HT 73 / B / 103 / 0308 / E Hydraulic Pilot Control Valves · hydraulic pilot control valves ht 73 / b / 103 / 0308 / e 23 to 51 cm3/rev (1.4 to 3.1 cu.in/rev) 280 bar (4000 psi) peak

Hydraulic Pilot Control ValvesHT 73 / B / 103 / 0308 / E

23 to 51 cm3/rev (1.4 to 3.1 cu.in/rev)280 bar (4000 ps i) peak pressure

HANDLESMULTIFUNCTION ERGONOMIC

AND KNOBS

HPVL/SPVL SERIESHYDRAULIC PILOT CONTROLS

PRSVS/M SERIESSINGLE AND SECTIONAL PILOT CONTROL VALVES

PRSVB/L SERIESONE AND TWO LEVER OPERATED

PILOT CONTROL VALVES

HPV SERIES HYDRAULIC PILOT CONTROLS

PRSVP SERIESFOOT PEDALS

SUH SERIES PILOT SUPPLY UNITS

OIL SAMPLING VALVE

Via M.L. King, 6 - 41122 MODENA (ITALY)

Tel: +39 059 415 711

Fax: +39 059 415 729 / 059 415 730

INTERNET: http://www.hansatmp.it

E-MAIL: [email protected]

HYDRAULIC COMPONENTS

HYDROSTATIC TRANSMISSIONS

GEARBOXES - ACCESSORIES

CPVL SERIES HYDRAULIC PILOT CONTROLS

HT 73 / B / 103 / 0308 / E Pag. 3

Hydraulic Pilot Control Valves

CONTENTS

Handles

Hydraulic Pilot Control HPVL / SPVL Series

Single and Sectional Pilot Control PRSVS / M Series

Hydraulic Pilot Control CPVL Series

One and Two Lever Operated Pilot Control Valves PRSVB / L Series

Hydraulic Pilot Control HPV Series

Foot Pedal Hydraulic Pilot Control PRSVP Series

Pilot Supply Units SUH Series

Characteristic Curves

Oil Sampling Valves

5 - 15

17 - 22

23 - 29

31 - 34

35 - 41

43 - 45

47 - 51

53 - 57

59 - 65

67 - 69

HT 73 / B / 103 / 0308 / E Pag. 5


HANDLESMULTIFUNCTION ERGONOMIC

AND KNOBS

Pag. 6 HT 73 / B / 103 / 0308 / E


H A N D L E S INT R ODUC T ION

H A N D L E S E R G ONOMIC AND K NOB MODE L C ODING

K - K S E R I E S K N O B S

s ee page 3

K B = K nob without electric s witch

K C = K nob without electric s witch

K J = C onical handle with electric s witch

K K = K nob without electric s witch

K L = C onical handle without electric s witch

K P = S pherical knob without electric s witch

K W = K nob with electric s witch

S - S S E R I E S E R G O N O M I C

s ee page 4

S A = Handle without electric s witch

S D = Handle with electric s witch

S S = Handle with electric s witch to clos eand s afety button

S X = Handle with electric s witch to clos e

S Y = Handle with electric s witch dualrocker type

S Z = Handle with electric s witch to clos ewith detent

H A N D L E S A N D K N O B S

T he handles and knobs included in this catalogue

are available for fitting either to the extens ive range

of our pilot valve product

T he materials are chosen to be suitable for either

internal or external use and are res istant to ultra-

violet effects . T hey are also suitable for a wide

range of other environmental conditions .

T he standard straight ergonomic handle is

available with a range of switches and push

buttons , while the MF E handle range is available

with an extens ive range of switches and push

buttons to suit different operating and

environmental conditions . T he MF E handle

range can be configured to suit either left hand

or right hand operation.

Different circuit arrangements can be

accommodated within the handle and the wiring

can be built into connectors to customer

s pecifications .

B E N E F I T S

R ange of knobs for individual lever control

R ange of s traight levers , with and without s witches ,for dual axis controls

E xtens ive range of s tylis h multi functional leveroptions

E xtens ive range of electrical s witch and buttonoptions

Adaptable to both Hansa-Tmp s.r.l. andother manufacturers equipment

C ircuits and connectors to cus tomer requirements

S witch options allow left hand or right hand operation

Tolerant to many environmental conditions

High durability, low maintenance

HT 73 / B / 103 / 0308 / E Pag. 7


K S E R I E S H A N D L E S T E C HNIC AL DATA

K B

T y pe : S A

K N O B

without electric switch

K C K N O B


K J C O N I C A L H A N D L E

with electric switch

K K K N O B


K L C O N I C A L H A N D L E


K P S P H E R I C A L K N O B


K W K N O B


wiringdiagram

ø34 (1.34)

M10 ø10 (0.39)

ø45 (1.77)

40

(1

.57

5)

67

(2

.64

)

50

(1

.97

)

65

(2

.56

)

8 (

0.3

15

)

ø32 (1.26)

ø60 (2.36)

M12

66

.5 (

2.6

2)

18

(0.7

1)

ø8 (0.315)

ø27 (1.06)

25

(0

.98

)

42

(1

.65

)

ø45 (1.77)

42

(1

.65

)

ø12 (0.47)

21

(0

.83

)

wiring diagram

ø32 (1.26)

ø10 (0.39)

56

(2

.21

)

ø10 (0.39)

Pag. 8 HT 73 / B / 103 / 0308 / E


S S E R I E S H A N D L E S T E C HNIC AL DATA

S A

T y pe : S A

E R G O N O M I C H A N D L E


S D

S X E R G O N O M I C H A N D L E

with electric switch to close

S Y E R G O N O M I C H A N D L E

with electric s witch dual rocker type

S Z E R G O N O M I C H A N D L E

with electric switch to close with detent

wiring diagram wiring diagram wiring diagram

16

7 (

6.5

75

)

ø39.5 (1.56)

ø52 (2.05)

ø39.5 (1.56)

ø52 (2.05)

ø39.5 (1.56)

ø52 (2.05)

ø39.5 (1.56)

12

3 (

4.8

4)

11

3 (

4.4

5)

16

7 (

6.5

75

)

12

3 (

4.8

4)

11

3 (

4.4

5)

16

7 (

6.5

75

)

12

3 (

4.8

4)

11

3 (

4.4

5)

16

7 (

6.5

75

)

12

3 (

4.8

4)

11

3 (

4.4

5)

ø52 (2.05)

29

(1.1

4)

20

(.7

9)

15

(.5

9)

29

(1.1

4)

20

(.7

9)

15

(.5

9)

29

(1.1

4)

20

(.7

9)

15

(.5

9)

29

(1.1

4)

20

(.7

9)

15

(.5

9)

M10

17 (0.67)

ø19 (0.75)

M10

17 (0.67)

ø19 (0.75)

M10

17 (0.67)

ø19 (0.75)

M10

17 (0.67)

ø19 (0.75)

E R G O N O M I C H A N D L E


wiring diagram

ø52 (2.05)

ø39.5 (1.56)

16

7 (

6.5

75

)

12

3 (

4.8

4)

11

3 (

4.4

5)

29

(1.1

4)

20

(.7

9)

15

(.5

9)

M10

17 (0.67)

ø19 (0.75)5

6 (

2.2

05

)

P 2

P 1

P1 P2

S S E R G O N O M I C H A N D L E

wiring diagram

ø52 (2.05)

ø39.5 (1.56)

16

7 (

6.5

75

)

12

3 (

4.8

4)

11

3 (

4.4

5)

29

(1.1

4)

20

(.7

9)

15

(.5

9)

M10

17 (0.67)

ø19 (0.75)

with electric switch to close and safety button

HT 73 / B / 103 / 0308 / E Pag. 9


H A N D L E S MF E MODE L C ODING

E X X X X X X X - X X - X X X X + X

R o c k e r s w it c h (omit digit if not required )

This vers ion is not available in combination with pus h buttons witches types B and D.

P = Horizontal mounting with function s ymbols , rated for 6 A at 250 VAC

Q = Vertical mounting with function s ymbols , rated for 6 A at 250 VAC

R = Long life vers ion (106 cycles ), rated for 3 A at 30 VDC

S = Waterproof IP 68 rated for 10 A at 250 VAC(can be mounted in either horizontal or vertical pos ition)

M o unt ing a da pt e r (s ee page 5)

0 = s tandard s traight M10x1.5

1 = tilted 15° north

2 = tilted 15° eas t

3 = tilted 15° wes t

4 = combined tilting (15° north and 10° eas t) = LH handle

5 = combined tilting (15° north and 10° wes t) = R H handle

6 = with s pherical joint, adjus table from 0° up to 20° in any direction

7 = as item 6 + bottom mounting adapter

G a it e r c o l la r (s ee page 6)

O = bas ic vers ion without provis ion for protection boot

R = with provis ion for round boot

S = with provis ion for s quare boot

W ir ing t e r m ina t io n

0 = no leads

1 = flying leads

2 = with connector (maker and model number to be s pecified on order)

S a fe t y t r igge r in po s i t io n 7

X = no s afety trigger

T = with s afety trigger (available only red)

P u s h bu t t o n /s w it c h in po s i t io n s 8 + 1 5

(not applicable for s witch configuration B )F or each pus h button/s witch, ins ert ID pos ition numbers and colours(s ee 1÷6 pos ition) s eparated by “-“ and omit ones that are not required(i.e. 8R -10G = red pus h button/s witch in pos ition 8 and green pus hbutton/s witch in pos ition 10)Note: pus h button/s witch in pos ition 8 is rated 0.4 A at 32 VDC andavailable only red

P u s h bu t t o n /s w it c h in po s i t io n s 1 + 6

Ins ert ID letter for each pus h button/s witch chos en on the following lis tand in progres s ive s equence from pos ition 1 up to pos ition 6:

X = no button s witch

B = blue

G = green

R = red

Y = yellow

W = white (available for C configuration only)

L = s ignalling light

MF E = Multi-function E rgonomic

P u s h bu t t o n /s w it c h o pt io n s

A = s tandard with micro s witchesrated for 3 A at 30 V DC

B = s ealed vers ion with micros witchesrated for 3 A at 30 V DC + P C B

C = is olated vers ion (IP 67) with micros witches rated for 0.4 A at 30 VDC

D = dual axis / 4 contacts waterproofmicro s witches rated for 2 A at 30V DC (conformS with MIL s tandards )

(se

e p

ag

e 4

)

Pag. 10 HT 73 / B / 103 / 0308 / E


1 7P

QRS

1 21 3

1 41 51 6

78

91 01 1

2

3

456

1

1 2 3 4 5 6 7 8 9 1 0 1 1 1 2 1 3 1 4 1 5 1 6 1 7 P Q R SP U S H B U T T O N R O C K E R

RO

CK

ER

PU

SH

BU

TT

ON

1 7P

QRS

1 21 3

1 41 51 6

78

91 01 1

2

3

456

1


RO

CK

ER

PU

SH

BU

TT

ON

H A N D L E S MF E P US H B UT TONS C OMPAT IB ILIT Y TAB LE S

C ompatibility ofpus h button/s witchesand roc ker s witc hescombinationsF or S ealed B uttonType B

(Applicable only forpus h button/s witchesfitted into pos itions1 up to 6 and s afetytrigger in pos ition 7.)

C ompatibility ofpus h button/s witchesand roc ker s witc hescombinationsF or S tandard B uttonType A

17

16

1215

1

2 3

4

5 6

8

7

13 14

11

10

9

available combination

not available

KEY

HT 73 / B / 103 / 0308 / E Pag. 11


1 7P

QRS

1 21 3

1 41 51 6

78

91 01 1

2

3

456

1


RO

CK

ER

PU

SH

BU

TT

ON

**

*

*

****

****

1 7P

QRS

1 21 3

1 41 51 6

78

91 01 1

2

3

456

1


RO

CK

ER

PU

SH

BU

TT

ON

H A N D L E S MF E P US H B UT TONS C OMPAT IB ILIT Y TAB LE S

C ompatibility ofpus h button/s witchesand roc ker s witc hescombinationsF or Dual Axis B uttonType D

C ompatibility ofpus h button/s witchesand roc ker s witc hescombinationsF or Is olated B uttonType C

(*) Als o compatible incombination with alight (L) fitted inpos ition 1

(**) Als o compatible incombination with alight (L) fitted inpos ition 4

17

16

1215

1

2 3

4

5 6

8

7

13 14

11

10

9

available combination

not available

KEY

Pag. 12 HT 73 / B / 103 / 0308 / E


H A N D L E S MF E B UT TON T Y P E S AND P OS IT ION OP T IONS

MF E Multi F unctionE rgonomic handle fittedwith 2 dual axis (4 contacts )waterproof mini push buttons witches (Type D) to MILstandards

MF E Multi F unctionE rgonomic handlefitted with s tandardpus h button s witches(Type A) and verticalmounted rocker s witchand safety trigger(left view).

MF E Multi F unctionE rgonomic handle fittedwith s ealed pus h buttons witches (Type B ) mountedon P C B and mounting adaptoradjus table in any direction from0 up to 20°.

S tandard P us hB utton S witc h

T y pe A

ø10 (.39)

2.5

(.1

0)

S ealed P us hB utton S witc hT y pe B

ø14 (.55)

5 (

.20

)

Is o lated P us hB utton S witc h

T y pe C 6 (

.24

) Dual Axis P us hB utton S witc hT y pe D

ø18 (.71)

10

(.3

9)

ø17.5 (.69)

9 (

.35

)

ø10 (.39)

4.5

(.1

8)

33 (1.30)

S nap pus hbutton s witc h

(as fitted to front ofhandle in pos ition 8) S ignalling L E D (code L )

S a fety Tr igger

(as fitted to front ofhandle in pos ition 7)

A B

C D

S T A N D A R D S E A L E D

I S O L A T E D D U A L A X I S

MF E Multi F unctionE rgonomic handlefitted with 8 waterproofpus h button s witches(Type C ), two s ignallingLE D's and a s afety pus hbutton s witch on frontpos ition 8.

ø17.5 (.69)

HT 73 / B / 103 / 0308 / E Pag. 13


5 C O M B I N E D T I L T I N G L E F T H A N D

3 T I L T E D 1 5 o L E F T H A N D 4 C O M B I N E D T I L T I N G R I G H T H A N D

H A N D L E S MF E MOUNT ING ADAP T E R S

0 S T A N DA R D S T R A I G H T 1 T I L T E D 1 5 o F O R W A R D 2 T I L T E D 1 5 o R I G H T H A N D

6 W I T H B A L L J O I N T

7 W I T H B A L L J O I N T A N D

M O U N T I N G A D A P T E R

17 (0.67)

ø16 (0.63)

13

(0.51)

7(0

.27

5)

7(0

.27

5)

ø20 (0.79)

17 (0.67)

7(0

.27

5)

ø20 (0.79)

17 (0.67)

7(0

.27

5)

ø20 (0.79)

17 (0.67)

7 (

0.2

75

)

ø20 (0.79)

17 (0.67)

7 (

0.2

75

)

ø20 (0.79)

M30 x 1

30 (1.18)

20o MAX 20o MAX

10o

15o15o

15o 15o

20o MAX 20o MAX

M10x 1.5

11

(0.4

3)

10o

15o

M10 x 1.5

11

(0

.43

)

M10 x 1.5

11

(0.4

3)

M10 x 1.5

11

(0.4

3)

M10 x 1.5

11

(0.4

3)

M10 x 1.5

11

(0

.43

)

30 (1.18)

M30 x 1

M27 x 1.5

7 (

0.2

75

)

10

(0

.39

)

90o

9.5

(0

.37

5)

M30x 1

ø26

ø15

5 (

0.2

0)

12

(0

.47

)

146 (5.75)Ty pic a l H a ndleH eight for theMF E R a nge

Pag. 14 HT 73 / B / 103 / 0308 / E


H A N D L E S MF E R OC K E R S W IT C HE S

P H O R I Z O N T A L L Y M O U N T E D S W I T C H Q V E R T I C A L L Y M O U N T E D S W I T C H

R L O N G L I F E S W I T C H S W A T E R P R O O F S W I T C H I P 6 8

31

.5 (

1.2

4)

14(0.55)

31

(1

.22

)

16(0.63)

31

.5 (

1.2

4)

25 (0.985)

31.5 (1.24)

14

(0.5

5)

W aterproof and IP 68 ratedfor 10A at 250 VAC

C an be mounted eitherhorizontally or vertically

T he long life vers ion (106)is rated for 3A at 30 VDC

T his vers ion hasfunction s ymbolsand is rated for6A at 250 VAC

T his ve rs ion ha sfunction s ymbolsand is rated for 6Aat 250 VAC

E lectrical life = 10,000 operations E lectrical life = 10,000 operations

E lectrical life = 106 operationsif diode s uppres s ion is fittedacross the s olenoid

E lectrical life = 50,000 operations

HT 73 / B / 103 / 0308 / E Pag. 15


H A N D L E S P R OT E C T IV E B OOT S

R R O U N D P R O T E C T I O N B O O T

S S Q U A R E P R O T E C T I O N B O O T

S HOW ING G AITE R C OL L ARF OR S TANDAR D S TR AIG HTMOUNTING ADAP TE R

S HOW ING G AITE R C OL L AR F ORTILTE D MOUNTING ADAP T E R

S HOW ING G AITE R C OL L ARF OR S TANDAR D S TR AIG HTMOUNTING ADAP TE R

S HOW ING G AITE R C OL L AR F ORTILTE D MOUNTING ADAP T E R

ø16 (0.63)

3

(0.1

2)

79

.5 (

3.1

3)

ø20 (0.79)

ø16 (0.63)

3

(0.1

2)

79

.5 (

3.1

3)

ø20

(0.79)

86 (3.39)

5 (

0.2

0)9

2.4

(3

.64

)

ø40 (1.575)

3 (

0.1

2)

97 (3.82)

86 (3.39)

5 (

0.2

0)9

2.4

(3

.64

)

ø40 (1.575)

3 (

0.1

2)

97 (3.82)

HT 73 / B / 103 / 0308 / E Pag. 17


HPVL / SPVL SERIESHYDRAULIC PILOT CONTROL

Pag. 18 HT 73 / B / 103 / 0308 / E


H P V L / S P V L S E R I E S INT R ODUC T ION

L O A D E R T Y P E P I L O T C O N T R O L S

HP V L and S P V L P ilot C ontrol Valves are part

of the comprehensive range of our

Hydraulics product, and with the inclus ion of

electrical detents are des igned specifically for

W heeled Loader applications .

T he product is supported by an extens ive

range of control curve characteris tics and

handle options , and can be supplied to control

either two service or three service loader

applications .

Our engineers can offer specialis t support to

optimise this product to suit your application.

T he product is supported by a comprehensive

S ales and S ervice facility around the world.

B E N E F I T S

C ompact and light weight

All ports on bottom face for eas e of ins tallation

S tylis h good looks s uitable for modern cabs

Operator insulated from high temperaturecomponents

P roven, s imple pressure reducing elements

W ide range of low hys teres is , high accuracypressure control curves

W ide range of electrical options in both s tandardand multi-functional ergonomic handles

E lectrically releas able detents available asrequired

Low effort lever control

H P V L /S P V L S E R I E S MODE L C ODING

X P V L 1 X X X X X X X X XR e t u r n s pr in g

0 = S tandard: 1.4 to 2.8 daN

1 = Light: 3.0 to 4.5 daN

2 = Medium: 7.5 to 13.8 daN

G a it e r

R = R ound

S = S quare

H P V L = Hydraulic P ilot C ontrol

S P V L = Hydraulic P ilot C ontrol

E xample: ordering number: HP VL 1 06 S A 015 S 1model number: HP VL 1 06 S A 015 S 1 / 123456

(as s igned number)

1 = Design Mark

M e t e r in g c u r v e

see P C V C HAR AC T E R IS T IC S catalogue

H a n dl e t y pe

W = W ithout Handle

see HA NDL E S catalogue

B a s ic m o de l t y pe

0 4 = To control 2 s ervices

0 6 = To control 3 s ervices

HT 73 / B / 103 / 0308 / E Pag. 19


H P V L S E R I E S T E C HNIC AL DATA

H P V L 1 0 4 F o r c o n t r o l o f B o o m a n d B u c k e t

P OWE R DOWN

R A I S E

T IP

C I R C U I T D I A G R A M

C R OWD

U2

TP

U1 U3 U4

28

0.5

(1

1.0

4)

MAX 27o

2 F O R S E R V IC E SMAX 20o

1 F O R S E R V IC E

11

5 (

4.5

3)

75

(2

.95

)5

9 (

2.3

2)

14

.35

(0

.56

5)

FL

AN

GE

ø104.3 (4.11)

102 (4.02)

ø40 (1.575)

Amp s ealed connector hous ing, part number 174984-2and Double-lock plate, part number 174985-7 for cap

S H OWN WI T HR OU N D B OOT

F I T T E D

125 (4.9

2)

100 (3.94)

27 (1.06)F R O N T

U2

T

P

U1

U3

U4

27

(1

.06

)

42.7

(1.68)

85 (3.35)

ø5

4 (2

.13

)

45

(1

.77

)

87

.5 (

3.4

4)

4 holes ø7.0 throequis paced as s hownon 110 P C D

Pag. 20 HT 73 / B / 103 / 0308 / E


HPVL SERIES TECHNICAL DA TA

HPVL106 F or control of Boom, Bucket and Auxiliary

SHOWN WITH

SQUARE BOOT

FITTED

POWER DOWN FLOAT ( 1 )

RAISE (3)

TIP

CROWD (2)

AUXILIARY (5)

AUXILIARY (6)

TIP (4) FRONT

4 holes ø6.5 throequispaced as shown

on 108 PCD

27

(1.0

6)

42.7 (1.68)

85 (3.35)

54 (2

.13)

42.5

(1.6

7)

87.5

(3.4

4)

105 (

4.13

)

27 (1.06)FRONT

U4

T

P

U1

U3

U2

54 (2.13)

U5

U6

ø131 (5.16)

110 (

4.33

)

95 (3

.74)

80 (3

.15)

36.8

MAX 26 o

2 FOR SERVICESMAX 21 o

1 FOR SERVICE

25o

ø27 (1.06)

258 (

10.1

6)11

5.5 (

4.55

)

75.5

(2.9

7)57

(2.2

4)

5 (0.

20)

3 (0.

12) 12

3.8 (

4.87

)

112 (

4.41

)23

0 (9.

06)

ø40 (1.575)

AUXILIARYSERVICE26o

AUXILIARYSERVICE

26o

20 (0

.79)

CIRCUIT DIAGRAM

U6

TP

U1 U3 U2 U4 U5

HT 73 / B / 103 / 0308 / E Pag. 21


S P V L S E R I E S T E C HNIC AL DATA

S P V L 1 0 4 F o r c o n t r o l o f B o o m a n d B u c k e t

S H OWN WI T HR OU N D B OOT

F I T T E D

U2 U3

94 (3.70)

4 holes ø9.0 thro

F R O N T

T P

13

4 (

5.2

8)

U4 U19

4.4

(3

.72

)

52

(2

.05

)

26(1

.02

)

50 (1.97)

99.5 (3.92)

44 (1.73) 6 (0.24)6

B OOMB U C K E T

2 3

15o

P OWE R DOWNF L OAT

R A I S E

T IP

C R OWD

F R O N T4 1

2 3

21o

4 2

21o1

28

(5

.04

) 8 (

0.3

15

)

75

.5 (

2.9

7)

56

(2

.20

)

25

5 (

10

.04

)

F R O N T

50 (1.97) 23 (0.91)

4 holesø9.0 thro

96 (3.78)

11

8 (

4.6

5)

96

(3

.78

)1

1 (

0.4

3)

M O U N T I N G P A N E L D E T A I L S(TOP VIE W )


U4

TP

U1 U3 U2

Pag. 22 HT 73 / B / 103 / 0308 / E


S P V L S E R I E S T E C HNIC AL DATA

S P V L 1 0 6 F o r c o n t r o l o f B o o m , B u c k e t a n d A u x i l ia r y

S H OWN WI T HS QU A R E B OOT

F I T T E D

B OOMB U C K E T

2 3

15o

25o

6

ø27

(1.06)

U2 U3

144 (5.67)

6 holesø9.0 thro

F R O N T

T P

13

4 (

5.2

8)

U4 U19

4.4

(3

.72

)

52

(2

.05

)

26(1

.02

)

50 (1.97)

149.5 (5.89)

44 (1.73) 6 (0.24)6 (0.24)

50 (1.97)

U6

U5

F R O N T

50 (1.97)23 (0.91)

4 holesø9.0 thro

146 (5.75)

11

8 (

4.6

5)

96

(3

.78

)1

1 (

0.4

3)

100 (3.94)

M O U N T I N G P A N E L D E T A I L S(TOP VIE W )

21o

5 6

21o1

28

(5

.04

) 8 (

0.3

15

)

75

.5 (

2.9

7)

56

(2

.20

)

25

5 (

10

.04

)

21

0 (

8.2

7)


U6U1 U3 U2

TP

U4 U5

R A I S EC R OWDA U X I L I A R Y

P OWE R DOWNF L OAT

T IP

F R O N T5 4

2 36

1

A U X I L I A R Y

HT 73 / B / 102 / 0308 / E Pag. 23


23 to 51 cm3/rev (1.4 to 3.1 cu.in/rev)280 bar (4000 ps i) peak pressure

PRSVS / M SERIESSINGLE AND SECTIONALPILOT CONTROL VALVES

Pag. 24 HT 73 / B / 102 / 0308 / E


P R S V S S E R I E S INT R ODUC T ION

H Y D R A U L I C P I L O T C O N T R O L

P R S V P ilot C ontrol Valves are part of

the comprehensive range of our

Hydraulics product.

T his product, with its individual lever control,

supported by an extens ive range of control

curve characteris tics and a choice of handle

options , makes it suitable for a wide range of

both mobile and industrial applications .





B E N E F I T S


S ervice ports on bottom face with s upply andreturn ports on s ide faces for eas e of ins tallation

S imple to mount

C ompatible with a wide range of equipment

Operator is insulated from high temperaturecomponents


Wide range of low hys teres is , high accuracy,pressure control curves

R ange of electrical options within handle options


P R S V S S E R I E S MODE L C ODING

P R S V S X X X X X F X R e t u r n s pr in g




3 = Heavy: 10.0 to 19.0 daN

F = S tandard C ontrol P lunger

P R S V S = S ingle Unit Hydraulic P ilot Valve S eries S


see P C V C H A R AC T E R I S T I C S section

H a n dle t y pe

see H A N D L E S section

W = W ithout Handle

B a s ic m o de l n u m be r

O 1 = 2 s ervice ports with lever s pring returned into neutral

O 2 = 2 s ervice ports with lever detented in any pos ition

O 3 = 2 s ervice ports with lever detented in any pos ition andneutral pos ition sensor

O 4 = 2 s ervice ports with lever detented at both s troke ends

O 5 = 2 s ervice ports with lever detented in neutral pos ition

O 6 = 2 s ervice ports with lever detented in neutral pos itionand friction for detent in any pos ition

O 7 = 2 s ervice ports with lever detented at s troke end of U1s ide and s pring returned to neutral on U2 s ide

O 8 = 2 s ervice ports with lever detented at s troke end of U2s ide and s pring returned to neutral on U1 s ide

O 9 = 2 service ports with square mounting flange / rubberboot and multi-function ergonomic handle

HT 73 / B / 102 / 0308 / E Pag. 25


P R S V S S E R I E S T E C HNIC AL DATA

S I N G L E L E V E R P I L O T C O N T R O L V A L V E S T Y P E S

S ingle lever pivot control valves type S

are fitted with a protective rubber cover.

T hey can eas ily be modified from one model

to another s imply by replacing s ome of the

parts which are mounted on the lever

mechanism, ins ide the protective cover;

therefore installation dimensions are

common for any model.

T he following chart s hows a view of all the controlhandles and knobs which may be s upplied with thetype S control valve. F or details of each type s ee theHandles catalogue.

All models in the type S range can be fitted with amulti-function ergonomic handle. S ee next page.

type K Lcontrolhandles hown

T Y P E S A

95 (3.74)

110 (4.33)

36.8(1.49)

44

(1

.73

)

30

(1

.18

)

9 (

.35

5)

ø27 (1.06)

H Y D R A U L I C C I R C U I T D I A G R A M

PU1 T U2

ø14(.55)

ø27 (1.06)

4 (

0.1

6)

UN

LO

CK

ING

ST

RO

KE

26o 26o

70 (2.76)

80 (3.15)

3(0

.12

)

20

(0

.79

)

ø7

(0.2

75

)

35

(1

.38

)25

(0.9

85

)

81

.5 (

3.2

1)

11

2.5

(4

.43

)1

90

(7

.48

) fo

r h

an

dle

typ

e K

L (

as

dra

wn

)

T Y P E K B

U1 U2

P

T

T Y P E S D T Y P E S S

T Y P E K C T Y P E K J

T Y P E S X T Y P E S Y T Y P E S Z

T Y P E K K T Y P E K P T Y P E K W

plus type K L as s hown on main drawing

Pag. 26 HT 73 / B / 102 / 0308 / E


P R S V S S E R I E S T E C HNIC AL DATA

S I N G L E L E V E R P I L O T C O N T R O L V A L V E P R S V S 0 9

F or handle options available in the Multi-functionE rgonomic range, s ee the H a n dle s catalogue.

100 (3.94)

88 (3.46)

80 (3.15)

20

(0

.79

)

100 (3.94)

88 (3.46)

30

35

(1

.38

)2

5 (

0.9

85

)

11

2.5

(4

.43

)2

63

(1

0.3

5)

26o26o

T

P

100 (3.94)

88 (3.46)

70.7 (2.78)

80 (3.15)

10

0 (

3.9

4)

88

(3

.46

)

70

.7 (

2.7

8)

30

(1

.18

)

36.8

81 (3.19)

6 (0.24)

10 (0.39)

14.65 (0.24)

6 (

0.2

4)

14

.65

(0

.24

)

35

(1

.38

)

50

(1

.97

)

44

(1

.73

)3

4 (

1.3

4)

6.5

(0

.26

) x

4

U1 U2

E L E C T R I C C I R C U I T D I A G R A M

2 5 1 4 3 6 9 10


T

P

U1 U2

HT 73 / B / 102 / 0308 / E Pag. 27


PRSVM SERIES INTRODUCTION

HYDRAULIC PILOT CONTROL



Hydraulics product.



curve characteris tics and a choice of handle







BENEFITS

Compact and light weight

Service ports on bottom face with supply andreturn ports on side faces for ease of installation

Simple to mount

Compatible with a wide range of equipment


Proven, simple pressure reducing elements

Wide range of low hysteresis, high accuracy ,pressure control curves

Range of electrical options within handle options


PRSVM SERIES MODEL CODING

PRSVM XX X XX F X R eturn spring




3 = Heavy: 10.0 to 19.0 daN

F = S tandard Control Plunger

PRSVM = Sectional Hydraulic Pilot Valve Series M

Metering curve

see PCV CHARACTERISTICS section

Handle type

see HANDLES section

W = Without Handle

Basic model number

O1 = 2 service ports with lever spring returned into neutral

O2 = 2 service ports with lever detented in any position

O3 = 2 service ports with lever detented in any position andneutral position sensor

O4 = 2 service ports with lever detented at both stroke ends

O5 = 2 service ports with lever detented in neutral position

O6 = 2 service ports with lever detented in neutral positionand friction for detent in any position

O7 = 2 service ports with lever detented at stroke end of U1side and spring returned to neutral on U2 side

O8 = 2 service ports with lever detented at stroke end of U2side and spring returned to neutral on U1 side

Ordering key for multiple sectionsassembly of PRSVM series modulesas follows:

Settle the model number of eachindividual section, as shown on thecoding chart, starting from the inletsection (port P side) to the outletsection (port T side) and put them insequence.

For example: the complete modelnumber of a 2 sections assemblymade of M01 and M02 combination is:PRSVM01L001F0 + PRSVM02L015F0

Pag. 28 HT 73 / B / 102 / 0308 / E


P R S V M S E R I E S T E C HNIC AL DATA

SECTIONAL PILOT CONTROL VALVES TYPE M

S ectional pilot control valves type M

are particularly s uitable for thos e

applications where it is neces s ary to

reduce to a minimum ins tallation

dimensions , even when a relatively

high number of s ervices has to be

controlled. S ectional pilot control valves

type M are extremely flexible: a wide

range of control levers is available for

any model: s ingle units with as s embly

kit or multiple units fully as s embled

can be s upplied; eas y modification from

one model to another by replacing s ome

of the parts mounted on the lever

mechanism, within the rubber cover.

Type M control valves may be fitted with the followingknob types . F or details s ee the Handles catalogue.

PU1 T U2



95 (3.74)

110 (4.33)

44

(1

.73

)

30

(1

.18

) U1 U2

P

T

36.8(1.49)

9 (

.35

5)

ø27 (1.06)

ø14(.55)

ø27 (1.06)

4 (

0.1

6)

UN

LO

CK

ING

ST

RO

KE

26o 26o

80 (3.15)

20

(0

.79

)

11

2.5

(4

.43

)1

90

(7

.48

) fo

r h

an

dle

typ

e K

L (

as

dra

wn

)

ø22

(0

.87

)

3 (

0.1

2)

35

(1

.38

)25

(0.9

85

) ø22

(0

.87

)

T Y P E K B T Y P E K C T Y P E K J

plus type K L as s hown on main drawing

HT 73 / B / 102 / 0308 / E Pag. 29


P R S V M S E R I E S T E C HNIC AL DATA

S E C T I O N A L P I L O T C O N T R O L V A L V E S T Y P E M

44.5 (1.75)

U1

U2

U3

U4

U5

U6

95

(3

.74

)

11

0 (

4.3

3)

36

.8(1

.49

)

9 (0.355)

4 (

0.1

6)

UN

LO

CK

ING

ST

RO

KE

19

4 (

7.6

4)

44.5 (1.75)

35

(1

.38

)25

(0.9

85

)

30

6.5

(1

2.0

7)

* 44.5 (1.75) * 44.5 (1.75)

119 (4.69)

131 (5.16


ø27 (1.06)

26o 26o

80 (3.15)

20

(0

.79

)1

12

.5 (

4.4

3)

3 (

0.1

2)

ø14

(0.55)

P

T

P

U1

T

U2


U3 U4 U5 U6

* S pecial centre-line dis tances of 60mm and 80mmare also available.

Angled levers are available to customer's specificationsas are levers of varying heights .

F or details pleas e contact our Technical Department.

HT 73 / B / 102 / 0308 / E Pag. 31


CPVL SERIESHYDRAULIC PILOT CONTROLS

Pag. 32 HT 73 / B / 102 / 0308 / E


FEATURES:

- Aluminium body for light weight execution

- Auxiliary function integrated in a single body

- Wide range of metering curve

- Magnetic (12 or 24 VDC) or mechanical detent with prefeel ramps

- Optional linkage between main and auxiliary function

- Rubber boot protection

ATTRIBUTES:

Input pressure: Min. 25 bar – Max. 50 bar

Back pressure: 3 bar Max. at T port

Hysteresis: +/- 0,5 bar Max.

Flow: Min. 5 l/min – Max. 25 l/min

Leakage: Max. 20 cc/min @ 22 mm2/sec and 30 bar supply pressure

Fluid temperature: -20° to +80 °C

Fluids: Mineral oils HM and HV

Fluid cleanliness: 21/16/13 to ISO 4406:1999

CPVL SERIES INTRODUCTION

HT 73 / B / 102 / 0308 / E Pag. 33


C IR C UIT DIAG R AM

T

U3 U2 U4 U6 U5

P

U1

25°

69=°=

NAME PLATE

35

25°

VIEWFROM A

131

=°=

119

=°=

81 =°=

119=°=131=°=

44 =°=

9,517

2222 44

12Ø

(4 P

os.)

7( 4

Pos. )

U2U1

U3

U4U6U5

2 5°

Max.for 1 service

30° Max. for 2 services

100=°=

6117

7335

97

49

135

10Ø

21Ø

12°

98,1

370

PT

POWERDOWNFLOAT

(1)

AUXILIARY(6)

TIP(4)

CROWD(2)

RAISE(3)

AUXILIARY(5)

A

CPVL SERIES OVERALL DIMENSIONS

Pag. 34 HT 73 / B / 102 / 0308 / E


CPVL106

W = Without handleS= Straight handle (see handle catalogue)E=Ergonomic handle (see MFE catalogue)

Metering curve no on port 4(see catalogue)




E = Electric detent on port 4M = Mechanical detent on port 4X = No detent







Knob type on auxiliary(see knob catalogue)

B = ¼” BSP Ports (Standard option)M = Metric M14x1.5 PortsS = 7/16”-18 UNF SAE Po rts

1 = 12 VDC Magnets2 = 24 VDC Magnets

W = Without linkageL = With linkageE = Electric detent on port 6M = Mechanical detent on port 6X = No detent

E 1 2 3 4 X X X X K 5 6 XX X X X

CPVL SERIES ORDERING KEY

HT 73 / B / 102 / 0308 / E Pag. 35


PRSVB / L SERIESONE OR TWO LEVER OPERATED

PILOT CONTROL VALVES

Pag. 36 HT 73 / B / 102 / 0308 / E


P R S V B / L S E R I E S INT R ODUC T ION

P R S V B / L S E R I E S MODE L C ODING

P R S V X X X X X X X F X X X

R e t u r n s pr in g




3 = Heavy: 10.0 to 19.0 daN

F = S tandard C ontrol P lunger

P R S V = Hydraulic P ilot Valve S eries

M e t e r in g c u r ve

see P C V C H A R AC T E R I S T I C S section

H a n dl e t y pe

W = W ithout Handle

K P = R ound Knob (standard)

s ee H A N D L E S section for other options


Double lever S ingle lever

B O 1 L O 1

B O 2 L O 2

B O 3 L O 3

B O 4 L O 4

B O 5 L O 5

B O 6 L O 6




Hydraulics product.



curve characteris tics makes it suitable for a

wide range of applications .





B E N E F I T S


All ports on bottom face for eas e of ins tallation

S imple to mount

C ompatible with a wide range of product




Low effort lever control with spring centredand detented vers ions available

S h u t t le blo c k *

S 1 = To s uit s ingle lever model

S 3 = To suit double lever model

* omit if no s huttleblock is required*

see pages3 and 4

see pages5 and 6

HT 73 / B / 102 / 0308 / E Pag. 37


B O 1 P I L O T O P E R AT E D C O N T R O L

2 s ide levers with return s pring

P R S V B S E R I E S T E C HNIC AL DATA


2 s ide levers with mechanical detent


2 s ide levers with detent in any pos ition


2 s ide levers with detent in any pos ition + neutral pos ition s ens or

32

3 (

12

.72

)

109 (4.29)

ø12 (0.47)

61 (2.40)1

2 (

0.4

7)

90

.5 (

3.5

6)

95

(3

.74

)

41

.5

(1.6

3)

ø7 (0.275)

7 (

0.2

75

)

10

7 (

4.2

1)

34o

32

3 (

12

.72

)

109 (4.29)

ø12 (0.47)

61 (2.40)

12

(0

.47

)

90

.5 (

3.5

6)

95

(3

.74

)

41

.5

(1.6

3)

ø7 (0.275)

7 (

0.2

75

)

34o

10

0 (

3.9

4)

32

3 (

12

.72

)

109 (4.29)

ø12 (0.47)

61 (2.40)

12

(0

.47

)

90

.5 (

3.5

6)

95

(3

.74

)

41

.5

(1.6

3)

ø7 (0.275)

7 (

0.2

75

)

34o

13

1 (

5.1

6)

32

3 (

12

.72

)

109 (4.29)

ø12 (0.47)

61 (2.40)

12

(0

.47

)

90

.5 (

3.5

6)

95

(3

.74

)

41

.5

(1.6

3)

ø7 (0.275)

7 (

0.2

75

)

34o

Pag. 38 HT 73 / B / 102 / 0308 / E



2 s ide levers with detent in res t

P R S V B S E R I E S T E C HNIC AL DATA

T Y P I C A L R A N G E O F L E V E R M OV E M E N T

P R S V B S E R I E S T Y P IC AL T E C HNIC AL DATA

T Y P I C A L P O R T A R R A N G E M E N T

T Y P I C A L I N S T A L L AT I O N D I M E N S I O N S

T Y P I C A L H Y D R A U L I C C I R C U I T D I A G R A M

B O 6 P I L O T O P E R A T E D C O N T R O L

2 s ide levers with detent in res t and clutch in any pos ition

31

9 (

12

.56

)

112 (4.41)

ø12 (0.47)

134 (5.275)

12

(0

.47

)

90

(3

.54

)9

5 (

3.7

4)

38

(1.5

0)

ø7 (0.275)

7 (

0.2

75

)

31

9 (

12

.56

)

112 (4.41)

ø12 (0.47)

134 (5.275)

12

(0

.47

)

90

(3

.54

)9

5 (

3.7

4)

38

(1.5

0)

ø7 (0.275)

7 (

0.2

75

)

10

0 (

3.9

4)

ø10

8 M

AX

(4.2

5)

ø1

04

(4.0

9)

ø1

00

MIN

(3

.94

)

ø8

5 (3

.35

)

ø6

.5 (

0.2

56

)

45o

U1 U2 U3 U4

T

P

U1

U2

U4

U3

T

P

ø104 (4.09)

11

(0

.43

) 7 (0.275)R 3. 5

ø123 (4.84)

ø5

2 (2

.05

)

40

(1.5

75

)

171 (6.73)

ø45 (1.77)

30o 30o

UN

LO

CK

ING

ST

RO

KE

3 (

0.1

2)

BO

1,

BO

2 O

NLY

HT 73 / B / 102 / 0308 / E Pag. 39


P I L O T O P E R A T E D C O N T R O L

single s ide lever with detent in any pos ition + neutral pos ition sensor

L O 1 P I L O T O P E R AT E D C O N T R O L

s ingle s ide lever with return s pring

P R S V L S E R I E S T E C HNIC AL DATA


single s ide lever with mechanical detent


s ingle s ide lever with detent in any pos ition


32

3 (

12

.72

)

54.5 (2.15)

ø12 (0.47)

53 (2.09)1

2 (

0.4

7)

90

.5 (

3.5

6)

95

(3

.74

)

41

.5

(1.6

3)

ø7 (0.275)

7 (

0.2

75

)

10

7 (

4.2

1)

10

0 (

3.9

4)

13

1 (

5.1

6)

32

3 (

12

.72

)

54.5 (2.15)

ø12 (0.47)

53 (2.09)

12

(0

.47

)

90

.5 (

3.5

6)

95

(3

.74

)

41

.5

(1.6

3)

ø7 (0.275)

7 (

0.2

75

)

32

3 (

12

.72

)

54.5 (2.15)

ø12 (0.47)

53 (2.09)

12

(0

.47

)

90

.5 (

3.5

6)

95

(3

.74

)

41

.5

(1.6

3)

ø7 (0.275)

7 (

0.2

75

)

32

3 (

12

.72

)

54.5 (2.15)

ø12 (0.47)

53 (2.09)

12

(0

.47

)

90

.5 (

3.5

6)

95

(3

.74

)

41

.5

(1.6

3)

ø7 (0.275)

7 (

0.2

75

)

Pag. 40 HT 73 / B / 102 / 0308 / E



s ingle s ide lever with detent in res t

P R S V L S E R I E S T E C HNIC AL DATA

L O 6 P I L O T O P E R A T E D C O N T R O L

s ingle s ide lever with detent in res t and clutch in any pos ition

31

9 (

12

.56

)

67 (2.64)

ø12 (0.47)

12

(0

.47

)

90

(3

.54

)9

5 (

3.7

4)

38

(1.5

0)

ø7 (0.275)

7 (

0.2

75

)

10

0 (

3.9

4)

56 (2.20)

31

9 (

12

.56

)

67 (2.64)

ø12 (0.47)

12

(0

.47

)

90

(3

.54

)9

5 (

3.7

4)

38

(1.5

0)

ø7 (0.275)

7 (

0.2

75

)

56 (2.20)

T Y P I C A L R A N G E O F L E V E R M OV E M E N T

P R S V L S E R I E S T Y P IC AL T E C HNIC AL DATA

T Y P I C A L P O R T A R R A N G E M E N T

T Y P I C A L I N S T A L L AT I O N D I M E N S I O N S

T Y P I C A L H Y D R A U L I C C I R C U I T D I A G R A M

ø10

8 M

AX

(4.2

5)

ø1

04

(4.0

9)

ø1

00

MIN

(3

.94

)

ø8

5 (3

.35

)

ø6

.5 (

0.2

56

)

45o

U1 U2

T

P

U1

U2

T

P

ø104 (4.09)

11

(0

.43

) 7 (0.275)R 3. 5

ø123 (4.84)

ø5

2 (2

.05

)

40

(1.5

75

)

171 (6.73)

ø45 (1.77)

30o 30o

UN

LO

CK

ING

ST

RO

KE

3 (

0.1

2)

LO

1,

LO

2 O

NLY

HT 73 / B / 102 / 0308 / E Pag. 41


P R S V B /L S E R I E S S HUT T LE B LOC K T E C HNIC AL DATA

S 1 S H U T T L E B L O C K S 3 S H U T T L E B L O C K

H Y D R A U L I C C I R C U I T D I A G R A MU1 U2

U3

TP

90 (3.54)

45o


U1 U2 TP

U1 U2

U5

TP

U1 U2 P

U3 U4

U6U3 U4T

63 (2.48)5

2 (

2.0

5)

1/4

" B

SP

(2

po

s.)

40

(1

.57

)3

4 (

1.3

4)

88

(3

.46

)

46

(1

.81

)

11

(0

.43

)

91

(3

.58

)

35 (1.38)

38 (1.50)

45o

8 (

2 p

os.

)

90 (3.54)

63 (2.48)

52

(2

.05

)

1/4

" B

SP

(2

po

s.)

40

(1

.57

)3

4 (

1.3

4)

88

(3

.46

)

46

(1

.81

)

11

(0

.43

)

91

(3

.58

)

35 (1.38)

8 (

2 p

os.

)

U1

U2

T

P U3

U4

U3

T

P U6

U1

U2

U5

HT 73 / B / 102 / 0308 / E Pag. 43


HPV SERIESHYDRAULIC PILOT CONTROLS

Pag. 44 HT 73 / B / 102 / 0308 / E


HPV SERIES INTRODUCTION

HYDRAULIC PILOT CONTROL

HP V P ilot C ontrol Valves are part of


Hydraulics product.

T he product, with its s ingle lever dual axis

control, and supported by an extens ive range

of control curve characteristics and handle







BENEFITS

Compact and light weight

All ports on bottom face for ease of installation

Suitable for arm rest of console mounting

Compatible with a wide range of product

S tylish good looks suit able for modern cabs


Proven, simple pressure reducing elements

Wide range of low hysteresis, high accuracy ,pressure control curves

Wide range of electrical options in both standardand multi-functional ergonomic handles


HPV SERIES MODEL CODING

HPV 1 CO1 X XXX X XR eturn spring




Gaiter

R = Round

S = Square

HPV = Hydraulic Pilot Control

Example : ordering number : HPV 1 C01 W 015 S 1model number : HPV 1 C01 W 015 S 1 / 123456

(assigned number)

1 = Design Mark

Metering curve

see PCV CHARACTERISTICS section

Handle type

W = Without Handle

see HANDLES section

Basic model type

CO1 see page 3

HT 73 / B / 102 / 0308 / E Pag. 45


H P V S E R I E S T E C HNIC AL DATA

CO1 w it h S Q U A R E g a it e r CO1 w it h R O U N D g a it e r

T Y P I C A LC I R C U I T D I A G R A M

T Y P I C A LF U N C T I O N A L D I A G R A M(V I E W F R O M 'B ' )

2/1 2/1

2/1 2/1

1

3

2 4

U1 U2 U3 U4

T

P

V I E WF R O M 'A '

ø1

00

(3.9

4)

ø5

2 (

2.0

5)

37(1.46)

ø125 (4.92)

102 (4.02)

U1

U2 U3

U4

T

P

'A '

'B '

30

6 (

12

.05

)

75

(2

.95

)2

31

(9

.09

)

29

.5 (

1.1

6)

ø39.5 (1.56)

Max for 1 s ervice21o

Ma x for 2 s ervices27o

M O U N T I N GD E T A I L S

ø1

00

(3.9

4)

ø8

5 (2

.95

)

ø6

.5 (

0.2

55

)

45o

'A '

'B '

30

6 (

12

.05

)

75

(2

.95

)2

31

(9

.09

)

29

.5 (

1.1

6)

ø39.5 (1.56)

Max for 1 s ervice21o

Ma x for 2 s ervices27o

V I E WF R O M 'A '

ø5

2 (2

.05

)

37 (1.46)

ø131 (5.16)

U1

U2 U3

U4T

P

M O U N T I N GD E T A I L S

ø1

00

MIN

(3

.94

)

ø8

5 (2

.95

)

ø6

.5 (

0.2

55

)

45o

ø10

8 M

AX

(4.2

5)

ø1

04

(4.0

9)

HT 73 / B / 102 / 0308 / E Pag. 47


PRSVP SERIESFOOT PEDALS

Pag. 48 HT 73 / B / 102 / 0308 / E


P R S V P S E R I E S INT R ODUC T ION

P R S V P S E R I E S MODE L C ODING

P R S V P X X X X X X X X X R e t u r n s pr in g



3 = Heavy: 10.0 to 19.0 daN

P R S V P = Hydraulic P ilot Valve S eries P


see P C V C H A R A C T E R I S T I C S section


O 1 = R ocker pedal with 2 pilot s pools

0 2 = Twin pedal with 2 pilot s pools

0 3 = S ingle pedal with 1 pilot s pool




Hydraulics product.

T his product, with its range of foot pedal

controls , supported by an extens ive range

of control curve characteris tics and a choice

of handle options , makes it suitable for a wide

range of applications .





B E N E F I T S


P orts ideally pos itioned for eas e of ins tallation

S imple to mount

C ompatible with a wide range of product




R ange of operator pedal efforts available

R ubber boot protection to prevent ingress ofairborne contaminant

R ubber boot suitable for a wide range ofenvironmental conditions

P lunger manufactured from non-corrosive steel

E nd of s troke limited externally to prevent anydamage to internal components

Double lip seal option available for increasedproduct life

Optimised angular movement of foot pedal

P lu n ge r S e a l a n dR u bbe r B o o t O pt io n s see page 47

S W = s tandard s eal without rubber boot

S G = s tandard s eal with type G rubber boot(option not available for P R S VP 03)

S K = s tandard s eal with type K rubber boot(option not available for P R S VP 01)

L W = double lip longlife s eal without rubber boot

L K = double lip longlife s eal with rubber boot type K(option not available for P R S VP 01)

P e da l T y pe

W = W ithout pedal

S = F lat s tandard pedal

V = V s haped pedal (available only for P R S V P 01)

HT 73 / B / 102 / 0308 / E Pag. 49


P R S V P S E R I E S T E C HNIC AL DATA

9(0.35) 18 (0.71)

80(3.15)

160(6.30)

180(7.09)

20

(0.7

9)

40

(1.5

75

)

U2U1

P

TU2

U1P

T

130(5.12)

55(2.17)

82(3.23)

260(10.24)

70(2.76)

270

20

0(7

.87

5)

10

(0.3

9)

15

7.5

(6.2

0)

8

(.3

15

)

31

(1.2

2)

10

4.5

(4.1

15

)

66

(2.6

0)

70

(2.7

6)

U2U1P

T

44

.5(1

.75

) ø1

2(0

.47

)

60(2.36)

52.5(2.07)

39.5(1.56)

9(0.35) 18 (0.71)

80(3.15)

160(6.30)

180(7.09)

20

(0.7

9)

40

(1.5

75

)

55(2.17)

130(5.12)

8

(.3

15

)

31

(1.2

2)

10

4.5

(4.1

15

)

20

(0.7

9)

82(3.23)

282(11.10)

66

(2.6

0)

70

(2.7

6)

9(0.35) 18 (0.71)

80(3.15)

160(6.30)

20

(0.7

9)

40

(1.5

75

)

21

.55

(0.8

5)

8

(0.3

15

)

10

4.5

(4.1

15

)

55(2.17)

9

.5(0

.37

5)

31

(1.2

2)

55

(2.1

7)

80(3.15)

160(6.30)

24

(0.9

5)

T y pic a l H y dr a u l ic C i r c u it D ia gr a mfor all foot pedals illus trated on this page

T y pic a l T e c hnic a l D a t afor all foot pedals illus trated on this page

S ervice ports : P, T, U1, U2; 1/4" B S P

Maximum inlet pres s ure * : P ort P - 50 bar

Maximum back pres s ure : P ort T - 3 bar

S upply flow range : from 5 up to 20 litres /minute

Maximum Hys teres is : +/- 0.5 bar

Fluid : Mineral Oils IS O, HM and HV

C ontamination clas s : 16/11 IS O 4406

F luid temperature range : from -20 up to +80oC

* Higher inlet pres s ures may be pos s ible.Als o s ide porting is available.F or both requirements , pleas e cons ult yourHansa-Tmp s.r.l. repres entative.

U1 U2P T

f la t s t a n da r d r o c k e r pe da l V s h a pe d r o c k e r pe da l

P R S V P 0 1 W r o c k e r m o de l w it h o u t pe da l

P R S V P 0 1 S P R S V P 0 1 V

Pag. 50 HT 73 / B / 102 / 0308 / E

Hydraulic Pilot Control ValvesP R S V P S E R I E S T E C HNIC AL DATA

60(2.36)

222(8.74)

12

0(4

.73

)

16

0(6

.30

)

63

(2.4

8)

17

4(6

.85

) 79

(3.1

1)

47

(1.8

5)

ø1

23

(4.8

4)

ø1

04

(4.0

9)

ø8

5(3

.35

)

ø5

2(2

.05

)1

1(0

.43

)

7(0.28)

U2

U1

P T

57(2.24)

25

(0.9

85

)

48

(1.8

9)

U

P

T

7o14'

30(1.18)

183(7.20)

45

(1.7

7)

60

(2.3

6)

46

(1.8

1)

60(2.36)

3o2

0(0

.79

)1

12

.5(4

.43

)

15

4(6

.06

)

ø10(0.39) (4 positions)

45

.5

(1.7

9)

25

(0.9

85

)

U1 U2P T

H y dr a u l ic C i r c u it D ia gr a m H y dr a u l ic C i r c u it D ia gr a m

U P T

T e c hnic a l D a t a

S ervice ports : P, T, U1, U2; 1/4" B S P








T e c hnic a l D a t a

S ervice ports : P, T, U; 1/4" B S P








T w in pe da lP R S V P 0 2 S o n e pi lo t s po o l w it h pe da lP R S V P 0 3 S

* Higher inlet pres s ures may be pos s ible, pleas e cons ult our T echnical Department.

HT 73 / B / 102 / 0308 / E Pag. 51


L K S e a l t y pe L / B o o t t y pe KL W S e a l ty pe L / N O B o o t ( W )

S K S e a l t y pe S / B o o t t y pe KS G S e a l t y pe S / B o o t t y pe G

P R S V P S E R I E S P LUNG E R AND B OOT T Y P E S

S W S e a l ty pe S / N O B o o t ( W )

HT 73 / B / 102 / 0308 / E Pag. 53


SUH SERIESPILOT SUPPLY UNITS

Pag. 54 HT 73 / B / 102 / 0308 / E


S U H S E R I E S INT R ODUC T ION

P I L O T S U P P L Y U N I T S

T he S UH is a direct acting pressure

reducing valve which can be connected

to either one or two main circuits via

ports P 1 and P 2. B oth ports feed

through a shuttle valve to prevent circuit

interaction. R educed pressure is

supplied to port P 1 and P 2.

A pre-set relief valve is fitted to prevent

over pressure, and the unit is supplied

with an accumulator connection for

emergency power supply. An solenoid

attachment is available to act as a safety

system and to maintain the accumulator

charge for a longer period by preventing

leakage downstream from the ‘U’ ports .

Also a vers ion is available with integral

filter to protect the output line and hence

downstream components .

B E N E F I T S

C ompact unitOptional accumulator for peak and emergency powerOptional 2 way & 3 way, 12 or 24 V DC s olenoid valvesfor s afety and extended accumulator s torage timeDual ports for maximum ins tallation flexibility

T E C H N I C A L F E AT U R E S

Input pressure P : Min 8 bar, Max 350 barOutput pressure (nominal) : 30 barMax pres s ure on drain port T : 3 barR elief valve setting (nominal) : 45 barMax accumulator pressure : 210 bar (Nitrogen pre-charge 13 bar)F low capacity at ports S : 5 l/min without accumulator

: up to 40 l/min with accumulator

Hydraulic fluids : IS O HM & HV bio-degradeable fluidsF luid temperature range : -20 to +80oCF luid vis cos ity : 2.8 to 380 mm2/s ec

Maximum filter rating : 25μm (absolute)

S U H S E R I E S MODE L C ODING

S U H X X X - X X X X X X X

Des cription W eight (kg)

B AS IC S UH VALVE 2.36

0.35 LITR E AC C UMULATOR 3.00



2 W AY S E LE C TOR 0.50

3 W AY S E LE C TOR 0.70

A c c u m u la t o r s iz e s

0 0 0 = No accumulator

0 3 5 = 0.35 litre accumulator



A c c u m u la t o r o pt io n s

L = with accumulator

W = without accumulator

P = with provis ion for accumulator

C o n t r o l o pt io n s

A 0 0 = standard valve

A 2 2 = with 2 way s elector 12 V DC s olenoid




P r e s s u r e s e t t in g

0 2 5 = 25 bar

0 3 0 = 30 bar

0 3 5 = 35 bar

S U H = S upply unit - hydraulic

E xample:S tandard valve s et at 30 bar, with 12 Volts olenoid valve and 0.35 litre accumulatorordering number:S UH 030 A 22 L 035model number:S UH 030 A 22 L 035 / 123456

(as s igned number)

0 4 0 = 40 bar

0 5 0 = 50 bar

HT 73 / B / 102 / 0308 / E Pag. 55


S U H S E R I E S T E C HNIC AL DATA

70(2.76)

53

.5(2

.11

)

38

.5(1

.52

)

90(3.54)

134.8(5.31)

17

(.6

7)

37

(1.4

6)

14

(.5

5)

25.5(1)

M8X1.25

35(1.38)

U1

P1

T1

19

(.7

5)

51

(2.0

1)

82

(3.2

3)

64.5(2.54)

P2

U2 T2

10(.39)

53

(2.0

9)

P1

U1 T1

P2 U2T2

P1 U1T1

2 5BAR

4 5BAR


P2 U2T2

P1 U1T1

2 5BAR

4 5BAR


53

.5(2

.11

)

38

.5(1

.52

)

P2

U2 T2

P1

U1 T1

70(2.76)

90(3.54)

134.8(5.31)

17

(.6

7)

37

(1.4

6)

14

(.5

5)

25.5(1)

M8X1.25

35(1.38)

U1

P1

T1

19

(.7

5)

51

(2.0

1)

82

(3.2

3)

64.5(2.54)

10(.39)

53

(2.0

9)

64

(2.5

2)

S U H -x x x -A 0 0 -W -0 0 0 s tandard valve with no ac c umulator and no provis ion for an ac c umulator

S U H -x x x -A 0 0 -P -0 0 0 s tandard valve with no ac c umulator and with provis ion for an ac c umulator

Pag. 56 HT 73 / B / 102 / 0308 / E


S U H S E R I E S T E C HNIC AL DATA

P2 U2T2

P1 U1T1

T Y P I C A L C I R C U I T D I A G R A M

P2 U2T2

P1 U1T1

S U H -x x x -A 0 0 -L -x x x s tandard valve with ac c umulator / with no s olenoid

A

B

C

15 (0.59)

AAccumulator

Length

162 (6.38)

200 (7.87)

295 (11.61)

BOverall Unit

Length

302 (11.89)

340 (13.39)

435 (17.13)

CMaximumDiameter

99 (3.90)

115 (4.53)

115 (4.53)

AccumulatorC apacity

0.35 litres

0.75 litres

1.50 litres

S UH-xxx-A00-L -035

S UH-xxx-A00-L -075

S UH-xxx-A00-L -150

S T A N DA R D V A L V EF or dimens ions s ee page 3

S U H -x x x -A 2 2 -L -x x x

valve with ac c umulator and 12V DC 2-way s olenoid


F or dimens ions includingaccumulators s ee above

S T A N DA R DV A L V EF or dimens ionss ee page 3

11 (0.43)

48.5 (1.91)

115 (4.53)

S U H -x x x -A 2 4 -L -x x x

valve with ac c umulator and 24V DC 3-way s olenoid

F or dimens ions includingaccumulators s ee above

10

4 (

4.0

9)

16

4 (

6.4

6)

37

(1

.46

)

P2

U

P1 TT1


S T A N DA R DV A L V EF or dimens ionss ee page 3

11

4 (

4.4

9)

17

4 (

6.8

5)

5 (0.20)

60 (2.36)

120 (4.72)

60

(2

.36

)

P1T1

T2P2

U1

U2

P1

U1

T1

P1T1

P2

T

U

P1

U

T1

T

HT 73 / B / 102 / 0308 / E Pag. 57


S U H S E R I E S F ILT E R T E C HNIC AL DATA

S U H w it h in le t l in e f i l t e r

70 (2.76)10 (0.39)

2 mounting holesM8 x 1.25 x 14.0 deep

135 (5.31)

60 (2.36)

38.5 (1.52)5.6 (0.22)

25.5

(1.00)64.5 (2.54)

100 (3.94)

19

(0

.75

)

13

5 (

5.3

1)

12

4 (

4.8

8)

12

2 (

4.8

0)

33

(1

.30

)5

8 (

2.2

8)

10

8 (

4.2

5)

98.8 (3.89)

33 (1.30)

R emoval

48 (1.89) 38.5 (1.52)

7.5 (0.30)

15

3 (

6.0

2)

F ilter Unit


P UT

3 0BAR

4 5BAR

25μm F IL T E R

T his vers ion of the S UH has an integral

filter fitted to the inlet line of the valve to

provide complete protection to both the

pilot supply unit and any downstream

services from contamination. T he filter

element is rated at 25μm absolute and

is replaceable.

To model code this unit, add the code /F

onto the end of the standard model code

as shown on page 50.

P

U T

HT 73 / B / 102 / 0308 / E Pag. 59


PILOT CONTROL VALVESCHARACTERISTICS

Pag. 60 HT 73 / B / 102 / 0308 / E


PCV CHARACTERISTICS INTRODUCTION

METERED CURVES

T hese characteris tics are compatible

with HPV , HPVL , SPVL , and the entire

PRSV range of product. F or optimum

control it is important to select the correct

characteris tic to suit the application and

our T echnical Department are

always pleased to ass is t in this process .

T here is a comprehensive worldwide S ales

and S ervice facility around the world.

BENEFITS

High precision components

Low hysteresis

Excellent repeatability

Wide range of options

Suitable for a wide range of product

Virtually no service work required

Can be engineered to suit your particular application

HT 73 / B / 102 / 0308 / E Pag. 61


P I L O T C O N T R O L V A L V E ME TE R ING C UR VE S

L I N E A R C H A R A C T E R I S T I C S W I T H O U T S T E P

pre s s ure

plu n g e r s t r o k e

A

B

C D

Output P lunger MeteringP res s ure (bar) S troke (mm) C urve Number

A B C D

0.0 40.4 0.9 9.5 061

0.0 68.6 2.0 9.5 022

0.0 123.2 2.0 9.5 033

0.5 13.0 1.8 9.5 087

0.7 31.8 1.0 9.5 071

1.4 12.1 1.0 9.5 072

1.5 9.5 1.0 9.5 086

1.5 41.9 0.9 9.5 093

2.0 8.4 2.0 9.5 004

2.0 15.8 0.9 9.5 060

2.0 55.7 1.0 9.5 092

3.0 24.2 0.9 9.5 058

3.2 19.0 1.0 9.5 053

3.2 20.9 0.0 9.5 096

3.8 24.9 0.9 9.5 074

4.0 10.4 2.0 9.5 005

4.7 27.6 0.8 9.5 132

5.0 18.9 2.0 9.5 079

5.0 20.8 0.9 9.5 094

5.0 20.9 1.0 9.5 089

5.5 26.7 0.9 9.5 075

5.8 24.2 1.6 9.5 035

5.8 24.1 0.9 9.5 036

5.8 24.2 1.8 9.5 037

5.8 30.0 0.8 9.5 133

Output P lunger MeteringP res s ure (bar) S troke (mm) C urve Number

A B C D

6.0 31.7 2.0 9.5 001

6.0 41.1 1.0 9.5 040

6.0 42.1 0.9 9.5 046

8.0 15.5 2.0 9.5 056

8.1 21.1 3.3 9.5 105

8.6 26.9 0.9 9.5 039

9.1 27.9 0.9 9.5 003

Pag. 62 HT 73 / B / 102 / 0308 / E


PRESSURE( BAR )

STROKE( mm )

ID NUMBER

A B C D

6 22,5 2 6,5 CR002

6 25 2 7,2 CR006

6 21,7 2 6,3 CR007

6 16,3 1,6 7,1 CR008

0,5 4 1,8 8,4 CR009

0,5 6,5 2 8,5 CR010

1 8 1 8,5 CR011

2 11,5 1 8,5 CR012

8,2 24,4 1,8 8,5 CR013

8,2 24,5 1 8,5 CR014

5,8 22 1,8 8,5 CR015

5,8 19 1,8 7,3 CR016

5,8 19 0,9 6,4 CR017

4,9 18,9 1 8,5 CR018

5 14,5 1 8,5 CR019

6,5 14 1 8,5 CR020

3 9 2 8,5 CR021

5 12 1 8,5 CR023

8 24,2 0,9 8,5 CR024

2 11,5 2 8,5 CR025

5,03 15,93 1 8,5 CR026

0 13 0,5 8,5 CR027

5,5 24,2 0,9 8,5 CR028

5,8 19 1,6 7,1 CR029

3,4 29,4 1 8,5 CR030

14 29 1 8,5 CR031

9,8 26 1,8 8,5 CR032

1 12,0 1 8,5 CR034

5 21 1,2 6,5 CR038

3,25 15,4 1 8,5 CR041

2 8 0,5 6,5 CR042

6,6 20,7 1 8,5 CR043

8 20,7 1,8 8,5 CR044

2 13 1 8,5 CR045

0,5 11,4 1,8 8,5 CR047

3,2 11,7 1,8 8,5 CR048

4,3 15,2 1 8,5 CR049

PILO T CONTROL VALVE METERING CUR VES

LINEAR CHARACTERISTICS WITH STEP

pressure

plunger stroke

A

B

C DSORTED BY ID NUMBER

HT 73 / B / 102 / 0308 / E Pag. 63


PRESSURE( BAR )

STROKE( mm )

ID NUMBER

A B C D

6 17,4 1 7,1 CR050

3 10 1 8,5 CR051

3,2 17,2 1 8,5 CR062

6.5 28 1 8,5 CR063

5,9 12,9 1 8,5 CR065

1,5 8,5 1 8,5 CR069

3 10 1 8,5 CR070

8,4 50 1 8,5 CR073

0,5 18,4 1 8,5 CR076

2 20,5 0,9 8,5 CR077

2.4 16.4 1 8,5 CR078

2 27,5 1 8,5 CR080

7 21 1.5 7.1 CR081

5,8 22,4 0,9 8,5 CR082

9 15,5 2 8,5 CR084

5,8 22 0,9 8,5 CR088

4 21,5 0,9 8,5 CR090

4,5 18 0,9 8,5 CR095

0,8 29 1,4 3,5 CR097

8,4 21,1 3,25 8,5 CR098

5 21,5 1,8 7,3 CR099

7,2 15,3 1 8,9 CR100

3,5 13 1 8,5 CR101

3,73 29,23 1 8,5 CR104

5,8 19,8 1 8,5 CR106

4,44 17 1,8 8,5 CR107

4,5 27 1 8,5 CR108

5 24.5 1.8 8.5 CR109

5,15 19,1 1,2 8,5 CR112

5,8 26 1 8,5 CR115

5 23 1 8,5 CR116

4,9 17,5 1 8 CR117

8,4 27,9 1,8 8,5 CR120

3,04 21,74 0,9 8,5 CR121

4,3 13,8 1 8,5 CR122

2,76 14,91 1 8,5 CR123

3 8 1 8,5 CR125

6,7 16,2 1 8,5 CR127

2,8 4,75 1 8,25 CR129

7 26,7 0,5 8,5 CR135

7,57 24,63 0,5 8,5 CR136

5,69 17,84 1 8,5 CR137

4,44 30,44 1 8,5 CR138

5,5 25 1 8,9 CR139

6 28,7 1 8,5 CR150

PILO T CONTROL VALVE METERING CUR VES

LINEAR CHARACTERISTICS WITH STEP....continued

Pag. 64 HT 73 / B / 102 / 0308 / E


SORTED BY ID NUMBER

PRESSURE( BAR )

STROKE( mm )

ID NUMBER

A B C D E F

8 16.3 30 1.4 6 9 CR119

1,5 8 17,3 2 7 9 CR124

0 20 90 0,8 6 9,3 CR130

2 8 28 1 5 9 CR194

5.5 20 33 0.8 6.5 9 CR141

7 20 32.5 0.8 6.5 9 CR142

PILO T CONTROL VALVE METERING CURVES

BROKEN CHARACTERISTICS WITHOUT STEP

pressure

plunger stroke

A

C

D FE

B

HT 73 / B / 102 / 0308 / E Pag. 65


SORTED BY ID NUMBER

PRESSURE( BAR )

STROKE( mm )

ID NUMBER

A B C D E F

0,2 2,8 8,4 0,5 5,7 8,4 CR102

1,5 8 15 2 7 8,5 CR103

1,15 4 11 0,6 5,4 8,4 CR111

1 4,5 9 1 7,5 8,5 CR114

1 8,3 14 1,1 7 8,4 CR118

7,5 15 28 1,8 6 8,5 CR134

8,5 12,5 32 1 3 8,5 CR144

7,5 15 32 1 6 8,5 CR151

5 9,5 21,5 1,3 5 8,6 CR154

6 15 28 1 6 8,5 CR156

2 5 8 1 7 8,5 CR164

2 7 20 1 5 8,5 CR174

7,5 15 20,7 1,2 5,4 6,5 CR184

7,5 12 24,2 1 5,2 8,5 CR161

PILO T CONTROL VALVE METERING CURVES

BROKEN CHARACTERISTICS WITH STEP

pressure

plunger stroke

A

C

D F

B

E

HT 73 / B / 102 / 0308 / E Pag. 67


OIL SAMPLING VALVES

Pag. 68 HT 73 / B / 102 / 0308 / E


O I L S A M P L I N G V A L V E S INT R ODUC T ION

T he Oil Sampling Valve provides

a permanently fitted, cost effective solution for collecting oil samples

from a pressurised hydraulic system while

that system is running under normal conditions ,

which is a recognised method of collecting

a representative sample of oil reflecting the

true condition of oil within the system.

It is also important that the oil is not

contaminated either during collection or until

it reaches the laboratory. B y us ing the correct

valve model to suit the system pressure to

which it will be fitted this contamination free

collection can be achieved.

O P E R AT I O N

T he oil sampling valve includes an as s embly of a number of grooved dis cs which form an orifice of known length.

B y varying the number of dis cs this orifice length can be controlled s uch that it can be made s uitable for different s ys tem pres s ures and allow s amples to be taken for s ys tems of different pres s ure without the danger created by oil jetting at high velocity .

As there are no moving parts , and the oil velocity is low,there is no tendency to create contamination within theunit. All parts are non-magnetic. T he unit is s uitable fors ampling oil from s ys tems with pres s ures of up to 420bar and is s uitable for any type of fluid.

T he appropriate model mus t be s pecified for the s ys tempres s ure. S ample bottles , with a graduated s cale up to250 ml to IS O-4796, are als o available.

O I L S A M P L I N G V A L V E S INS TALLATION

HT 73 / B / 102 / 0308 / E Pag. 69


O I L S A M P L I N G V A L V E S T E C HNIC AL DATAL

(se

e ta

ble

)

3/8" B S P

10

(0.3

9)

M O DE L PA R T S Y S T E M DI M E N S I O N W E I G H TN U MB E R N U MB E R P R E S S U R E L (gr )

(ba r ) m m ( inc he s )

201A-1-1 B 9396010003 20 98.5 (3.88) 469

201A-1-2 B 9396010013 50 97.5 (3.84) 471

201A-1-4 B 9396010023 100 99.0 (3.90) 474

201A-1-6 B 9396010033 140 100.5 (3.96) 478

201A-1-8 B 9396010043 180 102.0 (4.02) 481

201A-1-10 B 9396010053 220 103.5 (4.07) 485

201A-1-12 B 9396010063 250 105.0 (4.13) 520

201A-1-14 B 9396010073 300 106.5 (4.19) 523

201A-1-16 B 9396010083 350 108.0 (4.25) 527

201A-1-18 B 9396010093 400 109.5 (4.31) 530

201A-1-20 B 9396010103 450 111.0 (4.37) 533

Note: T he chart s hows model numbers des igned to be us ed with mineral oilsand emuls ion. Models are available to be us ed with V IT ON ® seals andphos phate es ter fluids ; for details pleas e contact our T ech. Dpt.T ighten this

nut to 34 Nm

80

60

40

20

80

70

60

50

40

30

20

10

VIS

CO

SIT

Y (c

St)

AT

AT

MO

SP

HE

RIC

PR

ES

SU

RE

0 70 140 210 280 350 420

160

140

120

100

0 70 140 210 280 350 420

P R IMAR Y P R E S S UR E (bar) P R IMAR Y P R E S S UR E (bar)

L E NG T H 1 VALVE L E NG T H 2 VALVE

• S ampling flow: 100cc/min with fluid at 30 cS t• Maximum temperature: 100oC

1 D

ISC

2 D

ISC

S

4 D

ISC

S

6 DIS

CS

8 DIS

CS

10 DIS

CS

12 DIS

CS

14 DIS

CS

16 DIS CS

18 DIS CS

20 DIS CS

Via M.L. King, 6 - 41122 MODENA (ITALY)

Tel: +39 059 415 711

Fax: +39 059 415 729 / 059 415 730

INTERNET: http://www.hansatmp.it

E-MAIL: [email protected]

HYDRAULIC COMPONENTS

HYDROSTATIC TRANSMISSIONS

GEARBOXES - ACCESSORIES

As HANSA-TMP has a very extensive range of products and some products have avariety of applications, the information supplied may often only apply to specificsituations.

If the catalogue does not supply all the information required, please contactHANSA-TMP.

In order to provide a comprehensive reply to queries we may require specific dataregarding the proposed application.

Whilst every reasonable endeavour has been made to ensure accuracy, this publicationcannot be considered to represent part of any contract, whether expressed or implied.

HANSA-TMP reserves the right to amend specifications at their discretion.

Documents

HT 73 / B / 103 / 0308 / E Hydraulic Pilot Control Valves · hydraulic pilot control valves ht 73 / b / 103 / 0308 / e 23 to 51 cm3/rev (1.4 to 3.1 cu.in/rev) 280 bar (4000 psi) peak