GreenSmart™ 2 Gas Fireplace Inserts...high-quality line of gas fireplace inserts that complement a broad range of architectural styles and heating needs at our manufacturing plant

www.fireplacex.com 1

GreenSmart™ 2 Gas Fireplace Inserts

Gas Inserts2

Fireplace Xtrordinair proudly produces our high-quality line of gas fireplace inserts that complement a broad range of architectural styles and heating needs at our manufacturing plant in Mukilteo, Washington. We utilize the finest materials and subject them to vigorous testing standards to make fireplace inserts that stand up to the rigors of time. These inserts are the best money can buy. We are proud to be passionate about the science and the art of making beautiful fire for your home.

Turn Your Fireplace Into An Efficient Heat Source

Our GreenSmart™ 2 fireplace inserts are designed to transform virtually any metal or masonry fireplace into an efficient source of heat. Traditional open fireplaces can have efficiency ratings as low as 15%, and depending on the condition can actually draw the heat out of your home for a net heat loss! Our heater-rated gas inserts achieve steady state efficiency ratings as high as 85%.

North America’s Most Popular Gas Insert Line!


Model 430 GSR2 with the Shadowbox face ,

Traditional Log Set and Black Painted Fireback

Gas Inserts4

Zone HeatingUnlike a gas furnace that ducts heat to all rooms of your home, you can use your insert for zone heating. Zone heating is all about focusing heat where people spend the most time. By turning down the thermostat on your furnace and using your gas insert as a supplemental heat source, it’s easy to save money on home heating bills.

Direct VentOur gas inserts are all “direct vent,” meaning they pull combustion air from the outside of the house and not your living space. For indoor air quality, safety and performance, both combustion air and exhaust gases pass through your existing chimney via a direct vent kit.

Choose The Right Model For YouYou have seven models of gas inserts to choose from depending on your heating needs, fireplace size, and taste.

Consult with your authorized Fireplace Xtrordinair dealer to verify which insert best suits your home heating needs. Our dealers are trained, qualified professionals that can provide expert installation and service on your new gas insert.

WarrantyYour gas insert is backed by a network of Specialty

Hearth Dealers and certified factory trained installers.

Fireplace Xtrordinair warrants our products to be free

from defects in material and workmanship for a period

of 7 years from the date of purchase. All parts, electronics,

and labor are covered for a full 2 years. No other

manufacturer’s warranty can compare.


Model 33 DVI with the Universal Face, Fyre-Stone Kit

and Stainless Steel Fireback

Gas Inserts6

Quality and Beauty from the Inside Out!

Personalize Your FireOur variety of unique face designs and interior

options give your insert a custom appearance

that not only makes a statement in any room, but

makes your fireplace look like it was designed that

was from the beginning.

Choose a FaceFireplace Xtrordinair offers more high quality,

beautiful face designs that any other company.

With such a wide variety of faces to choose from,

you are sure to find one that complements the

style and décor of any room.

Choose Your MediaYou are no longer limited to just one look for

the interior of your insert. Both traditional and

contemporary options are available with all of

our inserts that can completely transition the

look of your fire.

Choose an Interior Fireback

There are several fireback selections to choose

from which provide a dramatic backdrop to the

fire and add visual interest to the space. Pick a

fireback that best complements your face and

media selection.


Model 32 DVS with Ember-Fyre log set, Artisan Face, Common Brick Fireback and

custom painted panels.

Gas Inserts8

Model 34 DVL with Ember-Fyre log set, Black Painted Classic Arch Face, Herringbone Brick Fireback and

Arched Panels.


Model 34 DVL with Fyre-Stone Kit, Black Painted Shadowbox Face, and

One Piece Panel.

Gas Inserts10

Fully Loaded Deluxe Gas Insert Models: 32 DVS and 34 DVL The GreenSmart™2 Deluxe performance series is our top-selling gas insert line, offering every feature and convenience possible. This series includes full convection, built-in fans, Accent Lights*, and the GreenSmart™ 2 Wall Mounted Remote, all while boasting the highest efficiencies and largest turndown ratios of any gas inserts. This series is the ultimate in comfort and convenience. * The DVS features rear accent lights only. The DVL features top and rear * accent lights. Rear accent light feature not available when using * Driftwood or Stone Kit.

