81
Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence the rate at which different types of material freeze, melt, or evaporate.

Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

Embed Size (px)

Citation preview

Page 1: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

Freezing, Melting, and Evaporation

SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation.

SPI 0507.9.3 Describe factors that influence the rate at which different types of material freeze, melt, or evaporate.

Page 2: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

Part 1 - Definitions Melting Freezing Boiling Evaporating Condensing Sublimating

Page 3: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

Melting To melt means to change

a substance from a solid to a liquid state by heating it to the melting point. Different substances melt at different temperatures. Water melts at 0°C or 32°F.

Page 4: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

Freezing

To freeze means to change a substance from a liquid to a solid state by cooling it to the freezing point.

Page 5: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

Temperatures The freezing and melting temperatures for

most substances are the same. For water this is 0°C or 32°F.

Read Workbook pages 180-181

Page 6: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

Boiling Point The boiling point is

the temperature at which a liquid changes to a vapor or gas. Again this is a different temperature for different substances. For water the boiling point is 100°C or 212°F.

Page 7: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

Evaporation Evaporation is the change

of a liquid into a vapor at a temperature below the boiling point. This occurs at any temperature between the melting point and the boiling point. However, the warmer the temperature the more quickly the water will evaporate.

Page 8: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

Condensation

Condensation is the change of a gas or vapor to a liquid, either by cooling it or by subjecting the substance to an increase in pressure. When water vapor cools in the atmosphere, it condenses into tiny drops of water which form clouds.

Read Workbook page 187

Page 9: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

Sublimation

Sublimation is the process of changing from a solid to a gas without passing through a liquid phase.

Read Workbook page 188

Page 10: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

Practice – Number your paper from 1 to 10.

Decide the state or phase for each item. Is it . . . Melting Freezing Boiling Evaporating Condensing Sublimating

Page 11: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

1. In which state is the snow?

a) Melting

b) Freezing

c) Boiling

d) Evaporating

e) Condensing

f) Sublimating

Page 12: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

2. In which state is the puddle? (Choose 2 answers.)

a) Melting

b) Freezing

c) Boiling

d) Evaporating

e) Condensing

f) Sublimating

Page 13: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

3. In which state is the fog?

a) Melting

b) Freezing

c) Boiling

d) Evaporating

e) Condensing

f) Sublimating

Page 14: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

4. In which state is the moisture on the bottle?

a) Melting

b) Freezing

c) Boiling

d) Evaporating

e) Condensing

f) Sublimating

Page 15: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

5. In which state is the puddle on the road?

a) Melting

b) Freezing

c) Boiling

d) Evaporating

e) Condensing

f) Sublimating

Page 16: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

6. In which state is the road?

a) Melting

b) Freezing

c) Boiling

d) Evaporating

e) Condensing

f) Sublimating

Page 17: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

7. In which state is the moisture on the leaf petals?

a) Melting

b) Freezing

c) Boiling

d) Evaporating

e) Condensing

f) Sublimating

Page 18: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

8. In which state is the water in the tea pot?

a) Melting

b) Freezing

c) Boiling

d) Evaporating

e) Condensing

f) Sublimating

Page 19: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

9. In which state is the ice next to the mountain?

a) Melting

b) Freezing

c) Boiling

d) Evaporating

e) Condensing

f) Sublimating

Page 20: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

10. In which state is the water vapor?

a) Melting

b) Freezing

c) Boiling

d) Evaporating

e) Condensing

f) Sublimating

Page 21: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

Answers

Page 22: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

1. In which state is the snow?

a) Melting

Page 23: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

2. In which state is the puddle?

a) Melting

b) Freezing

Page 24: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

3. In which state is the fog?

e) Condensing

Page 25: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

4. In which state is the moisture on the bottle?

e) Condensing

Page 26: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

5. In which state is the puddle on the road?

d) Evaporating

Page 27: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

6. In which state is the road?

b) Freezing

Page 28: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

7. In which state is the moisture on the leaf petals?

e) Condensing

Page 29: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

8. In which state is the water in the tea pot?

c) Boiling

Page 30: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

9. In which state is the ice next to the mountain?

f) Sublimating

Page 31: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

10. In which state is the water vapor?

d) Evaporating

Page 32: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

Part 2

Factors that influence the rate

of Evaporation

Page 33: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

Video

video.flv

video.mp4

Page 34: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

Factor 1 - Temperature

The higher the temperature the faster the rate of evaporation.

