Upload
vandiep
View
215
Download
0
Embed Size (px)
Citation preview
6160
248
200
HydraulicPumpsandDirectionalValves
Enerpac hydraulic pumps are available
in over 1000 different configurations.
Whatever your high-pressure pump
needs are... speed, control, intermittent
or heavy duty cycle you will find an
Enerpac pump suited to the application.
FeaturingHand,Battery,Electric,Airand
Gasoline powered models, with multiple
reservoir and valve configurations,
Enerpac offers the most comprehensive
pump line available.
PumpSelection
For help in selecting the correct pump for your application, please review our ‘YellowPages’.
If you require further assistance, contact the Enerpac office located near you.
Page:
TorqueWrenchPumps
System matched air and electric pumps provide control to operate Enerpac Torque Wrenches.
Page:
6160 www.enerpac.com
▶
▶▶▶
▶
▶
▶
▶
▶
▶▶▶
▶
▶
▶▶▶
▶
▶
▶
▶
2,5
7,4 3,3–
0,5
1,0
2,0
3,8
5,5
4040150
2,0
5,0
1,38,040,0
40,0
40,0
8,0
2,50
4,759,5021,8
2,47
2,49
0,25
0,32
0,27
1,02,734,20
0,25
0,16
0,130,151,31
1,64
3,30
0,66
–
–
–
–
–
0,37
0,37
0,37
1,255,6011
991
340
2555102840
4,8
9,7
2,2
P
PPMP
P
P11XC
PU
PE
ZUZESFP
XA
PAT
PAPAMZA
ZG5
ZG6
PGM
VM, VCVE
62
646668
69
70
72
74
76
828894
96
98
100101102
104
106
107
108
PumpsandDirectionalValvesSectionOverviewPower Source
MaximumReservoirCapacity
(litres)
Max. Power
Consumption
Pump Types Series Page
Man
ual
Ele
ctri
cA
irG
asol
ine
Max. Flowat Rated Pressure
(l/min)
(cm3/stroke)
(cm3/stroke)
(cm3/stroke)
(cm3/stroke)
(kW)
(kW)
(kW)
(kW)
(kW)
(l/min)
(l/min)
(kW)
(kW)
(kW)
Lightweight Hand Pumps
Exclusively from Enerpac
ULTIMA Steel Hand Pumps
Low Pressure Hand Pumps
Multifluid Hand Pumps
Pumping Fluids up to 1000 bar
Foot Pump
For Hands Free Operation
Ultra-High Pressure Hand Pumps
Pressure up to 2800 bar
Battery Powered Hydraulic Pumps
Cordless Hydraulic Power
Economy Series
Compact and Portable
Submerged Series
Powerful and Low-Noise
Z-Class Pumps, Portable
Z-Class Pumps, Heavy-Duty
Split Flow Pumps
Multiple outlets with equal oil flow
XA-Series Pumps, with XVARI® Technology
For Productivity and Ergonomics
Turbo II Air Hydraulic Pumps
Compact Air Over Hydraulic
Air Hydraulic Pumps
Single and Twin-Air Motor
Z-Class Air Hydraulic Pumps
Modular Air Pumps
Z-Class Gasoline Hydraulic PumpsGas Powered High Flow Pumps
Z-Class Gasoline Hydraulic PumpsGas Powered High Flow Pumps
Atlas PGM-SeriesSmall and Lightweight
Directional Control Valves
(kW)
(l/min)
(l/min)
(l/min)
6362
▼
327901327901901
25402540
--
1313132727
700700700700700700700
--
3,623,62
11,2639,3339,33
0,902,470,900,902,472,472,47
P-141P-391P-142*P-202P-392*P-802P-842
32,738,635,428,642,243,143,1
255
248
PC-20PC-25
56
P-Series,LightweightHandPumps
• Lightweightandcompactdesign• Durableglass-fillednylonreservoirandnylon
encapsulated aluminium pump base for maximum corrosion resistance
• Two-speedoperationreduceshandlestrokesby as much as 78% over single speed pumps
• Lowerhandleefforttominimizeoperatorfatigue• Integral4-wayvalveonP-842foroperationofdouble-
acting cylinders• Handlelockandlightweightconstructionforeasycarrying• Largeoilcapacitiestopowerawiderangeofcylinders
or tools• Non-conductivefiberglasshandleforoperatorsafety• Internalpressurereliefvalveforoverloadprotection.
Shown from top to bottom: P-802,P-842,P-202,P-142
Single-Speed
Two-Speed
Usable OilCapacity
(cm3)
PumpType
Pressure Rating **
(bar)
ModelNumber
Oil Displacementper Stroke
(cm3)
Exclusively from Enerpac
Max.HandleEffort
(kg)
* Available as set, see note on next page.** Contact Enerpac for applications where operating pressure is less than 10% of pressure rating.
▼ Cylinder-pump set SCR-254H used to support the construction while monitoring pressure and load with the gauge.
TankKits:
When a return-to-tank port is required, the Tank Kits provide a 7/16"-20 UN port at the rear of the reservoir.
1st stage 1st stage2nd stage 2nd stage
Speed Chart
To determine how a specific pump will operate your cylinder,
see the Pump-Cylinder Speed Chart in the ‘Yellow Pages’.
Page:
Cylinder Matching Chart
For help in selecting the correct hand pump for your application,
please refer to the Cylinder Matching Chart located in the ‘Yellow Pages’.
Page:
Fits P-141, P-142Fits P-202, P-391, P-392
HighTemperatureand Corrosion Resistant HandPumps
The P-142 and P-392 hand pumps are available with
Viton® seals, stainless steel pistons and anodized aluminium reservoir for use in extreme environments.
Page:
6362 www.enerpac.com
336533336509533552552
P-141P-391P-142*P-202P-392*P-802P-842
28362836364545
8599858599133133
28332828333520
¼”-18 nPTF
⅜”-18 nPTF
¼”-18 nPTF
¼”-18 nPTF
⅜”-18 nPTF
⅜”-18 nPTF
⅜”-18 nPTF
319522319400522527527
19301919303030
143177143144177228228
–16–
1616––
951209595
120181181
80–
80––
153153
7–7––
1010
–––––
3536
185344185344344337337
12,725,412,712,725,425,425,4
2,44,12,43,44,18,2
10,0
116
58
124
69P-842
P-802
P-141,P-142,P-202,P-391,P-392
A B C D E G H J L M N P SQ
P-802
LightweightHandPumps
PistonStroke
(mm)
(kg)
ModelNumber
FootPumpP-392FP
For handsfree operation the lightweight and robust P-392FP Foot Pump is the perfect choice.
Hoses
Enerpac offers a complete line of high quality hydraulic hoses. To ensure the integrity of your system, specify only genuine Enerpac hydraulic hoses.
Page:
P Series
Reservoir Capacity:
327 - 2540 cm3
Flow at Rated Pressure:
0,90 - 2,47 cm3/strokeOperating Pressure:
700 bar
Dimensions (mm)
Release valve
Valve Control
Release Valve
Pump-CylinderSets
All pumps marked with an * are available as sets
(pump, cylinder, gauge, couplers and hose) for your ordering convenience.
Page:
Gauges
Minimize the risk of over-loading and ensure long, dependable service from your equipment. Refer to the
System Components section for a full range of gauges.
Page:
Page:
6564
▼
-343434341414
-16,3916,3916,3916,39
126,20126,20
P-39P-77P-80*P-801P-84P-462P-464
39403535354949
770770
22004100220074237423
2,462,462,462,462,464,754,75
700700700700700700700
124
250
P-Series,ULTIMASteelHandPumps
• Reducedhandleeffortandergonomicgripforlessoperator fatigue
• Two-speedoperationforfastandeasyoperation (exceptP-39)
• Ventfreereservoireliminatesspills• Quickgriphandleallowsforeasytransport• Integralreservoirover-pressurizationprotection• Allsteelconstruction,chromeplatedplungerandwiper
system for durable, long lasting performance• 4-wayvalvingontheP-84andP-464foroperationof
double-acting cylinders.
Shown from left to right: P-77,P-80,P-84,P-801,P-39
Two-Speed
Single
Usable Oil
Capacity
(cm3)
PumpType
Pressure Rating **
(bar)
Model Number
Oil Displacementper Stroke
(cm3)
Max.HandleEffort
(kg)
▼ In the absence of a power supply, the P-80 Hand Pump offers a powerful solution.
1st stage 1st stage2nd stage 2nd stage
The Solution for Tough Jobs
TwoSpeedPumps
Recommended for applications where cylinder plunger must advance rapidly to load
contact, and applications where greater oil capacities are required, such as multiple cylinder hook-ups.
* Available as a set, see note on next page.** Contact Enerpac for applications where operating pressure is less than 10% of pressure rating.
Gauges
Minimize the risk of over-loading and ensure long, dependable service from your equipment. Refer to the
System Components section for a full range of gauges.
Page:
4-WayControlValve
P-84 and P-464 feature a manual 4-way control valve, designed for use with one double-acting or two
single-acting cylinders. For system set-up information:
Page:
FootPump ConversionKits
Convert your P-39, P-77, P-80 or P-801 to foot power with the PC-11Kit. Includes
instructions for easy conversion.
6564 www.enerpac.com
P-39P-77P-80*P-801P-84P-462P-464
480487511511510308308
3030303030163163
3535353535320320
3747555555195195
4164244604604602525
140140150150150650650
––––
70––
550550579579579671671
163163195195195270270
–––––
175175
1111111211211219292
––
424238–
89
––––––
68
8,48,48,48,48,48080
––
747474––
383391428428428210210
6,27,1
10,714,111,827,727,7
25,425,425,425,425,438,138,1
58
248
P-80,P-801,P-84
P-462,P-464
P-39,P-77
A B C D E F H J L M N P Q R S T
ULTIMASteelHandPumps
P Series
Reservoir Capacity:
770 - 7423 cm3
Flow at Rated Pressure:
2,46 - 4,75 cm3/strokeMaximum Operating Pressure:
700 bar
PistonStroke
(mm) (kg)
ModelNumber
Dimensions (mm)
Pump-CylinderSets
The P-80 is also available as set (pump, cylinder, gauge, couplers and hose) for your ordering convenience.
Page:
Cylinder Matching Chart
For help in selecting the correct hand pump for your application,
please refer to the Cylinder Matching Chart located in the ‘Yellow Pages’.
Page:
P-84 only
Extra Capacity HandPumps
P-462 and P-464 feature extra large reservoirs and high first-stage flow rate.
These pumps are ideally suited for powering high-capacity cylinders.
6766
▼
116
P-18P-25P-50P-51
16272727
36032773277819
2,469,504,754,10
124
200175350200
Hoses
Enerpac offers a complete line of high quality hydraulic hoses. To ensure the integrity of your system,
specify only genuine Enerpac hydraulic hoses.
Page:
P-Series,LowPressureHandPumpsShown from left to right: P-25,P-51,P-18
Gauges
Minimize the risk of over-loading and ensure long, dependable service from your equipment. Refer to the
System Components section for a full range of gauges.
Page:
• P-25andP-50pumpoilinbothforwardandreversehandle movement improving overall efficiency, ideal when mounting space is restricted
• Externalload-releasevalve• Internalpressure-reliefvalveforoverloadprotection• P-51canbeoperatedinhorizontalandverticalposition
with pump head and oil outlet facing downwards.
Max.HandleEffort
(kg)
Single-Speed
PumpType
Usable Oil
Capacity
(cm3)
Model Number
Pressure Rating
(bar)
Oil Displace ment
per Stroke
(cm3)
▼ P-18 hand pump used for locking the rotating table for marble polishing.
When Less Than 700 Bar is All You Need
6766 www.enerpac.com
P-18P-25P-50P-51
22115215252
31617317392
30152152181
35240240200
37––
57
385––
610
254––
29
163684684160
–200200129
140–––
8,410109
5,016,316,85,4
25,438,138,125,4
SNMLJHEDCBA
P-18
P-25,P-50
P-51
68
LowPressureHandPumps
P Series
Reservoir Capacity:
360 - 3277 cm3
Flow at Rated Pressure:
2,46 - 9,50 cm3/strokeMaximum Operating Pressure:
175 - 350 bar
Dimensions (mm)
(kg)
Model Number
PistonStroke
(mm)
MP-Series MultifluidHandPumps
Corrosion resistant hand pumps for low pressure filling and high pressure testing applications, suitable for a wide range of fluids.
Page:
▼ P-51 hand pumps used with RC-series cylinders to keep wooden layers under pressure during lamination of plates.
6968
▼
MP-110MP-350MP-700MP-1000
45454545
21,87,83,12,2
35353535
52,652,652,652,6
1103507001000 MP-10T
****
6,66,66,66,6
26,526,526,526,5
MP-Series,MultifluidHandPumpsShown: MP-110
• Unbeatablecorrosionresistance• StandardsuppliedwithNitrileseals–canbeusedfora
wide range of fluids such as demineralised water, oil/wateremulsions,waterglycols,mineraloils
• Twospeedpumpsupto1000barpressure• BunaNitrilesealscanbeexchangedwithoptional EPDMsealforusewithSkydrolorbrakefluids
• Impregnatedaluminiumanodizedpumphousingwithstainless steel internal pumping components
• Externallyadjustablepressurereliefvalve• 1/4"NPTFgaugeport.
Max.HandleEffort
(kg)
Note: MP-Pump includes 1,5 mm thick gasket for reservoir mounting.1) MP-Series pumps requires the use of an external reservoir.
TwoSpeed
PumpType
Usable Oil
Capacity 1)
(cm3)
Model Number
Pressure Rating(bar)
Oil Displace ment per Stroke
(cm3)1st
stage2nd
stage1st
stage2nd
stage
MultifluidPumpApplications
• Fillingandtestingofaircraft systems as shock absorbers
• TestingofaircraftsystemsusingSkydrol fluid
• Testingofpressurevessels• Operationofsingle-actinghydraulic
tools and cylinders.
topview
MP-110,350,700,1000① Suction / Tank return port 3/8”-18 NPTF② Pressure port 3/8”-18 NPTF③ Gauge port 1/4”-18 NPTF
(kg)
OptionalReservoirKit
Includes 10 litres tank with skid frame, top plate
with reservoir seal, suction pipe and mounting bolts. Useable oil capacity is 7,4 litres. Order model number: MP-10T.
PistonStroke
(mm)
MP SeriesFlow at Rated Pressure:
2,2 - 21,8 cm3/strokeMaximum Operating Pressure:
110 - 1000 bar
6968 www.enerpac.com
▼
58
116
P-392FP* 422,4715 11,26700492 7,025,4
LightweightHydraulicFootPump
P Series
Reservoir Capacity:
492 cm3
Flow at Rated Pressure:
2,47 cm3/strokeMaximum Operating Pressure:
700 bar
Pump-CylinderSets
The P-392FP is available as set
(pump, cylinder, gauge, couplers and hose) for your ordering convenience.
Page:
ReleaseValve
Hoses
Enerpac offers a complete line of high quality hydraulic hoses. To ensure the integrity of your system, specify only genuine Enerpac hydraulic hoses.
Page:
Shown: P-392FP
• Robust,durableandcompact - Steel frame for maximum stability - Steel pumping handle - Aluminium reservoir
• Footpedallockandlightweightconstructionfor easy carrying
• Two-speedoperationreducesfootpedalstrokes• Largefoot-padreleasevalveforcontrollingloaddescent• Internalpressurereliefvalveforoverloadprotection.
Max.HandleEffort
(kg)
* Available as set, see note on this page.
Usable Oil
Capacity
(cm3)
Model Number
Pressure Rating(bar)
Oil Displace ment per Stroke
(cm3)1st
stage2nd
stage1st
stage2nd
stage (kg)
PistonStroke
(mm)
▼ P-392FP offers the advantage of hands free operation to handle and control the tool or cylinder.
7170
▼
983737737
2800700
2800
13- -
16,22--
0,612,490,62
P-228211-10011-400
48,154,454,4
126
Cone Seal
Stainless Steel High Pressure fittings seal on a ‘cone’ surface and do not require pipe sealer. The Gland Nut holds the sleeve and tubing tight against the cone surface to provide a 2800 bar seal.
• Two-speedoperationontheP-2282allowsforfasterfilloperation,reducingcycletimesformanytestingapplications
• 303Stainlesssteelconstructiononthe11-100and11-400modelsenableusewithmanydifferentfluids,suchasdistilledwater,diesters,silicones,solubleoilsandpetroleum
• Largereleaseknobforimprovedcontrolofpressurerelease• Outletportsare¾"-16conefor2800barrating• Ultra-highpressurefittingsfeatureallstainlesssteelconstructionexceptadaptor41-366whichfeaturesnickelplatedcarbonsteelconstruction.
Shown from left to right: 11-100,P-2282
Ultra-HighPressureHandPumps
Two-Speed
Single-Speed
Usable Oil
Capacity
(cm3)
PumpType
PressureRating *
(bar)
ModelNumber
Oil Displacementper Stroke
(cm3)
Max.HandleEffort
(kg)1st
stage1st
stage2nd
stage2nd
stage
Sleeve
Stainless Steel Tubing
Body
Bleed HoleGland Nut
2-WayShut-OffValve ModelNr.72-750
For 2800 bar applications requiring a shut-off valve or gauge snubber.
Made of 318 Stainless Steel and utilizing .38 inch cone fittings, it is the perfect selection for use with your ultra-high pressure hand pump.
TestSystemGauges
Ideal for monitoring pressure in your hydraulic circuit. Test System Gauges, such as the T6010L, are available
with cone threads or NPTF threads and a variety of pressure ranges.
Ultra-HighPressureupto2800bar
▲ Typical Test System
* Contact Enerpac for applications where operating pressure is less than 10% of operating pressure.
Page:
To system
7170 www.enerpac.com
P-228211-10011-400
25,419,819,8
344240240
558266266
35151151
–177177
314545
133––
527635635
29162162
228114114
7237237
120314314
–77
–99
6,410,010,0
43-001
43-200
43-300
43-301
83-011
43-400
43-600
43-701
45-11645-12645-136
41-146
41-166
41-246
41-266
41-366
P-2282
11-100, 11-400
A B C D E F H J L M N S T
.38" cone
.38" cone
.38" cone
.38" cone side/ .25" cone gauge port
.38" cone side/ .25" cone gauge port
.38" cone
.38" cone
.38" cone
100 mm tube, O .D . .38" *200 mm tube, O .D . .38" *300 mm tube, O .D . .38" *
.38" F cone to ¼" M NPTF
.38" F cone to ⅜" M NPTF
.38" F cone to ¼" F NPTF
.38" F cone to ⅜" F NPTF
.38" M cone to ⅜" F NPTF
Model Nr.
Ultra-HighPressureHandPumps
PistonStroke
(mm)
ModelNumber
(kg)
Gland Nut Plug
Elbow
Tee
Gauge Tee
Gauge Adaptor
Coupling
Cross
Gland Nut with Sleeve
Tubing
▼ OptionalUltra-HighPressureFittingsandTubings
ConnectionDescription P11Series
Reservoir Capacity:
737 - 983 cm3
Flow at Rated Pressure:
0,61 - 2,49 cm3/strokeMaximum Operating Pressure:
700 - 2800 bar
700 bar onlyAdaptor
Adaptor
Adaptor
Dimensions (mm)
Note: .25" cone fittings use 9/16"-18 threads, ⅜" cone fittings use ¾"-16 threads .* Actual tubing lengths are 19 mm less than nominal size shown . These dimensions make distance between centers of valves and fittings multiples of 100 mm spaces .
2800 bar
Optional T-Series gauge and fitting
Release Valve
Ultra-HighPressurepumpsDONOThaveaninternalsafety pressure relief valve.
7372
▼
124
XC-115VCXC-230VC
121
Shown: XC-1201ME
Page:
XC-Series,CordlessHydraulicPumps
PerformanceofaPoweredPumpPortabilityof aHandPump
• Lightweightdesignwithintegratedhandleandcarryingstrap for portability
• Bladderreservoirpreventscontaminationandallowspump usage in any position
• Powerful0,37kWmotorand28VoltLithium-Ionbatterydeliver exceptional speed and run time
• High-strengthfiberglassreinforcedcompositeshroudforsuperior durability in demanding job site environments
• Cordlesstechnologyeliminatestrippinghazardsfoundinother powered pumps.
◀ Power and simplicity for the toughest jobs.
28-VoltBattery
The XC-28V with Lithium-Ion technology for maximum battery performance.
Battery Charger
1-hour quick charger.
Battery packs contain no cadmium, so they are environmentally friendly. Enerpac encourages recycling.
3/8"SwivelConnector
360 degree swivel coupler for optimal orientation of the hydraulic connection on
cylinders, pumps and hoses. Order Model Nr. XSC-1.
115 VAC230 VAC
Model Nr. Voltage
G2535L Gauge
Use gauge to check system pressure. Use gauge adaptor GA-3 for easy mounting.
Page:
7372 www.enerpac.com
XC-1201MBXC-1202MBXC-1201ME *XC-1202ME *
2,02,02,02,0
10111011
0,50 0,50 0,50 0,50
0,250,250,250,25
115115230230
1,02,01,02,0
OILFLOWvs.PRESSURE
XC Series
Reservoir Capacity:
1,0 - 2,0 litresFlow at Rated Pressure:
0,25l/minMaximum Operating Pressure:
700 bar
OilFlow(l
/min
) ▶
Pressure (bar) ▶
CordlessHydraulicPumps
XC-Series Cordless HydraulicPumps
The XC-Series cordless pump is ideal for jobs
using small to medium size cylinders and hydraulic tools, and is compatible with over 140 Enerpac tools and cylinders.
These cordless pumps combine the performance of a powered pump with the portability of a hand pump making them a perfect solution for remote applications with limited or no access to a power supply or for locations where corded solutions present trip hazards.
The Lithium-Ion battery provides superiorruntime:
• 250cutsof10mmreinforcingbarusing a WHC-750 cutter
• >100liftswithaWR-5spreaderup to maximum load
• 45splitsonM27-8.8nutsusinga NC-3241 nut cutter
• 30timesliftingwithaRC-104cylinder (10 ton, 100 mm stroke).
Note: Actual number of cycles per charge will vary depending on condition of battery, tool and ambient conditions.
The XC-Series cordless pump is CSA and CE compliant.
▼ Take the battery pump anywhere without power cords or air hoses.
Useable Oil
Capacity
Output Flow Rate
(l/min)
Valve Function **
ChargerVoltage
No Load
▼ SELECTIONCHART
Model Number
① Outlet "Advance" Port ⅜"-18 NPTF
② Oil Fill (must use funnel)
③ User Adjustable Relief Valve Access Port
④ Directional Control Valve
⑤ Shoulder Strap Connection Points
⑥ Safety Lock Feature
⑦ On/Off Switch
3-way, 2-pos.3-way, 2-pos.3-way, 2-pos.3-way, 2-pos.
(litres) (VAC)
* Batteries and charger not included.** For use with single-acting cylinders or tools.
140 bar 700 bar (kg)
7574
▼
1,93,81,93,81,93,81,93,8
1313131313131313
700700700700700700700700
PUD-1100EPUD-1101EPUJ-1200EPUJ-1201EPUD-1300EPUD-1301EPUJ-1400EPUJ-1401E
124
255
116
Gauges
Minimize the risk of overloading and ensure long, dependable service from your equipment. For use with
the Economy pump the G-2535L gauge and GA-3 gauge adaptor are suggested.
For a full range of gauges, please refer to the System Components section.
PU-Series,EconomyElectricPumps
• Lightweightandcompactdesign:11,8to18,6kg• Largeeasy-carryhandleformaximumportability• Two-speedoperationreducescycletimes
for improved productivity • 230VAC50/60-cycleuniversalmotorwilloperate
under poor voltage supply• 24VACremote motor control, 3 m length for
operator safety• Startsunderfullload• Highstrengthmoldedshroud,withintegralhandle,
protects motor from contamination and damage.
Shown: PUJ-1200E
Single-Acting
Double- Acting
Usable Oil
Capacity
(litres)
PumpType
(Used with cylinder)
Pressure Rating(bar)
ModelNumber *
1st
stage
Page:
* For 115 volt applications replace ’E’ suffix with ’B’.** Electric dump valve for auto-retract of cylinders.
Hoses
Enerpac offers a complete line of high quality hydraulic hoses. To ensure the integrity of your system, specify only genuine Enerpac hydraulic hoses.
Speed Chart
To determine how a specific pump will operate your cylinder,
see the Pump-Cylinder Speed Chart in the ‘Yellow Pages’.
Page:
HeavyonPerformance, Light on Weight
Page:
2nd
stage
7574 www.enerpac.com
PUD-1100EPUD-1101EPUJ-1200EPUJ-1201EPUD-1300EPUD-1301EPUJ-1400EPUJ-1401E
362373362373362373362373
133142133142133142133142
244368244368244368244368
244309244309244309244309
101105101105101105101105
119130119130119130119130
203323203323203323203323
11,817,210,015,412,017,513,218,6
8585858585858585
230230230230230230230230
3,23,23,23,23,23,23,23,2
3,313,313,313,313,313,313,313,31
0,320,320,320,320,320,320,320,32
245
FEDCBA J
EconomyElectricPumps
ValveType
Output Flow Rate
(I/min)
(kg)
CurrentDraw
(Amps)
ModelNumber *
Dump**
SoundLevel
(dBA)
MotorVoltage
(VAC)1st
stage
PU Series
Reservoir Capacity:
1,9 - 3,8 litresFlow at Rated Pressure:
0,32l/minMotor Size:
0,37 kWMaximum Operating Pressure:
700 bar
Dimensions (mm)
AbouttheEconomyPump
The Economy pump is best suited to power small to medium size cylinders or
hydraulic tools. Its lightweight and compact design make it ideal for applications which require easy transport of the pump. The universal motor works well on long extension cords or generator-driven electrical power supplies.
For further application assistance refer to the ‘Yellow Pages’.
PUD-1100Series
• Provides advance-retract of single-acting cylinders
• Ideal for punching applications• For applications not requiring load
holding• 3 m pendant controls motor and
valve operation.
PUD-1300Series
• Provides advance-hold-retract of single-acting cylinders
• Ideal for applications requiring load-holding
• For applications requiring remote valve operations
• 3 m pendant controls motor and valve operation.
PUJSeries
• Manual valves provide advance-hold-retract tool operation
• Available with 3- and 4-way valves for single or double-acting cylinders
• 3 m pendant controls the motor operation.
OILFLOWVERSUSPRESSUREOilFlow
(l/m
in)
▶
Pressure(bar) ▶
Page:
2nd
stage
Valve Function
3/2 manual
3/2 solenoid
4/3 manual
Advance/Retract
Advance/ Hold/Retract
Advance/ Hold/Retract
Advance/ Hold/Retract
① Oil Outlet Port② Tank Port③ Gauge Port (PUJ-1200 and PUJ-1201 models only)
7776
▼
PE-Series,SubmergedElectricPumps
• Two-speedoperationreducescycletimesforimproved productivity
• Powerful0,37kWinductionmotorissubmergedintheoil reservoir to run cooler, protect the motor, simplify the pump interface, save space and reduce noise
• Large5,5litresreservoirallowsoperationofawiderange of cylinders
• 24VDCremotependantcontroloncertainmodelsforsafer operation
• Externallyadjustablereliefvalveallowscontrolofoperating pressure without opening the pump
• 40-microninternalreturnlinefilterkeepsoilclean,promoting longer pump life
• Fulllengthsidetubeforeasymonitoringofoillevel.
Shown: PEJ-1401E
PED Series: with Dump Valve
•Idealforpunching,crimpingandcutting•Forusewhenloadholdingisnotrequired•Controlpendantwith3mcordcontrols
valve and motor
5 BASIC PUMP TYPES
Select the model that suits your application . For special requirements see page 79 or contact your Enerpac office .
PEM Series: with Manual Valve
•Idealchoiceformostapplications•Manualvalvecontrol,forbothsingle-acting
and double-acting applications•Manualmotorcontrol
PER Series: with Solenoid Valve
•Idealforproductionandlifting•Allvalvesare3positionfor
Advance-Hold-Retract•Controlpendantwith3mcordfor
remote valve operation
PEJ Series: with Remote Jog
• Forlightproductionandliftingapplications• Manualvalvecontrolforsingle-actingor
double-acting cylinders• Controlpendantwith3mcordforremote
motor operation
PES Series: with Pressure Switch
•Designedforcontinuouspressureapplications,such as clamping, workholding and testing
•Allversionsincludemanualvalvesfordirectional control
BestPerformancefor Mid-Range Cylinders and Tools
▼SELECTIONCHART For more technical information see next page.
* See the Valve Section in this catalog for technical information on valve types.
7776 www.enerpac.com
PED-1101E
PEM-1201EPEM-1301EPEM-1401E
PER-1301EPER-1401E
PEJ-1201EPEJ-1301EPEJ-1401E
PES-1201EPES-1401E
5,5
5,55,55,5
5,55,5
5,55,55,5
5,55,5
24,9
24,024,024,0
29,529,5
24,924,924,9
28,128,1
245
SubmergedElectricPumps
Model Number230 VAC, 1 ph
Used with Cylinder
Pump Type Valve Type *Valve Function UsableOil
Capacity
(litres)
(kg)
Single-Acting
Single-ActingSingle-ActingDouble-Acting
Single-ActingDouble-Acting
Single-ActingSingle-ActingDouble-Acting
Single-ActingDouble-Acting
Dump
Manual, 3-way, 2-positionManual, 3-way, 3-position Manual, 4-way, 3-position
Solenoid, 3-way, 3-positionSolenoid, 4-way, 3-position
Manual, 3-way, 2-positionManual, 3-way, 3-position Manual, 4-way, 3-position
Manual, 3-way, 2-position Manual, 4-way, 3-position
Advance/Retract
Advance/RetractAdvance/Hold/RetractAdvance/Hold/Retract
Advance/Hold/RetractAdvance/Hold/Retract
Advance/RetractAdvance/Hold/RetractAdvance/Hold/Retract
Advance/RetractAdvance/Hold/Retract
PE Series
Reservoir Capacity:
5,5 litresFlow at Rated Pressure:
0,27l/minMotor Size:
0,37 kW
PE-SeriesSubmergedPumpApplication
The Submerged pump is best suited to power small to
medium size cylinders or hydraulic tools, or whenever quiet, intermittent duty cycle is needed. With its low sound level and the addition of the optional oil cooler, the Submerged pump is suited to light production work as well.
Its lightweight and compact design also make it ideal for applications which require some transport of the pump.
For further application assistance see the ‘Yellow Pages’ or contact your local Enerpac office.
Page:
Maximum Operating Pressure:
700 bar
7978
13 @ 115-1-50/606,75 @ 230-1-50/60700 2,00,37 62-70 70-70070 0,27
255
PE-Series,SubmergedElectricPumps
MotorSize
(kW)
PressureRating(bar)
Motor ElectricalSpecifications *
(Amps @ Volts-Ph-Hz)
Output Flow Rateat 50 Hz(l/min)
Relief ValveAdjustment
Range
(bar)
SoundLevel
(dBA)
* At full load. See ordering matrix footnote for frequency notations.
1st stage 1st stage2nd stage 2nd stage
Speed Chart
To determine how a specific pump will operate your cylinder, see the Pump-Cylinder Speed Chart in the ‘Yellow Pages’.
Page:
SUBMERGED PUMP PERFORMANCE
◀ For full features see previous page.
① Heat Exchanger (optional for all models)② Fill Port③ Pressure Switch (PES-series, optional for other models)④ Oil Level Indicator⑤ Adjustable relief valve
OILFLOWVERSUSPRESSURE
OilFlow(l
/min
) ▶
Pressure(bar) ▶
7978 www.enerpac.com
116
124
P E M - 1 3 01 E
SubmergedElectricPumps
1Product
Type
2Motor Type
3PumpType
4PumpSeries
5ValveType
6Reservoir
Size
7Motor Voltage
1ProductType
P = Pump
2 Motor Type
E = Electric Motor
3PumpType
D = Dump J = Jog M = Manual R = Remote (Solenoid) 1) 2)
S = Pressure Switch
4PumpSeries
1 = 0,37 kW, 700 bar
5ValveType
0 = No valve (PER only) 1 = Dump 2 = 3-way, 2-position, normally open 3 = 3-way, 3-position, tandem center 4 = 4-way, 3-position, tandem center 5 = Modular solenoid valve (PER only)
6 Reservoir Capacity
01 = 5,5 litres
7MotorVoltageandHeatExchanger
B = 115 V, 1 Ph, 50/60 Hz 1)
D = 115 V, 1 Ph, 50/60 Hz 1) with Heat Exchanger E = 230 V, 1 Ph, 50/60 Hz 2)
F = 230 V, 1 Ph, 50/60 Hz 2) with Heat Exchanger I = 230 V, 1 Ph, 60 Hz
1) Solenoid valves operate only at 60 Hz. Can run on 50 Hz with manual valves.2) Solenoid valves operate only at 50 Hz. Can run on 60 Hz with manual valves.
CUSTOMBUILDYOURSUBMERGEDPUMPIf the Submerged Pump that would best fit your application cannot be found in the chart on page 77, here you can easily build your custom submerged pump.
▼ThisishowaSubmergedPumpModelNumberisbuiltup:
ModelNumber:PER-1301E
The PER-1301E is a 0,37 kW, 700 bar, submerged electric pump, with 5,5 litres usable oil capacity, a 3-way, 3-position, remote solenoid valve and a 230 V, 1 Phase, 50/60 Hz motor.
OrderingExample
Hoses
Enerpac offers a complete line of high quality hydraulic hoses. To ensure the integrity of your system, specify only genuine Enerpac hydraulic hoses.
Page:
Gauges
Minimize the risk of over-loading and ensure long, dependable service from your equipment. Refer to the System Components section for a full range of gauges.
Page:
PE Series
Reservoir Capacity:
5,5 litresFlow at Rated Pressure:
0,27l/minMotor Size:
0,37 kWMaximum Operating Pressure:
700 bar
8180
Heavy-duty bearings
Self-priming, high-flow 1st stage pump
Balanced eccentric
Oil bath
Replaceable piston check valves
Motor lip seal
Introducing the Z-Class power pumps from Enerpac – pumps that run cooler, use less electricity and are easy to service.
Enerpac has used the latest metallurgical,
bearing and seal technologies to produce
a pump whose features and benefits
far surpass the electric pumps that are
available today. By reducing the number
of moving parts, improving flow dynamics
and decreasing friction, Z-Class pumps
will stay on the job longer, require
less energy to operate and
when needed, have lower
service costs.
Z-ClassEnerpacPowerPumps
Z-Class power pumps from Enerpac – simply the best pump you will ever use.
Tough.Dependable.Innovative.
8180 www.enerpac.com
0,550,821,001,301,601,642,733,30
ZE3ZE4(T)ZU4(T)ZA4(T)ZG5ZE5(T)ZE6ZG6
0,751,121,25
––
2,245,60
–
–––
2840––––
––––
4,8––
9,7
8888, 20882, 204
102, 212104
88, 20888
106
Z-Classfactoryoptions&accessoriesExtensive list of accessories including heat exchanger, roll cage, skid bar, pressure transducer, return line filter and level and temperature switches, allow complete pump control over a wide range of industrial applications.
Z-ClasspowerpumpsforyourapplicationAvailable in one flow range for universal motor and eight flow ranges for induction motor. Choose from single or two-stage models to provide the optimum cylinder and tool performance for almost any industrial application.
Highlyefficientdesign provides increased flow rates, reduced heat generation and a decrease in power consumption. This means improved tool speed and increased service life – which results in higher productivity and lower operating costs.
Heavy-dutybearings extend pump life by reducing friction, reducing surface-loading and lowering bearing stresses.
Pumpcavityoilbath extends pump life by reducing heat, improving lubrication and reducing wear.
Self-priming, high-flow 1st stage pump increases pump performance by super-charging the 2nd stage piston pump – improving oil flow in both hot and cold weather operation.
Balanced rotating components reduce vibration creating a smoother running pump – reducing wear, friction and sound levels.
Replaceable piston check-valves increase service life of major pump components.
Ergonomic low-voltage pendant features sealed switches and operates at 15 V for improved operator safety.
ZE-SeriesPumpApplications
• Stationary: when pump remains in one location• Inductionmotor: 1 and 3-phase for high cycle usage•Duty-cycle: for heavy-duty, extended cycle application•Cylindersandtools: for medium to large size single and double-acting applications and high speed• Pumpspeed: single or two stage pump unit.
Z-ClassPumpingElement–TheHeartofYourHydraulicSystem
Oil Flow Rate
at 700 bar
(l/min)
Z-Class,AnInnovationinPumpDesign
Back-litLCDonselectZ-Classpumps• pumpusageinformation,hourandcyclecounts• low-voltagewarningandrecording• offersself-testanddiagnosticcapabilities• informationdisplayedin6languages• pressureread-out(whenusedwiththeoptional
pressure transducer)• adjustabletriggerpressuresetting(whenusedwith
the optional pressure transducer).
Z-Class PumpSeries *
Electric MotorPower
(kW)
GasolineEnginePower
(kW)
Page: AirMotor-
Consump-tion
(l/min)
ZU-SeriesPumpApplications
•Mobile: when frequent pump transport is required and/or on remote locations•Universalmotor: 1-phase, runs well under poor voltage supply, using generator power supply or using long extension cord•Duty-cycle: for intermittent applications•Cylinders and tools: for medium to large size single and double-acting applications and high speed•Pumpspeed: two stage pump unit.
* ZA4T, ZU4T, ZE4T and ZE5T-Series are Torque Wrench Pumps.
Back-lit LCD available on ZU and ZE-Series
Electric Pumps. ▶
8382
▼
84
Solenoid Valve *
• Idealforliftingapplicationsandwhereremotecontrol is required .
• WithVE32valve,motoronlyrunsduringtheadvance function, while holding and retracting, the motor is off .
• Motorrunscontinuouslyonpumpswith VE33 and VE43 valves .
BASIC PUMP TYPES
Select the model that suits your application . For special requirements contact your Enerpac office .
Manual Valve with Pendant *
• Forlightproductionandliftingapplications.• Manualvalveforsingle-ordouble-acting
cylinders .• Manualvalvewithpowerseat(VM43LPS),
ideal for post-tensioning applications .
Dump Valve *
• Idealforpunching,crimpingandcutting.• Forusewhenload-holdingisnotrequired.
▼COMMONPUMPMODELS For technical information and other options see next page.
Manual Valve
• Idealchoiceformostapplications.• Manualvalvecontrol,forsingle-actingor
double-acting applications .• Motorcontrolonshroud.
• High-efficiencytwo-speedpumpdesign–higheroilflowand bypass pressure
• Powerful1,25kWuniversalelectricmotorprovideshighpower-to-weight ratio and excellent low-voltage operating characteristics
• High-strength,mouldedcompositeshroudprotectsmotorand electronics, while providing an ergonomic, non-conductive handle for easy transport.
Pro-Series models only* Back-litLCDreadoutprovidespressuredisplayanda
number of diagnostics and readout capabilities never offered on a portable pump before – pump usage information, hour and cycle counts – self-test, diagnostic and read-out capabilities – pressure readout and auto-mode pressure settings.
ZU4-Series,PortableElectricPumpsShown from left to right: ZU4304ME,ZU4420SE-H,ZU4304PE-K
ZU4-SeriesFeatures andOptions
For special requirements see factory installed features and options.
Page:
* Low-voltage control pendant with 3 m. cord controls valve and motor.
Tough.Dependable.Innovative.
8382 www.enerpac.com
® ® ®
VM32VM32VM33VM33VM43VM43VM32VM32VM32VM33VM43VM43VE32DVE32DVE32D
–––
VE32VE32VE33VE43VE43
––––
ZU4204MEZU4208MEZU4308MEZU4320MEZU4408MEZU4420MEZU4204JEZU4208JEZU4220JEZU4308JEZU4408JEZU4420JEN/AN/AN/A–––N/AN/AN/AN/AN/A––––
ZU4204LEZU4208LEZU4308LEZU4320LEZU4408LEZU4420LEZU4204KEZU4208KEZU4220KEZU4308KEZU4408KEZU4420KEZU4104DEZU4108DEZU4120DE–––ZU4204SEZU4208SEZU4308SEZU4408SEZU4420SE––––
••••
••••
•••
•••
••
••
••
•••••••••••••••
•••••
••••
•••
•••
•••••••••••••••
•••••
ZU4204REZU4208REZU4308REZU4320REZU4408REZU4420REZU4204PEZU4208PEZU4220PEZU4308PEZU4408PEZU4420PEN/AN/AN/A–––N/AN/AN/AN/AN/A––––
4,08,08,0
20,08,0
20,04,08,0
20,08,08,0
20,04,08,0
20,0–––
4,08,08,08,0
20,0––––
273232503250273250323250293351–––
2933393956––––
ZU4-Series,ElectricPumps
ZU4 Series
Reservoir Capacity:
4 - 40 litresFlow at Rated Pressure:
1,0l/minMotor Size:
1,25 kW
Z-Class–APump For Every Application
Patented Z-Class pump technology provides high
by-pass pressures for increased productivity – important in applications using long hose runs and high pressure-drop circuits, like heavy lifting or certain double-acting tools.
Enerpac ZU4-Series Pumps are built to power small to large-sized cylinders or hydraulic tools, or wherever high-speed, intermittent duty, remote hydraulic power is needed.
ClassicElectricPump
• TheClassichastraditionalelectro-mechanical components (transformers, relays and switches) in place of solid-state electronics.
The Classic delivers durable, safe and efficient hydraulic power for demanding markets like construction, post-tensioning and foundation repair.
StandardElectricPump
• Forapplicationsthatdonotrequire digital display features of the Premium Pump. Available in all manual or jog versions.
ProElectricPump
• Digital(LCD)displayfeaturesabuilt-in hour meter and shows self-diagnostic, cycle-count and low voltage warning information.
Pressure can also be displayed when the pump is equipped with an optional pressure transducer.
Maximum Operating Pressure:
700 bar
1) See valves section for technical information on valve types. 2) See custom order matrix on page 87 for other voltage options.3) Subtract 1,4 kg for Standard (STD) Electric models.
ManualManualManualManualManualManual
Remote (Man .)Remote (Man .)Remote (Man .)Remote (Man .)Remote (Man .)Remote (Man .)
RemoteRemoteRemote
–––
Remote Remote Remote RemoteRemote
––––
ClassicElectric
Standard(STD) Electric
Pro Electric(incl. LCD)
Pump type Pump Control
Useable Oil
Capacity
(litres)
Model Number230 V - 1 phase - 50 Hz 2)
ProElectric Weight 3)
(kg)
Valve FunktionUsed with Cylinder
Valve Type 1)
8584
116
124
ZCF-2*
ZRC-04*ZRC-04H*ZRB-10*ZRB-20*ZRB-40*
SBZ-4*SBZ-4L*
2,23,2
ZPT-U4* ZLS-U4*± 0,5%3,5 - 700 3,5 5-110 0,110
Foot Switch•Hands-freeremotecontrol
on solenoid dump and 3-position valves
•With3metrescord.
Level/TemperatureSwitch• Ensuresfeedbackonpumpoil
level and temperature• Drop-indesignallowsforeasy
installation to pump reservoir• Plugsdirectlyintopump
electrical enclosure• Built-inthermalsensingshuts
off pump when unsafe operating temperature is reached
•Oillevelswitchshutsdownpumpbefore oil reaches an unsafe operating level.
ZU4-Series,Options&Accessories
PressureTransducer*•Moredurablethananaloggauges
(against mechanical and hydraulic shock)
•Moreaccuratethananaloggauges(0,5%fullscaleofpump)
•Calibrationcanbefinetunedforcertification
• “Setpressure”featureturnsoffmotor at user defined pressure (or shifts valve to neutral on models withVE33/VE43valves)
•Displaypressureinbar,psiorMPa. * Requires LCD Electric
Roll Cage • Protectspump• Providesgreaterpumpstability.
ModelNumber
OperatingTemperature
(°C) (kg)
MaximumPressure
(bar)
* Add suffix L for factory installation.* Add suffix T for factory installation.
Accessory Kit Model Number
AdjustablePressure
Range(bar)
Switch-point
repeatability
Dead-band
(bar)
Hoses
Enerpac offers a complete line of high-quality hydraulic hoses. To ensure the integrity of your system, specify only Enerpac hydraulic hoses.
Gauges
Minimize the risk of over-loading and ensure long, dependable service from your equipment. Refer to the System Components section for a full range of gauges.
Page:
Page:
Accessory Kit Modelnr.
Can be used on ZU4-SeriesPumps with
* Add suffix U for factory installation.
Solenoid VE-Series valves
Accessory Kit Modelnr.
Fits on reservoir
* Add suffix R for factory installation. 1) Without heat exchanger 2) With heat exchanger.
4 and 8 litres 1)
4 and 8 litres 2)
10 litres
20 litres
40 litres
Skid Bar • Provideseasytwo-handlift• Providesgreaterpumpstabilityonsoft
or uneven surfaces.
Acces-sory Kit Modelnr.
Fits on reservoir
(kg)
* Add suffix K for factory installation.
4 and 8 l without heat exchanger
4 and 8 l with heat exchanger
8584 www.enerpac.com
900 950 20,7 26,5 12
13,8ZPF* 45,4 1,7ZHE-U115*ZHE-U230*
4,14,1
F
K
R
H
G
–
–
–
F
K
R
H
G
–
–
–
ZPF
SBZ
ZRC
ZHE
G
–
–
–
ZPF
SBZ
ZRC
ZHE
G
–
–
–
F
K
R
H
G
T
L
U
ZPF
SBZ
ZRC
ZHE
G
ZPT-U4
ZLS-U4
ZCF-2
ZU4-Series,Options&Accessories
ZU4 Series
Reservoir Capacity:
4 - 40 litresFlow at Rated Pressure:
1,0l/minMotor Size:
1,25 kWMaximum Operating Pressure:
700 bar
HeatExchanger
Can be factory installed on ZU4-Series Classic, Standard Electric and Pro Electric models.
• Extendssystemlife.• Stabilizesoiltemperatureata
maximum of 54 °C at 21 °C ambient temperature.
Do not exceed maximum oil flow and pressure ratings. Heat exchanger is not suitable for water-glycol or high water based fluids.
ThermalTransfer *
Btu/h kJoule
MaximumPressure
(bar)
MaximumOil Flow
(l/min)
Voltage
(VDC)
* At 1,9 l/min at 21 °C ambient temperature.
Acces-sory Kit Modelnr.
MaximumPressure
(bar)
MaximumOil Flow
(l/min)
By-passSetting
(bar)
* Add suffix F for factory installation.
HeatExchanger•Removesheatfromby-passoilto
provide cooler operation• Stabilizesoilviscosity,increasing
oil life and reduces wear of pump and other hydraulic components.
Accessory Kit Nr.
Can be used on
* Add suffix H for factory installation.
115 V pumps230 V pumps
(kg)
25 Micron Return Line Filter •Removescontaminantsfrom
return oil flow• By-passvalvepreventsdamage
if filter is dirty•Withmaintenanceindicator.
ZU4-SeriesOptions
AccessoryKits can be installed by the customer.
See chart below for all possible options on ZU4-Series pumps:
•ClassicElectric, •Standard(STD)Electric(noLCD)•ProElectric(withLCD). Refer to page 87 for ordering matrix.
ZU4-Series Options Factory Installed
ClassicElectric
StandardElectric
Accessory Kits
ClassicElectric
StandardElectric
Return Line Filter
Skid Bar 1)
Roll Cage
Heat Exchanger
1000 bar Pressure Gauge
Pressure Transducer
Level/Temperature Switch
Foot Switch
ProElectric
ProElectric
1) Skid Bar not in combination with Roll Cage.
8786
A B C D E F
4,0
8,0
10,0
20,0
40,0
115-1-50/60230-1-50/608,8 1,21,25 85-90 140-70011,5 1,0
424
424
439
465
551
142
142
157
180
269
279
279
413
413
399
152
206
305
422
503
-
-
384
500
576
-
-
279
396
480
ZU4,SpecificationsandDimensions
Pump Dimensions (mm)
⅜"-18 NPTF Advance and Retract Ports① User adjustable relief valve② Oil fill port SAE #10 ⅞"-14 UNF-2B③ Oil level sight gauge④ Oil drain ½" NPTF⑤ M8, 6 mm deep⑥ Handles on all 10, 20 and
40 litres reservoirs.
Options (see chart on page 85):⑦ Back-lit LCD Electric⑧ Pressure transducer⑨ Heat Exchanger⑩ Skid Bar Fits 4 and 8 litres reservoirs⑪ Handle guard installed on all 10, 20 and
40 litres reservoirs⑫ Reservoir handles (not shown) included
on all 10, 20 and 40 litres reservoirs.
ZU4-Serieswith10,20and40litresreservoirs (left view shown without side handle)
ZU4-Serieswith4and8litresreservoirs
UsableReservoirCapacity
(litres)
MotorSize
(kW)
Motor ElectricalSpecifications
(Volts-Ph-Hz)
Output Flow Rateat 50 Hz(l/min)
Relief ValveAdjustment
Range
(bar)
SoundLevel
(dBA)7 bar 350 bar50 bar 700 bar
ZU4-SERIES PERFORMANCE CHART
OILFLOWVERSUSPRESSURE
Oilflo
w (l
/min
) ▶
Pressure (bar) ▶
8786 www.enerpac.com
Z 4 1 04 D E - H K TU
255
200
1Product
Type
2Motor Type
3Flow
Group
4ValveType
5Reser-
voir Size
6Valve
Operation
7Voltage
▼ThisishowaZU4-Seriespumpmodelnumberisbuiltup:
1 ProductType Z = Pump Series
2 Motor Type U = Universal electric motor
3 Flow Group 4 = 1,0 l/min @ 700 bar
4 ValveType (see page 110-111 for more details) 1 = Dump (VE32D) 2 = 3 way/2 position manual or electric (VM32 or VE32) 3 = 3 way/3 position manual or electric (VM33 or VE33) 4 = 4 way/3 position manual or electric (VM43 or VE43) 6 = 3 way/3 position locking manual w/po check (VM33L) 7 = 3 way/2 position manual (VM22) 8 = 4 way/3 position locking manual w/po check (VM43L) 9 = 4 way/3 position manual w/power seating (VM43-LPS)
5 Reservoir Size (useable capacity) 04 = 4 litres 08 = 8 litres 10 = 10 litres 1)
20 = 20 litres 1)
40 = 40 litres 1)
1) reservoir includes side handles.
6 ValveOperation D = Dump (solenoid valve w/pendant and LCD Electric) J = Jog (manual valve w/pendant and Standard Electric (i.e. w/o LCD) K = Jog (manual valve w/pendant and LCD Electric) L = Manual valve w/LCD Electric (w/o pendant) P = Manual valve w/pendant and classic electric (i.e.w/o LCD) R = Manual valve w/Classic electric (i.e. w/o LCD) [w/o pendant] M = Manual valve w/Standard Electric (i.e. w/o LCD) [w/o pendant] S = Solenoid valve w/pendant and LCD Electric
7 Voltage B = 115V, 1 ph, 50/60Hz E = 208-240V, 1 ph, 50/60 Hz (w/European plug and CE EMC compliant) I = 208-240V, 1 ph, 50/60 Hz (w/NEMA 6-15 plug)
8OptionsandAccessories (see page 85 for possibilities) F = Filter G = 0-1000 pressure gauge (ø 63,5 mm) 1)
H = Heat exchanger K = Skid Bar (4 and 8 litres reservoirs only) L = Level/temperature switch 2) 3)
N = No reservoir handles (includes lifting eyes) R = Roll Cage T = Pressure transducer 2)
U = Foot switch
8OptionsandAccesories
ZU4-Series,PumpOrderingMatrix
ZU4 Series
Reservoir Capacity:
4 - 40 litresFlow at Rated Pressure:
1,0l/minMotor Size:
1,25 kWMaximum Operating Pressure:
700 bar
CUSTOMBUILDYOURZU4-SERIESPUMPIf the ZU4-Series pump that would best fit your application cannot be found in the chart on page 83, you can easily build your custom ZU4-Series pump here.