Basic Gas Insert Models: 31DVI and 33 DVIThe DVI series is our basic gas insert line that offers the same durable construction and large glass viewing area as the top-selling Deluxe gas inserts, but is perfect for anyone looking for a simplified operating system with basic controls and functions. For convenient operation, a Wall Thermostat, Thermostat Remote Control, or On/Off Wall Timer are available to choose from.

These four models feature a full convection chamber that is cleverly disguised by our face designs while it delivers heat throughout the room.

Basic Thermostat Remote Control

Wall Thermostat

GreenSmart 2 Thermostat Wall Mount Remote Control

Scan the QR Code to watch a video of the 34 DVL burning.

Scan the QR Code to watch a video of the 32 DVS burning.

ON/OFF Wall Timer


Model 34 DVL with Ember-Fyre log set, Large Universal Face

Gas Inserts12

Model 33 DVI with the Black painted Arisan Face and

Custom Panel.


Models 31DVI, 33 DVI, 32 DVS & 34 DVL Face Options

Complete Face/Panel These faces do not require Finish Panels

Faces That Require PanelsThese faces require Finish Panels to complete - see page 15 for details.

Universal Face2015 ANSI approved screen

31 DVI/32 DVS Small 23-1/8” H x 37-7/16” W31 DVI/32 DVS Large

29” H x 40-3/8” W33 DVI/34 DVL Small

27” H x 40-3/8” W33 DVI/34 DVL Large

33-1/2” H x 44” W

Artisan™ Double Door Limited Availability

Requires backing plateBacking Plate

31 DVI/32 DVS Small23-1/8” H x 37-1/2” W

31 DVI/32 DVS Large29” H x 40-3/8” W

Choose from our large selection of high quality face designs in a wide variety of finishes to match virtually any décor.

Black Painted

31 DVI & 32 DVS30 1/2” W x 20 13/16” H

33 DVI & 34 DVL34” W x 24 7/8” H

Bronze Painted

Shadowbox™ (shown with one piece finish panel)2015 ANSI approved screen

Black Painted

Metropolitan™2015 ANSI approved screen

31 DVI & 32 DVS 22” H x 30” W

33 DVI & 34 DVL26 1/2” H x 34 3/4” W

Black Painted

Brushed NickelLimited Availability

Classic Arch™31 DVI & 32 DVS

22” H x 30” W33 DVI & 34 DVL

26 1/2” H x 34 3/4” W

Artisan™31 DVI & 32 DVS

22” H x 30” W33 DVI & 34 DVL

26 1/2” H x 34 3/4” W

Black Painted

Hand-Rubbed Bronze Patina33 DVI & DVL only

French Country™31 DVI & 32 DVS

22” H x 30” W33 DVI & 34 DVL

26 1/2” H x 34 3/4” W

Brushed NickelLimited Availability

Black Painted

Architectural™ Rectangular or Arched Double DoorLimited Availability

Requires backing plate

Backing Plate Backing Plate 31 DVI/32 DVS Small 33 DVI/34 DVL Small 23-1/8” H x 37-1/2 W 27” H x 40 -3/8” W 31 DVI/32 DVS Large 33 DVI/34 DVL Large 29” H x 40-3/8” W 33-1/2” H x 44” W

Gas Inserts14

FirebacksChoose the perfect fireback to complement your media and provide a backdrop for your fire. Our fireback selections

range from simple and contemporary to decorative, traditional styles. Note: When using the Fyre-Stone Rock

Kit or Driftwood Fire Art in the 31 DVI or 32 DVS models, you only have the option of the Black Enamel or

Stainless Steel interiors.

Models 31DVI, 33 DVI, 32 DVS & 34 DVL Finish Options

Fyre-Stone™ Rock Kit with Glass Media For All Models

Media OptionsFireplace Xtrordinair offers a variety of interior media options so you can completely transition the look of your

insert as well as complement any architectural style. For both the Deluxe and Basic models, choose between the

Traditional Log Set, the Fyre-Stone™ Rock Kit with Glass Media or Driftwood Fire Art™ with Glass Media. The Deluxe

models also come with the choice of the award-winning Ember-Fyre™ burner with a high-definition log set for an

incredibly realistic fire.

