gesis ELECTRONIC · Web view® FLEX is designed for decentral installation without further housing. A device always consists of a base module and expansion modules. The modules can

Tender text Wieland Electric GmbH

1 gesis® FLEX – Modular, flat, direct pluggable KNX building automation system........................21.1 Base modules..................................................................................................................................... 21.2 Power supply modules....................................................................................................................... 51.3 Binary inputs....................................................................................................................................... 71.4 Binary outputs.................................................................................................................................... 91.5 Dimming outputs.............................................................................................................................. 131.6 Shutter outputs................................................................................................................................. 161.7 Semiconductor outputs................................................................................................................... 221.8 EnOcean Gateway............................................................................................................................ 261.9 FanCoil Controller............................................................................................................................ 281.10 System-compatible housings..........................................................................................................311.11 Pre-assembled system-compatible housings................................................................................331.12 Extension cables.............................................................................................................................. 341.13 Accessories....................................................................................................................................... 362 gesis® EIB RM – Modular KNX building automation system........................................................402.1 Base module..................................................................................................................................... 402.2 Power supplies................................................................................................................................. 412.3 Binary input....................................................................................................................................... 422.4 Switching output............................................................................................................................... 432.5 Sunblind outputs.............................................................................................................................. 442.6 Dimming outputs.............................................................................................................................. 452.7 Semiconductor outputs................................................................................................................... 472.8 Radio controlled input...................................................................................................................... 492.9 Accessories....................................................................................................................................... 503 gesis® EIB V – Flat, direct pluggable KNX building automation system.....................................513.1 Switching outputs............................................................................................................................. 513.2 Sunblind outputs.............................................................................................................................. 533.3 Combined actuators.........................................................................................................................553.4 Switch/dim outputs........................................................................................................................... 574 gesis® KNX – System components and room automation...........................................................594.1 Presence and motion sensors.........................................................................................................594.2 Push button interface.......................................................................................................................624.3 DALI................................................................................................................................................... 644.4 Single room temperature control....................................................................................................654.5 System components......................................................................................................................... 685 gesis® RC – EnOcean technology..................................................................................................725.1 Flat, direct pluggable actuators.......................................................................................................725.2 Switching outputs for outside applications...................................................................................755.3 Flush-mounted actuator...................................................................................................................765.4 EnOcean output................................................................................................................................ 775.5 Window contact................................................................................................................................ 785.6 EnOcean Gateway............................................................................................................................ 795.7 Handheld transmitter........................................................................................................................815.8 Multivendor radio switches..............................................................................................................825.9 Radio switch,..................................................................................................................................... 875.10 Hotel-Card-Switch............................................................................................................................. 965.11 Accessories....................................................................................................................................... 986 gesis® – Applications designed to be pluggable...........................................................................997 gesis® ELECTRONIC IP+ – EnOcean Receiver and LED control gear IP68...............................1057.1 EnOcean Receiver.......................................................................................................................... 1057.2 Constant current generator...........................................................................................................1067.3 Constant voltage generator...........................................................................................................1077.4 Transformer for low-voltage halogen luminaires.........................................................................1087.5 Accessories..................................................................................................................................... 109

Page 1/110


1 gesis® FLEX – Modular, flat, direct pluggable KNX building automation system

The modular KNX series gesis® FLEX is designed for decentral installation without further housing. A device always consists of a base module and expansion modules. The modules can control lighting, shutters, valves or integrate potential-free contacts with binary inputs in building automation. The mains supply and the internal bus contact automatically when the modules are combined. In-between feed-in modules allow separate fuses for different functions.Because of the flat shape, the connection from one side, well-thought-out mounting options and the modular concept of this system fits in almost any space. The strictly pluggable design allows a fast, secure, and simple connection. The manual control directly on the modules simplifies start-up and troubleshooting. In combination with the plug ability this results in a clear interface between system integration and installation. Because only standard modules are used, changes during the planning, implementation or operational phase can be realized quickly.

1.1 Base modules

gesis® FLEX base module with 3-phase supply

System gesis® FLEX - The 3-phase supplied KNX base module with flat surface mounted housing, which can be fitted on DIN rails for decentralized installation, supports 6 expansion modules. They support all the common inputs and outputs, and they provide extensive room automation with only one physical address. The manual operation level allows function tests without prior system integration. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation.

Supply KNX:Nominal voltage: KNX System voltageNominal current: ca. 5 mASupply mains:Nominal voltage: 230/400 V AC Nominal current: 3x16 AExpandability:Expansion module: 6, system-compatiblePower supply module: anySystem-compatible housing: anySystem extension: with pre-fabricated cable max. 1 mMaximum length: summation of all modules width incl. system extensionManual control: buttons on moduleStatus bar: LEDs on moduleElectrical connections: connections for sensors and loads according to IEC 61535, incl.mains supply, KNX connection according to KNX handbookProtection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 115 mm (127 mm incl. left and right end cap)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areasAccessories: needed end caps are part of the delivery

Brand: Wieland Electric GmbHType: KNX FLEX-BASPart No.: 83.020.0600.0

gesis® FLEX base module with 3-phase supply incl. gesis® plugs

System gesis® FLEX - The 3-phase supplied KNX base module with flat surface mounted housing, which can be fitted on DIN rails for decentralized installation, supports 6 expansion modules. They support all the common inputs and outputs, and they provide extensive room automation with only one physical address. The manual operation level allows function tests without prior system integration. The electrical connections,

Page 2/110


which are pluggable in accordance with IEC 61535, separate automation and installation. All necessary plugs are enclosed.

Supply KNX:Nominal voltage: KNX System voltageNominal current: ca. 5 mASupply mains:Nominal voltage: 230/400 V AC Nominal current: 3x16 AExpandability:Expansion module: 6, system-compatiblePower supply module: anySystem-compatible housing: anySystem extension: with pre-fabricated cable max. 1 mMaximum length: summation of all modules width incl. system extensionManual control: buttons on moduleStatus bar: LEDs on moduleElectrical connections: connections for sensors and loads according to IEC 61535, incl.mains supply, KNX connection according to KNX handbookProtection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 115 mm (127 mm incl. left and right end cap)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areasAccessories: needed end caps as well as plugs are part of the delivery

Brand: Wieland Electric GmbHType: KNX FLEX-BAS ZPart No.: 83.020.0600.1

gesis® FLEX base module with 1-phase supply

System gesis® FLEX - The 1-phase supplied KNX base module with flat surface mounted housing, which can be fitted on DIN rails for decentralized installation, supports 6 expansion modules. They support all the common inputs and outputs, and they provide extensive room automation with only one physical address. The manual operation level allows function tests without prior system integration. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation.

Supply KNX:Nominal voltage: KNX System voltageNominal current: ca. 5 mASupply mains:Nominal voltage: 230 V AC Nominal current: 16 AExpandability:Expansion module: 6, system-compatiblePower supply module: anySystem-compatible housing: anySystem extension: with pre-fabricated cable max. 1 mMaximum length: summation of all modules width incl. system extensionManual control: buttons on moduleStatus bar: LEDs on moduleElectrical connections: connections for sensors and loads according to IEC 61535, incl.mains supply, KNX connection according to KNX handbookProtection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part black

Page 3/110


Dimensions:Length: 115 mm (127 mm incl. left and right end cap)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areasAccessories: needed end caps are part of the delivery

Brand: Wieland Electric GmbHType: KNX FLEX-BAS SPPart No.: 83.020.0601.0

gesis® FLEX base module with 1-phase supply incl. gesis® plugs

System gesis® FLEX - The 1-phase supplied KNX base module with flat surface mounted housing, which can be fitted on DIN rails for decentralized installation, supports 6 expansion modules. They support all the common inputs and outputs, and they provide extensive room automation with only one physical address. The manual operation level allows function tests without prior system integration. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation. All necessary plugs are enclosed.

Supply KNX:Nominal voltage: KNX System voltageNominal current: ca. 5 mASupply mains:Nominal voltage: 230 V AC Nominal current: 16 AExpandability:Expansion module: 6, system-compatiblePower supply module: anySystem-compatible housing: anySystem extension: with pre-fabricated cable max. 1 mMaximum length: summation of all modules width incl. system extensionManual control: buttons on moduleStatus bar: LEDs on moduleElectrical connections: connections for sensors and loads according to IEC 61535, incl.mains supply, KNX connection according to KNX handbookProtection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 115 mm (127 mm incl. left and right end cap)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areasAccessories: needed end caps as well as plugs are part of the delivery

Brand: Wieland Electric GmbHType: KNX FLEX-BAS SP ZPart No.: 83.020.0601.1

Page 4/110


1.2 Power supply modules

gesis® FLEX power supply module 3-phase

System gesis® FLEX - The 3-phase power supply module with flat surface mounted housing, which can be fitted on DIN rails for decentralized installation, allows a mains supply separate from the base module within a modular system. This means that the output loads can be split over different fuse circuits. It can be integrated in the system as often as required. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation.

Supply mains:Nominal voltage: 230/400 V AC Nominal current: 3x16 AElectrical connections: Mains supply according to IEC 61535Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 95 mm (assembled)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areas

Brand: Wieland Electric GmbHType: FLEX-MSPart No.: 83.020.0610.0

gesis® FLEX power supply module 3-phase incl. gesis® plugs

System gesis® FLEX - The 3-phase power supply module with flat surface mounted housing, which can be fitted on DIN rails for decentralized installation, allows a mains supply separate from the base module within a modular system. This means that the output loads can be split over different fuse circuits. It can be integrated in the system as often as required. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation. All necessary plugs are enclosed.

Supply mains:Nominal voltage: 230/400 V AC Nominal current: 3x16 AElectrical connections: Mains supply according to IEC 61535Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 95 mm (assembled)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areasAccessories: needed plugs are part of the delivery

Brand: Wieland Electric GmbHType: FLEX-MS ZPart No.: 83.020.0610.1

gesis® FLEX power supply module 1-phase

The 1-phase power supply module with flat surface mounted housing, which can be fitted on DIN rails for decentralized installation, allows a mains supply separate from the base module within a modular system. This means that the output loads can be split over different fuse circuits. It can be integrated in the system as

Page 5/110


often as required. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation.

Supply mains:Nominal voltage: 230 V AC Nominal current: 16 AElectrical connections: Mains supply according to IEC 61535Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 95 mm (assembled)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areas

Brand: Wieland Electric GmbHType: FLEX-MS SPPart No.: 83.020.0611.0

gesis® FLEX power supply module 1-phase incl. gesis® plugs

System gesis® FLEX - The 1-phase power supply module with flat surface mounted housing, which can be fitted on DIN rails for decentralized installation, allows a mains supply separate from the base module within a modular system. This means that the output loads can be split over different fuse circuits. It can be integrated in the system as often as required. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation. All necessary plugs are enclosed.

Supply mains:Nominal voltage: 230 V AC Nominal current: 16 AElectrical connections: Mains supply according to IEC 61535Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 95 mm (assembled)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areasAccessories: needed plugs are part of the delivery

Brand: Wieland Electric GmbHType: FLEX-MS SP ZPart No.: 83.020.0611.1

Page 6/110


1.3 Binary inputs

gesis® FLEX binary input 8-fold

System gesis® FLEX - The 8-fold binary input 12 VDC, for connecting potential-free contacts, with flat surface mounted housing which can be fitted on in DIN rail for decentralized installation, is managed by the base module. It receives mains and bus supply from the upstream module. The extensive parameter set enables different automation functions. The manual operation level allows function tests without prior system integration. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation.

Supply internal bus: via upstream moduleSupply mains: via upstream moduleSignal voltage: 12 V DC (SELV)Power-on time: 100 % for all inputs at a timeMax. cable length: 100 mManual control: buttons on moduleStatus bar: LEDs on moduleElectrical connections: all connections for sensors according to IEC 61535Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 95 mm (assembled)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areas

Brand: Wieland Electric GmbHType: FLEX-8/0 (12)Part No.: 83.020.0622.0

gesis® FLEX binary input 8-fold incl. gesis® plugs

System gesis® FLEX - The 8-fold binary input 12 VDC, for connecting potential-free contacts, with flat surface mounted housing which can be fitted on in DIN rail for decentralized installation, is managed by the base module. It receives mains and bus supply from the upstream module. The extensive parameter set enables different automation functions. The manual operation level allows function tests without prior system integration. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation. All necessary plugs are enclosed.

Supply internal bus: via upstream moduleSupply mains: via upstream moduleSignal voltage: 12 V DC (SELV)Power-on time: 100 % for all inputs at a timeMax. cable length: 100 mManual control: buttons on moduleStatus bar: LEDs on moduleElectrical connections: all connections for sensors according to IEC 61535Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 95 mm (assembled)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areasAccessories: needed plugs are part of the delivery

Page 7/110


Brand: Wieland Electric GmbHType: FLEX-8/0 (12) ZPart No.: 83.020.0622.1

Page 8/110


1.4 Binary outputs

gesis® FLEX binary output 4-fold

System gesis® FLEX - The 4-fold relay output 230 V/16 A, with flat surface mounted housing which can be fitted on DIN rails for decentralized installation, is managed by the base module. It receives mains and bus supply from the upstream module. The extensive parameter set enables different automation functions. The manual operation level allows function tests without prior system integration. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation.

Supply internal bus: via upstream moduleSupply mains: via upstream moduleNominal voltage: 230 V ACNominal current: 16 A (ohmic load)Inrush current: max. 200 A (50 ms)Number: 4 binary outputs (bistable relay)Manual control: buttons on moduleStatus bar: LEDs on moduleElectrical connections: all connections for loads according to IEC 61535Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 130 mm (assembled)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areas

Brand: Wieland Electric GmbHType: FLEX-0/4Part No.: 83.020.0623.0

gesis® FLEX binary output 4-fold incl. gesis® plugs

System gesis® FLEX - The 4-fold relay output 230 V/16 A, with flat surface mounted housing which can be fitted on DIN rails for decentralized installation, is managed by the base module. It receives mains and bus supply from the upstream module. The extensive parameter set enables different automation functions. The manual operation level allows function tests without prior system integration. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation. All necessary plugs are enclosed.

Supply internal bus: via upstream moduleSupply mains: via upstream moduleNominal voltage: 230 V ACNominal current: 16 A (ohmic load)Inrush current: max. 200 A (50 ms)Number: 4 binary outputs (bistable relay)Manual control: buttons on moduleStatus bar: LEDs on moduleElectrical connections: all connections for loads according to IEC 61535Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 130 mm (assembled)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areasAccessories: needed plugs are part of the delivery

Page 9/110


Brand: Wieland Electric GmbHType: FLEX-0/4 ZPart No.: 83.020.0623.1

gesis® FLEX C-load relay output 4-fold

System gesis® FLEX - The 4-fold C-load relay output 230 V/16 A, with flat surface mounted housing which can be fitted on DIN rails for decentralized installation, is managed by the base module. It receives mains and bus supply from the upstream module. The extensive parameter set enables different automation functions. The manual operation level allows function tests without prior system integration. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation.

Supply internal bus: via upstream moduleSupply mains: via upstream moduleNominal voltage: 230 V ACNominal current: 16 A (ohmic load)Peak inrush current: 16 AX, 140 µF (EN 60669-1)Number: 4 binary outputs (bistable relay)Manual control: buttons on moduleStatus bar: LEDs on moduleElectrical connections: all connections for loads according to IEC 61535Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 130 mm (assembled)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areas

Brand: Wieland Electric GmbHType: FLEX-0/4PPart No.: 83.020.0626.0

gesis® FLEX C-load relay output 4-fold incl. gesis® plugs

System gesis® FLEX - The 4-fold C-load relay output 230 V/16 A, with flat surface mounted housing which can be fitted on DIN rails for decentralized installation, is managed by the base module. It receives mains and bus supply from the upstream module. The extensive parameter set enables different automation functions. The manual operation level allows function tests without prior system integration. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation. All necessary plugs are enclosed.

Supply internal bus: via upstream moduleSupply mains: via upstream moduleNominal voltage: 230 V ACNominal current: 16 A (ohmic load)Peak inrush current: 16 AX, 140 µF (EN 60669-1)Number: 4 binary outputs (bistable relay)Manual control: buttons on moduleStatus bar: LEDs on moduleElectrical connections: all connections for loads according to IEC 61535Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 130 mm (assembled)Width: 149 mm incl. plug locking

Page 10/110


Height: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areasAccessories: needed plugs are part of the delivery

Brand: Wieland Electric GmbHType: FLEX-0/4P ZPart No.: 83.020.0626.1

gesis® FLEX binary output 3-fold for emergency lighting

System gesis® FLEX - The 3-fold relay output 230 V/16 A for emergency lighting, with flat surface mounted housing which can be fitted on DIN rails for decentralized installation, is managed by the base module. It receives mains and bus supply from the upstream module. The pluggable 4-pole outputs provide N, PE, permanent 230 V and switched 230 V. The extensive parameter set enables different automation functions. The manual operation level allows function tests without prior system integration. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation.

Supply internal bus: via upstream moduleSupply mains: via upstream moduleNominal voltage: 230 V ACNominal current: 16 A (ohmic load)Inrush current: max. 200 A (50 ms)Number: 3 binary outputs (bistable relay) in combination with permanent 230 VManual control: buttons on moduleStatus bar: LEDs on moduleElectrical connections: all connections for loads according to IEC 61535Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 130 mm (assembled)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areas

Brand: Wieland Electric GmbHType: FLEX-0/3ELPart No.: 83.020.0636.0

gesis® FLEX binary output 3-fold for emergency lighting incl. gesis® plugs

System gesis® FLEX - The 3-fold relay output 230 V/16 A for emergency lighting, with flat surface mounted housing which can be fitted on DIN rails for decentralized installation, is managed by the base module. It receives mains and bus supply from the upstream module. The pluggable 4-pole outputs provide N, PE, permanent 230 V and switched 230 V. The extensive parameter set enables different automation functions. The manual operation level allows function tests without prior system integration. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation. All necessary plugs are enclosed.

Supply internal bus: via upstream moduleSupply mains: via upstream moduleNominal voltage: 230 V ACNominal current: 16 A (ohmic load)Inrush current: max. 200 A (50 ms)Number: 3 binary outputs (bistable relay) in combination with permanent 230 VManual control: buttons on moduleStatus bar: LEDs on moduleElectrical connections: all connections for loads according to IEC 61535Protection class: IP20Housing: halogen-free

Page 11/110


Flammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 130 mm (assembled)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areasAccessories: needed plugs are part of the delivery

Brand: Wieland Electric GmbHType: FLEX-0/3EL ZPart No.: 83.020.0636.1

Page 12/110


1.5 Dimming outputs

gesis® FLEX DALI output 4-fold (DALI signal)

System gesis® FLEX - The DALI2 output 4-fold for four separate controlled broadcast channels each for 16 DALI ballasts, with flat surface mounted housing which can be fitted on DIN rails for decentralized installation, is managed by the base module. The outputs are 2-pole, pluggable and contain DALI signal. It receives mains and bus supply from the upstream module. The extensive parameter set enables different automation functions. The manual operation level allows function tests without prior system integration. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation.

Supply internal bus: via upstream moduleSupply mains: via upstream moduleNominal voltage: 230 V ACNumber: 4x DALI broadcastDALI voltage: > 11,5 V, < 22,5 V (EN 60929)Load capacity: 16 DALI attendees according to EN 60929 at each outputManual control: buttons on moduleStatus bar: LEDs on moduleElectrical connections: all connections for loads according to IEC 61535Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 130 mm (assembled)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areas

Brand: Wieland Electric GmbHType: FLEX-0/4DAPart No.: 83.020.0630.0

gesis® FLEX DALI output 4-fold (DALI signal) incl. gesis® plugs

System gesis® FLEX - The DALI2 output 4-fold for four separate controlled broadcast channels each for 16 DALI ballasts, with flat surface mounted housing which can be fitted on DIN rails for decentralized installation, is managed by the base module. The outputs are 2-pole, pluggable and contain DALI signal. It receives mains and bus supply from the upstream module. The extensive parameter set enables different automation functions. The manual operation level allows function tests without prior system integration. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation. All necessary plugs are enclosed.