Speed Chart
To determine how a specific pump will operate your cylinder,
see the Pump-Cylinder Speed Chart in the ‘Yellow Pages’.
Page:
OrderingExample
ModelNumber: ZU4408DE-HKT
ZU4408DE-HKT is a Pro Electric model pump with LCD, 1,0 l/min oil flow at 700 bar, pump with a dump valve, an 8 liter reservoir, operates on 230V, heat exchanger, pressure transducer and skid bar.
TorqueWrenchPumps andHoses
Enerpac system matched air and electric torque wrench pumps provide control to
operate hydraulic torque wrenches.
Page:1) Pressure gauge not available on pump models with pressure transducer
2) These options require Pro Electric
3) Not available on 4 and 8 litres reservoirs
8988
▼
®
®
®
––––
4,010,020,040,0
93
•••––
VM32VM33VM33LVM43VM43L
–––
••
•••••
–
••••
•••••
4,08,0
10,020,040,0
••••––
VM32VM32VM33VM33LVM43VM43L
––––
••
••••••
––
••••
••••••
4,08,0
10,010,020,040,0
•••••
VE32DVE32DVE32DVE32DVE32D
–––––
•••••
–––––
•••••
4,08,0
10,020,040,0
•••–––
VE33VE33VE33VE43VE43VE43
–––
•••
••••••
••••••
••••••
4,08,0
10,010,020,040,0
PUMP CONFIGURATIONS
For options and other model numbers see ordering matrix or contact your Enerpac office . (For Z-Class pumps with air motor see ZA-series pumps on page 102) .
With manual valve, without electric box or LCD
• Idealchoiceformostapplication• Manualvalvecontrol,forsingleanddouble-actingapplications• Manualmotorcontrol• On/Offswitchon1-phaseelectricmotor.
ZE-Series,ElectricPumps
The New Standard for Industrial Applications
Shown from left to right: ZE3304ME-K,ZE4110DE-FHR
No valve, without electric box 2) or LCD
• ForremotevalvesorpumpmountingEnerpacVM-seriesvalves• For remote valve mounting order BSS1090 high pressure connecting plate .
Pump Type
Used with Tool or
Cylinder
Valve Function 1)
Valve 1)
ModelNumber
UseableOil
Capacity
(litres) Page:
With manual valve, with electric box and LCD
• Forsingle-actingordouble-actingapplications• On/offswitchon1-phaseelectricmotor• Alloptionsavailable.
With solenoid dump valve, with electric box and LCD
• Idealforpunching,crimpingandcutting• Forusewhenloadholdingisnotrequired• Push-buttonpendant3) controls valve and motor• Alloptionsavailable.
With solenoid 3-position valve, with electric box and LCD
• Idealforproductionandliftingapplications• 3-positionvalves(advance/hold/retract)• Push-buttonpendant3) controls valve and motor• Alloptionsavailable.
MAN
UAL
VALV
E CO
NTRO
LRE
MOT
E VA
LVE
CONT
ROL
1) See Valve Section (page 111) for hydraulic symbols and details.2) For No Valve, with Electric Box, see ordering matrix on page 93.3) Pendant includes 3 meters cord.
OilLevelGlass
All ZE-Series pumps have an oil sight glass and steel reservoirs. Full sight oil level glass on 10, 20 and 40 litres reservoirs, oil level indicators on 4 and 8 litres reservoirs.
Tough.Dependable.Innovative.
8988 www.enerpac.com
ZE3004NWZE3010NWZE3020NWZE3040NW
36455780
ZE4004NWZE4010NWZE4020NWZE4040NW
40496184
–ZE5010NWZE5020NWZE5040NW
–546689
–ZE6010NWZE6020NWZE6040NW
–7284
107ZE3204MWZE3308MWZE3610MWZE3420MWZE3840MW
3944506085
ZE4204MWZE4308MWZE4610MWZE4420MWZE4840MW
4348546489
––ZE5610MWZE5420MWZE5840MW
––
596994
––ZE6610MWZE6420MWZE6840MW
––
7787
112ZE3204LWZE3208LWZE3310LWZE3610LWZE3420LWZE3840LW
424751536388
ZE4204LWZE4208LWZE4310LWZE4610LWZE4420LWZE4840LW
465155576792
––ZE5310LWZE5610LWZE5420LWZE5840LW
––ZE6310LWZE6610LWZE6420LWZE6840LW
––
788090
115ZE3104DWZE3108DWZE3110DWZE3120DWZE3140DW
4449536588
ZE4104DWZE4108DWZE4110DWZE4120DWZE4140DW
4853576992
––ZE5110DWZE5120DWZE5140DW
––ZE6110DWZE6120DWZE6140DW
––
7992
115ZE3304SWZE3308SWZE3310SWZE3410SWZE3420SWZE3440SW
495458587093
ZE4304SWZE4308SWZE4310SWZE4410SWZE4420SWZE4440SW
535862627497
––ZE5310SWZE5410SWZE5420SWZE5440SW
––ZE6310SWZE6410SWZE6420SWZE6440SW
––
858597
120
––
60627297––
627497––
676779
102
93
• High-efficiencypumpdesign–higheroilflowand by-pass pressure
• High-strength,mouldedelectricalboxprotectselectronics,powersuppliesandLCDreadoutandstands up to harsh industrial environments
• IP54protectionandisolationclass• Back-litLCDprovidesselftest,diagnosticandread-out
capabilities never before offered on an industrial pump (included on pump with electric valves, optional on othermodels)
• Totallyenclosed,fan-cooledindustrialelectricmotorsfor extended life
• Useradjustablereliefvalvebuilt-inonmanualandsolenoidvalves.Oilportsonvalvesare3/8"NPTF
• Steelfanguardonallelectricmotors• Fullsightoillevelglass• 40micronfilterbreatherwithsplashguard• Durablesteelreservoirs.
4) See custom ordering matrix on page 93 for other voltages.
ZE-Series,ElectricPumps
ZE Series
Reservoir Capacity:
4 - 40 litresFlow at Rated Pressure:
0,55-2,73l/minMotor Size:
0,75 - 5,60 kWMaximum Operating Pressure:
700 bar
ZE3-Series
0,55 l/min at 700 barTwo-stage pump
Model Nr. 4)
400V / 3 phase
ZE4-Series
0,82 l/min at 700 bar Two-stage pump
Model Nr. 4)
400V / 3 phase
ZE5-Series
1,64 l/min at 700 bar Two-stage pump
Model Nr. 4)
400V / 3 phase
ZE6-Series
2,73 l/min at 700 bar Two-stage pump
Model Nr. 4)
400V / 3 phase(kg) (kg) (kg) (kg)
Single or Two-Stage
Choose single-stage pumps for applications that require
constant flow regardless of pressure such as testing or clamping.
Two-stage pumps have an increased output flow at low pressure to allow fast movement towards the load, for reduced cycle times and increased productivity.
LockingValves
For applications requiring positive load holding, VM-Series valves (except VM32) are available with
a pilot- operated check valve. This provides hydraulic locking of the load until the valve is shifted into the retract position. To order this feature on your ZE-series pump see the valve type in the order matrix.
AdjustableReliefValve
All VM and VE-Series have a user adjustable relief valve to allow the operator to easily set the optimum working pressure.
Page:
9190
SBZ-4*SBZ-4L*
2,23,2
13,8ZPF* 45,4 1,780ZLS-U4* 5 - 110 10
ZCF-2*
ZRC-04*ZRC-04H*ZRB-10*ZRB-20*ZRB-40*
5,56,56,06,06,0
Electric Box 1)
• Back-litLCD• Pumpusageinformation,hourand
cycle counts• Low-voltagewarningandrecording• Self-testanddiagnosticcapabilities• Pressureread-out2)
• Auto-modepressuresetting2)
• Informationcanbedisplayedinsixlanguages 3)
1) Included on pumps with solenoid valves. Can be factory installed on pumps with manual valve.
2) When used with optional pressure transducer.
3) English, French, German, Italian, Spanish and Portuguese.
ZE-Series,Options&Accessories
Skid Bar• Provideseasytwo-handlift• Providesgreaterpumpstabilityon
soft or uneven surfaces.
Roll Cage• Foreasyportabilityandhoisting• Protectspumpandelectricbox• Availableforallreservoirsizes.
Return Line Filter • 25micronnominalfilterremoves
contaminants from return oil flow before allowing it back into tank
• Internalby-passvalvepreventsdamage if filter is dirty
•Withmaintenanceindicator• ReplaceablefilterelementPF25.
Level/TemperatureSwitch4)
• Shutsdownpumpbeforeoillevelreaches an unsafe level, avoiding damage due to cavitation
• Shutsdownpumpwhenunsafeoiltemperature is reached
• Idealifpumpisusedinremoteareawithout visual access to oil level.
4) 24 V, requires Electric Box. Available for 10, 20 and 40 litres reservoirs.
Foot Switch 5)
• Hands-freeremotecontrolonsolenoid dump and 3-position valves
•With3meterscord.5) 15 V, requires Electric Box.
Accessory Kit Nr.
Fits on reservoir size:
(kg)
* Add suffix K for factory installation.
Acces-sory Kit Modelnr.
MaximumPressure
(bar)
MaximumOil Flow
(l/min)
By-passSetting
(bar)
* Add suffix F for factory installation.
Acces-sory Kit Modelnr.
Fixed Temperature
Signal(°C)
Operating Tempe-rature
(°C)
Max.Pressure
(bar)
* Add suffix L for factory installation.
Accessory Kit Nr.
Can be used on ZE-Seriespumps with
* Add suffix U for factory installation.Solenoid VE-Series valves
4 and 8 litres 5)
4 and 8 litres 6)
Accessory Kit Nr.
Fits on reservoir size:
(kg)
* Add suffix R for factory installation.5) For pump without heat exchanger6) For pump with heat exchanger.
4 and 8 litres 5)
4 and 8 litres 6)
10 litres20 litres40 litres
9190 www.enerpac.com
F
K
R
S
–
G
–
–
–
–
F
K
R
S
H
G
P
T
L
U
ZPF
SBZ
ZRB
–
–
–
–
–
–
–
ZPF
SBZ
ZRB
–
ZHE
–
ZPS-E3
ZPT-U4
ZLS-U4
ZCF-2
3,5 - 700ZPT-U4* ± 0,5% 3,5
ZHE-E04*ZHE-E10*
± 2%ZPS-E3* 8 - 38 3/8”
4,14,1
ZCP-1ZCP-3
VE32DVE32, VE33, VE43
ZE-Series,Options&Accessories
HeatExchanger5)
• Removesheatfromby-passoiltoprovide cooler operation
• Stabilizesoilviscosity,increasingoil life and reduces wear of pump and other hydraulic components.
PressureTransducer1)
• DisplayspressureonLCDinbar,MPaorpsi
•Moreaccuratethananaloggauge•Calibrationcanbefine-tunedfor
certification• Easy-viewingvariableratedisplay• “Setpressure”featureturnsoff
motor at user defined pressure 2).1) 24 V, requires Electric Box.2) Or shifts valve to neutral position on pump
models with VE33 and VE43 solenoid valves.
ZPT-U4PressureTransducer
More durable against mechanical and hydraulic shock than analog gauges.
• Digitalpressureread-outprovidesaccuracy of 0,5% of full scale.
• Easy-viewingvariableratedisplayautomatically varies increments between 3, 14, 35 and 145 bar as rate of pressure change increases.
• “Setpressure”featureturnsoffmotoratuser defined pressure (or shifts valve to neutral on VE33 and VE43 valves).
PressureSwitch3)
• Controlspump,monitorssystem•Adjustablepressure35-700bar• Includesglycerinefilled1000bar
pressure gauge G2536L• Accuracy±1,5%offullscale.3) 24 V, requires Electric Box. Not available in
combination with pressure transducer.
Pendants4)
• Forpumptypeswithvalveoperation“W”(NoValve,withElectricBox,withoutpendant).
4) When ordering Enerpac VE-Series solenoid valve the pendant must be ordered separately. Pendant connection to be plugged into electric box.
Options
AccessoryKits can be installed by customer. See chart below for options on Standard Electric
(without electric box) or LCDElectric (with electric box). Refer to page 93 for ordering matrix.
ZE-Series Options FactoryInstalled
Return Line Filter
Skid Bar 1)
Roll Cage
Single-stage
Heat Exchanger
Pressure Gauge 2)
Pressure Switch 3)
Pressure Transducer 4)
Level/Temp Switch 5)
Foot Switch 6)
Std.Electr.
LCDElectr.
AccessoryKits
Std.Electr.
LCDElectr.
1) Available for 4 and 8 litres reservoirs.2) Not available on pumps with pressure transducer.3) Includes 1000 bar gauge. Only available on manual
valves without locking feature.4) Electric box can accept either pressure switch or
pressure transducer, but not both.5) Available for 10, 20 and 40 litres reservoirs.6) For control of solenoid dump and 3-position valves.
Acces-sory Kit Modelnr.
AdjustablePressure
Range(bar)
Switch-point
repea-tability
Dead-band
(bar)
* Add suffix T for factory installation.
Accessory Kit Nr.
Fits on reservoir size:
5) 24 VDC, requires electric box.* Add suffix H for factory installation.
ZHE-SeriesHeatExchangers
Heat exchanger stabilizes oil temperature at 54 °C at 21 °C ambient temperature. Thermal
transfer at 1,9 l/min and 21 °C ambient temperature: 900 Btu/hour [950 kJ].
Do not exceed max. oil flow of 26,5 l/min and max. pressure of 20,7 bar. Not suitable for water-glycol or high water based fluids.
Acces-sory Kit Modelnr.
Switch-point
repea-tability
Deadband
(bar)
OilPorts
(NPTF)
* Add suffix P for factory installation.
4 and 8 litres10, 20 and 40 litres
(kg)
PendantModel Nr.
To be used with solenoid valve:
9392
4,08,0
10,020,040,0
457457533558648
A143143158180270
B279279419419399
C152206305422505
D––
384501576
E––
371488572
E1513513600625715
H
75
75
75
80
70-700
70-700
70-700
70-700
0,596,150,878,881,7511,613,0012,29
0,595,260,878,201,7211,272,9412,15
0,570,570,840,841,681,682,862,86
0,550,550,820,821,641,642,732,73
0,75
1,12
2,24
5,60
4-8-10-20-40
4-8-10-20-40
10-20-40
10-20-40
ZE-Series,Specifications&Dimensions
ZE-SeriesPumpswith4-8litresreservoir
① User adjustable relief valve on all manual and solenoid valves. 3/8" NPTF on A and B ports; 1/4" NPTF on auxiliary ports.
② Electric Box
③ Heat Exchanger
④ Roll Cage
⑤ Return Line Filter
⑥ Skid Bar
⑦ Magnetic Oil Drain
⑧ Oil Drain / Oil Level/Temperature Switch
ZE-SeriesPumpswith10-20-40litresreservoir
Reservoir Size
(useable oil in litres)
ZE-Series Pump Dimensions (mm)
Pump Series
Relief Valve
Adjustment Range
(bar)
Output Flow Rate at 50 Hz *(l/min)
▼ ZE-SERIESPERFORMANCECHART
SoundLevel
(dBA)at
7 barat
50 barat
350 barat
700 bar
Pump Unit
Single-stageTwo-stageSingle-stageTwo-stageSingle-stageTwo-stageSingle-stageTwo-stage
ZE3
ZE4
ZE5
ZE6
low pressure high pressure
MotorSize
(kW)
Pressure(bar) ▶
OilFlow(l
/min
) ▶
OilFlow(l
/min
) ▶
OilFlow(l
/min
) ▶
OilFlow(l
/min
) ▶
Pressure(bar) ▶ Pressure(bar) ▶ Pressure(bar) ▶
Two-stage Single-stage
Available Reservoir Sizes
(useable oil)
(litres)
Single or Two-Stage
Choose single-stage pumps for
applications that require constant flow regardless of pressure such as testing or clamping. Two-stage pumps have an increased output flow at low pressure to allow fast movement towards the load, for reduced cycle times and increased productivity.
* Oil flow will be approximately 6/5 of these values at 60 Hz.
