GENERAL INDEX CATALOGUE 2009 - · PDF file3 general index catalogue 2009 • g.p.v.3300 4 • g.p.v.2200 5 • g.p.v.1500 6

2

3

GENERAL INDEX CATALOGUE 2009

• G.P.V.3300 4

• G.P.V.2200 5

• G.P.V.1500 6

• G.P.V.1000 7

• G.P.V.750 8

• G.P.V.500 9

• G.P.V.350 10

• G.P.V.280 11

• G.P.V.250 12

• G.P.V.200/180 13

• Vacuum pumps and spare parts mod. AL 14

• Vacuum meter and valves 15

• Vacuum cocks 16

• Vanes for vacuum pumps 17

• Oil feeder 18

• Drip feed system 19

• Tanks Lt. 110/85/65/45 20

• Tanks Lt. 28/22 and wall bracket 21

• Vertical and horizontal balancing tank 22

• Cardan joint, cartridge filter and particolar in rubber 23

• Adiprene sleeves and caps 24

• Silencers and separators 25

• Pulleys for motors 26

• Pulleys for pumps and belts 27

• Belt stretcher slides , belt protection and bracket for tank 28

• Brackets for tank and complete floor brackets 29

• Electric motors and condenser for one-phase motor 30

• Flow meter, accessories and oil 31

ARTICLE DESCRIPTION PAGE

4

G.P.V. 3300

Ref.1000322

G.P.V. 3300 with normal oiler (capillar system)

1000300 P.V. 3300 ONLY PUMP complete

1000301 G.P.V. 3300 ON BRACKET Hp.7,5 - Lt/min. 2700

1000302 G.P.V. 3300 ON BRACKET Hp. 7,5 - Lt/min. 2950

1000303 G.P.V. 3300 ON BRACKET Hp. 10 - Lt/min.3300

1000304 G.P.V. 3300 ON BRACKET without electric motor

1000305 G.P.V. 3300 ON TANK Lt. 110 Hp.7,5 - Lt/min. 2700

1000306 G.P.V. 3300 ON TANK Lt. 110 Hp. 7,5 - Lt/min. 2950

1000307 G.P.V. 3300 ON TANK Lt. 110 Hp. 10 - Lt/min.3300

1000308 G.P.V. 3300 ON TANK Lt. 110 without electric motor

G.P.V. 3300 with drip oil system (look the pag. 18)


1000311 G.P.V. 3300 ON BRACKET Hp.7,5 - Lt/min. 2700

1000312 G.P.V. 3300 ON BRACKET Hp. 7,5 - Lt/min. 2950

1000313 G.P.V. 3300 ON BRACKET Hp. 10 - Lt/min.3300


1000321 G.P.V. 3300 ON TANK LT 110 Hp.7,5 - Lt/min. 2700

1000322 G.P.V. 3300 ON TANK LT 110 Hp. 7,5 - Lt/min. 2950

1000323 G.P.V. 3300 ON TANK LT 110 Hp. 10 - Lt/min.3300

1000324 G.P.V. 3300 ON TANK LT 110 without electric motor

P.V. 3300 Nuda

1001300 P.V. 3300 ONLY PUMP nacked

REF. NUMBER DESCRIPTION

• Exit tank: Lt. 110 4" - 110 mm

• In the order of G.P.V. without electric motor please specificate wich type of electric

motor do you will to install, for supply to you the right pulley motor.

Specification:

5

G.P.V. 2200

G.P.V. 2200 with normal oiler (capillar system)


1000101 G.P.V. 2200 A ON BRACKET Hp. 5,5 - Lt/min. 1800

1000102 G.P.V. 2200 B ON BRACKET Hp. 5,5 - Lt/min. 2000

1000103 G.P.V. 2200 C ON BRACKET Hp. 7,5 - Lt/min. 2300


1000105 G.P.V. 2200 D ON TANK Lt. 85 Hp. 5,5 - Lt/min. 1800

1000106 G.P.V. 2200 E ON TANK Lt. 85 Hp. 5,5 - Lt/min. 2000

1000107 G.P.V. 2200 F ON TANK Lt. 85 Hp. 7,5 - Lt/min. 2300




1000132 G.P.V. 2200 ON TANK Lt. 110 Hp. 7,5 - Lt/min.2300


G.P.V. 2200 with drip oil sistem (look the pag. 18)


1000111 G.P.V. 2200 A ON BRACKET Hp. 5,5 - Lt/min. 1800

1000112 G.P.V. 2200 B ON BRACKET Hp. 5,5 - Lt/min. 2000

1000113 G.P.V. 2200 C ON BRACKET Hp. 7,5 - Lt/min. 2300


1000115 G.P.V. 2200 D ON TANK Lt. 85 Hp. 5,5 - Lt/min. 1800

1000116 G.P.V. 2200 E ON TANK Lt. 85 Hp. 5,5 - Lt/min. 2000

1000117 G.P.V. 2200 F ON TANK Lt. 85 Hp. 7,5 - Lt/min. 2300




1000136 G.P.V. 2200 ON TANK Lt. 110 Hp. 7,5 - Lt/min.2300


P.V. 2200 NACKED



• Exit tank: Lt. 110 4" - 110 mm/Lt. 85 3" - 90 mm



Specification:

Ref.1000103

6

G.P.V. 1500

G.P.V. 1500



1000021 G.P.V. 1500 A ON BRACKET Hp.5,5 - Lt/min. 1450

1000022 G.P.V. 1500 B ON BRACKET Hp.4 - Lt/min. 1300


1000024 G.P.V. 1500 C ON TANK Lt. 65. Hp.5,5 - Lt/min. 1450

1000025 G.P.V. 1500 D ON TANK Lt. 65. Hp.4 - Lt/min. 1300


1000027 G.P.V. 1500 E ON TANK Lt. 85. Hp.5,5 - Lt/min. 1450

1000028 G.P.V. 1500 F ON TANK Lt. 85. Hp.4 - Lt/min. 1300


G.P.V. 1500 optional

2000011 Separator oil/air 2" d. 25 mm

2000102 Cardan Joint G.P.V. 1500/1000


• Exit tank: Lt. 85 3" - 90 mm/ Lt. 65 2" - 63 mm



Specification:

Ref.1000024

7

G.P.V. 1000

G.P.V.1000



1000031 G.P.V. 1000 A ON BRACKET Hp.4 - Lt/min. 1000


1100032 G.P.V. 1000 B ON BRACKET Hp.3 220v - Lt/min. 900


1000034 G.P.V. 1000 C ON TANK Lt. 65. Hp.4 - Lt/min. 1000


1100035 G.P.V. 1000 D ON TANK Lt. 65. Hp.3 220v - Lt/min. 900


1000037 G.P.V. 1000 E ON TANK Lt. 85. Hp.4 - Lt/min. 1000

1000038 G.P.V. 1000 F ON TANK Lt. 85. Hp.3 - Lt/min. 900

1100038 G.P.V. 1000 F ON TANK Lt. 85. Hp.3 220v - Lt/min. 900


G.P.V. 1000 optional

2000011 Separator oil/air 2" d. 25 mm

2000102 Cardan Joint G.P.V. 1500/1000


• Exit tank: Lt. 85 3" - 90 mm/ Lt. 65 2" - 63 mm



Specification:

Ref.1000031

8

G.P.V. 750

G.P.V.750



1000041 G.P.V. 750 A ON BRACKET Hp.3 - Lt/min. 750

1100041 G.P.V. 750 A ON BRACKET Hp.3 220v - Lt/min. 750


1100042 G.P.V. 750 B ON BRACKET Hp.2 220v - Lt/min. 600


1000044 G.P.V. 750 C ON TANK Lt. 65. Hp.3 - Lt/min. 750

1100044 G.P.V. 750 C ON TANK Lt. 65. Hp.3 220v - Lt/min. 750


1100045 G.P.V. 750 D ON TANK Lt. 65. Hp.2 220v - Lt/min. 600


1000047 G.P.V. 750 E ON TANK Lt. 28 Hp.2 - Lt/min. 600

1100047 G.P.V. 750 E ON TANK Lt. 28 Hp.2 220v - Lt/min. 600

1000048 G.P.V. 750 F ON TANK Lt. 28 without electric motor

G.P.V. 750 optional

2000101 Cardan Joint G.P.V. 750/500

2000012 Separator oil/air 1"1/4 d. 23 mm


Ref.1000044

9

G.P.V. 500

Ref.1000054

G.P.V.500



1000051 G.P.V. 500 A ON BRACKET Hp.2

1100051 G.P.V. 500 A ON BRACKET Hp.2 220v


1000054 G.P.V. 500 B ON TANK Lt. 65 Hp.2

1100054 G.P.V. 500 B ON TANK Lt. 65 Hp.2 220v

1000055 G.P.V. 500 C ON TANK Lt. 28. Hp.2

1100055 G.P.V. 500 C ON TANK Lt. 28. Hp.2 220v

1000056 G.P.V. 500 ON TANK Lt. 65. without electric motor


G.P.V. 500 optional


2000012 Separator oil/air 1"1/4 d. 23 mm


10

G.P.V. 350

G.P.V.350 lubrificate



1000061 G.P.V. 350 A ON TANK Lt. 45 Hp.1,5

1100061 G.P.V. 350 A ON TANK Lt. 45 Hp.1,5 220v


1000065 G.P.V. 350 B ON TANK Lt. 28 Hp.1,5

1100065 G.P.V. 350 B ON TANK Lt. 28 Hp.1,5 220v


1000063 G.P.V. 350 C ON BRACKET Hp.1,5


G.P.V. 350 lubrificate optional


2000104 With one-phase electric motor hp. 1,5


Ref.1000061

11

G.P.V. 250

G.P.V.250 lubrificate



1000071 G.P.V. 250 ON TANK Lt. 28 Hp.1,5

1100071 G.P.V. 250 ON TANK Lt. 28 Hp.1,5 220v


G.P.V. 250 lubrificate optional


2000104 With one-phase electric motor hp. 1,5

NEW N. REF. DESCRIPTION

Ref.100071

12

G.P.V. 280

Ref.1000

G.P.V. 280 one-phase 220V

1000080 E.P.V. 280 FS. ELECTROPUMP DRY

1000081 E.P.V. 280 FL. ELECTROPUMP LUBRIFICATE

1000082 G.P.V. 280 FS. ON TANK Lt. 22 DRY

1000083 G.P.V. 280 FL. ON TANK Lt. 22 LUBRIFICATE

1000084 G.P.V. 280 FS. ON TANK Lt. 22 DRY - TYPE MOBIL

1000086 G.P.V. 280 FL. ON TANK Lt. 22 LUBR. - TYPE MOBIL

G.P.V. 280 three-phase 380V

1100080 E.P.V. 280 FS. ELECTROPUMP DRY

1100081 E.P.V. 280 FL. ELECTROPUMP LUBRIFICATE

1100082 G.P.V. 280 FS. ON TANK Lt. 22 DRY

1100083 G.P.V. 280 FL. ON TANK Lt. 22 LUBRIFICATE

1100084 G.P.V. 280 FS. ON TANK Lt. 22 DRY - TYPE MOBIL

1100086 G.P.V. 280 FL. ON TANK Lt. 22 LUBR. - TYPE MOBIL


G.P.V. 280 optional

200/110 2000110 Vacuum valve brass 1" and vacuum meter d.63 mm

13

G.P.V. 200/180

Ref.1000091


1000090 E.P.V. 200 F ONLY ELECTROPUMP DRY

1000091 G.P.V. 200 F ELECTROPUMP ON TANK Lt. 22 DRY

1000092 G.P.V. 200 ON TANK Lt. 22 TYPE MOBIL

G.P.V. 200 three-phase 380V

1100090 E.P.V. 200 F ONLY ELECTROPUMP DRY

1100091 G.P.V. 200 F ELECTROPUMP ON TANK Lt. 22 DRY



G.P.V. 200/180 optional

200/110 2000110 Vacuum valve brass 1" and vacuum meter d.63 mm


1000010 E.P.V. 180 ONLY ELECTROPUMP DRY

1000011 G.P.V. 180 ELECTROPUMP ON TANK Lt. 22 DRY


14

Vacuum Pumps and Spare Parts MOD. AL

G.P.V. 2200 AL

1000208 P.V. 2200 AL ONLY with PULLEY 180 2B and OILER

1000209 G.P.V. 2200 AL ON BRACKET Hp.5,5 - Lt/min. 1800



1000211 G.P.V. 2200 AL ON BRACKET without electric motor

• The AL pumps model have got the exit/down in the side;

• the exit/entry are all 2" and you have need a reduction gas 2"-1"1/2 ;

Annotation pump AL:

• all the pulley and belt are "size A" 13 mm.

