HYDRAULIC HOSE - ujprimatek.com · %5,'*(6721( &25325$7,21 .\REDVKL FKRPH &KXR NX 7RN\R -DSDQ ... impulse cycles conforming to JIS heavy duty application standard B8360

$Page 1: HYDRAULIC HOSE - ujprimatek.com · %5,'*(6721( &25325$7,21 .\REDVKL FKRPH &KXR NX 7RN\R -DSDQ ... impulse cycles conforming to JIS heavy duty application standard B8360$
●Designs and specifications of the machines, equipment and tools are subject to change without any advanced notice. No.2014.06.1000Ⓢ

HYDRAULIC HOSECouplings , Accessories and Equipment

HYDRAULIC PRODUCTSBRIDGESTONE CORPORATION

Maximum Working Pressure

1.5MPa500PSI

PA01I.D.

PA0104＊PA0106＊PA0108＊

Catalog Number

1/43/81/2

6.39.5

12.7

inch mmO.D.

0.550.690.83

14.017.421.2

inch mm

200 1.5

psi MPaMax.W.P.

870 6.0

psi MPaMin.B.P.

2.172.563.54

556590

inch mmMin.B.R.

0.330.530.62

150240280

lbs/ft g/mWeight Reinforcement

4C AS/27 AS/27UL/30

Factory-assembled UNICRIMP-crimpedCompatible coupling/relevant page

For Safety’s sake Be sure to read the following before use.

1

Proper usage1

Preventive maintenance3

Storage4

Warning Severe personal injury or death may result if these instructions are not followed.

Caution Personal injury or property damage may result if these instructions are not followed

●Do not touch a pressurized hydraulic hose assembly with any part of your body.If hoses, couplings or accessories are broken, and a fluid touches the skin, even if no pain is felt, a serious injury including burns may be caused. In case of JAT/JAM series, be sure to use safety chains. Use of plastic hose guards will help a person avoid injury.

●System working pressure should not exceed the rated working pressure of the hose assembly.Exceeding the rated working pressure of the hose may result in the hose bursting or hose coupling blow-off.Follow the maximum working pressure ratings listed in this catalog.

●Use compatible hydraulic fluidThe use of an incompatible hydraulic fluid will deteriorate the inner tube and the reinforcement resulting in the hose bursting or coupling hose coupling blow-off.

●Protect hose from abrasions.If the hose reinforcement is exposed, it is susceptible to rust and accelerated damage leading to serious failure like hose burst. If it is found, replace with a new one.

●Avoid applications where the hose is or will be twisted or pulled.Twisting or stretching a hydraulic hose under pressure may result in hose bursting or hose coupling blow-off.If it is found, replace with a new one, then install a live swivel joint.

●Do not snap the hose.Snapping and deforming will lead to hose burst, leakage, and hose coupling blow-off. If found, replace with a new one.

●Do not apply an electrical current to a hose assembly.Electrifying a hose may lead to a hose failure or an electric shock.

●Tighten hose assemblies to the recommended torque.If tightening is improper, there are possibilities of leakage, connection portion breakage, and separation. Be sure to apply the recommended torque by using a torque spanner. In case of over torque, replace with a new one. In case of under torque, retighten with the recommended torque ( page 82 ).

●Avoid the usage exceeding the minimum bending radiusThe usage exceeding the minimum bending radius may cause hose burst and leakage. Be sure to follow the specified minimum bending radius.

●Avoid excessive vibrationThe usage excessive vibration may cause leakage and hose coupling blow-off by fatigue.

●Avoid the usage exceeding applicable temperatureThe usage exceeding applicable temperature may cause leakage and hose coupling blow-off.

●Avoid vacuum pressure (except for suction hose)Excessive vacuum pressure may result in the inner tube damage which leads to hose failure.

●Avoid submerging hose assemblies in water or any other liquid.Hose assemblies submerged in water are exposed to external pressure which will reduce the service life of a hose and/or have bad effect on hose assembly performance.

●Remove all air from hydraulic hose assemblies.Air may cause damage to the inner tube which will lead to hose failure.

●Follow minimum hose exposed lengthFollow minimum hose exposed length. Improper length may reult in inferior performance to catalog specification.

●Never repair or rework a hose assembly.Old or used hose assemblies do not have the same physical characteristics as a new hose and cannot be used.Old hoses or damaged hoses should be replaced with new one, and should not be repaired or reworked.

●Do not use for food or drinking water, since the hose is intended for industrial use.

Before use, check for the following conditions. If any are found, replace with a new part.Physical damage, blister, exposed reinforcement, kinking, hose coupling blow-off, leakage etc.JIS B8360,8362,8364 recommend that hoses should be changed every 2 years.

Warranty period is impulse cycle number or each specified period, whichever comes earlier (Refer to pages 7 to 10).

Warranty period 2

- Cap the couplings or hose cut ends- Keep out of direct sunlight- Do not expose to corrosive gas, oil or chemicals- Store in dark and dry place at the temperature between -10℃℃and +40℃(14°F to 104°F)

Bridgestone Hydraulic hose, couplings, and accessories are developed for hydraulic components. Follow each product’s application and specification.Avoid hose burst, leakage, and other dangers by following important steps.

This catalog shows the product specifications in the format below so you can select the correct product for your needs and prevent the risk of danger.

Temperature Range : ambient Permissible temperatures of ambient environment for the hose

Temperature Range: fluidPermissible temperatures of fluid flowing through the hose

Compatible Fluid Fluid applicable to the hoseInner Tube

Inner part of the hose, which comes into direct contact with the fluidThe specifications show the materials for this part.

Outer CoverOuter part of the hose, which is i n t ended t o p ro t ec t i t s reinforcingThe specifications show the materials for this part.*The color of this cover is black unless otherwise specified.

[ExampleSpecifications of Hoses]

●Compatible Fluid / Mineral Hydraulic Oil●Temperature Range: fluid / −40°C to 100°C / −40°F to 212°F●Temperature Range: ambient / −40°C to 70°C / −40°F to 158°F●Inner Tube / Oil-resistant synthetic rubber●Outer Cover / Weather-resistant synthetic rubber

PressurePressure shown in psi/MPa units

I.D・O.DInner and outer diameters of the hose

Coupling SeriesSeries of couplings that are crimped either at a factory or with UNICRIMP. The number after “/” indicates the number of the page that describes the applicable series of couplings.*Crimping the couplings may be impossible depending on the type of UNICRIMP used.

Min.B.R.Minimum bending radius that can be achieved without performance degradation. This radius is specified on the inside surface of the bend area.

Min.B.P.Pressure that the hose should withstand without problems such as coupling detachment, hose burst ing, and f lu id leaking from the crimped part when the hose is subjected to water or oil pressure.

Max.W.P.Maximum usable working pressure

ReinforcementFibers or wires woven or spirally wrapped around an inner tube to maintain hose p e r f o r m a n c e . T h e spec i f icat ions show the structure of the reinforcing.

Catalog NumberWhen ordering a product, specify its catalog number.*For details, refer to page 5.

WeightApproximate Weight of Hose

HoseHoses are flexible tubes designed to carry fluid from one location to another or to convey pressure. Typically, they include rubber hoses (　　　　　　 , , etc.) and resin hoses (　　　　　　 ,etc.).

3

Symbols

1

●Compatible Fluid Mineral Oil●Inner Tube Oil Resistant Synthetic Rubber●Outer Cover Weather Resistant Synthetic Rubber●Temperature Range : fluid －40℃to +100℃ (－40°F to +212°F)●Temperature Range : ambient －40℃to +70℃ (－40°F to +158°F)

■JIS Standard・JIS K6349-3(high-pressure rubber hose)・JIS B8360(high-pressure rubber hose assembly)

SMALLER BENDING RADIUS2

LONGER HOSE LIFE1

BROAD RANGE3

SAE100R2

SAE100R1

■Hose Life Comparison400,000impulse cycles(JIS waveform)

200,000 impulse cycles(SAE waveform)


PASCALART series hose provides a longer service life and a greater fatigue resistance than conventional hose. PASCALART series hose guarantees a service life of 400,000 impulse cycles conforming to JIS heavy duty application standard B8360. Conventional hose assures a service life of only 100,000 to 200,000 impulse cycles.

PASCALART series hose is classified into 9 different working pressure categories. This broad range of working pressures, makes it easy to select the right hose for any given hydraulic circuit pressure.

1cycle50%

5%

15% 5%Test pressure ±5％

50%

1.0MPa

0MPa

PASCALART series hose minimum bending radius is 2/3 of the JIS K6349 standard, which results in shorter hydraulic hose assemblies, and more compact hydraulic circuits.

PASCALART

Conventional high-pressure rubber hose

hose

OKE SeriesFor Low Pressure

Compatible Fluid / Mineral Oil, WaterInner Tube / Oil Resistant Synthetic RubberOuter Cover / Weather Resistant Synthetic RubberTemperature Range: fluid /

Temperature Range : ambient /−40℃ to 70℃(−40℉ to 158℉)

●●●●

●

−40℃ to 100℃(Oil) / 0℃ to 50℃(Water) −40℉ to 212℉(Oil) / 32℉ to 122℉(Water)

6.69.7

13.016.219.325.7

0.500.630.780.931.091.44

12.715.919.823.527.736.5

200 1.5 600 4.5

2.562.953.944.925.917.87

6575

100125150200

130170240310430720

0.090.120.160.210.290.48

*These hoses cannot be used under surge (shock) pressure. If the hose will be subjected to surge (shock) pressure, replace it with a PASCALART hose (PA).*Hoses suitable for use at high temperatures (120°C and 150°C) are also available. For details, refer to the Lace-up Rubber Hose Catalog.We recommend using water-glycol with couplings on which the wetted parts only are nickel chrome plated (the catalog numbers of these couplings end with X103).

Warning Do not use high water base fluid (HWBF) with the hoses listed above. Doing so could cause the hoses to burst or fluid to leak. Severe personal injury or death may result if these instructions are not followed.



3.5MPa500PSI

PA03I.D.

PA0304＊PA0306＊PA0308＊PA0310PA0312PA0316PA0320PA0324

Catalog Number

1/43/81/25/83/4

11-1/41-1/2

6.39.5

12.715.919.025.431.838.1

inch mmO.D.

0.550.690.830.931.241.481.641.90

14.017.421.223.531.437.541.748.3

inch mm

500 3.5

psi MPaMax.W.P.

14.02,000

psi MPaMin.B.P.

2.172.563.544.335.316.697.879.84

556590

110135170200250

inch mmMin.B.R.

0.100.140.190.200.390.490.770.90

170220290310620800950

1,170


4C

2C

4C

1W

AS/27

UT/27

LC/27

AS/27UL/230

UL/30

UT/27LC/27


We recommend using water-glycol with couplings on which the wetted parts only are nickel chrome plated (the catalog numbers of these couplings end with X103).＊For factory-assembled hoses with stainless steel fittings, select the UL series hoses.

Warning

We recommend using water-glycol with couplings on which the wetted parts only are nickel chrome plated (the catalog numbers of these couplings end with X103). ＊Factory-assembled hoses with stainless steel fittings are the UL series hoses.Do not use high water base fluid (HWBF) with the hoses listed above. Do not use water-glycol with either PA0320 or PA0324. Failure to observe these instructions could cause the hoses to burst or fluid to leak. Severe personal injury or death may result if these instructions are not followed.

Warning

We recommend using water-glycol with couplings on which the wetted parts only are nickel chrome plated (the catalog numbers of these couplings end with X103). ＊Factory-assembled hoses with stainless steel fittings are the UL and UX series hoses. Do not use high water base fluid (HWBF) with the hoses listed above. Do not use water-glycol with either PA0720 or PA0724 or PA0732. Failure to observe these instructions could cause the hoses to burst or fluid to leak. Severe personal injury or death may result if these instructions are not followed.

Warning

We recommend using water-glycol with couplings on which the wetted parts only are nickel chrome plated (the catalog numbers of these couplings end with X103). ＊Factory-assembled hoses with stainless steel fittings are the UL and UX series hoses.Do not use high water base fluid (HWBF) with the hoses listed above. Do not use water-glycol with PA1020, PA1024, or PA1032. Failure to observe these instructions could cause the hoses to burst or fluid to leak. Severe personal injury or death may result if these instructions are not followed.


1.5MPa200PSI

PA01I.D.

PA0104＊PA0106＊PA0108＊

Catalog Number

1/43/81/2

6.39.5

12.7

inch mmO.D.

0.550.690.83

14.017.421.2

inch mm

200 1.5

psi MPaMax.W.P.

870 6.0

psi MPaMin.B.P.

2.172.563.54

556590

inch mmMin.B.R.

0.330.530.62

150240280


4C AS/27 AS/27UL/30


1.5MPa200PSI

OKEI.D.

OKE04OKE06OKE08OKE10OKE12OKE16

Catalog Number

1/43/81/25/83/4

1

inch mmO.D.

inch mm psi MPaMax.W.P.

psi MPaMin.B.P.

inch mmMin.B.R.


2C

4C

LS/27

UT/27

LS/27

UT/27




7.0MPa1,000PSI

PA07I.D.

PA0704＊PA0706＊PA0708＊PA0710＊PA0712＊PA0716＊PA0720PA0724PA0732

Catalog Number

1/43/81/25/83/4

11-1/41-1/2

2

6.39.5

12.715.919.025.431.838.150.8

inch mmO.D.

0.530.660.760.941.051.321.711.982.49

13.516.719.423.826.633.543.550.263.2

inch mm

1,000 7.0

psi MPaMax.W.P.

28.04,000

psi MPaMin.B.P.

2.172.953.154.335.126.898.66

10.6313.78

557580

110130175220270350

inch mmMin.B.R.

0.150.220.250.340.400.571.071.271.66

220330380510600850

1,6101,9102,490


1W

2W

UZ/34UB/34UZ/34

UB/34

UZ/34

HW/41

UZ/34

UB/34

UZ/34

HW/41



10.5MPa1,500PSI

PA10I.D.

PA1004＊PA1006＊PA1008＊PA1010＊PA1012＊PA1016＊PA1020 PA1024 PA1032

Catalog Number

1/43/81/25/83/4

11-1/41-1/2

2

6.39.5

12.715.919.025.431.838.150.8

inch mmO.D.

0.530.660.760.941.051.321.711.982.60

13.516.719.423.826.633.543.550.266.0

inch mm

1,500 10.5

psi MPaMax.W.P.

42.06,000

psi MPaMin.B.P.

2.172.953.154.335.126.898.66

10.6314.57

557580

110130175220270370

inch mmMin.B.R.

0.150.230.260.350.410.571.071.272.77

230340390530610860

1,6101,9104,150


1W

2W

4S

UZ/34UB/34UZ/34

UB/34

UZ/34

HW/41

UZ/34

UB/34

UZ/34

HW/41



14.0MPa2,000PSI

PA14I.D.


Catalog Number

1/43/81/25/83/4

11-1/41-1/2

2

6.39.5

12.715.919.025.431.838.150.8

inch mmO.D.

0.530.660.761.001.151.411.712.072.60

13.516.719.425.429.335.843.552.766.0

inch mm

2,000 14.0

psi MPaMax.W.P.

56.08,000

psi MPaMin.B.P.

2.172.953.544.725.517.099.45

11.0214.57

557590

120140180240280370

inch mmMin.B.R.

0.160.230.270.500.630.821.072.042.77

240350400750940

1,2301,6103,0604,150


1W

2W

4S

UZ/34UB/34UZ/34

UB/34

UZ/34

HW/41

UZ/34

UB/34

UZ/34

HW/41


Warning

We recommend using water-glycol with couplings on which the wetted parts only are nickel chrome plated (the catalog numbers of these couplings end with X103). ＊Factory-assembled hoses with stainless steel fittings are the UL and UX series hoses.Do not use high water base fluid (HWBF) with the hoses listed above. Do not use water-glycol with PA1420, PA1424, or PA1432, Failure to observe these instructions could cause the hoses to burst or fluid to leak. Severe personal injury or death may result if these instructions are not followed.

12

Reinforcing

2




LONGER HOSE LIFE1

BROAD RANGE3

SAE100R2

SAE100R1






1cycle50%

5%


50%

1.0MPa

0MPa


PASCALART


hose




●●●●

●


6.69.7

13.016.219.325.7

0.500.630.780.931.091.44

12.715.919.823.527.736.5

200 1.5 600 4.5

2.562.953.944.925.917.87

6575

100125150200

130170240310430720

0.090.120.160.210.290.48





3.5MPa500PSI

PA03I.D.


Catalog Number

1/43/81/25/83/4

11-1/41-1/2

6.39.5

12.715.919.025.431.838.1

inch mmO.D.

0.550.690.830.931.241.481.641.90

14.017.421.223.531.437.541.748.3

inch mm

500 3.5

psi MPaMax.W.P.

14.02,000

psi MPaMin.B.P.

2.172.563.544.335.316.697.879.84

556590

110135170200250

inch mmMin.B.R.

0.100.140.190.200.390.490.770.90

170220290310620800950

1,170


4C

2C

4C

1W

AS/27

UT/27

LC/27

AS/27UL/230

UL/30

UT/27LC/27



Warning


Warning


Warning



1.5MPa200PSI

PA01I.D.

PA0104＊PA0106＊PA0108＊

Catalog Number

1/43/81/2

6.39.5

12.7

inch mmO.D.

0.550.690.83

14.017.421.2

inch mm

200 1.5

psi MPaMax.W.P.

870 6.0

psi MPaMin.B.P.

2.172.563.54

556590

inch mmMin.B.R.

0.330.530.62

150240280


4C AS/27 AS/27UL/30


1.5MPa200PSI

OKEI.D.


Catalog Number

1/43/81/25/83/4

1

inch mmO.D.


psi MPaMin.B.P.

inch mmMin.B.R.


2C

4C

LS/27

UT/27

LS/27

UT/27




7.0MPa1,000PSI

PA07I.D.


Catalog Number

1/43/81/25/83/4

11-1/41-1/2

2

6.39.5

12.715.919.025.431.838.150.8

inch mmO.D.

0.530.660.760.941.051.321.711.982.49

13.516.719.423.826.633.543.550.263.2

inch mm

1,000 7.0

psi MPaMax.W.P.

28.04,000

psi MPaMin.B.P.

2.172.953.154.335.126.898.66

10.6313.78

557580

110130175220270350

inch mmMin.B.R.

0.150.220.250.340.400.571.071.271.66

220330380510600850

1,6101,9102,490


1W

2W

UZ/34UB/34UZ/34

UB/34

UZ/34

HW/41

UZ/34

UB/34

UZ/34

HW/41



10.5MPa1,500PSI

PA10I.D.


Catalog Number

1/43/81/25/83/4

11-1/41-1/2

2

6.39.5

12.715.919.025.431.838.150.8

inch mmO.D.

0.530.660.760.941.051.321.711.982.60

13.516.719.423.826.633.543.550.266.0

inch mm

1,500 10.5

psi MPaMax.W.P.

42.06,000

psi MPaMin.B.P.

2.172.953.154.335.126.898.66

10.6314.57

557580

110130175220270370

inch mmMin.B.R.

0.150.230.260.350.410.571.071.272.77

230340390530610860

1,6101,9104,150


1W

2W

4S

UZ/34UB/34UZ/34

UB/34

UZ/34

HW/41

UZ/34

UB/34

UZ/34

HW/41



14.0MPa2,000PSI

PA14I.D.


Catalog Number

1/43/81/25/83/4

11-1/41-1/2

2

6.39.5

12.715.919.025.431.838.150.8

inch mmO.D.

0.530.660.761.001.151.411.712.072.60

13.516.719.425.429.335.843.552.766.0

inch mm

2,000 14.0

psi MPaMax.W.P.

56.08,000

psi MPaMin.B.P.

2.172.953.544.725.517.099.45

11.0214.57

557590

120140180240280370

inch mmMin.B.R.

0.160.230.270.500.630.821.072.042.77

240350400750940

1,2301,6103,0604,150


1W

2W

4S

UZ/34UB/34UZ/34

UB/34

UZ/34

HW/41

UZ/34

UB/34

UZ/34

HW/41


Warning


13

PA series




LONGER HOSE LIFE1

BROAD RANGE3

SAE100R2

SAE100R1






1cycle50%

5%


50%

1.0MPa

0MPa


PASCALART


hose




●●●●

●


6.69.7

13.016.219.325.7

0.500.630.780.931.091.44

12.715.919.823.527.736.5

200 1.5 600 4.5

2.562.953.944.925.917.87

6575

100125150200

130170240310430720

0.090.120.160.210.290.48





3.5MPa500PSI

PA03I.D.


Catalog Number

1/43/81/25/83/4

11-1/41-1/2

6.39.5

12.715.919.025.431.838.1

inch mmO.D.

0.550.690.830.931.241.481.641.90

14.017.421.223.531.437.541.748.3

inch mm

500 3.5

psi MPaMax.W.P.

14.02,000

psi MPaMin.B.P.

2.172.563.544.335.316.697.879.84

556590

110135170200250

inch mmMin.B.R.

0.100.140.190.200.390.490.770.90

170220290310620800950

1,170


4C

2C

4C

1W

AS/27

UT/27

LC/27

AS/27UL/230

UL/30

UT/27LC/27



Warning


Warning


Warning



1.5MPa200PSI

PA01I.D.

PA0104＊PA0106＊PA0108＊

Catalog Number

1/43/81/2

6.39.5

12.7

inch mmO.D.

0.550.690.83

14.017.421.2

inch mm

200 1.5

psi MPaMax.W.P.

870 6.0

psi MPaMin.B.P.

2.172.563.54

556590

inch mmMin.B.R.

0.330.530.62

150240280


4C AS/27 AS/27UL/30


1.5MPa200PSI

OKEI.D.


Catalog Number

1/43/81/25/83/4

1

inch mmO.D.


psi MPaMin.B.P.

inch mmMin.B.R.


2C

4C

LS/27

UT/27

LS/27

UT/27




7.0MPa1,000PSI

PA07I.D.


Catalog Number

1/43/81/25/83/4

11-1/41-1/2

2

6.39.5

12.715.919.025.431.838.150.8

inch mmO.D.

0.530.660.760.941.051.321.711.982.49

13.516.719.423.826.633.543.550.263.2

inch mm

1,000 7.0

psi MPaMax.W.P.

28.04,000

psi MPaMin.B.P.

2.172.953.154.335.126.898.66

10.6313.78

557580

110130175220270350

inch mmMin.B.R.

0.150.220.250.340.400.571.071.271.66

220330380510600850

1,6101,9102,490


1W

2W

UZ/34UB/34UZ/34

UB/34

UZ/34

HW/41

UZ/34

UB/34

UZ/34

HW/41



10.5MPa1,500PSI

PA10I.D.


Catalog Number

1/43/81/25/83/4

11-1/41-1/2

2

6.39.5

12.715.919.025.431.838.150.8

inch mmO.D.

0.530.660.760.941.051.321.711.982.60

13.516.719.423.826.633.543.550.266.0

inch mm

1,500 10.5

psi MPaMax.W.P.

42.06,000

psi MPaMin.B.P.

2.172.953.154.335.126.898.66

10.6314.57

557580

110130175220270370

inch mmMin.B.R.

0.150.230.260.350.410.571.071.272.77

230340390530610860

1,6101,9104,150


1W

2W

4S

UZ/34UB/34UZ/34

UB/34

UZ/34

HW/41

UZ/34

UB/34

UZ/34

HW/41



14.0MPa2,000PSI

PA14I.D.


Catalog Number

1/43/81/25/83/4

11-1/41-1/2

2

6.39.5

12.715.919.025.431.838.150.8

inch mmO.D.

0.530.660.761.001.151.411.712.072.60

13.516.719.425.429.335.843.552.766.0

inch mm

2,000 14.0

psi MPaMax.W.P.

56.08,000

psi MPaMin.B.P.

2.172.953.544.725.517.099.45

11.0214.57

557590

120140180240280370

inch mmMin.B.R.

0.160.230.270.500.630.821.072.042.77

240350400750940

1,2301,6103,0604,150


1W

2W

4S

UZ/34UB/34UZ/34

UB/34

UZ/34

HW/41

UZ/34

UB/34

UZ/34

HW/41


Warning


13

PA series

3

Compatible Fluid / Mineral OilInner Tube / Synthetic RubberOuter Cover / Synthetic RubberTemperature Range : fluid /

Temperature Range : ambient / Based on

Smaller bending radiusMore flexible

−40℃ to + 100℃−40℉ to + 212℉

−40℃ to +70℃−40 ℉ to +158℉


17.0MPa2,500PSI

PA17I.D.

PA1704＊PA1706＊PA1708PA1710PA1712PA1716

Catalog Number

1/43/81/25/83/4

1

6.39.5

12.715.919.025.4

inch mmO.D.

0.530.660.761.001.151.41

13.516.719.425.429.335.8

inch mm

2,500 17.0

psi MPaMax.W.P.

68.010,000

psi MPaMin.B.P.

2.363.153.544.725.517.28

608090

120140185

inch mmMin.B.R.

0.160.240.280.510.630.87

240360420770950

1,300


1W

2W

UZ/34UB/34UZ/34

UB/34

UZ/34

UB/34

＊For factory-assembled hoses with stainless steel fittings, select the UL series hoses.


7.0MPa1,000PSI

PF07I.D.

PF0704＊PF0706＊PF0708＊

Catalog Number

1/43/81/2

6.39.5

12.7

inch mmO.D.

0.470.610.73

11.915.518.5

inch mm

1,000 7.0

psi MPaMax.W.P.

28.04,000

psi MPaMin.B.P.

1.571.972.56

405065

inch mmMin.B.R.

0.090.150.21

140220320


1WUZ/34UB/34UZ/34

UL/30・UZ/34

UB/34




14.0MPa2,000PSI

PF14I.D.

PF1404＊PF1406＊PF1408＊

Catalog Number

1/43/81/2

6.39.5

12.7

inch mmO.D.

0.470.610.75

11.915.519.0

inch mm

2,000 14.0

psi MPaMax.W.P.

56.08,000

psi MPaMin.B.P.

1.571.972.36

405060

inch mmMin.B.R.

0.100.150.23

150230350


1WUZ/34UB/34UZ/34

UL/30・UZ/34

UB/34




17.0MPa2,500PSI

PF17I.D.

PF1704＊PF1706＊PF1708＊

Catalog Number

1/43/81/2

6.39.5

12.7

inch mmO.D.

0.500.660.80

12.616.720.2

inch mm

2,500 17.0

psi MPaMax.W.P.

68.010,000

psi MPaMin.B.P.

1.772.363.15

456080

inch mmMin.B.R.

0.130.220.33

190330500


1W

2W

UZ/34UB/34UZ/34

UZ/34

UB/34




24.5MPa3,500PSI

PFWI.D.

PFW04PFW06PFW08

Catalog Number

1/43/81/2

6.39.5

12.7

inch mmO.D.

0.530.680.80

13.417.220.2

inch mm

3,500 24.5

psi MPaMax.W.P.

98.014,000

psi MPaMin.B.P.

1.972.763.54

507090

inch mmMin.B.R.

0.190.290.36

290430540


2WUZ/34UB/34UZ/34

ー



27.5MPa4,000PSI

PFHI.D.

PFH04PFH06PFH08

Catalog Number

1/43/81/2

6.39.5

12.7

inch mmO.D.

0.530.680.80

13.417.220.2

inch mm

4,000 27.5

psi MPaMax.W.P.

110.016,000

psi MPaMin.B.P.

1.972.763.54

507090

inch mmMin.B.R.

0.200.300.37

300450550


2WUZ/34UB/34UZ/34

UZ/34

UB/34




20.5MPa3,000PSI

PA21I.D.

PA2104PA2106PA2108PA2110PA2112PA2116PA2120PA2124PA2132

Catalog Number

1/43/81/25/83/4

11-1/41-1/2

2

6.39.5

12.715.919.025.431.838.150.8

inch mmO.D.

0.530.710.871.001.151.411.782.072.60

13.518.022.225.429.335.845.252.766.0

inch mm

3,000 20.5

psi MPaMax.W.P.

82.012,000

psi MPaMin.B.P.

2.763.544.335.516.698.27

10.2412.2016.93

7090

110140170210260310430

inch mmMin.B.R.

0.170.310.430.510.640.871.572.042.77

250470650770960

1,3002,3603,0604,150


1W

2W

4S

UZ/34UB/34UZ/34

UB/34

UZ/34

HW/40

UZ/34

UB/34

UZ/34

HW/40



20.5MPa3,000PSI

PF21I.D.

PF2104＊PF2106PF2108PF2110PF2112PF2116

Catalog Number

1/43/81/25/83/4

1

6.39.5

12.715.919.025.4

inch mmO.D.

0.500.680.800.981.131.41

12.617.220.224.928.735.8

inch mm

3,000 20.5

psi MPaMax.W.P.

82.012,000

psi MPaMin.B.P.

1.972.563.353.944.727.09

506585

100120190

inch mmMin.B.R.

0.130.280.350.470.610.83

200420530710910

1,250


1W

2W

UZ/34UB/34UZ/34

UB/34

UZ/34

UB/34



27.5MPa4,000PSI

PA28I.D.


Catalog Number

1/43/81/25/83/4

11-1/41-1/2

2

6.39.5

12.715.919.025.431.838.150.8

inch mmO.D.

0.590.750.871.041.141.411.802.202.95

15.119.122.226.429.035.945.655.975.0

inch mm

4,000 27.5

psi MPaMax.W.P.

110.016,000

psi MPaMin.B.P.

