.5 8 50.0MPa8632-12-18 SKL12 M18x1.5 10 50.0MPa8632-15-22 SKL15 M22x1.5 12 50.0MPa8632-18-26 SKL18 M26x1.5 16 50.0MPa8632-22-30 SKL22 M30x2.0 20 35.0MPa8632-28-36 SKL28 M36x2.0 25 35.0MPa8632-35-45 SKL35 M45x2.0 32 31.5MPa8632-42-52 SKL42 M52x2.0 40 31.5MPa


sks-COnnECTiOnStainless steel

PartnumberConnection Thread DN Workpr.

8634-08-16 SKS8 M16x1.5 4 50.0MPa8634-10-18 SKS10 M18x1.5 6 50.0MPa8634-12-20 SKS12 M20x1.5 8 50.0MPa8634-16-24 SKS16 M24x1.5 12 50.0MPa8634-20-30 SKS20 M30x2.0 16 50.0MPa8634-25-36 SKS25 M36x2.0 20 35.0MPa8634-30-42 SKS30 M42x2.0 25 35.0MPa8634-38-52 SKS38 M52x2.0 32 31.5MPa

86413-wAy REvERsinG vALvE,

L-DRiLLED, G-THREADED, fEmALE

Stainless steel

Partnumber Connection DN Drill Workpr.

8641-04-04 G1/4"F 6 L-Drilled 40.0MPa8641-06-06 G3/8"F 10 L-Drilled 40.0MPa8641-08-08 G1/2"F 12 L-Drilled 35.0MPa8641-12-12 G3/4"F 20 L-Drilled 35.0MPa

86423-wAy REvERsinG vALvE,

T-DRiLLED, G-THREADED, fEmALE

Stainless steel

Partnumber Connection DN Drill Workpr.

8642-04-04 G1/4"F 6 T-Drilled 40.0MPa8642-06-06 G3/8"F 10 T-Drilled 40.0MPa8642-08-08 G1/2"F 12 T-Drilled 35.0MPa8642-12-12 G3/4"F 20 T-Drilled 35.0MPa8642-16-16 G1"F 25 T-Drilled 35.0MPa


LOw PREssURE, sHORT THREADTeflon, stainless steel

Partnumber Type Connection Workpr.

8690-04-04 Ballvalve G1/4"F 6.9MPa8690-06-06 Ballvalve G3/8"F 6.9MPa8690-08-08 Ballvalve G1/2"F 6.9MPa8690-12-12 Ballvalve G3/4"F 6.9MPa8690-16-16 Ballvalve G1"F 6.9MPa8690-20-20 Ballvalve G11/4"F 6.9MPa8690-24-24 Ballvalve G1/1/2"F 6.9MPa8690-32-32 Ballvalve G2"F 6.9MPa


LOw PREssURE, L-DRiLLEDTeflon, stainless steel

Partnumber Type Connection Workpr.

8691-06-06 L-drilled G3/8"F 6.9MPa8691-08-08 L-drilled G1/2"F 6.9MPa8691-12-12 L-drilled G3/4"F 6.9MPa8691-16-16 L-drilled G1"F 6.9MPa8691-20-20 L-drilled G11/4"F 6.9MPa8691-24-24 L-drilled G11/2"F 6.9MPa8691-32-32 L-drilled G2"F 6.9MPa

sTAinLEss sTEEL TEsT POinTs PRODUCT GROUP 800


8301-90TEsT POinTs m 16 x 2

G-THREADED

Stainless steel


Unf-THREADED

Stainiless steel


nPT-THREADED

Partnumber Type Connection



8301-90-02 TestnippleM16x2 G1/8"M8301-90-04 TestnippleM16x2 G1/4"M

8301-94-09 TestnippleM16x2 9/16"-18UNF

8301-95-04 TestnippleM16x2 9/16"-18NPT

8310mEAsUREmEnT HOsE

m 16 x 2 – G 1/4"Manometer connection WP 63.0 Mpa. Stainless steel

8311mEAsUREmEnT HOsE

m 16 x 2 – 2WP 63.0 Mpa. Stainless steel

Partnumber Type Length

Partnumber Type Length

8310-04-00 Measurementhose 400mm8310-10-00 Measurementhose 1,000mm8310-15-00 Measurementhose 1,500mm8310-20-00 Measurementhose 2,000mm8310-32-00 Measurementhose 3,200mm8310-40-00 Measurementhose 4,000mm

8311-04-00 Measurementhose 400mm8311-10-00 Measurementhose 1,000mm8311-15-00 Measurementhose 1,500mm8311-20-00 Measurementhose 2,000mm8311-32-00 Measurementhose 3,200mm8311-40-00 Measurementhose 4,000mm

Table of ConTenTsHYDRosCanD TeCHniCal infoRmaTion

Hose infoRmaTion Page

fiTTing infoRmaTion Page

Thread Table 371 DIN/PN Flange Dimensions 372 SAE Flange Dimensions 373 Sealing Principles 374 Tightening Torque for connection end 374 Tightening Torque 375

PRessuRe DRoP Tables Page

Hose 377 Hose Fitting 378 Quick Release Fitting, ISO A 379 Quick Release Fitting, HANSEN 379 Quick Release Fitting, BRUNNING 379 Quick Release Fitting, TEMA 380 Quick Release Fitting, FASTER 381

Hose Dimensioning 362 Flow Diameter 363 Installation examples 364 Calculation of Hose Length 365 Working Pressure, hydraulic hoses 366 ClassificationofHoseLength 367 Angular Relationship 368 Abbreviations for polymetric materials 368 Volumetric expansion 369 Temperature effect on working pressure of the P.T.F.E. hose 370 Vacuum Transformation Table 370

PiPe ClamPs Page

Installation recomendations 383

TRansfoRmaTion Tables Page

Pressure 376 Vacuum 376


361PRoDuCT CaTalogue 2009

11

Theabovemonogramisbasedonalaminarflow.Ahigherflowratecanbeusedinmanyapplications.If so, consideration should be taken to tank volume, outside temperature and if the hydraulic aggregate will operate for long or short periods of time. A scant dimensioning results in increased oil temperature.

Hose Dimensioning

flow (liter/min)

Diameter mm inch

flow speed (m/sek)

HYDRosCanD TeCHniCal infoRmaTion Hose infoRmaTion

362 PRoDuCT CaTalogue 2009

flow DiameTeR Flow diameter in millimeter

Maxflow l/min

5 m/s Pressure lines



1 2.1 2.7 4.6

2 2.9 3.8 6.5

3 3.6 4.6 8.0

4 4.1 5.3 9.2

5 4.6 6.0 10.3

6 5.1 6.5 11.3

7 5.5 7.0 12.2

8 5.8 7.5 13.0

9 6.2 8.0 13.8

10 6.5 8.4 14.6

12 7.1 9.2 16.0

14 7.7 10.0 17.2

16 8.2 10.6 18.4

18 8.7 11.3 19.6

20 9.2 11.9 20.6

22 9.7 12.5 21.6

24 10.1 13.0 22.6

26 10.5 13.6 23.5

28 10.9 14.1 24.4

30 11.3 14.6 25.3

32 11.7 15.1 26.1

34 12.0 15.5 26.9

36 12.4 16.0 27.7

38 12.7 16.4 28.4

40 13.0 16.8 29.2

45 13.8 17.9 30.9

50 14.6 18.8 32.6

55 15.3 19.7 34.2

60 16.0 20.6 35.7

65 16.6 21.5 37.2

70 17.2 22.3 38.6

75 17.9 23.1 39.9

80 18.4 23.8 41.2

85 19.0 24.5 42.5

90 19.6 25.3 43.7

95 20.1 25.9 44.9

100 20.6 26.6 46.1

110 21.6 27.9 48.4

120 22.6 29.2 50.5

130 23.5 30.3 52.6

140 24.4 31.5 54.5

150 25.3 32.6 56.5

160 26.1 33.7 58.3

170 26.9 34.7 60.1

180 27.7 35.7 61.8

190 28.4 36.7 63.5

200 29.2 37.6 65.2

220 30.6 39.5 68.4

240 31.9 41.2 71.4

260 33.2 42.9 74.3

280 34.5 44.5 77.1

300 35.7 46.1 79.8

320 36.9 47.6 82.5

340 38.0 49.1 85.0

360 39.1 50.5 87.5

380 40.2 51.9 89.9

400 41.2 53.2 92.2

450 43.7 56.5 97.8

500 46.1 59.5 103.1

DeTeRmining Tube size foR HYDRauliC sYsTems

Proper tube material, type and size for a given ap-plicationandtypeoffittingiscriticalforefficientandtroublefreeoperationofthefluidsystem.Selectionofproper tubing involves choosing the right tube material, and determining the optimum tube size (O.D. and wall thickness).

Atubethatistoosmallcauseshighfluidvelocity,whichhas many detrimental effects. In pressure lines, it causes high friction losses and turbulence, both result-ing in high pressure drops and heat generation. High heat accelerates wear in moving parts and rapid aging of seals and hoses, all resulting in reduced component life. High heat generation also means wasted energy, andhence,lowefficiency.

DeTeRmine RequiReD flow DiameTeR

Usetabletodeterminerecommendedflowdiameterfortherequiredflowrateandtypeofline.Thetableisbasedonthefollowingrecommendedflowvelocities:

m

sPressure lines - 3 --> 5

m

sReturn lines - 2 --> 4

m

sSuction lines - 1

Avoidflowrates>8m/s!The resulting forces are high and can destroy the tube lines.

Hose infoRmaTion HYDRosCanD TeCHniCal infoRmaTion


11

insTallaTion examPles

RigHTwRong



CalCulaTion of Hose lengTH

In the majority of hose installations, the hose assembly is required to have at least one bend. It is therefore essential toavoidalltensionsintheendfittingsinordertoobtainthemaximumlifeexpectancyofthehose.

The following information is intended to provide designers a guide for correct hose length calculation.

static insTallaTion

length = 2a + (3,14 x R)

length = 2a + x

flexible insTallaTion

length = 2a + x + T

Inordertoavoidtensionsintheendfittings,bothendsof a short hose should allowed to be straight, so that thebendstartswayfromthefittings.

Thecalculateddistance(A),showedinthefiguresabove, is a recommended distance to cover for both the fittingandthestraightpartofthehose.Thedifferentdiameter parameters are available in the table below.

Thus, the hose length of the example in Fig. 1 should be L = 2A + (3,14 x R) (where R should not be smaller than the recommended minimum bend radius for each hose dimension).

For all other types of bends, the general formula L = 2A + X should cover each installation (where X is the length of the hose bend, which should be suitable cal-culated or measured).

Iftheinstallationisflexible,specialconsiderationcon-cerning the hose length must be taken. It is of course necessary to allow an extra "straight hose" to relieve thetensionattheendfittingswhenthehoseisbeingflexed.

Thus, if the hose length is T, the extra length should at eachfittingbe1/2T.

The general formula is L = 2A + X + T. This additional length(T)willpermitreasonableflexinginalldirec-tions.

Fig. 1

Note:Thedistance(A)doesnotincludethelengthofspecialfittingsoradapters.Iftheseareincludedintheinstalla-tion, extra length must be added to the distance (A).

Fig. 2

Diam. 1/4" 3/8" 1/2" 5/8" 3/4" 1" 1 1/4" 1 1/2" 2"

"A" mm. 105 115 130 140 155 175 200 225 255



11

woRking PRessuRe, HYDRauliC Hose (mPa)

