High Performance Hydraulic Cartridge Valves and Electro ...Cartridge valves in custom manifolds offer several advantages to the machine designer: • System manifolds “clean up”

© The entire content of this catalog is Copyright 2002 HydraForce, Inc. All rights reserved.HydraForce and the HydraForce logo are registered trademarks of HydraForce, Inc.

Register YourCatalog

Index byModel No.

AboutHydraForce

If you know the HydraForce Model Numberof the Valve you are interested in

How toContact Us

SystemManifolds

SolenoidValves

Electro-ProportionalValves

Coils & ElectronicControllers

DirectionalValves

Flow ControlValves

Pressure ControlValves

D03 SandwichValves

Housings& Accessories

TechnicalReference Info.

HYDRAFORCE®

Visit our Web Site: www.hydraforce.comFrom North America Call Toll Free: 1 800 682 6875

QS9000& ISO9001Registered

CD4.1MAR. 2002

High Performance Hydraulic Cartridge Valvesand Electro-Hydraulic Control Systems

http://www.hydraforce.com

HydraForce offers one of the most comprehensivelines of high quality hydraulic cartridge valves for themobile and industrial equipment markets. We aredesigning high performance valves to meet virtuallyany need encountered in machine design for flow ratesof .4 to 300 lpm (.1 to 80 gpm).

Innovative, Robust Design Our “group technology”approach to product planning, design, and manufac-turing allows us to use a few basic parts to createmany different models. Product availability isenhanced by this cost-effective engineering approach.

High Quality, Precision Manufacturing The key tohigh quality final products is in maintaining precisecontrol of those operations which produce the fits andclearances in critical valve subassemblies. State-of-the-art preparation and assembly equipment enablesus to meet critical tolerances for more efficienthydraulic circuits. Our equipment includes thefollowing:• Automated honing/bore-sizing equipment

to .00005 tolerances.• Automated parts cleaning and assembly equipment.

Industry-Interchangeable Cartridges & CavitiesOur products fit a variety of industry-common cavities,including:• Standard 10 and 16 sizes for 240 bar (3500 psi)

circuits.• Compact 08 size for cost-effectiveness in lower flow

rate, 3000 psi (207 bar) circuits.• The 5000 psi (345 bar) 58 size meets the increasing

need for higher pressure valve componentry.• Our 12 size is an economical alternative for 57 to

95 lpm (15 to 25 gpm) circuits at 240 bar (3500 psi).• Our new ISO/Metric 42 and 20 sizes meet higher

flow requirements.

The U.S. National Fluid Power Association (NFPA),working with the International Standards Organization(ISO), has proposed an industry standard set ofcavities: NFPA/T3.5.31M-19XX. HydraForce willmanufacture products to fit in these cavities, uponformal NFPA standardization and on OEM request.

Comprehensive Product Line HYDRAFORCE®

We utilize the most advancedequipment and processes formachining, assembly,and product testing.

FRONT PAGE OF CATALOG INDEX BY VALVE MODEL NUMBER

HydraForce is registered to QS 9000 and ISO 9001standards. We are one of only a handful of valvemanufacturers to have achieved this recognition for“Total Quality Management.”

• Statistical Process Control (SPC) of all critical in-house production processes.

• Complete in-house inspection and testing equip-ment.

• On-going supplier monitoring and certification to theQS 9000 standard.

• Quality audit of incoming raw parts to a defined Cpk

level.• Formalized continuous improvement on all

production and customer service processes.• Detailed procedure specifications for all processes

that affect product quality.• Rigid in-process material tracking with bar-code

identification and lot control.• Computerized gauge calibration/control including

R & R and capability studies.• 100% final product performance testing.• Complete coil test equipment.• Automated product testing using PLC’s.• Efficient JIT material handling procedures.• Thorough parts cleaning with detailed procedures to

meet most stringent industrial requirements.• Protective/preservation packaging standards for all

products.

Product Qualification HydraForce’s productqualification policy includes in-house life testing perNFPA standards. Generally, all HydraForce standardproducts are tested for at least “million cycle”capability. Other qualification testing can be doneto meet specific customer requirements.

Stringent Quality Control and Testing HYDRAFORCE®

International manufacturing,service, product design, andapplication assistance areavailable from our U.S. andU.K. locations.


Product Design & Application AssistanceHydraForce engineers have developed a reputationfor their innovative, high quality, yet cost-effectivevalve designs. When standard cataloged models donot meet your requirements, our engineers will designa valve package specifically for your application.Whether designing cataloged or custom assemblies,our Computer-Aided Design (CAD) system enhancesour ability to create innovative products.

Flexible Delivery Our sophisticated on-line softwaresystem gives us complete Material RequirementsPlanning (MRP) control over all scheduling andpurchasing functions. This enables us to meet Just InTime (JIT) and most other delivery requirements.

International Manufacturing & Service Together,HydraForce, Inc. (U.S.A.) and HydraForce Hydraulics,Ltd. (U.K.) are able to provide parts and serviceinternationally.

International Distribution Our worldwide networkof stocking distributors further assures our customersof product availability and technical assistanceinternationally.

HydraForce is aggressively pursuing the hydrauliccartridge valve and custom manifold markets. Sinceour founding in 1985, we have grown to become theworld’s leading supplier of these products.Our success is due to our commitment to innovationand quality in this challenging marketplace. Ourproducts consistently achieve the optimumcombination of quality, efficiency and economy.To find out more about how HydraForce can help youdesign and produce higher performance, lower costhydraulic circuits, contact us today.

FIVE-YEAR LIMITED WARRANTY

All HydraForce products carry a five-year limitedwarranty against defects in material andworkmanship.

FULL WARRANTY INFORMATION

Customer Service HYDRAFORCE®

The latest CAD and CAMtechnologies allow us toprovide our customers themost responsive service inthe marketplace.


High Performance Hydraulic Cartridge Valvesand Electro-Hydraulic Control Systems

From North America Call Toll Free: 1 800 682 6875

HYDRAFORCE INC500 Barclay Blvd.Lincolnshire, IL 60069 U.S.A.Phone: 847 793 2300Fax: 847 793 0086®

HYDRAFORCE HYDRAULICS LTDSt. Stephens StreetBirmingham B6 4RG England Phone: 0121 333 1800Fax: 0121 333 1810®

National

Association

MEMBER

FLUID POWER

BF The BritishFluid Power

AssociationIncorporating AHEM

MEMBER

PA

Visit Our Web Site at: www.hydraforce.com where you will find:

• The Latest Product Information, including Product Information in Different Languages.• Your Nearest HydraForce Distributor. • Employment and Supplier Opportunities.

Our recently expanded 130,000 square foot manufacturing and office facility is convenientlylocated just north of Chicago, Illinois (shown above). We will be pleased to demonstrate ouradvanced design, quality assurance and fabrication techniques at our U.S. facility or ournew 50,000 sq. ft. (4650 sq. meter) facility in Birmingham, England (shown below).

QS 9000 & ISO 9001Registered

Visit Our Facilities HYDRAFORCE®



Just print out this form, fill it out, and fax it to us

Please send a catalog to my colleague: Print CD

Name Title

Company Division

Street Address

City, State, Zip

Phone Fax

E-mail

I am most interested in:

Solenoid Valves Flow Controls Directional Valves

Pressure Controls System Manifolds Sandwich Valves

Proportional Valves Electronic Proportional Controllers

Valve Applications:

Name Title

Company Division

Street Address

City, State, Zip

Phone Fax

E-Mail

HYDRAFORCE, INC.Lincolnshire, IL USA

Fax: 1 847 793 0086

HYDRAFORCE HYDRAULICS, LTDBirmingham, England UK

Fax: 0121 333 1810

If you prefer, you can e-mail us the informationrequested on this page. Please use the words“Register Catalog” in the subject area of your e-mail.

E-mail to: [email protected]

From the Americas,Africa, Asia, Australia, New Zealand: From Europe:

If you prefer, you can e-mail us the informationrequested on this page. Please use the words“Register Catalog” in the subject area of your e-mail.

E-mail to: [email protected]

You can also register your catalog, or request catalogs from our web site at www.hydraforce.comJust click on the button labeled Catalog Req/Reg

Register Your Catalog HYDRAFORCE®

Please send me another copy of the catalog: Print CD



mailto:[email protected]

mailto:[email protected]

Cartridge valves in custom manifolds offer several advantages to the machine designer:• System manifolds “clean up” machine plumbing. They are designed to meet the needs of themachine, rather than the machine being designed to meet the needs of the fluid power system.Installation costs are usually dramatically reduced.

• Leaks are stopped. Manifolds with O-ring fitting ports eliminate external leakage, whichfrequently prohibited the use of hydraulics in many applications.

• Downtime and service of integrated circuit manifolds is reduced to seconds. Componentscan be changed without disturbing plumbing or unstacking tie rod-type hardware.

• Integrated hydraulic circuits can be centralized on a machine, or strategically scattered tooptimize plumbing logistics. There is no universally-right method for installation. Cartridgecircuits in custom manifolds offer unequalled flexibility.

HydraForce is both a supplier of custom integrated circuit manifolds and a supporter of ourDistributors and customers who design and fabricate their own manifolds.HydraForce System ManifoldsOur custom integrated manifolds are the highest quality in the world.• Manifold surfaces are fly-cut to assure squareness and exact sizing where precise locationcontrol is required.

• Every manifold supplied by HydraForce goes through a minimum of four cleaning anddeburring operations, including thermal-deburring.

• All aluminum manifolds are anodized for cleanliness, added surface hardening, and corrosionresistance. Steel manifolds are zinc plated.

• A customer/product-specific assembly control plan and an assembly drawing are prepared forevery manifold product.

• Every U.S. manifold is hydraulic function tested to a documented customer/product-specifictest procedure. Manifolds produced at our U.S. and U.K. facilities conform to the requirementsof ISO 9001 and QS 9000 Certified Standards.

• HydraForce will mount customer specified fittings or other components not of our manufactureon request where feasible.

System Manifolds HYDRAFORCE®

• Consolidate your hydrauliccontrol system.

• External connections areminimized.

• External leakage is virtuallyeliminated.

• Reduced installation time andsystem maintenance.

• 100% circuit logic and functiontested.

• New “FastTrak” service forquick delivery of a workingprototype block.


Support Services to Manifold MakersHydraForce is pleased to offer assistance to local integrated circuit designers andsuppliers.• HydraForce offers our AutoCad-based library at nominal cost to users of our hard-ware. The library includes product shapes, circuit symbols, cavities, ports, and manyother features which facilitate manifold design or service documentation. In addition,the library can be translated into other formats to be read into other CAD software.

• HydraForce Certification. Any manifold supplier may request an audit byHydraForce as a step to formal HydraForce Certification as a qualified producer.Candidates will be required to demonstrate standard procedures utilizing advancedquality planning concepts, SPC, gauge and equipment management systems,manifold assembly control plans, etc.

• Cavity Forming Tools. We inventory standard general-purpose tools which aresuitable for limited production of aluminum or steel blocks. High production carbide-tipped tools are available on special order. We offer these tools at nominal cost andare pleased to supply tool drawings on request at no cost.

• Manifold Accessory Hardware. We are pleased to provide our customers with avariety of associated hardware, commonly used in custom integrated manifolddesign, often difficult to obtain cost-effectively in lower quantities: Pressed-in plugs;SAE and NPTF plugs; Orifice discs; Cavity plugs; Screen cartridges.

System Manifolds HYDRAFORCE®

(continued)


Index by Valve Model Number HYDRAFORCE®

FRONT PAGE OF CATALOG

BV10-40. .............. 4.750.1–2

BV10-42. .............. 4.758.1–2

CR08-38. .............. 6.230.1–2

CR10-28. .............. 6.210.1–2

CRV08-20. ........... 6.250.1–2

CRV10-20. ........... 6.260.1–2

CRV08-22. ........... 6.270.1–2

CRV10-22. ........... 6.280.1–2

CV04-20. .............. 4.005.1–2

CV04-B20. ........... 4.005.1–2

CV08-20. .............. 4.010.1–2

CV08-21. .............. 4.018.1–2

CV10-20. .............. 4.011.1–2

CV10-21. .............. 4.019.1–2

CV10-23. .............. 4.034.1–2

CV10-24. .............. 4.040.1–2

CV10-28. .............. 4.050.1–2

CV12-20. .............. 4.013.1–2

CV12-21. .............. 4.020.1–2

CV12-28. .............. 4.051.1–2

CV16-20. .............. 4.014.1–2

CV42-M20. ........... 4.016.1–2

CV50-20. .............. 4.012.1–2

DC08-40. .............. 4.200.1–2

DCV08. ................. 4.250.1–2

DCV10. ................. 4.251.1–2

DCV12. ................. 4.252.1–2

EC10-30. .............. 5.452.1–2

EC10-S31. ............ 5.462.1–2

EC10-32. .............. 5.472.1–2

EC10-40. .............. 5.482.1–2

EC10-41. .............. 5.492.1–2

MODEL PAGE NO. MODEL PAGE NO. MODEL PAGE NO.

EC10-42. .............. 5.504.1–2

EC10-43. .............. 5.512.1–2

EC12-30. .............. 5.454.1–2

EC12-40. .............. 5.484.1–2

EC12-41. .............. 5.493.1–2

EC16-40. .............. 5.485.1–2

EC16-42. .............. 5.506.1–2

EC16-43. .............. 5.514.1–2

EC42-M40. ........... 5.486.1–2

EC42-M41. ........... 5.502.1–2

EC50-30. .............. 5.453.1–2

EC50-40. .............. 5.483.1–2

ECV10-44. ............ 5.522.1–2

EHPR08-33. ......... 2.970.1–4

EP10-S35. ............ 4.500.1–2

EP10-S38. ............ 4.510.1–2

EP12-S35. ............ 4.501.1–2

EP16-S35. ............ 4.502.1–2

EP20-S35. ............ 4.503.1–2

EP20-S38. ............ 4.513.1–2

ER10-S30. ............ 6.470.1–2

EV10-S34. ............ 4.520.1–2

EV12-S34. ............ 4.521.1–2

EV16-S34. ............ 4.522.1–2

EV20-S34. ............ 4.523.1–2

FC08-20F. ............ 5.200.1–2

FC10-20. .............. 5.201.1–2

FC10-21. .............. 5.212.1–2

FC12-20. .............. 5.202.1–2

FD10-40. .............. 5.602.1–2

FD10-41. .............. 5.612.1–2

FD10-42. .............. 5.622.1–2

FD10-44. .............. 5.628.1–2

FD10-45. .............. 5.632.1–2

FD12-40. .............. 5.603.1–2

FD12-41. .............. 5.613.1–2

FD12-45. .............. 5.634.1–2

FD16-40. .............. 5.604.1–2

FD16-42. .............. 5.626.1–2

FD16-44. .............. 5.630.1–2

FD16-45. .............. 5.636.1–2

FDC16. ................. 5.706.1–2

FR08-20F. ............ 5.300.1–2

FR08-30F. ............ 5.340.1–2

FR10-20F. ............ 5.301.1–2

FR10-30A. ............ 5.342.1–2

FR10-30F. ............ 5.343.1–2

FR10-32. .............. 5.362.1–2

FR10-32F. ............ 5.363.1–2

FR10-33. .............. 5.372.1–2

FR10-39. .............. 5.382.1–2

FR12-20F. ............ 5.302.1–2

FR12-23. .............. 5.334.1–2

FR12-30F. ............ 5.345.1–2

FR12-32. .............. 5.365.1–2

FR12-33. .............. 5.374.1–2

FR16-20F. ............ 5.303.1–2

HP10-20. .............. 8.550.1–2

HP10-21. .............. 8.555.1–2

HP16-21. .............. 8.560.1–2

HS10-42. .............. 4.300.1–2

HS50-42. .............. 4.300.1–2

HS52-42. .............. 4.301.1–2

HS52-43. .............. 4.302.1–2

NEW MODELS ARE HIGHLIGHTED


(continued)



KS10-30. .............. 6.802.1–2

KS10-31. .............. 6.812.1–2

LS04-B30. ............ 4.265.1–2

LS08-30. .............. 4.270.1–2

LS10-30. .............. 4.271.1–2

LS50-30. .............. 4.272.1–2

LSV1. ................... 4.260.1–2

MD10-40. ............. 4.640.1–2

MP08-20. .............. 4.610.1–2

MP08-30. .............. 4.620.1–2

MP08-34. .............. 4.625.1–2

MP08-40. .............. 4.630.1–2

MP08-41. .............. 4.645.1–2

MP10-20. .............. 4.611.1–2

MP10-22. .............. 4.615.1–2

MP10-40. .............. 4.631.1–2

MP10-41. .............. 4.646.1–2

MP10-42. .............. 4.652.1–2

MP10-43. .............. 4.658.1–2

MP10-47A. ........... 4.702.1–2

MP10-47B. ........... 4.712.1–2

MP10-47C. ........... 4.722.1–2

MP10-47D. ........... 4.732.1–2

MR10-20. ............. 5.013.1–2

MR10-31. ............. 4.774.1–2

MR10-37A. ........... 4.782.1–2

MR10-37B. ........... 4.792.1–2

MR10-40. ............. 4.802.1–2

MR10-41. ............. 4.812.1–2

MR10-43. ............. 4.832.1–2

MR10-47A. ........... 4.902.1–2

MR10-47B. ........... 4.912.1–2

MR10-47C. ........... 4.922.1–2

MR10-47D. ........... 4.932.1–2

MR10-47F. ........... 4.942.1–2

MR10-47G. ........... 4.952.1–2

MV08-22. .............. 4.600.1–2

NV08-20. .............. 5.010.1–2

NV08-21. .............. 5.030.1–2

NV10-20. .............. 5.012.1–2

NV10-21. .............. 5.032.1–2

NV10-22. .............. 5.042.1–2

NV12-20. .............. 5.014.1–2

PC08-30. .............. 4.100.1–2

PC10-30. .............. 4.101.1–2

PC10-32. .............. 4.109.1–2

PCV10. ................. 4.151.1–2

PCV12. ................. 4.152.1–2

PCV16. ................. 4.153.1–2

PD10-30. .............. 4.310.1–2

PD10-32. .............. 4.316.1–2

PD10-34. .............. 4.328.1–2

PD10-35. .............. 4.333.1–2

PD10-40. .............. 4.340.1–2

PD10-41. .............. 4.345.1–2

PD10-42. .............. 4.350.1–2

PD10-44. .............. 4.355.1–2

PD10-45. .............. 4.360.1–2

PD10-50. .............. 4.370.1–2

PD12-30. .............. 4.312.1–2

PD12-32. .............. 4.317.1–2

PD12-34. .............. 4.329.1–2

PD12-35. .............. 4.334.1–2

PD12-40. .............. 4.341.1–2

PD12-41. .............. 4.346.1–2

PD12-42. .............. 4.351.1–2

PD12-44. .............. 4.356.1–2

PD12-45. .............. 4.361.1–2

PD12-S50. ............ 4.371.1–2

PD16-40. .............. 4.342.1–2

PD16-41. .............. 4.347.1–2

PD16-42. .............. 4.352.1–2

PD16-44. .............. 4.357.1–2

PD16-45. .............. 4.362.1–2

PD16-S51. ............ 4.383.1–2

PD16-S61. ............ 4.393.1–2

PD42-M40. ........... 4.343.1–2

PD42-M41. ........... 4.348.1–2

PD42-M42. ........... 4.353.1–2

PD42-M45. ........... 4.363.1–2

PE16-S67C. ......... 4.420.1–2

PE16-S67D. ......... 4.421.1–2

PE16-S67H. ......... 4.430.1–2

PE16-S67K. ......... 4.431.1–2

PE42-S67C. ......... 4.443.1–2

PE42-S67H. ......... 4.448.1–2

PFR70-33x-E. ...... 2.401.1–2

PFR70-33x-F. ...... 2.402.1–2

PFR70-33x-J. ....... 2.403.1–2

PFR70-35x-E. ...... 2.433.1–2

PFR72-33x-J. ....... 2.407.1–2

PFR72-33x-L. ...... 2.408.1–2

PFR72-35x-L. ...... 2.435.1–2

PR08-32. .............. 6.410.1–2

PR10-31. .............. 6.400.1–2

PR10-32. .............. 6.420.1–2



(continued)



PR10-36. .............. 6.440.1–2

PR50-36. .............. 6.442.1–2

PS08-30. .............. 6.500.1–2

PS08-32. .............. 6.530.1–2

PS08-35. .............. 6.660.1–2

PS10-30. .............. 6.510.1–2

PS10-31. .............. 6.520.1–2

PS10-32. .............. 6.532.1–2

PS10-33. .............. 6.540.1–2

PS10-34. .............. 6.552.1–2

PS10-35. .............. 6.662.1–2

PS10-36. .............. 6.672.1–2

PS10-38. .............. 6.690.1–2

PS10-40. .............. 6.772.1–2

PS10-41. .............. 6.782.1–2

PS10-43. .............. 6.792.1–2

PS50-36. .............. 6.674.1–2

PS50-40. .............. 6.772.1–2

PV08-30. .............. 2.370.1–2

PV08-31. .............. 2.380.1–2

PV70-30. .............. 2.372.1–2

PV70-31. .............. 2.382.1–2

PV70-33. .............. 2.400.1–2

PV70-34. .............. 2.412.1–2

PV70-35. .............. 2.432.1–2

PV72-20. .............. 2.330.1–2

PV72-21. .............. 2.340.1–2

PV72-30. .............. 2.374.1–2

PV72-31. .............. 2.384.1–2

PV72-33. .............. 2.406.1–2

PV72-34. .............. 2.414.1–2

PV72-35. .............. 2.434.1–2

PV76-30A. ............ 2.376.1–4

PV76-31. .............. 2.386.1–4

RV08-20. .............. 6.010.1–2

RV08-22. .............. 6.045.1–2

RV10-20. .............. 6.020.1–2

RV10-22. .............. 6.050.1–2

RV10-24. .............. 6.062.1–2

RV10-26. .............. 6.150.1–2

RV12-26. .............. 6.156.1–2

RV16-26. .............. 6.160.1–2

RV50-22. .............. 6.055.1–2

RV50-26. .............. 6.152.1–2

RV52-26. .............. 6.157.1–2

RV58-20. .............. 6.015.1–2

SF08-20. .............. 1.012.1–2

SF08-21. .............. 1.031.1–2

SF08-22. .............. 1.042.1–2

SF08-23. .............. 1.051.1–2

SL08-22. .............. 1.040.1–2

SP08-47C. ............ 2.110.1–2

SP08-47D. ............ 2.120.1–2

SP10-41. .............. 2.080.1–2

SP10-47C. ............ 2.111.1–2

SP10-47D. ............ 2.121.1–2

SV07-31. .............. 1.350.1–2

SV08-20. .............. 1.010.1–2

SV08-20J. ............ 1.011.1–2

SV08-21. .............. 1.030.1–2

SV08-22. .............. 1.041.1–2

SV08-23. .............. 1.050.1–2

SV08-24. .............. 1.060.1–2

SV08-25. .............. 1.070.1–2

SV08-26. .............. 1.080.1–2

SV08-30. .............. 1.300.1–2

SV08-31. .............. 1.360.1–2

SV08-33. .............. 1.370.1–2

SV08-40. .............. 1.400.1–2

SV08-41. .............. 1.420.1–2

SV08-42. .............. 1.430.1–2

SV08-43. .............. 1.440.1–2

SV08-44. .............. 1.450.1–2

SV08-45. .............. 1.460.1–2

SV08-46. .............. 1.470.1–2

SV08-47A. ............ 1.500.1–2

SV08-47B. ............ 1.508.1–2

SV08-47C. ............ 1.520.1–2

SV08-47D. ............ 1.530.1–2

SV08-47E. ............ 1.540.1–2

SV10-20. .............. 1.016.1–2

SV10-21. .............. 1.032.1–2

SV10-22. .............. 1.044.1–2

