HIGH QUALITY PRODUCTS FOR WELDING AND · PDF filePRODUCTS RANGE. NICKEL ALLOYS. ALLOY NAME PROCESS AWS. 625 Daiko SF 625 Daiko 112 Daiko FCW 625P Daiko Strip 625 Mig - Tig - Saw Smaw

HIGH QUALITY PRODUCTSFOR WELDING AND CLADDING

DAIKO WELDING CONSUMABLES

It has always been Nicros’ policy to select the largest and most qualified world producers of special alloys creating a solid partnership with them. This choice has allowed to develop, through strict and rigorous testing, a wide range of welding and cladding consumables under DAIKO brand: covered electrodes, solid wires and flux cored wires, strips and fluxes . In this large range of products, particular attention is paid to Corrosion Resistant Alloys (CRA) and, especially, nickel alloys whereof our Top Product Daiko SF 625 is the absolute protagonist. Another strength of the company is the large stock that ensures customers fast delivery of supplies. Nicros is today a reliable and punctual partner, qualified by major and prestigious customers worldwide in: oil & gas, chemical and petrochemical, pressure vessels, valves, and generally wherever reliable and high quality consumable products are required.

DATA SHEET DAIKO SF 625 ERNiCrMo-3

Available in: Mig - Tig - Saw

Specifications: AWS A5.14 DIN 1736 EN ISO 18274 ER NiCrMo-3 SG-NiCr21 Mo9Nb Ni6625 (2.4831)

Approvals: TÜV (Mig-Tig), CE

Applications: Daiko SF 625 is designed to match the composition and properties of 625. This alloy is used for the high temperature strength and structural stability and is also used for its resistance to general corrosion, pitting, crevice and stress corrosion cracking in severe chloride media.Useful proprieties from -269°C to above 1000°C are achieved.It is used for welding of alloy 625, alloy 825, alloy 25-6MO, and a range of high alloy austenitic and super austenitic stainless steels. It is also used for surfacing of steel, for welding 9% Ni steels, and for welding various corrosion-resistant alloys such as alloy 20.Applications include furnace equipment, petrochemical and power generation plants and also overlays on pumps, valves and shafts in offshore and marine environments where high pitting resistance (PRE = 50) is essential. Widely used in oil & gas production and process.

Typical composition %

C Mn Si S P Cr Ni Mo Nb+Ta Cu Al Ti Fe

0.02 0.02 0.10 0.005 0.005 22.0 65.0 9.0 3.50 0.05 0.20 0.20 <0.3

TYPICAL PROPERTIES tensile strength 750 N/mm2“AS WELDED” 0,2% proof stress 500 N/mm2 elongation on 4D. 38% impact energy at -196°C = 80J PRE 50 hardness “as welded” 250 HV hard drawn hardness 450 HV

Shielding gas: TIG: pure argon with back protection MIG: pure argon or mixture Ar + 25-50% He

Complementary products:Smaw Electrode: Daiko 112 AWS A5.11 ENiCrMo-3Flux Cored Wire: Daiko FCW 625P AWS A5.34 ENiCrMo3T1-4 Strip: Daiko Strip 625 AWS A5.14 EQNiCrMo-3SAW Flux: Daiko Flux 982 - Daiko Flux NI600ESW Flux: Daiko Flux EHS 625

Packaging:MIG BS300 RANGE Ø 0,80 ÷ 1,60 mm Kg 15-18SAW K415 RANGE Ø 2,00 ÷ 4,00 mm Kg 25ROD CARTON BOX RANGE Ø 1,20 ÷ 4,00 mm Kg 5-10TOURET DIN760 RANGE Ø 1,00 ÷ 2,40 mm Kg 150-250DRUM RANGE Ø 1,20 ÷ 1,60 mm Kg 150-250

Other packaging available upon request.

The hightest performance of our DAIKO SF 625, reached in many years of experience all around the world, are the best guarantees of a top quality product.We ensure:- analysis conforming to AwsA5.14, ERNiCrMo-3- every batch made with strictly controlled chemical composition- Fe content 0,3% max- high quality weldability for all batchesDaiko 625 is approved by the biggest worldwide users of 625 alloys, particularly where robot welding system applications are needed.

