Home - Bartington Instruments · 2019. 9. 23. · Created Date: 7/9/2018 4:03:17 PM

bartington.com

DS2201/10bartington.com

The specifications of the products described in this brochure are subject to change without prior notice.

Bartington Instruments Ltd5, 8, 10, 11 & 12 Thorney Leys Business ParkWitney, Oxford OX28 4GE. England

Telephone: +44 (0)1993 706565Email: [email protected]

DAS1Data Acquisition System

DAS1 Data Acquisition System bartington.com

Bartington is a registered trademark of Bartington Holdings Limited, used under licence in the following countries: Australia, Canada, China, European Union, Hong Kong, Israel, Japan, Mexico, New Zealand, Norway, Russian Federation, Singapore, South Korea, Switzerland, Turkey, United Kingdom, United States of America, and Vietnam.

®

DAS1 Data Acquisition System

The DAS1 is a multi-sensor data acquisition system designed to sample and process measurements from a wide range of Bartington® Instruments three-axis magnetometers. It is suitable for any application that requires a large number of sensors to be handled.

The system includes a PXI unit (including A-D cards) and one or more programmable Decaports. Ten magnetometers can be connected to each Decaport and up to eight Decaports can be connected to one PXI chassis. The system is mounted in a portable 19-inch rack-style case.

The DAS1’s PC-based processing allows software designers considerable flexibility. A pre-compiled LabVIEW™ application is supplied, and source code is available to help customers develop their own software.


Features

• Compatible with most Bartington® Instruments sensors.• Can support up to 80 three-axis magnetic field sensors.• Programmable LabVIEW™ software included.

Product IdentificationThe DAS1 system can be specified as follow:

Product name Number of Decaports

1 2 8

DAS1- 10 20 80

Hence DAS1-10 is a DAS1 system with a single Decaport, able to connect up to 10 sensors.


Specifications

The minimum DAS1 system comprises:

• Decaport Analogue Interface Module• PXI Data Acquisition Unit• 19” rack case• Rugged enclosure• Flight case.

Overall weights and dimensions

Decaport Analogue Interface Module, PXI Data Acquisition Unit and 19” rack chassis in rugged enclosure

600 x 515 x 315mm (25kg)

All of the above in wheeled flight case 930 x 575 x 360mm (46kg)

Cables

Each system can be supplied with land or marine compatible cables (up to 1km length, sensor dependent) for connecting the sensors to the Decaport. One metre cables for connecting the Decaport to the PXI Data Acquisition Unit are supplied as standard.

Compatibility

The DAS1 system is also compatible with depth, tilt, and pressure sensors.


Hardware

Monitor

Keyboard

Mouse

PXI CHASSIS

PC Module (Windows XP/7 / LabVIEW)

PXI BUS

Spare2

SpareSpareSpareSpareSpare

A-D Module

DECAPORT

3-axisor depth/tilt

sensor

Scalarsensor

30 Input Channels

DAS1 system schematic diagramshowing typical sensor connections

DAS1 tosensor cables

Up to 10 three-axissensors (e.g. MAG-03) or

30 scalar sensors

(8 slot)1

USBEthernet GPIB IEEE 1284 RS232

1 A-D modules can be added in the spare PXI slots to connect additional Decaports. Up to 7 additional A-D modules and Decaports can be added.

PXI CHASSIS

PXI Remote Control Module

PXI BUS

Spare2

SpareSpareSpareSpareSpare

A-D Module

DECAPORT

3-axisor depth/tilt

sensor

Scalarsensor

30 Input Channels

DAS1 system withPXI remote control module

DAS1 tosensor cables

Up to 10 three-axissensors (e.g. MAG-03) or

30 scalar sensors

(8 slot)1

RemoteControl

Computer (laptop/ PC)MXI Express Connection


Decaport Analogue Interface Module

Each Decaport Analogue Interface Module has 30 input channels, allowing connection of up to 10 three-axis sensors.

The Decaport is primarily intended to support Bartington® Instruments’ magnetic field sensors, but incorporates programmable features to support a wide range of sensor types (e.g. depth, pressure, e-field). It is software-configurable for single-ended or differential analogue sensor inputs, anti-aliasing filters, frequency response and sensor supply voltage.

The Decaport also provides power when used with the Bartington® Instruments range of sensors.


Features

• Single-ended analogue output to PXI Unit• Option to monitor the sensor power supply voltage, current and electrical leakage• Ability to activate the magnetometer test function (when available on magnetometer)• Comprehensive ESD surge protection on the sensor input• Standard 19-inch rack-mounting• Operates with sensor cables up to 1km long (sensor dependent)


Specifications

Performance

Number of input channels 10 three-axis magnetic field sensors

Signal input voltage ±10V differential or single–ended

Common mode input voltage

±8V: balanced / differential output sensors±3V: single ended sensors

Absolute maximum input voltage ±15V on any input pin

Sensor power output ±12V or ±14V limited to 50mA per sensor channelSensor power supply voltage, current and electrical leakage monitoringPower output protected by self-resetting semiconductor fuses

ESD protection Comprehensive ESD surge protection on the sensor input

Filter Type Butterworth 2-pole 12dB per octave low passFrequencies (software selectable): 10kHz ,1kHz, 100Hz, 10Hz

