Upload
hoangphuc
View
226
Download
3
Embed Size (px)
Citation preview
PAGE LAST UPDATED: 6-15-2009toll-free order line: 800.633.2302 toll-free fax line: 877.633.2302254
N E W ! ! - G e w a T o o l s
GW481917
GW481300
GW467620
GW467575
GW466849
GW467505
GW467648
CLAMPS
item # description NET
GW467116 Parallel hand screws, 40 mm opening, 70 mm depth. $ 29.69
GW466849 Jointing clamp, adjustable. Mounts on the middle bout. 136.59
GW467505 Crack clamp, 4 part - violin. Flat profile brass shafts. Move-able, glue-repellant polyamid jaws.
182.91
GW467525 Crack clamp, 4 part - cello. Flat profile brass shafts. Move-able, glue-repellant polyamid jaws.
190.03
GW467555 Crack clamp, 6 part - bass. Flat profile brass shafts. Move-able, glue-repellant polyamid jaws.
320.68
GW467570 Crack clamp for violin/viola. Brass, 3 arms adjustable in length & angle, one adjustable holding arm, polyamid jaws.
147.27
GW467575 Same as above, for cello. 163.90
GW467620 GEWA-OPTI Crack Repair Clamp System. For gluing horizontal cracks, perfect height compensation. 4 adjustable ball head steel screws on top & base. Violin.
330.18
GW467648 Vertical edge clamp, Swiss model. Vertically & horizon-tally adjustable, spring guided, 4 screws. Lightweight titanium.
148.46
Howard Core Company is very proud to be the Exclusive Distributor of Gewa Tools in North America!!
We have always done our best to maintain a large inventory and selection of quality tools for the luthier. Over the years, this selection has become one of the largest and best in the US.
And now, it’s gotten even BIGGER!
Gewa Music is one of the largest distributors in Europe, and is well-known for their quality product line. All of the tools you see on the next three pages are new to our catalog! Rather than mixing them in with our existing selection of tools, we have listed them here so that you can more easily familiarize yourself with these new products. Please be aware that there are plenty more clamps, peg shapers, gauges, etc. on the remaining pages of this catalog.
GW481925
GW481970
HAMMERS
item # description NET
GW481925 Hammer, for edge inserts. $ 26.13
GW481970 Soundpost hammer, with wooden handle. Violin. 38.61
GW481971 Soundpost hammer, with wooden handle. Cello. 47.51
CUTTING TOOLS
item # description NET
GW481300 Chopping knife with leather handle. 22.5 cm length. $ 16.63
GW481910 Purfling cutter, Saxon model. 197.16
GW481917 Cutting gauge. For cutting borders, purflings, etc. Measur-ing scale up to 60 mm. Working scale 0 - 120 mm.
27.32
GW467116
GW481910
PAGE LAST UPDATED: 6-15-2009www.howardcore.comemail: [email protected] 255
N E W ! ! - G e w a T o o l s
GW481960
GW466100
GW481956
MISCELLANEOUS
item # description NET
GW481960 Violin pan, for repairs. Felt-covered. $ 78.39
GW466670 Inner bout repair screw, for violin. Glue repellant syn-thetic, high precision. Brass winding.
8.08
GW466671 Corner repair screw, for violin. Glue repellant synthetic, high precision. Brass winding.
8.08
GW466672 Outer bout repair screw, for violin. Glue repellant syn-thetic, high precision. Brass winding.
8.08
GW485060
GW485065
GW485082
GW485085
GW485087
MARKING & MEASURING TOOLS, TEMPLATES
item # description NET
GW485052 Straight edge. Steel with rounded edge, without calibration. 50 cm.
$ 26.13
GW485060 Variable angle bevel. 95 mm length. Hardened steel edge, rosewood handle w/ brass fittings.
23.75
GW485065 Precision square. 60 x 40 mm. Wit Lock. 19.60
GW485070 Precision square, 100 x 65 mm. Wit Lock. 41.57
GW485082 Protractor. Calibration 1º - 180º. Metal. 14.25
GW485085 Metal marking gauge. 68.89
GW485087 Wood marking gauge. 26.13
GW486300 Bridge templates, for violin, viola, & cello. Set of 6. 179.95
GW486305 Fingerboard rounding template, for violin. Rounding radius 41.5 mm
18.41
RASPS & FILES
item # description NET
GW482261 Precision flat rasp, 200 mm length, cut 1. $ 45.13
GW482263 Precision flat rasp, 200 mm length, cut 2. 52.26
GW482411 Precision flat rasp, 150 mm length, cut 1. 47.51
GW482500 Half-round rasp, 125 mm length, cut 3. 43.94
GW482800 Needle file, 100 mm length, cut 4. 19.19
GW482805 Needle file, 100 mm length, cut 1. 18.05
SHAPERS & REAMERS
item # description NET
GW465940 Peg reamer, violin. Taper 1:30. Three cutting edges, cut length 105 mm. Ø 4.0 - 7.5 mm.
$ 55.82
GW465950 Peg reamer, cello. Taper 1:25. Three cutting edges, cut length 200 mm. Ø 8.0 - 16.0 mm.
97.99
GW466048 Peg reamer, cello. Taper 1:25. Three cutting edges, cut length 195 mm. Ø 10.0 - 16.5 mm.
146.98
GW466060 Endpin reamer, cello. Taper 1:17. Three cutting edges, cut length 160 mm. Ø 16.0 - 25.5 mm.
245.85
GW466100 Peg shaper, violin. Taper 1:30. Ø 7.5 - 9.2 mm, cut length 50 mm.
296.93
GW466101 Replacement blade for #GW466100, above. 59.39
GW482261
GW482263
GW482411
GW482500
GW466101
PAGE LAST UPDATED: 6-15-2009toll-free order line: 800.633.2302 toll-free fax line: 877.633.2302256
GW481755
GW481771
GRINDER
item # description NET
GW481755 Visual grinder. For knives, center punch, etc. 220V (euro plug). Includes 1 grinding wheel. NOTE: This item will require a 220V / 110V adapter! (item #736002-A, $25.00 NET)
$ 1,015.48
GW481771 Replacement grinding wheel for GW 481755, above. 60 granularity.
95.02
GW481776 Replacement grinding wheel for GW 481755, above. 120 granularity.
95.02
BENDING IRON
item # description NET
GW481933 Bending iron, for cello. 110V, Euro plug. Brass body, ther-mostat with controller, pilot lamp & bending sheet. Requires connecting cable, item #GW481949 (below), & 220V / 110V adapter (item #736002-A, $25.00 NET).
$ 1,365.86
GW481935 Bending iron, like above, for bass. 1,538.07
GW481949 Connector cable for bending iron, above (necessary item!) 13.06
ROUTER
item # description NET
GW481902 Portable router. Perfect for milling out purfling channel. Includes two cutter bits (1.5 mm & 2.0 mm), and adjustable catch (3.5. - 5.5mm). 110 V.
$ 1,193.64
GW481903 Replacement bit - 1.5 mm. 13.06
GW481904 Replacement bit - 2.0 mm. 13.06
GW481905 Replacement bit - 2.5 mm. 13.06
GW481907 Replacement bit - 1.8 mm. 13.06
N E W ! ! - G e w a T o o l s
PLANES
item # description NET
GW468020 Arched sole plane, 30/10 mm, with 10 mm toothed blade. $ 71.62
GW468040 Arched sole plane, 37 1/2 mm. Mittenwald model. 79.28
GW468520 Replacement blade for GW468020, above. 23.64
GW468540 Replacement blade for GW468040, above. 23.64
GW468610 Stanley plane, No. 102. 43.71
GW468645 Stanley plane, No. 9 1/2. 111.64
ORDER ONLINE !! www.howardcore.com
GW468020GW468040
GW468520GW468540
GW481902
GW481949
GW481933DISCONTINUED
PAGE LAST UPDATED: 6-15-2009www.howardcore.comemail: [email protected] 257
p e g h o l e r e a m e r s & p e g s h a p e r s
american made peg hole reamers
no. description NET
730500 Violin $ 35.00
730600 Cello 80.80
730105
american peg shapers
Adjustable shapers, cuts all sizes from 1/4 -4/4 violin & viola. Cello shaper cuts all size Cellos
no. description NET
730105 Violin $ 53.90
730205 Cello 70.00
BLADES FOR AMERICAN MADEPEG SHAPERS
no. description NET
230 Violin, for American model $ 14.15
231 Cello, for American model 19.55
730111
730525
WiTTner peg shaper KiT neW!!
For violin & viola. 7.0 mm - 9.4 mm. Cone - 1:20, 1:25, 1:30. Width of blade - 51 mm.Use with Wittner Ultra Pegs, or with any wooden pegs Ø 0.275” - 0.370”.
no. description NET
730111 Wittner peg shaper kit $ 145.50
278 (2) replacement blades. 39.79
aehnelT peg shapers & reamers
no. description NET
F21000 Peghole reamer for violin, small. Taper 1/30. $ 100.93
F21200 Peg shaper for violins 1/4 - 1/16 sizes. 119.28
F21202 Peg shaper for 4/4 - 1/2 size violin, viola. 133.04
F22000 Peghole reamer for violin, standard. Taper 1/30. 105.51
F22100 Peghole reamer for cello, taper 1/25. 174.35
F2210A Reamer for cello peghole bushings. 201.87
F22300 Peg shaper for cello, 4/4 - 1/2 sizes. 169.74
F22350 Peg shaper for lute. 178.93
F22400 Endpin reamer for cello. 201.87
F22500 Endpin reamer for bass. 298.21
F22600 Endpin reamer, cello/bass. 504.67
BLADES FOR AEHNELT PEG SHAPERS
no. description NET
212 Replacement blade for F21202, above. $ 25.68
212-S Replacement blade for F21000, above. 25.68
223 Replacement blade for F22300, above. 28.44
more reamers, Taper pin, drill BiT, roUTer
no. description NET
730525 Taper pin for peghole bushing - violin. Taper 1/20, Ø 10.0 mm - 4.5 mm, length 165 mm.
$ 70.67
735666 Spiral peghole reamer, violin/viola. 46.55
735666-T Peghole reamer. Like above, with TiN coating. 58.15
T-2458 Peghole router 87.16
706016 Drill bit. Double twist auger bit with outer spurs for cutting clean, cylindrical holes. Length 235 mm. Hexagonal shaft 12 mm.