NICKEL ALLOY DAIKO SF 625NICROS MOST FAMOUS WIRE

PRODUCTS RANGE

NICKEL ALLOYS

ALLOY NAME PROCESS AWS625 Daiko SF 625

Daiko 112Daiko FCW 625PDaiko Strip 625

Mig - Tig - SawSmawFCAWStrip

A5.14 - ERNiCrMo-3A5.11 - ENiCrMo-3A5.34 - ENiCrMo3T1-4A5.14 - EQNiCrMo-3

82 Daiko SF 82Daiko 182Daiko FCW 82Daiko Strip 82

Mig - Tig - SawSmawFCAWSTRIP

A5.14 - ERNiCr-3A5.11 - ENiCrFe-3A5.34 - ENiCr3T0-4A5.14 - EQNiCr-3

C276 Daiko SF 276Daiko C276Daiko FCW C276Daiko Strip C276

Mig - Tig - SawSmawFCAWStrip

A5.14 - ERNiCrMo-4A5.11 - ENiCrMo-4A5.34 - ENiCrMo4T0-4A5.14 - EQNiCrMo-4

C22 Daiko SF 622Daiko 122

Mig - Tig - SawSmaw

A5.14 - ERNiCrMo-10A5.11 - ENiCrMo-10

16Mo Daiko SF 16Mo Mig - Tig - Saw A5.14 - (ERNiCrMo-13)

59 Daiko SF 59Daiko 59KDaiko Strip 59

Mig - Tig - SawSmawStrip

A5.14 - ERNiCrMo-13A5.11 - ENiCrMo-13A5.14 - EQNiCrMo-13

686 Daiko 686Daiko 686kDaiko Strip 686


A5.14 - ERNiCrMo-14A5.11 - ENiCrMo-14A5.14 - EQNiCrMo-14

825 Daiko SF 825Daiko 135Daiko Strip 825

Mig - TigSmawStrip

A5.14 - ERNiFeCr-1A5.4 - (E383-15)A5.14 - EQNiFeCr-1

Weld-A Daiko Weld A Smaw A5.11 - ENiCrFe-2

617 Daiko SF 617Daiko 117

Mig - Tig - SawSmaw

A5.14 - ERNiCrCoMo-1A5.11 - ENiCrCoMo-1

718 Daiko SF 718 Mig -Tig A5.14 - ERNiFeCr-2

Pure Nickel Daiko 208Daiko 141Daiko Strip 208

Mig - TigSmawStrip

A5.14 - ERNi-1A5.11 - ENi-1A5.14 - EQNi-1

Monel 400 Daiko SF 418Daiko 190Daiko Strip 418


A5.14 - ERNiCu-7A5.11 - ENiCu-7A5.14 - EQNiCu-7

CuNi 70-30 Daiko 413Daiko 187Daiko Strip 413


A5.7 - ERCuNiA5.6 - ECuNiA5.7 - EQCuNi

CuNi 90-10 Daiko 412 Mig - Tig - Saw DIN 1733 - SG-CuNi10Fe

690 Daiko SF 652Daiko 152

Mig - Tig - SawSmaw

A5.14 - ERNiCrFe-7A5.11 - ENiCrFe-7

52M Daiko SF 652MDaiko Strip 652M

Mig - Tig - SawStrip

A5.14 - ERNiCrFe-7AA5.14 - EQNiCrFe-7A

92 Daiko 92 Mig - Tig A5.14 - ERNiCrFe-6

601 Daiko 601 Mig - Tig A5.14 - ERNiCrFe-11

B2 Daiko B2Daiko B2

TigSmaw

A5.14 - ERNiMo-7A5.14 - ENiMo-7

36 INV Daiko 36 INV Mig - Tig - Saw NO AWS

657 Daiko 657 Mig - Tig A5.14 - ERNiCr-4

657M Daiko 657M Mig - Tig A5.14 - ERNiCr-7

DUPLEX - SUPERDUPLEX - SUPERAUSTENITIC STEELSALLOY NAME PROCESS AWS2209 Daiko SF 2209

G-Tech 2209-15G-Tech 2209-16G-Tech 2209-17Daiko MCW 2209Daiko FCW 2209PDaiko FCW 2209Daiko Strip 2209

Mig - Tig - SawSmawSmawSmawFCAWFCAWFCAWStrip

A5.9 - ER2209A5.4 - E2209-15A5.4 - E2209-16A5.4 - E2209-17A5.22 - EC2209A5.22 - E2209T1-1/4A5.22 - E2209T0-1/4A5.9 - EQ2209

