GreenSmart™ Gas Fireplace Inserts with Remote

Basic GreenSmart Control SystemYour Fireplace Xtrordinair dashboard housing the manual controls, is located under the front of the appliance. It houses three components and all but one, the pilot selection, can be operated by the remote:

A. Accent Light Manual Control - For brightness adjustment. Your remote control turns the accent light ON/OFF.B. Two Position Pilot Selection: Push up for continuous pilot and down for GreenSmart Pilot.C. Battery back-up for power outages (also manual ON/OFF if you misplace your remote).All controls are clearly labeled with white silk-screened lettering for easy reading.

1 GreenSmart-TheSmarterWayToHeatYourHome

Turn Your Fireplace Xtrordinair Fireplace Into An Efficient Heat SourceOur GreenSmart™ fireplace inserts are designed to transform virtually any metal or masonry fireplace into an efficient source of heat. Traditional open fireplaces can have efficiency ratings up to 15% and can actually draw the heat out of your home for a net heat loss! Our gas inserts achieve efficiency ratings as high as 86% and may be used as a primary heat source in a mid-sized home.

Smarter DesignOur variety of beautiful faces, choice of surround panels and the optional reversible brick fireback give your fireplace insert a custom appearance that not only updates the style of any room, but makes your fireplace look like it was designed that way from the beginning.

Zone HeatUnlike a gas furnace that ducts heat to all rooms of your home, you can use your insert for zonal heating and just heat the room(s) you are using. Our remote also helps you save by maintaining a constant desired temperature, rather than burning fuel when not needed.

TechnologyThe patent-pending GreenSmart™ System is the most innovative collection of components, controls and technology that when combined provide an elegant, smarter and greener way to heat your home. Innovative standard features include: accent lights, flame adjustments and a choice of pilot settings. Your Fireplace Xtrordinair gas fireplace insert comes standard with the GreenSmart remote. This remarkable controller allows you to run the fireplace in “Smart Thermostat Mode” that automatically adjusts the heat output based on the temperature setting you’ve chosen. That means the flame will modulate up/down as opposed to shutting off/on like normal thermostats. This conserves fuel and maximizes heating ability while extending the viewing pleasure of the fire.

BA C

Open

Drop Down Concealment DoorThe control valve and wires are hidden by our drop down concealment door to provide an elegant, finished appearance so your beautiful face is the focal point, not the controls. The concealment door conveniently opens and closes for easy access to the controls. if you decide to adjust the accent light or change your pilot setting.

Closed

www.fireplacex.com2

GreenSmart Fuel and Cost $avingsExample: A standing pilot uses .552 therms of gas each day. The average therm of natural gas is $1.10, or $0.60 to run every day - no matter if the gas appliance is on or off. 365 days of standing pilot usage equates to 201 therms of gas or $219. Propane can run up to three times this cost. The GreenSmart System helps you save on both energy usage and your heating bill.

This switch allows you to run your fireplace in either continuous pilot mode - where the pilot flame continually stays on, ideal during periods of extreme cold when maintaining a warm flue ensures reliable operation – or for maximum efficiency use the GreenSmart mode, where the pilot flame ignites via an intermittent pilot (IPI) spark that does not run continually and thus conserves energy when the fireplace is not being operated. The GreenSmart system includes an automatic battery back-up, ensuring proper ignition even during power outages.

Choice of Pilots - Continuous Pilot or GreenSmart Pilot:

Comfort Control™ Features:With the push of a button on your standard remote the Comfort Control will turn off the rear burner while leaving the front burner on for an attractive flame appearance when less heat output is the priority. This feature along with the self-modulating front burner in GreenSmart thermostat mode delivers a turn-down ratio of up to 72 percent! It works with the Green-Smart split-flow burners, and offers a more efficient way to heat the room by only burning the correct amount of fuel to keep a constant temperature; so this is another smarter, greener way to enjoy fire in your home.

The innovative hand-held GreenSmart remote allows you the ease of controlling your GreenSmart insert from the comfort of your chair. The remote is designed to sit on a nearby coffee table or you can mount it on the wall with the included wall holster. On your GreenSmart remote first select your method of heat; manual control (A), standard thermostat setting (B) or the “SMART” thermostat setting (C). Once that’s been selected you may adjust the fan setting, including on or off, turn on or off your accent light and turn on or off your back burner depending on the season and your heating needs.