9392 www.enerpac.com
Z 4 1 10 D W - F H TE L
91
ZE-Series,PumpOrderingMatrix
1Product
Type
2Motor Type
3Flow
Group
4Valve Type
5Reser-
voir Size
6Valve
Operation
7Motor
Voltage
▼ThisishowZE-Seriespumpmodelnumbersarebuiltup:
8Options and Accessories
1 ProductType
Z = Pump Class
2 PrimeMover
E = Induction electric motor
3 Flow Group
3 = 0,55 l/min @ 700 bar (0,75 kW) 4 = 0,82 l/min @ 700 bar (1,12 kW) 51) = 1,64 l/min @ 700 bar (2,24 kW) 61) = 2,73 l/min @ 700 bar (5,60 kW)
4 ValveType
0 = No valve, with cover plate 1 = 3/2 Dump valve VE32D 2 = 3/2 manual VM32 3 = 3/3 manual VM33 or
electric VE33 4 = 4/3 manual VM43 or
electric VE43 6 = 3/3 manual locking valve VM33L
with pilot operated check. 8 = 4/3 manual locking valve VM43L
with pilot operated check.
5 Reservoir Size, useable oil
042) = 4 litres 082) = 8 litres
10 = 10 litres 20 = 20 litres
40 = 40 litres
1) ZE5 and ZE6-Series only available with 3-phase electric motors.2) 4 and 8 litres only available on ZE3 and ZE4-Series.3) 1-phase motors only available on ZE3 and ZE4-Series4) 208-240V, 1 ph with European plug EMC directive compliant.5) Models with 3-ph motors without Electric Box shipped without cord, motor starter
or overload protection.6) Not available on pumps with pressure transducer (T).7) Requires Electric Box.8) Not available on 4 and 8 litres reservoir.9) Provides digital pressure read-out on LCD-display of electric box. 10) When using solenoid valve on valve
type “W” order optional pendant.
ZE Series
Reservoir Capacity:
4 - 40 litresFlow at Rated Pressure:
0,55-2,73l/minMotor Size:
0,75 - 5,60 kWMaximum Operating Pressure:
700 bar
6 ValveOperation
D = Dump valve (solenoid), with pendant and Electric Box (LCD) L = Manual valve, without pendant, with Electric Box M = Manual valve, without pendant, without Electric Box N = No valve, without Electric Box S = Solenoid valve, with pendant and Electric Box (LCD) W = No valve, with Electric Box (LCD), without pendant 10)
7 MotorVoltage
Single phase motor 3)
B3) = 115V, 1 ph, 50-60Hz E3) = 208-240V, 1 ph, 50-60 Hz 4)
I = 208-240V, 1 ph, 50-60 Hz USA plug
Three phase motor 5)
M5) = 190-200V, 3 ph, 50-60Hz G5) = 208-240V, 3 ph, 50-60 Hz W5) = 380-415V, 3 ph, 50-60 Hz K5) = 440V, 3 ph, 50-60 Hz J5) = 460-480V, 3 ph, 50-60 Hz R5) = 575V, 3 ph, 60 Hz
All Z-Class electric pumps comply with TÜV and CE requirements.
HowtoOrder Single-StagePumps
To specify a single-stage pump, place the letter “S” at the end of
the model number. For example:
ZE4210ME-SZE4-Series pump, oil flow 0,82 l/min at 700 bar, VM32 manual valve, 10 litres reservoir, without electrical box, without pendant, 240 Volt 1-phase electric motor and single-stage pump unit.
ZE3120DW-SZE3-Series pump, oil flow 0,55 l/min at 700 bar, VE32D solenoid dump valve, 20 litres reservoir, with electrical box (LCD), without pendant, 400 Volt 3-phase electric motor and single-stage pump unit.
Pendants
When ordering Enerpac VE-Series solenoid valve for use on “W” type valve operation (No Valve, with
Electric Box (LCD), without pendant) the pendant must be ordered separately. Pendant connection to be plugged into electric box.
8 OptionsandAccessories
F = Return Line Filter G6) = 1000 bar gauge H7) = Heat exchanger K = Skid Bar (only on 4 and 8 litres) L7) = Oil Level/Temperature Switch 8) N = No reservoir handles (includes lifting eyes)
P7) = Pressure Switch (only available on manual valves without locking feature) R = Roll Cage S = Single-stage pump unit T7) = Pressure transducer 9)
U7) = Foot Switch
Page:
9594
▼
SFP-Series, 700 bar Split Flow PumpsSFP 421SW and SFP 404SW
• 2,4or6split-flowoutlets• Individualorsimultaneouslyoperationofvalves,
with advance/hold/retract function• Joystick(manual)controlledorpendant(solenoid)controlledvalves• Flowperoutletrangingfrom0,45to4,2l/minat700bar• Fordouble-andsingle-actingcylinders• Adjustablepressurereliefvalvepercircuit• Reservoir:40or150litres.
Multiple Outlets with Equal Oil Flow
▼ Step-by-step stage lifting an old windmill using double-acting RR-506 cylinders powered by a split-flow pump.
Typical Split Flow Pump Applications
For lifting applications on multiple points Split-Flow Pumps are a far better alternative than using separate operated pumps . Where synchronization of maximum 4% is acceptable and load is even distributed over the lifting points, split flow pumps are a safe and economical solution . The SFP-Series pumps feature both single and synchronized multiple outlet control either through joystick or pendant operation .
Application examples:• Bridgedeckliftingforbearingmaintenance• Stageliftinginconstructionandshipbuilding• Skiddingtomovestructuresandbuildings• Levellingofconstructionslikewindturbines.
Gauges and Adaptors
Always use gauges to visualise pressure or load in your hydraulic system to work safer .
Hoses and Couplers
Enerpac offers a complete line of high quality hydraulic hoses . To ensure the integrity of your system, specify only genuine
Enerpac System Components .
Remote Control Pendant
Split Flow pumps with solenoid valves include a remote pendant with selector switches for each individual outlet, allowing single
or multiple cylinder operation .
9594 www.enerpac.com
STOP
1
2
3
4
P
MA
P
MA
P
MA
P
MA
605 1130
12501322
84590
0
660 900
A
B B B B
MP
A
MP
A
MP
A
MP
SFP 213MW–SFP 228MW–SFP 242MW–SFP 404MW–SFP 409MW–SFP 414MW–SFP 421MW–SFP 604MW–
2
40 1,30 5,5240240488488526526240240475475488488526526240240
7,5
11
5,5
7,5
11
5,5
2,80
4,20
0,45
0,90
1,40
2,10
0,45
150
40
150
40
4
6
–SFP 213SW–SFP 228SW–SFP 242SW–SFP 404SW–SFP 409SW–SFP 414SW–SFP 421SW–SFP 604SW
5
234
700 bar Split Flow Hydraulic Pumps
SFPSeries
▼ Split flow pump used to operate double-acting cylinders to lift steel bridge segments.
Reservoir Capacity:
40 - 150 litresSplit Flow Outlets:
2, 4 and 6 outletsFlow at Rated Pressure:
0,45 - 4,20 l/minMaximum Operating Pressure:
700 bar
Lifting Cylinders
For a complete line of Enerpac cylinders, see the Cylinder and Lifting Products in our catalogue .
Lifting an unbalanced load?
See the Enerpac EVO-Series modular PLC-controlled synchronous lifting systems to control 4, 8 or 12 lifting points .
ReservoirSize
(litres)
Number ofSplit Flow
Outlets
SFP-Series with 150 litres reservoir (shown with 4 split flow outlets)
SFP-Series with 40 litres reservoir (shown with 4 split flow outlets)
Oil Flow per Outlet@ 700 bar
(l/min)
Motor Size400 V - 3ph
50 Hz
(kW) (kg)
Pump Model Number4/3 Valve Operation
Advance/Hold/RetractManual
(Joystick)24 V Solenoid
(Pendant)
① Manifold with split flow outlets and CR-400 couplers② Adjustable pressure relief valve per circuit③ Manual 4/3 control valves with joysticks④ Solenoid 4/3 control valves (24 VDC)⑤ 3+N+PE 400V 16A plug⑥ Oil sight gauge(s)⑦ Remote control pendant with 10 meter cable .
Page:
Page:
9796
▼
XSC 1
XLK1
XPG1
Shown: XA 11G
XA-Series,AirDrivenHydraulicFootPumps
Productivity &Ergonomics
• Ergonomicdesignforlessoperatorfatigue
• Variableoilflow&finemeteringforprecisecontrol
• Higheroilflowforincreasedproductivity
• Closedhydraulicsystempreventscontaminationandallows pump usage in any position
• Pedallockfunctionforretractposition
• Externaladjustablepressuresettingvalve
• GroundscrewforimprovedATEXexplosionsafety.
2 Litres Reservoir
Double oil capacity for powering larger hydraulic cylinders and tools.
4/3ControlValve
For powering double-acting hydraulic cylinders and tools.
OptionalPressureGauge
Integrated gauge with calibrated scale reading in bar, psi and MPa for actual pressure reading.
PedalSafetyGuard
Customer installed frame protects both pedals against accidental activation.
“Joy-stick”LeverKit
Customer installed set of handles for manual operation of both pedals.
Swivel Connector
Customer installed swivel connector for optimal orientation of the hydraulic hose. See page 121 for details.
1) Accessories must be ordered separately.
Model Number 1)
Model Number 1)
Model Number 1)
9796 www.enerpac.com
0
0,5
1,0
1,5
2,0
0 100 200 300 400 500 600 700
XA1
H1 H2 L
1,0 XA 112) – • – 152 – – 8,6
2,0 XA 122) – • – – 170 – 10,2
1,0 XA 11G • • – 152 – – 8,8
2,0 XA 12G • • – – 170 – 10,4
1,0 XA11V – – • 152 – 279 10,1
2,0 XA12V – – • – 170 279 11,7
1,0 XA11VG • – • 152 – 279 10,3
2,0 XA12VG • – • – 170 279 11,9
700 2,0 0,25 XA 1 2,1 - 8,6
RFL-102▼ SELECTIONCHART
For usewith cylinder
or tool
Usable OilCapacity
(litres)
ModelNumber 1)
PressureGauge
3-way3-pos. Valve
4-way3-pos. Valve
Dimensions (mm)
(kg)
Single-acting
Single-acting
Double-acting
Double-acting
1) High-Flow coupler CR- 400 and accessories must be ordered separately. 2) Available as cyilinder-pump set, see page 58.
XA Series
XVARI®Technology,AirDrivenHydraulicFootPumps
MaximumPressure
(bar)
OutputFlow Rate
(l/min)
PumpSeries
ValveFunction
DynamicAir
Pressure
(bar)No
load Load
Advance / Hold / Retract
▼ XA-SERIESPERFORMANCECHART
OILFLOWVERSUSPRESSURE
Oilflo
w (l
/min
) ▶
Pressure (bar) ▶
Regulator-Filter-LubricatorRecommended for use with all XA-Series Air pumps.Provides clean, lubricated air and allows for air pressure adjustment.
Model Number 1)
① 3/8"-18 NPTF Oil outlet
② 1/4"-18 NPTF Air inlet
③ 4/3 Optional control valve
④ 3/8"-18 NPTF Oil outlet
at 6,9 bar dynamic air pressure
Reservoir Capacity:
1,0 - 2,0 litresFlow at Rated Pressure:
0,25l/minAir Consumption:
283-991l/minMaximum Operating Pressure:
700 bar
9998
▼
208137702081377020813770
PATG-1102NPATG-1105NPARG-1102NPARG-1105NPAMG-1402NPAMG-1405N
116
RFL-102
PA-Series,TurboIIAirHydraulicPumps
• Externaladjustablepressurereliefvalve(behindsightglass)• Return-to-tankportforuseinremotevalveapplications• Internalpressurereliefvalveprovidesoverloadprotection• Quieteroperation–reducednoiselevelto76dBA• Operatingairpressure:2,8-8,8bar,enablespumptostartat
extremely low pressure• Highefficiencycastaluminiumairmotor• Reinforcedheavy-dutylightweightreservoirforapplications
in tough environments• Airpendantforremotecontroloperation.
Compact AirOverHydraulic
Shown from top to bottom: PAMG-1402N,PARG-1102N,PATG-1102N,PATG-1105N
◀ Easily operated by hand or by foot.
Single-Acting
Usable Oil
Capacity
(cm3)
Used with
Cylinder
ModelNumber
Large Reservoir Models
The Turbo II Air Pump is also available with an enlarged reservoir: PATG-1105N,PAMG-1405N and PARG-1105N.
Hoses
Enerpac offers a complete line of high quality hydraulic hoses. To ensure the integrity of your system, specify only genuine Enerpac hydraulic hoses.
Single-Acting
Double-Acting
Page:
Regulator-Filter-Lubricator
Recommended for use with all Turbo air pumps. Provides clean, lubricated air and allows for air pressure adjustment. Steel bowl guards are standard.
Model Number
9998 www.enerpac.com
313396313396313396
700700700
1,000,761,00
PATG-1102NPATG-1105NPARG-1102NPARG-1105NPAMG-1402NPAMG-1405N
A B C D E F H J K L M
8,29,9
10,011,711,012,7
165201165201165201
211209200209267267
230230230230230230
102102102102102102
––––
3636
129131129131130132
146146
––
152152
428642864286
113112
––
113112
347437
––
315405
N
––
45004500
––
0,160,100,16
2,8 - 8,82,8 - 10,32,8 - 8,8
340227340
767676
PATGPARGPAMG
255
PA-Series,TurboIIAirHydraulicPumps
ModelNumber
PATGPAMGPARG Series
Reservoir Capacity:
2,5 - 5,0 litresFlow at Rated Pressure:
0,10-0,16l/minAir Consumption:
227-340l/minMaximum Operating Pressure:
700 bar
Turbo II Dimensions (mm)
PATG, PAMG Series
PARG Series
① Filtered ‘Permanent’ Tank Vent
② Return-to-Tank/Auxiliary Vent/Fill Tank Port
③ Hydraulic Output
④ Swivel Air Input with Filter
⑤ 4 Mounting Holes for #10 thread forming screw. Maximum depth into reservoir = 19 mm
⑥ Air Input with Filter on PARG models 1/4”-18NPTF
A / H / R *A / H / R *A / H / R *
MaximumPressure
(bar)
PumpSeries
Valve Function
OILFLOWVERSUSPRESSURE
Oilflo
w(l
/min
) ▶
Pressure(bar) ▶
Treadle 3/3
Valve Operation
Air Pendant 3/3
Manual 4/3
Output Flow Rate
(l/min)
No Load
Air Pressure
Range
(bar)
Air Con -sumption
at 5,2 bar air
(l/min)
SoundLevel
(dBA)
PATG-models use a foot or hand operated treadle to control air and valve functions.
PAMG-models use a treadle with a locking feature to control air, and a 4-way manual valve to control hydraulics.
PARG-models use air pendant for remote control.
at 6,9 bar dynamic air pressure
(kg)
Load
* Valve function: Advance / Hold / Retract.
Speed Chart
To determine how a specific pump will operate your cylinder,
see the Pump-Cylinder Speed Chart in the ‘Yellow Pages’.
Page:
101100
▼
5891311
700700
0,650,65
0,130,13
4,1 - 8,34,1 - 8,3
255255
8585
5,48,2
PA-133PA-1150
PA-133 PA-1150
PC-66
PA-Series,AirHydraulicFootPumps
• Ruggedconstruction–builtforlonglifeandeasyservice• Swivelcouplingsimplifieshydraulicconnectionand
pump operation• Three-positiontreadleprovidescylinderadvance,holdor
retract operation • Operatesinallpositionsforincreasedversatilityinuseandmounting(exceptPA-1150)
• BasemountingslotsprovidedonPA-133.
Shown: PA-1150,PA-133
Reservoir Capacity:
0,6 - 1,3 litresFlow at Rated Pressure:
0,13l/minAir Consumption:
255l/minMaximum Operating Pressure:
700 bar
ReservoirConversionKit
Double the reservoir capacity of your existing PA-133 with this easy to install conversion kit.
PASeries
Used with
Cylinder
Usable Oil
Capa city(cm3)
ModelNumber
Pressure Rating
(bar)
Output Flow Rate
(l/min)
Valve Function Air Pressure Range *
(bar)
Air Con-sump tion
(l/min)
Sound Level
(dBA)
Advance / Hold / RetractAdvance / Hold / Retract
Single- Acting
No load Load
Hydraulic Output
Fill Tank Port Fill Tank Port
Air Input
Air Input Hydraulic Output
* Recommended Regulator-Filter-Lubricator: RFL-102.
OILFLOWVERSUSPRESSUREOilflo
w(l
/min
) ▶
Pressure(bar) ▶
at 6,9 bar air pressure
Model Number
(kg)
101100 www.enerpac.com
▼
2,67,62,67,6
10,6510,6510,6510,65
700700700700
0,150,150,150,15
4,1 - 8,34,1 - 8,34,1 - 8,34,1 - 8,3
510510510510
87878787
22,727,222,727,2
3/23/24/34/3
PAM-1021PAM-1022PAM-1041PAM-1042
110
VA-2
PAM-Series,AirHydraulicPumps
• Twin air motor configuration delivers high-flow performance in first stage, up to 14 bar, for rapid cylinder advance
• 4and8litresreservoirsforusewithawiderange of cylinders
• Integralshroudprotectsairmotorsandprovideseasy portability.
Shown: PAM-1041
Reservoir Capacity:
4,0 - 8,0 litresFlow at Rated Pressure:
0,15l/minAir Consumption:
510l/minMaximum Operating Pressure:
700 bar
LockingValves
Pumps with 4/3 manual valves are available with 4/3 manual locking valves instead. Add suffix “L” to pump model number.