2594 Daiko SF 2594G-Tech 2594-15G-Tech 2594-16Daiko FCW 2594PDaiko FCW 2594Daiko Strip 2594

Mig - Tig - SawSmawSmawFCAWFCAWStrip

A5.9 - ER2594A5.4 - E2594-15A5.4 - E2594-16A5.22 - E2594T1-4A5.22 - E2594T0-4A5.9 - EQ2594

2595 Daiko SF 2594CuG-Tech 2595-15Daiko FCW 2595P

Mig - Tig - SawSmawFCAW

A5.9 - ER2594A5.4 - E2595-15A5.22 - E2594T1-4

2553 Daiko SF 2553G-Tech 2553Daiko FCW 2553


A5.9 - ER2553A5.4 - E2553-16A5.22 - E2553T0-4

2304 Daiko 2304G-Tech 2304-16Daiko FCW 2304P


A5.9 - NO AWSA5.4 - NO AWSA5.22 - NO AWS

320LR Daiko 320LRG-Tech 320LR

Mig - TigSmaw

A5.9 - ER320LRA5.4 - E320LR-15

904L Daiko 385G-Tech 385-15G-Tech 385-16Daiko FCW 385Daiko Strip 385

Mig - Tig - SawSmawSmawFCAWStrip

A5.9 - ER385A5.4 - E385-15A5.4 - E385-16A5.22 - NO AWSA5.9 - EQ385

310L G-Tech 310L Smaw A5.4 - NO AWS

310MnMo G-Tech MnMo Smaw A5.4 - NO AWS

FERRITIC - MARTENSITIC STAINLESS STEELSALLOY NAME PROCESS AWS409Nb Daiko SF 409Nb Mig - Tig - Saw A5.9 - ER409Nb

410 Daiko 410G-Tech 410-15G-Tech 410-26

Mig - Tig - SawSmawSmaw

A5.9 - ER410A5.4 - (E410-15)A5.4 - E410-26

410NiMo Daiko SF 410NiMoG-Tech 410NiMo-25G-Tech 410NiMo-26G-Tech 410NiMo-16Daiko MCW 410NiMo

Mig - Tig - SawSmawSmawSmawFCAW

A5.9 - ER410NiMoA5.4 - E410NiMo-25A5.4 - E410NiMo-26A5.4 - E410NiMo-16A5.22 - EC410NiMo

420 Daiko 420 Mig - Saw A5.9 - ER420

430 Daiko 430Daiko FWC 430Daiko Strip 430

Mig - Tig - SawFCAWStrip

A5.9 - ER430A5.22 - No AWSA5.9 - EQ430

430LNb Daiko SF 430LNb Mig - Tig - Saw A5.9 - (ER430)

430Ti Daiko SF 430Ti Mig - Tig A5.9 - (ER430)

630 Daiko 630G-Tech 630-16G-Tech 17.4Daiko MCW 630

Mig - Tig - SawSmawSmawFCAW

A5.9 - ER630A5.4 - E630-16A5.4 - (E630-26)A5.22 - No AWS

4122 Daiko 650NI Mig - Tig - Saw A5.9 - No AWS

AUSTENITIC STAINLESS STEELSALLOY NAME PROCESS AWS308L Daiko SF 308L

Daiko SF 308LSiG-Tech 308L-15G-Tech 308L-16G-Tech 308L-17Daiko FCW 308LPDaiko FCW 308LDaiko Strip 308L

Mig - SawMig - TigSmawSmawSmawFCAWFCAWStrip

A5.9 - ER308LA5.9 - ER308LSiA5.4 - E308L-15A5.4 - E308L-16A5.4 - E308L-17A5.22 - E308LT1-1/4A5.22 - E308LT0-1/4A5.9 - EQ308L

308LCF Daiko 308LCFG-Tech 308LCF-15G-Tech 308LCF-16Daiko FCW 308LCF

Tig - SawSmawSmawFCAW

A5.9 - ER308LA5.4 - E308L-15A5.4 - E308L-16A5.22 - E308LT1-1/4J

308H Daiko 308HG-Tech 308H-15G-Tech 308H-16Daiko FCW 308HPDaiko FCW 308H

Mig - Tig - SawSmawSmawFCAWFCAW

A5.9 - ER308HA5.4 - E308H-15A5.4 - E308H-16A5.22 - E308HT1-1/4A5.22 - E308HT0-1/4

316L Daiko SF 316LDaiko SF 316LSiG-Tech 316L-15G-Tech 316L-16G-Tech 316L-17Daiko FCW 316LPDaiko FCW 316LDaiko Strip 316L

