Gg&g2012cat

7/16/2019 Gg&g2012cat

http://slidepdf.com/reader/full/ggg2012cat 1/111

Founded over 17 years ago GG&G has consistently set the quality and performance standard for the design and development of hard coretactical weapon accessories. Over that decade and a half GG&G has emerged as one of the most trusted brands in tactical weapon accessories.Countless civilian, law enforcement and military shooters worldwide have put our innovative products to the ultimate performance test--withoutfail. We sincerely thank them for their continued support and acknowledge, that without their suggestions, input and encouragement to developinnovative and creative solutions to tactical problems, we would not be manufacturing the 190 tactical accessories we do today.

In 2012 GG&G will continue its leadership role in developing innovative tactical weapon accessories with one of the most dominant productlines, sales and technical support staffs found anywhere in the world. GG&G not only designs, but manufactures ALL of its products in Tucson, Arizona using modern fabrication equipment and machinery. More than ever we are extremely proud that all of our productsare American Made by men and women proud to be Americans. All of our employees, from management to the men and women whomanufacture and assemble our products, are passionately devoted to provide the highest quality tactical accessories to support the tacticalendeavors of our customers worldwide.

Our mission statement is simple: Provide our customers the highest quality, innovative American Made tactical accessories in order tomaximize tactical exibility, durability and service life. We will continually improve our products and provide prompt professional customersupport in order to keep our customers that one decisive step ahead.

Desiges AD MAufAcues OfiOAie OpicAl MOuig syseMsAD AcicAl AccessOies

3602 e. 42nd stravn, on, Arzona 85713 • 800-380-2540 (fax) 520-748-7583Wb st: az.om e-ma: [email protected]

DOMINATING URBAN WARFARE

Made in America Deployed Worldwide

7/16/2019 Gg&g2012cat


gg&g is eeMely pOuD O hAesupplieD AcicAl AccessOies

to t mmbr o t oown dra,tat, and mna aw normnt an,mtar oranzaton and oman:

2

Alabama State TroopersAnchorage Police Dept.Anaheim Police Dept.Arizona Dept. of Corrections

Arizona Game & Fish Dept.Ashbury InternationalBend Oregon Police DepartmentBerwyn Police Dept.Beverly Hills Police Dept.BlackhawkBloomeld Hills Police Dept.Broward County S.O.Bureau of Alcohol Tobacco and FirearmsBureau of Narcotic Enforcement

California Dept of JusticeCentral Intelligence AgencyChicago Police DepartmentChristian County Sheriffs Dept.City of Long Beach Police Dept.City of South PasadenaCosta Mesa Police Dept.Cresthill, Illinois Police Dept.Cumberland Police Dept.Durham Regional Police

Eagle County Sheriffs Dept.East Baton Rouge Parish PoliceEscondido Police Dept.FNFederal Bureau of InvestigationFederal Protective ServicesHamilton County Park DistrictHeckler and KochHuron-Clinton Metro AuthorityHouston Police Dept.

Idaho National LaboratoriesITT Defense IndustriesKentucky State PoliceKentwood Police

L.A. County Sheriff’s Dept. S.E.P.Los Angeles Police Dept.Lewisville Police Dept.Livermore California Police Dept.Livonia Police Dept.Louisiana State PoliceMecklenburg County Sheriffs Dept.Mesa Police Dept.Metro Nashville Police DepartmentNaval Surface Warfare Center

NSW Developmental GroupN.Y.P.D. Special Weapons & TacticsOklahoma Co. S.O.Oro Valley Police Dept.Oregon State PolicePalm Beach County S.O.Pennsylvania State PolicePhoenix S.W.A.T.Phoenix Police Dept.Picatinny Arsenal

Pima County Sheriff’s Dept.Pueblo Police Dept.Rockhill Police Dept.Sahuarita Police Dept.San Bernadino County Sheriff’s Dept.San Francisco Police Dept.Sandia National LaboratoriesSanta Clara Police Dept.Sierra Vista Police Dept.Scottsdale Police Dept.

South Carolina State TroopersSpringeld, MO Police SRT

Tempe Police Dept. Tohono O’Odham Nation

Tucson Police S.W.A.T. Tucson Airport AuthorityLawrence Livermore LaboratoriesU.S. Army ARDEC TACOMU.S. Army RangersU.S. Army Night Vision LaboratoriesU.S. Army 10th Mountain DivisionU.S. Army A.M.U.U.S. Army SOCOMU.S. Air Force 55th Rescue Squadron

U.S. Air Force 355th Combat CommandU.S. Border ProtectionU.S. Border Protection BORTACU.S. Coast GuardU.S. CustomsU.S. Department of EnergyU.S. Drug Enforcement AdministrationU.S. Department of JusticeU.S. Department of StateU.S. Marine Corps Commandants

War Fighting LabU.S. Marine Corp DesignatedMarksman Program

U.S. Marine Corp Urban Warrior ProgramU.S. NavyU.S. Park ServiceU.S. Secret ServiceWackenhut CorporationWilmington North Carolina PDU.S. Marshall Service

7/16/2019 Gg&g2012cat


gg&gAiig cee AffiliAiOs

We have become one of the world’s acknowledged leaders in the design and manufacture of civilian, law enforcement and militaryoptical mounting systems and tactical weapon accessories for two reasons. First of all, the technical and tactical experience ofour staff of armed professionals is all-important. Secondly, our product line would never have reached its present pinnacle ofperfection without the continuing support and feedback we receive from rearms and tactical training centers and their highlyprofessional staffs. We’re gratied to have the following highly regarded training facilities use and endorse our products.

Almost anyone with the proper credentials can acquire a handgun or rie and GG&G tactical accessories. However, far more isrequired to insure that your opponent and not you go down like “an asphalt snow angel” should you be forced into a deadlyconfrontation. You will need more than just a little true grit to attend a course at any one of these training facilities. Your physicalendurance and emotional fortitude will probably be tested to their absolute limits. Only those who are really serious aboutsurvival end up on the ring line at any of GG&G’s training center afliates. Those looking beyond dry ring in their hallwaymirror should contact one of them ASAP.

gnt rann cntr2900 gnt oadpadn, AZ 86334-4301928-636-4565www.nt.om

ndr an96747 hw 140 eatlakvw, O 97630541-947-4104www.tndrrann.om

Warror soo8987 e. anq rd#309-245on, AZ 85749520-241-7690www.warroroo.om

Morran contnB Janp.O. Box 1125cno a, AZ 86323520-636-1329

www.morran-ontn.om

rdnt cont llc.pO Box 11955prott AZ 86304-1955928-925-7038www.trdntont.om

7/16/2019 Gg&g2012cat


echicAl sAffAD ADisOs

We are proud of the staff of engineers and machinists who design and manufacture the products for armed professionals featuredin this catalog. We depend upon them on a daily basis to place your weapon accessory requirements and safety demands atthe top of their list. We also have a very competent group of test and development personnel – you, our customers. We arecontinuously responsive to your suggestions, criticisms, ideas and feedback. You know what you want, what you need and whatts your personal, department or unit’s Mission Essential Need Statement (MENS). You use the equipment day in and day outunder a variety of environmental and high stress conditions that are impossible to duplicate in any laboratory scenario. Theinformation we receive from our customers is priceless. We would like to thank you for caring enough about GG&G and theproducts we manufacture to take the time to discuss your experiences with our products and share your ideas. In addition to ourdesign and production staff, there are a number of highly skilled, armed professionals who have taken a special interest in ourcompany and its products. They have provided us with invaluable technical expertise and advice and given our products thetoughest possible eld tests. Some, by virtue of their work must remain anonymous, but a few are listed below.

cr cara

Dnn cakr

harr hmr

ptr Kokag stok

han an

7/16/2019 Gg&g2012cat


ABle OfcOes

DOMINATOR-1 BARRELED UPPER RECEIVER ..........................................................................................................................6FLIP UP REAR SIGHTS ..........................................................................................................................................................8

FLIP UP FRONT SIGHTS ......................................................................................................................................................12

TACTICAL FOREARMS .........................................................................................................................................................16

OPTICAL MOUNTING SYSTEMS ...........................................................................................................................................20

RED DOT OPTIC ACCESSORIES ............................................................................................................................................39

TACTICAL FOREARM ACCESSORIES ......................................................................................................................................42

COMBAT LIGHT MOUNTS ...................................................................................................................................................44

AR-15/M16 SLING ATTACHMENTS ......................................................................................................................................49

TACTICAL SLINGS...............................................................................................................................................................62

SHOTGUN ACCESSORIES ....................................................................................................................................................71

GG&G MINI-14 ACCESSORIES ............................................................................................................................................86

EDGED WEAPONS..............................................................................................................................................................87

SCOPE RINGS ....................................................................................................................................................................89

TACTICAL BIPODS ..............................................................................................................................................................92

GG&G FUN STUFF .............................................................................................................................................................99

NIGHT VISION SYSTEM ....................................................................................................................................................102

GG&G TOOLS AND FIREARM MAINTENANCE .....................................................................................................................104

GG&G APPAREL ..............................................................................................................................................................107

SHIPPING RATES .............................................................................................................................................................108

LIFETIME WARRANTY .......................................................................................................................................................109

7/16/2019 Gg&g2012cat


t

6

DOMiAO-1BAeleD uppe eceie

Avaab Wt yor co O

etr fr foat ata forarmOr standard ata forarm16” Barr Avaab n 1-9

or 1-7 wt at

The GG&G Dominator-1 isa 5.56mm Barreled Upper Receiver with the Most Sought-Ater Urban WarareComponents.

D O M I N A T

O R - 1 B A R

R E L E D U

P P E R

R E C E I V E R

t

Standard ForearmConguration

Free Floating ForearmConguration

Top Rails Line Up for EasyAccessory Mounting

7/16/2019 Gg&g2012cat


DOMINATOR-1 SPECIFICATIONS:• Mil-Spec Forged 7075 Aluminum A3 Upper Receiver With Correctly Cut M4 Feed Ramps.

• Military Type M4 Barrels. Complete With Forward Assist And Ejection Port Cover.

• Upper Receiver is T-marked

• A2 Back Up Iron Sight With Locking Detent.

• 16 Inch Set Up Includes Chrome Moly M203 Contoured Barrel With Your Choice Of A 1-9 Or 1-7 Twist Rate And Flash Hider.Barrel And Chamber Are Hard-Chrome Lined.

• Mil-Spec Gas Tube And Delta Ring Assembly.• Flip Up Front Sight With Locking Detent Mechanism, Bayonet Lug And Ambi Sling Swivel.

• Your Choice Of The Standard Tactical Forearm Or The Free Float Model. Both Are Fully Equipped With Rails And Foregrip Panels.

• Recoil Cross Slots Of Upper Receiver And Tactical Forearms Are Sequentially Numbered. (T-Marked)

• Aluminum Components Have Been Type III Hard-Coat Anodized Matte Black Per Mil-Spec.

• Steel Components Have Been Manganese Phosphated Matte Black Per Mil-Spec.

• Fully Assembled And Headspaced, Ready For Your Bolt Group And Lower Receiver.

Domnator-1 Wt standard ata forarm And 16” Barr Wt 1-7 wt at:ggg-1321 ...$780.00

Domnator-1 Wt standard ata forarm And 16” Barr Wt 1-9 wt at:ggg-1300 ...$780.00

Domnator-1 Wt fr foatn ata forarm And 16” Barr Wt 1-7 wt at:ggg-1311 ...$780.00

Domnator-1 Wt fr foatn ata forarm And 16” Barr Wt 1-9 wt at:ggg-1322 ...$780.00

Dominator-1 Package includes:GG&G A2 Back Up Iron Sight, Flip Up Front Sight Your Choice o Tactical Forearms and Barrel Twists

7/16/2019 Gg&g2012cat


The GG&G A2 AR-15 rear sight is our number one selling Back Up Iron Sight (BUIS). It provides the operator with an easyto-install and easy-to-operate ip up rear sight, and includes the all-important locking detent. Besides providing a low prole“ready to go” BUIS when you need it, features include a tactile ergonomic windage knob, a counter sunk crossbolt to eliminatethe possibility of snags, and a streamlined body. The A2 Back Up Iron Sight is always at the tactical ready once placed in the upposition. The sight cannot be folded down without depressing the spring assisted detent release button located on the left side othe sight base. This totally eliminates the possibility of accidentally lowering the sight.

The A2 BUIS can be used as a co-witness iron sight with most red dot sighting systems, as a stand-alone sight or in conjunction witone of our interface rails. Weighing in at just over two ounces, it features the standard military A2-style double peep aperture whichallows for end user known point of impact. The sight has full windage adjustment with the tactile windage knob. One click of the windage knob provides approximately 0.48 MOA change when mounted on the M16A2E4 rie and about 0.65 MOA on the M4

carbine. Initial zero is set by adjusting the weapons front sight post. It is low prole so that when in the down position, it will cleamost optics. The mount body and sight stem are manufactured from billet 6061 T6 aluminum alloy and Type III hard coat anodizedin a non-reective black mil-spec nish to provide combat durability. All steel components are black manganese phosphated pemil-spec. These are the same back up iron sights used by elite armed forces and law enforcement teams world wide.

As an option you can request the XS same plane aperture, or Trijicon Tritium aperture to be factory installed when you order theGG&G A2 BUIS.

A2 Buis: ggg-1005...$124.95A2 Buis wt rjon rtm Artr: ggg-1005.. .$174.95A2 Buis wt s sam pan Artr: ggg-1005s...$169.95

A2 Buis BAcK up iO sigh

Counter SunkCross Bolt

t

Tactile ErgonomicWindage Knob

t

Optional Trijicon

Tritium Aperture

Spring AssistedLocking DetentButton

t

f L

I P

U P R

E A R

s I

g h T s

8

7/16/2019 Gg&g2012cat


The GG&G A2 Spring Actuated BUIS (Back Up Iron Sight) is the latest evolution in our BUIS product line. Many operators requested that we manufacturan A2 BUIS that would deploy with just a push of a button. We think we have successfully fullled that request. The unique and proprietary design of themechanism allows the actuator spring and mechanical components to be captivated and therefore not be open to the environmental elements. The sighnot only springs into an on target position with just the push of the actuator button, but it also locks solidly into the upright on target position. Anotherpush of the button and the lock is released allowing you to set the sight into the locked down position. The sight cannot be folded down without depressingthe actuator button located on the left side of the sight base. This totally eliminates the possibility of accidentally lowering the sight.

The GG&G A2 Spring Actuated BUIS provides the operator with an easy-to-install push button operated ip up rear sight. The Spring Actuated A2BUIS can be used as a stand-alone sight or in conjunction with one of our interface rails. It can also be used as a co-witness iron sight with most reddot sighting systems. Weighing in at just over 2.4 ounces, this sight features the standard military A2-style double peep aperture which allows for enduser known point of impact. The sight has full windage adjustment with tactile windage knob and windage screw. No need to retrain when using this

sight. One click of the windage knob provides approximately 0.48 MOA change when mounted on the M16A2E4 rie and about 0.65 MOA on theM4 carbine. Initial elevation zero is set by adjusting the weapons front sight post. It is low prole so that when in the down position, it will clear mostoptics to provide combat exibility. The mount body and sight stem are manufactured from solid billet 6061 T6 aluminum alloy and Type III hard coatanodized in a non-reective black mil-spec nish. All steel components are black manganese phosphated per mil-spec.

As an option you can request installation of either the XS same plane aperture, or Trijicon Tritium aperture. Except for these optional apertures, alsight components are standard M16A2 sight components.

srn Atatd A2 Buis: ggg-1005-sA...$159.95srn Atatd A2 Buis Wt rjon rtm Artr: ggg-1005-sA.. .$209.95srn Atatd A2 Buis Wt s sam pat Artr: ggg-1005-sAs...$204.95

ActuatorButton

t

Fast SightDeployment

Low Prole

Uses Standard A2Sight Components

A2 spig AcuAeD Buis(BAcK up iO sigh)

tOptional Trijicon Tritium Aperture

10

7/16/2019 Gg&g2012cat


The GG&G MAD (Multiple Aperture Device) BUIS (Back Up Iron Sight) was originally developed to fulll a request from Naval SurfaceWarfare for a battle ready low prole back up iron sight that provided both a large and small aperture on the same plane and provideco-witness capability with the majority of red dot optics. The MAD has four apertures, two of each size (so that rotating the aperturedisc in either direction will bring the next size into view). All apertures are on the same plane and are thus zeroed to the same pointof impact. The aperture disc is knurled for easier manipulation in combat environments. The small aperture diameter is 0.073-inchand the large aperture is 0.199-inch in diameter. The tactile windage knob and windage screw are used. One click of the windageknob provides approximately 0.48 MOA change when mounted on the M16A2E4 rie and about 0.65 MOA on the M4 carbine. TheMAD mount body is CNC manufactured from billet 6061 T6 aluminum alloy and Type III hard coat anodized in a non-reective black

mil-spec nish to provide combat durability. The stem and aperture disc are made from solid billet 4140 steel and have hardened wear points for long service life. All steel components are black manganese phosphated per mil-spec. The MAD overhangs the rear othe receiver by 0.200-inch. This provides a lip so that the sight can be easily deployed even with a gloved hand. The sight stem lockin the up position with a positive mechanical detent system. Once placed in the up position, the sight cannot be folded down withoutdepressing the spring assisted detent release button located on the left side of the sight base. This totally eliminates the possibility oaccidentally lowering the sight. The MAD is the lowest prole BUIS with a locking detent and weighs in just over two ounces. It is nowavailable with an option for Trijicon Tritium night sight inserts. The MAD is used by elite armed forces and law enforcement teams world-wide. Don’t ort t omatb wt t Armat A-10 and DpMs l r r.

MAD Buis (BAcK up iO sigh)Wt lokn Mana Dtnt

MAD Buis: ggg-1006...$140.00MAD Buis wt rjon rtm: ggg-1006.. .$190.00

10

Spring AssistedLocking DetenButton

t

f L

I P

U P R

E A R

s I

g h T s

Optional TritiumNight Sight

t

7/16/2019 Gg&g2012cat


The MAD BUIS with Ranging Aperture was originally manufactured by GG&G under a contract with Picatinny Arsenal, and although it iammunition and weapon specic, those shooters using 55 or 62 grain ammunition with a 16” barrel will nd it very accurate.

The MAD BUIS with Ranging Aperture has all of the same great features as the standard MAD BUIS such as its low prole, solid 4140 steeand 6061 T6 aluminum construction, solid locking detent with button release, and mil-spec nish. It has one important exception. The uniquerotating multiple aperture disc has ve apertures preset to specied distances. Specically, 0=25 and 200yds 3=300yds 4=400yds 5=500yds6=600yds. A small window facing the shooter, as can be seen in the above photograph, provides a numerical cue as to the range. All apertureare the same diameter—-.070” diameter.

The apertures have been preset using the ballistic calculations for 55 grain through 62 grain ammunition used in the AR-15/M16 16” carbinelength weapon.

MAD Buis wt ann Artr: ggg-1006A...$140.00

MAD Buis (BAcK up iO sigh)Wt ann Artr

Extremely Low Profle

Clears Most Optics

LockingDetentButton

t

tRange IndicatingWindow

7/16/2019 Gg&g2012cat


We offer two models to ll the two different set ups shooters are presently using; One for the shooter using railed gas blocksthat are lower than the Mil-Spec attop upper receiver, and the other manufactured to be installed on a dovetailed gas blockor tactical forearm that is at the same height as a Mil-Spec attop upper receiver. This set up provides the same command sighheight for the front sight as that of the backup iron sight when it is mounted to the attop receiver. Both models “True Centerco-witness with most red dot optics.

With just one push of the actuator button, the Spring Actuated Flip Up Front Sight For Dovetails can be quickly deployed for fastarget acquisition. The sight locks in the upright-deployed position and in the down position to aid in preventing accidentallylowering or raising the sight in tactical situations. The actuator button is located on the left or non ejection port side of the weapon This aids ease of operation with the left hand, leaving the right hand in the proper position for re control. The Spring ActuatedFlip Up Front Sight is compatible with all four models of Rear Flip Up Sights that GG&G manufactures.

To maintain exibility, we integrate standard Mil-Spec sight components in these combat ready sights. Both models have had athe edges dehorned for web gear and end user safety. Both sights are constructed from Aircraft grade 6061-T6 aluminum, sandblasted and Type III hard coat anodized per Mil-Spec to provide a corrosion and abrasive resistant non reective matte blacknish. An optional Trijicon Tritium Front Sight post can be purchased and installed by GG&G to provide the edge in low light ornight shooting environments.

srn Atatd f u front st for Dovta ga Bok ggg-1281...$99.95srn Atatd f u front st for ata forarm: ggg-1393...$99.95Otona rtm front st pot: ggg-1098...$50.00

spig AcuAeD flip up fO sighwo Mod Avaab

One or Dovetailed Gas Blocks and

One to Mount on Tactical Forearms

f L I P

U P

f R

O N T

s I

g h T s

12

Low ProleActuatorButton

t

Optional Trijicon Tritium Night Sight

t

7/16/2019 Gg&g2012cat


Many shooters feel the standard AR-15/AR-10 removable front sights are cumbersome to use, too easily misplaced, and distracting when opticasights are deployed. The GG&G Flip Up Front Sight For AR-15 and AR-10 Dovetailed Gas Blocks are easy to install, simple to deploy, weigh in at onl3.2 ounces and include a mechanical locking detent system. They can easily be installed by the operator onto the AR-15 or AR-10 dovetailed gablock with only an allen wrench, which is included. Once installed, they can remain in place, as they can be raised or lowered instantly. Protective earare provided for the sight with gripping serrations to more easily raise and lower the sight assembly in combat environments. With the mechanicalocking detent, the front sight cannot be accidentally lowered. To lower the sight the operator only has to push a button. When in the upright positioit provides the same command height as the original AR-15/M16 front sight and can be co-witnessed with red dot optics. To insure exibility, we us

standard military sight components in this combat ready sight. The GG&G Flip Up Front Sight For Dovetailed Gas Blocks is manufactured from soli4140 billet chrome moly steel and is bead blasted and manganese phosphated to provide a non-reective, corrosion resistant matte black nishmeeting mil-spec requirements. All edges have been dehorned to protect the shooter. As an option, a Trijicon Tritium Front Sight Post can be ordere with the sight. The Flip Up Front Sight for AR-15 Dovetailed Gas Blocks is compatible with DPMS LR series ries. The AR-10 model is specic to tha weapon system, and is designed to co-witness with a GG&G MAD BUIS or other back up iron sight.

f u front st for Dovta ga Bok: ggg-1023...$135.00f u front st for A-10 Dovtad ga Bok: ggg-1323...$135.00Otona rtm front st pot: ggg-1098...$50.00

Spring AssistedLocking Detent Button

t


t

Protective EarsWith Gripping Serrations

t

flip up fO sigh fO A-15AD A-10 DOeAileD gAs BlOcKs

lok in up poton


t

7/16/2019 Gg&g2012cat


The GG&G Bolt On Flip Up Front Sight Gas Block is a top of the line, easy to install, ip up front sight gas block system. The FliUp Front Sight Gas Block is secured in place by a Tri-Point clamping mechanism guaranteeing consistent accuracy and trouble freeoperation. The sculpted nger groove design is not only ergonomic but allows for quick deployment. Manufactured from solid4140 chrome moly billet steel with hardened wear points and nished with a mil-spec manganese phosphate process, this unit iready for rugged use. As a method of standardization the M16A2 square front post is used, which is fully adjustable for elevationzero. It will also accommodate A1 and Trijicon front sight posts. Protective ears are provided for the sight with additional gripping

serrations to aid in raising and lowering the sight assembly. The GG&G Bolt On Flip Up Front Sight Gas Block is equipped with aspringloaded, positive wedge lock detent system that keeps the front sight in the up position preventing accidental lowering ofthe unit while maintaining on target repeatability. The locking system is designed to be operated with one hand so that the recontrol hand does not need to be removed from the weapons re control system to deploy or lower the sight. Further, the sighcomes equipped with a standard 1 1⁄4-inch, ambidextrous sling swivel that bolts to the gas block at a low position. Additionallythere is a provision for the easy attachment of an optional MIL-STD-1913, ambidextrous 1 1⁄2-inch long dovetail for mountingashlights, LAMs and other small accessories onto the gas block base.

Bot On f u front st ga Bok: ggg-1297.. .$173.50Otona rtm front st pot: ggg-1098...$50.00Otona Aor a: ggg-1026...$31.00

BOl O flip up fO sighga Bok stm


t

t

AmbidextrousMil-Spec Sling Attachment

f L I P

U P

f R

O N T

s I

g h T s


t

Spring AssistedLocking Detent Buttont

t

Solid Tri-Point Clamping

OptionalAccessory Railt

7/16/2019 Gg&g2012cat


Although we manufacture a very high quality and rugged bolt on ip up front sight, many of our customers want, and some agencies demand, ataper pin installation. To accommodate those customers we continue to manufacture and install the GG&G Flip Up Front Sight gas Block For Taper PiInstallations. The sight is manufactured from 4140 chrome moly billet steel and nished by a mil-spec manganese phosphate process. The M16A2square front sight post is used, which is adjustable for elevation zero. Protective ears are provided for the sight with gripping serrations to more easilyraise and lower the sight assembly. The redesigned mechanical lock is a spring-loaded, positive wedge lock detent system that keeps the front sight inthe up position preventing accidental lowering of the unit while insuring and maintaining on target repeatability. The locking system is designed to be

operated with one hand so that the re control hand does not need to be removed from the weapons re control system to deploy or lower the sightFurther, the sight comes with a standard mil-spec 1 1⁄4-inch, ambidextrous sling swivel that bolts to the body of the sight. There is a provision forthe easy attachment of an optional MIL-STD-1913, ambidextrous 1 1⁄2-inch long dovetail for mounting ashlights, LAMs and other small accessorieonto the gas block base. As an option, a Trijicon Tritium Front Sight Post can be ordered with this sight. The installation process requires removal andreplacement of the taper pins that hold the sight in place. Your barrel or barreled upper receiver must be sent to us for installation of this product.

f u front st ar pn ron: ggg-1024...$191.95Otona Mil-sD-1913 Aor a: ggg-1026...$31.00Otona rtm front st pot: ggg-1098...$50.00

flip up fO sigh gAs BlOcKApe pi esiO

lok in up poton

t

Taper PinInstallation

t t

OptionalAmbi Accessory Rail

t

Spring Assisted

Locking DetentButton

tMil-spec 1 1/4”Ambi Sling Swivel


7/16/2019 Gg&g2012cat


T A

C T I C A L f O R E A R M s

In keeping with one of our primary goals, “maximize product exibility”, the GG&G Free Floating Tactical Forearm offers themost user accommodating tactical forearm in the world today. The Free Floating Tactical Forearm is easily installed on AR-15/M1carbine length barrels and unlike other models, this free oating forearm can be mounted on A2 carry handle congurationsAs with other free oat versions in the marketplace, the barrel has to be removed from the receiver for installation. The twohalves of the GG&G forearm frame are installed onto the barrel nut with a rigid attachment method. The innovative attachmenprovides for a full oating barrel. Unlike other models the installation does not require removal of the front sight or the muzzlbrake on post ban models. Once installed the Free Floating Tactical Forearm is ready to be outtted with the rails and forearm

panels installed in the locations that best suit your accessories, mission requirements and shooting style. The unique design of thiforearm and rail system allow the end user to place rails and forearm panels at eight different positions. Unlike other forearmin the market, the innovative GG&G solid polymer removable forearm panels are the same thickness as the removable rails, s when in place, the prole is no larger than the forearm.

THE KIT COMES COMPLETE WITH ALL MOUNTING HARDWARE AND THE FOLLOWING COMPONENTS:

• (1) Free oating forearm assembly, (1) full and (2) half-top and bottom rails (two halves placed together make a full rail)

• (2) half-top and bottom forearm panels (two halves placed together make a full forearm panel)

• (2) half-side rails, (1) half-offset side rail (ambidextrous design), and (2) half-side forearm panels. The kit also includes atorx wrench. If by chance you need an additional rail or forearm panel, they are available as an option.

fee flOAig AcicAl fOeAM

t

IMPORTANT: Rail is atSame Height as Top

of Receiver Two 1/2 Length MIL-STD-1913

Side Rails Included in Kitt

t

Two 1/2 Length ForearmSide Panels Included in Kit

t

Two 1/2 Length MIL-STD-1913 Top/Bottom Rails Included in Kit

Two 1/2 Length ForearmSide Panels Included in Kit

Two 1/2 Length Top/BottomForearm Panels Included in Kit

t

One Full Length MIL-STD-1913 Top/Bottom Rail Included in Kit

t

t

One 1/2 Length OffsetMIL-STD-1913 Rail

Included in Kit

t

16

7/16/2019 Gg&g2012cat


The major components of the Modular Free Floating Tactical Forearm are manufactured from billet 6061 T6 aluminum alloy and are Type III hard coaanodized in a durable tactical non-reective matte black nish per mil-spec. The forearm panels are manufactured from solid acetal cold polymer This provides a very maneuverable and lightweight accessory: All attachment points are stainless steel helicoils and torx screws.

The photos represent only a few of the many mounting options available with the Free Floating Tactical Forearm.

fr foatn forarm: ggg-1201...$215.00

fee flOAig AcicAl fOeAM

t

t

PAQ 4 Mounted at 12 o’clock Positionon Top Rail Attached at the Forward Position.

SUREFIRE 951 Flashlight Mounted at 4 o’clockPosition on Offset Rail. This Position Allows the

Light to be Activated by Using the Thumb of

the Off Hand While Maintaining a Positive Gripon the Vertical Foregrip.

t

SLING THING FOR DOVETAILSMounted at 9 o’clock Position on 1/2 Side Rail.

t

GG&G Vertical Foregrip t

7/16/2019 Gg&g2012cat


sADAD AcicAl fOeAMDrt handard amnt-sm intaaton

“Maximize product exibility” is one of our mostimportant company goals. In keeping with thatgoal, the GG&G Tactical Forearm is the most user

accommodating non-free oating tactical forearmin the world today. The Tactical Forearm is easilyinstalled on AR-15/M16 carbine length barrelsincluding A2 carry handle congurations. All that isrequired to install this rugged lightweight forearmis the removal of the existing polymer forearmpieces. The two halves of the Tactical Forearm frameare installed beneath the delta ring onto the barrelnut with a rigid attachment method. The front ofthe forearm is installed under the handguard cap. The innovative attachment method provides a

rock solid attachment and the installation does notrequire removal of the front sight or the muzzlebrake. Once installed the GG&G Tactical Forearmis ready to be outtted with the rails and forearmpanels installed in the locations that best suit youraccessories, mission requirements and shooting style. The 12 o’clock rail bridges the delta ring to the frontof the receiver. The unique design of this forearmand rail system allow the end user to place rails andforearm panels at eight different positions.

One Full LengMIL-STD-191

Top/Bottom RIncluded in K

t

t Two 1/2 Length

MIL-STD-1913 Top/Bottom Rails

Included in Kit

t

Two 1/2 Length Top/BottomForearm Panels Included in Kit

t

Two 1/2 LengthMIL-STD-1913

Side Rails Included in Kit

tt

T A

C T I C A L f O R E A R M s

12 o’ok ra t am t

a t rvr and brd tdta rn

7/16/2019 Gg&g2012cat


THE KIT COMES COMPLETE WITH ALL MOUNTING HARDWARE AND THE FOLLOWING COMPONENTS:

• (1) basic forearm assembly

• (1) full and (2) half-top and bottom rails (two halves placed together make a full rail)

• (2) half-top and bottom forearm panels (two halves placed together make a full forearm panel)• (2) half-side rails, (1) half-offset side rail (ambidextrous design), and (2) half-side forearm panels.

• The kit also includes a torx wrench. If you need an additional rail or forearm panel, they are available as an option.

The major components of the GG&G Tactical Forearm are manufactured from 6061 T6 billet aluminum alloy and are Type III hard-coat anodizematte black per mil-spec. The forearm panels are manufactured from solid acetal cold polymer. All attachment points are tough stainless steehelicoils and torx screws.

standard ata forarm: ggg-1285...$215.00

sADAD AcicAl fOeAMDrt handard amnt-sm intaaton

One 1/2 Length OffsetMIL-STD-1913 Rail

Included in Kit

t

tt

Two 1/2 Length Forearm

Side Panels Included in Kit

t

Easily Installs on the Barrel NutBeneath the Delta Ring and the

Front Handguard Cap

12 o’ok ra t am a t rvr and brd t

dta rn

7/16/2019 Gg&g2012cat


AiMpOi sADAD ig

In 1997 the U.S. Army adopted the Aimpoint Comp M electronic reex sight for the M16A2E4 rie and M4 carbine series. It wasubsequently succeeded by the Aimpoint CompMXD, CompM2, M3, and CompM4 which features a better nish and longer batter

life. Besides being a favorite of the military, it has become popular in civilian and law enforcement circles.

The GG&G Standard Aimpoint Ring was designed to maximize the Aimpoint’s tactical features. Manufactured from solid 606 T6 billet aluminum alloy and Type III hard coat anodized matte black per-mil spec, this ring is attached to the base by using squeeze rail design incorporating a single elliptical thumbnut. There is also a square locking cross bar for recoil control. The rinbody has a built-in insulated spare battery compartment with a spare battery cap. This is an important feature and it’s located othe side of the ring for easy access. Our ring is extra wide so that only one is required. Because it is a low prole design in ordeto clear the AR-15/M16 front sight, the Standard GG&G Aimpoint Ring must be mounted on a Scout length FIRE system rail inorder to be at the proper height to co-witness with the rear BUIS on an AR-15/M16 Flat Top upper receiver.

Amont com M sr standard n: ggg-1013...$164.95

Insulated Waterproof

Spare Battery Compartment

t

20

O P T

I C A L M

O U N T I N g

s Y s

T E M s

7/16/2019 Gg&g2012cat


If you attach an Aimpoint CompML, M2 or M3 series red dot sight directly to an AR-15/M16 “attop” upper receiver’s integral rail using aconventional ring mount it will be far too low to acquire the red dot without front sight interference, no matter what type of cheek weld you adopt

Our Aimpoint Cantilever Ring permits mounting the Aimpoint Comp M series scopes directly to the receiver’s integral rail with the red dot positionedabove the front sight post. Additionally it’s still low enough so that our MAD or A2- Style Flip Up Rear Sights can be deployed to co-witness directlythrough the Aimpoint’s optics should its battery fail. The GG&G Cantilever Ring is also designed to place the Aimpoint CompML, M2 or M3 series scopefar enough forward so that a night vision monocular can be mounted to the rear in co-alignment and in conjunction with the Aimpoint’s night visiocompatibility. The re-designed GG&G Aimpoint Cantilever Ring is lighter in weight, and incorporates a captivated thumbnut and spring activatedsidebar, aiding the mount installation, especially in low light conditions. The ring body still has a built-in insulated spare battery compartment with aspare battery cap located on the side for easy access. The rugged GG&G Cantilever Ring is manufactured from solid billet 6061 T6 aluminum alloyand is Type III hard-coat anodized matte black per mil-spec.

Amont cantvr n: ggg-1014...$175.00

AiMpOi cAilee ig

• The Only Aimpoint Ring with SpringLoaded Side Bar

• CaptivatedThumbnut

Insulated WaterproofSpare Battery Compartment

t

7/16/2019 Gg&g2012cat


Many of our customers have asked us to develop a quick detach system for our combat tested Aimpoint Cantilever Ring. With thedevelopment of our patented Accucam Quick Detach Locking Lever System we are able to ll those requirements. The AccucamQuick Detach Aimpoint Cantilever Ring has the same robust features as our original Aimpoint Cantilever Ring—the body ismanufactured from solid billet 6061 T6 aluminum, six cap screws rmly hold the Aimpoint in place, and the insulated waterproospare battery compartment keeps a spare battery handy. It has a Type III hard coat anodized matte black mil-spec nish. TheAccucam QD Locking Lever System provides you with a solid method to quickly install or remove your Aimpoint from the weaponsystem. The Aimpoint can quickly be installed on a dovetail rail in seconds by rotating the Accucam Cam Lever to the locked positionIt can then be quickly removed by rotating the Accucam Cam Lever to the unlocked position. It is fully adjustable to t Weaverand MIL-STD-1913 dovetails. The unique design allows you to adjust the tension to accommodate out of spec or worn dovetailsDuring eld testing, the Accucam Locking Lever System has shown to be repeatable to 1/2 MOA. The unique nger loop design ieasily operated, even with a gloved hand and the rounded design is ergonomic and virtually snag proof. The Accucam mechanism

is manufactured from solid billet 4140 steel and manganese phosphated matte black per mil-spec.imortant Amont comM2, Ml2 and M3 Montn condraton: Do to the Accucam mounting mechanism beinglocated on the non-ejection port side of most weapons, the battery/brightness control mechanism of the Aimpoint will be located atthe 10:00 o’clock position as shown in the above image (non-ejection port side), instead of the 2:00 o’clock position (ejection portside). This allows a right handed shooter to easily operate the Accucam QD mechanism and the brightness control knob with the ofhand instead of the re control hand. The windage and elevation adjustments are also rotated.

imortant Amont comM3 bbr covr condraton: If you intend to use the rubber cover included with youAimpoint CompM3, it will need to be modied to t with the Accucam QD Aimpoint Cantilever Mount.

Aam cantvr Amont n: ggg-1191...$212.00

AccucAM QuicK DeAchAiMpOi cAilee ig

Easy OperatingFinger Loop Design

t

Fully Adjusts to Fit Wornand Out-of-Spec Dovetail Rails

tIncludes InsulatedWaterproo SpareBattery Compartment

22

O P T

I C A L M

O U N T I N g

s Y s

T E M s

7/16/2019 Gg&g2012cat


The Aimpoint CompM4/M4S is the latest version of the U.S. Army’s M68 CCO (Close Combat Optic) and is capable of withstanding the roughescombat environments. We thought it needed a quick detach mounting base that matched its exceptional durability, so we developed the GG&GAccucam Quick Detach Aimpoint CompM4/M4S Mounting Base. This mount provides a degree of tactical exibility highly valued in urban combat The Accucam Quick Detach Aimpoint CompM4/M4S Mounting Base allows the end user to quickly switch between optics and still maintain “on targetrepeatability. The Aimpoint CompM4/M4S is a rugged optic, however should it fail, the end user can quickly remove the Accucam and deploy the

weapons back up iron sight (BUIS). By using the Accucam Quick Detach Aimpoint CompM4/M4S Mounting Base, the optic can quickly be installed oa dovetail rail by rotating the Accucam Cam Lever to the locked position. It can then be quickly removed by rotating the Accucam Cam Lever to theunlocked position. The unique cam design is fully adjustable to t both Weaver and MIL-STD-1913 dovetails, and allows you to adjust the tension toaccommodate out-of-spec or worn dovetails. In tests, the Accucam Locking Lever System has shown to be repeatable to 1/2 MOA. The unique ngeloop design is easily operated, even with a gloved hand and the rounded design is ergonomic and virtually snag proof. The GG&G Accucam QuickDetach Aimpoint CompM4/M4S Mounting Base is manufactured from solid billet 6061 T6 aluminum alloy and Type III hard-coat anodized matteblack to meet mil-spec. The Accucam mechanism is manufactured from solid billet 4140 steel and manganese phosphated matte black to mil-spec.

Aam Qk Dta Amont comM4/M4s Montn Ba: ggg-1331...$139.95

AccucAM QuicK DetAchAiMpOint cOMpM4/M4s MOunting BAse

t

t


Fully Adjusts for Worn andOut-Of-Spec Dovetail Rails Will “True-Center”

Co-Witness with Back UpIron Sights When Mounted with Factory Spacer

7/16/2019 Gg&g2012cat


AiMpOi cOMpM4/M4s AccucAMQuicK DeAch cAilee

MOuig BAse

Correct Height or “True-Center” Co-Witness withBack Up Iron Sights

Fast, Easy OperatingFinger Loop Design

The Aimpoint CompM4/M4S Accucam QD Cantilever Mounting Base provides you with two inches of additional eye relief, whilealso providing space behind the CompM4/M4S for an Aimpoint 3X Magnier or PVS-14 Monocular. Tactical exibility is highlyvalued in urban combat, and the Aimpoint CompM4/M4S Accucam QD Cantilever Mounting Base lls that need. This base allowthe end user to quickly switch between optics and still maintain “on target” repeatability.

The Aimpoint CompM4/M4S is a rugged optic, however should it fail, the end user can choose between quickly deploying the weapons back up iron sight, and sighting through the CompM4/M4S, or quickly remove the scope and deploy the back up ironsight. By using the Aimpoint CompM4/M4S patented Accucam Quick Detach Cantilever Mounting Base, the optic can quickly beinstalled on a dovetail rail by rotating the Accucam Cam Lever to the locked position. It can then be quickly removed by rotatingthe Accucam Cam Lever to the unlocked position. The unique cam design is fully adjustable to t both Weaver and MIL-STD-1913dovetails, and allows you to adjust the tension to accommodate out-of-spec or worn dovetails. In tests, the Accucam Locking Lever System has shown to be repeatable to 1/2 MOA. The unique nger loop design is easilyoperated, even with a gloved hand and the rounded design is ergonomic and virtually snag proof. The New GG&G AimpoinCompM4/M4S Accucam Quick Detach Cantilever Mounting Base is manufactured from solid billet 6061 T6 aluminum alloy and Type III hard-coat anodized matte black to meet mil-spec. The Accucam mechanism is manufactured from solid billet 4140 steeand manganese phosphated matte black to mil-spec.

Amont comM4/M4s Aam QD Montn Ba ggg-1247...$165.00

O P T

I C A L M

O U N T I N g

s Y s

T E M s

Accucam QD SystemFully Adjusts or Worn andOut-O-SpecDovetail Rails

Cantilevers Forwardor Proper Eye Relie

7/16/2019 Gg&g2012cat


AIMPOINT T-1/H-1 BOLT ON MOUNT WITH INTEGRAL LENS COVERS:

• Ergonomic design

• Aimpoint T-1 Mount and H-1 Mount provide a solid bolt on squeeze rail mounting system with a single recessed side bar and recessedsocket head cap screw.

• The Aimpoint Mount includes a custom prepared lens cover for the objective lens and an integral lens cover for the ocular end of the scope.

• The Aimpoint T-1/H-1 scopes easily install onto the T-1 Mount and the H-1 Mount with four 3mm screws. The installation wrench is included

• Designed to mount directly to the AR-15/M16 upper receiver’s dovetail. This location places the red dot just above the front sight post.

• The Aimpoint T-1/H-1 Mount is low enough to allow true center co-witnessing with sights like the GG&G A2 BUIS and MAD BUIS.

• The T-1/H-1 Mount With Lens Covers is manufactured from solid billet 6061 T-6 aluminum.

• All aluminum parts are Type III hard coat anodized matte black per mil-spec.

Amont -1 And h-1 Bot On Mont Wt intra ln covr: ggg-1408...$145.00

Solid Mounting withProtection or thoseExpensive Lenses

AiMpOi -1 AD h-1 BOl O MOuWih iegAl les cOes

7/16/2019 Gg&g2012cat


O P T

I C A L M

O U N T I N g

s Y s

T E M s

2626

We think the Aimpoint Micro T-1/H-1 is a great tactical scope. However, it has a downside, the scope design does not accommodate ip up lens covers. Yes it comes with the bikini lens covers, but most individuals will loose those in the rst monthand they are not the easist lens covers to remove, keep in place or reinstall.

GG&G has come up with a very unique and innovative solution. An Accucam Quick Detatch T-1/H-1 Mount that includes abuilt in provision that provides for the installation of a ip up lens cover for the ocular end. In addition to the ocular lenscover being included, the kit also includes a specially prepared ip up lens cover that ts the objective lens. The Aimpoin T-1/H-1 easily and solidly installs onto the lightweight GG&G Accucam QD mount with four 3mm screws. The installation wrench is included in the kit. The ocular end of the T-1 and H-1 scopes t perfectly into the small integral lens cover angeand while providing the means to mount a ip up lens cover, it does not interfere with the eld of view. The T-1/H-1 mounis manufactured from solid billet 6061 T6 aluminum and is Type III hard coat anodized matte black per mil-spec. The NewGG&G Aimpoint T-1/H-1 QD Mount is manufactured to mount directly to the AR-15/M16 integral rail. This will position thered dot just above the front sight post, for a true center co-witness with the GG&G MAD, A2, or Spring Actuated A2 BUIS.

The patented Accucam Quick Detach Locking Lever System provides you with a sol id method to quickly install or remove theAimpoint T-1/H-1 from the weapon. The scope can quickly be installed on a dovetail rail in seconds by rotating the AccucamLever to the locked position. It can then be quickly removed by rotating the Accucam Cam Lever to the unlocked positionUnlike other QD lever systems, it is fully adjustable to t Weaver and MIL-STD-1913 dovetails. The unique Accucam desigallows you to adjust the tension to accommodate out of spec or worn dovetails. The ergonomic nger loop of the lever is easilyoperated, even with a gloved hand and the round design is virtually snag proof. The Accucam mechanism is manufacturedfrom solid billet 4140 steel and manganese phosphated matte black per mil-spec.

Aam -1/h-1 Mont Wt intra f u ln covr: ggg-1237...$194.95

AiMpOi -1/h-1 QD MOuWt intra

f u ln covr

The Only QD Mount That Includes Flip UpLens Covers!

t

Both Lens Covers Included with The Quick Detach Mount

t

7/16/2019 Gg&g2012cat


The PVS-14 Quick Detach Multi-Flex Night Vision Mount for the ITT PVS-14 series of night vision monoculars, is designed to go rapidly and easily froma head/helmet mount or hand surveillance mode to a weapon mount. Once the ergonomically designed base is installed on the weapon and the ringis installed to the PVS-14, just the rotation of the grooved locking lever will rigidly lock the PVS-14 into place. Just as quickly, it can be removed andused to meet the tactical situation. Our unique QD ring remains attached to the night vision monocular at all times and interfaces with the weapon’mount in mere seconds. Unlike other products on the market, the removal of mount components is not required to quickly and directly attach thePVS-14 to a head or helmet mount. This exibility and versatility is essential in tactical encounters. The QD base with its smooth operating latchinsystem, permits optical co-alignment with night vision compatible red dot sights, such as the Aimpoint or EOTech that are mounted in front of the

night vision scope. The PVS-14 QD Multi-Flex Mount provides the correct height to co-align with the Aimpoint Comp Series of optics when mounted ineither of the GG&G Aimpoint Cantilever Rings as well as when mounted in the Aimpoint QRP ring with the spacer. It will also co-align with most nighvision compatible EOTech optics when they are mounted directly to the upper receiver. The PVS-14 QD Multi-Flex base is a multi-use unit. Besides thPVS-14 night vision monocular mounting ring, it will also accept the Aimpoint 3X magnier when equipped with the GG&G 3X Adapter Plate.

The PVS-14 QD Multi-Flex Night Vision Mount is fully compatible with MIL-STD-1913 dovetails. All parts are manufactured from ordnance steel anaerospace 6061 T6 aluminum and are nished matte black to mil-spec.

ps-14 Qk Dta Mt-fx t on Mont: ggg-1016...$227.50ps-14 Qk Dta Montn n: ggg-1016...$75.00Qk Dta Mt-fx Ba: ggg-1016B...$152.50

ps-14 QuicK DeAch Muli-fleigh isiO MOu

Large Grooved

Finger Pad t Large Grooved

Finger Pad t

PVS-14 Mounting Ring and QD MountingBase can be Purchased Separately

7/16/2019 Gg&g2012cat


O P T

I C A L M

O U N T I N g

s Y s

T E M s

The Aimpoint 3X Magnier can be used in conjunction with all Aimpoint scopes for long range aiming, but when coupled with thGG&G Quick Detach 3X Adapter and Quick Detach Multi-Flex Mounting Base, it can be removed in just seconds for CQB situationsNot only will this set up work with Aimpoint optics, the GG&G Quick Detach Multi-Flex system also allows the Aimpoint 3XMagnier to be used affectively behind an EOTech scope as shown in the above photograph. Adding to the overall exibility of theGG&G system, the ITT PVS-14 Night Vision Monocular can be installed directly into the QD Multi-Flex Base for night targeting. The GG&G Quick Detach Multi-Flex Mounting Base is designed to accept both the GG&G Aimpoint 3X Adapter and the GG&GMounting Ring for the ITT PVS-14 night vision monocular. The base is fully compatible with MIL-STD-1913 dovetails. As can be

seen in the photos, the Quick Detach Multi-Flex Mounting Base and Aimpoint 3x Magnier set up is best used behind the Aimpoinscopes when they are mounted in a mount such as the GG&G Aimpoint Cantilever Ring or an Aimpoint QRP mounting ring.

The GG&G Quick Detach Multi-Flex Mounting Base is manufactured from 6061 T6 billet aluminum alloy and Type III hardanodized matte black per mil-spec. The Aimpoint 3X Adapter as well as all other steel components are manufactured from 4140ordnance steel and manganese phosphated matte black per mil-spec.

All Components of the GG&G QD Multi-Flex Mounting system can be purchased separately as follows:

QD Mt-fx Montn Ba: ggg-1016-B...$152.50Amont 3 Adatr pat: ggg-1233...$33.50i ps-14 Montn n: ggg-1016-...$75.00

AiMpOi 3 MAgifieQuicK DeAch Muli-fle BAse

AD ADApe

28

Long Range Set Up Aimpoint 3X withGG&G QD Multi–Flex Mounting SystemMounted Behind Aimpoint CompM2

Aimpoint 3X Magnier Shown Mounted with the GG&G 3X Adapter and GG&GQD Multi-Flex Mounting Platform

t

Multi Flex QD Mounting Base and 3XAdapter can be Purchased Separately

EOTech Long Range Set Up Aimpoint 3X with GG&G QD Multi-Flex Mounting System

Mounted Behind EOTech 552

t

t

7/16/2019 Gg&g2012cat


Having a primary optic with the capability to be quickly attached and detached from a weapon system, while still maintaining “on target” repeatabilityprovides a degree of tactical exibility highly valued in urban combat. The rugged EOTech holographic sights are excellent choices for a “red dot”optic. However, until now, adding some type of quick detach mechanism meant mounting the sight on some other mounting platform that raised theEOTech at least another 1/2” above the bore. Besides adversely affecting cheek weld, mounting the EOTech in this manner no longer allowed theshooter to co-witness the EOTech sight with the iron sights of the weapon system. Not recommended for .50 BMG or lightweight machine guns.

GG&G has developed a unique and innovative quick detach system that retrots directly to the body of the EOTech. The patented GG&G Accucam QDLocking Lever System replaces the EOTech socket head screw or thumbnut attachment method. No other modications are required. The Accucam systeminstalls in approximately ten minutes. The only tools required are a 7/64” allen wrench and a torx head wrench, both are included in the kit. This systemts new and existing EOTech sights that have the protective shroud and only adds 3 ounces. It is fully adjustable to t Weaver and MIL-STD-1913 dovetailand features an easy to adjust system. Once installed on the EOTech the sight can be quickly installed on a dovetail rail in seconds by rotating the AccucamCam Lever to the locked position. It can then be quickly removed by rotating the Accucam Cam Lever to the unlocked position. In eld testing, the AccucamLocking Lever System has shown to be repeatable to less than 1/2 MOA. The unique nger loop design is easily operated, even with a gloved hand. Therounded design is ergonomic and virtually snag proof. Manufactured from solid billet 4140 steel and manganese phosphated matte black per mil-specthe GG&G Accucam QD Locking Lever System provides a solid, rugged quick detach system for your EOTech.

pAcKAge DeAl: W Or t Aam and ln covr a a paka.pa ca or t or Wbt: az.om or paka inormaton

Aam for eO: ggg-1190...$84.95

eOech AccucAM QuicK DeAchlOcKig lee syseM

for t 512 And 552 hoora st

s: 1240-99-696-3341

Allows for Fast Co-Witnessing

Fully Adjusts forWorn and Out-of-Spec

Dovetail Rails

tEasy Operating

Finger Loop Design

Does Not AddHeight to theEOTech When

Mounted on a Rail

tGG&G EOTechLens Covers

7/16/2019 Gg&g2012cat


O P T

I C A L M

O U N T I N g

s Y s

T E M s

30

The Accucam QD System For The EOTech XPS Series is a scaled down version of the Accucam QD System (NSN:1240-99-6963341) that we provide the civilian, law enforcement and military for the EOTech 512 and 552.

The patented Accucam QD Mounting System is still the only QD Lever System available today that does not add height to the EOTechoptic. That’s because this unique and innovative quick detach system retrots directly to the body of the XPS Scope. The Accucam QDLocking Lever System For The XPS replaces the EOTech socket head screw or thumbnut attachment method. No other modicationsare required. The Accucam system installs in approximately ten minutes. The only tools required are a 7/64” allen wrench and atorx head wrench which are both included in the kit. Weighing only two ounces, it is fully adjustable to t Weaver and MIL-STD-1913 dovetails, even those that are worn or out of spec. Not recommended for .50 BMG or lightweight machine guns. Once the Accucam is installed on the XPS, the sight can be quickly installed on a dovetail rail in seconds by rotating the AccucamCam Lever to the locked position. It can then be quickly removed by rotating the Accucam Cam Lever to the unlocked position. Intests, the EOTech XPS Accucam Locking Lever System has shown to be repeatable to less than 1/2 MOA. The unique nger loopdesign is easily operated, even with a gloved hand and the rounded design is ergonomic and virtually snag-proof.


Aam Qk Dta stm for ps sr: ggg-1269...$84.95

AccucAM QuicK DeAch syseMfO he eOech ps seies

Set up Your XPSthe Right Way

Accucam QD SystemProvides Easy Operating

Finger Loop Design

t

Lens Covers are Spring Operatedfor Easy operation and are

Ambidextrous for Tactical Flexibility t

When open, Rear Lens Cover Folds

Conveniently on Top of Hood t

Front Lens Cover Serves

as a Sun Shade t

Because the Accucam Quick Detach System is

not a Separate Mount, it Does Not Add Heightto the XPS, Making it Perfect for Your CheckWeld and for Co-witnessing

7/16/2019 Gg&g2012cat


Without a doubt the Trijicon ACOG 4X32 series scopes, are some of the most rugged and dependable scopes available. However we think it is missinga very important component—-Lens Covers. Our New Product Development Team decided it was time to provide our customers with a methodto not only mount the scope, but provide a method to protect the lenses of this expensive optic. This package includes the GG&G Accucam ACOGQuick Detach Mount with integral front lens cover adapter, the rear lens cover adapter, and a set of custom Butler Creek lens covers that provide weatherproof, dust proof and moisture proof protection for the ACOG lenses. Two different versions are available. One to t the TAO1, TA31, TA31and TA31RCO and a version to t TA01NSN. Although the patented design and methodology is so unique, the system is easy to install.

The Accucam ACOG Quick Detach Mount provides you with a solid method to quickly install or remove the scope from the weapon. The scope canquickly be installed on a dovetail rail in seconds by rotating the Accucam Lever to the locked position and can just as quickly be removed by rotatingthe Accucam Cam Lever to the unlocked position. Unlike other QD lever systems, it is fully adjustable to t Weaver and MIL-STD-1913 dovetailseven those that are worn or out-of-spec. The ergonomic nger loop of the lever is easily operated, even with a gloved hand, and the round design ivirtually snag proof. The Accucam mechanism is manufactured from solid billet 4140 steel and manganese phosphated matte black per mil-spec.

Aam AcOg Qk Dta Mont Wt intra ln covr:for A01, A31, A31f, and A31cO ggg-1240...$192.00

Aam Qk Dta Mont Wt intra ln covr:for A01s ggg-1241...$192.00

AccucAM AcOgQuicK DeAch MOu

Wt intra ln covr

Two Versions Available: Mod A: TAO1, TA31,TA31F, TA31RCO And Mod B: TA01NSN

t t

Front and Rear Lens Cover

Adapters are ManufacturedFrom Non-Marring Delrin

7/16/2019 Gg&g2012cat


With the development of our Accucam Quick Detach Locking Lever System, we are now able to manufacture a full line oquick detach mounts that allow the primary optic to be quickly attached and detached from the weapon system. This providesa degree of tactical exibility highly valued in urban combat. The GG&G Accucam Quick Detach ACOG mount allows the enduser to quickly switch between optics and still maintain “on target” repeatability. The Trijicon ACOG is a rugged optic and

has an excellent reputation for durability. However, should the ACOG fail, the end user can quickly remove the ACOG anddeploy the weapons back up iron sight. By using the GG&G Accucam QD ACOG mount, the optic can quickly be installed on adovetail rail in seconds by rotating the Accucam Cam Lever to the locked position. It can then be quickly removed by rotatingthe Accucam Cam Lever to the unlocked position. It is fully adjustable to t Weaver and MIL-STD-1913 dovetails. The uniquedesign allows you to adjust the tension to accommodate out of spec or worn dovetails. During eld testing, the AccucamLocking Lever System has shown to be repeatable to 1/2 MOA. The unique nger loop design is easily operated, even with agloved hand and the rounded design is ergonomic and virtually snag proof. The Accucam Quick Detach ACOG mounting baseis manufactured from solid billet 6061 T6 aluminum alloy and Type III hard coat anodized matte black per mil-spec. TheAccucam mechanism is manufactured from solid billet 4140 steel and manganese phosphated matte black per mil-spec.

Aam AcOg Montn Ba: ggg-1192...$139.95

AccucAM QuicK DeAchAcOg MOuig BAse

t


t Fully Adjusts for Worn andOut-of-Spec Dovetail Rails

• Quick Detach• Repeatable

• Provides Tactical Flexibility

O P T

I C A L M

O U N T I N g

s Y s

T E M s

7/16/2019 Gg&g2012cat


We offer the FLT Scope Mount in two congurations; one is the Accucam QD model for those shooters requiring the ability to quickly remove or instaltheir scope with 1/2 MOA repeatability, and the other is a semi-permanent bolt on installation, using a standard squeeze rail conguration side baand 1/2” hex nuts. Both offer forward scope mounting, perfect for the Special Purpose Rie. For comparative purposes the FLT Scope Mount placethe scope forward 1.5 inches more than the GG&G AC-30 Scope Mount. The FLT Mount is lightweight weighing in at only 5.5 ounces, and is 5 inchelong. It is low prole allowing excellent cheek weld when mounted to the AR-15/M16 attop upper receiver. The height from the centerline of the30mm integral rings to the top of the dovetail mounting platform is 1.460 inches. The center to center dimension of the rings is 3.750 inches. Bothmodels are manufactured from 6061 T6 aluminum and Type III hard anodized matte black to mil-spec. Both FLT Scope Mounts feature dual recoilugs to insure solid “on target” mounting.

The FLT Accucam Quick Detach Scope Mount provides you with a solid method to quickly install or remove the scope from the weapon. The scope caquickly be installed on a dovetail rail in seconds by rotating the Accucam Lever to the locked position and can just as quickly be removed by rotating theAccucam Cam Lever to the unlocked position. Unlike other QD lever systems, it is fully adjustable to t Weaver and MIL-STD-1913 dovetails, even those

that are worn or out-of-spec. The ergonomic nger loop of the lever is easily operated, even with a gloved hand, and the round design is virtually snagproof. The Accucam mechanism is manufactured from solid billet 4140 steel.

If you want to use a one inch scope with the FLT Scope Mount, the GG&G 30mm to 1 inch Scope Ring Reducer shown above is the way to go.

pAcKAge DeAl:fl Aam QD so Mont wt 30mm to 1 in Drn so n dr: ggg-1606...$204.00fl Bot On so Mont wt 30mm to 1 in Drn so n dr: ggg-1607...$161.00

fl Aam QD so Mont: ggg-1383...$190.00fl Bot On so Mont: ggg-1384...$147.0030mm to 1 in Drn so n dr: ggg-1392...$15.00

fl scOpe MOuAam QD And Bot On Mod Avaab

30mm intra n And low pro Mak itprt for at sa pro (sp)

30mm to 1 inchScope Ring Redicer

Dual Recoil Lugs

7/16/2019 Gg&g2012cat


O P T

I C A L M

O U N T I N g

s Y s

T E M s

When in a crouching, sitting or prone position the shooter tends to “creep” up on the scope. In order to provide the shooter withthe ability to gain more eye relief when in these positions, GG&G offers the AC-30 Accucam QD Mounting Base with Integra

30mm Scope Rings. The mounting base is tall enough to provide clearance for the latest large objective lens-long range optics The integrated Accucam Quick Detach Lever System provides the shooter with the ability to quickly remove the scope in order toutilize other optics as the mission may require, and have the condence of 1/2 MOA repeatability upon reinstallation.

The AC-30 Accucam QD Scope Mounting Base is ve inches long. The mounting base portion is four inches in length and withits skeletonized construction weighs only six ounces. The inside ring to inside ring dimension is 3 3/4 inches. The dual recoilugs insure “on target” performance shot after shot.

If your scope is only 1” in diameter, the GG&G 30mm to 1” ring reducers will do the trick.

Designed and manufactured to meet the rigors of combat and professional use, the AC-30 QD Mounting Base is manufactured fromsolid billet 6061 T6 aluminum alloy and has a Type III hard coat anodized matte black mil-spec nish. The Accucam detachable scope

mount mechanism is manufactured from solid billet 4140 steel and manganese phosphated matte black per mil-spec.

All edges have been dehorned to protect the operator. The base can be quickly installed on a dovetail rail in seconds by rotatingthe Accucam Cam Lever to the locked position. It can then be quickly removed by rotating the Accucam Cam Lever to the unlockedposition. Unlike many QD systems, it is fully adjustable to t Weaver and MIL-STD-1913 dovetails.

pAcKAge DeAl:Ac-30 Aam QD Montn Ba Wt 30mm intra nand 30mm to 1 in Drn so n dr: ggg-1608...$224.00 Ac-30 Aam QD Montn Ba Wt 30mm intra n: ggg-1238...$210.0030mm to 1 in Drn so n dr: ggg-1392...$15.00

Ac-30 AccucAM QD MOuig BAseWt intra

30mm so n

Easily Adapts toProper Eye Relief

t

Fully Adjusts for Worn andOut-of-Spec Dovetail Rails

t Easy OperatingFinger Loop Design

t30mm Integral Rings

34


Dual Recoil Lugs

7/16/2019 Gg&g2012cat


With the development of our proprietary Accucam Quick Detach Locking Lever System we are now able to ll many Quick Detach mountinrequirements. Currently, two models are available, the Accucam Quick Detach Standard Rail and the Accucam Quick Detach Base With Integral 30mm

Rings. The Accucam QD Integral Ring Base is available in two different heights to accommodate proper cheek welds. One is specically for the AR15/M16 weapon system and one is for bolt guns. The height of the Accucam Ring base for the AR-15/M16 is 1.460” from the top of the rail to thcenterline of the integral ring. The height of the Accucam Ring Base for bolt action ries is 1.060” from the top of the rail to the centerline of theintegral ring. The dual recoil lugs insure “on target” performance shot after shot.

The Accucam Standard Rail is ve inches long with its rail manufactured to MIL-STD-1913. It adds 1/2 inch to the height of the mounting platform

Both GG&G bases are designed and manufactured to meet the rigors of combat and professional use. Both are manufactured from solid billet 606 T6 aluminum alloy and have a Type III hard coat anodized matte black mil-spec nish. All edges have been dehorned to protect the operator. ThAccucam QD Locking Lever System provides you with a solid method to quickly install or remove the mounting base from the weapon system. Thebase can be quickly installed on a dovetail rail in seconds by rotating the Accucam Cam Lever to the locked position. It can then be quickly removeby rotating the Accucam Cam Lever to the unlocked position. It is fully adjustable to t Weaver and MIL-STD-1913 dovetails. The unique design allowyou to adjust the tension to accommodate out of spec or worn dovetails. During testing, the Accucam Locking Lever System has shown to be repeatablto 1/2 MOA. The unique nger loop design is easily operated, even with a gloved hand and the rounded design is ergonomic and virtually snag proof The Accucam mechanism is manufactured from solid billet 4140 steel and manganese phosphated matte black per mil-spec.

pAcKAge DeAl:Aam QD intra n Ba for A-15/M16 wt 30mm to 1 in Drn so n dr: ggg-1609...$213.95Aam QD intra n Ba for Bot gn wt 30mm to 1 in Drn so n dr: ggg-1610...$213.95

Aam QD standard a: ggg-1197...$155.00Aam QD intra n Ba for A-15/M16: ggg-1198...$199.95Aam QD intra n Ba for Bot gn: ggg-1199...$199.9530mm to 1 in Drn so n dr: ggg-1392...$15.00

AccucAM QuicK DeAchMOuig BAses

On Wt 30mm intra nAvailable in Two HeightsOne Specically for the AR-15/M16One for Bolt Guns

Accucam QD Standard Rail

Accucam QD Base withIntegral 30mm Rings

t


t Easy OperatingFinger Loop Design


Dual Recoil Lugs

7/16/2019 Gg&g2012cat


O P T

I C A L M

O U N T I N g

s Y s

T E M s

The Accucam Scout Length Mounting Base is designed to mount easily onto the integral rail of the AR-15/M16 at top receiveand interface with our MAD or both of our A2 Style BUIS ip up rear sights. Manufactured to MIL-STD-1913 the Accucam ScouLength Mounting Base raises the line of sight by 1⁄2-inch, offering a proper cheek weld when optical devices are attached. Therail is seven inches long and extends two inches beyond the end of the receiver and clears the M4 forearm. It was developed toaccommodate “scout” type scopes, long body scope tubes, and night vision compatible red dot sights with night vision monocularmounted to their rear. Once the optic is mounted, the integrated Accucam Quick Detach Lever System provides the shooter withthe ability to quickly remove the scope in order to utilize other optics as the mission may require, and have the condence of 1/2MOA repeatability upon re-installation. The dual recoil lugs insure “on target” performance shot after shot.

As with all GG&G products, it is designed and manufactured to meet the rigors of combat and professional use. The Accucam ScouLength Mounting Base is manufactured from solid billet 6061 T6 aluminum alloy and has a Type III hard coat anodized matteblack mil-spec nish. All edges have been dehorned to protect the operator. The base can be quickly installed on a dovetail raiin seconds by rotating the Accucam Cam Lever to the locked position. It can then be quickly removed by rotating the AccucamCam Lever to the unlocked position. Unlike many QD systems, it is fully adjustable to t Weaver and MIL-STD 1913 dovetails The patented methodology design allows you to adjust the tension to accommodate out of spec or worn dovetails. In tests, theAccucam Locking Lever System has shown to be repeatable to 1/2 MOA. The unique nger loop lever is easily operated, even with a gloved hand and the rounded design is ergonomic and virtually snag proof. The Accucam mechanism is manufactured fromsolid billet 4140 steel and manganese phosphated matte black per mil-spec.

Aam sot lnt Mil-sD-1913 Montn Ba: ggg-1236...$158.95

AccucAM QuicK DeAchscOu legh Mil-sD-1913

MOuig BAse

t

Manufactured to MeetMIL-STD-1913


t

tEasy Operating

Finger Loop Design

36

Dual Recoil Lugs

7/16/2019 Gg&g2012cat


sOcOM ii AccucAM QuicK DeAchMOu Wih 30MM iegAl igs

The SOCOM II M1A Rie is a compact, powerful close quarter combat battle rie. However its “Cluster Rail” system makes it difcult to mount aconventional low powered scope. You have to install an additional receiver mounted scope base to the SOCOM II along with a set of scope ringthat are tall enough so that the objective lens clears the top rail. If you want Quick Detach capability, you need to mount your scope on top of threceiver mounted scope base with some type of QD mount and ring combo. We think that’s a PIA and has too many interface points that couldnegatively affect the zero retention of your scope. The New Products Team at GG&G has come up with an innovative solution--- sOcOM iAam Qk Dta so Mont Wt 30mm intra n:

• The overall design provides smooth integrated appearance.• The Accucam Quick Detach System provides quick and easy on-off transitions while maintaining 1/2 MOA accuracy.• The Accucam QD System is fully adjustable to t worn or out of spec dovetails.• The SOCOM II Accucam Quick Detach Scope Mount has dual recoil lugs that interface with the recoil slots of the top dovetail rail to provide

secure recoil resistance.• Lightweight skeletonized construction -- 7.7 ozs.• 6” total length• 30mm integral rings with four cap screws per ring. Each cap screw threads into stainless steel helicoils.

• 2.5” measurement inside ring face to inside ring face allows for forward/rearward adjustment of different eye releif scopes.• 1.260” from top of the SOCOM II “Cluster Rail” to center of 30mm integral rings, provides lower scope mounting while still clearing the objective

lens of most scopes up to 50mm.• The cantilever feature of the SOCOM II Scope Base overhangs 3” to allow for additional forward/rearward adjustment for scopes with

different eye reliefs.• The underside of the SOCOM II QD Scope Mount is relief cut for unimpeded cartridge ejection.• The main body is manufactured from solid billet 6061 T-6 aluminum Type III hard anodized in a non-reective combat nish per mil-spec.• All steel components of the Accucam Quick Detach System are manufactured from 4140 ordnance steel and manganese phosphated in a non-

reective combat nish per mil-spec.

sOcOM ii Aam Qk Dta Mont Wt 30mm intra n: ggg-1433...$210.00

Thick Cantilever Feature Supports ScopeOver Ejection Port While ProvidingProtection from Ejected Brass

t

SOCOM II Accucam QDScope Mount Easily Adaptsfor Proper Eye Relief

Large Integral 30mm Scope RingsProvide Solid Scope Mounting Accucam QD System Fully Adjusts for

Worn or Out of Spec Dovetail Rails

while Retaining 1/2 MOA

Dual Recoil Lugs

7/16/2019 Gg&g2012cat


O P T

I C A L M

O U N T I N g

s Y s

T E M s

38

These two GG&G FIRE System rails are designed to mount easily over the integral rails of the AR-15/M16 at top receiver an

work in conjunction with our MAD or A2 Style BUIS ip-up rear sights. As they raise the line of sight by 1⁄2-inch, they offer proper cheek weld when optical devices are attached. In addition, they serve to protect the at top receiver’s integral rails fromthe wear associated with quick-release-type mounts. The Scout length rail extends 2 inches beyond the end of the receiver anclears the M4 forearm. It was developed to accommodate long-eye-relief “scout”-type scopes and also Aimpoint red dot sight with night vision monoculars mounted to their rear. The Standard length rail is employed mainly as a riser for conventionaoptics. CNC manufactured from tough billet 6061 T6 aluminum alloy and matte black Type III hard coat anodized, all of theGG&G FIRE System rails meet MIL-STD-1913. These rails attach to the at top receiver by means of a full-length side bar andtwo round head socket head screws. This provides both a positive and perfectly aligned lock-up even on well-worn receiver rails The socket head wrench required for installation is included.

standard a: ggg-1002. ..$75.00 sot a: ggg-1001.. .$82.95

fie syseM Ailsstandard, sot and gs-1

Our GS-1 FIRE System rail is designed for mounting a conventional-type scope on the AR-15/M16. It provides signicantlylonger eye relief for a proper scope/operator interface and the capability of attaching additional optical devices, such as night vision monocular. The back of the rail has been tapered to blend with the rear of the upper receiver and is not designedto mount a BUIS ip-up rear sight. It extends 3 inches over the handguards and clears the M4 forearm. CNC manufacturefrom solid billet 6061 T6 aluminum alloy, and Type III black hard coat anodized, the GS-1 rail meets MIL-STD-1913. As witthe other FIRE System rails, it locks onto the at top receiver by means of a locking side bar and two rounded socket head capscrews. The socket head wrench required for installation is included.

gs-1 a: ggg-1028...$89.95

Standard Length

5” Long t

Scout Length7” Long

t

7/16/2019 Gg&g2012cat


RED

D OT

OP

TI C

A C

CE s s ORI E s

les cOesfor eO 512, 552 and ps sr hoot

There is little doubt that the EOTech Holosight is one of the best red dot sights available today. However, our customers have toldus that they think it is missing an important element—LENS COVERS. We agree, so we developed a set that is easy to installand operate. The patented GG&G Lens Covers For EOTech Holosights t between the EOTech hood and the body of the EOTechhousing. Both lens covers are spring loaded so that once pressure is applied to release them from the closed position they springopen. The rear cover lays across the top, so as not to interfere with the eld of view. The front cover opens and serves as a sunshield. However, if heavy brush etc. is encountered, the front lens will fold back so that it is not damaged. Because of the contoursof the EOTech housing, these lens covers are not 100% waterproof, but they do prevent most dust, debris, rain and snow from

accumulating on the lenses. These unique lens covers can be easily operated with either hand to provide exibility of operation. The design and methodology is so unique, a patent has been issued. If you like to have a little fun with you tactical accessories, we offer the front lens cover engraved with “fO OWAD eeMy or ifiDel” at no additional charge.


When Open, Rear LensCover Folds Conveniently

on Top Of Hood t

Front Lens Cover Servesas Sun Shade t

Lens Covers Are

Spring OperatedFor Easy Operation

Inexpensive

Insurance or Your Expensive Lenses

The Lens Covers can

be Purchased with“FRONT TOWARDENEMY” or “INFIDEL” at no AdditionalCharge

eO ln covr or 512 and 552: ggg-1275...$40.00eO ln covr or ps sr: ggg-1272...$42.50

fO OWADs eeMyeO ln covr or 512 and 552: ggg-1275fe...$40.00eO ln covr or ps sr: ggg-1272fe...$42.50

ifiDeleO ln covr or 512 and 552:ggg-1275if..$40.00

eO ln covr or ps sr:ggg-1272if...$42.50

7/16/2019 Gg&g2012cat


In order to meet the many EOTech protective hood congurations, provide easy installation and keep the price point competitive, wedecided to offer our patented lens covers with an enhanced 6061 T6 aluminum hood and lens cover combo package for the EOTech

EXPS holographic scopes. For those of you that want to keep the battery retention wire set up, we have pre-drilled the hood in thesame location as the original, and have included a new battery cap retention wire and gure 8 wire clamps for your use.

The GG&G EOTech Hood and Lens Cover Combo for the EOTech EXPS is easy to install. You only have to remove the EOTech hoodand install the new GG&G hood and lens cover module. The GG&G hood is Type III hard anodized matte black to mil-spec andmatches the original EOTech nish. All of the windage and elevation calibration markings on the GG&G hood are fully engravedand present an off-white appearance to make it easier for the end user to reference.

The lens covers in the EOTech Hood and Lens Cover Combo Package are spring operated so that once pressure is applied to releasthem from the closed position, they spring open. The rear cover lies across the top, so as not to interfere with the eld of view. Thfront cover opens and serves as a sun shield. However, if heavy brush etc. is encountered, the front lens will fold back so that iis not damaged. Because of the contours of the EOTech body, the lens covers are not 100% waterproof, but they do prevent mos

dust, debris, rain and snow from accumulating on the lenses. These unique lens covers can be easily operated with either hand toprovide exibility of operation. The new combo design and methodology is so unique that we were awarded a patent.

If you like to have a little fun with your tactical accessories, we are offering the front lens cover engraved with “FRONT TOWARDENEMY” or “INFIDEL” at no additional charge.

eOech eps hOOD ADles cOe cOMBO

prott eO eps2-0, eps2-2,

eps3-0, eps3-2 and eps3-4 lnW ot ft ps2-0 or ps3-0 sr O so

R E D

D O T O

P T I C A C C E s s O

R I E s

eps hood & ln covr for 2-0 & 2-2: ggg-1424...$53.00eps hood & ln covr for 3-0, 3-2 & 3-4: ggg-1423...$53.00

fO OWADs eeMyeps hood & ln covr for 2-0 & 2-2: ggg-1424fe...$53.00eps hood & ln covr for 3-0, 3-2 & 3-4:ggg-1423fe...$53.00

ifiDeleps hood & ln covr for 2-0 & 2-2:ggg-1424if...$53.00eps hood & ln covr for 3-0, 3-2 & 3-4:ggg-1423if...$53.00

Lens Covers are Spring Operatedfor Easy Operation

Ambidextrous Operation for Tactical Flexibility

Front Lens CoverServes as a Sun

Shade

Kit Includes New Battery Cap RetentionWire and Figure 8 Crimping Sleeves

Windage and Elevation Markingsare Fully Engraved

Front Lens Cover Can Be EngravedWith “Front Toward Enemy Or

“INFIDEL” At No Additional Cost

7/16/2019 Gg&g2012cat


eOech hOOD AD les cOe cOMBOMod o ft eO 516, 517,

553, 555 and 556

Since we introduced our original patented EOTech Lens Covers for the 511, 512, 551 and 552 our customers have been asking us to develop models that would t the EOTech 516, 517, SU-231/PEQ (553), 555 and 556. In order to meet the many EOTech congurations, provide easy installation, and keethe price point competitive, we decided to offer these super lens covers with an enhanced 6061 T6 aluminum hood in a combo package.

The GG&G EOTech ip up lens cover is easy to install. You only have to remove the EOTech hood and install the new hood and lens cover module. Thnew GG&G hood is Type III hard anodized matte black to mil-spec and matches the original EOTech nish. All of the windage and elevation calibrationmarkings on the new hood are fully engraved and present an off-white appearance to make it easier for the end user to reference. The lens covers in the EOTech Hood and Lens Cover Combo Package provide the same great features as the originals. They are spring operated sothat once pressure is applied to release them from the closed position, they spring open. The rear cover lies across the top, so as not to interfere with the eld of view. The front cover opens and serves as a sun shield. However, if heavy brush etc. is encountered, the front lens will fold backso that it is not damaged. Because of the contours of the EOTech body, these rie scope lens covers are not 100% waterproof, but they do prevenmost dust, debris, rain and snow from accumulating on the lenses. These unique lens covers for scopes can be easily operated with either hand toprovide exibility of operation. The new combo design and methodology is so unique that we were awarded a patent. If you like to have a little fun with your tactical accessories, we offer the front lens cover engraved with “INFIDEL” or “FRONT TOWARD ENEMYat no additional charge.

These models of the GG&G Hood And Lens Cover Combo will t EOTech models 516, 517, SU-231/PEQ 553, 555 and 556.

As with all GG&G products, the New Hood And Lens Cover Combo for the EOTech are made in the USA.eO 516 and 517 hood and ln covr combo:ggg-1344...$50.00eO 553 and 555 hood and ln covr combo: ggg-1345...$50.00eO 556 hood and ln covr combo: ggg-1346...$50.00

fO OWADs eeMyeO 516 and 517 hood and ln covr combo front oward enm:ggg-1344fe...$50.00

eO 553 and 555 hood and ln covr combofront oward enm: ggg-1345fe...$50.00

eO 556 hood and ln covr combo frontoward enm: ggg-1346fe...$50.00

ifiDeleO 516 and 517 hood and ln covr combo ifiDel:ggg-1344if...$50.00

eO 553 and 555 hood and ln covr combo ifiDel:ggg-1345if...$50.00

eO 556 hood and ln covr combo ifiDel:ggg-1346if...$50.00

Lens Covers are Spring Operatedfor Easy Operation t

Ambidextrous Operation for Tactical Flexibility

t

GG&G HoodMatches Contours of

the Optics

t

t

t

Front Lens CoverServes as a Sun

Shade

When open, Rear Lens Cover FoldsConveniently on top of Hood

Windage andElevation Markingsare Fully Engraved

The Hood and Lens Cover Combo can bePurchased with “INFIDEL” or “FRONT

TOWARD ENEMY” Engraved on Front Coveat no Additional Cost

7/16/2019 Gg&g2012cat


T A C T I C

A L f O R E A R M A

C C E s s O

R I E s

There is little doubt that vertical foregrips have become a valued tactical accessory in military, law enforcement and civilianarenas. They provide the operator with several important advantages, from diminishing muzzle climb during burst-resequences to simply offering a more comfortable shooting stance.

The GG&G Vertical Foregrip has always provided more than the standard vertical grips - the highest quality of course, and with acore with a waterproof compartment to store batteries and other small items. Not only is it a very stable vertical grip, the waterproocompartment will accommodate an AR-15/M16 spare bolt. The interior of the “O” ring sealed waterproof compartment is conguredto securely hold a spare bolt in place - NO RATTLES HERE. The other great feature is that you don’t need a tool or coin to gain accessto the waterproof compartment. The waterproof compartment cap has been designed with an ergonomic no-snag tri-grip feature which can be opened with a gloved hand. Without the spare bolt stored, the compartment is large enough to securely hold two AAbatteries or two CR123 batteries. Three N type batteries, ring pins, ejectors, extractors or other small replacement parts for you weapon system can be stored in the compartment but the user will need to pack additional material so as to eliminate rattling. Nspecial tools are needed for installation or adjustment in the eld. The rugged vertical foregrip is 4.5” in length, 1.250” in diameteand only weighs 2.7 ounces. A separate “O” ring seals the threaded core from the combat environment.

rta forr: ggg-1169...$32.50

eicAl fOegipwt a “o oo dd”Watrroo comartmnt

“No Tools Needed” Tri-Grip Waterproof Cap

t t

Waterproof CompartmentWill Now Accomodate

Spare AR-15/M16 Bolt

t

TerrifcFeatures

42

t

Alignment View Hole

7/16/2019 Gg&g2012cat


The MIL-STD-1913 Tactical Illuminator Mounting Rail is designed to t those small tactical ashlights that are designed to directly interface with a MIL-STD-1913 rail. At a length of under two inches and a weight of just over 1/2 ounce it is as compact and l ightweight as the l ights

themselves. This new tactical light mount is machined from solid billet 6061 T6 aircraft grade aluminum alloy using modern CNC machineryAfter being dehorned and bead blasted the mount is Type III hard-coated anodized matte black to mil-spec, so as to provide a hard combaproven nish.

The MIL-STD-1913 Tactical Illuminator Mounting Rail for the AR-15/M16 series of ries can be easily installed by the operator with basic handtools. We recommend that the rail be attached to the handguard in a location where both the momentary-on (rotate counter clockwise) andconstant-on (rotate clockwise) switch assembly can be reached by the thumb of the support hand. For a right-handed operator this will usuallybe on the front of the top handguard just to the right of the centerline.

Mil-sD-1913 ata imnator forarm Montn a: ggg-1239...$25.00

Mil-sD-1913AcicAl illuMiAO

fOeAM MOuig Ail

Low Prole Design t

All Edges

Have Been Dehorned toProtect the Operator

t

7/16/2019 Gg&g2012cat


Vertical foregrips and other accessories mounted at the 6 o’clock position on shoulder red weapons have become prominent in military

law enforcement and civilian arenas. However, not every agency or individual for that matter can afford or justify the purchase oa forearm assembly surrounded by multiple rails, when all they want to do is add a vertical foregrip or ashlight to the weaponOver nine years ago, GG&G introduced an inexpensive but mission ready Under Forearm Integrated Rail (UFIR) that permits instaninstallation and removal of most vertical foregrips, ashlights and numerous other accessories on the AR-15/M16 weapon systems The GG&G UFIR can easily be installed onto the underside of an AR-15/M16 forearm, standard or M4, using simple hand tools and small amount of Loctite 262. The three point mounting system insures a solid, rugged mounting platform while providing maximumfunctionality. Installation does not require permanent alteration to the forearm. Detailed instructions and all of the parts required arsupplied in the kit. The UFIR is manufactured from solid 6061 T6 billet aluminum alloy and is Type III hard-coat anodized matte blacper mil-spec to provide combat durability. The GG&G UFIR is 4 5/8 inches long, provides eleven mounting cross lugs and is machineto MIL-STD-1913 specications so as to provide tactical exibility in accessory mounting. It is lightweight too-at only 1.6 ounces.

ufi: ggg-1055...$27.95

A-15/M16 uDe fOeAMiegAeD Ail (ufi)

A std b patnn

Arna for pM sodr proram

The most cost eective way tomount a vertical oregrip,Bipod, or other weapon accessory

GG&G UFIR

Side ViewVery Low Prole Conguration

t

GG&G UFIRBottom View

All Edges Have BeenDe-Burred to Protect

the Operator

t

44

C O M B A T

L I g

h T

M O

U N T s

7/16/2019 Gg&g2012cat


Offse AcicAl flAshligh MOufor u Wt rta forr

Flashlights attached to shoulder-mounted weaponryare a necessary requirement for urban warfareUntil now, attempting to use a tactical ashlight in

conjunction with a vertical foregrip resulted in threescenarios: 1. Purchase an expensive combinationvertical foregrip/ashlight. 2. While trying tomaintain a grip on the vertical foregrip, attempt anuncomfortable and dangerous rotation of the griphand to try to get the thumb high enough to engagthe rear of the ashlight typically mounted at thethree o’clock or nine o’clock position (strong lefshooter). 3. Use an expensive and somewhat messypig tail with a pressure pad glued to the foregrip oforearm that could hang you up at a critical time.

GG&G’s innovative design staff has solved theproblem of interfacing a vertical foregrip with a weapon mounted ashlight by creating the Offse Tactical Flashlight Mount For Use With VerticaForegrips. It places the tactical ashlight, offset tothe right or left of the weapon’s the illuminator’rocker switch laser button or rear pressure buttonof other tactical ashlights, while the support handremains solidly on the vertical foregrip. The Offse Tactical Flashlight Mount For Use With VerticaForegrips comes with the MIL-STD-1913 rail. It is a

lightweight accessory— only 2.7 ounces.

The Offset Tactical Flashlight Mount For UseWith Vertical Foregrips can be mounted on theGG&G UFIR, or any of the GG&G Tactical ModulaForearms, or any other integrated rail system This ambidextrous mount is attached by means oa squeeze rail. Manufactured from aircraft grade6061 T6 billet aluminum alloy, it has been Type IIhard coat anodized per mil-spec in a matte blackcombat nish.

Ot ata fat Mont:ggg-1131...$62.00

On in Montn n:ggg-1195...$17.00

g2 Montn n:ggg-1389...$17.00

GG&G One InchMounting Ring t

7/16/2019 Gg&g2012cat


C O M B A T

L I g

h T

M O

U N T s

There is little doubt that weapon mounted tactical ashlights are an all important accessory for urban combat. GG&G manufactureover ten different tactical ashlight adapters for various weapon systems. There is also little doubt that the HK USP handgun is one othe ten best handguns manufactured. Unfortunately, HK chose to manufacture the dust cover integral mounting rail to only accept theURL ashlight. Besides being very expensive, large and heavy, the URL lacks the exibility to be mounted to other weapon systems.

Our highly regarded design engineering staff developed an innovative and clever mount to interface the M3/M6, TLR-1 and 2 with the USP Standard and Compact handguns in a small and lightweight package. As can be seen in the photographs, the GG&G

Slim Line USP Adapter ts tightly to the USP trigger guard allowing the Streamlight and ITI rear rocker switches to be activatedby the re control nger or the thumb of the off hand. The Slim Line USP Adapter is available for the full size, and compact UShandguns in 9mm, .40 and .45 calibers.

The GG&G Slim Line USP Adapter consists of a three piece lightweight aluminum adapter that easily clamps over the existing USlight rails. The installation only requires a small wrench, included in the package. The rail ts tight enough to retain zero of theM6 laser. The GG&G Slim Line USP Adapter is machined from solid billet 6061 T6 aircraft-grade aluminum alloy using modern CNCmachinery, and then Type III hard coat anodized matte black per mil-spec for combat durability.

usp Adatr f sz: ggg–1133...$51.00usp Adatr comat: ggg-1134...$51.00

sliM lie hK usp ADApeAommodat stramt l-1/l-2 &

ii M3/M6USP Compact with TLR-1

t

Enlarged View ofFull-Size Application

t

46

Rugged andRepeatable

7/16/2019 Gg&g2012cat


The GG&G One Inch Mounting Ring provides an inexpensive yet rugged dovetail mounting interface for ashlights or other small accessories. The bodis manufactured from 6061 T6 aluminum alloy and Type III hard coat anodized matte black per mil-spec. All steel components have a manganesphosphate matte black nish per mil-spec. At 1.3 ounces, it provides a lightweight method of attaching a tactical ashlight to your rearm.

The owners of the Streamlight TL2 and TL3 ashlights have continually commented to us about the need for a small, lightweight, inexpensive rinbeing available to mount their ashlights to AR-15s or other weapon systems. With a ashlight outside diameter of .900” the GG&G One InchFlashlight Mounting Ring was too large, but the New .900” Flashlight Mounting Ring Insert will now allow them to install their ashlights inexpensivelyManufactured from Delrin to an inside diameter of .900”, this new insert easily slips onto the ashlight and then installs into the GG&G One InchFlashlight Mounting Ring. Once the ring cap is tightened, the ashlight is solidly mounted in place and ready to be installed on the weapon. The .900” Flashlight Mounting Ring Insert can be purchased as a package with the GG&G One Inch Flashlight Mounting Ring or by itself for those thaalready have our ring. Either way, it is a great way to mount the smaller diameter ashlights.

On in Montn n: ggg-1195...$17.00.900” fat Montn n inrt: ggg-1248...$11.00On in Montn n And .900” inrt: ggg-1249...$23.00

Oe ich MOuig igAD .900” flAshligh

MOuig ig ise

d On in n to .900”

Large Knurled Thumbnutfor Ease of Attachment

t

Reduces One Inch Ringto .900” to Accommodate Streamlight TL2, TL3 andOther .900” Diameter Flashlights

t

t

Simple FlatheadScrews

• Lightweight

• Rugged

• Inexpensive

7/16/2019 Gg&g2012cat


C O M B A T

L I g

h T

M O

U N T s

48

The GG&G G2 Flashl ight Mounting Ring provides an inexpensive yet rugged dovetail mounting interface manufactured specically for the Surere G2 and G3 tactical ashlights. The G2 and G3 ashlights have a main tube diameter between 1.015and 1.030 inches. The GG&G One Inch Flashlight Mounting Ring is too small and a 30mm scope ring is too large, so GG&Gdecided to manufacture an inexpensive yet sturdy ashlight mounting ring specically for the G2 and G3 ashlights. This ring will allow you to mount your ashlight directly to the dovetail on a weapons ashlight mount like the GG&G Offset TacticaFlashlight Mount. The body of the G2 Flashlight Mounting Ring is manufactured from 6061 T6 aluminum alloy and Type IIhard coat anodized matte black per mil-spec. All steel components have a manganese phosphate matte black nish per milspec. At 1.3 ounces, it provides a lightweight method of attaching a Surere G2 or G3 tactical ashlight to your rearm.

g2 fat Montn n: ggg-1389...$17.00

g2 flAshlighMOuig ig

A ok sod fat

Montn patorm

An Inexpensive and SolidWay to Mount Your SurefreG2 or G3 Flashlight to Your Weapon

The Surere G2 & G3 Tactical Flashlights Have an OutsideDiameter of 1.015” to 1.030”. One Inch Rings are too Smalland 30mm Rings are too Large. Our G2 Ring is ManufacturedSpecically to Fit the Nitrolon Tactical Flashlights without theNeed for Additional Spacers.

7/16/2019 Gg&g2012cat


A-15/M16 eceie eD plAeQD slig MOu Wih ehAceDQD slig sWiel On swv to

Aommodat Wbbn and On or hK snahook and Ma hook

A-15/M16 vr end pat sn Mont Wt enand hav Dt Qk Dta tanar snswv Or Anar sn swv:

• Easy to install.• AR-15/M16 Receiver End Plate QD Sling Mount installs directly behind the receiver.• Provides fast Quick Detach Sling Swivel capability.• Package includes your choice of either the Custom GG&G Rectangular Heavy Duty QD Sling Swivel With Enhanced Tactile

Push Button or the Custom GG&G Angular Heavy Duty QD Sling Swivel With Enhanced Tactile Push Button.• GG&G Custom Heavy Duty Rectangular QD Sling Swivel will accommodate 1 1/4” sling webbing.• GG&G Custom Heavy Duty Angular QD Sling Swivel will accommodate HK style snap hooks and mash hooks.• AR-15/M16 Receiver End Plate QD Sling Attachment can be used in a two point sling set up or as a single point sling attachment.• GG&G Custom Heavy Duty Rectangular QD Sling Swivel is ambidextrous.• GG&G Custom Heavy Duty Angular QD Sling Swivel can be installed for use by left handed shooters.• Manufactured from 4140 ordnance steel and manganese phosphated matte black per mil-spec.

vr end pat QD sn Attamnt Wt ctom hD tanar QD sn swv for Wb sn:ggg-1422...$37.00

vr end pat QD sn Attamnt Wt ctom hD Anar QD sn swv for sna hook:ggg-1417...$39.95

AR- 1

5 / M1 6 s

LI N g

A

TTA ChMENT s

Custom Heavy Duty Angular Sling Swivelfor Snap Hooks and Mash Hooks

Enhanced Heavy Duty Sling Swivelfor 1 1/4” Webbing

7/16/2019 Gg&g2012cat


A R - 1 5 / M 1 6 s L

I N g

A T

T A C h M

E N T s

50

Or hav Dt Qk Dta sn swv Amb nd:

HEAVY DUTY QUICK DETACH RECTANGULAR SLING SWIVEL WITH ENHANCED QD RELEASE BUTTON:• Heavy duty components.• Large recessed QD release button.• QD Release button has custom CNC machined concentric tactile grooves for more precise and more positive nger

or thumb placement.• Heavy duty sling retention wire will accommodate webbing up to 1 1/4”.• Manganese phosphated matte black nish per mil-spec.

HEAVY DUTY QUICK DETACH ANGULAR SLING SWIVEL WITH ENHANCED QD RELEASE BUTTON:• Heavy duty components.• Large recessed QD release button.• QD Release button has custom CNC machined tactile grooves for more precise and more positive nger or thumb placement.• Heavy duty sling retention wire is angular shaped in order to place the HK style quick clips or mash hooks in the

optimum position.• Manganese phosphated matte black nish per mil-spec.

hav Dt Qk Dta tanar sn swv Wt enand QD a Btton: ggg-1418...$12.75hav Dt Qk Dta Anar sn swv Wt enand QD a Btton: ggg-1419...$15.50

heAy Duy ehAceDQD slig sWiels

On Qk Dta swv to Aommodat

Wbbn and On or hK stsna hook and Ma hook

These Heavy Duty QD Sling Swivels Feature Large Recessed QD Release Buttons with Enhanced Tactile Finger Grooves and Heavy Duty Wire

Angular Sling Attachment Provides QuickEngagement and Better Swivel Placement for

HK Style Snap Hooks

7/16/2019 Gg&g2012cat


sADAD slig higsfront And ar

It is generally accepted that tactical slings should be mounted on the side of the weapon to prevent rie roll, and provide the shooter a more comfortablegrip for both the re control hand and support hand.

The GG&G “Sling Things” provide a lightweight, durable, easy-to-install and inexpensive method to provide a rock solid side sling mount. Our StandarFront Sling Thing installs easily onto the AR-15/M16’s “A-frame” front sight assembly, with the swivel on either the right or left side, using socket head

cap screws. Mounted high in this manner “rie roll” is completely prevented. The Rear Sling Thing is designed for easy attachment to the side of theAR-15/M16 collapsible stock including the newer ribbed models. The standard Sling Thing uses 1 1⁄4-inch sling swivels. Manufactured from tough 6061 T6 billet aluminum alloy, the Sling Thing is Type III hard coat anodized in a matte black combat nish.

For those individuals that have a GG&G Sling Thing that would also like the exibility of a mounting rail, the SLiC Thing MIL-STD-1913 rail can bepurchased separately and can be substituted for the non swivel side of the Standard Sling Thing.

GG&G Standard Rear SLING THING

t

tGG&G Standard FrontSLING THING

pAcKAge DeAl: standard front sn n and standard ar sn n: ggg-1603...$62.00 standard front sn n: ggg-1009...$31.95standard ar sn n: ggg-1010...$36.95slc n Mil-sD-1913 a: ggg-1229...$23.00

t

MIL-STD-1913 Rail

7/16/2019 Gg&g2012cat


QuicK DeAch slig higsfront And ar

Over the past ve years it has become generally accepted that tactical slings should be mounted on the side of the weapon to prevenrie roll, and provide the shooter a more comfortable grip for both the re control hand and support hand.

The GG&G “Sling Things” provide a lightweight, durable, easy-to-install and inexpensive method to provide a rock solid side slingmount. Our Quick Detach Front Sling Thing installs easily onto the AR-15/M16’s “A-frame” front sight assembly using opposingsocket head cap screws and is fully ambidextrous. Mounted high in this manner “rie roll” is completely prevented. The Quick DetachRear Sling Thing is designed for easy attachment to the side of the AR-15/M16 collapsible stock including the newer ribbed modelsand is also ambidextrous. The QD Sling Thing utilizes sturdy heavy duty 1 1⁄4-inch QD sling swivels included in the package. The

heavy duty QD swivel has a larger quick detach button for an easier and quicker transition and a thicker wire diameter to provide amore robust sling attachment surface. Manufactured from tough 6061 T6 billet aluminum alloy, the QD Sling Thing is Type III hardcoat anodized in a matte black combat nish.

For those individuals that have a GG&G Sling Thing that would also like the exibility of a mounting rail, the SLiC Thing MIL-STD-1913 rail can be purchased separately and can be substituted for one of the sides of the QD Sling Thing.

pAcKAge DeAl: QD sn n front Wt hav Dt QD swv and QD sn n ar Wt hav Dt QD swvggg-1604...$71.00

QD sn n front Wt hav Dt QD swv: ggg-1011hD...$38.95QD sn n ar Wt hav Dt QD swv: ggg-1012hD...$42.00slc n Mil-sD-1913 a: ggg-1229...$23.00

Includedin Package

HD QD Sling Swive t

GG&G QD RearSLING THING with

Heavy Duty Sling Swivel t

GG&G QD FrontSLING THING with

Heavy Duty Sling Swivel

t

A R - 1 5

/ M 1 6 s L

I N g

A T

T A C h M

E N T s

7/16/2019 Gg&g2012cat


slig hig for Dovta

Edges areChamfered andDe-Burred toProtect the Operator

t

Full 1 1/4 inchCoated mil-spec

Sling Swivel

t

Lightweight,

Durable, Easily Mounted andInexpensive

As the use of the tactical forearm, such as the GG&G Modular Tactical Forearms have become more prevalent by special operations personnel andlaw enforcement SWAT teams, the need to easily mount a sling to the dovetail rails of the tactical forearm has become necessary. It was for thisreason that GG&G developed a Sling Thing specically for dovetail congurations. Although it is now generally accepted that tactical slings shouldbe mounted on the side of the weapon, ancillary equipment mounted on the sides of the tactical forearms make this difcult or impossible to do The GG&G Sling Thing For Dovetails provides the exibility to mount the front sling attachment anywhere on the tactical forearm rails that meethe mission requirement. As with all of our “Sling Things”, this addition to the product line provides a lightweight, durable, easy-to-install andinexpensive method for front sling attachment. The Sling Thing uses a 1 1/4-inch sling swivel, and is manufactured from tough 7075 billet aluminumthat has been Type III hard coat anodized in a matte black mil-spec nish.

sn n for Dovta: ggg-1203...$35.00

7/16/2019 Gg&g2012cat


QuicK DeAch slig higfor Dovta

As the use of tactical forearms, such as the full line of GG&G Modular Tactical Forearms have become more prevalent by speciaoperations personnel and law enforcement SWAT teams, the need to easily mount a sling to the dovetail rails of the tactical forearmhas become necessary. It was for this reason that GG&G developed a Sling Thing specically for dovetail congurations . We have

been advised by our tactical advisors that there are mission requirements that require the sling to be quickly detached from the weapon. In response to that need we have developed the Quick Detach Sling Thing For Dovetails. This Sling Thing provides thexibility of quickly detaching the sling by the use of a rugged heavy duty 1 1/4” QD sling swivel which is included in the package The heavy duty QD swivel has a larger quick detach button for an easier and quicker transition and a thicker wire diameter to providea more robust sling attachment surface. When coupled with the GG&G QD Rear Sling Thing, the sling can be quickly removed fromthe weapon. The new GG&G Quick Detach Sling Thing For Dovetails provides the exibility to mount the front sling attachmenanywhere on the tactical forearm rails that meet the mission requirement. As with all of our “Sling Things”, this latest addition to theproduct line provides a lightweight, durable, easy-to-install and inexpensive method for front sling attachment. The latest Sling Thingis manufactured from tough 7075 billet aluminum alloy and is Type III hard coat anodized matte black per mil-spec.

Qk Dta sn n for Dovta Wt hav Dt QD sn swv: ggg-1271hD...$46.95

54

StrongQuick Detach

Heavy DutyQD Sling Swivel

t

A R - 1 5 / M 1 6 s L

I N g

A T

T A C h M

E N T s

7/16/2019 Gg&g2012cat


he slic higslig AD ligh cOMBO MOu

standard And QD

The SLiC Thing (Sling And Light Combo) provides the end user with a lightweight, sturdy, versatile and inexpensive method to attach a sling on onside of the weapon and a 2 1/8-inch MIL-STD-1913 rail to mount accessories such as a tactical ashlight, on the other side. The light is positionedat one o’clock, the location preferred by most experienced operators to maximize the tactical advantage during dynamic room entries. In additionmost experienced operators prefer that tactical slings be mounted on the side of the weapon, as high as possible to prevent “rie roll”. The SLiC Thinsolves this issue by easily mounting onto the AR-15/M16 “A-frame” front sight assembly and is fully ambidextrous.

Two models are available, the Standard SLiC Thing and the The QD SLiC Thing With Heavy Duty Sling Swivel. The sling swivels on both models wiaccommodate slings up to 1 1/4 inch wide. The heavy duty QD swivel has a large quick detach button for an easier and quicker transition and

a thicker wire diameter to provide a more robust sling attachment surface. Both models are manufactured for rugged use out of 6061T6 solialuminum alloy and are Type III hard coat anodized matte black per mil-spec. Robust and rigid, the SLiC Thing is held in place by counter pressursteel socket head cap screws.

With the addition of the GG&G one inch mounting ring as shown in the above images, the SLiC Thing will accommodate most of the excellent oneinch diameter ashlights available today.

For those individuals that have a GG&G Sling Thing that would also like the exibility of a mounting rail, the SLiC Thing MIL-SPEC 1913 rail can be purchasedseparately and can be substituted for the nonswivel side of both the Standard Sling Thing and the QD Sling Thing.

slc n: ggg-1227...$37.95QD slc n Wt hav Dt sn swv: ggg-1228hD...$48.00

MIL-STD-1913 Rail canbe purchased separatelyand can be used with the

GG&G Sling Thing.

t

Lightweight And Versatile

GG&G One InchMounting Ring

t

Heavy DutyQD Sling Swive t

slc n Mil-sD-1913 a: ggg-1229...$23.00On in fat n: ggg-1195...$17.00

7/16/2019 Gg&g2012cat


t

t

t

Tactical Slings attached to the AR-15/M16 Carbine at a single mounting point without the use of the front sling swivel, are extremelpopular in both military and law enforcement special operations circles. These systems permit the operator to mount the weaponon either the primary or offside shoulder. As a result, during dynamic entries it becomes easier to “slice the pie” at doorways andmove around corners, whether they are on the right or left side, without “telegraphing” the operator’s presence.

GG&G manufactures a Receiver End Plate Sling Adapter for this purpose. With this innovative accessory the operator can now attachthe sling directly behind the receiver, in front of the collapsible buttstock. This only requires replacement of the factory receiver endplate with the new end plate containing an integral sling mounting point. It’s a perfect factory replacement. This series of GG&GReceiver End Plate Sling Adapters can also be used to attach a conventional sling in conjunction with the front sling swivel. A signicanadvantage of this set up is that expanding or collapsing the buttstock does not affect the sling length. If you wear body armor, a

tactical vest or a jacket, you no longer need to re-adjust the sling length due to the extra apparel.

GG&G offers several Receiver End Plate Sling Adapters for collapsible stocks. They are designed for professional use being machinefrom AS-35 Geneva steel and are manganese phosphated matte black per mil-spec. They can easily be installed by the operator. Alparts are de-burred to reduce wear on the sling webbing. One of our Receiver End Plate Sling Adapters has a rectangular sling slotthat will accept sling webbing up to 1 1/4” wide. It is available in right hand, left hand and an ambi version. Our Looped versionsling attachment features right hand or ambidextrous mounting rings for attaching springloaded clips like those found on the Chalke Tactical Sling or the snap hook combat-carry-type slings.

eceie eD plAeslig ADApesfor coab stok

All Edges Have BeenDe-Burred to Protect

the Operator

t

t hand tanar ron: ggg-1072...$27.50lt hand tanar ron: ggg-1072l...$27.50Amb tanar ron: ggg-1072-A...$30.50

56

Amb lood ron: ggg-1048...$27.50t hand lood ron: ggg-1049...$27.50

A R - 1 5 / M 1 6 s L

I N g

A T

T A C h M

E N T s

7/16/2019 Gg&g2012cat


MULTI-USE AR-15/M16RECEIVER END PLATE SLING ADAPTER

For Collapsible Stocks (MURP)

When you look at the 195 products we manuacture, it is easy to see that we provide our customers multiple options and the ability to be fexible itheir solutions to tactical encounters. So when our customers requested that we manuacture a receiver end plate sling adapter or collapsible stockthat allows them the ability to use both the standard sling webbing or attachment, or the HK style snap clips or attachment, we were happy to obligeOur Multi-Use Receiver End Plate Sling Adapter For Collapsible Stocks (MURP) is a result o those requests. It is available in right hand, let hand, anambidextrous congurations and easily installed. All models will accept up to 1 1/4 inch webbing or traditional sling attachments, and has a specia

annular eature that allows those slings with HK style snap hooks to be used without having to change out the receiver end plate sling adapter. Thiinnovative adapter not only allows the use o two dierent attachment methods, but also allows or the use o single point slings and the attachmeno a conventional sling in conjunction with the ront sling swivel. As can be seen in the photographs, the attachment eatures have been kept low sthat they do not interere with the charging handle.

As with all GG&G Receiver End Plate Sling Adapters, this one is designed or proessional use being machined at our acility rom AS-35 Genevsteel. O exceptionally high quality, this amous Swiss steel eatures molecular structure with elongated grains or added toughness. It has amanganese phosphate matte black nish per mil-spec.

Multi-Use AR-15/M16 Receiver End Plate Sling Adapter Rt Hand: GGG-1224...$27.50Multi-Use AR-15/M16 Receiver End Plate Sling Adapter Left Hand: GGG-1224L...$27.50Multi-Use AR-15/M16 Receiver End Plate Sling Adapter Ambi: GGG-1224A...$30.50

t

t

7/16/2019 Gg&g2012cat


A R - 1 5 / M 1 6 S L

I N G A T

T A C H M

E N T S

The Agency Rear Sling Attachments Rectangular For AR-15 Collapsible Stocks oers the end user a more consistent t than ouearlier versions. You may not know this, but some o the recoil tubes being produced are smaller in diameter than the originaland smaller than the Mil-Spec units. Our upgraded design easily and securely astens onto the castle lock nut versus the tube sovarious size recoil tubes are no longer an issue. The Agency Sling Attachment installs without removing the castle nut and no toolare required except or the included 9/64” wrench to tighten the astening screw o the Agency Rear Sling Attachment. These arespecically designed to accommodate AR-15 slings up to 1 1/4” wide. The ergonomic design does not interere with the charginghandle operation, even the larger units like the Gas Buster.

The AR-15 Agency Rear Sling Attachments Rectangular are available in right hand, let hand and ambi, and are manuactured oproessional use rom 7075 aluminum alloy and Type III hard coat anodized in a non-refective combat nish per mil-spec.

Although commonly used as a single mounting point, the GG&G Agency Rear Sling Adapters Rectangular can also be used toattach a conventional sling in conjunction with the ront sling swivel. A signicant advantage o this sling mount is that expandingor collapsing the buttstock does not aect the sling length. I you wear body armor, a tactical vest or a jacket, you no longer needto re-adjust the sling length due to the extra apparel.

I a looped style AR-15 sling attachment that accepts HK style snap hooks better serves your mission requirements, then check outthe Agency Sling Attachments Looped.

Agency Rear Sling Attachment Rectangular Right Hand: GGG-1187....$31.50Agency Rear Sling Attachment Rectangular Left Hand: GGG-1187L....$31.50Agency Rear Sling Attachment Rectangular Ambidextrous: GGG-1188....$31.50

AGENC REAR SLINGATTACHMENTS RECTANGULAR

For AR-15 Collapsible Stock Models

Accommodates AR-15 Slings up to 1 1/4”

58

Right Hand Rectangular Model orSlings up to 1 1/4”

Let Hand Rectangular Model or

Slings up to 1 1/4”

Ambidextrous Rectangular Modelor Slings up to 1 1/4”

No Charging Handle Interference Even With the Gas Buster Charging Handle

7/16/2019 Gg&g2012cat


No Charging Handle Interference Even With the Gas Buster Charging Handle

The Agency Rear Sling Adapter Looped For AR-15 Collapsible Stocks oers the end user a more consistent t than our earlier version. You may noknow this, but some o the recoil tubes being produced are smaller in diameter than the originals and smaller than the Mil-Spec units. Our upgradeddesign easily and securely astens onto the castle lock nut versus the tube so various size recoil tubes are no longer an issue. The AR-15 Agency SlingAttachment Looped installs without removing the castle nut and no tools are required except or the included 9/64” wrench to tighten the asteningscrew o the Agency Sling Attachment. The AR-15 Agency Sling Attachments Looped are specically designed to accommodate HK style snap hooks omash hooks. The ergonomic design does not interere with the charging handle operation, even the larger units like the Gas Buster.

In addition to the enhanced mounting eatures, we are now oering two Heavy Duty Steel models. Manuactured rom 4140 steel and magphosphated black per mil-spec, the Heavy Duty Agency Sling Adapters oer the user incredible longevity when used continuously in extreme and

hostile combat environments. These HD AR-15 Sling Attachments are available in both the Right Hand Looped model and the Ambi Looped model. The standard Agency Rear Sling Adapters Looped are available in right hand and ambi, and are manuactured or proessional use rom 7075aluminum alloy and Type III hard coat anodized to meet mil-spec.

Although commonly used as a single mounting point, the GG&G AR-15 Agency Rear Sling Adapters Looped can also be used to attach a conventionasling in conjunction with the ront sling swivel. A signicant advantage o this sling mount is that expanding or collapsing the butt stock does not aecthe sling length. I you wear body armor, a tactical vest or a jacket, you no longer need to re-adjust the sling length due to the extra apparel.

Agency Rear Sling Attachment Looped Right Hand: GGG-1265....$31.50Heavy Duty Agency Rear Sling Attachment Looped Right Hand: GGG-1265HD....$37.50Agency Rear Sling Attachment Looped Ambidextrous: GGG-1189....$31.50Heavy Duty Agency Rear Sling Attachment Looped Ambidextrous: GGG-1189HD ....$37.50

AGENC REAR SLINGATTACHMENTS LPED

For the AR-15 Collapsible Stock Accommodates

the HK Style Snap Hooks or Mash Hooks

Heavy Duty all Steel Right

Hand Looped Model orHK Style Snap Hooks

Ambidextrous Looped Modelor HK Style Snap Hooks

Heavy Duty all SteelAmbidextrous Looped Model

or HK Style Snap Hooks

Right Hand Looped Model

or HK Style Snap Hooks

7/16/2019 Gg&g2012cat


A R - 1 5 / M 1 6 S L

I N G A T

T A C H M

E N T S

Tactical slings attached to shoulder-mounted weapons at a single mounting point-without the use o the ront sling swivel, are extremelypopular in both military and law enorcement special operations. These systems permit the operator to mount the weapon on eithethe primary or oside shoulder. As a consequence, during dynamic entries it becomes easier to “slice the pie” at doorways and tomove around corners, whether they are on the right or let side, without “telegraphing” the operators presence.

The GG&G line o Receiver End Plate Sling Adapters or AR-15/M16 series weapons has been expanded to include the AR-15/M16 xed stock model. The Standard Model has an integral sling mounting point capable o accepting 1 1/4” sling material

The other model aords the shooter that preers the snap hook attachment an alternative to just hooking into a standard slingattachment. Installation o this unique accessory is easily accomplished, requiring removal o the xed buttstock and installationo the new GG&G Receiver End Plate, adapter spacer and longer screw, all included in the package. This lightweight accessory weighs in at less than one ounce and does not interere with the charging handle or orward assist.

All o the GG&G Receiver End Plate Sling Adapters can be used to attach conventional slings in conjunction with the weaponront sling swivel. The GG&G AR-15/M16 Receiver End Plate Sling Adapter For Fixed Stocks is machined rom 7075 billealuminum and is Type III hard-coat anodized matte black and is available in right and let hand congurations.

Receiver End Plate For Fixed Stocks: GGG-1130...$37.50Receiver End Plate For Fixed Stocks Left Hand: GGG-1130L...$37.50Fixed Stock Receiver End Plate For HK Style Snap Hooks: GGG–1073...$37.50

Exciting Gear for the Urban Warrior

RECEIVER END PLATESLING ADAPTER

For Fixed Stocks, Standard And

HK Style Snap Hook Models

t

All Edges Have BeenDe-Horned to Protect

the Operator

60

All Edges Have BeenDe-Horned to Protectthe Operator

7/16/2019 Gg&g2012cat


SLING THINGSFor HK Style Snap Hooks

or Mash Hooks

Snap Hook Sling Thingor Dovetails

t

Snap Hook Rear Sling Thingor Collapsible Stocks

t

The HK Style snap hooks have grown in popularity as a way to attach a sling to the AR-15/M16 weapon system. Because o the lack o analternative method, most shooters have just clipped into a standard sling swivel. Although this works, it is noisy and provides a loose and sloppy

sling attachment. GG&G has developed a great lightweight and rugged alternative to clipping into the standard sling swivel. The GG&G Sling Thing or Snap Hooks is available in three ully ambidextrous congurations: one that attaches to dovetails such as those ound on tacticaorearms, one that attaches to the standard ront sight “A-rame”, and one that attaches to the collapsible stock. All congurations are easy toinstall and lightweight. None o these attachments weigh more than 1.5 ounces and are CNC machined to be non-binding. These GG&G Sling Things or Snap Hooks are manuactured rom tough billet 7075 aluminum alloy and Type III hard coat anodized in a non-refective matte blackcombat nish per mil-spec.

Snap Hooks Sling Thing For Dovetails: GGG-1294...$35.00Snap Hooks Sling Thing For Front Sight: GGG-1295...$31.95Snap Hooks Sling Thing Rear For Collapsible Stock: GGG-1296...$36.95

Snap Hook Sling Thing orStandard Front Sight

t

7/16/2019 Gg&g2012cat


Designed or the real world, the Giles Tactical Sling

brings a new world and useul meaning to the term“shooting sling.” Presently in use with many major lawenorcement tactical teams across the country, this slingis also gaining acceptance in military special operationand knowledgeable personal deense circles. It is highlyacclaimed or its saety, simplicity and speed. Its designeGiles Stock would have it no other way.

Like all Wilderness Tactical products, this sling imanuactured to exceptionally high standards o designand is constructed rom the nest materials availableWe use 1.25” treated, extra heavy duty black nylon webbing (supports weight much better than 1” materialand black low refective polymer hardware.

The webbing is much more rigid than typical inexpensive webbing. It holds its orm well when getting into or ouo the sling (much like leather), and holds up muchbetter under rough eld conditions than sot, shapeles webbing. We pay more to use the best materials, but wedon’t think you would want it any other way. As alwaysconnections are multi-stitched and backstitched.

When worn properly or a right-handed operatorthe webbing is over the top o the right shoulder andsupporting the weight o the rife. It passes around theback and under the let armpit to the orend o the gun where it is attached to the slider buckle. The webbinattached to the orend passes back through thislider, then passes through another at the rear stockattachment point beore going up over the shoulderProperly adjusted, the butt o the rife should sit jusbelow the right shoulder at about mid-chest level. Thebutt o the weapon should rest naturally in the shoulde

pocket when the weapon is brought up on target. Whenreleased, the rife hangs vertically against the user’chest with the muzzle aimed straight, or slightly angledto the ground. This allows you to use your hands withoulosing control or access to your primary weapon andmakes operations such as transitioning to a secondary weapon, opening doors or checking a map (just toname a ew) signicantly easier.

GILES TACTICAL SLINGS

Manufactured toExceptionally High Standards of Design andConstruction from theFinest Materials Available

62

T A C T I C A L S L

I N G S

7/16/2019 Gg&g2012cat


AR-15/M16 Fixed Rear Stock/Tri-Glide Front*:GGG-1164...$46.00

AR-15/M16 Fixed Rear Stock/Wrap AroundFront: GGG-1168...$49.95

CAR-15/M16 Collapsible Rear Stock/Tri-GlideFront*: GGG-1165...$25.00

CAR-15/M16 Type II Collapsible Rear Stock/Tri-Glide Front*: GGG-1166...$25.00

CAR-15/M16 Collapsible Rear Stock/WrapAround Front: GGG-1172...$35.00

AR-15/M16/Steyr Aug Is Used With GG&GFront And Rear Sling Things And/r GG&GReceiver End Plates**: GGG-1162...$20.00

Single Point Sling For The AR-15/M16 AndShotguns: GGG-1163...$25.00

Single Point Sling With HK Style Snap Hook:GGG-1394...$29.50

Benelli M1S90 Fixed Stock: GGG-1173...$35.00

Remington 870/1187 Fixed Stock Tri-GlideFront: GGG-1167...$46.00

Mossberg 590/A1 Fixed Stock/Tri-Glide Front:GGG-1174...$46.00

* The Tri-Glide Front is for use with the GG&G FrontSling Attachments or the Colt Style barrel mountedfront sling attachment

** The AR-15/M16/Steyr Sling is recommendedfor use on The AR-15, M16, CAR-15, Remington

870/1187 or Mossberg 590 rearms, when usingthe GG&G Front And Rear Sling Attachments and/orGG&G Receiver End Plates.

GILES TACTICAL SLINGSApplications And Pricing

Designed for theReal World

7/16/2019 Gg&g2012cat


It’s been said that a long gun without a sling is lika handgun without a holster. We strongly believthat to be a true statement but, not all slings arecreated equal. Our CQB 3 Point Tactical Slings arsimple, versatile, durable, and aordable. The 3point sling design is nothing new, however, we’vrened the design to deliver a truly unctional slin which works.

All o our CQB Tactical Slings are made rom heavyduty 1.25” wide nylon webbing which is durable, ye

comortable, and doesn’t abrade the skin or generata noise signature. We use only the best qualityhardware and hook and loop asteners. All o ouslings are sewn by skilled technicians on industriamachines using heavy duty nylon thread with astress points reinorced or maximum durability.

Since 2004 all o our CQB Slings are ully modulaand ully ambidextrous. Utilizing the same ronand rear adapters as our SOP Sling Series, CQBSlings can be easily set up or let or right han

applications. Additionally, our CQB Slings can alsbe completely disassembled should you changyour weapon conguration or wish to add eatureto your sling.

Our Universal CQB Slings are designed to t weapon with existing actory or atermarket side mounteront & rear sling loops such as the Steyr AUG othe M-4. These slings are 1.25” wide, available inBlack, Olive Drab or Coyote Tan & and come withthe Emergency Release Buckle (ERB).

The ERB allows users to rapidly and ecientldisengage the slung weapon rom their body shouldthe sling become entangled with an obstacle oi an opponent should try to use the sling to thedisadvantage o an operator during a weaporetention situation.

Specter Gear 014 Universal, Black CQB SlingWith ERB: GGG-1103...$23.95

SPECTER GEAR SLINGSUniversal CQB Sling With ERB

“UNTIL THERE

IS NO ENEMY”

We use Only the Best Quality Hardwareand Hook-and-LoopFasteners

64

T A C T I C A L S L

I N G S

7/16/2019 Gg&g2012cat


SPECTER GEAR SLINGSUniversal SP Sling With ERB And

Armed Forces Deployment Sling Package

“UNTIL THERE

IS NO ENEMY”

When we designed the SOP sling our intent was toproduce the ultimate tactical patrol sling designincorporating every positive eature suggested tous by end users as well as addressing, and solvingevery negative issue relating to conventional 3 poinsling designs that we had identied.

Since it’s introduction into the marketplace, the SOPSling has been called the next evolutionary step in3 point tactical sling design. To begin with 1.5” wide webbing is used or the sling strap. The purpose o

the 1.5” width is to better distribute the weight othe weapon.

The next eature relates to how the sling attaches tothe weapon. We eel that a good sling design should work with the weapon, not against it. Conventiona3 point slings that are solidly attached to the sideo the weapon don’t hang well in anything but the“O Side Drop” carry mode and have a tendency tobind up and limit ecient movement o the weaponduring positional shooting. So, or the SOP Sling, we

chose fexible 1” attachment straps to be used aeach end o the sling to interace with the mountingadapter sling loops or sling swivels. The 1” strapsmove, shit and conorm within the sling loops toallow the SOP Sling to move more eciently withthe weapon thus enhancing ree movement o the weapon and allowing the weapon to hang in a morevertical orientation while being used in the MilitaryPatrol Ready mode.

Another eature is the ability or this sling to be

set up or let or right handed operators. All oour SOP mounting adapters (I applicable) are seup with right and let hand mounting points. Withthe attachment strap eature it’s a simple matter toattach the sling to the mounting adapters or use oneither side. So, there is no right or let hand speciversion necessary. The adapter strap eature alsoallows the user the fexibility to experiment withuser specic custom mounting solutions.

#139-ERB congurationshown. Universal Kit will tstandard rifes and shotguns.No adapters are provided.Fits weapons with existingside mounted sling loops.

Armed Forces DeploymentKit includes adapter webbingor Mil-Spec xed andcollapsible stocks

7/16/2019 Gg&g2012cat


“UNTIL THERE

IS NO ENEMY”

The eature that sets this sling apart rom any other is the Transition Release Buckle (TRB). The TRB allows the sling to be quickly andeciently extended to instantly create slack that allows or easy let/right shoulder transitions. This eature addresses a commoncomplaint associated with conventional 3 point tactical sling designs. With those types o slings it’s very dicult, i not impossible insome cases, to execute a cross shoulder transition. This will create a serious problem in an urban combat environment.

When the time comes to re-lock the TRB, it can be done so quickly, silently, and with just one hand needed, allowing the shooter tomaintain a constant ring grip on the weapon. The TRB can also be locked in wherever the shooter nds it comortable. This eatureallows or convenient expansion and contraction o the sling’s body loop as the operator’s mission prole changes and more, or lessload bearing equipment is worn.

Should you require the ability to completely release the sling rom your body, the Emergency Release Buckle (ERB) eatureis available on this sling as an optional eature. We’ve deliberately designed the sling to use two completely dierent buckledesigns or the TRB and ERB to avoid any conusion between the two eatures.

As with our other slings, our SOP Slings are manuactured with the highest quality materials and are stitched on heavy dutyindustrial machines using mil-spec #69 nylon thread. Realizing the needs o our end users we ensure strict quality controstandards and have over engineered these slings to deliver long term perormance under harsh conditions.

Unless otherwise specifed (Such as with the Universal Fit version), the SOP Sling you order will come equipped with appropriatemounting adapters or hardware to attach the sling to your weapon. You will not need to purchase any separate mounting hardware These slings are 1.5” wide, available in Black, Olive Drab or Coyote Tan and with, or without, an Emergency Release Buckle (ERB).

Please Note: The rear adapters or the CAR-15 / M-4 slings are designed to t standard Mil-Spec collapsible buttstocks.

#139 SP Universal Sling, Black With ERB. Package includes Universal SOP Sling with ERB or standard rife or shotgun length weapon. No adapters provided. Fits weapons with exist ing side mounted sling loops. GGG-1104...$30.95

#200 Armed Forces Deployment Package, Black. Package contains SOP sling and multiple ront and rear adapters to t alcurrently issued US Military individual combat arms including the M16-A2, M16-A4, GAU-5/A M4, M4A1 and Benelli M1014GGG-1107...$36.00

Same as #200 above but with the ERB option. GGG-1108...$40.95

SPECTER GEAR SLINGSUniversal SP Sling With ERB And

Armed Forces Deployment Sling Package

66

T A C T I C A L S L

I N G S

7/16/2019 Gg&g2012cat


The 580 MOUT Sling was designed with direct input rom US Military troops returning rom MOUT operations in Aghanistan and Iraq. Designedspecically or Military Operations on Urbanized Terrain (MOUT) this sling oers some serious advantages that are equally useul to law enorcementactical units, armed citizens and practical shooting competitors.

The 580 MOUT Sling excels in the urban dynamic entry role. Used on a weapon with a GG&G Receiver End Plate, the body loop secures the sling toa single mounting point. This arrangement allows the operator to simply arc the buttstock over the sling or an easily accomplished cross shouldertransition. Should a secondary weapon transition be required the weapon drops naturally to the oside, muzzle down, clearing a path to the sidearmand allowing an unobstructed secondary weapon transition.

The MOUT Sling eatures a 1” webbing tab that is cut extra long to allow or attachment to a wider variety o weapons. The webbing tab is attached tothe male portion o a 1.25” side release buckle. This assembly is intended to stay attached to the weapon at all times. The emale portion o the siderelease buckle is permanently attached to the sling itsel. With the male portion o the side release buckle attached to the weapon, and the emaleportion attached to the sling, the sling remains wrapped around the operator’s body when the release buckle is disengaged. This is the key eatureo this design. I it becomes necessary to unhook the weapon rom your body, such as when ring rom an unconventional shooting position outsideo the capabilities o the sling or something as simple, yet hazardous, as mounting/dismounting a vehicle, there isn’t 4 eet o webbing trailing romthe weapon. This allows the operator a much greater degree o versatility and saety

Another important benet o this design is the ability to wear the sling at all times, without necessarily having the weapon attached. This allowoperators to quickly and eciently lock the weapon onto the sling when deploying on alerts, without having to take any extra time to sling up andadjust. Just grab and go, and lock in when you have the time to do so.

This is also a very useul eature or competitive practical shooters. When coming onto, or o o, the ring line, the weapon can be quickly andsaely locked in, or disengaged without any wasted time or eort in adjusting the sling. Additionally, with spare buckle assemblies attached to severadierent weapons, you’re guaranteed to have consistent sling t with each weapon, since only one sling is involved.

The MOUT Sling is constructed rom the same 1” and 1.25” webbing that Specter uses with their CQB and SOP Slings. The MOUT Sling is anambidextrous design. These slings are available in Black, Olive Drab or Coyote.

Specter Gear 580 MUT Sling, Black: GGG-1109...$22.99Specter Gear 580 MUT Sling, D: GGG-1110...$22.99Specter Gear 580 MUT Sling, Coyote: GGG-1111...$22.99

“UNTIL THERE

IS NO ENEMY”

SPECTER GEAR SLINGS580 MUT Sling

7/16/2019 Gg&g2012cat


SPECTER GEAR SLINGS581 MUT SLING

“UNTIL THERE

IS NO ENEMY”

T A C T I C A L S L

I N G S

The Specter Gear 581 MOUT Sling was designed with direct input rom US Military troops returning rom MOUT operations iAghanistan and Iraq. Designed specically or Military Operations on Urbanized Terrain (MOUT) this sling oers some seriouadvantages that are equally useul to law enorcement tactical units, armed citizens and practical shooting competitors.

The MOUT Sling excels in the urban dynamic entry role. Used on a weapon with a GG&G Receiver End Plate, the body loop securethe sling to a single mounting point. This arrangement allows the operator to simply arc the buttstock over the sling or an easilaccomplished cross shoulder transition. Should a secondary weapon transition be required the weapon drops naturally to thoside, muzzle down, clearing a path to the sidearm and allowing an unobstructed secondary weapon transition.

The 581 MOUT Sling eatures a 1.25” webbing tab that utilizes a Specter Gear Steel Mash Hook Clip to allow or attachment to wider variety o weapons using a Quick Clip ormat. The Mash Hook Clip is attached to the male portion o a 1.25” side releasbuckle. The emale portion o the side release buckle is permanently attached to the sling itsel. With the male portion o theside release buckle; including the Mash Hook Clip, attached to the weapon and the emale portion attached to the sling, the slinremains wrapped around the operator’s body when the release buckle is disengaged. This is the key eature o this design. I ibecomes necessary to unhook the weapon rom your body, such as when ring rom an unconventional shooting position outsido the capabilities o the sling or something as simple, yet hazardous, as mounting/dismounting a vehicle, there isn’t 4 eet o webbing trailing rom the weapon. This allows the operator a much greater degree o versatility and saety.

Another important benet o this design is the ability to wear the sling at all times, without necessarily having the weaponattached. This allows operators to quickly and eciently lock the weapon onto the sling when deploying on alerts, without havinto take any extra time to sling up and adjust. Just grab and go, and lock in when you have the time to do so.

This is also a very useul eature or competitive practical shooters. When coming on to, or o o, the ring line, the weapon cabe quickly and saely locked in, or disengaged without any wasted time or eort in adjusting the sling. Additionally, with sparbuckle assemblies attached to several dierent weapons, you’re guaranteed to have consistent sling t with each weapon, sinconly one sling is involved.

The 581 MOUT Sling is constructed rom the same 1.25” webbing that Specter uses with their CQB and SOP Slings. The MOUT Sling ian ambidextrous design. Thereore, no let or right hand versions are required. These slings are available in Black and Coyote.

Specter 581 MUT Sling, Black: GGG-1119BLK....$23.99Specter 581 MUT Sling, Coyote: GGG-1119C....$23.99

7/16/2019 Gg&g2012cat


The Viper Sling unctions in the same way as the Specter MOUT Sling but with a couple o big dierences. First, the main portion o the webbing thasupports the weight o your weapon across your shoulder is 1.5” wide on the Viper Sling vs. 1.25” on the MOUT sling. This extra width really helpon heavier weapons such as ully equipped M-4’s.

The second big dierence is the addition o shock cording, housed in tubular webbing, on each end o the sling. This shock cord allows you to sling ua little tighter, yet easily cross shoulder transition. Not to mention the benets o shock absorption during aggressive movement.

The third dierence is the addition o a second emergency release buckle on the sling loop itsel. This gives you the option to disconnect rom the weapon and keep the sling on your body, or to disconnect the sling rom your body, or both i you’re so inclined.

As with the MOUT Sling, the Viper Sling in intended to be used on a weapon with a side receiver sling mount like many o the GG&G sling attachment The body loop secures the sling to a single mounting point. The Viper Sling eatures a side release buckle assembly that is intended to stay attachedto the weapon at all times. The emale portion o the side release buckle is permanently attached to the sling itsel. With the male portion o the siderelease buckle attached to the weapon, and the emale portion attached to the sling, the sling remains wrapped around the operator’s body when therelease buckle is disengaged. This is the key eature o this design. I it becomes necessary to unhook the weapon rom your body, such as when ringrom an unconventional shooting position outside o the capabilities o the sling or something as simple, yet hazardous, as mounting/dismounting avehicle, there isn’t 3 eet o webbing trailing rom the weapon. This allows the operator a much greater degree o versatility and saety.

Another important benet o this design is the ability to wear the sling at all times, without necessarily having the weapon attached. This allowoperators to quickly and eciently lock the weapon onto the sling when deploying on alerts, without having to take any extra time to sling upand adjust. Just grab and go, and lock in when you have the time to do so.

This is also a very useul eature or competitive practical shooters. When coming onto, or o o, the ring l ine, the weapon can be quickly andsaely locked in, or disengaged without any wasted time or eort in adjusting the sling. Additionally, with spare buckle assemblies attached toseveral dierent weapons, you’re guaranteed to have consistent sling t with each weapon, since only one sling is involved. The Viper Sling iconstructed rom the same 1.5” and 1.25” webbing that we use with our CQB, CST and SOP slings. The Viper Sling is an ambidextrous design Thereore, no let or r ight hand versions are required.

Specter Viper 584 Sling With Webbing Sling Attachment: GGG-1430...$35.95Specter Viper 585 Sling With MASH Hook Sling Attachment: GGG-1431...$37.95

SPECTER VIPER SLINGThe Viper 584 and 585 are

Both Available “UNTIL THERE

IS NO ENEMY”

Two Dierent Attachment Methods Available: MASHHook Attachment or Sling Webbing Attachment

MASH Hook Attachment

Sling Attached with WebbingAttachment Buckle

7/16/2019 Gg&g2012cat


T A C T I C A L S L

I N G S

Specter Gear oers two o their most popular slings in a snap hook or quick hook version. The #197 CQB Snap Hook Sling oers

all o the great eatures o the Universal CQB sling, but has the added eature o having snap hook sling attachments at each endo the sling. This aords the end user the fexibility to quickly attach and detach the sling as mission requirements dictate. Thesnap hooks easily attach to all models o the rugged GG&G Snap Hook Sling adapters.

In addition to making the CQB sling available in this conguration, Specter Gear is also making this conguration availablein the SOP version. Oten reerred to as the “Ultimate Patrol Sling”, the SOP now has one additional eature that increasesit’s overall fexibility.

#197 CQB Sling, Black, with snap hooks: GGG-1105...$28.95

#198 SP Sling, Black, with snap hooks: GGG-1106...$33.95

SPECTER GEAR SLINGSSnap Hook Slings Now Available

From Specter Gear

70

“UNTIL THERE

IS NO ENEMY”

7/16/2019 Gg&g2012cat


SH O

T G UNA

C CE S S

ORI E S

REMINGTN 870TACTICAL FLASHLIGHT MUNTA Rock Solid Flashlight Mounting Platform

The Remington 870 Forearm Flashlight Mount, another innovative GG&G tactical shotgun accessory is a unique shotgunfashlight mount that provides a rock solid, but tactically sound mounting system. The GG&G 870 Tactical Flashlight Mountkit includes a unique mounting bracket that securely attaches to the actory orend tube using the actory orearm retainingnut. The kit also includes a new actory Remington Police synthetic orearm precision cut to clear the 870 fashlight mountingbracket, a MIL-STD-1913 rail and an assembly tool. To install, simply remove the actory orearm rom the slide assemblyand install the new orearm, mounting bracket and MIL-STD-1913 rail. A fashlight mounting ring like the GG&G StandardFlashlight Ring or the G2 Flashlight Mounting Ring manuactured specically or the Surere G2 and G3 fashlight can beused to mount the fashlight, or the end user can opt to use a fashlight with an integral mount. As shown in the above photos,

the rail and fashlight are located at the three o’clock position, giving strong right shooters the tactical advantage at night. The let hand model places the light at the nine o’clock position.

The Remington 870 fashlight mounting bracket is precision machined rom rugged 4140 chrome moly steel and manganesephosphated matte black per mil-spec. The MIL-STD-1913 rail is CNC machined rom 6061 T6 aircrat grade billet aluminum alloyand Type III hard anodized matte black per mil-spec. As you can see, the 870 Forearm Flashlight Mount has been designed orthe rigors associated with proessional use.

IMPRTANT TIP: We suggest using an LED fashlight bulb to reduce the possibility o bulb ailure.

Remington 870 Tactical Flashlight Mount: GGG-1390...$89.00Remington 870 Tactical Flashlight Mount for Left Handed Shooters: GGG-1390L...$89.00

Tactical Flashlight MountAttaches to Slide Arm

Kit Includes a NewSynthetic Police Forearm

t

Your Flashlight Mounts at theConvenient 3 o’clock Position.

7/16/2019 Gg&g2012cat


MSSBERG 500/590TACTICAL FLASHLIGHT MUNT

Light Up The Intruder!

Mossberg 500 and 590 shooters have requested that we manuacture the same fashlight set up or them that we do or the 870so here it is--The Mossberg 500/590 Forearm Flashlight Mount, another terric shotgun accessory rom GG&G.

The GG&G 500/590 Flashlight Mount kit includes a unique mounting bracket that securely attaches to the actory orend tubeusing the actory orearm retaining nut. The kit also includes a new actory Mossberg Police synthetic orearm precision cut toclear the 500/590 fashlight mounting bracket, a MIL-STD-1913 rail and an assembly tool. To install, simply remove the actoryorearm rom the slide assembly and install the new orearm, mounting bracket and MIL-STD-1913 rail. A fashlight mountingring like the GG&G Standard Flashlight Ring or the G2 Flashlight Mounting Ring manuactured specically or the Surere G2 andG3 fashlight can be used to mount the fashlight, or the end user can opt to use a fashlight with an integral mount. As shown

in the above photos, the rail and fashlight are located at the three o’ clock position, giving strong right shooters the tacticaadvantage at night. The let hand model places the light at the nine o’clock position.

The Mossberg 500/590 fashlight mounting bracket is precision machined rom rugged 4140 chrome moly steel and manganesphosphated matte black per mil-spec. The MIL-STD-1913 rail is CNC machined rom 6061 T6 aircrat grade billet aluminum alloyand Type III hard anodized matte black per mil-spec. As you can see, the 500/590 Forearm Flashlight Mount has been designedor the rigors associated with proessional use.

IMPORTANT TIP: We suggest using an LED fashlight bulb to reduce the possibility o bulb ailure.

Mossberg 500/590 Tactical Flashlight Mount: GGG-1317...$99.95Mossberg 500/590 Tactical Flashlight Mount for Left Handed Shooters: GGG-1317L...$99.95

Tactical Flashlight MountAttaches to Slide Arm

Your Flashlight Mounts at theConvenient 3 o’clock Position.

Kit Included a NewSynthetic Police Forearm

t

72

S H O T

G U N A C C E S S O

R I E S

7/16/2019 Gg&g2012cat


The Remington 870 Jumbo Head Safety This is one o the latest additions to the GG&G line o Tactical Shotgun Accessories. With its enhanced eatures it beats the standard actory 870 saetyhands down. Gear Up With The Good Stu!

Remington 870 Safety Specications:

• The Remington Saety ts the Remington 870, 1100 and 1187 shotguns.

• Installs just like the actory 870 saety. No modication to the shotgun required.

• The shotgun saety has an oversized deactivation button allowing you to deactivate the saety without repositioning your re control hand.

• Unique non-slip machined suraces on both aces o saety aid in your ability to activate and deactivate the saety without your thumb ornger slipping o o the saety.

• The button on the activation side is longer than the standard 870 saety button. This allows you a quicker and more positive method oengaging the saety.

• High visibility orange indicator aids in seeing what position the saety is in.

• The Remington saety is manuactured rom ordnance steel or wear resistance and is manganese phosphated matte black per mil-spec

Remington Enhanced Safety: GGG-1436...$25.00

REMINGTN 870 ENHANCED SAFET870 Enhanced Safety Features a

Larger Button and High Visibility Indicator

Also Fits Remington 1100 and 1187 Shotguns

Oversize Button Allows Youto Deactivate the Saety

without Repositioning yourFire Control Hand

t t

Unique Non-Slip MachinedSuraces on Both Faces o SaetyAid in Activation and Deactivation

t

t

High Visibility IndicatorHelps you DetermineCondition o Shotgun

Saety is Longer than Factory Length,Allowing you to Easily Put the

Shotgun in a Sae Condition

7/16/2019 Gg&g2012cat


S H O T

G U N A C C E S S O

R I E S ENHANCED MAGAzINE FLLWER

FR REMINGTN ANDMSSBERG SHTGUNS

Fits the Remington 870, 1100 & 1187 Shotgunsand the Mossberg 590 & 930 Shotguns

Remington 870 & Mossberg 590 Shotgun Shooters know that the standard magazine ollowers leave much to be desired. Theyare unreliable and do not oer the necessary eatures tactical shooters are looking or. It is one o the rst shotgun componentto be upgraded. The GG&G Magazine Follower is an enhanced ollower manuactured with the tactical shooter in mind.

ENHANCED MAGAINE FOLLOWER SPECIFICATIONS:• The Enhanced Magazine Follower ts the Remington 870, 1100 and 1187 shotguns as well as the Mossberg 590

and 930 shotgun.

• The GG&G ollower installs just like the actory ollower. No modication to the shotgun is required.• The magazine ollower is manuactured rom stainless steel or corrosion and wear resistance. The stainless steel body

provides smooth operation and resists galling and contaminants imbedding into the body o the ollower. These are thetwo major contributors to atermarket ollowers malunctioning.

• The high visibility red insert is aluminum and is manuactured so that you cannot only quickly see that the magazine tube isempty, but in low light conditions, eel the dierence between the ace o the ollower and the rear o a shotgun shell.

• The ollower is manuactured with a deep spring pocket to better control spring movement.

Remington 870-1100-1187 Enhanced Magaine Follower: GGG-1437...$25.50Mossberg 590 Enhanced Magaine Follower: GGG-1439...$25.50Mossberg 930 Enhanced Magaine Follower: GGG-1440...$25.50

High VisibilityAluminum Insert

t

Stainless Steel Body not Only Provides SmoothOperation, but Eliminates Corrosion Issues.

The Stainless Body Resists Galling and ContaminantImbedding, the Two Major Contributors to Ater

Market Follower Malunctions

High Visibility Insert Gives You a QuickIndicator o Ammunition Status

Deep Spring Pocket in Stainless SteelBody Helps Control Spring Movement

7/16/2019 Gg&g2012cat


Remington Side Saddle Shell Holder:

• As easy to install as changing a car tire.

• No modications are required to the weapon or installation.

• Mounts solidly to receiver using provided steel trigger pin replacement bolts.

• Non marring backing plate will not damage the receivers nish.

• Backing plate is cut out to view weapons serial number.

• Holds six rounds o 12ga ammunition at a unique angle o 15 degrees to acilitate the speed o bottom loading the magazine tube or thetop loading o the chamber. Shotshells can be retained in base up or down position depending on shooters style o reloading.

• Durable, oil resist, replaceable shotshell retention system.

• Manuactured orm 6061 T-6 aluminum.

• Type III hard anodized black per mil-spec.

• Ergonomic design including lightning cuts or weight reduction. Weighs 5.5 oz.

• 6.5” overall length.

Remington Side Saddle Shell Holder: GGG-1525....$74.95

REMINGTN SIDE SADDLE SHELL HLDERFits Remington 870, 1100 and 1187

12 ga Tactical Shotguns

Shotshells can be Retained in Base Up or Base DownPosition Depending on the Shooters Reloading Style

7/16/2019 Gg&g2012cat


S H O T

G U N A C C E S S O

R I E S

The Remington 870 Front Sling Attachment: GG&G designed the ront sling attachment or the 870 shotgun to providethe shooter with a tactical advantage in adverse conditions. Current tactical applications or utilizing a sling on shoulder mountedcombat shotguns requires mounting the sling to the side o the 870 shotgun. This aids in satisying one o the critical actors in thiequation, the ability to make a smooth, rapid and sae transition to your sidearm. Its important to note that the 870 Front Sling

Attachment will t the Remington 1100 and 1187 shotguns, and is ambidextrous in all three applications.Additionally experience has demonstrated that the use o sling clamps that go around both the barrel and magazine extension tube o aghting shotgun will spread the barrel and tube by varying amounts, depending upon how much tension is applied to the clamps retainingscrew. As this is dicult to gauge, the gun’s zero will change every time the clamp is removed or maintenance and then reinstalled.

Many competing products are manuactured rom insubstantial stamped sheet metal and have rather sharp edges that not only can cuthe sling, but can also cut the shooter. Our Remington 870 Front Sling Mounts are machined in our acility rom AS-35 Geneva steel. Oexceptionally high quality, this amous Swiss steel eatures molecular structure with elongated grains or added toughness. The cornerhave been rounded and dehorned or the operator’s saety, bead blasted and then manganese phosphated matte black per mil-spec. Aball bearing detent on the Sling Attachment helps secure the unit behind the magazine tubes end cap. The Remington 870 Rear Sling Attachment: Because the Remington Rear Sling Attachment is mounted just behind the receiverit can be used in a dual point sling set up or as a single point sling attachment. Although originally designed or the Remington 870, i

will also t the Remington 1100 and 1187 shotguns.GG&G was one o the rst to introduce a Single Point Rear Sling Attachment or the Remington Model 870 combat shotgun. Precisionmachined rom 7075 aircrat grade billet aluminum alloy and Type III hard anodized matte black, this shotgun sling attachment hasbeen designed or the rigors associated with proessional use. This GG&G Single Point Rear Sling Attachment will accommodate slings upto 1 1/4” in width and can easily be installed by the operator. The Remington Rear Sling Attachment is available or let handed shootertoo. The “L” ater the part number signies the model or let handed Remington shotgun shooters.

PACKAGE DEAL: Save 10% on Remington 870/1100/1187 Front & Rear Sling Attachments: GGG-4353...$37.80Remington 870/1100/1187 Front & Rear Sling Attachments For Left Handed Shooters: GGG-4353L...$37.80

Remington 870/1100/1187 Front Sling Attachment: GGG-1084...$12.00Remington 870/1100/1187 Rear Sling Attachment: GGG-1129...$30.00Remington 870/1100/1187 Rear Sling Attachment For Left Handed Shooters: GGG-1129L...$30.00

REMINGTN 870 FRNT & REARRECTANGULAR SLING ATTACHMENTS

ur 870 Sling Attachments will Also Fit the

Remington 1100 & 1187 ShotgunsAll Edges are Rounded andFully De-Burred or theShooters Saety

t

Solid Sling Mounting Behind Receivercan be Used with Single Point or Dual

Point 1 1/4” Slings

t

76

REMINGTON 870REAR SLING ATTACHMENT

All Edges are Rounded andFully De-Burred or theShooters Saety

t

REMINGTON 870FRONT SLING ATTACHMENT

7/16/2019 Gg&g2012cat


REMINGTN 870 FRNT & REAR LPEDSLING ATTACHMENTS

Remington Sling Attachments are Designed for

HK Style Snap Hooks and Mash Hooks870 Sling Attachments will t Remington 1100 & 1187

Use o HK Style snap hooks or mash hooks on slings or shotguns such as the Remington 870, have become very popular in military, law enorcemenspecial operations circles and or shotguns used in home deense. Because o the lack o an alternative method, most shooters have just clipped theislings with snap hooks into a standard sling swivel. Although this “kinda” works, it is noisy and provides a loose and sloppy sling attachment.

The Remington 870 Looped Front Sling Attachment was developed to be used in combination with the GG&G Remington Looped Rear SlingAttachment in a conventional dual point sling setup to ll this specic need. It is an easy to install rugged alternative to clipping into the standardrectangular sling swivel or ront sling plate and is ambidextrous. The 870 Looped Front Sling Attachment is machined in our acility rom AS-35Geneva steel. This amous Swiss steel eatures molecular structure with elongated grains or added toughness. The corners have been rounded anddehorned or your saety. A ball bearing detent on the Sling Attachment helps secure the unit behind the magazine tubes end cap. It is nished in anon-refective manganese phosphate matte black per mil-spec.

The Remington 870 Looped Rear Sling Attachment can be used in conventional dual point sling setups as well as single point sling set ups The Remington Looped Rear Sling Attachment will also t the Remington 1100 and 1187 shotguns and is easy to install. It is precision machined rom7075 aircrat grade solid billet aluminum alloy and Type III hard anodized matte black per mil-spec. All edges have been de-horned and soteneor your saety and to protect your equipment.

The Remington 870 Ambidextrous Looped Rear Sling Attachment lls the requirement or an ambi-sling attachment and works greaor let handed shooters. The manuacturing specs are the same as the 870 Looped Rear Sling Attachment.

PACKAGE DEAL: Save 10% on Remington 870 Front & Rear Sling Attachments: GGG-1461...$37.80PACKAGE DEAL: Save 10% on Remington 870 Front & Rear Sling Attachments For Left Handed Shooters: GGG-1467...$37.80

Remington 870/1100/1187 Front Sling Attachment: GGG-1400...$12.00Remington 870/1100/1187 Rear Sling Attachment: GGG-1283...$30.00Remington 870/1100/1187 Ambi Rear Sling Attachment: GGG-1380...$30.00

All Edges areRounded and FullyDe-Burred or theShooters Saety

t

All Edges are Roundedand Fully De-Burred o

the Shooters Saety

t


t

Low Prole Front Sling Mount will Accommodate HK StyleSnap Hooks and Mash Hook

REMINGTON 870 LOOPED FRONT SLING ATTACHMENT REMINGTON 870 LOOPED REAR SLING ATTACHMENT REMINGTON 870 AMBI LOOPED REAR SLING ATTACHMEN

Low Prole Rear Sling Mount will Accommodate HK StyleSnap Hooks and Mash Hook

7/16/2019 Gg&g2012cat


The Mossberg 500 Front Sling Attachment: We havemanuactured a ront sling attachment or the Mossberg 500 or sometime, but our good riends at Specter Gear suggested a new design tha worked better and saved manuacturing costs, which in turn means alower price or you, our valued customer. Thanks Specter Gear!

The GG&G Mossberg 500 Front Sling Attachment easily installs byremoving the barrel and star washer, sliding the GG&G sling adapteon top o the barrel extension, reinstall the barrel and tighten theattachment screw through the new sling attachment. Besides providing

a sturdy mounting position, it aids in satisying one o the critical actorin a tactical equation, the ability to make a smooth, rapid and saetransition to your sidearm. It is designed to t most 500 models such athe Persuader, Cruiser, Combo, and model numbers 500a, and 88.

As with our other shotgun ront sling attachments, this one is ullyambidextrous. The GG&G Mossberg 500 Shotgun Front Sling Attachmenis machined rom AS-35 Geneva Steel and mag phosphated matte blackto mil-spec. All corners and edges have been rounded and dehorned othe operators saety.

The GG&G Mossberg 500 Rear Sling Attachment can be usedin conventional dual point sling set ups or in a single point sling set up This rear sling attachment will not only t the Mossberg 500 shotgunbut will also t the Mossberg 590 as well.

GG&G was one o the rst to introduce a Single Point Rear SlingAttachment or the Mossberg 500 combat shotgun. Precision machinedrom 7075 aircrat grade billet aluminum alloy and Type III hardanodized matte black, this shotgun sling attachment has been designedor the rigors associated with proessional use. The GG&G Single PoinRear Sling Attachment will accommodate slings up to 1 1/4” in width andcan easily be installed by the operator. This model is available or le

handed shooters. The “L” ater the part number signies the model olet handed shooters.

PACKAGE DEAL: Save 10% on Mossberg 500 Front & Rear SlingAttachments: GGG-1613...$37.80PACKAGE DEAL: Save 10% on Mossberg 500 Front & Rear SlingAttachments For Left Handed Shooters: GGG-1613L...$37.80

Mossberg 500 Front Sling Attachment: GGG-1223...$12.00Mossberg 500/590 Rear Sling Attachment: GGG-1132...$30.00Mossberg 500/590 Rear Sling Attachment For Left HandedShooters: GGG-1132L...$30.00

S H O T

G U N A C C E S S O

R I E S MSSBERG 500 FRNT & REAR

RECTANGULAR SLING ATTACHMENTSErgonomic Design is Fully Ambidextrous

Solid Sling Mount Large Enoughto Accommodate 1 1/4” Slings

t

MOSSBERG 500 FRONT SLING ATTACHMENT

MOSSBERG 500 REAR SLING ATTACHMENT

Large Enough toAccommodate 1 1/4” Slings

t

t All Edges are Rounded

and Fully De-Burred orthe Shooters Saety

All Edges are Roundedand Fully De-Burred orthe Shooters Saety

t

7/16/2019 Gg&g2012cat


MSSBERG 590 FRNT & REARRECTANGULAR SLING ATTACHMENTS

ur 590 Sling Attachements will Accommodate

Slings up to 1 1/4” Wide & the Rear SlingAttachment will Fit a Mossberg 500

The Mossberg 590 Front Sling Attachment is easy to install, isambidextrous and provides a stable and rugged ront mounting pointor your standard sling. Unlike some competing products that aremanuactured rom insubstantial stamped sheet metal and have rather

sharp edges that not only can cut the sling, but can cut you as well, theGG&G Shotgun Front Sling Attachment or the Mossberg 590 is machinedin our acility rom AS-35 Geneva steel. O exceptionally high quality, thisamous Swiss steel eatures molecular structure with elongated grains oradded toughness. The corners have been rounded and dehorned or yoursaety. The rectangular slot will accommodate slings up to 1 1/4” wide.A ball bearing detent on the Mossberg Sling Attachment helps securethe unit behind the magazine tubes end cap. Ater being de-horned it ismanganese phosphated matte black per mil-spec.

The GG&G Mossberg 590 Rear Sling Attachment can be used

in conventional dual point sling set ups or in a single point sling set up. This rear sling attachment will not only t the Mossberg 590 shotgun,but will also t the Mossberg 500 as well. GG&G was one o the rstto introduce a Single Point Rear Sling Attachment or the Mossberg590 combat shotgun. Precision machined rom 7075 aircrat gradebillet aluminum alloy and Type III hard anodized matte black, thisshotgun sling attachment has been designed or the rigors associated with proessional use.

The GG&G 590 Rear Sling Attachment will accommodate slings up to 11/4” in width and can easily be installed by the operator. This model

is available or let handed shooters, and the “L” ater the part numbersignies the let handed model.


Mossberg 590 Front Sling Attachment: GGG-1084-2...$12.00Mossberg 500/590 Rear Sling Attachment: GGG-1132...$30.00Mossberg 500/590 Rear Sling Attachment For Left HandedShooters: GGG-1132L...$30.00


Solid Sling Mount Large Enoughto Accommodate 1 1/4” Slings

All Edges are Roundedand Fully De-Burred orthe Shooters Saety

t


t



t


7/16/2019 Gg&g2012cat


S H O T

G U N A C C E S S O

R I E S MSSBERG 590 FRNT &

REAR LPED SLING ATTACHMENTSMossberg Sling Attachments are Designed for

HK Style Snap Hooks and Mash Hooks

Use o HK Style snap hooks or mash hooks on slings or shotguns such asthe Mossberg 590, have become very popular in military, law enorcemenspecial operations circles and or shotguns used in home deense. Becauseo the lack o an alternative method, most shooters have just clipped theislings with snap hooks into a standard sling swivel. Although this “kinda” works, it is noisy and provides a loose and sloppy sling attachment.

The Mossberg 590 Looped Front Sling Attachment was developedto be used in combination with the GG&G Mossberg Looped Rear SlingAttachment in a conventional dual point sling setup to ll this specicneed. It is an easy to install rugged alternative to clipping into the standardrectangular sling swivel or ront sling plate and is ambidextrous. The 590Looped Front Sling Attachment is machined in our acility rom AS-35 Genevasteel. This amous Swiss steel eatures molecular structure with elongatedgrains or added toughness. The corners have been rounded and dehornedor your saety. A ball bearing detent on the Sling Attachment helps securethe unit behind the magazine tubes end cap. It is nished in a non-refectivmanganese phosphate matte black per mil-spec. The Mossberg 590 Looped

Sling Attachment WILL NOT t the Mossberg 500 shotgun.

The Mossberg 590 Looped Rear Sling Attachment can be used inconventional dual point sling setups as well as single point sling set ups The Mossberg Looped Rear Sling Attachment will also t the Mossberg 500shotgun and is easy to install. It is precision machined rom 7075 aircragrade solid billet aluminum alloy and Type III hard anodized matte blackper mil-spec. All edges have been de-horned and sotened or your saetyand to protect your equipment.

The Mossberg 590 Ambidextrous Looped Rear Sling Attachment

lls the requirement or an ambi-sling attachment and works great or lehanded shooters. The manuacturing specs are the same as the Mossberg590 Looped Rear Sling Attachment.


Mossberg 590 Front Sling Attachment: GGG-1434...$12.00Mossberg 590 Rear Sling Attachment: GGG-1284...$30.00Mossberg 590 Ambi Rear Sling Attachment: GGG-1293...$30.00


t

MOSSBERG 590 LOOPED FRONT SLING ATTACHMENT

Low Prole Front Sling Mount will Accommodate HK Style

Snap Hooks and Mash Hooks

MOSSBERG 590 LOOPED REAR SLING ATTACHMENT

All Edges areRounded and FullyDe-Burred or the

Shooters Saety

t

t

t

Low Prole Rear Sling Mount will Accommodate HK Style


MOSSBERG 590 AMBI LOOPED REAR SLING ATTACHMENT

All Edges are Roundedand Fully De-Burredor the Shooters Saety

t

7/16/2019 Gg&g2012cat


The Mossberg 930 semi-auto shotgun has a strong ollowing and many930 shooters have asked us to “get with it” and manuacture a ront slingattachment and a rear attachment (installed right behind the receiver) orthis ormidable shotgun. We are proud to announce that we “got with it”and are now oering ambidextrous ront and rear sling mounts or theMossberg 930 shotgun.

The Mossberg 930 Front Sling Attachment is manuactured romAS-35 Geneva steel. O exceptionally high quality, this amous Swiss steeleatures molecular structure with elongated grains or added toughness. The rectangular design will accommodate 1 1/4” sling webbing. As anadded eature all corners and edges have been rounded and dehorned orthe operator’s saety. Ater being dehorned the sling mount is manganesephosphated matte black per mil-spec. A ball bearing detent on the FrontSling Attachment has a built in foating hardened steel ball that aides inkeeping the extended magazine tube rom backing o under recoil.

The Mossberg 930 Rear Sling Mountis designed to be used both

as a single point sling attachment or in a more traditional sling set up when used in conjunction with the ront sling mount. It will accommodate1 1/4” inch webbing and easily installs directly behind the receiver. Whenused as a single point set up, it allows the operator to mount the weaponon either the primary or oside shoulder. As a result, during dynamicentries it is easier to “cut the pie” at doorways and move around corners, whether they are on the right side or let side, without telegraphing theoperator’s position. In addition, slings attached to a single point mount work especially well when operators are deployed wearing body armor orare involved in breeching operations.

The GG&G Rear Sling Attachment has been designed and manuacturedto withstand the rigors associated with proessional use. It is precisionmachined rom 7075 aircrat grade billet aluminum alloy and Type IIIhard anodized matte black per mil-spec. All corners and edges have beenrounded and dehorned or the operator’s saety.

PACKAGE DEAL: Save 10% on Mossberg 930 Front & RearSling Attachments: GGG-1349...$37.80

Mossberg 930 Front Sling Attachment: GGG-1347...$12.00Mossberg 930 Rear Sling Attachment: GGG-1348...$30.00

MSSBERG 930 FRNT & REARRECTANGULAR SLING ATTACHMENTS

Both Front & Rear Sling Mounts are Ambidextrous

Check out our Front & Rear Package Price!



Solid Sling Mount Large Enoughto Accommodate 1 1/4” Slings t






t

7/16/2019 Gg&g2012cat


S H O T

G U N A C C E S S O

R I E S

The Mossberg 930 Looped Front Sling Attachment was developed to beused in combination with the GG&G Mossberg Looped Rear Sling Attachment ina conventional dual point sling setup.

Use o HK Style snap hooks or mash hooks on slings or shotguns such as theMossberg 930, have become very popular in military, law enorcement speciaoperations circles and or shotguns used in home deense. Because o the lacko an alternative method, most shooters have just clipped their slings with snap

hooks into a standard sling swivel. Although this “kinda” works, it is noisy andprovides a loose and sloppy sling attachment.

The Mossberg 930 Looped Front Sling Attachment is an easy to install ruggedalternative to clipping into the standard sling swivel or ront sling plate and iambidextrous. The 590 Front Sling Attachment is machined in our acility romAS-35 Geneva steel. O exceptionally high quality, this amous Swiss steel eaturemolecular structure with elongated grains or added toughness. The corners havebeen rounded and dehorned or the operator’s saety. Many competing productare manuactured rom insubstantial stamped sheet metal and have rather sharpedges that not only can cut you, but can cut your equipment, including your slingAs with all o our tactical products, this one has been designed or the rigors

associated with proessional use. A ball bearing detent on the Sling Attachmenhelps secure the unit behind the magazine tubes end cap. It is nished in a non-refective manganese phosphate matte black per mil-spec.

The Mossberg 930 Looped Rear Sling Attachment can be used inconventional dual point sling setups as well as single point sling set ups. Singlepoint slings using HK Style snap hooks or mash hooks attached to shotguns suchas the Mossberg 930, are very popular in military and law enorcement speciaoperations circles. Because o the lack o an alternative method, most shooters havejust clipped their single point sling with a snap hook into a standard sling swivelAlthough this works, it is noisy and provides a loose and sloppy sling attachment.

The Mossberg 930 Looped Rear Sling Attachment is the best alternative toclipping into the standard sling swivel or rear sling plate. Precision machinedrom 7075 aircrat grade solid billet aluminum alloy and Type III hard anodizedmatte black per mil-spec, it has been designed to withstand tough proessionause. All edges have been de-horned and sotened or your saety and to protecyour equipment. The Mossberg 590 Looped Rear Sling Attachment can easily binstalled by the operator.

PACKAGE DEAL: Save 10% on Mossberg 930 Front & Rear LoopedSling Attachments: GGG-1464...$37.80

Mossberg 930 Looped Front Sling Attachment: GGG-1427...$12.00Mossberg 930 Rear Sling Attachment: GGG-1426...$30.00

MOSSBERG 930 LOOPED FRONT SLING ATTACHMENT

MSSBERG 930 FRNT & REARLPED SLING ATTACHMENTS

Mossberg 930 Sling Attachments are Designed

for HK Style Snap Hooks and Mash Hooks

All Edges are Rounded andFully De-Burred or the

Shooters Saety

t


t

Low Prole Rear Sling Mount will Accommodate HK Style


t

Low Prole Front Sling Mount will Accommodate HK StyleSnap Hooks and Mash Hook

t

MOSSBERG 930 LOOPED REAR SLING ATTACHMENT

7/16/2019 Gg&g2012cat


The Benelli M4 shotgun is one o the hottest shotguns in tactical circles. However many tactical shotgun shooters including the United StateMarine Corp contacted us and commented that as good as the M4 is, American tactical shooters needed improved Benelli accessories such asa single point sling attachment located just behind the receiver that accepts HK Style snap hooks or mash hooks. Our Benelli M4 RectangularSling Attachment works great or standard slings that eed through the attachment, but not so well or slings with quick clips or mash hooks That’s why we developed our Benelli M4 Looped Sling Attachment. Fully ambidextrous, the sling attachment allows the operator to mount the weapon on either the primary or oside shoulder. Setting up the Benelli M4 sling attachment’s single point/receiver end plate in this mannemakes it easier to “cut the pie” at doorways and corners without telegraphing your position. In addition single point set ups that use HK stylesnap hooks or mash hooks are used a great deal by door breachers, so to ll this tactical gap, the GG&G team has done it again with the loopedambidextrous single point sling attachment or the Benelli M4 Tactical Shotgun.

Designed and manuactured or proessional use The Benelli M4 Looped Sling Attachment is machined rom 4140 ordnance steel and is manganesephosphated matte black per mil-spec. The low prole loop will accommodate almost all o the current hooks and clips. Installation does requirremoval o the rear stock. A special patent pending tool designed, developed and manuactured by GG&G is required or this procedure and iincluded in the package along with complete instructions. In eld tests, installation took between 15 and 22 minutes to complete.

Benelli M4 Rear Looped Sling Attachment: GGG-1460...$35.00

BENELLI M4 REAR LPEDSLING ATTACHMENT

Another Innovative Shotgun Accessory from GG&G


t

Low Prole Ambidextrous Design will Accommodate HK Style Snap

Hooks and Mash Hooks

t

7/16/2019 Gg&g2012cat


The Benelli M4 shotgun is one o the hottest shotguns in tactical circles. However many tactical shotgun shooters including the UnitedStates Marine Corp contacted us and commented that as good as the M4 is, Benelli ailed to understand the need o American tacticashooters----a single point sling attachment located just behind the receiver. To ll this tactical gap, the GG&G team has done it againand is now manuacturing an ambidextrous single point sling attachment or the Benelli M4 Tactical Shotgun.

Designed and manuactured or proessional use The Benelli M4 Sling Attachment is machined rom 4140 ordnance steel and imanganese phosphated matte black per mil-spec. The rectangular slot is ully deburred to decrease riction between the webbing andthe steel sling attachment. The low prole slot will accommodate sling webbing up to 1 1/4” wide. Installation does require removao the rear stock. A special patent pending tool designed, developed and manuactured by GG&G is required or this procedure and iincluded in the package along with complete instructions. In eld tests, installation took between 15 and 22 minutes to complete.

Benelli M4 Single Point Sling Attachment: GGG-1350...$35.00

BENELLI M4 SINGLE PINTSLING ATTACHMENT

t

All edges areRounded and Fully

De-Burred or theShooter’s Saety

SINGLE PINT SLING ATTACHMENTFor Benelli M1/M3 Super 90

Single point tactical slings attached to shoulder-mounted combat weapons–including shotguns such as the venerable Benelli Super 90 havebecome quite popular in both military and law enorcement special operations circles. These systems permit the operator to mount the weapon on either the primary or oside shoulder. As a result, during dynamic entries it becomes easier to “cut the pie” at doorways andmove around corners, whether they are on the right side or let side, without telegraphing the operators position. In addition, slings attacheto a single point mount work especially well when operators are deployed wearing body armor or are involved in breeching operationsPrecision machined rom rugged 7075 aircrat grade billet aluminum alloy and Type III hard coat anodized matte black, it has beendesigned to withstand the rigors associated with proessional use. This GG&G single point sling attachment will accommodate slings up to 11/4” in width and will also accept the excellent Chalker sling system. A dual point sling system can also be employed with this attachment.

Benelli M1/M3 Super 90 Single Point Sling Attachment: GGG-1139...$30.00

Benelli M1/M3 Super 90 Single Point Sling Attachment Left Hand: GGG-1139L...$30.00

t All Edges have beenDe-horned to Protect

the Operator S H O T

G U N A C C E S S O

R I E S

7/16/2019 Gg&g2012cat


During the high stress encountered in most tactical environments, it’s extremely dicult to locate by eel the small bolt release button ound on the

Benelli M1 Super 90, M2, M3 Super 90, Model 1014 and the M4 military shotgun. To improve tactile recognition, we developed an oversize tacticabolt release pad or these popular shotguns. Our large, knurled pad is manuactured rom 4140 ordnance steel, with a black manganese phosphatenish, and is coupled with a new modied Benelli bolt release mechanism. It’s both easy to locate by touch and manipulate, either with or withougloves. Complete instructions and all parts needed are included. Installation requires only basic tools and mechanical skills. This is an accessory thacould very well save your lie in a reght.

Benelli Tactical Bolt Release Pad: GGG-1030...$120.00

BENELLI TACTICAL BLT RELEASE PAD

BENELLI TACTICAL CHARGING HANDLEEnhances ChargingCharacteristics

The retracting bolt handle issued with the popular Benelli M1 Super 90, M2, M3 Super 90, Model 121, Model 1014 ghting and military shotguns idicult to grasp during the high anxiety associated with a gunght. Failure to retract the bolt handle completely could lead to a catastrophic malunctioo the potentially atal kind. To prevent this, our engineering sta has designed an oversized, knurled, rotating tactical charging handle or the Benelli lawenorcement series shotguns. Just remove the small actory retracting handle and replace it with our superior tactical unit. It’s manuactured rom 4140ordnance steel, heat-treated to Rockwell 45 C hardness and eatures a matte black, mil-spec manganese phosphate nish.

Benelli Tactical Charging Handle: GGG-1031...$25.00Benelli Tactical Charging Handle for M4: GGG-1032. ..$25.00

Heavy Knurling or EaseO Operation

t

Rounded EdgesProvide Snag FreeOperation

t

7/16/2019 Gg&g2012cat


RUGER MINI-14 RANCH RIFLESCPE MUNT

MIL-STD-1913 Rail Will Meet

The Rigors f Professional Use

86

The Mini-14 Ranch Rife has been in service or over 20 years, and is an excellent all around carbine. Over the past ten yearsour customers have ound it to be suitable or tactical applications and have repeatedly asked us to manuacture a scopemount or this terric carbine. We decided that this was a good time to introduce a high quality scope mount or the Ruge

Mini-14 Ranch Rife.

The mount is a MIL-STD-1913 dovetail rai l version that also oers a low prole mounting platorm or conventional red dooptics or powered scope and ring combinations.

The rail is 5.7 inches long to provide ample mounting space. The rail integrates with actory Ranch Rife integral mounts, analso has relie cuts beneath the rail or unimpeded cartridge ejection. The mount is precision machined rom rugged 6061 T6aluminum and Type III hard anodized matte black per mil-spec. Designed and manuactured to meet the rigors associate with proessional use.

Ruger Mini-14 MIL-STD-1913 Scope Mount: GGG-1382...$49.95

G G

& G M I N I - 1 4 A C C E S S O

R I E S

Meets MIL-STD-1913Specications

7/16/2019 Gg&g2012cat


The GG&G BATTLE HAWK Tactical Tomahawk is an extreme use combat tool. In act the original plant manuacturing designationcode was CUT (COMBAT UTILITY TOOL). As can be seen by the overall geometry and aggressive multiple cutting edge head

design, it is meant or aggressive use, very aggressive use. In addition to the head, the 3 inch Tanto shaped spike will denitelyget the job done. The double contour o the handle along with the ne weave G10KG Micarta scales, provide a positive and solidlong and short grip or the user.

We chose Crucible S7 tool steel or the BATTLE HAWK because it’s shock resistant, high impact resistant and withstands chippingand breaking. The material is heat treated and hardened to Rc 56-58. It is meant to hold up to tough treatment. We powder coatthe BATTLE HAWK in our colors: Matte Black, Matte OD Green, Matte Desert Tan, and Matte Combat Gray. The Kydex sheath with Tek-Loc astener is included and is only oered in black.

The new 38 minute training DVD created by the proessionals at The Warrior School is now included at no extra charge with yourpurchase o the Battle Hawk. This dynamic DVD includes straight orward combative techniques as well as crisis eld demonstra-tions specic to the Battle Hawk including vehicle extractions and breaking through a cinder block wall. Close quarter combat

experts Jerey Prather and Darin Ashley lead you step-by-step through over 80 lethal and non-lethal combat techniques withyour Battle Hawk including ghting techniques against knie and bayonet attacks and sentry interdiction.

BATTLE HAWK SPECIFICATIONS:

THE BATTLE HAWK

Blade Material: Crucible S7Material Thickness: .400”Hardness: Rc 56-58Overall Length: 13.25”

Handle Length: 10.5”Head Length: 8.25”Spike Length: 3”Overall Weight: 44 ounces

Scales: 3/16” thick G10KG MicartaFinish: powder coatSheath: Kydex with Tek-Loc astener

BATTLE HAWK Matte Black: GGG-1280BLK...$259.95

BATTLE HAWK Combat Gray: GGG-1280Gray.. .$259.95

BATTLE HAWK D Green: GGG-1280D...$259.95

BATTLE HAWK Desert Tan: GGG-1280Tan.. .$259.95

t Multiple CuttingEdges

The New 38 minute Battle Hawk Training DVD is Now Included withYour Purchase o the Battle Hawk.

Multiple CuttingEdges

t t

t

tDoubleContour Grip

tKydex Sheath

Included

ED GEDWEA

P ON S

7/16/2019 Gg&g2012cat


The PENATRATOR is another in a series o covert deense tools designed and manuactured by GG&G. It is designed to provide acovert tire or container defator and deensive weapon that can be used in unoreseen emergency situations. In the passive mode, itlooks like a large pen but by removing the pen cap a very sharp point is exposed that will aid in dealing with an unexpected threat. Two models are available, one with a 2.6” hollow carbon ber shat and one with a 2.6” hollow titanium shat. Both are extremelyrugged, corrosive resistant and lightweight. The hollow shats provide an eective route to let what’s inside—outside! The handleon both models is manuactured rom Delrin and is grooved so as to provide a positive grip in the most demanding situations. Thetip is protected by a standard pen cap which serves to protect the user, when in the passive mode.

Weighing in at only .5 -.75 ounces, the PENATRATOR is an outstanding addition to ones deensive arsenal, especially where stealthis imperative.

SPECIFICATINS-CARBN FIBER/TITANIUM:

The PENATRATR, Carbon Fiber: GGG-1456...$42.00The PENATRATR, Titanium: GGG-1457...$42.00

Overall Weight: .5 oz/.75 ozHandle Material: DelrinShat Length: 2.6”

Handle Diameter: .500”Shat Material: Carbon Fiber/TitaniumHandle Finish: Matte Black

Shat Diameter: .322”/.315Overall Length With Cap 7.5Shat Finish: Bead blasted

THE PENATRATRDiscreet Defense Too

Easy Entry Bevel Tip

Discreet Pen Cap

Anti-Slip Grip

E D G E

D W E A P O N S

7/16/2019 Gg&g2012cat


Even though the trend has been towards rife scopes with 30mm tubes, there are still a lot o high quality rife scopes with oneinch tubes in the marketplace. We have recently been getting a signicant number o calls or a non-marring, 30mm to 1 inchscope ring reducer to t 5/8 inch wide sniper grade 30mm scope rings, like the ones oered by GG&G separately or as integralring bases. To meet our customers requests, we decided to oer a 1 inch reducer to our customers manuactured rom solid Delrin.Nothing ancy, just a rugged, non-marring, quality machined 1 inch ring insert that not only ts tight to your 1 inch scope, butis competitively priced . As can be seen in the above images, the one inch insert has a recoil fange on one side that keeps thereducer in the correct position during installation and recoil.

30mm To 1 Inch Delrin Scope Ring Reducer: GGG-1392...$15.00

30MM T 1 INCHDELRIN SCPE RING REDUCER

Easy to UseNon-MarringNon-Slip

S C OPERI N G S

t Flange KeepsReducer in Place

7/16/2019 Gg&g2012cat


S

C O P E R

I N G S 30MM SNIPER GRADE SCPE RINGS

A set o our Aluminum Sniper-Grade Scope Rings weighs only 4.8 ounces. The ring bodies are manuactured rom one piece oexceptionally strong 7075 T6 billet aluminum alloy, which is the very same aluminum alloy used to manuacture Colt AR-15/M16receivers, as well as many o their clones. Great attention has been placed upon the design. The sidebar is signicantly thicker thanmost to permit high-torque tightening without the associated problem o sidebar fex. The ring cap is held in place by our sockethead steel cap screws. These thread into stainless steel “Helicoil” inserts to prevent stripping the threads. The GG&G AluminumSniper-Grade Scope Rings are 0.625-inch in width and are high enough to accommodate a scope with a 56mm objective lens. Thering height rom top o dovetail to center line o ring is 1.140”. They are Type III hard anodized matte black per mil-spec. Thesquare-cut cross bolt and its locking nut are manuactured rom 4140 chrome moly steel. Light and yet incredibly rugged, theyset a new standard in proessional scope rings or law enorcement, military and civilian use.

30mm Aluminum Sniper Grade Scope Rings: GGG-1067...$99.50

1/2” Locking Nut t

Four Top

Strap Screwst

30MM ALUMINUMSNIPER GRADE SCPE RINGS

Our 30mm Sniper Grade Scope Rings are not only more ergonomic, but are lighter as well. Each ring only weighs our ouncesNot bad or a ring manuactured rom solid billet 4140 steel. Prior to being manganese phosphate treated with a matte blaccombat nish, all components o the ring are careully de-burred so as to eliminate any sharp edges. The square recoil cross lu

will insure a positive engagement with the mounting rail. Four steel cap screws attach the top portion o the ring to the ring base These rings are tall enough to accommodate a scope with a 56mm objective lens and Butler Creek lens covers on a Remingto700 with a heavy contour barrel. The ring height rom top o dovetail to center line o ring is 1.115”.

30mm Sniper Grade Scope Rings: GGG-1020...$159.95

Four TopStrap Screwst

1/2” Locking Nut t

Square Recoil Lug

t

Square Recoil Lug

t

90

7/16/2019 Gg&g2012cat


The New B-COMP 30mm was developed to ll two needs expressed to us by long range tactical shooters. First, although positioned or a long rangengagement, the shooter may encounter short range targets requiring lie saving ast action. Secondly, long range optics with eatures that requirebatteries are becoming more common. Because these batteries are small and thin it is somewhat dicult to keep track o them in a pack or supporkit. “Give us a way to keep them close to the optic”.

The innovative GG&G design team designed a method to do both in one compact package. The B-COMP 30mm Ring System provides a light weight scopring that includes a removable and ambidextrous mounting platorm or the light weight mini red dot sights like the JPoint, the Doctor Sight and the Trijicon RedDot. Mounted at 45 degrees to the elevation turret, the platorm allows the mini red dot to be positioned in such a way that the shooter needonly to slightly roll the rife to acquire a close range target. The B-COMP Ring System also includes a removable water tight battery compartment. Theunique design will accommodate one o each; (1) 2032 waer battery commonly used in lit reticle scopes, and (1)1/3N battery, used in the mini red do

optics. It is mounted out o the way and close to the receiver. To accommodate shooter preerences and scope ergonomics, the B-COMP 30mm Ring can bemounted behind or orward o the turrets. All components are manuactured rom 6061-T6 aluminum alloy and Type IIII hard anodized matte black pemil-spec. As with all GG&G tactical accessories, the parts have been dehorned or the shooters saety. To provide the ultimate in fexibility to the customerthe B-COMP 30mm Ring can be purchased in a kit with both the mini red dot optic platorm and waterproo compartment included, the ring with justthe mini red dot optic platorm, or the ring with just the battery compartment. The platorm and waterproo battery compartment can also be purchasedseparately and include the mounting hardware.

The Complete B-CMP 30mm Ring System: GGG-1326...$89.95The B-CMP 30mm Ring With Mini Red Dot Mounting Platform: GGG-1327...$54.95The B-CMP 30mm Ring With Waterproof Battery Compartment: GGG-1328...$76.95Waterproof Battery Compartment nly: GGG-1329...$42.00Mini Red Dot Mounting Platform nly: GGG-1330...$18.95

THE B-CMP 30MM RINGProvides A Spare Battery Compartment

And ptic Platform For our Long Range Scope

t

WaterprooBattery

Compartment

9

Optic MountingPlatorm t

t Optic MountingPlatorm

7/16/2019 Gg&g2012cat


STANDARD XDS SWIVEL BIPDFULL ADJUSTABLEIncludes a Full 25 Degrees f Swivel Cant andTool-Less Installation Selected By the

US Army Soldiers Weapons ProgramNSN: 1005-01-563-0152

Standard XDS Swivel Bipod: GGG-1125...$172.00

The ollowing adapters are available or the Standard XDS Swivel Bipod:XDS PSS Adapter: GGG-1246...$29.95XDS T-Slot Adapter: GGG-1242...$29.95

The GG&G Standard XDS Swivel Bipod oers a greater range than previous versions. In addition to a stronger pivot mechanismthe olding AR-15 bipod design aords 25 degrees o cant in either direction o center. Not only does this increase better roughterrain adjustability, but this pivoting capability allows the deployed bipod leg to be used as a vertical oregrip i required orapid transition. In addition, a tension mechanism and adjustment knob has been added so that the operator does not need toolsto make tension adjustments to the swivel. The Standard XDS Swivel Bipod or the AR-15 and M16 is specically designed and manuactured to meet current militaryrequirements. It is exceptionally rugged, and will not only withstand extreme environmental conditions rom -55 degrees Fahrenheito +155 degrees Fahrenheit, but be operational under those conditions. With the bipod legs deployed it will withstand the military’sthree oot drop test onto a concrete foor while mounted to an AR-15/M16 or M4 carbine and maintain ull battle capability. Manuactured rom aircrat grade 6061 T6 aluminum alloy with extreme duty connection points and asteners, this quick detach

swiveling bipod is still remarkably lightweight at only 11.5 oz. Features include a 7” to 9.5” height adjustment when measured rom the dovetail attachment, silent deployment, ully adjustablelegs with thumbnut adjustments and grip tight oot pads. All o the XDS bipod’s aluminum parts are bead blasted and Type IIIhard coat anodized per mil-spec in a non- refective matte black combat nish. The quick-release bipod is equipped with a MILSTD-1913 rail adapter that does not require tools or installation. GG&G’s XDS bipod will also attach to any rife with a 6 o’clockunder barrel MIL-STD-1913 or Weaver type rail.

25o of Cant in Either Direction of Center

T A C T I C A L B I

P O D S

Legs Extend From 7” to 9.5”

7/16/2019 Gg&g2012cat


QUICK DETACH STANDARD XDS BIPOD:

• The QD Bipod eatures 25 degrees o cant in either direction or rough terrain adjustability.

• The Quick Detach XDS Bipod height adjusts rom 7” to 9.25” when measured rom the bottom o the dovetail to the bottom o the oot pads.

• Silent deployment, ully adjustable legs with thumb nut adjustments.

• Grip tight oot pads.

• Deployed leg can be used as vertical grip.

• Tool–less swivel tension adjustment.

• All connection points are designed and manuactured or extreme duty.

• Manuactured to meet current military requirements or extreme weather and drop tests.• All aluminum components are manuactured rom 6061 T-6 aluminum.

• Accu-Force QD System provides ergonomic QD lever system or quick and rock solid on-o transitions.

• Accu-Force QD Mechanism is ully adjustable to t worn or our o spec dovetails.

• All steel components are manuactured rom 4130 steel.

• All aluminum components are Type III hard anodized matte black per mil-spec.

• All steel components are manganese phosphate matte black per mil-spec.

• Weighs in at 13 ounces. Quick Detach Standard XDS Bipod: GGG-1407...$199.95

QUICK DETACH STANDARD XDS BIPDA Tactical Bipod that ffers QD Flexibility

with Rock Solid Dependability

Accu-Force QD System Provides QuickOn-O Capability


25o of Cant inEither Direction

of Center

7/16/2019 Gg&g2012cat


HEAV DUT XDS SWIVEL BIPDFULL ADJUSTABLEIncludes A Full 25 Degrees

f Swivel Cant AndTool-Less Installation

Heavy Duty XDS Swivel Bipod: GGG-1245...$202.00XDS PSS Adapter: GGG-1246...$29.95XDS T-Slot Adapter: GGG-1242...$29.95

XDS M1A/M14 Adapter: GGG-1243...$29.95XDS AR-30/AR-50 Adapter: GGG-1244...$29.95

The GG&G Heavy Duty XDS Bipod with swiveling capability now oers a greater range than previous versions. In addition to a mucstronger pivot mechanism, the design aords 25 degrees o cant in either direction o center. Not only does this increase better roughterrain adjustability, but this pivoting capability allows the deployed bipod leg to be used as a vertical oregrip i required or rapidtransition. In addition, a tension mechanism and adjustment knob has been added so that the operator does not need tools to maketension adjustments to the swivel.

The GG&G Heavy Duty XDS Tactical Bipod is specically designed and manuactured to meet current mili tary requirementsIt is exceptionally rugged, and will not only withstand extreme environmental conditions rom –55 degrees Fahrenheit to+155 degrees Fahrenheit, but be operational under those conditions.

Manuactured rom aircrat grade 6061 T6 aluminum alloy with extreme duty connection points and asteners, this swivelingbipod is still remarkably lightweight at only 17 oz.

Features include a 8” to 10.5” height adjustment when measured rom the dovetail attachment, silent deployment, ullyadjustable legs with thumbnut adjustments, and grip tight oot pads. All aluminum parts are bead blasted and Type III hardcoat anodized per mil-spec in a non refective matte black combat nish. The bipod is equipped with a MIL-STD-1913 raiadapter that does not require tools or installation. The heavy duty bipod will also attach to any rife with a 6 o’clock undebarrel MIL-STD-1913 or Weaver type rail.

The ollowing adapters are available or the Heavy Duty XDS Swivel Bipod: T-Slot Adapter, PSS adapter, AR30/AR50 Adapteand M14/M1A Adapter.

T A C T I C A L B I

P O D S


of Center

94

7/16/2019 Gg&g2012cat


QUICK DETACHHEAV DUT XDS BIPD

Quick Detach Bipod Flexibility-Fully Adjustable 25 Degrees ofCant and Tool-Less Installation

The GG&G Quick Detach Heavy Duty XDS Bipod with the ability to cant oers a greater range than previous versions. In addition to a much strongepivot mechanism, the design aords 25 degrees o cant in either direction o center. Not only does this increase better rough terrain adjustability, but thipivoting capability allows the deployed bipod leg to be used as a vertical oregrip i required or rapid transition.

QUICK DETACH HEAVY DUTY XDS BIPOD SPECIFICATIONS:

• The QD Heavy Duty XDS Bipod eatures 25 degrees o cant in either direction or rough terrain adjustability.• The QD Heavy Duty XDS Bipod height adjusts rom 8” to 10.5” when measured rom the bottom o the dovetail to the bottom o the oot pads.• Silent deployment, ully adjustable legs with thumb nut adjustments.• Grip tight oot pads.• Deployed leg can be used as vertical grip.

• Tool–less swivel tension adjustment.• All connection points are designed and manuactured or extreme duty.• Manuactured to meet current military requirements or extreme weather and drop tests.• All aluminum components are manuactured rom 6061 T-6 aluminum.• Accu-Force QD System provides ergonomic QD lever system or quick and rock solid on-o transitions.• Accu-Force QD Mechanism is ully adjustable to t worn or our o spec dovetails.• All steel components are manuactured rom 4130 steel.• All aluminum components are Type III hard anodized matte black per mil-spec.• All steel components are manganese phosphate matte black per mil-spec.• Weighs in at 18.5 ounces. Quick Detach Heavy Duty XDS Bipod: GGG-1409...$229.95

Accu-Force QD System Provides QuickOn-O Capability



of Center

7/16/2019 Gg&g2012cat


BIPD ADAPTERS FR STANDARDAND HEAV DUT BIPDS

Adapters are oten necessary to attach a bipod to your avorite carbine or rife. GG&G manuactures our Bipod Adapter Rai

or light and heavy caliber applications.

Precision machined rom 6061 T6 billet aluminum and Type III hard anodized matte black to meet mil-spec, all are built tmeet the high standards o serious proessional end users. The miscellaneous mounting hardware and pins i required ospecic applications, are manuactured rom steel and coated as needed.

GG&G T-Slot Bipod Adapter: GGG-1242 ...$29.95

GG&G PSS Bipod Adapter: GGG-1246...29.95

GG&G M14/M1A Bipod Adapter: GGG1243...29.95

GG&G AR30/AR50 Bipod Adapter: GGG1244...29.95

PSS Adapter

M14/M1A Adapter

T-Slot Adapter

AR30/AR50 Adapter

96

T A C T I C A L B I

P O D S

7/16/2019 Gg&g2012cat


The Harris Bipod is probably the most popular budget pr iced bipod in the market today. Unortunately i t does not easily attach to Weaver o

MIL-STD-1913 dovetails. We manuacture this inexpensive, extremely rugged low prole Harris Bipod Adapter to ll this important requirementFeatures o the GG&G Harris Bipod Adapter include a counter sunk locking cross bolt that helps eliminate the possibility o snags. The clampingside bar is recessed into the overall body o the adapter to provide a smooth overall appearance, and solid clamping engagement, even onundersize or worn dovetails. Most importantly, the GG&G Harris Bipod Adapter makes ull surace contact with the Harris bipod interace whichassures a tight t. The GG&G Harris Bipod Adapter utilizes a standard swivel stud interace that is locked in a stationary position.

Our Harris Bipod Adapter is manuactured rom solid billet 6061 T6 aluminum and Type III hard anodized in a matte black non-refective combanish to meet mil-spec. All steel parts are manganese phosphated matte black per mil-spec.

Harris Bipod Adapter: GGG-1388...$24.95

HARRIS BIPD ADAPTERSolid Billet—Solid Mounting

Counter Sunk Cross Bolt

And Recessed Side Bar Make This Bipod Adapter Super Ergonomic

Utilizes the Standard Bipod Stud

7/16/2019 Gg&g2012cat


T A C T I C A L B I

P O D S

98

I you have a requirement to quickly remove your Harris Bipod rom your weapon, our Quick Detach Harris Bipod Adapter wimeet that requirement. It provides you with the tactical fexibility to operate with our without your bipod, and to do so with jusa throw o the Accu-Force Lever on our QD Harris Bipod Adapter.

GG&G QUICK DETACH HARRIS BIPOD ADAPTER:

• Overall design provides smooth integrated appearance and solid clamping engagement.

• QD Bipod interace surace makes ull contact with Harris Bipod or a tight and solid t.

• The Quick Detach Harris Bipod Adapter uses a standard swivel (stud) interace that is locked in a stationary position.

• Ergonomic QD lever and lever mechanism provides quick & easy on-o transition.

• The Accu-Force QD System is ully adjustable or worn or out o spec dovetails.

• The body is manuactured rom billet 6061 T-6 aluminum.

• The Accu-Force Quick Detach mechanism is manuactured rom 4130 steel.

• All aluminum parts are Type III hard anodized matte black per mil-spec.

• All steel parts are manganese phosphated matte black per mil-spec.

• Weighs 3.25 ozs. Quick Detach Harris Bipod Adapter: GGG-1406...$73.00

QUICK DETACHHARRIS BIPD ADAPTER

Accu-Force QD System

Provides Rock Solid Mounting

Accu-Force Quick Detach System FullyAdjusts or Worn or Out o Spec Dovetails

CNC Machined Bipod Interace SuraceMakes Full Contact with Harris Bipod

7/16/2019 Gg&g2012cat


G G &

GF UN

ST UFFWe are in the serious business o creating high quality tactical accessories or proessional use, but we think it is important to

have some un, so our new products team thought it would be great to bring this unique Claymore Mine Trailer Hitch Cover tothe market place.

We know it will get a second look rom the tailgaters in your community, but what the heck, you only go around one time. OurReplica Claymore Mine Hitch Cover was molded rom the real deal. It is virtually the same size as the original. It measures 5 1/4inches tall by 8 inches wide by 1/1/4 inches thick and is manuactured rom solid polypropylene with UV additives or durabilityand color astness. The hitch adapter ts 2” standard receivers. The connectors and internal space are solid so there is no chancethat it can be conused as a real Claymore Mine. We do however strongly advise that you install a hitch pin lock or it may justdisappear. For an additional $10.00 you can really stand out with yellow lettering. Although the paint is very durable, please donot use the power washer at the car wash on it. Go Ahead Have Some Fun, But Read The Important Legal Disclosure Below !!!

IMPRTANT NTICE: This product is prohibited in some states including but not limited to the following ones:Colorado--This item is prohibited under Colorado 18-12-109, Paragraph 7.Florida--This item is prohibited under Florida Statute 790.165Connecticut: Statutes indicate that this item may be prohibited.New Hampshire: Statutes indicate that this item may be prohibited.

ATTENTIN-PLEASE READ CAREFULL PRIR T RDERING:State, county and municipal laws pertaining to items such as the Replica Claymore Mine Hitch Cover are varied. This product isprohibited in certain states. The purchaser and end user are responsible or knowing exactly what the local laws are concerningpurchasing or displaying this product and or abiding by those laws. It is your responsibility beore purchasing this product toknow the local laws.

Thereore GG&G Inc. does not warrant that a person may legally purchase, and or display the Claymore Mine Hitch Cover in theirarea. A person placing an order or using this product warrants that he or she is an adult and is under no legal restrictions which would prohibit such person rom ordering, owning, displaying, possessing or transerring this product under applicable ederal,state, or local law.

Replica Claymore Mine Hitch Cover: GGG-1387...$39.95Replica Claymore Mine Hitch Cover With ellow Lettering: GGG-1387...$49.95

CLAMRE MINE TRAILER HITCH CVERf Course It’s a Replica, But “Ain’t it Cool”

9

Have Some Fun!!! Be the

First in your Neighborhoodto Have a Replica Claymore Mine Hitch Cover

Will Fit Standard 2 Inch Receivers

Available with Yellow Lettering

Overall Dimensions:8 1/4” Wide x 5 1/4” High

1 1/4” thick

The Claymore Mine Hitch Coveris manuactured rom solid

polypropylene material

7/16/2019 Gg&g2012cat


G G & G

F U N S

T U F F

100

CLAMRE MINE DESK ACCESSRf Course it’s a Replica, but it was Molded from

the Real Thing and it’s Sure to get Attention!!!

Ever since we introduced the Replica Claymore Mine Hitch Cover we have had requests or a Claymore Mine replica or youdesk, bookcase or workbench. You asked or it, and here it is. The Claymore Mine Desk Accessory is molded rom the real dealbut instead o spikes to hold it erect, it has a small steel easel support in the back, so that it will remain upright on your deskbookcase or den replace mantle. It measures approximately 5-1/4 inches tall by 8 inches wide by 1-1/4 inches thick and ismanuactured rom solid polypropylene with UV additives or durability and color astness. For an additional $10.00 you canreally get attention with yellow lettering.

The Claymore Mine Desk Accessory is perect to have on the conerence room table during those nasty settlement negotiations. GoAhead Have Some Fun, But Read The Important Legal Disclosure Below!!!

IMPRTANT NTICE: This product is prohibited in some states including but not limited to the following ones:Colorado--This item is prohibited under Colorado 18-12-109, Paragraph 7.Florida--This item is prohibited under Florida Statute 790.165Connecticut: Statutes indicate that this item may be prohibited.New Hampshire: Statutes indicate that this item may be prohibited.

ATTENTIN-PLEASE READ CAREFULL PRIR T RDERING:State, county and municipal laws pertaining to items such as the Replica Claymore Mine Desk Accessory are varied. See the abovenotice. The purchaser is responsible or knowing exactly what your local laws are concerning purchasing or displaying one and oabiding by those laws. It is your responsibility beore purchasing this product to know the local laws.

Thereore GG&G Inc. does not warrant that a person may legally purchase, and or display the Claymore Mine Hitch Cover in their areaA person placing an order or using this product warrants that he or she is an adult and is under no legal restrictions which would prohibisuch person rom ordering, owning, displaying, possessing or transerring this product under applicable ederal, state, or local law.

Replica Claymore Mine Desk Accessory: GGG-1273...$27.00Replica Claymore Mine Desk Accessory With ellow Lettering: GGG-1273...$37.00

You asked for onefor Your Desk or Bookshelf, andHere it is!

It Will Stand Erect on Your Desk,

Conference RoomTable, Bookshelf or Mantle

The Claymore Desk Accessoryis Manuactured rom SolidPolypropylene Material

Overall Dimensions:8 1/4” Wide x 5 1/4” High1 1/4” Thick

100

Available with Yellow Lettering

7/16/2019 Gg&g2012cat


Our New Products Team is always looking or innovative ways to oer our customers not only great tactical accessories but some un stu likour Claymore Mine Hitch Cover. The latest creation to peg their un meter is the 40mm Grenade Salt & Pepper Shakers. They are manuacturerom solid billet 6061 T-6 aluminum and anodized in the colors shown in the above images. They are manuactured to closely replicate thedimensions o the original 40mm grenade. The tip o the projectiles are engraved with an “S” and “P” to easily identiy the contents. Theprojectiles unscrew or easy lling.

A terric addition to your arsenal o “Fun Stu”!

Although the nish is rugged, to preserve the luminescence and overall great appearance, we recommend that they be hand washed with mildetergent when they need cleaning.

40mm Salt & Pepper Shakers, Gold Projectile: GGG-1315...$45.00

40mm Salt & Pepper Shakers, Silver Projectile: GGG-1316...$45.00

40mm Salt & Pepper Shakers, Gold & Silver Projectile: GGG-1318...$45.00

3-Piece Set With 40mm Salt & Pepper Shakers and Toothpick Holder, Gold Projectile: GGG-1337...$60.50

3-Piece Set With 40mm Salt & Pepper Shakers and Toothpick Holder, Silver Projectile: GGG-1338...$60.50

40mm Toothpick Holder, Gold Projectile: GGG-1324...$22.50

40mm Toothpick Holder, Silver Projectile: GGG-1325...$22.50

40MM GRENADESALT & PEPPER SHAKERS

Liven Up our Dinner Table!!!

These are Manufacturedto Closely Resemble the“Real Thing”

Available in Two Color Schemes. Gold (HE) projectile or Silver ProjectileProjectiles Unscrew From Base or Easy Filling

Overall Dimensions:

1 5/8” diameter4” tall

3-Piece Set IncludesToothpick Holder

7/16/2019 Gg&g2012cat


Specications for ITT NE PVS-14/17 PINNACLE Night Vision Monocular:

Generation: 3 USField of View (Degrees): 40Magnication: 1XResolution: 64 lp (typical)Film: Thin FilmBrightness Gain: Adjustable from 25 to

more than 3000 fL/fLGate: Autogatedbjective Lens: F/1.2

Eyepiece Lens: EFL 26 mmFocus Range: 25 cm to InnityDiopter Adjustment: +4 to -6 diopters

Voltage Required: 1.5 VoltsBattery Type: One AA sizeBattery Life: Approx. 50 hrs at room temp.Weight w/ batteries: 12.4 oz (351.53 grams)Dimensions: 4.5” (L) x 2” (W) x 2.25” (H)perating TemperatureRange (Degrees Celsius): -51 to +49Storage TemperatureRange (Degrees Celsius): -51 to +85

System Warranty: 3 YearsIntensier Warranty: 5 Years

• High resolution 64 lp (typical), high gain, and high photo response in visible and near inrared• Multiunctional: Hand-held, head-mounted or camera/camcorder adapted• Variable Gain Control or enhanced perormance in altering light conditions• Camera and video adaptable• Comprehensive multi year actory warranty

• ITT PVS-14/17 Gen 3 Night Vision monocular• Head Mount Assembly - Allows or hands-ree operation. Accommodates the user’s head size and eye positioning.• Medium & Thick Brow Pads - Changeable pads.• Head Mount Adapter - Attaches PVS-14/17 to head mount assembly. Allows the user to position the monocular in ront o either eye• Eye Cup - Prevents the emission o stray light or acial refections.• GG&G Battle Pac hard case and ITT Sot Carrying Case.• Shoulder Strap - Attaches to the ITT PVS-14/17 sot carrying case or easy portability.• Lens Paper - Used to lightly clean the objective and eyepiece glass suraces.

Call ur fce or Visit ur Website for Best Value Package Pricing.

Features of ITT NE PVS-14/17 PINNACLE Night Vision Monocular:

Package Contents:

ITT NE PVS-14/17 PINNACLENIGHT VISIoN MoNoCULARITT Night Vision, the world’s leading producer o Generation(Gen) 3 night vision optics, introduces the new Night Enorcer®NEPVS-14/17 PINNACLE Monocular Night Vision Device

(MNVD). The multi-unctional NEPVS-14/17 monocular’slight-weight, single-battery, battle-proven design eaturesthe latest auto-gated, thin-lmed PINNACLE image intensiertube technology as well as variable gain control allowingthe user to increase or decrease image tube brightness orgreater image contrast in varying light conditions. Designedor the most demanding military and law enorcementapplications, the ITT NEPVS-14/17 night vision monocularcan be handheld, head-mounted, helmet-mounted, weapons-mounted and adapted to a camera or camcorder. Night visionmonocular available with tube data sheet.

N I G

H T V I S

I O N S Y S T E M

102

7/16/2019 Gg&g2012cat


There is little doubt that the ITT 6015, PVS-14 and PVS-14/17 night vision monoculars are rugged and well built, but lets ace it, these are expensivepieces o equipment and are not only valuable rom a monetary stand point, but tactically as well. A hard side impact and the unit can be damagedand rendered inoperable. It is imperative that when not in use, you keep it sae rom the elements and the rigors o combat. The sot case included with most ITT monoculars is nice, but will not protect the night vision unit rom impacts. The small hard case previously available is certainly tougbut does not lend itsel to being easily carried into tactical situations. GG&G is now oering The NVM (Night Vision Monocular) Battle Pac, a protectivepolymer hard case to accommodate the ITT 6015, PVS-14 and PVS-14/17 monocular. The NVM Battle Pac is contoured and tted so as to securelyand saely hold these units in the toughest o conditions. This innovative hard case is designed to hold these units with the mounting ring or theGG&G QD Night Vision Mount attached, so there is no hassle with going rom case to mount. It also holds two spare AA batteries. Although the uniis not completely submersible, the overlapping lid provides protection rom rain and snow. It is small enough, 5”X5.5” to t in a ruck sack or can beattached to any belt or webbing up to 2.5 inches wide.

Battle Pac: GGG-1256...$45.00

NVM BATTLE PAC HARD CASEFor The ITT 6015, PVS-14

And PVS-14/17 Night Vision Units

Spare BatteryCompartment

t

5” Wide t t

t

5.5” Tall

t

Inexpensive Insurance for Your Expensive NVG’s

7/16/2019 Gg&g2012cat


You know that it is darn near impossible to properly clean the chamber o an M14/M1A or the M1 Garand. We have come up with a simple and inexpensive way to keep that all important area clean. It’s our new chamber cleaning tool with a rugged polyuniversal joint that allows you to easily get into the chamber area or cleaning. All parts that come in contact with the chambeare manuactured rom non-marring material.

The jag on both models is precision machined rom 6061 T6 aluminum and slotted 1.5 inches deep to accept a cleaning patch The shat is steel with an ergonomic rubber handle. The overall length o the cleaning tool is 14.5 inches.

M14/M1A Chamber Cleaning Tool: GGG-1385...$23.95M1 Garrand Chamber Cleaning Tool: GGG-1186...$23.95

CHAMBER CLEANING TLS FRTHE M14/M1A AND M1 GARAND

A No Hassle Tool For Cleaning The Chamber

Slotted Jag orCleaning Patches

Universal Joint to Aidin Proper Cleaning

Ergonomic Rubber Handle

T O O L S

& F I R E

A R M M A I N T E N

A N C E

104

7/16/2019 Gg&g2012cat


Customers interested in doing “One Stop Shopping” have asked us to manuacture or carry an AR-15 Multi Tool. Instead o re-inventing the wheel we decided to carry one o the best AR-15 Multi-Tools available, the Multi Tool. This is “the” essential tool to have in your kit to perormimportant maintenance unctions or i you are building up or modiying an AR. The AR-15 Multi Tool can be used to install or remove: reefoat tubes and peg-style barrel nuts, standard barrel nuts, carbine stock, compensator, extension tube and buttstock screw. Special eaturesinclude 5⁄8” and 3/4” wrench slots, a 1/2” square hole or socket extensions or a torque wrench, plus a screwdriver tip or the buttstock screwManuactured rom 4140 steel and powder coated, this Multi-Tool will give you years o service.

AR-15 Multi-Tool: GGG-1391....$24.00

AR-15 MULTI-TLne Great Tool To

Perform Seven Functions

7/16/2019 Gg&g2012cat


T O O L S

& F I R E

A R M M A I N T E N

A N C E THE “F.A.T. WRENCH”-

AN ACCURATE HAND HELDINCH PUND TRQUE WRENCH

Accurate SettingsFrom10-60 InchPounds

Most o the products we manuacture require accurate inch pound measurements or proper installation, so we have been onthe lookout or a quality, adjustable inch pound torque wrench that we could recommend to our customers. We think the F.A.T.

Wrench meets those requirements. Beore we promote and sell a product not directly manuactured by GG&G, we take thetime to check it out. We are pleased to say that we tested the F.A.T. Wrench with our calibrated torque wrenches and ound ito consistently be within + or - 3% o our much more expensive wrenches.

The ergonomic design o the wrench body, the readable dial, and the torque adjustment mechanism are user riendly. Theupper torque limits take a little grip strength to attain, but it still alls in the “easy to use” category. The F.A.T. Wrench isadjustable or torques between 10 and 60 inch pounds. The kit includes a square drive adapter bit and nine additional bits The wrench body is approximately 6.25” long and weighs in at just over twelve ounces. That’s sti ll small and lightweighenough to take with you to the range and base camp or emergency adjustments.

F.A.T. Wrench Inch Pound Torque Wrench: GGG-1352...$47.99

106

7/16/2019 Gg&g2012cat


GG&G PCKET T-SHIRTSAre Now Available

Comfortable andGreat Looking!

Shown with Tribal Logo

Many o you have asked us to make our great looking GG&G Logo employee T-shirts available or sale. We have decided tomake these comortable pocket Tees available to the general public. The shirt is a heavyweight 6.1 oz cotton. The shirts are preshrunk with comortable double ply neck band, and double stitched hem and sleeves. Generous long length-cut stays tuckedin. The shirts are silk screened in color with the GG&G logo on the ront and back o the shirt. Medium, Large, X Large, and XXLarge sizes are available. All shirts are $15.00 each.

Medium GGG-7101 Large GGG-7102 X Large GGG-7103 XX Large GGG-7104

G G &

GAPPA

REL

7/16/2019 Gg&g2012cat


SHIPPING AND HANDLINGDue to the large volume o orders we process, all orders or in stock items are shipped in the order they are received. Most are shipped within 3 businessdays. (Business days do not include weekends or holidays.) Please allow 5 business days beore inquiring about the status o your order. We acceptMastercard, Visa and Discover.

All orders are shipped Federal Express or USPS via ground transportation and will normally arrive within 3-7 business days ater shipment. Some itemsdue to weight or size may require additional shipping charges and may take longer to arrive.

IMPRTANT: All orders over $150.00 are shipped “signature required”. It is the customers responsibility to notiy GG&G that they wish to have theirorder shipped without this requirement. I the customer elects not to require a signature upon delivery, the customer assumes all responsibility or the packageonce the carrier certies delivery.

Shipments to Alaska and Hawaii may require additional shipping charges due to the higher costs of delivery to these ares. Please callto verify the shipping costs to these locations.

ALL REQUESTS FR EXPEDITED DELIVER MUST BE MADE B TELEPHNE.

USA EXPEDITED SHIPPING: GG&G Inc will expedite your in stock order to be delivered within 2 business days or an additional $15.00. It is thecustomers responsibility to veriy that a product is in stock at the time o order.

For overnight delivery o your in stock order, add $25.00 to the rate. In stock orders cannot be shipped overnight unless the order is placed prior to

11:00AM Ariona time. It is the customers responsibility to veriy that a product is in stock at the time o order.C..D. CHARGES: On orders up to $300.00, a $10.00 C.O.D. ee will be added to the shipping charge. No C.O.D. ee will be charged or orders over $300.00

Any damaged shipments must be reported to GG&G Inc. immediately or proper claim handling.

INTERNATINAL RDERS: Due to issues o United States National Security, GG&G is no longer taking orders or shipping product to overseascustomers that do not have a legitimate United States reight orwarder that complies with the rules and regulations o the United States ExportAdministration and the International Trac In Arms Regulations.

I you are a United States customer that has Special Requirements or overseas shipments we may be able to accommodate you i you have the properdocumentation. Please contact GG&G or the inormation needed.

SHIPPING T FP/AP/DP ADDRESSES: GG&G will only ship to aithorized and armed APO and IPO addresses.

SHIPPING, HANDLING AND INSURANCE RATESIt is possible that rates may change so please call or current rates.

108

Order Total $ Value Shipping Cost$0 $30.00 $5.95

$30.01 $50.00 $8.95

$50.01 $75.00 $10.00

$75.01 $100.00 $12.00

$100.01 $150.00 $14.00

$150.01 $200.00 $16.00

$200.01 $250.00 $18.00

$250.01 $300.00 $20.00

$300.01 $350.00 $22.00

$350.01 $400.00 $24.00

$400.01 $450.00 $27.00

$450.01 $500.00 $30.00

$500.01 $600.00 $33.00Over $600 Call 520-748-7167

7/16/2019 Gg&g2012cat


GG&G LIFETIME WARRANT RETURN PLICGG&G stands behind every item sold. I a GG&G product ails due to manuacturing, assembly, or material deect, and you have not altered or abused theitem, it will be repaired or replaced, free of charge-for life.

All warranty returns require a Return Material Authorization Number. This number can be aquired by contacting a Product Specialist at GG&G via telephone,520-748-7167, e-mail, warranty @gggaz.com. or by mailing a request to the address indicated below. To return an item, package it securely with the RMANumber clearly marked on the outside o the package. Packages shipped to GG&G will not be accepted without an RMA number marked on the outside o

the box. Merchandise will be repaired or replaced as soon as possible and shipped back to the customer.

All warranties or non GG&G manuactured products are through the original manuacturer. GG&G does not warrant any non GG&G manuactured productsbeyond the manuacturers warranty. No other warranties are expressed or implied.

3602 EAST 42ND STRAVENUETUCSN, ARIzNA 85713

(520) 748-7167 FAX (520) 748-7583Web Site: www.ggga.com E-mail: [email protected]

GG&G

WARRANTY REQUEST

GG&G MERCHANDISE RETURN PLIC(NN-WARRANT)GG&G retail customers returning merchandise within 15 days o purchase or any non-warranty reason will receive a ull reund less shipping costs.

I merchandise is returned later than 15 days rom the purchase date, a 15% restocking charge will be deducted rom the reund with a $10.00minimum charge.

GG&G will not accept non-warranty merchandise returns ater 30 days rom the date o purchase.

In addition, an RMA Number must be obtained by contacting a Product Specialist at GG&G via telephone, 520-748-7167. The returned product must be packagedsecurely, and the RMA Number must be clearly marked on the outside o the package. Shipping costs and any applicable sales tax will not be reunded.

All merchandise being returned or credit must be in the original packaging and be in like new, unused condition or credit will not be issued.

GG&G will not accept returns o this nature which have a cost o $25.00 or less, due to processing costs.

7/16/2019 Gg&g2012cat


NTES

7/16/2019 Gg&g2012cat


Documents

Gg&g2012cat