Maximum cable length (recommended) 1km

Power supply voltage 85 to 264 V AC 50/60Hz automatic selection

Power supply current 1100mA (115V) / 640mA (240V) typical

Analogue outputs Balanced ±10V each leg

AFPI Inputs 5V TTL Logic compatible

Environmental

Operating temperature range -20ºC to +70ºC

Relative humidity 0 to 90% non-condensing

Mechanical

Dimensions Standard 19-inch rack-mounting 1U (482 x 44 x 254mm)

Weight 3kg

Input connector (front panel) Hirose RM15TRD-10P (mating Hirose RM15TPD-10S - not supplied)

Output connector (rear panel) 68-way Harting 6001 068 5232

Power input (rear panel) 3-way IEC with integral filter (standard mains cable provided)

Auxiliary connector (rear panel) 15 way D type


PXI Data Acquisition Unit

The PXI Data Acquisition Unit is a rugged, modular, programmable PC-based system that can perform Analogue-to-Digital conversion and most data processing requirements for the analysis of signals from arrays of magnetometers. A chassis-based, plug-in board design allows flexibility in configuration.

The standard chassis includes 8 expansion slots. Each A-D board has 30 input channels supporting up to 10 three-axis sensors connected via a Decaport unit. Hence a fully populated large chassis can process data from 80 three-axis sensors. Data sampling rates will be dependent on the application software, but the PXI Data Acquisition Unit hardware can sample all channels at a rate of up to 15.6kHz with 18 bit resolution.

Specifications

PXI Cardframe NI™ PXIe-1078*

Supply voltage 100 to 240V AC 50/60Hz

Supply current 7 to 3.5A

Operating temperature 0 to 50°C

Storage temperature –40 to 71°C

Relative humidity (operating) 20 to 90%, non-condensing

Dimensions (W x H x D) 355.6 x 177 x 214.2mm*

Weight 7.55kg

*The PXI rack is supplied with National Instruments™ 778643-01/2 19 inch rack mount kits. With this fitted the PXI rack occupies 4U of rack space. A space of 1U above the PXI Rack must be allowed for cooling.

Processor NI™ PXIe-8840

Processor Intel Core i7 5700EQ processor (2.6GHz quad core)

Hard drive 320GB minimum, Serial ATA interface. Extended-temperature 24/7 option provides 80GB minimum SATA solid-state drive.

Chipset Mobile Intel GM45 Express chipset

RAM 1 x SO-DIMM block, 64-bit DDR3L SDRAM socket, 8GB maximum, 4GB as standard.

Ethernet Two 10/100/1000 BaseT ports, RJ45 connector

Serial RS232

Parallel port No

GPIB (IEEE 488 controller) Yes

Hi-speed USB 2 ports 4

Hi-speed USB 3 ports 2

Operating system Windows™ 7 Professional installed, or Windows 10 on request


PXI 6289 DAQ module

Input Analogue

Number of channels 16 differential or 32 single ended

ADC resolution 18-bits expandable to 24-bits by over-sampling

Maximum sampling rate 625kS/s single channel, 500kS/s multi-channel

Minimum sampling rate No minimum

Timing accuracy 50ppm of sample rate

Timing resolution 50ns

Input coupling DC

Input range ±10V, ±5V, ±2V, ±1V, ±0.5V, ±0.2V, ±0.1V

Maximum working voltage for analogueinputs (signal + common mode)

±11V of analogue input GND

Small signal bandwidth (–3dB) 750kHz filter off, 40kHz filter on

Input FIFO size 2,047 samples

Scan list memory 4,095 entries

Overvoltage protection Device ON Device OFF Input current during overvoltage condition

±25V for up to eight analogue input pins±15V for up to eight analogue input pins±20mA max / analogue input pin

The latest specifications for National Instruments™ components (PXIe-1078, PXIe-8840 and PXI-6289) can be found at www.ni.com.

Sample rate versus number of channels

Number of magnetometers Number of data channels Sample rate (Ksamples/sec) Bandwidth (kHz)

1 3 166.67 83.33

2 6 83.33 41.67

3 9 55.56 27.78

4 12 41.67 20.83

5 15 33.33 16.67

6 18 27.78 13.89

7 21 23.81 11.90

8 24 20.83 10.42

9 27 18.52 9.26

10 30 16.67 8.33


Software

The DAS1 is supplied with Windows™ 7 (or Windows™ 10 on request) installed and with a DAS1 Start-Up software application, based on LabVIEW™. This lets users quickly configure the DAS1 to monitor signals from attached sensors and establish that the system is functioning correctly, without providing the functionality of a full magnetic range facility. A fuller set of LabVIEW® modules can be supplied to perform basic data recording and analysis. These modules can form the basis of a user-designed LabVIEW™ application if more complex processing is required.

As the software requirements for each individual range implementation will vary, please contact Bartington® Instruments to discuss the software options that are available.

bartington.com

DS2201/10bartington.com

The specifications of the products described in this brochure are subject to change without prior notice.

Bartington Instruments Ltd5, 8, 10, 11 & 12 Thorney Leys Business ParkWitney, Oxford OX28 4GE. England

Telephone: +44 (0)1993 706565Email: [email protected]

Documents

Home - Bartington Instruments · 2019. 9. 23. · Created Date: 7/9/2018 4:03:17 PM