INGENIEMUS

INNOVATIVE OIL SAVING AND LUBRICANT CLEANING FILTER SYSTEMS FOR HYDRAULIC SYSTEMS

INGENIEMUS

FAILURE CAUSES

The failure of a hydraulic pump to provide sufficient pressure the internal leakage or blockage of hydraulic valves can almost always be attributed to high levels of contamination within the system. Although hydraulic systems are fitted as standard with a filter system to remove contamination, design constraints mean that most hydraulic filters are unable to filter to the required decontamination standard because they must be able to allow high flow rates.

In addition to this, full flow hydraulic filters running under full system pressure are often subjected to large pressure surges that can release large quantities of contamination that had been previously captured within the

HYDRAULIC OIL IS THE LIFEBLOOD OF YOUR SYSTEM

element

This newly released contamination is then free to damage hydraulic components within a short duration giving the system exposure to an intense burst of dirty oil.

Furthermore, the maintenance of hydraulic oil is often neglected. Regular maintenance of oil is a crucial factor for faultless operation. The components in a modern hydraulic unit glide on an oil film of less than 10 µm.

This fine oil film guarantees the smooth operation of the system, however it requires clean oil. In practice, fluids in hydraulic systems are often highly contaminated.

This is not always apparent as the

the visibility threshold for thehuman eye is approximately 40 µm.

Standard filters are not sufficient to protect your equipment from contaminated oils

INGENIEMUS

HOW IT WORKS

The filter is a 0.5 ultra-finefiltration system with a patented insert comprised of advanced fabrics.

Our micro-filter acts as a supplement to the main filter system. It works by continually taking only a small amount of oil from the lubrication system in order to clean the lubricant down to 0.5 microns.

Bypass filtration is the key to not only lowering your scheduled maintenance and lubrication costs, but also increasing the life of your equipment by reducing engine wear.

Micfil filters increase machinery lifetime by ensuring that your

THE SOLUTION - MICFIL 0.5 MICRON BYPASS OIL FILTER

lubricants meet the necessary manufacturer’s purity specifications.

The micfil ultrafine filter inserts, manufactured in Germany from high quality materials, also absorb water and so prevent formation of acid in the oil.

By installing Micfil bypass micro-filters on your equipment, you will extend the lifetime of your critical and expensive lubricants, prolonging the lifetime of your machinery, and lowering maintenance and repair costs.

Your machines will also be more environmentally friendly through reducing hydraulic oil consumption and hence a reduction in waste oil disposal.

ADVANTAGES

Cleaner than New Hydraulic Fluids

Increased Oil Life

Less Waste Fluid

Reduced Fluid Disposal Cost

Less Downtime

Longer Equipment Life

Reduced Maintenance Labor Costs

INGENIEMUS

PRICING AND SIZING

The Micfil ultrafine filter installed in the return oil flow has a filter performance of 0.5microns and provides a continuous cleaning process of hydraulic oils and absorption of water. The filter reduces wear on valves, cylinders and pistons and minimizes the risk of breakdowns, leaving you free to get on with the job!

Hydraulic oil (sump capacity) - Prices are Ex. VAT & Delivery

- 250 litres - 1 x AL 150 £483.00- 500 litres - 1 x AL 300 £585.00- 1000 litres - 2 x AL 300 £1032.00- 2000 litres - 3 x AL300 £1420.00- +2000 litres £POA

Replacement Filter Inserts - Prices are Ex. VAT & Delivery

- FE 150 (AL 150) £22.00- FE 300 (AL 300) £39.00- FE 600 (AL 600) £68.00