Embed Size (px)
Citation preview
1
SmartOrder Technology
Hardware Install Guide
Version 1.0
24 November 2016
Copyright © SmartOrder Technology Limited
All Rights Reserved
This document may not be reproduced or redistributed without the permission of the
copyright holder. It may not be posted on any website other than smartordersystem.com
2
TABLE OF CONTENTS
Introduction 3
What hardware do I need? 3
Prepare Hardware 4
Setup Your Network Router 5
Setup Your Network Printer 13
Support
3
Introduction
In this document, we will guide you to setup your Smart POS system for the first time.
What hardware do I need?
To setup our POS system you will at least to have a 15 Inch All-in-One Computer, the main
terminal can be ours 15 Inch all-in-one Android Computer (Online Shop) or a Android tablet
with (1280 x 800). The main terminal will be using as the network server, therefore users do
not have to purchase additional servers. Secondly, user can decide how many printers or
cash drawer they needed. Generally a restaurant will need a minimum of two network
thermal printer and a cash drawer, one printer for printing the receipt and the other to print
the order. We recommend to purchase the network cable from our online shop. Because low
quality network cable will directly affect the stability of the system. If the network router
doesn't have enough network port, you can buy a network switch from our online shop as
well.
4
Prepare Hardware
Picture above show some hardware items for your reference
The following is the hardware list that required:
� 15" Quad Core All-In-One Capacitive Touch Screen (Recommended), can be bought from our
online shop
� Android Tablet with (1280x800) resolution, with tablet holder
� Network Router (We have a recommended model, a bad router will cause system unstable)
� Network Switch (Only if you got multiple devices that require more port than your router)
� SPRT POS88V Network Thermal Printer
� Cash Drawer
� Internet Cable (Cat5e or above)
� Android Smart Phone (Optional)
5
Setup Your Network Router
Picture above shows the network router we recommended, Huawei it is the largest
telecommunications equipment manufacturer in the world. User can also choose their own brand of
router but bad router will cause system unstable. We suggest to use the router we recommend as we
have done a list of testing. Once your router is ready, you should be able to find the network address
of the router behind the device.
From the picture above we can see the network address for this router is 192.168.3.1, please note that
6
different router would have different network address. Please check before access to it.
Now connect the power source for the network router and also the internet cable. The following
picture shows the port available on the router. Normally, there is only one port that is connect to the
internet provider. In the example below would be the blue port. The other port would be to the
devices that you will need to connect.
When connected it should looks like below picture
7
If your restaurant will need to use many network printer, the 4 ports on the router is not enough for
you. You only need to add a network router. You can find the picture below for your referrence
Now you have connected your router correctly, you can now go to setup your router. We will use the
router WS550 we recommended as an example. Please open your internet browser and enter your
router IP address.
8
If you have got all your connection correct, you should see the image below
Click on "Let's Start", the system will automatically scan any available network to connect.
If you already got a internal network that is available your will not need to configure anymore, but
most user will need to configure their PPPoE setting in order to connect to the internet.
9
If internet is not available you will find the screen below
If you already got internet available you will find the screen blow
If you already successfully connected to the internet you will not need to configure PPPoE
10
Click "Next" if you didn't connect to the internet you should see the screen below. You internet
provider should have got a username and password for you. Please enter the username and password
Once entered, you will see the screen below. This is the Wifi name and the password you are about
to configure. Please keep your password securely.
11
Your router system login password would be the same as your Wifi password.
If you need to change your network IP setting you can login to the router.
If you have successfully enter the router page, you will see the screen below, click on "Home
Network"
12
Click "LAN Interface" and you will see the screen below
If user need to change their IP setting, they can find it at LAN Interface Setting
Once save, all the IP of the connected device will change and reboot is recommended.
13
You can also reserve your IP address for your POS or Printer device.
Setup Your Network Printer
Prepare your printer, the picture below is the printer we recommended. This should be the best
printer with the given price.
14
The picture below shown the connection port of the printer
If the printer is not connecting to the cash drawer you will only need to connect the power and
network cable. The picture below shown the printer with correct connection.
Once connected, turn on the printer and is ready to use.
15
The printer needs to have the IP address range within the network router. If your printer IP address
is 192.168.1.113, and your network router range is 192.168.3.1 - 192.168.3.255. If the printer IP
address is not in the range of the network router it will not work.
To check the printer IP address you first need to turn off the printer. Press the "FEED" button and
hold. Turn on the printer power, and within few second printer will print the configuration of the
printer.
As long as the printer IP address is within the router IP range, and the printer will be ready to use. If
the IP is not within the range then you will need to change your router IP range. If your printer IP
address is 192.168.1.113 but your router IP range is 192.168.3.1 - 192.168.3.255, in this case you
will need to change your router IP range to 192.168.1.1 - 192.168.1.255 for this to work.
Once the configuration has completed, your SmartOrder system is ready to use.
16
Setup Your Invoice Logo
Please prepare your Logo with JPG file, the width of the picture would be within 570 px
Open "Microsoft Paint", open the Logo with "Microsoft Paint"
Click on File -> Save As -> select .bmp file format
17
Select ".bmp" for the file format type
Go to our website to download the printer setting tool, please find the "link" here
Open the software
1) Select POS88IV/V/VI
2) Select "NET" in the Port Type section
3) Enter your printer IP address
4) Click "Get Param", if successful you will see the pop-up windows "Get network port param
success!"
18
In the Bitmap Option section click "Browse"
Select your Logo bmp file
Once start downloading you will see the screen below
19
If success you will see
Now you can start using this printer to print invoice and the logo will appear on top
20
Support
For related enquiries, please contact our support team:
