How To Install Roller Blinds?How To Install Roller Blinds?

Roller Blinds InstallationRoller Blinds Installation

● Installing a roller blind is a project anyone can Installing a roller blind is a project anyone can tackle , even if the blind has to be cut to fit.tackle , even if the blind has to be cut to fit.

● If you can use a screwdriver and can drill a hole , If you can use a screwdriver and can drill a hole , you're ready. you're ready.

● Here are some basic guidelines for roller blinds Here are some basic guidelines for roller blinds installation. installation.

1. Buy A Blind1. Buy A Blind

Buy a ready-made blind to fit the window or get Buy a ready-made blind to fit the window or get one slightly larger which will need cutting to size.one slightly larger which will need cutting to size.

2. Mark a level line2. Mark a level line

Mark the level line Mark the level line where it is going where it is going to sit. Ideally this to sit. Ideally this should be should be positioned about positioned about 4–5 centimeter 4–5 centimeter above the above the window.window.

3. Install the brackets

Check that each bracket is on the correct side , because they are usually different at each end.

4. Finish Up

● Slide the blind into place on the brackets and Slide the blind into place on the brackets and check that it is sitting straight and that the length check that it is sitting straight and that the length is good.is good.

● Pull the blind up and down to check that the cord Pull the blind up and down to check that the cord or other mechanism is working properly.or other mechanism is working properly.

Thank YouThank You

● For More DetailsFor More Details

● Please Visit - Please Visit -

● http://www.blindandshutterwarehouse.co.ukhttp://www.blindandshutterwarehouse.co.uk