2.763.944.335.516.698.66

11.0212.6016.93

70100110140170220280320430

inch mmMin.B.R.

0.250.360.520.670.751.171.742.935.27

380540780

1,0001,1301,7502,6104,3907,900


2W

4S

6S

UZ/34

UB/34

UZ/34KN/41KD/41

UZ/34

UB/34

UZ/34ーー



34.5MPa5,000PSI

PA35I.D.


Catalog Number

1/43/81/25/83/4

11-1/41-1/2

2

6.39.5

12.715.919.025.431.838.150.8

inch mmO.D.

0.590.750.871.041.141.441.932.202.95

15.119.122.226.429.036.649.055.975.0

inch mm

5,000 34.5

psi MPaMax.W.P.

138.020,000

psi MPaMin.B.P.

3.154.335.916.698.66

11.0212.9914.9619.69

80110150170220280330380500

inch mmMin.B.R.

0.260.370.530.670.751.332.572.965.33

390550800

1,0001,1302,0003,8504,4408,000


2W

4S

6S

UZ/34

UB/34

KN/41KD/41

UZ/34

UB/34

UZ/34ーー



●●●●

●

14

PA series

Reinforcing

4

LONGER HOSE LIFE2

CONTINUOUS SERVICE AT 120 (248 )1


EASY INSTALLATION4

BROAD RANGE5

EPOQU series hose can be used continuously with a hydraulic circuit oil temperature of 120℃(248°F). Conventional hose is only rated for 100℃(212°F)

EPOQU successfully passes 1,000,000 impulse cycles at 120 (250 ).

EPOQU series hose minimum bending radius is 2/3 of the conventional standard, which results in shorter hydraulic hose assembly lengths, and more compact hydraulic circuits.

EPOQU is flexible. EPOQU requires just 2/3 of the force necessary to bend the conventional rubber hose to the same bending radius. Thus, EPOQU allows easy and speedy installation.

EPOQU series is classified into 5 categories of different working pressure so that you can select a right hose according to the pressure rating of the pump to be applied.

JIS Standarts

SAE Standard

120℃

100℃

1cycle50%

5%


50%

1.0MPa0MPa

SAE100R15

SAE 100R2

JIS K 6349-3

1,000,000 cycles

400,000 cycles

500,000 cycles

200,000 cycles

Conventional hose

F

FConventionalhighpressure hose

F:Force(kg) to bend a hoseF

●Compatible Fluid　Mineral Oil

●Inner Tube　Oil Resistant Synthetic Rubber

●Outer Cover　Weather Resistant Synthetic Rubber

●Temperature Range : fluid 　－40℃ to +120℃（－40℉ to +248℉）

●Temperature Range : ambient　－40℃ to +70℃（－40℉ to +158℉）

HQ35 SeriesImpulse cycle 1,200,000

●●●●●

Compatible Fluid / Mineral OilInner Tube / Synthetic RubberOuter Cover / Synthetic RubberTemperature Range : fluid / -40℃ to 100℃(-40℉ to 212℉)Temperature Range : ambient / -40℃ to 70℃(-40 ℉ to 158℉)


34.5MPa5,000PSI

HQ35I.D.

HQ3508HQ3510HQ3512HQ3516HQ3520

Catalog Number

1/25/83/4

11-1/4

inch mmO.D.

0.871.041.141.441.92

inch mm

5,000

psi MPaMax.W.P.

psi MPaMin.B.P.

4.726.307.879.45

12.99

inch mmMin.B.R.

0.500.660.721.302.49

12.715.919.025.431.8

22.226.429.036.648.7

34.5 138.020,000

120160200240330

750990

1,0801,9503,730


4S

6S

UB/34

UB/34

UB/34

UB/34UZ/34



27.5MPa4,000PSI

SQ28I.D.

SQ2808SQ2810SQ2812

Catalog Number

1/25/83/4

inch mmO.D.

0.891.051.15

inch mm

4,000

psi MPaMax.W.P.

psi MPaMin.B.P.

4.725.917.09

inch mmMin.B.R.

0.520.680.74

12.715.919.0

22.526.729.3

27.5 110.016,000120150180

77010101100


4S UB/34 ー



36.0~38.0MPa5,200~5,500PSI

CQ36/38I.D.

CQ3604CQ3606CQ3608CQ3610CQ3812CQ3816CQ3820

Catalog Number

1/43/81/25/83/4

11-1/4

inch mmO.D.

0.590.760.871.041.191.441.87

inch mm

5,200

psi MPaMax.W.P.

psi MPaMin.B.P.

3.154.335.515.918.27

10.2412.99

inch mmMin.B.R.

0.260.380.500.670.941.312.42

6.39.5

12.715.919.025.431.8

15.119.222.226.430.136.647.4

80110140150210260330

380570750

1000140019503600


2W

4S

6S

UZ/34

UB/34

UB(CX)/34

UB/34

UZ/34

UB/34

ー


CQ Series Impulse cycle 1,000,000 MSHA Approved

●●●●

●

Compatible Fluid / Mineral OilInner Tube / Oil Resistant Synthetic RubberOuter Cover / Weather Resistant Synthetic RubberTemperature Range : fluid /-40℃ to +100℃(-40℉ to +212℉)(CQ36) fluid -40℃ to +120℃(-40℉ to +248℉)(CQ38)Temperature Range : ambient / -40℃ to 70℃(-40 ℉ to 158℉)

5,500

36.0

38.0

144.0

152.0

20,800

22,000

SQ28 SeriesUltra High Abrasion resistant hose

●●●

●●

Compatible Fluid / Mineral OilInner Tube / Oil Resistant Synthetic RubberOuter Cover / Weather Resistant Synthetic Rubber with Ultra High Molecular Weight PolyethyleneTemperature Range : fluid / -40℃ to +100℃(-40℉ to +212℉)Temperature Range : ambient / -40℃ to +70℃(-40℉ to +158℉)

12.715.919.025.431.838.1

22.226.229.335.245.652.7

90110140160210280

630860990

1,4302,5603,070


17.0MPa2,500PSI

EQ17I.D.

EQ1708EQ1710 EQ1712EQ1716EQ1720 EQ1724

Catalog Number

1/25/83/4

11-1/41-1/2

inch mmO.D.

0.871.031.151.391.802.07

inch mm

2,500

psi MPaMax.W.P.

psi MPaMin.B.P.

3.544.335.516.308.27

11.02

inch mmMin.B.R.

0.420.570.660.951.712.05

17.0 85.012,500


2W

4S

UZ/34

UB/34

UZ/34HW/40

UB/34

UZ/34HW/41


16

Reinforcing

5

LONGER HOSE LIFE2

CONTINUOUS SERVICE AT 120 (248 )1


EASY INSTALLATION4

BROAD RANGE5

EPOQU series hose can be used continuously with a hydraulic circuit oil temperature of 120℃(248°F). Conventional hose is only rated for 100℃(212°F)

EPOQU successfully passes 1,000,000 impulse cycles at 120 (250 ).

EPOQU series hose minimum bending radius is 2/3 of the conventional standard, which results in shorter hydraulic hose assembly lengths, and more compact hydraulic circuits.

EPOQU is flexible. EPOQU requires just 2/3 of the force necessary to bend the conventional rubber hose to the same bending radius. Thus, EPOQU allows easy and speedy installation.

EPOQU series is classified into 5 categories of different working pressure so that you can select a right hose according to the pressure rating of the pump to be applied.

JIS Standarts

SAE Standard

120℃

100℃

1cycle50%

5%


50%

1.0MPa0MPa

SAE100R15

SAE 100R2

JIS K 6349-3

1,000,000 cycles

400,000 cycles

500,000 cycles

200,000 cycles

Conventional hose

F

FConventionalhighpressure hose

F:Force(kg) to bend a hoseF

●Compatible Fluid　Mineral Oil

●Inner Tube　Oil Resistant Synthetic Rubber

●Outer Cover　Weather Resistant Synthetic Rubber

●Temperature Range : fluid 　－40℃ to +120℃（－40℉ to +248℉）

●Temperature Range : ambient　－40℃ to +70℃（－40℉ to +158℉）

HQ35 SeriesImpulse cycle 1,200,000

●●●●●

Compatible Fluid / Mineral OilInner Tube / Synthetic RubberOuter Cover / Synthetic RubberTemperature Range : fluid / -40℃ to 100℃(-40℉ to 212℉)Temperature Range : ambient / -40℃ to 70℃(-40 ℉ to 158℉)


34.5MPa5,000PSI

HQ35I.D.

HQ3508HQ3510HQ3512HQ3516HQ3520

Catalog Number

1/25/83/4

11-1/4

inch mmO.D.

0.871.041.141.441.92

inch mm

5,000

psi MPaMax.W.P.

psi MPaMin.B.P.

4.726.307.879.45

12.99

inch mmMin.B.R.

0.500.660.721.302.49

12.715.919.025.431.8

22.226.429.036.648.7

34.5 138.020,000

120160200240330

750990

1,0801,9503,730


4S

6S

UB/34

UB/34

UB/34

UB/34UZ/34



27.5MPa4,000PSI

SQ28I.D.

SQ2808SQ2810SQ2812

Catalog Number

1/25/83/4

inch mmO.D.

0.891.051.15

inch mm

4,000

psi MPaMax.W.P.

psi MPaMin.B.P.

4.725.917.09

inch mmMin.B.R.

0.520.680.74

12.715.919.0

22.526.729.3

27.5 110.016,000120150180

77010101100


4S UB/34 ー



36.0~38.0MPa5,200~5,500PSI

CQ36/38I.D.

CQ3604CQ3606CQ3608CQ3610CQ3812CQ3816CQ3820

Catalog Number

1/43/81/25/83/4

11-1/4

inch mmO.D.

0.590.760.871.041.191.441.87

inch mm

5,200

psi MPaMax.W.P.

psi MPaMin.B.P.

3.154.335.515.918.27

10.2412.99

inch mmMin.B.R.

0.260.380.500.670.941.312.42

6.39.5

12.715.919.025.431.8

15.119.222.226.430.136.647.4

80110140150210260330

380570750

1000140019503600


2W

4S

6S

UZ/34

UB/34

UB(CX)/34

UB/34

UZ/34

UB/34

ー


CQ Series Impulse cycle 1,000,000 MSHA Approved

●●●●

●

Compatible Fluid / Mineral OilInner Tube / Oil Resistant Synthetic RubberOuter Cover / Weather Resistant Synthetic RubberTemperature Range : fluid /-40℃ to +100℃(-40℉ to +212℉)(CQ36) fluid -40℃ to +120℃(-40℉ to +248℉)(CQ38)Temperature Range : ambient / -40℃ to 70℃(-40 ℉ to 158℉)

5,500

36.0

38.0

144.0

152.0

20,800

22,000

SQ28 SeriesUltra High Abrasion resistant hose

●●●

●●

Compatible Fluid / Mineral OilInner Tube / Oil Resistant Synthetic RubberOuter Cover / Weather Resistant Synthetic Rubber with Ultra High Molecular Weight PolyethyleneTemperature Range : fluid / -40℃ to +100℃(-40℉ to +212℉)Temperature Range : ambient / -40℃ to +70℃(-40℉ to +158℉)

12.715.919.025.431.838.1

22.226.229.335.245.652.7

90110140160210280

630860990

1,4302,5603,070


17.0MPa2,500PSI

EQ17I.D.

EQ1708EQ1710 EQ1712EQ1716EQ1720 EQ1724

Catalog Number

1/25/83/4

11-1/41-1/2

inch mmO.D.

0.871.031.151.391.802.07

inch mm

2,500

psi MPaMax.W.P.

psi MPaMin.B.P.

3.544.335.516.308.27

11.02

inch mmMin.B.R.

0.420.570.660.951.712.05

17.0 85.012,500


2W

4S

UZ/34

UB/34

UZ/34HW/40

UB/34

UZ/34HW/41


176

SAE Series

DIN Series●Compatible Fluid / Mineral Oil

●Compatible Fluid / Mineral Oil●Only Hose Available

TemperatureRange Fluid Ambient

R1,R2,4SP,4SH

R12,R13,R15

-40 to +100 -40 to +70-40 to +212 -40 to +158

-40 to +121 -40 to +70-40 to +250 -40 to +158


20.5MPa3,000PSI

EQ21I.D.

EQ2108EQ2110 EQ2112EQ2116EQ2120EQ2124EQ2132

Catalog Number inch mmO.D.


psi MPaMin.B.P.

inch mmMin.B.R.


2W

4S

6S

UZ/34

UB/34

UZ/34HW/40KN/41

UB/34

UZ/34HW/40－



24.5MPa3,500PSI

EQ25I.D.

EQ2508EQ2510EQ2512EQ2516EQ2520EQ2524

Catalog Number

1/25/83/4

11-1/41-1/2

inch mmO.D.

0.871.041.141.411.802.20

inch mm

3,500

psi MPaMax.W.P.

psi MPaMin.B.P.

3.945.126.307.09

10.2412.60

inch mmMin.B.R.

0.520.670.751.171.712.89

24.5 122.517,500


4S

6S

UB/34

UZ/34KN/41

UB/34

UZ/34－



27.5MPa4,000PSI

EQ28I.D.

EQ2808EQ2810EQ2812EQ2816EQ2820EQ2824

Catalog Number

1/25/83/4

11-1/41-1/2

inch mmO.D.

0.871.041.141.411.912.20

inch mm

4,000

psi MPaMax.W.P.

psi MPaMin.B.P.

3.945.126.307.87

11.8114.17

inch mmMin.B.R.

0.520.670.751.172.432.89

27.5 137.520,000


4S

6S

UB/34

KN/41

UB/34

UZ/34－



31.0MPa4,500PSI

EQ31I.D.

EQ3108EQ3110EQ3112EQ3116EQ3120EQ3124EQ3132

Catalog Number

1/25/83/4

11-1/41-1/2

2

inch mmO.D.

0.871.041.141.441.932.202.95

inch mm

4,500

psi MPaMax.W.P.

psi MPaMin.B.P.

4.726.307.879.45

12.6015.3522.05

inch mmMin.B.R.

0.530.670.751.332.533.005.27

31.0 155.022,500


4S

6S

UB/34

KN/41EX/41

UB/34

UZ/34

－


12.715.919.025.431.838.150.8

22.226.229.035.245.652.770.0

100130140180230310430

630860

1,1301,4302,5603,0705,800

12.715.919.025.431.838.1

22.226.429.035.945.655.9

100130160180260320

7801,0001,1301,7502,5604,340

12.7 15.9 19.0 25.4 31.8 38.1

22.226.429.035.948.655.9

100130160200300360

7801,0001,1301,7503,6404,340

12.715.919.025.431.838.150.8

22.226.429.036.649.055.975.0

120160200240320390560

8001,0001,1302,0003,8004,5007,900

1/25/83/4

11-1/41-1/2

2

0.871.031.141.391.802.072.76

3,000

3.945.125.517.099.06

12.2016.93

0.420.570.750.951.712.053.87

20.5 102.515,000

I.D. O.Dmm mm mminch g/mlbs/ft

Max.W.P. Min.B.P. Min.B.R. WeightMPa MPainch inch psi psi

Catalog Number Reinforcement

R1AT

R1AT04R1AT06R1AT08R1AT10R1AT12R1AT16R1AT20R1AT24R1AT32

1/43/81/25/83/4

11-1/41-1/2

2

6.39.5

12.715.919.025.431.838.150.8

0.530.690.810.941.091.411.701.982.53

13.517.520.623.827.835.843.250.464.3

326026102320188015201260

890720580

22.518.016.013.010.58.76.25.04.0

13040104409280752060805040356028802320

90.072.064.052.042.034.825.520.016.0

3.94 4.92 7.09 8.07 9.45

11.81 16.54 19.69 24.80

100125180205240300420500630

220340420510630960

1,2101,5401,940

0.15 0.23 0.28 0.34 0.42 0.65 0.81 1.03 1.30

1W

SAE 100R1




R2AT

R2AT04R2AT06R2AT08R2AT10R2AT12R2AT16R2AT20R2AT24R2AT32

1/43/81/25/83/4

11-1/41-1/2

2

6.39.5

12.715.919.025.431.838.150.8

0.590.750.871.001.161.501.892.142.64

15.119.122.225.429.438.148.054.467.0

580047803980362031102390181013001160

40.033.027.525.021.516.512.59.08.0

23200191201592014480124409560724052004640

160.0132.0110.0100.086.066.050.036.032.0

3.94 4.92 7.09 8.07 9.45

11.81 16.54 19.69 24.80

100125180205240300420500630

380540630770920

1,4301,9702,2402,660

0.26 0.36 0.42 0.52 0.62 0.96 1.32 1.51 1.79

2W

SAE 100R2

18

Epoqu series

Reinforcing

7

6.39.5

12.7

18.624.627.8

137.0

98.0

275.0219.5192.0

40,00032,00028,000

90120170

8501,1501,360

6.39.5

12.7

16.720.822.2

68.5196.0154.0138.0

28,500 22,500 20,000

90140170

450750830

14.0 35.02,000 5,000

3.0 12.01,600

25.431.838.150.8

35.641.748.363.4

140180230270

9401,1501,3502,300

VW SeriesFor Suction Line

Compatible Fluid / Mineral OilInner Tube / Oil Resistant Synthetic RubberOuter Cover / Weather Resistant Synthetic RubberTemperature Range: fluid / -40℃ to 100℃(-40℃ to 212°F)Temperature Range : ambient / -40℃ to 70℃(-40℃ to 158°F)Maximum Allowable Suction : -0.08665 Mpa

●●●●●●

Rubber Hoses for Water Cleaning

JW SeriesFor Hydraulic Jack

●●●●●

Compatible Fluid / Mineral OilInner Tube / Oil Resistant Synthetic RubberOuter Cover / Weather Resistant Synthetic RubberTemperature Range: fluid / -40℃ to 100℃(-40°F to 212°F)Temperature Range : ambient / -40℃ to 70℃(-40°F to 158°F)

●●●●●

Compatible Fluid / WaterInner Tube / Water-resistant synthetic rubberOuter Cover / Abrasion-resistant, weather-resistant synthetic rubberTemperature Range: fluid / 0°C to 80°C (32°F to 176°F)Temperature Range : ambient / 0°C to 70°C (32°F to 158°F)

6.39.5

12.7

13.416.520.2

507080

140200250

20.5 51.53,000 8,0006.39.5

12.7

13.416.519.8

505070

140200250

1.971.972.76

0.310.440.55

11 Lightweight and flexible designThe lightweight and flexible designof the hoses makes them easy to install.

Note: The types of coupling threads for the JW70 series are designated “R” and “Q.” Use a pressure waveform (jack waveform) that can withstand shock pressure.

■Hoses for jacks also include PrimoLine hoses. (Refer to pages 59 to 63.)Note: The types of coupling threads for the JWK series hoses are designated “R” and “Q.” Use a pressure waveform (jack waveform) that can withstand shock pressure.

Check the delivery dates of products marked ▲.

(The WA14 series is about 40% lighter and more flexible than the WJ series by Bridgestone.)

2 Enhanced safetyThe hoses offer enhanced safety by absorbing the shock when thefluid supply goes on or off.

Caution The reinforcing for the WA14 and WA R series is made from special synthetic fibers. Do not install these hoses in an environment where they are likely to come into contact with sharp objects (as their reinforcing may be cut, causing the hose to burst.) You are recommended to install WJ or WB21 series hoses in the environment above.

1/43/81/2

0.660.820.87

9,9003.545.516.69

0.300.430.55

1/43/81/2

0.730.971.09

19,900

14,200

3.544.726.69

0.300.430.55




R15A

R15A06R15A08R15A12R15A16R15A20R15A24

3/81/23/4

11-1/41-1/2

9.512.719.025.431.838.1

0.800.941.211.521.962.26

20.323.830.738.749.857.3

6,0006,0006,0006,0006,0006,000

42.042.042.042.042.042.0

24,00024,00024,00024,00024,00024,000

168.0168.0168.0168.0168.0168.0

5.917.87

10.4312.9917.5220.87

150200265330445530

720920

1,4702,1803,8904,760

0.480.610.981.452.593.17

4S

6S

SAE 100R15Construction●Inner Tube /　Synthetic Rubber●Outer Cover /　Synthetic Rubber●Reinforcement /

4S(R15A06/RA15A08/ R15A12/R15A16)6S(R15A20/R15A24)




R13A

R13A12R13A16R13A20R13A24R13A32

19.025.431.838.150.8

3/41

1-1/41-1/2

2

1.261.521.962.262.80

32.138.749.857.371.1

5,0005,0005,0005,0005,000

35.035.035.035.035.0

20,00020,00020,00020,00020,000

137.9137.9137.9137.9137.9

9.4511.8116.5419.6925.20

240300420500640

1,6002,2504,4004,8007,200

1.071.502.933.204.80

SAE 100R13

6S

4S

Construction●Inner Tube /　Synthetic Rubber●Outer Cover /　Synthetic Rubber●Reinforcement /

4S(R13A12/R13A16)6S(R13A20/R13A24/R13A32)




4SP

4SP064SP084SP104SP124SP164SP204SP24

3/81/25/83/4

11-1/41-1/2

9.512.715.919.025.431.838.1

0.840.971.111.271.562.002.25

21.424.628.232.239.750.857.2

6,5006,0005,1005,1004,1003,0002,700

44.541.535.035.028.021.018.5

26,00024,00020,40020,40016,40012,00010,800

178.0166.0140.0140.0112.084.074.0

7.099.069.84

11.8113.3918.1122.05

180230250300340460560

820950

1,2001,6002,3003,2003,800

0.550.630.801.071.532.132.53

4S

DIN 4SPConstruction●Inner Tube /　Synthetic Rubber●Outer Cover /　Synthetic Rubber●Reinforcement / 4S




4SH

4SH124SH164SH204SH244SH32

3/41

1-1/41-1/2

2

19.025.431.838.150.8

1.271.521.792.112.68

32.238.745.553.568.1

6,1005,5004,7004,2003,600

42.038.032.529.025.0

24,40022,00018,80016,80014,400

168.0152.0130.0116.0100.0

11.0213.3918.1122.0527.56

280340460560700

1,6002,2502,6003,2004,800

1.071.501.732.133.20

4S

DIN 4SHConstruction●Inner Tube /　Synthetic Rubber●Outer Cover /　Synthetic Rubber●Reinforcement / 4S




R12A

R12A06R12A08R12A10R12A12R12A16R12A20R12A24R12A32

3/81/25/83/4

11-1/41-1/2

2

9.512.715.919.025.431.838.150.8

0.800.941.081.211.501.852.112.63

20.323.827.430.738.047.053.566.7

4,0004,0004,0004,0004,0003,0002,5002,500

28.028.028.028.028.021.017.517.5

16,00016,00016,00016,00016,00012,00010,00010,000

112.0112.0112.0112.0112.084.070.070.0

4.927.097.879.45

11.8116.5419.6925.20

125180200240300420500640

750800

1,1001,2501,9502,8003,3304,400

0.500.530.730.831.301.872.222.93

4S

ConstructionSAE 100R12

●Inner Tube /　Synthetic Rubber●Outer Cover /　Synthetic Rubber●Reinforcement / 4S Maximum Working Pressure

68.5MPa9,900PSI

JW70I.D.

JW7004JW7006JW7008



psi MPaMin.B.P.

inch mmMin.B.R.


2W

4S

ZP/45KH/40UB/34

ZP/45－

UB/34



14.0MPa2,000PSI

WA14I.D.

WA1404WA1406WA1408

Catalog Number

1/43/81/2

inch mmO.D.

0.530.650.80


psi MPaMin.B.P.

1.972.763.15

inch mmMin.B.R.

0.310.440.55


1B UL/30 UL/30



20.5MPa3,000PSI

WARI.D.

WAR04 WAR06 WAR08

Catalog Number

1/43/81/2

inch mmO.D.

0.530.650.78


psi MPaMin.B.P.

inch mmMin.B.R.


1B UL/30 UL/30



3.0MPa400PSI

VWI.D.

VW16VW20VW24VW32

Catalog Number

11-1/41-1/2

2

inch mmO.D.

1.401.641.902.50

inch mm

400

psi MPaMax.W.P.

psi MPaMin.B.P.

5.517.099.06

10.63

inch mmMin.B.R.

0.630.770.901.53


1W

2W

UT/27

LC/27HW/40

UT/27

LC/27HW/40



98.0～137.0MPa14,200～19,900PSI

JWKI.D.

JWK04 JWK06 JWK08



psi MPaMin.B.P.

inch mmMin.B.R.


4S+1W EK/45

Factory-assembledCompatible coupling/relevant page

20

SAE series / DIN series

Reinforcing

8

6.39.5

12.7

18.624.627.8

137.0

98.0

275.0219.5192.0

40,00032,00028,000

90120170

8501,1501,360

6.39.5

12.7

16.720.822.2

68.5196.0154.0138.0

28,500 22,500 20,000

90140170

450750830

14.0 35.02,000 5,000

3.0 12.01,600

25.431.838.150.8

35.641.748.363.4

140180230270

9401,1501,3502,300



●●●●●●



●●●●●


●●●●●


6.39.5

12.7

13.416.520.2

507080

140200250

20.5 51.53,000 8,0006.39.5

12.7

13.416.519.8

505070

140200250

1.971.972.76

0.310.440.55








1/43/81/2

0.660.820.87

9,9003.545.516.69

0.300.430.55

1/43/81/2

0.730.971.09

19,900

14,200

3.544.726.69

0.300.430.55




R15A

R15A06R15A08R15A12R15A16R15A20R15A24

3/81/23/4

11-1/41-1/2

9.512.719.025.431.838.1

0.800.941.211.521.962.26

20.323.830.738.749.857.3

6,0006,0006,0006,0006,0006,000

42.042.042.042.042.042.0

24,00024,00024,00024,00024,00024,000

168.0168.0168.0168.0168.0168.0

5.917.87

10.4312.9917.5220.87

150200265330445530

720920

1,4702,1803,8904,760

0.480.610.981.452.593.17

4S

6S






R13A

R13A12R13A16R13A20R13A24R13A32

19.025.431.838.150.8

3/41

1-1/41-1/2

2

1.261.521.962.262.80

32.138.749.857.371.1

5,0005,0005,0005,0005,000

35.035.035.035.035.0

20,00020,00020,00020,00020,000

137.9137.9137.9137.9137.9

9.4511.8116.5419.6925.20

240300420500640

1,6002,2504,4004,8007,200

1.071.502.933.204.80

SAE 100R13

6S

4S


4S(R13A12/R13A16)6S(R13A20/R13A24/R13A32)




4SP


3/81/25/83/4

11-1/41-1/2

9.512.715.919.025.431.838.1

0.840.971.111.271.562.002.25

21.424.628.232.239.750.857.2

6,5006,0005,1005,1004,1003,0002,700

44.541.535.035.028.021.018.5

26,00024,00020,40020,40016,40012,00010,800

178.0166.0140.0140.0112.084.074.0

7.099.069.84

11.8113.3918.1122.05

180230250300340460560

820950

1,2001,6002,3003,2003,800

0.550.630.801.071.532.132.53

4S





4SH


3/41

1-1/41-1/2

2

19.025.431.838.150.8

1.271.521.792.112.68

32.238.745.553.568.1

6,1005,5004,7004,2003,600

42.038.032.529.025.0

24,40022,00018,80016,80014,400

168.0152.0130.0116.0100.0

11.0213.3918.1122.0527.56

280340460560700

1,6002,2502,6003,2004,800

1.071.501.732.133.20

4S





R12A


3/81/25/83/4

11-1/41-1/2

2

9.512.715.919.025.431.838.150.8

0.800.941.081.211.501.852.112.63

20.323.827.430.738.047.053.566.7

4,0004,0004,0004,0004,0003,0002,5002,500

28.028.028.028.028.021.017.517.5

16,00016,00016,00016,00016,00012,00010,00010,000

112.0112.0112.0112.0112.084.070.070.0

4.927.097.879.45

11.8116.5419.6925.20

125180200240300420500640

750800

1,1001,2501,9502,8003,3304,400

0.500.530.730.831.301.872.222.93

4S



68.5MPa9,900PSI

JW70I.D.

JW7004JW7006JW7008



psi MPaMin.B.P.

inch mmMin.B.R.


2W

4S

ZP/45KH/40UB/34

ZP/45－

UB/34



14.0MPa2,000PSI

WA14I.D.

WA1404WA1406WA1408

Catalog Number

1/43/81/2

inch mmO.D.

0.530.650.80


psi MPaMin.B.P.

1.972.763.15

inch mmMin.B.R.

0.310.440.55


1B UL/30 UL/30



20.5MPa3,000PSI

WARI.D.

WAR04 WAR06 WAR08

Catalog Number

1/43/81/2

inch mmO.D.

0.530.650.78


psi MPaMin.B.P.

inch mmMin.B.R.


1B UL/30 UL/30



3.0MPa400PSI

VWI.D.

VW16VW20VW24VW32

Catalog Number

11-1/41-1/2

2

inch mmO.D.

1.401.641.902.50

inch mm

400

psi MPaMax.W.P.

psi MPaMin.B.P.

5.517.099.06

10.63

inch mmMin.B.R.

0.630.770.901.53


1W

2W

UT/27

LC/27HW/40

UT/27

LC/27HW/40



98.0～137.0MPa14,200～19,900PSI

JWKI.D.

JWK04 JWK06 JWK08



psi MPaMin.B.P.

inch mmMin.B.R.