SV10-23. .............. 1.053.1–2

SV10-24. .............. 1.064.1–2

SV10-25. .............. 1.076.1–2

SV10-31. .............. 1.368.1–2

SV10-33. .............. 1.372.1–2

SV10-34. .............. 1.380.1–2

SV10-40. .............. 1.407.1–2

SV10-41. .............. 1.422.1–2

SV10-42. .............. 1.432.1–2

SV10-43. .............. 1.442.1–2

SV10-44. .............. 1.452.1–2

SV10-47A. ............ 1.502.1–2

SV10-47B. ............ 1.510.1–2

SV10-47C. ............ 1.522.1–2



(continued)


MODEL PAGE NO. MODEL PAGE NO.

SV10-47D. ............ 1.532.1–2

SV10-47F. ............ 1.552.1–2

SV12-20. .............. 1.018.1–2

SV12-21. .............. 1.033.1–2

SV12-22. .............. 1.045.1–2

SV12-23. .............. 1.054.1–2

SV12-24. .............. 1.065.1–2

SV12-25. .............. 1.077.1–2

SV12-31. .............. 1.369.1–2

SV12-33. .............. 1.374.1–2

SV12-34. .............. 1.382.1–2

SV12-40R. ............ 1.410.1–2

SV12-41. .............. 1.424.1–2

SV12-42. .............. 1.434.1–2

SV12-60. .............. 1.620.1–2

SV16-20. .............. 1.020.1–2

SV16-21. .............. 1.034.1–2

SV16-22. .............. 1.046.1–2

SV16-23. .............. 1.055.1–2

SV38-20J. ............ 1.013.1–2

SV38-26. .............. 1.081.1–2

SV38-28. .............. 1.090.1–2

SV38-30. .............. 1.301.1–2

SV38-31J. ............ 1.361.1–2

SV38-38. .............. 1.390.1–2

SV58-20. .............. 1.014.1–2

SV58-22. .............. 1.043.1–2

SV58-23. .............. 1.052.1–2

SV58-24. .............. 1.061.1–2

SV58-25. .............. 1.071.1–2

SV58-26. .............. 1.082.1–2

All New ElectronicProportional Valve

Controllers

SECTION 3

SV58-30. .............. 1.302.1–2

SV58-40. .............. 1.403.1–2

SV80-25. .............. 1.075.1–2

SV98-T39. ............ 1.700.1–2

TR04-B20. ............ 6.300.1–2

TS08-20. .............. 2.812.1–2

TS08-27. .............. 2.860.1–4

TS10-26. .............. 2.852.1–2

TS10-27. .............. 2.862.1–2

TS10-36. .............. 2.900.1–4

TS12-26. .............. 2.854.1–2

TS12-27. .............. 2.864.1–2

TS38-20. .............. 2.813.1–2

TS38-21. .............. 2.823.1–4

TS80-30. .............. 2.872.1–2

TS98-30. .............. 2.882.1–4

TS98-31. .............. 2.890.1–4

TS98-T34. ............ 2.950.1–4

UP10-30. .............. 6.902.1–2

ZL70-30. ............... 2.602.1–4

ZL70-31. ............... 2.622.1–4

ZL70-33. ............... 2.632.1–4

ZL70-36. ............... 2.662.1–4

ZL72-30. ............... 2.604.1–2

ZL72-31. ............... 2.624.1–2

ZL72-33. ............... 2.634.1–2

ZL72-36. ............... 2.664.1–2

ZL76-30. ............... 2.606.1–2

ZL76-33. ............... 2.636.1–2

ZL76-36. ............... 2.666.1–2


Documents

High Performance Hydraulic Cartridge Valves and Electro ...Cartridge valves in custom manifolds offer several advantages to the machine designer: • System manifolds “clean up”