Upload
others
View
12
Download
0
Embed Size (px)
Citation preview
1
GRF5040
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Revision Date: 10/01/19 Please contact Guerrilla RF at (+1) 336-510-7840 or [email protected]
Released 31.0 dBm Power-LNA™
Tuning Range: 0.1 – 3.8 GHz
GRF5040 is a high linearity PA with ultra-low noise fig-
ure (NF). The primary tune for this device covers 1.7 to
2.7 GHz and it achieves outstanding P1dB, IP3 and NF
over the band. The device can be tuned to deliver out-
standing performance over 0.1 GHz. to 3.8 GHz with
fractional bandwidths >30%. With a 10.0 Volt supply,
the device can deliver broadband OP1dB values of 31.0
dBm.
In addition to use as a PA or linear driver, GRF5040 is
well suited to demanding first, second or third stage
LNA applications requiring high linearity, ruggedness
and low NF.
Consult with the GRF applications engineering team for
custom tuning/evaluation board data and device s-
parameters.
Product Description
Features
Reference: 10V/170mA/2.5GHz
• Gain: 15.0 dB
• NF: 0.85 dB
• OP1dB: 31.0 dBm
• OIP3: 47.0 dBm
Reference: 8V/130mA/2.5GHz
• Gain: 15.0 dB
• NF: 0.85 dB
• OP1dB: 29.8 dBm
• OIP3: 46.3 dBm
• Flexible Bias Voltage and Current
• Process: GaAs pHEMT
Applications
• Multi-stage LNA
• Linear Driver Amplifier for High PAR
Waveforms
• Distributed Antenna Systems
• Microwave Backhaul
3.0 x 3.0 mm QFN-16
2
GRF5040
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Revision Date: 10/01/19 Please contact Guerrilla RF at (+1) 336-510-7840 or [email protected]
Released 31.0 dBm Power-LNA™
Tuning Range: 0.1 – 3.8 GHz
Absolute Ratings:
Caution! ESD Sensitive Device
Exceeding Absolute Maximum Rating conditions may cause permanent damage to the device.
Parameter Symbol Min. Max. Unit Drain Voltage VDD 12.0 V
Transient Average RF Input Power CW: (Load VSWR < 2:1; Duration: <1 hour)
PIN MAX 22.0 dBm
Average RF Output Power: (Load VSWR < 2:1;
VD: > 8.0 volts; Duration: Continuous)
POUT MAX 26.0 dBm
Average RF Output Power: (Load VSWR < 2:1;
VD: <= 8.0 volts; Duration: Continuous)
POUT MAX NA dBm
Operating Temperature (Package Heat Sink) TAMB -40 105 °C
Maximum Channel Temperature (MTTF > 10^6 Hours) TMAX 170 °C
Maximum Dissipated Power PDISS MAX 2.2 W
Electrostatic Discharge:
Charged Device Model: (TBD) CDM 1500 V
Human Body Model: HBM 250 V
Storage:
Storage Temperature TSTG -65 150 °C
Moisture Sensitivity Level MSL 1 --
Note: For manufacturing information, see the Guerrilla-RF.com website for the following docu-
ment located on the GRF5040 landing page: Manufacturing Note—MN-001 Product Tape and
Reel, Solderability and Package Outline Specification.
Link to manufacturing note
3
GRF5040
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Revision Date: 10/01/19 Please contact Guerrilla RF at (+1) 336-510-7840 or [email protected]
Released 31.0 dBm Power-LNA™
Tuning Range: 0.1 – 3.8 GHz
Pin Out (Top View)
Pin Assignments:
Pin Name Description Note
1 VENABLE Enable Voltage Input VENABLE and series resistor set IDDQ. VENABLE < =0.2 volts disables device.
On-die pull-down resistor will turn the part off if this node is allowed to float.
2 NC No Connect or Ground No internal connection to die
3 RF_In RF Input Pins 3-4 tied together on system board
4 RF_In RF Input Pins 3-4 tied together on system board
5 NC No Connect or Ground No internal connection to die
6 NC No Connect or Ground No internal connection to die
7 NC No Connect or Ground No internal connection to die
8 NC No Connect or Ground No internal connection to die
9 RF_Out/VDD PA Output/Bias Pins 9-10 tied together on system board. Supply Vdd here.
10 RF_Out/VDD PA Output/Bias Pins 9-10 tied together on system board. Supply Vdd here.
11 NC No Connect or Ground No internal connection to die
12 NC No Connect or Ground No internal connection to die
13 NC No Connect or Ground No internal connection to die
14 NC No Connect or Ground No internal connection to die
15 NC No Connect or Ground No internal connection to die
16 NC No Connect or Ground No internal connection to die
PKG BASE
GND Ground Provides DC and RF ground for LNA, as well as thermal heat sink. Rec-
ommend multiple 8 mil vias beneath the package for optimal RF and
thermal performance. Refer to evaluation board top layer graphic on
schematic page.