4S+1W EK/45


21

Special Application Rubber Hoses

Compatible Fluids / Mineral hydraulic oil or mineral engine oilInner Tube: Heat- and oil-resistant synthetic rubberOuter Cover: Heat-, oil-, and weather-resistant synthetic rubber

●

●●SA Series For Steam Compatible Fluid / Steam

Inner Tube / Heat Resistant Synthetic RubberOuter Cover / Heat Resistant Synthetic RubberTemperature Range: fluid / 4℃ to 210℃(39°F to 410°F)Temperature Range : ambient / -40℃ to 70℃(-40°F to 158°F)

●●●●●

12.719.025.4

26.132.441.6

150210250

610810

1,320SA hose does not fit mineral oil application.

Couplings SK Series

0.681.221.36

310555615

718398

182022

273641

1.061.421.61

0.710.790.87

1.061.421.61

1/23/41

SK08RSK12RSK16R

R mminch mm mm lbsinch ginch

LA

Y(HEX)RCatalog Number

Thread

Male British Tapered Pipe Thread(BSPT)

FL

30°

G X(HEX)Y(HEX)

Female Japanese Industrial Pipe Thread (JIS) Female 30°Seat

0.691.341.48

315610670

7188

101

273641

1.061.421.61

2.803.463.98

1/23/41

SK08FSK12FSK16F

mminch mm lbs ginchCatalog Number

Thread

■Be sure to read the following before use

214200183

100

0 1.0 1.5 2.0Pressure(MPa)

Temperature

saturatedsteam line

Superheatedsteam

hot watercondensate

Use this hose in area.

In case of 200℃, if p ressu re i s l e ss than 1.5Mpa, hose life is reduced dra-matically by super-heated steam condi-tions. Therefore in case of 200℃ situa-tion, pressure 1.5 to 2.0 MPa is required.

Not following these instructions will lead to hose failure like hose coupling blow-off and leakage.

Insert

Hook

Shell

◎Set the hook of shell in the groove of insert◎SK series is all re-usable type

Retighten the bolt if leakage from coupling is foundIf retightening can not stop leakage, cut the hose and retighten.

◎Tighten the bolt referring to the following crevice figure

Hose sizeSA08SA12SA16

Crevice (mm) Torelance

±1256

In case the clamping portion becomes loose after a certain period of usage, retightening will be required.

■How to install SK series couplings

Crevice(both end)

6.39.5

12.7

12.516.019.0

60 70

120

120170220

Heat- and Oil-resistant Hoses

●Temperature Range: fluid / -40℃ to 93℃(Oil), 0℃ to 50℃(Water) -40°F to 199°F(Oil), 32°F to 122°F(Water)●Temperature Range : ambient / -40℃ to 70℃(Oil), 0℃ to 70℃(Water) -40°F to 158°F(Oil), 32°F to 158°F(Water)

Couplings and adaptor AT series and Adapters■Couplings

R Y A D （L）

304580

175

0.070.100.180.39

8121521

43455272

13151820

17192430

0.670.750.941.18

0.670.750.941.26

0.310.470.590.83

1.571.691.972.68

0.510.590.710.79

0.310.470.590.83

1.691.772.052.83

1/43/81/23/4

AT04RAT06RAT08RAT12R

Rmaterials : Brass

tightening torque ( page 82 )

■Adapters materials : Brass

F R Y D

304070

120

0.070.090.150.26

40435068

8121521

17192432

1/43/81/23/4

AT04FAT06FAT08FAT12F

R Y A （L）

305090

160

0.070.110.200.35

37414854

13151820

B

16182022

14192230

1/43/81/23/4

8001RG04H14B8001RG06H19B8001RG08H22B8001RG12H30B

R C GD

5070

110210

0.110.150.240.46

24273040

11111422

27303237

1/43/81/23/4

8025RG048025RG068025RG088025RG12

R Y

LA

G Y

φD

φD

L

30°

GR Y

ＡＢＬ

30°

30°

R

GC

φｂ

φｂd

G

Catalog Number

Catalog Number

CatalogNumber

CatalogNumber

（L）

inch mm

inch mm inch mm inch mm

inch mm inch mm inch mm ibs g

ibs g

inch mm


inch mm inch mm inch mm0.550.750.871.18

1.061.181.261.46

0.941.061.181.57

0.430.430.550.87

1.451.611.892.13

0.510.590.710.79

0.630.710.790.87

ibs

ibs

g

g

Male British TaperedPipe Thread(BSPT)

Female Japanese Industrial PipeThread (JIS) Female 30°Seat

Cut the hose perpendicular to the axis by tube cutter. Put water or soap suds hose inside and insert-ing portion of coupling.

■How to install coupling

Cutting surface should be less than 10 degree.

Fix the coupling with clamp and insert the hose.

Short grip will cause oil leakage.

＊Check the delivery dates of 100m hoses, as they are available on request.

*For information about other size hoses, contact us.　*Be sure to read the following description.

Standard product — Material: SS or SC equivalent steel, Surface: Zinc plating or chromate treatment (for cores only)

The water evaporation temperature, which depends on pressure, is also called the saturation temperature. Water at the saturation temperature is called saturated water. While this saturated water is being heated, it continues to evaporate without any increase in its temperature. The condensate (vapor + water) generated at this stage is called hot water condensate.

*1 Hot water condensateW h i l e t h e h o t w a t e r condensate is being heated, t he wa te r con t i nues to e v a p o r a t e a n d f i n a l l y d i sappears . The s team generated when there is no water remaining is called saturated steam.

*2 Saturated steamWhen the saturated steam is further heated, its temperature rises. This steam is ca l led superheated steam.

*3 Superheated steam

●

●

Temperature Range: fluid / −40°C to 135°C (−40°F to 275°F)Temperature Range: ambient / −40°C to 100°C (−40°F to 212°F)

Push on Hose

●Compatible Fluid / Mineral Oil, Water ●Inner Tube / Oil Resistant Synthetic Rubber●Outer Cover / Weather Resistant Synthetic Rubber

●Use SA series steam hoses to convey hot water condensate*1 or saturated steam*2. Do not use them to convey superheated steam*3 or a mixture of steam and air. Doing so could deteriorate the inner tube rubber, significantly reducing the life of the hose. (The terms marked with an asterisk are described below.)

For steam piping, use the SF series hoses (shown on page 51).Replacement of the hose may be required after a short usageperiod depending on the usage conditions.

2.0300 12.01,800


2.0MPa300PSI

SAI.D.

SA08 SA12 SA16

Catalog Number

1/23/4

1

inch mmO.D.

1.031.281.64


psi MPaMin.B.P.

5.918.279.84

inch mmMin.B.R.

0.41 0.54 0.88


1W SK


19.025.4

26.533.3

140180

5508507.0 28.01,000 4,000


7.0MPa1,000PSI

HMI.D.

HM12HM16

Catalog Number

3/41

inch mmO.D.

1.041.31


psi MPaMin.B.P.

5.517.09

inch mmMin.B.R.

0.370.57


1W UN/27


2.0 10.0300 1,500


2.0MPa300PSI

ACTI.D.

ACT04ACT06ACT08

Catalog Number

1/43/81/2

inch mmO.D.

0.490.630.75


psi MPaMin.B.P.

2.362.764.72

inch mmMin.B.R.

0.08 0.11 0.15


1B AT


You can easily attach couplings to these hoses without using a crimping machine. This enables on-site assembly, so you no longer need to have extra assembled hoses in stock.

Y A （L） Weight

Y （L） Weight

22


Reinforcing

6.39.5

12.7

18.624.627.8

137.0

98.0

275.0219.5192.0

40,00032,00028,000

90120170

8501,1501,360

6.39.5

12.7

16.720.822.2

68.5196.0154.0138.0

28,500 22,500 20,000

90140170

450750830

14.0 35.02,000 5,000

3.0 12.01,600

25.431.838.150.8

35.641.748.363.4

140180230270

9401,1501,3502,300



●●●●●●



●●●●●


●●●●●


6.39.5

12.7

13.416.520.2

507080

140200250

20.5 51.53,000 8,0006.39.5

12.7

13.416.519.8

505070

140200250

1.971.972.76

0.310.440.55








1/43/81/2

0.660.820.87

9,9003.545.516.69

0.300.430.55

1/43/81/2

0.730.971.09

19,900

14,200

3.544.726.69

0.300.430.55




R15A

R15A06R15A08R15A12R15A16R15A20R15A24

3/81/23/4

11-1/41-1/2

9.512.719.025.431.838.1

0.800.941.211.521.962.26

20.323.830.738.749.857.3

6,0006,0006,0006,0006,0006,000

42.042.042.042.042.042.0

24,00024,00024,00024,00024,00024,000

168.0168.0168.0168.0168.0168.0

5.917.87

10.4312.9917.5220.87

150200265330445530

720920

1,4702,1803,8904,760

0.480.610.981.452.593.17

4S

6S






R13A

R13A12R13A16R13A20R13A24R13A32

19.025.431.838.150.8

3/41

1-1/41-1/2

2

1.261.521.962.262.80

32.138.749.857.371.1

5,0005,0005,0005,0005,000

35.035.035.035.035.0

20,00020,00020,00020,00020,000

137.9137.9137.9137.9137.9

9.4511.8116.5419.6925.20

240300420500640

1,6002,2504,4004,8007,200

1.071.502.933.204.80

SAE 100R13

6S

4S


4S(R13A12/R13A16)6S(R13A20/R13A24/R13A32)




4SP


3/81/25/83/4

11-1/41-1/2

9.512.715.919.025.431.838.1

0.840.971.111.271.562.002.25

21.424.628.232.239.750.857.2

6,5006,0005,1005,1004,1003,0002,700

44.541.535.035.028.021.018.5

26,00024,00020,40020,40016,40012,00010,800

178.0166.0140.0140.0112.084.074.0

7.099.069.84

11.8113.3918.1122.05

180230250300340460560

820950

1,2001,6002,3003,2003,800

0.550.630.801.071.532.132.53

4S





4SH


3/41

1-1/41-1/2

2

19.025.431.838.150.8

1.271.521.792.112.68

32.238.745.553.568.1

6,1005,5004,7004,2003,600

42.038.032.529.025.0

24,40022,00018,80016,80014,400

168.0152.0130.0116.0100.0

11.0213.3918.1122.0527.56

280340460560700

1,6002,2502,6003,2004,800

1.071.501.732.133.20

4S





R12A


3/81/25/83/4

11-1/41-1/2

2

9.512.715.919.025.431.838.150.8

0.800.941.081.211.501.852.112.63

20.323.827.430.738.047.053.566.7

4,0004,0004,0004,0004,0003,0002,5002,500

28.028.028.028.028.021.017.517.5

16,00016,00016,00016,00016,00012,00010,00010,000

112.0112.0112.0112.0112.084.070.070.0

4.927.097.879.45

11.8116.5419.6925.20

125180200240300420500640

750800

1,1001,2501,9502,8003,3304,400

0.500.530.730.831.301.872.222.93

4S



68.5MPa9,900PSI

JW70I.D.

