Embed Size (px)
Citation preview
HAZLE MEADOWS AUCTION CENTRE LEDBURY, HEREFORDSHIRE
HR8 2LP
The George Bewley private collection Sale of Lathes, cutting machines, gear shapers and cutters, drills and engineering tools. Also includes George Bewley
gearboxes, gearbox parts, spares and 3 cars.
WEDNESDAY 9TH DECEMBER - 10AM All items are situated at Clifton on Teme, Worcestershire.
Please contact us for full address.
Viewing Monday 7th and Tuesday 8th - 10-4 pm and morning of sale 8-10am.
Viewing for this sale MUST be done by appointment. Collections within 2 days after the sale by appointment
Buyers premium 6% + VAT on premium Hazle Meadows Auction Centre, Ledbury, Herefordshire, HR8 2LP Tel: (01531) 631122. Fax: (01531) 631818. Mobile: (07836) 380730
Website: www.hjpugh.co.uk E-mail: [email protected]
CONDITIONS OF SALE 1. All prospective purchasers to register to bid and give in their name, address and telephone number, in default of which the lot or lots purchased may be immediately put up again and re-sold 2. The highest bidder to be the buyer. If any dispute arises regarding any bidding the Lot, at the sole discretion of the auctioneers, to be put up and sold again. 3. The bidding to be regulated by the auctioneer. 4. In the case of Lots upon which there is a reserve, the auctioneer shall have the right to bid on behalf of the Vendor. 5. No Lots to be transferable and all accounts to be settled at the close of the sale. 6. The lots to be taken away whether genuine and authentic or not, with all faults and errors of every description and to be at the risk of the purchaser immediately after the fall of the hammer but must be paid for in full before the property in the goods passes to the buyer. The auctioneer will not hold himself responsible for the incorrect description or authenticity of or any fault or defect in any lot and makes no warranty. 7. To prevent inaccuracy and inconvenience in the settlement of purchases, no lot may be removed either during or after the sale without being previously paid for. 8. If any person neglects or refuses to comply with any of the foregoing conditions, the auctioneer shall be at liberty to resell the lot and any deficiency that may arise in the resale, together with all expenses attending it shall be made good by the defaulter. 9. AGENCY. The auctioneer normally acts as agent only and disclaims any responsibility for default by the seller or the buyer 10. WARRANTY OF TITLE AND AVAILABILITY. The seller warrants the auctioneer and the buyer that the seller is the true owner of the property consigned or is properly authorised to consign it for sale and is able to transfer the title of the property free of any third party claims. 11. TERMS - strictly cash. All accounts must be settled on the sale site on day of sale Maximum cash permitted to be taken £7,500. Debit cards accepted. Company Credit & Credit cards NOT ACCEPTED 12. V.A.T. at the current rate will be added to the purchase price of all goods subject to V.A.T. Goods are sold under the auctioneers V.A.T. Margin Scheme for second hand goods. V Denotes VAT on lots 13. DISCLAIMER OF LIABILITY - Neither the auctioneers, landowners or sellers nor any agent or employee of these bodies accepts any liability for any accident, loss, damage injury to any person or property whatsoever whether cause by their negligence, breach of contract or in any other way. 14. HEALTH AND SAFETY - The auctioneers have taken reasonable precautions to ensure the health and safety of everyone present. For these measures to be effective, everyone must take all reasonable precautions to avoid and prevent
1 Peugeot 406 GLX HDi 4dr saloon car. 1999. 1997cc. Runs. garage stored, 200,000miles. Reg. S47 DTC. V5
2 Mercedes SLK 320 auto convertible car. 2002. 3199cc. Petrol. garage stored, 94,000miles. Reg. KS51 OJU. V5
3 Peugeot 407 SW HDI 4dr estate car. 1997cc, 2005, garage stored, 101,000miles. Diesel. Reg. BL05 XFN. V5
4 Chassis hand built by George Bewley for his race car
5 Atco cylinder mower with roll, powered by a JAP engine
6 Admel drawing board on cast iron base
7 Garden Care lawn mower with collector
8 K'archer 411A pressure washer, Bosch strimmer and Echo strimmer
9 Pair of car ramps and jack
10 Migatronic MTE 220 welder with helmet. 3 Phase
11 Various oil and cans
12 Bradbury lorry jack 10Ton -2
13 Wooden racking 10ft
14 North Walsham utility power bandsaw model UB254 3 Phase
15 Pilot hydraulic press 20ton SN.350803. 3Phase
16 Butterfield MCR sandblaster compressor powered with single phase light extraction
17 Brown Master Pedrazzoli cut off saw. Italian model. 3 Phase
18 Delapena Precision honing machine SN.677. Cheltenham made, single phase
19 Startrite 14 RWS bandsaw. SN. 53210 415V. 3 Phase c/w 5 spare blades
20 Boring bar/spline cutter designed by George Bewley. 3 Phase, complete with a sludge pump for cooling and a quantity of boring bars.
