Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
HIGH-SPEED CONNECTORSMULTI-GIGABIT HYBRID
High speed solutions for mission critical applications. Configurable
sRIO XAUI FIREWIRE PCIe USB ETHERNET CameraLink
REV - [email protected] High Speed
CTHS027 www.airborn.com ii
July 2010
AirBorn is an international, middle-market, value added solutions provider. For over 50 years, our foundationhas been connector manufacturing, producing integrated technology solutions for high reliabilityapplications for the military and aerospace markets. The customer base expanded to include a wide range ofconnectors, power supplies, flexible circuits, and value added services and solutions. We are proud to havebecome very well known for our value added service and high quality of the products we provide. Wepartner with our customers in multiple industries: aerospace/avionics, defense, geophysical, energy,industrial, automotive and medical.
This catalog contains performance information and technical drawings to provide a solution from designstage through production specifications. The products in this catalog are organized by the AirBorn partnumber assigned to them.
Each connector part number identifies six elements:SeriesModules and ContactsBody StyleContact TerminationBody Material and Body FinishHardware (optional)
Each catalog page shows the choices available for each of these elements. If you do not find a particularconnector size or option, please contact AirBorn for further assistance. AirBorn can manufacture specialconfigurations for your exact specifications.
AirBorn International LTD1 Crockham Park
Edenbridge, Kent, TN8 6SRUnited Kingdom
AirBorn4321 AirBorn Drive
Addison, TX 75001-0519United States
AirBorn3500 AirBorn Circle
Georgetown, TX 78626United States
Phone: +44-1732-865555 Fax: +44-1732-865666 E-mail: [email protected]
Phone: (972) 931-3200 Fax: (972) 931-9305 E-mail: [email protected]
Phone: (512) 863-5585 Fax: (512) 863-8259 E-mail: [email protected]
REV - [email protected] High Speed
CTHS026 www.airborn.com 1
RUGGED HIGH SPEED CONNECTORS
TABLE OF CONTENTS
TECHNICAL INFORMATION
Specifications ....................................................................................................................................... 2Performance ......................................................................................................................................... 3High Speed Performance – Eye Pattern................................................................................................ 5Body Length Calculation ....................................................................................................................... 6Examples of Standard Rugged Interface Layouts .................................................................................. 7
RUGGED CONNECTORS
Cable – I/O .......................................................................................................................................... 8Jumper Cable – I/O ............................................................................................................................ 10Horizontal Surface Mount ................................................................................................................... 12Horizontal Surface Mount PCB Layout ................................................................................................ 14Vertical Surface Mount w/ Fixed Hardware.......................................................................................... 16Vertical Surface Mount w/ Turning Hardware ...................................................................................... 17Vertical Surface Mount PCB Layout – Fixed Hardware / Staggered Leads .......................................... 20Vertical Surface Mount PCB Layout – Fixed Hardware / Single-Sided Leads....................................... 22Vertical Surface Mount PCB Layout – Turning Hardware / Staggered Leads ....................................... 24Vertical Surface Mount PCB Layout – Turning Hardware / Single-Sided Leads ................................... 26
ADDITIONAL INFORMATION
Wire Codes ........................................................................................................................................ 28Hardware ........................................................................................................................................... 29
High Speed [email protected] REV -
2 www.airborn.com CTHS001
SpecificationsMaterials and Finishes*
Contacts: Pins: BeCu alloy strip per ASTM B 194Sockets: Brass per ASTM B 121/B 121M, ASTM B 16/B 16M, ASTM B 453
Contact Finish: Gold plate per ASTM B 488
Embedment: Insulating compound per MIL-I-16923
Molded Insulators: Glass filled Liquid Crystal Polymer (LCP) per MIL-M-24519
Shells: Aluminum Alloy 6061-T6 per QQ-A-250/11 or 6061-T5611 per QQ-A-200/8
Aluminum Electroless Nickel per SAE AMS-2404Shell Finishes: Electrodeposited Cadmium per SAE AMS-QQ-P-416
Gold per MIL-DTL-45204
Jackscrews and Corrosion resistant steel per ASTM A 484/A 484M and ASTM A 582/A 582M,Jacknuts: Passivated per SAE AMS-2700
Face Seal Gaskets: Fluorosilicone per SAE AMS-R-25988
Tolerances: Unless otherwise specified: Fractions = ±1/64Decimals = ±0.010Angles = ±5°Wire LengthsInsulated/stranded = +1.0”/-0.0”
* = Reference the above listed specifications or an equivalent industry standard when applicable.
REV - [email protected] High Speed
CTHS002 www.airborn.com 3
Performance*
High Speed Per Quad Module:Differential Pairs: Pair 1 – 3
Pair 2 – 4
Differential Impedance: 100 ±10 **110 ±6 **
Wire Size: Signal: Stranded 24 AWG, 26 AWG, 28 AWG, or 30 AWGHigh Speed: Stranded 24 AWG, 26 AWG, 28 AWG, or 30 AWGPCB Leads: Solid 28 AWG
Signal Contact Rating: 3-amperes maximum
Test Voltage: 600 V, RMS, 60 Hz
Operating Temperature: -55°C to +125°C
Insulation Resistance: 5000 megohms minimum @ 500 VDC
Durability: 500 connector mating cycles
Vibration: Tested in accordance with MIL-STD-1344, Method 2005, Condition IV
Shock: Tested in accordance with MIL-STD-1344, Method 2004, Condition E
Salt Spray: Mated connectors tested in accordance with MIL-STD-1344, Method 1001,Test Condition B
Humidity: Mated connectors tested in accordance with MIL-STD-1344, Method 1002,Type II (except steps 7a and 7b)
Thermal Shock: Tested to the temperature extremes of MIL-STD-1344, Method 1003,Test Condition A (except step 3, temperature shall be 125°C)
Contact Resistance: 0.065 Volt maximum drop @ 2.5 amps (0.026 )
Contact Engaging Force: 6.0 ounce maximum, with 0.0221 diameter test sleeve
Contact Separating Force: 0.5 ounce minimum, with 0.023 diameter test sleeve
* = Signals and overall construction meets or exceeds MIL-DTL-83513 Performance Specifications.** = Differential impedance in the mated connectors shall be the stated impedance ±20 when measured using a TDR pulse with a rise time of 250 ps when mated connectors are terminated to equal impedance differential cables.
REV - [email protected] High Speed
CTHS004 www.airborn.com 5
High Speed PerformanceEye Pattern
Sample results of eye patterns using 110 30 AWG Quadrax Cable using an IEEE 1394B mask running at 2 Gbps.Cable length is 3 feet and 14.7 feet.
Contact factory for application specific questions.
3 Feet
14.7 Feet
DIMENSION
MODULE 0.200
SIG10 0.321
SIG20 0.571
SIG30 0.821
SIG40 1.071
SIG50 1.321
PLUS
PLUS
0.896
= BODY LENGTH
TABLE A
TABLE BGAP DIMENSION IF GAP DIMENSION IFPREVIOUS ZONE PREVIOUS ZONEIS SIGxx IS MODULE
MODULE 0.028 0.025
SIGxx 0.028
EXAMPLE:MMHS-02R1-11B-006-2000 =Plug, 2 High Speed Modules + 10 position Signal
(0.200 X 2) + 0.321 = .721Plus Gaps = (.025 + .028 = .053) + .721 = .774Plus Constant = (.896) + .774 = 1.670 INCHES
INSTRUCTIONS:1. Select quantity of modules (1-10) and, if needed, a SIGxx from Table A.2. Add the sum of the selections from Table A to the sum of the gaps between modules and SIGxx's from Table B.3. Add 0.896 to your previous sum to get the body length.
NOTES:1. Do not exceed 3.25 inches body length.2. Modules may go next to modules or SIGxx's.3. Signals (SIGxx) may only go next to modules.4. Only count gaps between insulators: not before the first insulator or after the last insulator.5. By default, modules will be next to the square end of the interface, not the key end.6. Consult factory for alternate configurations (alternating modules/SIGxx's, etc.)
8 MOD, NO SIGNALS, RIGHT KEY(MODULES AND CONTACT POSITION NUMBERING)
2 MOD, 10 SIG, LEFT KEY
2 MOD, 10 SIG, RIGHT KEY
WHEN COMBINING MODULES AND SIGNALSMODULES ARE ON NON-KEY SIDE OF THE INTERFACE
2 MOD, 10 SIG, LEFT KEY
2 MOD, 10 SIG, RIGHT KEY
PLUGS RECEPTACLESKEY
LEFT
RIGHT
8 MOD, NO SIGNALS, RIGHT KEY(MODULES AND CONTACT POSITION NUMBERING)
RECEPTACLEPLUG
1 thru 10 High Speed Modules
RECEPTACLE
0 thru 50 Signal Contacts
PLUG
DIMENSIONS
ABODY LENGTH PER TABLECALCULATION (SEE PAGE 6)
B "A" MINUS 0.744C "A" MINUS 0.680D "A" MINUS 0.320Y "A" MINUS 0.624
INTERFACE DIMENSIONS
** = Captivated hardware is factory installed and non-removable.
(MMHS mates with MMHS, MKHS, MLHS, MJHS receptacles)HIGH SPEED Rugged Metal I/O Connector
1 High Speed Module01
MMHS
* = Left and right key is determined by looking at the PLUG interface with the
2 High Speed Modules023 High Speed Modules034 High Speed Modules04
*** = Refer to catalog Page 29 for keying options.
1. All high-speed receptacles have fluoropolymer interfacial seals.
(MMHS mates with MMHS, MKHS, MLHS, MJHS plugs)HIGH SPEED Rugged Metal I/O ConnectorMMHS
PLUG RECEPTACLESERIES SERIES
HIGH SPEED MODULES
5 High Speed Modules (Max Signal Count 40)056 High Speed Modules (Max Signal Count 30)067 High Speed Modules (Max Signal Count 20)078 High Speed Modules (Max Signal Count 10)08
SIGNAL CONTACTS*Left Side Key - No Signal ContactsL0Left Side Key - 10 Signal ContactsL1Left Side Key - 20 Signal ContactsL2Left Side Key - 30 Signal ContactsL3Left Side Key - 40 Signal ContactsL4Left Side Key - 50 Signal ContactsL5Right Side Key - No Signal ContactsR0Right Side Key - 10 Signal ContactsR1Right Side Key - 20 Signal ContactsR2Right Side Key - 30 Signal ContactsR3Right Side Key - 40 Signal ContactsR4Right Side Key - 50 Signal ContactsR5
1 High Speed Module012 High Speed Modules023 High Speed Modules034 High Speed Modules04
SIGNAL CONTACTS*
HIGH SPEED MODULES
BODY STYLE BODY STYLEPlug1 Receptacle2
Receptacle with Ground Fingers (Preferred)4WIRE TYPE & GAUGE - HIGH SPEED
See Wire Code Page for High Speed CableXWIRE TYPE & GAUGE - HIGH SPEED
WIRE TYPE & GAUGE - SIGNALSNo Signal Contacts0
WIRE TYPE & GAUGE - SIGNALS
See Wire Code PageX
WIRE LENGTHWire Length in Inches - (Uses 3 digits)(Example: 018 = 18 Inches) Minimum 3 Inches
WIRE LENGTH
BODY PLATING (LCP INSULATORS)
Electroless Nickel Plated Aluminum Shell2Electrodeposited Cadmium Plated Aluminum Shell3
Gold Plated Aluminum Shell6
BODY PLATING (LCP INSULATORS)
HARDWARENo Hardware000
HARDWARE
Two Fixed Jacknuts - Captivated **620Two Turning Jackscrews, Allen Head, Captivated **810
NXX Keying Jackpost Hardware, See Options ***JXX
= Option not RoHS compliant in plating and/or internal terminations.
LONG SIDE downward. The key is the angled side of the interface.
