GlobusDataTransferSoftware

QuickStartGuideCarlNegro

NRAMM– SEMC– NYSBC

08/28/2017

Register

1)Navigatetohttps://www.globusid.org/create

2)RegisterforaGlobusIDaccount

- Theusernameisnotimportant

- Emaildoesnothavetobeinstitutional,justvalid

- Makesuretocheckthe“non-profit”option!

Verify3)Checkyouremailaddressfortheverificationemail.

- Ifnoemail:a)checkspamfiltersb)makesureemailaddressiscorrect

4)Click“VerifyYourEmail-Address”ontheGlobusID website5)Copy/pastetheverificationcodeandclick“Verify”

LogIn

• 6)Nagivate toglobus.org,click“Login”

• 7)Click“useGlobusIDtosignin”

• 8)EnteryourGlobusID usernameandpassword

CreatePersonalEndpoint

9)Click“Endpoints”

10)Click“addGlobusConnectPersonalendpoint

CreatePersonalEndpoint11)Selectanameforyourpersonalendpoint

- e.g.“Laura’smacbook”

12)Click“GenerateSetupKey”

13)Copythesetupkey.

14)Followtheinstructionsin“Step2”todownloadandinstalltheGlobusConnectPersonalclient.

- Theclientcanbeinstalledonanylaptoporworkstationwithaninternetconnection.

15)LaunchtheGlobusConnectPersonalfromyourdesktop.Whenprompted,pastethesetupkeyintothetextfieldandClick“Ok”.

SelectDestinationPath

16)Returntothehttp://globus.org orclick“TransferFiles”onthepreviouspage.

17)Clicktheempty“Endpoint”boxOntheright-handside.18)Select“AdministeredbyMe”andclicktherecently-createdendpoint.Youshouldseeyoursystem’sfilestructure.19)Selectadestinationpathinoneofyoursystem’sdirectories.

SelectDestinationPathOPTIONAL:IfyouwouldliketotransfertoaUSBharddrive connectedtoyourlaptoporaworkstation,dothefollowing:

i)Navigatetothe“Preferences”sectionofyourGlobusPersonalConnectclientii)Click“Access”.Selectthe“+”plussignatthebottomleftcorner.iii)PlugyourUSBharddrive intothelaptoporworkstationandmakesureitisrecognizedbytheoperatingsystem.Selectthedriveandclick“Open”orthecorrespondingbuttoninyouroperatingsystem.iv)MakesuretheUSBharddrive appearsinthe“AccessibleDirectoriesandFiles”listwith“Writeable”selected.v)Inthe“TransferFiles”page,youshouldnowseeanadditionaldirectorythatpointstotheUSBharddrive mountedonthelaptoporworkstation.vi)SelectadestinationfolderonthemountedUSBharddrive.

NOTE:Ifyouaresettingupyourdatatransferathttp://globus.org onthesamemachinethattheUSBharddrive isconnectedto,youcannotshutdownthecomputerorthetransferwillbreak.Ifyouareusingadifferentmachine,youcanclosedownthecomputer.(I.E.don’tshutdownthecomputerthatthedataistransferringto)

i)ii)

iii) iv)

v) vi)

SelectSourceEndpoint

20)Selecttheempty“Endpoint”boxontheleftside.21)Type“nysbc”intotheboxnextto“Endpoint”.22)Theoption“NYSBC– SEMC”shouldbeavailable.Verifythatownerintheresultsisnysbc@globusid.org andselectit.23)EnteryourNYSBC Linuxusernameandpasswordwhenprompted.

SelectSourcePath

24)Ontheleftyoushouldnowseeafilesystemwiththe/~/gpfs asthetopmostdirectory.25)Navigatetothedirectoryin/gpfs/frames,/gpfs/appion,or/gpfs/leginon youwouldliketotransfer.

e.g.~/gpfs/frames/lkim/17aug15f

26)Yourscreenshouldlooksimilartothis:

BeginTransfer

27)Selectausefullabelforthedatatransfersession

28)Click“sync– onlytransferneworchangedfiles”withthe“checksumisdifferent”option.Thiswillensurethatifyoucollectmoredataandre-runthetransfer,Globuswillonlytryandtransfernewdata.

Optionally,select“preservesourcefilemodificationtimes”29)Clickthebluearrowpointingtotherighttobeginthetransfer

LetDataTransfer

30)Verifythatdataisbeingtransferredtoyourdestinationfolder

31)Youcancheckthestatusofyourtransferbyclicking“Activity”onthemainGlobustransferpageNOTE:Syncingwillonlytransferdatapresentatthetimethetransferbegins,itwillnottransferfilescollectedlaterinadatacollection.Ifyoucollectmoredata,youmustrerunthetransfer.Pleaseonlyuseoneactivetransfersessionatatime.

TransferComplete

Youshouldreceiveanemailwhenyourdataisfinishedtransferring: