HEAT EXCHANGERS, SUCTION HEATERS & HEATING COILS

Turkey –Germany- UAE-Singapore www.ergil-rhino.com

sales@ergilgroup.com T +90 212 485 40 07

F +90 212 485 40 42 DOC NO : ERG-BRO-EMM-RHN-P04-XXX-09-131-REV.A

HEAT EXCHANGER Product Description:

Rhino Pipeline Equipment provides shell & tube type heat exchangers, suction and line and storage tank heaters to oil refining, chemical, Pharmaceutical, Petro-Chemical, LNG &LNP, Pulp & Paper, Cogeneration, and Geothermal industries since 1983. RHINO provides complete mechanical design. Our exchangers are fabricated in accordance with ASME Section VIII Div. 1 or Div.2 standards, as well as TEMA, HEI, and API specifications.

RHINO Shell and Tube Products

! Oil Coolers

! Feed-water Heaters

! Fuel Gas Heaters

! Spray Water Condensers

! Kettle Re-Boilers

! Condensers

SUCTION HEATER Product Description: Rhino Pipeline Equipment Suction and Line Heaters are used to heat high viscosity fluids and heavy oils in large tanks. This heated; lower viscosity fluid can then be easily discharged from the tank. Pinpoint heating puts energy where it is needed with no wasted energy. Electric heat is 100% efficient during the life of the heater. Entire assembly can be removed from the tank for cleaning and maintenance. Listed control panel is factory mounted and wired to the heaters. All temperature controls and sensors are factory installed.

RHINO Suction & Line Heaters’ Benefits

! Lower pumping costs

! Heats only the fluid being transferred, not the entire contents of the tank

! Minimize fouling and corrosion

! Heaters can be removed from service and used with additional tanks.

! Easy to install and test.

HEAT EXCHANGERS, SUCTION HEATERS & HEATING COILS

Turkey –Germany- UAE-Singapore www.ergil-rhino.com

sales@ergilgroup.com T +90 212 485 40 07

F +90 212 485 40 42 DOC NO : ERG-BRO-EMM-RHN-P04-XXX-09-131-REV.A

Technical Details

! 10" Carbon Steel Pipe Body and Heater Flange, 150 Lb Construction (Pipe Sizes from 5 - 20” available) ! 18" 150 Lb ANSI B16.5 Tank Mounting Flange Matched to 10" Pipe Body (Mating Flanges from 10 - 30" available) ! 30 - 40 kW (10 - 200 kW available) ! 240 and 480V, Three Phase (Up to 600V available) ! Moisture Resistant and Explosion Resistant Terminal Enclosure ! 0.475" Dia. Steel Sheath Low Watt Density Elements (5 W/In 2 )

HEAT EXCHANGERS, SUCTION HEATERS & HEATING COILS

Turkey –Germany- UAE-Singapore www.ergil-rhino.com

sales@ergilgroup.com T +90 212 485 40 07

F +90 212 485 40 42 DOC NO : ERG-BRO-EMM-RHN-P04-XXX-09-131-REV.A