GreenSmart Remote Control Standard:

(C) In the “SMART” thermostat setting your insert will automatically adjust your flame height/heat output based on the temperature you’ve selected. The flame will automatically modulate from low to high, or high to low to achieve and then maintain the set temperature. This feature conserves fuel and maintains a more consistent heat in your home while allowing you to enjoy the flame longer. The flame will only shut off if your set temperature is exceeded.

Control Panel LightingWhen the concealment door is opened, control panel lighting is automatically turned on to make controls on the dashboard easy to see even in a low light environment in your home.

(A) In the manual setting you will manually adjust the flame height/heat output of the insert and manually turn the insert on and off.

(B) In standard thermostat mode you manually adjust the flame height/heat output of the insert to desired setting and then select the temperature setting you want to maintain in your room. The insert will then heat up to the set temperature you’ve selected, then cycle on and off to maintain this temperature.

3 GreenSmart-TheSmarterWayToHeatYourHome

How It Works

Is It A Wood or Gas Fire?Patented Ember-Fyre™ Burner TechnologyWe feature the patented Ember-Fyre™ burner system in both the 32 DVS and 34 DVL gas fireplace

inserts. Popular Science® magazine awarded the prestigious “Best of What’s New” awarded to the Ember-

Fyre as one of the year’s top achievements in Science and Technology. The combustion system delivers

an efficiency up to 82.2%. There are no unsightly burner tubes or metal pans and the appearance of the

fire and glowing embers are just as beautiful on the low flame setting as they are on high. The level of

realism is so remarkable it is difficult to tell it apart from our wood burning appliances.

Natural gas or propane is piped to a sophisticated SIT™ IPI gas valve. This gas burner is designed to provide reliable, continuous operation even if the power goes out in your home. If the power goes out it automatically switches to the built-in battery back-up and back to the house-hold circuit when the power comes back on.

The low-pressure gas flows to a precisely engineered burner orifice.

A hidden mixing tube mixes the gas with outside air. The standard mix is set by the installer to compensate for variations in altitude, fuel type, installation and line pressure.

The gas/air mixture flows through a unique array of burner ports in the ceramic base, where it ignites and burns.

As the Ember-Fyre burner heats to a deep red 1200° Fahrenheit, it mimics the look of glowing wood embers and charred logs. Dancing yellow flames further enhance the look and feel of a real wood fire.

The fire passes over the hand-carved logs that are so incredible detailed, you’ll be amazed they are not wood.

For hands-free operation the standard GreenSmart remote control allows you to set and maintain the comfort level of your home.

65

34

2

1

7

1

2

3

4

5

6

7

Optional Firebacks and Liners

With Accent Light OFF With Accent Light ON

Common Brick Herringbone Brick

ReversibleBrickFirebacksAll inserts feature a standard black interior, or you have the option of adding a realistic ceramic brick fireback that looks like real masonry brick. The firebacks are reversible and offer you the choice of common brick on one side or flip it over for the herringbone brick pattern.

32 DVS - 96100100 34 DVL - 96100150

www.fireplacex.com4

Accent LightsAccent Lights are a standard feature in both GreenSmart inserts. The lights add a warm glow to both the logs and optional ceramic fireback and can be used when the fire is on or off. Perfect as a nightlight or soft indirect light for the room, the Accent Light allows visual enhancement of your fireplace 365 days a year.

Optional Insert Wiring KitIf you do not want the fan power cord running across your hearth, consider using the optional Fan Wiring Kit which allows you to hard-wire the standard fan’s electrical connection within your existing fireplace.

Brushed Stainless Steel LinerFor a contemporary look to your fire, you have the option of adding the brushed stainless steel interior liner. The brushed stainless steel reflects the fire like a mirror and gives a multiple dimension and presentation of the fire.

32 DVS - 96100112 34 DVL - 96100158

5 ClassicFaceCollection

The original Classic Arch™ Faces are available for both our 32 DVS and 34 DVL gas fireplace inserts. The graceful arch opening that frames the fire viewing area is complemented by a parallel arch face. This combination of curves has a timeless appeal and universal application to a wide range of architectural styles.

The delicate heat exchange grills have the appearance of woven lace, a design departure from the horizontal bars of the average fireplace. The beautiful parallel arch appearance and fine detail of this face have become a unique trademarked characteristic of Fireplace Xtrordinair.