G.P.V. 1500 AL

1000200 P.V. 1500 AL ONLY with PULLEY 160 2A and OILER


1000206 G.P.V. 1500 AL ON BRACKET Hp.4 - Lt/min. 1300


G.P.V. 1000 AL

1000201 P.V. 1000 AL ONLY with PULLEY 140 2A and OILER




Tank Lt. 65 for pump mod. AL Kevlar Vanes for VP18 Kevlar Vanes for VP74 Kevlar Vanes for VP76 Kevlar Vanes for VP77 Kevlar Vanes for VP78

6001002 5000081 5005426 5005427 5005428 5005429

15

VACUUM METER AND VALVE

Vacuum Meter Ø 63 - 3/8” Vacuum Meter Ø 100 - 1/2” Vacuum Meter Ø 160 - 1/2”

1) Plastic drainage valve 3/4" 1) Plastic drainage valve 1/2" 2) Brass spring vacuum regulator 3/4" 200 n.l./min. 3) Plastic spring vacuum regulator 3/4" 200 n.l./min.

5000030 5000032 5000033

5001034 5000034 5000066 5000065

1) Brass spring vacuum regulator 400 n.l./min. 2) Servac vacuum regulator 400 n.l./min. 3) Plastic spring vacuum regulator 500 n.l./min.

5000064 5000069 5000068

Servac Valve 1” 3500 n.l./min. Fullwood 1) Fullwood valve small membrane 2) Fullwood valve main membrane 3) Fullwood valve filter

5000350 5000310 5000309 5000308

16

VACUUM COCKS

1"1/4 - 1"1/2 nickel platwed ball cock Complete stainless steel connectrion Stainless steel pipe Stainless stell spring Curve flanged cock

5000035 5000040 5000049 5001049 5002049

Curve flanged cock 1" - 1" Curve flanged 1"1/4 - 1"1/2 Straight flanged cock 1" - 1" Straight flanged cock 1"1/4 - 1"1/2

5000036 5000037 5000038 5000039

Nickel plated straight threaded cock 1/2" Nickel plated curved threaded cock 1/2" Nickel plated straight threaded cock 3/8" Nickel plated curved threaded cock 3/8"

5000043 5000044 5000045 5000047

Stube pipe with 1/2" thred-pipe 1"1/4 - 1"1/2 Stube pipe with 1/2" thred-pipe 2" Stube pipe with 1/2" thred-pipe 1" - 3/4"

5000041 5000042 5000046

17

VANES FOR VACUUM PUMPS

Vanes for G.P.V.280 dry (65 x 50 x6) Vanes for G.P.V.250 dry (120 x 40 x 6) Vanes for G.P.V.3000 lubricate (215 x 68 x 8) Vanes for G.P.V.2000 lubricate (145 x 68 x 8) Vanes for G.P.V.1500 lubricate (164 x 65 x 6) Vanes for G.P.V.1000 lubricate (164 x 50 x 6) Vanes for G.P.V.750 lubricate (82 x 65 x 6) Vanes for G.P.V.500 lubricate (82 x 50 x 6)

5000070 5000071 5000074 5000075 5000076 5000077 5000078 5000079

Vanes for G.P.V.200 dry (70 x 45 x 6) Vanes for G.P.V.180 dry ( 70 x 43 x 5) Vanes for G.P.V.350 lubricate (120 x 45 x 5) Vanes for G.P.V.250 lubricate (120 x 40 x 5) Vanes for G.P.V.280 lubricate (65 x 50 x 6) Vanes for G.P.V.2200 lubricate (245 x 65 x 6) Vanes for G.P.V.3300 lubricate (289 x 87 x 6)

5000072 5000073 5000080 5000081 5000082 5000083 5000084

Vanes for CTA milk dry and oil pumps (measure in mm)

Vanes fitting at ALFA LAVAL e SAC/EFFECTIV pumps bakelite and kevlar

Vanes VP18 (120 x 40 x 4,6) Vanes VP74 (82,5 x 48,8 x 4,6) Vanes VP76 (152,3 x 48,8 x 4,6) Vanes VP77 (199,9 x 60,3 x 5,3) Vanes VP78 (203 x 76 x 6,23) Vanes VP74 (82,5 x 48,8 x 4,6) KEVLAR Vanes VP76 (152,3 x 48,8 x 4,6) KEVLAR

5000425 5000426 5000427 5000428 5000429 5005426 5005427

Vanes VP77 (199,9 x 60,3 x 5,3) KEVLAR Vanes VP78 (203 x 76 x 6,23) KEVLAR Vanes SAC 600 Lt. (82,4 x 51,1 x 4,7) Vanes SAC 1000 Lt. (152,4 x 51,1 x 4,7) Vanes SAC 1350 Lt. (152,3 x 51,1 x 4,9) Vanes SAC 1600 Lt. (225,5 x 49,1 x 4,7)

