Full range of efficient and reliable submersible mixers and flowmakers ...notesfile... · Powerful advantages > Lifelong reliability Grundfos mixers and flowmakers are of a robust

Powerful advantages

> Lifelong reliability

Grundfos mixers and flowmakers are of arobust construction, designed for continu-ous operation under the most difficult oper-ating conditions.

> Energy-saving efficiency

Modular motors and planetary gear systemsmake the mixers and flowmakers highly de-pendable and very efficient with low operatingcosts.

> Easy maintenance

State-of-the-art design and sturdy construc-tion reduce wear and tear and allow forquick and easy once-a-year maintenance.

Grundfos Mixers and flowmakers

> 2

Full range of efficient and reliablesubmersible mixers and flowmakersfor wastewater and sludgeGrundfos offers a complete range of extremely de-pendable and highly efficient submersible mixersand flowmakers for a variety of processes in waste-water treatment plants.

The mixers and flowmakers are designed for use inthe toughest environments. The mixers and flow-

makers are of a modular design,which makes them easy to

maintain and service. Allparts are manufacturedfrom specially selectedmaterials, and each com-ponent is thoroughly tested

for reliability and durabilitybefore assembly.

Direct or planetary gear driveThe Grundfos range of mixers is available with eitherdirect driven or planetary gear driven propellers, de-pending on the model. The stainless steel or polya-mide propellers are designed for high efficiency evenunder heavy-duty operating conditions.

> 3

A wide variety of applications

The Grundfos range of mixers and flow-

makers is ideally suitable for a variety

of applications in wastewater treatment,

industrial processes, construction, agri-

culture and aquaculture.

Municipal wastewater treatment> Pumping stations

> Storm water tanks

> Biological treatment of activated sludge

> Treatment of primary wastewater

> Treatment of secondary wastewater

> Treatment of digested sludge

> Sludge storage tanks

> Homogenization tanks

Industrial processes

> Paper industry

> Paint and dye-stuff mixing

> Chemical industry

> Other industrial homogenization processes

Sludge treatment> Homogenizing storage and thickener sludge

> Digesting processes

> Degassing and lime storage mixing

Agriculture> Slurry

4

State-of-the-art design…

Insulation of winding threads

Special protection of the wind-ings, carefully made by hand, en-sure full protection also after longperiods of operation.

Stable motor bracket

Galvanic separation prevents anyelectro-chemical corrosion. Thepower cable is secured againsttearing away by a strong holdingclamp.

Watertight cable entry

Watertight to 30 metres. Pro-tects the power cable with a soft shaped sealing ring. The cable entry complies with the specifications for explosion-proof machinery.

Dielectric oil

Improves the heat transfer com-pared with conventional air-cool-ing. The motor has a higher effi-ciency and there is no problemwith humidity formation. Add tothis, it allows a more compactdesign.

Active electronic leak sensor

Indicates possible liquid in thegear housing. Even the smallestquantity will be quickly detected.Thus service can be carried outbefore any damage is done.

5 Details > 5

with many unique features

Shaft sealing

The radial shaft sealing rings pro-tect the mechanical shaft seal sys-tem from abrasive parts. Duringmaintenance only the less expen-sive radial shaft sealing rings needto be changed.

Propeller hub and shaft

Change of propeller during main-tenance is quick and easy. Specialtools are not required.

Computer designed propellers

The hydrodynamically opti-mised propellers have been de-signed by computer animation.The three-dimensional freeareas increase efficiency andprevent clogging.

Planetary gear

The best solution to transfer axialforces, thus the high efficiency of97%. Slim design provides an op-timal hydrodynamic shape.

Two bearings

The shaft rests on two roller bear-ings, which accommodate bothaxial and radial forces present inmixers and flowmakers.

Technical data > 6

Protection features and type key

Potentially explosive environmentsIn potentially explosive environments,the explosion-proof Grundfos mixer orflowmaker must be used.

Note!The explosion protection classification of the mixersand flowmakers is EEx eo II T1/T2, EEx eo II T3 or EEx eo II T4 for Ex-zones 1+2. The classification of theinstallation must in each individual case be approvedby the local authorities.

Material specification

Corrosion protectionTo ensure long and trouble-free operation, the mixers/flowmakers are protected against corrosion with ahigh-grade multi-layer corrosion system.

Type key

Component Material DIN/EN Mixer/flowmaker

Bottom fixationColumn profile tube 1.4306 304LMotor bracket 1.4404 316L All typesTop fixation 1.0037 -Depth blockerPull and safety chain Stainless steel 1.4404 316L AMD, AMGMotor casing Cast iron, grade 25 (EN-GJL-250) EN-JL1040 All typesSeal casing Cast iron, grade 25 (EN-GJL-250) EN-JL1040 AMDGearbox casing Cast iron, grade 25 (EN-GJL-250) EN-JL1040 AMG, AFGStand with winch 1.4306 304LCrane boom 1.4404 316Lwith winch 1.0037 - 1.4306 304LCrane with chain 1.4404 316L Sealedhoist and chain 1.0037 - installation - - Stainless steel 1.4306 304L AMD, AMG AFG.15.130.76 AFG.22.130.77 AFG.30.130.92 AFG.40.130.93 AFG.15.230.22 AFG.22.230.25 AFG.30.230.29 AFG.40.230.35

1.4306 304L AMG AFG.15.130.76 AFG.22.130.77 AFG.30.130.92 AFG.40.130.93 AFG.15.230.22 AFG.22.230.25 AFG.30.230.29 AFG.40.230.35

AISI/ ASTM

Stainless steelor galvanized steel

Stainless steelor galvanized steel

Stainless steelStainless steel

Galvanized steelAluminium

Standardinstallation

Cast iron (EN-GJS-400-15)

Propeller

Hub

Ductile, moulded polyamide

Epoxy resin (Baydur®)with cast iron (EN-GJS-400-15)

reinforcement

EN-JS1030

Cast iron, NiCrNb 20 2(Ni-Resist/D-2)

AMD

Stainless steel1.4306 304L

EN-JS1030

Example A M G .15 .40 .325 .EType rangeVersion:M = MixerF = FlowmakerDrive:D = DirectG = GearPower output, P2 [kW] x 10Propeller diameter [cm]Propeller speed [min-1]Explosion-proof

Technical data > 7

Technical data

Pow

er o

utp

ut,

PN

[kW

]

Pow

er in

pu

t, P

1 [kW

]

AMD.18.32.950 1.8 2.25 230/400 S1, star 950 6.0 0.73 24.8 786 2.72AMD.28.39.930 2.8 3.50 400/690 S1, delta 930 7.5 0.76 31.3 1153 2.68AMG.15.40.325 1.5 1.88 S1, star 325 4.2 0.75 21.0 1058 2.15AMG.22.45.325 2.2 2.75 S1, star 325 6.0 0.78 30.0 1350 2.34AMG.30.47.328 3.0 3.75 S1, delta 328 7.3 0.79 38.7 1629 2.50AMG.40.52.326 4.0 5.00 S1, delta 326 9.2 0.78 42.3 2118 2.72AMG.55.50.335 5.5 6.88 S1, delta 335 12.9 0.82 65.8 2315 3.21AMG.75.58.336 7.5 9.38 400/690 S1, delta 336 16.4 0.84 98.4 3234 3.40AMG.110.68.334 11.0 13.70 S1, delta 334 24.0 0.87 124.8 4563 3.49AMG.150.73.354 15.0 18.70 S1, delta 354 33.0 0.76 191.4 5907 3.92AMG.185.78.351 18.5 23.10 S1, delta 351 39.0 0.88 241.8 6985 4.06AFG.15.130.76 1.5 1.84 S1, star 76 4.2 0.67 21.0 5874 1.23AFG.22.130.77 2.2 2.70 S1, star 77 6.0 0.78 30.0 6782 1.42AFG.30.130.92 3.0 3.75 S1, delta 92 7.3 0.78 38.7 7546 1.58AFG.40.130.93 4.0 5.00 S1, delta 93 9.2 0.83 42.32 8453 1.77

