Art

icle

Lis

t G

etin

ge K

-ser

ies

Rev

B 1

5100

1 E

N

Getinge K-seriesArticle List

Getinge K3+ • 10 l rectangular chamber, 140 x 200 x 345 (H x W x D). • Equal in its loading capacity to 18 liter round chamber:

3 cassettes or 6 trays

Stainless steel version Art. no 978044503Stainless steel cover

White version Art. no 978044504White powder-coated stainless steel cover

Getinge K5+ • 15 l rectangular chamber, 220 x 200 x 345 (H x W x D).• Better loading capacity than any other competitor on the market today:

5 cassettes or 10 trays

Stainless steel version Art. no 978046303Stainless steel cover

White version Art. no 978046304White powder-coated stainless steel cover

Getinge K7+ • 20 l rectangular chamber 220 x 200 x 445 (H x W x D).• Superior loading capacity with a deep chamber. Added 100 mm to K5 capacity

Stainless steel version Art. no 978047503Stainless steel cover

White version Art. no 978047504White powder-coated stainless steel cover

For more information, see www.quadro.getinge.com and www.getinge.com Program combinations and further specifications, see separate Product specification. Subject to change without notice.

Tabletop sterilizer with pre- and post-vacuum (B-process)

• Rectangular stainless steel chamber for maximum load capacity

• Space-saving sliding door

• Water reservoir made of easy-to-clean stainless steel

• Fully prepared for connecting the sterilizer to the main water supply

• Built-in water quality control as standard

• Stainless steel construction – chamber in 316Ti, booster tank and cover in 304

General Specification

Page 2 of 6

KS

ER

IES

_PR

OD

FLY

ER

_AR

TLIS

T_R

EV

B_1

5100

1_E

N_N

ON

US

Additional Options

K3+ Manometer Art. no 48320425For monitoring the steam pressure in the chamber. The manometer is mounted in the door.

K5+ and K7+ Manometer Art. no 48320424For monitoring the steam pressure in the chamber. The manometer is mounted in the door.

No picture

Deionizer DI3G Art. no 6011000298System comes ready-to-use with dry filter cartridges, tubing, filter wrench, installation material and manual.

Kit for connection to existing water treatment system Art. no 48320215If deionized or RO water is available at site of use, this kit shall be used. It is basically a water connection kit without the deionizer tube.

2-tank system Art. no 48320187A second water reservoir is connected to the sterilizer. This is done with a suction system with a built-in level control (same as suction system for disinfectors).When the reservoir gets empty an alarm is shown on the display.

Installation Options

P01 WRAPPEDSTART OK

Page 3 of 6

KS

ER

IES

_PR

OD

FLY

ER

_AR

TLIS

T_R

EV

B_1

5100

1_E

N_N

ON

US

Racks NOTE! The K-series sterilizers should never be used without rack.

K3+ Rack without supporting levels Art. no 48320177Aluminum rack for containers, chamber size.

K3+ Rack Art. no 48320078Aluminum rack with roof and 3 supporting levels, 44 mm.Delivered with ordered sterilizer.

K3+ Rack Art. no 48320300Aluminum rack with roof and 5 supporting levels, 26 mm.

K3+ Rack Art. no 48320436Aluminum rack with roof and 6 supporting levels, 21.5 mm.

K5+ Rack without supporting levels Art. no 48320178Aluminum rack for containers, chamber size.

K5+ Rack Art. no 48320116Aluminum rack with roof and 3 supporting levels, 70 mm.

K5+ Rack Art. no 48320080Aluminum rack with roof and 4 supporting levels, 52 mm.

K5+ Rack Art. no 48320042Aluminum rack with roof and 5 supporting levels, 42 mm.Delivered with ordered sterilizer.

K5+ Rack Art. no 48320395Aluminum rack with roof and 10 supporting levels, 20.5 mm.

K7+ Rack without supporting levels Art. no 48320179Aluminum rack for containers, chamber size.

K7+ Rack Art. no 48320117Aluminum rack with roof and 3 supporting levels, 70 mm.

K7+ Rack Art. no 48320126Aluminum rack with roof and 4 supporting levels, 52 mm.

K7+ Rack Art. no 48320043Aluminum rack with roof and 5 supporting levels, 42 mm.Delivered with ordered sterilizer.

K7+ Rack Art. no 48320440Aluminum rack with roof and 10 supporting levels, 20.5 mm

No picture

Page 4 of 6

KS

ER

IES

_PR

OD

FLY

ER

_AR

TLIS

T_R

EV

B_1

5100

1_E

N_N

ON

US

Receipt printer Martel Art. no 4836100Thermal printer, all included to be connected direct to the sterilizer. Silent running easy-to-use printer. If using the 4836098 paper, and the paper is stored under right conditions, the print-out lasts for 15 years.