Tig - SawMig - TigSmawSmawSmawFCAWFCAWStrip


316LCF Daiko 316LCFG-Tech 316LCF-15G-Tech 316LCF-16Daiko FCW 316LCF


A5.9 - ER316LA5.4 - E316L-15A5.4 - E316L-16A5.22 - E316LT1-1/4

316NF Daiko 316MnNFG-Tech 316LMn-15G-Tech 316LMn-16Daiko FCW 316NF


A5.9 - ER316LMnA5.4 - (E316LMn-15)A5.4 - (E316LMn-16)A5.22 - (E316LT0-4)

316H Daiko 316HG-Tech 316H-16

Mig - Tig - SawSmaw

A5.9 - ER316HA5.4 - E316H-16

16.8.2 Daiko 16.8.2G-Tech 16.8.2-15G-Tech 16.8.2-17Daiko FCW 16.8.2PDaiko FCW 16.8.2

Tig - SawSmawSmawFCAWFCAW

A5.9 - ER16.8.2A5.4 - E16.8.2-15A5.4 - E16.8.2-17A5.22 - (E16.8.2T1-1/4)A5.22 - (E16.8.2T0-1/4)

317L Daiko SF 317LG-Tech 317L-16Daiko FCW 317PDaiko FCW 317Daiko Strip 317L

Mig - Tig - SawSmawFCAWFCAWStrip

A5.9 - ER317LA5.4 - E317L-16A5.22 - E317LT1-1/4A5.22 - E317LT0-1/4A5.9 - EQ317L

318 Daiko 318Daiko 318SiG-Tech 318Daiko FCW 318P

Mig - Tig - SawMig - Tig - SawSmawFCAW

A5.9 - ER318A5.9 - (ER318)A5.4 - E318-17A5.22 NO AWS

347 Daiko SF 347Daiko SF 347SiG-Tech 347-15G-Tech 347-16Daiko FCW 347Daiko Strip 347

Mig - Tig - SawMig - TigSmawSmawFCAWStrip

A5.9 - ER347A5.9 - ER347SiA5.4 - E347-15A5.4 - E347-16A5.22 - E347T0-1/4A5.9 - EQ347

347H Daiko SF 347HG-Tech 347H-15G-Tech 347H-16Daiko FCW 347HP


A5.9 - ER347A5.4 - E347-15A5.4 - E347-16A5.22 - E347T1-1/4

309L Daiko SF 309LDaiko SF 309LSiG-Tech 309L-15G-Tech 309L-16G-Tech 309L-17Daiko FCW 309LPDaiko FCW 309LDaiko Strip 309L

Mig - Tig - SawMig - TigSmawSmawSmawFCAWFCAWStrip


309LMo Daiko SF 309LMoG-Tech 309LMo-15G-Tech 309LMo-17Daiko FCW 309LMoPDaiko FCW 309LMoDaiko Strip 309LMo

Mig - Tig - SawSmawSmawFCAWFCAWStrip

A5.9 - (ER309LMo)A5.4 - E309LMo-15A5.4 - E309LMo-17A5.22 - E309LMoT1-1/4A5.22 - E309LMoT0-1/4A5.9 - (EQ309LMo)

309LNb G-Tech 309NbDaiko Strip 309LNb

SmawStrip

A5.4 - E309Cb-16A5.9 - EQ309LNb

307 Daiko 307SiG-Tech 307-15G-Tech 307-16Daiko FCW 307


A5.9 - (ER307)A5.4 - E307-15A5.4 - E307-17A5.22 - (E307T0-1/4)

310 Daiko SF 310Daiko SF 310MnG-Tech 310MnG-Tech 25-20Daiko FCW 310Daiko Strip 310LMo

Mig - Tig - SawMig - TigSmawSmawFCAWStrip

A5.9 - ER310A5.9 - (ER310)A5.4 - (E310-15)A5.4 - (E310-16)A5.22 - E310T0-1/4A5.9 - (EQ310)