Supply internal bus: via upstream moduleSupply mains: via upstream moduleNominal voltage: 230 V ACNumber: 4x DALI broadcastDALI voltage: > 11,5 V, < 22,5 V (EN 60929)Load capacity: 16 DALI attendees according to EN 60929 at each outputManual control: buttons on moduleStatus bar: LEDs on moduleElectrical connections: all connections for loads according to IEC 61535Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 130 mm (assembled)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN rail

Page 13/110


Mounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areasAccessories: needed plugs are part of the delivery

Brand: Wieland Electric GmbHType: FLEX-0/4DA ZPart No.: 83.020.0630.1

gesis® FLEX DALI output 3-fold (DALI signal + mains)

System gesis® FLEX - The DALI2 output 3-fold (DALI + 230 V) for three separate controlled broadcast channels each for 16 DALI ballasts, with flat surface mounted housing which can be fitted on DIN rails for decentralized installation, is managed by the base module. The outputs are 5-pole, pluggable and contain DALI signal and 230 V mains. It receives mains and bus supply from the upstream module. The extensive parameter set enables different automation functions. The manual operation level allows function tests without prior system integration. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation.

Supply internal bus: via upstream moduleSupply mains: via upstream moduleNominal voltage: 230 V ACNominal current: 16 A (ohmic load)Number: 4x DALI broadcastDALI voltage: > 11,5 V, < 22,5 V (EN 60929)Load capacity: 16 DALI attendees according to EN 60929 at each outputManual control: buttons on moduleStatus bar: LEDs on moduleElectrical connections: all connections for loads according to IEC 61535Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 130 mm (assembled)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areas

Brand: Wieland Electric GmbHType: FLEX-0/3DA ACPart No.: 83.020.0641.0

gesis® FLEX DALI output 3-fold (DALI signal + mains) incl. gesis® plugs

System gesis® FLEX - The DALI2 output 3-fold (DALI + 230 V) for three separate controlled broadcast channels each for 16 DALI ballasts, with flat surface mounted housing which can be fitted on DIN rails for decentralized installation, is managed by the base module. The outputs are 5-pole, pluggable and contain DALI signal and 230 V mains. It receives mains and bus supply from the upstream module. The extensive parameter set enables different automation functions. The manual operation level allows function tests without prior system integration. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation. All necessary plugs are enclosed.

Supply internal bus: via upstream moduleSupply mains: via upstream moduleNominal voltage: 230 V ACNominal current: 16 A (ohmic load)Number: 4x DALI broadcastDALI voltage: > 11,5 V, < 22,5 V (EN 60929)Load capacity: 16 DALI attendees according to EN 60929 at each outputManual control: buttons on moduleStatus bar: LEDs on moduleElectrical connections: all connections for loads according to IEC 61535

Page 14/110


Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 130 mm (assembled)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areasAccessories: needed plugs are part of the delivery

Brand: Wieland Electric GmbHType: FLEX-0/3DA AC ZPart No.: 83.020.0641.1

Page 15/110


1.6 Shutter outputs

gesis® FLEX shutter output 2-fold

System gesis® FLEX - The 2-fold shutter output 230 V/8 A, with flat surface mounted housing which can be fitted on in DIN rail for decentralized installation, is managed by the base module. It receives mains and bus supply from the upstream module. The parameter set enables different automation functions. The manual operation level allows function tests without prior system integration. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation.

Supply internal bus: via upstream moduleSupply mains: via upstream moduleNominal voltage: 230 V ACNominal current: 8 A (ohmic load)Number: 2 shutter outputs (4-pole, up/down)Manual control: buttons on moduleStatus bar: LEDs on moduleElectrical connections: all connections for loads according to IEC 61535Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 130 mm (assembled)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areas

Brand: Wieland Electric GmbHType: FLEX-0/2WPart No.: 83.020.0624.0

gesis® FLEX shutter output 2-fold incl. gesis® plugs

System gesis® FLEX - The 2-fold shutter output 230 V/8 A, with flat surface mounted housing which can be fitted on in DIN rail for decentralized installation, is managed by the base module. It receives mains and bus supply from the upstream module. The parameter set enables different automation functions. The manual operation level allows function tests without prior system integration. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation. All necessary plugs are enclosed.

Supply internal bus: via upstream moduleSupply mains: via upstream moduleNominal voltage: 230 V ACNominal current: 8 A (ohmic load)Number: 2 shutter outputs (4-pole, up/down)Manual control: buttons on moduleStatus bar: LEDs on moduleElectrical connections: all connections for loads according to IEC 61535Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 130 mm (assembled)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areasAccessories: needed plugs are part of the delivery

Brand: Wieland Electric GmbH

Page 16/110


Type: FLEX-0/2W ZPart No.: 83.020.0624.1

gesis® FLEX fused shutter output 2-fold

System gesis® FLEX - The fused 2-fold shutter output 230 V/3 A, with flat surface mounted housing which can be fitted on in DIN rail for decentralized installation, is managed by the base module. Each output is fused with a 3.15 AT fine-wire-fuse. It receives mains and bus supply from the upstream module. The parameter set enables different automation functions. The manual operation level allows function tests without prior system integration. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation.

Supply internal bus: via upstream moduleSupply mains: via upstream moduleNominal voltage: 230 V ACNominal current: 3 A per output (ohmic load)Fuse: T3, 3.15 AT fine-wire-fuse per outputNumber: 2 shutter outputs (4-pole, up/down)Manual control: buttons on moduleStatus bar: LEDs on moduleElectrical connections: all connections for loads according to IEC 61535Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 130 mm (assembled)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areas

Brand: Wieland Electric GmbHType: FLEX-0/2W FPart No.: 83.020.0634.0

gesis® FLEX fused shutter output 2-fold incl. gesis® plugs

System gesis® FLEX - The fused 2-fold shutter output 230 V/3 A, with flat surface mounted housing which can be fitted on in DIN rail for decentralized installation, is managed by the base module. Each output is fused with a 3.15 AT fine-wire-fuse. It receives mains and bus supply from the upstream module. The parameter set enables different automation functions. The manual operation level allows function tests without prior system integration. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation. All necessary plugs are enclosed.

Supply internal bus: via upstream moduleSupply mains: via upstream moduleNominal voltage: 230 V ACNominal current: 3 A per output (ohmic load)Fuse: T3, 3.15 AT fine-wire-fuse per outputNumber: 2 shutter outputs (4-pole, up/down)Manual control: buttons on moduleStatus bar: LEDs on moduleElectrical connections: all connections for loads according to IEC 61535Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 130 mm (assembled)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN rail

Page 17/110



Brand: Wieland Electric GmbHType: FLEX-0/2W F ZPart No.: 83.020.0634.1

gesis® FLEX shutter output 2-fold DC

System gesis® FLEX - The 2-fold shutter output 24 V DC/3 A, with flat surface mounted housing which can be fitted on in DIN rail for decentralized installation, is managed by the base module. It receives the internal supply from the upstream module. The 24V supply is externally. The parameter set enables different automation functions. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation.

Supply internal bus: via upstream moduleSupply mains: via upstream moduleNominal voltage: 230 V ACNumber: 2 shutter outputs (2-pole, up/down, polarity turn)Nominal voltage: 6…24 V DC (via external power supply)Nominal current: 3 A for each outputManual control: buttons on moduleStatus bar: LEDs on moduleElectrical connections: all connections for loads according to IEC 61535Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 95 mm (assembled)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areas

Brand: Wieland Electric GmbHType: FLEX-0/2W DCPart No.: 83.020.0627.0

gesis® FLEX shutter output 2-fold DC incl. gesis® plugs

System gesis® FLEX - The 2-fold shutter output 24 V DC/3 A, with flat surface mounted housing which can be fitted on in DIN rail for decentralized installation, is managed by the base module. It receives the internal supply from the upstream module. The 24V supply is externally. The parameter set enables different automation functions. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation. All necessary plugs are enclosed.

Supply internal bus: via upstream moduleSupply mains: via upstream moduleNominal voltage: 230 V ACNumber: 2 shutter outputs (2-pole, up/down, polarity turn)Nominal voltage: 6…24 V DC (via external power supply)Nominal current: 3 A for each outputManual control: buttons on moduleStatus bar: LEDs on moduleElectrical connections: all connections for loads according to IEC 61535Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 95 mm (assembled)

Page 18/110


Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areasAccessories: needed plugs are part of the delivery

Brand: Wieland Electric GmbHType: FLEX-0/2W DC ZPart No.: 83.020.0627.1

gesis® FLEX fused shutter output 2-fold DC

System gesis® FLEX - The fused 2-fold shutter output 24 V DC/3 A, with flat surface mounted housing which can be fitted on in DIN rail for decentralized installation, is managed by the base module. It receives the internal supply from the upstream module. The 24 V supply is externally and fused with a 6.3 AT fine-wire-fuse. The parameter set enables different automation functions. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation.

Supply internal bus: via upstream moduleSupply mains: via upstream moduleFuse: 6.3 AT fine-wire-fuseNumber: 2 shutter outputs (2-pole, up/down, polarity turn)Nominal voltage: 6…24 V DC (via external power supply)Nominal current: 3 A for each outputManual control: buttons on moduleStatus bar: LEDs on moduleElectrical connections: all connections for loads according to IEC 61535Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 95 mm (assembled)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areas

Brand: Wieland Electric GmbHType: FLEX-0/2W DC FPart No.: 83.020.0637.0

gesis® FLEX fused shutter output 2-fold DC incl. gesis® plugs

System gesis® FLEX - The fused 2-fold shutter output 24 V DC/3 A, with flat surface mounted housing which can be fitted on in DIN rail for decentralized installation, is managed by the base module. It receives the internal supply from the upstream module. The 24 V supply is externally and fused with a 6.3 AT fine-wire-fuse. The parameter set enables different automation functions. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation. All necessary plugs are enclosed.

Supply internal bus: via upstream moduleSupply mains: via upstream moduleFuse: 6.3 AT fine-wire-fuseNumber: 2 shutter outputs (2-pole, up/down, polarity turn)Nominal voltage: 6…24 V DC (via external power supply)Nominal current: 3 A for each outputManual control: buttons on moduleStatus bar: LEDs on moduleElectrical connections: all connections for loads according to IEC 61535Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2

Page 19/110


Housing color: upper part light grey, lower part blackDimensions:Length: 95 mm (assembled)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areasAccessories: needed plugs are part of the delivery

Brand: Wieland Electric GmbHType: FLEX-0/2W DC F ZPart No.: 83.020.0637.1

gesis® KNX FLEX SMI Gateway

System gesis® FLEX - The 1-phase supplied KNX SMI Gateway with flat surface mounted housing which can be fitted on DIN rails for decentralized installation is able to control 8 SMI drives in 8 groups. The 5-pole output includes SMI +/- and L, N and earth. The extensive parameter set enables different automation functions. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation.

KNX supply:Supply: KNX system voltageNominal current: ca. 5 mAPower supply:Nominal voltage: 230 V ACNominal current: 16 AStatus bar: LEDs on moduleOutputs: 1 to control up to 8 SMI drives (5-pole, L, N, PE, I+, I-)Electrical connections: all connections for loads according to IEC 61535Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 130 mm (assembled)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areas

Brand: Wieland Electric GmbHType: KNX FLEX-0/8SMIPart No.: 83.020.0635.0

gesis® KNX FLEX SMI Gateway incl. gesis® plugs

System gesis® FLEX - The 1-phase supplied KNX SMI Gateway with flat surface mounted housing which can be fitted on DIN rails for decentralized installation is able to control 8 SMI drives in 8 groups. The 5-pole output includes SMI +/- and L, N and earth. The extensive parameter set enables different automation functions. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation. All necessary plugs are enclosed.

KNX supply:Supply: KNX system voltageNominal current: ca. 5 mAPower supply:Nominal voltage: 230 V ACNominal current: 16 AStatus bar: LEDs on moduleOutputs: 1 to control up to 8 SMI drives (5-pole, L, N, PE, I+, I-)Electrical connections: all connections for loads according to IEC 61535Protection class: IP20

Page 20/110


Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 130 mm (assembled)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areasAccessories: needed plugs are part of the delivery

Brand: Wieland Electric GmbHType: KNX FLEX-0/8SMI ZPart No.: 83.020.0635.1

Page 21/110


1.7 Semiconductor outputs

gesis® FLEX semiconductor output 4-fold AC

System gesis® FLEX - The 4-fold semiconductor output 230 V AC/0.5 A, with flat surface mounted housing which can be fitted on DIN rails for decentralized installation, is managed by the base module. It receives mains and bus supply from the upstream module. The extensive parameter set enables different automation functions. The manual operation level allows function tests without prior system integration. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation.

Supply internal bus: via upstream moduleSupply mains: via upstream moduleNominal voltage: 230 V ACNominal current: 0.5 A (ohmic load) per outputNumber: 4 semiconductor outputs (TRIAC)Manual control: buttons on moduleStatus bar: LEDs on moduleElectrical connections: all connections for loads according to IEC 61535Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 130 mm (assembled)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areas

Brand: Wieland Electric GmbHType: FLEX-0/4HL ACPart No.: 83.020.0631.0

gesis® FLEX semiconductor output 4-fold AC incl. gesis® plugs

System gesis® FLEX - The 4-fold semiconductor output 230 V AC/0.5 A, with flat surface mounted housing which can be fitted on DIN rails for decentralized installation, is managed by the base module. It receives mains and bus supply from the upstream module. The extensive parameter set enables different automation functions. The manual operation level allows function tests without prior system integration. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation. All necessary plugs are enclosed.

Supply internal bus: via upstream moduleSupply mains: via upstream moduleNominal voltage: 230 V ACNominal current: 0.5 A (ohmic load) per outputNumber: 4 semiconductor outputs (TRIAC)Manual control: buttons on moduleStatus bar: LEDs on moduleElectrical connections: all connections for loads according to IEC 61535Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 130 mm (assembled)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areasAccessories: needed plugs are part of the delivery


Page 22/110


Type: FLEX-0/4HL AC ZPart No.: 83.020.0631.1

gesis® FLEX fused semiconductor output 4-fold AC

System gesis® FLEX - The fused 4-fold semiconductor output 230 V AC/0.5 A, with flat surface mounted housing which can be fitted on DIN rails for decentralized installation, is managed by the base module. Each output is fused with a 0.5 AT fine-wire-fuse. It receives mains and bus supply from the upstream module. The extensive parameter set enables different automation functions. The manual operation level allows function tests without prior system integration. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation.

Supply internal bus: via upstream moduleSupply mains: via upstream moduleNominal voltage: 230 V ACNominal current: 0.5 A (ohmic load) per outputFuse: 0.5 AT fine-wire-fuse per outputNumber: 4 semiconductor outputs (TRIAC)Manual control: buttons on moduleStatus bar: LEDs on moduleElectrical connections: all connections for loads according to IEC 61535Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 130 mm (assembled)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areas

Brand: Wieland Electric GmbHType: FLEX-0/4HL AC FPart No.: 83.020.0632.0

gesis® FLEX fused semiconductor output 4-fold AC incl. gesis® plugs

System gesis® FLEX - The fused 4-fold semiconductor output 230 V AC/0.5 A, with flat surface mounted housing which can be fitted on DIN rails for decentralized installation, is managed by the base module. Each output is fused with a 0.5 AT fine-wire-fuse. It receives mains and bus supply from the upstream module. The extensive parameter set enables different automation functions. The manual operation level allows function tests without prior system integration. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation. All necessary plugs are enclosed.

Supply internal bus: via upstream moduleSupply mains: via upstream moduleNominal voltage: 230 V ACNominal current: 0.5 A (ohmic load) per outputFuse: 0.5 AT fine-wire-fuse per outputNumber: 4 semiconductor outputs (TRIAC)Manual control: buttons on moduleStatus bar: LEDs on moduleElectrical connections: all connections for loads according to IEC 61535Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 130 mm (assembled)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN rail

Page 23/110



Brand: Wieland Electric GmbHType: FLEX-0/4HL AC F ZPart No.: 83.020.0632.1

gesis® FLEX semiconductor output 4-fold DC

System gesis® FLEX - The 4-fold semiconductor output 24 V DC/0.5 A output, with flat surface mounted housing which can be fitted on DIN rails for decentralized installation, is managed by the base module. Each output is electronically fused. Bus and power supply are from the upstream module, the 24 V DC has to be fed separately. The extensive parameter set enables different automation functions. The manual operation level allows functional testing without prior system integration. The electrical connections are pluggable in accordance with IEC 61535, separate automation and installation.

Supply internal bus: via upstream moduleSupply mains: via upstream moduleNominal voltage: 24 V DCNominal current: 0.5 A (ohmic load) per outputFuse protection at device: Electronic overload recognition from > 0.7 ANumber: 4 semiconductor outputs (MOS FET)Manual control: buttons on moduleStatus bar: LEDs on moduleElectrical connections: all connections for loads according to IEC 61535Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 130 mm (assembled)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areas

Brand: Wieland Electric GmbHType: FLEX-0/4HL AC FPart No.: 83.020.0633.0

gesis® FLEX semiconductor output 4-fold DC incl. gesis® plugs

System gesis® FLEX - The 4-fold semiconductor output 24 V DC/0.5 A output, with flat surface mounted housing which can be fitted on DIN rails for decentralized installation, is managed by the base module. Each output is electronically fused. Bus and power supply are from the upstream module, the 24 V DC has to be fed separately. The extensive parameter set enables different automation functions. The manual operation level allows functional testing without prior system integration. The electrical connections are pluggable in accordance with IEC 61535, separate automation and installation. All necessary plugs are enclosed.

Supply internal bus: via upstream moduleSupply mains: via upstream moduleNominal voltage: 24 V DCNominal current: 0.5 A (ohmic load) per outputFuse protection at device: Electronic overload recognition from > 0.7 ANumber: 4 semiconductor outputs (MOS FET)Manual control: buttons on moduleStatus bar: LEDs on moduleElectrical connections: all connections for loads according to IEC 61535Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part black

Page 24/110


Dimensions:Length: 130 mm (assembled)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areasAccessories: needed plugs are part of the delivery

Brand: Wieland Electric GmbHType: FLEX-0/4HL AC F ZPart No.: 83.020.0633.1

Page 25/110


1.8 EnOcean Gateway

gesis® FLEX EnOcean Gateway 32-fold

System gesis® FLEX - The bidirectional gateway for 32 channels is an independent KNX device, the surface mounted housing can be fitted on DIN rails for decentralized installation. The device is based on the EnOcean Equipment Profiles (EEP). The software tool for commissioning is completed by a comfortable manual control using an LCD-display. The gateway additionally supports logical and control functions and includes a radio repeater. The KNX connection is pluggable.

Supply: KNX System voltageNominal current: ca. 12 mAEnOcean:Interface: ISM band 868,3 MHz, ASKRange: max. 100 mSupported devices: EEP Version 2.1External antenna with 5 m cable and magnet baseManual control: buttons on moduleStatus bar: LEDs on moduleDisplay: for system integration and diagnosisKNX connection according to KNX handbookProtection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 115 mm (127 mm incl. left and right end cap)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areasAccessories: needed end caps are part of the delivery

Brand: Wieland Electric GmbHType: FLEX-ENO32Part No.: 83.020.0628.0

gesis® FLEX EnOcean Gateway 32-fach incl. gesis® plugs

System gesis® FLEX - The bidirectional gateway for 32 channels is an independent KNX device, the surface mounted housing can be fitted on DIN rails for decentralized installation. The device is based on the EnOcean Equipment Profiles (EEP). The software tool for commissioning is completed by a comfortable manual control using an LCD-display. The gateway additionally supports logical and control functions and includes a radio repeater. The KNX connection is pluggable. All necessary plugs are enclosed.

Supply: KNX System voltageNominal current: ca. 12 mAEnOcean:Interface: ISM band 868,3 MHz, ASKRange: max. 100 mSupported devices: EEP Version 2.1External antenna with 5 m cable and magnet baseManual control: buttons on moduleStatus bar: LEDs on moduleDisplay: for system integration and diagnosisKNX connection according to KNX handbookProtection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 115 mm (127 mm incl. left and right end cap)

Page 26/110


Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areasAccessories: needed end caps as well as plugs are part of the delivery

Brand: Wieland Electric GmbHType: FLEX-ENO32 ZPart No.: 83.020.0628.1

Page 27/110


1.9 FanCoil Controller

gesis® KNX FLEX FanCoil controller

System gesis® FLEX - The 1-phase supplied FanCoil base module with flat surface mounted housing which can be fitted on DIN rails for decentralized installation controls one valve for cooling/heating pipes and an fan with three speed level. The function can be extended with an extension module. The extensive parameter set enables different automation functions. The manual operation level allows function tests without prior system integration. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation.