4
GRF5040
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Revision Date: 10/01/19 Please contact Guerrilla RF at (+1) 336-510-7840 or [email protected]
Released 31.0 dBm Power-LNA™
Tuning Range: 0.1 – 3.8 GHz
Nominal Operating Parameters:
Parameter Symbol Specification
Unit Condition Min. Typ. Max.
Target Performance (1.7-3.8 GHz Tune) Bias: 8.0V and 130mA unless
otherwise noted. (+25C)
Test Frequency FTEST 2.5 GHz
Gain S(2,1) 14.0 15.0 dB
Noise Figure (Evaluation Board) NF 0.85 1.05 dB
Output 1dB Compression Point OP1dB 28.3 29.8 dBm
Output Third Order Intercept Point OIP3 46.3 dBm Tones: 2499 and 2501 MHz at +8.0 dBm per tone
Switching Rise Time TRISE 200 ns
Switching Fall Time TFALL 200 ns
Quiescent Supply Current IDDQ 130 mA
Disabled Mode VDD: 8.0 volts; VENABLE: 0.0 volts
Supply Current (Leakage) IDD 370 uA
Thermal Data
Thermal Resistance: (IR Scan Method) jc 35 ᵒC/W
Channel Temperature @ +85C Refer-
ence (package heat sink)
TCHANNEL 122
(See note) ᵒC VDD: 8.0 volts; IDDQ: 130 mA
PDISS: 1.04W; No RF
Note: MTTF >10^6 hours for TCHANNEL < =170 degrees C.
5
GRF5040
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Revision Date: 10/01/19 Please contact Guerrilla RF at (+1) 336-510-7840 or [email protected]
Released 31.0 dBm Power-LNA™
Tuning Range: 0.1 – 3.8 GHz
GRF5040 Evaluation Board Data; Bias: 8.0V/130 mA; (1.7 to 2.7GHz Tune)
6
GRF5040
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Revision Date: 10/01/19 Please contact Guerrilla RF at (+1) 336-510-7840 or [email protected]
Released 31.0 dBm Power-LNA™
Tuning Range: 0.1 – 3.8 GHz
GRF5040 Evaluation Board Data; Bias: 8.0V/130 mA; (1.7 to 2.7 GHz Tune)
7
GRF5040
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Revision Date: 10/01/19 Please contact Guerrilla RF at (+1) 336-510-7840 or [email protected]
Released 31.0 dBm Power-LNA™
Tuning Range: 0.1 – 3.8 GHz
GRF5040 Evaluation Board Data; Bias: 8.0V/130 mA; (1.7 to 2.7 GHz Tune)
8
GRF5040
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Revision Date: 10/01/19 Please contact Guerrilla RF at (+1) 336-510-7840 or [email protected]
Released 31.0 dBm Power-LNA™
Tuning Range: 0.1 – 3.8 GHz
GRF5040 Evaluation Board S-Pars; 8V/130 mA: (1.7 to 2.7 GHz Tune)
Note: Mu factor >= 1.0 implies unconditional stability.
9
GRF5040
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Revision Date: 10/01/19 Please contact Guerrilla RF at (+1) 336-510-7840 or [email protected]
Released 31.0 dBm Power-LNA™
Tuning Range: 0.1 – 3.8 GHz
GRF5040 Application Schematic: (1.7 to 3.7 GHz)
GRF50XX Evaluation Board Assembly Drawing
10
GRF5040
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Revision Date: 10/01/19 Please contact Guerrilla RF at (+1) 336-510-7840 or [email protected]
Released 31.0 dBm Power-LNA™
Tuning Range: 0.1 – 3.8 GHz
GRF5040 Evaluation Board BOM: (1.7—2.7GHz)
Component Type Manufacturer Family Value Package Size Substitution
M1 (See note) Resistor Various 5% Sets Iddq 0402 ok
M2 Inductor Coilcraft HP 3.3 nH 0402 ok
M4 Capacitor Murata GJM 1.8 pF 0402 ok
M6 Capacitor Murata GJM 1.5 pF 0402 ok
M14 Inductor Coilcraft HP 15 nH 0402 ok
M16 Capacitor Murata GRM 0.1 uF 0402 ok
M17 Capacitor Murata GRM 100 pF 0402 ok
M19 Capacitor Murata GJM 0.5 pF 0402 ok
M21 Capacitor Murata GJM 18 pF 0402 ok
Evaluation Board PA-V3_RevA
11
GRF5040
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Revision Date: 10/01/19 Please contact Guerrilla RF at (+1) 336-510-7840 or [email protected]
Released 31.0 dBm Power-LNA™
Tuning Range: 0.1 – 3.8 GHz
GRF5040 Bias Resistor (M1) Selection Curves:
12
GRF5040
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Revision Date: 10/01/19 Please contact Guerrilla RF at (+1) 336-510-7840 or [email protected]
Released 31.0 dBm Power-LNA™
Tuning Range: 0.1 – 3.8 GHz
3.0 mm QFN-16 Suggested PCB Footprint (Top View)
3.0 mm QFN-16 Package Dimensions
13
GRF5040
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Revision Date: 10/01/19 Please contact Guerrilla RF at (+1) 336-510-7840 or [email protected]
Released 31.0 dBm Power-LNA™
Tuning Range: 0.1 – 3.8 GHz
Tape and Reel Information:
Guerrilla RF’s Tape and Reel specification complies with the Electronics Industries Association (EIA)
standards for ‘Embossed Carrier Tape of Surface Mount Components for Automatic Handling”. Reference
EIA-481. See the table on the following page for Tape and Reel specifications along with units per reel.