1 MPA = 10 BAR 1 BAR = 14,5 PSI Safetyfactor4:1

Hose Dimension Hose Type 02 03 04 05 06 08 10 12 16 20 24 32 Work temp. C°

1003-10 SAE 100 100 R1AT – Red 19.0 15.5 14.0 8.5 7.0 -40 – +100

1014 Blastopak 100.0 100.0 100.0 100.0 80.0 -40 – +120

1015Deltaflex 50.0 44.5 41.5 39.0 35.0 31.0 28.0 26.0 21.0 -40 – +100

1015-14DeltaflexCO 50.0 44.5 41.5 39.0 35.0 31.0 28.0 26.0 21.0 -40 – +100

1031-01 HYDROSCAND T1111 30.0 27.5 21.5 21.2 17.5 14.0 11.5 9.5 -40 – +100

1032 HYDROSCAND T1112 Twin

1032 HYDROSCAND T1113 Triplet 27.5 21.2 -40 – +100

1034-01 HYDROSCAND T1211 33.0 26.0 -40 – +100

1036 HYDROSCAND T1212 Twin 33.0 26.0 -40 – +100

1037-01 HYDROSCAND T1121 Spray paint hose 36.2 31.0 22.4 19.0 -40 – +100

1038-01 HYDROSCAND T1221 Spray paint hose 40.0 33.0 26.0 -40 – +100

1045-01 HYDROSCAND T7011 21.0 21.0 21.0 17.5 16.0 14.0 9.0 7.0 -40 – +100

1047 Supertwin T7012 Twin 21.0 21.0 17.5 16.0 14.0 -40 – +100

1049-01 HYDROSCAND T8011 35.0 35.0 28.0 24.5 -40 – +100

1052 HYDROSCAND T8012 Supertwin Twin 28.0 24.5 -40 – +100

1054 High Pressure Water Cleaning Hose HTC-1C 33.0 28.0 33.0 27.0 -40 – +155

1055 High Pressure Water Cleaning Hose HTC-2C 45.0 45.0 36.0 -40 – +155

1056-1 HYDROSCAND T3311 80.0 -40 – +100

1058-1 HYDROSCAND T3211 70.0 70.0 -40 – +100

1059-01 HYDROSCAND T8081 35.0 28.0 24.5 -40 – +100

1071 HI-TEMP 22.5 18 16 13 10.5 8.8 6.3 5 4 -40 – +150

1075Compactflex 34.5 29.5 27.5 24.0 19.0 15.5 -40 – +100

1087 Marion 2XA 40.0 35.0 30.0 27.5 23.5 18.5 -40 – +100

1091 P.T.F.E. hose convoluted 13.8 11.2 7.8 6.8 5.2 3.5 -70 – +230

1092-01 P.T.F.E hose 24.2 19.8 16.8 15.5 13.8 12.1 8.6 7.8 6.0 -60 – +260

1093-01 P.T.F.E. hose 17.3 16.0 13.8 12.4 8.6 7.8 5.3 -60 – +260

1094 P.T.F.E. hose, tape wrapped convoluted 6.9 8.6 9.6 7.6 6.9 6.9 5.2 3.4 -54 – +204

1095 P.T.F.E. hose, two braids of stainless steels 19.8 19.0 14.7 -60 – +260

1101-00Egeflex1 25.0 22.5 21.5 18.0 16.0 13.0 10.5 8.8 6.3 5.0 4.0 -40 – +100

1101-14Egeflex1CO 25.0 22.5 21.5 18.0 16.0 13.0 10.5 8.8 6.3 5.0 4.0 -40 – +100

1102-00Egeflex2 41.5 40.0 35.0 33.0 27.5 25.0 21.5 16.5 -40 – +100

1102-14Egeflex2CO 41.5 40.0 35.0 33.0 27.5 25.0 21.5 16.5 12.5 9.0 8.0 -40 – +100

1102-44Egeflex2PO 40.0 33.0 27.5 -50 – +100

1103-03Kappaflex1 29.0 25.0 23.0 20.0 15.0 12.5 11.0 10.0 -40 – +100

1105-10Kappaflex2CO 45.0 42.0 38.5 34.5 29.0 28.0 20.0 -40 – +100

1106-03Kappaflex3 47.0 41.0 37.5 32.7 -40 – +100

1110-00/-03 IsoBar 10 10 10 -40 – +100

1118-02Gammaflex5 42.0 38.0 32.5 29.0 25.0 -40 – +100

1142-14 IsoBar42 / 1135-14 IsoBar 35 CO 42.0 42.0 42.0 42.0 34.5 -40 – +121

1201-11 SpirStar type 2W 140.0 128.0 100.0 92.0 100.0 -30 – +80

1201-30 SpirStar type 4 216.0 180.0 150.0 150.0 150.0 128.0 100.0 100.0 -30 – +80

1201-40 SpirStar type 6 280.0 262.0 200.0 192.0 168.0 140.0 -30 – +80

1201-46 SpirStar type 6H 280.0 250.0 -30 – +80



ClassifiCaTion of Hose lengTH How To measuRe THe Hose wHen oRDeRing a PRe-assembleD Hose:

ToleRanCe foR assembleD Hoses

Hose length (mm) Tolerance 0 – 300 +/- 3 mm 300 – 1 000 +/- 6 mm 1 000 – +/- 1 %, ex. 40 mm at a hose length of 2,000 mm

Length between sealing surface

FSandMfittings

Length between the angels center lines

90°and45°fittings

Length between the pipe bend centre lines

90°SAEflangefittings

Length between the pipe bend centre lines andthesealingsurfaceoftheflange

Straight45°SAEflangefittings

Length between the angels center lines

90°and45°fittings


Mfittings


FSfittings


Straightstandpipeandfittings



11

angulaR RelaTionsHiP

abbReViaTions foR PolYmeRiC maTeRials

Fitting(A)hasposition0°.Turnfitting(B)toadefinedangle(V)°.Theangletoleranceis±3°.

BR Butadiene rubber

CM Chloroten rubber

CR Chloroprene rubber

CSM Chlorosulfonated polyethylene (Hypalon)

EPDM Ethylene-propylene rubber

EPM Ethylene-propylene rubber

IR Butyl rubber

NBR Nitrile rubber

NR Natural rubber

PA Polyamide

PE Polyethylene

PEL Polyethylene

P.T.F.E. Polytetraflouroethylene(Teflon)

PU Polyurethane

PVC Polyvinyl chloride

SBR Styrene butadiene rubber

UPE Ultra high molecular weight polyethylene

XLPE Cross linked polyethylene



VolumeTRiC exPansion

en 853 1sn

en 853 2sn

DelTaflex



11

ATM PSIWater meter

Quicksilver mm %

0.1 1.4 1 73.6 10

0.2 2.8 2 147.1 20

0.3 4.2 3 220.7 30

0.4 5.7 4 249.2 40

0.5 7.1 5 267.8 50

0.6 8.5 6 441.3 60

0.7 10.0 7 514.9 70

0.8 11.4 8 588.4 80

0.9 12.8 9 662.0 90

1.0 14.2 10 735.5 100

TemPeRaTuRe effeCT

VaCuum TRansfoRmaTion Table

Temperature effect on working pressure of the P.T.f.e. hose

TemperaTure

pres

sure



THReaD Table

male parallel thread

External diameter mm

Pipe thread Conical pipe thread Metric thread Unified thread NPTF / NPSM Internal diameter

mm6,9 – 7,3 1/16" – 27 6.7 – 7.17,5 – 7,7 1/16" – 28 6.6 – 6.89,2 – 9,7 1/8" – 27 9.1 – 9.59,5 – 9,7 1/8" – 28 8.6 – 8.89,7 – 9,9 M10 x 1,5 8.2 – 8.6