32 DVS Face Dimensions: 30” wide x 22” high34 DVL Face Dimensions: 34-3/4” wide x 26-1/2” high

Classic Arch Face, shown in black painted finish.

32 DVS Face 9850050634 DVL Face 98500512

Classic Arch Face, shown in brushed nickel finish.

32 DVS Face 9850050134 DVL Face 98500511

Detail of the delicate Classic Arch heat exchange grill.

Classic Arch™ black painted face with arched 8” panels, herringbone brick fireback and insert wiring kit.

The Metropolitan™ Face may be installed on both the 32 DVS and 34 DVL Fireplace Xtrordinair inserts. This face design features the same beautiful grill work of the Classic Collection, but in a more linear, retro style. The beveled edges of the Metropolitan face also create an intriguing, three-dimensional appearance. Change the look of the black Metropolitan face with any “Stove Bright®” paint color to compliment your decor.

32 DVS Face Dimensions: 30” wide x 22” high34 DVL Face Dimensions: 34-3/4” wide x 26-1/2” high

This sitting room features the Metropolitan face in metallic black on a 34 DVL insert with optional firebrick and insert wiring kit.

The customized inside-fit insert panels compliments the beauty of your existing fireplace opening.

Close-up of the intricate grill design and beveled edge of the Metropolitan.

Metropolitan face, available in the metallic black paint or brushed nickel plated finish.

Metallic Black Paint32 DVS Face 9850050534 DVL Face 98500514

Brushed Nickel Plated32 DVS Face 9530021434 DVL Face 95300614

www.fireplacex.com6Metropolitan™FaceCollection

The Artisan™ Face design and craftsmanship are reminiscent of the ironwork found in the Great Lodges of Europe and America. The Artisan face is hand-forged and hammered by master blacksmiths. Each face bears unique, subtle characteristics from the hands of its creator, making it an individual work of art in iron.

A convection chamber, which circulates heated room air around the appliance is concealed by a delicate, forged air intake and hot air return grill. Variations in the hand-forged metal texture will create an infinite variety of firelight reflections, whether you choose New Iron paint, hand-rubbed antique nickel, or the antique copper finish.

This reading room features the Artisan, in New Iron paint finish, on a 32 DVS fireplace insert and is accented by the arched panels, optional brick fireback and insert wiring kit.

32 DVS Face Dimensions: 30” wide x 22” high 34 DVL Face Dimensions: 34-3/4” wide x 26-1/2” high

New Iron painted finish32 DVS Face 98500507 34 DVL Face 98500630

Antique Nickel plated finish32 DVS Face 98500509 34 DVL Face 98500632

Antique Copper plated finish32 DVS Face 98500508 34 DVL Face 98500631

7 Artisan™FaceCollection

www.fireplacex.com8FrenchCountry™FaceCollection

During the Nineteenth Century a design period evolved known as French Country. This was a departure from the more formal French Baroque to a simple, warmer selection of details and materials. Our French Country™ Face is a beautiful representation of this design.

The French Country face features a rich, hand-rubbed antique 24 karat gold finish and is available in both rectangular and arched designs. The French Country arch design is also available in black paint finish.

32 DVS Face Dimensions: 29-7/8” wide x 22-3/4” high34 DVL Face Dimensions: 33-5/8” wide x 27-7/8” high

Rectangular Faces Gold32 DVS Face 9530020034 DVL Face 95300600

Arched Faces Black32 DVS Face 9530020634 DVL Face 98500602

This living room features the French Country Arch Face with optional arched insert panels, optional herringbone brick fireback and insert wiring kit.

Arched Faces Gold32 DVS Face 9530020534 DVL Face 98500525

9 ArchitecturalDoubleDoorCollection

Architectural&ArtisanDoubleDoorsThe DVS/DVL GSR gas insert double door faces are intended to cover the most common sizes of fireplace openings, eliminating the need for surround panels and giving your insert the look of a custom fireplace. Double Doors come in two styles, the Architectural Double Doors or the Artisan Hand-Hammered Double Door. Two sizes of backing plates are available for each insert. The black painted Architectural double doors fit either of the backing plates and are available as arched or rectangular shapes.

The Architectural Double Doors may be used by themselves or with one of three decorative onlay options. Matching accent plates are also available for the space above the doors if desired on the large backing plate as shown above.