Page 35: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

Which puddle will evaporate faster?

A B

Page 36: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

Factor 2 - Wind The more wind or air circulation the faster

the rate of evaporation.

Page 37: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

Which puddle will evaporate faster?

A B

Page 38: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

Factor 3 – Exposed Surface AreaThe larger the exposed surface area the

faster the evaporation rate.

The water will evaporate more quickly from the beaker on the right with the wider opening.

3 inches1 inch

Page 39: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

If each beaker contains 8 ounces of water, which beaker will evaporate the quickest?

Page 40: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

Factor 4 - Humidity When humidity (the amount of water vapor

in the air) is high, evaporation is slower.

Page 41: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

In which location would laundry hanging on a line dry the quickest?A) Desert

Humidity = 30%

B) Nice Day Humidity =60%

C) Rainy DayHumidity = 100%

D) TropicsHumidity = 90%

Read Workbook page 189

Page 42: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

Online Activity

Effect of Humidity & Temperature on Evaporation http://www.fossweb.com/modules3-6/Water/activities/evaporation.dcr

Page 43: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

Part 3

Factors that influence the rate of Melting or Freezing

Page 44: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

Factor 1 - Temperature

Remember the freezing/melting point of water is 0°C or 32°F.

The higher the temperature the faster water will melt.

The lower the temperature the faster water will freeze.

Page 45: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

Factor 2 - Size and Shape

If you have two equal masses of ice – one in a solid block and the other in smaller pieces - the smaller pieces will melt faster.

Page 46: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

Factor 2 - Size and Shape (cont.)

Just like with evaporation, the more surface area exposed to heat the faster water will melt. Likewise, the more surface area exposed to cold, the faster water will freeze.

Page 47: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

In which cup will the ice melt quicker?

A B

Page 48: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

Factor 3 – Conduction Think about this. People control the

temperature of food by placing it into styrofoam containers. Styrofoam is a poor conductor of heat. A styrofoam container will not change temperature quickly. This is why when you buy a cup of hot chocolate, it will probably come in a styrofoam cup. Your hot chocolate will stay warm longer and your hand will not get burned.

Page 49: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

Heat Transfer If you place equal amounts of hot water into

two containers - a metal container (a good conductor of heat) and a wooden container (a poor conductor of heat) - the water in the metal container would cool faster.

Page 50: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

Cold Transfer

Any time you place equal amounts of water at the same temperature into two containers – one a good conductor of heat and one a poor conductor of heat. The container made from a good conductor of heat will speed up the cooling of the water by conduction.

Page 51: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

In which cup could you freeze 6 ounces of water the fastest?

A) plastic B) metal

C) Styrofoam D) wood

Page 52: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

Factor 4 – Changing the Composition

During the cold and icy winter, you have probably experienced salt on sidewalks and roads. It is used to melt the ice and snow and keep it from refreezing. The freezing point of water becomes lower as more particles are added until the point where the salt stops dissolving.

Page 53: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

By adding salt to icy roads, you change the freezing/melting from 0°C to point to -9°C.

Page 54: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

Review – Four Factors that influence the rate of Melting or Freezing

Factor 1 – Temperature (The hotter the air temperature the faster ice melts; the colder the air temperature faster water freezes.)

Factor 2 - Size and Shape (Larger pieces of ice melt more slowly than an equal mass of smaller pieces.)

Page 55: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

Factor 3 – Conduction (Water in containers which are good conductors of heat will cool more quickly.)

Factor 4 – Changing the Composition (Mixing water with other compounds such as salt will influence the melting/freezing point.)

Page 56: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

Practice – Number your paper from 1 to 12.

Answer the following questions about factors that influence the rate at which different types of material freeze, melt, or evaporate.