5005428 5005429 5000421 5000422 5000423 5000424

Vanes fitting at WESTFALIA e FULLWOOD pumps bakelite

Vanes fitting RPS (100 x 33 x 4,9) Vanes fitting RPS (150 x 33 x 4,9) Vanes fitting RPS (200 x 33 x 4,9) Vanes fitting RPS 2800 (325 x 80 x 7,9) Vanes fitting RPS 1500 - 2100

5000410 5001428 5001429 5000442 5000441

Vanes fitting RPS 2801 Vanes fitting FR 2 (117 x 44,5 x 4,5) Vanes fitting FR 3 (181 x 44,5 x 4,5) Vanes fitting FR 4 (278 x 44,5 x 4,5)

5000443 5000430 5000431 5000432

18

OIL FEDEER

Universal oil feeder 600 ml. for G.P.V. 250/280/350 Universal oil feeder 600 ml. for G.P.V. 500/750/1000 Universal oil feeder 600 ml. for G.P.V. 1500

5000100 5001100 5003100

Oil feeder double 600 ml. X 2 for G.P.V. 2200/3300 5002100

Oil feeder: 01) Fixing nut for oil fedeer 02) Washer d. 8 03) Lower plastic body 04) Brass nipples 05) Support board 06) Screw 07) Bolt 08) Suction tongue: 4 mm 6 mm 09) Fixing nut for set screw 10) Upper plastic body 11) Set screw 12) Plastic trasparent container

5000112 5000111 5000110 5000107 5000108 5000821 5000809 5000109 5001109 5000105 5000104 5000106 5000101

19

DRIP FEED SYSTEM

Drip feed system: 01) Set screw 02) Bolt 03) Bolt 8 x 7 mm 04) OR 05) Body oiler 06) Flat gascket 07) Glass body trasparent 08) Nipples 09) Drip feed lubricator 10) Wallsupport 11) Oil can Lt.10 12) Plug for jerrycan Ø 42 - 48 mm 13) S/S suction-pipes “U” bend 14) PVC trasparent tubing (0,70 mt) 15) S/S suction-pipes 30 mm + hole 1 mm 16) PVC trasparent tubing (2,70 mt)

5000808 5000809 5000810 2000551 5000811 5000812 5000813 5000814 5000802 5002801 3000614 5002803 5000816 5000805 5000818 5000805 5000107.01

Complete drip feed system for all kind of vacuum pumps existing: 1) Bracket (20 cm x 24 cm) with 2 drip feed lubricator 2) Bracket (20 cm x 24 cm) with 3 drip feed lubricator

5003800 5004800

20

TANKS

Tank Lt. 110/4" - for G.P.V. 3300 Tank Lt. 110/4" - for G.P.V. 2200

6100001 6100002

Tank Lt. 85/3" - for G.P.V. 2200 Tank Lt. 85/3" - for G.P.V. 1500-

6000000 6000001

Tank Lt. 65/2" - for G.P.V. 1500-1000 Tank Lt. 65/2" - for G.P.V. 750-500

6000002 6000003

N.B. The Tanks are included of rubber caps, adipren e sleeves (the filter is not included)

Tank Lt. 45/1"1/4 - for G.P.V. 350 6000004

21

TANKS

Tank Lt. 22/1"1/4 for G.P.V. 200 - 180 Tank Lt. 28/1"1/4 for G.P.V. 350 compact

6000007 6000008

Wall bracket for G.P.V. 350/250 Wall bracket for G.P.V. 500 to G.P.V. 1500

6001100 6000100

Tank Lt. 22/1"1/4 - for G.P.V. 280 6000005

Tank Lt. 28/1"1/4 - for G.P.V. 250 - 350 - 500/750 compact

6000006


22

BALANCING TANKS

Vertical balancing tank Lt. 110 with 4" outlet

6002019


6000018


6000019

Horizontal balancing tank Lt. 110 with 4 " outlet

6000016

Horizontal balancing tank Lt. 85 with 3"outlet

6000017

Horizontal balancing tank Lt. 65 with 2"outlet

6002017


23

SPARES PART FOR VACUUM TANKS

Cardan joint for G.P.V. 350/250 Cardan joint for G.P.V. 750/500 Cardan joint for G.P.V. 1500/1000