AFG.15.230.22 1.5 1.88 S1, star 22 5.2 0.52 24.0 10470 0.70

AFG.22.230.25 2.2 2.75 S1, star 25 6.4 0.63 29.0 12265 0.82

AFG.30.230.29 3.0 3.75 S1, delta 29 8.6 0.66 41.3 15556 1.04

AFG.40.230.35 4.0 5.00 S1, delta 35 10.0 0.73 43.7 17500 1.17

1) If the liquid viscosity exceeds that of water, the mixer can operate up to this figure without any problems. Operation in water gives lower values.2) Applies to 400 V mains voltage.

6

4

6

4

A07RN-F12G1.5

A07RN-F12G2.5

A07RN-F12G4

A07RN-F12G1.5

3

2

3

230/400

230/400

230/400

400/690

400/690

Mixer/flowmaker

960948419609484296094843960948449609484596094846960948479609484896094849960948509609485196094852960948539609485496094855

96094856

96094857

96094858

96094859

Rat

ed m

otor

vol

tage

[V]

Prod

uct

nu

mb

ers

Cab

le t

ype

(8 m

lon

g)

Nu

mb

er o

f p

oles

Op

erat

ing

mod

e 2)

Prop

elle

r sp

eed

[min

-1]

I N [A

] 2)

Cos

Star

tin

g cu

rren

t [A

]

Nu

mb

er o

f b

lade

s

Cap

acit

y [m

3 /h

]

Mea

n v

eloc

ity

[m/s

]

Mains voltage [V] 3 x 400Voltage tolerance [%] ±10Mains frequency required [Hz] 50Thermal sensor type PTC or PTOThermal switch cut-out temperature [°C] 130Enclosure class IP 68Insulation class FMax. installation depth [m] 30Max. liquid temperature [°C] 40Max. number of starts/hour 20Cable length [m] 8

Mixers > 8

Selection guide of Grundfos Mixers

This selection guide is for guidance only. For further information please contact Grundfos.The selection charts (curves) for the Grundfos mixers are based on square and circular tank shapes.

Application 2

Application 1

0 5 10 15 20 25 30 35

0

500

1000

1500

2000

[m3]

[W/m3]

Tank volume

Required energy

Example:1200

Example: 120 20 40 60 80 100 120

0

10

20

30

40

50

60

70

80

90

100

[m3]

[W/m3]

Tank volume

Required energy

Application 1

Application 2

Application 3

Application 4

Application 1Activated sludgeSelector zonesAnoxic zonesBivalent zonesAnaerobic zones

Application 2Primary sludge 3% solid contentsSecondary sludge 6% solid contentsDigested sludge 8% solid contents

Application 3Pump sump without screen

Application 4Pump sump with sand

AMD.18.32.950 1.8 13 m 6 m 2.5 m 3.5 m AMD.28.39.930 2.8 19 m 9 m 3.5 m 5.0 m AMG.15.40.325 1.5 20 m 10 m 4.0 m 5.5 m AMG.22.45.325 2.2 22 m 11 m 4.5 m 6.0 m AMG.30.47.328 3.0 24 m 12 m 5.0 m 6.5 m AMG.40.52.326 4.0 26 m 13 m 5.5 m 7.0 m AMG.55.50.335 5.5 31 m 15 m 6.0 m 8.6 m AMG.75.58.336 7.5 37m 18 m 7.5 m 10.0 m AMG.110.68.334 11.0 45 m 22 m 9.0 m 12.5 m AMG.150.73.354 15.0 55 m 27 m 11.0 m 15.0 m AMG.185.78.351 18.5 65 m 30 m 13.0 m 18.0 m

Maximum tank length for one mixer [m]

Application 1 Application 2 Application 3 Application 4 Mixer type Motor power

P2 (kW)

ExampleFor tank volumes larger than 2500 m3, please usethe required energy value for 2500 m3.Step 1 Select curve for application in question using

the above definitions, for instance Application 2.Step 2 Select tank volume, for instance 1200 m3.Step 3 Use the curve chart to determine required

energy. This example = 12 W/m3 primary sludge.