Common Brick Fireback shown with Traditional Log Set

Traditional Log Set with Dancing-Fyre™ For All Models

Driftwood Fire Art™ with Glass MediaFor All Models

Herringbone Brick Fireback shown with Traditional Log Set

Black Enamel Fireback shown withDriftwood Fire Art and Glass Media

Stainless Steel Fireback shown withFyre-Stone Rock Kit and Glass Media

Handmade Brick Fireback shown with Traditional Log Set

High Definition Ember-Fyre™ Log Set For 32 DVS and 34 DVL Only

(DVS Shown)


Finishing Your Fireplace InsertInsert panels are used to close off the opening of your fireplace when installing a gas insert. Fireplace Xtrordinair offers a choice of five looks. Please see page 23 for panel dimensions.

8” x 10” Arched Panel and TrimThis option offers the graceful arched upper panel, which adds a desirable element to many installations. To ensure coverage of the fireplace opening, consideration must be made to account for the radius of the top panel.

Rectangular Panel and TrimThe Rectangular Panel system is available in three sizes and is the most versatile.

Inside-Fit PanelYou can modify (cut-down) any of the standard rectangular panels to fit the inside opening of your fireplace.

Lower Zero Clearance Panel and TrimDesigned to be used with Rectangular Panel systems, this lower panel offers a finished appearance to your installation when the existing fireplace opening is elevated above the floor. This panel can be cut to size and will cover up to 7” below the insert.

Bottom Panel and Trim Only

One-Piece PanelsThe one-piece panel is flat, has no trim, or seams and does not require a hearth extension for a very clean look. This panel requires approximately 1” more depth, height and width to your fireplace opening for the insert to fit. See your Owner’s Manual for details. 3 and 4 sided custom panels are also available.

Optional Insert Wiring Kit

If you do not want the power cord running across your hearth, use our optional U.L. approved Fan Wiring Kit. This kit allows you to hard-wire the electrical connection within your existing fireplace for a safe and cord free installation. Available for all gas inserts.

Go to the Fireplace Xtrordinair™ Website and Design Your Own Fireplace Insert

Customize the right insert for you. www.fireplacex.com has a wide selection of premium quality gas, wood and electric fireplaces and fireplace inserts – each custom-crafted with an eye for detail. But what’s going to work in your house?

The Fireplace Xtrordinair Fire Designer can help you customize your insert with an easy and fun website that helps you choose the right insert for the right space and for the right look.

Print the specifications of the insert you’ve designed and take them into any of the more than 1,200 Fireplace Xtrordinair dealers worldwide for pricing, installation and more.

Gas Inserts16

430, 616 & 616 Diamond-Fyre™: Traditional Hearth Fireplace InsertsThe Traditional Hearth Series showcases a very large viewing area that is second to none. A traditional

hearth look is achieved by having our ceramic glass go almost all the way to the bottom of the unit and hearth. These gas inserts convert an existing masonry or metal fireplace into an efficient heater while preserving the charm of a traditional fireplace.

Shadowbox Face - Black Shadowbox Face - Bronze

Metropolitan Face

Model 616 Face Dim: 35-1/2” W x 25-5/8” H Model 616 Glass Area: 27” W x 19-3/4” H



Face Options

Universal Face


Model 430 Face Dim: 31-7/8” W x 22-3/4” H Model 430 Glass Area: 23” W x16 ” H

Model 430 Face Dim: 31-1/4” W x 22-1/2” H Model 430 Glass Area: 23” W x16 ” H

Model 430 Face Dim: 32” W x 21-7/8” H Model 430 Glass Area: 23” W x16 ” H

Model 430 Face Dim: 32” W x 21-7/8” H Model 430 Glass Area: 23” W x16 ” H

The Traditional Hearth Series is designed to fit most fireplace openings. Having the controls located laterally allows for an almost 20% increase in glass viewing area. The glass on these inserts features the 2015 ANSI approved invisible safety screen.

The Traditional Hearth Series comes complete with fans, 3 Accent Lights (top and back), a burner and the GreenSmart 2 Wall Mounted Remote. The Comfort Control™ allows the middle and front burner to operate independently of the rear burner for maximum flame turndown.

*Not available on the 616 Diamond-Fyre.


Model 616 Diamond-Fyre with the Metropolitan Face, Black Painted

Fireback and One-Piece Panel.

Scan the QR Code to watch a video of the 616 burning.

Gas Inserts18

Fireback OptionsChoose the perfect fireback to complement your media and provide a backdrop for your fire. Our fireback

selections range from simple and contemporary to decorative, traditional styles.