JW7004JW7006JW7008



psi MPaMin.B.P.

inch mmMin.B.R.


2W

4S

ZP/45KH/40UB/34

ZP/45－

UB/34



14.0MPa2,000PSI

WA14I.D.

WA1404WA1406WA1408

Catalog Number

1/43/81/2

inch mmO.D.

0.530.650.80


psi MPaMin.B.P.

1.972.763.15

inch mmMin.B.R.

0.310.440.55


1B UL/30 UL/30



20.5MPa3,000PSI

WARI.D.

WAR04 WAR06 WAR08

Catalog Number

1/43/81/2

inch mmO.D.

0.530.650.78


psi MPaMin.B.P.

inch mmMin.B.R.


1B UL/30 UL/30



3.0MPa400PSI

VWI.D.

VW16VW20VW24VW32

Catalog Number

11-1/41-1/2

2

inch mmO.D.

1.401.641.902.50

inch mm

400

psi MPaMax.W.P.

psi MPaMin.B.P.

5.517.099.06

10.63

inch mmMin.B.R.

0.630.770.901.53


1W

2W

UT/27

LC/27HW/40

UT/27

LC/27HW/40



98.0～137.0MPa14,200～19,900PSI

JWKI.D.

JWK04 JWK06 JWK08



psi MPaMin.B.P.

inch mmMin.B.R.


4S+1W EK/45


21


9

Compatible Fluids / Mineral hydraulic oil or mineral engine oilInner Tube: Heat- and oil-resistant synthetic rubberOuter Cover: Heat-, oil-, and weather-resistant synthetic rubber

●

●●SA Series For Steam Compatible Fluid / Steam

Inner Tube / Heat Resistant Synthetic RubberOuter Cover / Heat Resistant Synthetic RubberTemperature Range: fluid / 4℃ to 210℃(39°F to 410°F)Temperature Range : ambient / -40℃ to 70℃(-40°F to 158°F)

●●●●●

12.719.025.4

26.132.441.6

150210250

610810

1,320SA hose does not fit mineral oil application.

Couplings SK Series

0.681.221.36

310555615

718398

182022

273641

1.061.421.61

0.710.790.87

1.061.421.61

1/23/41

SK08RSK12RSK16R

R mminch mm mm lbsinch ginch

LA

Y(HEX)RCatalog Number

Thread

Male British Tapered Pipe Thread(BSPT)

FL

30°

G X(HEX)Y(HEX)

Female Japanese Industrial Pipe Thread (JIS) Female 30°Seat

0.691.341.48

315610670

7188

101

273641

1.061.421.61

2.803.463.98

1/23/41

SK08FSK12FSK16F

mminch mm lbs ginchCatalog Number

Thread

■Be sure to read the following before use

214200183

100

0 1.0 1.5 2.0Pressure(MPa)

Temperature

saturatedsteam line

Superheatedsteam

hot watercondensate

Use this hose in area.

In case of 200℃, if p ressu re i s l e ss than 1.5Mpa, hose life is reduced dra-matically by super-heated steam condi-tions. Therefore in case of 200℃ situa-tion, pressure 1.5 to 2.0 MPa is required.

Not following these instructions will lead to hose failure like hose coupling blow-off and leakage.

Insert

Hook

Shell

◎Set the hook of shell in the groove of insert◎SK series is all re-usable type

Retighten the bolt if leakage from coupling is foundIf retightening can not stop leakage, cut the hose and retighten.

◎Tighten the bolt referring to the following crevice figure

Hose sizeSA08SA12SA16

Crevice (mm) Torelance

±1256

In case the clamping portion becomes loose after a certain period of usage, retightening will be required.

■How to install SK series couplings

Crevice(both end)

6.39.5

12.7

12.516.019.0

60 70

120

120170220

Heat- and Oil-resistant Hoses

●Temperature Range: fluid / -40℃ to 93℃(Oil), 0℃ to 50℃(Water) -40°F to 199°F(Oil), 32°F to 122°F(Water)●Temperature Range : ambient / -40℃ to 70℃(Oil), 0℃ to 70℃(Water) -40°F to 158°F(Oil), 32°F to 158°F(Water)

Couplings and adaptor AT series and Adapters■Couplings

R Y A D （L）

304580

175

0.070.100.180.39

8121521

43455272

13151820

17192430

0.670.750.941.18

0.670.750.941.26

0.310.470.590.83

1.571.691.972.68

0.510.590.710.79

0.310.470.590.83

1.691.772.052.83

1/43/81/23/4

AT04RAT06RAT08RAT12R

Rmaterials : Brass

tightening torque ( page 82 )

■Adapters materials : Brass

F R Y D

304070

120

0.070.090.150.26

40435068

8121521

17192432

1/43/81/23/4

AT04FAT06FAT08FAT12F

R Y A （L）

305090

160

0.070.110.200.35

37414854

13151820

B

16182022

14192230

1/43/81/23/4

8001RG04H14B8001RG06H19B8001RG08H22B8001RG12H30B

R C GD

5070

110210

0.110.150.240.46

24273040

11111422

27303237

1/43/81/23/4

8025RG048025RG068025RG088025RG12

R Y

LA

G Y

φD

φD

L

30°

GR Y

ＡＢＬ

30°

30°

R

GC

φｂ

φｂd

G

Catalog Number

Catalog Number

CatalogNumber

CatalogNumber

（L）

inch mm


inch mm inch mm inch mm ibs g

ibs g

inch mm


inch mm inch mm inch mm0.550.750.871.18

1.061.181.261.46

0.941.061.181.57

0.430.430.550.87

1.451.611.892.13

0.510.590.710.79

0.630.710.790.87

ibs

ibs

g

g

Male British TaperedPipe Thread(BSPT)

Female Japanese Industrial PipeThread (JIS) Female 30°Seat

Cut the hose perpendicular to the axis by tube cutter. Put water or soap suds hose inside and insert-ing portion of coupling.

■How to install coupling

Cutting surface should be less than 10 degree.

Fix the coupling with clamp and insert the hose.

Short grip will cause oil leakage.

＊Check the delivery dates of 100m hoses, as they are available on request.

*For information about other size hoses, contact us.　*Be sure to read the following description.

Standard product — Material: SS or SC equivalent steel, Surface: Zinc plating or chromate treatment (for cores only)

The water evaporation temperature, which depends on pressure, is also called the saturation temperature. Water at the saturation temperature is called saturated water. While this saturated water is being heated, it continues to evaporate without any increase in its temperature. The condensate (vapor + water) generated at this stage is called hot water condensate.

*1 Hot water condensateW h i l e t h e h o t w a t e r condensate is being heated, t he wa te r con t i nues to e v a p o r a t e a n d f i n a l l y d i sappears . The s team generated when there is no water remaining is called saturated steam.

*2 Saturated steamWhen the saturated steam is further heated, its temperature rises. This steam is ca l led superheated steam.

*3 Superheated steam

●

●

Temperature Range: fluid / −40°C to 135°C (−40°F to 275°F)Temperature Range: ambient / −40°C to 100°C (−40°F to 212°F)

Push on Hose

●Compatible Fluid / Mineral Oil, Water ●Inner Tube / Oil Resistant Synthetic Rubber●Outer Cover / Weather Resistant Synthetic Rubber

●Use SA series steam hoses to convey hot water condensate*1 or saturated steam*2. Do not use them to convey superheated steam*3 or a mixture of steam and air. Doing so could deteriorate the inner tube rubber, significantly reducing the life of the hose. (The terms marked with an asterisk are described below.)

For steam piping, use the SF series hoses (shown on page 51).Replacement of the hose may be required after a short usageperiod depending on the usage conditions.

2.0300 12.01,800


2.0MPa300PSI

SAI.D.

SA08 SA12 SA16

Catalog Number

1/23/4

1

inch mmO.D.

1.031.281.64


psi MPaMin.B.P.

5.918.279.84

inch mmMin.B.R.

0.41 0.54 0.88


1W SK


19.025.4

26.533.3

140180

5508507.0 28.01,000 4,000


7.0MPa1,000PSI

HMI.D.

HM12HM16

Catalog Number

3/41

inch mmO.D.

1.041.31


psi MPaMin.B.P.

5.517.09

inch mmMin.B.R.

0.370.57


1W UN/27


2.0 10.0300 1,500


2.0MPa300PSI

ACTI.D.

ACT04ACT06ACT08

Catalog Number

1/43/81/2

inch mmO.D.

0.490.630.75


psi MPaMin.B.P.

2.362.764.72

inch mmMin.B.R.

0.08 0.11 0.15


1B AT


You can easily attach couplings to these hoses without using a crimping machine. This enables on-site assembly, so you no longer need to have extra assembled hoses in stock.

Y A （L） Weight

Y （L） Weight

22


Reinforcing

10


Documents

HYDRAULIC HOSE - ujprimatek.com · %5,'*(6721( &25325$7,21 .\REDVKL FKRPH &KXR NX 7RN\R -DSDQ ... impulse cycles conforming to JIS heavy duty application standard B8360