2000100 2000101 2000102

3/4” cartridge filter with ball (G.P.V.200/180 1” cartridge filte with ball (G.P.V.350/250/280) 2” cartridge filter with ball (G.P.V.1500/1000/750/500) 2”1/2 cartridge filter with ball (G.P.V.2200) 3” cartridge filter with ball (for balancing tank) 4” cartridge filter without ball (for balancing tank) 3” in-line filter a Tee with descharage 1”

2000164 2000018 2000017 2000019 2000162 2000166 2000165

1) Vibration damper rubber close for bracket 2) Rubber entry 1" on tank (G.P.V. 350/280) 3) Vibration damper rubber open for bracket

3000152 3001150 3000151

1) Joint for the window’s tank 2) Pin washer d. 8 3) Sheet for tanks window in plastic 4) Seeger pin d. 8 5) Pot seal 6) Seal for joint

3000034 3000505 6001010 3000506 3001037 3000501

24

ADIPRENE SLEEVES AND CAPS

Adiprene sleeves 2" x 2" (60 - 60 mm) Adiprene sleeves 2" x 3" (60 - 90 mm) Adiprene sleeves 3"x 3" (90 - 90 mm) Adiprene sleeves 1"1/4 x 1"1/2 (40 - 50) Adiprene sleeves 1" x 1"1/4 (40 - 32 mm) Adiprene sleeves 1" x 1"1/2 (32 - 50 mm) Adiprene sleeves 1"1/4 x 2" (40 - 60 mm)

3000037 3002037 3000038 3000040 3000041 3002042 3000043

ADIPRENE SLEEVES (only for vacuum tube)

Rubber caps 1"1/4 (40 mm) Rubber caps 1"1/2 (50 mm) Adiprene caps 2" (60 mm)

3000047 3000046 3000045

Adiprene sleeves 1"1/4 x 1"1/4 (40 - 40) Adiprene sleeves 2"1/2 x 2"1/2 (75 - 75) Adiprene sleeves 2"1/2 x 3" (75 - 90 mm) Adiprene sleeves 2" x 2"1/2 (60 - 75 mm) Adiprene sleeves 4" x 4" (110 - 110 mm) Adiprene sleeves 4" x 3" (110 - 90 mm) Adiprene sleeves 4" x 2"1/2 (110 - 75 mm)

3000049 3000060 3000061 3000062 3000081 3000082 3000083

ADIPRENE SLEEVES (only for vacuum tube)

Adiprene caps 3" (90 mm) Adiprene caps 4" (110 mm)

3000048 3001048

25

SILENCERS AND SEPARATORS

Silencer for G.P.V. 3300 (2") Silencer for G.P.V. 2200 (2") Silencer for G.P.V. 1500 (2") Silencer for G.P.V. 1000 (2") Silencer for G.P.V. 750/500 (1" 1/4) Silencer for G.P.V. 350/280/200 (3/4") Silencer for G.P.V. 200 a secco Silencer for G.P.V. 280 a secco End muffler elbow pipe for PV 250 - 280 - 350

6000159 6000029 6000030 6000031 6000037 6000032 6000033 6002033 6000036

Non return valve brass 2" Non return valve brass 1"1/4 Non return valve rubber with clamp 2" inox

6000034 6000035 6000120

Oil separator 2" 1/2 d. 290 mm (for G.P.V. 3300) Oil separator 2" d. 290 mm (for G.P.V. 2200) Oil separator 2" d. 250 mm (for G.P.V. 1500/1000) Oil separator 1"1/4 d. 230 mm (for G.P.V. 750/500)

2000009 2000010 2000011 2000012

26

PULLEYS FOR MOTORS

Aluminium pulley 80 1A (d. 24) + key Aluminium pulley 80 2A (d. 24) + key Aluminium pulley 120 1A (d. 24) + key Aluminium pulley 130 1A (d. 24) + key Aluminium pulley 130 1A (d. 28) + key Iron pulley 90 1A (d. 19) + key Iron pulley 90 2A (d. 24) + key Iron pulley 95 2B (d. 38) + key 10 Iron pulley 100 1A (d. 24) + key 6 Iron pulley 100 2A (d. 28) + key 8 Iron pulley 100 1B (d. 28) + key 8 Iron pulley 100 2B (d. 28) + key 8 Iron pulley 110 2A (d. 28) + key 8 Iron pulley 112 1B (d. 28) + key 8 Iron pulley 112 2B (d. 28) + key 8 Iron pulley 120 2A (d. 24) + key 8 Iron pulley 120 2A (d. 28) + key 8