Media OptionsTransitional interior media options allow you to give your 616 or 430 insert a whole new appearance. The

highly detailed Traditional Log Set offers a timeless look, while Driftwood Fire Art™ transforms the appearance

of your fire completely to a more modern style. The 616 Diamond-Fyre™ features the most contemporary

media, with a bed of reflective crushed glass in three colors to choose from.

Straight Brick Fireback shown with Traditional Log Set

Herringbone Brick Fireback shown with Traditional Log Set

Black Enamel Fireback shown with Driftwood Fire Art

Stainless Steel Fireback shown with Fyre-Stone Rock Kit

Handmade Brick Fireback shown with Traditional Log Set

Driftwood Fire ArtTraditional Log Set Fyre-Stone Rock KitModel 616 ONLY

Standard Black Painted Fireback shown with Fyre-Stone kit

Glass MediaModel 616 DF ONLY

PlatinumMedia

BronzeMedia

CobaltMedia


Insert Wiring Kit OptionIf you do not want the power cord running across your hearth use our optional U. L. approved Fan Wiring Kit. This kit allows you to hard-wire the electrical connection within your existing fireplace for a safe and cord free installation. Available for all gas inserts.

One-Piece Finish PanelsOne-piece panels are available for the 616 and 430 and come in two sizes.

Model 616 Model 43030-1/2” H x 42” W 25” H x 38” W 34” H x 44” W 28” H x 40” WCustom panel sizes are available through your Fireplace Xtrordinair dealer.

Model 430 with Wilmington Carbon Patina Face and

Driftwood log set

Use your smart phone or tablet to

watch a video of the 430 in action.

Gas Inserts20

Flame Adjustment Adjusts the height/heat of the flame as you desire. 6 levels of flame height to choose from. Not used while in Smart Thermostat setting.

Comfort Control™Turns off the back burner which lowers the BTU input. Allows you to burn less gas on milder days

when you want to enjoy a fire and not overheat your living area. Not applicable to the 616 Diamond-Fyre model.

Accent Lights Create a warm glow to highlight the fireplace interior. Use year-round to add ambiance. 6 levels to choose from.

Convection Fans Twin 90 CFM fans circulate room air around the firebox and deliver heated air into your home. 6 speeds to choose from.

Accent Lights add a warm glow to the interior of the firebox and can be used whether the fire is on or off. These Accent Lights serve as a perfect nightlight or soft, indirect light for the room and allow for visual enhancement of your insert 365 days a year. Rear accent lights not available on DVS and DVL when using Driftwood or Stone Kit. Accent Light Off Accent Light On

With the push of a button, Comfort Control™ will turn off the rear burner while leaving the front burner on for an attractive flame appearance when less heat output is desired. This feature not only ensures your comfort, but does not waste energy when less heat is desired. Comfort Control™ offers the ultimate in heating flexibility and allows you to enjoy your fire year-round.

Comfort Control™ (Featured on All Models Except the 616 Diamond-Fyre)

Accent Lights (Featured on Deluxe and Traditional Hearth Models)

Amazing GreenSmart™ 2 Features

Multi-Function Wireless Thermostat Remote Control(Featured on Deluxe andTraditional Hearth Models) Functions of the Remote:• Thermostat• Flame Adjustment• Fan Operation• Accent Light Control• Comfort Control™• GreenSmart™ 2 /CPI Pilots

Thermostat Setting

Fireplace turns ON or OFF to maintain your desired home/room temperature.

Manual Setting

ON/OFFFire and fan stay where you manually set it.

Smart Thermostat SettingFire height will adjust automatically (up or down or OFF) to better maintain your temperature setting. A greener way to heat.

Choice of Pilot Modes (Featured On All Models)Easily Switch Between Pilot Modes. GreenSmart™ 2: Use this mode during the summer or on days when mild heat is desired to reduce gas consumption from the Pilot.

CPI-Continuous Pilot: Use Continuous Pilot during the fall and winter months or in cold climate areas where more heat is desired. This mode keeps the Pilot on at all times and warms the vent system to maintain a strong draft in the chimney and reduce moisture condensation on the glass.Control Settings

Use mobile device to watch a video of how

this GreenSmart™ 2 remote works.


1 2 3 4Existing Masonry or Zero Clearance Metal Fireplace

Select a Fireplace Insert

Choose Size and Type of Panel

Add Your Face Selection

Installing An Efficient Gas Insert In Your Metal or Masonry FireplaceThe first step is determining whether you have a metal (zero clearance) or masonry fireplace and which insert will fit into your fireplace. Your Lopi Design Center Professional can help if you need it. They will also provide you with your new air intake system and exhaust vent liners. It is important that this work is done by a hearth professional.

Next determine which insert is best for your home based fireplace size and your heating requirements.

Choose your preferred style of insert panel. (Custom fit 3 and 4 sided panels are also available).

Select a face design and optional firebrick and you are ready to enjoy your new efficient gas insert by Lopi!

If you do not want the fan power cord running across your hearth, consider using the optional Fan Wiring Kit which allows you to hard wire the fan’s electrical connection within your existing fireplace.

1

3

4

2

Direct Vent KitLooking for a clean look to finish off the top of your chimney after your insert is installed? Lopi offers a decorative direct vent “Mission-Style” chimney cap and 30’ liner kit for your new gas insert.

For Models 31 DVI, 32 DVS and 430Part No. 96200330

For Model 33 DVI, 34 DVL and 616 and 616 DFPart No. 96200331

B

A

C

D

Minimum Fireplace Requirements Per Model A - Height

3-Piece 1-Piece

19-1/2” 20-5/8”

23-3/4” 24-7/8”

20-1/4”

24-1/4”

B - Width

3-Piece 1-Piece

26-1/2” 29”

31-1/2” 32-1/2”

30-1/2”

35”

C - Depth

3-Piece* 1-Piece

15-5/8” 16-7/8”

15” 16-1/4”

15-1/2”

16-1/2”

D - Hearth Ext.

3-Piece 1-Piece

1-1/4” 0

1-1/4” 0

1-3/4”

12”

Panel Type

31DVS/32DVS

33DVI/34DVL

430

616/616DF

* Insert sits 1-1/4” further onto hearth

Insert Wiring Kit OptionIf you do not want the power cord running across your hearth use our optional U. L. approved Fan Wiring Kit. This kit allows you to hard-wire the electrical connection within your existing fireplace for a safe and cord free installation. Available for all gas inserts.

Gas Inserts22

3

2

6 5

1

4

Fireplace InsertsSpecifications The dimensions and clearances on this page are for reference only. Refer to the Owner’s Manual prior to installation.

HeightWidth in FrontWidth in Back

DepthFlex Vent Diameter

Unit WeightGlass Size

(viewing glass will vary slightly with face design)Powerful Convection Fans

Heating Capacity*BTU Input (NG)BTU Input (LP)

Steady State Efficiency Up To (High)Steady State Efficiency determined using maximum venting as tested under DOE 10 CFR part 430, Subpart B, Appendix 0.

Canada Energuide Efficiency

AFUE

Performance *Heating Capacity can be affected by negative pressure in the home and by prevailing atmospheric conditions. Contact local building or fire officials about restrictions and installation requirements in your area.

Clearances To Combustibles Installation information is available at your local Fireplace Xtrordinair dealer or online at www.fireplacex.com

Panel Sizes Measurements for each panel is for maximum fireplace opening coverage - Panels not used on Architectural and Universal Faces. 3 and 4 sided Custom Fit Panels are available from your Fireplace Xtrordianir dealer.

Arched 8” sides x 10” top

Rectangular 4” sides x 6” topRectangular 8” sides x 10” top

Rectangular 10” sides x 13” top(all can be trimmed for inside fit of fireplace opening)

One Piece SmallOne Piece Large

Tested and Certified by to ANSI Z21-88a-2009, applicable sections of UL307b-1995Note: Improper installation of your gas appliance or failure to operate it in accordance to the guidelines detailed in the Owner’s Manual may negate your warranty and endanger your home and family. Installation information is available on our website at www.fireplacex.com.We recommend all Fireplace Xtrordinair appliances be installed and maintained on an annual basis by your Specialty Hearth Retailer.

1 = Floor to Mantle2 = Floor to Top Facing

3 = Insert to Sidewall 4 = Insert to Side Facing

5 = Extension onto Hearth6 = Hearth Dimensions

FE Efficiency determined using CSA P4.1-02.

31 DVI

1 = 35”* (889mm)2 = 35” (889mm)3 = 4-1/2” (114mm)4 = 4-1/2” (114mm)5 = 1-1/4”** (32mm)6 = 0” Note:1 & 2 - measured from floor.3 & 4 - measured from side of unit.

19-1/2” (495mm)26-1/2” (673mm)18” (457mm)15-1/8” (384mm)3” Exhaust - 3” Air Intake115 lbs.24-1/4” W x 12-3/4” H352.5 sq. in.180 CFM

Up to 1,500 square feet31,000 (high) - 10,700 (low)31,000 (high) - 12,600 (low)31 DVI 32 DVS81.9% (NG) 82.64 (NG)84.33 (LP) 86.13 (LP)

70% (NG) 71.08% (NG)72.35% (LP) 73.73% (LP)67.8% (NG) 75.4% (NG) 75.3% (LP) 76.2% (LP)

40-3/8” w x 23-1/2” h, side 40-3/8” w x 28-7/8” h top37-1/8” w x 25” h40-3/8” w x 28-7/8” h44-3/8” w x 31-7/8” h

* Maximum 12” mantle depth

**0” If used with one piece panel

38” w x 25” h40” w x 28-1/2” h

32 DVS

1 = 35”* (889mm)2 = 35” (889mm)3 = 4-1/2” (114mm)4 = 4-1/2” (114mm)5 = 1-1/4”** (32mm)6 = 0” Note:1 & 2 - measured from floor.3 & 4 - measured from side of unit.

19-1/2” (495mm)26-1/2” (673mm)18” (457mm)15-1/8” (384mm)3” Exhaust - 3” Air Intake115 lbs.24-1/4” W x 12-3/4” H352.5 sq. in.180 CFM

Up to 1,500 square feet31,000 (high) - 10,700 (low)31,000 (high) - 12,600 (low)31 DVI 32 DVS81.9% (NG) 82.64 (NG)84.33 (LP) 86.13 (LP)

70% (NG) 71.08% (NG)72.35% (LP) 73.73% (LP)67.8% (NG) 75.4% (NG) 75.3% (LP) 76.2% (LP)

40-3/8” w x 23-1/2” h, side 40-3/8” w x 28-7/8” h top37-1/8” w x 25” h40-3/8” w x 28-7/8” h44-3/8” w x 31-7/8” h



38” w x 25” h40” w x 28-1/2” h

430

Up to 1,500 Sq. Ft. 31,000 (high) - 11,241 (low)

31,000 (high) - 7,702 (low)

76.3% (NG)79.23% (LP)

65.29% (NG) 67.56% (LP)68.8% (NG)67.2% (LP)

20-1/4” (515mm)30-1/2” (775mm)21” (534mm)15-1/2” (394mm)”3” Exhaust - 3” Air Intake106 lbs.23” W x 16” H430 sq. in.180 CFM

1 = 36-1/2”* (927mm)2 = 35-1/2” (902mm)3 = 6” (152mm)4 = 5” (102mm)5 = 0”6 = 12” (305mm)

38” w x 25” h40” w x 28” h



33 DVI

1 = 35-1/2”* (902mm)2 = 35-1/2” (902mm)3 = 4” (102mm)4 = 4” (102mm)5 = 1-1/4”** (32mm)6 = 0”

23-3/4” (603mm)31-1/2” (800mm)20” (508mm)14-1/2” (368mm)4” Exhaust - 3” Air Intake135 lbs.27-3/4” W x 17” H518.38 sq. in.180 CFM

Up to 2,000 square feet40,000 (high) - 11,900 (low)40,000 (high) - 7,400 (low)33 DVI 34 DVS78.66% (NG) 82.71% (NG)73.44% (LP) 82.61% (LP)

70.05% (NG) 72.83% (NG)70.23% (LP) 73.74% (LP)69.5% (NG) 77.3% (NG)69.9% (LP) 79.4% (LP)

44-3/16” w x 28-1/4” h side44-3/16” w x 33-3/8” h top40” w x 29” h44-3/16” w x 33-3/8” h48-3/16” w x 36-3/8” h

Note:1 & 2 - measured from floor.3 & 4 - measured from side of unit.



42” w x 30-1/2” h44” w x 34” h


35,000 (high) - 18,637 (low)616 616 DF 77.3% (NG) 76.7% (NG)79.23% (LP) 79.07% (LP)

64.38% (NG) 64.75% (NG) 66.52% (LP) 66.34% (LP)69.1% (NG) 68.8% (NG)69.8% (LP) 67.2% (LP)

23-5/16” (592mm)34” (864mm)24” (610mm) 16” (406mm)4” Exhaust - 3” Air Intake133 lbs.27-1/2” W x 19-3/4” H616 sq. in.180 CFM

616 DF

1 = 36-1/2”* (927mm)2 = 35-1/2” (902mm)3 = 6” (152mm)4 = 5” (102mm)5 = 0”6 = 12” (305mm)

42” w x 30 1/2” h44” w x 34” h

* Maximum 12” Mantle depth

34 DVL

1 = 35-1/2”* (902mm)2 = 35-1/2” (902mm)3 = 4” (102mm)4 = 4” (102mm)5 = 1-1/4”** (32mm)6 = 0”

23-3/4” (603mm)31-1/2” (800mm)20” (508mm)14-1/2” (368mm)4” Exhaust - 3” Air Intake135 lbs.27-3/4” W x 17” H518.38 sq. in.180 CFM

Up to 2,000 square feet40,000 (high) - 11,900 (low)40,000 (high) - 7,400 (low)33 DVI 34 DVS78.66% (NG) 82.71% (NG)73.44% (LP) 82.61% (LP)

70.05% (NG) 72.83% (NG)70.23% (LP) 73.74% (LP)69.5% (NG) 77.3% (NG)69.9% (LP) 79.4% (LP)

44-3/16” w x 28-1/4” h side44-3/16” w x 33-3/8” h top40” w x 29” h44-3/16” w x 33-3/8” h48-3/16” w x 36-3/8” h

Note:1 & 2 - measured from floor.3 & 4 - measured from side of unit.



42” w x 30-1/2” h44” w x 34” h


39,000 (high) - 11,872 (low)616 616 DF 77.3% (NG) 76.7% (NG)79.23% (LP) 79.07% (LP)

64.38% (NG) 64.75% (NG) 66.52% (LP) 66.34% (LP)69.1% (NG) 68.8% (NG)69.8% (LP) 67.2% (LP)

23-5/16” (592mm)34” (864mm)24” (610mm) 16” (406mm)4” Exhaust - 3” Air Intake133 lbs.27-1/2” W x 19-3/4” H616 sq. in.180 CFM

616

1 = 36-1/2”* (927mm)2 = 35-1/2” (902mm)3 = 6” (152mm)4 = 5” (102mm)5 = 0”6 = 12” (305mm)

42” w x 30 1/2” h44” w x 34” h

* Maximum 12” Mantle depth

Gas Inserts24

See our complete line of fireplacesVisit us online: www.fireplacex.com

Additional Fireplace Xtrordinair ProductsIf you are in the market for other hearth products, Fireplace Xtrordinair manufactures a full line of wood, gas and electric fireplaces and electric and wood burning fireplace inserts.

Electric Linear Fireplaces

Gas FireplacesFireplace Xtrordinair offers a complete line of heater rated gas fireplaces in both landscape and portrait-style designs. There are Fireplace Xtrordinair gas fireplaces in many

sizes and for every heating need.

Linear Gas Fireplaces

www.fireplacex.com

Electric Linear Fireplaces

The Fireplace Xtrordinair Electric Fireplaces offer the convenience of adding a fireplace to any room within your home. With no venting required, installation can be completed in as little as one hour. They offer a selection of finish faces to match any home decor.

www.fireplacex.com

GreenSmart™ 2 Gas Fireplaces Tempest Torch™The Tempest Torch outdoor gas lamp is designed to create the ultimate in lighting enhancement. The patent pending Tempest Torch creates a natural venturi effect causing the flame to spiral and dance within the tempered glass walls without the use of electricity.

For the ultimate in contemporary design Fireplace Xtrordinair offers a range of high performance linear gas fireplaces that feature 36, 44 and 60 inch wide fire viewing area and a unique Fire Sculpture™ interior art.

Wood Burning Inserts

Flush Wood Hybrid-Fyre® Inserts www.fireplacex.com

Flush Wood Hybrid-Fyre® Inserts

CLEANEST BURNING

WOOD INSERTS IN THE

WORLD

K - Sidewall To Insert L - Side To Facing M - Top Facing N - Mantle O - Hearth Side* P - Hearth Depth*

R - Mantel BreastplateS - Mantel ColumnT - Extension on HearthQ - Any Room Combustible

Minimum Clearances to Combustibles

K N

M

P

O

LT

R

S

Q

AB

C

D

E

F

G

Minimum Fireplace Requirements

A - Height (Front) B - Height (Rear) C - Width (Front) with GreenStart™ Igniter

D - Width (Rear) E - Depth F - Hearth Depth*

G - Hearth Width

Photos and illustrations are for descriptive purposes only. We reserve the right to improve or change our products without prior notification. Hybrid-Fyre™ and all other trademarks belong to Travis Industries, inc. Consult the Owner’s Manual for complete installation requirements. © Copyright T. I. 03/2014 Printed in the U. S. A. 98800725

See our complete line of fireplacesVisit us online: www.fireplacex.com

Installation Specifications Always refer to the and use the Installation Manual for complete install information.

* See Owner’s Manual for complete hearth and R Value requirements

We suggest that you have an authorized Fireplace Xtrordinair dealer install your fireplace insert. If you install the fireplace insert yourself, your authorized dealer should review your installation plans.

The both Flush Wood Hybrid-Fyre® Insert’s are designed for installation in masonry fireplaces and factory-built metal (Z.C.) fireplace. Check with your local building officials for any permits required for installation of this fireplace insert and notify your insurance company before proceeding with installation.

The both Flush Wood Hybrid-Fyre Insert’s must be installed with a Positive Flue (full chimney reline). See Owner’s Manual for details.

Large Flush Wood11-5/8” (296mm) 6-1/4” (159mm)37-1/2” (953mm)37-1/2” (953mm)8” (204mm)16” (406mm) USA18” (458mm) Canada37-1/2” (953mm)6-1/8” (156mm)1-1/2” (39mm)36” (915mm)

Small Flush Wood

* See Owner’s Manual for complete hearth clearances

10-1/2” (267mm) 5-1/2” (140mm)37” (940mm)41” (1042mm)8” (204mm)18” (458mm)

37” (940mm)5-1/2” (140mm)0”36” (915mm)

23-1/2” (597mm)22” (559mm)33” (839mm) (includes 2” for power cord)40” (1016mm) 3” deep from front opening 20-3/4” (528mm) 19” (483mm) 18” (458mm)

47” (1093mm)

Large Flush Wood Small Flush Wood19” (483mm)19” (483mm)27”* (686mm) (includes 2” for power cord)34-3/4” (883mm)5” deep from front opening 19-1/4” (486mm) 14” (356mm)17-1/2” (446mm) USA19-1/2” (495mm) Canada40-3/4” (1036mm)

Testing Tested and certified by Intertek Laboratories Inc. Report #500346479PRT-001 Safety Tested to U. L. 1482 and ULC S628-1993

Both Flush Wood Hybrid-Fyre® insert’s are constructed from the highest quality materials at our state-of-the-art factory located in Mukilteo, Washington. From heavy gauge steel to real masonry brick, along with a stainless steel baffle and air tubes, you can see the difference in performance and quality. Our Flush Wood Hybrid-Fyre® inserts are built with long-lasting value and Fireplace Xtrordinair’s “Real World” Seven Year Warranty.

High Quality Construction

Fireplace Xtrordinair offers two flush to the fireplace wood burning inserts. The 33 Elite Plus and the Large Flush Wood Hybrid-Fyre® inserts that feature a super clean burn, high efficiency and the revolutionary GreenStart™ automatic wood igniter.

Photos and illustrations are for descriptive purposes only. We reserve the right to improve or change our products without prior notification. Trademarks belong to Travis Industries, inc. Consult the Owner’s Manual available on the www.fireplacex.com website for complete installation requirements. © Copyright T. I. 08/14 - Printed in the U. S. A. - 98800157

All Fireplace Xtrordinair Gas Insert faces come with 2015 ANSI compliant safety screen.

These screens are designed to be virtually invisible and prevent accidental contact with

the hot glass surface on the fireplace insert. You may want to take additional safety

measures such as adding a firescreen in front of your insert. These precautions will

allow everyone in your home to safely enjoy the comfort and warmth of your new gas

insert.

Documents

GreenSmart™ 2 Gas Fireplace Inserts...high-quality line of gas fireplace inserts that complement a broad range of architectural styles and heating needs at our manufacturing plant