KNX supply:Supply: KNX system voltageNominal current: ca. 5 mAPower supply:Nominal voltage: 230 V ACNominal current: internal fuse 5 AValve connection:Supply: 24 V DC via internal supply (15 W)Execution: 2- or 3-pole for PWM or analog control, short-cut and overload protectedFan connection:Nominal voltage: 230 V ACFan stages: (0, 1, 2, 3)Manual control: buttons on moduleStatus bar: LEDs on moduleElectrical connections: all connections for loads according to IEC 61535Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 130 mm (assembled)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areas

Brand: Wieland Electric GmbHType: KNX FLEX-FCPart No.: 83.020.0638.0

gesis® KNX FLEX FanCoil controller incl. gesis® plugs

System gesis® FLEX - The 1-phase supplied FanCoil base module with flat surface mounted housing which can be fitted on DIN rails for decentralized installation controls one valve for cooling/heating pipes and an fan with three speed level. The function can be extended with an extension module. The extensive parameter set enables different automation functions. The manual operation level allows function tests without prior system integration. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation. All necessary plugs are enclosed.

KNX supply:Supply: KNX system voltageNominal current: ca. 5 mAPower supply:Nominal voltage: 230 V ACNominal current: internal fuse 5 AValve connection:Supply: 24 V DC via internal supply (15 W)Execution: 2- or 3-pole for PWM or analog control, short-cut and overload protectedFan connection:Nominal voltage: 230 V ACFan stages: (0, 1, 2, 3)

Page 28/110


Manual control: buttons on moduleStatus bar: LEDs on moduleElectrical connections: all connections for loads according to IEC 61535Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 130 mm (assembled)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areasAccessories: needed end caps as well as plugs are part of the delivery

Brand: Wieland Electric GmbHType: KNX FLEX-FC ZPart No.: 83.020.0638.1

gesis® FLEX FanCoil Extension

System gesis® FLEX - The extension module for the FanCoil base module with flat surface mounted housing which can be fitted on DIN rails for decentralized installation controls one valve for cooling/heating pipes and an relays. In addition it has one binary and one temperature sensor input. The extensive parameter set, commissioned in the base module, enables different automation functions. The manual operation level allows function tests without prior system integration. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation.

Supply internal bus: via upstream moduleSupply mains: via upstream moduleValve connection:Supply: 24 V DC via internal supply (15 W)Execution: 2- or 3-pole for PWM or analog control, short-cut and overload protectedRelay output:Nominal voltage: 230 V ACBinary input:Nominal voltage: 24 V DCTemperature sensor input: for NTCElectrical connections: all connections for loads according to IEC 61535Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 130 mm (assembled)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areas

Brand: Wieland Electric GmbHType: FLEX-FC EMPart No.: 83.020.0639.0

gesis® FLEX FanCoil Extension incl. gesis® plugs

System gesis® FLEX - The extension module for the FanCoil base module with flat surface mounted housing which can be fitted on DIN rails for decentralized installation controls one valve for cooling/heating pipes and an relays. In addition it has one binary and one temperature sensor input. The extensive parameter set, commissioned in the base module, enables different automation functions. The manual operation level allows function tests without prior system integration. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation. All necessary plugs are enclosed.

Page 29/110


Supply internal bus: via upstream moduleSupply mains: via upstream moduleValve connection:Supply: 24 V DC via internal supply (15 W)Execution: 2- or 3-pole for PWM or analog control, short-cut and overload protectedRelay output:Nominal voltage: 230 V ACBinary input:Nominal voltage: 24 V DCTemperature sensor input: for NTCElectrical connections: all connections for loads according to IEC 61535Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 130 mm (assembled)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areasAccessories: needed plugs are part of the delivery

Brand: Wieland Electric GmbHType: FLEX-FC EM ZPart No.: 83.020.0639.1

Page 30/110


1.10 System-compatible housings

gesis® FLEX system-compatible housing 4 MW

System gesis® FLEX - The system-compatible housing module for DIN rail surface mounting for decentralized installation can be used to install DIN rail mounted devices according to DIN 43880 with up to four module width. Mains and bus supply are passed from upstream to downstream module. Main supply can be internally gripped. Cable glands have to be yield on side.

Mounting possibility: DIN rail mounted device according to DIN 43880, 4 MW (72 mm)Supply KNX: externSupply mains: via upstream module, can be gripped internallyThrough wiring: Mains- and bus are passed from upstream to downstream moduleDimensions:Length: 130 mm (assembled)Width: approx. 140 mmHeight: 80 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areas

Brand: Wieland Electric GmbHType: FLEX-REG4Part No.: 83.020.0660.0

gesis® FLEX system-compatible housing 4 MW with cable glands

System gesis® FLEX - The system-compatible housing module for DIN rail surface mounting for decentralized installation can be used to install DIN rail mounted devices according to DIN 43880 with up to four module width. Mains and bus supply are passed from upstream to downstream module. Main supply can be internally gripped. The module comes with 3 cable glands.

Mounting possibility: DIN rail mounted device according to DIN 43880, 4 MW (72 mm)Supply KNX: externSupply mains: via upstream module, can be gripped internallyThrough wiring: Mains- and bus are passed from upstream to downstream moduleCable glands: 1x cable diameter 5-9 mm, 2x cable diameter 7-13 mmDimensions:Length: 130 mm (assembled)Width: approx. 173 mm (incl. cable glands)Height: 80 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areas

Brand: Wieland Electric GmbHType: FLEX-REG4 VPart No.: 83.020.0661.0

gesis® FLEX system-compatible housing 4 MW with clear cover

System gesis® FLEX - The system-compatible housing module for DIN rail surface mounting for decentralized installation can be used to install DIN rail mounted devices according to DIN 43880 with up to four module width. Mains and bus supply are passed from upstream to downstream module. Main supply can be internally gripped. Cable glands have to be yield on side. The module has a clear cover to protect the internal device.

Mounting possibility: DIN rail mounted device according to DIN 43880, 4 MW (72 mm)Supply KNX: externSupply mains: via upstream module, can be gripped internallyThrough wiring: Mains- and bus are passed from upstream to downstream moduleClear cover: for 4 MWDimensions:Length: 130 mm (assembled)

Page 31/110


Width: approx. 140 mmHeight: 94 mm without DIN rail (incl. clear cover)Mounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areas

Brand: Wieland Electric GmbHType: FLEX-REG4 DPart No.: 83.020.0662.0

gesis® FLEX system-compatible housing 4 MW with cable glands and clear cover

System gesis® FLEX - The system-compatible housing module for DIN rail surface mounting for decentralized installation can be used to install DIN rail mounted devices according to DIN 43880 with up to four module width. Mains and bus supply are passed from upstream to downstream module. Main supply can be internally gripped. The module comes with 3 cable glands and has a clear cover to protect the internal device.

Mounting possibility: DIN rail mounted device according to DIN 43880, 4 MW (72 mm)Supply KNX: externSupply mains: via upstream module, can be gripped internallyThrough wiring: Mains- and bus are passed from upstream to downstream moduleCable glands: 1x cable diameter 5-9 mm, 2x cable diameter 7-13 mmClear cover: for 4 MWDimensions:Length: 130 mm (assembled)Width: approx. 173 mm (incl. cable glands)Height: 94 mm without DIN rail (incl. clear cover)Mounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areas

Brand: Wieland Electric GmbHType: FLEX-REG4 DVPart No.: 83.020.0663.0

Page 32/110


1.11 Pre-assembled system-compatible housings

gesis® FLEX REG 24 V power supply DC

System gesis® FLEX REG - The power supply is used to supply 24 V DC consumers, the surface mounted housing can be fitted on DIN rails for decentralized installation. It is not suitable as a KNX power supply. It can be linked to the gesis® FLEX system. The module receives its power supply from an upstream gesis® FLEX module. The output is pluggable according to IEC 61535 and separates automation and installation.

Supply mains: via upstream module, gripped internallyThrough wiring: Mains- and bus are passed from upstream to downstream moduleElectrical connections: output according to IEC 61535Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 130 mm (assembled)Width: approx. 140 mmHeight: 80 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areas

Brand: Wieland Electric GmbHType: FLEX REG PS24-2.5Part No.: G0.000.0667.2

gesis® FLEX REG FI/LS

System gesis® FLEX REG - The RCCB/MCB combination with the flat cable tap for Wieland 10 mm ² flat cable is used for decentralized fuse, the surface mounted housing can be fitted on DIN rails for decentralized installation. It can be mechanically linked to the gesis® FLEX system and forwards gesis® FLEX bus and mains to downstream module. The fused output is pluggable according to IEC 61535 and separates automation and installation.

Supply mains: extern via flat cable adapter 10 mm² with 1 m connection cableSupply KNX: externThrough wiring: Mains- and bus are passed from upstream to downstream moduleElectrical connections: output according to IEC 61535Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 130 mm (assembled)Width: approx. 140 mmHeight: 80 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areas

Brand: Wieland Electric GmbHType: KNX FLEX REG FILSPart No.: G0.000.0667.3

Page 33/110


1.12 Extension cables

gesis® FLEX extension cable mains 0.5 m

System gesis® FLEX - An extension of the internal mains for the flat, DIN rail surface mounted system for decentralized installation is possible with up to 1.0 m. It interlocks automatically if it is plugged. Because of the mechanical coding main and bus supply cannot be mixed.

Length: 0.5 mNominal voltage: 230/400 V ACNominal current: 3x16 APlug-system: GST15i5 white

Brand: Wieland Electric GmbHType: GST15i5KS BS X15 V 05WSPart No.: 91.257.0500.2

gesis® FLEX extension cable mains 1.0 m

System gesis® FLEX - An extension of the internal mains for the flat, DIN rail surface mounted system for decentralized installation is possible with up to 1.0 m. It interlocks automatically if it is plugged. Because of the mechanical coding main and bus supply cannot be mixed.

Length: 1.0 mNominal voltage: 230/400 V ACNominal current: 3x16 APlug-system: GST15i5 white

Brand: Wieland Electric GmbHType: GST15i5KS BS X15 V 10WSPart No.: 91.257.1000.2

gesis® FLEX extension cable bus 0.5 m

System gesis® FLEX - An extension of the internal bus for the flat, DIN rail surface mounted system for decentralized installation is possible with up to 1.0 m. It interlocks automatically if it is plugged. Because of the mechanical coding main and bus supply cannot be mixed.

Length: 0.5 mNominal voltage: 50 VNominal current: 10 APlug-system: GST15i5 lighting blue

Brand: Wieland Electric GmbHType: GST15i5KS BSX05_V 05BL02Part No.: 99.400.9999.8

gesis® FLEX extension cable bus 1.0 m

System gesis® FLEX - An extension of the internal bus for the flat, DIN rail surface mounted system for decentralized installation is possible with up to 1.0 m. It interlocks automatically if it is plugged. Because of the mechanical coding main and bus supply cannot be mixed.

Length: 1.0 mNominal voltage: 50 VNominal current: 10 APlug-system: GST15i5 lighting blue

Page 34/110


Brand: Wieland Electric GmbHType: GST15i5KS BSX05_V 10BL02Part No.: 99.401.9999.8

Page 35/110


1.13 Accessories

gesis® FLEX power supply 24 V DC/30 W

System gesis® FLEX - The power supply 24 V DC/30 W with flat surface mounted housing which can be fitted on DIN rails for decentralized installation and added to the system. It receives mains from the upstream module and supplies the following modules with mains and the internal bus. The output is wired parallel to three 2-pole connectors. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation.

Supply internal bus: via upstream moduleSupply mains: via upstream moduleNominal voltage: 230 V ACStandby power: 0.3 WOutput voltage: 24 V DC +/- 2.5 %Output current max.: 1.25 AOutput power: 30 W at Tu 30°C; 20 W at Tu 45 °CShort-circuit/overload protection: cutout from > 33 W min.; 50 W max.Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 95 mm (assembled)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areas

Brand: Wieland Electric GmbHType: FLEX-PS 24/30Part No.: 83.020.0640.0

gesis® FLEX gesis® FLEX power supply 24 V DC/30 W incl. gesis® plugs

System gesis® FLEX - The power supply 24 V DC/30 W with flat surface mounted housing which can be fitted on DIN rails for decentralized installation and added to the system. It receives mains from the upstream module and supplies the following modules with mains and the internal bus. The output is wired parallel to three 2-pole connectors. The electrical connections, which are pluggable in accordance with IEC 61535, separate automation and installation. All necessary plugs are enclosed.

Supply internal bus: via upstream moduleSupply mains: via upstream moduleNominal voltage: 230 V ACStandby power: 0.3 WOutput voltage: 24 V DC +/- 2.5 %Output current max.: 1.25 AOutput power: 30 W at Tu 30°C; 20 W at Tu 45 °CShort-circuit/overload protection: cutout from > 33 W min.; 50 W max.Protection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 95 mm (assembled)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areasAccessories: needed plugs are part of the delivery

Brand: Wieland Electric GmbHType: FLEX-PS 24/30 Z

Page 36/110


Part No.: 83.020.0640.1

gesis® FLEX mounting frame 40 cm

System gesis® FLEX - The fit-up aid for the flat, DIN rail surface mounted system for decentralized installation alleviates the mounting to cable trays, in suspended ceilings or raised floors. It grabs different numbers of modules according to its length and comes with a fixing possibility for connected cables. The hole pattern and incl. screws enable a quick mounting.

Length: 40 cmDIN rail: TH35x7.5Locking holes: round-, long- and keyholeFixing material: roundhead and hook screw for cable trays are part of the delivery

Brand: Wieland Electric GmbHType: MB TH35-7,5 HK 40x20 ZPart No.: Z5.524.1410.0











Length: 70 cm

Page 37/110


DIN rail: TH35x7.5Locking holes: round-, long- and keyholeFixing material: roundhead and hook screw for cable trays are part of the delivery














gesis® Y-conductor for DALI applications 0,5 m

Page 38/110


System gesis® - The Y-conductor for DALI applications allows the DALI signal and the mains supply to be fed separately into a common connector. The further light wiring is then performed via the common connector system.

Length: 0.5 mNominal voltage: 230 VNominal current: 16 ADALI male connector: GST15i2 pastel blue, Code 2, D1 / D2Mains male connector: GST18i3 black, Code 1, L / PE / NDALI+mains female connector: GST18i5 pastel blue, Code 2, L / N / PE / D1 / D2Halogen free: no

Brand: Wieland Electric GmbHType: GST1xi5 BSS 05PBPart No.: 99.404.9999.8

gesis® Y-conductor for DALI applications 0,5 m, halogen free

System gesis® - The Y-conductor for DALI applications allows the DALI signal and the mains supply to be fed separately into a common connector. The further light wiring is then performed via the common connector system.

Length: 0.5 mNominal voltage: 230 VNominal current: 16 ADALI male connector: GST15i2 pastel blue, Code 2, D1 / D2Mains male connector: GST18i3 black, Code 1, L / PE / NDALI+mains female connector: GST18i5 pastel blue, Code 2, L / N / PE / D1 / D2Halogen free: yes

Brand: Wieland Electric GmbHType: GST1xi5 BSS H 05PBPart No.: 99.405.9999.8

gesis® FLEX Covers

System gesis® FLEX - The covers serve to close gesis® FLEX devices or device arrangements on the left and right sides. They are included with base modules. If, for example, a gesis® FLEX housing is operated in isolation or only via feed-in Module, we recommend the use of protective caps. The set includes both covers.

Brand: Wieland Electric GmbHType: FLEX ABD LRPart No.: 99.061.9999.9

Page 39/110


2 gesis® EIB RM – Modular KNX building automation system

Modular KNX system for mounting in decentral distribution boxes. Applications: Lighting, shutter as well as electro thermal valves control and gathering potential-free or radio-based signals.The modularity offers a flexible combination of in- and outputs with only one physical address. Therefore the gesis RM system can be optimized to a perfect solution for each project.More complex applications can be realized through the extensive software equipment. The devices are built into distribution boxes and wired to gesis® connectors. The distribution boxes are individually manufactured according to customer requirements and meet their needs in the electronic equipment, the number and type of pluggable connections and also in the dimensions with a minimum height of 55 mm.

2.1 Base module

gesis® EIB RM base module

System gesis® RM - The KNX base module can manage up to four system compatible extension modules. It can be fixed on a DIN rail and has to be assembled in a distribution box for decentralized installation. Thereare input, switching, sunblind, switch/dim, DALI and semiconductor extension modules available. Because of the variety of extension modules a lot of room automation features can be fulfilled.

KNX supply:Nominal voltage: KNX system voltageNominal current: <5 mAMain supply:Nominal voltage: 12 V DCNominal current: 160 mAElectrical connections: screw-type terminalsOutputs:4 connections for extension modulesConnections: pluggable ribbon cableType of protection: IP00Mounting method: mounting rail TH35Housing: black, halogen-freeDimension in mm: 100x49x51 (HxWxD), width approx. 2.7 MW

Brand: Wieland Electric GmbHType: EIB RM2-BASPart No.: 83.020.0400.3

Page 40/110


2.2 Power supplies

gesis® RM power supply 0,16 A

System gesis® RM - The power supply (SELV) has a nominal current of 160 mA. It can be fixed on a DIN rail and has to be assembled in a distribution box for decentralized installation. It is used to power the system compatible base modules or other devices. All electrical connections are screw terminated.

Main supply:Nominal voltage: 230 V ACOutput:Nominal voltage: 12 V DC, SELVNominal current: 160 mAType of protection: IP00Mounting method: mounting rail TH35Housing: black, halogen-freeDimension in mm: 100x49x51 (HxWxD), width approx. 2.7 MW

Brand: Wieland Electric GmbHType: RM-PSPart No.: 83.020.0401.0

gesis® RM power supply 0,4 A

System gesis® RM - The low loss power supply (SELV) has a nominal current of 400mA. It can be fixed on a DIN rail and has to be assembled in a distribution box for decentralized installation. It is used to power the system compatible base modules or other devices. All electrical connections are screw terminated.

Main supply:Nominal voltage: 230 V ACOutput:Nominal voltage: 12 V DC, SELVNominal current: 400 mAType of protection: IP00Mounting method: mounting rail TH35Housing: black, halogen-freeDimension in mm: 100x49x51 (HxWxD), width approx. 2.7 MW

Brand: Wieland Electric GmbHType: RM-PS 12/5Part No.: 83.020.0421.0

Page 41/110


2.3 Binary input

gesis® RM binary input 8-fold

System gesis® RM - The extension module has 8 inputs and will be managed by a system compatible base module. It can be fixed on a DIN rail and has to be assembled in a distribution box for decentralized installation. The binary inputs are connected to potential free contacts like installation switches. They can be configured to fulfill different functions within the building automation system. The scanning voltage is provided by the module.

Main supply:Nominal voltage: 230 V ACConnection to base module: ribbon cable, included in deliveryInputs: 8Type: for potential-free contactsScanning voltage: 12 V, made in moduleType of protection: IP00Mounting method: mounting rail TH35Housing: black, halogen-freeDimension in mm: 100x49x51 (HxWxD), width approx. 2.7 MW

Brand: Wieland Electric GmbHType: RM-8/0 (12)Part No.: 83.020.0402.0

Page 42/110


2.4 Switching output

gesis® RM switching output 4-fold

System gesis® RM - The extension module has 4 outputs and will be managed by a system compatible base module. It can be fixed on a DIN rail and has to be assembled in a distribution box for decentralized installation. The outputs are potential free, galvanized and are separately and independently controllable.

Outputs:4 switching outputs, potential-freeNominal voltage: 230 V AC, 50...60 HzNominal current: 16 A ohmic loadConnection to base module: ribbon cable, included in deliveryType of protection: IP00Mounting method: mounting rail TH35Housing: black, halogen-freeDimension in mm: 100x49x51 (HxWxD), width approx. 2.7 MW

Brand: Wieland Electric GmbHType: RM-0/4Part No.: 83.020.0403.0

Page 43/110


2.5 Sunblind outputs

gesis® RM sunblind output 2-fold, 230 V

System gesis® RM - The extension module has 2 sunblind outputs, automated drive time measurement and will be managed by a system compatible base module. It can be fixed on a DIN rail and has to be assembled in a distribution box for decentralized installation. The outputs can control 230 V motors for two directions of rotation. The outputs have one common micro-fuse but are separately and independently controlled.

Outputs:2 Sunblind outputsNominal voltage: 230 V AC, 50...60 HzNominal current: 5 A jointFuse: 5 AT micro-fuseConnection to base module: ribbon cable, included in deliveryType of protection: IP00Mounting method: mounting rail TH35Housing: black, halogen-freeDimension in mm: 100x49x51 (HxWxD), width approx. 2.7 MW

Brand: Wieland Electric GmbHType: RM-0/2W SIPart No.: 83.020.0404.0

gesis® RM sunblind output 2-fold, 24 V

System gesis® RM - The extension module has 2 sunblind outputs, automated drive time measurement and will be managed by a system compatible base module. It can be fixed on a DIN rail and has to be assembled in a distribution box for decentralized installation. The outputs can control 24 V motors for two directions of rotation. The outputs have one common micro-fuse but are separately and independently controlled.