9 High Speed Modules (Max Signal Count 10)0910 High Speed Modules (No Signals)0A
5 High Speed Modules (Max Signal Count 40)056 High Speed Modules (Max Signal Count 30)067 High Speed Modules (Max Signal Count 20)078 High Speed Modules (Max Signal Count 10)089 High Speed Modules (Max Signal Count 10)0910 High Speed Modules (No Signals)0A
Left Side Key - No Signal ContactsL0Left Side Key - 10 Signal ContactsL1Left Side Key - 20 Signal ContactsL2Left Side Key - 30 Signal ContactsL3Left Side Key - 40 Signal ContactsL4Left Side Key - 50 Signal ContactsL5Right Side Key - No Signal ContactsR0Right Side Key - 10 Signal ContactsR1Right Side Key - 20 Signal ContactsR2Right Side Key - 30 Signal ContactsR3Right Side Key - 40 Signal ContactsR4Right Side Key - 50 Signal ContactsR5
See Wire Code Page for High Speed CableX
No Signal Contacts0See Wire Code PageX
Wire Length in Inches - (Uses 3 digits)(Example: 018 = 18 Inches) Minimum 3 Inches
Electroless Nickel Plated Aluminum Shell2Electrodeposited Cadmium Plated Aluminum Shell3
Gold Plated Aluminum Shell6
Keying Jackscrew Hardware, See Options ***
No Hardware000Two Fixed Jacknuts - Captivated **620Two Turning Jackscrews, Allen Head, Captivated **810
NXXJXX
NOTES:
Keying Jackpost Hardware, See Options ***Keying Jackscrew Hardware, See Options ***
Electroless Nickel Plated Aluminum Shell - RoHS Compliant1 1
Gold Plated Aluminum Shell - RoHS Compliant5 5
Electroless Nickel Plated Aluminum Shell - RoHS Compliant
Gold Plated Aluminum Shell - RoHS Compliant
1 thru 10 High Speed Modules0 thru 50 Signal Contacts
PLUG
DIMENSIONS
ABODY LENGTH PER TABLECALCULATION (SEE PAGE 6)
B "A" MINUS 0.744C "A" MINUS 0.680D "A" MINUS 0.320Y "A" MINUS 0.624
INTERFACE DIMENSIONS
RECEPTACLE
MATING FACE ORIENTATION
PLUG TO PLUG PLUG TO RCPT RCPT TO RCPT
CONNECTOR 1 CONNECTOR 2
(MJHS mates with MKHS, MLHS, and MMHS connectors)HIGH SPEED Rugged Metal Jumper AssemblyMJHS
SERIES
HIGH SPEED MODULES
SIGNAL CONTACTS*Left Side Key - No Signal ContactsL0Left Side Key - 10 Signal ContactsL1Left Side Key - 20 Signal ContactsL2Left Side Key - 30 Signal ContactsL3Left Side Key - 40 Signal ContactsL4Left Side Key - 50 Signal ContactsL5
Right Side Key - No Signal ContactsR0Right Side Key - 10 Signal ContactsR1Right Side Key - 20 Signal ContactsR2Right Side Key - 30 Signal ContactsR3Right Side Key - 40 Signal ContactsR4Right Side Key - 50 Signal ContactsR5
BODY STYLE AND 2ND CONNECTOR KEYPlug to Plug - Left Side Key1
JUMPER:
WIRE TYPE & GAUGE - HIGH SPEEDSee Wire Code Page for High Speed CableX
WIRE TYPE & GAUGE - SIGNALSNo Signal Contacts0See Wire Code PageX
WIRE LENGTH
BODY PLATING (LCP INSULATORS)
Electroless Nickel Plated Aluminum Shell2Electrodeposited Cadmium Plated Aluminum Shell3
Gold Plated Aluminum Shell6HARDWARE
No Hardware000Two Fixed Jacknuts - Captivated ** - Both Connectors620Two Turning Jackscrews, Allen Head - Captivated ** - Both Connectors810
NXX Keying Jackpost Hardware, See Options *** - Both ConnectorsJXX Keying Jackscrew Hardware, See Options *** - Both Connectors
Plug to Receptacle - Left Side Key2Plug to Receptacle with Ground Fingers - Left Side Key3Receptacle to Receptacle - Left Side Key4Receptacle to Receptacle, both with Ground Fingers - Left Side Key5
6789A
Plug to Plug - Right Side KeyPlug to Receptacle - Right Side KeyPlug to Receptacle with Ground Fingers - Right Side KeyReceptacle to Receptacle - Right Side KeyReceptacle to Receptacle, both with Ground Fingers - Right Side Key
Two Fixed Jacknuts - Captivated ** - Two Turning Jackscrews, Allen Head - Captivated **860
(Jacknuts on Receptacle for Body Styles 2, 3, 7, & 8)
Two Fixed Jacknuts - Captivated ** - Two Turning Jackscrews, Allen Head - Captivated **870(Jacknuts on Plug for Body Styles 2, 3, 7, & 8)
Two Keying Jacknuts *** - Two Keying Jackscrews ***AXX
BXX
1 High Speed Module012 High Speed Modules023 High Speed Modules034 High Speed Modules045 High Speed Modules (Max Signal Count 40)05
6 High Speed Modules (Max Signal Count 30)067 High Speed Modules (Max Signal Count 20)078 High Speed Modules (Max Signal Count 10)08
Wire Length in Inches - (Uses 3 digits)(Example: 018 = 18 Inches) Minimum 3 Inches
9 High Speed Modules (Max Signal Count 10)0910 High Speed Modules (No Signals)0A
(Jacknuts on Receptacle for Body Styles 2, 3, 7, & 8)
(Jacknuts on Plug for Body Styles 2, 3, 7, & 8)Two Keying Jacknuts *** - Two Keying Jackscrews ***
For best performance,Receptacles with GroundFingers are preferred
** = Captivated hardware is factory installed and non-removable.
* = Left and right key is determined by looking at the PLUG interface with the
*** = Refer to catalog Page 29 for keying options.
1. All high-speed receptacles have fluoropolymer interfacial seals.= Option not RoHS compliant in plating and/or internal terminations.
LONG SIDE downward. The key is the angled side of the interface.