Page:
RemoteAirValve
For remote operation of PAM-Series air pumps. Permits either hand or foot operation.
PAM Series
Single-Acting
Double-Acting
Advance / Hold / RetractAdvance / Hold / RetractAdvance / Hold / RetractAdvance / Hold / Retract
Used with
Cylinder
Usable Oil
Cap.(litres)
Model Numberwith Shroud
Pressure Rating
(bar)
Output Flow Rate(l/min)
Valve Function Valve Type
Air Pressure Range *
(bar)
Air Con-sump tion
(l/min)
Sound Level
(dBA)1st stage 2nd stage
Hydraulic Output
On/Off Air Valve
4 Li
tres
8 Li
tres
Air Input
* Recommended Regulator-Filter-Lubricator: RFL-102.
OILFLOWVERSUSPRESSURE
Oilflo
w(l
/min
) ▶
Pressure(bar) ▶
at 6,9 bar air pressure
Model Number
(kg)
103102
▼
116
255
284028402840284028402840284028402840
–70 - 70070 - 70070 - 70070 - 70070 - 70070 - 70070 - 70070 - 700
4,04,06,610,04,06,610,020,040,0
ZA4004NX2)
ZA4204MXZA4308MXZA4610MXZA4404MXZA4408MXZA4810MXZA4420MXZA4440MX
– 2)
VM32VM33VM33LVM43VM43VM43LVM43VM43
14,014,014,014,014,014,014,014,014,0
11,011,011,011,011,011,011,011,011,0
1,81,81,81,81,81,81,81,81,8
1,31,31,31,31,31,31,31,31,3
–
245
ZA4-Series,ModularAirHydraulicPumps
• ATEX95certifiedforuseinpotentiallyexplosiveatmospheres• FeaturesZ-Classhighefficiencypumpdesign,higheroil
flow and bypass pressure• Two-speedoperationreducescycletimefor
improved productivity• Useradjustablereliefvalvebuilt-inonmanualvalves. Oilportsonvalvesare3/8"NPTF
• Optionalheatexchangerwarmsexhaustairtopreventfreezing and cools the oil
• Fullsightoillevelglasson10,20and40litresreservoirs,oil level indicators on 4 and 6,6 litres reservoirs.
Shown: ZA4208MX,ZA4420MX
Hoses
Enerpac offers a complete line of high quality hydraulic hoses. To ensure the integrity of your system, specify only genuine Enerpac hydraulic hoses.
Page:
Single-acting
Used with
Cylinder
1) See pages 110-111 for hydraulic symbols of these valves.2) For remote valve mounting order BSS1090 high pressure connecting plate.3) Actual oil flow will vary with air supply.4) Dynamic air pressure range: 4 - 7 bar.
ToughDependableInnovative
Speed Chart
To determine how a specific pump will operate your cylinder, see the Pump-Cylinder Speed Chart in the ‘Yellow Pages’.
Page:
MaximumAir Con-
sumption 4)
(l/min)
Relief ValveAdjustment
Range
(bar)
Model Number
Double-acting
UsableOil
Capacity
(litres)
ManualValve 1)
ModelNumber
Valve Function
–Advance / Retract
Advance / Hold /RetractAdvance / Hold /RetractAdvance / Hold /RetractAdvance / Hold /RetractAdvance / Hold /RetractAdvance / Hold /RetractAdvance / Hold /Retract
Output Flow Rate 3)
at7 bar
at50 bar
at350 bar
at700 bar
ATEX 95 Certified
The Enerpac ZA4-series air pumps are tested and certified according to the Equipment
Directive94/9/EC“ATEXDirective” for equipment and protective systems intended for use in potentially explosive atmospheres.
Page:
103102 www.enerpac.com
ZA4004NX2)
ZA4204MXZA4308MXZA4610MXZA4404MXZA4408MXZA4810MXZA4420MXZA4440MX
273034513135405275
–––
500––
384500584
429429490467429490442467556
152152205421152205305421505
279279279414279279419414399
142142203180142203155180269
295295356330295356305330419
A B C D HE
3,03,03,03,03,03,03,03,03,0
80 - 9580 - 9580 - 9580 - 9580 - 9580 - 9580 - 9580 - 9580 - 95
4 2 08 M X - F HA RZ
ModulairAirHydraulicPumps
ZA4Series
Reservoir Capacity:
4 - 40 litresFlow at Rated Pressure:
1,3l/minAir Consumption:
2840l/minMaximum Operating Pressure:
700 bar
Dimensions (mm) OILFLOWVERSUSPRESSURE
OilFlow(l
/min
) ▶
Pressure (bar) ▶
Model Number
▼ThisishowaZA4-Seriespumpmodelnumberisbuiltup:
1Product
Type
2Motor Type
3Flow
Group
4Valve Type
5Reservoir
Size
6Valve
Operation
7Motor
Voltage
8Options
MotorSize
(kW)
① User adjustable relief valve on all manual valves. 3/8" NPTF on A and B ports; 1/4"NPTF on auxiliary ports.
② Air inlet 1/2" NPTF③ Return Line Filter (optional)④ Oil Sight Gauge⑤ Roll Cage (optional)⑥ Oil Drain⑦ Lifting eyes (optional)⑧ Handles⑨ Skid Bar (Modelnr. SBZ-4) (optional)
SoundLevel
(dBA)
ZA4-SeriesPumpswith4-6,6litresreservoir ZA4-SeriesPumpswith10,20and40litresreservoir
at 7 bar air & 2000 l/min air consumption
(kg)
1 ProductType Z = Pump Class
2 PrimeMover A = Air motor
3 Flow Group 4 = 1,3 l/min @ 700 bar
4 ValveType 0 = No valve, with cover plate 2 = 3/2 manual valve VM32 3 = 3/3 manual valve VM33 4 = 4/3 manual valve VM43 6 = 3/3 manual locking valve VM33L
with pilot operated check 7 = 3/2 manual valve VM22 8 = 4/3 manual locking valve VM43L
with pilot operated check.
5 Reservoir Size, useable oil 04 = 4 litres 08 = 6,6 litres 10 = 10 litres 20 = 20 litres 40 = 40 litres
6 ValveOperation M = Manual valve N = No valve
7 MotorVoltage X = Not applicable
8 Options F = Return Line Filter G = 1000 bar gauge H = Heat exchanger (on 4 and 6,6 litres reservoir only) K = Skid Bar (on 4 and 6,6 litres reservoir only) N = No reservoir handles (includes lifting eyes on 10, 20 and 40 litres) R = Roll Cage
OrderingExampleModel Number: ZA4208MX-FHKZA4208MX-FHK is an air operated pump with a 3-way, 2-position manual valve, 6,6 litres reservoir, filter, heat exchanger and skid bar.
105104
▼
110
255
102010201020102040
ZG5310MX-RZG5320MX-RZG5410MX-RZG5420MX-RZG5310MX-BRZG5320MX-BRZG5410MX-BRZG5420MX-BRZG5840MX-BR
VM33VM33VM43VM43VM33VM33VM43VM43VM43L
11,511,511,511,56,56,56,56,56,5
10,710,710,710,76,26,26,26,26,2
1,81,81,81,81,81,81,81,81,8
1,61,61,61,61,61,61,61,61,6
ZG5-Series,GasolineHydraulicPumps
• FeaturesZ-Classhighefficiencypumpdesign,higheroilflow and bypass pressure
• Two-speedoperationreducescycletimefor improved productivity
• Useradjustablereliefvalvebuilt-inonmanualvalves. Oilportsonvalvesare3/8"NPTF
• Availableintwo4-cycleenginesizes:4,1kWHondaand4,8kWBriggs&Stratton
• Fullsightoillevelglassonallreservoirsallowquickandeasy oil level monitoring.
Shown: ZG5420MX-R
Single-Acting
Used with
Cylinder
UserAdjustable ReliefValve
All VM-Series directional valves have a user adjustable relief valve to
allow the operator to easily set the optimum working pressure.
Page:
1) See pages 110-112 for hydraulic symbols of these valves.
Tough,Dependable,Innovative
Speed Chart
To determine how a specific pump will operate your cylinder, see the Pump-Cylinder Speed Chart in the ‘Yellow Pages’.
Page:
Model Numberwith Roll Cage
UsableOil
Capacity
(litres)
ManualValve 1)
ModelNumber
Valve Function
Advance / Hold / RetractAdvance / Hold / RetractAdvance / Hold / RetractAdvance / Hold / RetractAdvance / Hold / RetractAdvance / Hold / RetractAdvance / Hold / RetractAdvance / Hold / RetractAdvance / Hold / Retract
Output Flow Rate(l/min)
at7 bar
at50 bar
at350 bar
at700 bar
Double-Acting
Single-Acting
Double-Acting
4-Cycle Engine Type
and Size
Honda 4,1 kW
Briggs & Stratton 4,8 kW
ZG-Series,GasolinePumpPerformance
Elevation can affect the performance of any gasoline engine. ZG-Series pumps are designed to develop rated performance at elevations up to 1500 m. For appli cations above this elevation, please consult your Enerpac office.
▼ SELECTIONCHART
105104 www.enerpac.com
ZG5310MX-RZG5320MX-RZG5410MX-RZG5420MX-RZG5310MX-BRZG5320MX-BRZG5410MX-BRZG5420MX-BRZG5840MX-BR
526452645063506386
384500384500384500384500557
600625600625600625600625714
305421305421305421305421505
419414419414419414419414399
155180155180155180155180269
B C D HE
88 - 9388 - 9388 - 9388 - 9391 - 9591 - 9591 - 9591 - 9591 - 95
116
70 - 70070 - 70070 - 70070 - 70070 - 70070 - 70070 - 70070 - 70070 - 700
106
Z 5 4 10 M X - F RG
GasolineHydraulicPumps
ZG5Series
Reservoir Capacity:
10 - 20 - 40 litresFlow at Rated Pressure:
1,6l/minEngine Size:
4,1 - 4,8 kWMaximum Operating Pressure:
700 bar
Dimensions (mm) OILFLOWVERSUSPRESSURE
OilFlow(l
/min
) ▶
Pressure (bar) ▶
Model Numberwith Roll Cage
▼ThisishowaZG-Seriespumpmodelnumberisbuiltup:
1 ProductType Z = Pump Class
2 PrimeMover G = Gasoline Engine
3 Flow Group 5 = 1,6 l/min @ 700 bar 6 = 3,3 l/min @ 700 bar (see page 106)
4 ValveType 0 = No valve, with cover plate 1)
2 = 3/2 manual valve VM32 3 = 3/3 manual valve VM33 4 = 4/3 manual valve VM43 6 = 3/3 manual locking valve VM33L
with pilot operated check 8 = 4/3 manual locking valve VM43L
with pilot operated check. 1) For remote valve mounting order BSS1090 high pressure connecting plate.
5 Reservoir Size, useable oil 10 = 10 litres 20 = 20 litres
40 = 40 litres
6 ValveOperation M = Manual valve N = No valve
7 MotorVoltage X = Not applicable
8 Factory installed options B = Briggs & Stratton gasoline engine F = Return Line Filter G = 1000 bar pressure gauge N = No reservoir handles (includes lifting eyes on 10, 20 and 40 litres) R = Roll Cage
OrderingExampleModel Number: ZG5420MX-FRThis is a 700 bar hydraulic pump, with a 4/3 manual valve, 20 litres reservoir, with a 4,1 kW Honda gasoline engine pump, return line filter and roll bar.
1Product
Type
2Motor Type
3Flow
Group
4Valve Type
5Reservoir
Size
6Valve
Operation
7Motor
Voltage
8Options
① User adjustable relief valve on all manual valves. 3/8” NPTF on A and B ports; 1/4” NPTF on auxiliary ports.
② Roll Bar③ Return Line Filter④ Oil Level Gauge⑤ Oil Drain
SoundLevel
(dBA) (kg)
HighPressureHoses
Enerpac offers a complete line of high quality hydraulic hoses. To ensure the integrity of your system, specify only genuine Enerpac hydraulic hoses.
Page:
Relief ValveAdjustment
Range
(bar)
4,1 kW Honda
4,8 kW Briggs & Stratton
ZG6-Serie9,7kWPump
The ZG6-pump has 3,3 l/min oil flow at 700 bar, Briggs & Stratton 4-cycle gasoline engine with electric start and 12 Volt charge output for accessories.
Page:
107106
▼
40 ZG6440MX-BCFH4/3 14,7 3,3 9,7 1205 x 840 x 935 152
255
• FeaturesZ-Classhighefficiencypumpdesign: – higher oil flow and bypass pressure
– patented balanced rotating pump components to reduce vibration – replaceable piston check valves that increase service life of pump components
• Two-speedoperationreducescycletimeforimprovedproductivity
• Easyserviceable9,7kW,4-cyclegasolineenginewithelectricstartand12Voltchargeoutputforaccessories
• Dualforcedairheatexchangersstabilizeshydraulic oil temperature
• Rollcageforeasyportabilityandhoisting,protectspump• Sturdywheeledcartwithcollapsiblehandles• Fullsightoillevel-glassforeasyoillevelmonitoring.
Shown: ZG6440MX-BCFH
AdjustablePressure ReliefValve
ZG-Series pumps have a manual directional control valve with a user adjustable
relief valve to allow the operator to easily set the optimum working pressure. Relief valve adjustment range 70-700 bar. Oil ports are 3/8” NPTF.
ToughDependableInnovative
▼ SELECTIONCHART
For use with
cylinder
Model Number
UsableOil
Capacity
(litres)
ManualControl
Valve Type
Valve Function
Advance/Hold/Retract
Output Flow Rate
(l/min)at
7 barat
700 bar
4-CycleEngine
Size
(kW)
Dbl-Act.
OutsideDimensions
L x B x H
(mm) (kg)
GasolineHydraulicPump
Speed Chart
To determine how a specific pump will operate your cylinder, see the Pump-Cylinder Speed Chart in the ‘Yellow Pages’.
Page:
Reservoir Capacity:
40 litresFlow at Rated Pressure:
3,3l/minEngine Size:
9,7 kWMaximum Operating Pressure:
700 bar
ZG6 Series
107106 www.enerpac.com
▼
89898989
25253333
140140140140
3,83,87,67,6
700700700700
PGM-2304R*PGM-2404R*PGM-2308R*PGM-2408R*
3,23,23,23,2
0,660,660,660,66
116
3/34/33/34/3
By-Pass Pressure
(bar)
ManualValveType
Valve Function Sound Level
(dBA)
Advance / Hold / RetractAdvance / Hold / RetractAdvance / Hold / RetractAdvance / Hold / Retract
Shown: PGM-2408R
PGM-Series,GasolineHydraulicPumps
• PatentedGenesisTechnologymeans - coaxial piston design ensures high performance - first-stage piston pump for improved efficiency
• Highby-passpressuresimproveproductivity• AllAtlaspumpsfeaturesturdyrollcageforuseintough
environments• Four-cycleHondamotor2,2kW.
Single-Acting
Double-Acting
Single-Acting
Double-Acting
Usable Oil
Capacity(litres)
Used withCylinder
PressureRating
(bar)
Output Flow Rate(l/min)
ModelNumber
1st stage 2nd stage
Hoses
Enerpac offers a complete line of high quality hydraulic hoses. To ensure the integrity of your system, specify only Enerpac hydraulic hoses.
Page:
* Note: The PGM-20 series are available with a carrying handle instead of a roll cage. For ordering omit the ‘R’ from the model number
PGM Series
Reservoir Capacity:
4 - 8 litresFlow at Rated Pressure:
0,66l/minMotor Size:
2,2 kWMaximum Operating Pressure:
700 bar
OILFLOWVERSUSPRESSURE
OilFlow(l
/min
) ▶
Pressure(bar) ▶
(kg)
108
130
256
108
ValvingHelp
See Basic System Set-Up and Valve Information in our ‘Yellow Pages’.
Page:
Enerpac hydraulic valves are available in a
wide variety of models and configurations.
Whatever your requirements… directional
control, flow control, or pressure control…
you can be sure that Enerpac has the
correct valve to match your application
exactly.
Designedandmanufacturedforsafe
operation up to 700 bar, the range of
Enerpac valves allows for direct pump
mounting, remote mounting, manual or
solenoid actuation, and in-line installation,
giving you flexible solutions to control your
hydraulic system.
PressureandFlow ControlValves
For more hydraulic system control with pressure relief valves, shut-off valves,
check valves and sequence valves see our “System Components”.
Page:
DirectionalControlValves
109www.enerpac.com
▶
▶
▶
110
112
VMVE
VC
113VMVE VC
ValveType Series Page
DirectionalControlValvesSectionOverview
Pump Mounted Manual and Solenoid Directional Control Valves
Remote Mounted Manual Directional Control Valves
Valve Dimensions
110
▼
PumpMountedDirectionalControlValvesShown from left to right:VM32,VE33,VM33,VM43L,VE43
• Advance/RetractandAdvance/Hold/Retractoperationofsingle-acting and double-acting cylinders and tools
• Manualorsolenoidoperation• PumpmountingwillretrofitonmostEnerpacpumps• Available“locking”optiononVMSeriesvalvesforload-
holding applications• Standard“locking”featureonVESeries3-positionvalves• Useradjustablereliefvalveallowstheoperatortoeasily
set the working pressure.