Step 4 Calculate required power input, using thisformula:

Req. energy 12 W/m3 x tank volume 1200 m3

= 14.4 kW.1000

Result: 1 unit of AMG.150.73.354, which will provide a power output of 15 kW (14.4 kW is required).Alternatively select 2 units of AMG.75.98.336.Check that the maximum tank length is notexceeded. If this is the case the requiredenergy must be split onto more mixersinstalled in series.

Flowmakers > 9

Selection guide of Grundfos Flowmakers

0 2 4 6 8 10 12

0

500

1000

1500

2000

2500

3000

3500

4000

4500

5000

Shape 1

Shape 2

Shape 3, Shape 5

Shape 4

Shape 6

Shape 7

AFG.X.230.X

[m3]

[W/m3]

Tank volume

Required energy

Example:1300

Example: 2.1

The selection charts (curves) for the Grundfos Flowmakers are based on activated sludge and a velocity of 0.3 m/sec., and a relation between tank length and width of 4:1.

Shape 1: Shape 2: Shape 3: Shape 4: Shape 5: Shape 6: Shape 7:

AFG.X.130.X Power output (kW) AFG.15.130.76 1.5 kW AFG.22.130.77 2.2 kW AFG.30.130.92 3.0 kW AFG.40.130.93 4.0 kW

AFG.X.230.X Power output (kW) AFG.15.230.22 1.5 kW AFG.22.230.25 2.2 kW AFG.30.230.29 3.0 kW AFG.40.230.35 4.0 kW

0 2 4 6 8 10 12

0

500

1000

1500

2000

2500

3000

AFG.X.130.X

Shape 6

Shape 4

Shape 3, Shape 5

Shape 2

Shape 1

[m3]

[W/m3]

Tank volume

Required energy

Example:1300

Example: 3.2

Example 2 – AFG.X.230.X:If the tank space allows it, choose an AFG.X.230.22,using the following procedure.For tank volumes larger than 5500 m3, please usethe required energy value for 5500 m3.

Step 1 Same as Example 1.Step 2 Same as Example 1.Step 3 Use the curve chart to determine required

energy. This example = 2.1 W/m3 activated sludge.

Step 4 Calculate required power input:

Req. energy 2.1 W/m3 x tank volume 1300 m3

= 2.7 kW.1000

Result: 1 unit of AFG.30.230.29, which will provide a power output of 3 kW (2.7 kW is required).

Example 1 – AFG.X.130.XAlways evaluate installation space before selectingthe particular flowmaker model.For tank volumes larger than 3500 m3 (dependingon the flowmaker model), please use the requiredenergy value for 3500 m3.

Step 1 Select the shape of the tank, for instanceshape 4.

Step 2 Select the tank volume, for instance 1300 m3.Step 3 Use the curve chart to determine required

energy.This example = 3.2 W/m3 activated sludge.

Step 4 Calculate required power input, using thisformula:

Req. energy 3.2 W/m3 x tank volume 1300 m3

= 4.2 kW.1000

Result: 2 units of AFG.22.130.77, which combinedwill provide a power output of 4.4 kW (4.2 kWis required).

> 10

Installation options and accessories

AccessoriesThe following section describes various installationoptions and the range of accessories available foreach option.

Accessories > 11

AMD

1 Bottom fixation, horizontal1a Bottom fixation, inclined (0-90°)2 Column profile tube4 Motor bracket5 Top fixation6 Pull and safety chain9 Stand with winch

Pos. Accessories

1 Bottom fixation, horizontal 2 Column profile tube 4 Motor bracket 5 Top fixation 6 Pull and safety chain 9 Crane with chain hoist 11 Turning key