10,9 – 11,1 7/16" – 20 UNF 9.7 – 10.012,1 – 12,8 1/4" – 18 11.9 – 12.512,5 – 12,7 1/2" – 20 UNF 11.3 – 11.612,9, – 13,2 1/4" – 19 11.4 – 11.913,6 – 13,9 M14 x 1,5 12.2 – 12.614,0 – 14,3 9/16" – 18 UNF 12.8 – 13.115,5 – 16,2 3/8" – 18 15.3 – 15.915,6 – 15,9 M16 x 1,5 14.2 – 14.616,4 – 16,7 3/8" – 19 15.0 – 15.417,2 – 17,4 11/16" – 16 UN 15.7 – 16.117,6 – 17,9 M18 x 1,5 16.2 – 16.618,8 – 19,0 3/4" – 16 UNF 17.3 – 17.719,3 – 20,1 1/2" – 14 18.9 – 18.620,4 – 20,6 13/16" – 16 UN 18.9 – 19.320,7 – 21,0 1/2" – 14 18.6 – 19.221,6 – 21,9 M22 x 1,5 20.2 – 20.621,9 – 22,2 7/8" – 14 UNF 20.3 –20.722,6 – 22,9 5/8" – 14 20.6 – 21.123,6 – 23,9 M24 x 1,5 22.2 – 22.624,6 – 25,4 3/4" – 14 24.2 – 25.125,1 – 25,4 1" – 14 UNS 23.4 –23.825,6 – 25,9 M26 x 1,5 24.2 – 24.626,2 – 26,4 3/4" – 14 24.1 – 24.726,7 – 26,9 1 1/16" – 12 UN 24.7 – 25.129,6 – 29,9 M30 x 2 27.4 – 27.829,8 – 30,1 1 3/16" – 12 UN 27.9 – 28.329,6 – 29,9 M30 x 1,5 28.2 – 28.629,9 – 30,2 7/8" – 14 27.9 – 28.430,8 – 31,9 1" – 11 1/2" 30.4 – 31.531,6 – 31,9 M32 x 2 29.4 – 29.932,9 – 33,2 1" – 11 30.3 – 30.933,0 – 33,3 1 5/16" – 12 UN 31.0 – 31.535,6 – 35,9 M36 x 2 33.4 – 33.836,2 – 36,5 1 7/16" – 12 UN 34.2 – 34.737,5 – 37,9 1 1/8" – 11 34.9 – 35.637,6 – 37,9 M38 x 1,5 36.2 – 36.639,6 – 40,7 1 1/4" – 11 1/2 39.1 – 40.240,9 – 41,2 1 5/8" – 12 UN 39.0 – 39.441,6 – 41,9 M42 x 2 39.4 – 39.841,6 – 41,9 1 1/4" – 11 39.0 – 39.642,5 – 42,8 1 11/16" – 12 UN 40.6 –41.044,6 – 44,9 M45 x 2 42.4 – 42.844,6 – 44,9 M45 x 1,5 43.2 – 43.645,6 – 46,8 1 1/2" – 11 1/2 45.2 – 46.347,3 – 47,6 1 7/8" – 16 UN 45.9 – 46.347,4 – 47,8 1 1/2" – 11 44.8 – 45.550,5 – 50,8 2" – 12 UN 48.5 – 49.051,6 – 51,9 M52 x 2 49.4 – 49.651,6 – 51,9 M52 x 1,5 50.2 – 50.653,4 – 53,7 1 3/4" – 11 50.8 – 51.457,6 – 58,8 2" – 11 1/2 57.2 – 58.359,3 – 59,6 2" – 11 56.7 – 57.363,1 – 63,4 2 1/2" – 12 UN 61.1 – 61.465,3 – 65,7 2 1/4" – 11 62.8 – 63.469,1 – 70,9 2 1/2" – 8 68.5 – 70.274,8 – 75,2 2 1/2" – 11 72.2 – 72.981,1 – 81,5 2 3/4" – 11 78.6 – 79.284,9 – 86,8 3" – 8 84.3 – 86.187,5 – 87,9 3" – 11 84.9 – 85.699,9 – 100,3 3 1/2" – 11 97.4 – 98.0

112,6 – 113,0 4" – 11 110.1 – 110.7

female paralell thread

fiTTing infoRmaTion HYDRosCanD TeCHniCal infoRmaTion


11

Din/Pn flange Dimensions

According to DIN 2631 PN 6

DND

mmDh mm

Screw holes pcs

Ds mm Screw

10 75 50 4 11 M 1015 80 55 4 11 M 1020 90 65 4 11 M 1025 100 75 4 11 M 1032 120 90 4 14 M 1240 130 100 4 14 M 1250 140 110 4 14 M 1265 160 130 4 14 M 1280 190 150 4 18 M 16

100 210 170 4 18 M 16125 240 200 8 18 M 16150 265 225 8 18 M 16200 320 280 8 18 M 16250 375 335 12 18 M 16300 440 395 12 22 M 20350 490 445 12 22 M 20400 540 495 16 22 M 20500 645 600 20 22 M 20


DND

mmDh mm

Screw holes pcs

Ds mm Screw

80 200 160 4 18 M 16200 340 295 8 22 M 20250 395 350 12 22 M 20300 445 400 12 22 M 20350 505 460 16 22 M 20400 565 515 16 26 M 24500 670 620 20 26 M 24


DND

mmDh mm

Screw holes pcs

Ds mm Screw

10 90 60 4 14 M 1215 95 65 4 14 M 1220 105 75 4 14 M 1225 115 85 4 14 M 1232 140 100 4 18 M 1640 150 110 4 18 M 1650 165 125 4 18 M 1665 185 145 4 18 M 1680 200 160 8 18 M 16

100 220 180 8 18 M 16125 250 210 8 18 M 16150 285 240 8 22 M 20200 340 295 12 22 M 20250 405 355 12 26 M 24300 460 410 12 26 M 24350 520 470 16 26 M 24400 580 525 16 30 M 27500 715 650 20 33 M 30


DND

mmDh mm

Screw holes pcs

Ds mm Screw

200 360 310 12 26 M 24250 425 370 12 30 M 27300 485 430 16 30 M 27350 555 490 16 33 M 30400 620 550 16 36 M 33


DND

mmDh mm

Screw holes pcs

Ds mm Screw

10 90 60 4 14 M 1215 95 65 4 14 M 1220 105 75 4 14 M 1225 115 85 4 14 M 1232 140 100 4 18 M 1640 150 110 4 18 M 1650 165 125 4 18 M 1665 185 145 8 18 M 1680 200 160 8 18 M 16

100 235 190 8 22 M 20125 270 220 8 26 M 24150 300 250 8 26 M 24200 375 320 12 30 M 27250 450 385 12 33 M 30300 515 450 16 33 M 30350 580 510 16 36 M 33

HYDRosCanD TeCHniCal infoRmaTion fiTTing infoRmaTion


sae J518C flange Dimensions

The table above refers to SAE standard SAE J518c.

CODE 61 (3000)Max.(MPa)

Work. press. SizeDim-

ension A BBolt dim. metric

Bolt dim. UNC. D E

34.5 8 1/2” 17.38 38.1 M 8 5/16” 30.18 6.7334.5 12 3/4” 22.23 47.63 M10 3/8” 38.10 6.7334.5 16 1” 26.19 52.37 M10 3/8” 44.45 8.0027.6 20 1 1/4” 30.18 58.72 M10 7/16” 50.80 8.0020.7 24 1 1/2” 35.71 69.85 M12 1/2” 60.33 8.0020.7 32 2” 42.88 77.77 M12 1/2” 71.42 9.5317.2 40 2 1/2” 50.80 88.90 M12 1/2” 84.12 9.5313.8 48 3” 61.93 106.38 M16 1/2” 101.60 9.533.4 56 3 1/2” 69.85 120.65 M16 5/8” 114.30 11.233.4 64 4” 77.77 130.18 M16 5/8” 127.00 11.233.4 80 5” 92.08 152.40 M16 5/8” 152.40 11.23

CODE 62 (6000)Max.(MPa)

Work. press. SizeDim-

ension A BBolt dim. metric

Bolt dim. UNC. D E

41.4 8 1/2” 18.24 40.49 M8 5/16” 31.75 7.7541.4 12 3/4” 23.8 50.8 M10 3/8” 41.28 8.7641.4 16 1” 27.76 57.15 M12 7/16” 47.63 9.5341.4 20 1 1/4” 31.75 66.68 M14 1/2” 53.98 10.2941.4 24 1 1/2” 36.5 79.38 M16 5/8” 63.5 12.5741.4 32 2” 44.45 96.82 M20 3/4” 79.38 12.57



11

sealing PRinCiPles

Din 3852-2Design b

iso 1179-4

Din 3852-11Design e

iso 1179-2

iso 1179-3Design H

Thread Thread

ThreadThread

iso 1179-4Design g

TigHTening ToRque foR ConneCTion enD

NOTE!Thefollowingtighteningtorquecannotbeappliedonthecuttingringconnection,seetheassemblinginstructionsinchapter6.Neithercanitbeappliedonbanjofittingsorconicalthreadedfittings.