Outputs:2 Sunblind outputsNominal voltage: 24 V DCNominal current: 5 A jointFuse: 5 AT micro-fuseConnection to base module: ribbon cable, included in deliveryType of protection: IP00Mounting method: mounting rail TH35Housing: black, halogen-freeDimension in mm: 100x49x51 (HxWxD), width approx. 2.7 MW

Brand: Wieland Electric GmbHType: RM-0/2W DCPart No.: 83.020.0407.0

Page 44/110


2.6 Dimming outputs

gesis® RM switch/dim output 2-fold

System gesis® RM - The extension module has 2 switch/dim outputs and will be managed by a system compatible base module. It can be fixed on a DIN rail and has to be assembled in a distribution box for decentralized installation. The separated outputs are able to control dynamic electronic ballasts with 1-10V interface.

Main supply:Nominal voltage: 230 V ACNominal current: 1 6AOutputs:Count: 2 switch/dim outputsNominal voltage mains: 230 V AC, 50...60 HzNominal current mains: 16 A ohmic loadNominal voltage signal: 1-10VNominal current signal: maximal 50 mA (passive)Connection to base module: ribbon cable, included in deliveryType of protection: IP00Mounting method: mounting rail TH35Housing: black, halogen-freeDimension in mm: 100x49x51 (HxWxD), width approx. 2.7 MW

Brand: Wieland Electric GmbHType: RM-0/2SDPart No.: 83.020.0405.0

gesis® RM universal dimming output 2-fold

System gesis® RM - The extension module has 2x 250 VA universal dimming outputs, and will be managed by a system compatible base module. It can be fixed on a DIN rail and has to be assembled in a distribution box for decentralized installation. The separated outputs can scan the type of load (resistive, capacitive or inductive) and adjust the necessary dimming behavior. Each channel is able to handle a load up to 250 VA.

Outputs:2 universal dimming outputsNominal voltage: 0-230 V AC, 50...60 HzOutput load: 30-250 VALoad type: R, L, C,Connection to base module: ribbon cable, included in deliveryType of protection: IP00Mounting method: mounting rail TH35Housing: black, halogen-freeDimension in mm: 100x49x51 (HxWxD), width approx. 2.7 MW

Brand: Wieland Electric GmbHType: RM-0/2DPart No.: 83.020.0409.0

gesis® RM DALI output 2-fold

System gesis® RM - The extension module has 2x DALI outputs and will be managed by a system compatible base module. It can be fixed on a DIN rail and has to be assembled in a distribution box for decentralized installation. Each DALI channel is working as a master and can handle up to eight DALI ballast's, using the broadcast mode. The DALI error message will be transferred as a collective report to the base module

Outputs:2 DALI channels

Page 45/110


Nominal voltage: DALI system voltage (approx. 16 V)Output load: max. 8 DALI ballast'sConnection to base module: ribbon cable, included in deliveryType of protection: IP00Mounting method: mounting rail TH35Housing: black, halogen-freeDimension in mm: 100x49x51 (HxWxD), width approx. 2.7 MW

Brand: Wieland Electric GmbHType: RM-0/2DAPart No.: 83.020.0410.0

Page 46/110


2.7 Semiconductor outputs

gesis® RM semiconductor output 4-fold, AC/DC

System gesis® RM - The extension module has 4 wide range semiconductor outputs and will be managed by a system compatible base module. It can be fixed on a DIN rail and has to be assembled in a distribution box for decentralized installation. The outputs can be used for example, as 2-level valve control. The input voltage can be from 24 to 230V.

Outputs:4 semiconductor switchesNominal voltage: 230 V AC or 24 V DCNominal current: 0.5 A each output, short-cut-proofConnection to base module: ribbon cable, included in deliveryType of protection: IP00Mounting method: mounting rail TH35Housing: black, halogen-freeDimension in mm: 100x49x51 (HxWxD), width approx. 2.7 MW

Brand: Wieland Electric GmbHType: RM-0/4 HLPart No.: 83.020.0406.0

gesis® RM semiconductor output 4-fold, AC

System gesis® RM - The extension module has 4 semiconductor outputs 230V AC and will be managed by a system compatible base module. It can be fixed on a DIN rail and has to be assembled in a distribution box for decentralized installation. The outputs can be used for example, as 2-level valve control. The input voltage can be from 12 to 230V AC.

Outputs:4 semiconductor switchesNominal voltage: 230 V AC (min. 12 V max. 253 V AC)Nominal current: 0.5 AConnection to base module: ribbon cable, included in deliveryType of protection: IP00Mounting method: mounting rail TH35Housing: black, halogen-freeDimension in mm: 100x49x51 (HxWxD), width approx. 2.7 MW

Brand: Wieland Electric GmbHType: RM-0/4 HL ACPart No.: 83.020.0411.0

gesis® RM semiconductor output 4-fold, DC

System gesis® RM - The extension module has 4 semiconductor outputs 24V DC and will be managed by a system compatible base module. It can be fixed on a DIN rail and has to be assembled in a distribution box for decentralized installation. The outputs can be used for example, as 2-level valve control. The input voltage can be from 12 to 45V AC.

Outputs:4 semiconductor switchesNominal voltage: 24 V DC (min.12 V max. 45 V DC)Nominal current: 0.5 AConnection to base module: ribbon cable, included in deliveryType of protection: IP00Mounting method: mounting rail TH35Housing: black, halogen-freeDimension in mm: 100x49x51 (HxWxD), width approx. 2.7 MW

Page 47/110


Brand: Wieland Electric GmbHType: RM-0/4 HL DCPart No.: 83.020.0412.0

Page 48/110


2.8 Radio controlled input

gesis® RM radio controlled input 2x8-fold

System gesis® RM - The extension module has 16 radio controlled inputs and will be managed by a system compatible base module. It can be fixed on a DIN rail and has to be assembled in a distribution box for decentralized installation. The input can map 170 radio channels to 16 input channels. The allocation of the radio channels to the input channels will be done at the module.

Main supply: via connection to base moduleConnection to base module: ribbon cable, included in deliveryInputs: 16 in two groups, 8 eachReceiving frequency: 868.3 MHzAntenna terminal: SMA femaleTransmission protocol: EnOceanType of protection: IP00Mounting method: mounting rail TH35Housing: black, halogen-freeDimension in mm: 100x49x51 (HxWxD), width approx. 2.7 MW

Brand: Wieland Electric GmbHType: RM-16/0 (RC)Part No.: 83.020.0408.0

Page 49/110


2.9 Accessories

gesis® RC antenna 868 MHz SMA male

System gesis® RC - The antenna with SMA socket is for 868 MHz nominal frequency. The black antenna can be mounted using a magnetic foot and has a 2.5 m connection cable.

Transmission frequency: 868.3 MHzConnection: SMA angle male plugCable length: 2.5 mMounting: magnet baseDimension: 28.5 mm base diameter, 117 mm antenna heightColor: black

Brand: Wieland Electric GmbHType: RC A-A1SWL25Part No.: 83.020.0503.0

Page 50/110


3 gesis® EIB V – Flat, direct pluggable KNX building automation system

The gesis® EIB V series is directly ready for use without wiring work and characterized by its particularly flat design and direct connectivity to the 7-pole flat cable system. The installation is completed locally in suspended ceilings or elevated floors, without installing an additional housing. All electrical connections are pluggable.

3.1 Switching outputs

gesis® EIB V switching output 4-fold, 3-phase

System gesis® EIB V - The switching output features a very low profile, has a three phase mains supply and four outputs. No additional housings are required for mounting e.g. in suspended ceilings or false floors. It features an option for direct connection to the flat cable. All electrical connections are pluggable.

KNX supply:Nominal voltage: KNX system voltageNominal current: <5 mAMain supply:Nominal voltage: 230/400 V AC, 3~Nominal current: each phase 16 AOutputs:Count: 4Nominal voltage: 230 V AC, 50...60 HzNominal current: 16 A ohmic loadElectrical connections: all pluggableMounting: on-wallType of protection: IP20Housing: halogen-freeFire behavior: UL 94-V-2Housing color: light gray RAL 7035Dimension in mm: 32x112x254 (HxWxL)

Brand: Wieland Electric GmbHType: EIB V-0/4BPart No.: 83.020.0225.0

gesis® EIB V Switching output 4-fold, 1-phase

System gesis® EIB V - The switching output features a very low profile, has a one phase mains supply and four outputs. No additional housings are required for mounting e.g. in suspended ceilings or false floors. It features an option for direct connection to the flat cable. All electrical connections are pluggable.

KNX supply:Nominal voltage: KNX system voltageNominal current: <5 mAMain supply:Nominal voltage: 230/400 V AC, 1~Nominal current: 16 AOutputs:Count: 4Nominal voltage: 230 V AC, 50...60 HzNominal current: 16 A ohmic loadElectrical connections: all pluggableMounting: on-wallType of protection: IP20Housing: halogen-freeFire behavior: UL 94-V-2Housing color: light gray RAL 7035Dimension in mm: 32x112x254 (HxWxL)

Page 51/110


Brand: Wieland Electric GmbHType: EIB V-0/4B SPPart No.: 83.020.0225.4

gesis® EIB V Switching output 6-fold, 3-phase

System gesis® EIB V - The switching output features a very low profile, has a three phase mains supply and six outputs. No additional housings are required for mounting e.g. in suspended ceilings or false floors. It features an option for direct connection to the flat cable. All electrical connections are pluggable.


Brand: Wieland Electric GmbHType: EIB V-0/6Part No.: 83.020.0214.0

Page 52/110


3.2 Sunblind outputs

gesis® EIB V sunblind output 2-fold, 3-phase

System gesis® EIB V - The sunblind output for shutter automation features a very low profile, has a three phase mains supply and two sunblind outputs. The software allows very comfortable and energy saving shutter automation. No additional housings are required for mounting e.g. in suspended ceilings or false floors. It features an option for direct connection to the flat cable. All electrical connections are pluggable.


Brand: Wieland Electric GmbHType: EIB V-0/2W BPart No.: 83.020.0221.0

gesis® EIB V sunblind output 2-fold, 1-phase

System gesis® EIB V - The sunblind output for shutter automation features a very low profile, has a one phase mains supply and two sunblind outputs. The software allows very comfortable and energy saving shutter automation. No additional housings are required for mounting e.g. in suspended ceilings or false floors. It features an option for direct connection to the flat cable. All electrical connections are pluggable.

KNX supply:Nominal voltage: KNX system voltageNominal current: <5 mAMain supply:Nominal voltage: 230/400 V AC, 1~Nominal current: 16 AOutputs:Count: 2Nominal voltage: 230 V AC, 50...60 HzNominal current: 16 A ohmic loadElectrical connections: all pluggableMounting: on-wallType of protection: IP20Housing: halogen-freeFire behavior: UL 94-V-2Housing color: light gray RAL 7035Dimension in mm: 32x112x254 (HxWxL)

Brand: Wieland Electric GmbHType: EIB V-0/2W B SPPart No.: 83.020.0221.4

Page 53/110


gesis® EIB V sunblind output 2-fold, 1-phase, internal fuse

System gesis® EIB V - The sunblind output for shutter automation features a very low profile, has a one phase mains supply and two sunblind outputs. Both outputs are shared fused with a 5 AT fine-wire-fuse. The software allows very comfortable and energy saving shutter automation. No additional housings are required for mounting e.g. in suspended ceilings or false floors. It features an option for direct connection to the flat cable. All electrical connections are pluggable.

KNX supply:Nominal voltage: KNX system voltageNominal current: <5 mAMain supply:Nominal voltage: 230/400 V AC, 1~Nominal current: 16 AFuse: 5 AT fine-wire-fuse common for both outputsOutputs:Count: 2Nominal voltage: 230 V AC, 50...60 HzNominal current: 16 A ohmic loadElectrical connections: all pluggableMounting: on-wallType of protection: IP20Housing: halogen-freeFire behavior: UL 94-V-2Housing color: light gray RAL 7035Dimension in mm: 32x112x254 (HxWxL)

Brand: Wieland Electric GmbHType: EIB V-0/2W F SPPart No.: 83.020.0222.4

Page 54/110


3.3 Combined actuators

gesis® EIB V combined actuator 2-fold Switching output, 1-fold Jalousieausgang, 3-phase

System gesis® EIB V - The combined output features a very low profile, has a three phase mains supply, two switching and one sunblind output. No additional housings are required for mounting e.g. in suspended ceilings or false floors. It features an option for direct connection to the flat cable. All electrical connections are pluggable.

KNX supply:Nominal voltage: KNX system voltageNominal current: <5 mAMain supply:Nominal voltage: 230/400 V AC, 3~Nominal current: each phase 16 AOutputs:Count: 2 Switching outputsNominal voltage: 230 V AC, 50...60 HzNominal current: 16 A ohmic loadCount: 1 JalousieausgangNominal voltage: 230 V AC, 50...60HzNominal current: 8 A ohmic loadElectrical connections: all pluggableMounting: on-wallType of protection: IP20Housing: halogen-freeFire behavior: UL 94-V-2Housing color: light gray RAL 7035Dimension in mm: 32x112x254 (HxWxL)

Brand: Wieland Electric GmbHType: EIB V-0/2+1WPart No.: 83.020.0212.0

gesis® EIB V combined actuator 2-fold Switching output, 1-fold Jalousieausgang, 1-phase

System gesis® EIB V - The combined output features a very low profile, has a one phase mains supply, two switching and one sunblind output. No additional housings are required for mounting e.g. in suspended ceilings or false floors. It features an option for direct connection to the flat cable. All electrical connections are pluggable.

KNX supply:Nominal voltage: KNX system voltageNominal current: <5 mAMain supply:Nominal voltage: 230/400 V AC, 1~Nominal current: 16 AOutputs:Count: 2 Switching outputsNominal voltage: 230 V AC, 50...60 HzNominal current: 16 A ohmic loadCount: 1 JalousieausgangNominal voltage: 230 V AC, 50...60HzNominal current: 8 A ohmic loadElectrical connections: all pluggableMounting: on-wallType of protection: IP20Housing: halogen-freeFire behavior: UL 94-V-2Housing color: light gray RAL 7035Dimension in mm: 32x112x254 (HxWxL)

Page 55/110


Brand: Wieland Electric GmbHType: EIB V-0/2+1W SPPart No.: 83.020.0212.4

Page 56/110


3.4 Switch/dim outputs

gesis® EIB V Switch/dim output 2-fold, 3-phase

System gesis® EIB V - The switch/dim output features a very low profile, has a three phase mains supply and two outputs for signal dimming 1-10V with switched 230V. No additional housings are required for mounting e.g. in suspended ceilings or false floors. It features an option for direct connection to the flat cable. All electrical connections are pluggable.

KNX supply:Nominal voltage: KNX system voltageNominal current: <5 mAMain supply:Nominal voltage: 230/400 V AC, 3~Nominal current: each phase 16 AOutputs:Count: 2Nominal voltage: 230 V AC, 50...60 HzNominal current: 16 A ohmic loadNominal voltage signal: 1-10 VElectrical connections: all pluggableMounting: on-wallType of protection: IP20Housing: halogen-freeFire behavior: UL 94-V-2Housing color: light gray RAL 7035Dimension in mm: 32x112x254 (HxWxL)

Brand: Wieland Electric GmbHType: EIB V-0/2SDPart No.: 83.020.0213.0

gesis® EIB V Switch/dim output 2-fold, 1-phase

System gesis® EIB V - The switch/dim output features a very low profile, has a one phase mains supply and two outputs for signal dimming 1-10V with switched 230V. No additional housings are required for mounting e.g. in suspended ceilings or false floors. It features an option for direct connection to the flat cable. All electrical connections are pluggable.

KNX supply:Nominal voltage: KNX system voltageNominal current: <5 mAMain supply:Nominal voltage: 230/400 V AC, 1~Nominal current: 16 AOutputs:Count: 2Nominal voltage: 230 V AC, 50...60 HzNominal current: 16 A ohmic loadNominal voltage signal: 1-10 VElectrical connections: all pluggableMounting: on-wallType of protection: IP20Housing: halogen-freeFire behavior: UL 94-V-2Housing color: light gray RAL 7035Dimension in mm: 32x112x254 (HxWxL)

Brand: Wieland Electric GmbHType: EIB V-0/2SD SPPart No.: 83.020.0213.4

Page 57/110


Page 58/110


4 gesis® KNX – System components and room automation

The Wieland gesis® KNX series implies products for the KNX topology as well as products for a complete room automation with KNX.

4.1 Presence and motion sensors

gesis® KNX presence detector PSU

System gesis® KNX - The presence detector for ceiling mounting with integrated bus coupling and mixed light measurement has a quadratic detection range (360°). He disposes two/three outputs for controlling light groups, constant light control or switching, and two presence outputs for HLK control.

Main supply:Nominal voltage: KNX system voltageBus coupling: integratedConnection: spring clamp terminalDetection area:Angle: horizontal 360°, vertical 120°Detection area walking person:64 m², 8.0x8.0 ± 1.0 m at mounting height 3.5 m49 m², 7.0x7.0 ± 1.0 m at mounting height 3.0 m36 m², 6.0x6.0 ± 0.5 m at mounting height 2.5 m20 m², 4.5x4.5 ± 0.5 m at mounting height 2.0 mDetection area sitting person:25 m², 5.0x5.0 m at mounting height 3.0 m16 m², 4.0x4.0 m at mounting height 2.5 m9 m², 3.0x3.0 m at mounting height 2.0 mMixed light measurement: 5…3000 lxMounting: flush-mounted socket, diameter 72 mm (bore hole 73 mm)Type of protection: IP20 (in installed state IP40)Housing color: whiteDimension (visible) in mm: 110x37 (DxH)

Brand: Wieland Electric GmbHType: KNX P PSUPart No.: F0.000.0034.5

gesis® KNX presence detector PPU

System gesis® KNX - The presence detector for ceiling mounting with integrated bus coupling and mixed light measurement has a quadratic detection range (360°) and is suitable for high premises. He disposes two/three outputs for controlling light groups, constant light control or switching, and two presence outputs for HLK control.

Main supply:Nominal voltage: KNX system voltageBus coupling: integratedConnection: spring clamp terminalDetection area:Angle: horizontal 360°, vertical 120°Detection area walking person:400 m², 20.0x20.0 ± 1.0 m at mounting height 10 m144 m², 12.0x12.0 ± 1.0 m at mounting height 5.0 m100 m², 10.0x10.0 ± 1.0 m at mounting height 3.5 m81 m², 9.0x9.0 ± 1.0 m at mounting height 3.0 m64 m², 8.0x8.0 ± 0.5 m at mounting height 2.5 m36 m², 6.0x6.0 ± 0.5 m at mounting height 2.0 mDetection area sitting person:64 m², 8.0x8.0 m at mounting height 3.5 m

Page 59/110


49 m², 7.0x7.0 m at mounting height 3.0 m36 m², 6.0x6.0 m at mounting height 2.5 m20 m², 4.5x4.5 m at mounting height 2.0 mMixed light measurement: 5…3000 lxMounting: flush-mounted socket, diameter 72 mm (bore hole 73 mm)Type of protection: IP20 (in installed state IP40)Housing color: whiteDimension (visible) in mm: 110x37 (DxH)

Brand: Wieland Electric GmbHType: KNX P PPUPart No.: F0.000.0034.6

gesis® KNX presence detector RPU

System gesis® KNX - The presence detector for ceiling mounting with integrated bus coupling and mixed light measurement has a round detection range (360°) and is suitable for high premises. He disposes two outputs for controlling light groups, constant light control or switching, and two presence outputs for HLK control.

Main supply:Nominal voltage: KNX system voltageBus coupling: integratedConnection: spring clamp terminalDetection area:Angle: horizontal 360°Detection area walking person:452 m², 24.0 m diameter at mounting height 6.0 m452 m², 24.0 m diameter at mounting height 3.5 m452 m², 24.0 m diameter at mounting height 3.0 m415 m², 23.0 m diameter at mounting height 2.5 m380 m², 22.0 m diameter at mounting height 2.0 mDetection area sitting person:50 m², 8.0 m diameter at mounting height 6.0 m50 m², 8.0 m diameter at mounting height 3.5 m50 m², 8.0 m diameter at mounting height 3.0 m38 m², 7.0 m diameter at mounting height 2.5 m28 m², 6.0 m diameter at mounting height 2.0 mMixed light measurement: 30…3000 lxMounting: flush-mounted socket, diameter 72 mm (bore hole 73 mm)Type of protection: IP20 (in installed state IP40)Housing color: whiteDimension (visible) in mm: 110x46 (DxH)

Brand: Wieland Electric GmbHType: KNX P RPUPart No.: F0.000.0034.7

gesis® KNX motion detector MSD

System gesis® KNX - The motion detector for ceiling mounting with integrated bus coupling and mixed light measurement has a round detection range (360°). He disposes a brightness depending output to control light groups and one presence output for HLK control.

