www.scrollsawworkshop.blogspot.com Digital Patterns Designed by Steve Good Home of Scroll Saw Pattern Printer and the Scroll Saw Key Chain Printer Copyright Steve Good 2009 [email protected]Note to commercial print employees: I give my permission to print as many of this pattern book as your customer requires.
Note to commercial print employees: I give my permission to
print as many of this pattern book as your customer requires.
Hourglass
Finish all pieces before assembly.During assembly insert the
nipples on the top andbottom of the glass tightly in the holes
drilled in thetop and bottom wood pieces. Center everything upand
make sure the feet at both ends are level so itsit flat. Use rubber
band as clamps until the glue dries.
Thick
Thick
1/4 deep hole for glass nipple. diameter drill bit.
1/4 deep hole for glass nipple. diameter drill bit.
Top/Bottom
Dont over cut the slots. You want the posts tofin snug.