312 Daiko SF 312G-Tech 312Daiko FCW 312


A5.9 - ER312A5.4 - E312-17A5.22 - E312T0-4

COPPER ALLOYSALLOY NAME PROCESS AWSCu Daiko CuSn

G-Tech CuSnMig - TigSmaw

A5.7 - ERCuA5.6 - ECu

CuSi Daiko CuSi3 Mig - Tig A5.7 - ERCuSi-A

CuAg Daiko CuAg Mig - Tig DIN 1733 - SG-CuAg

CuSn Daiko CuSn6G-Tech CuSn6Daiko CuSn12

Mig - TigSmawMig - Tig

A5.7 - ERCuSn-AA5.6 - ECuSn-ADIN 1733 - SG-CuSn12

CuAl Daiko CuAl8G-Tech CuAl8Daiko CuAl9FeG-Tech CuAl9Fe

Mig - Tig - SawSmawMig - Tig - SawSmaw

A5.7 - ERCuAl-A1A5.6 - ECuAl-8A5.7 - ERCuAl-A2A5.6 - ECuAl-9

CuAlNi Daiko CuAl8Ni2Daiko CuAl8Ni6G-Tech CuAl8Ni6

Mig - TigMig - TigSmaw

DIN 1733 - SG-CuAl8Ni2A5.7 - ERCuNiAlA5.6 - (ECuMnNiAl)

CuMnAl Daiko CuMn13AlG-Tech CuMn13Al

Mig - TigSmaw

A5.7 - ERCuMnNiAlA5.6 - (ECuMnNiAl)

CuNi 70-30 Daiko 413Daiko 187Daiko Strip 413


A5.7 - ERCuNiA5.6 - ECuNiA5.7 - EQCuNi

CuNi 90-10 Daiko 412 Mig - Tig - Saw DIN 1733 - SG-CuNi10Fe

CRYOGENIC STEELSALLOY NAME PROCESS AWS1Ni Daiko 1Ni

Daiko Saw 1NiG-Tech 1NiDaiko FCW 1NiBDaiko FCW 1NiRDaiko MCW 1Ni

Mig - TigSawSmawFCAWFCAWFCAW

A5.28 - ER80S-Ni1A5.23 - ENi1A5.5 - E8018-C3A5.29 - E81T5-Ni1A5.29 - E81T1-Ni1A5.28 - E80C-Ni1

2Ni Daiko 2NiDaiko Saw 2NiG-Tech 2NiDaiko FCW 2NiBDaiko FCW 2NiR

Mig - TigSawSmawFCAWFCAW

A5.28 - ER80S-Ni2A5.23 - ENi2A5.5 - E8018-C1A5.29 - E81T5-Ni2A5.29 - E81T1-Ni2

3Ni Daiko Saw 3NiG-Tech 3Ni

SawSmaw

A5.23 - ENi3A5.5 - E8018-C2

CREEP RESISTING STEELSALLOY NAME PROCESS AWS0.5Mo Daiko Mo.B

Daiko Saw Mo.BG-Tech Mo.BDaiko FCW Mo.BDaiko MCW Mo.B

Mig - TigSawSmawFCAWFCAW

A5.28 - ER70S-A1A5.23 - EA2A5.5 - E7018-A1A5.29 - E81T5-A1A5.28 - E80C-G

1¼Cr ½Mo Daiko 1CrMoDaiko 1CrMoSDaiko Saw 1CrMoG-Tech 1CrMoG-Tech 1CrMoLDaiko FCW 1CrMoBDaiko FCW 1CrMoR

Mig - Tig Mig - TigSawSmawSmawFCAWFCAW

A5.28 - ER80S-B2A5.28 - ER80S-GA5.23 - EB2A5.5 - E8018-B2A5.5 - E7015-B2LA5.29 - E81T5-B2A5.29 - E81T1-B2

CrMoV G-Tech 1CrMoVDaiko FCW 1CrMoV

SmawFCAW

A5.5 - E9018-GA5.36 - E91T1-C1(M21)PZ-G

2¼Cr 1Mo Daiko 2CrMoDaiko 2CrMoSDaiko Saw 2CrMoG-Tech 2CrMoG-Tech 2CrMoLDaiko FCW 2CrMoDaiko FCW 2CrMoL