Pos. Accessories

Standard installation Sealed installation

Accessories > 12

AMD

1.4306 304L 96490756 1.4404 316L 96490757 Galvanized steel 1.0037 - 96490758

Mixer Material DIN W.-Nr. AISI Product numberColumnsize

AMD.18.32.950AMD.28.39.930

60/60Stainless steel

Top fixation standard installation with turnable lock



AMD.18.32.950AMD.28.39.930


Top fixation sealed installation



AMD.18.32.950AMD.28.39.930


Stand with winch. The winch includes 8 m wire for 5 m tank depth standard installation


Mixer Material DIN W.-Nr. AISI Product number

AMD.18.32.950AMD.28.39.930

Stainless steel

Crane with chain hoist and chain sealed installation

Mixer Material DIN/EN AISI Product number

AMD.18.32.950AMD.28.39.930

Stainless steel 1.4404 316L 96490869

Mixer Description Product number

AMD.18.32.950AMD.28.39.930

Key for sealed installation 96494522

Pull and safty chain, 6 m sealed installation

Turning key sealed installation

Stainless 1.4306 304L 96490666AMD.18.32.950 Horizontal/inclined steel 1.4404 316L 96490667AMD.28.39.930 (0-90°) Galvanized steel

Mixer Type Material DIN W.-Nr. AISI Product numberColumnsize

60/60

1.0037 - 96490668

Bottom fixation



AMD.18.32.950AMD.28.39.930

60/60 Stainless steel

Motor bracket standard installation



AMD.18.32.950AMD.28.39.930

60/60 Stainless steel

Motor bracket sealed installation

Accessories > 13

AMG.15.X.X to AMG.40.X.X

1 Bottom fixation, horizontal1a Bottom fixation, inclined (0-90°)2 Column profile tube3 Depth blocker4 Motor bracket5 Top fixation Crane boom with winch or stand with winch

Pos. Accessories

9

1 Bottom fixation, horizontal1a Bottom fixation, inclined (0-90°)2 Column profile tube3 Depth blocker4 Motor bracket5 Top fixation6 Pull and safety chain9 Crane with chain hoist

Pos. Accessories

1.4306 304L 96490669 1.4404 316L 96489417 Galvanized steel 1.0037 - 96490672 1.4306 304L 96490673 1.4404 316L 96489418 Galvanized steel 1.0037 - 96490674


80/80

80/80

AMG.15.40.325AMG.22.45.325AMG.30.47.328AMG.40.52.326

Horizontal

Horizontal/inclined(0-90°)