BSP Tread

Torque (Nm) form B

Torque (Nm) form E,H,G

Metric Thread

Torque (Nm) form B

Torque (Nm) form E,H,G

UN/UNF Thread

Torque (Nm)

G 1/8" 20 M 10x1.0 20G 1/8" 20 20 M 10x1.0 20 20 7/16"-20 UNF 20G 1/4" 45 45 M 12x1.5 30 30 1/2"-20 UNF 25

M 14x1.5 45 45G 3/8" 70 70 M 16x1.5 60 55 9/16"-18 UNF 30G 1/2" 130 85 M 18x1.5 80 70 3/4"-16 UNF 45G 1/2" 130 85 M 22x1.5 130 120G 3/4" 170 170 M 26x1.5 180 170 1 1/16"-12 UN 85

G 1" 330 330 1 5/16"-12 UN 130G 1 1/4" 510 430 M 42x2.0 470 430 1 5/16"-12 UN 170G 1 1/2" 600 510 M 48x2.0 600 510 1 7/8"-12 UN 180

M 14x1.5 55 55M 20x1.5 150 105

7/8"-14 UNF 55M 27x2.0 200 170M 33x2.0 390 330

HYDRosCanD TeCHniCal infoRmaTion fiTTing infoRmaTion


Source: HS Testlabb

Note!Allthetighteningtorquesarebasedon"dry"tightening(non-lubricated).Thereisariskforover-tighteningifthesametorqueisusedforlubricatedfittings.ThisisespeciallyimportantforJICinsmalldimensions.Forthese,theFFWR-methodisrecommended(seechapter7:7).

ORFS JICHosefittings BSP 60° cone

Thread size

Tightening Nm

FFWR new

FFWR reassembly Hose dim. Thread

FFWR hose

FFWR pipe

Thread size

Tightening Nm

9/16” – 18 25 1/2–3/4 1/4–1/2 3/16 7/16"–20 UNF 2 2 1/8" 2011/16” – 16 35 1/2–3/4 1/4–1/2 1/2"–20 UNF 2 2 1/4" 2513/16 – 16 55 1/2–3/4 1/4–1/2 1/4 9/16"–18 UNF 2 1 1/2 3/8" 40

1” – 14 80 1/2–3/4 1/4–1/2 3/8 3/4"–16 UNF 2 1 1/2 1/2" 601 3/16” – 12 120 1/3–1/2 1/4–1/2 1/2 7/8"–14 UNF 1 1/2 1 1/2 5/8" 701 7/16” – 12 150 1/3–1/2 1/4–1/2 3/4 1.1/16"–12 UN 1 1 1/4 3/4" 115

1 11/16” – 12 180 1/3–1/2 1/4–1/2 1 1.5/16"–12 UN 1 1 1" 1402” – 12 220 1/3–1/2 1/4–1/2 1 1/4 1.5/8"–12 UN 1 1 1 1/4" 200

2 1/2"– 12 490 1/3–1/2 1/4–1/2 1 1/2 1.7/8"–12 UN 1 12 2.1/2"–12 UN 1 1 1 1/2" 270

2" 350

DKLO DKSO

Pipe size Thread Nm Pipe size Thread Nm6L M12 x 1.5 23 6S M14 x 1.5 268L M14 x 1.5 26 8S M16 x 1.5 30

10L M16 x 1.5 30 10S M18 x 1.5 4112L M18 x 1.5 41 12S M20 x 1.5 5315L M22 x 1.5 76 14S M22 x 1.5 7618L M26 x 1.5 106 16S M24 x 1.5 8822L M30 x 2.0 116 20S M30 x 2.0 11628L M36 x 2.0 133 25S M36 x 2.0 13335L M45 x 2.0 173 30S M42 x 2.0 15142L M52 x 2.0 202 38S M52 x 2.0 202

TigHTening ToRque foR swiVel nuTs on Hose fiTTings anD aDaPToRs



11

VaCuum TRansfoRmaTion Table

ATM PSIWater meter

Quicksilver mm %

0.1 1.4 1 73.6 10

0.2 2.8 2 147.1 20

0.3 4.2 3 220.7 30

0.4 5.7 4 249.2 40

0.5 7.1 5 267.8 50

0.6 8.5 6 441.3 60

0.7 10.0 7 514.9 70

0.8 11.4 8 588.4 80

0.9 12.8 9 662.0 90

1.0 14.2 10 735.5 100

PRessuRe TRansfoRmaTion Table

BAR MPa Kp / cm² PSI Kpa

1 0.1 1.020 14.503 100

10 1 10.20 145.03 1000

0.9810 0.0981 1 14.233 10

0.0690 0.0069 0.0700 1 6.9

0.01 0.001 0.0102 0.145 1

mm Inche Foot

1 0.0394 0.0033

25.4 1 0.083

304.8 12 1

HYDRosCanD TeCHniCal infoRmaTion TRansfoRmaTion Tables


Based on 20 CS at 50°C

Hose PRessuRe DRoP

PRessuRe DRoP Tables HYDRosCanD TeCHniCal infoRmaTion


11

Hose fiTTings

Tryc

kfall (

MPa)