NOTES:
Electroless Nickel Plated Aluminum Shell - RoHS Compliant1
Gold Plated Aluminum Shell - RoHS Compliant5
1 thru 10 High Speed Modules
RECEPTACLE
0 thru 50 Signal Contacts
PLUG
INTERFACE DIMENSIONS
DIMENSIONS
ABODY LENGTH PER TABLECALCULATION (SEE PAGE 6)
B "A" MINUS 0.744C "A" MINUS 0.640D "A" MINUS 0.320E "A" MINUS 0.096Y "A" MINUS 0.624
(MKHS mates with MMHS, MJHS receptacles)HIGH SPEED Rugged Metal Horizontal SMTMKHS
(MKHS mates with MMHS, MJHS plugs)HIGH SPEED Rugged Metal Horizontal SMTMKHS
PLUG RECEPTACLESERIES SERIES
BODY STYLE BODY STYLEPlug100 Receptacle200
Receptacle with Ground Fingers (Preferred)400
CONTACT TERMINATIONPin, Horizontal SMT17
CONTACT TERMINATIONSocket, Horizontal SMT27
TERMINATION PLATING50 micro" Gold Contact, Sn/Pb Alloy Termination5
TERMINATION PLATING
50 micro" Gold Contact, SAC305 Plated Termination7
BODY PLATING (LCP INSULATORS) BODY PLATING (LCP INSULATORS)
1 High Speed Module012 High Speed Modules023 High Speed Modules034 High Speed Modules04
HIGH SPEED MODULES
5 High Speed Modules (Max Signal Count 40)056 High Speed Modules (Max Signal Count 30)067 High Speed Modules (Max Signal Count 20)078 High Speed Modules (Max Signal Count 10)08
SIGNAL CONTACTS*Left Side Key - No Signal ContactsL0Left Side Key - 10 Signal ContactsL1Left Side Key - 20 Signal ContactsL2Left Side Key - 30 Signal ContactsL3Left Side Key - 40 Signal ContactsL4Left Side Key - 50 Signal ContactsL5Right Side Key - No Signal ContactsR0Right Side Key - 10 Signal ContactsR1Right Side Key - 20 Signal ContactsR2Right Side Key - 30 Signal ContactsR3Right Side Key - 40 Signal ContactsR4Right Side Key - 50 Signal ContactsR5
1 High Speed Module012 High Speed Modules023 High Speed Modules034 High Speed Modules04
SIGNAL CONTACTS*
HIGH SPEED MODULES
Electroless Nickel Plated Aluminum Shell2Electrodeposited Cadmium Plated Aluminum Shell3Gold Plated Aluminum Shell6
HARDWARENo Hardware000
HARDWARE
Two Fixed Jacknuts - Captivated **620Two Turning Jackscrews, Allen Head, Captivated **810
NXX Keying Jackpost Hardware, See Options ***JXX
9 High Speed Modules (Max Signal Count 10)0910 High Speed Modules (No Signals)0A
5 High Speed Modules (Max Signal Count 40)056 High Speed Modules (Max Signal Count 30)067 High Speed Modules (Max Signal Count 20)078 High Speed Modules (Max Signal Count 10)089 High Speed Modules (Max Signal Count 10)0910 High Speed Modules (No Signals)0A
Left Side Key - No Signal ContactsL0Left Side Key - 10 Signal ContactsL1Left Side Key - 20 Signal ContactsL2Left Side Key - 30 Signal ContactsL3Left Side Key - 40 Signal ContactsL4Left Side Key - 50 Signal ContactsL5Right Side Key - No Signal ContactsR0Right Side Key - 10 Signal ContactsR1Right Side Key - 20 Signal ContactsR2Right Side Key - 30 Signal ContactsR3Right Side Key - 40 Signal ContactsR4Right Side Key - 50 Signal ContactsR5
Electroless Nickel Plated Aluminum Shell2Electrodeposited Cadmium Plated Aluminum Shell3Gold Plated Aluminum Shell6
Keying Jackscrew Hardware, See Options ***
No Hardware000Two Fixed Jacknuts - Captivated **620Two Turning Jackscrews, Allen Head, Captivated **810
NXXJXX
50 micro" Gold Contact, Sn/Pb Alloy Termination550 micro" Gold Contact, SAC305 Plated Termination7
** = Captivated hardware is factory installed and non-removable.
* = Left and right key is determined by looking at the PLUG interface with the
*** = Refer to catalog Page 29 for keying options.
1. All high-speed receptacles have fluoropolymer interfacial seals.= Option not RoHS compliant
LONG SIDE downward. The key is the angled side of the interface.
NOTES:
Keying Jackpost Hardware, See Options ***Keying Jackscrew Hardware, See Options ***
RUGGED H-SMT
INSULATOR A = SIGNAL CONTACTSCONNECTOR MATING FACE (PLUG)
PC BOARD LAYOUTCOMPONENT SIDE
PLUG, RIGHT SIDE KEYINSULATOR A = SIGNAL CONTACTS
DIMENSIONS
ABODY LENGTH PER TABLECALCULATION (SEE PAGE 6)MINUS 0.097
B "A" MINUS 0.224
SIGNAL CONTACT NUMBERING
SIG10 SIG20 SIG30 SIG40 SIG50
Zx 5 10 15 20 25
Zy 6 11 16 21 26
Zz 10 20 30 40 50
INSULATOR A = MODULE CONTACTSCONNECTOR MATING FACE (PLUG)
RIGHT SIDE KEY
LEFT SIDE KEY
2 MODULES + SIGNAL SHOWN
PC BOARD LAYOUTCOMPONENT SIDE
PLUG, LEFT SIDE KEYINSULATOR A = MODULE CONTACTS
2 MODULES + SIGNAL SHOWN
1. Connector module leads M3 and M4 are .080" longer than M1 and M2.NOTES:
PCB traces or IC programming will be required to compensate for this.
RUGGED H-SMT
PART NUMBER = RIGHT SIDE KEY
CONNECTOR MATING FACE (RECEPTACLE)INSULATOR A = SIGNAL CONTACTS
PC BOARD LAYOUTCOMPONENT SIDE
RECEPTACLE, RIGHT SIDE KEYINSULATOR A = SIGNAL CONTACTS
DIMENSIONS
ABODY LENGTH PER TABLECALCULATION (SEE PAGE 6)MINUS 0.097
B "A" MINUS 0.224
SIGNAL CONTACT NUMBERING
SIG10 SIG20 SIG30 SIG40 SIG50
Zx 5 10 15 20 25
Zy 6 11 16 21 26
Zz 10 20 30 40 50
PART NUMBER = LEFT SIDE KEY
CONNECTOR MATING FACE (RECEPTACLE)INSULATOR A = MODULE CONTACTS
2 MODULES + SIGNAL SHOWN
PC BOARD LAYOUTCOMPONENT SIDE
RECEPTACLE, LEFT SIDE KEYINSULATOR A = MODULE CONTACTS
2 MODULES + SIGNAL SHOWN
1. Connector module leads M3 and M4 are .080" longer than M1 and M2NOTES:
PCB traces or IC programming will be required to compensate for this.2. Receptacle interface key is swapped left-to-right from part number
callout when looking at the receptacle interface.
1 thru 10 High Speed Modules
RECEPTACLE
0 thru 50 Signal Contacts
PLUG
INTERFACE DIMENSIONSDIMENSIONS
AOVERALL LENGTH PER TABLECALCULATION (SEE PAGE 6)
B "A" MINUS 0.744C "A" MINUS 0.640D "A" MINUS 0.320E "A" MINUS 0.570Y "A" MINUS 0.624
SINGLE-SIDEDLEADS SHOWN
STAGGEREDLEADS SHOWN
(MLHS mates with MMHS, MJHS receptacles)HIGH SPEED Rugged Metal Vertical SMTMLHS
(MLHS mates with MMHS, MJHS plugs)HIGH SPEED Rugged Metal Vertical SMTMLHS
PLUG RECEPTACLESERIES SERIES
HIGH SPEED MODULES
SIGNAL CONTACTS* SIGNAL CONTACTS*
HIGH SPEED MODULES
BODY STYLE BODY STYLE
CONTACT TERMINATIONPin, Vertical SMT, Staggered Leads - All37
CONTACT TERMINATION47
TERMINATION PLATING TERMINATION PLATING
BODY PLATING (LCP INSULATORS) BODY PLATING (LCP INSULATORS)
HARDWARE HARDWARE
Plug100 Receptacle200Receptacle with Ground Fingers (Preferred)400
Left Side Key - No Signal ContactsL0Left Side Key - 10 Signal ContactsL1Left Side Key - 20 Signal ContactsL2Left Side Key - 30 Signal ContactsL3Left Side Key - 40 Signal ContactsL4Left Side Key - 50 Signal ContactsL5Right Side Key - No Signal ContactsR0Right Side Key - 10 Signal ContactsR1Right Side Key - 20 Signal ContactsR2Right Side Key - 30 Signal ContactsR3Right Side Key - 40 Signal ContactsR4Right Side Key - 50 Signal ContactsR5
Electroless Nickel Plated Aluminum Shell2Electrodeposited Cadmium Plated Aluminum Shell3Gold Plated Aluminum Shell6
Left Side Key - No Signal ContactsL0Left Side Key - 10 Signal ContactsL1Left Side Key - 20 Signal ContactsL2Left Side Key - 30 Signal ContactsL3Left Side Key - 40 Signal ContactsL4Left Side Key - 50 Signal ContactsL5Right Side Key - No Signal ContactsR0Right Side Key - 10 Signal ContactsR1Right Side Key - 20 Signal ContactsR2Right Side Key - 30 Signal ContactsR3Right Side Key - 40 Signal ContactsR4Right Side Key - 50 Signal ContactsR5
Electroless Nickel Plated Aluminum Shell2Electrodeposited Cadmium Plated Aluminum Shell3Gold Plated Aluminum Shell6
1 High Speed Module012 High Speed Modules023 High Speed Modules034 High Speed Modules045 High Speed Modules (Max Signal Count 40)056 High Speed Modules (Max Signal Count 30)067 High Speed Modules (Max Signal Count 20)078 High Speed Modules (Max Signal Count 10)08
1 High Speed Module012 High Speed Modules023 High Speed Modules034 High Speed Modules04
9 High Speed Modules (Max Signal Count 10)0910 High Speed Modules (No Signals)0A
5 High Speed Modules (Max Signal Count 40)056 High Speed Modules (Max Signal Count 30)067 High Speed Modules (Max Signal Count 20)078 High Speed Modules (Max Signal Count 10)089 High Speed Modules (Max Signal Count 10)0910 High Speed Modules (No Signals)0A
50 micro" Gold Contact, Sn/Pb Alloy Termination550 micro" Gold Contact, SAC305 Plated Termination7
50 micro" Gold Contact, Sn/Pb Alloy Termination550 micro" Gold Contact, SAC305 Plated Termination7
No Hardware000Two Fixed Jacknuts - Captivated **620
NXX Keying Jackpost Hardware, See Options ***
No Hardware000Two Fixed Jacknuts - Captivated **620
NXX Keying Jackpost Hardware, See Options ***
Pin, Vertical SMT, Staggered Leads - High Speed57 67
Pin, Vertical SMT, Single-Sided Leads - High Speed77 87Single-Sided Leads - Signals
Staggered Leads - SignalsPin, Vertical SMT, Single-Sided Leads - AllA7
Socket, Vertical SMT, Staggered Leads - AllSocket, Vertical SMT, Staggered Leads - High Speed
Socket, Vertical SMT, Single-Sided Leads - High SpeedSingle-Sided Leads - Signals
Staggered Leads - SignalsSocket, Vertical SMT, Single-Sided Leads - AllB7
** = Captivated hardware is factory installed and non-removable.
* = Left and right key is determined by looking at the PLUG interface with the
*** = Refer to catalog Page 29 for keying options.
1. All high-speed receptacles have fluoropolymer interfacial seals.
= Option not RoHS compliant
LONG SIDE downward. The key is the angled side of the interface.
NOTES:
2. Staggered leads always start on the major side for the first high speed module.3. Single-sided leads are always on the major side.
1 thru 10 High Speed Modules
RECEPTACLE
DIMENSIONS
ABODY LENGTH (W/O FEET) FOR V-SMT TURNINGHARDWARE PER TABLE CALCULATION (SEE PAGE 6)
B "A" MINUS 0.744C "A" MINUS 0.640D "A" MINUS 0.320E "A" MINUS 0.570F "A" PLUS 0.430G "F" MINUS 0.250Y "A" MINUS 0.624
PLUG
INTERFACE DIMENSIONS
0 thru 50 Signal Contacts
SINGLE-SIDEDLEADS SHOWN
STAGGEREDLEADS SHOWN
(MLHS mates with MMHS, MJHS receptacles)HIGH SPEED Rugged Metal Vertical SMTMLHS
(MLHS mates with MMHS, MJHS plugs)HIGH SPEED Rugged Metal Vertical SMTMLHS
PLUG RECEPTACLESERIES SERIES
HIGH SPEED MODULES
SIGNAL CONTACTS* SIGNAL CONTACTS*
HIGH SPEED MODULES
BODY STYLE BODY STYLE
CONTACT TERMINATION CONTACT TERMINATION
TERMINATION PLATING TERMINATION PLATING
BODY PLATING (LCP INSULATORS) BODY PLATING (LCP INSULATORS)
HARDWARE HARDWARE
Plug, Vertical SMT w/ Mounting Ears300 Receptacle, Vertical SMT w/Mounting Ears600Receptacle with Ground Fingers (Preferred),800
