high tech porcelain · Quartz Surface GraniteMarble Concrete Stain Concrete Laminate ... provide the aesthetics of a beautiful marble or stone, but contain the durability of porcelain

high tech porcelain

www.stonepeakceramics.com ANCED CERTIFIED TRAINING

PL

NEINDEX2015Next Generation of Panels................................. 5

Comparison chart......................................... 10

FACT .................................................... 12

Quality Assurance ....................................... 13

Introduction ............................................ 14

Product description – the innovation...................... 14

Various applications of StonePeak large porcelain panels.. 14

Plane colors...............................................17

Plane applications ....................................... 40

General instructions...................................... 42

Packaging Information .................................... 59

Technical specifications.................................. 62

Limitations and responsibilities.......................... 63

5

StonePeak leads the way forward with a new generation

of panels. Through concentrated research and ongoing

innovative experience, we have patented the first

5 ft. x 10 ft. large porcelain panel of its kind.

A new formulation and composition of raw materials,

allows for a reduced thickness, full-body, light

weight panel with no fiber glass back netting.

State-of-the-art technology provides the durable

technical characteristics of porcelain with the

aesthetic beauty of a natural slab of quarried

stone or stained concrete.

This breakthrough panel gives a fresh look to

continuous surfaces, providing a potential endless

array of uses for residential, commercial, floor,

wall, interior, and exterior applications.

6

WALL

FLOOR

7

8

shown is 5’x10’ Silver Planereplacing old 2”x2” tile for a

fresh new installation appearance

NEW

OLD

10

NEXT GENERATION OF PANELSTECHNICAL FEATURES

SIZES5’x10’

5’x5’

2.5’x5’

2.5’x2.5’

1.25’x2.5’

6mm (approx. ¼”)

6mm (approx. ¼”)

6mm (approx. ¼”) 6mm (approx. ¼”)

6mm (approx. ¼”)

THICKNESS

FLEXIBLE

ABUSE RESISTANT

HEAT PROOF

FROST PROOF

MOLD RESISTANT

ENERGY EFFICIENT

NO VOC

NO ARTIFICIAL BINDERS

CRACK RESISTANT

FLAME RESISTANT

USES

FLOORS

WALLS

INTERIORS

EXTERIORS

COUNTERTOPS

VENEERS

PARTITIONS

PANELS MADE FOR FLOOR APPLICATION

ASTM C627Robinson Floor Test classified as “EXTRA HEAVY”

COMPARISON CHARTCharacteristics: StonePeak

Plane PanelsQuartz Surface

Granite MarbleConcrete

StainConcrete

Laminate

Scratch Resistant *** *** *** ** * **

Stain Resistant *** *** ** * * ***

Crack Resistant *** *** ** * * **

Heat and Burn Resistant *** ** ** ** ** **

Resistant to Many Household Chemicals, Acids and Solvents *** *** ** ** * **

Low Maintenance *** *** ** ** * **

Nonabsorbent and Nonporous *** *** ** ** * **

Mold and Mildew Resistant *** *** ** * ** **

Flexural Strength *** *** * * * *

Color Consistency *** *** * * ** ***

Immunity to Freeze and Thaw *** *** *** * * *

key: *** Excellent | ** Good | * Fair

11

UTILIZATION EXAMPLES:

EXTERIORS INTERIORS COUNTERTOPS

SEAMLESS WALL AND FLOOR PANELS

Shipping

Installation

Cutting and holes

Manipulation

F.A.C.T., Factory Advanced Certified Training

Please contact:[email protected] further information and to participate in a training session.

ANCED CERTIFIED TRAINING

www.stonepeakceramics.com

F.A.C.T., Factory Advanced Certified Training, is implemented in our TN manufacturing facility by experts knowledgeable with Plane. Participants learn how to handle, fabricate, and install our large porcelain panels for interior, exterior, floor, and wall applications. Upon completion and passing of our testing, they are then certified and more importantly obtain knowledge and hands on experience.

Please contact [email protected] for further information and to participate in a training session.

12

ANCED CERTIFIED TRAINING

Congratulations on purchasing exquisite large porcelain panels,

by StonePeak.

These innovative large porcelain panels with state-of-the-art technology provide the aesthetics of a beautiful marble or stone, but contain the durability of porcelain.

For these reasons and your investment, we educate, train, and certify installers and fabricators throughout the nation at our Large Porcelain Panel Training Center in our manufacturing facility to properly handle, fabricate, and install these panels.

A factory certified installer is highly recommended for installation. Please ask your retailer for a list of certified contractors.

Quality Assurance Certificate

www.stonepeakceramics.com

StonePeak Ceramics, Inc. | 314 W. Superior St. |Chicago, IL 60610Phone: 312-506-2800 | Fax: 312-335-0533 | www.stonepeakceramics.com

13

14

INTRODUCTION

The purpose of this manual is to define basic technical requirements, suggestions and guidelines related to the introduction of StonePeak large porcelain panel products, design, usage, installation and maintenance.

PRODUCT DESCRIPTION – THE INNOVATION

StonePeak large porcelain panels consist of a new formulation and composition of raw materials, which allows for a light weight, full-body panel with no fiber glass back netting offered in up to a 5’x10’ size. These state-of-the-art panels are made of 100% natural minerals and don’t use any tints or polymers to create the various colors offered.Like all StonePeak products, they are manufactured utilizing key elements including Quartz, Clays, Kaolin, and Feldspar.

This innovative product gives a fresh look to continuous surfaces, providing a potentially endless array of uses for residential, commercial, floor, wall, interior, and exterior applications.

VARIOUS APPLICATIONS OF STONEPEAK LARGE PORCELAIN PANELS

StonePeak large porcelain panels are ideal for use of interior and exterior applications such as: walls, floors, stairs, partitions, kitchen counter tops, bathroom vanities, exterior facades, and also wherever high quality, sanitary and low maintenance surfaces are required.

StonePeak large porcelain panels offer many advantages:- Flexibility- Abuse resistant - Heat proof- Frost proof- Mold resistant- Energy efficient- No VOCs- No Artificial Binders- Stain Resistant- Continuous surfaces with less grout lines- Washable, non-absorbent solid surface

15

TECHNICAL SPECIFICATIONS

StonePeak large porcelain panels use state-of-the-art technology which provides the durable technical characteristics of porcelain with the aesthetic beauty of a natural panel of quarried stone, stained concrete or weathered metal. Technically superior to a terrazzo, carpet, and VCT floor, this unique product brings porcelain tile to a new level of clients and endless needs.

1. DIMENSIONS

StonePeak large porcelain panels can be manufactured in a wide range of sizes to accommodate any application.

Plane Collection Standard Sizes(± 6mm/10mm; nominal sizes/actual sizes listed are based on caliber 0):

150x300cm = 5’x10’ (60”x120”)

150x300cm = 5’x10’ (60”x120”)

150x150cm = 5’x5’ (60”x60”)

75x150cm = 2.5’x5’ (30”x60”)

75x75cm = 2.5’x2.5’ (30”x30”)

37.5x75cm = 1.25’x2.5’(15”x30”)

Panels are rectified and allow installations with a tighter grout joint. Rectification is achieved by utilizing a new technology that is even more precise than traditional rectified porcelain products.

2. VARIATION & COLOR CONSISTENCY

Slight variation in color may occur from batch to batch of prodcution due to the location from which the natural materials are sourced. To ensure absolute uniformity, please consider ordering extra material for overstock and repairs.

3. ABSORPTION

StonePeak large porcelain panels are non-porous with water absorption of less than 1%. No sealants are recommended for these products as they will not penetrate the surface of the material.

10mm

= 118 3/16” x 59 1/16” (+/- 1 31/32”)

= 59 1/16” x 59 1/16” (+/- 1 31/32”)

= 59 1/16” x 29 1/2” (+/- 1 31/32”)

= 29 1/2” x 29 1/2” (+/- 51/64”)

= 29 1/2” x 14 45/64”(+/- 51/64”)

NOMINAL ACTUAL

16

PL

NECOLORS2015CALACATTA VENA A B...................................... 18

CALACATTA VENA CLASSICO................................. 19

EXTRA VENA A B.......................................... 20

EXTRA VENA.............................................. 21

ARABESCATO VENA A B..................................... 22

PAONAZZETTO VENA........................................ 23

FANTASY BRIGHT.......................................... 24

FANTASY GOLD............................................ 25

FANTASY CLOUD........................................... 26

CRYSTAL VENA............................................ 27

MARFIL VENA............................................. 28

WHITE SAND PLANE........................................ 29

GOLDEN GLAMOUR PLANE.................................... 30

TRAVERTINO VENA......................................... 31

DARK VENA............................................... 32

NAPOLEON VENA........................................... 33

WHITE PLANE............................................. 34

SILVER PLANE............................................ 35

COPPER PLANE............................................ 36

BLACK PLANE............................................. 37

TRUE WHITE.............................................. 38

TRUE BLACK.............................................. 39

18

A B V2

PLANECALACATTA VENA A BDescription: A & B are “book match” faces which can be used side by side for a continuous vein effect.

USH12060088CALACATTA VENA PLANE A 60”x120”- 5’x10’ HONEDUSSP12060088CALACATTA VENA PLANE A 60”x120”- 5’x10’ POLISHEDUSH12060089CALACATTA VENA PLANE B 60”x120”- 5’x10’ HONEDUSSP12060089CALACATTA VENA PLANE B 60”x120”- 5’x10’ POLISHED

1

19

PLANECALACATTA VENA CLASSICO Description: Classico contains four various faces with simultaneous vein effectA,B,C,D face options available by shade for 5’x10’ size only. Please identify choice (if any) when placing order.

V2

A

B

C

DAll sizes are nominalAll Plane products are rectifiedFor technical information refer to our websitewww.stonepeakceramics.com

Mosaics, New Mosaics

USH12MH090MOS.CALACATTA VENA CLASSICO 12”x12”

4

USH12060090 (random)CALACATTA VENA CLASSICO 60”x120”- 5’x10’ HONEDUSSP12060090 (random)CALACATTA VENA CLASSICO 60”x120”- 5’x10’ POLISHED

1

USH6060090CALACATTA VENA CLASSICO 60”x60”- 5’x5’ HONEDUSSP6060090CALACATTA VENA CLASSICO 60”x60”- 5’x5’ POLISHED

1

USH3030090CALACATTA VENA CLASSICO 30”x30”- 2.5’x2.5’ HONEDUSSP3030090CALACATTA VENA CLASSICO 30”x30”- 2.5’x2.5’ POLISHED

3

USH3060090CALACATTA VENA CLASSICO 30”x60”- 2.5’x5’ HONEDUSSP3060090CALACATTA VENA CLASSICO 30”x60”- 2.5’x5’ POLISHED

2

USH3015090CALACATTA VENA CLASSICO 15”x30”- 1.25’x2.5’ HONEDUSSP3015090 CALACATTA VENA CLASSICO 15”x30”- 1.25’x2.5’ POLISHED

6

*USSP12060090CCALACATTA VENA CLASSICO 60”x120”- 5’x10’ POLISHED

110mm

20

A B V2

PLANEEXTRA VENA A BDescription: A & B are “book match” faces which can be used side by side for a continuous vein effect.

USH12060111EXTRA VENA A 60”x120”- 5’x10’ HONEDUSSP12060111EXTRA VENA A 60”x120”- 5’x10’ POLISHEDUSH12060112EXTRA VENA B 60”x120”- 5’x10’ HONEDUSSP12060112EXTRA VENA B 60”x120”- 5’x10’ POLISHED

1

21

PLANEEXTRA VENA

All sizes are nominalAll Plane products are rectifiedFor technical information refer to our websitewww.stonepeakceramics.com

Description: Classico contains four various faces with simultaneous vein effectA,B,C,D face options available by shade for 5’x10’ size only. Please identify choice (if any) when placing order.

V2

A

B

C

D

4


USH12MH110MOS.EXTRA VENA12”X12”

USH12060110 (random)EXTRA VENA 60”x120”- 5’x10’ HONEDUSSP12060110 (random)EXTRA VENA 60”x120”- 5’x10’ POLISHED