Mig - TigMig - TigSawSmawSmawFCAWFCAW

A5.28 - ER90S-B3A5.28 - ER90S-GA5.23 - EB3A5.5 - E9018-B3A5.5 - E8015-B3LA5.29 - E91T5-B3A5.29 - E91T1-B3

5CrMo Daiko 5CrMoDaiko Saw 5CrMoG-Tech 5CrMoDaiko FCW 5CrMo

Mig - TigSawSMAWFCAW

A5.28 - ER80S-B6A5.23 - EB6A5.5 - E8015-B6 / E8016-B6A5.29 - E81T1-B6 / B8

9CrMo Daiko 9CrMoDaiko Saw 9CrMoG-Tech 9CrMoDaiko FCW 9CrMo

Mig - TigSawSmawFCAW

A5.28 - ER80S-B8A5.23 - EB8A5.5 - E8015-B8A5.29 - E81T1-B8

9CrMoV Daiko 9CrMoVDaiko Saw 9CrMoVG-Tech 9CrMoVDaiko FCW 9CrMoVDaiko MCW 9CrMoV

TigSawSmawFCAWFCAW

A5.28 - ER90S-B9A5.23 - EB9A5.5 - E9015-B9A5.29 - E91T1-B9A5.28 - E90C-B9

10CrMoW G-Tech 10CrMoWDaiko FCW 10CrMoW

SmawFCAW

A5.5 - No AWSA5.29 - No AWS

9CrWV Daiko 9CrWVDaiko Saw 9CrWVG-Tech 9CrWVDaiko FCW 9CrWV

TigSawSmawFCAW

A5.28 - ER90S-GA5.23 - EGA5.5 - E9015-GA5.29 - E91T1-G

12CrMoV Daiko 12CrMoVG-Tech 12CrMoV

TigSmaw


ALLUMINIUM ALLOYSALLOY NAME PROCESS STANDARDAl Daiko Al 99,5

G-Tech Al 99,5Daiko Al 99,8G-Tech Al 99,8

Mig - TigSmawMig - TigSmaw

DIN 1732 - SG-Al 99,5DIN 1732 - EL-Al 99,5DIN 1732 - SG-Al 99,8DIN 1732 - EL-Al 99,8

AlSi5 Daiko AlSi5G-Tech AlSi5

Mig - TigSmaw

DIN 1732 - SG-AlSi5DIN 1732 - EL-AlSi5

AlSi12 Daiko AlSi12G-Tech AlSi12

Mig - TigSmaw

DIN 1732 - SG-AlSi12DIN 1732 - EL-AlSi12

AlMg4,5Mn Daiko AlMg4,5Mn Mig - Tig DIN 1732 - SG-AlMg4,5Mn

AlMg5 Daiko AlMg5 Mig - Tig DIN 1732 - SG-AlMg5

AlMg5Mn Daiko AlMg5Mn Mig - Tig DIN 1732 - No Standard

AlMg3 Daiko AlMg3 Mig - Tig DIN 1732 - SG-AlMg3

HIGH STRENGTH STEELSALLOY NAME PROCESS AWSMnMo Daiko D2

Daiko Saw MnMoG-Tech 9018-D1G-Tech 10018-D2Daiko FCW MnMoDaiko MCW MnMo

Mig - TigSawSmawSmawFCAWFCAW

A5.28 - ER80S-D2 / ER90S-D2A5.23 - EA3A5.5 - E9018-D1A5.5 - E10018-D2A5.29 - E81T5-A1A5.28 - E80C-G

NiMo Daiko NiMoDaiko Saw S3NiMoG-Tech 1NiMoG-Tech 3NiMoDaiko MCW NiMoDaiko MCW 2NiMo