This den features the DVL GSR Insert with black painted Architectural double doors, large backing plate, optional black Accent Plate above the doors, herringbone brick fireback option and insert wiring kit.

www.fireplacex.com10

With Large Backing PlateWith Small Backing Plate

Architectural Double Doors come standard in a Black Painted Finish

Artisan Onlay in an Antique Nickel Finish

Classic Onlay in an Antique Bronze Finish

Arts & Crafts Onlay in an Antique Copper Finish

Black Painted Double Doors

Add the option of antique plated onlays as shown below.

Rectangular Double Doors Arched Double Doors

DVS DBL Door Rect. 95300397

DVL DBL Door Rect. 95300798

DVS DBL Door Arch 95300395

DVL DBL Door Arch 95300796

DVS Artisan Onlay Rect. - 96300711

DVL Artisan Onlay Rect. - 96300731

DVS Artisan Onlay Arch - 96300701

DVL Artisan Onlay Arch - 96300721

DVS Classic Onlay Rect. - 96300710

DVL Classic Onlay Rect. - 96300730

DVS Classic Onlay Arch - 96300700

DVL Classic Onlay Arch - 96300720

DVS Arts & Crafts Onlay Rec. - 96300712

DVL Arts & Crafts Onlay Rec. - 96300732

DVS Arts & Crafts Onlay Arch - 96300702

DVL Arts & Crafts Onlay Arch - 96300722

DVS Artisan Door - 95300390

DVL Artisan Door - 95300790

DVS Small Backing Plate - 95100060

DVL Small Backing Plate - 95100065

DVS Large Backing Plate - 95100061

DVL Large Backing Plate - 95100066

Artisan Hand-Hammered Double Doors come standard in Charcoal Paint Finish Double Doors

DoubleDoorBackingPlatesTheArchitectural andArtisanDoubleDoors for theDVS andDVLgasinsertsdonotusethestandardrectangularorarchedfinishpanelsshownonpage10.Instead,thesefacesattachtobackingplatesthattaketheplaceofthepanels.Thisgivestheimpressionthattherearenopanelsontheinsertandgivesyouatruefireplacelook.TheBackingPlatescomeintwosizetofitalmostallfireplaceopenings.Ifyourequiretheuseofthelargebackingplate,adecorateAccentTrimcanbeaddedtogiveamorefinishedlooktoyourinsert.Ifyourequireanevenlargerpanelcoverageareayoucantheninstallthelarge10”x13”panelsetsbehindtheBackingPlate.

LargeBackingPlatewithoptionalAccentTrim

SmallBackingPlate

11 UniversalFace/Panel

Universal Face/PanelBoth 32 DVS and the 34 DVL have the option of adding the economical finish Universal Face. The Universal finish face is unique in the fact that it combines both the face and panel in one simple, clean look.

32 DVS Large Universal Face - 95100051Dimensions: 40” wide x 29” high

34 DVL Large Universal Face - 95100056Dimensions: 44” wide x 33” high

32 DVS Small Universal Face - 95100050Dimensions: 37” wide x 23” high

34 DVL Small Universal Face - 95100055 Dimensions: 40” wide x 27” high

This beach home features the DVL GSR Insert with large black painted Universal face/ with optional brushed stainless steel interior.

The Universal face is available in black paint finish and comes in two different sizes to accommodate most fireplace openings.

Finishing Your Fireplace InsertInsert panels are used to close off the opening of your fireplace when installing a gas insert. Fireplace Xtrordinair offers a choice of four looks.

FinishingYourFireplaceInsert

8” x 10” Arched PanelThis option offers the graceful arched upper panel, which adds a desirable element to many installations. To ensure coverage of the fireplace opening, consideration must be made to account for the radius of the top panel.

32 DVS 34 DVL

RectangularPanelsTheRectangularPanelSystemisavailableinthreesizesandisthemostversatile.

32DVS4”x6” 32DVS8”x10” 32DVS10”x13”

34DVL4”x6” 34DVL8”x10” 34DVL10”x13”

98500605 98500608

961003009610030196100302

961003209610032196100322

Inside-Fit PanelsYou can modify (cut-down) any of the standard rectangular panels to fit the inside opening of your fireplace. This allows you to showcase your original fireplace finish and the fireplace face.