Reliable Control of SingleandDouble-Acting Cylinders and Tools
▼ Enerpac wind turbine levelling system with a VM-33L manual valve, used to accurately level the transition piece after installation on the foundation pile.
Used with Cylinder
Valve Operation
ValveType
Solenoid 24 VDC
Double-acting 4-Way, 3-Position, Tandem Center
For remote valve information, see page 112.
Solenoid 24 VDC
Single-acting 3-Way, 3-Position, Tandem Center
Solenoid 24 VDC
Single-acting 3-Way, 2-Position, Dump
Solenoid 24 VDC
Single-acting 3-Way, 2-Position
Manual Double-acting 4-Way, 3-Position,Tandem Center,
Locking
Manual Single-acting 3-Way, 3-Position,Tandem Center,
Locking
Manual Double-acting 4-Way, 3-Position,Tandem Center
Manual Single-acting 3-Way, 3-Position,Tandem Center
Manual Single-acting 3-Way, 2-Position
111www.enerpac.com
ZCP-1ZCP-3
VE32DVE32, VE33, VE43
9,3
91
VE43
VE33 9,3
VE32D 3,9
VE32 3,9
VM43L 4,9
VM33L 4,8
VM43 3,1
VM33 3,0
VM32 2,5
121
PumpMountedDirectionalControlValves
VM VESeries
Max. Flow Capacity:
17l/minMaximum Operating Pressure:
700 bar
LockingValves
For applications that require positive load holding, VM-Series valves (except VM32 valve) are available
with a pilot-operated check valve. This option provides hydraulic locking of the load until the valve is shifted into the retract position.
PendantsforVE-SeriesSolenoidValves
When ordering Enerpac VE-Series solenoid valves, the pendant must be
ordered separately for Z-Class. Pendant connection to be plugged into electric box of pump.
To be used with solenoid valves:
PendantModel Nr.
Model Number
Schematic Flowpath
Advance Hold Retract (kg)
Hydraulic Symbol
Adjustable relief valve
All valves feature several gauge ports for “system”, A port and B port pressure
monitoring. User adjustable relief valves are included on all models to allow the operator to easily set the optimum working pressure for each application.
VM33 and VE43 valves include “System Check” feature, for more precise pressure holding and improved system control. The VM33 has improved porting which provides faster cylinder retraction while motor is running.
See page 113 for valve dimensions.Page:
Page:
Fittings
For additional fittings see the fitting page of the System Components section in this catalogue.
112
▼
2,9
4,7
2,9
4,7
2,9
4,7
2,9
4,7
VC-4
VC-4L
VC-20
VC-20L
VC-15
VC-15L
VC-3
VC-3L
RemoteManualDirectionalControlValves
ValveOperation
Manual
Valve Type
4-Way, 3-Position, Closed Center
Manual 4-Way, 3-Position, Closed Center, Locking
Manual 4-Way, 3-Position, Tandem Center
Manual 4-Way, 3-Position, Tandem Center, Locking
ModelNumber
Schematic Flowpath
Advance
HydraulicSymbol
(kg)
LockingValves
For applications that require positive load holding, VC-Series valves are available with a pilot-
operated check valve. This option provides hydraulic locking of the load until the valve is shifted into the retract position.
• Advance/Hold/Retractoperationforusewithsingle-actingor double-acting cylinders and tools.
Manual
Manual
Manual
Manual 3-Way, 3-Position, Tandem Center
3-Way, 3-Position, Tandem Center, Locking
3-Way, 3-Position, Closed Center
3-Way, 3-Position,Closed Center, Locking
Shown from left to right:VC-20,VC-4L
Return line kit included with remote valves.
Remote Control of SingleandDouble-Acting Cylinders and Tools
Used with
Cylinder Hold Retract
Double-Acting
Double-Acting
Double-Acting
Double-Acting
Single-Acting
Single-Acting
Single-Acting
Single-Acting
113www.enerpac.com
VM32
VM33,VM33L,VM43,VM43L
VE33
VC-3,VC-3L,VC-15,VC-15LVC-4,VC-4L,VC-20,VC-20L
VE32D
VE43
121
124
256
DirectionalControlValvesDimensions
VM VE VCSeries
Max. Flow Capacity:
17l/minMaximum Operating Pressure:
700 bar
1) VM33L and VM43L only
① User Adjustable Relief Valve
② Auxiliary Port
1) VC-3L, VC-15L, VC-4L and VC-20L only
PumpMountedDirectionalControlValves
RemoteManualDirectionalControlValvesFittings
For additional fittings see the fitting page of the System Components section in this catalogue.
Gauges
Minimize the risk of overloading and ensure long, dependable service from your equipment. Refer
to the System Components Section for a full range of gauges.
Page:
ValvingHelp
See Basic System Set-Up and Valve Information in our ‘Yellow Pages’.
Page:
Page:
114114
245
EnerpacSystemComponents:
All the additional elements you need to
complete your high pressure hydraulic
system and get started.
Engineered to work with your Enerpac
cylinders, pumps and tools, all Enerpac
components are designed to the most
exacting standards.
With this complete line of hydraulic
hoses, couplers, fittings, manifolds, oil
and gauges, Enerpac has the accessories
to complement your system and ensure
the efficient operation, long life and safety
of your hydraulic equipment.
SystemComponents&Valves
YellowPages
For sample system set-ups and how to correctly specify your system components,
please view the Enerpac “Yellow Pages” section in this catalogue.
Maintain System Integrity
Use Enerpac System Components, designed to interface with Enerpac
cylinders, pumps and tools to ensure your system operates at peak performance.
Page:
115www.enerpac.com
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
H700
A, C,F, T
HF
A
AM
BFZFZXSCGFGP
GH
T
DGR
GA45
GANVVV
116
118
120
120
120
121
122
124
126
127
128
129
130
SystemComponents&ControlValvesOverview
Hoses
Couplers
Hydraulic Oil
Manifolds
Control Manifolds
Fittings
Force GaugesPressure Gauges
Pressure Gauges, glycerine filledPressure Gauges, dry
Test System Gauges
Digital Pressure Gauges
Gauge Adaptor Assembly
Gauge Accessories
Pressure and Flow Control Valves
Component Type Series Page
116
▼
¼”NPTF
⅜”NPTF
A-604
A-630
AH-604
AH-630
C-604
CH-604
246
H700-Series,HighPressureHosesShown: HC-7206
Thermo-Plastic Safety Hoses (700-Series)
• Fordemandingapplications,featuringa4:1safetyfactor
• Maximumworkingpressureof700bar
• Outsidejacketispolyurethane,toprovidemaximumabrasion resistance
• Exhibitslowvolumetricexpansionunderpressuretoenhance overall system efficiency
• Crimped-onrubberstrainreliefforimprovedlifeanddurability on all models.
Safety and Quality
To ensure the integrity of your system, specify only Enerpac hydraulic hoses.
WARNING !
•Donotexceed700barmaximumpressure.
•Donothandlehoseswhichareunder pressure.
More safety instructions in our ‘Yellow pages’.
Page:
▼HoseEndCouplings
▼ To prevent back pressure and to increase cylinder retraction speed, when using long hoses with single-acting cylinders, the Enerpac HC-7300-Series of hoses with increased internal diameter is the best choice.
117www.enerpac.com
¼”nptf
⅜”nptf
CH-604
⅜”nptf
A-630
CH-604
⅜”nptf
A-604
AH-604
AH-630
C-604
CH-604
CH-604
⅜”nptf
CH-604
––
1,8–
1,80,60,91,83,06,19,115–
1,8–––
1,83,01,80,91,83,00,91,83,06,11,8151,8–
3,06,19,1151,83,06,1
––
1,1–
1,00,50,70,91,42,84,57,0–
1,1–––
1,01,51,01,01,31,80,81,01,52,91,17,01,6–
2,44,57,3
11,51,72,55,1
6,4
9,7
––HB-7206QB–HC-7206QH-7202H-7203H-7206H-7210H-7220H-7230H-7250–HA-7206B–––HA-7206HA-7210HB-7206HC-7203BHC-7206BHC-7210BHC-7203HC-7206HC-7210HC-7220HC-7206CHC-7250CH-7306–H-7310H-7320H-7330H-7350HC-7306HC-7310HC-7320
200
121
HighPressureHydraulicHoses
Hose End Assemblies and Couplers *
Internal Diameter
(mm)
Model Number
Hose Length
(m)End one End two
HoseOilCapacity
When using greater hose lengths, it is sometimes necessary to fill the pump reservoir after filling the hoses. To determine the hose oil capacity, use the following:
For 6,4 mm inside diameter hoses: Capacity (cm3) = 32,1699 x Length (m)
For 9,7 mm inside diameter hoses: Capacity (cm3) = 73,8981 x Length (m)
H700Series
Inside Diameter:
6,4 - 9,7 mmLength:
0,6 -15 mMaximum Operating Pressure:
700 bar
* For technical information on couplers see next page.
TorqueWrenchHoses
Use Enerpac twin safety hoses with double-acting wrenches to ensure the integrity of your hydraulic system.
Fittings
For additional fittings see the fitting page of the System Components section.
Page:
Page:
(kg)
118
▼
246
3/8" High Flow Couplers• StandardequipmentonmostEnerpaccylinders• RecommendedforuseonallEnerpacpumpsandcylinders
where space and porting permits• Includes“2-in-1”dustcapforuseonmaleandfemalecouplers
3/8" High Pressure ‘Flush-face’ Couplers• Featuring“Push-to-connect”operation,toguaranteegood
connection every time• Flush-face,zero-leakoperationforminimalspillage• HTMA*recognizedforsafetyandperformance• Willnotinterchangewithlowpressurecouplers
3/8" Regular Spee-D-Couplers®
• Formediumdutyapplicationswithhandpumps• Includesfemalealuminiumdustcap
1/4" Regular Couplers• Forusewithsmallcylindersandhandpumps• Includesfemalealuminiumdustcap
1/4" Spin-on Torque Wrench Couplers• Forusewith700barSandW-Seriestorquewrenches, THQ-Serieshosesand700bartorquewrenchpumps
1/4" Lock-ring Torque Wrench Couplers• Forusewith800barHXDandSQD-Seriestorquewrenches, THC-Serieshosesand800bartorquewrenchpumps.
A,C,F,T-Series,HydraulicCouplers
Quick Connection ofHydraulicLines
Shown: FH-604,FR-400,AR-630,C-604,AH-604,AR-400
Thread sealer
To seal nPTF threads use one of the new anaerobic thread sealers or Teflon paste. When using Teflon Tape,
apply the tape one thread from the end of a fitting to prevent it from winding up in the hydraulic system.
WARNING!
Couplers should be pressurized only when completely connected and
should not be coupled or uncoupled when pressurized.
More safety instructions in our ‘Yellow Pages’.
Page:
▼ with the use of Enerpac high flow couplers, hoses are easily installed for multiple hydraulic line connections in this 34 points PLC-controlled lifting system.
F-Series
Flush-faced couplers provide reduced pressure drop versus other types and are preferred
in dirty, grimy construction and mining environments due to easy clean, non-dirt trapping faces.
* Hydraulic Tool Manufacturers Association.
119www.enerpac.com
CR-400
FR-400
AR-400
AR-630
TR-630
CFF-250
CH-604
FH-604
AH-604
AH-630
TH-630
CMF-250
83
111
77
66
73
76
64
72
42
35
60
58
⅜"nPTF
⅜"nPTF
⅜"nPTF
¼"nPTF
¼"nPTF
¼"nPTF
35
31
28
22
29
23
36
31
26
20
29
28
32
27
23
19
19
24
25
29
19
15
21
22
35
40
7,6
7,6
11,4
6,1
C-604
F-604
A-604
A-630
T-630
–
A* B C D E F G
HydraulicCouplers
Complete Set
Maximum Flow
Capacity(l/min)
Female Half
Male Half
Dust Cap(s)Modelnr.
(2x)CD-411
–
Z-410female only
Z-640female only
–
–
Coupler Type
700 bar High-Flow Coupler
MetalDustCaps
Steel dust caps are available for the C-604 series couplers. Order model number: CD-411M for female half CD-415M for male half
A, C,F, TSeries
Maximum Flow Capacity:
6,1-40,0l/minThread:
¼"-⅜"NPTFMaximum Operating Pressure:
700 - 800 bar
700 bar Flush-Face coupler
700 bar Regular Spee-D-Coupler©
700 bar Regular Coupler
Model Numbers Dimensions (mm)
* Value A is total length when male and female half are connected.
700 bar Spin-on Coupler
800 bar Lock-ring Coupler
CT-604 Safety Tool
Use the Enerpac CT-604 to relieve hydraulic back pressure by safely bleeding the hydraulic coupler.
NOTE: For use on C-Series 700 bar High-Flow Couplers only
Minimize injuries from projectile parts and under-skin hydraulic fluid injections by eliminating unsafe coupler bleeding practices. The CT-604 is Enerpac-engineering safe for use at 700 bar.
120
▼
A-64
A-65
A-66
AM-21
AM-41
HF-95X HF-95YHF-95T
A-64 A-65
AM-21 AM-41
Use only genuine Enerpac Hydraulic Oil . The use of any other fluid will render your Enerpac warranty null and void .
HydraulicOil,ManifoldsandFittings
7-port Manifold, short
Description Dimensions (mm)Model Number
• Maximumpumpvolumetricefficiency
• Maximuminternalheattransfer
• Preventspumpcavitation
• Additivespreventrust,oxidation and sludge
• Highviscosityindex• Maximumfilmprotective
lubricity.
1 litre5 litres20 litres
Model Number
Contents
Shown: HF-95T,HF-95X,HF-95Y
The Genuine Range
HydraulicOil
Manifolds
Viscocity Index 100 minViscocity (cSt @ 40 ˚C) 32API Gravity 31-33Density (cSt @ 15 ˚C) 875Flash point 204 ˚CPour point 32 ˚CColour BlueWorking Temperature Range 0 - 60 ˚CIdeal working temperature 40 ˚C
▼OILSPECIFICATIONCHART
7-port Manifold, longallows direct moun ting of control valves to the manifold.
6-port Manifold, hexagonPlugs furnished for all ports ⅜"-18 NPTF.
Control ManifoldsFor control of two or four single-acting cylinders simultaneously. AM-21 with 5 ports ⅜"NPTF. AM-41 with 7 ports ⅜"NPTF.
121www.enerpac.com
29
3/8”-18NPTF
51
29
443042
231928
¼"-18 NPTF⅛"-27 NPTF⅜"-18 NPTF
⅜"-18 NPTF¼"-18 NPTF½"-18 NPTF
FZ-1055FZ-1642FZ-1634
35314343
19192424
¼"-18 NPTF⅛"-27 NPTF¼"-18 NPTF⅜"-18 NPTF
G¼"G¼"G⅜"G⅜"
BFZ-16411BFZ-16421BFZ-16323BFZ-16324
192819
192219
¼"-18 NPTF¼"-18 NPTF
G¼"
⅜"-18 NPTF½"-14 NPTF⅜"-18 NPTF
FZ-1630BFZ-1630BFZ-16301
45 25 ⅜"-18 NPTF –FZ-1613
23 33 ⅜"-18 NPTF ⅜"-18 NPTFFZ-1616
28
47
25
29
⅜"-18 NPTF
½"-14 NPTF
¼"-18 NPTF
⅜"-18 NPTF
FZ-1615
FZ-1625
385137
161919
¼"-18 NPTF⅜"-18 NPTF⅜"-18 NPTF
¼"-18 NPTF⅜"-18 NPTF⅜"-18 NPTF
FZ-1608FZ-1619FZ-1617
2929
2319
⅜"-18 NPTF¼"-18 NPTF
⅜"-18 NPTF¼"-18 NPTF
FZ-1614FZ-1605
4545
2524
⅜"-18 NPTF¼"-18 NPTF
––
FZ-1612FZ-1637
3336
2024
⅜"-18 NPTF¼"-18 NPTF
––
FZ-1610FZ-1638
¼"-NPTF¼"-NPTF½"-NPTF
⅜"-NPTF⅛"-NPTF⅜"-NPTF
G¼" G¼"G⅜"G⅜"
¼"-NPTF⅛"-NPTF¼"-NPTF⅜"-NPTF
⅜"-NPTF¼"-NPTF⅜"-NPTF
¼"-NPTF½"-NPTFG¼"
¼"-NPTF⅜"-NPTF⅜"-NPTF
¼"-NPTF⅜"-NPTF⅜"-NPTF
⅜"-NPTF¼"-NPTF
⅜"-NPTF¼"-NPTF
⅜"-NPTF¼"-NPTF
⅜"-NPTF¼"-NPTF
⅜"-NPTF¼"-NPTF
BFZ-16312 56 26 ⅜"-18 NPTF ⅜"-18 NPTF
⅜"-NPTF¼"-NPTF
FZ-1660 40 22 ⅜"-18 NPTF ⅜”-18 NPTF
A B C D
HydraulicOil,ManifoldsandFittings
Model Number Dimensions (mm)
A, AMBFZFZHF Series
AdaptorFrom: To:
AdaptorFrom: To:
ReducerFrom: To:
Elbow
Tee
CrossFrom: ⅜"-NPTF FemaleTo: ⅜"-NPTF Female
Coupling
Street ElbowFrom: ⅜"-NPTF MaleTo: ⅜"-NPTF Female
HexagonNipple
Reducing ConnectorFrom: ⅜"-NPTF FemaleTo: ¼"-NPTF FemaleFrom: ½"-NPTF FemaleTo: ⅜"-NPTF Female
700 bar Fittings
From: To:
From: To:
From: To:
From: To:
Street TeeFrom: ⅜"-NPTF FemaleTo: ⅜"-NPTF Male
Swivel FittingFrom: ⅜"-NPTF MaleTo: ⅜"-NPTF Female
3/8"SwivelConnector
360 degree swivel coupler for optimal orientation of the hydraulic connection on cylinders, pumps and hoses. Order Model Nr. XSC-1.