Devices are loaded with pins down into the carrier pocket with protective cover tape, wound into a plastic
reel. Each reel will be packaged in a cardboard box. There will be product labels on the reel, the protec-
tive ESD bag and the outside surface of the box.
Carrier Tape Width (W), Pitch (P), Feed Direction and Pin 1 Quadrant Information
Tape and Reel Packaging with Reel Diameter Noted (D)
14
GRF5040
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Revision Date: 10/01/19 Please contact Guerrilla RF at (+1) 336-510-7840 or [email protected]
Released 31.0 dBm Power-LNA™
Tuning Range: 0.1 – 3.8 GHz
Tape and Reel Specification and Device Package Information Table
Note: Lead count may vary. Reference applicable product data sheet
Package Carrier Tape Reel
Type Dimensions
(mm)
Leads Weight
(mg)
Width (W)
(mm)
Pocket Pitch (P)
(mm)
Pin 1 Quad-
rant
Diameter (D)
(inches)
Units per
Reel
QFN 2.0 x 2.0 x 0.50 12 7 8 4 Q1 7 2500
QFN 3.0 x 3.0 x 0.85 16 24 12 8 Q1 7 1500
DFN 1.5 x 1.5 x 0.45 6 4 8 4 Q1 7 2500
DFN 2.0 x 2.0 x 0.75 8 12 8 4 Q1 7 2500
LFM 3.5 x 3.5 x 0.75 See
note
TBD 12 8 Q2 7 1500
LFM 4.0 x 4.0 x 0.75 See
note
TBD 12 8 Q2 7 1500
15
GRF5040
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Revision Date: 10/01/19 Please contact Guerrilla RF at (+1) 336-510-7840 or [email protected]
Released 31.0 dBm Power-LNA™
Tuning Range: 0.1 – 3.8 GHz
Data Sheet Release Status: Notes
Advance S-parameter and NF data based on EM simulations for the fully packaged device using foundry sup-
plied transistor s-parameters. Linearity estimates based on device size, bias condition and experience
with related devices.
Preliminary All data based on evaluation board measurements in the Guerrilla RF Applications Lab.
Released All data based on device qualification data. Typically, this data is nearly identical to the data found in
the preliminary version. Max and min values for key RF parameters are included.
Information in this datasheet is specific to the Guerrilla RF, Inc. (“Guerrilla RF”) product identified.
This datasheet, including the information contained in it, is provided by Guerrilla RF as a service to its customers and may be used for informational purposes only by the customer. Guerrilla RF assumes no responsibility for errors or omissions on this datasheet or the information contained herein. Information provided is believed to be accurate and reliable, however, no responsibility is assumed by Guerrilla RF for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. Guerrilla RF assumes no liability for any datasheet, datasheet information, materials, products, product information, or other information provided hereunder, including the sale, distribution, reproduction or use of Guerrilla RF products, information or materials.
No license, whether express, implied, by estoppel, by implication or otherwise is granted by this datasheet for any intellectual property of Guerrilla RF, or any third party, including without limitation, patents, patent rights, copyrights, trademarks and trade secrets. All rights are reserved by Guerrilla RF.
All information herein, products, product information, datasheets, and datasheet information are subject to change and availability without notice. Guerrilla RF reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. Guerrilla RF may further change its datasheet, product information, documentation, products, services, specifications or product descriptions at any time, without notice. Guerrilla RF makes no commitment to update any materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
GUERRILLA RF INFORMATION, PRODUCTS, PRODUCT INFORMATION, DATASHEETS AND DATASHEET INFORMATION ARE PROVIDED “AS IS” AND WITHOUT WAR-RANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. GUER-RILLA RF DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATE-RIALS. GUERRILLA RF SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSE-QUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFOR-MATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Customers are solely responsible for their use of Guerrilla RF products in the Customer’s products and applications or in ways which deviate from Guerrilla RF’s published specifications, either intentionally or as a result of design defects, errors, or operation of products outside of published parameters or design specifica-tions. Customers should include design and operating safeguards to minimize these and other risks. Guerrilla RF assumes no liability or responsibility for applica-tions assistance, customer product design, or damage to any equipment resulting from the use of Guerrilla RF products outside of stated published specifications or parameters.