GALLERIE E TUNNEL - Select Light · 5 GALLERIE E TUNNEL image 3 image 4 sibilities of energy saving which up to then were unthinkable. The LED technology reached in the last years

1

GALLERIE E TUNNEL

FAEBER LIGHTING SYSTEM S.p.A.Via Papa Giovanni XXIII21040 Uboldo (VA) Italy

Telefono 39 02 96787811Telefax 39 02 96788846

www.faeber.it - [email protected]

LE

D

CA

TA

LO

GU

E

Palacio Guanabara rio de Janeiro brasile - liGhtinG ProJect Milton GiGlio atelier da luz

4

image 1

image 2

HISTORY AND EVOLUTION

LED is the acronym of Light Emitting Dio-

de. The first LED was developed in 1962 in

the USA by Nick Holonyak Jr.

Initially LED were available with only one

monochromatic emission of about 700

nanometres of wave length, meaning of

red colour. Even having a high luminous

efficiency they could be used mainly just

as signals but not for general lighting.

In the following years yellow and gre-

en LED were developed but still were

excluded for use in the world of lighting.

Only in the ninety’s, finally, LED with a hi-

gher efficiency and greater colour range

were created until also blue colour was

possible and enabled the mixture of

light: one red, one green and one blue

LED resulting in white colour. The subse-

quent development resulted in the use

of LED emitting specific wave lengths by

means (image 1-2) of exciting a layer of

phosphor and letting it light with high

efficiency. The light had a wide spectrum

and therefore different shades of white

also considered as colour temperatures

– Kelvin. This represents the biggest re-

volution in the lighting world of the last

years introducing dynamics previously

related to electronics and giving plan-

ners a wide range of solutions and pos-

Phosphor Layer

Cathode

TVS

LED Chip

Bond Layer

Metal Interconnect Layer

Silicone Lens

Ceramic Substrate

Thermal Pad

5

GALLERIE E TUNNEL

image 3

image 4

sibilities of energy saving which up to

then were unthinkable.

The LED technology reached in the last

years a drastically increase of efficiency

(lm/W) allowing the use of these com-

ponents in general lighting represen-

ting a valid alternative to traditional light

sources such as sodium high pressure

and metal halide discharge and fluore-

scent lamps.

In respect to these light sources LED

offers:

1- High efficiency in continuous growth,

at present LED are available with 160

lm/W and it seems possible to reach 200

lm/W in future (image 3).

2- High colour rendering CRI 70-90

3- Long lifetime > 50.000 h

4- Instant ignition

5- Excellent functioning also at very low

temperature (-25°C)

6- Tiny dimensions allowing the creation

of items with the most variable forms and

dimensions (image 4).

7- Good resistance to vibrations allowing

the use in harsh environments

8- Absence of infrared radiation emis-

sions andvery low UV radiation emission.

9- Absence of mercury

Cathode

TVS

Edison bulbs

fluorescent tubes

current industrial target

Nichia

Luminous efficiency of white LED

Lum

inou

s ef

ficie

ncy

(lum

en/w

att)

Preview of the English Department for Trade and Industry

Mejio Univ.

Cree

160

140

120

100

80

60

40

20

0

1990 1995 2000 2005 2010 2015

6

image 5

WHITE LIGHT

To generate white light normally one or

more blue LED are used which excite a la-

yer of phosphor which emits white light.

This light has the following characteri-

stics:

a) Colour temperature:

It is the temperature a black body should

have when the luminous radiation emit-

ted by itself appears chromatically as clo-

se as possible to the considered radiation

of the light to measure.

A low temperature (e.g. 2000°K) corre-

sponds to a yellow-orange colour. Even

lower one passes to red and to infrared,

which one can’t see anymore, whereas by

rising the temperature the light becomes

first white, then blue, violet and finally ul-

traviolet. If commonly said a light is warm

it is in reality corresponding to a low co-

lour temperature and vice versa a higher

temperature results in a commonly defi-

ned cool light.

These definitions are simply psycholo-

gically based since our mind associates

to colours like yellow-orange the idea of

heat and to colours like white and blue

coldness.

1800K 4000K 5500K 8000K 12000K 16000K

7

To notice that to talk about colour tempe-

rature makes only sense if the light source

emits a continuous energy spectrum.

This does not happen to all light sources.

Chromatic zones (BIN) (image 6): the LED

production is divided into areas defining

the chromatic coordinates.

These are so called BIN. Deliveries are

subject to a certain BIN number; the lo-

wer the number the better colour unifor-

mity.

FAEBER decided to use batches of low BIN

number even if it might result in a higher

price.

b) Colour Rendering Index (CRI):

This is the ability of a light source to di-

stinguish colours of a total sample refe-

rence (generally 8).

The norm UNI 10380 splits the different

values of the chromatic rendering index

in five groups:

• 1A: 90%

• 1B: 80% 90%

• 2: 60% 80%

• 3: 40% 60%

• 4: 20% 40%

image 6

8

The norm also suggests which CRI to be

used according to

the place to illuminated:

• 1A: housing, museums, graphic studios,

hospitals, medical cabinet, etc.

• 1B: offices, schools, shops, gyms, thea-

tres, textile and colour production, etc.

• 2: passage rooms, corridors, staircases,

elevators, gyms, service areas, etc.

• 3: indoor industrial, offices, warehouses

etc.

• 4: parking lots, piers, construction area,

loading areas etc.

Cold light LED generally have a CRI of 70-

75 whereas warm light ones of 75-80 and

sometimes over 90.

INTERNATIONAL CODES FOR COLOUR

TEMPERATURE:

At an International level a light source can

be defined with a 3 digit code.

The first digit is the chromatic rendering:

9 = Ra 90÷100

8 = Ra 80÷90

7 = Ra 70÷80

6 = Ra 60÷69

9

image 7

The second and third digit is the colour

temperature:

27 = 2700 K

30 = 3000 K

40 = 4000 K

65 = 6500 K

E.g.: /830 defines a light source with chro-

matic index of 80-90 and a colour tempe-

rature of 3000°K.

COLOURED LED

By pondered mixing of light sources ha-

ving the 3 primary colours red, green and

blue (RGB) it is possible to obtain all iris

colours (image 7).

The chromatic diagram CIE defines a co-

lour area which includes all colours visi-

ble to the human eye, independent of

the luminance. To obtain all colours light

fixtures are equipped with primary co-

lours LED and dimmable drivers run with

different protocols among which DMX

is the most common.

FAEBER LIGHTING SYSTEM supplies on de-

mand Fixtures and necessary interfaces

to generate and manage these signals.

Spectrum Locus

Planchian Locus

Illuminant A

D65

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0.0 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8

520

500

490

480

470

540

560

580

600

620

700

380460

00

70000

6000

Te (°K)4000

3000

2000 1500

y

CIE 1931 xy Chromaticity Diagram

Obtainable cOlOurs with multichip leD by means Of pOnDereD mix sO tO reprODuce all cOlOurs insiDe the pOlygOne having as verticals the cOOrDinates Of each leD

10

LED LIFETIME

LED are electronic components having a

long but not Infinite lifetime. Generally

LED do not “die” and switch off but pro-

gressively lower the light values to a not

acceptable level.

The presumed lifetime of an LED is con-

sidered by the number of hours within a

certain percentage of samples presents a

percentage of higher flux compared to a

fraction of the initial flux.

E.g. 50.000h L70B10 means that after

50.000h at least 90% of the LED Still

have a flux of 70% compared to the ini-

tial flux.

HEAT MANAGEMENT

Different factors influence the life of an

LED (image 8) but the one in particular is

the junction temperature (Tj) which is sup-

posed to be the lowest possible (image 9).

LED manufacturers submit lists indicating

the presumed lifetime based on this tem-

perature.

To guarantee a long lifetime of the pro-

duct it is therefore essential for the de-

sign to use technical devices (radiators,

thermal interfaces etc) aimed to dissipate

the produced heat correctly.

Being conscious about this, FAEBER desi-

gns its fixtures so to ensure the tempera-

tures are far below the recommended

maximums.

image 8

image 9

TJ = TA + (Rth J-A x Pd)

Rth J-C

Rth C-P

Rth P-A

Tjunction

Tcase

Tplate

Tambient

Component

SubstrateTechnology

Cooling System

100k

80k

60k

40k

20k

0

60 80 100 120

“LED LIFE”

Star limits

Temperature

0.1 A

0.35 A

0.7 A

1 A

11

image 10

POWER SUPPLY

Another very important aspect to achie-

ve an efficient, save and long lasting pro-

duct relies on the choice of a correct dri-

ver which has to supply over the whole

lifetime of the LED the right current.

To maximize energy saving, it is also pos-

sible to use dimmable drivers which re-

duce the emitted light when full emission

is not needed so to lower the absorbed

power.

This is very important in management of

street and tunnel lighting.

The most diffused dimming protocols

are with bus 1-10V, PWM or DALI. Items

equipped with dimmable drivers can be

integrated in installations managed by

remote serial signals (RS485), power line

signals or radio signals by using appro-

priate interfaces.

FAEBER has chosen to use SELV drivers

(extreme low security voltage) as to en-

sure maximum security also during main-

tenance of the fittings.

LED FIXTURES AND STREET LIGHTING

Street lighting is one of the fields where

LED fixtures show all their advantages

compared to items with discharge lamps.

This is due further to the already mentio-

ned high efficiency and versatility of LED

to the following aspects:

Photopic v (l) and scotopic v2 (l) human response curve1

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0

400 450 500 550 600 650 700 750wavelength (nm)

Rel

ativ

e re

spo

nse

Visual acuity curves for photopicand scotopic vision.

CIE 1924 photopic v (l)

CIE 1951 scotopic v2 (l)

Phosphor Layer

Cathode

TVS

LED Chip

Bond Layer

Metal Interconnect Layer

Silicone Lens

Ceramic Substrate

Thermal Pad

12

image 11

image 12

image 13

1) High chromatic rendering with spec-

trum leading towards the blue zone. In

fact during night vison (scotopic) the sen-

sibility of the human eye tends towards

frequencies near to blue (image 10).

To obtain the same visual effect of a so-

dium high pressure lamp by using an LED

less light and therefore energy is used.

The Italian norm UNI 11248 takes this

scientific phenomena into consideration

and allows to declass by one category

if light sources with a CRI > 60 are used.

E.g. if a street taken into consideration is

classified ME3a it can be classified ME4a if

these light sources are used.

The norm UNI-EN13201 demands for

a correct illumination of ME3a streets

1.0cd/m2 and 0.75 cd/m2 for a ME4a, so

25% less light (image 11).

2) Possibility to obtain a great number of

different photometries which can be ap-

plied to all type of streets (image 12).

This allows to direct all the light on the

street itself and to avoid dispensations im-

proving the coefficient of use (image 13).

The amount of light emitted towards the

external area of the carriage way (the red

traced area) is clearly lower when good

LED are used (b) in respect of the same

emission in that area when traditional

lights are used (a).

AFFECTING PARAMTERS CATEGoRy ChANGE

normal visual TasK -1

non conflicTual -1

Traffic flux minor of 50% To maximum -1

Traffic flux minor of 25% To maximum -2

evidenT signs in conflicTual areas -1

wiTh cri ≥ 60 iT’s possible To reduce one caTegory -1

wiTh cri ≤ 30 iT’s necessary To increase by one caTegory +1

danger of aTTacK +1

presence of same level inTerchange and/or inTersecTion +1

200

200

400

600

800

1000

200

200

400

600

800

10000˚0˚ 15˚15˚ 15˚15˚ 30˚30˚ 30˚30˚

45˚45˚ 45˚45˚

60˚60˚ 60˚60˚

75˚75˚ 75˚75˚

90˚90˚ 90˚90˚

105˚105˚ 105˚105˚

120˚120˚ 180˚180˚

cd/kl cd/kl m m

200

200

400

600

800

10000˚ 15˚15˚ 30˚30˚

45˚45˚

60˚60˚

75˚75˚

90˚90˚

105˚105˚

120˚180˚

cd/klm

Gamma Angle Gamma Angle Gamma Angle

13

image 14

The indicated percentages refer to a typi-

cal installation and lead to a factor of use

UF which is in case (a) 0,8 x 0,55 = 0,4 and

in case (b) 0,8 x 0,75 = 0,6

3) Long lifetime of the LED allow to incre-

ase the reliability of an installation and to

reduce drastically the maintenance inter-

vals and therefore its costs in particular in

critical conditions like in tunnels.

Notice that not only the use of LED is

sufficient to really implement energy sa-

ving but the whole engineering parame-

ters are correctly defined like choice of

sources, optics, thermal management etc.

To determine in quantity if a lighting

fixture is good the first data to be consi-

dered is it’s efficiency (lm/W) (image 14).

In case of street lighting it is furthermore

necessary to define if a particular product

is suitable to illuminate a street. This can

be only done by knowing its photometry

and a light calculation to determine the

efficiency of the whole installation mea-

ning the amount of power needed to illu-

minate one kilometre [W/km].

At an international level attempts are

made to define a labelling method to the-

se parameters.

Carriage way: 2x3 m (tot. 6,0 m)Sidewalk: 1x2,5 mPole backing: 0,7 mDisposition: unilateral on the rightExcerpt: 0,3 mInterdistance: 24 mHeight: 8 m

FIXTURE Maintenance factor Fixture tilt cd/

m2 U gen U long T I % Sr medium

illum.min/med

illum.Power

absorptionSa-

ving

ST100W SUPER 0,8 0 * 1,11 0,55 0,85 6,61 0,56 11 0,58 120 -

STARLED 64/0,500 A 0,9 0 * 1 0,71 0,64 4 0,66 9 0,69 96 20,0%

STARLED 32/0,7 A 0,9 0 * 0,69 0,68 0,72 3,33 0,65 7 0,62 70 41,7%

Carriage way class ME4aSidewalk class S 4 >0,75 >0,40 >0,6 <15% >0,5 >3 -

CARRIAGE WAY SIDEWALK

With carriageway declassification

Carriage way: 2x3,5 m (tot. 7,0 m)Sidewalk: 1x1,5 mPole backing: 4,5 mDisposition: unilateral on the rightExcerpt: 0Interdistance: 25 mHeight: 8 m

FIXTURE Maintenance factor Fixture tilt cd/

m2 U gen U long T I % Sr medium

illum.min/med

illum.Power

absorptionSa-

ving

ST150W SUPER 0,8 10 * 1,56 0,42 0,79 9,02 0,64 31 0,62 170 -

STARLED 64/0,600 A 0,9 0 * 1,17 0,55 0,72 3,5 0,63 22 0,66 115 32,4%

STARLED 64/0,600 A 0,9 0 * 0,92 0,55 0,72 3,5 0,63 17 0,66 96 43,5%

Carriage way class ME4aSidewalk class S 4 >1 >0,40 >0,70 <15% >0,5 >7,5 -

CARRIAGE WAY SIDEWALK

With carriageway declassification

ST 100W

ST 150W

14

GALLERIE E TUNNEL

LED

IEC 62031 : 2008 LED Modules for General Lighting – Safety Specifications

IEC 62560 : 2011 Self-ballasted LED-lamps for general lighting services > 50 V - Safety specifications

IEC/PAS 62612 : 2009 Self-ballasted LED lamps for general lighting services > 50 V - Performance requirements

IEC 60061 series Lamp caps and holders together with gauges for the control of interchangeability and safety

IEC 60838-2-2 : 2006 Miscellaneous lampholders -Part 2-2: Particular requirements - Connectors for LEDmodules

IEC/TR 61341 : 2010 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps

IEC 61231 : 2010 International lamp coding system (ILCOS)

IEC TS 62504 : 2011 Terms and definitions for LEDs and LED modules in general lighting

POWER SUPPLY UNIT

IEC 61347-1 : 2007 Lamp controlgear - Part 1: General and safety requirements

IEC 61347-2-13 : 2006 Lamp controlgear - Part 2-13 : Particular requirements for d.c. or a.c. suppliedelectronic controlgear for LED modules

IEC 62384 : 2006 + Amd 1 : 2009 DC or AC supplied electronic control gear for LED modules

electronic controlgear for LED modules

PERFORMANCE REQUIREMENTS

IEC 62386-101 : 2009 Digital addressable lighting interface – Part 101: General requirements – System

IEC 62386-102 : 2009 Digital addressable lighting interface – Part 102: General requirements - Control Gear

IEC 62386-207 : 2009 Digital addressable lighting interface – Part 207: Particular requirements for control gearLED modules (device type 6)

IEC 60598 series Luminaires

SYSTEMS

IEC 62471 : 2006 Photobiological safety of lamps and lamp systems

IEC/TR 62471-2 : 2009 Photobiological safety of lamps and lamp systems – art 2: Guidance on manufacturingrequirements relating to non-laser optical radiation safety

MEASUREMENTS

CIE 127 : 2007 Measurement of LEDs

EN 13032-1 Light and lighting - Measurement and presentation of photometric data of lamps andluminaires - Part 1: Measurement and file format

EN 13032-2 Light and lighting - Measurement and presentation of photometric data of lamps andluminaires - Part 2: Lighting of indoor work places

EMC- Electromagnetic compatibility

IEC 61547 : 2009 Equipment for general lighting purposes - EMC immunity requirements

IEC 61000-3-2 : 2009 Electromagnetic compatibility (EMC) -Part 3-2: Limits - Limits for harmonic currentemissions (equipment input current ≤ 16 A per phase)

IEC 61000-3-3 Limitation of voltage fluctuations and flicker in low-voltage supply systems forequipment with rated current ≤16 A

CISPR 15 : 2008 Limits and methods of measurement of radio disturbance characteristicsof electrical lighting and similar equipment

EMF - Electromagnetic fields

IEC 62493 : 2009 Assessment of lighting equipment related to human exposure to electromagnetic

APPLICABLE NORMSThe use of LED as a light source is a still young technology which has revolutionized the world of lighting fixtures and flooded the market also with unsafe and unreliable products. After the initial confusion, thanks to the effort of regulatory agencies lots of technical norms have been implemented to help producers to make good products. The norms are generally divided into safety and performance. Following the situation on IEC/EN norms concerning LED available at present:

GALLERIE E TUNNEL

Street Lighting

STARLED 1

STARLED 2

ZETA SBO LED

AVENIDA LED

CARRETERA LED

SUNLED 1

SUNLED 2

FASTLED ST

SATURN LED P

POWER N° LED IP KELVIN CLASS CODE PAGE

70 32 65 4000 K II 0005432243 19115 64 65 4000 K II 0005464243

175 96 65 4000 K II 000519624320

230 128 65 4000 K II 00051128243

34 32 65 4000 K II 0070832242SBO 21

70 32 66 4000 K II 0006132243 22

70 32 66 4000 K II 000623224323

96 64 66 4000 K II 0006264243

57 24 65 4000 K II 0005724444

2485 36 65 4000 K II 0005736444

114 48 65 4000 K II 0005748444

175 96 65 4000 K II 000589644425

230 128 65 4000 K II 00058128444

57 24 66 4000 K II 003792444426

85 36 66 4000 K II 0037936444

30 30 65 4300 K II 0006830343P27

30 30 65 4300 K II 0006830243P

GALLERIE E TUNNEL

Tunnel lighting

FASTLED TU

ZETA LED

BRENNERO LED


57 24 66 6000 K II 003792446230

85 36 66 6000 K II 0037936462

52 32 65 6000 K II 0070832361 31

60 48 65 6000 K II 007544801 32

SATURN LED S

SATURN LED T

SATURN LED A


30 30 65 4300 K II 0006830341S28

30 30 65 4300 K II 0006830241S

30 30 65 4300 K II 0006830341T28

30 30 65 4300 K II 0006830241T

30 30 65 4300 K II 0006830341A

30 30 65 4300 K II 0006830241A29

Floodlights POWER N° LED IP KELVIN CLASS CODE PAGE

85 36 10° 65 4000 K II 0037936447

85 36 25° 65 4000 K II 0037936448 33

85 36 40° 65 4000 K II 0037936449FASTLED PR

GALLERIE E TUNNEL

Outdoor Lighting


45 36 10° 65 RGB II 0037936947

45 36 25° 65 RGB II 0037936948 34

45 36 40° 65 RGB II 0037936949

35 30 10° 66 4000 K II 003141030

3535 30 25° 66 4000 K II 003142530

35 30 35° 66 4000 K II 003143530

FASTLED PR RGB

TIGER LED

HORIZONTE I

HORIZONTE I RGB

HORIZONTE E

TRUCK LED

HORIZONTE E RGB

TRUCK LED RGB


26÷55 24 40° 67 4000 K II 003662424436

26÷55 24 ASM 67 4000 K II 0036624249

43 36 40° 67 RGB II 003663629437

45 36 ASM 67 RGB II 0036636299

26÷55 24 40° 65 4000 K II 003672424438

26÷55 24 ASM 65 4000 K II 0036724249

35 36 40° 65 RGB II 003673629439

35 36 ASM 65 RGB II 0036636299

18 12 15° 67 2700 K II 008021511

40

18 12 30° 67 2700 K II 00802301118 12 90° 67 2700 K II 008029011

18 12 15° 67 5600 K II 00802151018 12 30° 67 5600 K II 00802301018 12 90° 67 5600 K II 008029010

22 18 15° 67 RGB II 00802151841

22 18 30° 67 RGB II 008023018


30 30 65 4300 K II 0006830341S28

30 30 65 4300 K II 0006830241S

30 30 65 4300 K II 0006830341T28

30 30 65 4300 K II 0006830241T

30 30 65 4300 K II 0006830341A

30 30 65 4300 K II 0006830241A29

GALLERIE E TUNNELSTRADALI

MAYA

IndoorPOWER N° LED IP KELVIN CLASS CODE PAGE

115 64 ASM 20 4000 K II 0038564249 42

52 DALI 120° 40 5000 K I 0197945150F1DALI43

52 DALI 120° 40 5000 K I 0197945150F2DALI

15 63° 20 2700 K I 0197307126

4415 63° 20 2700 K I 0197307226

15 63° 20 4000 K I 0197307146

15 63° 20 4000 K I 0197307246

12 DIM 60° 44 2700 K I 0197406126DIM

45

12 DIM 74° 44 2700 K I 0197406127DIM

14 DIM 60° 44 4000 K I 0197409146DIM

14 DIM 74° 44 4000 K I 0197409147DIM

15 DIM 60° 44 3000 K I 0197409136DIM

15 DIM 74° 44 3000 K I 0197409137DIM

27 DIM 60° 44 3000 K I 0197418136DALI

27 DIM 74° 44 3000 K I 0197418137DALI

27 DIM 60° 44 4000 K I 0197418146DALI

27 DIM 74° 44 4000 K I 0197426147DALI

37 DIM 60° 44 3000 K I 0197426136DALI

37 DIM 74° 44 3000 K I 0197426137DALI

37 DIM 60° 44 4000 K I 0197426146DALI

37 DIM 74° 44 4000 K I 0197426147DALI

13 99° 20-44 4000 K I 0197511140DK

46

15 99° 20-44 3000 K I 0197511130DK

26 99° 20-44 4000 K I 0197520140DK

28 99° 20-44 3000 K I 0197520130DK

46 99° 20-44 4000 K I 0197530140DK

40 99° 20-44 RGB I 0197509190DK

13 99° 20-44 4000 K I 0197511140SV

46

15 99° 20-44 3000 K I 0197511130SV

26 99° 20-44 4000 K I 0197520140SV

28 99° 20-44 3000 K I 0197520130SV

46 99° 20-44 4000 K I 0197530140SV

40 99° 20-44 RGB I 0197509190SV

13 80° 20 4000 K I 0197711148

47

15 80° 20 3000 K I 0197711138

26 80° 20 4000 K I 0197720148

28 80° 20 3000 K I 0197720138

46 80° 20 4000 K I 0197730148

50 80° 20 3000 K I 0197730138

MAGALED

INCA 125

INCA 236 DK

INCA 236 SV

INCA 184

INCA Q

LED Strip ip20-64-65 DA 1,8 A 14,4 W/m 20-65-67 2700-4000-5000 K 48

DMX Controller central unit dmx stand alone 49

COLOUR TABLES BI WHITE • AL ALUMINIUM • IN INOX • GR GREY • GRCF GUN STEEL GREY • GRV GREEN GREY • NE BLACK

19

GALLERIE E TUNNELSTREET LIGHTING

305

60 mm

110

DESCRIPTIONCode Power Nr. LED Lumen Kelvin CRI IP Class Colour Weight

STARLED 1 32 LED 0005432243 70 32 4900 4000 ≥75 65 II GR 10,0

STARLED 1 64 LED 0005464243 115 64 9200 4000 ≥75 65 II GR 10,0

Street and urban decoration lighting fixture with 32 or 64 power LED with secondary optic, optimized pho-tometry for street lighting purpose, cut-off. Compliant to norms concerning light pollution (e.g. UNI 10819). Body of diecast aluminium polyester powder coated in standard grey colour. Tempered calcic-sodium protection glass of 5mm. Silicone gaskets. Suitable for side pole mounting diameter 60mm or as post top mounting with separate accessories.Applicable norms EN 60598-1, EN 60598-2-5, EN6100-3-2, EN 55015Cable gland M20 (cable 9-11mm)Power correction factor > 0,98

STARLED 1

central unit dmx stand alone 49

200

200

400

600

800

1000

0˚ 15˚15˚ 30˚30˚

45˚45˚

60˚60˚

75˚75˚

90˚90˚

105˚105˚

120˚180˚

cd/klm

270

0180

90

25155

Semipiani C

270.0

180.0 0.0

90.0

25.0

Mast diam.745 mm

Angle Gamma

Kg

20



STARLED 2 96 LED 0005196243 175 96 14.100 4000 ≥75 65 II GR 18,2

STARLED 2 128 LED 00051128243 230 128 18.400 4000 ≥75 65 II GR 18,2

410

140

60 mm

Street and urban decoration lighting fixture with 96 or 128 power LED with secondary optic, optimized pho-tometry for street lighting purpose, cut-off. Compliant to norms concerning light pollution (e.g. UNI 10819). Body of diecast aluminium polyester powder coated in standard grey colour. Tempered calcic-sodium pro-tection glass of 5mm. Silicone gaskets.Suitable for side pole mounting diameter 60mm or as post top mounting with separate accessories (on request).Applicable norms EN 60598-1, EN 60598-2-5, EN6100-3-2, EN 55015Cable gland M20 (cable 9-11mm)Power correction factor > 0,98

STARLED 2

200

200

400

600

800

1000

0˚ 15˚15˚ 30˚30˚

45˚45˚

60˚60˚

75˚75˚

90˚90˚

105˚105˚

120˚180˚

cd/klm

270

0180

90

25155

Semipiani C

270.0

180.0 0.0

90.0

25.0

Mast diam.

1000

Angle Gamma

Kg

21



ZETA SBO 32 LED 0070832242SBO 34 32 2.200 4000 ≥75 65 II GR 5,0

Street and urban decoration lighting fixture with 32 power LED with secondary optic, optimized photo-metry for street lighting purpose, cut-off. Compliant to norms concerning light pollution (e.g. UNI 10819). Body of diecast aluminium (EN AB46100) polyester powder coated in standard grey colour. Tempered calcic-sodium protection glass of 5mm. Silicone gaskets.Polyamide cable gland PG 13,5 (cables 9-11mm).Twistable and adjustable decorative aluminium bracket (included) suitable for post top mounting 60mm.Applicable norms EN 60598-1, EN 60598-2-5, EN6100-3-2, EN 55015Power correction factor > 0,98

ZETA SBO LED

200

200

400

600

800

1000

0˚ 15˚15˚ 30˚30˚

45˚45˚

60˚60˚

75˚75˚

90˚90˚

105˚105˚

120˚180˚

cd/klm

270

0180

90

25155

Semipiani C

270.0

180.0 0.0

90.0

25.0

260

130

41060 mmMast diam.

Angle Gamma

Kg

22



AVENIDA 32 LED 0006132243 70 32 4.900 4000 ≥75 66 II GR 8,7

Street lighting fixture with 32 power LED with secondary optic, optimized photometry for street lighting purpose, cut-off. Compliant to norms concerning light pollution (e.g. UNI 10819). Body of diecast aluminium (EN AB 46100) polyester powder coated in grey RAL9006. Tempered calcic-sodium protection glass of 5mm. Silicone gaskets.Suitable for post top and side entry mounting 60mm.Applicable norms EN 60598-1, EN 60598-2-5, EN6100-3-2, EN 55015Power correction factor > 0,98

524

245

304

60 mm

AVENIDA LED

200

200

400

600

800

1000

0˚ 15˚15˚ 30˚30˚

45˚45˚

60˚60˚

75˚75˚

90˚90˚

105˚105˚

120˚180˚

cd/klm

270

0180

90

25155

Semipiani C

270.0

180.0 0.0

90.0

25.0

Mast diam.

Angle Gamma

Kg

23



CARRETERA 32 LED 0006232243 70 32 4900 4000 ≥75 66 II GR 11,5

CARRETERA 64 LED 0006264243 96 64 7250 4000 ≥75 66 II GR 11,5

Street lighting fixture with 32 or 64 power LED with secondary optic, optimized photometry for street ligh-ting purpose, cut-off. Compliant to norms concerning light pollution (e.g. UNI 10819). Body of diecast alumi-nium (EN AB 46100) polyester powder coated in grey RAL9006. Tempered calcic-sodium protection glass of 5mm. Silicone gaskets.Suitable for post top and side entry mounting 60 – 76mm. Orientable by 5° degree steps (+5° -15° side entry mounting and 0°-20° post top mounting).Applicable norms EN 60598-1, EN 60598-2-5, EN6100-3-2, EN 55015Power correction factor > 0,98

667

245

330

60-76 mm

CARRETERA LED

200

200

400

600

800

1000

0˚ 15˚15˚ 30˚30˚

45˚45˚

60˚60˚

75˚75˚

90˚90˚

105˚105˚

120˚180˚

cd/klm

270

0180

90

25155

Semipiani C

270.0

180.0 0.0

90.0

25.0

Mast diam.

Angle Gamma

Kg

24

GALLERIE E TUNNEL STREET LIGHTINGSTREET LIGHTING


SUNLED 1 24 LED 0005724444 57 24 4270 4000 ≥75 65 II GRCF 6,5



Street lighting fixture with 24, 36 or 48 power LED with secondary optic, optimized photometry for street lighting purpose, cut-off. Compliant to norms concerning light pollution (e.g. UNI 10819). Body of diecast aluminium polyester powder coated in gunmetal grey. Tempered calcic-sodium protection glass of 4mm. Silicone gaskets.Suitable for side pole mounting diameter 60mm or as post top mounting with separate accessories (on re-quest). Cable gland M20 (cable 9÷11 mm). Dimmable version on request.Applicable norms EN 60598-1, EN 60598-2-5, EN6100-3-2, EN 55015Power correction factor > 0,98

SUNLED 1

572

242

718090

60 mm

200

200

400

600

800

1000

0˚ 15˚15˚ 30˚30˚

45˚45˚

60˚60˚

75˚75˚

90˚90˚

105˚105˚

120˚180˚

cd/klm

270

0180

90

25155

Semipiani C

270.0

180.0 0.0

90.0

25.0

Mast diam.

Angle Gamma

Kg

25



SUNLED 2 96 LED 0005896444 175 96 14.200 4000 ≥75 65 II GRCF 14,0

SUNLED 2 128 LED 00058128444 230 128 18.400 4000 ≥75 65 II GRCF 14,0

Street lighting fixture with 96 or 128 power LED with secondary optic, optimized photometry for street lighting purpose, cut-off. Compliant to norms concerning light pollution (e.g. UNI 10819). Possibility of LED driving with different currents. Body of diecast aluminium polyester powder coated in gunmetal grey. Tem-pered calcic-sodium protection glass of 4mm. Silicone gaskets.Suitable for side pole mounting diameter 60mm or as post top mounting with separate accessories (on re-quest). Cable gland M20 (cable 9÷11 mm). Dimmable version on request.Applicable norms EN 60598-1, EN 60598-2-5, EN6100-3-2, EN 55015Power correction factor > 0,98

B2

3

72

374

796

60 mm

95 80

SUNLED 2

200

200

400

600

800

1000

0˚ 15˚15˚ 30˚30˚

45˚45˚

60˚60˚

75˚75˚

90˚90˚

105˚105˚

120˚180˚

cd/klm

270

0180

90

25155

Semipiani C

270.0

180.0 0.0

90.0

25.0

Mast diam.