1

USH6060110EXTRA VENA 60”x60”- 5’x5’ HONEDUSSP6060110 EXTRA VENA 60”x60”- 5’x5’ POLISHED

1

USH3030110EXTRA VENA 30”x30”- 2.5’x2.5’ HONEDUSSP3030110 EXTRA VENA 30”x30”- 2.5’x2.5’ POLISHED

3

USH3060110EXTRA VENA 30”x60”- 2.5’x5’ HONEDUSSP3060110 EXTRA VENA 30”x60”- 2.5’x5’ POLISHED

2

USH3015110EXTRA VENA 15”x30”- 1.25’x2.5’ HONEDUSSP3015110 EXTRA VENA 15”x30”- 1.25’x2.5’ POLISHED

6

22

A B V2

PLANEARABESCATO VENA A B

USSP12060119ARABESCATO VENA A 60”x120”- 5’x10’ POLISHED USSP12060120ARABESCATO VENA B 60”x120”- 5’x10’ POLISHED

1

23

PLANEPAONAZZETTO VENA


USH6060113PAONAZZETTO VENA 60”x60”- 5’x5’ HONEDUSSP6060113PAONAZZETTO VENA 60”x60”- 5’x5’ POLISHED

1

USH3015113PAONAZZETTO VENA 15”x30”- 1.25’x2.5’ HONEDUSSP3015113PAONAZZETTO VENA 15”x30”- 1.25’x2.5’ POLISHED

6

USH3060113PAONAZZETTO VENA 30”x60”- 2.5’x5’ HONEDUSSP3060113PAONAZZETTO VENA 30”x60”- 2.5’x5’ POLISHED

2

USH3030113PAONAZZETTO VENA 30”x30”- 2.5’x2.5’ HONEDUSSP3030113PAONAZZETTO VENA 30”x30”- 2.5’x2.5’ POLISHED

3

USH12060113PAONAZZETTO VENA 60”x120”- 5’x10’ HONEDUSSP12060113PAONAZZETTO VENA 60”x120”- 5’x10’ POLISHED

1

V2

24

V2

PLANEFANTASY BRIGHT


USSP6060116FANTASY BRIGHT 60”x60”- 5’x5’ POLISHED

1

USSP3015116FANTASY BRIGHT 15”x30”- 1.25’x2.5’ POLISHED

6

USSP3060116FANTASY BRIGHT 30”x60”- 2.5’x5’ POLISHED

2

USSP3030116FANTASY BRIGHT 30”x30”- 2.5’x2.5’ POLISHED

3

USSP12060116FANTASY BRIGHT 60”x120”- 5’x10’ POLISHED

1

25

USSP6060115FANTASY GOLD 60”x60”- 5’x5’ POLISHED

1

USSP3015115FANTASY GOLD 15”x30”- 1.25’x2.5’ POLISHED

6

USSP3060115FANTASY GOLD 30”x60”- 2.5’x5’ POLISHED

2

USSP3030115FANTASY GOLD 30”x30”- 2.5’x2.5’ POLISHED

3

USSP12060115FANTASY GOLD 60”x120”- 5’x10’ POLISHED

1

PLANEFANTASY GOLD


V2

26

USSP6060117FANTASY CLOUD 60”x60”- 5’x5’ POLISHED

1

USSP3015117FANTASY CLOUD 15”x30”- 1.25’x2.5’ POLISHED

6

USSP3060117FANTASY CLOUD 30”x60”- 2.5’x5’ POLISHED

2

USSP3030117FANTASY CLOUD 30”x30”- 2.5’x2.5’ POLISHED

3

USSP12060117FANTASY CLOUD 60”x120”- 5’x10’ POLISHED

1

PLANEFANTASY CLOUD


V2

27

USH6060121CRYSTAL VENA 60”x60”- 5’x5’ HONEDUSSP6060121CRYSTAL VENA 60”x60”- 5’x5’ POLISHED

1

USH3015121CRYSTAL VENA 15”x30”- 1.25’x2.5’ HONEDUSSP3015121CRYSTAL VENA 15”x30”- 1.25’x2.5’ POLISHED

6

USH3060121CRYSTAL VENA 30”x60”- 2.5’x5’ HONEDUSSP3060121CRYSTAL VENA 30”x60”- 2.5’x5’ POLISHED

2

USH3030121CRYSTAL VENA 30”x30”- 2.5’x2.5’ HONEDUSSP3030121CRYSTAL VENA 30”x30”- 2.5’x2.5’ POLISHED

3

USH12060121CRYSTAL VENA 60”x120”- 5’x10’ HONEDUSSP12060121CRYSTAL VENA 60”x120”- 5’x10’ POLISHED

1


PLANECRYSTAL VENA

V2

28

PLANEMARFIL VENA

V2


USH6060114MARFIL VENA 60”x60”- 5’x5’ HONEDUSSP6060114MARFIL VENA 60”x60”- 5’x5’ POLISHED

1

USH3015114MARFIL VENA 15”x30”- 1.25’x2.5’ HONEDUSSP3015114MARFIL VENA 15”x30”- 1.25’x2.5’ POLISHED

6

USH3060114 MARFIL VENA 30”x60”- 2.5’x5’ HONEDUSSP3060114MARFIL VENA 30”x60”- 2.5’x5’ POLISHED

2

USH3030114MARFIL VENA 30”x30”- 2.5’x2.5’ HONEDUSSP3030114MARFIL VENA 30”x30”- 2.5’x2.5’ POLISHED

3

USH12060114MARFIL VENA 60”x120”- 5’x10’ HONEDUSSP12060114MARFIL VENA 60”x120”- 5’x10’ POLISHED

1


USH12MH114MOS.MARFIL VENA12”x12”

4

29

PLANEWHITE SAND PLANE


V2

USH6060123WHITE SAND PLANE 60”x60”- 5’x5’ HONED

1

USH3015123WHITE SAND PLANE 15”x30”- 1.25’x2.5’ HONED

6

USH3060123WHITE SAND PLANE 30”x60”- 2.5’x5’ HONED

2

USH3030123WHITE SAND PLANE 30”x30”- 2.5’x2.5’ HONED

3

USH12060123WHITE SAND PLANE 60”x120”- 5’x10’ HONED

1

30

PLANEGOLDEN GLAMOUR PLANE


V2

USH6060124GOLDEN GLAMOUR PLANE 60”x60”- 5’x5’ HONED

1

USH3015124GOLDEN GLAMOUR PLANE 15”x30”- 1.25’x2.5’ HONED

6

USH3060124GOLDEN GLAMOUR PLANE 30”x60”- 2.5’x5’ HONED

2

USH3030124GOLDEN GLAMOUR PLANE 30”x30”- 2.5’x2.5’ HONED

3

USH12060124GOLDEN GLAMOUR PLANE 60”x120”- 5’x10’ HONED

1

31

PLANETRAVERTINO VENA


V2

USH6060098TRAVERTINO VENA 60”x60”- 5’x5’ HONEDUSSP6060098TRAVERTINO VENA 60”x60”- 5’x5’ POLISHED

1

USH3015098TRAVERTINO VENA 15”x30”- 1.25’x2.5’ HONEDUSSP3015098TRAVERTINO VENA 15”x30”- 1.25’x2.5’ POLISHED

6

USH3060098TRAVERTINO VENA 30”x60”- 2.5’x5’ HONEDUSSP3060098TRAVERTINO VENA 30”x60”- 2.5’x5’ POLISHED

2

USH3030098TRAVERTINO VENA 30”x30”- 2.5’x2.5’ HONEDUSSP3030098TRAVERTINO VENA 30”x30”- 2.5’x2.5’ POLISHED

3

USH12060098TRAVERTINO VENA 60”x120”- 5’x10’ HONEDUSSP12060098TRAVERTINO VENA 60”x120”- 5’x10’ POLISHED

1


USH12MH098MOS.TRAVERTINO VENA12”x12”

4

32

PLANEDARK VENA


V2

USSP6060122DARK VENA 60”x60”- 5’x5’ POLISHED

1

USSP3015122DARK VENA 15”x30”- 1.25’x2.5’ POLISHED

6

USSP3060122DARK VENA 30”x60”- 2.5’x5’ POLISHED

2

USSP3030122DARK VENA 30”x30”- 2.5’x2.5’ POLISHED

3

USSP12060122DARK VENA 60”x120”- 5’x10’ POLISHED

1

33

PLANENAPOLEON VENA

V2


USP6060118NAPOLEON VENA 60”x60”- 5’x5’ POLISHED

1

USP3015118NAPOLEON VENA 15”x30”- 1.25’x2.5’ POLISHED

6

USP3060118NAPOLEON VENA 30”x60”- 2.5’x5’ POLISHED

2

USP3030118NAPOLEON VENA 30”x30”- 2.5’x2.5’ POLISHED

3

USP12060118NAPOLEON VENA 60”x120”- 5’x10’ POLISHED

1

34

PLANEWHITE PLANE


V2

USH6060087WHITE PLANE 60”x60”- 5’x5’ HONEDUSSP6060087WHITE PLANE 60”x60”- 5’x5’ CHROME

1

USH3030087WHITE PLANE 30”x30”- 2.5’x2.5’ HONEDUSSP3030087WHITE PLANE 30”x30”- 2.5’x2.5’ CHROME

3

USH3015087WHITE PLANE 15”x30”- 1.25’x2.5’ HONEDUSSP3015087WHITE PLANE 15”x30”- 1.25’x2.5’ CHROME

6

USH3060087WHITE PLANE 30”x60”- 2.5’x5’ HONEDUSSP3060087WHITE PLANE 30”x60”- 2.5’x5’ CHROME

2

USH12060087WHITE PLANE 60”x120”- 5’x10’ HONEDUSSP12060087WHITE PLANE 60”x120”- 5’x10’ CHROME

1

35

USH3030086SILVER PLANE 30”x30”- 2.5’x2.5’ HONEDUSSP3030086SILVER PLANE 30”x30”- 2.5’x2.5’ CHROME

3

USH3015086SILVER PLANE 15”x30”- 1.25’x2.5’ HONEDUSSP3015086 SILVER PLANE 15”x30”- 1.25’x2.5’ CHROME

6

USH12060086SILVER PLANE 60”x120”- 5’x10’ HONEDUSSP12060086SILVER PLANE 60”x120”- 5’x10’ CHROME

1

USH6060086SILVER PLANE 60”x60”- 5’x5’ HONEDUSSP6060086SILVER PLANE 60”x60”- 5’x5’ CHROME

1

USH3060086SILVER PLANE 30”x60”- 2.5’x5’ HONEDUSSP3060086SILVER PLANE 30”x60”- 2.5’x5’ CHROME

2

PLANESILVER PLANE

V2


36

PLANECOPPER PLANE


V2

USH6060092COPPER PLANE 60”x60”- 5’x5’ HONEDUSSP6060092COPPER PLANE 60”x60”- 5’x5’ CHROME

1

USH3015092COPPER PLANE 15”x30”- 1.25’x2.5 HONEDUSSP3015092COPPER PLANE 15”x30”- 1.25’x2.5’ CHROME

6

USH3060092COPPER PLANE 30”x60”- 2.5’x5’ HONEDUSSP3060092COPPER PLANE 30”x60”- 2.5’x5’ CHROME

2

USH3030092COPPER PLANE 30”x30”- 2.5’x2.5’ HONEDUSSP3030092COPPER PLANE 30”x30”- 2.5’x2.5’ CHROME

3

USH12060092COPPER PLANE 60”x120”- 5’x10’ HONEDUSSP12060092COPPER PLANE 60”x120”- 5’x10’ CHROME

1

37

USH6060091BLACK PLANE 60”x60”- 5’x5’ HONEDUSSP6060091BLACK PLANE 60”x60”- 5’x5’ CHROME

1

USH3015091BLACK PLANE 15”x30”- 1.25’x2.5’ HONEDUSSP3015091BLACK PLANE 15”x30”- 1.25’x2.5’ CHROME

6

USH3060091BLACK PLANE 30”x60”- 2.5’x5’ HONEDUSSP3060091BLACK PLANE 30”x60”- 2.5’x5’ CHROME

2

USH3030091BLACK PLANE 30”x30”- 2.5’x2.5’ HONEDUSSP3030091BLACK PLANE 30”x30”- 2.5’x2.5’ CHROME

3

USH12060091BLACK PLANE 60”x120”- 5’x10’ HONEDUSSP12060091BLACK PLANE 60”x120”- 5’x10’ CHROME

1

PLANEBLACK PLANE

V2


USH6060094TRUE WHITE 60”x60”- 5’x5’ HONEDUSP6060094TRUE WHITE 60”x60”- 5’x5’ POLISHED

1

USH3015094 TRUE WHITE 15”x30”- 1.25’x2.5’ HONEDUSP3015094TRUE WHITE 15”x30”- 1.25’x2.5’ POLISHED

6

USH3060094TRUE WHITE 30”x60”- 2.5’x5’ HONEDUSP3060094TRUE WHITE 30”x60”- 2.5’x5’ POLISHED

2

USH3030094TRUE WHITE 30”x30”- 2.5’x2.5’ HONEDUSP3030094TRUE WHITE 30”x30”- 2.5’x2.5’ POLISHED

3

USH12060094TRUE WHITE 60”x120”- 5’x10’ HONEDUSP12060094TRUE WHITE 60”x120”- 5’x10’ POLISHED

1

PLANETRUE WHITE


V2

38

USH6060093TRUE BLACK 60”x60”- 5’x5’ HONEDUSP6060093TRUE BLACK 60”x60”- 5’x5’ POLISHED

1

USH3015093TRUE BLACK 15”x30”- 1.25’x2.5’ HONEDUSP3015093TRUE BLACK 15”x30”- 1.25’x2.5’ POLISHED

6

USH3060093TRUE BLACK 30”x60”- 2.5’x5’ HONEDUSP3060093TRUE BLACK 30”x60”- 2.5’x5’ POLISHED

2

USH3030093TRUE BLACK 30”x30”- 2.5’x2.5’ HONEDUSP3030093TRUE BLACK 30”x30”- 2.5’x2.5’ POLISHED

3

USH12060093TRUE BLACK 60”x120”- 5’x10’ HONEDUSP12060093TRUE BLACK 60”x120”- 5’x10’ POLISHED

1

PLANETRUE BLACK

V2

All sizes are nominalAll Plane products are rectifiedFor technical information refer to our websitewww.stonepeakceramics.com 39

FLOORS AND WALLS

EXTERIORS

VENEERS / COUNTERTOPS / VANITIES / TABLE TOPS

PLANEAPPLICATIONS

40

Versatile and multi-functional thanks to the

broad range of available sizes and colors, with a

thickness of 6mm, Plane is the perfect solution

for floors and walls.

FLOORS AND WALLS

The high aesthetic and technical qualities of

Plane make the slabs particularly suitable for the

covering of building exteriors. This guarantees

the utmost durability, resistance, and respect

for the environment, even in large sizes.

EXTERIORS

Veneers, countertops, vanities, and table tops

are the best solution to blend the aesthetic

flair of the most refined natural stones and the

technical features of porcelain stoneware, such

as durability, water-proofing and resistance

to chemicals.

VENEERS / COUNTERTOPS / VANITIES / TABLE TOPS

41

GENERALINSTRUCTIONS General instructions................................... 42

1. Shipping

2. Product identification

3. Handling

4. Other tools & materials needed to work with large porcelain panels

5. Manipulation (full cuts, cut outs, & mitered edges)

6. Floor/Wall installation

7. Exterior installation

8. Fabrication of countertops

42

GENERALINSTRUCTIONSCleaning & maintenance................................. 54

Recommended cleaners & contact information.......... 54

Recommended accessories.............................. 55-58

Tools

Blades / Bits

Building products (kerdi board, cement board, etc.)

Adhesives (colored epoxy glue, etc.)

Setting materials (thin set, grout, etc.)

Trowels

Technical Specification Chart........................... 62

44

GENERAL INSTRUCTIONS

1. SHIPPING

Clamp shown on A-frame A-frame shown being unloaded from a container

• Always apply clamps on an A-frame before strapping band is cut from the crate. • On all LTL shipments, strap A-frames securely inside of cab. • We do not recommend using the same A-frame to ship with as that received from the factory. Contact your representative for more information.