Stainless steel

Stainless steel

Bottom fixation

Standard installation Sealed installation

1.4306 304L 96490714 1.4404 316L 96490717 1.0037 - 96490721


80/80

AMG.15.40.325AMG.22.45.325AMG.30.47.328AMG.40.52.326

For clampingStainless steel

Galvanized steel

Depth blocker

Accessories > 14


1.4306 304L 96489465 1.4404 316L 96489466 1.0037 - 96490734


80/80

AMG.15.40.325AMG.22.45.325AMG.30.47.328AMG.40.52.326

Stainless steel

Galvanized steel


1.4306 304L 96490735 1.4404 316L 96490736 1.0037 - 96490737


80/80

AMG.15.40.325AMG.22.45.325AMG.30.47.328AMG.40.52.326

Stainless steel

Galvanized steel


1.4306 304L 96489491 1.4404 316L 96489492 1.0037 - 96489493


80/80AMG.15.40.325AMG.22.45.325AMG.30.47.328AMG.40.52.326

Stainless steel

Galvanized steel


1.4306 304L 96489524 1.4404 316L 96489525 1.0037 - 96489601


80/80

AMG.15.40.325AMG.22.45.325AMG.30.47.328AMG.40.52.326

Stainless steel

Galvanized steel


1.4306 304L 96490774 1.4404 316L 96490776 1.0037 - 96490777


80/80

AMG.15.40.325AMG.22.45.325AMG.30.47.328AMG.40.52.326

Stainless steel

Galvanized steel

Crane boom with winch. The winch includes 8 m wire for 5 m tank depth

1.4306 304L 96490818 1.4404 316L 96490819 1.0037 - 96489562


80/80

AMG.15.40.325AMG.22.45.325AMG.30.47.328AMG.40.52.326

Stainless steel

Galvanized steel

Stand with winch. The winch includes 8 m wire for 5 m tank depth



AMG.15.40.325AMG.22.45.325AMG.30.47.328AMG.40.52.326

Stainless steel



AMG.15.40.325AMG.22.45.325AMG.30.47.328AMG.40.52.326




AMG.15.40.325AMG.22.45.325AMG.30.47.328AMG.40.52.326

Key for turning the column profile tube 96494545


Accessories >15


1 Bottom fixation, horizontal 1a Bottom fixation, inclined (0-90°) 2 Column profile tube 3 Depth blocker 4 Motor bracket 5 Top fixation 9 Stand with winch 10 Crane boom with winch12 Reduction piece, 120-100 mm

Pos. Accessories

1 Bottom fixation, horizontal 1a Bottom fixation, inclined (0-90°) 2 Column profile tube 3 Depth blocker 4 Motor bracket 5 Top fixation 6 Pull and safety chain 9 Crane with chain hoist 11 Turning key

Pos. Accessories

Standard installation Sealed installation (only possible AMG.55.X.X to AMG.110.X.X)

Accessories >16




100/100

100/100

AMG 55.50.335AMG.75.58.336AMG.110.68.334AMG.150.73.354AMG.185.78.351

Horizontal

Horizontal/inclined(0-90°)

Stainless steel

Stainless steel

Bottom fixation



100/100AMG 55.50.335AMG.75.58.336AMG.110.68.334AMG.150.73.354AMG.185.78.351

For clamping

120/120For clamping

Stainless steel

Stainless steel

Depth blocker

1.4306 304L 96489469 1.4404 316L 96489480

1.4306 304L 96489481 1.4404 316L 96489482

1.4306 304L 96490741 1.4404 316L 96490742

1.4306 304L 96490745 1.4404 316L 96490746


100/100

120/120

100/100

120/120

AMG 55.50.335AMG.75.58.336AMG.110.68.334

Stainless steel

Galvanized steel 1.0037 - 96490738




Stainless steel

Stainless steel

Stainless steel

AMG.150.73.354AMG.185.78.351


1.4306 304L 96493202 1.4404 316L 96493203


100/100AMG 55.50.335AMG.75.58.336AMG.110.68.334

Stainless steel



1.4306 304L 96489494 1.4404 316L 96489495

1.4306 304L 96489389 1.4404 316L 96489520


100/100

120/120

AMG 55.50.335AMG.75.58.336AMG.110.68.334AMG.150.73.354AMG.185.78.351

Stainless steel



Stainless steel


1.4306 304L 96489526 1.4404 316L 96489527


100/100AMG 55.50.335AMG.75.58.336AMG.110.68.334

Stainless steel



17 Accessories >

1.4306 304L 96489559 1.4404 316L 96490778

1.4306 304L 96489560 1.4404 316L 96490780

1.4306 304L 96490810 1.4404 316L 96490811

1.4306 304L 96490813 1.4404 316L 96490814


100/100

120/120

100/100

120/120

AMG 55.50.335AMG.75.58.336AMG.110.68.334

Stainless steel





Stainless steel

Stainless steel

Stainless steel

AMG.150.73.354AMG.185.78.351

Crane boom with winch, the winch includes 8 m wire for 5 m tank depth standard installation

1.4306 304L 96490820 1.4404 316L 96490821

1.4306 304L 96490822 1.4404 316L 96490823

1.4306 304L 96490824 1.4404 316L 96490825

1.4306 304L 96490829 1.4404 316L 96490860


100/100

120/120

100/100

120/120

AMG 55.50.335AMG.75.58.336AMG.110.68.334

Stainless steel





Stainless steel

Stainless steel

Stainless steel

AMG.150.73.354AMG.185.78.351

Stand with winch, the winch includes 8 m wire for 5 m tank depth standard installation


AMG 55.50.335AMG.75.58.336AMG.110.68.334

Aluminium - - 96489565



AMG.55.50.335AMG.75.58.336AMG.110.68.334




AMG.55.50.335AMG.75.58.336AMG.110.68.334

Key for turning the column profile tube 96494545


Accessories >18

AFG

1 Bottom plate, fixed 2 Column profile tube 3 Depth bloker welded to the column tube 4 Motor bracket 5 Top fixation 6 Tension cable 9 Crane with winch 10 Platform

Pos. Accessories

AFG flowmaker installation

Accessories >19

1.4306 304L 96489415 1.4404 316L 96489416

1.4306 304L 96489411 1.4404 316L 96489414

Flowmaker Material DIN W.-Nr. AISI Product numberColumnsize

100/100

100/100

AFG.15.130.96AFG.22.130.77AFG.30.130.92AFG.40.130.93

Stainless steel



Stainless steelAFG.15.230.22AFG.22.230.25AFG.30.230.29AFG.40.230.35

Bottom plate

1.4306 304L 96489449 1.4404 316L 96489460 1.4306 304L 96489461 1.4404 316L 96489462

Flowmaker Type Material DIN W.-Nr. AISI Product numberColumnsize

100/100

AFG.15.130.76AFG.22.130.77AFG.30.130.92AFG.40.130.93

For welding

100/100For welding

Stainless steel

Stainless steel



AFG.15.230.22AFG.22.230.25AFG.30.230.29AFG.40.230.35

Depth blocker

1.4306 304L 96490749 1.4404 316L 96490750

1.4306 304L 96490752 1.4404 316L 96490753


100/100

100/100

AFG.15.130.76AFG.22.130.77AFG.30.130.92AFG.40.130.93

Stainless steel



Stainless steelAFG.15.230.22AFG.22.230.25AFG.30.230.29AFG.40.230.35

Motor bracket

1.4306 304L 96489526 1.4404 316L 96489527


100/100All AFG typesStainless steel


Top fixation

All AFG types Aluminium 96489566Flowmaker Material Product number

Crane with winch. The winch includes 8 m wire for 5 m tank depth and a three-pronged hook


Flowmaker Material DIN W.-Nr. AISI Product number

AFG.15.130.76AFG.22.130.77AFG.30.130.92AFG.40.130.93

Stainless steel

Platform


Flowmaker Material DIN W.-Nr. AISI Product number

All AFG types

Tension cable set. The cable includes 4 m wire and tension adjuster

Accessories >20

1.4306 304L 96489420 1.4404 316L 96489421 Galvanized steel 1.0037 - 96489594 1.4306 304L 96489426 1.4404 316L 96489427 Galvanized steel 1.0037 - 96489595 1.4306 304L 96489429 1.4404 316L 96489440 Galvanized steel 1.0037 - 96489596 1.4306 304L 96489441 1.4404 316L 96489442 Galvanized steel 1.0037 - 96489597 1.4306 304L 96489443 1.4404 316L 96489444 Galvanized steel 1.0037 - 96489598 1.4306 304L 96489445 1.4404 316L 96489446 Galvanized steel 1.0037 - 96489599

* Use of column profile tube 120 x 120 mm for AFG requires reduction piece, 120 to 100 mm, for bottom plate, see below.

Column size Material DIN W.-Nr. AISI Product number

60/60/3

80/80/3

100/100/3

100/100/4

100/100/5

120/120/5 *

Stainless steel

Stainless steel

Stainless steel

Stainless steel

Stainless steel

Stainless steel

Column profile tube

Material specification and product numbers of column profile tube. The numbers include 1 m column tube.When ordering, please state desired length


Size [mm] Material DIN W.-Nr. AISI Product number

120 to 100 (column size)

Stainless steel

Reduction piece

Relay for leakage sensor, Type ETA-20/A - - 96489569Power cable 1) A07RN-F 12G1.5 - - 96489580Power cable 1) A07RN-F 12G2.5 - - 96489581Power cable 1) A07RN-F 12G4 - - 96494351Cable clamp set for AMD and AMG 2) For 1.5 mm2 cable - - 96494352Cable clamp set for AMG 2) For 2.5 and 4 mm2 cable - - 96494354Cable clamp set for AFG 3) For 1.5 mm2 cable - - 96494356Pull and safety chain for AMD and AMG 1) Stainless steel 1.4404 316L 96489583Wire cable, Ø4 mm for AMD 1) Stainless steel 1.4404 316L 96490921Wire cable, Ø6 mm for AMG and AFG 1) Stainless steel 1.4404 316L 96489590

1) The numbers include 1 m cable/wire. When ordering, please state the desired length.2) Each set includes one cable clamp, snap hook and wire clamp. A total of one set is needed per one meter of tank depth.3) Each set includes one cable clamp. A total of one set is needed per one meter of tank depth.

Description Material DIN W.-Nr. AISI Product number

Miscellaneous

AMD, AMG, AFG

21

Dimensions

Technical data >

Mixers types AMD and AMG

Type

AMD.18.32.950 320AMD.28.39.930 390AMG.15.40.325 720 417AMG.22.45.325 735 452AMG.30.47.328 750 480AMG.40.32.326 760 525AMG.55.50.335 980 505AMG.75.58.336 990 270 500 580AMG.110.68.334 1010 455 680AMG.150.73.354 1160 730AMG.185.78.351 1180 780

A B C D E

Dimensions [mm]

587 210 315 300

200 305 400

315 630

Flowmakers type AFG

Type

AFG.15.130.76 AFG.22.130.77 AFG.30.130.92 AFG.40.130.93 AFG.15.230.22 AFG.22.230.25AFG.30.230.29AFG.40.230.35

A B C D E

Dimensions [mm]

795 200 353 500 1300

1100 302 540 450 2300

>22

Heavy-duty submersiblesewage pumps

Brochure covers the Grundfos rangeof submersible channel impeller

pumps from 1.65 kW up to 21 kWand SuperVortex pumps up to

29 kW. All designed for handlingunscreened raw sewage.

Heavy-duty submersiblesewage pumps

Brochure covers the Grundfosrange of sewage pumps from 16 kW

up to 155 kW for handling of rawsewage in heavy-duty applications.

Super heavy-duty submersible sewage andraw water pumpsBrochure covers the Grundfosrange of super-heavy-duty channel-impeller pumps, axial-flow pumps,and propeller pumps from 2.8 kWup to 520 kW.

Sewage grinder pumpsBrochure covers the new Grundfos range of sewage grinder(SEG) pumps for pumping ofwastewater with toilet discharge.

Stainless steel pumps forpumping of corrosive liquids

Brochure covers the Grundfosrange of heavy-duty stainless

steel pumps (SEN) for aggressiveand corrosive environments.

The KP/AP stainless steel pumps

Brochure covers a wide range ofhigh-quality stainless steel pumps

for a variety of domestic and commercial applications.

Lifting stationsBrochure covers Grundfos lifting stations for individual as well as multi-user applications.

Portable dewatering pumpsBrochure covers the Grundfos rangeof portable dewatering pumps (DW)from 0.8 kW to 20 kW for pumpingof raw water with abrasives.

ControlsBrochure covers the Grundfos

range of controls for the waste-water pumping systems.

The range >23

The Grundfos wastewater range

Being responsible is our foundationThinking ahead makes it possible

Innovation is the essence

www.grundfos.com

Business with an attitude

Knowledge The sharing of knowledge, experience

and expertise across our global network will always

lead our business forward.

Innovation Combining the best technology with

fresh ways of thinking, we will continue to develop

even better pumps, systems, services and standards.

Solution With a complete product range, capable

of providing every conceivable water solution, we are

the most complete player on the market.

96

49

53

57 1

0 0

2V

ENTU

RE

MA

RK

ETIN

G A

S

GRUNDFOS WASTEWATER

Mixers and flowmakers

Documents

Full range of efficient and reliable submersible mixers and flowmakers ...notesfile... · Powerful advantages > Lifelong reliability Grundfos mixers and flowmakers are of a robust