FRABOPRESS 316 BIG-SIZE Specification

page 1

SPECIFICATION

FRABOPRESS 316 BIG-SIZESTAINLESS STEEL PRESS FITTINGS WITH M PROFILE

FRABOPRESS 316 BIG-SIZE Specification

SPECIFICATION: FRABOPRESS 316 BIG-SIZE

INDEX

1. Description of FRABOPRESS 316 BIG-SIZE SYSTEM page. 3

2. Fittings page. 42.1 Elbows and bends page. 42.2 Tee fittings page. 52.3 Couplings page. 62.4 Stop ends page. 82.5 Flange adapter page. 82.6 Sealing element page. 8

3. Pipes page. 93.1 Pipes 1.4404 page. 93.2 Elbows page. 9

page 2

FRABOPRESS 316 BIG-SIZE Specification

1.DESCRIPTION OF FRABOPRESS 316 BIG-SIZE SYSTEM

FRABOPRESS 316 BIG-SIZE is a system made of pipes and fittings in stainless steel, material type 1.4401 (AISI 316L), complying with the requirements of UNI 11179 Class 1 standard, equipped with a cylindrical guide for the correct and safe insertion of the pipe and a preassembled elastomeric sealing element in black EPDM complying with UNI EN 681-1 standard.

Press ends with diameter of 76, 89 and 108 are in M profile and they must be installed with the appropriate equipment. Press ends with smaller diameter can be in M or in V profile. Refer to AX0131 and AMX131 model and to AX0243 and AMX243.

The pressing of the fittings is to be carried out with a suitable tool and with a correctly maintained pressing jaw, so as to achieve an indissoluble cold junction, resistant to torsion, and a hydraulic seal guaranteed by the O-ring. The right junction of Frabo fittings guarantees the use of the system considering a maximum temperature of 110 ° C, a minimum temperature of -10 ° C and a maximum pressure of 10 bar (conditions related to the transport of water).

FRABOPRESS 316 BIG-SIZE system can be used for the following applications:

- Sanitary water circuit systems- Drinking water circuit systems- Heating and cooling** circuit systems- Oil free compressed air circuit systems (residual oil <5 mg/m³) - Fire prevention systems according to UNI 10779*- Sprinkler units according to UNI 12845*- Industrial plants

* Sprinkler fire-fighting systems. Please contact our technical department for further information regarding fire protection applications.

** any additives contained in the cooling media must be compatible with the EPDM O-rings

Temperature and pressure for each application are available on Frabo technical documents www.frabo.com

For uses other than those mentioned thus far, please contact the FRABO technical support office.

page 3

FRABOPRESS 316 BIG-SIZE Specification

Pipes available for FRABOPRESS 316 BIG-SIZE system are:

- Pipes made of austenitic AISI 316 stainless steel - X2 CrNiMo 17-12-2 - Material number 14404 (EN 10088 standard) according to the specifications of the work sheet DVGW - GW541 (Stainless steel pipes for drinking water systems) and EN 10312 standard.

2.FITTINGS

2.1 Elbows and bends

Frabo elbow with press ends, FRABOPRESS 316 BIG-SIZE model, for AISI 316L stainless steel pipes (material 1.4401), with EPDM elastomeric sealing element. The fittings must be pressed with the suitable tool, correctly maintained and set up, indicated as compatible by the system manufacturer.

Elbow 90° MF, FRABOPRESS 316 BIG-SIZE, Model AX000176,188,9108

Elbow 90° FF, FRABOPRESS 316 BIG-SIZE, Model AX000276,188,9108

Elbow 45° FF, FRABOPRESS 316 BIG-SIZE, Model AX004176,188,9108

Elbow 45° MF, FRABOPRESS 316 BIG-SIZE, Model AX004076,188,9108

page 4

FRABOPRESS 316 BIG-SIZE Specification

2.2 Tee fittings

Frabo tee fittings with press ends, FRABOPRESS 316 BIG-SIZE model, for AISI 316L stainless steel pipes (material 1.4401), with EPDM elastomeric sealing element. The fittings must be pressed with the suitable tool, correctly maintained and set up, indicated as compatible by the system manufacturer.

Female tee fitting, FRABOPRESS 316 BIG-SIZE, Model AX0130 76,1x76,1x76,188,9x88,9x88,9108x108x108

Female tee fitting, FRABOPRESS 316 BIG-SIZE, Model AX0131 (press ends <76,1mm are in V Profile)76,1x22x76,176,1x28x76,176,1x35x76,176,1x42x76,176,1x54x76,188,9x22x88,988,9x28x88,988,9x35x88,988,9x42x88,988,9x54x88,9108x22x108108x28x108108x35x108108x42x108108x54x108

Female tee fitting, FRABOPRESS 316 BIG-SIZE, Model AMX131 (press ends <76,1mm are in M Profile)76,1x22x76,176,1x28x76,176,1x35x76,176,1x42x76,176,1x54x76,188,9x22x88,988,9x28x88,988,9x35x88,988,9x42x88,988,9x54x88,9108x22x108108x28x108108x35x108108x42x108108x54x108

page 5

FRABOPRESS 316 BIG-SIZE Specification

Frabo tee fitting with pressed end and threaded end, FRABOPRESS 316 BIG-SIZE model, for AISI 316L stainless steel pipes (material 1.4401), with EPDM elastomeric sealing element. The fittings must be pressed with the suitable tool, correctly maintained and set up, indicated as compatible by the system manufacturer. Thread is made in accordance with EN 10226-1.