A-frame properly strapped to open truck

5’x10’ panels may be transported vertically (see example A) or horizontally (see example B).

Example A

Example B

• A-frame packaging can hold up to 50 pieces of 5’x10’ porcelain panels vertically.Full 20 ft. containers hold 150 pieces (3 total A-frames).

• Flat crates can hold up to 12 panels. No more than 6 flat crates may be stacked on top of each other in a 20 ft. container.

• Other size packaging:

15”x30”, 30”x30”, and 30”x60” are regularly packaged in a box and shipped in wood crates.

60”x60” are shipped flat in reinforced crates, holding 24 pieces per crate, or on a Vertical A-frame holding up to 48 pieces.

Vertical transportation is preferred by using “A-frame” packaging.For Local Shipping, always use an A-frame (see example A).

D A N G E R

FOR ALL 120”x60” & 60”x60” PANELS:

45

2. PRODUCT IDENTIFICATION

Each full crate will include a product sticker with the product description, shade, size, and code, along with a packing slip for details of shipment and material. All smaller shipments will only include the packing slip. If a special shade is needed, please indicate it on the purchase order; When ordering the same material multiple times, the same (original) shade cannot be guaranteed.

3. HANDLING

When taking delivery of large porcelain panels (120”x60” & 60”x60”), please make sure of the following:

• It is important to examine any shipment to notate any damage on BOL or a claim may be refused.

• If you detect any defect after taking delivery of the panels, and prior to cutting, do not proceed with the processing and contact your sales or customer service representative immediately.

• Transport of 12 panels or less should be shipped in open A-frame with flat back support.

• When moving the panels vertically, be sure to use proper base support to stand the panels. Two support pieces about 2” thick and 24” apart from each end of panel is recommended.

Recommended tools include:

B.Suction Cups D.Forklift Pinch Clamp by Abaco Machines or similar

C.Moving Tools (see page 55)

Example of suction cup handle being used. Panel weight is approx. 140 lbs. and no more than 2 people are suggested to move.

Example of forklift boom & pinch clamp

When moving the panels or crates, please use proper tools.

A.Forklift Extension

Example of forklift extensions

46

4. OTHER TOOLS & MATERIALS NEEDED TO WORK WITH LARGE PORCELAIN PANELS

• Rigid working table to match the dimension of the panels (120”x60” OR LARGER)

• Scoring tools

• Variable speed grinders with diamond blades (See page 49 for photo.)

• List of tools & materials neeeded for porcelain panel installation jobs

Tape measureFraming square Marking pencil / china markerChalk lineGrid (graph) paperCarpenter’s triangleSafety glassesRubber glovesKnee padsBucketsDrill and mixing paddleSpray bottleTile trowel2 x 4Rubber malletSpongesAbrasive stone Manual tile cutterTile nipperGrout floatCheesecloth

Tile spacersWaterThin-set mortarGroutPainter’s tapeGrout haze / film removerGrout sealerStainBlocker for groutPaper towels

47

5. MANIPULATION (FULL CUTS, CUT OUTS, MITERED EDGES)

The “score and snap” is the preferred method for straight cuts (from oneend of the panel to the other) using a recommended tool.(See page 55 – for tool suppliers.)

When planning a cut that will be the full length of the panel, either with a plunge cut, or starting at the edge, mark and drill a relief hole at the termination point of the cut, then cut towards the relief hole. Properly support piece equally across entire surface of the piece when setting in mortar and prior to installation.

When planning a plunge cut, drill a relief hole with a porcelain core bit at the termination point of the cut, prior to beginning the cut. Always cut towards the relief hole. When planning a “U” shaped cut, mark, and drill relief holes where the cut lines will intersect.

Always make the shortest cuts first.

When planning an “L” shaped cut, mark and drill relief holes where the cut lines will intersect, always cut the shortest length first, and cut towards the relief hole.

When manipulating large porcelain panels, a variable speed right angle grinder is strongly suggested to reduce vibration. Diamond blades or diamond drill bits should be used for various cuts and manipulations. (See page 55 – for tool suppliers.)

48

IMPORTANT: Always cut towards the relief hole.

When cutting a “U” shaped piece, mark, and drill relief holes where the cut lines intersect, always make the shortest cut first.

When cutting an “L” , drill relief holes where the cut lines intersect, always make the shortest cut first.

Colored or tinted epoxy glue or equivalent are often used to fill edges and bring the pieces together to form a smooth transition.

ALWAYS PROPERLY SUPPORT EACH PIECE PRIOR TO INSTALLATION.

49

For circular cut outs, a circular diamond drill bit must be used with a variable speed grinder.

For straight line cut outs, a variable speed grinder with electro plated diamond blades must be used. Relief holes or cuts before planning a square or rectangular shape are necessary.

When possible, it is best to fabricate niches and holes after the panel is already installed with thin set on wall or floor. If it is not possible to cut holes or square/rectangular cuts (fireplace, sink, etc.)before the panel is installed, create full support with plywood or MDF panel template with same shapes and cuts to attach and transport the porcelain panel. Support panels should only be detached when porcelain panels are fully bonded to the wall or floor. It is also possible to move panels with proper moving tools made of multiple suction cups to avoid tension of the panel after it is cut.

Example of initial drawing for plumbing fixtures cut out

Image shows contact of variable speed grinder with diamond circular bit

Example of variable speed grinder using diamond blade to make straight line cut out

Clean cut out complete

IT IS IMPORTANT TO AVOID STRESS AND TORSION TO THE ALREADY CUT PANEL.

50

Material can be mitered using proper tools. Colored or tinted adhesives such as epoxy or equivalent are often used to fill edges and bring the 45 degree miter cuts together. Please see image below of 45 degree miter cut.

Material can be bullnosed the same as regular porcelain.

Large porcelain panels can be installed over concrete slabs or other suitable substrates. You must honor all expansion joints or any defects in the substrate and mitigate prior to installation. Substrate should be a minimum of ¼” over 10 feet in flatness. The back of the panel and substrate from flatness should be spread with thin set mortar to achieve 100% coverage. (See preferred trowels page 58).

Self-leveling systems are required to acheive desired flatness between joints. Fill any voids with the mortar for complete support.

Recommended tools and techniques need to be used to ensure full bond of the panel.Recommended techniques should be followed to move air out from underneath the panels. Example of full skim coat being applied

6. FLOOR/WALL INSTALLATION

51

6. FLOOR/WALL INSTALLATION CONTINUED

The setting material manufacturers have vast experience in the installation of a tiling system using porcelain tiles and large porcelain panels. Accordingly, we strongly recommend that the installer should contact the relevant setting material manufacturers and seek their advice prior to installation of our large porcelain panels. (See referenced manufacturers page 57 for contact details).

It is very important to spread thin set the same direction on both the substrate and the panel, the shortest direction of panels. Thin set brandswe reccomemnd are: LFT by Mapei, Prolite by Custom, 254 Platinum by Laticrete, and x77 Walls & x78 Floors by Ardex (See referenced manufacturers page 57 for contact details).

Place tile into the fresh mortar and firmly press to cause the ridges to flatten out and come together into a continuous void-free bed. Install desired spacers/levelers of preferred grout joint design width.

NOTE: Recommended 1/8” grout joint width should be maintained throughout the entire installation.