8.78
F21000
F21200
F21202
F22100
F2210A
F22300
F22350
F22400 F22500
735666-TT-2458
706016
730600
730500
PAGE LAST UPDATED: 6-15-2009toll-free order line: 800.633.2302 toll-free fax line: 877.633.2302258
730512
730631
730532730531
730621
730601
730505
730513
VIOLIN PEGHOLE REAMERS (VIOLA TO 1/2 SIZE VIOLIN)STANDARD TAPER 1/30 (matching shaper: #730102)
no. description NET
730502 Violin Standard, Taper 1/30 Ø 5.5/10mm, length 135 mm. 79.69
730512 TiN-coated Violin Standard 100.60
730522 Normal, standard violin/viola, spiral. 87.54
730532 TiN-coated, standard violin/viola, spiral. 109.74
herdim peg hole reamersFor trimming and finishing pegholes. Made of high-speed steel (hardened to 62 RC), the cutting edge is abrasion resistant even under excessive use. Our Peghole Reamers come with 3 cutting edges only, which is best for achieving perfectly round holes. Together with our Peg Shapers they give you a precise fit of pegs and pegholes.
VIOLIN PEGHOLE REAMERS (1/2 - 1/16 SIZE VIOLIN)SMALL TAPER 1/30 (matching shaper: #730101)
no. description NET
730501 Violin Small, Taper 1/30 Ø 4.0/7.5mm, length 105 mm. $ 66.63
730511 TiN-coated Violin Small. 87.54
730524 Normal, small violin, spiral. 73.17
730531 TiN-coated, small violin, spiral. 94.72
VIOLIN PEGHOLE REAMERS (VIOLA TO 1/2 SIZE VIOLIN)IRREGULAR TAPER 1/20 (matching shaper: #730103)
no. description NET
730503 Violin, Taper 1/20 (irregular) Ø 3.5/10mm, length 130 mm. $ 81.65
730513 TiN-coated, iregular violin. 100.60
730523 Normal, 1/20 irregular violin, spiral. 90.15
730533 TiN-coated, 1/20 irregular violin, spiral. 111.06
CELLO PEGHOLE REAMERS,(matching shaper: #730201-03 & 730801)
no. description NET
730601 Cello, Taper 1/25 Ø 8/16mm, length 200 mm. $ 114.97
730611 Cello TiN-coated. 152.21
730621 Normal, 1/25 standard cello, spiral. 136.52
730631 TiN-coated, 1/25 standard cello, spiral. 178.99
LUTE / VIOLA PEGHOLE REAMERS,(matching shaper: #730201-04 & 730801)
no. description NET
730505 Lute peghole reamer. $ 130.65
HERDIM TAPER PINS
Taper pins are for setting ring-shaped peghole bushings and for smoothing the surfaces of the holes. Made of tool steel with precision-ground conical pin.
no. description NET
730521 Violin, taper 1/30, 10 X 4.5 mm diameter, length 165 mm. $ 69.66
730622 Cello, taper 1/25, 15 X 6 mm diameter, length 225 mm. 135.16
h e r d i m p e g h o l e r e a m e r s
ALL TOOL PRICES ARE NET!!
straight cutting edges are particularly sharp and guarantee perfectly round holes.
spiral cutting edges allow for previously unheard of cutting quality. The wood fibers are at an angle which makes these reamers completely chatter-free, ensuring perfectly round holes. This is especially important for old instruments with very hard medullary rays and sensitive peg-box walls. Polished rosewood handles.
Tin coating (titanium-nitride) provides a three-fold improvement in the reamer’s edge life, protects it from corrosion and reduces friction during use. By allowing a smoother and gentler cut, it also reduces the stress placed on the pegbox. The sharpness is not affected by the coating in any way.
PAGE LAST UPDATED: 6-15-2009www.howardcore.comemail: [email protected] 259
h e r d i m p e g s h a p e r s
SPARE BLADES FOR HERDIM PEG SHAPERSHeavier, best quality carbon steel, tempered to extreme hardness, two cutting edges.no. net description730100 $ 5.22 for violin, nos. 730101-3730200 6.54 for cello, nos. 730201-3730109 10.45 for violin, nos. 730101-3 730209 16.56 for cello, nos. 730201-4, 8
“HERDIM” MULTI PEG SHAPER
The “HERDIM” MULTI is the most sophisticated peg shaper for professional restoration. By adjust-ment of diameter and taper pegs can be shaped to match given peghole sizes. Less or no trimming of the peghole saves working time and - even more important - saves the scroll substance. Also ideal for trimming peghole bushings and for his-torical instruments.
Separate adjustment nuts for taper and diameter. Machined in ultimate precision from aircraft alu-minum alloy, anodized. Razor-like one-way blades for a perfectly smooth surface. Satisfaction guar-anteed! Taper: 1/15 - 1/100.
no. description NET730800 Violin / viola, Ø 6.0 - $ 333.16 12.0 mm, length 50 mm. 730801 Cello, Ø 10.0 - 15.0 421.99
730101 730102 730201 730202 730203 730800
herdimpeg shapers
The seven models we offer each feature a range of peghole sizes, allowing them to cover the whole range of peg sizes, from the smallest violin to the largest cello. The brass bodies are fitted with double-sided blades which display high cutting performance and excellent edge-holding properties. Resharpening of the blades is not recommended due to the differential hardening of the cutting edges. The soft plastic case provides a comfortable, non-slip grip. All peg shapers come with instructions for use and a key for adjusting the blade.
VIOLIN STANDARD, TAPER 1/30 (matching reamer: no. 730502)
For 3/4 - 4/4 Violin/Viola. Length of the holes: 50 mm. Size (thick end): 8.0 / 8.5 / 9.0 / 9.5 mm. Weight: 540 g.
no. NET730102 $ 158.08
VIOLIN IRREGULAR, TAPER 1/20 (matching reamer: no. 730503)
For 1/8 - 4/4 Violin/Viola. Length of the holes: 50 mm. Size (thick end): 7.25 / 8.0 / 8.75 / 9.5 mm. Weight: 560 g.
no. NET730103 $ 158.08
VIOLIN SMALL, TAPER 1/30 (matching reamer: no. 730501)
For 1/16 – 3/4 Violin. Length of the holes: 50 mm. Size (thick end): 6.0 / 6.5 / 7.0 / 7.5 mm. Weight: 590 g.
no. NET730101 $ 158.08
CELLO SMALL, TAPER 1/30 (matching reamer: no. 730601)
For 1/8 – 1/4 Cello & Violin. Length of the holes: 80 mm. Size (thick end): 10.75 / 11.5 mm. Weight: 690 g.
no. NET730201 $ 154.17
CELLO LARGE, TAPER 1/25(matching reamer: no. 730601)
For 3/4 - 4/4 Cello. Length of the holes: 80 mm. Size (thick end): 13.75 / 14.5 mm. Weight: 600 g.
no. NET730203 $ 154.17
CELLO MEDIUM, TAPER 1/25(matching reamer: no. 730601)
For 1/4 – 3/4 Cello. Length of the holes: 80 mm. Size (thick end): 12.25 / 13.0 mm. Weight: 640 g.
no. NET730202 $ 154.17
ALL TOOL PRICES ARE NET!!
LUTE / VIOLA DA GAMBA, TAPER 1/25 (matching reamer: no. 730505)
For Lute and Viola da Gamba. Length of the holes: 80 mm. Size (thick end): 11.3 / 14.5 mm. Weight: 600 g.
no. NET730204 $ 154.17
730100
730109
730200
730209
PAGE LAST UPDATED: 6-15-2009toll-free order line: 800.633.2302 toll-free fax line: 877.633.2302260
american made endpin reamers
no. description NET
730700 Cello endpin reamer. $ 128.25
e n d p i n r e a m e r s
730721
730722
herdim endpin reamers
Herdim Endpin Reamers come in longer sizes to cover a wider span of endpin diameters and allow more varied use. The Cello Endpin Reamer which overlaps with the Peghole Reamer may also be used for enlarging pegholes for bushings. All reamers are made of high speed steel, tempered to HRC 61, for a sharp and durable cutting edge.
730702
BASS ENDPIN REAMERSTaper 1/17, Ø 23.0/36.0 mm, length 221 mm.
no. description NET
730702 Straight, uncoated. $ 310.94
730732 Spiral, TiN-coated. 402.63
BASS ENDPIN REAMER, OVERSIZEDFor bushings.Taper 1/17, Ø 46.0/33.0 mm, length 221 mm.
no. description NET
730722 Spiral, TiN coated. $ 655.85
CELLO / BASS ENDPIN REAMERCombination cello & bass reamer.Taper 1/17, Ø 39.0/20.0 mm, length 323 mm.
no. description NET
730703 Straight, uncoated. $ 628.41
ALL TOOL PRICES ARE NET!!
730700
730732
CELLO ENDPIN REAMERSTaper 1/17, Ø 15.0/27.5 mm, length 212.5 mm.(also suited for cello peghole bushings).
no. description NET
730701 Straight, uncoated. $ 212.95
730721 Spiral, uncoated. 231.25
730731 Spiral, TiN coated. 293.96
PAGE LAST UPDATED: 6-15-2009www.howardcore.comemail: [email protected] 261
“King sTones”
no. NET grit size in mm
711001 $ 36.28 1800 Grinding 207 x 66 x 34
711002 36.28 1200 Grinding 207 x 66 x 34
711004 98.64 8000 Honing 185 x 65 x 19
KING COMBINATION STONE
711005 52.26 1000/6000Grinding/finishing
205 x 50 x 25
s h a r p e n i n g s t o n e s & k n i v e s
Japanese Knives (KogaTana delUxe)
Japanese cutters of fine quality laminated steel, easier to resharpen and less brittle than “Western” cutters. The blade is tempered to a hardness of 60° - 61° Rockwell and trimmed to a razor-like cutting edge. The beveling is either on both sides for versatile application or on one side only. The one-sided bevel should be preferred if extreme cutting precision is demanded (i.e. veneer of inlay work or marking cuts).
Kogatana come without handles. We recommend to wrap the blades with, according to Japanese habit, a leather strip or fix a slim wooden handle.
These are handforged by master Shozo Ikeuchi Lo in traditional style. By multiple folding of the steel a “woodgrain” pattern is achieved (“Damascus” steel) and the strength and durability of the blade is considerably improved.
bevel: both sided bevel: left bevel: right
width no. NET no. NET no. NET
18 mm 710501 $ 91.45 710511 $ 94.06 710521 $ 91.45
15 mm 710506 74.47 710516 94.06 710526 74.47
12 mm 710502 74.47 710512 83.61 710522 74.47
10 mm 710507 74.47 710517 75.78 710527 74.47
8 mm 710503 74.47 710513 75.78 710523 74.47
6 mm 710504 74.47 710514 75.78 710524 74.47
3 mm 710505 74.47 710515 75.78 710525 74.47
sTone condiTioner - nagUra sTone
no. NET grit size in mm
711301 $ 24.94 Natural ca. 50 x 40 x 30
saBaTier WoodWorKing Knives
Sabatier is one of the oldest manufacturers of knives and other high-performance cutting tools in France. The blades of these knives are made of XC 100 stainless surgical steel, hardened to approximately 62 RC, and come sharpened and ready to use. The tapered, polished Macassar ebony handles are securely held in place by brass rivets. Blade length 70 mm, overall length 180 mm, blade width approximately 24 mm.
no. description NET
700411 Double bevel $ 31.35
700412 Right bevel (for left-handed users). 31.35
700413 Left bevel (for right-handed users). 31.35
honing cone
no. description NET
705393 Cone-shape, half-round diamond coated sharpener. Out-side coated only. Ø 9.5 - 19.3 mm. Length 152 mm.
$ 64.02
Knives
Extremely hard, long-lasting alloy steel (HCR 62-63) with handle. German.
no. width NET
700301 6 mm $ 38.57
700302 8 mm 39.95
700303 10 mm 41.33
700304 12 mm 46.84
700305 15 mm 52.36
700306 18 mm 59.25
pfeil WoodWorKing Knives
Special Swiss alloy steel hardened to approx. 59-60 RC, double bevel. Length 160 mm, blade thickness 2 mm. Rosewood handle.
no. width NET
700390 3.5 mm $ 28.74
700391 6 mm 28.74
700392 9 mm 28.74
700393 12 mm 28.74
700394 15 mm 28.74
700395 19 mm 28.74
Belgian lUmp BlocK sTones
no. NET size in mm
705556 $ 85.51 150 x 40 x 20
705557 24.22 75 x 30 x 20
700411
700412
PAGE LAST UPDATED: 6-15-2009toll-free order line: 800.633.2302 toll-free fax line: 877.633.2302262
g l u e p o t s & l a m p s
herdim elecTric glUe poT
no. description NET
736002 Compact electric glue pot for violinmaking and other smaller scale work. Ø 105 mm, height 160 mm. 120W. 110 V. Ceramic glue container, 0.25 liter.
$ 254.77
736003 1 liter, for large scale projects. 220 v. 240 W. Plastic glue container & lid.
361.66
736003-A Adapter 220V to 110V, for 736006 above. 25.00
736101
706003
herdim spiriT lamp glUe poT
A traditional glue pot heated by an adjustable spirit lamp. The glue kettle, submerged in water, is made of ceramic in order to avoid oxidation (blackening) of the glue. Volume: 0.25 Iiter. Brass housing, aluminum sole. 1/2 year guarantee.
no. description NET
736101 Glue pot w/ spirit lamp. (no. 706003) $ 173.10
736102 Glue pot w/out spirit lamp. disconTinUed - While sUpplies lasT!
89.08
conTainers & lids
no. description NET
736000 Glue kettle, ceramic, for HERDIM glue pots. Volume: 0.25 L $ 14.37
736005 Clear lab glass glue kettle for HERDIM glue pot. Volume: 0.25 L 20.13
736015 Plastic, double-chambered glue container for simultaneously heating glue and water. Polypropylene, 0.25 l.
16.98
736016 Plastic lid for use with #736016, above. Has hole for brush. 11.76
736005
spiriT lamps & WicKs
no. description NET
706003 Steel spirit lamp w/ wick rack & handle. Vol. 120 ccm. Burns up to 6 hours. (for Herdim Glue Pot no. 736102).
$ 89.91
706005 Wick for nos. 706002 & 706003 [length 1m). 3.05
706008 Glass spirit lamp, 120 ccm capacity, round wick. 18.93
706009 15 cm wick for #706008 lamp. 2.16
706013 Glass spirit lamp - 120 ccm. 18.15
706014 15 cm replacement wick for item #706013, above. 1.83
736016736015
706011
706013
706014
706008
736002
elecTric glUe poT - american made
A large volume glue pot which operates without water jacket by a heated internal container. The corrosion free aluminum glue kettle is removable. Thermostatic, preset temperature con-trol. Reliable design for professional use. Volume: 1 quart. 1/2 year guarantee.
no. description NET
706011 Glue pot 110V. American-made. $ 99.00
706012 Removable aluminum kettle. 41.59
PAGE LAST UPDATED: 6-15-2009www.howardcore.comemail: [email protected] 263
706107
glUe BrUshes - horseTail hair
Corrosion free thread winding. No glue blackening.
no. NET
706105 size 2 (Ø 14 mm) $ 8.85
706106 size 4 (Ø 16 mm) 10.15
706107 size 6 (Ø 18 mm) 11.64
706108 size 8 (Ø 21 mm) 14.32
GW464750 10 mm - no metal. 7.13
GW464760 14 mm - no metal. 8.31
linden BasT glUe BrUshes
Stiff bristles, resistant to wear, can be shaped with a chisel. When worn, new bristles are created by hammering the handle. Length approx. 21 cm.
no NET
706125 6 mm $ 5.22
706126 11 mm 7.84
706127 14 mm 10.34
g l u e b r u s h e s , a n i m a l g l u e s
animal glUes
Animal glues have been used by woodworkers for over 4,000 years. They are completely non-toxic, non-ageing, are easily reversible by heat and therefore ideal for repair work. The use of these glues is relatively uncomplicat-ed. The most important criterion is an even, controlled heating process and the maintenance of a defined temper-ature range (about 60˚ - 70˚ Centigrade or 140˚ to 158˚ Fahrenheit) which keeps the proteins from degenerating.
no. description NET
G 50 Ground hide glue, best quality, for flexible bonds. 1 lb. bag. $ 5.25
G 51 Rabbit glue, higher viscosity than hide glue, strongest bonds. 500 gram bag. (approximately 1 lb.)
15.43
G 52 Fish glue, pure bladder of Russian sturgeons, low viscosity, extremely strong. 100 grams.
193.60
G 53 Animal bone glue. 1 kilogram. 9.15
G 50
ALL TOOL PRICES ARE NET!!
G 52G 51
GW464760
PAGE LAST UPDATED: 6-15-2009toll-free order line: 800.633.2302 toll-free fax line: 877.633.2302264
herdim precision rasps, handcUT
Rasps come in where shaping no longer follows the laws of plane geometry. Therefore, they are equally indispensable for the cabinet maker, the violin maker, model builder or stuccoist. The best rasps are still cut by hand. Each tooth is formed individually with ham-mer and chisel and no two teeth are exactly the same. It is precisely this slightly irregular tooth configuration that ensures the smooth removal of wood and avoids clogging of the rasp. You can use these tools not only for hard and soft wood but also for leather, plastic, plaster and soft metal. Hard carbon steel body, tempered tang. As they are handcrafted, the sizes of these rasps may vary slightly. cut 3=coarse, 4=medium, 5=fine, 10=extra fine.
r a s p s
ALL TOOL PRICES ARE NET!!
1 flat rasp (with handle tang)
number cross section cut length cut NET
704505 25 x 4 mm 200 mm 3 $ 46.97
704506 25 x 4 mm 200 mm 4 51.49
704507 25 x 4 mm 200 mm 5 59.15
2 flat rasp
number cross section cut length cut NET
704502 10 x 4 mm 125 mm 5 $ 33.97
704704 16 x 4 mm 150 mm 5 41.75
704707 20 x 5 mm 200 mm 5 60.81
704709 Herdim “Ultra”24 x 5 mm
200 mm 10 154.75
3 cabinet rasp
number cross section cut length cut NET
704716 20 x 4 mm 150 mm 5 $ 52.98
704720 24 x 5 mm 200 mm 3 54.45
704721 24 x 5 mm 200 mm 4 60.81
704722 24 x 5 mm 200 mm 5 64.14
704724 Herdim “Ultra”24 x 5 mm
200 mm 10 167.77
4 half-round rasp
number cross section cut length cut NET
704732 16 x 5 mm 150 mm 5 $ 46.97
704733 20 x 4 mm 200 mm 5 55.59
5 half-round rasp, slim
number cross section cut length cut NET
704741 10 x 3 mm 150 mm 5 $ 42.69
6 cross rasp
number cross section cut length cut NET
704551 16 x 5 mm 150 mm 5 $ 51.31
704553 20 x 6 mm 200 mm 5 73.64
1
23
456
PAGE LAST UPDATED: 6-15-2009www.howardcore.comemail: [email protected] 265
While we can’t get you this saw (or the 200 year old spruce!), we CAN provide you with just about any other type of luthier tool you might require. If you can’t find it on these pages, let us know - chances are, we can get it for you!
Do you have a handy tool that you’ve made yourself, and think others might like? We’d love to try it - maybe even sell it for you! If you have a home-made tool or technique you’d like to share, please email photographs and other pertinent information to [email protected].
photograph of the oldest existing sawmill in our industry, in markneukirchen, germany. The saw is powered by a water-driven wheel.
PAGE LAST UPDATED: 6-15-2009toll-free order line: 800.633.2302 toll-free fax line: 877.633.2302266
f i l e s
half-roUnd filesnumber cross section cut
lengthcut NET
705020 13 x 4 mm 125 mm 0 $ 39.38
705021 13 x 4 mm 125 mm 2 44.36
705022 15 x 4.5 mm 150 mm 00 39.91
705023 15 x 4.5 mm 150 mm 0 41.99
705024 15 x 4.5 mm 150 mm 1 45.13
705068 15 x 4.5 mm 150 mm 2 49.05
705069 15 x 4.5 mm 150 mm 3 50.00
705086 21 x 6 mm 200 mm 000 52.61
705025 21 x 6 mm 200 mm 00 53.15
705026 21 x 6 mm 200 mm 0 57.25
705027 21 x 6 mm 200 mm 1 58.38
705087 21 x 6 mm 200 mm 2 67.35
705088 21 x 6 mm 200 mm 3 67.35
SLIM (for bow tips, f-holes, etc.)
705028 10 x 3 mm 150 mm 0 47.74
705029 10 x 3 mm 150 mm 2 52.98
705074 10 x 3 mm 150 mm 4 56.89
cross filesno. cross section cut
lengthcut NET
705030 15 x 4.5 mm 150 mm 0 $ 58.02
705031 15 x 4.5 mm 150 mm 1 59.86
705032 21 x 6 mm 200 mm 00 81.30
705033 21 x 6 mm 200 mm 0 85.40
705034 21 x 6 mm 200 mm 1 88.96
TaBle of cUTs German Swiss
for cut no. cut no.
coarse wood 1 000 - 0
medium wood 2 0 - 1
fine wood/metal 3 1 - 2
very fine metal 4 2 - 3
ultra fine metal 5 3 - 4
The density and height of the cutting edges depend on the cut number AND the length of the file.
GROBET FILESSince the year of its founding in 1811 the Swiss company GROBET has been setting the standard for quality in the production of precision files. Although these files were originally developed for watch makers they are exception-ally well suited for woodworking, also. The workmanship and edge-holding ability of their cuts are of superb quality.
flaT filesDOUBLE CUT Swiss
number cross section cut length
cut NET
705001 15 x 2 mm 125 mm 0 $ 23.87
705002 15 x 2 mm 125 mm 2 25.78
705003 17 x 2 mm 150 mm 00 24.22
705004 17 x 2 mm 150 mm 0 25.78
705005 17 x 2 mm 150 mm 1 26.13
705078 17 x 2 mm 150 mm 2 27.97
705192 19 x 4 mm 150 mm 00 20.37
705193 19 x 4 mm 150 mm 0 22.57
705194 19 x 4 mm 150 mm 1 22.75
705012 22 x 5 mm 200 mm 000 28.21
705006 22 x 5 mm 200 mm 00 29.69
705007 22 x 5 mm 200 mm 0 31.18
705008 22 x 5 mm 200 mm 1 32.67
705013 22 x 5 mm 200 mm 2 33.19
705014 22 x 5 mm 200 mm 3 35.63
705035 22 x 5 mm 200 mm 4 37.29
705039 26 x 6.5 mm 250 mm 000 39.73
705009 26 x 6.5 mm 250 mm 00 42.69
705010 26 x 6.5 mm 250 mm 0 43.11
705011 26 x 6.5 mm 250 mm 1 46.62
SINGLE CUT (for smoothest surface - sharp edges)
704901 21 x 3mm 200 mm 2 9.57
704902 25 x 4mm 250 mm 2 13.66
eight inch hand files
used by bowmakers
ORDER ONLINE !! www.howardcore.com
groBeT lining files FOR BOW FROGS, HAND CUT
For bow frog work.
no. profile cut length cut NET
705077 16 x 3.5 mm 160 mm 0 $ 54.70
705076 16 x 4 mm 160 mm 3 23.73
WHILE SUPPLIES LAST !
PAGE LAST UPDATED: 6-15-2009www.howardcore.comemail: [email protected] 267
groBeT saddle filesPrecision files with round edges for violin nuts, saddles & bridges.
no. cross section cut length cut NET705015 0.4 x 10mm 100 mm 2 $ 31.89705016 0.6 x 10mm 100 mm 2 31.89705017 0.8 x 10mm 100 mm 2 31.89705018 1.0 x 10mm 100 mm 2 31.89705019 Complete Set of 4 files, special price 121.15
groBeT roUnd files
Very slim, finest cut up to the tip.705092, 705093, 705066 & 705057 with square handle.
no. cross section cut length cut NET705092 Ø 0.8 mm 38 mm 2 $ 15.86705093 Ø 1 mm 50 mm 2 16.63705066 Ø 1.5 mm 55 mm 2 15.68705094 Ø 1.5 mm 75 mm 2 22.57705057 Ø 2.0 mm 65 mm 2 15.68705097 Ø 4 mm 150 mm 0 26.13704927 Ø 3.6 mm 100 mm 1 23.73
groBeT needle files Knurled handles Ø 2.9mm, overall length 140 mm, cut length 75 mm.
swiss cut 0 (coarse) swiss cut 1 (fine)shape no. NET no. NETpillar 705140 $ 9.15 705040 $ 9.15flat or ward 705141 10.81 705041 10.81three square 705142 10.81 705042 10.81square 705143 10.81 705043 10.81round 705144 9.15 705044 8.78barrette 705145 10.81 705045 10.81half-round 705146 11.64 705046 11.64cross 705147 11.64 705047 11.64knife 705148 11.64 705048 11.64round-oval , cross 705149 11.64 705049 11.64pillar, round, edges 705150 11.64 705050 11.64flat, round edges 705151 11.64 705051 11.64Set, 12 pcs. 705152 122.10 705052 122.10
german saddle files
no. description NETT-2451 Set of 4 saddle files, German made. $ 55.82T-2452 E string saddle file. German. 15.44
705019
T-2451
f i l e s
needle file handles
Ergonomic plastic handles with chuck-style fastening mechanism.
no. description NET
704950 Ø 2 - 3 mm. Length 95 mm. $ 25.78
704951 Ø 3 - 4 mm. Length 95 mm. 25.78
704950 704951
file card (file cleaner)Brass bristles mounted on beech handle. Overall length: 250 mm. Brush area: 40 x 100 mm
no. NET
705091 $ 17.75
PAGE LAST UPDATED: 6-15-2009toll-free order line: 800.633.2302 toll-free fax line: 877.633.2302268
704571
handmade chinese rasps
SWORDFISH RASPS (CABINET RASP - TAPERED)
Handmade Chinese rasps. The irregular surface gives an exceptionally effective cutting action for coarse work. Sharp, stable cut.
Hardened and chromed rasps which can be bent within limits to permit a wide range of uses.
item no. cross section cut length cut NET
704569 25 x 4 mm 160 mm 3 coarse cut $ 10.22
704570 25 x 4 mm 160 mm 5 med. fine cut 10.22
704573 30 x 5 mm 240 mm 3 coarse cut 13.06
FLAT RASP
704571 24 x 4 mm 200 mm 3 coarse cut 9.15
CABINET RASP
704572 25 x 5 mm 190 mm 3 coarse cut 9.15
704572
scrapers
item no. description NET
703500 Set of scrapers - 7 pieces. 0.4 mm thickness
$ 42.82
scrapers “eBerle”
no. NET/each thickness
703507 $ 3.50 0.25 mm
703502 3.50 0.40 mm
703504 3.50 0.60 mm
703510 (swan neck) 6.06 0.70 mm
703505 4.63 0.80 mm
703506 5.10 1.00 mm703510
c h i n e s e r a s p s , s c r a p e r s
ALL TOOL PRICES ARE NET!!
scraper sharpeneritem no. description NET
703509 Ø 8 mm, length 120 mm, white oak handle.
$ 18.47
703500
703509
PAGE LAST UPDATED: 6-15-2009www.howardcore.comemail: [email protected] 269
“ece” planes BlocK plane
With screw adjustment of the blade. Body: Steamed Beech. Sole: Lignum Vitae - the hardest wood known. High quality custom made blades. Length: 150 mm; Weight: 450 g
no. width of blade NET
703101 39 mm Plane includes blade $ 133.44
703104 39 mm Spare blade 23.28
703103 39 mm Spare blade - toothed 20.13
703101
p l a n e s , a w l , w o r k b e n c h
KUJiri piercer (aWl)
no. description NET
717205 White oak handle. Blade is 55 mm, overall length 105 mm.
$ 10.45
717205
702555
no. 100 palm plane
no. description NET
702555 No. 100 Palm plane. Brass body with screw cap. Polished handle. 25 mm width, 2.2 mm thickness. Body 82 x 32 mm. 61 RC blade (extra hard).
$ 164.97
702556 Replacement blade for #702555. 16.81
Ulmia delUxe WorKBench
A good bench must be solid, have a smooth working surface and be fitted with vises capable of firmly holding pieces of all sizes. These requirements are wonderfully fulfilled by this workbench, made in Germany by ULMIA especially for our most demanding customers. Weighing in at 100 kilos, it provides unshakeable stability and optimal vibration control. The extra thick top is made of vibration dampening red beech that has been glued, sealed and ground absolutely flat - making it ideal for plan-ning and other large scale work. The front vise with double steel guide rods and the unique tail vise with a backlash-free mechanism work with the precision of a bank vault’s door. The round, rotating bench dogs allow irregularly shaped objects, such as musical instruments, to be clamped with ease. The torsion-free spindles with metal springs and full-length vise screws provide the highest possible stability.
Bench-top dimensions 1500 x 640 mm; overall dimensions 1600 x 820 mm; top thickness at bench dogs 120 mm, at center 65 mm; height 900 mm. Waxed surfaces, includes 4 bench dogs. Delivered unassembled, with instructions for easy assembly.
no. description NET
706085 See above $ 2,149.15
PAGE LAST UPDATED: 6-15-2009toll-free order line: 800.633.2302 toll-free fax line: 877.633.2302270
herdim finger planes
Small planes with a brass body for shaping the tops and backs of bowed instruments. Slim sides for edge work, and thick sole which users can modify to their own needs, if necessary. Complete with plain blade and wood wedge.
p l a n e s
ARCHED SOLE PLANES
plane no. blade width length of plane net
702528 4 mm 12 mm $ 53.15
702530 5 mm 20 mm 50.30
702532 7 mm 25 mm 50.30
702534 10 mm 32 mm 55.17
702536 12 mm 40 mm 59.98
702538 18 mm 50 mm 65.66
702542 23 mm 74 mm 114.49
FLAT SOLE PLANES
plane no. blade width length of plane net
702510 5 mm 20 mm $ 50.30
702512 7 mm 25 mm 50.30
702514 10 mm 32 mm 55.17
702516 12 mm 40 mm 59.98
702518 18 mm 50 mm 65.68
702509 23 mm 74 mm 114.49
ARCHED SOLE SPARE BLADES
use with plane no.
blade width
plain blade no. NET
toothed blade no. NET
702528 4 mm 702529 $ 9.44 ---------- ----------
702530 5 mm 702700 9.44 ---------- ----------
702532 7 mm 702533 10.04 702541 $ 14.79
702534 10 mm 702702 10.22 702812 18.82
702536 12 mm 702703 10.22 702813 18.82
702538 18 mm 702704 10.22 702814 18.82
702542 23 mm 702705 15.56 702543 22.10
FLAT SOLE SPARE BLADES
use with plane no.
blade width
plain blade no. NET
toothed blade no. NET
702510 5 mm 702400 $ 9.44 ---------- ---------
702512 7 mm 702513 10.22 702540 $ 14.79
702514 10 mm 702402 10.22 702502 18.82
702516 12 mm 702403 10.22 702503 18.82
702518 18 mm 702404 10.22 702504 18.82
702509 23 mm 702405 15.56 702505 22.10
ARCHED SOLE PLANES WITH SCREW CAP
plane no. blade width length of plane net
702560 5 mm 20 mm $ 64.91
702561 7 mm 25 mm 64.91
702562 10 mm 32 mm 75.90
702563 12 mm 40 mm 80.18
702564 18 mm 50 mm 85.58
702565 23 mm 74 mm 130.65
FLAT SOLE PLANES WITH SCREW CAP
plane no. blade width length of plane net
702566 5 mm 20 mm $ 64.91
702567 7 mm 25 mm 64.91
702568 10 mm 32 mm 75.90
702569 12 mm 40 mm 80.18
702570 18 mm 50 mm 85.58
702571 23 mm 74 mm 130.65
SEE ABOVE FOR SPARE BLADES
PAGE LAST UPDATED: 6-15-2009www.howardcore.comemail: [email protected] 271
ALL TOOL PRICES ARE NET!! ORDER ONLINE !! www.howardcore.com
finger planes - WiTh adJUsTaBle moUTh
All planes come complete with plain blades.
The World’s smallesT plane
Micro plane including case. An original gift for every tool lover.
no. description net
702527 Micro plane $ 64.02
p l a n e s
“iBex” finger planes
Precision cast, silicon bronze finger planes with accurately guided, screw locked blade. The mouth is located very close to the face for increased cor-ner workability. All planes come complete with blade.
PLANE WITH ARCHED SOLE
plane no. length x width net
703301 25 mm 8.0 mm $ 41.05
703302 30 mm 10.0 mm 44.35
703303 36 mm 12.0 mm 45.10
703304 47 mm 18.0 mm 50.10
SPARE BLADES, ARCHED OR FLAT
plain blade no.
width of blade net
toothed blade no. net
703311 8.0 mm $ 11.45 703321 $ 13.90
703312 10.0 mm 11.45 703322 13.90
703313 12.0 mm 11.45 703323 13.90
703314 18.0 mm 11.45 703324 13.90
PLANE WITH FLAT SOLE
plane no. length x width net
703401 25 mm 8.0 mm $ 41.05
703402 30 mm 10.0 mm 44.35
703403 36 mm 12.0 mm 45.10
703404 47 mm 18.0 mm 50.10
703405 60 mm 22.5 mm 58.10
SPARE BLADES, FLAT
plain plane no.
width of blade net
toothed blade no. net
703415 22.5 mm $ 16.40 703425 $ 16.50
SPARE BLADES, FLAT
plain plane no.
width of blade net
toothed blade no. net
702716 27.5 mm $ 14.90 702816 $ 18.30
SPARE BLADES, ARCHED
plain plane no.
width of blade net
toothed blade no. net
702717 27.5 mm $ 14.90 702817 $ 18.30
PLANE WITH FLAT SOLE
plane no. length x width net
703306 90 mm 27.5 mm $ 136.40
PLANE WITH ARCHED SOLE
plane no. length x width net
703307 90 mm 27.5 mm $ 136.40
PAGE LAST UPDATED: 6-15-2009toll-free order line: 800.633.2302 toll-free fax line: 877.633.2302272
rUlers
no. description NET
RU330 Metal ruler 12” / 30 cm $ 5.50
RU315 Metal ruler 6” / 15 cm 4.50
717128 Flexible precision rule, 1000 mm. Stainless steel. 39.19
717129 Flexible precision rule, 600 mm. Stainless steel. 21.85
707270 Ultra-flexible ruler. 200 x 13 x .2 mm. 10.45
707271 Ultra-flexible ruler. 300 x 13 x .2 mm. 13.72
707272 Ultra-flexible ruler. 600 x 13 x .2 mm. 25.48
707150
707240707152 707241
707153707151
m e a s u r e s & c o m p a s s e s
RU 330
RU 315
717128
717129
707270
Tape measUre
no. description NET
GT-35 Tape measure, inch/mm scales. 2 meter length. $ 9.50
707158 Inch/MM scales, 2 meter (over 6.5 ft.) overall length, ebony casing. Pocket sized.
14.16
707160 Like above, with rosewood casing. 14.16
707161 Like above, with boxwood casing. 14.16
GT-35
707158
707160
fiQUeT compasses
Solid steel with ground, hardened points and brass fittings. Compasses have quick-acting adjustment screws.
no description NET
707150 Compass divider. Leg length 150 mm. Max. opening 160 mm. $ 28.74
707151 Same as above, with pencil holder. 36.58
707152 Outside. Leg length 150 mm. Max. opening 160 mm. 28.74
707153 Inside caliper. Leg length 150 mm. Max. opening 190 mm, min. opening 25 mm. 28.74
707240 Turner’s outside caliper. Leg length 150 mm. Overall length 1,250 mm, max. opening 180 mm. 48.88
707241 Turner’s inside caliper. Leg length 150 mm. Overall length 1,250 mm, max. opening 180 mm. 42.52
PAGE LAST UPDATED: 6-15-2009www.howardcore.comemail: [email protected] 273
707100
hacKlinger gaUge
This tool makes the exact measurement of the thickness of stringed instruments possible without remov-ing the top. It is accurate within 0.1mm. Version “A” is for use on violins & violas, Version “B” is for violin - cello. The new Version “C” is improved for more general purpose measuring. It is the same size as versions A & B, the range is from 1 mm to 8 mm. It has 1 magnet only, durable smooth cap - even rough surfaces or extensive use will not harm the gauge.
no description NET
707126 Hacklinger Gauge version “C”, new model. Measuring range 1 - 8mm. 1 magnet. $ 470.33
707127 Hacklinger gauge version “D”. Measuring range 1 - 12 mm. Two magnets. 516.06
mini slide caliper
no description NET
707243 Precision caliper for taking inside and outside measurements on small objects, models, veneers, etc. Its light weight and compact size make it ideal for measuring delicate objects. Stainless steel, deep-etched scale with 0.05 mm vernier. Measuring range up to 70 mm, jaw length 19 mm, weight 23 g.
$ 24.52
707106707107
707101
707116
707108
707243
T50100
g a u g e s & c a l i p e r s
707258
707170
707259
dial caliper
no description NET
707259 Sturdy dial caliper with shock- and dust-proof analog indicator. Stainless steel slide and dial. Accurate to within 0.01 mm. Measuring length 150 mm.
$ 49.65
elecTronic caliper
no description NET
707170 Measures up to 150 mm, jaw length 40 mm. Measures inside, outside & depth, with mm/inch option. Stainless steel beam & slide. 5 digit LCD display. Zeroing switch.
$ 83.07
707258 Electronic digital caliper, mesures up to 100 mm. 67.28
no description NET
707116 Spare watch for nos. 707101-03 $ 104.75
707106 Pin head A (2 parts) 23.52
707107 Pin Head B (2 parts). Pin head A can be replaced by pin head B, on German calipers only.
18.29
707100 MADE IN USA. Use for violin AND cello! Same German watch as 707101, etc.
139.70
707105 Small graduating caliper, machined alum. frame. 9” throat, measures to 30 mm. Dial gauge reads to 0.1 mm. Assembled in USA.
141.95
T50100 Marking calipers 73.15
large calipers (and parts)
no. pin head graduation opening NET
707101 Violin A 0.10 mm 200 mm $ 296.57
707102 Cello A 0.10 mm 300 mm 340.99
707103 Bass A 0.10 mm 400 mm 384.10
“reinerT” caliper
no description NET
707108 For measuring the thickness of top and backs through the f-holes. Brass. Max. depth 110 mm.
$ 110.46
707105
PAGE LAST UPDATED: 6-15-2009toll-free order line: 800.633.2302 toll-free fax line: 877.633.2302274
WoodWorKer’s KiT
Two each 3”x 6” sheet (1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000, 12,000).One 3” Foam Block
For superior finishes on bare hardwoods and wood finishes. Use on bare woods to obtain the smoothest finish possible. Oil the wood to preserve the finish and protect the wood, then polish with Micro-mesh to obtain the final finish.When using on finishes (urethanes, epoxies, resins, etc.), sand the surface smooth with a coarse grit and polish out with the rest of the series. Polish out all the way to 12,000 for a high-gloss fin-ish or stop earlier for a more subdued finish.
Kit complete - $ 37.64 NET
hoBBy KiT
One each 3”x 4” sheet (2400, 3200, 3600, 4000, 6000, 8000).One 2”x 3” Foam Block.One 1 oz. bottle Micro-glass
A small kit designed for a variety of jobs ranging from polishing wood and golf clubs, cultured marble to acrylics and painted fin-ishes. All of our most popular grits and Micro-gloss to suit a wide variety of tasks. An excellent starter kit to acquaint you with the product and just the right size for your workbench. Polishes just about any surface. Kit complete - $15.02 NET
micro-gloss KiT
A plastic polish that really works!• Removes hairline scratches• Removes haziness and halos• Produces a high-gloss surface
A super polish especially formulated to remove, not hide, superficial scratches and other light surface damage. Micro-gloss should never be used on scratches that can be felt with a fingernail. This type of damage should be removed with Micro-mesh to prevent distortion and assure total damage removal.
The 8-oz. Micro-gloss comes complete with flannel and anti-static cream.Kit Complete - $ 23.69 NET
Kr-70 KiT
(30 square feet)One each 3”x 6” sheet (2,400, 3,200, 4,000, 6,000, 8,000, 12,000) One 3”x 3” Foam BlockOne 2oz. bottle Anti-static Cream & Wiping Tissues
For restoration of scratched, discolored or damaged fiberglass, acrylics or resins, etc. Colored and clear acrylics are repaired the same way: sand out the damage with fine sandpaper and then follow the Micro-mesh series to achieve a high-gloss finish. Kit provides all that is needed to repair minor scratches, discoloration and surface irregularities.
For deep scratches or holes, resin* and sandpaper* may be necessary in order to do a proper repair job. Fill holes with resin*, sand smooth with sandpaper*, and polish out with Micro-mesh. * not included in kit
Kit complete - $ 22.37 NET
micro-mesh regUlar
For polishing of acrylics, plastic, fiberglass, epoxy, polyurethane, painted surfaces, gel coat, varnish, wood and other fine finishes. Acrylics, automotive finishes, boats, fur-niture, gun stocks and violins are specific applications. We are pleased to offer these cushioned abrasives which are so useful in the shop. MICRO-MESH is used by many of the finest violin shops and all highly recommend it.
• Available in the kits shown, you can also save money by purchasing the various meshes in 6”x 12” pieces.• Meshes: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 and 12,000. 1500 is extra coarse, 12,000 is super fine.
All meshes are same price: $ 5.25 NET/FT
The foam block that is strongly recommended by the manufacturer is 3”x 3” and should be used. $ 2.73 NET
Nail file - 3 grits $ 1.37 NET Also available individually: Anti-static cream - 8 oz. $ 7.09 NETMicro-gloss polish - 8 oz. $ 13.80 NET
m i c r o - m e s h
PAGE LAST UPDATED: 6-15-2009www.howardcore.comemail: [email protected] 275
s a w s
712512
712969
712808
712521
712714
712713
classic 400 Jig saW no description NET
712969 Ergonomic, comfortable shape. Razor-sharp Japanese “Turbo-Cut” blades. For high-precision and curved cuts. Blade length 400 mm, dimensions 320 x 700 mm. Weight approx. 550 g.
$ 115.62
712971 Spare Turbo Cut blade 34.98
doZUKi Universal saW no description NET
712808 Most popular Japanese saw. Blade length 240 mm, blade width 50 mm, blade thickness 0.3 mm, tooth spacing 1.5 mm.
$ 54.99
handiWorK BacKsaWs
These saws provide superb control, making them perfect for precision work. The rubberized grip fits comfortably in your hand.
no description NET
712713 Blade length 135 mm; overall length 270 mm. Thickness 0.25 mm; tooth spacing 0.7 mm.
$ 19.60
712714 Blade length 150 mm; overall length 295 mm. Thickness 0.35 mm; tooth spacing 1.2 mm.
25.66
712716 Replacement blade for #712714. 13.06
coping saW no description NET
712512 Chromium-plated steel frame. 125 mm blade length. Comfortable grip. Comes with one replacement blade.
$ 23.52
712513 2 Replacement blades. 6.54
glardon JeWeler’s saW no description NET
712521 Well-constructed jeweler’s saw with 75 mm throat depth. Swiss made.
$ 60.99
712522 Repl. blade - fine (6/0) 6.06
712523 Repl. blade - med. (0) 5.70
712524 Repl. blade - coarse (5) 5.87
ORDER ONLINE !! www.howardcore.com
KaTaBa resTaUro saW no description NET
712309 100 mm blade length. Overall length 220 mm. $ 27.08
712309
PAGE LAST UPDATED: 6-15-2009toll-free order line: 800.633.2302 toll-free fax line: 877.633.2302276
no. shape width NET
710730* flat 6.0 mm $ 53.92
710731* flat 3.0 mm 53.92
710732* flat 1.5 mm 53.92
SKEW CHISELno. shape width NET
710733* right 6.0 mm $ 53.92
V - PARTING TOOLshape width no. NET
90˚ 1.5 mm 710739 $ 53.92
90˚ 4.5 mm 710734* 53.92
Sweep 9 6.0 mm 710735* 53.92
Sweep 9 3.0 mm 710736* 53.92
Sweep 9 1.5 mm 710737 53.92
Sweep 9 1.0 mm 710738 53.92
* SET, 7 PCS. no. description NET
710710 Nos. 710730 - 710736, in wooden case.
$ 339.68
g o u g e s
fUTaTsU Wari moKU hanga To (Wood BlocK carving Tools)
Professional carving tools for creating detailed contour lines. Laminated HSS-steel blades of exceptional sharpness and edge-holding ability. The Sakura (cherrywood) handle can be opened to remove the blade for sharpening. Blade length 60 mm; Handle length 85 mm; Overall length 130 mm; Blade thickness 2 mm.
cello/Bass goUge
Kirinari Nomi with an extra long blade. Specifically for the deli-cate and deep grooving of cello, bass and guitar necks. Handle: Japanese red oak without hoop. Blade length 140 mm Max. working depth 230 mm Handle length 175 mm Overall length 430 mm Blade thickness 4-5 mm
no. width NET
710098 30 mm $ 244.67
Japanese scUlpTUre Tool
Small Yarri-Kanna sculptor’s tool, all steel, with double-lay-ered laminated blade and knurled handle. For fine work in cabinetry, instrument and model making, restoration, and sculpting. Blade length 20 - 35 mm. Handle length 90 mm. Overall length 155 - 165 mm. Blade thickness approximately 5 mm.
item # blade shape width sweep NET
710116 Yarri-Kanna 9 mm - $ 79.28
pfeil compacT goUge seT
no. description NET
700691 Six pieces. Overalll length 200 mm. Blade length 90 mm.
$ 162.24
PAGE LAST UPDATED: 6-15-2009www.howardcore.comemail: [email protected] 277
grooving goUges
Fine Swiss gouges with extended neck and slightly bent, spoon type blade for concave surfaces and archings, i.e. violin tops and backs. Shaft and blade forged in one piece from carbon steel, super-finished and polished. Unvarnished Pearwood handle.
no. NET width sweep
701101 $ 78.32 13mm
701102 88.96 18mm
701103 91.34 30mm
g o u g e s & c h i s e l s
goUge - handles
Best unvarnished Pearwood which is very comfortable and easy on hands, completewith ferrule.
length: 105mm no. NET
Ø 35 mm 701601 $ 4.27
Ø 40 mm 701602 4.27
Ø 45 mm 701603 4.27
length: 78 mm
Ø 34 mm 701604 4.27
no. widthsweep
no. bevel NET
715501 6.0 mm 5 outside $ 77.20
715502 6.0 mm 8 outside 77.20
715503 7.5 mm 8 outside 80.05
715504 9.0 mm 5 outside 80.05
715505 9.0 mm 8 outside 80.05
715506 12.0 mm 5 outside 82.30
715507 12.0 mm 8 outside 82.30
715508 15.0 mm 8 outside 84.63
715509 18.0 mm 5 outside 89.61
715510 18.0 mm 6 outside 89.61
715511 18.0 mm 8 outside 89.61
715512 21.0 mm 3 outside 92.76
715513 24.0 mm 6 outside 99.30
715514 6.0 mm 3 inside 77.20
715515 6.0 mm 11 inside 86.64
715516 12.0 mm 3 inside 82.30
FLAT CHISEL sweep no. width no. bevel NET
715517 7.0 mm -- ------- $ 77.20
SKEW CHISEL sweep no. width no. bevel NET
715518 12.0 mm -- right $ 79.69
715519 12.0 mm -- left 82.30
COMPLETE SET no. description NET
715500 19 pcs. in fine English leather roll pouch. (You get pouch and #715501 “free”)
$1,587.37
marU nomi (delUxe Japanese scroll goUges)
Thin, laminated blades with mirror polished working surface for the cutting of scrolls and other delicate work in violin making and sculpturing. Extremely high cutting edge durabil-ity is guaranteed. Handle: Pearwood unvarnished, soaked in linseed oil.blade length: 60 - 80 mm; handle length: 105 mmtotal length: 190 - 210 mm; blade thickness: 2 - 3.5 mm
Japanese flaT chisels (Kirinari nomi)
These light push chisels are very popular for delicate paring cuts in cabinet-making, instrument-making and restoration work. Handle: waxed Japanese red oak without hoop. Blade length 70mm. Handle length 95mm. Overall length 260mm; blade thickness 3.0 - 4.5mm.
no. width NET
710108 3mm $ 79.04
710109 6mm 79.04
710101 9mm 79.04
710104 12mm 82.96
710102 18mm 90.80
710103 24mm 100.95
SET - 6 pcs. in fine English leather roll. 3–24mmItem # 710106 $ 525.20 NET
ORDER ONLINE !! www.howardcore.com
PAGE LAST UPDATED: 6-15-2009toll-free order line: 800.633.2302 toll-free fax line: 877.633.2302278
violin/viola holder
Fully adjustable to hold any size violin or viola (except largest) for various repair and adjusting pro-cedures such as fingerboard planing, bridge fitting, top crack repairs, stringing, etc. Padded clamp screws hold instrument securely but gently. Black anodized aluminum cradle is mounted on clear plexiglass base. We use these in our shop & highly recommend!
no. description NET
T5050 See above $ 76.35
m i s c e l l a n e o u s t o o l s
endBUTTon holder no. description NET
TH20 To hold the endbutton while turning down the shaft. Our #TH20 has already received great reviews, and is exclusively ours!
$ 18.00
TradiTional-sTyle hand BrUshesAnti-static coconut bristles.
no. description NET
706135 Bell-shaped, woven fiber mesh; 110 x 180 mm $ 12.41
706137 Wide, woven fiber mesh; 150 x 120 mm. 13.25
inspecTion mirrorno. description NET
707113 Violin / viola. Straight, but can be bent. $ 10.45
707111 Cello / bass 14.37
sTring Winders - drill aTTachmenTsno. description NET
707206 For guitar. $ 13.54
ZIPWINDER For bass. 19.50 707206
ZIPWINDER
fUlly adJUsTaBle violin WorK BaseThe wooden work base holds the violin firmly in place. This wooden base is attached to a swivel ball mounted in a metal base that can be attached to the workbench.
no. description NET
1624-1 Ball clamp support for wooden form and scroll clamp. $ 435.25
1624-2 Wooden scroll clamp. To be used with 1624-1, above. 93.75
1624-3 Wooden form for violin. To be used with 1624-1, above. 93.75
1624-4 Wooden form for viola. To be used with 1624-1, above. 120.90
1624-5 Wooden form for cello. To be used with 1624-1, above. 217.75
1624-1
1624-2
Ball clamp support pictured with violin form attached.
PAGE LAST UPDATED: 6-15-2009www.howardcore.comemail: [email protected] 279
739503
ALL TOOL PRICES ARE NET!!
Bridge marKerno. description NET707000 Marks string divisions on
bridge, 4/4 cello to 1/8 violin.
$ 55.85
sTring lifTers
The String Lifter is an ideal assistant for exchanging, adjusting and fitting bridges without detensioning the strings. Using the String Lifter avoids soundpost dropping and helps positioning the new bridge. The body is made of indestructible fiber-reinforced plastic with grooved support to match varying sizes. The legs are lined with elastic pads to protect the varnish of the instrument.
no. description NET739501 Violin 1/16 - 4/4; Viola 395 mm $ 25.06739502 Cello 1/8 - 4/4 34.44
Bridge leg expander
To simulate string tension when fitting cello bridges.
no. description NET706900 Solid brass $ 31.50706901 American made, lighter weight 9.60
706901
706900
herdim Bass sTring lifTerno. description NET739503 Designed exclusively for basses.
Top piece is serrated to match any string configuration.
$ 195.97
b r i d g e t o o l s
Bridge fooT fiTTers
For assisting in fitting the bridge feet to the top of the instrument.
no. description NETT7100 Violin / viola $ 26.40T7102 Cello 30.05
ORDER ONLINE !! www.howardcore.com
T7100T7102
739502739501
PAGE LAST UPDATED: 6-15-2009toll-free order line: 800.633.2302 toll-free fax line: 877.633.2302280
soUndposT gaUge
Fits through f-hole to measure the internal dis-tance between top and back.
no. description NET
700110 Violin & viola $ 8.70
700111 Cello 11.90
Bend - a - lighT
High intensity light tool with a flexible shaft which puts the light where you need it. The lens gives a brilliant, diffuse light which is ideal for illuminating the interior of violins or other instruments. Complete with extension cover and two batteries.
•length: 400 mm overall with 250 mm flexible shaft•max. diameter of the shaft: 5 mm•weight including batteries: 60 g
no. description NET
708001 BEND-A-LIGHT $ 21.00
708002 Replacement lamp
6.25
708004 Large Bend-A-Light for cellos & basses “Krypton-Pro”
35.00
708005 Replacement lamp for “Krypton-Pro” 13.95
708006 Replacement switch - fits both sizes 4.00
mini flex lighT UlTra
Small pocket-sized flex light with bright light and ultra-flexible shaft. Very useful. Uses two AAA batteries (included). In case.
no. description NET
708013 see above $ 33.37
708016 Replacement bulb
5.64
s o u n d p o s t t o o l s , i n s p e c t i o n l i g h t s
hill self-sUpporTing violin lamp
Comes with AC adapter (no batteries!). Will mount in any f-hole or endpin hole. Replaceable bulb.
no. description NET
708008 see above $ 35.00
700122
700124
700123
HERDIM FORTE SOUNDPOST SETTERS
Stainless steel with rounded edges. Stiff, yet still bendable. Traditional, English-style head is ideal for making fine adjustments in the postion of the soundpost. Excellent tapping power due to the hefty head, whose rounded flanks prevent soundpost damage.
no. description NET
700122 Violin / viola $ 20.00
700123 Cello 35.41
700124 Bass 42.74
soUndposT Tools
no. description NET
1 700100 5-notch, stainless steel. Violin. $ 36.00
2 700101 Violin, nickel-plated, American made 3.75
700101-C Cello, nickel-plated, American made 17.60
3 700103 Cello, chrome-plated. 31.08
700113 Violin/cello, American made, scissors-style. 8.70
9 700108 Soundpost retriever, to pull out loose sound-post, for violin.
7.65
700109 Soundpost retriever, cello 9.45
10 735900 Herdim soundpost setter, hand forged from old English design, rounded edges, finest workmanship, superbly balanced.
63.72
11 700118 Herdim Duo soundpost setter, double-layered head, nickel-plated. For violin/viola.
20.00
700114 Same as #700118 above, but for small sizes violin (1/8 - 3/4 sizes)
10.50
12 700105 Scissor-style, brass - violin & viola. 12.50
1
9
1011
2
3
12
DISCONTINUED
DISCONTINUED
DISCONTINUED
PAGE LAST UPDATED: 6-15-2009www.howardcore.comemail: [email protected] 281
c - clamps
no. description NET
705910 Strong steel clamp, ideal for cello and double bass lin-ings. Opening 17 mm, depth 30 mm, weight 41 g.
$ 8.20
T-BC01 Depth 90 mm, opening 25 mm. Double swivels, great for bass bars!
20.00
T-BC02 Depth 110 mm, opening 40 mm. Double swivels, great for bass bars!
25.00
c l a m p s
Berna carBon clamp - feaTherWeighT model
no. depth opening weight NET
705730 70 mm 40 mm 10 g $ 6.71
705731 70 mm 160 mm 11 g 8.43
705732 70 mm 210 mm 12 g 9.62
ALL TOOL PRICES ARE NET!!
705910
T-BC02
T-BC01
fingerBoard pads
no. description NET
735810 Rosewood clamping forms to be placed on the top of the fingerboard and the bottom of the neck when gluing the fingerboard to the neck. Set.
$ 7.95
735811 Same as above, for cello. 14.13
Japanese model maKer clamps
Slender brass clamps for gluing delicate work.
no. description NET
737005 5” $ 11.25
737006 6” 11.75
737012 12” 13.10
737012
737006
737005
705732
PAGE LAST UPDATED: 6-15-2009toll-free order line: 800.633.2302 toll-free fax line: 877.633.2302282
cracK cleaTing clamp
Extremely light aluminum clamp for cleating cracks. Screws brass, swivel with ball bearing (highly mobile).
depth: 125 mm, opening: 55 mm, weight approx: 75 g.
no. NET
705722 $ 35.28
repair clamps, alUminUm Light but strong clamps made of cast aluminum alloy. The foot is slightly elevated to concentrate the pressure and to work on concave surfaces. Steel rod with freely movable swivel in ball bearing.
no. depth opening weight NET
705890 95mm 35mm 110g $ 28.74
705891 120mm 40mm 120g 31.06
705892 160mm 40mm 220g 35.28
705893 200mm 50mm 290g 37.59
705894 Set, 5 pcs., 1 ea. 705890/92/93, 2 x 705891
152.86
mini - clamps
Light aluminum clamps, screws have gunmetal finish, plastic pads. 1 each: 25 x 32 mm, 30 x 43 mm, 37 x 56 mm.
no. description NET
705721 Set of 3 $ 14.72
c l a m p s
Bessey solid sTeel Bar clamps Forged, hardened arm is sturdy yet suprisingly compact and lightweight. Accurately machined bar and arm and hardened threads allow high precision clamping. Perfectly flat, ball-jointed swivel pad, galvanized arm, coated thread, wooden handle.
no. depth opening weight NET
705778 50 mm 100 mm 190 g $ 21.85
705779 50 mm 300 mm 280 g 28.44
705780 60 mm 120 mm 300 g 27.62
705781 80 mm 160 mm 500 g 33.19
705782 100 mm 200 mm 850 g 44.42
705783 120 mm 250 mm 1300 g 53.68
705784 120 mm 500 mm 2200 g 82.96
705785 120 mm 1000 mm 3500 g 118.89
705790 Protective strips (2) for Bessey clamps #’s 705780-2
10.81
705892
705890
705893
705891
Photos not to scale
705779705785
705790
705781705778
PAGE LAST UPDATED: 6-15-2009www.howardcore.comemail: [email protected] 283
no. description length NET ea.
705835 Violin/viola 280 mm $ 49.65
705836 Violin/viola 180 mm 49.65
705838 Cello 300 mm 75.78
705846 Cello/bass 500 mm 81.00
705845 Bass 880 mm 81.00
735847 Violin/viola w/ top removed 280 mm 99.77
735848 Violin/viola between the f-holes. 155 mm 49.65
735849 Violin/viola between the f-holes. 100 mm 49.65
735850 Better pressure distribution for repairing edges. 240 mm opening.
109.99
735849
735847
705838
705835
1
2
4
3
8
7
5
6
c l a m p s
“herdim” repair clamps
The finest professional clamps for musical instrument repair, furniture restoration, pat-tern making and other delicate clamping tasks.
Hand forged steel clamps of high stability and low weight, give well-defined pressure on the parts to be glued. High-pitch rods for fast closing action. Freely mobile brass swivels on ball bearings. All parts galvanized or made from corrosion free, non-staining material.
“herdim” cracK clamps
Made for violin, viola, cello and bass. The new HERDIM Crack clamp has all the features professional stringed instrument repairers have waited for:
• Adjustable, preset working length for quick, versatile use; only 2 sizes cover all applications• Twisting pad with convex and concave side to adapt to the contour of the instrument.• Double rod for high specific strength and flexibility.• With two sliding jack screws for leveling the crack without wedges.
No. 735847 has two sides for repairing a top which has been removed (pressure can be equalized both above & below.)No. 735848 & 735849 clamp between “F” holes.
735850
parallel clamp
Strong steel clamp. Opening 28 mm, depth 50 mm.
no. NET
705723 $ 18.00
no. depth opening weight application NET3 735714 40 mm 35 mm 40 g crack-cleating, edging, f-holes,
ribs$ 29.87
4 735715 90 mm 35 mm 80 g crack-cleating, ribs 32.675 735702 85 mm 45 mm 125 g crack-cleating 39.196 735704 135 mm 45 mm 235 g bass bar, violin, viola 40.037 735707 205 mm 45 mm 330 g crack-cleating cello, finger-
board guitar50.30
735709 50 mm 80 mm 110 g fingerboard violin/cello 47.04735711 150 mm 80 mm 255 g top/back (plaster repair
method)62.06
8 735713 300 mm 80 mm 700 g crack-cleating bass, top/back cello (plaster repair method)
69.24
1 735719 22 mm 12 mm 11 g micro size clamp 26.132 735718 27 mm 15 mm 18 g micro clamp 27.43
PAGE LAST UPDATED: 6-15-2009toll-free order line: 800.633.2302 toll-free fax line: 877.633.2302284
clip clamp
Steel, zinc plated, extra strong spring. Length 110 mm, opening 40 mm.
no. NET
705861 $ 5.87
repair clamps
4 parts, straight steel-tension rods with polyamid cramps; flexible.
no. NET
705830 Violin $ 42.65
705831 Cello 72.60
705832 Bass 72.97
edge clamps
For edge repair.
Brass; 2 brass screws; depth 15mm, opening 12 mm.
no. NET
705855 $ 22.57
Brass; 1 brass screw; depth 18mm, opening 15 mm.
no. NET
705856 $ 18.24
Brass. Precisely machined.
no. NET
T-2700 $ 65.00
Top clamp
For gluing down the top underneath the fin-gerboard. Machined aluminum. Protective lining.
no. NET
705820 Violin and viola $ 45.45
705821 Cello 53.85
“herdim” end pin clamps A truly genial clamp for gluing back loose ribs to the lower block without opening the instrument. After the pivot is inserted through the end pin hole, the rod turns by gravity into the cross position. The pad, made from rubber-lined hardwood, has two archings to adapt to different shapes.