Lower Zero Clearance PanelDesigned to be used with both Rectangular and Arched panel systems, this lower panel offers a finished appearance to your installation when the existing fireplace opening is elevated above the floor. This panel can be cut to size and will cover up to 7” below the insert.

32 DVS & 34 DVL 98500619

AB

C

G

F D

E

H

I

Sizing Your Fireplace For An InsertBefore visiting your Fireplace Xtrordinair dealer, answer these helpful questions.

1. What purpose will the fireplace insert fill? a) Zonal or Supplemental Heating OR b) Whole Home Heating

2. What room or rooms (determine 2. square footage) will the insert be used to heat?

3. Do you have natural gas or propane; 2. and has it been piped to the fireplace?

4. Is the fireplace of Masonry or Zero 4. Clearance (Metal) construction?

It would be helpful to jot down these basic measurements. Your hearth professional can assess your installation, and help select the correct fireplace insert for your heating needs.

Your Fireplace MeasurementsA = Opening Height

B = Width in Front

C = Width in Back

D = Depth of Fireplace

E = Hearth to Mantle

F = Hearth to Combustible Facing

G = If the fireplace is raised above the hearth, what is the distance from the hearth to the fireplace opening?

H = Width of Hearth

I = Depth of Hearth

________________________________________

________

________________________ Bottom Panel Only

www.fireplacex.com12

32 DVS Large Universal Face - 95100051Dimensions: 40” wide x 29” high

34 DVL Large Universal Face - 95100056Dimensions: 44” wide x 33” high

Installing a Fireplace Insert In a Metal or Masonry Fireplace

The first step is determining whether you have a metal (zero clearance) or masonry fireplace. Metal fireplaces can be altered by professionals to accommodate Fireplace Xtrordinair inserts. Your Fireplace Xtrordinair Design Center Professional can help if you need it. They will also provide you with your new air intake system and exhaust vent liners. It is important that this work is done by a hearth professional.

Next determine which insert is best for your home based on size and your heating requirements. Again, your Design Center Professional can help.

Model 32 DVS GSR - Heating Capacity: Up to 1,500 sq. ft., BTU Input: Up to 31,000 BTUs/Hr. Model 34 DVL GSR - Heating Capacity: Up to 2,000 sq. ft., BTU Input: Up to 40,000 BTUs/Hr.

Choose the correct size and preferred style of insert panel.

Select a face design and optional firebrick and you are ready to enjoy your new efficient gas insert by Fireplace Xtrordinair!

If you do not want the fan power cord running across your hearth, consider using the optional Fan Wiring Kit which allows you to hardwire the fan’s electrical connection within your existing fireplace.

1 2 3 4

1

3

4

Masonry or Zero Clearance Metal

Fireplace

Select the DVS or DVL Fireplace Insert

Choose Size and Type of Panel

Add Your Face Selection

13 InstallingYourFireplaceInsert

2

Fireplace Inserts 32 GSR Direct Vent Small 34 GSR Direct Vent Large

Specifications The dimensions and clearances on this page are for reference only. Refer to the Owner’s Manual prior to installation.

HeightWidthinFrontWidthinBackDepthFlexVentDiameterUnitWeightBurnerSystemGlassArea(willvaryslightlywithfacedesign)

PowerfulFans

HeatingCapacity*BTUInput(NG)BTUInput(LP)OverallEfficiency*(maximumventconfiguration)OverallEfficiency*(minimumventconfiguration)

Performance *Gas appliance performance can be affected by negative pressure in the home and by prevailing atmospheric conditions. Contact local building or fire officials about restrictions and installation requirements in your area.

1 = Floor to Mantle 35”*

2 = Floor to Top Facing 35”

3 = Insert to Sidewall 4-1/2”

4 = Insert to Side Facing 4-1/2”

5 = Extension onto Hearth 1-1/4”

6 = Hearth Not Required 0”

* maximum 12” mantle depth

ClearancesToCombustibles Installation information is available at your local Fireplace Xtrordinair dealer or online at www.fireplacex.com

1 = Floor to Mantle 35-1/2”*

2 = Floor to Top Facing 35-1/2”

3 = Insert to Sidewall 4”

4 = Insert to Side Facing 4”

5 = Extension onto Hearth 1-1/4”

6 = Hearth Not Required 0”

* maximum 12” mantle depth

Note:1 & 2 measured from floor.

3 & 4measured from side of unit.