Self-leveling system being used for floor installation

Example of proper full mortar coverage

Unsanded grout with added polymer or epoxy grout is suggested to grout the joints. If using epoxy grout, make sure to follow proper cleaning instruction within the manufacturers’ specific time frame.

StonePeak does not accept any responsibility nor does it recommend a particular method of installation. It is the responsibility of the installer/buyer to design the tiling system based on the advice obtained from the setting material manufacturer.

52

7. EXTERIOR INSTALLATION

Large porcelain panels are ideal for exterior cladding of walls and vertical applications. Contact manufacturer for further information or to become a certified installer.

Example of exterior cladding

WE OFFER MECHANICAL AND BONDED TECHNIQUES.

53

8. FABRICATION OF COUNTERTOPS

Large porcelain panels are ideal for countertop installation with the proper substrate. Contact manufacturer to become a certified fabricator.

Example of countertop and backsplash

54

RECOMMENDED CLEANERS & CONTACT INFORMATION

FILA CLEANING SOLUTIONS

10800 N.W. 21st Street #170Miami, FL 33172Phone 305.724.8939Website www.filasolutions.comFor organic residue removalFILA PS87For cement-based residue removalFILA DETERDEKFor epoxy removalFILA CR10

HILLYARD, INC.

302 North 4th StreetSt. Joseph, MO 64501TF 800.365.1555Fax 800.861.0256Website www.hillyard.comFor lead or metal residue removalFor contractor pencil marksFor wax residue

HOUSEHOLD CLEANERS

Magic EraserCrème CleanBrasso GelLysol GelAll purpose ceramic cleanerWindexBaking SodaAmmonia

RECOMMENDED CLEANERS FOR PROFESSIONAL USE

RECOMMENDED CLEANERS FOR DAILY USE

Construction particles, dust, sand, and debris should be removed from the floors by sweeping with a soft brush. Sand can scratch the floor and those surfaces should always be kept free from dust,sand and soil. StonePeak large porcelain panel surfaces should be properly covered and protected after the installation, and up to the completion of all construction.

A PROPER INITIAL CLEANING AFTER INSTALLLATION IS COMPLETED IS SUGGESTED.PROFESSIONAL CLEANERS SHOULD BE USED TO MAKE SURE ALL CONSTRUCTION RESIDUES ARE COMPLETELY REMOVED. (See below for recommended professional cleaners.)

Large porcelain panels are a high quality, solid, non porous product that require minimum maintenance. (For daily maintenance, see below for recommended household cleaners.)

CLEANING & MAINTENANCE

FIRST CLEANING AFTER INSTALLATION

ORDINARY MAINTENANCE

CLEANING DURING INSTALLATION

55

RECOMMENDED INSTALLATION ACCESSORIES INFORMATION

TOOLS

RAIMONDI TOOLS

Donnelly Distribution LLC N 56 W 24790 N Corporate Circle Unit A

Sussex, WI 53089 TF 800.625.6686

Phone 262.820.1212 Fax 262.820.1226

Website www.donnellydist.com

SIGMA / ETM TOOLS

European Tile Masters, Inc.1830 Vista Way

Margate, FL 33063Phone 954.917.3599Fax 954.917.3539

Website www.europeantilemasters.com Website www.toolsfortile.com

ABACO MACHINES USA (BOOM, PINCH CLAMP)

14508 S Garfield AveParamount, CA 90723Phone 310.532.0366Fax 310.532.0499

Website www.abacomachines.com

RUSSO TRADING COMPANY INC

4235 N 127th St.Brookfield, WI 53005Phone 855.782.8665Fax 262.790.2177

Website www.RTCproducts.com

OMEGA DIAMOND INC

10125 Ophir RoadNewcastle, CA 95658Phone 888.996.4777Fax 530.885.3785

Website www.omegadiamond.com

56

BLADES/BITS

CYCLONE

Diamax Industries949 W Marietta St X100Atlanta, GA 30318Phone 404.817.3232Website www.diamaxinc.com

WEHA

Weha USA625 Griffith Rd Suite 120Charlotte, NC 28217Phone 704.940.0115Website www.wehausa.com

BUILDING PRODUCTS (KERDI BOARD, CEMENT BOARD, ETC.)

SCHLUTER SYSTEMS (KERDI BOARD)

Schluter-Systems L.P.194 Pleasant Ridge RoadPlattsburgh, NY 12901-5841TF 800.472.4588Fax 800.477.9783Website www.schluter.com

WEDI BOARD

Wedi Corportation171 S Gary AveCarol Stream, IL 60188Phone 877.933.wedi (9334)Fax 847.357.9819Website www.wedicorp.com

HARDIEBACKER BOARD

(MEDIUM DENSITY FIBER)Available at most local hardware stores

USG (CEMENT BOARD)

USG US Corporate Office550 West Adams StreetChicago, IL 60661Phone 312.436.4000Website www.usg.com

ADHESIVES (COLORED EPOXY GLUE, ETC.)

TENAX

Tenax USA625 Griffith Rd Suite 120Charlotte, NC 28217Phone 704.583.1173Website www.tenax4you.com

AKEMI

INNOCHEMInnovative Chemicals4030 Pleasantdale Road Suite F Doraville, GA 30340Phone 770.409.8789Fax 770.409.9096Website www.akemina.com

57

SETTING MATERIALS (THIN SET, GROUT, ETC.)

MAPEI

MAPEI Americas Headquarters1144 E. Newport Center Drive

Deerfield Beach, FL 33442TF 800.992.6273Fax 954.246.8805

Website www.mapei.us

LATICRETE

LATICRETE International, Inc.One LATICRETE Park North

Bethany, CT 06524-3423 USATF 800.243.4788

Website www.laticrete.com

CUSTOM BUILDING PRODUCTS

13001 Seal Beach Blvd Seal Beach, CA 90740

TF 800.272.8786Phone 562.598.8808Fax 800.200.7765

Website www.custombuildingproducts.com

BOSTIK

11320 W Watertown Plank RoadWauwatosa, WI 53226

TF 800.762.7845Website www.bostik-us.com

RECOMMENDED INSTALLATION ACCESSORIES INFORMATION CONTINUED

ARDEX

ARDEX Americas400 Ardex Park DriveAliquippa, PA 15001Phone 888.512.7339

Website www.ardexamericas.com

58

TROWELS

FLOW RIDGE TROWEL BY RAIMONDI

Donnelly Distribution LLCN63 W 22611 Main Street Unit CSussex. WI 53089TF 800.625.6686Phone 262.820.1212Fax 262.820.1226Website www.raimondiusa.com

EURO NOTCH TROWEL BY ETM

European Tile Masters, Inc.1830 Vista WayMargate, FL 33063Phone 954.917.3599Fax 954.917.3539Website www.europeantilemasters.com Website www.toolsfortile.com

PREMIUM NOTCH TROWEL BY SUPERIOR BILT

13001 Seal Beach BlvdSeal Beach, CA 90740TF 800.272.8786Phone 562.598.8808Fax 800.200.7765Website www.custombuildingproducts.com