Female tee fitting, Rp thread, FRABOPRESS 316 BIG-SIZE, Model AXF130 2x76,13/4x76,12x88,93/4x88.92x1083/4x108

2.3 Couplings

Frabo coupling with pressed end and threaded end, FRABOPRESS 316 BIG-SIZE model, for AISI 316L stainless steel pipes (material 1.4401), with EPDM elastomeric sealing element. The fittings must be pressed with the suitable tool, correctly maintained and set up, indicated as compatible by the system manufacturer. Thread is made in accordance with EN 10226-1.

Female coupling, Rp thread, FRABOPRESS 316 BIG-SIZE, Model AXF270 2.1/2x76,13x88,94x108

Female coupling, R thread, FRABOPRESS 316 BIG-SIZE, Model AXF243 76,1x2.1/288,9x3108x4

Frabo coupling with stop and pressed ends, FRABOPRESS 316 BIG-SIZE model, for AISI 316L stainless steel pipes (material 1.4401), with EPDM elastomeric sealing element. The fittings must be pressed with the suitable tool, correctly maintained and set up, indicated as compatible by the system manufacturer.

Coupling with stop FF, FRABOPRESS 316 BIG-SIZE, Model AX027076,188,9108

Frabo slip coupling with pressed ends, FRABOPRESS 316 BIG-SIZE model, for AISI 316L stainless steel pipes (material 1.4401), with EPDM elastomeric sealing element. The fittings must be pressed with the suitable tool, correctly maintained and set up, indicated as compatible by the system manufacturer.

Slip coupling FF, FRABOPRESS 316 BIG-SIZE, Model AX027176,188,9108

page 6

FRABOPRESS 316 BIG-SIZE Specification

Frabo fitting reducer with pressed ends, FRABOPRESS 316 BIG-SIZE model, for AISI 316L stainless steel pipes (material 1.4401), with EPDM elastomeric sealing element. The fittings must be pressed with the suitable tool, correctly maintained and set up, indicated as compatible by the system manufacturer.

Fitting reducer MF, FRABOPRESS 316 BIG-SIZE, Model AX0243 (press ends <76,1mm are in V Profile)76,1x4276,1x5488,9x5488,9x76,1108x54108x76,1108x88,9

Fitting reducer MF, FRABOPRESS 316 BIG-SIZE, Model AMX243 (press ends <76,1mm are in M Profile)76,1x4276,1x5488,9x54108x54

page 7

FRABOPRESS 316 BIG-SIZE Specification

2.4 Stop ends

Frabo stop end with pressed ends, FRABOPRESS 316 BIG-SIZE model, for AISI 316L stainless steel pipes (material 1.4401), with EPDM elastomeric sealing element. The fittings must be pressed with the suitable tool, correctly maintained and set up, indicated as compatible by the system manufacturer.

Female stop end, FRABOPRESS 316 BIG-SIZE, Model AX030276,188,9108

2.5 Flange adapter

Frabo flange adapter PN16 with pressed ends, FRABOPRESS 316 BIG-SIZE model, for AISI 316L stainless steel pipes (material 1.4401), with EPDM elastomeric sealing element (maximum pressure 10/16 bar depending on the application). The fittings must be pressed with the suitable tool, correctly maintained and set up, indicated as compatible by the system manufacturer.

PN16 Flange adapter with F press connection, FRABOPRESS 316 BIG-SIZE, Model AX027376,188,9108

2.6 Sealing elements

EPDM O-ring, maximum operating temperature 110 ° C, minimum -10 ° C.

EPDM O-ring EPDM for FRABOPRESS 316 BIG-SIZE fittings, Model EPDM (Ø fitting)76,188,9108

page 8

FRABOPRESS 316 BIG-SIZE Specification

3.PIPES

3.1 Pipe 1.4404

FRABOPRESS 316 BIG-SIZE pipes are thin-walled welded pipes made in AISI 316L austenitic stainless steel (material 1.4404) marked according to EN 10312 standard and DVGW GW 541 worksheet. Available in 6m long bars. 3m long bars are available on request.

Pipe in AISI316L stainless steel, Model AXTB0076,188,9108

3.2 Elbows

Elbow, model FRABOPRESS 316 BIG-SIZE, made of thin-walled welded pipes in AISI 316L austenitic stainless steel (material 1.4404), according to EN 10312.

Elbow 15°, Frabopress 316 Secufrabo, Model AX001576,188,9108

Elbow 30°, Frabopress 316 Secufrabo, Model AX003076,188,9108

Elbow 45°, Frabopress 316 Secufrabo, Model AX004576,188,9108

Elbow 60°, Frabopress 316 Secufrabo, Model AX006076,188,9108

Elbow 75°, Frabopress 316 Secufrabo, Model AX007576,188,9108

page 9

FRA.BO S.p.A.

Via Cadorna, 30 - 25027 Quinzano d’Oglio (BS) Italy

HEADQUARTERMANUFACTURING UNIT Via Circonvallazione, 7- 26020 Bordolano (CR) - ItalyT +39 030 99 25 711 F +39 030 99 24 127 @ info@frabo.com W

FRABOPRESS 316 BIG-SIZE Specification

page 10