Left Side Key - No Signal ContactsL0Left Side Key - 10 Signal ContactsL1Left Side Key - 20 Signal ContactsL2Left Side Key - 30 Signal ContactsL3Left Side Key - 40 Signal ContactsL4Left Side Key - 50 Signal ContactsL5Right Side Key - No Signal ContactsR0Right Side Key - 10 Signal ContactsR1Right Side Key - 20 Signal ContactsR2Right Side Key - 30 Signal ContactsR3Right Side Key - 40 Signal ContactsR4Right Side Key - 50 Signal ContactsR5
Electroless Nickel Plated Aluminum Shell2Electrodeposited Cadmium Plated Aluminum Shell3Gold Plated Aluminum Shell6
Left Side Key - No Signal ContactsL0Left Side Key - 10 Signal ContactsL1Left Side Key - 20 Signal ContactsL2Left Side Key - 30 Signal ContactsL3Left Side Key - 40 Signal ContactsL4Left Side Key - 50 Signal ContactsL5Right Side Key - No Signal ContactsR0Right Side Key - 10 Signal ContactsR1Right Side Key - 20 Signal ContactsR2Right Side Key - 30 Signal ContactsR3Right Side Key - 40 Signal ContactsR4Right Side Key - 50 Signal ContactsR5
Electroless Nickel Plated Aluminum Shell2Electrodeposited Cadmium Plated Aluminum Shell3Gold Plated Aluminum Shell6
1 High Speed Module012 High Speed Modules023 High Speed Modules034 High Speed Modules045 High Speed Modules (Max Signal Count 40)056 High Speed Modules (Max Signal Count 30)067 High Speed Modules (Max Signal Count 20)078 High Speed Modules (Max Signal Count 10)08
1 High Speed Module012 High Speed Modules023 High Speed Modules034 High Speed Modules04
9 High Speed Modules (Max Signal Count 10)0910 High Speed Modules (No Signals)0A
5 High Speed Modules (Max Signal Count 40)056 High Speed Modules (Max Signal Count 30)067 High Speed Modules (Max Signal Count 20)078 High Speed Modules (Max Signal Count 10)089 High Speed Modules (Max Signal Count 10)0910 High Speed Modules (No Signals)0A
50 micro" Gold Contact, Sn/Pb Alloy Termination550 micro" Gold Contact, SAC305 Plated Termination7
50 micro" Gold Contact, Sn/Pb Alloy Termination550 micro" Gold Contact, SAC305 Plated Termination7
No Hardware000Two Turning Jackscrews, Allen Head, Captivated **810
JXX Keying Jackscrew Hardware, See Options ***
No Hardware000Two Turning Jackscrews, Allen Head, Captivated **810
JXX Keying Jackscrew Hardware, See Options ***
** = Captivated hardware is factory installed and non-removable.
* = Left and right key is determined by looking at the PLUG interface with the
NOTES:
*** = Refer to catalog Page 29 for keying options.
1. All high-speed receptacles have fluoropolymer interfacial seals.
Pin, Vertical SMT, Staggered Leads - All37 47
LONG SIDE downward. The key is the angled side of the interface.
Pin, Vertical SMT, Staggered Leads - High Speed57 67
Pin, Vertical SMT, Single-Sided Leads - High Speed77 87Single-Sided Leads - Signals
Staggered Leads - SignalsPin, Vertical SMT, Single-Sided Leads - AllA7
Socket, Vertical SMT, Staggered Leads - AllSocket, Vertical SMT, Staggered Leads - High Speed
Socket, Vertical SMT, Single-Sided Leads - High SpeedSingle-Sided Leads - Signals
Staggered Leads - SignalsSocket, Vertical SMT, Single-Sided Leads - AllB7
2. Staggered leads always start on the major side for the first high speed module.3. Single-sided leads are always on the major side.
Vertical SMT w/Mounting Ears
RUGGED V-SMT
INSULATOR A = SIGNAL CONTACTSCONNECTOR MATING FACE (PLUG)
PC BOARD LAYOUTCOMPONENT SIDE
PLUG, RIGHT SIDE KEYINSULATOR A = SIGNAL CONTACTS
DIMENSIONS
ABODY LENGTH PER TABLECALCULATION (SEE PAGE 6)MINUS 0.570
B "A" PLUS 0.250
SIGNAL CONTACT NUMBERING
SIG10 SIG20 SIG30 SIG40 SIG50
Sx 5 10 15 20 25
Sy 6 11 16 21 26
Sz 10 20 30 40 50
INSULATOR A = MODULE CONTACTSCONNECTOR MATING FACE (PLUG)
RIGHT SIDE KEY
LEFT SIDE KEY
3 MODULES + SIGNAL SHOWN
FIXED HARDWARE
PC BOARD LAYOUTCOMPONENT SIDE
PLUG, LEFT SIDE KEYINSULATOR A = MODULE CONTACTS
3 MODULES + SIGNAL SHOWN
1. For module leads exiting the MAJOR SIDE, leads M3 and M4NOTES:
are .080" longer than M1 and M2.2. For module leads exiting the MINOR SIDE, leads M1 and M2
are .080" longer than M3 and M4.3. PCB traces or IC programming will be required to compensate
for lead length variation.
STAGGERED LEADS
RUGGED V-SMT
PART NUMBER = RIGHT SIDE KEY
CONNECTOR MATING FACE (RECEPTACLE)INSULATOR A = SIGNAL CONTACTS
PC BOARD LAYOUTCOMPONENT SIDE
RECEPTACLE, RIGHT SIDE KEYINSULATOR A = SIGNAL CONTACTS
DIMENSIONS
ABODY LENGTH PER TABLECALCULATION (SEE PAGE 6)MINUS 0.570
B "A" PLUS 0.250
SIGNAL CONTACT NUMBERING
SIG10 SIG20 SIG30 SIG40 SIG50
Sx 5 10 15 20 25
Sy 6 11 16 21 26
Sz 10 20 30 40 50
PART NUMBER = LEFT SIDE KEY
CONNECTOR MATING FACE (RECEPTACLE)INSULATOR A = MODULE CONTACTS
3 MODULES + SIGNAL SHOWN
PC BOARD LAYOUTCOMPONENT SIDE
RECEPTACLE, LEFT SIDE KEYINSULATOR A = MODULE CONTACTS
3 MODULES + SIGNAL SHOWN
FIXED HARDWARE
1. For module leads exiting the MAJOR SIDE, leads M3 and M4NOTES:
are .080" longer than M1 and M2.2. For module leads exiting the MINOR SIDE, leads M1 and M2
are .080" longer than M3 and M4.3. PCB traces or IC programming will be required to compensate
for lead length variation.4. Receptacle interface key is swapped left-to-right from part
number callout when looking at the receptacle interface.
