HTP100EX-AExplosion proof LED helideck touchdown/positioning light panel

Orga BVStrickledeweg 133125 AT SCHIEDAMThe Netherlands

P.O. Box 30463101 EA SCHIEDAMThe Netherlands

T +31 (0)10 208 5555F +31 (0)10 437 8445info@orga.nlwww.orga.nl

All values mentioned in this document are typical values

Document can be subject to modifications, without prior notice. Datasheet no.: HTP100EX-A rev 11

CAP437 explosion proof LED helideck touchdown/positioning light panel used inconjunction with a control panel and the the touchdown/positioning marking (Circle). Longlife LEDs and light weight design, which is suitable for direct mounting on the helideck dueto the low profile (<25mm), makes the product ideal for the environmental conditions aswell as easy installation.

Key features• Panel used for helideck

touchdown/positioning system;'circle'

• Suitable for Zone 1 and 2 areaswith gas explosion hazard

• Low profile design (<25mm)allows direct mounting onhelideck

• Offshore resistant, fullysealed, high quality marineplastic materials

• Semi-flex construction to allowfor deck distortions andimproved impact resistance

• Stainless steel mountingbrackets to prevent corrosionproblems, and integrated cableconnection

• State of the art high power LEDsand technology provide superiorlife and reliability

• Fully offshore trialled to meetthe operational andenvironmental requirements

Standards/Certification• Certified to CAA-UK CAP 437;

Offshore helicopter landingareas - Guidance on standards,December 2016, chapter 4 andappendix C

• Complies with ICAO Annex 14,Volume I, Appendix I, November2016, Figure A1-1 - Colours foraeronautical ground lights

• ABS Certificate of DesignAssessment - Orga CAP437 TD/PMCircle-H System -15-LD1264711-PDA

• DEKRA 11ATEX0186; ATEX II 2 G Exe mb [ib] IIC T6 Gb

• EN 60079-0, EN 60079-7, EN60079-11 and EN 60079-18

• IECEx DEK 11.0072; Ex e mb [ib]IIC T6 Gb

• IEC 60079-0, IEC 60079-7, IEC60079-11 and IEC 60079-18

• ABNT NBR IEC 60079-0, ABNT NBRIEC 60079-7, ABNT NBR IEC60079-11 and ABNT NBR IEC60079-18

• Inmetro NCC 17.0029

Performance characteristics• Steady burning; yellow • Effective intensity: 0-10° max.

60cd; 10-20° max. 45cd and20-90° max. 15cd

• Horizontal beam coverage: 2x160°• Vertical beam profile: in

compliance with above mentionedCAA requirements

• Colour chromaticity within theboundaries as specified by ICAO

Electrical characteristics• Operating voltage: Low (10-15V)

DC input from Orga control panel• Power consumption: 1.5W average • Connection details: Orga custom

offshore

Physical characteristics• Dimensions (L x W x H):

503 x 290 x 24mm• Weight: 0.8kg • Degree of protection: IP66, IP67

and IP69• Operating temperature range:

-25°C to +55°C

System design, control andmonitoring • Fault monitoring with fail

indication via separate systemcontrol and monitoring box (seeseparate data sheet)

• Custom designed cables withvulcanized cable terminationprotection and captiveconnection screws; multiplelengths to allow for allconfigurations

HTP100EX-AExplosion proof LED helideck touchdown/positioning light panel

Orga BVStrickledeweg 133125 AT SCHIEDAMThe Netherlands

P.O. Box 30463101 EA SCHIEDAMThe Netherlands

T +31 (0)10 208 5555F +31 (0)10 437 8445info@orga.nlwww.orga.nl

All values mentioned in this document are typical values

Document can be subject to modifications, without prior notice. Datasheet no.: HTP100EX-A rev 11 page 2 of 2