How to bridge a Comtrend 3030

1. Click “Basic Setup” on top bar then “WAN Setup” in left bar.

1. Click the Add button at the bottom of the screen.

2. Click the atm/(0_0_35) option from the drop box. Then click next

3. Click the bridging radio box, then hit the next button

4. Click Apply and save

5. Click the Add button at the bottom of the screen.

6. Click the ptm/(0_1_1) option from the drop box. Then click next

7. Click the bridging radio box, then hit the next button

8. Make sure the customer has the correct settings (PPPoE Information {username/Password}) in his router prior to the next step.

9. Click the Remove radio boxes for the ppp1.1 and ppp0.1 interfaces (leaving only the br_0_1_1 and the br_0_0_35 interfaces. then hit remove at the bottom.

10. Go to Management Tab and click reboot. (sometimes boots you out before you can do this step)