6000109 6000117 6000048 6000046 6000114 6000043 6000118 6000103 6000099 6000110 6000104 6000106 6000119 6000073 6002073 6000121 6000112

Pulleys for motors

Iron pulley 120 2B (d. 28) + key 8 Iron pulley 120 2B (d. 38) + key 10 Iron pulley 125 2A (d. 28) + key 8 Iron pulley 125 1B (d. 28) + key 8 Iron pulley 125 2B (d. 28) + key 8 Iron pulley 130 1B (d. 28) + key 8 Iron pulley 130 2A (d. 24) + key Iron pulley 130 2A (d. 28) + key 8 Iron pulley 130 2B (d. 28) + key 8 Iron pulley 140 1A (d. 24) + key 6 Iron pulley 140 1A (d. 28) + key 8 Iron pulley 140 1B (d. 28) + key 8 Iron pulley 140 2B (d. 38) + key 10 Iron pulley 140 2A (d. 24) + key Iron pulley 140 2A (d. 28) + key 8 Iron pulley 150 1A (d. 24) + key 6 Iron pulley 112 2B (d. 38) + key 10

6000078 6002078 6000122 6000089 6000107 6000050 6000123 6000113 6000090 6000051 6000108 6000052 6000097 6000124 6000128 6000074 6001073

27

PULLEYS FOR PUMPS AND BELTS

V Belt A 37 (G.P.V. 350 compact) V Belt A 41 (G.P.V. 350 Lt. 45) V Belt A 43 (G.P.V. 250/350 for cardan joint) V Belt A 44 (G.P.V. 250)

6000088 6000054 6000055 6001055

Belts

V Belt A 56 (G.P.V. 500/750) V Belt B 52 (G.P.V. 3000) V Belt B 56 (G.P.V. 1000) V Belt B 57 (G.P.V. 1500/2200)

6000058 6000068 6000069

6000070

Aluminium pulley 80 1A (d. 19) Aluminium pulley 130 1A (d. 19) Aluminium pulley 125 1A (d. 19) Aluminium pulley 120 1A (d. 19) Aluminium pulley 90 1A (d. 19) Aluminium pulley 130 1B (d. 19) Aluminium pulley 140 1A (d. 19) Aluminium pulley 140 1A (d. 24) + key Aluminium pulley 140 1A (d. 19) + key Aluminium pulley 140 2A (d. 24) + key

6000111 6000040 6000041 6000042 6000043 6000062 6000077 6000039 6000076 6000139

Pulleys for pumps

Aluminium pulley 160 2A (d. 24) + key Aluminium pulley 150 2A (Ø 24) + key 6 Aluminium pulley 150 1B (d. 24) + key Iron pulley 140 2A (d. 24) + key+ fitting fan Iron pulley 150/110 A (d. 24) + key Iron pulley 150/110 B (d. 24) + key Iron pulley 150 2A (d. 24) + key+ fitting fan Iron pulley 150 1B (d. 24) + key + fitting fan Iron pulley 150 2B (d. 24) + key + fitting fan Iron pulley 180 2B (d. 28) + key + fitting fan

6000138 6000137 6001046 6001097 6000045 6002046 6000136 6000098 6000096 6000071

28

SPARES PARTS FOR TANKS

Belt stretcher slides (motor hp. 1,5 - 2) Belt stretcher slides (motor hp. 3 - 4 - 5,5) Belt stretcher slides (motor hp. 7,5 - 10)

6000020 6000021 6000022

Belt protection for 250/350 Belt protection for 350 compact Belt protection for 500/750/1000/1500 Belt protection for cardan joint Belt protection for 2200/3300/1000/1500 (with fun) Belt protection for 500 compact

6000023 6001023 6000024 6001024 6002024 6000025

Bracket for tank for G.P.V. 3300 Bracket for tank for G.P.V. 2200

6000085 6000080

29

SPARES PARTS FOR TANKS

Bracket for tank for G.P.V. 1500/1000/750/500 Bracket for tank for G.P.V. 350 (Lt. 45)

6000011

6000012

Complete floor bracket to G.P.V.500/750 normal (slide belt Hp.2)

6000082

Complete floor bracket for G.P.V.3300 with carter/fun Complete floor bracket for G.P.V.2200 with carter/fun

6000013 6002013

Complete floor bracket to G.P.V. 1000/1500 with carter/fun Complete floor bracket to G.P.V.750/ 1000/1500 normal (slide belt Hp.3-4-5,5)

