Upload
jennifer-green
View
222
Download
0
Embed Size (px)
Citation preview
8/9/2019 Hot Clash Tutorial
1/25
1 | P a g e
Description: Performing Operational Clash Detection
Product: AutoPIPEVersion Number: V8i (v9.6)Submitted by: SMRevision: 0.4
Table of Contents
Description: Performing Operational Clash Detection ........................................................... 1
Table of Contents ......................................................................................................... 1
Clash Detection Workflow .............................................................................................. 2
Open AutoPIPE Model ................................................................................................ 5
Analyze for Gravity, thermal, 4 seismic loadings ............................................................ 6
Export to DGN using (File > Export > DGN Model (*.dgn)) ............................................ 11
Open DGN model in Navigator and Perform Clash Detection .......................................... 13
To Create a Clash Markup ......................................................................................... 21
8/9/2019 Hot Clash Tutorial
2/25
2 | P a g e
Clash Detection Workflow
Open Existing AutoPIPE Model
Analyze for Gravity, thermal, 2seismic loadings
Export to DGN
(File > Export, Select LoadCombination)
Open DGN model
Show all insulation in the model inorder to export it
Create a new clash detection job
Apply appropriate tolerances, levels
and rules
Create a clash markup with the
clash results
Bentl
eyAu
toPIPE
Be
ntleyNa
vigator
8/9/2019 Hot Clash Tutorial
3/25
3 | P a g e
8/9/2019 Hot Clash Tutorial
4/25
4 | P a g e
8/9/2019 Hot Clash Tutorial
5/25
5 | P a g e
Open AutoPIPE Model
Open Model PIPMALL1A_STR_FINAL_V94_SMALL_Z.DAT
8/9/2019 Hot Clash Tutorial
6/25
6 | P a g e
Analyze for Gravity, thermal, 4 seismic loadings
Load > Static Analysis Sets
Analyze > Static
8/9/2019 Hot Clash Tutorial
7/25
7 | P a g e
Any of the AutoPIPE non-code combinations can be displayed on screen and exported to Bentley
Navigator for check Clash detection
Tools > Combinations (Select non-code combinations)
8/9/2019 Hot Clash Tutorial
8/25
8 | P a g e
Generate an output report to determine areas of maximum displacement
Result > Output Report
Check the maximum displacements in X, Y, Z directions as possible areas of clashes
8/9/2019 Hot Clash Tutorial
9/25
9 | P a g e
View displacement plot at point C12F for GRT1E3{1} load combination
8/9/2019 Hot Clash Tutorial
10/25
10 | P a g e
High DY displacement = -4.214 in at C12F (Possible clash between 2 pipes)
8/9/2019 Hot Clash Tutorial
11/25
11 | P a g e
Export to DGN using (File > Export > DGN Model (*.dgn))
Hint: Show the insulation defined in the model (View > Show Options > Pipe Insulation) to
include the additional thickness when exporting for clash detection.
Select Deflected Model Graphics and choose the GRT1E3{1} load combination
8/9/2019 Hot Clash Tutorial
12/25
12 | P a g e
DGN file is created in same folder as the DAT model file
8/9/2019 Hot Clash Tutorial
13/25
13 | P a g e
Open DGN model in Navigator and Perform Clash Detection
Microstation or Navigator can be used to run clash detection
8/9/2019 Hot Clash Tutorial
14/25
14 | P a g e
Open Navigator and Select DGN Model PIPMALL1A_STR_FINAL_V94_SMALL_Z.dgn
8/9/2019 Hot Clash Tutorial
15/25
15 | P a g e
Run the CLASH detection
Define a new job called Clash1
8/9/2019 Hot Clash Tutorial
16/25
16 | P a g e
Job > Advanced Settings
Criteria TAB and Select Levels Task
Click on 2 levelsSEG_C_STRESS_MESH_DEFLECTED and SEG_D_STRESS_MESH_DEFLECTEDAnd drag to Set A box
Note: Alternatively, select the items from the Plant model you want to clash with, e.g. Structure,Equipment, etc., and add them to Set A (Red). The deflected AutoPIPE piping models can be
selected for Set B (Blue) from the referenced-in stress models.
Select the Self check
8/9/2019 Hot Clash Tutorial
17/25
17 | P a g e
Under Rules, define a new Rule Suppress clashes within the same level i.e. on same segment
or line number
Click Process button
8/9/2019 Hot Clash Tutorial
18/25
18 | P a g e
Five (5) hard clashes are found
8/9/2019 Hot Clash Tutorial
19/25
19 | P a g e
8/9/2019 Hot Clash Tutorial
20/25
20 | P a g e
8/9/2019 Hot Clash Tutorial
21/25
21 | P a g e
To Create a Clash Markup
Create a markup for clash 2, click on the markup icon
A Markup name Clash2_Clash1 is created
Or click the Task Create Clash Markup
8/9/2019 Hot Clash Tutorial
22/25
22 | P a g e
Select from the menu Review > Markup > Markups dialog
8/9/2019 Hot Clash Tutorial
23/25
23 | P a g e
Add a new comment
8/9/2019 Hot Clash Tutorial
24/25
24 | P a g e
Double click the Clash2_Clash1 row to redline the markup
8/9/2019 Hot Clash Tutorial
25/25
25 | P
Click the Print to PDF button to create a markup PDF