Upload
hoan-duc
View
221
Download
0
Embed Size (px)
Citation preview
8/8/2019 Giai de Thi Mang 1
1/28
Bn quyn thuc v : class07ct113.com
Question1
Refer to the exhibit. What function does router RT_A
need to provide to allow Internet access for hosts inthis network?
Chn mt phng n tr li.
address translation
DHCP services
web server
ftpd
Question2Refer to the exhibit. Which list refers only to end
devices?
Chn mt phng n tr li.
Design by anhpro
8/8/2019 Giai de Thi Mang 1
2/28
Bn quyn thuc v : class07ct113.com
A,D,E,G
A,D,E,F
A,H,B,C
D,E,F,G
Question3Refer to the exhibit. A PC is connected to a network.Which action will verify that the PC can communicatewith its default gateway?
Chn mt phng n tr li.Use the ipconfig command.
Use the ping 10.0.0.254 command.
Use the ipconfig/all command.
Use the ping 127.0.0.1 command.
Question4
During the encapsulation process, what identifiersare added at the transport layer?
Chn mt phng n tr li.source and destination IP addresses
Design by anhpro
8/8/2019 Giai de Thi Mang 1
3/28
Bn quyn thuc v : class07ct113.com
source and destination MAC addresses
source and destination channel identifiers
source and destination port numbers
Question5Refer to the exhibit. The tracert command is initiatedfrom PC1 to PC4. Which device will send a responseto the initial tracert packet from PC1?
Chn mt phng n tr li.London
Athens
Ankara
PC4
Paris
Question6A network technician has made a UTP cable that isterminated as T568A on one end and T568B on theopposite end. What type of cable has beenconstructed?
Chn mt phng n tr li.crossover
Design by anhpro
8/8/2019 Giai de Thi Mang 1
4/28
Bn quyn thuc v : class07ct113.com
straight-through
console
patch
Question7Refer to the exhibit. Host A is configured with the correct IP address for the default
gateway of the router R1 FastEthernet0/1 interface. How will a packet that is sent fromhost A to host B be handled by the devices on the network?
Chn mt phng n tr li.R1 will forward the packet to its default gateway, the next hop router R2. R2 will drop the packeroute that is learned by a routing protocol to network 10.1.1.0/24.
R1 will drop the packet because R1 does not have a specific route in its routing table to the 10.1.
R1 will forward the packet to its default gateway, the next hop router R2. R2 will forward the pa
connected network 10.1.1.0/24.
R1 will forward the packet to its default gateway, the next hop router R2. R2 will drop the packedefault route to network 10.1.1.0/24.
Question8Refer to the exhibit. While configuring a network, atechnician wired each end of a Category 5e cable asshown. Which two statements are true about thissetup? (Choose two.)
Design by anhpro
8/8/2019 Giai de Thi Mang 1
5/28
Bn quyn thuc v : class07ct113.com
Chn t nht mt cu tr liThe cable is terminated in a way that the transmit pin is wired to the receive pin.
The cable simulates a point-to-point WAN link.
The cable is suitable for connecting a switch to a router Ethernet port.
The cable is suitable for connecting dissimilar types of devices.
The cable is unusable and must be rewired.
Question9Refer to the exhibit. Which layered network model isshown in the diagram?
Chn mt phng n tr li.IETF
OSI
Cisco
Design by anhpro
8/8/2019 Giai de Thi Mang 1
6/28
Bn quyn thuc v : class07ct113.com
TCP/IP
Question10Refer to the exhibit. A host is connected to hub 1.
Which combination of IP address, subnet mask, anddefault gateway can allow this host to function in thenetwork?
Chn mt phng n tr li.IP address: 172.16.31.29 Subnet mask: 255.255.255.240 Default ga
IP address: 172.16.31.29 Subnet mask: 255.255.255.248 Default ga
IP address: 172.16.31.36 Subnet mask: 255.255.255.240 Default ga
IP address: 172.16.31.37 Subnet mask: 255.255.255.224 Default ga
IP address: 172.16.31.63 Subnet mask: 255.255.255.224 Default ga
IP address: 172.16.31.32 Subnet mask: 255.255.255.224 Default ga
Question11
Refer to the exhibit. Host A is able to access resources on the local LAN but is unable toaccess any resources on the Internet. What is the likely cause of this problem?
Design by anhpro
8/8/2019 Giai de Thi Mang 1
7/28
Bn quyn thuc v : class07ct113.com
Chn mt phng n tr li.The host address is a network address.
The default gateway is on a different subnet from the host.
The host subnet mask in incorrect.
The network uses private addresses.
Question12Refer to the exhibit. A network technician is trying to determine the correct IP address
configuration for Host A. What is a valid configuration for Host A?
Chn mt phng n tr li.IP address: 192.168.100.22; Subnet Mask: 255.255.255.240; Default Gateway: 10.1.1.5
Design by anhpro
8/8/2019 Giai de Thi Mang 1
8/28
Bn quyn thuc v : class07ct113.com
IP address: 192.168.100.30; Subnet Mask: 255.255.255.240; Default Gateway: 192.168.1.1
IP address: 192.168.100.20; Subnet Mask: 255.255.255.240; Default Gateway: 192.168.100.17
IP address: 192.168.100.19; Subnet Mask: 255.255.255.248; Default Gateway: 192.16.1.2
IP address: 192.168.100.31; Subnet Mask: 255.255.255.240; Default Gateway: 192.168.100.18
IP address: 192.168.100.21; Subnet Mask: 255.255.255.248; Default Gateway: 192.168.100.18
Question13Refer to the exhibit. Assume all devices are using default configurations. How manysubnets are required to address the topology that is shown?
Chn mt phng n tr li.4
5
1
3
7
Question14Which three IPv4 addresses represent subnetbroadcast addresses? (Choose three.)Chn t nht mt cu tr li
Design by anhpro
8/8/2019 Giai de Thi Mang 1
9/28
Bn quyn thuc v : class07ct113.com
192.168.4.221 /27
192.168.4.63 /26
192.168.4.129 /26
192.168.4.95 /27
192.168.4.51 /27
192.168.4.191 /26
Question15Which option shows how a router will route packetsto a remote network?
Chn mt phng n tr li.
Question16
Design by anhpro
8/8/2019 Giai de Thi Mang 1
10/28
Bn quyn thuc v : class07ct113.com
An organization has been assigned network ID10.10.128.0 and subnet mask 255.255.224.0. WhichIP address range can be used for this organization?Chn mt phng n tr li.
10.10.128.0 to 10.10.192.255
10.10.128.0 to 10.10.160.255
10.10.128.0 to 10.10.0.159
10.10.128.0 to 10.10.159.255
10.10.128.0 to 10.10.159.0
Question17Refer to the exhibit. All devices in the network usedefault configurations. How many broadcast domainsare there in this topology?
Chn mt phng n tr li.7
11
5
9
Design by anhpro
8/8/2019 Giai de Thi Mang 1
11/28
Bn quyn thuc v : class07ct113.com
3
Question18When connectionless protocols are implemented at
the lower layers of the OSI model, what is usuallyused to acknowledge that the data was received andto request the retransmission of missing data?Chn mt phng n tr li.
Ethernet
a connectionless acknowledgement
UDP
an upper-layer, connection-oriented protocol or service
IP
Question19Refer to the exhibit. What three statements are true about the IP configuration that isshown? (Choose three.)
Chn t nht mt cu tr liThe network of this computer can have 126 hosts.
The computer is unable to communicate outside of the local ne
The address that is assigned to the computer represents private
Design by anhpro
8/8/2019 Giai de Thi Mang 1
12/28
Bn quyn thuc v : class07ct113.com
The IP address that is assigned to the computer is a broadcast a
The IP address that is assigned to the computer is routable on t
The prefix of the computer address is /27.
Question20Which two types of media can provide bandwidth upto 1 Gb/s? (Choose two.)Chn t nht mt cu tr li
1000 BASE-TX
100 BASE-FX
10 BASE-T
100 BASE-T
1000 BASE-SX
Question21Refer to the exhibit. All routers in the network are configured with the correct IP
addresses and routing protocol. Host A sends a packet to host B. Which exhibited stepswill be executed on each of the routers in the network?
Chn mt phng n tr li.Router R1 executes all six steps. Router R2 executes steps 1,2,3,4, and 6.
Design by anhpro
8/8/2019 Giai de Thi Mang 1
13/28
8/8/2019 Giai de Thi Mang 1
14/28
Bn quyn thuc v : class07ct113.com
scanning a document with a directly connected scanner
using Telnet to access a router
Question24
Which TCP/IP model layer creates additionaloverhead on network resources due toacknowledgments, tracking, and retransmission ofdata?Chn mt phng n tr li.
transport
application
network access
internet
Question25What information is contained in the header of Layer3 to help data delivery?Chn mt phng n tr li.
virtual connection identifier
port number
device physical address
destination host logical address
Question26Which device should be used for enabling a host tocommunicate with another host on a different
network?Chn mt phng n tr li.
hub
switch
Design by anhpro
8/8/2019 Giai de Thi Mang 1
15/28
Bn quyn thuc v : class07ct113.com
host
router
Question27
Which combination of network id and subnet maskcorrectly identifies all IP addresses from172.16.128.0 through 172.16.159.255?Chn mt phng n tr li.
172.16.128.0 255.255.255.224
172.16.128.0 255.255.192.0
172.16.128.0 255.255.255.192
172.16.128.0 255.255.224.0
172.16.128.0 255.255.0.0
Question28
Refer to the exhibit. The router of the company failedand was replaced. After the replacement, hosts Cand D in the Education office are able to ping eachother, but they are unable to access the hosts in theAccounts office. What is the likely cause of theproblem?
Chn mt phng n tr li.The IP address at the fa0/0 interface of the router is incorrectly configured.
The hosts in the Accounts office are not on the same subnet as the hosts in the Education office
Design by anhpro
8/8/2019 Giai de Thi Mang 1
16/28
Bn quyn thuc v : class07ct113.com
The IP address at the serial interface of the router is incorrectly configured.
The subnet mask at the fa0/1 interface of the router is incorrectly entered.
Question29
What information can be gathered by using thecommand netstat?Chn mt phng n tr li.
the locally configured subnet mask
active TCP connections
the default gateway
the routing protocol
Question30A network administrator is asked to design a newaddressing scheme for a corporate network. Thereare 60 users in the main office, 40 users in thebranch office, 28 users in manufacturing, 12 in thesales office, and 4 users in the research office. WhichVLSM addressing scheme that uses the
192.168.88.0/24 network will fulfill the requirementswhile wasting the fewest addresses?Chn mt phng n tr li.
192.168.88.0/26 main
192.168.88.32/26 branch
192.168.88.64/26 manufacturing192.168.88.96/27 sales
192.168.88.128/28 research
192.168.88.0/27 main
192.168.88.64/28 branch192.168.88.80/28 manufacturing
192.168.88.96/29 sales
192.168.88.104/30 research
192.168.88.0/26 main
192.168.88.64/26 branch
192.168.88.128/27 manufacturing
Design by anhpro
8/8/2019 Giai de Thi Mang 1
17/28
Bn quyn thuc v : class07ct113.com
192.168.88.160/28 sales192.168.88.176/29 research
192.168.88.0/27 main
192.168.88.32/27 branch
192.168.88.64/28 manufacturing192.168.88.80/29 sales
192.168.88.88/30 research
Question31Refer to the exhibit. Which option correctly identifies the network address, range of host
addresses, and the broadcast address for the network that contains host A?
Chn mt phng n tr li.
Dap an dung
Design by anhpro
8/8/2019 Giai de Thi Mang 1
18/28
Bn quyn thuc v : class07ct113.com
Question32Refer to the exhibit. Host A uses router A as its default gateway. If host A sends an ICMP
echo request to 172.16.10.0, what ICMP response will host A receive.
Chn mt phng n tr li.source quench
destination unreachable
route redirection
echo reply
Question33Refer to the exhibit. Which type of network design is shown?
Chn mt phng n tr li.
Design by anhpro
8/8/2019 Giai de Thi Mang 1
19/28
Bn quyn thuc v : class07ct113.com
wide area
peer-to-peer
dedicated server
client/server
Question34Refer to the exhibit. A router, the table of which isshown, receives a packet that is destined for192.168.9.4. How will the router treat the packet?