Paper for Martel printer Art. no 4836098Thermal paper. Achievability 15 years acc. to certificate if stored at 23 ±5 °C in 50 ±10% atmospheric humidity, dark, and no mechanical influence. Delivered in package of one.

Getinge Log LAN Art. no 6011000327In the Getinge Log LAN version, the process data is transferred to a PC via the practice network and there it is filed in a database in encrypted form. The data can additionally be stored as a secure PDF.

Getinge Log USB Art. no 6011000326If there is no network connection available, with Getinge Log USB, the data on the device can be stored on the USB stick and transferred to the PC. The transfer can take place after each machine operation or at the end of a work day.

Filter set for deionizer Art. no 6011000303Filter set including one sediment cartridge, two ion-exchange cartridges and one lubricant for o-rings.

LK-tray of temperature resistant plastic material Art. no 4835364Fibre tray with built-in instrument holder. Mainly for dental use, but can also be used for other applications. Can be wrapped in paper-plastic pouch for sterile storage. Dimensions: 284 x 186 x 20 mm

Dental tray, “mini”, with lid and instrument holder, aluminum Art. no 4835981Unperforated base tray with unperforated lid, including removable instrument holder, aluminum. Can be wrapped in paper-plastic pouch for sterile storage. Dimensions: 145 x 186 x 39 mm

Dental tray with lid and instrument holder, aluminum Art. no 4835362Perforated base tray with unperforated lid, including removable instrument holder, aluminum. Can be wrapped in paper-plastic pouch for sterile storage. Dimensions: 287 x 186 x 39 mm.

K5+ and K7+ holder for standing pouches, thread version Art. no 4839982Stainless pouch holder with three compartments for wrapped instruments, holder made of stainless steel thread.

Accessories

Page 5 of 6

KS

ER

IES

_PR

OD

FLY

ER

_AR

TLIS

T_R

EV

B_1

5100

1_E

N_N

ON

US

Holder “spring” for standing pouches, “hook” version Art. no 483937271Stainless pouch holder for wrapped instruments. Expansible spring to be placed vertical. The spring can be hooked on the perforation on the tray or instrument basket.

Holder “spring” for standing pouches, free standing version Art. no 483937270Stainless pouch holder for wrapped instruments. Spring to be placed vertical, direct on the tray or on the instrument basket.

Silicone grabber Art. no 4836409Hot plate grip in silicone. This high-quality silicone grabber is diswasher safe and resists heat up to 250 °C.

Handle for aluminum trays and LK-trays Art. no 4839057Handle to simplify loading and unloading of trays with 15-20 mm in height.

Handle for aluminum trays and stainless instrument trays Art. no 483759370Handle to simplify loading and unloading of trays with 15-20 mm and 38 mm in height.

Handle for dental trays with lid Art. no 48320022Handle to simplify loading and unloading of dental cassettes with lid.

Instrument tray, stainless Art. no 4839975Tray made of stainless steel thread. Dimensions: 100 x 190 x 38 mm

Instrument tray, stainless Art. no 4839962Stainless steel instrument tray for the full length of the K3 and K5. Fits also in K7. Dimensions: 330 x 190 x 38 mm

K7+ Instrument tray, stainless Art. no 48320121Stainless steel instrument tray, uses the full length of the K7, does not fit K3 or K5. Dimensions: 425 x 190 x 38 mm

Tray, perforated, aluminum Art. no 4835576Aluminum tray for all chamber sizes. Dimensions: 285 x 185 x 19 mm

K7+ Tray, perforated, aluminum Art. no 48320089Aluminum tray using the full length of the K7 chamber. Does not fit K3 or K5. Dimensions: 425 x 189 x 15 mm

Accessories (continued)

Art

icle

Lis

t G

etin

ge K

-ser

ies

Rev

B 1

5100

1 E

N

Absolute manometer, 1/4” connection Art. no 4839420Digital absolute pressure manometer for the calibration of the sterilizer pressure transducers. Including a kit of couplings for adoption to most sterilizers

Test instrument for tap water quality Art. no 4835661To check the water quality for steam generation (0 to 99 μS).

Test instrument for tap water quality Art. no 4836004To check the tap water quality (10 to 1,000 μS).

Thermo instrument (for measuring steam generator temperature) Art. no 4835967To be put into the measurement hole on the front side of the sterilizer.

Service Equipment

Getinge Group is a leading global provider of products and systems that contribute to quality enhancement and cost efficiency within healthcare and life sciences. We operate under the three brands of ArjoHuntleigh, Getinge and Maquet.

Getinge Infection Control ABP O Box 69305 05 Getinge, SwedenPhone: +46 (0)10 335 00 00info@getinge.comwww.getinge.com