6002014 6000014

30

ELECTRIC MOTORS

Electric motor hp.1,5 three-phase (1400 gg) Electric motor hp.2 three-phase (1400 gg) Electric motor hp.3 three-phase (1400 gg) Electric motor hp.4 three-phase (1400 gg) Electric motor hp.5,5 three-phase (1400 gg) Electric motor hp.7,5 three-phase (1400 gg) Electric motor hp.10 three-phase (1400 gg) Electric motor hp.1,5 three-phase (2800 gg) Electric motor hp.2 three-phase (2800 gg) Electric motor hp.3 three-phase (2800 gg) Electric motor hp.4 three-phase (2800 gg) Electric motor hp. 5,5 three-phase (2800 gg)

9000500 9000501 9000502 9000503 9000504 9000505 9000506 9000515 9000516 9000517 9000518 9000519

ELECTRIC MOTORS

Condenser for one-phase motor hp. 0,75 Condenser for one-phase motor hp. 1 Condenser for one-phase motor hp. 1,3

9000301 9000302 9000303

Electric motor hp.7,5 three-phase (2800 gg) Electric motor hp.1,5 one-phase (1400 gg) Electric motor hp.2 one-phase (1400 gg) Electric motor hp.3 one-phase (1400 gg) Electric motor hp.1,5 one-phase (2800 gg) Electric motor hp.2 one-phase (2800 gg) Electric motor hp.3 one-phase (2800 gg) Electric motor hp.0,75 three-phase B3-B5 Electric motor hp.1 three-phase B3-B5 Electric motor hp. 0,75 one-phase B3-B5 Electric motor hp. 1 one-phase B3-B5

9000520 9000507 9000508 9000509 9000521 9000522 9000523 9000510 9000511 9000512 9000513

CONDENSER FOR ONE - PHASE MOTORS

Condenser for one-phase motor hp. 1,5 Condenser for one-phase motor hp. 2 Condenser for one-phase motor hp. 3

9000304 9000305 9000306

31

FLOW METER, ACCESSORIES AND OIL

Complete kit flow meter 5000 nl/min (flow meter+bypass+digital vacuum+suitcase+counter) Flow meter mod. AL 3000 nl/mi Bypass 2000 nl/min Digital vacuum meter Suitcase plastic with rubber connection Counter for check rpm motor/pump

5000605 5000600 5000601 5000603 5000604 5000602

Oil can of Lt. 5 min. 46 Oil can of Lt. 20 min. 46 Oil can of Lt. 1 min. 46 Set of 6 oil can Lt. 5 (tot. Lt. 30) min. 46

5000203 5001203 5000204 5000205

N.B. It’s avaible on demand the oil (min32 and 64)!

32

NOTE

……………………………………………………………………………………………………………………………………..

……………………………………………………………………………………………………………………………………..

……………………………………………………………………………………………………………………………………..

……………………………………………………………………………………………………………………………………..

……………………………………………………………………………………………………………………………………..

……………………………………………………………………………………………………………………………………..

……………………………………………………………………………………………………………………………………..

……………………………………………………………………………………………………………………………………..

……………………………………………………………………………………………………………………………………..

……………………………………………………………………………………………………………………………………..

……………………………………………………………………………………………………………………………………..

……………………………………………………………………………………………………………………………………..

……………………………………………………………………………………………………………………………………..

……………………………………………………………………………………………………………………………………..

……………………………………………………………………………………………………………………………………..

……………………………………………………………………………………………………………………………………..

……………………………………………………………………………………………………………………………………..

……………………………………………………………………………………………………………………………………..

……………………………………………………………………………………………………………………………………..

……………………………………………………………………………………………………………………………………..

……………………………………………………………………………………………………………………………………..

……………………………………………………………………………………………………………………………………..

……………………………………………………………………………………………………………………………………..

……………………………………………………………………………………………………………………………………..

……………………………………………………………………………………………………………………………………..

……………………………………………………………………………………………………………………………………..

……………………………………………………………………………………………………………………………………..

……………………………………………………………………………………………………………………………………..

……………………………………………………………………………………………………………………………………..

……………………………………………………………………………………………………………………………………..

……………………………………………………………………………………………………………………………………..

Documents

GENERAL INDEX CATALOGUE 2009 - · PDF file3 general index catalogue 2009 • g.p.v.3300 4 • g.p.v.2200 5 • g.p.v.1500 6