Main supply:Nominal voltage: KNX system voltageBus coupling: integratedConnection: spring clamp terminalDetection area:Angle: horizontal 360°Detection area walking person:

Page 60/110


64 m², 9.0 m diameter at mounting height 4.0 m50 m², 8.0 m diameter at mounting height 3.5 m50 m², 8.0 m diameter at mounting height 3.0 m38 m², 7.0 m diameter at mounting height 2.5 m38 m², 7.0 m diameter at mounting height 2.0 mDetection area sitting person:13 m², 4.0 m diameter at mounting height 4.0 m13 m², 4.0 m diameter at mounting height 3.5 m13 m², 4.0 m diameter at mounting height 3.0 m7 m², 3.0 m diameter at mounting height 2.5 m5 m², 2.5 m diameter at mounting height 2.0 mMixed light measurement: 30…3000 lxMounting: in ceiling outcut with 62 - 70 mm diameterType of protection: IP20 (in installed state IP40)Housing color: whiteDimension (visible) in mm: 74x23 (DxH)

Brand: Wieland Electric GmbHType: KNX M MSDPart No.: F0.000.0034.8

gesis® KNX motion detector MPU

System gesis® KNX - The motion detector for ceiling mounting with integrated bus coupling and mixed light measurement has a round detection range (360°) and is suitable for high premises. He disposes a brightness depending output to control light groups and one presence output for HLK control.

Main supply:Nominal voltage: KNX system voltageBus coupling: integratedConnection: spring clamp terminalDetection area:Angle: horizontal 360°Detection area walking person:452 m², 24.0 m diameter at mounting height 6.0 m452 m², 24.0 m diameter at mounting height 3.5 m452 m², 24.0 m diameter at mounting height 3.0 m415 m², 23.0 m diameter at mounting height 2.5 m380 m², 22.0 m diameter at mounting height 2.0 mDetection area sitting person:50 m², 8.0 m diameter at mounting height 6.0 m50 m², 8.0 m diameter at mounting height 3.5 m50 m², 8.0 m diameter at mounting height 3.0 m38 m², 7.0 m diameter at mounting height 2.5 m28 m², 6.0 m diameter at mounting height 2.0 mMixed light measurement: 30…3000 lxMounting: flush-mounted socket, diameter 72 mm (bore hole 73 mm)Type of protection: IP20 (in installed state IP40)Housing color: whiteDimension (visible) in mm: 110x46 (DxH)

Brand: Wieland Electric GmbHType: KNX M MPUPart No.: F0.000.0034.9

Page 61/110


4.2 Push button interface

gesis® KNX push button interface 2-fold

System gesis® KNX - The 2 channel pushbutton interface with integrated bus coupling unit can be used as binary in- or output. In this way, conventional switches can be integrated into the building automation to control e.g. blinds and lighting.

Main supply:Nominal voltage: KNX system voltageNominal current: <10 mAConnection: spring clamp terminalIn-/Outputs:Count: 2, switchableInputs: for potential-free contactsOutputs: for low current LEDs (1 mA)Interface cable: 30 cmInterface extension: up to 5 mMounting: e.g. in flush-mounted socketsType of protection: IP54Dimension in mm: 10x37x37

Brand: Wieland Electric GmbHType: KNX TA 2/2Part No.: F0.000.0038.3

gesis® KNX push button interface 4-fold

System gesis® KNX - The 4 channel pushbutton interface with integrated bus coupling unit can be used as binary in- or output. In this way conventional switches can be integrated into the building automation to control e.g. blinds and lighting.

Main supply:Nominal voltage: KNX system voltageNominal current: <10 mAConnection: spring clamp terminalIn-/Outputs:Count: 4, switchableInputs: for potential-free contactsOutputs: for low current LEDs (1 mA)Interface cable: 30 cmInterface extension: up to 5 mMounting: e.g. in flush-mounted socketsType of protection: IP54Dimension in mm: 10x37x37


gesis® KNX push button interface 6-fach

System gesis® KNX - The 6 channel pushbutton interface with integrated bus coupling unit can be used as binary in- or output. In this way conventional switches can be integrated into the building automation to control e.g. blinds and lighting.

Main supply:Nominal voltage: KNX system voltageNominal current: <10 mAConnection: spring clamp terminal

Page 62/110


In-/Outputs:Count: 6, switchableInputs: for potential-free contactsOutputs max. 4: for low current LEDs (1 mA)Interface cable: 30 cmInterface extension: up to 5 mMounting: e.g. in flush-mounted socketsType of protection: IP54Dimension in mm: 10x37x37


Page 63/110


4.3 DALI

gesis® KNX DALI gateway

System gesis® KNX - The DALI gateway N 141 is a KNX device with a DALI output for up to 64 DALI actuators (e.g. electronic ballasts with DALI interface). DALI sensors are not allowed to be connected to the output. All gateway functions are configured through the ETS.

DALI output according to IEC 60929, for max. 64 DALI ballasts with integrated DALI supply, short-cut-proofNominal voltage: AC/DC 110 - 240 VNominal voltage: KNX system voltageNominal current: <10 mAOperation display: green LEDOperator button to switch between bus and direct control, with yellow LED to indicate direct controlOperator buttons for common on or off switching of all luminaires with red LEDContact system to data railMounting on mounting rail TH35 DIN EN 60715, 4 MW (1 MW = 18 mm),

Brand: Wieland Electric GmbHType: KNX N 141Part No.: F0.000.0017.3

Page 64/110


4.4 Single room temperature control

gesis® KNX single room temperature control

System gesis® KNX - Room thermostat with integrated KNX bus coupling unit for control and regulation of valves and heating actuators. Three integrated inputs can be used for conventional switches/pushbuttons or even for external temperature sensors (optional), window contacts or presence signals.

Main supply:Nominal voltage: KNX system voltageNominal current: <10 mAConnection: spring clamp terminalInputs: 3, for potential-free contactsApplication: room temperature regulation for heating and cooling systemsMounting:Mounting: flush-mounted socket, diameter 55 mmType of protection: IP20Housing color: whiteDimension in mm: 84x80x27

Brand: Wieland Electric GmbHType: KNX RTR SPPart No.: F0.000.0032.0

gesis® KNX motor-driven, continuous

System gesis® KNX - This motor-driven valve control with two binary inputs and valve stroke indicator can be mounted to customary valves using an adapter (within the scope of supply). A fully automatic valve stroke detection dynamically adapts the contact path to the used valve.

Main supply:Nominal voltage: KNX system voltageNominal current: <10 mAConnection: 2 m, 5-pole cableInputs: 2, for potential-free contactsMounting: with adapter included in delivery on heating and cooling valvesType of protection: IP21Housing color: whiteDimension in mm: 84x80x27

Brand: Wieland Electric GmbHType: KNX TH SPart No.: F0.000.0032.1

gesis® KNX single room temperature control fan coil

System gesis® KNX - The room thermostat with integrated bus coupling unit is used to control fan coil systems. It integrates a manual button for selection of the operating modes Off and Auto as well as the fan position. The three available binary inputs can be parameterized freely.

Main supply:Nominal voltage: KNX system voltageNominal current: <10mAConnection: spring clamp terminalInputs: 3, for potential-free contactsApplication: room temperature regulation for heating and cooling systems with fan coilsMounting:Mounting: flush-mounted socket, diameter 55mmType of protection: IP20Housing color: white

Page 65/110


Dimension in mm: 84x80x27

Brand: Wieland Electric GmbHType: KNX RTR FCPart No.: F0.000.0032.7

gesis® KNX valve actuator, 2-point, electro thermal, 230 V

System gesis® KNX - The electro thermal 2-point valve control for 230 V can be mounted to customary valves, simply by using a valve adapter. Valve adapters are not included in the scope of supply.

Main supply:Nominal voltage: 230 VNominal load: 1.8 WInrush current: max 300 mA for max. 200 msConnection: 2-polee cable, 1 mValve actuator current less: valve closedMounting: with adapter on heating and cooling valves (not included)Type of protection: IP54Housing color: whiteDimension in mm: 60x44x61

Brand: Wieland Electric GmbHType: TH P230Part No.: F0.000.0032.3

gesis® KNX valve actuator, 2-Punkt, electro thermal, 24 V

System gesis® KNX - The electro thermal 2-point valve control for 24 V can be mounted to customary valves, simply by using a valve adapter. Valve adapters are not included in the scope of supply.

Main supply:Nominal voltage: 24 V AC/DCNominal load: 1.8 WInrush current: max 300 mA for max. 200 msConnection: 2-polee cable, 1 mValve actuator current less: valve closedMounting: with adapter on heating and cooling valves (not included)Type of protection: IP54Housing color: whiteDimension in mm: 60x44x61

Brand: Wieland Electric GmbHType: TH P24Part No.: F0.000.0032.6

gesis® valve adapter VA78

System gesis® KNX - Valve adapter ring VA 78 for easy installation of the valve controls. The adapter ring is placed on the valve and the valve control is snapped on. Applicable valves: Danfoss RA

Brand: Wieland Electric GmbHType: TH VA78Part No.: F0.000.0032.4

gesis® valve adapter VA80

Page 66/110


System gesis® KNX - Valve adapter ring VA 80 for easy installation of the valve controls. The adapter ring is placed on the valve and the valve control is snapped on. Applicable valves: Onda, Schlösser after '93/1993, Oventropp M30 x 1.5, Heimeier, Herb, Therm-Concept, Frank, Roth (distribution units), Dinotherm (distribution units).

Brand: Wieland Electric GmbHType: TH VA80Part No.: F0.000.0032.5

Page 67/110


4.5 System components

gesis® KNX power supply 160 mA

System gesis® KNX - The DIN rail mounted power supply (PELV) with integrated choke is specifically for KNX networks. The nominal current of 160 mA is sufficient for 32 standard KNX devices. In case of power failure and nominal load the time gap of 200 ms can be bridged.

Main supply:Nominal voltage: 120 - 230 V AC, 50/60 HzConnection: screw-type terminals 0.5 mm²...2.5 mm²Output:Nominal voltage: DC 29 VNominal current: 160 mAShort cut current: limited to 1 ATime gap power failure: 200 ms at nominal loadConnection: spring clamp terminalType of protection: IP20Mounting method: mounting rail TH35 (4 MW)Dimension: 4 MW (72 mm)

Brand: Wieland Electric GmbHType: KNX PS 160Part No.: 83.020.1413.0

gesis® KNX power supply 320 mA

System gesis® KNX - The DIN rail mounted power supply (PELV) with integrated choke is specifically for KNX networks. The nominal current of 320 mA is sufficient for 64 standard KNX devices. In case of power failure and nominal load the time gap of 200 ms can be bridged.

Main supply:Nominal voltage: 120 - 230 V AC, 50/60 HzConnection: screw-type terminals 0.5 mm²...2.5 mm²Output:Nominal voltage: DC 29 VNominal current: 160 mAShort cut current: limited to 1 ATime gap power failure: 200 ms at nominal loadConnection: spring clamp terminalType of protection: IP20Mounting method: mounting rail TH35 (4 MW)Dimension: 4 MW (72 mm)


gesis® KNX Spannungsversorgung 640 mA

System gesis® KNX - The DIN rail mounted power supply (PELV) with integrated choke is specifically for KNX networks. The nominal current of 640 mA is sufficient for 64 standard KNX devices. The current can be split into one output with choke and one without choke. In case of power failure and nominal load the time gap of 200ms can be bridged.

Main supply:Nominal voltage: 120 - 230 V AC, 50/60 HzConnection: screw-type terminals 0.5 mm²...2.5 mm²Output:Nominal voltage: DC 29 V

Page 68/110


Nominal current: 640 mAShort cut current: limited to 1.5 ATime gap power failure: 200 ms at nominal loadConnection: spring clamp terminalType of protection: IP20Mounting method: mounting rail TH35 (4 MW)Dimension: 4 MW (72 mm)


gesis® KNX USB interface

System gesis® KNX - The DIN rail mounted USB interface is used for the bidirectional connection between a PC and the KNX twisted pair topology. The USB connection has a galvanic separation to the KNX twisted pair network.

Main supply:USB: via connected PC, <200 mWKNX: via connected KNX line, <300 mWConnection:KNX TP: spring clamp terminalUSB: female, type BType of protection: IP20Mounting method: mounting rail TH35Dimension: 1 MW (18 mm)

Brand: Wieland Electric GmbHType: KNX USBPart No.: 83.020.1418.1

gesis® KNX line/area coupler

System gesis® KNX - The DIN rail mounted line and backbone coupler is connecting hierarchy levels within a twisted pair KNX topology. The device makes a galvanic separation and can be commissioned with filter tables for telegrams. The device needs no external power supply. The necessary power is pulled out of the connected lines.

Main supply:Higher line:Nominal voltage: 24 V DC (21-29 V DC)Nominal current: ca. 6 mAConnection: spring clamp terminalLower Line:Nominal voltage: 24 V DC (21-29 V DC)Nominal current: ca. 8 mAConnection: spring clamp terminalType of protection: IP20Mounting method: mounting rail TH35 (2 MW)Dimension: 2 MW (36 mm)

Brand: Wieland Electric GmbHType: KNX LKPart No.: 83.020.1416.0

gesis® KNX IP router

Page 69/110


System gesis® KNX - The DIN rail mounted IP router enables the communication between twisted pair lines over LAN (IP) as a fast backbone. In parallel the device can be used as an interface for bus access via IP.

Main supply:Nominal voltage: 12-24 V DC, alternatively, Power over IPConnection:KNX TP: spring clamp terminalMain supply: screw-type terminalsLAN: RJ45Ethernet:Transfer rate: 10BaseTSupported protocols: ARP, ICMP, IGMP, UDP/IP, DHCPType of protection: IP20Mounting method: mounting rail TH35 (2 MW)Dimension: 2 MW (36 mm)

Brand: Wieland Electric GmbHType: KNX IP-RPart No.: 83.020.1417.0

gesis® KNX surge arrester

System gesis® KNX - The type 2 arrester with KNX certification for KNX-TP systems has been tested according to EN 61643-21. It can directly replace the terminal block on KNX devices. The 200 mm grounding conductor is connected directly to the device.

Electrical data:Arrester class: type 2Rated/continuous voltage 24 V/45 V (for KNX TP)KNX connection: spring contact (as terminal, directly pluggable to KNX device)Cables Ø 0.8 mm / 200 mm longGround connection: cables 0.75 mm² / 200 mm longMechanical data:Dimension: in mm 12x11x11Cables: length ca. 200 mm

Brand: Wieland Electric GmbHType: KNX OVPPart No.: F0.000.0008.3

gesis® KNX connection module

System gesis® KNX - The KNX connection module enables a simple tap of the KNX TP1 network in distribution units. The system integrator can access the network with the connection module, without removing field covers and therefore without interfering with the electrical installation.

Electrical data:KNX Twisted Pair (SELV)Nominal current: 3 AConnection type: terminal block (under distributor cover)Pluggable to outside: BST 14i2Mechanical data:Montage auf TH35 e.g. in distribution boxesWidth: 2 MW (36 mm)Accessories: Connectors BST14i2 e.g. 93.422.0553.1

Brand: Wieland Electric GmbHType: KNX REG AMPart No.: F0.000.0033.8

Page 70/110


Page 71/110


5 gesis® RC – EnOcean technology

The radio system is based on the open standard of EnOcean and controls various applications of the electrical installation in buildings. Complex building automation solutions can be constructed by coupling with gateway to standardized systems of KNX and LON. The pluggable radio switching devices are easily installable in suspended ceilings or raised floors due to its low construction height. The pushbuttons and sensors for controlling the switching devices are battery-less and maintenance-free. They can be mounted anywhere, because of the radio-based, wireless communication.

5.1 Flat, direct pluggable actuators

gesis® RC radio-based switching output 4-fold

System gesis® RC - The EnOcean switching output features a very low profile, has a single phase mains supply and four outputs. Up to 30 pairs of rockers from EnOcean switches can be programmed in. No additional housings are required for mounting e.g. in suspended ceilings or false floors. It features an option for direct connection to the flat cable. All electrical connections are pluggable.

Receiving frequency: 868.3 MHzTransmission protocol: EnOceanMain supply:Nominal voltage: 230 V, 50...60 HzNominal current: 16 AConnection: pluggableOutputs:4 Switching outputs, normally openNominal voltage: 230 V, 50...60 HzNominal current: 16 A ohmic loadConnection: pluggableMounting: on-wall, screw fasteningType of protection: IP20Housing: halogen-freeFire behavior: UL 94-V-2Housing color: light gray RAL 7035Dimension in mm: 32x112x254 (HxWxL)

Brand: Wieland Electric GmbHType: RC V-0/4 1PHPart No.: 83.020.0500.0

gesis® RC radio-based switching 4-fold, ext. antenna

System gesis® RC - The EnOcean switching output features a very low profile, has a single phase mains supply and four outputs. Up to 30 pairs of rockers from EnOcean switches can be programmed in. No additional housings are required for mounting e.g. in suspended ceilings or false floors. It features an option for direct connection to the flat cable. The necessary antenna can be connected by a SMA socket. All electrical connections are pluggable.

Receiving frequency: 868.3 MHzAntenna terminal: SMA femaleTransmission protocol: EnOceanMain supply:Nominal voltage: 230 V, 50...60 HzNominal current: 16 AConnection: pluggableOutputs:4 Switching outputs, normally openNominal voltage: 230 V, 50...60 HzNominal current: 16 A ohmic loadConnection: pluggableMounting: on-wall, screw fastening

Page 72/110


Type of protection: IP20Housing: halogen-freeFire behavior: UL 94-V-2Housing color: light gray RAL 7035Dimension in mm: 32x112x254 (HxWxL)

Brand: Wieland Electric GmbHType: RC V-0/4 B 1PHPart No.: 83.020.0500.2

gesis® RC radio-based sunblind output 2-fold

System gesis® RC - The EnOcean shutter output features a very low profile, has a single phase mains supply and four outputs. Up to 30 pairs of rockers from EnOcean switches can be programmed in. No additional housings are required for mounting e.g. in suspended ceilings or false floors. It features an option for direct connection to the flat cable. All electrical connections are pluggable.

Receiving frequency: 868.3 MHzTransmission protocol: EnOceanMain supply:Nominal voltage: 230 V, 50...60 HzNominal current: 16 AConnection: pluggableOutputs:2 Sunblind outputsNominal voltage: 230 V, 50...60 HzNominal current: 5 A ohmic loadConnection: pluggableMounting: on-wall, screw fasteningType of protection: IP20Housing: halogen-freeFire behavior: UL 94-V-2Housing color: light gray RAL 7035Dimension in mm: 32x112x254 (HxWxL)

Brand: Wieland Electric GmbHType: RC V-0/2W AL 1PHPart No.: 83.020.0501.1

gesis® RC radio-based sunblind 2-fold, ext. antenna

System gesis® RC - The EnOcean shutter output features a very low profile, has a single phase mains supply and four outputs. Up to 30 pairs of rockers from EnOcean switches can be programmed in. No additional housings are required for mounting e.g. in suspended ceilings or false floors. It features an option for direct connection to the flat cable. The necessary antenna can be connected by a SMA socket. All electrical connections are pluggable.

Receiving frequency: 868.3 MHzAntenna terminal: SMA femaleTransmission protocol: EnOceanNominal voltage: 230 V, 50...60 HzNominal current: 16 AConnection: pluggableOutputs:2 Sunblind outputsNominal voltage: 230 V, 50...60 HzNominal current: 5 A ohmic loadConnection: pluggableMounting: on-wall, screw fasteningType of protection: IP20Housing: halogen-free

Page 73/110


Fire behavior: UL 94-V-2Housing color: light gray RAL 7035Dimension in mm: 32x112x254 (HxWxL)

Brand: Wieland Electric GmbHType: RC V-0/2W AL B 1PHPart No.: 83.020.0501.2

Page 74/110


5.2 Switching outputs for outside applications

gesis® RC radio based switching output 4-fold, IP68

System gesis® RC - The EnOcean switching output has an IP68 housing for surface mounting with four independent relay outputs as well as a forwarded main supply and can be controlled by up to 30 EnOcean pushbuttons. All electrical connections are pluggable.

Receiving frequency: 868.3 MHzTransmission protocol: EnOceanMain supply:Nominal voltage: 230 V, 50...60 HzNominal current: 16 AConnection: pluggableOutputs:Count: 4Type: normally open 1-pole, phase switchedNominal voltage: 230 V, 50...60 HzNominal load: each output max. 6 A ohmic loadConnection: pluggable1 through wiringNominal voltage: 230 V, 50...60 HzNominal current: 20 AConnection: pluggable, 2-fold parallelMounting: on-wall, screw fasteningType of protection: IP68Housing: halogen-freeFire behavior: UL 94-V-2Housing color: blackDimension in mm: 96x104x162 (HxWxL)

Brand: Wieland Electric GmbHType: RC RST-0/4Part No.: 83.020.0505.0

Page 75/110


5.3 Flush-mounted actuator

gesis® RC radio-based switching output, 1-fold, flush-mounted

System gesis® RC - The radio controlled (EnOcean) output is for mounting in or on wall installation boxes. It has one relay output and up to 30 pairs of rockers from EnOcean switches that can be programmed in. The electrical connections are carried out with screw connection.

Receiving frequency: 868.3 MHzTransmission protocol: EnOceanMain supply:Nominal voltage: 230 V, 50...60 HzConnection: screw-type terminalsOutput:1 Switching output, normally openConnection: screw-type terminalsNominal voltage: 230 V, 50...60 HzNominal load: 5 A ohmic loadType of protection: IP30Dimension in mm: 48x29x35 (LxWxH)

Brand: Wieland Electric GmbHType: RC UP-0/1Part No.: 83.020.0506.0

Page 76/110


5.4 EnOcean output

gesis® RC radio-based switching output, 1-fold, surface-mounted

System gesis® RC - The radio controlled (EnOcean) output has an on wall housing. It has one relay output and up to 30 pairs of rockers from EnOcean switches that can be programmed in. It can be installed as an adapter between feed in cable and e.g. luminaries. The electrical connections are pluggable.

Receiving frequency: 868.3 MHzTransmission protocol: EnOceanMain supply:Nominal voltage: 230 V, 50...60 HzOutput:1 Switching output, normally openNominal voltage: 230 V, 50...60 HzNominal load: 5 A ohmic loadConnection: GST18i3, black codingType of protection: IP30Dimension in mm: 108x70x35 (LxWxH) without connector

Brand: Wieland Electric GmbHType: RC ZW-0/1BPart No.: F0.000.0016.9

Page 77/110


5.5 Window contact

gesis® RC window contact

System gesis® RC - The white radio (EnOcean) window contact is battery-less, powered from a solar panel and is maintenance-free. If the internal energy buffer is completely charged, the power reserve will last a minimum of 14 hours. The small-sized sender and scanning magnet allows an inconspicuous installation.

Transmission frequency: 868.3 MHzTransmission protocol: EnOceanNominal range: 300 m on free fieldLine of sight: approx. 50 m in floors, approx. 200 m in hallsPlasterboard / dry wood: approx. 30 m; approx. 5 wallsBrick walls / aerated concrete: approx. 20 m; approx. 3 wallsType of protection: IP20Min. brightness: 100 Lux (optimal from 400 lux)Mounting: on-wallDimension in mm:Window contact: 110x19x15Magnet: 23x14x6

Brand: Wieland Electric GmbHType: RC S-SRWSENFKPart No.: F0.000.0009.0

Page 78/110


5.6 EnOcean Gateway

gesis® FLEX EnOcean Gateway 32-fold

System gesis® FLEX - The bidirectional gateway for 32 channels is an independent KNX device, the surface mounted housing can be fitted on DIN rails for decentralized installation. The device is based on the EnOcean Equipment Profiles (EEP). The software tool for commissioning is completed by a comfortable manual control using an LCD-display. The gateway additionally supports logical and control functions and includes a radio repeater. The KNX connection is pluggable.

Supply: KNX System voltageNominal current: ca. 12 mAEnOcean:Interface: ISM band 868,3 MHz, ASKRange: max. 100 mSupported devices: EEP Version 2.1External antenna with 5 m cable and magnet baseManual control: buttons on moduleStatus bar: LEDs on moduleDisplay: for system integration and diagnosisKNX connection according to KNX handbookProtection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 115 mm (127 mm incl. left and right end cap)Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areasAccessories: needed end caps are part of the delivery

Brand: Wieland Electric GmbHType: FLEX-ENO32Part No.: 83.020.0628.0

gesis® FLEX EnOcean Gateway 32-fach incl. gesis® plugs

System gesis® FLEX - The bidirectional gateway for 32 channels is an independent KNX device, the surface mounted housing can be fitted on DIN rails for decentralized installation. The device is based on the EnOcean Equipment Profiles (EEP). The software tool for commissioning is completed by a comfortable manual control using an LCD-display. The gateway additionally supports logical and control functions and includes a radio repeater. The KNX connection is pluggable. All necessary plugs are enclosed.

Supply: KNX System voltageNominal current: ca. 12 mAEnOcean:Interface: ISM band 868,3 MHz, ASKRange: max. 100 mSupported devices: EEP Version 2.1External antenna with 5 m cable and magnet baseManual control: buttons on moduleStatus bar: LEDs on moduleDisplay: for system integration and diagnosisKNX connection according to KNX handbookProtection class: IP20Housing: halogen-freeFlammability class: UL 94-V-2Housing color: upper part light grey, lower part blackDimensions:Length: 115 mm (127 mm incl. left and right end cap)

Page 79/110


Width: 149 mm incl. plug lockingHeight: 44 mm without DIN railMounting: surface mounted, DIN rail TH35, system-compatible mounting frame or in flat mounting areasAccessories: needed end caps as well as plugs are part of the delivery

Brand: Wieland Electric GmbHType: FLEX-ENO32 ZPart No.: 83.020.0628.1

gesis® RM radio controlled input 2x8-fold

System gesis® RM - The extension module has 16 radio controlled inputs and will be managed by a system compatible base module. It can be fixed on a DIN rail and has to be assembled in a distribution box for decentralized installation. The input can map 170 radio channels to 16 input channels. The allocation of the radio channels to the input channels will be done at the module.

Main supply: via connection to base moduleConnection to base module: ribbon cable, included in deliveryInputs: 16 in two groups, 8 eachReceiving frequency: 868.3 MHzAntenna terminal: SMA femaleTransmission protocol: EnOceanType of protection: IP00Mounting method: mounting rail TH35Housing: black, halogen-freeDimension in mm: 100x49x51 (HxWxD), width approx. 2.7 MW

Brand: Wieland Electric GmbHType: RM-16/0 (RC)Part No.: 83.020.0408.0

Page 80/110


5.7 Handheld transmitter

gesis® RC handheld transmitter 4-channel, white

System gesis® RC - The white 4-channel battery-less, handheld radio (EnOcean) generates its own energy while pressing the pushbutton and is maintenance-free. It has four rockers which can be used e.g. for light or shutter control.

Transmission frequency: 868.3 MHzTransmission protocol: EnOceanNominal range: 300 m on free fieldLine of sight: approx. 50 m in floors, approx. 200 m in hallsPlasterboard / dry wood: approx. 30 m; approx. 5 wallsBrick walls / aerated concrete: approx. 20 m; approx. 3 wallsDimension in mm: 50x82x21Color: alike RAL 9010

Brand: Wieland Electric GmbHType: RC B-04WSSOHPart No.: F0.000.0009.1

gesis® RC handheld transmitter4-channel, black

System gesis® RC - The black 4-channel battery, less handheld radio (EnOcean) generates its own energy while pressing the pushbutton and is maintenance-free. It has four rockers which can be used e.g. for light or shutter control.

Transmission frequency: 868.3 MHzTransmission protocol: EnOceanNominal range: 300 m on free fieldLine of sight: approx. 50 m in floors, approx. 200 m in hallsPlasterboard / dry wood: approx. 30 m; approx. 5 wallsBrick walls / aerated concrete: approx. 20 m; approx. 3 wallsDimension in mm: 50x82x21Color: alike RAL 9005

Brand: Wieland Electric GmbHType: RC B-04SWSOHPart No.: F0.000.0009.2

gesis® RC handheld transmitter4-channel, silver

System gesis® RC - The silver finish 4-channel battery-less, handheld radio (EnOcean) generates its own energy while pressing the pushbutton and is maintenance-free. It has four rockers which can be used e.g. for light or shutter control.

Transmission frequency: 868.3 MHzTransmission protocol: EnOceanNominal range: 300 m on free fieldLine of sight: approx. 50 m in floors, approx. 200 m in hallsPlasterboard / dry wood: approx. 30 m; approx. 5 wallsBrick walls / aerated concrete: approx. 20 m; approx. 3 wallsDimension in mm: 50x82x21Color: silver finished

Brand: Wieland Electric GmbHType: RC B-04SISOHPart No.: F0.000.0009.3

Page 81/110


5.8 Multivendor radio switches

gesis® RC multivendor radio switch, light 2-channel, white

System gesis® RC - The white 2-channel battery-less radio switch (EnOcean) generates its own energy while pressing the pushbutton and is maintenance-free. The rocker is in neutral center position and marked with I/O symbols. It fits into 55x55 mm frames from different switch manufacturers. It can be mounted on flat surfaces with screws or adhesive pads (included in delivery).

Transmission frequency: 868.3 MHzTransmission protocol: EnOceanNominal range: 300 m on free fieldLine of sight: approx. 50 m in floors, approx. 200 m in hallsPlasterboard / dry wood: approx. 30 m; approx. 5 wallsBrick walls / aerated concrete: approx. 20 m; approx. 3 wallsMarking: "I" / "O"Mounting:Flush-mounted, without housing,Screw or sticking fasteningColor: white

Brand: Wieland Electric GmbHType: RC B-02WSSPHB01Part No.: F0.000.0005.6

gesis® RC multivendor radio switch, light 2-channel, anthracite

System gesis® RC - The anthracite 2-channel battery-less radio switch (EnOcean) generates its own energy while pressing the pushbutton and is maintenance-free. The rocker is in neutral center position and marked with I/O symbols. It fits into 55x55 mm frames from different switch manufacturers. It can be mounted on flat surfaces with screws or adhesive pads (included in delivery).

Transmission frequency: 868.3 MHzTransmission protocol: EnOceanNominal range: 300 m on free fieldLine of sight: approx. 50 m in floors, approx. 200 m in hallsPlasterboard / dry wood: approx. 30 m; approx. 5 wallsBrick walls / aerated concrete: approx. 20 m; approx. 3 wallsMarking: "I" / "O"Mounting:Flush-mounted, without housing,Screw or sticking fasteningColor: anthracite

Brand: Wieland Electric GmbHType: RC B-02ANSPHB01Part No.: F0.000.0007.5

gesis® RC multivendor radio switch, light 2-channel, aluminumminum finished

System gesis® RC - The aluminum finished 2-channel battery-less radio switch (EnOcean) generates its own energy while pressing the pushbutton and is maintenance-free. The rocker is in neutral center position and marked with I/O symbols. It fits into 55x55 mm frames from different switch manufacturers. It can be mounted on flat surfaces with screws or adhesive pads (included in delivery).

Transmission frequency: 868.3 MHzTransmission protocol: EnOceanNominal range: 300 m on free fieldLine of sight: approx. 50 m in floors, approx. 200 m in hallsPlasterboard / dry wood: approx. 30 m; approx. 5 walls

Page 82/110


Brick walls / aerated concrete: approx. 20 m; approx. 3 wallsMarking: "I" / "O"Mounting:Flush-mounted, without housing,Screw or sticking fasteningColor: aluminum finished

Brand: Wieland Electric GmbHType: RC B-02ALSPHB01Part No.: F0.000.0007.6

gesis® RC multivendor radio switch, sunblind 2-channel, white

System gesis® RC - The white 2-channel battery-less radio switch (EnOcean) generates its own energy while pressing the pushbutton and is maintenance-free. The rocker is in neutral center position and marked with up/down symbols. It fits into 55x55 mm frames from different switch manufacturers. It can be mounted on flat surfaces with screws or adhesive pads (included in delivery).

Transmission frequency: 868.3 MHzTransmission protocol: EnOceanNominal range: 300 m on free fieldLine of sight: approx. 50 m in floors, approx. 200 m in hallsPlasterboard / dry wood: approx. 30 m; approx. 5 wallsBrick walls / aerated concrete: approx. 20 m; approx. 3 wallsMarking: "Up" / "Down" (symbols),Mounting:Flush-mounted, without housing,Screw or sticking fasteningColor: white


gesis® RC multivendor radio switch, sunblind 2-channel, anthracite

System gesis® RC - The anthracite 2-channel battery-less radio switch (EnOcean) generates its own energy while pressing the pushbutton and is maintenance-free. The rocker is in neutral center position and marked with up/down symbols. It fits into 55x55 mm frames from different switch manufacturers. It can be mounted on flat surfaces with screws or adhesive pads (included in delivery).

Transmission frequency: 868.3 MHzTransmission protocol: EnOceanNominal range: 300 m on free fieldLine of sight: approx. 50 m in floors, approx. 200 m in hallsPlasterboard / dry wood: approx. 30 m; approx. 5 wallsBrick walls / aerated concrete: approx. 20 m; approx. 3 wallsMarking: "Up" / "Down" (symbols),Mounting:Flush-mounted, without housing,Screw or sticking fasteningColor: anthracite


gesis® RC multivendor radio switch, sunblind 2-channel, aluminumminum finished

Page 83/110


System gesis® RC - The aluminum finished 2-channel battery-less radio switch (EnOcean) generates its own energy while pressing the pushbutton and is maintenance-free. The rocker is in neutral center position and marked with up/down symbols. It fits into 55x55 mm frames from different switch manufacturers. It can be mounted on flat surfaces with screws or adhesive pads (included in delivery).

Transmission frequency: 868.3 MHzTransmission protocol: EnOceanNominal range: 300 m on free fieldLine of sight: approx. 50 m in floors, approx. 200 m in hallsPlasterboard / dry wood: approx. 30 m; approx. 5 wallsBrick walls / aerated concrete: approx. 20 m; approx. 3 wallsMarking: "Up" / "Down" (symbols),Mounting:Flush-mounted, without housing,Screw or sticking fasteningColor: aluminum finished


gesis® RC multivendor radio switch, light 4-channel, white

System gesis® RC - The white 4-channel battery-less radio switch (EnOcean) generates its own energy while pressing the pushbutton and is maintenance-free. The rocker is in neutral center position and marked with I/O symbols. It fits into 55x55 mm frames from different switch manufacturers. It can be mounted on flat surfaces with screws or adhesive pads (included in delivery).

Transmission frequency: 868.3 MHzTransmission protocol: EnOceanNominal range: 300 m on free fieldLine of sight: approx. 50 m in floors, approx. 200 m in hallsPlasterboard / dry wood: approx. 30 m; approx. 5 wallsBrick walls / aerated concrete: approx. 20 m; approx. 3 wallsMarking: "I" / "O"Mounting:Flush-mounted, without housing,Screw or sticking fasteningColor: white


gesis® RC multivendor radio switch, light 4-channel, anthracite

System gesis® RC - The anthracite 4-channel battery-less radio switch (EnOcean) generates its own energy while pressing the pushbutton and is maintenance-free. The rocker is in neutral center position and marked with I/O symbols. It fits into 55x55 mm frames from different switch manufacturers. It can be mounted on flat surfaces with screws or adhesive pads (included in delivery).

Transmission frequency: 868.3 MHzTransmission protocol: EnOceanNominal range: 300 m on free fieldLine of sight: approx. 50 m in floors, approx. 200 m in hallsPlasterboard / dry wood: approx. 30 m; approx. 5 wallsBrick walls / aerated concrete: approx. 20 m; approx. 3 wallsMarking: "I" / "O"Mounting:Flush-mounted, without housing,Screw or sticking fastening

Page 84/110


Color: anthracite


gesis® RC multivendor radio switch, light 4-channel, aluminumminum finished

System gesis® RC - The aluminum finished 4-channel battery-less radio switch (EnOcean) generates its own energy while pressing the pushbutton and is maintenance-free. The rocker is in neutral center position and marked with I/O symbols. It fits into 55x55 mm frames from different switch manufacturers. It can be mounted on flat surfaces with screws or adhesive pads (included in delivery).

Transmission frequency: 868.3 MHzTransmission protocol: EnOceanNominal range: 300 m on free fieldLine of sight: approx. 50 m in floors, approx. 200 m in hallsPlasterboard / dry wood: approx. 30 m; approx. 5 wallsBrick walls / aerated concrete: approx. 20 m; approx. 3 wallsMarking: "I" / "O"Mounting:Flush-mounted, without housing,Screw or sticking fasteningColor: aluminum finished


gesis® RC multivendor radio switch, sunblind 4-channel, white

System gesis® RC - The white 4-channel battery-less radio switch (EnOcean) generates its own energy while pressing the pushbutton and is maintenance-free. The rocker is in neutral center position and marked with up/down symbols. It fits into 55x55 mm frames from different switch manufacturers. It can be mounted on flat surfaces with screws or adhesive pads (included in delivery).

Transmission frequency: 868.3 MHzTransmission protocol: EnOceanNominal range: 300 m on free fieldLine of sight: approx. 50 m in floors, approx. 200 m in hallsPlasterboard / dry wood: approx. 30 m; approx. 5 wallsBrick walls / aerated concrete: approx. 20 m; approx. 3 wallsMarking: "Up" / "Down" (symbols),Mounting:Flush-mounted, without housing,Screw or sticking fasteningColor: white


gesis® RC multivendor radio switch, sunblind 4-channel, anthracite

System gesis® RC - The anthracite 4-channel battery-less radio switch (EnOcean) generates its own energy while pressing the pushbutton and is maintenance-free. The rocker is in neutral center position and marked with up/down symbols. It fits into 55x55 mm frames from different switch manufacturers. It can be mounted on flat surfaces with screws or adhesive pads (included in delivery).

Page 85/110


Transmission frequency: 868.3 MHzTransmission protocol: EnOceanNominal range: 300 m on free fieldLine of sight: approx. 50 m in floors, approx. 200 m in hallsPlasterboard / dry wood: approx. 30 m; approx. 5 wallsBrick walls / aerated concrete: approx. 20 m; approx. 3 wallsMarking: "Up" / "Down" (symbols),Mounting:Flush-mounted, without housing,Screw or sticking fasteningColor: anthracite


gesis® RC multivendor radio switch, sunblind 4-channel, aluminumminum finished

System gesis® RC - The aluminum finished 4-channel battery-less radio switch (EnOcean) generates its own energy while pressing the pushbutton and is maintenance-free. The rocker is in neutral center position and marked with up/down symbols. It fits into 55x55 mm frames from different switch manufacturers. It can be mounted on flat surfaces with screws or adhesive pads (included in delivery).

Transmission frequency: 868.3 MHzTransmission protocol: EnOceanNominal range: 300 m on free fieldLine of sight: approx. 50 m in floors, approx. 200 m in hallsPlasterboard / dry wood: approx. 30 m; approx. 5 wallsBrick walls / aerated concrete: approx. 20 m; approx. 3 wallsMarking: "Up" / "Down" (symbols),Mounting:Flush-mounted, without housing,Screw or sticking fasteningColor: aluminum finished


Page 86/110


5.9 Radio switch,

gesis® RC radio switch, light 2-channel, white

System gesis® RC - The white 2-channel battery-less radio switch (EnOcean) with bright surface generates its own energy while pressing the pushbutton and is maintenance-free. The rocker is in neutral center position and marked with I/O symbols. It fits into system compatible frames. It can be mounted on flat surfaces with screws or adhesive pads (included in delivery).

Transmission frequency: 868.3 MHzTransmission protocol: EnOceanNominal range: 300 m on free fieldLine of sight: approx. 50 m in floors, approx. 200 m in hallsPlasterboard / dry wood: approx. 30 m; approx. 5 wallsBrick walls / aerated concrete: approx. 20 m; approx. 3 wallsMarking: "I" / "O"Mounting:Flush-mounted, without housing,Screw or sticking fasteningColor: white, bright surface

Brand: Wieland Electric GmbHType: RC B-02WSSPNB01Part No.: F0.000.0025.0

gesis® RC radio switch, light 2-channel, piano black

System gesis® RC - The piano black 2-channel battery-less radio switch (EnOcean) with bright surface generates its own energy while pressing the pushbutton and is maintenance-free. The rocker is in neutral center position and marked with I/O symbols. It fits into system compatible frames. It can be mounted on flat surfaces with screws or adhesive pads (included in delivery).

Transmission frequency: 868.3 MHzTransmission protocol: EnOceanNominal range: 300 m on free fieldLine of sight: approx. 50 m in floors, approx. 200 m in hallsPlasterboard / dry wood: approx. 30 m; approx. 5 wallsBrick walls / aerated concrete: approx. 20 m; approx. 3 wallsMarking: "I" / "O"Mounting:Flush-mounted, without housing,Screw or sticking fasteningColor: piano black, bright surface

Brand: Wieland Electric GmbHType: RC B-02SWSPNB01Part No.: F0.000.0025.9

gesis® RC radio switch, light 2-channel, aluminum

System gesis® RC - The aluminum 2-channel battery-less radio switch (EnOcean) with bright surface generates its own energy while pressing the pushbutton and is maintenance-free. The rocker is in neutral center position and marked with I/O symbols. It fits into system compatible frames. It can be mounted on flat surfaces with screws or adhesive pads (included in delivery).

Transmission frequency: 868.3 MHzTransmission protocol: EnOceanNominal range: 300 m on free fieldLine of sight: approx. 50 m in floors, approx. 200 m in hallsPlasterboard / dry wood: approx. 30 m; approx. 5 walls

Page 87/110


Brick walls / aerated concrete: approx. 20 m; approx. 3 wallsMarking: "I" / "O"Mounting:Flush-mounted, without housing,Screw or sticking fasteningColor: aluminum, bright surface

Brand: Wieland Electric GmbHType: RC B-02ALSPNB01Part No.: F0.000.0026.8

gesis® RC radio switch, sunblind 2-channel, white

System gesis® RC - The white 2-channel battery-less radio switch (EnOcean) with bright surface generates its own energy while pressing the pushbutton and is maintenance-free. The rocker is in neutral center position and marked with up/down symbols. It fits into system compatible frames. It can be mounted on flat surfaces with screws or adhesive pads (included in delivery).

Transmission frequency: 868.3 MHzTransmission protocol: EnOceanNominal range: 300 m on free fieldLine of sight: approx. 50 m in floors, approx. 200 m in hallsPlasterboard / dry wood: approx. 30 m; approx. 5 wallsBrick walls / aerated concrete: approx. 20 m; approx. 3 wallsMarking: "Up" / "Down" (symbols),Mounting:Flush-mounted, without housing,Screw or sticking fasteningColor: white, bright surface


gesis® RC radio switch, sunblind 2-channel, piano black

System gesis® RC - The piano black 2-channel battery-less radio switch (EnOcean) with bright surface generates its own energy while pressing the pushbutton and is maintenance-free. The rocker is in neutral center position and marked with up/down symbols. It fits into system compatible frames. It can be mounted on flat surfaces with screws or adhesive pads (included in delivery).

Transmission frequency: 868.3 MHzTransmission protocol: EnOceanNominal range: 300 m on free fieldLine of sight: approx. 50 m in floors, approx. 200 m in hallsPlasterboard / dry wood: approx. 30 m; approx. 5 wallsBrick walls / aerated concrete: approx. 20 m; approx. 3 wallsMarking: "Up" / "Down" (symbols),Mounting:Flush-mounted, without housing,Screw or sticking fasteningColor: piano black, bright surface


gesis® RC radio switch, sunblind 2-channel, aluminum

Page 88/110


System gesis® RC - The aluminum 2-channel battery-less radio switch (EnOcean) with bright surface generates its own energy while pressing the pushbutton and is maintenance-free. The rocker is in neutral center position and marked with up/down symbols. It fits into system compatible frames. It can be mounted on flat surfaces with screws or adhesive pads (included in delivery).

Transmission frequency: 868.3 MHzTransmission protocol: EnOceanNominal range: 300 m on free fieldLine of sight: approx. 50 m in floors, approx. 200 m in hallsPlasterboard / dry wood: approx. 30 m; approx. 5 wallsBrick walls / aerated concrete: approx. 20 m; approx. 3 wallsMarking: "Up" / "Down" (symbols),Mounting:Flush-mounted, without housing,Screw or sticking fasteningColor: aluminum, bright surface


gesis® RC radio switch 2-channel, white

System gesis® RC - The white 2-channel battery-less radio switch (EnOcean) with bright surface generates its own energy while pressing the pushbutton and is maintenance-free. The rocker is in neutral center position. It fits into system compatible frames. It can be mounted on flat surfaces with screws or adhesive pads (included in delivery).

Transmission frequency: 868.3 MHzTransmission protocol: EnOceanNominal range: 300 m on free fieldLine of sight: approx. 50 m in floors, approx. 200 m in hallsPlasterboard / dry wood: approx. 30 m; approx. 5 wallsBrick walls / aerated concrete: approx. 20 m; approx. 3 wallsMounting:Flush-mounted, without housing,Screw or sticking fasteningColor: white, bright surface


gesis® RC radio switch 2-channel, piano black

System gesis® RC - The piano black 2-channel battery-less radio switch (EnOcean) with bright surface generates its own energy while pressing the pushbutton and is maintenance-free. The rocker is in neutral center position. It fits into system compatible frames. It can be mounted on flat surfaces with screws or adhesive pads (included in delivery).

Transmission frequency: 868.3 MHzTransmission protocol: EnOceanNominal range: 300 m on free fieldLine of sight: approx. 50 m in floors, approx. 200 m in hallsPlasterboard / dry wood: approx. 30 m; approx. 5 wallsBrick walls / aerated concrete: approx. 20 m; approx. 3 wallsMounting:Flush-mounted, without housing,Screw or sticking fasteningColor: piano black, bright surface

Page 89/110



gesis® RC radio switch 2-channel, aluminum

System gesis® RC - The aluminum 2-channel battery-less radio switch (EnOcean) with bright surface generates its own energy while pressing the pushbutton and is maintenance-free. The rocker is in neutral center position. It fits into system compatible frames. It can be mounted on flat surfaces with screws or adhesive pads (included in delivery).

Transmission frequency: 868.3 MHzTransmission protocol: EnOceanNominal range: 300 m on free fieldLine of sight: approx. 50 m in floors, approx. 200 m in hallsPlasterboard / dry wood: approx. 30 m; approx. 5 wallsBrick walls / aerated concrete: approx. 20 m; approx. 3 wallsMounting:Flush-mounted, without housing,Screw or sticking fasteningColor: aluminum, bright surface


gesis® RC radio switch, light 4-channel, white

System gesis® RC - The white 4-channel battery-less radio switch (EnOcean) with bright surface generates its own energy while pressing the pushbutton and is maintenance-free. The rocker is in neutral center position and marked with I/O symbols. It fits into system compatible frames. It can be mounted on flat surfaces with screws or adhesive pads (included in delivery).

Transmission frequency: 868.3 MHzTransmission protocol: EnOceanNominal range: 300 m on free fieldLine of sight: approx. 50 m in floors, approx. 200 m in hallsPlasterboard / dry wood: approx. 30 m; approx. 5 wallsBrick walls / aerated concrete: approx. 20 m; approx. 3 wallsMarking: "I" / "O"Mounting:Flush-mounted, without housing,Screw or sticking fasteningColor: white, bright surface


gesis® RC radio switch, light 4-channel, piano black

System gesis® RC - The piano black 4-channel battery-less radio switch (EnOcean) with bright surface generates its own energy while pressing the pushbutton and is maintenance-free. The rocker is in neutral center position and marked with I/O symbols. It fits into system compatible frames. It can be mounted on flat surfaces with screws or adhesive pads (included in delivery).

Transmission frequency: 868.3 MHzTransmission protocol: EnOceanNominal range: 300 m on free field

Page 90/110


Line of sight: approx. 50 m in floors, approx. 200 m in hallsPlasterboard / dry wood: approx. 30 m; approx. 5 wallsBrick walls / aerated concrete: approx. 20 m; approx. 3 wallsMarking: "I" / "O"Mounting:Flush-mounted, without housing,Screw or sticking fasteningColor: piano black, bright surface


gesis® RC radio switch, light 4-channel, aluminum

System gesis® RC - The aluminum 4-channel battery-less radio switch (EnOcean) with bright surface generates its own energy while pressing the pushbutton and is maintenance-free. The rocker is in neutral center position and marked with I/O symbols. It fits into system compatible frames. It can be mounted on flat surfaces with screws or adhesive pads (included in delivery).

Transmission frequency: 868.3 MHzTransmission protocol: EnOceanNominal range: 300 m on free fieldLine of sight: approx. 50 m in floors, approx. 200 m in hallsPlasterboard / dry wood: approx. 30 m; approx. 5 wallsBrick walls / aerated concrete: approx. 20 m; approx. 3 wallsMarking: "I" / "O"Mounting:Flush-mounted, without housing,Screw or sticking fasteningColor: aluminum, bright surface


gesis® RC radio switch, sunblind 4-channel, white

System gesis® RC - The white 4-channel battery-less radio switch (EnOcean) with bright surface generates its own energy while pressing the pushbutton and is maintenance-free. The rocker is in neutral center position and marked with up/down symbols. It fits into system compatible frames. It can be mounted on flat surfaces with screws or adhesive pads (included in delivery).

Transmission frequency: 868.3 MHzTransmission protocol: EnOceanNominal range: 300 m on free fieldLine of sight: approx. 50 m in floors, approx. 200 m in hallsPlasterboard / dry wood: approx. 30 m; approx. 5 wallsBrick walls / aerated concrete: approx. 20 m; approx. 3 wallsMarking: "Up" / "Down" (symbols),Mounting:Flush-mounted, without housing,Screw or sticking fasteningColor: white, bright surface


Page 91/110


gesis® RC radio switch, sunblind 4-channel, piano black

System gesis® RC - The piano black 4-channel battery-less radio switch (EnOcean) with bright surface generates its own energy while pressing the pushbutton and is maintenance-free. The rocker is in neutral center position and marked with up/down symbols. It fits into system compatible frames. It can be mounted on flat surfaces with screws or adhesive pads (included in delivery).

Transmission frequency: 868.3 MHzTransmission protocol: EnOceanNominal range: 300 m on free fieldLine of sight: approx. 50 m in floors, approx. 200 m in hallsPlasterboard / dry wood: approx. 30 m; approx. 5 wallsBrick walls / aerated concrete: approx. 20 m; approx. 3 wallsMarking: "Up" / "Down" (symbols),Mounting:Flush-mounted, without housing,Screw or sticking fasteningColor: piano black, bright surface


gesis® RC radio switch, sunblind 4-channel, aluminum

System gesis® RC - The aluminum 4-channel battery-less radio switch (EnOcean) with bright surface generates its own energy while pressing the pushbutton and is maintenance-free. The rocker is in neutral center position and marked with up/down symbols. It fits into system compatible frames. It can be mounted on flat surfaces with screws or adhesive pads (included in delivery).

Transmission frequency: 868.3 MHzTransmission protocol: EnOceanNominal range: 300 m on free fieldLine of sight: approx. 50 m in floors, approx. 200 m in hallsPlasterboard / dry wood: approx. 30 m; approx. 5 wallsBrick walls / aerated concrete: approx. 20 m; approx. 3 wallsMarking: "Up" / "Down" (symbols),Mounting:Flush-mounted, without housing,Screw or sticking fasteningColor: aluminum, bright surface


gesis® RC radio switch 4-channel, white

System gesis® RC - The white 4-channel battery-less radio switch (EnOcean) with bright surface generates its own energy while pressing the pushbutton and is maintenance-free. The rocker is in neutral center position. It fits into system compatible frames. It can be mounted on flat surfaces with screws or adhesive pads (included in delivery).

Transmission frequency: 868.3 MHzTransmission protocol: EnOceanNominal range: 300 m on free fieldLine of sight: approx. 50 m in floors, approx. 200 m in hallsPlasterboard / dry wood: approx. 30 m; approx. 5 wallsBrick walls / aerated concrete: approx. 20 m; approx. 3 wallsMounting:Flush-mounted, without housing,

Page 92/110


Screw or sticking fasteningColor: white, bright surface


gesis® RC radio switch 4-channel, piano black

System gesis® RC - The piano black 4-channel battery-less radio switch (EnOcean) with bright surface generates its own energy while pressing the pushbutton and is maintenance-free. The rocker is in neutral center position. It fits into system compatible frames. It can be mounted on flat surfaces with screws or adhesive pads (included in delivery).



gesis® RC radio switch 4-channel, aluminum

System gesis® RC - The aluminum 4-channel battery-less radio switch (EnOcean) with bright surface generates its own energy while pressing the pushbutton and is maintenance-free. The rocker is in neutral center position. It fits into system compatible frames. It can be mounted on flat surfaces with screws or adhesive pads (included in delivery).



gesis® RC combination frame 1-fold, white

System gesis® RC - White combination frame with bright surface for one radio switch 2 or 4 channel.

Color: white, bright surfaceDimension: 83x83 mm outside dimension


Page 93/110


Type: RC A-BFWSSPN1FPart No.: F0.000.0025.6

gesis® RC combination frame 1-fold, piano black

System gesis® RC - Piano black combination frame with bright surface for one radio switch 2 or 4 channel.

Color: piano black, bright surfaceDimension: 83x83 mm outside dimension

Brand: Wieland Electric GmbHType: RC A-BFSWSPN1FPart No.: F0.000.0026.5

gesis® RC combination frame 1-fold, aluminum

System gesis® RC - Aluminum combination frame with bright surface for one radio switch 2 or 4 channel.

Color: aluminum, bright surfaceDimension: 83x83 mm outside dimension

Brand: Wieland Electric GmbHType: RC A-BFALSPN1FPart No.: F0.000.0027.4


System gesis® RC - White combination frame with bright surface for two radio switch 2 or 4 channel.


Brand: Wieland Electric GmbHType: RC A-BFWSSPN2FPart No.: F0.000.0025.7


System gesis® RC - Piano black combination frame with bright surface for two radio switch 2 or 4 channel.




System gesis® RC - Aluminum combination frame with bright surface for two radio switch 2 or 4 channel.



Page 94/110



System gesis® RC - White combination frame with bright surface for three radio switch 2 or 4 channel.


Brand: Wieland Electric GmbHType: RC A-BFWSSPN3FPart No.: F0.000.0025.8


System gesis® RC - Piano black combination frame with bright surface for three radio switch 2 or 4 channel.




System gesis® RC - Aluminum combination frame with bright surface for three radio switch 2 or 4 channel.



Page 95/110


5.10 Hotel-Card-Switch

gesis® RC hotel-card-switch, white

System gesis® RC - Energy self-sufficient, white hotel-card-switch for storage and simultaneous sending of an EnOcean telegram. Together with suitable actuators from the gesis® RC device series, the power supply of the room can be operated directly or the signal can be transmitted to the building automation.

Transmission frequency: 868.3 MHzTransmission protocol: EnOceanNominal range: 300 m on free fieldLine of sight: approx. 50 m in floors, approx. 200 m in hallsPlasterboard / dry wood: approx. 30 m; approx. 5 wallsBrick walls / aerated concrete: approx. 20 m; approx. 3 wallsMounting:Flush-mounted, without housing,Screw or sticking fasteningColor: white, bright surface

Brand: Wieland Electric GmbHType: RC S-SRWSCSPart No.: F0.000.0024.6

gesis® RC hotel-card-switch, piano black

System gesis® RC - Energy self-sufficient, piano black hotel-card-switch for storage and simultaneous sending of an EnOcean telegram. Together with suitable actuators from the gesis® RC device series, the power supply of the room can be operated directly or the signal can be transmitted to the building automation.


Brand: Wieland Electric GmbHType: RC S-SRSWCSPart No.: F0.000.0024.7

gesis® RC hotel-card-switch, aluminum

System gesis® RC - Energy self-sufficient, aluminum hotel-card-switch for storage and simultaneous sending of an EnOcean telegram. Together with suitable actuators from the gesis® RC device series, the power supply of the room can be operated directly or the signal can be transmitted to the building automation.


Page 96/110


Brand: Wieland Electric GmbHType: RC S-SRALCSPart No.: F0.000.0024.8

Page 97/110


5.11 Accessories

gesis® RC repeater

System gesis® RC - The repeater receives EnOcean telegrams and sends these as they are with maximum transmitting power, either in 1 or 2-level operation. This amplifies the radio signal twice at the maximum and enhances the radio range significantly.

Transmission/Receiving frequency: 868.3 MHzTransmission protocol: EnOceanNominal range: 300 m on free fieldLine of sight: approx. 50 m in floors, approx. 200 m in hallsPlasterboard / dry wood: approx. 30 m; approx. 5 wallsBrick walls / aerated concrete: approx. 20 m; approx. 3 wallsSupply voltage: 230 V ACType of protection: IP20Mounting: flush-mounted e.g. in 55 mm outlet socket

Brand: Wieland Electric GmbHType: RC A-SRGN2LPart No.: F0.000.0024.5

gesis® RC antenna 868 MHz SMA male

System gesis® RC - The antenna with SMA socket is for 868 MHz nominal frequency. The black antenna can be mounted using a magnetic foot and has a 2.5 m connection cable.

Transmission frequency: 868.3 MHzConnection: SMA angle male plugCable length: 2.5 mMounting: magnet baseDimension: 28.5 mm base diameter, 117 mm antenna heightColor: black

Brand: Wieland Electric GmbHType: RC A-A1SWL25Part No.: 83.020.0503.0

Page 98/110


6 gesis® – Applications designed to be pluggable

gesis® DALI presence detector master

System gesis® - The DALI presence detector master is a DALI-based multi sensor (PIR) with four separate lighting zones whereat zones 1-3 are daylight-controlled and the fourth zone is only switched on/off. The lighting can be controlled via an IR remote control or automatically. All electrical connections are pluggable and provided with a pre-assembled 0.5 m cable.

Nominal voltage: 230 V, 50 HzNominal standby load: < 1 WConnection cable: pluggable with pre-fabricated cable 5x1,5 mm², 0,5 m, halogen freeCoding: GST18i5, pastel blue, maleOutput: DALI (64 DALI ballasts in 4 groups, 3x dimmed, 1x switched)Detection area:12.0 m diameter at mounting height 3.0 m8.0 m diameter at mounting height 2,4 mLux sensing range: 100 - 1000 lxMounting location: CeilingType of protection: IP20Housing material: halogen freeHousing color: whiteDimension (visible) in mm: 95x100 (DxH)

Brand: Wieland Electric GmbHType: P CLS-DALI-31Part No.: 83.020.0115.1

gesis® DALI presence detector slave

System gesis® - The DALI presence detector slave is a DALI-based multi sensor (PIR) to increase the detection area of a DALI presence detector master (P CLS-DALI-31). He is installed to the DALI system in parallel to the master. All electrical connections are pluggable and provided with a pre-assembled 0.5 m cable.

Nominal voltage: 230 V, 50 HzNominal standby load: < 1 WConnection cable: pluggable with pre-fabricated cable 5x1,5 mm², 0,5 m, halogen freeCoding: GST18i5, pastel blue, maleOutput: DALI (64 DALI ballasts in 4 groups, 3x dimmed, 1x switched)Detection area:12.0 m diameter at mounting height 3.0 m8.0 m diameter at mounting height 2,4 mLux sensing range: 100 - 1000 lxMounting location: CeilingType of protection: IP20Housing material: halogen freeHousing color: whiteDimension (visible) in mm: 95x100 (DxH)

Brand: Wieland Electric GmbHType: P MS-DALI-SLPart No.: 83.020.0116.1

gesis® distribution block, 5-pole, 1 input, 2 outputs, 250 V, 20 A, pastel blue

System gesis® CON - Distribution block for installation connectors according to IEC 61535, for dimming applications, T-shaped distribution block, 5-pole, turned contacts, 1 input, 2 outputs, with integrated locking on two sides, mechanical coding code 2, color coding pastel blue.

Page 99/110


Rated voltage: 250 VRated current: 20 ARated impulse voltage: 4 kVType of protection (plugged): IP40Type of protection (unplugged): IP20Housing material: PolyamideInput: 1Outputs: 2Halogen-free: yes

Brand: Wieland Electric GmbH Type: GST18i5 V 2P1 T V PB02Part No.: 92.050.1453.1

gesis® Switching presence detector master with direct luminaire connection

System gesis® - The switching presence detector master is a multi sensor (PIR) to control one lighting group. The supply is realized via a connection cable, 0.5 m with black GST18i3 male plug. The output occurs via a connection cable, 0.5 m with black GST18i3 female plug. The lighting group can be controlled by an IR remote control or automatically.