Mig - TigSawSmawSmawFCAWFCAW

A5.28 - ER100S-GA5.23 - EGA5.5 - E9016-GA5.5 - E12016-GA5.28 - E90C-GA5.28 - E110C-K3

NiCrMo Daiko 96Daiko Saw S3NiMoDaiko FCW 96Daiko MCW 96

Mig - TigSawFCAWFCAW

A5.28 - ER110S-GA5.23 - EGA5.29 - E121T5-K4A5.28 - E120C-K4

COBALT ALLOYSALLOY NAME PROCESS AWSGr. 6 Daiko 1006LC

Daiko 1006Daiko 1006G-Tech 1006

FCAWFCAWTigSmaw

A5.21 - ERCCoCr-AA5.21 - ERCCoCr-AA5.21 - ERCoCr-AA5.13 - ECoCr-A

Gr. 12 Daiko 1008Daiko 1008G-Tech 1008

FCAWTigSmaw

A5.21 - ERCCoCr-BA5.21 - ERCoCr-BA5.13 - ECoCr-B


FCAWTigSmaw

A5.21 - ERCCoCr-CA5.21 - ERCoCr-CA5.13 - ECoCr-C


FCAWTigSmaw

A5.21 - ERCCoCr-EA5.21 - ERCoCr-EA5.13 - ECoCr-E

Gr. 25 Daiko 1025G-Tech 1025

TigSmaw

EN14700 - T Z Co (L 605)EN14700 - E Z Co1 (L 605)

Gr. 50 Daiko 1050 FCAW A5.21 - ERNiCr-B (UMCO 50)

Other grades upon request

CAST IRONALLOY NAME PROCESS AWSGr. 99 Daiko 99

G-Tech 99Mig TigSmaw electrode

A5.15 - ERNi-CIA5.15 - ENi-CI

Gr. 55 Daiko 55G-Tech 55Daiko FCW 55

Mig TigSmaw electrodeFCAW

A5.15 - No AWSA5.15 - ENIFE-CIEN 1071 - T C NiFe-2

Gr. 321 Daiko FCW 321 FCAW A5.15 - No AWS

Gr. 305 G-Tech 305Daiko FCW 305

Smaw electrodeFCAW

A5.15 - ENIFE-CIA5.15 - No AWS

Gr. 324 Daiko 324G-Tech 324Daiko FCW 324

SawSmaw electrode FCAW

A5.15 - ERNi-CIA5.15 - ENi-CIA5.15 - No AWS

Gr. 329 G-Tech 329 Smaw electrode A5.15 - ENiCu-B

Gr. 331 G-Tech 331Daiko FCW 331

Smaw electrodeFCAW


A COMPLETE ASSORTMENT OF SAW / ESW FLUXES SUITABLE FOR EVERY KINDOF ALLOYS IS ALSO INCLUDED IN DAIKO RANGE OF CONSUMABLES.

PRODUCTS RANGE INCLUDE OVER 300 DIFFERENT ALLOYS. PLEASE CONTACT US IN CASE THE ALLOY YOU ARE LOOKING FOR IS NOT PRESENTIN THIS CATALOGUE.

TITANIUM ALLOYSALLOY NAME PROCESS AWSGr. 1 Daiko Ti Gr. 1 Mig - Tig A5.16 - ERTi-1

Gr. 2 Daiko Ti Gr. 2 Mig - Tig A5.16 - ERTi-2




Nicros Authorised DistributorSpecial Metals Welding Products are the most complete range of nickel based welding consumables for joining nickel alloys, high performance steels, cast irons and dissimilar metals as well as overlaying on steel for corrosion or erosion protection. This consumables range is supported by over 100 years experience in nickel alloy technology. Product trademarks such as MONEL, INCO-WELD, NI-ROD, INCONEL, INCOLOY, NILO and INCOFLUX have earned worldwide recognition as the standard for quality and product performance.

NICROS

• 3 warehouses in Italy, 5000 square meters

• Over 1000 tons in stock for prompt deliveries

• UNI EN ISO 9001 quality system ICIM certificate nr.1245/3

• TuV certificate (nr. 0035-CPR-C908) for Factory Production Control system

• TuV approval of a qualified manufacturer of Welding Consumables pursuant to VdTuV 1153

• Technical assistance provided by qualified Welding Engineers I.W.E. nr.120085A + I.W.E. nr.10141

NICROS s.r.l.

Head office Warehouse WarehouseVia Tiepolo 26, Via Toscana 3A-3B, Via Aquileia 15, 3104831021 Mogliano Veneto (TV) 20056 Grezzago (MI) Olmi di San Biagio (TV)Tel. +39 041 597 01 66 Tel. +39 02 909 04 77 Tel. +39 0422 796 367

www.daikowelding.com - e-mail [email protected] - [email protected]

Documents

HIGH QUALITY PRODUCTS FOR WELDING AND · PDF filePRODUCTS RANGE. NICKEL ALLOYS. ALLOY NAME PROCESS AWS. 625 Daiko SF 625 Daiko 112 Daiko FCW 625P Daiko Strip 625 Mig - Tig - Saw Smaw