Hall effect sensor specifications
4-28 VDC power May require pull up resister 3- or 5-wire
connection With external seal-off meeting NEC sec-ondary seal
requirements
Find out moreFor more information...
Honeywell Enraf2000 Northfield CourtRoswell, GA 30076Tel:
770-475-1900Fax: 770-475-1717www.honeywellenraf.com
Its rugged design and NTEPcertified flow ranges cover
yourrequirement for today and thefuture. The oval gear designgives
the meter exceptionallylow pressure drop. With thehigh frequency
Hall effect sen-sor output, it delivers resolutionneeded for
superior digital flowcontrol.
SpecificationsContinuous Flow Rate 3 - 150 GPM, viscosities to
300 CST12 - 565 LPM, viscosities to 300 CST
Pressure 400 PSI @ 100o F (28 Bar @ 40o C)
Temperature 185oF (85oC) Hall Effect Sensors Other limits may
apply to electricdevices
Viscosity Full nominal flow rate to 300 CST Up to 350,000 CST
with special gears
Connections Slip weld meter flanges
Materials Case: 316 Stainless Steel Oval gears: glass filled
Ryton Posts: 316 Stainless Steel Seals: Teflon
AccuracyLinearity +/- 0.25% @ 1 CST
Repeatability better than +/- 0.05%
Resolution Flow sensor: 384 PPG Dual pulse Quadrature output
Connections
Standard connection slip weld oncompanion flanges optional
custom sized spools withANSI flange
Ethanol & RefinedProduct Meters
8.38
1.0
10.38
2" WELD NECK
(OPTIONAL)FLANGE FLANGE
2" SLIP WELD
(STANDARD)2" PIPE (OPTIONAL)
SIZED TOAPPLICATION
FLANGE
P/N 10-30080
2" SLIP WELD
(STANDARD)
2" PIPE (OPTIONAL)SIZED TO
APPLICATION
2" WELD NECK
(OPTIONAL)FLANGE
NTEP Certification number: 08-028A1