0,03

0,0225

0,015

0,0075

Flöde (liter/min)0 25 50 75 100

1/4” 3/8” 1/2”

5/8”

3/4”

1”

straight fittingsMineral oilViscosity: 20CentistokesTemperature: 50°C

90° Pipe bendMineral oilViscosity: 20CentistokesTemperature: 50°C

90° Tight bendMineral oilViscosity: 20CentistokesTemperature: 50°C

Pres

sure

Dro

p (M

Pa)

Pres

sure

Dro

p (M

Pa)

Pres

sure

Dro

p (M

Pa)

Flow (litres/min)

Flow (litres/min)

Flow (litres/min)

HYDRosCanD TeCHniCal infoRmaTion PRessuRe DRoP Tables


Mineral oilViscosity: 80Centistokes

iso a 1/4" – 1/2" iso a 3/4" – 1"

quiCk Release fiTTings

0,2

0,1

0 40 50 60

Pres

sure

Dro

p (M

Pa)

Flow (litres/min)pr

essu

re D

rop (

mpa)

Flow (litres/min)

Hansen Design HkP water

Pres

sure

Dro

p (M

Pa)

Flow (litres/min)

Mineral oil According to MIL-H 5606 Temperature: 38°C

brunning ff 370 brunning ff 500 & 750

Pres

sure

Dro

p (M

Pa)

pres

sure

Dro

p (mp

a)

Flow (litres/min)Flow (litres/min)



11


Tema T-seriesPr

essu

re D

rop

(Bar

)

Pres

sure

Dro

p (B

ar)

Pres

sure

Dro

p (B

ar)

Pres

sure

Dro

p (B

ar)

Pres

sure

Dro

p (B

ar)

Pres

sure

Dro

p (B

ar)

Pres

sure

Dro

p (B

ar)

Pres

sure

Dro

p (B

ar)




Flow (litres/min) Flow (litres/min)

Viscosity 32cSt at 40°CaccordingtoISO7241-2:2000



fasTeR – nVMineral oilViscosity: 20CentistokesTemperature:50°C

fasTeR – PVMineral oilViscosity: 20CentistokesTemperature:50°C

fasTeR – VVMineral oilViscosity: 20CentistokesTemperature:50°C

fasTeR – ffnMineral oilViscosity: 20CentistokesTemperature:50°C

Pres

sure

Dro

p (M

Pa)

Pres

sure

Dro

p (M

Pa)

Pres

sure

Dro

p (M

Pa)

Pres

sure

Dro

p (M

Pa)






11

fasTeR – PVVmMineral oilViscosity: 20CentistokesTemperature:50°C

fasTeR – non-return valveMineral oilViscosity: 20CentistokesTemperature:50°C

fasTeR – HnVMineral oilViscosity: 20CentistokesTemperature:50°C

fasTeR – ffVMineral oilViscosity: 20CentistokesTemperature:50°C

Pres

sure

Dro

p (M

Pa)

Pres

sure

Dro

p (M

Pa)

Pres

sure

Dro

p (M

Pa)

Pres

sure

Dro

p (M

Pa)





PiPe ClamPs

Recommended distance between pipe clamps

Sta

ndar

d se

ries

Dou

ble

series

Clamp type PIPE DIMENSION [mm] DISTANCE L [m]

Group 1 6 – 13.25 0.9

Group 2 6 – 13.25 1.0

Group 3 14 –18 1.2

Group 4 20 – 25.4 1.5

Group 5 28 – 32 1.5

Group 6 32 – 45 2.2

Group 7 45 – 54 2.7

Group 8 57.2 – 76.1 3.2

Group 9 88.9 – 102 4.0

Hea

vy s

erie

s

Group 1 6 – 20 1.0

Group 2 20 – 30 1.5

Group 3 30 – 45 2.2

Group 4 38 – 50 2.2

Group 4 53 – 70 3.0

Group 5 65 – 73 3.0

Group 5 80 – 90 3.5

Group 6 100 – 121 4.5

Group 7 133 – 168 5.0

Group 8 168 – 219 6.0

Group 9 166 – 220 6.7

The clamp is assembled close to a pipe bend.

PiPe ClamPs HYDRosCanD TeCHniCal infoRmaTion


11

HYDRosCanD auTomoTiVe ab

we assemble anD DisTRibuTe Hoses anD fluiD ConneCToRs foR THe auTomoTiVe inDusTRY, To ComPanY´s like:

VolVo PenTa

VolVo bus

DeuTz ag

RenaulT .V.i

VolVo PoweRTRain

maCk TRuCks inC

aTleT ab

Hydroscand Automotive ABRuskvädersgatan 8418 34 GöteborgPho: +46 (0)31-64 63 90Fax: +46 (0)31-53 38 23www.hydroscand-automotive.se

Documents

Hydroscand catalogue.pdf