Panel Sizes Measurements for each panel is for maximum fireplace opening coverage - Panels not needed on Architectural Double Door Faces.

Arched 8” sides x 10” top

Rectangular 4” sides x 6” topRectangular 8” sides x 10” topRectangular 10” sides x 13” top(all can be trimmed for inside fit of fireplace opening)

Testing & Installation Information

Tested and Certified by OMNI-Test Laboratories Inc. to ANSI Z21-88a-2003, applicable sections of UL307b-1995Note: Improper installation of your gas appliance or failure to operate it in accordance to the guidelines detailed in the Owner’s Manual may negate your warranty and

endanger your home and family. Installation information is available on our website at www.fireplacex.com.We recommend all Fireplace Xtrordinair appliances be installed and maintained on an annual basis by your Specialty Hearth Retailer.

19-1/2”26-1/2”18”15-1/8”3” Exhaust - 3” Air Intake115 lbs.Ember-Fyre™352.5 square inches

YES - 180 CFM

23-3/4”31-1/2”20”14-1/2”4” Exhaust - 3” Air Intake135 lbs.Ember-Fyre™518.38 square inches

YES - 180 CFM

Up to 1,500 square feet31,000 (high) - 10,700 (low)31,000 (high) - 12,600 (low)85% (NG) 85.5% (LP)80% (NG) 80.5% (LP)

Up to 2,000 square feet40,000 (high) - 11,900 (low)40,000 (high) - 7,400 (low)84% (NG) 86% (LP)79.3% (NG) 81.2% (LP)

40-3/8” w x 23-1/2” h at side of arch28-7/8” h at top of arch

37-1/8” w x 25” h40-3/8” w x 28-7/8” h44-3/8” w x 31-7/8” h

44-3/16” w x 28-1/4” h at side of arch33-3/8” h at top of arch

40” w x 29” h44-3/16” w x 33-3/8” h48-3/16” w x 36-3/8” h

3

2

6 5

www.fireplacex.com14

1

4

Photos and illustrations are for descriptive purposes only. We reserve the right to improve or change our products without prior notification. Trademarks belong to Travis Industries, inc. Consult the Owner’s Manual for complete installation requirements. © Copyright T. I. 2010/6 - Printed in the U. S. A.

SeeourcompletelineoffireplacesVisitusonline:www.fireplacex.com

WarrantyYour Gas Fireplace Insert is backed by a network of Specialty Hearth Dealers and certified factory trained Installers. Fireplace Xtrordinair warrants our products to be free from defects in material and workmanship for a period of 7 years from date of purchase. All parts, electronics, and labor are covered for a full 2 years. No other manufacturer’s warranty can compare.

Additional Fireplace Xtrordinair ProductsIf you are in the market for other hearth products, Fireplace Xtrordinair manufactures a full line of wood, gas and electric fireplaces and electric and wood burning fireplace inserts.

Electric Fireplaces

Wood Burning Fireplaces

Gas Fireplaces

If you are interested in the latest trend in fireplace design, Fireplace Xtrordinair’s Revolution™ Clean Face fireplace offers the look of a traditional open fireplace without grills or louvers. These fireplaces operate with the efficiencies and performance of a gas furnace.

If you prefer heating with wood, Fireplace Xtrordinair also manufac-tures a line of EPA Certified clean burning fireplaces that feature the remarkable Posi-Pressure complete home heating system.

Fireplace Xtrordinair offers a complete line of heater rated gas fireplaces in both landscape and portrait-style designs. There are Fireplace Xtrordinair gas fireplaces in many sizes and for every heating need.

Clean Face Gas FireplacesThe Fireplace Xtrordinair 564E Electric Fireplace offers the convenience of adding a fireplace to any room within your home. With no venting required, installation can be completed in as little as one hour. The 564E offers a selection of finish faces to match any home decor.

Tempest Torch™

Illuminations ™

The Tempest Torch outdoor gas lamp is designed to create the ultimate in lighting enhancement. The patent pending Tempest Torch creates a natural venturi effect causing the flame to spiral and dance within the tempered glass walls without the use of electricity.

The Illuminations™ Electric Fireplace is a breakthrough product designed to mimic the beauty of real burning candles. With a flick of a light switch or remote control, add ambiance and light without the mess or safety issues of candles. These fireplaces can be installed either single-sided or as a see-thru units.