Chn mt phng n tr li.It will forward the packet to 172.16.2.0
It will drop the packet.
It will forward the packet to the next hop address.
It will forward the packet via FastEthernet 0/1.
Question35A network technician is tasked with setting up anetwork for six users, but the users should be able touse their accounts to log on from any of the sixcomputers. What type of network should be used?
Design by anhpro
8/8/2019 Giai de Thi Mang 1
20/28
Bn quyn thuc v : class07ct113.com
Chn mt phng n tr li.
workgroup
client-server network
peer-to-peer network
P2P applications
Question36To send data through a network, what two flags areused to establish a session? (Choose two.)Chn t nht mt cu tr li
Ack #
Port #
CRC
SYN
ACK
Seq #
Question37Which statement is true about the ICMP protocol?Chn mt phng n tr li.
If a host does not respond to an ICMP echo request, the host is not functioning.
It is designed to make IP a reliable protocol.
It is an application layer protocol.
It is often filtered out of networks for security purposes.
Question38Which range of port numbers are reserved forservices that are commonly used by applications thatrun on servers?
Design by anhpro
8/8/2019 Giai de Thi Mang 1
21/28
8/8/2019 Giai de Thi Mang 1
22/28
8/8/2019 Giai de Thi Mang 1
23/28
8/8/2019 Giai de Thi Mang 1
24/28
Bn quyn thuc v : class07ct113.com
Chn mt phng n tr li.
10.1.192.1
10.1.192.2
10.1.192.54
192.31.7.1
Question45Refer to the exhibit. Which two layers of the OSI
model describe the same functions as the transportand internet layers of the TCP/IP model? (Choosetwo.)
Design by anhpro
8/8/2019 Giai de Thi Mang 1
25/28
Bn quyn thuc v : class07ct113.com
Chn t nht mt cu tr lidata link layer
session layer
network layer
physical layer
presentation layer
application layer
transport layer
Question46Which two functions of the OSI model occur at layertwo? (Choose two.)Chn t nht mt cu tr li
encoding
routing
physical addressing
cabling
media access control
Question47Refer to the exhibit. Each media link is labeled. What type of cable should be used to
connect the different devices?
Chn mt phng n tr li.
Design by anhpro
8/8/2019 Giai de Thi Mang 1
26/28
Bn quyn thuc v : class07ct113.com
Connection 1 - crossover cableConnection 2 - straight-through cable
Connection 3 - crossover cable
Connection 1 - straight-through cable
Connection 2 - crossover cableConnection 3 - straight-through cable
Connection 1 - straight-through cable
Connection 2 - crossover cable
Connection 3 - crossover cable
Connection 1 - crossover cable
Connection 2 - rollover cable
Connection 3 - crossover cable
Connection 1 - rollover cableConnection 2 - straight-through cable
Connection 3 - crossover cable
Question48Which of the following are the address ranges of theprivate IP addresses? (Choose three.)Chn t nht mt cu tr li
192.168.0.0 to 192.168.255.255
10.0.0.0 to 10.255.255.255
172.16.0.0 to 172.31.255.255
127.16.0.0 to 127.31.255.255
200.100.50.0 to 200.100.25.255
150.150.0.0 to 150.150.255.255
Question49Refer to the exhibit. Host A is requesting a web page
from the web server. Which option represents thesocket to which the request is made?
Design by anhpro
8/8/2019 Giai de Thi Mang 1
27/28
Bn quyn thuc v : class07ct113.com
Chn mt phng n tr li.
www.cisco.com
10.0.0.130
80
10.0.0.130:80
Question50Refer to the exhibit. A host is using NAT to connect
to the Internet. Which three IP addresses enable thisconnection? (Choose three.)
Chn t nht mt cu tr li
Design by anhpro
http://www.cisco.com/http://www.cisco.com/8/8/2019 Giai de Thi Mang 1
28/28
Bn quyn thuc v : class07ct113.com
10.1.1.2
10.1.1.60
10.1.1.37
10.1.1.39
10.1.1.32
10.1.1.63