21 Startrite Mercury MkII pillar drill SN.250/8404. Ranco motor, 5speed. 3 Phase
22 Lathe chuck
23 Drilltru Meddings bench drill. SN. DT9874, 3 Phase
24 Metal work bench with wooden top c/w drawer of reamers and drill bits 6x2ft
25 Workbench with granite top 2x2ft
26 Gas bottle trolley
27 Richmond type 0.1 spindle moulder. 3 Phase with sludge pump
28 Herbert 4 bank precision cutting head machine.
3 Phase
29 Cincinnati vertical milling and cutting machine SN.9A1V1H-31
30 4 Door wooden cabinet
31 Churchill surface grinder. 7.2HP SN.30207, 3 Phase
32 Metal cabinet and contents
33 Metal cabinet
34 Dexion racking
35 Large workshop bench with belt sander and Makita grinder. 15ft long
37 Lathe 3 jaw chuck 12"
38 Dividing head
39 Engineer press
40 Lathe 3 Jaw chuck 9"
41 Lathe 3 Jaw chuck 10"
42 Lathe 4 Jaw chuck 12"
43 Lathe 3 Jaw chuck 12"
44 Lathe chucks 5 & 6"
45 Lathe parts and accessories
46 Bewley Engineering wooden sign
47 Workshop heater on metal stand, single phase
48 Pfauter specialist milling machine for gear shaping. 3 Phase
49 Drummond 2A maxicut. 1962. Product of Asquith. This machine is designed for shaping and cutting gears. c/w compressor. 3 Phase. SN.FC-ARC-3474
50 Drummond high speed Maxicut gear shaper c/w tooling and shapers
51 Ward No.7 combination lathe, H.W Ward and Co. Worcester. This lathe is designed to feed gearboxes, shape headstocks and end train gearing. It has a quick power traverse box, sands equipment and motor drive. 3 Phase
52 Wall mounted grinder
53 Ward No.OE capstan lathe. Type. TMC 1075. 1979. 3 Phase
54 Aerostyle compressor for spares
55 Victoria surface grinder. Made in London.
SN.BEC 53711/162. 3 Phase
56 Combat Model 15 workshop heater. Output 44kw. 240V. Single phase
57 2 Boxes of lathe chucks, shapers, shafts, cutters and other lathe tooling
58 5 Litres of 10W-40 motor oil, air tools, drills and hand tools
59 Gear cutting tool and blanks
60 Aluminium blanks, shafts, cuttings tools and other lathe tooling
61 Aluminium and steel milling blanks
62 Lathe 3 Jaw chuck, shaping tools, gears, shafts, milling bits and other lathe tools- 2 boxes
63 Bench vice
64 Clarke CWII spot welder. 3KVA, single phase
65 Hilmor pipe bender. Type K2
66 Mitutoyo vertical vernier and lathe parts
67 Bolt cutter, Record 6" G clamp, welding clamps and spirit level
68 Thread cutters and tooling
69 Spanners to include Whitworth, Britool and King Dick
70 Box of lathe gears
71 Mitutoyo 45cm vernier and other measuring tools
72 Sockets, micrometres and G clamps
73 Reamers, milling bits, drill chuck and drill bits
74 Power tools, mole grips, air tools and hand tools
75 Box of lathe gears
76 Cutters and shapers
77 Spanners, sockets and drill bits
78 Box of air clips, spark plugs and lubricants
79 Full set of alphabetical and numerical stamps, threading attachment and taps
80 Sockets, straps, saws and spanners
81 Box of cutters and shapers
82 Box of drill bits
83 Lathe tools
84 Record No.84 bench vice
85 Record No.84 bench vice
86 TBH 140 arc welder and mask
87 Box of cutters
88 Mitutoyo micrometre, Baty dials and Brown & Sharpe No.62 micrometre
89 Batteries and power tools
90 Spanners, reamers and drill bits
91 Drilling attachment with Crompton and Parkinson motor
92 2 Boxes of rivets, nuts and bolts
93 Drill bits and cutters
94 Cutters, sprockets and reamers
95 Wesco 1ton chain hoist
96 Workshop press -2
97 Box of large drill bits
98 Lathe 3 Jaw chuck
99 Cutters, shapers, tools and drill bits
100 Large reamers
101 Box of cutters
102 Jones Shipman bench vice
103 Reamers and drill bits
104 Box of gears and thread cutters
105 Shaping tools, lathe gears and blanks
106 Lathe gears and threaders
107 Taps, dies and spanners
108 External threading tool and lathe attachments
109 Toolbox and contents and assorted nuts and bolts
110 Wooden toolbox and contents to include model makers tooling
111 Wooden box and contents to include Moore and Wright micrometre and taps and dies
112 Vintage car mirrors and carburettor parts
113 Clarke creeper board
114 Sun inductive timing light, assorted drilling bits and rolling bar
115 Steel and aluminium blanks
116 Collets and threader
117 Large reamers, drill bits and lathe parts
118 Hand tools
119 Honing bars
120 Box of cutters
121 Bench vice, lathe attachment and press
122 Pipe bending tools and attachments
123 Gearbox moulds
124 Brooke motor 10.6HP 3 Phase. SN.B254
125 Bewley gearbox parts
126 Box of sprockets
127 Clutch plates, wheel hub and sprockets
128 Gearbox sprockets and shafts
129 Gearbox sprockets and shafts
130 Gearbox sprockets and shafts
131 Wheel hub and sprockets
132 Gears/sprockets and shafts
133 Gaskets, sprockets and gearbox parts
134 Magneto parts, shafts, sprockets and clutch plate
135 Clutch parts and bearings
136 Gearbox housings -3
137 Gearbox housings -4
138 2 Boxes of clutch plates, gears and shafts
139 Bewley 2 speed and 3 speed gearbox covers
140 Clutch plates
141 Gearbox covers, clutch parts etc
142 Brake callipers and parts
143 Gearbox housings -5
144 Bewley gearbox
145 Bewley 2 speed gearbox
146 Bewley 3 speed gearbox
147 Bewley 2 speed gearbox
148 Bewley 2 speed gearbox
149 Bewley 2 speed gearbox
150 Clutch parts and wheel hub
151 Box of gearbox sprockets
152 Triumph 5T 500cc crank case
153 Thread cutters and shafts
154 Bewley 2 speed gearbox covers. Patent no. 1416888
155 Gears and sprockets
Notes
H.J. Pugh & Co.
HAZLE MEADOWS AUCTION CENTRE, LEDBURY, HEREFORDSHIRE, HR8 2LP
Annual collective sale of VINTAGE & CLASSIC ENGINES, TRACTORS,
TRACTOR SPARES, TOOLS, SEATS, MODELS, LITERATURE, MILITARY MEMORABILIA, ENAMEL &
TIN SIGNS, AGRICULTURAL BYGONES
SATURDAY 12th DECEMBER 9.30AM or 8am morning of sale
5% BUYERS PREMIUM + VAT on premium
Hazle Meadows Auction Centre, Ledbury. Herefordshire. HR8 2LP
Tel: 01531 631122. Fax: 01531 631818
Email: [email protected]
