No. 1254 Restraint Clamp (Socket to Pipe)

of ductile iron EN-GJS-400-18 according to EN 1563 (GGG 400 - DIN 1693), epoxy powder coated

Grip ring Ms 58 (CuZn36Pb3)

No. 9240 Split Collar (Pipe to Pipe)

Body: ductile iron EN-GJS-400-18 according to EN 1563

(GGG 400 - DIN 1693), epoxy powder coated

Grip ring: Ms 58 (CuZn36Pb3)

Bolts: A2 DIN 933

Seal: elastomer, suitable for potable water

Restraint Systems for PVC pipes

G 7/14. 2007

Product name Order no. PNDimensions/DN PVC pipe mm

5063

6575

8090

100110

125140

150160

200225

250280

300315

Restraint Clamp1254

PN 10*PN10 + PN 16 * * *

1255 PN 16

Split Collar 9240 PN 10

Restraint Systems for PVC pipes

The Restraint Clamp for all PVC pipes and sockets.

The 2-part body can be assembled onto an existing pipeline. If required it can be dismantled and reused.

The grip ring is self tightening within its tapered seating. The design of the teeth avoids cutting into the pipe resulting in the highest gripping force without pipe damage.

Wedge fastening on both sides. Hammer the wedges until the clamp is tightly closed.

No. 9240 Split Collar

Restraint connection for 2 spigot ends; can also be used as a repair coupling

The teeth of the grip ring do not abrade the pipe; it is not necessary to chamfer the pipe.

For thick walled PE pipes and for joining PE pipes to PVC pipes. For thin walled PE pipes support liners should be used.

No. 1254 Restraint Clamp

G 7/24. 2007Illustrations, technical data, dimensions and weights are subject to alteration without notice.

DN PVC-pipe

B L Weight kg

No. 1254/1255 No. 9240 No. 1254/1255 No. 9240 No. 1254/1255 No. 9240

50 63 180 91 2,5

65 75 200 156 96 170 2,8 3,4

80 90 220 174 103 174 3,0 4,5

100 110 240 196 110 195 3,5 5,8

125 140 280 228 123 220 3,9 7,3

150 160 300/320 254 140/152 245 6,0 10,5

200 225 380/400 332 165/185 350 9,5 21,0

250 280 455 195 13,5

300 315 495 200 16,3