hoods

L o w - C o s t S o l u t i o n s f o r H i g h - Te c h I n d u s t r i e s

© Copyright 2011 Terra Universal, Inc. Vol. 8, No. 13

HOODS& LAB EQUIPMENT

NOTE: All prices and specifications are subject to change without notice. Crating charges apply to selected items. Call for information.

© 2011 Terra Universal, Inc. All rights reserved.Printed in USA 073011

Digital Control Panel• Filter/Fan Unit• Light• Backpressure Alarm• Access Shield

Side Panelsensure effective laminar flow

Work Surfaces*available in many sizes and materials.

Two-piece design isolates FFU vibration.

MotorizedSliding Shield*extends 3"-25" below hood to restrict access to work area and improve system efficiency. Rated for millions of operations!

Modular Cleanroom Drawers*—select stainless steel or plastic

*System option

Fluorescent light standard; UV sterilization bulbs available

• EconomicalsystemprovidesalaminarflowofHEPA-filteredairtomeetthemostcriticalcontaminationrequirements

• Incorporatesindustry-leadingquiet,low-vibrationfan/filtermodules

• All-stainlesssteelorpowder-coatedsteelconstructioniscleanroomcompatibleandeasytoclean

• Sidepanelsandoptionalmotorizedfrontslidingshieldeffectivelycontrolthelaminarairstreamtoachievetheairspeedyourequire

• Fluorescentilluminatorsensureeasyviewing

• Backpressuregaugewithaudiblealarmhelpsmonitorfilterperformance

• OptionalionizationequipmentsafelyneutralizesstaticchargesthroughouttheworkareaforeffectiveESDandparticlecontrol

• AccommodatesstandardTerraworkbenchesinmanymaterials,aswellasstandardTerrawetprocessingstations(seepage23)

Terra Universal’s Vertical Laminar Flow Station combines several of our most advanced products in a state-of-the-art work station that removes particulate air-borne contamination.z

Free-Standing Vertical laminar Flow StationS

IonBar™—Safestaticcontrol!Seepage7

Stripshieldaccesscurtain*

FanFilterUnits

230V,50Hzmodelsavailable

OrderingInformationOrder the Vertical Laminar Flow Station, Filter/Fan Units (FFUs), and other optional accessories separately from the charts below. Selected accessories are installed in the corresponding Vertical Laminar Flow Station and shipped as a turnkey system, ready for operation.

SlidingShieldWithMotorizedControlAutomatically extends and retracts at the press of a button. Static-dissipative PVC eliminates static and particle attraction. Includes installation of clean-operating brushless motor and safety mechanism that stops shield in the event of power failure. Order shield separately.

91"

69"

35"

32"

B A

Filter/FanUnits(FFUs)115VAC,60Hz*SeechartbelowforquantityrequiredNominalDim.W x L

[email protected]

HEPAFFU IonizingBar**

cat. # $/each cat. # $/each2' x 4' 717 CFM 6601-24-H 740.00 2005-49 771.002' x 3' 602 CFM 6601-23-H 740.00 2005-48 675.002' x 2' 558 CFM 6601-22-H 740.00 2005-47 563.00

* ULPA versions also available. For 220VAC model, add “220” to the part number.

** Includes installation kit for easy attachment to FFU. Ionizing Kit and FFU must be ordered together.

VerticalLaminarFlowStation SidePanel* MotorizedSlidingShield

Dimensions(inches)

No.ofFFUsrequired

(orderabove)

304StainlessSteel(OrderFFUsand

Benchesseparately)

PowderCoatedSteel(OrderFFUsand

Benchesseparately)

StaticDissipativePVC

StaticDissipativePVC

120VAC, 50/60Hz

220VAC, 50Hz

120VAC, 50/60Hz

220VAC, 50Hz

A B CxD cat. # cat. # $/each cat. # cat. # $/each cat. # $/each cat. # $/each52 49 48 x 30 (1) 2' x 4' 2001-30A 2001-30A-220 5,614.00 2001-80A 2001-80A-220 3,950.00 2004-03 154.00 9207-04 1,630.0064 61 60 x 30 (1) 2' x 2' + (1) 2' x 3' 2001-31A 2001-31A-220 6,314.00 2001-81A 2001-81A-220 4,541.00 2004-03 154.00 9207-05 1,856.0076 73 72 x 30 (2) 2' x 3' 2001-32A 2001-32A-220 6,614.00 2001-82A 2001-82A-220 4,831.00 2004-03 154.00 9207-06 2,085.00

100 97 96 x 30 (2) 2' x 4' 2001-33A 2001-33A-220 7,514.00 2001-83A 2001-83A-220 5,630.00 2004-03 154.00 9207-07 2,369.00* Replaces standard plexiglass side panels (each station requires two). Static-Dissipative PVC is recommended on units equipped with optional

dissipative sliding shield.

CleanroomDrawersNo.ofDrawers

Min.DrawerHeight

ABSPlastic(white)

304StainlessSteel

cat. # $/each cat. # $/each1 3" 1740-23 159.00 — —1 6" 1740-02 168.00 1741-20 215.001 12" 1740-98 207.00 1741-21 291.002 3", 6" 1740-14 327.00 — —2 6", 6" 1740-15 337.00 1741-22 429.002 6", 12" 1740-06 376.00 1741-23 506.003 3", 6", 12" 1740-07 508.00 — —3 6", 6", 6" 1740-09 505.00 1741-24 645.004 3", 3", 6", 6" 1740-08 655.00 — —

CorrespondingSolidTopWorkBenches† Perforated-TopWorkBenches†Dimensions

(inches)Nonconductive

TopConductiveTop 304Stainless

SteelTopPolypropyleneTop 304Stainless

SteelTop304StainlessSteel(Polypropylene

Plenum)A B CxD cat. # $/each cat. # $/each cat. # $/each cat. # $/each cat. # $/each cat. # $/each52 49 48 x 30 1722-00 609.00 1728-00 943.00 1521-45 1,109.00 1522-00 914.00 1522-56 1,412.00 1526-50 2,586.0064 61 60 x 30 1724-00 670.00 1730-00 966.00 1751-00 1,198.00 1522-01 956.00 1522-57 1,521.00 1526-51 2,901.0076 73 72 x 30 1726-00 680.00 1732-00 1,009.00 1752-00 1,257.00 1522-02 982.00 1522-58 1,741.00 1526-52 3,179.00

100 97 96 x 30 2402-00 813.00 2400-00 1,169.00 1753-00 1,349.00 1522-04 1,139.00 1522-60 2,087.00 1526-54 3,929.00* Powder-coated adjustable-height frame; top of material indicated.

Anti-MicrobialCoatingsAvailable!—AskaboutTerra’slatestinnovationforasepticprocessing.

1To Order, Call 714-578-6000 or Fax 714-578-6020 Vol. 8 No. 13

UV-CSanitationLightThis economical, fast-acting system uses UV-C light to kill 99+% of bacteria and viruses in minutes. An effective, convenient alternative to manual alcohol sterilization of difficult-to-reach areas.Seepage6fororderinginformation.

ValuLine™VerticalLaminarFlowStation—304StainlessSteelDimensionsWxDxH

No.ofFFUsincluded

304StainlessSteel120VAC,50/60Hz 220VAC,50Hz

cat. # cat. # $/each52" x 32" x 90" (1) 2' x 4' 2001-65 2001-65-220 5,735.0076" x 32" x 90" (2) 2' x 3' 2001-66 2001-66-220 6,471.00

100" x 32" x 90" (2) 2' x 4' 2001-67 2001-67-220 7,453.00

ValuLine™VerticalLaminarFlowStation—Powder-CoatedSteelDimensionsWxDxH

No.ofFFUsincluded

Powder-CoatedSteel120VAC,50/60Hz 220VAC,50Hz

cat. # cat. # $/each52" x 32" x 90" (1) 2' x 4' 2001-68 2001-68-220 4,211.0076" x 32" x 90" (2) 2' x 3' 2001-69 2001-69-220 4,752.00

100" x 32" x 90" (2) 2' x 4' 2001-70 2001-70-220 5,524.00

Valuline™ Vertical laminar Flow work StationSTerra’snewValuLineWorkstationsprovidealow-costsolutionforlaminarflowapplications—

• HEPAfanmoduleprovideslaminarflowofparticle-freeair(measuredat0.3µmparticles)tomeetcleanroomrequirements–99.999%efficientULPAfiltersalsoavailable

• Differentialpressuregaugemonitorsfilterbackpressure

• Tilt-upstatic-dissipativePVCsashenhanceslaminarflow,allowsintroductionoflargeprocessequipment

• Built-in304stainlesssteeltableprovidesaclean,chemical-resistantworksurface

• Removabletopforeasytransferthroughstandarddoorway

• Includesfluorescentlight,GFIduplexpoweroutlet

This economical free-standing workstation provides a particle-free environment for contamination-sensitive work. Select powder-coated or stainless steel construction. Dissipative PVC side panels help maintain a laminar flow of HEPA filtered air, and the tilt-up dissipative PVC sash lets the operator adjust the access area.

All models include HEPA fan/filter module(s), 0-3" WG filter backpressure gauge, tilt-up sash, a stainless steel work surface and a GFI duplex power outlet.

IonizingBarThis low-voltage device enhances ESD and particle control by safely neutralizing static charges. Includes installation in selected hood (not for retrofitting). 220V models available at TerraUniversal.com.

ForHoodWidth

Qty.Req’d. cat. # $/each

52" 1 2005-49 771.0076" 2 2005-48 675.00

100" 2 2005-49 771.00

No.2001-65

FanFilterUnits


2 Thousands of Critical Environment Solutions: www.TerraUniversal.com

Valuline™ Horizontal laminar Flow workstationsTerra’s ValuLine™ now includes a horizontal laminar flow workstation—• Fanmodulesincludes99.99%efficient

HEPA filter to ensure clean working conditions

• Differentialpressuregaugemonitorsfilterbackpressure

• Tilt-upsashisfabricatedofchemical-resistantstatic-dissipativePVC

• Stainlesssteelworksurfaceiseasytoclean and sterilize

• IncludesfluorescentlightandGFIduplexpoweroutlet

HorizontalLaminarFlowStation–All304StainlessSteelDimensions,InchesOverallHeight:63.4" No.ofFFUs

included120VAC,50/60Hz 220VAC,50/60Hz

Overall Width

Overall Depth

Working Area (WxDxH) Cat. # $/each Cat. # $/each

52" 44" 48.5" x 29.6" x 29.9" (1) 2' x 4' 2100-84 5,964.00 2100-84-220 6,064.0076" 44" 72.5" x 29.6" x 29.9" (2) 2' x 3' 2100-85 6,730.00 2100-85-220 6,830.00

100" 44" 96.5" x 29.6" x 29.9" (2) 2' x 4' 2100-86 7,751.00 2100-86-220 7,851.00

HorizontalLaminarFlowStation–Powder-Coated(white)FrameandStand;304StainlessSteelInterior(shownabove)Dimensions,InchesOverallHeight:63.4" No.ofFFUs

included120VAC,50/60Hz 220VAC,50/60Hz

Overall Width

Overall Depth

Working Area (WxDxH) Cat. # $/each Cat. # $/each

52" 44" 48.5" x 29.6" x 29.9" (1) 2' x 4' 2100-88 4,379.00 2100-88-220 4,479.0076" 44" 72.5" x 29.6" x 29.9" (2) 2' x 3' 2100-89 4,942.00 2100-89-220 5,042.00

100" 44" 96.5" x 29.6" x 29.9" (2) 2' x 4' 2100-90 5,745.00 2100-90-220 5,845.00

Terra’s ValuLine™ Horizontal Laminar Flow Workstation provides a particle-free environment for work with bio/pharmaceutical samples, medical devices, semiconductor components, and other sensitive materials.

Its rear-mounted fan/filter unit delivers a constant flow of HEPA-filtered air to wash away contaminants. Variable speed control lets you adjust speed setting up to 100+ feet/minute and to balance units with dual fans. The dissipative PVC sash tilts down to protect the operator’s face during operation. Select powder-coated or stainless steel construction. All systems are 63.4”H..

All models include HEPA fan/filter module(s), 0.3”WG filter backpressure gauge, tilt-up sash, a stainless steel work surface and a GFI duplex power outlet. Select size and choice of materials below..

No.2100-88

FanFilterUnits



HorizontalLaminarFlowStation(orderfiltersseparately) FiltersOverall

Dimensions*(W" x D" x H")

Work AreaDimensions*

(W" x D" x H")

No.ofFFUsrequired

(order at right)

HorizontalLaminarFlow:InteriorMaterial** HEPAFilter/FanUnits***304StainlessSteel ElectropolishedSS Size

(W x L)Cat. # $/each Cat. # $/each Cat. # $/each52 x 44 x 63 48 x 30 x 28 (1) 2' x 4' 9620-63 9,100.00 9620-66 11,188.00

2' x 4' 6601-24-H 740.0076 x 44 x 63 72 x 30 x 28 (2) 2' x 3' 9620-64 10,979.00 9620-67 12,633.002' x 3' 6601-23-H 740.0088 x 44 x 63 84 x 30 x 28 (1) 2' x 4' & (1) 2' x 3' 9620-65 11,391.00 9620-68 13,592.00

Note: All models are 115VAC, 50/60Hz. For 220VAC, 50Hz, add “-220” to the part number.* All dimensions are nominal. ** Work top and side panels are of the material indicated. All exterior surfaces are powder-coated CR steel.*** 99.99% efficient @ 0.3 micron particles. ULPA filters also available.

Horizontal laminar Flow station ConfigurationGuideat TerraUniversal.com• Theidealprocessingenvironment

forcontamination-sensitivematerials

• Dualmulti-speedfilter/blowermodules direct a continuous wash ofHEPA-orULPA-filteredairforward across the work area

• Take-upductsalongfrontandsideedges minimize turbulence and backwash in the work area

• Facevelocityisadjustablefromlessthan90FPMtohigherthan130FPM

• Built-inrecessedilluminatorprovidesdiffusedlightingwithoutinterfering with laminar flow

• Electropolishingavailabletoremoveembeddedsubsurfaceparticlesinstainless steel surfaces

• Fluorescentlightingstandard,UVsterilizationlampsavailable

Terra’s Horizontal Laminar Flow Station provides an economical work environment that exceeds the most stringent contamination requirements in the pharmaceuticals, biotech, electronics and semiconductor industries.

Powerful filter/blower modules provide a back-to-front laminar flow of filtered air across the work surface. The adjustable multi-speed, direct-drive blowers let you adjust air speed (90-130 feet per minute) to meet your requirements while providing low noise and vibration levels.

For enhanced air-stream control, this station also features return ducts along the front and side edges of the work area. These ducts enhance system efficiency by reducing backwash, the most common source of turbulence in a laminar flow system.

Modelshown:No.9620-64Forcompletespecifications:TerraUniversal.com

Petcocks Cat. # $/each

Nitrogen/Clean Dry Air (CDA) 9620-07 93.00 Vacuum 9620-08 93.00 DI Water 9620-09 93.00

Return air ducts minimize turbulence and backwash

IonizingUnits—seepage2

Anti-MicrobialCoatingsAvailable!—AskaboutTerra’slatestinnovationforasepticprocessing.

FanFilterUnits



Valuline™ wHisperFlow™ polypropylene laminar Flow HooDs• Portable,economicalsystemconvertsany

benchtopsurfaceintoaverticalorhorizontallaminarflowstation(select36"or48"width)

• Airflowspeedexceeds90feet/minutes(measuredwithHEPAfilter)

• Quietoperation:54dBAmeasured30"fromfilterface

• Polypropylenehoodconstructionresistsawiderangeofchemicals,includingalcoholandotherbiocides

• Includesbuilt-inpolypropylenebottomwithspilltrayandcovedseamsforeasycleaning

This versatile laminar flow hood gives you a particle-free work environment on any available work surface.

FFU:Quiet,ReliableOperationIt consists of two modules: a filter/fan unit (FFU), which houses a particle filter, and a polypropylene hood. The FFU houses a HEPA filter, rated 99.99% efficient with 0.3 micron particles. Its internal baffle system ensures uniform face velocity, and its 54 dBA noise rating ensures quiet operation. The low vibration level ensures minimal disruption of high-precision assembly or test procedures performed inside the hood. ULPA FFUs, rated 99.999% efficient @ 0.12µm particles, and ionization units are also available.

Sturdy,Chemical-ResistantPolypropyleneConstructionThe 0.5"-thick polypropylene construction offers excellent chemical compatibility, durability, and cleanliness. A hinged front access shield, made of static-dissipative PVC, enhances laminar flow. Continuous seams and coved corners simplify cleaning. Includes fluorescent light.

Nominal Width

Power VerticalFlow ValuLine™

WhisperFlow™Hood

HorizontalFlow ValuLine™

WhisperFlow™Hood

CorrespondingHEPA Fan/FilterUnit*

Cat. # $/each Cat. # $/each Cat. # $/each

48.75"120VAC, 60Hz 1688-40 1,322.00 1688-42 1,382.00 6601-24-H 740.00

220VAC, 50/60Hz 1688-40-220 1,322.00 1688-42-220 1,382.00 6601-24-H-220 845.00

36.75"120VAC, 60Hz 1688-41 1,156.00 1688-43 1,206.00 6601-23-H 740.00

220VAC, 50/60Hz 1688-41-220 1,156.00 1688-43-220 1,206.00 6601-23-H-220 845.00* ULPA models available

IonBar™This low-voltage system safely neutralizes status charges under the hood. Includes mounting kit.

ForHoodWidth(barlength)

110VAC,60Hz 220VAC,50/60HzCat. # $/each Cat. # $/each

36" (33") 2005-48 675.00 2005-48-220 686.0048" (44") 2005-49 771.00 2005-49-220 781.00

No.1688-40

Built-inpolypropylenespilltray


SpecificationsFull Fan Filter Unit (FFU) data at TerraUniversal.com

Material: Stress-relieved polypropylene

FFU: Motorized impeller with 3-speed control; provides minimum airflow of 650 CFM (middle speed)

Filter: 99.99% efficient HEPA (rated at 0.3 µm particles)

Dimensions: Vertical Flow Models: 36.75" / 48.75"W x 24.75"D x 39"H

(42.5 w/ FFU) Horizontal Flow Models: 36.75" / 48.75"W x 39"D x 25"H

(requires minimum 2" clearance at rear for air intake)

Work Area: Vertical Flow Models: 35.75" / 47.75"W x 24"D x 28.75"H Horizontal Flow Models: 35.75" / 47.75"W x 24"D x 24"H

ForHood Style

LaminateTop 304StainlessSteelTopCat. # $/each Cat. # $/each

Vertical Flow49”W x 25”D 1688-81 454.00 1688-83 726.0037”W x 25”D 1688-82 411.00 1688-84 658.00

Horizontal Flow49”W x 39”D 1688-85 590.00 1688-87 944.0037”W x 39”D 1688-86 534.00 1688-88 855.00

No.1688-42

CorrespondingTablesAll feature powder-coated, adjustable bases and choice of sealed laminate or 304 stainless steel tops.

FanFilterUnits


wHisperFlow™ BenCHtop HooDsThis versatile laminar flow hood gives you a particle-free work environment on any available work surface.

It consists of two modules: a filter/fan unit (FFU), which houses a particle filter, and a hood. The 24" x 48" x 12.25" FFU houses a HEPA filter, rated 99.99% efficient with 0.3 micron particles. Its internal baffle system ensures uniform face velocity. Hood prices include tilt-up sash and fluorescent light. Other sizes available at TerraUniversal.com.

HorizontalConfiguration(No.1686-55C-SS)VerticalConfiguration (No.1686-60C)

Powder-CoatedWhisperFlow™BenchtopHoods:OrderspecifiedFan/FilterUnits(FFUs)onpage7HoodMaterial*

OrderFFUsseparately (page7)

72"Wx24"D(2)36"x24"FFUs

60"Wx24"D(1)36"x24"and (1)24"x24"FFU

48"Wx24"D(1)48"x24"FFU

36"Wx24"D(1)36"x24"FFU

24"Wx24"D(1)24"x24"FFU

Cat. # $/each Cat. # $/each Cat. # $/each Cat. # $/each Cat. # $/eachVerticalFlowConfigurationsAcrylic** 1688-20C 3,219 1688-30C 2,890 1686-50C 2,450 1686-60C 2,175 1686-42C 2,010Static Dissipative PVC 1688-21C 4,013 1688-31C 3,683 1686-51C 3,243 1686-61C 3,079 1686-43C 2,804Nondissipative PVC 1688-22C 3,219 1688-32C 2,890 1686-52C 2,450 1686-62C 2,285 1686-44C 2,010Powder-Coated Steel (SDPVC) 1688-24C 4,026 1688-34C 3,696 1686-54C 3,256 1686-64C 3,091 1686-46C 2,816HorizontalFlowConfigurationsAcrylic** 1688-25C 3,219 1688-35C 2,890 1686-55C 2,450 1686-65C 2,285 1686-82C 2,010Static Dissipative PVC 1688-26C 4,013 1688-36C 3,683 1686-56C 3,243 1686-66C 3,079 1686-83C 2,804Nondissipative PVC 1688-27C 3,219 1688-37C 2,890 1686-57C 2,450 1686-67C 2,285 1686-84C 2,010Powder-Coated Steel (SDPVC) 1688-29C 4,026 1688-39C 3,696 1686-59C 3,256 1686-69C 3,091 1686-86C 2,816* Unless indicated in parentheses, shield is made of the same material as the hood. Frame is white powder-coated steel.** Acrylic is damaged by alcohol and other cleaning agents.

304StainlessSteelWhisperFlow™BenchtopHoods:OrderspecifiedFan/FilterUnits(FFUs)onpage7HoodMaterial*

OrderFFUsseparately (page5)

72"Wx24"D(2)36"x24"FFUs

60"Wx24"D(1)36"x24"and (1)24"x24"FFU

48"Wx24"D(1)48"x24"FFU

36"Wx24"D(1)36"x24"FFU

24"Wx24"D(1)24"x24"FFU

Cat. # $/each Cat. # $/each Cat. # $/each Cat. # $/each Cat. # $/eachVerticalFlowConfigurationsAcrylic** 1688-20C-SS 3,549 1688-30C-SS 3,186 1686-50C-SS 2,701 1686-60C-SS 2,398 1686-42C-SS 2,216Static Dissipative PVC 1688-21C-SS 4,425 1688-31C-SS 4,061 1686-51C-SS 3,576 1686-61C-SS 3,395 1686-43C-SS 3,091Nondissipative PVC 1688-22C-SS 3,549 1688-32C-SS 3,186 1686-52C-SS 2,701 1686-62C-SS 2,519 1686-44C-SS 2,216304 Stainless Steel (SDPVC) 1688-24C-SS 4,438 1688-34C-SS 4,075 1686-54C-SS 3,590 1686-64C-SS 3,408 1686-46C-SS 3,105HorizontalFlowConfigurationsAcrylic** 1688-25C-SS 3,549 1688-35C-SS 3,186 1686-55C-SS 2,701 1686-65C-SS 2,519 1686-82C-SS 2,216Static Dissipative PVC 1688-26C-SS 4,425 1688-36C-SS 4,061 1686-56C-SS 3,576 1686-66C-SS 3,395 1686-83C-SS 3,091Nondissipative PVC 1688-27C-SS 3,549 1688-37C-SS 3,186 1686-57C-SS 2,701 1686-67C-SS 2,519 1686-84C-SS 2,216304 Stainless Steel (SDPVC) 1688-29C-SS 4,438 1688-39C-SS 4,075 1686-59C-SS 3,590 1686-69C-SS 3,408 1686-86C-SS 3,105* Unless indicated in parentheses, shield is made of the same material as the hood. Frame is 304 stainless steel.** Acrylic is damaged by alcohol and other cleaning agents.

Configurealaminar-flowsystemtoyourrequirements—• Powder-coated or 304 stainless steel frame construction

• Vertical or horizontal flow design

• Five panel materials

• Five widths x 24" or 30" depth

• Select desired Fan Filter Unit and system options on pg. 524” 30”

24"Depth All models

below

30"Depth Availableat

TerraUniversal.com



CleanCuBe™ VertiCal laminar Flow HooDTerra’s CleanCube™ provides a vertical laminar flow of filtered air to provide a particle-free processing environment.

Its one-piece hood design eliminates cracks and crevices where germs or particles can collect. The radius corners are easy to wipe down, and the absence of a corner support frame ensures a full view of work in progress. It also eliminates the cramped, claustrophobic feeling that operators experience when working with only partial visibility. Fan/Filter Unit (FFU) provides 310 CFM average flow of HEPA-filtered air at 260 ft./minute.Seepage1forinformationoncleanroomworkbenches.

Accessshieldtiltsuptoaccommodateprocessequipment.

Radius corners wipedownclean!

IonizingBar (seepg.11)

CleanCube™VerticalLaminarFlowHood CorrespondingFilter/FanUnit**Dimensions

(in., nominal)Material WithHEPAFilter

Acrylic* Polycarbonate 110VAC,60Hz 220VAC,50/60HzCat. # $/each Cat. # $/each Cat. # $/each Cat. # $/each

24W x 24D x 28H 2003-10A 1,722.00 2003-12A 3,113.00 6601-22-H 740.00 6601-22-H-220 845.0036W x 24D x 28H 2003-11A 2,172.00 2003-13A 3,443.00 6601-23-H 740.00 6601-23-H-220 845.00 * Acrylic is damaged by alcohol and other cleaning agents. ** Visit www.TerraUniversal.com


FilterFanUnits:Seechartsonpage6forrequiredquantitiesSize Avg.Flow

CFM(med. speed)

Power WithHEPAFilter

WithULPAFilter

Cat. # $/each Cat. # $/each

48" x 24" 717 120VAC, 50/60Hz 6601-24-H 740.00 6601-24-U 845.00

220VAC, 50Hz 6601-24-H-220 845.00 6601-24-U-220 950.00

36" x 24" 602 120VAC, 50/60Hz 6601-23-H 740.00 6601-23-U 845.00

220VAC, 50Hz 6601-23-H-220 845.00 6601-23-U-220 950.00

24" x 24" 558120VAC, 50/60Hz 6601-22-H 740.00 6601-22-U 845.00

220VAC, 50Hz 6601-22-H-220 845.00 6601-22-U-220 950.00

Vapor-SealedIlluminatorStandard hoods above include a fluorescent light fixture. This upgrade fixture is enclosed in a vapor-sealed static-dissipative PVC housing. Price includes installation. Operates on 120 or 220VAC (50/60Hz).

IlluminatorDimensions Cat. # $/each

18"L x 5"W x 3"H 2400-34 248.0038.88"L x 5"W x 3"H 2400-40 382.00

WhisperFlow™BenchtopHoods,continued

Vibration-IsolatedStandTwo-piece design isolates WhisperFlow Hood from sealed laminate top work surface to isolate fan vibration. Adjustable models (shown in photo) allow height adjustment in 1" increments. 30"D and other materials available at TerraUniversal.com.

ForHoodSize Nonadjustable AdjustableCat. # $/each Cat. # $/each

24"W x 24"D 1688-51 395.00 1688-56 433.0036"W x 24"D 1688-52 414.00 1688-57 453.0048"W x 24"D 1688-53 459.00 1688-58 498.0060"W x 24"D 1688-54 502.00 1688-59 529.0072"W x 24"D 1688-55 531.00 1688-60 570.00

StainlesssteelframeNo.1686-54C-SS

30"Depth Availableat

TerraUniversal.com

FanFilterUnits


BenCHtop uniVersal HooD• Completelymodulardesignletsyou

configure an economical hood and filter/blowerconfigurationtoyourspecs!

• AsaMini-LaminarFlowHood,itprovidesacontinuouswashofHEPA-orULPA-filteredparticle-freeairtotheworksurface

• AsaDuctlessExhaustFumeHood,itventilatesandpurifieshazardousexhaustfumes for safe indoor release

• AsanExhaustFumeHood,itdrawsfumesfromtheworkareatoyourin-houseexhaustsystem

• Selectsingleortwinhoods(foroneortwooperators),inmanymaterialstosuitspecificapplications

Terra’s Universal Hood functions either as a particle-free mini-cleanroom work environment or an exhaust venting/purification station. Its practical, fully modular design allows you to construct an economical system that’s just right for your requirements.

1. SelectaHoodBegin by selecting the hood size (large or small, available for single or twin stations); then choose the material that’s right for your application. Each hood comes with a swing-up access shield of a compatible material, indicated on the ordering table.

A

C

B

H

G

ED

F

Ductlessexhaustconfiguration,shownwithpolypropylene

hoodandfilter/blowerhousings,optional

AirGard®andstand.

VerticalLaminarFlowConfiguration,shownwithAirGard™andvibration-isolatedstand

Includesairspeedmonitor

UniversalHoodNominalDimensions(ininches)Type A B C D E F G H

Small Single 16 24 4 32 36 17 23 8Large Single 19 28 8.5 41 45 21 27 8Small Twin 16 24 4 67 72 17 23 8Large Twin 19 28 8.5 87 90 21 27 8

Type UniversalHoods(includesaccessshieldofmaterialsindicatedinparentheses)See

Dimensionsabove

Polypropylene(Nondissipative PVCshield)

StaticDissipativePVC (DissipativePVCshield)

NondissipativePVC(Nondissipative PVCshield)

304StainlessSteel(DissipativePVCshield)

Acrylic*(Acrylicshield)

TemperedGlass(DissipativePVCshield)

Cat. # $/each Cat. # $/each Cat. # $/each Cat. # $/each Cat. # $/each Cat. # $/each

Small Single 7900-12A 1,414 2241-03A 1,798 7900-14A 1,281 2900-16A 2,022 1715-09A 767 2900-14A 1,465Large Single 7900-13A 1,661 2241-04A 2,372 7900-15A 1,511 2900-17A 2,336 1715-10A 1,020 2900-15A 1,676Small Twin 7900-06A 2,618 2242-00A 3,148 7900-08A 2,244 2900-06A 3,486 1715-06A 1,420 2900-12A 2,531Large Twin 7900-07A 2,898 2242-01A 4,094 7900-09A 2,619 2900-07A 3,998 1715-08A 1,820 2900-13A 2,936* Acrylic is damaged by alcohol and other cleaning agents.

8 Thousands of Critical Environment Solutions: www.TerraUniversal.com8 Thousands of Critical Environment Solutions: www.TerraUniversal.com

uniVersal HooD

LaminarFlowStationThis positive-pressure configuration allows filtration of particles to ensure a uniform, contamination-free flow of air to the work surface. It thus provides a mini-cleanroom environment for particle-sensitive operations in microelectronics, biotech, and many other industries. See performance chart above.

Select HEPA or ULPA Filter, along with Blower and FilterHousing of desired material.

DuctlessExhaustFumeHoodThis negative-pressure system ventilates and purifies hazardous fumes generated under the hood, allowing safe indoor release of exhaust. It is ideal for such operations as soldering, screen printing, and chemical mixing. Its portability enables you to put a cover on operations that might otherwise create a toxic work environment! See performance chart above.

Select Exhaust Purification Filter, along with Blower and FilterHousing of desired material.

Room Air

Exhaust Fume

Purified Exhaust

Prefilter

Exhaust Purification Filter

Class 100 Final Filter

PortableExhaustFumeHoodThis negative-pressure system is designed to ventilate fumes to your in-house exhaust system, usually by means of an exhaust duct.

Note: Twin stations require two blower modules.

Select AdapterPanel for connection to in-house ventilation system.

3. SelecttheFiltersNote:Twin stations require two filter/blower modules and filters. Cat. # $/each

HEPA (High-Efficiency Particulate Air) 1681-02 273.00Rated 99.99% efficient @ 0.3 micron particles.

ULPA (Ultra-Low Penetration Air) 1681-10 463.00Rated 99.999% efficient @ 0.12 micron particles.

ReplacementPre/PostFilter 9202-50 33.00For laminar flow applications only.

ActivatedCharcoalFilter 1716-00A 473.00Removes most organic vapors. New bonded-charcoal design improves safety and performance.

8"-diameterx1"flange(standard)

Charcoalfilter now with Particle Entrapmentshield to contain dust

Includes8"diameterx1"flange.Flangeadapterpanelsavailable

IonBar™ for Laminar Flow EnclosuresEnhances ESD and particle control by safely neutralizing static charges. Includes installation in selected hood.

Bar length Cat. # $/each

11" Long (2 emitters) 2005-35 656.0022" Long (4 emitters) 2005-36 761.0033" Long (6 emitters) 2005-38 873.0044" Long (8 emitters) 2005-37 984.00

Foracleaner,static-safeenclosure!

Forhigh-velocityexhaustfumerequirements, selectTerra’sBenchtopDuctlessExhaustFumeHoodonpg.21

BlowerModule* A.LaminarFlow B.DuctlessExhaustPurifier C.ExhaustVentilationBlowerType**

(@0"SP)Power StainlessSteel StainlessSteel Polypropylene StainlessSteel Polypropylene

Cat. # $/each Cat. # $/each Cat. # $/each Cat. # $/each Cat. # $/each

1200 CFM115VAC/60Hz 1715-51 835 1715-53 663 1684-98 726 1715-55 663 1684-98 726230VAC/50Hz 1715-51-220 835 1715-53-220 663 1684-98-220 726 1715-55-220 663 1684-98-220 726

FilterHousing*** 1715-52 328 1715-54 344 1687-10 352 — — — —* Dimensions: 22.75"W x 13.50"D x 7.25"H** Actual performance depends on filter load.*** Dimensions: 30" x 13.75"D x 7.75"H. Order filters separately (below)

2. SelectaFilter/BlowerModule

Performance LaminarFlow* ExhaustFume**HoodSize Flow Velocity Flow VelocitySmall Single 800 CFM 175 ft./min. 200 CFM 117 ft./min.Large Single 800 CFM 175 ft./min. 200 CFM 90 ft./min.Small Twin 1600 CFM 175 ft./min. 400 CFM 111 ft./min.Large Twin 1600 CFM 175 ft./min. 400 CFM 88 ft./min.

* Average values for operation with HEPA filter(s) No. 1681-02 (twin stations use two filter/blower modules) at “high” setting. Velocity reading taken at the filter face; speed adjustable down to 100 ft./min.

** Average values for operation with activated charcoal filter(s) No. 1716-00A (twin stations use two filter/blower modules). Exhaust systems operate at “high” setting only (no speed control). Velocity readings taken at hood inlet with shield down (8" gap).

9To Order, Call 714-578-6000 or Fax 714-578-6020 Vol. 8 No. 13 9To Order, Call 714-578-6000 or Fax 714-578-6020 Vol. 8 No. 13

4. SelectaStandBoth designs feature raised lips to hold the hood securely in place. All frames (whether isolated or not) are made of rigid square tubing with a white powder-coat finish, and include stainless steel scuff sleeves to prevent scuffing along the bottom leg support. The work surface stands 32" above the floor. Be sure to select the size (large or small, single or twin) to match your hood.

Vibration-isolatedstandwithfree-standinghoodframeisolatesblowervibrations.

Non-isolated(one-piece)stand

uniVersal HooD

Lighting FixtureRecommended for use with stainless steel and polypropylene hoods (which permit only partial visibility of the work area). Two fixtures are recommended for twin stations. Cat. # $/each

Vapor-ProofLight Fixture Only (installed) 115VAC, 50/60Hz 2400-40 382.00 230VAC, 50Hz 2400-40-220 382.00

Fluorescent Tube 1682-26 15.00

Standard Fixture WithStainless Steel Reflector (installed) 115VAC, 50/60Hz 1681-05 229.00 230VAC, 50Hz 1681-05-220 229.00

Power StripsProvide 4 receptacles for 115VAC/60Hz equipment. Includes a master on/off switch and 15-Amp circuit breaker. Price includes installation at rear of work surface. Cat. # $/each

1681-80 167.00

5. OtherOptions

FlangeAdapterPanelsalsoavailable

Stands(Selectthedesiredstyle)ForHoodType

HoodFrame (Powder-Coated)

Steel)

WorkSurfaceNonconductive

LaminateConductive

LaminatePolypropylene 304StainlessSteel

Solid304Stainless

SteelPerforatedCat. # $/each Cat. # $/each Cat. # $/each Cat. # $/each Cat. # $/each Cat. # $/each

Two-PieceVibration-IsolatedStandsSmall Single 1682-01 294.00 1682-02 415.00 1682-03 633.00 1715-17 734.00 1715-21 858.00 1715-25 1,137.00Large Single 1715-02 310.00 1715-03 460.00 1715-07 668.00 1715-18 786.00 1715-22 874.00 1715-26 1,159.00Small Twin 1715-11 392.00 1715-13 532.00 1715-15 740.00 1715-19 800.00 1715-23 960.00 1715-27 1,439.00Large Twin 1715-12 546.00 1715-14 666.00 1715-16 880.00 1715-20 954.00 1715-24 1,137.00 1715-28 1,717.00One-PieceNon-IsolatedStandsSmall Single — 1682-16 554.00 1682-12 772.00 1715-29 874.00 1715-33 1,005.00 1715-37 1,296.00Large Single — 1682-17 599.00 1682-13 810.00 1715-30 924.00 1715-34 1,020.00 1715-38 1,302.00Small Twin — 1682-18 737.00 1682-14 948.00 1715-31 1,009.00 1715-35 1,032.00 1715-39 1,512.00Large Twin — 1682-19 833.00 1682-15 1,087.00 1715-32 1,164.00 1715-36 1,209.00 1715-40 1,935.00

High-Performance Plastics SeriesIn addition to the materials listed in this catalog, Terra also offers all its bench top hoods in a wide range of specialty plastics formulated to meet unique requirements.

For a Quotation on any Terra product manufactured off these materials, please call or submit an email request.

• PVDF: Corrosion-Resistant (FM Listed)• CPVC: Corrosion-Resistant, Heat-Resistant• PVC: Corrosion-Resistant• PVC-C: Fire-Resistant (FM Listed)• PVC: Antistatic• Polypropylene: High-Stiffness• Polypropylene: Flame-Resistant• HDPE (High-Density Polyethylene)• Acrylic: Antistatic• Polycarbonate: Antistatic

AirGard™ Air Velocity Monitor (installed)Monitors air velocity (70 - 250 ft/sec; 0.35 - 1.25 m/sec) to ensure laminar flow or ventilation efficiency. Cat. # $/each

110VAC, 50/60Hz 6704-65 1,247.00220VAC, 50Hz 6704-65-220 1,247.00


V-RAY™ Ultra-VioletSanitationModules• Economical,fast-acting

systemsuseUV-Clighttokillabroadspectrumofbacteria,viruses,andmoldspores(detailsatTerraUniversal.com)

• Aneffective,convenientalternativetomanualalcoholsterilizationofdifficult-to-reachisolatorinteriors

These economical, ETL-listed sanitation modules are ideal for glovebox isolators and other confined, difficult-to-clean chambers. Their long-lasting, low-mercury lamps can be installed in most Terra enclosures;

acrylic, PVC and other hood materials shield the operator against harmful UV-C light. Prices include installation in selected hood. Cat. # $/each

21" lamp 3305-90 420.00 33" lamp 3305-91 447.00 61" lamp 3305-92 563.00

RecommendedUVFixturesHood Width

UV Model

24" 3305-9036" 3305-9148" 3305-90 (Qty. 2)60" 3305-90 + 3305-9172" 3305-92

IonizingEquipmentNominal

DimensionsIonBarforFFUs* B.IonizingFan

Module**C.IonBar™for

OEMapplications***Cat. # $/each Cat. # $/each Cat. # $/each

11" (2 emitters) — — 2005-29 752.00 2005-05A 403.0022" (4 emitters) 2005-47 563.00 2005-30 857.00 2005-06A 508.0033" (6 emitters) 2005-48 675.00 2005-32 968.00 2005-16A 621.0044" (8 emitters) 2005-49 771.00 2005-31 1,079.00 2005-07A 731.00

* Includes mounting hardware for Terra FFU. Must be ordered together with FFU.** For 220VAC models, add "–220" to the part number.*** Requires transformer: #2005-09A ($34) for 110VAC; #2005-09A-220 ($45) for 220VAC

CleanBootH™ laminar Flow station Terra’s Portable CleanBooth™ is ideal for kitting operations, assembly, or work with probe stations, screen printers and other free-standing or benchtop process equipment. The backbone of the system is one or more filter/fan units (FFUs), each with industry-leading low-noise impeller blowers. Flexible side curtains create a 3-sided enclosure, enhancing the laminar flow. See other options below.

No.1870-01withoptionalfilter/fanunitandpanelkit.

MobileFrameSupportIncludes set of 4 casters, 2 with locking brakes. Order FFUs below. Overall Dimensions* No. of FFUs Standard Height: 82" (W x D, nominal) (order below) Cat. # $/each

49" x 25" (1) 24" x 48" 1870-01 933.00 73" x 25" (2) 24" x 36" 1870-02 1,152.00

*Filter face 70" above floorFilter/FanUnitsIncludes HEPA filter rated 99.99% efficient @ 0.3µm particles. ULPA filters and complete specifications available at TerraUniversal.com.

No.1870-02withoptionalfilter/fanunit,light,panelkitandtable.

ThePerfectEquipmentEnclosure— specifyanycoveragearea!

NominalDim.W x L

Power Avg.Flow@90FPM

HEPAFFU IonizingBar*

Cat. # $/each Cat. # $/each2' x 4' 110VAC 644 CFM 6601-24-H 740.00 2005-49 771.002' x 4' 220VAC 644 CFM 6601-24-H-220 845.00 2005-49-220 781.002' x 3' 110VAC 477 CFM 6601-23-H 740.00 2005-48 675.002' x 3' 220VAC 477 CFM 6601-23-H-220 845.00 2005-48-220 686.00

* Includes installation kit for easy attachment to FFU. Ionizing Kit and FFU must be ordered together.

SoftwallPanelKits40 mil curtains are 60" long. Each kit includes 2'-wide side panels and appropriate length to cover the rear of the station. Easy, no tool installation in GripTrak™ mounts installed along frame. Cleanroom Vinyl Anti-Static Vinyl For CleanBooth Cat. # $/each Cat. # $/each

49" width 1330-00A 279.00 1330-01A 352.00 73" width 1330-05A 543.00 1330-06A 687.00

Fluorescent Light 115/277VAC, 50/60Hz Cat. # $/each

35.5" long (1) 1870-10 249.00 47" long (2) 1870-11 291.00(1) – Two required for 73"-wide CleanBooth. Includes installation.(2) – One required for 49"-wide CleanBooth. Includes installation.

Ionizing Equipment• Providesabalancedstream

ofpositiveandnegativeionsto neutralize static charges andeliminateparticleattraction

• Idealforusewithpharmaceuticalpowders,ESD-sensitivemicroelectronics,andotherdelicatematerials

• Dischargetime:1000to100Vinlessthan5seconds(mountedinlaminarflowof90fpm,measured24"fromionizingbar)

Helpscontrolstaticchargesandthecontaminantstheyattract!

FanFilterUnits



HeateD proCessing CHamBer• Idealforworkwithbiologicalsamples,

microelectronics-basedsurgicaltools,medicalimplants,andothercriticalcomponentsrequiringabove-ambientcalibration or testing

• Recirculationsystemensuresuniformheatingupto140°F

• Transparentpolycarbonatefrontandsidesallowfullvisibility

• HingedaccessdoorwithPVCpartingcurtain allows introduction of large materialswhenopened

SpecificationsDimensions: 19"W x 24"D x 15"HMaterials: Polycarbonate (front and side of processing chamber); 304 stainless steel

(blower/heater housing and diffusers)Blower: 230 CFM motorized impeller

HeatedProcessingChamber Cat. # $ each

110VAC/60Hz 1530-40A 5,493.00 220VAC/50Hz 1530-40A-220 5,493.00

Customconfigurationstoyourspecifications!

puriFier® logiC BiosaFety CaBinetsPurifier® Logic Biosafety Cabinets meet or exceed all NSF standards, including 99.99% efficient HEPA filters, nominal inflow of 105 fpm, and all positive-pressure ducts surrounded by negative pressure plenums. It includes an angled, fully closing, counterbalanced tempered glass sash for closer, more comfortable viewing, and a curved inlet grille that provides a comfortable forearm rest. Bright, glare-free fluorescent lighting with timer and solid state ballasts provides 90-100 footcandles at the work surface, exceeding NSF standards.

Electronically Commutated Motor (EMC) Technology precisely controls airflow without the need for airflow sensors. The motor is programmed to consistently deliver the precise volume of air required, even as filters load. Its line-of-sight LCD display terminal provides instant feedback that the cabinet is operating properly, and a “Filter Remaining” bar graph eliminates filter change guesswork. Best of all, the reliable ECM is rated for 50,000 hours of operation—over three times the life of other BSC motors.

Intelligent features enhance safe, efficient, cost-saving operation. Smart-Start lets you program start-up and shut-down of the blower and lights when the sash is opened or closed, assuring consistent operation and saving time. Night-Smart idles the blower at 30% speed or less when the sash is fully closed to help maintain a particulate-free environment inside the cabinet during periods of non-use. Cat. # $/each

4-foot nominal width, 115VAC 3645-45 7,314.00Base Stand 3645-27 712.00Othersizesandconfigurationsavailableat TerraUniversal.com


Biozone ™ 4000 temperature staBility CHamBer• Providesaparticle-free,heatedenvironmentforbiocompatibilitytesting,incubationand

othercriticaloperations

• Segmentedaccessshieldsaffordeasyaccesstolargeworkingarea

•Maintainsstabletemperature(±0.5°Cbetween18and38°C)evenwithaccessshieldpartlyopen

• Humidification/dehumidificationmodulesavailableforRHstability

This enclosure maintains extremely stable temperature conditions (up to 38°C) even when the external temperature fluctuates as much as ± 20°C and the access shield is partially open.

Its large working area (up to 120"W x 54"D x 36"H) is divided into 40"W zones, each with independent access shield and temperature controls. Air flows vertically through 99.99% efficient HEPA filters to provide a continuous wash of laminar-flow air that creates a cleaner-than-Class 100 work environment. Air passes through perforations in the work surface and passes through a 10,000 BTU air conditioning module and then through zone heaters that bring it up to a constant temperature before it circulates through HEPA filters and re-enters the work area.

The system disassembles for convenient shipping and installation in facilities with restricted access. Front access shield cut-outs can be specified for glove ports.

A/C Module

Zone Heaters

Rear Wall

HEPAFilter

Air at Desired Temp

Processed Air

Cooled Air

Air Return Plenum

Modelshown:No.1695-25

Antimicrobial SurfacesAvailable

Rear View

OverallDimensions ChamberSize(ID) 40"WAccessZones Cat. # $/each

40"W x 64"D x 81"H 40"W x 54"D x 36"H 1 1695-23 9,371.0080"W x 64"D x 81"H 80"W x 54"D x 36"H 2 1695-24 17,956.00

120"W x 64"D x 81"H 120"W x 54"D x 36"H 3 1695-25 25,754.00* Order desired Fan/Filter Unit (HEPA or ULPA) separately - one 2' x 4' unit required per access panel.

BioZone™7200Vertical laminar flow enclosure is available with constant temperature and humidity control systems to provide a clean, sterile controlled environment for automated processing equipment. Equipment control integration available; call to discuss your requirements.


Free-stanDing exHaust Fume HooDs• StainlessSteelorPowder-CoatedSteelHoodsafelyvents

fumesawayfromtheworksurface

• OptionalExhaustPurificationSystem(withexplosion-proofventilator)safelyremoveshazardousfumesforsafeindoor release

• TransparentPVCsidepanelsandslidingshieldcontrolnegativepressureunderthehood,reducingriskoffumesescaping

• Steelframeprovidessturdysupport,isolateshoodfromwork surface

This Exhaust Fume Hood affords you maximum economy and flexibility in designing the system that’s right for your application.

The frame is fabricated from welded 11⁄2" x 3" powder-coated or stainless steel to ensure sturdy support for the exhaust fume hood. The frame also isolates the hood (and any vibrations the hood causes) from the work surface. A 6" round discharge allows easy connection to your in-house exhaust system to provide the internal negative pressure necessary to safely remove fumes from the work surface.

The front of the unit features an easy-glide sliding shield (also made of transparent PVC mounted in a powder-coated aluminum frame). The Ductless Exhaust Purification Hoods include an explosion-proof blower installed inside the hood and provisions for mounting purification filters and particle filters that safely remove a wide array of fumes to allow safe indoor release of exhaust.

ShownwithoptionalCleanroomBench. (Seepage1forcompleteinformation). Anit-microbialcoatingsavailable.

98"

ExhaustPurificationFilter (forDuctlessExhaustApplications)Removes a wide array of fumes for safe indoor exhaust release. Four are recom mended for each hood (two stacks of two filters each). Bonded-charcoal design improves safety and performance, contains dust. Cat. # $/each

Purification Filter 1716-00A 473.00

HEPAParticleFilters 1681-02 273.0099.99% efficient @ 0.3µm-diameter particles. Select one for each stack of purification filters. Recommended for cleanroom applications.

Dust-SealedFluorescentIlluminatorEach fixture holds two 40W T-12 lamps. For Class 1, Div. 2 groups A-D locations 53" x 5" x 3" Cat. # $/each

3800-70 940.00Vapor-sealedandexplosion-prooflightingavailableforusewithexplosivefumes.

32"

66.75"

Modelsbeloware110VAC/60Hz.Tospecify220VAC/50Hz,add“-220”totheaffectedpartnumber.

34.75"

BA

Dimensions ExhaustFumeHoods* DuctlessExhaustPurificationHoods**OverallLength

InsideLength

OptionalWorkSurface

304StainlessSteel Powder-CoatedCRSteel

304StainlessSteel Powder-CoatedCRSteel

A B Order below Cat. # $/each Cat. # $/each Cat. # $/each Cat. # $/each52" 49" 48" x 30" 2400-03 5,910.00 2400-08 3,616.00 2400-12 7,782.00 2400-16 5,935.0064" 61" 60" x 30" 2400-04 6,616.00 2400-09 4,033.00 2400-13 9,903.00 2400-17 6,314.0076" 73" 72" x 30" 2400-05 7,387.00 2400-10 4,875.00 2400-14 10,470.00 2400-18 7,080.00

100" 97" 96" x 30" 2400-06 7,806.00 2400-11 5,400.00 2400-15 11,157.00 2400-19 7,451.00* Supporting frame is made of powder-coated steel tubing; stainless steel frame is available on a custom basis.** Order Purification Filters separately. These systems include a 3/4 HP explosion-proof blower mounted for negative-pressure venting.

Dimensions CorrespondingCleanroomBench†

OverallLength

InsideLength

OptionalWorkSurface

With Non-ConductiveTop

With Static-DissipativeTop

With StainlessSteelTop

With PolypropyleneTop

A B Order below Cat. # $/each Cat. # $/each Cat. # $/each Cat. # $/each52" 49" 48" x 30" 1722-00 609.00 1728-00 943.00 1521-45 1,109.00 1522-00 914.0064" 61" 60" x 30" 1724-00 670.00 1730-00 966.00 1751-00 1,198.00 1522-01 956.0076" 73" 72" x 30" 1726-00 680.00 1732-00 1,009.00 1752-00 1,257.00 1522-02 982.00

100" 97" 96" x 30" 2402-00 813.00 2400-00 1,169.00 1753-00 1,349.00 1522-04 1,139.00† Complete with top, adjustable legs, and right/left drawer mounting brackets. Height is adjustable (30" -36"). Drawer unit optional.

(See page 1.)


Valuline™ HigH-perFormanCe DuCtless Fume HooDs• Portable,economicalsystemconvertsanybenchtop

surface into a ductless fume hood

• Providesanaverageairflowspeedof90feet/minutes(measuredwithcarbonfilter)

• Polypropylenehoodconstructionprovidesexcellentchemical resistance

• Unitizeddesignincludesbuilt-inpolypropylenebottomwithspilltray,continuousseamweldswithcovedcorners

• Ventilatesandremovesorganicvaporsreleasedinsidethehoodtoallowsafereleaseofexhaustfumes.

• Sturdy,chemical-resistantpolypropyleneconstruction

The 0.5"-thick polypropylene construction offers excellent chemical compatibility, durability, and cleanliness. A hinged front access shield, made of static-dissipative PVC, restricts the air exit and enhances laminar flow. The fluorescent light fixture is sealed inside a dissipative PVC housing to prevent contact with chemical vapors.

The onboard 3100 RPM fan module draws fumes into activated carbon filters, which remove chemical fumes from the exhaust flow. Terra’s bonded charcoal filters minimize particle sloughing and eliminate voids that can allow chemical bypass of the charcoal media.

A 0 – 3.0"WG differential pressure gauge verifies that the fan module is generating the negative pressure necessary to ventilate the work area.

OutsideDimensions(Insidedimensions)

No.of Fans

No.of Filters*

Power ValuLine™DuctlessFumeHoodCat. # $/each

42"W x 29"D x 43"H (41"W x 28"D x 29"H)

1 1 120VAC, 60Hz 1688-45 2,743.001 1 220VAC, 50/60Hz 1688-45-220 2,743.002 3 120VAC, 60Hz 1688-46 3,184.002 3 220VAC, 50/60Hz 1688-46-220 3,184.00

29"W x 29"D x 43"H (28"W x 28"D x 29"H)

1 1 120VAC, 60Hz 1688-47 2,470.001 1 220VAC, 50/60Hz 1688-47-220 2,470.00

* Order activated charcoal filter(s) separately.

Filters ** HEPA filter requires Exit Filter Housing, made of polypropylene, which mounts on top of the filter housing and raises the overall height by 3.5"

FilterType(Dimensions) Cat. # $/eachActivated Charcoal (13" x 27.75" x 1.7") 1716-00A 473.00

HEPA (99.99% efficient)** 12" x 12" x 3" 2100-30 175.00

Exit Filter Housing** 1688-49 119.00

V-BankCharcoalFilters:Morecharcoalwithlessairrestriction!CompleteinformationatTerraUniversal.com

Standardcharcoalpanels (seeorderingchartbelow)

Built-inpolypropylenespilltray

No.1688-46

ActivatedCharcoalFiltersTerra ductless exhaust fume hoods employ activated charcoal filters that adsorb (bond with) a broad range of chemical vapors to remove annoying odors from the exhaust stream. They are not intended for use with hazardous compounds.

Special impregnations are used to enhance this adsorption efficiency in the presence of specific chemical compounds. See complete contamination list at TerraUniversal.com for assistance in selecting the right filter for your application.

TypeA: ActivatedCharcoal: Ideal for a broad range of organic compounds

TypeB: ActivatedCharcoal/PermanganateOxidantBlend: Chlorinated aromatics, corrosives, hydrides, alcohol, VOCs

TypeC: PermanganateOxidant: AldehydesTypeD: CausticImpregnate: Organic and

mineral acids, halides, VOCs, sulfur compounds

TypeE: AcidImpregnate: Amines, acetate

FilterSize*(in.)

ActivatedCharcoal(TypeA)

TypeB TypeC TypeD TypeE

Cat. # $/each Cat. # Cat. # Cat. # Cat. # $/each13 x 27.75 x 1.7 1716-00A 473.00 1716-00A-B 1716-00A-C 1716-00A-D 1716-00A-D 495.00

12 x 12 x 3 1701-90A 353.00 1701-90A-B 1701-90A-C 1701-90A-D 1701-90A-E 370.00* Others available, including custom sizes.


ToOrder—

1. The chart below indicates the systemwidths available for two, three or four filter packs. Each filter pack includes a primary filter (generally, an activated charcoal filter), and a final HEPA filter, if exhaust must meet critical cleanliness requirements.

2. Select the desired blower/filtermodule. Each polypropylene housing incorporates a 1200 CFM impeller blower for each filter pack, ensuring adequate exhaust flow (see performance graph on facing page).

3. Select the hood material for your application.

4. Order the correct number of filters for your hood size. The activated charcoal filter listed below is 98% effective at removing a wide range of organic fumes. Pre- and post-filters trap charcoal particles.

5. A fluorescent light is recommended for optimal visibility, especially with a polypropylene or stainless steel hood. Ionizingequipment is available to protect the work area against surface charges. The optional AirGard®AirVelocityMonitor ensures adequate airflow.

6. Select the appropriate work surface. Refer to page 17 for benches designed specifically for these systems.

ECM™ModularSystem:

DuCtless Fume HooDsNegative-pressure systems ventilate and purify hazardous fumes generated under the hood, allowing safe indoor release of exhaust. They are ideal for such operations as soldering, screen printing and chemical mixing.

Select the hood material and filter(s) for your application below. They require a work surface that provides at least 44" of depth (for horizontal systems) or 30" (for vertical systems). All components are delivered as a complete turnkey system, ready for operation.

Cat. # $/each

PurificationFilter 1716-00A 473(Activated charcoal) Now includes particle entrapment layers to contain charcoal dust.

Cat. # $/each

HEPA (High Efficiency Particulate Air) 1681-02 273 Rated 99.999% efficient @ 0.3µm particles

ULPA(Ultra Low Penetration Air) 1681-10 463 Rated 99.999% efficient @ 0.12µm particles

Filters:Note: Two filters (a charcoal filter and HEPA/ULPA final filter) can be installed in each filter pack.

Bondedfiltersimprovesafetyandperformance

Size Blower/FilterModule** Hoods(Seefacingpageforfullspecifications)No.of

Blowers*115VAC60Hz

230VAC 50Hz

Dissipative PVC

NondissipativePVC Acrylic*** Polypropylene 304StainlessSteel

Cat. # Cat. # $/each Cat. # $/each Cat. # $/each Cat. # $/each Cat. # $/each Cat. # $/eachHorizontalFlow

2 (28") 1650-30 1650-30-220 1,630 1682-60B 2,070 1682-83B 1,339 1682-86B 1,048 1682-89B 1,517 1682-92B 1,6743 (42") 1650-31 1650-31-220 2,442 1682-61B 2,534 1682-84B 1,518 1682-87B 1,172 1682-90B 1,804 1682-93B 2,3524 (56") 1650-32 1650-32-220 3,258 1682-62B 2,922 1682-85B 1,768 1682-88B 1,320 1682-91B 1,949 1682-94B 4,755

VerticalFlow2 (28") 1650-40 1650-40-220 1,630 1683-22B 1,658 1683-25B 1,185 1683-28B 919 1683-31B 1,343 1683-34B 1,5683 (42") 1650-41 1650-41-220 2,442 1683-23B 1,983 1683-26B 1,256 1683-29B 1,002 1683-32B 1,500 1683-35B 1,7844 (56") 1650-42 1650-42-220 3,258 1683-24B 2,349 1683-27B 1,489 1683-30B 1,090 1683-33B 1,625 1683-36B 1,933

* Indicates number of filters that are housed in the corresponding blower/filter module. Order HEPA or ULPA filters separately.** Includes one 1200 CFM impeller blower for each filter pack. (rated at 0" static pressure; see performance data on facing page).*** Acrylic is damaged by alcohol and other cleaning agents.

SystemOptions LightingFixture AirGard™ PowerStripForHoodSize 110VAC,

60Hz220VAC, 50/60Hz

AirVelocityMonitor Includes4outlets110VACHz 220VAC

Cat. # Cat. # $/each Cat. # Cat. # $/each Cat. # $/each28"W (two filters) 1682-23 1682-23-220 250

42"W (three filters) 1682-24 1682-24-220 271 6704-65 6704-65-220 1,247 1681-80 16756"W (four filters) 1682-25 1682-25-220 473


ECM™ModularSystem(continuedfrompreviouspage)

• AllowpermanentinstallationofECM™ModularHoodsascompleteturnkeysystems

• Availableinseveralmaterialsanddesignstomeetavarietyofcleanroomrequirements

• Precisesizingeliminatesexposededgesthatcollectparticles

BenchesaresizedtofittheECMhoodprecisely;selectthemodelthatmatchesyoursystem.

Cleanroom BenCHesForECM™ModularHoods

These cleanroom benches are designed specifically for use with Terra’s Environmental Control Modules (ECMs) listed on the following pages.

Designed to permit fixed (permanent) hood installation, they turn your ECM into a secure, turnkey system with minimal exposed edges that can collect particles. They are available in several materials to match a variety of requirements. Dissipative and nondissipative tables feature laminated surfaces sealed at the top and bottom to eliminate particle shedding. Laminate, polypropylene and stainless steel models include epoxy-finished steel frames with stainless steel scuff guards to prevent chipping of the bottom leg member.

SpecificationsBlower: 1200 CFM (rated at 0" static pressure) 1675 RPM variable-

speed impeller; 115VAC/ 60Hz; consumes 115W; 1.0 running amps (230VAC/50Hz models also available); housed in white polypropylene housing with plenum chamber to optimize uniform air flow. Note: 1200 CFM blowers used in ductless exhaust applications do not include speed controls.

Exhaust Purification: Bonded charcoal filters eliminate voids and dead zones for improved safety and efficiency. Particle entrapment shield contains charcoal dust.

Dimensions: Hood: 28"/42"/56"W x 30"D x 29"H (excluding blower) Blower: 131/2"D x 321/4"H x 28", 42", or Housing: 56"W

AirFlowAs Shown: 600 CFM exhaust flow (200 CFM per filter pack)

With HEPA final filters #1681-02: 525 CFM exhaust flow (175 CFM per filter pack)

Test Configuration: (3) 1200 CFM Impellers (3) Charcoal Filters #1716-00CFaceVelocity:147ft./min.

athoodinlet,shielddown (withcharcoalfiltersonly)

Draws exhaust fumes into an exhaust duct for delivery to an in-house filtration system. Each blower module includes multiple 1200-CFM impeller blowers to provide adequate ventilation. An 8"-diameter flange for each blower allows connection to exhaust conduit.

HorizontalExhaustFumeHood VerticalExhaustFumeHood

ECM™ModularSystem

exHaust Fume HooDs

Prefilter

ExhaustPurification Filter

HEPA/ULPAFilter

Room Air

Exhaust Fume

Filtered/Purified Air

PricesandSpecificationsonline!

BenchesForHoodSize (No.ofBlowers)

NondissipativeLaminate DissipativeLaminate Polypropylene 304StainlessSteelTop Powder-CoatBase

Powder-CoatBase Powder-CoatBase Powder-CoatBase SolidTop PerforatedTopCat. # $/each Cat. # $/each Cat. # $/each Cat. # $/each Cat. # $/each

ForVerticalFlowApplications(32"Hx33"D)28"W (2 modules) 1684-14 436.00 1684-17 727.00 1684-20 742.00 1684-23 907.00 1684-26 1,474.0042"W (3 modules) 1684-15 476.00 1684-18 762.00 1684-21 783.00 1684-24 1,013.00 1684-27 1,817.0056"W (4 modules) 1684-16 501.00 1684-19 792.00 1684-22 801.00 1684-25 1,015.00 1684-28 2,115.00ForHorizontalFlowApplications(32"Hx44"D)28"W (2 modules) 1684-35 460.00 1684-38 751.00 1684-41 825.00 1684-44 956.00 1684-47 1,519.0042"W (3 modules) 1684-36 498.00 1684-39 789.00 1684-42 839.00 1684-45 1,027.00 1684-48 1,829.0056"W (4 modules) 1684-37 536.00 1684-40 825.00 1684-43 853.00 1684-46 1,089.00 1684-49 2,165.00


Idealfordistillationandotheroperations

with large glassware or equipment.

Cat. # $/each

Charcoal Purification Filter 1716-00A 473.00HEPA Final Filter 1681-02 273.00

BenCHtop DuCtless exHaust Fume HooDThis high-capacity, turnkey fume hood features dual blowers to ensure a safe exhaust flow speed (181 ft./min.). Polypropylene construction resists chemical vapors, and an onboard air speed meter monitors operation. Includes a vapor-sealed fluorescent illuminator. Dimensions: 45"W x 28"D x 27"H. Other sizes and options available at www.TerraUniversal.com.

Cat. # $/each

2900-20 3,506.00

HigH-ClearanCe CHemiCal Fume HooDThis benchtop unit features over 28" of vertical clearance with the access shield open. The dual impeller blowers provide ample ventilation under filter load to maintain exhaust air speed ≥ 100 fpm for safe operation and worker protection. A polypropylene tray collects chemical spills, and quick-release clamps ensure easy access to activated charcoal and/or final HEPA filters. The sloped front access provides full view of and access to work in progress. Overall dimensions: 32.5"W x 25"D x 33.25"H (48"H with filter/blower module). Access shield clearance: 15.5" (closed); 28.25" (open).

Exhaust Flow: 400 CFM (with charcoal filter) 350 CFM (charcoal and HEPA final filter)Air Velocity: 118 ft./min. with shield down (operated with charcoal filter only)

Quick-release filterhousing–

replacefilterfromaboveorfrom

insideenclosure!

Airspeedmonitorensuressafeoperation

8"-diameterx1"flange(standard)Charcoalfilter

now with Particle Entrapmentshield to contain dust

Fullspecifications– TerraUniversal.com

Highcapacityblowermaintainsairspeed>100ft./min.with15"ofverticalworkingclearance!

Highcapacityblowermaintainsairspeed181ft./min.with5"ofverticalworkingclearance!

HoodMaterial* Cat. # $/eachAcrylic*** 2900-30 3,497.00

PVC 2900-31 3,564.00Polypropylene (PVC shield)** 2900-32 3,775.00

Polycarbonate 2900-33 3,815.00* Includes filter/blower enclosure and spill tray made

of white polypropylene. Order filter(s) separately.** Includes Fluorescent Illuminator (110VAC). Add

“-220” to the part number for 220VAC*** Acrylic is damaged by alcohol and other cleaning

agents.


DownDraFt work stationsThis work station is ideal for soldering or chemical processing that requires the removal of potentially hazardous fumes. Its powerful 1200 CFM blower draws exhaust fumes downward, away from the operator, for safe removal and purification. The activated charcoal filter removes 98% of most organic chemical vapors, allowing safe release.

Benchtops, made of cleanroom-grade white laminate, raise the work surface 32" off the floor. Exhaust fumes enter the filter through three perforated stainless steel platforms positioned at the center of the work surface. Specify other desired platform sizes or locations.

Benchtop Dimensions (32"H, including leveling feet)

110VAC/60Hz 220VAC/50HzCat. # Cat. # $/each

48"W x 30"D 1728-01 1728-01-220 4,131.0060"W x 30"D 1728-02 1728-02-220 4,561.0072"W x 30"D 1728-03 1728-03-220 4,927.0048"W x 34"D 1728-06 1728-06-220 4,151.0060"W x 34"D 1728-07 1728-07-220 4,582.0072"W x 34"D 1728-08 1728-08-220 4,993.00

Filters Cat. # $/eachActivated Charcoal 1716-00A 473.00HEPA 1681-02 273.00

Shownwithoptionalshelf

ShownwithGlovePorts Cat.#2003-37,$261.00/each.

ShownwithIrisPorts Cat.#1685-93,$421.00/pair.

mini-enVironment equipment enClosureInterchangeableaccessportsletyouconfiguretheoptimalenclosureforyourapplication—

SolidPanels AccessDoors GlovePorts MicroscopeBellows IrisPorts CustomInterfaceModules

These Mini-Environment Equipment Enclosures provide a controlled environment for delicate process equipment. Each includes dual front doors for easy access. The bottomless design allows convenient placement over equipment; select the optional spill tray if a bottom is required. Standard size: 49"W x 25"D x 30.25"H (without filter/fan module). Door opening: 22.38"W x 22.25"H (for each door).

SpillTray2"H tray safely contains chemical spills and is easy to clean. Cat. # $/each

Stainless steel 2003-35 492.00Polypropylene 2003-36 492.00

IonizingBarSee page 25 for installation information 22"L (4 emitters) 2005-06A 484.00 44"L (8 emitters) 2005-07A 696.00

MicroscopeBellows Cat. # $/each

See page 19; indicate desired location. 1681-53 234.00

Vapor-Sealed FluorescentIlluminator 2400-21 364.0027"L x 5"W x 3"H; dissipative PVC housing. 120VAC, 60Hz. Other voltages and special lighting available, including germicidal UV.

Room Air

Filtered Air

Exhaust Fumes

No.2003-20withoptionalfiltermoduleandsidedoors.

Temperature-controlledmodelsavailableinsizesupto120"W.

Filter/FanUnits(120VAC,50/60Hz)Includes 99.99% efficient HEPA filter. Adds 13" to height. Exit slots provided for air release. Cat. # $/each

6601-24-H 730.00

Mini-EnvironmentEnclosures CorrespondingSideAccessDoor*Material RightSide LeftSide

Cat. # $/each Cat. # $/each Cat. # $/eachAcrylic** 2003-20 2,543.00 2003-25 252.00 2003-30 252.00Static-Dissipative PVC 2003-21 3,299.00 2003-26 279.00 2003-31 279.00Polycarbonate 2003-22 3,378.00 2003-27 291.00 2003-32 291.00* Front access doors included (as in photos above). Side doors feature stainless steel frame and

chrome-plated lift latch. Opening: 15"W x 21"H** Acrylic is damaged by alcohol and other cleaning agents.


A B

A. BasicLaboratoryHoodsBy-pass design maintains stable face velocity, and vapor-proof or explosion-proof blower provides safe ventilation. Available in 47 and 70" widths, with a complete range of system options. Model shown: 3646-05.

B. Fiberglass30LaboratoryHoodsPowder epoxy-coated exterior is easy to clean; one-piece molded fiberglass interior resists most chemicals. By-pass design maintains stable face velocity, and pivoting air foil maximizes containment. Available with onboard exhaust blower. Model shown: 3646-49.

A.Basic47LaboratoryHoods:47"Wx25"Dx53"H WorkSurface†Incandescent

LampBlowerMotor

Equivalent Resistance

ShippingWeight

115VAC,60Hz 220VAC,50Hz***

10" dia 12" dia. lbs./kg Cat. # $/each Cat. # $/each Cat. # $/eachVapor Proof 1/3 HP 100' 250' 370/168 3646-00 3,636.00 3646-00-220 3,636.00 3646-02 956.00

Explosion-Proof** 1/2 HP, EP 100' 250' 375/170 3646-01 4,340.00 3646-01-220 4,340.00 3646-02 956.00Basic70LaboratoryHoods:70"Wx25"Dx53"H WorkSurface†

Vapor Proof 3/4 HP 45' 100' 450/204 3646-05 4,782.00 3646-05-220 4,884.00 3646-07 1,380.00Explosion-Proof** 3/4 HP EP 45' 100' 455/206 3646-06 5,277.00 3646-06-220 5,360.00 3646-07 1,380.00

* Maximum length of straight duct to achieve 100fpm face velocity. ** Bulb not included on explosion-proof models. *** International electrical configuration. †48"/72"W x 30"D x 1.25" thick black epoxy-coated steel

B.Fiberglass30LaboratoryHoods:30"Wx30.16"Dx48"H* WorkSurface† * Model 3646-48-220 is 54"H ** Maximum length of straight duct to achieve 100 FPM

face velocity *** International electrical configuration.† 48"/72"W x 30"D x 1.25" thick black epoxy-coated steel†† 1/10 HP (120V); 1/3 HP (220V)

BlowerMotor

EquivalentResistance**

ShippingWeight

115VAC,60Hz 220VAC,50Hz***

6" dia 8" dia. lbs./kg Cat. # $/each Cat. # $/each Cat. # $/eachYes†† 20' 80' 230/104 3646-48 3,425.00 3646-48-220 3,515.00 3646-50 602.00None — — 210/95 3646-49 2,986.00 3646-49-220 2,938.00 3646-50 602.00

laBoratory HooDs, Bio saFety CaBinets: from labconco


A. ProtectorXVS™VentilationStationsThis low-profile, large-capacity enclosure provides the perfect fume hood for analytical work, solvent cleaning, pathology and cytology studies. By-pass design maintains stable air velocity, and Clean-Sweep™ air foil minimizes “dead air” zones to maximize containment. Select FilterMate below for ventilation. Model shown: No. 3646-19/$2,550.00, with optional base stand, casters and work surface. Full specifications at TerraUniversal.com.

B. FilterMatePortableExhaustersIdeal for operation with the Protector XVS™, this system provides quiet exhausting and containment of contaminants. Select HEPA and/or carbon filter to remove powders, particulates or vapors. True bag-in/bag-out systems allows safe filter disposal. Model shown: 3646-36.

A B

Protector®XVS™VentilationStationsDimensions*

W" x D" x H" Cat. # $/each24.0 x 29.0 x 22.8 3646-18 1,618.0024.0 x 29.0 x 32.0 3646-21 2,563.0036.0 x 29.0 x 22.8 3646-19 2,197.0036.0 x 29.0 x 32.0 3646-22 3,145.0048.0 x 29.0 x 22.8 3646-20 3,145.0048.0 x 29.0 x 32.0 3646-23 3,617.00

* Internal Clearance: 21.6"/33.6"/45.6"W x 23"D x 20/29.3"H; Sash: 20° angle x 8" opening (22.8"H models), 14° angle x 10" opening (32"H models). Sash locking (open) position: 20"/29.25" respectively.

FilterMate™PortableExhausters(Allmodelsare23.0"Dx22.7"H)FilterUsage*

AirflowPotential

120VAC,60HzCat. # $/each

HEPA 250 CFM (60 – 100 fpm) 3646-36 2,544.00Carbon 250 CFM (60 – 100 fpm) 3646-37 2,219.00

HEPA/Carbon** 200 CFM (60 – 100 fpm)† 3646-38 2,809.00Carbon (2 req.) 200 CFM (60 – 100 fpm)† 3646-39 2,415.00

* HEPA included; order carbon filters below. ** HEPA filter may be replaced by a second carbon filter

HFx205 FormalDeHyDe meter from Hal technologies• Direct,real-timereadingofformaldehydeconcentrationinppmormg/m3

• Electrochemicalsensorensuresfastresponsetimes

• IncludesUSBdatadownloadfunction

This hand-held meter helps you monitor the presence of Formaldehyde (HCHO), a poisonous substance, in a wide range of manufacturing environments – a critical step in ensuring a safe workplace.

It includes side-access USB and power ports, temperature-corrected reading, and long operation from its rechargeable Lithium ion battery. The units’ reliable electrochemical sensing technology ensures fast response times (less than 30 seconds).

Range: 0 – 5 ppmResolution: 0.01 ppmSampling Method: Pump and pointing samplingMemory: Up to 500 sets of dataDimensions: 80 mm W x 36 mm D x 150 mm H Cat. # $/each

1510-40 873.00

laBoratory HooDs, Bio saFety CaBinets: from labconco


wet proCessing anD Cleaning

wet proCessing and Cleaning CaBinets

CompareTerra’sValueandVersatility

ValueDesignandEngineeringWhichever stations you choose, you’ll find flexible designs that let you specify the processing configuration for your application.

CompleteFacilityIntegrationTerra’s engineers and installation technicians work with yours to accommodate existing chemical delivery systems, fire suppression systems, exhaust disposal systems, and other facilities.

FireDetectionSystemsSpecify the fire safety measures for your application. Terra offers multi-spectral equipment that detects varying degrees of fire danger.

CustomWorkPut Terra’s comprehensive design and fabrication experience to work on your application!

Room Air

Filtered Air

Exhaust Fumes

Stainlesssteelprocessingcabinetsarerecommendedforsolventsandflammablechemicals(shownwithoptionalcastersandspraygun).

Polypropylenestationsareidealforacidsandcausticchemistries(shownwithoptionalgooseneckfaucets,sprayguns,castersandduplexpoweroutlets).

Fire-retardantpolypropyleneavailable!

• Incorporatesallprocessingcomponentsintooneself-contained,easy-to-cleansystem

• Isolatedcontrolpanelallowssafe,convenientoperationofbaths,rinsers,andotherprocessmodules

• Selectall-polypropyleneorstainlesssteelshell

• Standardsystemincludesslidingaccessshieldandfluorescentilluminator

• Customengineeredtomeetspecificapplicationrequirements!

Calltodiscussspecialrequirements—• FM4910andotherspecialtyplastics• PLCautomation• SEMIS2/S8andothercertifications• Chemicalhandlingsystems

QuickQuote Planner quickly configures a system to your specifications: www.TerraUniversal.com


wet proCessing and Cleaning moDular stations

VisitTerraUniversal.comforpricingandspecifications.Complete line oF system Features

GloveWashersNitrogenandDIWater SprayGuns

GooseneckFaucets Aspirators

Room Air

Filtered Air

Exhaust Fumes

StainlessSteelSolventCleaningBench

Optional Motorized Sliding Shield

• Benchesaccommodateacompletelineofbaths,rinsers,cleaners,andotherprocessingmodules

• Allpolypropylenemodelsarecompatiblewithmostacidsandotherprocesschemistries.

• Stainlesssteelmodelsaresuitableforsolventcleaningapplications.

• Selectamongthesestandardconfigurations:

StandardWetBench,shownwithVerticalLaminarFlowHoodandoptionalfaucetandsprayguns.

StandardWetBench StandardWetBenchwithoverheadcontrolcase

StandardWetBenchwithside control case


A. Sure-Grip®EXSafetyCanStorageCabinetsDesigned to meet OSHA and NFPA standards, these cabinets are sturdily constructed of all-welded, 18-gauge, double-walled steel with 1.5" of insulating air space for fire resistance. They include spill-slope safety shelves adjustable on 3" centers and dual vents with built-in arresters. All models shut and latch automatically when fusible links melt at 165°F (74°C) under fire conditions. Patented, concealed closing mechanism in self-close style maximizes available shelf space and minimizes risk of damage to the mechanism.

U-Loc™ padlockable paddle handle with slip resistant grip offers easy fingertip operation and reduces dangerous “catches” from passing traffic. Haz-Alert™ reflective labeling bursts with high visibility when illuminated by a flashlight beam, ensuring visibility of hazardous warning message. Sturdy galvanized steel SpillSlope™ shelves safely direct incidental spills to the back and bottom of the leak-proof sump. Includes leveling feet, grounding connector, and hazard warning in three languages. Backed by a 10-year warranty.

Capacity(gal.)

Dimensions(W x D x H)

ApprovalListing*

Doors/TypeCat. # $/each

30 43" x 18" x 44" FM, N. O 2 / manual 2800-00A 513.0030 43" x 18" x 44" FM, N. O, U 2 / self-closing 2820-00A 574.0045 43" x 18" x 65" FM, N. O 2 / manual 2820-02A 636.0045 43" x 18" x 65" FM, N. O, U 2 / self-closing 2820-03A 699.0060 34" x 34" x 65" FM, N. O 2 / manual 2820-05A 767.0060 34" x 34" x 65" FM, N. O, U 2 / self-closing 2820-06A 833.00

* See key below.

B. CorrosiveStorageCabinetsThese steel cabinets feature a two-part enamel coating which has been tested successfully with widely used acids, caustics, and alkalines, such as hydrochloric acid 37%, sulfuric acid 33%, and sodium hydroxide. This surface will not allow absorption that could cause subsequent problems. The 22-gallon model is an Under-the-Counter Cabinet, with polypropylene-lined bottom and top, and a .75-inch tray top, which can completely contain a 5-pint spill. The other three models, which are floor-mounted, feature corrosive-resistant polyethylene trays, to contain spills, on the bottom and on the shelves.

Capacity(gal.)

Dimensions(W x D x H)

ApprovalListing*

Doors/TypeCat. # $/each

30 43" x 18" x 44" FM, N, O 2 / manual 2820-09A 600.0045 43" x 18" x 65" FM, N, O 2 / manual 2820-10A 708.0045 43" x 18" x 65" FM, N, O, U 2 / self-closing 2820-11A 793.0022 35" x 22" x 35" FM, N, O 2 / manual 2820-12A 543.00

* See key below.

C. PolyethyleneAcidStorageCabinetsThese one-piece Polyethylene Acid Storage Cabinets provide the ideal storage solution for wet processing acids and other chemistries.

Undercounter Cabinet features two internal compartments, each with an adjustable poly shelf that helps organize and segregate incompatible liquids. Separate pull-out sumps underneath the cabinet capture incidental leaks. The cabinet top doubles as a handy workspace. Two vent holes are included on the backside. The cabinet secures to the wall for stability and accepts a padlock. Capacity: (30) 1-liter bottles or a variety of containers. 36"W x 22.5"D x 36"H. Cat. # $/each

2820-32 724.00

CountertopCabinet includes an easy-clean internal polyethylene spill tray to contain incidental leaks. A separate polyethylene tray slides out from under the cabinet and can be used as a handy work tray. The door can be hinged from either side for best countertop surface use. Capacity: (2) 4-liter bottles of acids or bases. 14.25"W x 16.25"D x 19.5"H. Cat. # $/each

2820-31 297.00

ForDisposalBottles:TerraUniversal.com

ApprovalListingandRegulationKeyFM Factory Mutual tested and approvedN Designed in accordance with National Fire Protection

Association (NFPA) code 30 regulationO Complies with OSHA regulationsU Complies with Uniform Fire Code

No.2820-00AandNo.2800-00AA

B

C

CHemiCal storage: by Justrite


A.–C.DiscoverySeries CleaningandProcessingBench

The Discovery Series Wet Processing System offers the ideal price performance and value for R&D and small production environments that require both budget and development flexibility.

Designed in 2', 4', 6', 8' and 10'-W configurations, it is available in polypropylene, FM4910 plastics, and stainless steel for work with a variety of substrate sizes and a diverse range of temperatures and chemistries, as well as recirculation, filtration, and agitation. Its modular design accepts tanks, rinsers and other processing units, including the Dual Beaker Agitation tool, which incorporates a PLC touch screen panel for easy menu selection and operation.

A front safety sash provides full front coverage, and a minihelic gauge monitors exhaust pressure. It also includes an oversized EPO emergency shut-off switch. Built to Semi S2/S8 and CE standards, it is available with a variety of third-party certifications, including UL listing.

Calltodiscussyourwetprocessingrequirements.

D. “Mini-Meg”Megasonic LabSystem

This fully functional megasonic system comes in a portable, low-cost design. Ideal for use in a fume hood or small wet bench, it allows comprehensive megasonic test capabilities associated with systems twice the price. Its compact, two-channel generator, which allows fully programmable recipes, provides 500W and two outputs per channel. Tanks are available in PVDF, quartz and stainless steel. Select Teflon-coated or stainless steel transducer array, with full-on or multiplex operation with liquids from ambient to 70°C.

Systemsstartat$9,995.00!

E. QaSeriesQuartzConstant-TemperatureBath

Ideal for etching, stripping and cleaning, these high-purity baths are available in several sizes and control configurations.

F. DRSeriesWaferDumpRinserNatural polypropylene rinser tanks, DI manifold tubing, and spray nozzles ensure compatibility with most process chemistries.

VisitTerraUniversal.comforcompletespecificationsandorderinginformation!

High-PurityQuartzBath

PLCTouchscreenPanel

High-PurityQuartzBath

DRSeriesDumpRinser

B

FE

C

Low-CostMegasonicSystem–Startsunder$10,000!

D

DualBeakerAgitator

A

otHer wet Cleaning anD proCessing solutions


A. EnclosedSafetyShowerProtect your personnel against hazardous chemical burns! This fully enclosed polypropylene booth features easy-parting PVC strip curtains and immediate-response handles that activate an overhead shower and eye washers. All hardware is cleanroom compatible and chemical resistant. The sloping bottom feeds into a 21/2" drain line. Overall dimensions: 39"W x 42"D x 96"H. Cat. # $/each

1530-50 7,200.00

B.–D.AcidTransportCartsMade of stress-relieved polypropylene. All three designs feature recessed receptacles that collect spills into an easy-empty containment reservoir. Acid-resistant neoprene swivel casters are included.

Type B features 12 or 18 removable 7" x 7" inserts for one-gallon bottles.

Type C is ideal for larger, heavy containers. Compartments: two @ 17" x 26.5" x 17" and two @ 17" x 26.5" x 14"

Type D features 24 angled 7" x 7" slots for one-gallon bottles and one top compartment for gloves, safety glasses and other small items.

E. FlammableMaterialsCartThis cart allows safe transport of two 5-gallon chemical storage containers. Its 4"-diameter urethane locking casters ensure clean, smooth rolling and easy maneuvering. The on-board fire extinguisher helps meet OSHA and other safety requirements. Cat. # $/each

7018-40 4,767.00

F. DesiCart™MobileDesiccatorProtect your stored materials against particles and moisture during transport! Equipped with an optional Quick Connect fitting, these mobile desiccators can be purged with clean, dry nitrogen when not in motion. Their sealed chamber preserves the low-humidity, particle-free environment during transit. Material Cat. # $/each

Acrylic 4002-50B 2,674.00 Static-Dissipative PVC 4002-51B 4,018.00

G. ChemicalSafetyCabinetThis electropolished 304 stainless steel enclosure features adjustable perforated shelving to accommodate chemical containers of many sizes. Dual locking doors provide security, and heavy duty locking casters facilitate chemical transport throughout your facility. Complies with OSHA/NFPA fire safety regulations. Overall dimensions: 43"W x 18"D x 65"H. Cat. # $/each

6012-70 13,457.00

Reducedpricesonallhandwashers/dryers

A B C

D

E F G

PolypropyleneAcidTransportCartsType

(see photos)No.of

Compnts. Cat. # $/each

B12 3401-00 2,166.0018 3401-01 2,641.00

C 4 3401-30 2,484.00D 25 3401-31 3,136.00

CHemiCal HanDling


Seespecifications/orderingchartbelow.

A. High-CapacityChamber (see chart below)Ideal for degassing large assemblies. Powder-coated steel chamber with 1"-thick aluminum door. Includes 1"-thick polycarbonate viewing window, piping, fittings and solenoid valve for convenient control (order pump and vacuum controller separately). 18"W x 48"L stainless steel shelf creates a convenient platform 4.5" above chamber floor. Powder-Coated Steel Stand Cat. # $/each

Raises chamber shelf to 34.6" above floor level 3404-04 1,189.00

B. StainlessSteelChamber (see chart below)Double-wall construction; includes 8" x 8" tempered glass viewing window and dual metering valves and 0-30" vacuum gauge.

C. AluminumChamber (see chart below)1"-thick walls; includes dual metering valves and 0-30" Hg vacuum gauge. Powder-Coated Steel Stand Cat. # $/each

Raises chamber 17"; includes casters. 1590-61 596.00

D. Full-ViewAcrylicChamber (see chart below)Made of 1/2"-thick cylindrical acrylic. Designed for continuous pump operation with safety relief valve.

E.–J. AcrylicChambersSeechartbelow.Ideal for degassing and transporting small parts. Designed for continuous pump operation (order below).

VacuumChamberAccessories Cat. # $/each

MeteringValves(installed) 5235-09 168.00Two required for direct connection to pump, or one if connecting Vacuum Controller.

VacuumGauge(installed) 5235-10 206.00Required if selected pump does not include metering kit.

VacuumControllerRecommended for all continuous vacuum applications. For Full Vacuum (to 29.9" Hg). Select appropriate Turnkey Connection Kit below. Cat. # $/each

120VAC, 60Hz 1681-75 2,741.00 220VAC, 50Hz 1681-75-220 2,741.00

ConnectionKitIncludes all connections, vacuum, solenoid, turnkey installation and testing charges. Cat. # $/each

For Type A–C Chambers 5400-25 1,524.00 For Type D–J Chambers 5400-24 1,524.00

VacuumChambersType Dimensions(W" x D" x H") Max.

VacuumCat. # $/eachOutside Inside

A 49L x 30 dia. 48L x 26 dia. 29.9" Hg 3404-03 22,922.00B 13 x 15 x 14 8 x 12 x 8 29.9" Hg 3404-00 3,206.00C 31.4 x 25.4 x 18.8 30.4 x 24.4 x 17.8 29.9" Hg 1590-60 10,966.00D 12-dia. x 14.5H 11"-dia. x 13.5 29.8" Hg 5235-08 2,254.00E 17 x 11 x 12.5 14 x 8 x 9.5 29.9" Hg 5235-00A 2,147.00F 13 x 13 x 7.5 10.5 x 10.5 x 4.5 29.9" Hg 5235-01A 1,603.00G 9 x 9 x 9.5 6 x 6 x 6.5 29.9" Hg 5235-02A 1,384.00H 13 x 13 x 10.5 10 x 10 x 7.5 29.9" Hg 5235-03A 1,876.00I 17 x 17 x 13.5 15 x 15 x 11.5 29.9" Hg 5235-04A 2,221.00J 26.5 x 11 x 12.5 11 x 8 x 9.5 29.9" Hg 5235-06A 2,435.00

Shownwithoptionalstand,vacuumpumpand controller

–

A

B C

D E J

Customdesignstoyourspecifications!

No.1590-68

Fulllineoflaboratorypumpsavailable!Callforarecommendationonaturnkeysystemconfiguredtoyourrequirementsforcleanliness,vacuumlevelandpumpingspeed.

VaCuum CHamBers


No.1694-02C,shownwithoptionalpass-throughvacuumovenandlow-humiditycontrollers

No.1694-13B,shownwithoptionalDualPurgeSystem,VacuumAntechamberandControlModule

Series100Polymer GloveboxesTerra’s Series 100 Polymer Gloveboxes provide a clean, low-humidity environment for critical processing operations. Their modular design lets you select the options you need for your application.

Dual side access doors open inward to allow easy parts transfer from inside the chamber. Doors feature stainless steel reinforcement frames that increase the structural rigidity of the door by a factor of five. A built-in LiftLatch securely seals the door without applying lateral torque that could damage hinges.

Series100PlasticGlovebox

Series300StainlessSteelGloveboxThe ideal isolation enclosure for a wide range of operations requiring control of particles, humidity, and temperature. Select among several different sizes for one or two operators. Automatic humidity control systems regulate a purge of process gas to maintain user-determined %RH set point. Available in many configurations, with air locks, pass-through ovens, ionization, humidification and sterilization modules.

Perfect for parts degassing, temperature and humidity testing, chemical mixing, and other processes requiring a non-reactive environment.Systemstartsat$4,917.00

AirLockProvidesConvenient

Access.

Series400StainlessSteelGloveboxLike the Series 300 chamber shown at left, this isolation glovebox protects delicate materials against particles, humidity, static discharge, and other environmental threats. Its larger chamber size accommodates Terra’s Vacuum Antechamber, which provides a practical way to remove moisture as items are moved in and out of the main processing chamber.

Choose between single and twin models, with right or left-side air locks. Custom modifications are available on all Terra gloveboxes; just let us know your requirements!Systemstartsat$8,075.00

Series100gloveboxesareavailableinfivematerials:Acrylic— strong, rigid material offers full visibilityStatic-DissipativePVC — protects against static discharge and eliminates static attractionsNon-DissipativePVC— resists a wide range of chemicals, including most disinfectantsPolypropylene — ideal for chemical mixing or use with acidsPolycarbonate— strong and resistant to chemical and thermal shock

Select among a full range of options for control of particles, static charges, and humidity.Systemsstartat$1,301.00

AcrylicchamberNo.1689-00G

Series100AcrylicGlovebox,shownwithoptionalfiltration module andairlock.

PolypropyleneNo.1681-29F

gloVeBoxes: isolation and Containment Chambers


No.1694-33A(twolinkedtogether) No.9670-00B,shownwithright-sideairlock

Radius corners simplifycleaning,eliminate seams and cracks

Insulatedchambersavailable

Series500Full-ViewGloveboxThis enclosure features transparent front and back panels, made of static-dissipative PVC or polycarbonate, with opposing glove ports for convenient dual-side access to work in progress. This design combines full chamber visibility with the strength of a stainless steel glovebox.

It features a large chamber—up to 96"W x 36"D x 30"H—for work with bulky process equipment. A full range of controller systems provides protection against particles, static charges, and humidity. Terra’s smart gas controllers regulate the purge of nitrogen or other process gas to maintain the humidity set point you require. Systemsstartat$5,767.00

Series600Front-ViewGloveboxThis chamber provides a sloping front panel of transparent polycarbonate or safety glass for full visibility of work in progress. Like the Series 500 model at left, it accommodates Terra’s complete line of environmental control systems to automatically maintain a particle-free, controlled-humidity, static-safe environment. Multiple chambers can be cascaded together to expand working space. Standard chamber size: 37.5"W x 29"D x 39"H.Systemstartsat$7,389.00

RefrigeratedGloveboxIdeal for many testing and processing applications, Terra Universal’s Constant Temperature Control System incorporates heating and refrigeration modules that maintain a stable temperature between -25°F and 120°F inside a fully integrated glove box. The complete system consists of a compressor/condenser, a heater, and an evaporator cooler with an integral fan mounted inside the chamber. The closed-loop refrigeration unit operates with CFC-free coolant and uses a RTD sensor with an internal bypass to prevent temperature overshoot. The sensor provides continuous temperature display, and a standard controller allows the user to establish a constant temperature set point. PLC-based recipes are available for multiple temperature cycles.Fullyintegratedsystemsstartunder$13,400.00

Series300GloveboxwithConstantTemperatureModuleNo.1694-75

BioSafe™StainlessSteelGloveboxThis glovebox features smooth, ultra-clean interior surfaces that eliminate germ traps, making it ideal for aseptic requirements. Continuous-seam welds and rounded corners create a hermetically sealed enclosure that’s easy to clean and sterilize. Tempered glass or polycarbonate viewing windows afford full chamber visibility, and optional side air locks allow convenient parts transfer. Optional access panels are available for transfer of large process equipment. Select between two sizes, with either polycarbonate or safety glass viewing window.Systemstartsat$18,514.00

CustomWorkisNoProblem!ContactTerratodiscussyouruniquerequirements.

Insulatedchambers available

gloVeBoxes: isolation and Containment Chambers


StainlessSteelTops• StainlesssteelworksurfacemeetsClass100particle

requirements

• Choiceofadjustable“A”baseornonadjustable“C”baseavailableineitherfinishedsteelorstainlesssteel

• Groundterminalsandwrist-strappinconnectorsalloweasygroundingofionizingguns,wriststraps,andotherstaticprotectionequipment

Cleanroom work stations

LaminateTops• SealedlaminatetopdesignmeetsClass100particle

requirements

• Static-dissipativelaminate(106to108ohms/sq.)safelydissipateschargestoreducepossibilityofelectro-staticdischarge(meetsMIL-B-81705-Bspecifications)

• Selectadjustable“A”baseorrecessed“C”basetosuityourapplicationrequirements

• Optionalmodularoverheadfluorescentlightfixtureprovidesshadow-freeviewinganywhereonbenchtopsurface

• Optionalionizingfanprovidessafe,reliable,staticneutralization

StainlesssteelC-Basebench (No.1521-55)andoptionaldrawerunit

Static-dissipativeC-BaseBenchNo.1521-32,withNo.1524-50uprights,1700-76light,1700-90shelfand1740-07drawer.

IonBar™ (with fan module)Projects a balanced stream of positive ions for neutralization of static charges throughout a restricted area. Requires shelf and shelf support for fixed installation. Can be used with any Terra bench. Cat. # $/each

22"Long 2005-30 857.0033"Long 2005-32 968.0044"Long 2005-31 1,079.00

304StainlessSteelTopw/FinishedSteelBase* LaminateTopsBenchtopDimens.(W" x D")

SolidTop PerforatedTop(.75" ID Hole)** NonconductiveTops StaticDissipativeTops“A”BaseDesign

(telescoping legs)

“C”BaseDesign

(recessed legs)

“A”BaseDesign

(telescoping legs)

“C”BaseDesign

(recessed legs)

“A”BaseDesign

(telescoping legs)

“C”BaseDesign

(recessed legs)

“A”BaseDesign

(telescoping legs)

“C”BaseDesign

(recessed legs)

Cat. # Cat. # $/each Cat. # Cat. # $/each Cat. # Cat. # $/each Cat. # Cat. # $/each48 x 30 1521-45 1521-54 1,109.00 1522-56 1522-66 1,412.00 1722-00 1521-09 609.00 1728-00 1521-31 943.0060 x 30 1751-00 1521-55 1,198.00 1522-57 1522-67 1,521.00 1724-00 1000-00 670.00 1730-00 1521-32 966.0072 x 30 1752-00 1521-56 1,257.00 1522-58 1522-68 1,741.00 1726-00 1000-01 680.00 1732-00 1521-33 1,009.0084 x 30 1521-46 1521-57 1,311.00 1522-59 1522-69 1,924.00 1521-01 1000-02 758.00 1521-23 1521-34 1,015.0096 x 30 1753-00 1521-58 1,349.00 1522-60 1522-70 2,087.00 2402-00 1000-03 813.00 2400-00 1521-35 1,169.0048 x 34 1521-49 1521-61 1,199.00 1522-61 1522-71 1,420.00 1723-00 1521-16 654.00 1700-29 1521-38 977.0060 x 34 1700-65 1521-62 1,294.00 1522-62 1522-72 1,681.00 1725-00 1521-17 683.00 1731-00 1521-39 1,004.0072 x 34 1700-66 1521-63 1,336.00 1522-63 1522-73 1,836.00 1727-00 1521-18 727.00 1733-00 1521-40 1,059.0084 x 34 1521-50 1521-64 1,408.00 1522-64 1522-74 2,134.00 1521-05 1521-19 797.00 1521-27 1521-41 1,145.0096 x 34 1521-51 1521-65 1,462.00 1522-65 1522-75 2,409.00 1521-06 1521-20 849.00 1521-28 1521-42 1,213.00

* Stainless Steel Scuff Guards included on finished C-Base benches; order separately for A-Bases. Nonadjustable (one piece) legs also available with “A” Base design at no additional cost (specify when ordering). Finish is white powder coat.

** For .25"diameter perforations, add $32/ft. of width to the standard pricing.



Stainless SteelDrawers

Stainless Steel Leg Member

StainlessSteelLegMemberReplaces lower leg of A-Base benches to guard against scuffs. Cat. # $/each

1741-25 30.00

Chemical-ResistantTops• Lightweightpolypropyleneworksurfaceprovidesoptimal

protectionagainstacidsandothercausticchemicals

• Cleanroom-compatibledesignmeetsClass100particlerequirements

• Perforatedtopwithplenumchamberavailableforventingfumesduringwetprocessingoperations

• Raised“ship’sedges”availabletocontaindangerousspills

• Modularoverheadfixturehousesthree-positionfluorescentlight(orderseparately)

A-BaseBenchNo.1522-01,shownwithoptionaldrawers

ShelfandLightSupports For Light/Shelf For Shelf Only (36") (18") Material Cat. # $/pair Cat. # $/pair

Stainless Steel 1525-68 284.00 1525-69 206.00Finished Steel 1524-50 131.00 1524-51 104.00

CleanroomDrawers(SeeCat.#105,page349forothermodels)No.ofDrawers

Min.DrawerHeight

ABSPlastic(141⁄8"W x 151⁄4"D)

304StainlessSteel(16"W x 18"D)

Cat. # $/each Cat. # $/each1 3" 1740-23 159.00 — —1 6" 1740-02 168.00 1741-20 215.001 12" 1740-98 207.00 1741-21 291.002 3", 6" 1740-14 327.00 — —2 6", 6" 1740-15 337.00 1741-22 429.002 6", 12" 1740-06 376.00 1741-23 506.003 3", 6", 12" 1740-07 508.00 — —3 6", 6", 6" 1740-09 505.00 1741-24 645.004 3", 3", 6", 6" 1740-08 655.00 — —

PolypropyleneTops CorrespondingAccessoriesBenchtopDimens.(W" x D")

PolypropyleneSolidTop FluorescentLightFixtures(finished steel)

304StainlessSteelShelf(12" X 1.25")

(Fits on either upright)

NonconductiveShelf

(12" X 1.25")(Fits on either upright)

Static-DissipativeShelf

(12" X 1.25")(Fits on either upright)

“A”BaseDesign

(telescoping legs)

“C”BaseDesign

(recessed legs)Cat. # Cat. # $/each Cat. # $/each Cat. # $/each Cat. # $/each Cat. # $/each

48 x 30 1522-00 1522-14 914.00 1524-78 572.00 1525-26 574.00 1527-07 132.00 1524-80 240.0060 x 30 1522-01 1522-15 956.00 1700-76 623.00 1525-27 609.00 1000-65 135.00 1700-90 246.0072 x 30 1522-02 1522-16 982.00 1700-78 670.00 1525-28 639.00 1000-66 144.00 1700-92 266.0084 x 30 1522-03 1522-17 990.00 1527-00 702.00 1525-29 655.00 1000-67 150.00 1527-35 273.0096 x 30 1522-04 1522-18 1,139.00 1700-80 758.00 1525-30 681.00 1000-68 158.00 1700-94 286.0048 x 34 1522-07 1522-21 956.00 1524-78 572.00 1525-26 574.00 1527-07 132.00 1524-80 240.0060 x 34 1522-08 1522-22 979.00 1700-76 623.00 1525-27 609.00 1000-65 135.00 1700-90 246.0072 x 34 1522-09 1522-23 1,034.00 1700-78 670.00 1525-28 639.00 1000-66 144.00 1700-92 266.0084 x 34 1522-10 1522-24 1,118.00 1527-00 702.00 1525-29 655.00 1000-67 150.00 1527-35 273.0096 x 34 1522-11 1522-25 1,189.00 1700-80 758.00 1525-30 681.00 1000-68 158.00 1700-94 286.00

* Frame and legs feature a powder-coat finish. C-Base includes stainless steel scuff–guards to protect against scratching (order separately for A-Base).

32"HBaseStyles: Telescoping

“A”Base–Adjustable 25"-34"H

Recessed “C”Base


No.1570-53A-StainlessSteelTop

Vibration-FreeWorkStation• Pneumaticvibration-freemountsisolateupto90%ofbuilding

vibration,eliminateoperatorfatigueandnauseaduringmicroscopeoperations

• Low-profile,ergonomicdesigncombinesstabilitywithconvenience

• Built-inpneumaticcontrollersimplifiesleveling,allowscontinuousin-lineoperation

• Suitableforcleanroomuse

• Bumperisolatesfrontedge,providesanarmrest.

• Selectworksurfacematerialforyourapplication:nonconductiveanddissipativelaminates,stainlesssteel,andUltraClean™electropolishedstainless steel

• AvailableinUltraClean™FinishedStainlessSteelforthemostcriticalcontamination requirements

Vibration-FreeWorkStations NonconductiveLami-nateTop

StaticDissipativeLaminateTop

304StainlessSteelTop ElectropolishedStain-lessSteelTop,Frame

& LegsWork Surface

Dimensions(W" x D")

Numberof

Isolators

MaximumLoad*

(lbs.)

“A”BaseDesign** “A”BaseDesign** w/FinishedCR SteelFrame,Legs“A”BaseDesign**

AllStainlessSteelConstruction

“A”BaseDesign**

“A”BaseDesign**

Cat. # $/each Cat. # $/each Cat. # $/each Cat. # $/each Cat. # $/each48 x 30 4 360 1570-00A 1,878.00 1570-26A 2,079.00 1570-52A 2,303.00 1570-80A 2,776.00 1570-80-2A 3,159.0060 x 30 4 350 1570-01A 1,912.00 1570-27A 2,114.00 1570-53A 2,379.00 1570-81A 2,879.00 1570-81-2A 3,298.0072 x 30 6 550 1570-02A 1,927.00 1570-28A 2,135.00 1570-54A 2,430.00 1570-82A 2,967.00 1570-82-2A 3,425.0084 x 30 6 540 1570-03A 1,980.00 1570-29A 2,297.00 1570-55A 2,550.00 1570-83A 3,141.00 1570-83-2A 3,638.0096 x 30 6 530 1570-04A 2,088.00 1570-30A 2,411.00 1570-56A 2,650.00 1570-84A 3,279.00 1570-84-2A 3,772.0048 x 34 4 360 1570-07A 1,825.00 1570-33A 2,108.00 1570-59A 2,380.00 1570-87A 2,869.00 1570-87-2A 3,128.0060 x 34 4 350 1570-08A 1,880.00 1570-34A 2,163.00 1570-60A 2,495.00 1570-88A 2,969.00 1570-88-2A 3,389.0072 x 34 6 550 1570-09A 1,950.00 1570-35A 2,190.00 1570-61A 2,646.00 1570-89A 3,141.00 1570-89-2A 3,600.0084 x 34 6 540 1570-10A 2,078.00 1570-36A 2,391.00 1570-62A 2,734.00 1570-90A 3,413.00 1570-90-2A 3,563.0096 x 34 6 530 1570-11A 2,117.00 1570-37A 2,521.00 1570-63A 2,871.00 1570-91A 3,459.00 1570-91-2A 3,637.00

* Maximum loads with plate weights removed. ** Nonadjustable (one piece) legs also available with “A” base design at no extra cost (specify when ordering). Select stainless steel scuff guards to protect finished steel legs. See page 19.

GraniteIsolator• Low-cost,easy-cleanplatform—

simpledesignrequiresnoairsupply

• Polishedgraniterestsonsiliconeisolators,providing2.4Hzhorizontalnaturalfrequency

Top (W x D) Cat. # $/each

13" x 15" 1580-20 571.00 16" x 21" 1580-21 992.00 18" x 26" 1580-23 1,271.00

High-PerformanceVibrationIsolationTables,fromTMC• PatentedGimbalPistonIsolatorsachieveboth

horizontalandverticalisolationdowntoverylowinputlevels(completeisolationspecsatTerraUniversal.com)

• Modular,ergonomicdesignenhancesfunctionalityand comfort

• Cleanroom-compatibleconfigurationincludesductedairexhaustforclean,particle-freeoperation

These vibration-isolation tables are ideal for applications in electrophysiology, cell injection, photomicroscopy and other critical applications. All models come with stainless steel top; cleanroom-compatible models include all-SS construction and ducted exhaust. Isolation efficiency: 90 – 97% @ 10 Hz. Low input specification (natural frequency): 1.5 – 2.0 Hz (vertical), 1.2 – 1.7 Hz (horizontal). Net load capacity: 500 lbs. Requires 80 psi air or nitrogen.

TopDimensions

(W x D)

StainlessSteelTopwithPowder-CoatedFrame

All-StainlessSteelCleanroomModels*

Cat. # $/each Cat. # $/each30" x 30" 3435-12 3,292.00 — —36" x 30" 3435-13 3,153.00 3435-00 5,308.0048" x 30" 3435-14 3,381.00 3435-01 5,408.0060" x 30" 3435-15 3,526.00 — —48" x 36" 3435-16 3,470.00 3435-02 5,612.0060" x 36" 3435-17 3,455.00 3435-03 5,708.00

* Includes armrest. Available with electropolished finish.

Cleanroom ViBration isolation work stations


Vibration-FreePlatform• Portablelow-profiledesignallowsformultiple

vibration-freeworkstationsonasinglebench

• Pneumaticvibration-isolationmountsdampenupto90%ofbuildingvibration,eliminateoperatorfatigueandnauseaduringmicroscopeoperations

• Alsoisolatesvibration-producingequipmentfromthework surface

• Availableinseveralsizesandmaterials,includingUltraClean™electropolishedstainlesssteel

• Easytosetupandrelocate

Specifications Vibration-FreePlatformWorkSurface

(W" x D" x H")

MaximumLoad*

(lbs.)

UltraClean™Finish304StainlessSteelTop

Cat. # $/each21.75 x 18.25 x 3 213 1580-02 2,287.00

23 x 24 x 3 213 1580-03 2,591.00* Internal plate weight should be removed before operation with net

loads over 100 lbs.

ID: 213:48 06-22-84 SPEED: LOW HORIZ: -86µM

SCAN: 150µM VERT: -495 A

M CUR: 172 AR CUR: 667 A

@ 11µM@ 97 µM

SLOAN DETAK II

O 20 40 60 80 100 120 140

O

200

400

600

800

1,000




@ 11µM@ 97 µM

SLOAN DETAK II

O 20 40 60 80 100 120 140

O

200

400

600

800

1,000M R M R




@ 11µM@ 97 µM

SLOAN DETAK II

O 20 40 60 80 100 120 140

O

200

400

600

800

1,000




@ 11µM@ 97 µM

SLOAN DETAK II

O 20 40 60 80 100 120 140

O

200

400

600

800

1,000M R M R

TestresultsbyaSloanDektakIISurfaceProfileMeasuringSystemwithandwithoutTerra’sVirbration-FreePlatform.

SneezeGuardIdeal for microscope work. 7.12" x 7.25" with eyepiece cut-out. Acrylic Dissipative PVC Cat. # $/each Cat. # $/each

1601-50 14.00 1601-51 26.00

work taBles: by intermetroVersatilelinesoflabtablesinmanysizes,materials,topdesignsandoptionconfigurations—seecompleteorderinginformationatTerraUniversal.com.

A. Stainless steel lab table, No. 1533-84 / $864, shown with optional shelf, drawer, keyboard tray and monitor arm

B. Stainless steel worktable with backsplash, No. 1533-70 / $764, shown with optional wire shelf

C. Electropolished stainless steel table with adjustable solid shelf (72" x 30"), No. 1305-01 / $932

D. Electropolished stainless steel table with 3-sided frame (72" x 30"), No. 1305-07 / $778A B

DC



Cleanroom CHairs

Class100StaticControl#2802-62



Class100#1013-08

Class100#1013-52

E.–I. Class100&StaticControl

Clean vinyl meets Class 100 particle requirements. Static-Control chairs feature dissipative vinyl, conductive casters, and grounding chains.

E F G H I

Specs Class100StaticControl Class100Height Color E. F. G. H. Color I.


DeskBlack 2802-61 529.00 2802-67 487.00 2802-73 546.00 1012-05 582.00 Black 1012-11 569.00Blue 2802-62* 529.00 2802-68* 487.00 2802-74* 546.00 1013-08 563.00 Black 1013-51 655.00

BenchBlack 2802-64 536.00 2802-70 490.00 2802-76 553.00 1012-41 477.00 Black 1012-12 569.00Blue 2802-65* 536.00 2802-71* 490.00 2802-77* 553.00 1013-12 563.00 Black 1013-52 655.00

* Quick ship models – usually ship within one week!


ErgoHeight™Auto-AdjustingCleanroomWorkstationsThis ergonomic workstation brings the work surface to any of four pre-selected heights at the press of a button—ensuring optimal worker comfort and eliminating back stress!

Its sealed design isolates the motor to minimize particle generation, making it compatible with Class 100/ISO 5 cleanliness requirements. Front-panel controls ensure easy operation. See TerraUniversal.com for other sizes and top materials.Benchtop Size Laminate Top Stainless Steel Top (W" x D") Cat. # $/each Cat. # $/each

36 x 30 3504-16 2,663.00 3504-04 3,100.00 48 x 30 3504-17 2,769.00 3504-05 3,205.00

Captionsindicatemodelsshown.VisitTerraUniversal.comforother

sizesandstyles.

laBoratory stools

No.2804-17$365.00

No.2804-32$309.00

No.2804-86$172.00

No.2804-63$209.00 No.2804-68

$213.00

J.–N. LaboratoryChairs

Select from our large assortment of Laboratory Chairs. Types J-L are upholstered chairs built with ergonomic benefits. Types M and N meet durability and budget needs.

Ergonomic Upholstered#2801-05



Urethane#1013-16

Ergonomic ESD

#1012-24

J K L M N

Specs ErgonomicUpholsteredChairs* Specs UrethaneChairs** ESDChairHeight Color J.w/SeatControl K.Standard L.LargeBackrest Color M. N.


DeskBlack 2801-01 366.00 2801-33 316.00 2801-65 332.00

Black1013-16 277.00 1012-14 477.00

Blue 2801-02 366.00 2801-34 316.00 2801-66 332.00 1013-17 343.00 1012-19 543.00

BenchBlack 2801-05 416.00 2801-37 318.00 2801-69 336.00

Black1013-18 357.00 1012-24 543.00

Blue 2801-06 416.00 2801-38 318.00 2801-70 336.00 — — 1013-46 629.00* Available in Grade 2 Vinyl or Grade 4 Breathable Nylon. Visit TerraUniversal.com for more color options.** More configurations available on the website.

workstations and CHairs


TerraDesigns,Builds,andEquips TurnkeyR&DandProcessingFacilitiesTerra modular clean rooms and laboratories convert any space into a controlled environment. At a fraction of the cost of a conventional clean room, and a production schedule of weeks instead of years, you receive a fully integrated, free-standing facility optimized to your requirements.

• Anysizeorfloorplan — from single room to multi-suite• Anycleanlinessrating — down to Class 10 / ISO 3• BioSafe™All-SteelDesigns — smooth steel interiors simplify sterilization,

double-wall design provides sturdy, free-standing structure• HardwallPlasticDesigns — acrylic, static-dissipative, polycarbonate or

polypropylene• SoftwallPanelDesigns — economical cleanroom-grade vinyl curtains and

strip shields• Humidification/dehumidification• Air conditioning, rapid-operation doors, UV and other special lighting

BioSafe™power-coatedsteelcleanroom

Softwallcleanroom BioSafe™stainlesssteelcleanroom

QuickQuote Planner quickly configures a system to your specifications: www.TerraUniversal.com

moDular Cleanrooms anD laBoratories


Interiorgowningareas

Multi-roomBioSafe™cleanroomAnti-microbialcoatingshelpinsureanasepticprocessingenvironment

Anyceilingheight

StainlessSteelBioSafe™CleanroomwithGlassPanels

moDular Cleanrooms anD laBoratories


Pass-Throughs and Air Showers allow contamination-free transfer of personnel and products in and out of the cleanroom. Terra offers the most comprehensive selection of designs and features available anywhere —

HundredsofStandardConfigurations304/316 stainless steel • chemical-resistant and static-safe plastics • clean laminates • HEPA air showers • wall and floor-mount designs • mechanical interlocks • slide-up or swing doors • shelves and special lighting

No-ClearanceRoll-UpDoorPass-ThroughsSeveral standard sizes • PLC control panel includes safety and security features • electronic interlock prevent cross-contamination • HEPA air showers

Application-SpecificDesignsFire-rated models • active and passive ventilation modules remove fumes • electropolished models meet the most strenuous cleanliness requirements • smooth, radius corners eliminate cracks that harbor contaminants

A.AcrylicPass-Through No. 1993-12C / $856, mounted to a Terra hardwall modular cleanroom.

B.StainlessSteelPass-Through No. 6705-26C / $4,426—models available in 15 standard sizes.

C.Slide-UpDoorPass-ThroughNo. 1993-18A, available for many chamber sizes and materials.

D. Fire-Rated and Resistant Pass-Throughs No. 6705-00 Fire-Resistant Pass-Through—fire-rated models with UL-B listing for 1.5 hour flame test also available.

HEPA-filteredairjetsremovecontaminants

Customworkisnoproblem––Terrabuildstoyourspecifications

A B C

FED

E. CleanTop™ Stainless Steel Sloping Top No. 6705-16, shown on a 24"W x 48"H stainless steel pass-through, minimizes dust collection and simplifies cleaning

F.AirShowerPass-Through No. 6705-70 / $10,658—ideal for removing contaminants from carts

DozensofuniquedesignsatTerraUniversal.com

Refrigerated Pass-Through

Pass-Throughwith ventilationmodule

SlidingDoorOption— Counterweighteddooreliminates clearance

Cleanroom pass-tHrougHs anD air sHowers


BiosaFe™ pass-tHrougH CHamBers

now with all-304/316 stainless steel latches to eliminate scratching, corrosion and contamination common with plated hardware.

• Smoothinternalsurfacesandrounded cornerseliminatecracksandcrevicesthat can harbor microbes

• Doors,availablewithandwithoutviewingwindows,areeasytoremoveandcanbesteam-sterilizedtoensureoptimalcleanliness

• Unique,durable,no-maintenancemechanical interlock is isolated outside thepass-throughchamberforoptimalcleanliness

• Electropolishedstainlesschamberwon’tshedparticles,resistsdisinfectantsandother chemicalsBioSealedgesealsagainstnon-contaminating,

non-outgassing,chemicallyresistantpolyurethanesetintodoors.


No.6705-12BRoll-UpDoorPass-Throughinstalledin304SSBioSafe™Cleanroom

Roll-UpDoorModels• Pushbuttonoperation

• Electronicinterlocks

• HEPAairshowersNo.6705-10B No.6705-13A

roll-up Door pass-tHrougHs


• Adjustablenozzlesdirect high velocityHEPA-filteredairstreamthatdislodgesandremovesparticles

• Interlocking doors minimize contamination,release automatically in the event of powerfailure

These Air Showers offer an effective way to remove surface-deposited particles from personnel—before they get to the cleanroom.

Each unit is a fully equipped, protected passageway that allows large numbers of personnel to pass into controlled areas without sacrificing convenience or cleanliness.

Nozzles are arranged on walls in a uniform pattern to ensure effective distribution of filtered air. HEPA-filtered air also flows downward from the ceiling. The closed-loop circulation design directs contaminated air downward through grills and hollow walls of the Air Shower and back to the filter, which removes 99.99% of all particles as small as 0.3 microns.

Othersizesandconfigurationsavailable.RefertoTerraUniversal.comforcomplete

orderinginformation.Garments courtesy of W. L. Gore & Associates

Powder-CoatedSteelAirShowersOverall Dimen.

Inside Dimen.*

Cat. # $/eachW" x D" x H" W" x D" x H"52 x 44 x 116 35.5 x 35 x 90 6010-14 14,472.0052 x 60 x 116 35.5 x 47 x 90 6010-16 17,094.00* Door clearance: 32"W x 81"H

304StainlessSteelAirShowersOverall Dimen.

Inside Dimen.*

Cat. # $/eachW" x D" x H" W" x D" x H"52 x 44 x 116 35.5 x 35 x 90 6010-00 19,034.0052 x 56 x 116 35.5 x 47 x 90 6010-01 20,339.00* Door clearance: 32"W x 81"H

Cleanroom airsHowers


GowningBenchesThese ultra-clean electropolished stainless steel benches won’t shed particles or snag wipers during cleaning. Terra offers several designs, including cylindrical-tube models in sizes from 36" to 84" long. Visit TerraUniversal.com for full details.

Garment&SuppliesCabinetsChoose between powder-coated steel or stainless steel, in several configurations for storage of garments, shelves and other gowning room and cleanroom supplies. Model shown: No. 4101-04B with HEPA filter/blower module. Systemsstartat$1,666.00

Floor-Mounted SolidTop

Rod-top, square frame

Rod-top,cylindricalframe

CleanroomWasteReceptacles CorrespondingRigidLinerType Capacity

(Gallons)Dimensions

W x D x H (in.)Ship.Wt.

(lbs.)Polypropylene Electropolished

304StainlessSteelShip.Wt.

(lbs.)Cat. # $/eachCat. # $/each Cat. # $/each

G 3.5 11 dia. x 17 H 9 — — 1456-15 461.00 3 1456-05 44.00H 7 12 x 12 x 17 19 1456-25 479.00 1456-16 656.00 4 1456-06 50.00I 12 12 x 12 x 23 24 1456-26 610.00 1456-17 838.00 5 1456-07 62.00J 24 15 x 15 x 30 36 1456-27 717.00 1456-18 987.00 7 1456-08 75.00K 40 19 x 19 x 30 48 1456-28 877.00 1456-19 1,426.00 8 1456-09 89.00

G.–K.CleanroomWasteReceptacles

Fabricated of 304 electropolished stainless steel, they provide years of constant service without contami nation. Their no-spring foot pedal allows hands-free operation, and the tight-fitting, gasketed lid forms a nearly air-tight seal to contain waste safely.

H I J K G

All include removable

liner

Polypropylene

A.–F.ElectropolishedStepStoolsandLaddersInclude spring-loaded safety casters that retract under load. Perforations limit particle accumulation. Custom sizes and 316 SS available.

304StainlessSteelStepStoolsandLaddersTop

Platform(W" x D")

OverallDimensions

(W" x D" x H")

No.ofSteps

Electropolished304StainlessSteel

Cat. # $/eachA 30 x 14 30 x 20 x 24 2 2805-50A-2 1,601.00B 30 x 12 30 x 28 x 34 3 2805-51A-2 2,045.00C 30 x 12 30 x 24 x 60 3* 2805-53A-2 2,305.00D 30 x 12 30 x 30 x 70 4* 2805-52A-2 3,462.00E 30 x 16 30 x 40 x 80 5* 2805-54A-2 4,270.00F 30 x 36 30 x 76 x 86 5* 2805-55A-2 4,473.00

* Includes safety handrail. C – D not shown

A

FB

Newsoft-closefeatureminimizes turbulence

whentopcloses.

Cleanroom & gowning room: equipment and supplies


A.Washing/DryingStationIncludes an ULPA-filtered, heated overhead dryer and DI-water sink, both activated by an IR “photoeye” for clean, no-hands operation. Cat. # $/each

One sink model 9600-05 6,105.00 Two sink model 9600-06 12,084.00 Four sink model 9600-07 22,791.00 Six sink model 9600-08 32,804.00

B. PureDry™Cleanroom Hand/GloveDryer

Provides warm, contamination-free air for drying hands and gloves. Dampened for quiet operation. Brushless DC Motor minimizes particle generation, and ULPA filter captures microcontaminants. Cat. # $/each

120VAC/60Hz 3333-33 2,307.00 220VAC/50Hz 3333-33-220 2,307.00

Shownwith99.99%efficientHEPA filter kit

C. MotorizedShoeCleanerInternal vacuum system removes contaminants on shoes. Five internal brushes clean deep into seams, welts. Cat. # $/Each

110VAC, 50/60Hz 1784-00 2,855.00220VAC, 50Hz 1784-00-220 3,122.00Exhaust HEPA Filter Kit 1784-13 446.00 (includes filter)

D. CleanroomMirrorSturdy electropolished stainless steel frame mounts flush with wall to prevent particle accumulation. Size Cat. # $/each

Heavy Duty 36" W x 72" H 5252-52A 1,127.00 24" W x 36" H 5252-53 750.00 18" W x 24" H 5252-54 529.00 Light Duty 18" W x 24" H 5252-60 435.00 24" W x 36" H 5252-61 435.00 18" W x 36" H 5252-62 495.00 24" W x 30" H 5252-63 495.00 Standing, Dual-Sided 36" W x 72" H 5252-65A 1,985.00

E. StickyMats®

Peel-off sheets eliminate the need for messy cleaning and make it easy to maintain a clean surface. All below are medium tack; many other styles available, as well as support frames. Dimen. Blue (full bottom) White (2" bottom) W" x D" Cat. # $/each Cat. # $/each

18 x 36 5601-16 44.00 5602-68 43.00 18 x 45 5601-17 51.00 5602-69 50.00 24 x 36 5601-18 59.00 5602-70 61.00 26 x 45 5601-19 74.00 5602-71 76.00 36 x 36 5601-20 87.00 5602-72 91.00 36 x 45 5601-21 106.00 5602-73 108.00 36 x 60 5601-22 158.00 5602-74 166.00

Shownwithsupportframe

Dual-SidedMirror—No.5252-65A• Twoviewsurfacesminimizecongestion• Helpsreinforcegowningprotocol• Frameless,easy-cleandesign

A

B C D

E

Mostitemsshown here

Cleanroom & gowning room: equipment and supplies


GAvailablein

other sizes and configurations

A. PolymerUtilityCarts withAdjustableShelves

Made of tough, chemical-resistant, high-density polyethylene, which provides excellent chemical resistance and wipes down easily. Raised “ship’s edge” lip (.44"/11 mm) contains spills. Height: 33.25" (other sizes and configurations available). Microban antimicrobial models available.2-Shelf Models Gray Blue W" x L" Cat. # Cat. # $/each

18 x 28 1532-44 1532-12A 139.00 21.5 x 33.75 1532-49 1532-47A 149.00 27 x 39.5 1532-45 1532-13A 166.003-Shelf Models Gray Blue W" x L" Cat. # Cat. # $/each

18 x 28 1532-50 1532-14A 162.00 21.5 x 33.75 1532-55 1532-53A 174.00 27 x 39.5 1532-51 1532-15A 213.00

B. Polymer“DeepLedge”Carts withAdjustableShelves

Similar to models above, but with 2.75" (70 mm)-deep shelf ledges for enhanced spill containment. All models are 41"H. Color: Blue. W" x L" Configuration Cat. # $/each

21.5 x 32.75 2-shelf 1532-56 153.00 21.5 x 32.75 3-shelf 1532-57 189.00 27 x 38.75 2-shelf 1532-58 183.00 27 x 38.75 3-shelf 1532-59 221.00

C.–F.UtilityCartssee below

G.MetroMaxUtilityCartsHigh-strength reinforced polymer allows weight capacity of 600 lbs and removable grids provide easy cleaning. All shelf mats contain Microban antimicrobial polyethylene. W" x L" x H" Configuration Cat# $/each

18 x 30 x 40 2-shelf 1403-03 486.00

Three-ShelfCart(No.1532-53)Microban® Antimicrobial FormulationAvailable!

Series400–Twochromewireshelvesandonestainlesssteelsolidshelf.

Series100–Twostainlesssteelsolidshelves(seechartbelow)

OrderingInformation C.Series100 D.Series200 E.Series400 F.Series600Dimensions(W" x L" x H")

CasterDia.

Cat. # $/each Cat. # $/each Cat. # $/each

StainlessSteelWireShelves

Cat. # $/each18 x 24 x 38 4" 1401-23 426.00 1401-44 542.00 1401-54 289.00 1402-39 399.0018 x 30 x 38 4" 1401-24 482.00 1401-45 599.00 1401-55 327.00 1402-41 455.0018 x 36 x 38 4" 1401-25 482.00 1401-46 599.00 1401-56 311.00 1402-43 433.0021 x 36 x 39 5" 1401-26 496.00 1401-47 655.00 1401-57 340.00 1402-45 509.0024 x 36 x 39 5" 1401-27 551.00 1401-48 696.00 1401-58 376.00 1402-47 512.00

A

E

C

Series600–Twowireshelves,chrome or stainless steel

Three-ShelfDeep-LedgeCart(No.1532-57)Microban®Antimicrobial FormulationAvailable!

Series200–Threestainlesssteelsolidshelves(seechartbelow)

F

B

D

Willnotcorrode!

Carts: for laboratory and Cleanroom


F12-ED

Refrigerated&HeatingBaths/Circulators• “ED” model provides PID temperature control in a economical

systemthat’sidealforgenerallaboratoryapplications• “ME”models includecascadingtemperaturecontrol,earlywarning

low-liquid level sensor, andcapability to recirculate toanexternalvessel(requiresexternaltemperatureprobe)

• “HL” circulator includes Intelligent Cascade Control and externalsensor connection

JULABO Refrigerated and Heating Circulators are suitable for temperature control of external vessels with simultaneous operation in the integral bath tank. The units provide high heating/cooling capacities to ensure rapid heat-up and cool-down times. With “Active Cooling Control” up to +200°C, an FP model offers proportional cooling control to ensure energy-saving performance and reduces heat generation to the environment.

Removable venting grid provides convenient cleaning of dust particles. Typical applications include routine laboratory applications and external temperature control applications to measuring cells, refractometers, polarimeters, photometers, viscometers, fermenters, electrophoresis chambers, chromatography columns, rotary evaporators, and rheometers.

OtherControlled-TemperatureSolutionsfromJulabo—VisitTerraUniversal.com

Cryo-CompactCirculators

Model* TemperatureRange(°C)

Stability Heater,Watts Cooling@(+20°C)

Flow/ Pressure

FillingVolume Bathopening/ bathdepth(inches) Cat. # $/each

F12-ED -20 to 100 ±0.03 2000 200 Watts 15 lpm/5.1psi 4.5 L 5.1 x 5.9 / 5.1 2540-00 3,124.00F25-ME** -28 to 200 ±0.01 2000 350 Watts 15 lpm/5.1psi 4.5 L 9.1 x 16.5 x 24 2540-01 4,502.00F32-ME** -35 to 200 ±0.01 1000 450 Watts 15 lpm/5.1psi 8 L 12.2 x 16.5 x 25.2 2540-02 5,329.00FP50-HL** -50 to 200 ±0.01 2000 900 Watts 15 lpm/5.1psi 8 L 16.5 x 19.3 x 28.4 2540-03 9,050.00

* Units include 2 each barbed fittings for tubing 8 and 10 mm inner diameter.** Models have RS232 interface.

F25-ME FP50-HL

Circulatorsfor MOCVDApplications

Air-andWater-Cooled RecirculatingCoolers

SemiChillRecirculatingCoolers

F32-ME

ControlleD-temperature solutions: by Julabo


Forgloves,hoods,facemasks*

InstallnexttohandwasherAccommodatesmultipleglovesizes or materials

Protects microscopesamples!

Thesehandydispenserssavespaceandorganizegloves,safetyglasses,wipers,hats,andothergarb.They’reperfectbenchtopstoragebinsforsmallpartsusedincleanroomprocessing.Selectclearacrylicorstatic-dissipativePVC,whicheliminates static charges andtheparticlestheyattract.

garB anD parts Dispensers Space-Saving Convenience!

Organizessmallparts

Idealforfinger cots

Easy-accesswiperdispensing*

Hingedtopkeepswipersclean

Item (see photos) Dimensions Acrylic Static-Dissipative PVCW x D x H, in Cat. # $/each Cat. # $/each

A. SneezeGuard™ 7.12 x 7.75 1601-50 14.00 1601-51 26.0011 x 11 1600-25 17.00 1602-75 29.00

B. Wall-MountGloveDispenser(single) 16.5 x 12.5 x 17 4950-72 233.00 4950-74 314.00C. Wall-MountGloveDispenser(triple) 16 x 11.5 x 12 4005-56 259.00 4005-57 391.00D. BenchtopGloveDispenser* 12 x 6 x 6 4951-03 81.00 4951-04 122.00E. FileHolder(4slots) 10.5 x 5 x 15 4005-25 93.00 4005-23 167.00F. DispensingBins 5 x 6.25 x 8.25 4950-12 135.00 4950-13 235.00G. ApparelDispenser 48.5 x 24.5 x 36 4951-06 3,469.00 4951-07 6,245.00H. Multi-ChamberDispenser 15.75 x 8 x 13 4005-51 344.00 4005-50 512.00I. WiperDispenser(enclosed) 12 x 9 x 6 4951-01 88.00 4951-02 156.00J. WiperDispenser(opentop) 10.5 x 14.5 x 4 4950-93 63.00 4950-94 122.00K. SafetyGlassesDispensersHolds: 8 6.75 x 17 4950-45 256.00 4950-46 337.00

(allare5.75"D) 12 9.75 x 17 4951-15 334.00 4951-16 438.0016 6.75 x 28.25 4951-17 461.00 4951-18 607.00

Other sizes available– call Terra!

16 13.13 x 14.375 4951-19 461.00 4951-20 607.0024 9.75 x 28.25 4951-21 599.00 4951-22 788.00

*Now available in stainless steel— see facing page.

24 19.5 x 17 4951-23 599.00 4951-24 788.0032 13.13 x 28.25 4951-25 828.00 4951-26 1,092.0048 19.5 x 28.25 4951-27 1,078.00 4951-28 1,415.00

A

B C

D E

HGF

I J K


ForGilsonPipetmanandDrummondPipette-Aidmodels

O P

Protectsfragilepipettetips

Modelsforlooseorpackagedgloves

Holdsuptofourpetridishes

Clean,drybenchtopstorage

stainless steel laB aiDs

L

M

N

A

B

Benchor wall-mountglove

dispenser

Wiperdispenser

Bootiedispenser

C

D

E

FSwabdispenser

Q

Holdsplatesover6"wide

Item (see photos) — includesanit-microbial coating

DimensionsW x D x H, in.

Electropolished304SSCat. # $/each

A. GloveDispenser, 27 x 7 x 24 (3 compartment) 4951-30-2 1,034.00Wall-mount 34.5 x 8 x 24 (4 compartment) 4951-31-2 1,265.00

B. GloveDispenser, 24 x 8 x 24 (3 compartment) 4951-32-2 977.00Wall-mount 32 x 8 x 24 (4 compartment) 4951-33-2 1,265.00

C. GloveDispenser 12 x 6 x 6 4951-50-2 125.00D. WiperDispenser 12 x 9 x 6 4951-40-2 134.00

9.5 x 9.5 x 6 4951-41-2 134.00E. BootieDispenser 15 x 6 x 6 4951-45-2 150.00F. SwabDispenser 6 x 4 x 6 4951-35-2 62.00G. GloveDispenser 5.5 x 3.75 x 20 (2 boxes) 4951-51-2 61.00H. GloveDispenser 5.5 x 3.75 x 30 (3 boxes) 4951-52-2 74.00I. GloveDispenser 5.5 x 3.75 x 10 (1 boxes) 4951-53-2 54.00J. GloveDispenser 12 x 3.75 x 10 (2 boxes) 4951-54-2 60.00K. GloveDispenser 18 x 3.75 x 10 (3 boxes) 4951-55-2 76.00L. PetriDishIncubationTray 5.37 x 13.75 x .89 4951-85-2 50.00M. PipetteSupportRack 8.88 x 9.2 x 11.75 4951-67-2 67.00N. ElectrophoresisGelPlate

DryingRack6.25 x 7.75 x 7.12 4951-64-2 74.00

O. MicroliterPipettorRacks 9 x 5 x 6.75 4951-81-2 74.00P. MicroliterPipettorRacks 9 x 7.82 x 6.75 4951-83-2 62.00Q SSClipboard 12 x 9.5 1350-00A-2 64.00

G.–K.Glove Dispensers– many sizes available.

4951-51A-2

StainlessSteelCleanroomandLabAidsConvenient racks, dispensers and tools. Dozens of other models at TerraUniversal.com


DigitalVacuumSealersDigital controls ensure repeatable, uniform sealing cycles. The standard cycle is gas-vacuum-seal; optional firmware change allows vacuum-gas-seal cycling. All units feature gas purge and have .25" seal elements. Three-year standard warranty.

UltrasonicCleanersThese Branson C S A - l i s t e d cleaners provide thorough, safe cleaning of small- and medium-sized parts. Models

below feature heat controls with digital timer and degas function, which allows immediate use at maximum efficiency. All operate on 115VAC; 230VAC and other heating and timer configurations are also available.Tank Capacity Cat. # $/each

0.5 gallons 2631-00 389.000.75 gallons 2617-00 487.001.5 gallons 2618-00 754.002.5 gallons 2619-00 1,012.005.5 gallons 2637-00 1,826.00

AVVacuumSealerWithGasPurgeTh e f o o t - p e d a l-activated, retractable nozzle AV series vacuum sealers offer gas-f lush vacuum packaging at its finest. The .25"-wide sealing element delivers a leak-proof seal for electronic devices that require moisture barrier bags. With one touch of the pedal,

the AV flushes out oxygen and moisture with nitrogen, and your sensitive components are sealed in seconds. Also great for dry packaging applications and shipping containers. Compressed air required. 120VAC 220VAC Seal Length Cat. # $/each Cat. # $/each

20" 4052-15* 1,770.00 4052-15-220* 2,081.00 20" 4052-19 2,219.00 4052-19-220 2,528.00 25" 4052-20 2,648.00 4052-20-220 2,959.00 30" 4052-21 2,826.00 4052-21-220 3,136.00 35" 4052-22 3,003.00 4052-22-220 3,314.00

*Thesemodelsdonotincludethegasflushfeature.

SNOGUN™IIHigh-PrecisionCleanerThe safe, inexpensive, highly effective alternative to solvent or dry nitrogen cleaning of sensitive parts! Dry ice particles remove contaminants as small as 0.1 micron without disturbing delicate surface features. Specialized inert gas enclosure available to prevent moisture condensation. Cat. # $/each

4545-00A 2,074.00

120VAC, 50/60Hz 220VAC, 50Hz Seal Length Cat. # $/each Cat. # $/each

15" 4053-01 1,706.00 4053-01-220 2,048.00 20" 4053-02 1,869.00 4053-02-220 2,113.00 25" 4053-03 2,234.00 4053-03-220 2,478.00 30" 4053-04 2,356.00 4053-04-220 2,730.00 35" 4053-05 2,559.00 4053-05-220 2,803.00

IonizingBlow-OffGunSafely removes surface contaminants with a burst of clean, static-neutralized air or nitrogen. Low-voltage design for safe, low-EMI/RFI operation. Includes 0.4-micron capsule filter.Cat. # $/each

110VAC2005-55 660.00

MaxQ2000Analog or digital unit uses triple eccentricdrivetoensuresmooth,uniformagitationOperate in continuous or timed mode for applications including cell cultures, bacterial suspensions, solubility studies, staining, and hybridization. Cat. # $/each

Analog 5322-00 1,442.00

Dual-ActionOrbitalandReciprocatingShakersAnalog operating system is coupled withthree-platformoptionalconfigurationThis affordable analog, dual-action orbital and reciprocating shaker is ideal for a wide range of laboratory applications. Cat. # $/each

5322-68 1,932.00

LowCostOrbitalShakersGentle tovigorousagitationunitavailable intwoflasksizesFeatures built-in timers and can accommodate either thirteen 125 ml Erlenmeyer flasks or nine 250 ml flasks, depending on the model. Gentle to vigorous agitation at 40 to 220 rpm is adjustable. Cat. # $/each

(13 flask model) 5322-62 931.00

VaCuum sealers

sHakers

Cleaning


CO2IncubatorsThese Caron CO2 Incubators feature a horizontal airflow system for uniform air distribution across all shelves. A decontamination cycle eliminates microbial and mycoplasmal contamination. Temperature is controlled from 5 to 60°C ± 0.1°C. Other sizes and configurations available. Cat. # $/each

24 cu. ft. 5757-23 14,808.00 6 cu. ft. 5757-25 5,616.00

Class100CleanroomOvenFour-segment programmable controller provides precise heating to 250°C. Models below include HEPA filters use in Class 100 (ISO 5) cleanrooms. Interior walls are stainless steel, with stainless steel bottom and sidewall plenums. Delrin hinge pivots eliminate metal-on-metal surfaces. Model below is 120VAC; 240 VAC models also available. Includes 2"-dia. exhaust vent, .125" NPT fitting for introducing inert gas or house air, and four adjustable stainless steel shelves. Chamber size: 2.8 cu. ft. Cat. # $/each

3700-70 9,442.00

“Squaroid”VacuumOvensThese ovens provide a max. temperature of 220°C. Radiant warm-wall heating provides more even chamber temperature, and built-in high-limit thermostat guards against overheating. Models below feature LED temperature readouts and operate at 120VAC; 240VAC and dial thermometer models are also available, as well as high-temperature models. Chamber With LED Readout Volume Cat. # $/each

0.7 cu. ft. 3700-80 2,661.00 2.3 cu. ft. 3700-82 4,321.00

Large-Capacity Forced-AirOvensPID temperature controls provide stable heating to 220°C, and a unique turbo blower system creates true one-pass circulation pattern for optimal uniformity and fast recovery time. Includes an electronic digital timer with large LED display and overtemperature protection and isolated heating elements. Chamber interior is stainless steel. Models below are 120VAC. Chamber Size Cat. # $/each

14.0 cu. ft. 3700-85 5,268.00 28.0 cu. ft. 3700-86 5,719.00

EnvironmentalChambersMicroprocessor-controlled chambers from Caron provide precise control over environmental conditions for repeatable results. Refrigerated Incubators provide precise temperature control from 5°C to 60°C. StabilityChambers add a relative humidity system with solid-state humidity sensor and controller that allow humidification and dehumidification for operation from 20 to 98%RH. All incorporate environmentally friendly HFC refrigerant and CFC-free insulation. Light packages and chart recorders are optional.Models below are 115VAC; 230VAC also available. 10 Cubic-Foot Capacity Cat. # $/each

Refrigerated Incubator 5757-03 12,285.00 Stability Chamber 5757-05 15,694.00

Water-andAir-JacketedIncubatorsCO2 water-jacketed and air-jacketed incubators feature five shelves and heated doors to prevent condensation for improved viewing of cultures. The chamber is corrosion-resistant stainless steel and provides 6.2 cubic feet of processing space. Sensor and Type Cat. # $/each

120VAC, 6.3A, 750W Water-Jacketed Thermocouple 5321-95 4,759.00 Water-Jacketed Infrared 5321-97 5,979.00

oVens and enVironmental CHamBers


• Compact,reliable,andeasytouse

• AllmodelsarePeltier-basedwithnocompressorsorCFCstoworryabout

• Anassortmentofsampleblocksavailableand are interchangeable among models

Terra Universal offers a variety of digital chilling/heating dry baths. Two models are fully programmable and will store 5 routines in memory, and two have built-in orbital shakers for mixing while heating or chilling. All models have a plate size of 2.875" (7.3 cm) x 4.375" (11.1 cm) and control temperature as low as -10°C to 100°C.

Dry baths consist of an RS232 I/O port, 30-day countdown timer with alarm and user settable Auto-Off, built-in data logger, electronic calibration, backlit two-line alphanumeric display with 16 characters per line, and UP/DOWN arrow front panel membrane switch for complete control of all functions.

Applications include maintaining 14°C for ligation reactions and 17°C for storing oocytes, conducting enzyme reactions and deactivations, storing enzymes and DNA libraries at your work station, and incubating sample at 37°C.

IC22andIC22XTDryBathModels IC22 and IC22XT digital chilling/heating dry baths are compact, completely solid state, versatile, reliable, and easy to use. These models have two chilling/heating positions that can be set to the same temperature or two different temperatures.

SC25andSC25XTDryBathThe SC25 and SC25XT are a fully programmable chilling/heating dry bath with built-in orbital mixer. These units can store five programs in memory of as many as 10 steps per program where each step can be a temperature, time and mixing speed. Each program can repeat from 1 to 99 times automatically.

• SteamScrubberandFlaskScrubberareavailableinundercounterandfreestanding models

• Bothmodelsofferflexiblecycleoptions• Allracksareinterchangeableamong

washersandmaybepurchasedseparatelyLabconco laboratory glassware washers have specialized features to meet the laboratory’s demand for superior cleaning and convenience.

The SteamScrubber has top and bottom racks that accommodate accessory inserts for a wide variety of glassware shapes and sizes, primarily beakers and other wide-mouth glassware. The FlaskScrubber has a spindle rack that holds up to 36 pieces of narrow-necked glassware such as volumetric flasks.

Both models have a LCD information center for customizing cycles and monitoring operation, including internal water temperature. These washers require non-foaming detergent.

OverallDimensions W" x D" x H"

Type Window & Light Available

Power* SteamScrubber FlaskScrubberCat. # $/each Cat. # $/each

24.1 x 27.4 x 34.1 Undercounter No 115V 6921-08A 6,284.00 6921-02A 8,132.0024.1 x 27.4 x 34.1 Undercounter Yes 115V 6921-45 6,902.00 6921-41 8,740.0024.2 x 27.5 x 34.2 Freestanding No 115V 6921-10A 6,637.00 6921-04A 8,481.0024.2 x 27.5 x 34.2 Freestanding Yes 115V 6921-47 7,254.00 6921-43 9,098.00

* Also available in 208/240V

GotoTerraUniversal.comforadditionalmodelsandcorrelatingsampleblocksfromTorreyPinesScientific

Model Temp Range Cat. # $/each

IC22 -10° to 100°C 5005-04 1,369.00IC22XT -20° to 100°C 5005-05 1,528.00

Model Temp Range Cat. # $/each

SC22 -10° to 100°C 5005-08 1,786.00SC22XT -20° to 100°C 5005-09 1,866.00

TheFlaskScrubberisidealfornarrow-neckandgeneralpurposeglassware.

TheSteamScrubbercomes with two racks forgeneralpurposelaboratorywork.

CHilling/Heating Dry BatHs: by torrey pines

glassware wasHers: by labconco


SartoriusCPSeriesAnalyticalBalancesThepracticalanswerforallapplications—availableinvariousweighingcapacitiesThe Sartorius CP Series of Analytical Balances, which come in a variety of weighing capacities from semi-micro to 320 g, relies on monolithic weigh cell technology to ensure accuracy in continual use year after year.

Startingat$2,205.00

SartoriusExtendAnalyticalBalances(EDSeries)EaseofuseeliminatesoperatorerrorandensuresaccuracyofresultsThe ED Series of Extend Analytical Balances, which come in weighing capacities of 120g and 220g and are operated through a language-driven user interface, ensure high thermal stability and extremely fast response times. Weighing Capacity cat. # $/each 120 g 5701-15 1,815.00 220 g 5701-16 2,100.00

SartoriusToploadingPrecisionBalances(CPSeries)ExceptionallyhighlevelofqualityduetoruggedhousingconstructionThe CP Series offers high quality thanks to its rugged housing construction of high-grade materials. Standard applications include weighing in %, net-total formulation, dynamic weighing or animal weighing, mass unit conversion by toggling, and counting.

Startingat$1,129.00

SartoriusTalentPortableBalances(TESeries)Portable,dependable,accurate—AstarperformerthatcangoanywhereRugged and compact, Talent Portable TE Balances have just the right features for everyday use in the laboratory, including easy-to-read, high contrast displays, fast response times and complete ease of operation.

Startingat552.00

SartoriusMicroBalanceMESeries(ME5)Five-decimal-pointreadoutsinjusteightsecondsScorching speed is what puts the Sartorius ME5 at the top of the class. Operation of the ME draft shield is also designed for fast weighing. Controlled by palm-operable keys or by custom programming. Weighing Capacity cat. # $/each 5.1 g 5701-01 16,131.00

SartoriusTalentAnalyticalBalances(TESeries)JusttheperfectfeaturesforeverydayuseinyourlaboratoryThe TE Series of Analytical Balances from Sartorius comes in two weighing capacities, 60g and 210g, and both the weighing pan and weighing chamber are constructed of high-grade stainless steel. Weighing Capacity cat. # $/each 60 g 5701-18 1,573.00 210 g 5701-17 2,056.00

A.MA35SeriesThese infrared dryers provide a fast alternative to oven drying. Ideal for many production and quality inspection routines. The MA35 allows easy, user-friendly sample heating (40 to 160°C) and analysis. Weighing capacity: 35g (1 mg resolution). cat. # $/each

Glass Panels 5701-55 2,276.00 Metal Panels 5701-56 2,276.00

B. MA100SeriesThis is the only IR dryer that features a built-in weighing system with 0.1-mg resolution and an EC type-approval certificate. Its Swift Parameter Adjustment adapts operation to the results of an available reference method and saves it as a drying routine. cat. # $/each

Halogen Heating Element 5701-59 5,549.00 Ceramic IR Heating Element 5701-60 5,549.00

Includesautomaticandtimermodes. Moisturemeasurementrange:0.05%to100%.Weighingcapacity:100g(0.1mgresolution).

BA

analytical BalanceS: by Sartorius


analytical BalanceS: by Sartorius

Vidaro grid — High performance cleanroom fabric designed for industries where it is essential to protect products from static dissipative charges as well as airborne particles.

maxima eSd — Fluid resistant fabric with built-in static control properties. Widely used in food technology, medical and pharmaceutical industries to help control product and work contamination.

A B

D

F

E

A B

C

VidaroMaximaESD

VidaroGrid

A/B.CleanroomCoverallsandBoots—InVidaroGridandMaximaESDfabrics.

C. Hoods—VidaroGridstyleofferscompleteheadcoverage;MaximaESDoffersheadcoveragewithroundfaceopening

D. LabCoats—Static-controlfabriccomesinseveralcolorsandsizes.

E/F. FrocksandShoeCovers—InwhiteandlightblueCompletepricingandspecificationsatTerraUniversal.com

275ASeriesCeramicTipTweezers• Cleanroom-safe,willnotsloughparticles

• ESD-safewithoutcarbonormetaladditives

• Non-magneticandchemicallyinert

Zirconia Ceramic is six times harder than Stainless Steel, so these tweezers hold their tip geometry better than any steel tweezer. Tips can be microwave sterilized and resists temperatures up to 1500°C. Replaceable tips screw onto a stainless steel body. Length: 4.75". Surface resistivity: 1010Ohms/square (brown tips); 1013 Ohms/square (white tips).

QuantityDiscounts!VisitTerraUniversal.comandcompareprices.

Terraoffersacompletelineoftweezers,forceps,cuttersandotherhandlingtoolsdesignedtomeetthehigheststandardsforprecisionandcleanliness.

179SeriesCopolymerSoftipTweezers• ESDandcleanroomsafe

• Surfaceresistivity106ohms/square

• AcetoneandIPAresistant,Silicon-andChloride-free

These copolymer tweezers resist temperatures to 200°C. They feature screw-on replaceable tips on stainless steel body. Length: 5"

TipSize CopolymerSoftipTweezer ReplacementTipscat. # $/each cat. # $/each

.020" wide 9310-74 152.00 9310-75 76.00

.080" wide 9310-76 152.00 9310-78 76.00.080" wide* 9310-77 173.00 9310-78 76.00

* Reverse action design (pressure opens tweezer)

Tip CeramicTipTweezer ReplacementTipKit*cat. # $/each cat. # $/each

Brown 9310-01 283.00 9310-06 71.00White 9310-04 235.00 9310-07 70.00

* Kit includes 2 tips (.012"W), 4 washers and a screwdriver


reuSaBle garmentS: by Vidaro


cleanroom-SaFe, non-metal tweezerS: by excelta

DisposableGlovesWe offer a wide variety of cleanroom gloves suitable for different applications and cleanliness requirements. The Nitrile cleanroom gloves are available in sterile packaging for use in Class 10 environments and in non-sterile packaging appropriate for Class 10, 100, 1,000, and 10,000. A PVC cleanroom glove is also available which has excellent ESD properties and is a good fit for use in microelectronics manufacturing.

SterileNitrileCleanroomGlove,Class10(200 Pairs)

Size cat. # $/caseSM 5605-30 220.00

MED 5605-31 231.00L 5605-32 220.00

XL 5605-33 232.00XXL 5605-34 232.00

NitrileCleanroomGlove,Class10(1,000 Pieces)

Size cat. # $/caseSM 5605-35 194.00

MED 5605-36 131.00L 5605-37 169.00

XL 5605-38 161.00


Size cat. # $/caseSM 5605-39 132.00

MED 5605-40 131.00L 5605-41 169.00

XL 5605-42 161.00

WipersTerra Universal offers an assortment of cleanroom and laboratory wipers to suit every need.

Cotton Wipers are woven for strength and durability, while also clean and absorbent. Ideal for cleaning magnetic disk media surfaces, high heat applications, and absorbing aqueous and organic solvent spills. Suitable for Class 1000 and higher cleanrooms.

Size Qty./Bag cat# $/each9" x 9" 75 5605-07 55.00

12" x 12" 100 5605-02 55.00

Size Unit of Measure cat# $/each12" x 12" 20 wipe/foil pouch 5605-17 62.00

Size Federal Standard 209E Qty./Bag cat# $/Bag9" x 9" Class 1 150 5605-00 33.00

9" x 9" x 2-ply Class 1 100 5605-03 67.009" x 9" Class 10 150 5605-11 28.00

12" x 12" Class 10 75 5605-08 21.004" x 4" Class 100 600 5605-15 45.009" x 9" Class 100 150 5605-01 25.00

12" x 12" Class 100 100 5605-10 23.00

LaunderedPolyesterWipers are ideal for critical environments where ultra-low particle/fiber generation and absorbent capacity is important. Soft yet durable construction cleans surfaces without scratching. The 2-ply wiper is commonly used in pharmaceutical applications as a primary process wiper.

Pre-saturatedWipers saturated with semiconductor grade (filtered to .2 micron) 70% isopropyl alcohol and 30% de-ionized 18 mega ohm water. Processed and packaged in a controlled environment. Ideal wipe for electronics applications and for general use in pharmaceutical and semiconductor industries. Designed for Class 10,000 applications and above.

VisitTerraUniversal.comforcontaminationandperformancecharacteristics

CleanroomPaperSpecially formulated cleanroom paper minimizes particle generation in controlled environments. Ultra-low particle, extractable and metallic ion content. High tear and tensile strength, burst strength of 50 lbs. per inch. Compatible with virtually any ink or copier system. Processed and double bagged in a Class 100 cleanroom.

Color Weight Size Reams*/Case cat. # $/caseWhite 23# 8.5" x 11" 10 5605-18 117.00Pink 23# 8.5" x 11" 10 5605-19 117.00

Yellow 23# 8.5" x 11" 10 5605-20 117.00Blue 23# 8.5" x 11" 10 5605-21 117.00Blue 30# 11" x 17" 5 5605-22 149.00

* 250 sheets per ream.

GlovesLinersThese lightweight, non-linting liners are knitted with fine-gauge, 100% virgin nylon. They provide dexterity in finger tips, while offering comfort and improved grip in palm. Quality, sturdy construction allows liners to be laundered and reused. Universal size and ambidextrous shape fits comfortably under latex, PVC or nitrile gloves. Suitable for use in controlled environments.

Style Number of gloves per bag cat. # $/BagFull-finger 12 pairs 5605-29 15.00Half-finger 12 pairs 5605-28 15.00


Size cat. # $/caseSM 5605-43 106.00

MED 5605-44 143.00L 5605-45 106.00

XL 5605-46 143.00

Powder-freeNitrileGlove,Class10,000(1,000 Pieces)

Size cat. # $/caseSM 5605-47 107.00

MED 5605-48 107.00L 5605-49 107.00

XL 5605-50 109.00

PVCGlove,Class10,000(1,000 Pieces)

Size cat. # $/caseSM 5605-51 92.00

MED 5605-52 92.00L 5605-53 97.00

XL 5605-54 99.00

cleanroom gloVeS, wiperS and paper: by Valutek


PRSRT STDU.S. POSTAGE PAID

TERRAUNIVERSAL

CHANGE SERVICE REQUESTED

Business WithoutBorders

nLow-CostDomesticandInternationalShipping

Competitive quotes include customs brokerage and duties for door-to-door delivery

nHassle-FreePricing

Web prices honored worldwide

nInternationalSystemofUnits

Web descriptions include SI specifications (metric units of measure)

nComprehensiveProductLinesTerra provides single-source convenience at remarkable savings

nOnlineOrderTrackingWeb-based Real-Time Order Status System lets you monitor progress, from design approval to shop floor to delivery tracking number

nQuick-ShipProgramPopular models of both Terra-built and distributed products are inventoried for quick shipment – look for blue prices at TerraUniversal.com

nGlobalNetworkofSalesRepresentativesComplete listing at TerraUniversal.com

Documents

hoods