122
▼
130
130
All CylindersAll CylindersAll 5 ton CylindersAll 10 ton CylindersAll 25 ton RC-CylindersAll 50 ton RC, RR-Cylinders 13 ton RCH-SeriesRCS-201, 302 RCS-502, 1002 RCH-202, 302, 603All 25, 30, 50 ton cylindersAll 75, 100 ton cylindersAll 150, 200 ton cylinders10 ton VLP Presses 25 ton XLP Presses50 ton XLP, BPR Presses100 ton VLP, BPR Presses200 ton VLP, BPR Presses
HydraulicForce&PressureGauges
SnubberValveV-91
Infinitely adjustable for metering oil out of a gauge. The V-91 Snubber Valve is also suitable as a shut-off
valve to protect the gauge during high cycle applications.
• GF-seriesgauges:calibratedwithdualscalereadingforpressure and force in bar and kN
• GF-seriesgauges:allpressuresensingpartsaresealedand dampened by glycerine for long life
• GP-seriesgauges:calibratedwithdualscalereadingforpressure in bar and psi
• Excellentreadability:gaugefacedimensions100mm• Fast,easyinstallation• Stainlesssteelgaugecasesforcorrosionresistance.
VisualReferenceforSystemPressureand Force
▼ A GP-10S gauge is used on this press to check the hydraulic pressure required to bend flat steel bar.
Shown from left to right: GF-230B,GF-835B,GP-10S
Used With
Auto-DamperValveV-10
For automatic control of gauge fluctuations, the V-10 Auto-Damper Valve controls the movement of the gauge
needle by restricting oil flow in and out of the gauge. No adjustments needed.
Page:
Page:
123www.enerpac.com
GP-10SGP-15SGF-5BGF-10BGF-20BGF-50BGF-120BGF-230BGF-510BGF-813BGF-835BGF-871BGF-200BGF-10BGF-20BGF-50BGF-871BGF-200B
•••••••••
•••
•••••••••
•••
••••
••
½" nPTF
½" nPTF
½" nPTF
½" nPTF
½" nPTF
½" nPTF
½" nPTF
½" nPTF
½" nPTF
¼" nPTF
¼" nPTF
¼" nPTF
¼" nPTF
½" nPTF
½" nPTF
½" nPTF
¼" nPTF
¼" nPTF
0-7000-1000
––––––––––––––––
129
GA-1 GA-2 GA-3
0-10.0000-15.000
––––––––––––––––
––
0-7000-7000-7000-7000-7000-7000-7000-7000-7000-7000-7000-7000-7000-7000-7000-700
––
0-450-1000-2320-5000-124
0-175/2750-450/900
0-210/320/5700-232/300/500
0-720/9300-1400/2000
0-1000-2320-500
0-720/9300-1400/2000
HydraulicForce&PressureGauges
Gauge AdaptorThreadG
Units per Division ModelNumber *
bar bar
Pressure Range:
0 - 1000 bar
GFGPSeries
Gauge Type and Calibration
Required
PressureGauges
To measure the input pressure into cylinders or high pressure systems. Also for all testing applications.
Force Gauges
To measure external load supported by a cylinder or jack in kN. For pressing parts together under pre-determined loads, weighing, testing, etc.
GP-Series are dry gauges.GF-Series are glycerine filled gauges.
MaximumIndicatorPointer
Indicator retains peak readings of pressure or force generated by the system.
Can easily be installed on GP and H-Series gauges. Order model nr: BSA-881.
10 bar, 100 psi10 bar, 200 psi10 bar, 0,5 kN10 bar, 1 kN10 bar, 2 kN10 bar, 5 kN10 bar, 1 kN
10 bar, 2 + 5 kN10 bar, 5 + 10 kN
10 bar, 5 kN10 bar, 5 kN
10 bar, 10 kN10 bar, 25 kN10 bar, 1 kN10 bar, 2 kN10 bar, 5 kN
10 bar, 10 kN10 bar, 25 kN
psi kN
Force Range:
0 - 2000 kNGauge Face Diameter:
100 mmAccuracy, % of full scale:
±1%
* GF-Series Force gauges with imperial scale reading (psi, lbs) are available by changing the suffix ‘B’ into ‘P’.
GP-serie GF-serie
124
▼
129
128
130
G,H-Series,HydraulicPressureGauges
◀ when lifting or pressing, always use a gauge. A gauge is your ‘window’ to the system. It lets you see what’s going on.
Shown from left to right: H4049L,G-2534R,G-4089L,G-2535L,G-4040L
Glycerine Filled (G-Series)• Dualscalereadingcalibratedinbarandpsi• Allpressuresensingpartssealedanddampenedby
glycerine for long life• Includessafetyblow-outdiskandpressureequalizing
membrane• Gaugesnubbersorneedlevalvesrecommendedforhigh
cycle applications.
High Cycle Dry Gauges (H-Series)• Dualscalereadingcalibratedinbarandpsi• Idealforuseinmanyapplications,specificallyforhigh
cycle and harsh environments• Gaugesnubbersorneedlevalvesrecommendedtoshut
off gauge when not in use.
VisualReferenceof System Pressure
Gauge adaptor
For easy gauge installation into almost any system, Enerpac offers a complete line of gauge adaptors.
GA45GC Gauge adaptor assembly
45˚ Angled gauge adaptor improves safe working conditions.
Page:
Page:
SnubberValveV-91
Infinitely adjustable for metering oil out of a gauge. The V-91 Snubber Valve is also suitable as a shut-off
valve to protect the gauge during high cycle applications.
Page:
125www.enerpac.com
0-1000-1600-2000-3000-600
0-1.0000-2.0000-3.0000-6.0000-10.0000-15.0000-10.000
G2509LG2510LG2511LG2512LG2513LG2514LG2515LG2516LG2517LG2535LG2536L–
–––––G2531R––G2534RG2537RG2538R–
–––––––––G4088LG4089LH4049L
–––––––––G4039LG4040LH4071L
10105050
100100500500
100020003000
–
–––––––––
100030001000
2255
10205050
100200200
–
–––––––––
100200100
0-70-110-140-200-400-700-1400-2000-4000-7000-10000-700
1115
10101050
100100100
–
–––––––––
100100100
0,010,020,020,50
1155
101020–
–––––––––
102010
ø 63 ø 100 ø 63 ø 100 ø 63 ø 100 ø 63 ø 100
6363100100
6363100100
37372949
84–
121136
–63––
¼" nPTF
¼” nPTF
¼” nPTF
½” nPTF
A B C D E
Size
(mm)
Dimensions (mm)Connection
HydraulicPressureGauges
Accuracy, % of full scale:
±1,0-1,5%
Face Diameter:
63 - 100 mm
Pressure Range:
0 - 1000 bar
GHSeries
Lower MountCenter RearLower MountLower Mount
Note: dimensions for reference only.
MaximumIndicatorPointer
Indicator retains peak readings of pressure or force generated by the system.
Can easily be installed on GP and H-Series gauges. Order model nr: BSA-881.
Model Number
G-Series
H-Series
ø 63¼" NPTF
Lower Mount
Pressure RangeGauge Series
ø 63¼" NPTF
Center Rear
ø 100¼" NPTF
Lower Mount
ø 100½" NPTF
Lower Mount
Major Graduation
Minor Graduation
▼SELECTIONCHART
Major Graduation
Minor Graduation
psibar
(bar) (psi) Accuracy: ± 1,5 % Accuracy: ± 1,0 %
126
▼
0-10000-5000
0-10.0000-20.0000-40.0000-50.000
T-6001LT-6002LT-6003L–––
––T-6007LT-6008LT-6010LT-6011L
100500
1.0001.0005.0005.000
1050
100100200200
0-70 1)
0-350 1)
0-700 1)
0-1400 1)
0-2800 2)
0-3500 2)
1050
100200500500
15
10202050
71
T-6001LT-6002L T-6003L
T-6007LT-6008L
T-6010LT-6011L
Test System Gauges
T Series
Accuracy, % of full scale:
±0,5-1,5%
Face Diameter:
162 - 192 mm
Pressure Range:
0 - 3500 bar
Cone Mount Gauge Adaptor
Contains fittings to connect ¼" cone fitting gauge to ⅜" cone system. Kit includes
43-301 tee, 43-704 gauge adaptor and 45-116 tubing. Order model number: 83-011.
Cone Mount Gauge Connector
For connecting gauges with 0.25" cone fitting directly to model number 11-100 or
11-400 pump (page 70). May be used with other 0.25" cone systemsOrder model number: 43-704
▼ An Enerpac P-2282 hand pump equipped with a T-6011L test system gauge is used for proof pressure testing of hydraulic valves.
Page:
Gauge shown: T-6003L
Pressure Range
(bar)
Alloy Steel
½" NPTF
Stainless Steel 0,25 cone
Number Inter vals
(bar)
Gradu-ation Inter -vals(bar)
Model NumberPressure Range
(psi)
Number Inter vals
(psi)
Gradu-ation Inter -vals(psi)
• Dualscalereadingcalibratedinbarandpsi• Allgaugeshavespring-loadedbackswithrubber
blow-out plugs to protect case assembly in case of over-pressurization
• Integralmaximumindicatorpointerstandardincluded• 2800and3500barmodelsincludeflangemounting• ½"NPTFversionsaremadeofhighstrengthalloysteel• 0.25"conemodelsaremadeof316stainlesssteel,
with 403 stainless steel on 2800 and 3500 bar models.
1) Acccuracy ± 0,5%2) Acccuracy ± 1,5%
127www.enerpac.com
▼
129
DGR-20,10-1380 0,010-140 10-20.000 0,10-1400
DigitalHydraulicPressureGauge
• Ratedforsystempressureupto1380bar• Displayshighpressureinbar,psi,MPaandkg/cm2 • Zeroreset-ensuresthatgaugereadsactualpressure• IP65protection• 3Voltbatteryincluded(typeCR2430),conditionindicator
on read-out• Shut-offslectable–menudriven• Protectivecoverincluded.
Gauge adaptor
For easy gauge installation into almost any system, Enerpac offers a complete line of gauge adaptors.
Gauge shown:DGR-2
DGRSeries
Accuracy, % of full scale:
±0,25%
Voltage:
3Volt(battery)
Pressure Range:
0 - 1380 bar
Page:
High PressureRating
(bar)
Model Number
Weight: 0,23 kg.
Range Interval
High PressureRating
(MPa)
Range Interval Range Interval
High PressureRating
(psi)
Range Interval
High PressureRating
(kg/cm2)
128
▼
0 - 10.0000 - 700CR-400⅜" -18G2535LGA45GC
GA45GC SeriesConnection 1:
3/8"NPTFmaleConnection 2:
CR-400 couplerOperating Pressure:
700 bar
Gauge Adaptor AssemblyShown: GA45GC
45° Angled gauge adaptor improves safe working conditions
• 45°angledgaugeimprovesvisibility
• Slimandnarrowdesign
• Easytofitinabroadrangeofsystems
• Maximizecontrolledloadmovement
• Glycerindampenedgaugewithdualscale
• EnerpacHighFlowfemalecoupler.
▼ The Gauge Adaptor Assembly is the window to your system; allows easy reading of the pressure for safe operation.
Gauge Range (bar) (psi)
Female End(3/8" NPTF)
Male End(NPTF)
Gauge Port(1/4" NPTF)
ModelNumber
129www.enerpac.com
▼
117 43 ½" NPTF 28,5 ½"
NPTF 29 38
GA-1GA-2GA-3GA-4
GA-918
½"½"¼"½"
⅜"⅜"⅜"¼"
71155133111
31354835
32323232
½" NPTF
½" NPTF
¼" NPTF
½" NPTF
⅜" NPTF
⅜" NPTF
⅜" NPTF
¼" NPTF
⅜" NPTF
⅜" NPTF
⅜" NPTF
⅜" NPTF
4,34,8
5789
2932
¼" NPTF
½" NPTF
5764
¼" NPTF
½" NPTF
⅜"
NV-251V-91
A B C D
A B C D E F
CBA D E S S1
4632
E
1937
F H
1937
GA-1
GA-2, GA-3, GA-4
NV-251
V-91
NeedleValves(V-andNV-Series)•BothNV-251andV-91providepositiveshut-off•303stainlesssteelstem,16threads/in(NV-251).
SwivelAdaptor(GA-918)•Simplifiesgaugeinstallationandreading.
GA,NV,V SeriesOperating Pressure:
700 bar
Model Number
Model Number
Ori fice(mm)
Thread Size
Model Number
Gauge Port
(NPTF)
Male End
(NPTF)
Female End
(NPTF)
Dimensions (mm)
Dimensions (mm)
Dimensions (mm)
GaugeAdaptors(GA-Series)•Foreasymountingofapressuregaugeontoyoursystem•Maleendscrewsintopumporcylinderport,femaleendacceptshoseor
coupler, 3rd port is for gauge connection•GA-918providesforswivelconnection.
Shown from left to right: GA-3,V-91,GA-1,GA-2,GA-4,NV-251,GA-918
▼ A gauge is easily installed into your hydraulic system using a gauge adaptor.
Gauge Accessories
130
▼
250
V-91V-82 V-182 V-8F
V-10 V-17 V-42
V-66,V-66NV V-66F V-152,V-152NV V-161
ValveApplications
To see these valves used in typical hydraulic circuits, please see our ‘Yellow Pages’.
Page:
PressureandFlowControlValves
• Allvalvesareratedfor700baroperatingpressure• AllvalvesfeatureNPTFporting to insure against leakage at
rated pressure• Allvalvesarepainted,coated,orplatedforcorrosionresistance• Viton®seals(inV-66NVandV-152NV)forhightemperature
applications, nickel-plated for maximum corrosion resistance.
From left to right: V-152,V-66,V-82,V-161,V-42,V-17
Valve dimensions in mm
YourHydraulicControl Solution
▼ The V-152 pressure relief valve limits the pressure or force developed in the hydraulic system.
131www.enerpac.com
120 121
PressureandFlowControlValves
V Series
Maximum Operating Pressure:
700 bar
NeedleValveV-82V-182V-8F
SnubberValveV-91
AutoDamper® ValveV-10
CheckValveV-17
PilotOperated CheckValveV-42
ManuallyOperatedCheckValveV-66,V-66NV*V-66F
PressureRelief ValveV-152V-152NV*
SequenceValveV-161
Hydraulic Symbol
V-82: To control cylinder speed. Can also be used as shut-off valve for temporary load holding. ⅜" NPTF female ports.V-182: Same as V-82, but with
¼" NPTF female ports. Also suitable for gauge snubbing (also V-82).V-8F: Like V-82, but with very fine metering for precise flow control. Not recommended as shut-off valve.
V-91: Infinitely adjustable for metering oil out of a gauge to prevent snapping of gauge pointer when load or pressure is suddenly released. Also suitable as shut-off valve to
protect the gauge during high cycling applications. ½" NPTF male and female threads for use with GA-1, GA-2 or GA-4 gauge adaptors.
V-10: To be used when gauge pressure must be monitored during high cycle applications. Creates a flow resist ance when load is released sudden ly.
No adjust ments are necessary. ½" NPTF male and female threads for use with GA-1, GA-2 or GA-4 gauge adaptors.
V-17: Ruggedly built to resist shock and operate with low pressure drop. Closes smoothly without pounding. ⅜" NPTF female port.
V-42: Can be mounted at the cylinder to hold the load in case of system pressure loss. Normally used with double-acting cylinders where pilot port receives pressure from a Tee-
fitting in the cylinder retract line.⅜" NPTF female ports.Pilot presure ratio 14% (6,5:1).
V-66,V-66NV: For load holding applications with single and double acting cylinders. Valves allow oil to flow back to tank when cylinder retracts. V-66NV with Viton seals,
nickel-plated.V-66F: Similar to V-66, but with very fine metering capability for precise flow control. V-66F is not designed for load holding.
V-152: Limits pressure developed by the pump in hydraulic circuit, thus limiting the force imposed on other components. Valve opens whenever preset pressure is reached.
To increase pressure setting, turn handle clockwise. Includes:•0,9mreturnlinehosekit, •±3%repeatability, •55-700baradjustmentrange.
V-161: To control oil flow to a secondary circuit. Flow is blocked until system pressure rises to the V-161 setting. When this pres sure level is reached, the V-161 opens
to allow flow to the se con dary cir-cuit. A pressure differen tial is always maintained between the primary and secondary circuit. Min.operatingpressure:140bar.
Valve Type and Model Number
Description
Control Manifolds
For two or four port manifolds with integral flow control valves, see the manifold page of the
System Components section.
Page:
Fittings
For additional fittings see the fitting page of the System Components section in this catalogue.
* See page 56 for more information about products for use in high temperature and extreme environment applications.
Page: