How To Install OS X Mavericks Hackintosh On PC [Tutorial]

Requirements:

Access to Mac for downloading OS X Mavericks from MAS and creating UniBeast drive.

8GB+ USB flash drive.

An Intel based PC capable of running Mavericks.

Guide on how to install OS X Mavericks Hackintosh on your PC:

Step 1: On your Mac, download OS X Mavericks for free from the Mac   App   Store . Make sure the

downloaded installation file is in /Applications folder.

Step 2: Download the latest version of UniBeast and MultiBeast from (http://www.tonymacx86.com/downloads.php?do=cat&id=3).

Step 3: Format your USB flash drive using Disk   Utility  on Mac with the following settings:

Start Disk Utility on Mac. Select your USB drive from the left   hand   column .

Select the Partition tab from the right side. Click on Current dropdown menu and choose1

Partition.

Now click on Options… button, select Master Boot Record.

Type ‘USB’ as the Name for the drive. Select Mac   OS   Extended  (Journaled) as Formattype.

Once done, click on Apply followed by Partition.

Step 4: Now start UniBeast that you downloaded in Step 2 above.

Step 5: Skip through the first few screens by clicking Continue or Agree, until you get to Destination

Select screen.

Step 6: Select your USB drive and click Continue to proceed.

Step 7: On Installation Type screen, make sure Mac   App  Store Mavericks – 10.9 is selected in

packages. Additionally, select Legacy USB Support if you are using an old system with Socket 1156.

Select Laptop Support package if you are installing it on a notebook PC. Once done, clickContinue,

enter admin password for your Mac if prompted, and let UniBeast make a bootable Mavericks

hackintosh USB flash drive for your PC.

Once done, move MultiBeast file that you downloaded in Step 2 above to this bootable Mavericks

hackintosh USB drive (you will need this later).

Step 8: Now insert this bootable Mavericks hackintosh drive in your PC. Make sure the BIOS is set to

boot the system from USB devices. When you boot from the USB drive, you will see Chimera boot

screen, select “USB” and hit Enter on keyboard to continue.

Step 9: Once you are into OS X installer, you need to format the HDD you want to install Mavericks to

using Disk Utility with the following settings:

On the menu   bar , click on Utilities, then start Disk Utility.

Select the HDD you want to install OS X to from left hand side.

From right side, click on Partition tab, then click on Current dropdown menu and choose 1

Partition.

Now click on Options… button, choose GUID Partition Method.

Type ‘Macintosh HD’ as the Name for HDD. Select Mac OS Extended (Journaled) asFormat type.

Click on Apply followed by Partition to partition the drive.

Step 10: Once done, close the Disk Utility program, go back to the installer. Select “Macintosh HD” as

the drive you want to install OS X to.

Click on Install for the installation to begin.

You’re almost there! Once the OS   X   installation  is complete, you need to make this HDD bootable. This

can be done using MultiBeast utility. MultiBeast can not only make OS X HDD bootable, but can also

install the required drivers for audio, WiFi, graphics, LAN and more.

Step 11: Reboot your system again using the bootable Mavericks hacktintosh flash drive. From the

Chimera boot screen, select “Macintosh HD” this time.

Step 12: Start MultiBeast, from here, choose all the drivers required for your PC. Once done, click on

Build followed by Install to complete the installation.

That’s it! You now have fully working OS X Mavericks installed on your PC.