Simple, time saving and functional!
no. NET
735800 Violin $ 13.90
735801 Cello 26.25
c l a m p s
violin panel clamp
Traditional clamp for gluing 2-piece tops & backs of violins in a warp-free manner. Wooden screw allows clamp to be set quickly & accurate-ly. Clamping arms confrom to the shape of the wood being clamped. Max. opening 350 mm; board width 28 mm. Made of high quality hard-wood.
no. NET
705750 $ 108.14
fingerBoard glUing clamp
no. NET
705870 Plastic. For violin, viola and cello.
$ 5.00
T-46017
cracK clamps
no. description NET
T2100A Edge clamp - draws cracks together at bot-tom edge; American made.
$ 37.00
T-46017 Most precise clamp cut from titanium & brass – only half as heavy as all brass but more stable! Four screws for best clamping. Exceptional quality.
147.13
T-46017-B Like above, for bass. 196.15
705855
705856
T-2700
ORDER ONLINE !! www.howardcore.com
T-2100A
PAGE LAST UPDATED: 6-15-2009www.howardcore.comemail: [email protected] 285
“herdim” assemBly clamps
Gluing the table to the ribs of stringed instruments is a delicate procedure because of the risk of pressure marks and edge chipping. HERDIM Assembly Clamps are designed to eliminate that danger. Their pads go over the ridge of the edge of the violin or cello and exert pressure exactly where it is needed - directly over the rib to avoid any damage to the edge. Because of the precise application the necessary clamp pressure can be considerably reduced, compared to conventional clamps. The material used is glue repelling, non-aging and elastic to avoid pres-sure marks. The pads are parallel pin guided in a mortice for fast closing action.
VIOLIN / VIOLA
pads:polyurethane, brass bushingsrod: steel, galvanizednut: brass
no. color NET
735601 Blue $ 14.37
735602 Red 14.37
735603 Yellow 14.37
735600 Set - 32 pcs. (blue - 20; red - 8; yellow - 4)
433.75
CELLO
Precision clamps for cello assembling and repair. Similar to violin version but, due to higher load requirements, the jaws of the cello clamps are made from fiber-reinforced plastic. Herein elastic pads are inserted for an ideal synthesis of strength and surface protection without adding to the weight. The rod is mantled by a silicon tube to protect the edges of the instrument.
pads: fiber reinforced polyamide, brass bushingsrod: steel, galvanizednut: brass
no. color NET
735631 Blue $ 20.54
735632 Red 20.54
735633 Yellow 20.54
735630 Set - 42 pcs. (blue - 28; red - 8; yellow - 6)
808.71
herdim riB corner repair clamps
For re-gluing rib corners. Allows precise pressure to be applied directly to both sides of the rib corner.
no. NET
735610 Violin/viola. Opening 50 mm, 4 spindles.
$ 123.05
735615 Cello. Opening 150 mm, 6 spindles.
156.59
735621 Clamp body, without assembly clamps. Includes 2 knurled nuts
28.62
herdim laTeral clamp spindles
The ideal device for applying lateral pressure to the rib area, e.g. for leveling and properly aligning cracked ribs. To be used in conjunction with Herdim Assembly Clamps, above. Spindle with adjustable clamping pad and two locking screws.
no. NET
735605 $ 27.08
735610
735615
c l a m p s
735621
f-hole clamps
Fit through the f-hole for cleating cracks without removing the top. Stainless steel profile, steel screw, gun metal finished, leather padded.
no. depth opening NET
705801 30mm 30mm $ 10.90
705802 50mm 30mm 10.90
705803 80mm 30mm 10.90
705804 100mm 30mm 10.90
705800 Set: 4 pcs. (no. 705801-04) 43.40
PAGE LAST UPDATED: 6-15-2009toll-free order line: 800.633.2302 toll-free fax line: 877.633.2302286
ALL TOOL PRICES ARE NET!!
3-Way clamp for violin
Light weight machined aluminum clamp for gluing top down on violin or viola. Swiveled, leather padded tightening screws on top and bottom. Side screw used to properly position rib in case of bulging.
no. NET
T5011 $ 14.70
glUing clamps
no. NET/ea.
705704 Cello & guitar $ 43.55
705705 Bass 43.55
705706 Violin $ 6.83
705707 Cello 8.05
705708 Bass 16.48
paTching clamp
Lightweight machined aluminum, black anodized finish. Four inch throat with leather padded swivels.
no. NET
PC1500 $ 21.55
Wood screW clamps
Individual wood screw clamps, leather pads, nickel plated rod.
no. NET
T2110AV Violin / viola $ 1.85
T2110AC Cello 3.15
T2110AB Bass 7.40
c l a m p s
resonaTor clamp
For gluing the resonator.
no. NET
735765 $ 89.08
glUing clamp seTs
Hardwood pads with rubber lining.
no. NET
705700 Violin, 6 parts $ 205.57
705701 Cello, 6 parts 339.72
705706705705
PAGE LAST UPDATED: 6-15-2009www.howardcore.comemail: [email protected] 287
T 4919
T 49
STRAD T45 GUARNERI
T4921NB
T4921BB
p a t t e r n s , f o r m s & p u r f l i n g t o o l s
pUrfling groove cUTTer
Precisely machined from a solid brass bar.
no. description NET
702522 0.5mm blade, precision adjustable. $ 192.05
702523 Set of two blades for 702522 23.52
700603 American made with rosewood handle, Ibex.
38.55
700604 Set of two (2) replacement blades for #700603.
9.30
paTTerns
no. description NET
T43 Graduation and outline diagram. Specify Strad. or Guarneri model.
$ 1.25
T44 F-hole pattern, PVC. Specify Strad. or Guarneri model.
5 .00
T45 F-hole pattern, brass. Specify Strad. or Guarneri model.
62.00
T4921N Neck pattern, PVC. 7.35
T4921NB Neck pattern, brass.Specify Strad. or Guarneri model.
62.00
T4924 Body pattern, PVC. Specify Strad. or Guarneri model.
3.80
T4921BB Body pattern, brass. Specify Strad. or Guarneri model.
70.27
T4919 Neck angle gauge. 9.20
T49 Complete form, wood. Specify Strad. or Guarneri model.
165.33
pUrfling channel cleaner
no. description NET
700605 With wooden handle, American made. $ 8.05
700606 Hardened & polished steel, German made. 16.48
700603
702522
herdim Bridge/fingerBoard paTTerns
Precision patterns with tapered spurs at base of bridge patterns for gauging string height. 6-piece set for vln, vla, & cello. 0.5 mm thick stainless steel. Sizes according to Hans Weisshar.
no. NET
739400 $ 77.08
ALL TOOL PRICES ARE NET!!ORDER ONLINE !!
www.howardcore.com
700605
700606
PAGE LAST UPDATED: 6-15-2009toll-free order line: 800.633.2302 toll-free fax line: 877.633.2302288
T 105
701110
f hole drillThe ideal tool for cutting perfectly cylindrical f-holes. Centered drill bit with beech-wood handle. Ten interchangeable double beveled drill bits. Set complete with all bits.
no. description NET
701110 Violin / viola. Bits Ø: 5.5 / 6 / 6.5 / 7 7.5 / 8 / 8.5 / 9 / 9.5 / 12mm
$ 118.89
701109 Cello. Bits Ø: 12 / 12.5 / 13 / 13.5 / 14 / 18 / 18.5 / 19 / 19.5 / 20 mm
147.63
Bending ironsUniversal bending iron for violin, viola, cello & guitar. Rheostat control. Cast aluminum oval shape, mounts horizontal or vertical.
no. description NET
T105 Universal bending iron for violin, viola, cello & guitar. Rheostat control. Cast aluminum oval shape, mounts horizontal or vertical. 110V, 200W. 4 lbs.
$ 156.65
703912 Bending straps for use with T105, above. Violin / viola. For pressing the ribs against the bending iron. Made of highly flexible, 0.3 mm thick stainless steel fitted with a wire handle on each end. 50 mm x 320 mm.
31.35
703913 Bending straps for use with T105, above. Cello / guitar. 125 mm x 460 mm. 65.32
SEE MORE BENDING IRONS FROM GEWA IN THE FRONT OF THIS TOOL SECTION!!
f - h o l e d r i l l & b e n d i n g i r o n , b o w m a k e r t o o l s
BoWmaKer - chiselsSpecial flat mortice chisels with short blade (50 mm) and tapered cross-section for the head and frog cavities of bows
with pearwood handle.
no. size NET
701501 2 mm $ 31.06
701502 3 mm 31.06
701503 4 mm 31.06
701504 5 mm 31.06
High grade Swiss carbon steel, super- finished & polished.
Hardness 6 HRC.
BoW rehairing Tools
no. description NET
706301 Set of three parts $ 117.11
BoW rehairing clamp
no. description NET
706302 Wood, holds bow securely while rehairing all size bows.
$ 48.00
Tools for BoW TipsAluminum. For violin, viola and cello.
no. description NET
705305 Bending clamp $ 77.20
706306 Gluing device 112.83 705305 706306
PAGE LAST UPDATED: 6-15-2009www.howardcore.comemail: [email protected] 289
739410
herdim hair gaUge
For measuring the precise amt. of hair needed for tying a given hank. Stainless steel w/ slit & graduation scale. Suitable for all size hanks.
no. NET
739410 $ 19.60
250 gram scale
no. description NET
JS250 Bass Bow Scale. Measures from 300 grams down to 0.1 grams.
$ 39.00
120 gram scale
no. description NET
M120Z Violin, Viola & Cello Bow Scale Measures from 400 grams down to 0.1 grams. Cover serves as convenient tray!
$ 29.70
M120Z
JS250
b o w m a k e r t o o l s
ALL TOOL PRICES ARE NET!!
horn BoW hair comB
Combing bow hair prior to use helps guarantee that the hair in the hank remains straight and parallel. These combs have cleanly cut teeth and are made of natural horn. Overall length 90 mm.
no. comb length (toothed portion) NET
739411 50 mm $ 6.54
739412 85 mm 7.84
739412
739411
ORDER ONLINE !! www.howardcore.com
Great for weighing bows!