STAGGERED LEADS
RUGGED V-SMT
INSULATOR A = SIGNAL CONTACTSCONNECTOR MATING FACE (PLUG)
PC BOARD LAYOUTCOMPONENT SIDE
PLUG, RIGHT SIDE KEYINSULATOR A = SIGNAL CONTACTS
DIMENSIONS
ABODY LENGTH PER TABLECALCULATION (SEE PAGE 6)MINUS 0.570
B "A" PLUS 0.250
SIGNAL CONTACT NUMBERING
SIG10 SIG20 SIG30 SIG40 SIG50
Sx 5 10 15 20 25
Sy 6 11 16 21 26
Sz 10 20 30 40 50
INSULATOR A = MODULE CONTACTSCONNECTOR MATING FACE (PLUG)
RIGHT SIDE KEY
LEFT SIDE KEY
3 MODULES + SIGNAL SHOWN
FIXED HARDWARE
PC BOARD LAYOUTCOMPONENT SIDE
PLUG, LEFT SIDE KEYINSULATOR A = MODULE CONTACTS
3 MODULES + SIGNAL SHOWN
1. For Module leads exiting the MAJOR SIDE, leads M3 and M4NOTES:
are .080" longer than M1 and M2.2. For Module leads exiting the MINOR SIDE, leads M1 and M2
are .080" longer than M3 and M4.3. PCB traces or IC programming will be required to compensate
for lead length variation.
SINGLE-SIDED LEADS
DIMENSIONS
ABODY LENGTH PER TABLECALCULATION (SEE PAGE 6)MINUS 0.570
B "A" PLUS 0.250
SIGNAL CONTACT NUMBERING
SIG10 SIG20 SIG30 SIG40 SIG50
Sx 5 10 15 20 25
Sy 6 11 16 21 26
Sz 10 20 30 40 50
PART NUMBER = LEFT SIDE KEY
CONNECTOR MATING FACE (RECEPTACLE)INSULATOR A = MODULE CONTACTS
PC BOARD LAYOUTCOMPONENT SIDE
RECEPTACLE, LEFT SIDE KEYINSULATOR A = MODULE CONTACTS
3 MODULES + SIGNAL SHOWN
FIXED HARDWARERUGGED V-SMT
PART NUMBER = RIGHT SIDE KEY
CONNECTOR MATING FACE (RECEPTACLE)INSULATOR A = SIGNAL CONTACTS
PC BOARD LAYOUTCOMPONENT SIDE
RECEPTACLE, RIGHT SIDE KEYINSULATOR A = SIGNAL CONTACTS
3 MODULES + SIGNAL SHOWN
1. For module leads exiting the MAJOR SIDE, leads M3 and M4NOTES:
are .080" longer than M1 and M2.2. For module leads exiting the MINOR SIDE, leads M1 and M2
are .080" longer than M3 and M4.3. PCB traces or IC programming will be required to compensate
for lead length variation.4. Receptacle interface key is swapped left-to-right from part
number callout when looking at the receptacle interface.
SINGLE-SIDED LEADS
RUGGED V-SMT
INSULATOR A = SIGNAL CONTACTSCONNECTOR MATING FACE (PLUG)
PC BOARD LAYOUTCOMPONENT SIDE
PLUG, RIGHT SIDE KEYINSULATOR A = SIGNAL CONTACTS
DIMENSIONS
ABODY LENGTH PER TABLECALCULATION (SEE PAGE 6)MINUS 0.570
B "A" PLUS 0.250
SIGNAL CONTACT NUMBERING
SIG10 SIG20 SIG30 SIG40 SIG50
Sx 5 10 15 20 25
Sy 6 11 16 21 26
Sz 10 20 30 40 50
INSULATOR A = MODULE CONTACTSCONNECTOR MATING FACE (PLUG)
RIGHT SIDE KEY
LEFT SIDE KEY
3 MODULES + SIGNAL SHOWN
TURNING HARDWARE
PC BOARD LAYOUTCOMPONENT SIDE
PLUG, LEFT SIDE KEYINSULATOR A = MODULE CONTACTS
3 MODULES + SIGNAL SHOWN
1. For module leads exiting the MAJOR SIDE, leads M3 and M4NOTES:
are .080" longer than M1 and M2.2. For module leads exiting the MINOR SIDE, leads M1 and M2
are .080" longer than M3 and M4.3. PCB traces or IC programming will be required to compensate
for lead length variation.
C "A" PLUS 0.750
STAGGERED LEADS
RUGGED V-SMT
PART NUMBER = RIGHT SIDE KEY
CONNECTOR MATING FACE (RECEPTACLE)INSULATOR A = SIGNAL CONTACTS
PC BOARD LAYOUTCOMPONENT SIDE
RECEPTACLE, RIGHT SIDE KEYINSULATOR A = SIGNAL CONTACTS
SIGNAL CONTACT NUMBERING
SIG10 SIG20 SIG30 SIG40 SIG50
Sx 5 10 15 20 25
Sy 6 11 16 21 26
Sz 10 20 30 40 50
PART NUMBER = LEFT SIDE KEY
CONNECTOR MATING FACE (RECEPTACLE)INSULATOR A = MODULE CONTACTS
3 MODULES + SIGNAL SHOWN
PC BOARD LAYOUTCOMPONENT SIDE
RECEPTACLE, LEFT SIDE KEYINSULATOR A = MODULE CONTACTS
3 MODULES + SIGNAL SHOWN
TURNING HARDWARE
1. For module leads exiting the MAJOR SIDE, leads M3 and M4NOTES:
are .080" longer than M1 and M2.2. For module leads exiting the MINOR SIDE, leads M1 and M2
are .080" longer than M3 and M4.3. PCB traces or IC programming will be required to compensate
for lead length variation.4. Receptacle interface key is swapped left-to-right from part
number callout when looking at the receptacle interface.
DIMENSIONS
ABODY LENGTH PER TABLECALCULATION (SEE PAGE 6)MINUS 0.570
B "A" PLUS 0.250
C "A" PLUS 0.750
STAGGERED LEADS
RUGGED V-SMT
INSULATOR A = SIGNAL CONTACTSCONNECTOR MATING FACE (PLUG)
PC BOARD LAYOUTCOMPONENT SIDE
PLUG, RIGHT SIDE KEYINSULATOR A = SIGNAL CONTACTS
SIGNAL CONTACT NUMBERING
SIG10 SIG20 SIG30 SIG40 SIG50
Sx 5 10 15 20 25
Sy 6 11 16 21 26
Sz 10 20 30 40 50
INSULATOR A = MODULE CONTACTSCONNECTOR MATING FACE (PLUG)
RIGHT SIDE KEY
LEFT SIDE KEY
3 MODULES + SIGNAL SHOWN
TURNING HARDWARE
PC BOARD LAYOUTCOMPONENT SIDE
PLUG, LEFT SIDE KEYINSULATOR A = MODULE CONTACTS
3 MODULES + SIGNAL SHOWN
1. For Module leads exiting the MAJOR SIDE, leads M3 and M4NOTES:
are .080" longer than M1 and M2.2. For Module leads exiting the MINOR SIDE, leads M1 and M2
are .080" longer than M3 and M4.3. PCB traces or IC programming will be required to compensate
for lead length variation.
DIMENSIONS
ABODY LENGTH PER TABLECALCULATION (SEE PAGE 6)MINUS 0.570
B "A" PLUS 0.250
C "A" PLUS 0.750
SINGLE-SIDED LEADS
SIGNAL CONTACT NUMBERING
SIG10 SIG20 SIG30 SIG40 SIG50
Sx 5 10 15 20 25
Sy 6 11 16 21 26
Sz 10 20 30 40 50
PART NUMBER = LEFT SIDE KEY
CONNECTOR MATING FACE (RECEPTACLE)INSULATOR A = MODULE CONTACTS
PC BOARD LAYOUTCOMPONENT SIDE
RECEPTACLE, LEFT SIDE KEYINSULATOR A = MODULE CONTACTS
3 MODULES + SIGNAL SHOWN
TURNING HARDWARERUGGED V-SMT
PART NUMBER = RIGHT SIDE KEY
CONNECTOR MATING FACE (RECEPTACLE)INSULATOR A = SIGNAL CONTACTS
PC BOARD LAYOUTCOMPONENT SIDE
RECEPTACLE, RIGHT SIDE KEYINSULATOR A = SIGNAL CONTACTS
3 MODULES + SIGNAL SHOWN
1. For module leads exiting the MAJOR SIDE, leads M3 and M4NOTES:
are .080" longer than M1 and M2.2. For module leads exiting the MINOR SIDE, leads M1 and M2
are .080" longer than M3 and M4.3. PCB traces or IC programming will be required to compensate
for lead length variation.4. Receptacle interface key is swapped left-to-right from part
number callout when looking at the receptacle interface.
SINGLE-SIDED LEADS
DIMENSIONS
ABODY LENGTH PER TABLECALCULATION (SEE PAGE 6)MINUS 0.570
B "A" PLUS 0.250
C "A" PLUS 0.750
HIGH SPEED CONNECTOR - WIRE CODES
1 100 OHM 24 AWG QUADRAX2 100 OHM 26 AWG QUADRAX3 100 OHM 28 AWG QUADRAX4 100 OHM 30 AWG QUADRAX5 110 OHM 24 AWG QUADRAX6 110 OHM 26 AWG QUADRAX7 110 OHM 28 AWG QUADRAX8 110 OHM 30 AWG QUADRAX
HIGH SPEED CONNECTOR - SIGNAL WIRE CODES
A SAE AS22759/11-24 TEN REPEATING COLORS PER M83513B SAE AS22759/11-24 NON-REPEATING COLORS PER MIL-STD-681C SAE AS22759/11-24 WHITED SAE AS22759/11-26 TEN REPEATING COLORS PER M83513E SAE AS22759/11-26 NON-REPEATING COLORS PER MIL-STD-681F SAE AS22759/11-26 WHITEG SAE AS22759/11-28 TEN REPEATING COLORS PER M83513H SAE AS22759/11-28 WHITEJ SAE AS22759/33-24*** TEN REPEATING COLORS PER M83513K SAE AS22759/33-24*** WHITEL SAE AS22759/33-26*** TEN REPEATING COLORS PER M83513M SAE AS22759/33-26*** WHITEN SAE AS22759/33-28*** TEN REPEATING COLORS PER M83513P SAE AS22759/33-28*** WHITEQ SAE AS22759/33-30*** TEN REPEATING COLORS PER M83513R SAE AS22759/33-30*** WHITES NEMA HP3-EXBEB 24 AWG NON-REPEATING COLORS PER MIL-STD-681T NEMA HP3-EXBEB 24 AWG WHITEU NEMA HP3-EXBDB 26 AWG NON-REPEATING COLORS PER MIL-STD-681V NEMA HP3-EXBDB 26 AWG WHITEW NEMA HP3-EXBCB 28 AWG NON-REPEATING COLORS PER MIL-STD-681X NEMA HP3-EXBCB 28 AWG WHITEY NEMA HP3-EXBBB 30 AWG TEN REPEATING COLORS PER M83513Z NEMA HP3-EXBBB 30 AWG WHITE
Corrosion has been experienced on connectors that are pre-wired with M22759/33 and stored in sealed environments.Caution in packaging and storage should be excercised when using this wire.
*** =
1. Additional High Speed Cable types are available as standard options (ie. Drain wire,TwinAx, Shielded Pairs, Shielded Pair Quad,
2. Additional wire types are available as standard options (ie. Twisted Pair, Shielded, Braid, etc.)
Wire Codes - High-Speed
NOTES:
QUADRAX CABLE CONSTRUCTIONCONDUCTORS - SILVER PLATED COPPER ALLOYINSULATION - FEPCABLE - PLANETARY TWIST WITH
FILLER IN COREBINDER - PTFE TAPEINNER SHIELD - ALUMINIZED MYLAR FACING OUTOUTER SHIELD - BRAIDED SILVER PLATED COPPER
95% MINIMUM COVERAGEMARKER TAPE - POLYIMIDE TAPEJACKET - TRANSLUCENT FEP
DIFFERENTIALPAIRS - PAIR 1 - BLUE (POS M1) - WHITE (POS M3)
PAIR 2 - ORANGE (POS M2) - GREEN (POS M4)
TEMPERATURE - -55°C TO +125°C
DIFFERENTIALIMPEDANCE - 100 ± 10
110 ± 6DELAY SKEWWITHIN PAIR - 4.0 ps/ft MAX
Twisted Pair Quad, etc). Contact Airborn for construction specifications of alternate cable.
Wire Codes - Signal
= Option not RoHS compliant.
Example:MMHS-03L2-12D-197-2J11MKHS-03R2-200-275-2N11
Select the appropriate two digit number above and include as the last two digits of the hardware code in the part number.(Keying hardware is factory installed and non-removable).
NOTES:NOTES:NOTES:NOTES:NOTES:
PUBLISH DATE: JULY 2010CATALOG CODE: HS_M100
PRINTED IN U.S.A.©2010 AIRBORN, INC.
LOCATIONSAirBorn, Inc.4321 AirBorn DriveAddison, Texas 75001U.S.A.972 931 3200
AirBorn International, LTD.1 Crockham ParkEdenbridge, Kent TN8 6SRUnited Kingdom+44 1732 865555