Nominal voltage: 230 V, 50 HzSwitching current: 10 AConnection cable (supply): pluggable with pre-fabricated cable 3x1.5 mm², 0.5 m, halogen freeCoding (supply): GST18i3, black, maleConnection cable (output): pluggable with pre-fabricated cable 3x1.5 mm², 0.5 m, halogen freeCoding (output): GST18i3, black, femaleDetection area:12.0 m diameter at mounting height 3.0 m8.0 m diameter at mounting height 2.4 mLux sensing range: 100 - 1000 lxMounting location: CeilingType of protection: IP20Housing material: halogen freeHousing color: whiteDimension (visible) in mm: 95x100 (DxH)

Brand: Wieland Electric GmbHType: P MS8-360-1LPart No.: 83.020.0110.1

gesis® Switching presence detector master for connecting a cross connect

System gesis® - The switching presence detector master is a multi sensor (PIR) to control one lighting group. The supply is realized via a connection cable, 0.5 m with brown GST18i3 male plug that also returns the switch signal. The lighting group can be controlled by an IR remote control or automatically.

Nominal voltage: 230 V, 50 HzSwitching current: 10 AConnection cable: pluggable with pre-fabricated cable 3x1.5 mm², 0.5 m, halogen freeCoding: GST18i3, brown, maleDetection area:12.0 m diameter at mounting height 3.0 m8.0 m diameter at mounting height 2.4 mLux sensing range: 100 - 1000 lxMounting location: CeilingType of protection: IP20Housing material: halogen freeHousing color: whiteDimension (visible) in mm: 95x100 (DxH)

Page 100/110


Brand: Wieland Electric GmbHType: P MS8-360-1LbPart No.: 83.020.0110.2

gesis® Cross connect block motion detector with mounting option, 3-pole, 250 V, 20 A, black/brown

System gesis® CON - Distribution block for installation connectors according to IEC 61535, HH-shaped distribution block, 3-pole, turned contacts, for motion detector applications, with mounting option, with integrated locking, mechanical coding code 1/4, color coding black/brown.

Rated voltage: 250 VRated current: 20 ARated impulse voltage: 4 kVType of protection (plugged): IP40Type of protection (unplugged): IP20Housing material: PolyamideInput: 1, Code 1, blackForwarding: 1, Code 1, blackMotion detector connection: 1, code 4, brownLuminaire connection: 2, Code 1, schwarzHalogen-free: yes

Brand: Wieland Electric GmbH Type: GST18i3 VS2G1 V B SW Part No.: 92.030.0153.1

gesis® Switching presence detector master for connecting a slave

System gesis® - The switching presence detector master is a multi sensor (PIR) to control one lighting group. The supply is realized via a connection cable, 0.5 m with black GST18i3 male plug. The output and the feed back signal of the slave occur via a connection cable, 0.5 m with black GST18i5 female plug. The lighting group can be controlled by an IR remote control or automatically.

Nominal voltage: 230 V, 50 HzSwitching current: 10 AConnection cable (supply): pluggable with pre-fabricated cable 3x1.5 mm², 0.5 m, halogen freeCoding (supply): GST18i3, black, maleConnection cable (output): pluggable with pre-fabricated cable 5x1.5 mm², 0.5 m, halogen freeCoding (output): GST18i5, black, femaleDetection area:12.0 m diameter at mounting height 3.0 m8.0 m diameter at mounting height 2.4 mLux sensing range: 100 - 1000 lxMounting location: CeilingType of protection: IP20Housing material: halogen freeHousing color: whiteDimension (visible) in mm: 95x100 (DxH)

Brand: Wieland Electric GmbHType: P MS8-360-1LSLPart No.: 83.020.0110.3

gesis® Switching presence detector slave with direct luminaire connection

System gesis® - The switching presence detector slave is a multi sensor (PIR) to control one lighting group in combination with an upstream master. The supply and presence signal is realized via a connection cable, 0.5 m with black GST18i5 male plug. The output occurs via a connection cable with black GST18i3 female plug. The lighting group can be controlled by an IR remote control or automatically.

Page 101/110


Nominal voltage: 230 V, 50 HzConnection cable (supply): pluggable with pre-fabricated cable 5x1.5 mm², 0.5 m, halogen freeCoding (supply): GST18i5, black, maleConnection cable (output): pluggable with pre-fabricated cable 3x1.5 mm², 0.5 m, halogen freeCoding (output): GST18i3, black, femaleDetection area:12.0 m diameter at mounting height 3.0 m8.0 m diameter at mounting height 2.4 mLux sensing range: 100 - 1000 lxMounting location: CeilingType of protection: IP20Housing material: halogen freeHousing color: whiteDimension (visible) in mm: 95x100 (DxH)

Brand: Wieland Electric GmbHType: P MS8-360-SLbPart No.: 83.020.0111.1

gesis® Switching presence detector slave with connection for further slave

System gesis® - The switching presence detector slave is a multi sensor (PIR) to control one lighting group in combination with an upstream master. The supply and presence signal is realized via a connection cable, 0.5 m with black GST18i5 male plug. The output and downstream presence signal occurs via a connection cable, 0.5 m with black GST18i5 female plug. The lighting group can be controlled by an IR remote control or automatically.

Nominal voltage: 230 V, 50 HzConnection cable (supply): pluggable with pre-fabricated cable 5x1.5 mm², 0.5 m, halogen freeCoding (supply): GST18i5, black, maleConnection cable (output): pluggable with pre-fabricated cable 5x1.5 mm², 0.5 m, halogen freeCoding (output): GST18i5, black, femaleDetection area:12.0 m diameter at mounting height 3.0 m8.0 m diameter at mounting height 2.4 mLux sensing range: 100 - 1000 lxMounting location: CeilingType of protection: IP20Housing material: halogen freeHousing color: whiteDimension (visible) in mm: 95x100 (DxH)

Brand: Wieland Electric GmbHType: P MS8-360-SLSLPart No.: 83.020.0111.2

gesis® IR transmitter for commissioning and operating the gesis® presence detector

System gesis® - The remote control is required for setting the presence detector (DALI or switching) functions, e.g. delay times, lighting levels or the assignment of DALI groups. It can be used for any number of detectors.

Battery type: CR2025IR frequency 38 kHzRange: 10 mNumber of buttons: 21Type of protection: IP20Housing color: silver/blackDimension in mm: 85x40x6 (HxWxD)

Page 102/110


Brand: Wieland Electric GmbHType: PIR IR B-21 IPDPart No.: 83.020.0122.0

gesis® IR transmitter for operating the gesis® presence detector

System gesis® - The remote control permits the user to operate the assigned presence or movement detectors (DALI or switching), and hence temporarily change the dimming value, for example.

Battery type: CR2025IR frequency 38 kHzRange: 10 mNumber of buttons: 21Type of protection: IP20Housing color: silver/blackDimension in mm: 85x40x6 (HxWxD)

Brand: Wieland Electric GmbHType: PIR IR B-04 IPDPart No.: 83.020.0122.1

gesis® Surge protector, GST18i3, type 3, optical

System gesis® CON - The pluggable type 3 surge protector is according to EN 61643-11+A11 CE-conform and fits into the GST18i3 system from Wieland. It is directly integrated in a pluggable housing and will be used close to electronic devices while plug it into e.g. a Wieland connected socket outlet in an office desk. The surge protector has an optical failure indication. Defective modules are indicated by a switched on glow lamp. By the use of the pluggable system the necessary replacement is easy. Mechanical coding code 1, color coding black.

Housing color: grayHalogen-free: yes

Brand: Wieland Electric GmbH Type: GST18i3 UE OPart No.: 84.990.1242.0

gesis® Surge protector, GST18i3, type 3, acoustic

System gesis® CON - The pluggable type 3 surge protector is according to EN 61643-11+A11 CE-conform and fits into the GST18i3 system from Wieland. It is directly integrated in a pluggable housing and will be used close to electronic devices while plug it into e.g. a Wieland connected socket outlet in an office desk. The surge protector has an acoustic failure indication. Defective modules are indicated by a buzzer. By the use of the pluggable system the necessary replacement is easy. Mechanical coding code 1, color coding black.

Housing color: grayHalogen-free: yes

Brand: Wieland Electric GmbH Type: GST18i3 UE APart No.: 84.990.1243.0

gesis® Transformer GST18i3/ST16/2 35-105 W

System gesis® CON - Electronic transformer ST16 with pre-fabricated GST18i3 cable on primary side and pre-fabricated ST16/2 cable on secondary side, with a nominal primary voltage of 230 V and nominal secondary voltage of 11.8 V, load range 35-105 W.

Page 103/110


Nominal voltage (primary): 230 V / 50 - 60 HzNominal current (primary): 0.45 ANominal voltage (secondary): 11.8 VNominal load (secondary): 35…105 WShort-circuit protection: Electronic, automatic restartConnectors:Primary side: GST18i3, whiteSecondary side: ST16/2 BSHousing color: whiteDimension in mm: 175x42x18 (HxWxD)

Brand: Wieland Electric GmbH Type: TR GST18/ST17Part No.: 99.449.9999.9

Page 104/110


7 gesis® ELECTRONIC IP+ – EnOcean Receiver and LED control gear IP68

7.1 EnOcean Receiver

gesis® RC radio based switching output 4-fold, IP68

System gesis® RC - The EnOcean switching output has an IP68 housing for surface mounting with four independent relay outputs as well as a forwarded main supply and can be controlled by up to 30 EnOcean pushbuttons. All electrical connections are pluggable.

Receiving frequency: 868.3 MHzTransmission protocol: EnOceanMain supply:Nominal voltage: 230 V, 50...60 HzNominal current: 16 AConnection: pluggableOutputs:Count: 4Type: normally open 1-pole, phase switchedNominal voltage: 230 V, 50...60 HzNominal load: each output max. 6 A ohmic loadConnection: pluggable1 through wiringNominal voltage: 230 V, 50...60 HzNominal current: 20 AConnection: pluggable, 2-fold parallelMounting: on-wall, screw fasteningType of protection: IP68Housing: halogen-freeFire behavior: UL 94-V-2Housing color: blackDimension in mm: 96x104x162 (HxWxL)

Brand: Wieland Electric GmbHType: RC RST-0/4Part No.: 83.020.0505.0

Page 105/110


7.2 Constant current generator

gesis® ELECTRONIC IP+ constant current generator 350 mA DC

System gesis® ELECTRONIC IP+ - The power supply in IP68 surface-mounted housing is suitable for the connection of LED applications with a nominal current of 350 mA. The power supply delivers up to 12 Watts of power and has a through-wired power supply. All electrical connections are pluggable.

Main supply:Nominal voltage: 230 V, 50...60 HzNominal current: 16 AConnection: pluggableOutputs:1 mains output, through wiring1 LED outputNominal current: 350 mA DCNominal load: 12 WConnections: steckbar

Ambient temperature: -25 °C up to +55 °CMounting: on-wall, screw fasteningType of protection: IP68Housing: halogen-freeFire behavior: UL 94-V-2Housing color: blackDimension in mm: 96x104x162 (HxWxL)

Brand: Wieland Electric GmbHType: RST PSI 350/12 LEDPart No.: 83.020.0902.0

gesis® ELECTRONIC IP+ constant current generator 700 mA DC

System gesis® ELECTRONIC IP+ - The power supply in IP68 surface-mounted housing is suitable for the connection of LED applications with a nominal current of 700 mA. The power supply delivers up to 12 Watts of power and has a through-wired power supply. All electrical connections are pluggable.

Main supply:Nominal voltage: 230 V, 50...60 HzNominal current: 16 AConnection: pluggableOutputs:1 mains output, through wiring1 LED outputNominal current: 700 mA DCNominal load: 12 WConnections: steckbar

Ambient temperature: -25 °C up to +55 °CMounting: on-wall, screw fasteningType of protection: IP 68Housing: halogen-freeFire behavior: UL 94-V-2Housing color: blackDimension in mm: 96x104x162 (HxWxL)

Brand: Wieland Electric GmbHType: RST PSI 700/12 LEDPart No.: 83.020.0903.0

Page 106/110


7.3 Constant voltage generator

gesis® ELECTRONIC IP+ constant voltage generator 12 V DC

System gesis® ELECTRONIC IP+ - The power supply in IP68 surface-mounted housing is suitable for the connection of LED applications with a nominal voltage of 12 V. The power supply delivers up to 12 Watts of power and has a through-wired power supply. All electrical connections are pluggable.

Main supply:Nominal voltage: 230 V, 50...60 HzNominal current: 16 AConnection: pluggableOutputs:1 mains output, through wiring1 LED outputNominal voltage: 12 V DCNominal load: 12 WConnections: steckbar


Brand: Wieland Electric GmbHType: RST PSU 12/12 LEDPart No.: 83.020.0900.0

gesis® ELECTRONIC IP+ constant voltage generator 24 V DC

System gesis® ELECTRONIC IP+ - The power supply in IP68 surface-mounted housing is suitable for the connection of LED applications with a nominal voltage of 24 V. The power supply delivers up to 12 Watts of power and has a through-wired power supply. All electrical connections are pluggable.

Main supply:Nominal voltage: 230 V, 50...60 HzNominal current: 16 AConnection: pluggableOutputs:1 mains output, through wiring1 LED outputNominal voltage: 24 V DCNominal load: 12 WConnections: steckbar


Brand: Wieland Electric GmbHType: RST PSU 24/12 LEDPart No.: 83.020.0901.0

Page 107/110


7.4 Transformer for low-voltage halogen luminaires

gesis® ELECTRONIC IP+ transformer for low-voltage halogen luminaires 12 V AC

System gesis® ELECTRONIC IP+ - The electronic transformer in IP68 surface-mounted housing is suitable for the connection of low-voltage halogen luminaire applications with a nominal voltage of 12 V. The power supply delivers 20 - 70 Watts of power and has a through-wired power supply. All electrical connections are pluggable.

Main supply:Nominal voltage: 230 V, 50...60 HzNominal current: 16 AConnection: pluggableOutputs:1 mains output, through wiring1 output for low-voltage halogen luminairesNominal voltage: 12 V ACNominal load: 20-70 WConnections: steckbar

Ambient temperature: 0 °C up to +45 °CMounting: on-wall, screw fasteningType of protection: IP68Housing: halogen-freeFire behavior: UL 94-V-2Housing color: blackDimension in mm: 96x104x162 (HxWxL)

Brand: Wieland Electric GmbHType: RST PSU 12/70 LVHPart No.: 83.020.0904.0

Page 108/110


7.5 Accessories

gesis® Cover piece IP66/68 for male, 2-3-pole, captive against loss, black

System gesis® IP+ - Cover piece IP66/68 for male parts RST20i2 and RST20i3, captive against loss, black.

Housing material: PA66, V2Sealing material: NBRHalogen-free: yes

Brand: Wieland Electric GmbH Type: RST20I2 VS SWPart No.: 99.416.6205.2

gesis® Cover piece IP66/68 for male, 2-3-pole, black

System gesis® IP+ - Cover piece IP66/68 for male parts RST20i2 and RST20i3, black.



gesis® Cover piece IP66/68 for female, 2-3-pole, captive against loss, black

System gesis® IP+ - Cover piece IP66/68 for female parts RST20i2 and RST20i3, with locking, captive against loss, black.



gesis® Cover piece IP66/68 for female, 2-3-pole, black

System gesis® IP+ - Cover piece IP66/68 for female parts RST20i2 and RST20i3, with locking, black.


Brand: Wieland Electric GmbH Type: RST20I2 VS SWPart No.: Z5.564.4553.1

Page 109/110


05.564.4453.1............10983.020.0110.1............10083.020.0110.2............10183.020.0110.3............10183.020.0111.1............10283.020.0111.2............10283.020.0115.1..............9983.020.0116.1..............9983.020.0122.0............10383.020.0122.1............10383.020.0212.0..............5583.020.0212.4..............5683.020.0213.0..............5783.020.0213.4..............5783.020.0214.0..............5283.020.0221.0..............5383.020.0221.4..............5383.020.0222.4..............5483.020.0225.0..............5183.020.0225.4..............5283.020.0400.3..............4083.020.0401.0..............4183.020.0402.0..............4283.020.0403.0..............4383.020.0404.0..............4483.020.0405.0..............4583.020.0406.0..............4783.020.0407.0..............4483.020.0408.0........49, 8083.020.0409.0..............4583.020.0410.0..............4683.020.0411.0..............4783.020.0412.0..............4883.020.0421.0..............4183.020.0500.0..............7283.020.0500.2..............7383.020.0501.1..............7383.020.0501.2..............7483.020.0503.0........50, 9883.020.0505.0......75, 10583.020.0506.0..............7683.020.0600.0................283.020.0600.1................383.020.0601.0................483.020.0601.1................483.020.0610.0................583.020.0610.1................583.020.0611.0................6

83.020.0611.1................683.020.0622.0................783.020.0622.1................883.020.0623.0................983.020.0623.1..............1083.020.0624.0..............1683.020.0624.1..............1783.020.0626.0..............1083.020.0626.1..............1183.020.0627.0..............1883.020.0627.1..............1983.020.0628.0........26, 7983.020.0628.1........27, 8083.020.0630.0..............1383.020.0630.1..............1483.020.0631.0..............2283.020.0631.1..............2383.020.0632.0..............2383.020.0632.1..............2483.020.0633.0..............2483.020.0633.1..............2583.020.0634.0..............1783.020.0634.1..............1883.020.0635.0..............2083.020.0635.1..............2183.020.0636.0..............1183.020.0636.1..............1283.020.0637.0..............1983.020.0637.1..............2083.020.0638.0..............2883.020.0638.1..............2983.020.0639.0..............2983.020.0639.1..............3083.020.0640.0..............3683.020.0640.1..............3783.020.0641.0..............1483.020.0641.1..............1583.020.0660.0..............3183.020.0661.0..............3183.020.0662.0..............3283.020.0663.0..............3283.020.0900.0............10783.020.0901.0............10783.020.0902.0............10683.020.0903.0............10683.020.0904.0............10883.020.1413.0..............6883.020.1414.0..............68

83.020.1415.0..............6983.020.1416.0..............6983.020.1417.0..............7083.020.1418.1..............6984.990.1242.0............10384.990.1243.0............10391.257.0500.2..............3491.257.1000.2..............3492.030.0153.1............10192.050.1453.1............10099.061.9999.9..............3999.400.9999.8..............3499.401.9999.8..............3599.404.9999.8..............3999.405.9999.8..............3999.414.6205.2............10999.416.6205.2............10999.449.9999.9............104F0.000.0005.6..............82F0.000.0005.7..............84F0.000.0005.8..............83F0.000.0005.9..............85F0.000.0007.5..............82F0.000.0007.6..............83F0.000.0007.7..............83F0.000.0007.8..............84F0.000.0007.9..............85F0.000.0008.0..............85F0.000.0008.1..............86F0.000.0008.2..............86F0.000.0008.3..............70F0.000.0009.0..............78F0.000.0009.1..............81F0.000.0009.2..............81F0.000.0009.3..............81F0.000.0016.9..............77F0.000.0017.3..............64F0.000.0024.5..............98F0.000.0024.6..............96F0.000.0024.7..............96F0.000.0024.8..............97F0.000.0025.0..............87F0.000.0025.1..............90F0.000.0025.2..............88F0.000.0025.3..............91F0.000.0025.4..............89F0.000.0025.5..............93F0.000.0025.6..............94

F0.000.0025.7..............94F0.000.0025.8..............95F0.000.0025.9..............87F0.000.0026.0..............91F0.000.0026.1..............88F0.000.0026.2..............92F0.000.0026.3..............90F0.000.0026.4..............93F0.000.0026.5..............94F0.000.0026.6..............94F0.000.0026.7..............95F0.000.0026.8..............88F0.000.0026.9..............91F0.000.0027.0..............89F0.000.0027.1..............92F0.000.0027.2..............90F0.000.0027.3..............93F0.000.0027.4..............94F0.000.0027.5..............94F0.000.0027.6..............95F0.000.0032.0..............65F0.000.0032.1..............65F0.000.0032.3..............66F0.000.0032.4..............66F0.000.0032.5..............67F0.000.0032.6..............66F0.000.0032.7..............66F0.000.0033.8..............70F0.000.0034.5..............59F0.000.0034.6..............60F0.000.0034.7..............60F0.000.0034.8..............61F0.000.0034.9..............61F0.000.0038.3..............62F0.000.0038.4..............62F0.000.0038.5..............63G0.000.0667.2..............33G0.000.0667.3..............33Z5.524.1410.0..............37Z5.524.1510.0..............37Z5.524.1610.0..............37Z5.524.1710.0..............38Z5.524.1810.0..............38Z5.524.1910.0..............38Z5.524.2010.0..............38Z5.564.4553.1............109

Page 110/110

Documents

gesis ELECTRONIC · Web view® FLEX is designed for decentral installation without further housing. A device always consists of a base module and expansion modules. The modules can