Page 57: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

1. Falling temperatures can affect the water cycle by ______.

a) creating larger raindrops

b) changing precipitation from rain to snow

c) creating smaller raindrops

d) changing the path of water runoff

Page 58: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

2. How does adding salt to water affect the temperature?

a) The melting point increases to a higher temperature.

b) The freezing point increases to a higher temperature.

c) Salt does not affect the temperature of water.

d) The freezing point decreases to a lower temperature.

Page 59: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

3. Under which of the following conditions will water evaporate the slowest?

a) Humidity = 95% b) Humidity = 80%

c) Humidity = 30% d) Humidity = 70%

Page 60: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

4. You are going camping for three days. You need to buy ice that will keep your ice chest cool for the entire 3 day trip. Which would be the best ice to buy?

a) one large block of ice

b) many small cubes

c) crushed

ice

d) brightly

colored cubes

Page 61: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

5. At which of the following ground temperatures will the puddle evaporate the fastest?

a) 50°C b) 15°C

c) 29°C d) 87°C

Page 62: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

6. Your little sister forgot to turn off the water in the bathroom sink. The water overflowed and soaked the carpet. You want to dry the carpet out before your mother gets home. At which level should you turn on the fan?

a) low b) high

c) medium d) The carpet would dry out faster without a fan.

Page 63: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

7. Students are investigating whether wind affects the rate at which the sponge will dry. Which experiment is best to use in answering their question?

a) b)

c) d)

Page 64: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

8. Which cup will keep your coffee hot for the longest amount of time?

a) silver b) copper

c) styrofoam d) steel

Page 65: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

9. Each of the following containers hold exactly10 ounces of water. From which container will water evaporate the fastest?

a) b)

c) d)

Page 66: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

10. Which letter represents evaporation?

Page 67: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

11. At which temperature will the the icicles elt the quickest?

a) 50°C b) 15°C

c) 29°C d) 87°C

Page 68: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

12.

Page 69: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

Answers

Page 70: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

1. Falling temperatures can affect the water cycle by ______.

a) creating larger raindrops

b) changing precipitation from rain to snow

c) creating smaller raindrops

d) changing the path of water runoff

Page 71: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

2. How does adding salt to water affect the temperature?

The melting point increases to a higher temperature.

The freezing point increases to a higher temperature.

Salt does not affect the temperature of water.

The freezing point decreases to a lower temperature.

Page 72: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

3. Under which of the following conditions will water evaporate the slowest?

a) Humidity = 95% b) Humidity = 80%

c) Humidity = 30% d) Humidity = 70%

Page 73: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

4. You are going camping for three days. You need to buy ice that will keep your ice chest cool for the entire 3 day trip. Which would be the best ice to buy?

a) one large block of ice

b) many small cubes

c) crushed

ice

d) brightly

colored cubes

Page 74: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

5. At which of the following ground temperatures will the puddle evaporate the fastest?

a) 50°C b) 15°C

c) 29°C d) 87°C

Page 75: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

6. Your little sister forgot to turn off the water in the bathroom sink. The water overflowed and soaked the carpet. You want to dry the carpet out before your mother gets home. At which level should you turn on the fan?

a) low b) high

c) medium d) The carpet would dry out faster without a fan.

Page 76: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

7. Students are investigating whether wind affects the rate at which the sponge will dry. Which experiment is best to use in answering their question?

a) b)

c) d)

Page 77: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

8. Which cup will keep your coffee hot for the longest amount of time?

a) silver b) copper

c) styrofoam d) steel

Page 78: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

9. Each of the following containers hold exactly10 ounces of water. From which container will water evaporate the fastest?

a) b)

c) d)

Page 79: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

10. Which letter represents evaporation?

Page 80: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

11. At which temperature will the icicles melt the quickest?

a) 50°C b) 15°C

c) 29°C d) 87°C

Page 81: Freezing, Melting, and Evaporation SPI 0507.9.2 Describe the differences among freezing, melting, and evaporation. SPI 0507.9.3 Describe factors that influence

12.