59

SIZE CODE

USH12060091 USH12060088USH12060089USH12060090USH12060092USH12060121USH12060110USH12060111USH12060112USH12060124USH12060114USH12060123USH12060113USH12060086USH12060098 USH12060093USH12060094USH12060087

USSP12060119USSP12060120USSP12060088USSP12060089USSP12060090USSP12060121USSP12060122USSP12060110USSP12060111USSP12060112USSP12060116USSP12060117USSP12060115USSP12060114 USP12060118USSP12060113USSP12060098USP12060093USP12060094

USSP12060090C

USSP12060091USSP12060092USSP12060086USSP12060087

USH6060091USH6060090USH6060092USH6060121USH6060110USH6060124USH6060114USH6060123USH6060113USH6060086USH6060098USH6060093USH6060094USH6060087

USSP6060090USSP6060122USSP6060110USSP6060116USSP6060117USSP6060115USSP6060121USSP6060114

NAME

Black PlaneCalacatta Vena Plane ACalacatta Vena Plane BCalacatta Vena ClassicoCopper PlaneCrystal VenaExtra VenaExtra Vena AExtra Vena BGolden Glamour PlaneMarfil VenaWhite SandPaonazzetto VenaSilver PlaneTravertino VenaTrue BlackTrue WhiteWhite Plane

Arabescato Vena AArabescato Vena BCalacatta Vena ACalacatta Vena BCalacatta Vena ClassicoCrystal VenaDark VenaExtra VenaExtra Vena AExtra Vena BFantasy BrightFantasy CloudFantasy GoldMarfil VenaNapoleon VenaPaonazzetto VenaTravertino VenaTrue BlackTrue White

Calacatta Vena Classico polosched 10mm

Black PlaneCopper PlaneSilver PlaneWhite Plane

Black PlaneCalacatta Vena ClassicoCopper PlaneCrystal VenaExtra VenaGolden Glamour PlaneMarfil VenaWhite SandPaonazzetto VenaSilver PlaneTravertino VenaTrue BlackTrue WhiteWhite Plane

Calacatta Vena ClassicoDark VenaExtra VenaFantasy BrightFantasy CloudFantasy GoldCrystal VenaMarfil Vena

60”x120”

honed

60”x120”

polished

60”x120” 10 mm

polished

60”x120”

chrome

60”x60”

honed

60”x60”

polished

Piece

111111111111111111 11111 11111111111111

1

1111

1111111 1111111

11111111

Piecesq.ft

49.4849.4849.4849.4849.4849.4849.4849.4849.4849.4849.4849.4849.4849.48 49.4849.4849.4849.48

49.4849.4849.4849.4849.4849.4849.48 49.4849.4849.4849.4849.48 49.4849.4849.4849.4849.4849.4849.48

49.48

24.7424.7424.7424.74

24.7424.7424.7424.7424.7424.7424.7424.7424.7424.7424.7424.7424.7424.74

24.7424.7424.7424.7424.74 24.7424.7424.74

CRATEPcs

121212121212121212121212121212121212

12121212121212121212121212121212121212

12

12121212

2424242424242424242424242424

2424242424242424

CRATEsq.ft

593.77593.77593.77593.77593.77593.77593.77593.77593.77593.77593.77593.77593.77593.77593.77593.77593.77593.77

593.77593.77593.77593.77593.77593.77593.77593.77593.77593.77593.77593.77593.77593.77593.77593.77593.77593.77593.77

593.77

593.77593.77593.77593.77

593.78593.78593.78593.78593.78593.78593.78593.78593.78593.78593.78593.78593.78593.78

593.78593.78593.78593.78593.78593.78593.78593.78

THICKNESSmm.

6.06.06.06.06.06.06.06.06.06.06.06.06.06.06.06.06.06.0

6.06.06.06.06.06.06.06.06.06.06.06.06.06.06.06.06.06.06.0

10

6.06.06.06.0

6.06.06.06.06.06.06.06.06.06.06.06.06.06.0

6.06.06.06.06.06.06.06.0

WEIGHTLb sq.ft

2.882.882.882.882.882.882.882.882.882.882.882.882.882.882.88 2.882.882.88

2.882.882.88 2.882.882.882.882.882.882.882.882.882.882.88 2.882.882.88 2.882.88

4.803

2.882.882.882.88

2.882.882.882.88 2.882.882.88 2.882.882.882.882.882.882.88

2.882.882.882.88 2.882.882.88 2.88

PAONAZZETTOVENA

FANTASYBRIGHT

CALACATTAVENA CLASSICO

FANTASYCLOUD

CALACATTAVENA A B

ARABESCATOVENA A B

EXTRAVENA

EXTRAVENA A B

MARFILVENA

CRYSTALVENA

FANTASYGOLD

WHITEPLANE

TRAVERTINOVENA

GOLDENGLAMOUR PLANE

WHITE SANDPLANE

COPPERPLANE

BLACKPLANE

SILVERPLANE

TRUEBLACK

TRUEWHITE

NAPOLEONVENA

DARKVENA

Packaging Information PLANE

60

60”x60”

polished

60”x60”

chrome

30”x60”

honed

30”x60”

polished

30”x60”

chrome

30”x30”

honed

30”x30”

polished

30”x30”

chrome

SIZE CODE

USP6060118USSP6060113USSP6060098USP6060093USP6060094



USSP3060090USSP3060122USSP3060110USSP3060116 USSP3060117USSP3060115USSP3060121USSP3060114USP3060118USSP3060113USSP3060098USP3060093USP3060094



USSP3030090USSP3030121USSP3030122USSP3030110USSP3030116 USSP3030117USSP3030115USSP3030114USP3030118USSP3030113USSP3030098USP3030093USP3030094


NAME

Napoleon VenaPaonazzetto VenaTravertino VenaTrue BlackTrue White



Calacatta Vena ClassicoDark VenaExtra VenaFantasy BrightFantasy CloudFantasy GoldCrystal VenaMarfil VenaNapoleon VenaPaonazzetto VenaTravertino VenaTrue BlackTrue White



Calacatta Vena ClassicoCrystal VenaDark VenaExtra VenaFantasy BrightFantasy CloudFantasy GoldMarfil VenaNapoleon VenaPaonazzetto VenaTravertino VenaTrue BlackTrue White


BOXPieces

11111

1111

22222222222222

22 22222 222222

2222

3333 3333333333

3 3333 33333 333

3333

BOXsq.ft

24.7424.7424.7424.7424.74

24.7424.7424.7424.74

24.7424.7424.7424.7424.7424.7424.7424.7424.7424.7424.7424.7424.7424.74

24.7424.7424.7424.7424.7424.7424.74 24.7424.7424.7424.7424.7424.74

24.7424.7424.7424.74

18.56 18.5618.5618.5618.5618.5618.5618.5618.5618.5618.5618.5618.5618.56

18.5618.5618.5618.5618.56 18.5618.5618.5618.5618.56 18.5618.5618.56

18.5618.5618.5618.56

CRATEPcs

2424242424

24242424

2424242424242424242424242424 252525252525252525252525

25252525

2525252525252525252525252525

36363636363636363636363636

36363636

CRATEsq.ft

593.78593.78593.78593.78593.78

593.78593.78593.78593.78

618.53618.53618.53618.53618.53618.53 618.53618.53618.53618.53618.53618.53618.53618.53

618.53618.53618.53618.53618.53618.53618.53618.53618.53618.53618.53618.53

618.53618.53618.53618.53

668.02668.02668.02668.02668.02668.02668.02668.02668.02668.02668.02668.02668.02668.02

668.02668.02668.02668.02668.02668.02668.02668.02668.02668.02668.02668.02668.02

668.02668.02668.02668.02

THICKNESSmm.

6.06.06.06.06.0

6.06.06.06.0

6.06.06.06.06.06.06.06.06.06.06.06.06.06.0

6.06.06.06.06.06.06.06.06.06.06.06.0

6.06.06.06.0

6.06.06.06.06.06.06.06.06.06.06.06.06.06.0

6.06.06.06.06.0 6.06.06.06.06.06.06.06.0

6.06.06.06.0

WEIGHTLb sq.ft

2.882.882.882.882.88

2.882.882.882.88

2.88 2.882.882.88 2.88 2.882.882.88 2.88 2.882.882.88 2.88 2.88

2.882.88 2.882.882.88 2.88 2.882.882.88 2.88 2.88 2.88

2.88 2.88 2.882.88

2.88 2.88 2.882.88 2.88 2.882.88 2.882.882.88 2.88 2.88 2.882.88

2.882.882.88 2.88 2.88 2.882.882.882.88 2.88 2.88 2.882.88

2.88 2.88 2.882.88

61

SIZE CODE NAME Piece Piecesq.ft

CRATEPcs

CRATEsq.ft

THICKNESSmm.

WEIGHTLb sq.ft


USSP3015090USSP3015121USSP3015122USSP3015110USSP3015116 USSP3015117USSP3015115USSP3015114USP3015118USSP3015113USSP3015098USP3015093USP3015094


USH12MH090USH12MH110USH12MH114USH12MH098


Calacatta Vena ClassicoCrystal VenaDark VenaExtra VenaFantasy BrightFantasy CloudFantasy GoldMarfil VenaNapoleon VenaPaonazzetto VenaTravertino VenaTrue BlackTrue White


Calacatta Vena ClassicoExtra VenaMarfil VenaTravertino Vena

15”x30”honed

15”x30”

polished

15”x30”

chrome

12”x12”mosaico

66666666666666 6666666 666666

6666

4444

18.5618.5618.5618.5618.5618.5618.5618.5618.5618.5618.5618.5618.5618.56

18.5618.5618.5618.5618.5618.5618.5618.5618.5618.5618.5618.5618.56

18.5618.5618.5618.56

- - - -

3636363636363636363636363636

36363636363636363636363636

36363636

- - - -

668.02668.02668.02668.02668.02668.02668.02668.02668.02668.02668.02668.02668.02668.02

668.02668.02668.02668.02668.02668.02668.02668.02668.02668.02668.02668.02668.02

668.02668.02668.02668.02

- - - -

6.06.06.06.06.06.06.06.06.06.06.06.06.06.0

6.06.06.06.06.06.06.06.06.06.06.06.06.0

6.06.06.06.0

6.06.06.06.0

2.88 2.88 2.882.882.88 2.88 2.882.88 2.88 2.88 2.882.88 2.88 2.88 2.88

2.882.882.88 2.88 2.882.88 2.88 2.88 2.882.88 2.88 2.88 2.882.88

2.88 2.88 2.882.88

Lb/piece- - - -

Packaging Information PLANE

PAONAZZETTOVENA

FANTASYBRIGHT

CALACATTAVENA CLASSICO

FANTASYCLOUD

CALACATTAVENA A B

ARABESCATOVENA A B

EXTRAVENA

EXTRAVENA A B

MARFILVENA

CRYSTALVENA

FANTASYGOLD

WHITEPLANE

TRAVERTINOVENA

GOLDENGLAMOUR PLANE

WHITE SANDPLANE

COPPERPLANE

BLACKPLANE

SILVERPLANE

TRUEBLACK

TRUEWHITE

NAPOLEONVENA

DARKVENA

All sizes are nominalAll Plane products are rectified

62

P H Y S I C A LP R O P E R T I E S

A S T MT E S T

I N D U S T R Y S T A N D A R D SSTONEPEAKRESULTS

WATER ABSORPTION C373 0.5% Maximun ≤0.1%

SIZE C499 Range of Thickness (inch) 0.040 ≤0.040

C499 Average Facial Dimension ±0.25% ≤±0.25%

C485 Average ±0.40% on any edge ≤±0.40%

C485 Average ±0.40% diagonal ≤±0.40%

C502 Wedging ±0.25% ≤±0.25%

DEEP ABRASION C1243 ≤175 mm3 ≤130 mm3

HARDNESS (MOHS SCALE) No requirement ≥7

FREEZE THAW CYCLING C1026 No sample must show alterations to surface

No crackingor spalling

occurred

CHEMICAL RESISTANCE C650 No requirement Class A

STAIN RESISTANCE C1374 No requirement Class A HONED

BREAKING STRENGTH C648 250 lbf or greater ≥250 lbf

SCOF AVERAGE(STATIC COEFFICIENT OF FRICTION)

C1028 ≥0.60 Dry ≥ 0.80Wet ≥ 0.65

DCOF ACUTESTSM AVERAGE(DYNAMIC COEFFICIENT OF FRICTION)

BOTT3000 ≥0.42 ** ≥0.6

ROBINSON TEST AC627 classified as “Extra Heavy”

* Data taken from a representative color. Individual product testing can be conducted by request.* * SCOF/DCOF: all values given are for matte or honed material. No values are given for “polished” materialsStonePeak does not recommend polished surfaces in areas subject to exposure from grease, oil, or water.

TECHNICAL SPECIFICATIONS

63

We have taken every care to provide complete information in this document; this information should be used as a guide in the design, installation and care of StonePeak large porcelain panels. No warranty, however implied or expressed, is given in relation to the procedures outlined in this technical information except that is required by industry standards.

StonePeak Ceramics assumes that the designers, fabricators and installers using our large porcelain panels, are familiar with all aspects outlined in the information provided and strictly adhere to the recommendations and specifications described herein and by ANSI industry standards. Any deviation from the recommended guidelines may result in the products not performing as expected and may result in the warranty becoming null and void. Though every care and precaution has been taken in the preparation of this document, StonePeak Ceramics assumes no responsibility for errors and or omissions, or for the damages resulting from the use of information contained in the information hereby provided.

StonePeak Ceramics shall not be liable for any loss of profit or any other loss or damage caused or alleged to have been caused either directly or indirectly as a result of any person solely relying upon any information contained in this manual.

StonePeak Ceramics reserves to change or modify this manual or its electronic version from time to time without notice, it is the responsibility of the consumer to consult or contact StonePeak Ceramics for the latest version or updates.

For more information and to view our informative videos for handling/shipping, cutting/fabricating, floor and wall installations of our Plane collection – large porcelain panels, please visit our website www.stonepeakceramics.com

LIMITATIONS AND RESPONSIBILITIES

high tech porcelain

Documents

high tech porcelain · Quartz Surface GraniteMarble Concrete Stain Concrete Laminate ... provide the aesthetics of a beautiful marble or stone, but contain the durability of porcelain