Angle Gamma

Kg

26



FASTLED ST 24 LED 0037924444 57 24 4200 4000 ≥75 66 II GRCF 3,0

FASTLED ST 36 LED 0037936444 85 36 6400 4000 ≥75 66 II GRCF 3,0

Street lighting floodlight with 24 or 36 power LED with secondary optic, optimized photometry for street lighting purpose, cut-off. Compliant to norms concerning light pollution (e.g. UNI 10819). Body of diecast aluminium polyester powder coated in gunmetal grey. Tempered calcic-sodium protection glass of 4mm. Silicone gaskets.Fixing bracket in galvanized steel. Post top mounting accessory on request.Cable gland M20 (cable 9÷11 mm). Applicable norms EN 60598-1, EN 60598-2-5, EN6100-3-2, EN 55015Power correction factor > 0,98

38042724

0

70

35

252

34 34

FASTLED ST

200

200

400

600

800

1000

0˚ 15˚15˚ 30˚30˚

45˚45˚

60˚60˚

75˚75˚

90˚90˚

105˚105˚

120˚180˚

cd/klm

270

0180

90

25155

Semipiani C

270.0

180.0 0.0

90.0

25.0

Angle Gamma

holes 8,5mm

Kg

27



SATURN LED 30 P 0006830343P 30 30 3100 4300 75 65 II NE 8,0

SATURN LED 30 P 0006830243P 30 30 3100 4300 75 65 II GR 8,0

Street lighting fixture with 30 power LED with secondary optic, optimized photometry for street lighting purpose, cut-off. Compliant to norms concerning light pollution (e.g. UNI 10819). Body of diecast aluminium degreased and phosphor chromatized and polyester powder coated in graphite black RAL9011, on request powder coated in grey RAL9006 gross finish. UV and saline fog resistant. Inside part of white galvanized ste-el. Tempered calcic-sodium protection glass of 5mm. Silicone gaskets. Top opening with stainless steel screws INOX AISI 304.Post top or side pole mounting diameter 60mm. Adjustable by 2,5° degree steps, fixing by means of 4 stainless steel grains.Cable gland M20 (cable 9÷11 mm). Applicable norms EN 60598-1, EN 60598-2-5, EN6100-3-2, EN 55015Power correction factor > 0,98

SATURN LED 30 P

MAX0,187mq

282

488

564612

190

143

60 mm

200

200

400

600

800

10000˚ 15˚15˚ 30˚30˚

45˚45˚

60˚60˚

75˚75˚

90˚90˚

105˚105˚

120˚180˚

cd/klm

0180

90

270

40140

Semipiani C

180.00 .090.0

270.0140.0 40.0

Mast diam.

Angle Gamma

Kg

28



SATURN LED 30 S 0006830341S 30 30 2900 4300 75 65 II NE 7,5

SATURN LED 30 T 0006830341T 30 30 2900 4300 75 65 II NE 7,5

SATURN LED 30 S 0006830241S 30 30 2900 4300 75 65 II GR 7,5

SATURN LED 30 T 0006830241T 30 30 2900 4300 75 65 II GR 7,5

Street lighting fixture with 30 power LED with secondary optic, optimized photometry for urban decoration purpose. Compliant to norms concerning light pollution (e.g. UNI 10819). Body of diecast aluminium degrea-sed and phosphor chromatized and polyester powder coated in graphite black RAL9011, on request powder coated in grey RAL9006 gross finish. UV and saline fog resistant. Inside part of white galvanized steel. Tem-pered calcic-sodium protection glass of 5mm. Silicone gaskets. Bottom opening with stainless steel screws INOX AISI 304.S-version: suspension mounting under console by stainless steel gas 1” thread male, the console must be provided with a reduction bush 1” gas female T-version: suspension mounting on chains of 4-8mm thickness, brass PG13,5 entranceCable gland M20 (cable 9÷11 mm). Applicable norms EN 60598-1, EN 60598-2-5, EN6100-3-2, EN 55015Power correction factor > 0,98

SATURN LED 30 S and T

S T

S

T

488

192

MAX0,182mq

246

19228

0

250

250

500

750

1000

12500˚ 15˚15˚ 30˚30˚

45˚45˚

60˚60˚

75˚75˚

90˚90˚

105˚105˚

120˚180˚

cd/klm

0180

90

270

175 5

Semipiani C180.0 0.0

90.0270.0175.0 5.0

1 inchmale

Angle Gamma

Kg

29

GALLERIE E TUNNELSTREET LIGHTINGSTREET LIGHTING


SATURN LED 30 A 0006830341A 30 30 3900 4300 75 65 II NE 9,5

SATURN LED 30 A 0006830241A 30 30 3900 4300 75 65 II GR 9,5

Urban decoration and street lighting fixture with 30 power LED with secondary optic, optimized photome-try for urban decoration. Compliant to norms concerning light pollution (e.g. UNI 10819). Body of diecast aluminium degreased and phosphor chromatized and polyester powder coated in graphite black RAL9011, on request powder coated in grey RAL9006 gross finish. UV and saline fog resistant. Inside part of white gal-vanized steel. Tempered calcic-sodium protection glass of 5mm. Silicone gaskets. Top opening with stainless steel screws INOX AISI 304. Power cut-off device.Post top pole mounting diameter 60mm. Cable gland M20 (cable 9÷11 mm). Applicable norms EN 60598-1, EN 60598-2-5, EN6100-3-2, EN 55015Power correction factor > 0,98

SATURN LED 30 A

488

192MAX

0,182mq

703

60 mm

250

250

500

750

1000

12500˚ 15˚15˚ 30˚30˚

45˚45˚

60˚60˚

75˚75˚

90˚90˚

105˚105˚

120˚180˚

cd/klm

0180

90

270

175 5

Semipiani C180.0 0.0

90.0270.0175.0 5.0

Mast diam.

Angle Gamma

Kg

30

GALLERIE E TUNNELTUNNEL LIGHTING

380427

240

70

Floodlight for tunnel lighting purpose with 24 or 36 power LED. Suitable for illumination of the permanent part in tunnels. Specific secondary optic for tunnel light, cut-off. Body of diecast aluminium polyester powder coated in gunmetal grey. Tempered calcic-sodium protection glass of 4mm. Silicone gaskets.Fixing bracket in galvanized steel. On request cable tray fixing clips available for quick installation.On request dimmable and/or remote controlled versions.Cable gland M20 (cable 9÷11 mm). Applicable norms EN 60598-1, EN 60598-2-5, EN6100-3-2, EN 55015Power correction factor > 0,98


FASTLED TU 24 LED 0037924462 57 24 4750 6000 ≥75 66 II GRCF 3,0

FASTLED TU 36 LED 0037936462 85 36 7135 6000 ≥75 66 II GRCF 3,0

FASTLED TU

Clips inox150

150

300

450

600

7500˚ 15˚15˚ 30˚30˚

45˚45˚

60˚60˚

75˚75˚

90˚90˚

105˚105˚

120˚180˚

cd/klm

270

0180

90

Semipiani C

270.0180.00 .0

90.0

Angle Gamma

Kg

31

GALLERIE E TUNNEL


ZETA LED 32 OO70832361 52 32 3700 6000 52 65 II NE 5,00

TUNNEL LIGHTING

260

130

41046040

230 70

70

Floodlight for tunnel lighting purpose with 32 power LED. Suitable for illumination of the permanent part in tunnels. Specific primary silicone optic for tunnel light, cut-off. Body of diecast aluminium (EN AG 46100) polyester powder coated in black. Tempered calcic-sodium pro-tection glass of 4mm. Silicone gaskets.Fixing bracket in galvanized steel. On request cable tray fixing clips available for quick installation.On request dimmable and/or remote controlled versions.Cable gland PG13,5 (cable 9÷11 mm). Applicable norms EN 60598-1, EN 60598-2-5, EN6100-3-2, EN 55015Power correction factor > 0,98

ZETA LED

Clips inox200

200

400

600

800

10000˚ 15˚15˚ 30˚30˚

45˚45˚

60˚60˚

75˚75˚

90˚90˚

105˚105˚

120˚180˚

cd/klm

270

0180

90

5175

Semipiani C270.0180.0 0.0

90.0175.0 5.0

Angle Gamma

2 holes 10,5

1 hole 14,0 mm

Kg

32

GALLERIE E TUNNELTUNNEL LIGHTING

Clips inox


BRENNERO 48 LED 007544801 60 48 4700 6000 ≥75 65 II IN 9,7

Floodlight for tunnel lighting purpose with 48 power LED. Suitable for illumination of the permanent part in tunnels. Specific primary silicone optic for tunnel light, cut-off. Body of stainless steel INOX AISI 316-L or 304. Tempered calcic-sodium protection glass of 4mm. Silicone gaskets.Fixing bracket in galvanized steel. On request cable tray fixing clips available for quick installation.On request dimmable and/or remote controlled versions.Nickeled brass cable gland PG16 (cable 11÷15 mm). Applicable norms EN 60598-1, EN 60598-2-5, EN6100-3-2, EN 55015Power correction factor > 0,98

581

314

8550

604

BRENNERO LED

200

200

400

600

800

10000˚ 15˚15˚ 30˚30˚

45˚45˚

60˚60˚

75˚75˚

90˚90˚

105˚105˚

120˚180˚

cd/klm

270

0180

90

5175

Semipiani C270.0180.0 0.0

90.0175.0 5.0

Angle Gamma

Kg

33

GALLERIE E TUNNELFLOODLIGHT

Goniometer


FASTLED PR 10° 0037936447 10° 85 36 6400 4000 ≥75 66 II GRCF 3,0



Floodlight with 36 power LED. Secondary circular optic in 10°, 25° or 40° opening.Body of diecast aluminium polyester powder coated in gunmetal grey. Tempered calcic-sodium protection glass of 4mm. Silicone gaskets.Fixing bracket in galvanized steel. On request with goniometer to fix the floodlight in a specific position.Cable gland M20 (cable 9÷11 mm). Applicable norms EN 60598-1, EN 60598-2-5, EN6100-3-2, EN 55015Power correction factor > 0,98

380427

240

70

35

252

34 34

FASTLED PR

TUNNEL LIGHTING

3000

3000

6000

9000

12000

15000

0˚ 15˚15˚ 30˚30˚

45˚45˚

60˚60˚

75˚75˚

90˚90˚

105˚105˚

120˚180˚

cd/klm

0

90

270

180

380mm x 283mm

Semipiani C

180.0 0.0

270.0 90.0

Angle Gamma

holes 8,5mm

Kg

34



FASTLED PR RGB 10° 0037936947 10° 85 36 - RGB - 65 II GRCF 3,0

FASTLED PR RGB 25° 0037936948 25° 85 36 - RGB - 65 II GRCF 3,0

FASTELD PR RGB 40° 00379336949 40° 85 36 - RGB - 65 II GRCF 3,0

Floodlight with 36 power RGB LED. Secondary circular optic in 25°.Body of diecast aluminium polyester powder coated in gunmetal grey. Tempered calcic-sodium protection glass of 4mm. Silicone gaskets.Fixing bracket in galvanized steel. On request with goniometer to fix the floodlight in a specific position.Cable gland M20 (cable 9÷11 mm). Applicable norms EN 60598-1, EN 60598-2-5, EN6100-3-2, EN 55015Power correction factor > 0,98

380427

240

70

35

252

34 34

FASTLED PR RGB

DMX controler (see page 49)

Goniometer3000

3000

6000

9000

12000

15000

0˚ 15˚15˚ 30˚30˚

45˚45˚

60˚60˚

75˚75˚

90˚90˚

105˚105˚

120˚180˚

cd/klm

0

90

270

180

380mm x 283m m

Semipiani C

180.0 0.0

270.0 90.0

Angle Gamma

holes 8,5mm

Kg

35


PROIETTORI


TIGER LED 10° 003141030 10° 35 30 2450 4000 ≥75 65 II GR 3,0

TIGER LED 25° 003142530 25° 35 30 2450 4000 ≥75 65 II GR 3,0

TIGER LED 35° 003143530 35° 35 30 2450 4000 ≥75 65 II GR 3,0

Floodlight with 30 power LED with secondary optic in 10°, 25° or 35°. Body of diecast aluminium (EN AB 46100) polyester powder coated in grey RAL9006. Tempered calcic-sodium protection glass of 5mm. Silico-ne gaskets. Fixing bracket in galvanized steel.Cable gland M20 (cables 9-11mm).Applicable norms EN 60598-1, EN 60598-2-5, EN6100-3-2, EN 55015Power correction factor > 0,98

35

34

TIGER LED

300

300

600

900

1200

1500

0˚ 15˚15˚ 30˚30˚

45˚45˚

60˚60˚

75˚75˚

90˚90˚

105˚105˚

120˚180˚

cd/klm

H0

V0

Piani VH

H0.0

V0.0

Angle Gamma

holes 8,5mm

Kg

340 29621

4

112

36

GALLERIE E TUNNELOUTDOOR LIGHTING


HORIZONTE I 40° 0036624244 40° 26-55 24 1600 ÷ 2900 4000 ≥75 67 II AL 4,2

HORIZONTE I ASM 0036624249 ASM 26-55 24 1600 ÷ 2900 4000 ≥75 67 II AL 4,2

Inground floodlight with 24 power LED. Secondary optic 40° or asymmetric. Body of extruded aluminium. Tempered calcic-sodium protection glass of 4mm. Silicone gaskets. Inground installation form included.LED driver current can be set to 0,350 – 0,500 – 0,700 mACable gland M12 (cables 4-6mm).Applicable norms EN 60598-1, EN 60598-2-5, EN6100-3-2, EN 55015Power correction factor > 0,98

5290

90

HORIZONTE I LED

700

700

1400

2100

2800

3500

0˚ 15˚15˚ 30˚30˚

45˚45˚

60˚60˚

75˚75˚

90˚90˚

105˚105˚

120˚180˚

cd/klm

0180

90

270

135

315

1502mm x 76mm

Semipiani C

180.0 0.0

270.0 90.0

135.0 315.0

Angle Gamma

Kg

1225

1218BODY INGROUND INSTALLATION FORM

37



HORIZONTE I RGB 40° 0036636294 40° 43 36 - RGB - 67 II AL 4,2

HORIZONTE I RGB ASM 0036636299 ASM 43 36 - RGB - 67 II AL 4,2

Inground floodlight with 24 power RGB LED. Secondary optic 40° or asymmetric. Body of extruded alumi-nium. Tempered calcic-sodium protection glass of 4mm. Silicone gaskets. Inground installation form inclu-ded.On request with DMX or other control systems.Cable gland M12 (cables 4-6mm).Applicable norms EN 60598-1, EN 60598-2-5, EN6100-3-2, EN 55015Power correction factor > 0,98

5290

90

HORIZONTE I LED RGB

700

700

1400

2100

2800

3500

0˚ 15˚15˚ 30˚30˚

45˚45˚

60˚60˚

75˚75˚

90˚90˚

105˚105˚

120˚180˚

cd/klm

0180

90

270

135

315

1502mm x 76mm

Semipiani C

180.0 0.0

270.0 90.0

135.0 315.0

Angle Gamma

Kg

1225

1218BODY INGROUND INSTALLATION FORM

38



HORIZONTE E 40° 0036724244 40° 26-55 24 1600 ÷ 2900 4000 ≥75 65 II GRV 4,5

HORIZONTE E ASM 0036724249 ASM 26-55 24 1600 ÷ 2900 4000 ≥75 65 II GRV 4,5

Wall washer with 24 power LED. Secondary optic 40° or asymmetric. Body of extruded aluminium. Tempered calcic-sodium protection glass of 4mm. Silicone gaskets. Two fixing brackets included.LED driver current can be set to 0,350 – 0,500 – 0,700 mADimmable versions on request.Cable gland M12 (cables 4-6mm).Applicable norms EN 60598-1, EN 60598-2-5, EN6100-3-2, EN 55015Power correction factor > 0,98

1.502

108

76165

HORIZONTE E LED

700

700

1400

2100

2800

3500

0˚ 15˚15˚ 30˚30˚

45˚45˚

60˚60˚

75˚75˚

90˚90˚

105˚105˚

120˚180˚

cd/klm

0180

90

270

135

315

1502mm x 76mm

Semipiani C

180.0 0.0

270.0 90.0

135.0 315.0

Angle Gamma

Kg

39



HORIZONTE E RGB 40° 0036736294 40° 35 36 - RGB - 65 II GRV 4,5

HORIZONTE E RGB ASM 0036736299 ASM 35 36 - RGB - 65 II GRV 4,5

Wall washer with 36 power LED. Secondary optic 40° or asymmetric. Body of extruded aluminium. Tempe-red calcic-sodium protection glass of 4mm. Silicone gaskets. Two fixing brackets included.Dimmable versions on request.Cable gland M12 (cables 4-6mm).Applicable norms EN 60598-1, EN 60598-2-5, EN6100-3-2, EN 55015Power correction factor > 0,98

1.502

108

76165

HORIZONTE E LED RGB

OUTDOOR LIGHTING

700

700

1400

2100

2800

3500

0˚ 15˚15˚ 30˚30˚

45˚45˚

60˚60˚

75˚75˚

90˚90˚

105˚105˚

120˚180˚

cd/klm

0180

90

270

135

315

1502mm x 76mm

Semipiani C

180.0 0.0

270.0 90.0

135.0 315.0

Angle Gamma

Kg

40



TRUCK LED 15° 2700 008021511 15° 18 12 720 2700 ≥75 67 I IN 3,6

TRUCK LED 30° 2700 008023011 30° 18 12 720 2700 ≥75 67 I IN 3,6

TRUCK LED 90° 2700 008029011 90° 18 12 720 2700 ≥75 67 I IN 3,6

TRUCK LED 15° 5600 008021510 15° 18 12 720 5600 ≥75 67 I IN 3,6

TRUCK LED 30° 5600 008023010 30° 18 12 720 5600 ≥75 67 I IN 3,6

TRUCK LED 90° 5600 008029010 90° 18 12 720 5600 ≥75 67 I IN 3,6

In ground floodlight with 12 power LED with secondary optic in 15°, 30° or 90°. Body of diecast aluminium (EN AB 46100) polyester powder coated in black. Tempered calcic-sodium protection. Glass frame of stainless steel INOX AISI 316L. Stainless steel screws. Silicone gaskets. Resistant to static weight of 2500kg. In ground installation pot PA-ED in nylon included.Connection neoprene cable 2x1,5mm² of 2,5m included12V operation, any 12V LED driver (22W min.) in high IP is suitable.Applicable norms EN 60598-1, EN 60598-2-5, EN6100-3-2, EN 55015Power correction factor > 0,98

220

259

255 17

0

TRUCK LED

0

250

500

750

1000

1250

1500

1750

2000

-90 -60 -30 0 30 60 90

cd/klmH0

V0V0

Piani VH

H0.0

V0.0

Kg

41



TRUCK LED RGB 15° 008021518 15° 22 18 - RGB - 67 I IN 4,1

TRUCK LED RGB 30° 008023018 30° 22 18 - RGB - 67 I IN 4,1

In ground floodlight with 18 power RGB LED with secondary optic in 15° or 30°. Body of diecast alumi-nium (EN AB 46100) polyester powder coated in black. Tempered calcic-sodium protection. Glass frame of stainless steel INOX AISI 316L. Stainless steel screws. Silicone gaskets. Resistant to static weight of 2500kg. In ground installation pot PA-ED in nylon included.Connection neoprene cable 6x1,5mm² of 2,5m included (L-N-E +DMX)12V operation, any 12V LED driver (22W min.) in high IP is suitable.External DMX controller needed.Applicable norms EN 60598-1, EN 60598-2-5, EN6100-3-2, EN 55015Power correction factor > 0,98

220

259 17

0

TRUCK LED RGB

DMX controler (see page 49)

OUTDOOR LIGHTING

255

0

250

500

750

1000

1250

1500

1750

2000

-90 -60 -30 0 30 60 90

cd/klmH0

V0V0

Piani VH

H0.0

V0.0

Kg

42

GALLERIE E TUNNELINDOOR LIGHTING


MAGALED ASM 0038564249 ASM 115 64 9000 Im 4000 K ≥75 20 II AL 9,7

Floodlight with 64 Power LED with seconday asymmetric optic 18x36°. Suitable for shop or warehouse aisle illumination. Body of anodized extruded aluminium. Fixing plates made of galvanized steel, included.Applicable norms EN 60598-1, EN 60598-2-5, EN6100-3-2, EN 55015Power correction factor > 0,98

160

103,

5

85

113

103,5

MAGALED

700

700

1400

2100

2800

3500

0˚ 15˚15˚ 30˚30˚

45˚45˚

60˚60˚

75˚75˚

90˚90˚

105˚105˚

120˚180˚

cd/klm

0180

90

270

135

315

1502mm x 76mm

Semipiani C

180.0 0.0

270.0 90.0

135.0 315.0

Angle Gamma

Kg

2100

43


Recessed LED lighting fixture. Optical system by prismatic microdiffuser. Electronic dimmable DALI dri-ver. Emergency execution on request. Body of steel sheet. Frame of estrude aluminium profiles. Diffuser in PMMA. Powdercoated in white RAL9003 colour. For ambient temperature of up to 35°C. Lifetime expectancy 50.000hF1 version for mounting inside false ceiling structureF2 version for mounting below false ceiling structureAccessories for installation in plasterboard ceilings on request.

919

571

595

573

595

DESCRIPTIONCode Power Lumen Kelvin CRI IP Class Colour Weight

MAYA LED F1 DALI 0197945150F1DALI 120° 52 4500 5000 >80 40 I BI 6,3

MAYA LED F2 DALI 0197945150F2DALI 120° 52 4500 5000 >80 40 I BI 6,3

MAYA

INDOOR LIGHTING

80

80

160

240

320

400

0˚ 15˚15˚ 30˚30˚

45˚45˚

60˚60˚

75˚75˚

90˚90˚

105˚105˚

120˚180˚

cd/klm

0

180

90

270

17.5

197.5

595mm x 595mm

Semipiani C

180.0 0.0

270.0 90.0

17.5

Angle Gamma

Kg

44



INCA 125 2700 BI 0197307126 63° 15 700 2700 90 20 I BI 0,4

INCA 125 2700 GR 0197307226 63° 15 700 2700 90 20 I GR 0,4

INCA 125 4000 BI 0197307146 63° 15 700 4000 90 20 I BI 0,4

INCA 125 4000 GR 0197307246 63° 15 700 4000 90 20 I GR 0,4

Recessed LED lighting fixture. Direct light.Body and frame of steel powdercoated in white RAL9003 or grey RAL9006Anodized aluminium reflector.For ambient temperature of up to 35°C. Lifetime expectancy 25.000h

INCA 125

180

25

MIN.

125 125

107

125

FORO INCASSODIAMETRO 110 mm

maximum ThicKness

FORO INCASSODIAMETRO 110 mm

250

250

500

750

1000

1250

0˚ 15˚15˚ 30˚30˚

45˚45˚

60˚60˚

75˚75˚

90˚90˚

105˚105˚

120˚180˚

cd/klm

0

180

Diam=125mm

Semipiani C

180.0 0.0

Angle Gamma

Cut out of 110 mm diameter

Kg

45



INCA 184 12 DIM 60° 0197406126DIM 60° 12 650 2700 > 90 44 I BI 0,7

INCA 184 12 DIM 74° 0197406127DIM 74° 12 650 2700 > 90 44 I BI 0,7

INCA 184 15 4 DIM 60° 0197409146DIM 60° 15 900 4000 > 90 44 I BI 0,7

INCA 184 15 4 DIM 74° 0197409147DIM 74° 15 900 4000 > 90 44 I BI 0,7

INCA 184 15 DIM 60° 0197409136DIM 60° 15 900 3000 > 90 44 I BI 0,7

INCA 184 15 DIM 74° 0197409137DIM 74° 15 900 3000 > 90 44 I BI 0,7

INCA 184 27 DALI 60° 0197418136DALI 60° 27 1800 3000 > 90 44 I BI 1,5


INCA 184 27 4 DALI 60° 0197418146DALI 60° 27 1800 4000 > 90 44 I BI 1,5






Recessed LED lighting fixture. Direct light.Body of polycarbonate and frame of steel powdercoated in white RAL9003 Reflector of specular polished aluminium. Optical opening angles of 60° or 74°Dimmable driver for 12W and 15W versions.Mounting plate for T profile false ceilings on request.

INCA 184

INDOOR LIGHTING

4150

184

220MIN.FORO INCASSO

DIAMETRO 110 mm

250

250

500

750

1000

1250

0˚ 15˚15˚ 30˚30˚

45˚45˚

60˚60˚

75˚75˚

90˚90˚

105˚105˚

120˚180˚

cd/klm

0

180

Diam=185mm

Semipiani C

180.0 0.0

Angle Gamma


Kg

46



INCA 236 13 DK 0197511140DK 99° 13 1100 4000 80 20-44 I BI 1,5INCA 236 15 DK 0197511130DK 99° 15 1100 3000 80 20-44 I BI 1,5INCA 236 26 DK 0197520140DK 99° 26 2000 4000 80 20-44 I BI 1,9INCA 236 28 DK 0197520130DK 99° 28 2000 3000 80 20-44 I BI 1,9INCA 236 46 DK 0197530140DK 99° 46 3000 4000 80 20-44 I BI 2,4INCA 236 40 DK 0197509190DK 99° 40 900 RGB W 80 20-44 I BI 2,4

INCA 236 13 SV 0197511140SV 99° 13 1100 4000 80 20-44 I BI 1,5INCA 236 15 SV 0197511130SV 99° 15 1100 3000 80 20-44 I BI 1,5INCA 236 26 SV 0197520140SV 99° 26 2000 4000 80 20-44 I BI 1,9INCA 236 28 SV 0197520130SV 99° 28 2000 3000 80 20-44 I BI 1,9INCA 236 46 SV 0197530140SV 99° 46 3000 4000 80 20-44 I BI 2,4INCA 236 40 SV 0197509190SV 99° 40 900 RGB W 80 20-44 I BI 2,4

RGB W RGB + Intelligent white - da 2700 a 6500 K

Recessed LED lighting fixture. Direct light.Body of and frame of galvanized steel powdercoa-ted in white RAL9003.Specular metalized polycarbonate (DK) or white (SV) reflector. Optical opening angle of 99°Driver with active temperature control for 2000 and 3000lm versionsDriver with passive temperature control for 1100lm versionsOn request dimmable drivers available (10-100%)Mounting plate for T profile false ceilings on re-quest.3-pole connectors Wieland GST 18i3 or Wago Win-sta 770 on requestStandard version in IP20, IP44 with diffuser or de-corative glass on request

INCA 236 DK - SV

SV

DK

45378

453

125

236220

250MIN.

100

100

200

300

400

500

0˚ 15˚15˚ 30˚30˚

45˚45˚

60˚60˚

75˚75˚

90˚90˚

105˚105˚

120˚180˚

cd/klm

0

180

Diam=236mm

Semipiani C

180.0 0.0

For IP44 version, o r d e r c los ing glass

Angle Gamma


Kg

47


Recessed LED lighting fixture. Direct light.Body and frame of of steel powdercoated in white RAL9003 Reflector of polished aluminium. Dimmable DALI driver on request.


INCA Q 13 0197711148 80° 13 1050 4000 80 20 I BI 2

INCA Q 15 0197711138 80° 15 1050 3000 80 20 I BI 2

INCA Q 26 0197720148 80° 26 1950 4000 80 20 I BI 2

INCA Q 28 0197720138 80° 28 1950 3000 80 20 I BI 2

INCA Q 46 0197730148 80° 46 2950 4000 80 20 I BI 2

INCA Q 50 0197730138 80° 50 2950 3000 80 20 I BI 2

INCA Q

INDOOR LIGHTING

226

100 22

6

150MIN.

250

250

500

750

1000

1250

0˚ 15˚15˚ 30˚30˚

45˚45˚

60˚60˚

75˚75˚

90˚90˚

105˚105˚

120˚180˚

cd/klm

0

180

Diam=185mm

Semipiani C

180.0 0.0

Angle Gamma

Cut out of 210x210 mm

Kg

48

GALLERIE E TUNNEL

CODE Input V DC W/m LED/m IP ColourDimensions

mm

FS353020xxyy 12 0 24 1,8 ÷ 2,4 30 20 WHITE 8 x 5000

FS356020xxyy 12 0 24 4,8 60 20 WHITE 8 x 5000

FS356065xxyy 12 0 24 4,8 60 65 WHITE 8 x 5000

FS356067xxyy 12 0 24 4,8 60 67 WHITE 8 x 5000

FS503020xxyy 12 0 24 7,2 30 20 WHITE 10 x 5000

FS503065xxyy 12 0 24 7,2 30 65 WHITE 10 x 5000

FS506020xxyy 12 0 24 14,4 60 20 WHITE 10 x 5000

FS506065xxyy 12 0 24 14,4 60 65 WHITE 10 x 5000

FS506067xxyy 12 0 24 14,4 60 67 WHITE 10 x 5000

FS503020xxRGB 12 0 24 7,2 30 20 RGB 10 x 5000

FS503065xxRGB 12 0 24 7,2 30 65 RGB 10 x 5000

FS506020xxRGB 12 0 24 14,4 60 20 RGB 10 x 5000

FS506065xxRGB 12 0 24 14,4 60 65 RGB 10 x 5000

FS506067xxRGB 12 0 24 14,4 60 67 RGB 10 x 5000

Flexible LED strip in indoor IP20 and outdo-or IP65 and IP67 version.Colour temperatures of 2700°K, 4000°K and 5000°K in white or RGBSupplied in 5m rolls. Can be cut in any part to allow various length requirements.End caps and supply cable are included.Requires external LED driver (12V DC or 24V DC), wattage according to W/m, normal or specific for RGB LED.3M double sided glue tape included.

To complete the product code when ordering please substitute the following variables:

xx -> supply tension : 12 for 12V DC or 24 for 24V DCyy -> colour temperature: 2k for 2700°K or 4k for 4000°K or 5k for 5000°K

Example given:

FS503065xxyy -> FS503065122k = IP65 strip 30 Led/m 12V DC 2700°K

LED STRIP

49

GALLERIE E TUNNEL

Standalone DMX controlling device

DMX interface suitable for light scene progamma-

tion.

Needs to be configurated. Easy configuration

through specific program (32bit).

Connection to PC via USB port. After programma-

tion the controller can work as a standalone device.

Memory in stand alone mode.

Connection to network by XLR connector

Cables for connection not included

In stand alone mode the device has to be con-

nected to a 5V DC power supply unit with USB con-

nection (not included)

Software for configuration and light scene mana-

gement included

Recommended use with VST DMX power supply

Management: DMX 512

Power supply: DC 5 V

DMX channels: 60

CONTROLLER DMX

DESCRIPTION Code USB

Channels DMX Gates Memory capability Dimensions(mm)

WeightLive

modeStand alone

IN/OUT DMX

channels20 60 125

L L1 B H

Controller DMX

00054632 1,1 128 60 4 + 2 125 sTeps 45 sTeps - 90 92 79 40 93

Kg

50

GALLERIE E TUNNEL

Notes

51

GALLERIE E TUNNEL

Printed GRAFICHE LUVRITI (Provaglio di Iseo • Bs)

october 2012

select Lightwww.Select-Light.comLighting Shop

Tienda, Proyectos y Distribución

Light

+34 902 995 715

Documents

GALLERIE E TUNNEL - Select Light · 5 GALLERIE E TUNNEL image 3 image 4 sibilities of energy saving which up to then were unthinkable. The LED technology reached in the last years